91 jobs found

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. This position does not allow for sponsorship or relocation support. Essential Responsibilities Become proficient in PAD solutions and offerings Review and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures. Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith. Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC AcSELerator Diagram Builder Use common industrial communication protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP 3.0, etc. Develop PLC based electrical system monitoring and controls solutions. Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as required Ensure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services. Provide technical guidance to internal and external stakeholders, including after sales support. Minimum Qualifications BS in a technical discipline, preferably an Electrical Engineer, from an accredited institution with a minimum of seven (7) + years of relevant work experience Expertise and experience in at least one of the following is required: Automation and Control systems Protective Relay programming and commissioning PLC applications for Switchgear Experience developing, integrating, installing, and commissioning industrial control systems using PLC and HMI solutions. Experience with PLC logic programming and HMI programming. Experience with Rockwell, Schneider, Siemens, and ABB software a plus Experience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc. Knowledge of 3 phase power is required Experience configuring, testing, and commissioning relays. Experience with SEL, GE, and Siemens microprocessor relays is plus. Skills, Abilities & Other Requirements Excellent customer relation, verbal, and written communication skills Strong analytical and trouble shooting skills Able to work effectively in a team setting or independently, able to adapt to change, self-starter, innovative, and willing to make a difference Able to mentor less experienced engineers Willingness to travel locally at least 25% More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience The Lead Engineer level requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience AS A PAD AUTOMATION ENGINEER YOU WILL: Become proficient in PAD solutions and offerings Review and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures. Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith. Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI Use common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0. Develop PLC based electrical system monitoring and controls solutions. Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as required Ensure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services. Provide technical guidance to internal and external stakeholders, including after sales support. Minimum Qualifications BSEE or equivalent from an accredited institution General knowledge of at least one of the following: Automation and Control systems Power Systems Protective Relaying Skills, Abilities & Other Requirements Previous experience in automation, PLC control systems, or protective relaying a plus Customer service oriented Able to work effectively in a team setting or independently, able to adapt to change, self-motivated, innovative, and willing to make a difference Excellent verbal and written communication skills Experience in producing technical documentation and technical reports Strong analytical and trouble shooting skills Working & Environmental Conditions Travel is required for this position. The amount of travel is estimated to be 25% of the time to customer sites. The customer sites can be refineries, utility substation yards or even offshore platforms. The position will contain working in an office environment as well has performing testing on the manufacturing floor with the equipment More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Job Summary: Have you ever dreamed of contributing to the development of groundbreaking technologies? Micron plans to invest more than $250 billion globally over the next decade in groundbreaking manufacturing and R&D, including fab expansion in the United States giving us the opportunity to bring in passionate team members to help us continue to be at the forefront of memory in the World! We have an outstanding opportunity for a high energy, tenacious, ambitious, result driven individual with a strong work ethic and integrity to join our Facilities Team in Boise, Idaho! Micron seeking a Life Safety & Fire Alarms Systems Engineer, to become part of a team that is helping shape the future of how the world uses information. T his is an outstanding opportunity to work at the forefront of technology while supporting the design, operation, and continuous improvement of critical life safety systems within world-class semiconductor manufacturing facilities. Responsibilities: Serve as a technical owner for fire alarm, mass notification, emergency communication, and life safety systems. Review of vendor provided design drawings and specifications for completeness, accuracy and adherence to all applicable design and safety standards and codes including NFPA 72, NFPA 70, NFPA 101, IFC, IBC, and FM Global requirements. Review system configurations, equipment layouts, and distribution routing to ensure functionality, life safety compliance, proper egress, maintainability, constructability, and alignment with P&IDs. Collaborate with multidisciplinary engineering, design, construction, Facilities, EHS, IT, Security, and vendor teams to achieve project objectives. Apply critical thinking and analytical problem-solving skills to Identify, develop, propose, and implement cost effective plans that improve overall equipment and system efficiencies. Support design, installation, testing, commissioning, and sustaining operations of life safety systems. Develop and maintain engineering, operations, and maintenance documentation. Troubleshoot system issues, analyze system performance data, and drive reliability improvements through continuous improvement initiatives. Minimum Qualifications Bachelor's degree in electrical, controls, or related engineering fields. 2 years of experience as a facilities life safety systems engineer within an industrial environment. Technical knowledge of fire detection, fire alarm, suppression, mass notification, emergency communication, and life safety systems. Experience with instrumentation and controls, including sensor integration, control panels, and I/O systems. Working knowledge of NFPA 72, NFPA 70, NFPA 101, NFPA 2001, IBC, IFC, and applicable FM Global requirements. Proficient in reviewing schematics, wiring diagrams, equipment specs, and network layouts. Preferred Qualifications 3+ Years of experience within the Semiconductor Industry. Familiarity with smart building technologies, including IoT-enabled fire detection, intelligent suppression systems, and integrated emergency communication platforms. Professional certifications such as NICET Fire Alarm Systems (Level III or IV preferred) or Certified Fire Protection Specialist (CFPS). Strong understanding of system interoperability and integration with facility-wide platforms such as SCADA, BMS, and DCIM systems. Experience using engineering and design tools such as AutoCAD, Revit, and Navisworks, Siemens, Notifier, Edwards, Simplex, Johnson Controls, or similar fire alarm platforms. Interest or experience in embracing agentic AI to improve engineering and operational processes. As a world leader in the semiconductor industry, Micron is dedicated to your personal wellbeing and professional growth. Micron benefits are designed to help you stay well, provide peace of mind and help you prepare for the future. We offer a choice of medical, dental and vision plans in all locations enabling team members to select the plans that best meet their family healthcare needs and budget. Micron also provides benefit programs that help protect your income if you are unable to work due to illness or injury, and paid family leave. Additionally, Micron benefits include a robust paid time-off program and paid holidays. For additional information regarding the Benefit programs available, please see the Benefits Guide posted on . Micron is proud to be an equal opportunity workplace and is an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, citizenship status, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state, or local laws. To learn about your right to work click here. To learn more about Micron, please visit For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron's People Organization at or 1- (select option ) Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. As part of the global controls team, you will work with highly motivated experts and innovators in the data center industry. You will be responsible for troubleshooting, project management, and maintaining the building management system (BMS) and electrical power monitoring system (EPMS). Using Amazon leadership principles, you will develop new processes and standards while innovating in the controls space. AWS Data centers have multiple components such as generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers air-cooled and water-cooled , pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. All these components have local control systems that interact with each other via open and/or proprietary communications protocols. The BMS is the primary method of control of all mechanical systems within a data center. The EPMS is the primary method of monitoring all electrical systems within a data center. Key job responsibilities • Train and assist internal customers and stakeholders with the creation, design, configuration, validation, installation, commissioning and operation of BMS and EPMS systems. • Provide technical assistance and support to operations during life cycle of the data center. • Review results and action items from the quarterly maintenances for BMS and EPMS and take actions to get them resolved. • Develop BMS & EPMS projects scope of work, schedule, budget, and level of efforts (LOE) to projects requested by customers and stakeholders. • Manage scope, schedule, finance and execution of BMS and EPMS improvement projects in AWS data centers. • Assist in procurement related activities including request for quotation/proposals, responding to request for information, review of vendors proposal and issuance of purchase orders. • Participate in AWS global on-call schedule to provide immediate BMS and EPMS technical support to in-service data centers. • Attend project related meetings, coordinate with project leaders and regularly report status to Controls and stakeholder's management. • Support Controls projects related commissioning activities in the data centers. • Review, implement, troubleshoot and iterate on the controls sequence of operation (SOO) and provide necessary feedback to the design team. • Develop and modify controls logic programming and graphical user interfaces. • Manage multiple stakeholder deliverables, requirements and navigate challenging situations. • Financially manage BMS and EPMS service contracts. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor's work to ensure compliance with the scope, design, SOO and applicable local codes. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 5+ years of industrial controls and automation experience - 4+ years of general contractor and vendor management work (request for proposals, bidding, change orders, quality control, RFI/submittal tracking) associated with construction and project execution experience - Bachelor's degree in Mechanical Engineering, Electrical Engineering, or an equivalent engineering science plus 5+ years of relevant controls experience, OR 10+ years of relevant controls experience in lieu of a degree. PREFERRED QUALIFICATIONS - Master's degree in mechanical engineering, electrical engineering, material science, physics or equivalent, or MS degree - Experience designing, configuring, programming, installing, troubleshooting or servicing HVAC Controls or Electrical SCADA systems application specific controllers, software and networks. - Experiencing using common industrial communication protocols (MQTT, BACnet and/or MODBUS). - Demonstrated understanding of engineering documentation, electrical and mechanical diagrams, and standard operating procedures. - Ability to manage multiple stakeholder deliverables, requirements, and navigate difficult situations. - Experience designing data centers or critical MEP infrastructure - Registered as a Professional Engineer (PE), or certified Project Management Professional (PMP). Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Herndon - 111 100.00 USD annually

Job Description Job Description Wunderlich-Malec Engineering (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: - 100% employee-owned company with over 40 years of industry history - A Top 5 Systems Integrator Giant - ENR top 500 firm at The Controls and OT Engineer will interact directly with the customer and could lead a team of Wunderlich-Malec engineers in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying automation solutions. This position requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Controls and OT Engineer demonstrates success by securing repeat work with both new and existing customers. Major Responsibilities This position requires the ability to deliver innovative automation solutions and design standards either self-directed or as a leader of a team. The candidate must have the ability to conceptualize, detail, and implement control systems for industrial processes and machinery that meet our customer's requirements. This involves the development of a control system architecture, selecting the components to be used, detailing schematic diagrams and system documentation, programming controllers (PLC, DCS, RTU), programming the process visualization (HMI/SCADA), developing databases for archiving/displaying historical system data and implementing/commissioning the control system at the client's facility. Knowledge of controller programming languages such as Ladder, Sequential Function Chart, Structured Text, and others to achieve the desired results is preferred. Also having knowledge of standard programming languages such as VBA, .NET, and SQL for the development of HMI/SCADA systems is required For larger systems, experience with industrial networking used to connect control system components and instrumentation is preferred. The Controls Engineer will design, document, and implement a variety of fiber, wired, and wireless systems using industrial protocols (Ethernet/IP, Profinet, Modbus, etc.). The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide junior engineers and technicians. Could also act as Project Manager on smaller projects Minimum Requirements Education A Bachelor of Science degree in Electrical/Control Engineering, Mechanical Engineering, Chemical Engineering, or Computer Science is preferred. Required Experience 6+ years with capabilities in the below areas: In-depth understanding of HMI/SCADA hardware/software platforms such as ICONICS Genesis64, Wonderware ArchestrA System Platform, GE CIMPLICITY, GE iFIX, Rockwell Automation FactoryTalk View, Schneider, and Siemens Various 3rd party web-based data integrations for monitoring and troubleshooting aid Develop work processes to automate template and instance development within the System Platform Provide technical leadership on design standards around graphics, alarming, and scale-up SQL, .NET, Power BI, Grafana, and APIs Understanding of PLC hardware/software platforms such as Rockwell Automation, Siemens, and Modicon In-depth understanding of DCS hardware/software platforms such as Emerson DeltaV or similar Experience in industries such as Food and Beverage, Oil & Gas, and/or Material and Grain Handling Experience in design of electrical schematics, including power distribution under 480VAC, control panels, and associated NEC references desired Experience with AutoCAD is also desired Experience leading a team of engineers/technicians to provide control system solutions a plus Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Ability to travel up to 30%. Physical Demands of Position Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing, and pulling. Working Environment Standard office environment, on-site office environment, diverse industrial environments, frequent use of a personal computer, facsimile/copy machines, phones. Our People Empowered Employee-Owners - As owners of Wunderlich-Malec, we are invested in its success. We hire top talent and empower them to take initiative, drive innovation, and deliver impactful solutions Motivated & Rewarded - We invest in continuing education and offer world-class benefits, ensuring our employee-owners stay motivated, fulfilled, and future-ready Positive & Committed - Our experts bring long-term dedication and a positive, can-do attitude to every project Industry-Smart - Recognized leaders in their fields, our employee-owners stay sharp through ongoing training and deep knowledge of evolving industry trends Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance Salary Range The expected salary range is $85,000 - $150,000 per year depending on qualifications plus a discretionary bonus and employee stock program.

Job Description Job Description Company Overview: Muth Power Solutions is an Automation and Controls division of Muth Electric, dedicated to delivering innovative solutions and superior service to our clients nationwide. With a focus on excellence and a commitment to continuous improvement, we are seeking a talented Control Systems Developer to join our dynamic team and drive the development and implementation of advanced control systems. Position Overview: As the Control Systems Developer at Muth Power Solutions, you will be responsible for leading a team of talented programmers in the design, development, and implementation of control systems tailored to meet the unique needs of our clients. This is a leadership role that requires a combination of technical expertise, project management skills, and a commitment to delivering high-quality solutions. Key Responsibilities: Lead a team of control systems programmers, providing guidance, direction, and mentorship to ensure project success and team development. Collaborate closely with clients, engineers, and stakeholders to understand project requirements and translate them into effective control system designs. Develop control algorithms, logic, and software for various applications including process control, motion control, and automation systems. Program and configure PLCs, DCS (Distributed Control Systems), SCADA (Supervisory Control and Data Acquisition) systems, and other control devices to achieve desired functionality. Conduct thorough testing, debugging, and validation of control systems to ensure reliability, performance, and safety. Stay abreast of industry trends, emerging technologies, and best practices in control system programming, incorporating innovative solutions into project designs. Provide technical expertise and support throughout all phases of the project lifecycle, from initial concept to commissioning and ongoing maintenance. Collaborate with cross-functional teams to identify opportunities for continuous improvement and optimization of control systems.

Job Description Job Description Description: The Slate River Systems' Senior Controls Systems Engineer will design and implement MHE controls systems. These systems vary in complexity and scope and may include, but are not limited to: Pallet Conveyor, Case Conveyor, Sortation, ASRS and AGVs control, and may interface with Warehouse Control Systems (WCS), Robot Control Systems (RCS), Traffic Management Programs, Supervisory Control and Data Acquisition systems (SCADA). DUTIES AND RESPONSIBILITIES: Develop standard controls hardware offerings as listed below but not limited to Standard Electrical Drawing Sets; Control Cabinets; Field Enclosures; Scanners, Scales, Profilers; Vision systems; Industrial Ethernet and Machine Communications; and Power Distribution. Assist Project Engineering with Pre-Sales Support; Lead Hardware and Software Tech reviews; Hardware Design, PLC Software, SCADA Design and Emulation; Field Commissioning; and Final Acceptance. Acts as a subject matter expert in hardware design/Mechanical Design as it relates to Controls systems. Slate River is a growing and developing organization and flexibility amongst staff is important. Your supervisor may therefore ask you to perform tasks which are not listed under Duties and Responsibilities. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: QUALIFICATIONS - EDUCATION AND/OR TRAINING: Bachelor's degree in electrical, or related field with industry experience in controls engineering. EXPERIENCE: 5+ Years of controls engineering experience directly related to material handling (Case/Poly Conveyor, Sortation Systems, Pallet Conveyor, AGVs, ASRS) Must have experience with communication to WCS systems Experience with Emulation packages such as Emulate3D Experience with Industrial Ethernet Applications Experience with Power distribution, FLA Calculations, and Efficiency Calculations Experience working with cross disciplinary project teams Experience with Designing Control Systems and hardware following NFPA and UL Experience with Safety Standard such as ISO13849 GENERAL SKILLS: Ability to travel at least 50% of the time. Proficient in AutoDesk applications, mainly AutoCAD. Demonstrable strong expertise with PLC programing in Rockwell Studio 5000 and the ability to work with other PLC platforms such as CodeSys and Siemens.

Job Description Job Description Job Title: Controls and Automation Engineer Location: Burlingame, CA - With hard commit to relocate to Sacramento Facility Department: Manufacturing Engineering Position Type: Full Time Compensation: About the Company Peak Energy is the first American venture to advance globally proven Sodium-Ion battery systems as the storage standard for the new era of renewable energy on a resilient grid. Sodium-Ion is cheap, readily available and safe, making it the leading contender in a rapidly evolving market. Our leadership team is powered by decades of expertise in scaling gigawatt-level innovation at world-class companies such as Tesla, Northvolt, SunPower, Fluence, and Enovix. We are backed by strategic investment and product partners such as TDK Ventures and Eclipse Ventures. We are a team of engineers, technicians, entrepreneurs, and partners driven by a shared ambition to set the new performance standard for renewable energy and grid resilience. About the Job Peak Energy is looking for a Controls and Automation Engineer to join our Manufacturing Engineering team supporting Battery Energy Storage System (BESS) manufacturing automation. This is an entry-level to junior-level, individual-contributor role focused on supporting the implementation, and maintenance of control systems and automation solutions that ensure the efficiency, safety, and quality of our battery products. You will work closely with senior Controls Engineers, Equipment Engineers, and Process Engineers to build hands-on experience with PLCs, SCADA, and HMI systems, developing into a more independent contributor as you grow with the team and Peak Energy scales production. Responsibilities: Support the programming and commissioning of PLC, SCADA, and HMI systems for BESS manufacturing equipment, under the guidance of senior Controls Engineers. Partner with Equipment Engineers to help integrate automation solutions into new and existing manufacturing equipment. Help analyze production processes and identify opportunities for automation and control improvements. Support the implementation and upkeep of data acquisition systems, helping collect and organize production data for Process and Automation Engineers to analyze. Assist in maintaining safety systems, such as emergency shutdown procedures and safety interlocks. Troubleshoot control system issues on the manufacturing floor and perform routine maintenance to keep automation systems running reliably. Collaborate with Process Engineers, Equipment Engineers, and Maintenance to ensure control systems support production needs. Help maintain documentation of control system designs, revisions, and updates, and contribute to operator and maintenance training materials. Support efforts to keep control systems compliant with applicable industry, safety, and regulatory standards. Qualifications: Bachelor's degree in Engineering (Electrical, Controls/Automation, or a related field), or equivalent practical experience. 0-2 years of experience in controls, automation, or a related engineering field; relevant internships, co-ops, or capstone projects are valued. Foundational knowledge of PLC programming, SCADA systems, and HMI design principles. Exposure to industrial automation platforms (e.g., Beckhoff TwinCAT, Allen-Bradley, or Siemens) through coursework or hands-on projects is a plus. Familiarity with data acquisition or historian platforms, such as Ignition by Inductive Automation, is a plus. Strong problem-solving and analytical skills, with a willingness to learn and take direction from senior engineers. Clear communicator who works well in cross-functional teams. Eagerness to adapt to new technologies and grow technical skills in a fast-paced manufacturing environment. Basic understanding of environmental and safety regulations relevant to controls and automation in manufacturing. Peak Energy Core Values Speed Through Focus: Prioritize what matters most and execute quickly without distractions. Mission Over Self: Put the company's mission and team success ahead of individual interests. Face the Brutal Truth: Embrace honesty, even when it's uncomfortable, to make informed decisions. Be a Good Person: Treat everyone with respect and integrity, fostering a positive and ethical work environment. The salary range for this role is $120,000 - $180,000 , with actual pay varying based on work location, experience, and skills. At Peak Energy, we value our employees and promote work-life balance. Our competitive benefits package includes unlimited PTO, comprehensive medical, dental, and vision coverage, a strong 401(k) plan, and equity opportunities. Join us to thrive in a supportive environment while making a meaningful impact in the energy sector! At Peak Energy Technologies Inc., we believe that a diverse and inclusive workplace makes us a more capable, innovative, and competitive company. We welcome people who represent diversity in their backgrounds, ethnicities, cultures, and experiences. Peak Energy Technologies Inc. is an equal opportunity employer, aiming to reach our company's full potential by cultivating an inclusive workforce. We do not discriminate on the basis of race, color, ancestry, religion, national origin, sexual orientation, citizenship, marital or family status, disability, gender identity or expression, veteran status, or any other legally protected status.

Job Description Job Description Job Title: Controls Automation Engineer Location: Lenexa, KS Employment Type: W2 Contract Full-Time 12-Month Assignment Pay Rate:$40.00 - $42.00/hour Paid Weekly Work Model: Fully Onsite Shift: 1st Shift Role Overview Turn automation challenges into smarter, safer, and more efficient manufacturing. BEPC is seeking an experienced Controls Automation Engineer to support our client's manufacturing operations in Lenexa, Kansas. This is a hands-on engineering opportunity for someone who enjoys PLC programming, troubleshooting complex control systems, improving equipment performance, and taking automation projects from concept through implementation. You'll work extensively with Rockwell Automation / Allen-Bradley PLCs, HMI/SCADA systems, industrial networks, instrumentation, VFDs, and electrical controls. Your work will directly support production reliability, process efficiency, product quality, and manufacturing safety. If you have 3-5 years of industrial automation experience and strong hands-on expertise with ControlLogix, CompactLogix, and Studio 5000, this role offers the opportunity to make an immediate impact while expanding your experience across sophisticated manufacturing automation systems. Why You'll Want to Apply $40.00 - $42.00/hour, paid weekly 12-month full-time contract Hands-on work with Rockwell / Allen-Bradley automation technology Own automation projects from design and programming through commissioning and startup Solve real-world controls challenges that directly impact manufacturing performance Work across PLCs, HMI/SCADA, industrial networks, instrumentation, VFDs, and robotics Collaborate with engineering, maintenance, production, and operations teams Competitive BEPC benefits, including medical, dental, vision, and life insurance Join BEPC, a 100% employee-owned company Key Responsibilities Develop, modify, maintain, and troubleshoot Rockwell Automation / Allen-Bradley PLC programs. Work with ControlLogix, CompactLogix, MicroLogix, Studio 5000, and RSLogix 5000 platforms. Configure, maintain, and troubleshoot HMI/SCADA applications using FactoryTalk View SE/ME, Ignition, or similar platforms. Support automation projects throughout the complete lifecycle, including design, programming, installation, commissioning, startup, and operational handoff. Diagnose and resolve PLC, instrumentation, electrical, and control system issues to minimize manufacturing downtime. Troubleshoot industrial communication networks and connected automation equipment. Support instrumentation, sensors, VFDs, servo systems, and motor control centers. Develop and maintain technical documentation, including electrical schematics, P&IDs, control narratives, and programming standards. Collaborate with process engineers and operations teams to improve manufacturing efficiency, product quality, and process safety. Conduct control system audits and identify opportunities for preventive maintenance and continuous improvement. Provide onsite and, when required, on-call technical support for critical manufacturing systems. Train maintenance technicians and equipment operators on automation systems and troubleshooting best practices. Support integration between automation systems and manufacturing technology platforms where applicable. Ensure controls and automation activities comply with applicable engineering standards, OSHA requirements, NFPA requirements, and internal safety policies. Qualifications Required Qualifications Bachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, or a related engineering discipline. 3-5 years of industrial controls or automation engineering experience within a manufacturing environment. Strong hands-on experience with Rockwell Automation / Allen-Bradley PLC systems. Experience with: ControlLogix CompactLogix Studio 5000 / RSLogix 5000 Experience programming, troubleshooting, and modifying PLC-controlled manufacturing equipment. Experience with HMI/SCADA systems such as FactoryTalk View, Wonderware, Ignition, or similar platforms. Knowledge of industrial communication protocols such as EtherNet/IP, DeviceNet, Profibus, and Modbus. Experience working with instrumentation, sensors, VFDs, servo systems, and motor control centers (MCCs). Ability to read and interpret electrical schematics, wiring diagrams, P&IDs, and mechanical drawings. Strong electrical and controls troubleshooting skills. Strong analytical and problem-solving abilities. Ability to work independently while collaborating effectively with engineering, maintenance, production, and operations teams. Excellent written and verbal communication skills. Preferred Qualifications Rockwell Automation Certified Logix Designer (CLD) certification. Experience with ISA-88 batch control systems. Knowledge of Manufacturing Execution Systems (MES) and ERP integrations. SAP integration experience. Robot programming experience with FANUC, ABB, KUKA, or similar platforms. Lean Manufacturing and/or Six Sigma experience. Experience in food & beverage, chemical, packaging, life sciences, or other process manufacturing environments. Familiarity with industrial control system (ICS) cybersecurity best practices. What Success Looks Like You'll be successful in this role if you can walk into a manufacturing controls problem, diagnose what's happening, determine the root cause, and implement a reliable solution. Whether you're troubleshooting a PLC issue, improving an HMI, commissioning new equipment, resolving a network communication problem, or optimizing an existing process, you'll be expected to combine strong technical knowledge with practical, hands-on problem solving. This opportunity is particularly well suited for an engineer who wants to do more than monitor systems-you'll have the opportunity to program, troubleshoot, improve, and implement automation solutions that directly affect manufacturing performance. About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Apply Now! Ready to put your Rockwell Automation expertise to work on real-world manufacturing challenges? We'd like to hear from controls and automation professionals with hands-on experience in PLC programming, industrial controls, HMI/SCADA systems, electrical troubleshooting, instrumentation, and manufacturing automation. Please submit an up-to-date resume with specific examples demonstrating how you meet the qualifications. Be sure to highlight projects involving Allen-Bradley/Rockwell PLCs, ControlLogix, CompactLogix, Studio 5000, FactoryTalk, HMI/SCADA, industrial networking, VFDs, instrumentation, equipment commissioning, and controls troubleshooting. Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth.

Job Description Job Description Job Title: Controls Automation Engineer Location: Lenexa, KS Employment Type: W2 Contract Full-Time 12-Month Assignment Pay Rate:$40.00 - $42.00/hour Paid Weekly Work Model: Fully Onsite Shift: 1st Shift Role Overview Turn automation challenges into smarter, safer, and more efficient manufacturing. BEPC is seeking an experienced Controls Automation Engineer to support our client's manufacturing operations in Lenexa, Kansas. This is a hands-on engineering opportunity for someone who enjoys PLC programming, troubleshooting complex control systems, improving equipment performance, and taking automation projects from concept through implementation. You'll work extensively with Rockwell Automation / Allen-Bradley PLCs, HMI/SCADA systems, industrial networks, instrumentation, VFDs, and electrical controls. Your work will directly support production reliability, process efficiency, product quality, and manufacturing safety. If you have 3-5 years of industrial automation experience and strong hands-on expertise with ControlLogix, CompactLogix, and Studio 5000, this role offers the opportunity to make an immediate impact while expanding your experience across sophisticated manufacturing automation systems. Why You'll Want to Apply $40.00 - $42.00/hour, paid weekly 12-month full-time contract Hands-on work with Rockwell / Allen-Bradley automation technology Own automation projects from design and programming through commissioning and startup Solve real-world controls challenges that directly impact manufacturing performance Work across PLCs, HMI/SCADA, industrial networks, instrumentation, VFDs, and robotics Collaborate with engineering, maintenance, production, and operations teams Competitive BEPC benefits, including medical, dental, vision, and life insurance Join BEPC, a 100% employee-owned company Key Responsibilities Develop, modify, maintain, and troubleshoot Rockwell Automation / Allen-Bradley PLC programs. Work with ControlLogix, CompactLogix, MicroLogix, Studio 5000, and RSLogix 5000 platforms. Configure, maintain, and troubleshoot HMI/SCADA applications using FactoryTalk View SE/ME, Ignition, or similar platforms. Support automation projects throughout the complete lifecycle, including design, programming, installation, commissioning, startup, and operational handoff. Diagnose and resolve PLC, instrumentation, electrical, and control system issues to minimize manufacturing downtime. Troubleshoot industrial communication networks and connected automation equipment. Support instrumentation, sensors, VFDs, servo systems, and motor control centers. Develop and maintain technical documentation, including electrical schematics, P&IDs, control narratives, and programming standards. Collaborate with process engineers and operations teams to improve manufacturing efficiency, product quality, and process safety. Conduct control system audits and identify opportunities for preventive maintenance and continuous improvement. Provide onsite and, when required, on-call technical support for critical manufacturing systems. Train maintenance technicians and equipment operators on automation systems and troubleshooting best practices. Support integration between automation systems and manufacturing technology platforms where applicable. Ensure controls and automation activities comply with applicable engineering standards, OSHA requirements, NFPA requirements, and internal safety policies. Qualifications Required Qualifications Bachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, or a related engineering discipline. 3-5 years of industrial controls or automation engineering experience within a manufacturing environment. Strong hands-on experience with Rockwell Automation / Allen-Bradley PLC systems. Experience with: ControlLogix CompactLogix Studio 5000 / RSLogix 5000 Experience programming, troubleshooting, and modifying PLC-controlled manufacturing equipment. Experience with HMI/SCADA systems such as FactoryTalk View, Wonderware, Ignition, or similar platforms. Knowledge of industrial communication protocols such as EtherNet/IP, DeviceNet, Profibus, and Modbus. Experience working with instrumentation, sensors, VFDs, servo systems, and motor control centers (MCCs). Ability to read and interpret electrical schematics, wiring diagrams, P&IDs, and mechanical drawings. Strong electrical and controls troubleshooting skills. Strong analytical and problem-solving abilities. Ability to work independently while collaborating effectively with engineering, maintenance, production, and operations teams. Excellent written and verbal communication skills. Preferred Qualifications Rockwell Automation Certified Logix Designer (CLD) certification. Experience with ISA-88 batch control systems. Knowledge of Manufacturing Execution Systems (MES) and ERP integrations. SAP integration experience. Robot programming experience with FANUC, ABB, KUKA, or similar platforms. Lean Manufacturing and/or Six Sigma experience. Experience in food & beverage, chemical, packaging, life sciences, or other process manufacturing environments. Familiarity with industrial control system (ICS) cybersecurity best practices. What Success Looks Like You'll be successful in this role if you can walk into a manufacturing controls problem, diagnose what's happening, determine the root cause, and implement a reliable solution. Whether you're troubleshooting a PLC issue, improving an HMI, commissioning new equipment, resolving a network communication problem, or optimizing an existing process, you'll be expected to combine strong technical knowledge with practical, hands-on problem solving. This opportunity is particularly well suited for an engineer who wants to do more than monitor systems-you'll have the opportunity to program, troubleshoot, improve, and implement automation solutions that directly affect manufacturing performance. About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Apply Now! Ready to put your Rockwell Automation expertise to work on real-world manufacturing challenges? We'd like to hear from controls and automation professionals with hands-on experience in PLC programming, industrial controls, HMI/SCADA systems, electrical troubleshooting, instrumentation, and manufacturing automation. Please submit an up-to-date resume with specific examples demonstrating how you meet the qualifications. Be sure to highlight projects involving Allen-Bradley/Rockwell PLCs, ControlLogix, CompactLogix, Studio 5000, FactoryTalk, HMI/SCADA, industrial networking, VFDs, instrumentation, equipment commissioning, and controls troubleshooting. Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth.

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. is seeking an Automation Engineer to design, implement, and optimize building automation solutions across our commercial real estate portfolio. In this role, you will configure and integrate BAS/BMS, PLCs, and IoT devices to improve energy efficiency, comfort, and asset performance. You will collaborate with facility managers, project teams, and vendors to scope automation projects, troubleshoot system issues, and standardize controls architectures. You will analyze performance data, develop dashboards, and recommend automation strategies that support sustainability, reliability, and client-focused outcomes. Responsibilities Design and configure building automation and control systems across commercial properties Integrate BAS/BMS, PLCs, Io T sensors, and related platforms to enhance building performance Analyze building and energy data to identify optimization opportunities and implement control strategies Collaborate with facility managers, project managers, and vendors on automation project scoping and delivery Troubleshoot automation system issues and perform root-cause analysis and corrective actions Develop and maintain standard controls architectures, sequences of operations, and documentation Create dashboards and reports to communicate building performance to clients and internal stakeholders Support commissioning, testing, and validation of automation solutions for new and existing assets Required Skills Building Automation Systems (BAS) Programmable Logic Controllers (PLC) Industrial control systems (ICS) Io T device integration HVAC controls and optimization Energy management and monitoring SCADA or BMS platforms (e.g., Niagara, Tridium) Scripting or programming (e.g., Python, Java Script) SQL and data analytics tools Network protocols (BACnet, Modbus, Lon Works)

Jones Lang LaSalle Americas, Inc. (JLL) is seeking a Senior Automation Engineer to lead automation solutions that elevate performance across our global commercial real estate portfolio. In this role, you will design and implement building and operational automation for leasing, property, and facility management, integrating BMS, IoT, and data platforms to drive efficiency and sustainability. You will develop scripts, APIs, and test frameworks that streamline workflows and enhance reliability of technology-enabled services. Partnering closely with property, project, and technology teams, you will translate business requirements into robust, secure, and scalable automation architectures. In JLL's performance-driven and collaborative culture, you will mentor engineers, champion innovation, and contribute to a more sustainable built environment while gaining exposure to high-profile clients and complex assets worldwide. Responsibilities Design, develop, and maintain automation solutions for building systems and real estate operations across JLL-managed portfolios Integrate sensors, BMS, and Io T platforms to optimize energy use, occupancy, and asset performance Develop and maintain automated test frameworks for real estate technology platforms and applications Analyze system data to identify efficiency, reliability, and sustainability improvement opportunities Collaborate with property, facility, and project teams to define automation requirements and standards Implement scripts, APIs, and workflows to streamline leasing, facilities, and capital project processes Ensure automation solutions meet security, compliance, and reliability standards Lead troubleshooting, root-cause analysis, and continuous improvement of automation systems Document architectures, configurations, test plans, and operational procedures Mentor junior engineers and contribute to automation best practices and tooling Required Skills Automation engineering Building Management Systems (BMS) / SCADAPLC and controls programming Scripting (Python, Power Shell, or similar) API integration and workflow automation Io T and sensor integration Data analysis and visualization (e.g., SQL, BI tools) Cloud and edge platforms for building automation Test automation frameworks Technical documentation and requirements gathering