Adex Corporation

Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Data Center Installer Contract Position Pay Rate: $30-$37/hr W-2 Shift hours: 11:00 PM - 7:00 AM. PPE : Candidates must provide their own over-the-ankle, ESD-rated composite toe safety boots. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1 and 2 - up to and including the following work operations: LEVEL 1 Assemble, erect, mount and align Common Central Office or Data Center hardware. Run and secure cable and perform basic wiring functions. This shall include, copper, fiber optic and coaxial cabling. Prepare cabling for termination to various pieces of telephony hardware. Prepare and connect coaxial and fiber optic type cabling. During removal operations perform cable verification and cable mining operations. Mount and label a wide variety of telecommunication units, terminal blocks, and interconnect panels. LEVEL 2 Perform basic power operations such as mounting relay rack or cabinet fuse panels and perform the termination of power feeders. This also includes the running and termination of local power leads from fuse panels to various units within a relay rack or cabinet. Interpret job specifications, floor plans, equipment and wiring drawings. Perform complex wiring operations. Perform basic installation testing, such as power verification, continuity, Cat5/6 testing and fiber optic loss testing. Prepare, connect and test coaxial and fiber optic cabling. Interpret, lay out and analyze job Method of Procedures, job specifications, floor plans, equipment and wiring documentation. Interface with Job Supervisor/Project Manager and Engineering to resolve any order issues. Correct on site job specifications, drawings, documentation. In-Charge, lead and provide work assignments for Level 1 and 2 installers. Perform installation testing, such as power verification, hardware provisioning and system tests. During removal operations perform cable verification and cable mining operations. Meet Network Equipment Installation/Quality Standards as prescribed by CBMA and Customer requirements. Credentials and Experience: Requires minimum of 7-10 years of Central Office/Data Center/MTSO or equivalent installation experience. Knowledge, Skills and Abilities: Level 3 installer should have minimum 4-6 years' experience as a Level 2 installer. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Solid grasp of basic electrical theory. Proficiency in Word, Excel, PowerPoint, and the Internet; must be adept at learning different computer programs and business systems. Must have clean driving and criminal records and successfully pass a drug test. Test equipment, tools and materials used in construction, installation, troubleshooting, maintenance and repair of telecommunications systems and equipment.

Job Description Job Description Level 2 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. AT&T d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 2 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. AT&T d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Gulf Coast States Working NIGHTS Telecom Experience Required. Level 3 Installer Essential Job Functions: • Basic knowledge of AC/DC power and installation. • Understand and use established safety requirements/procedures for equipment, ESD, power, & radiation. • Install frames, cabinets, and misc. equipment • Install cables, power, inter-cabinet, alarm punch-down. • Able to follow established procedures and resolve any site issues i.e.: material and engineering discrepancies. • Measure and mark floors, position and assemble iron work and cable rack. • Drill floors, install raised floors, install anchors, level, align and secure equipment including earthquake requirement. • Able to run Cabling, Fiber, Coax, and properly secure to appropriate locations. • Solid work ethic, capable of self-directed work. • Adhere to all Telecom Standards and Practices. Education/Certifications: • CPR First Aid • ESD protection course • Safe Lifting Practices course Experience/Minimum Requirements: • High School Diploma • Valid Driver's License Other Skills/Abilities: • Able to work without constant supervision. • Able to lift 50 pounds • Able to climb a ladder and work in high places • Maintain good housekeeping practices • Able to competently use basic hand tools • Able to read simple mechanical, electrical, MOPs, JIMs, and instructional documentation • Possess good interpersonal skills and ability to work in a team environment • Aware of procedures for working around and on "in service equipment " • Know standard Telecom color code • Basic knowledge of AC/DC power and installation • Customer service orientation with a strong problem-solving approach - strong interpersonal skills

Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. AT&T Experience needed 1. Must have Telecommunication Central Office expierance and be able to work independently Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Data Center Installer Contract Position Pay Rate: $30-$37/hr W-2 Shift hours: 11:00 PM - 7:00 AM. PPE : Candidates must provide their own over-the-ankle, ESD-rated composite toe safety boots. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1 and 2 - up to and including the following work operations: LEVEL 1 Assemble, erect, mount and align Common Central Office or Data Center hardware. Run and secure cable and perform basic wiring functions. This shall include, copper, fiber optic and coaxial cabling. Prepare cabling for termination to various pieces of telephony hardware. Prepare and connect coaxial and fiber optic type cabling. During removal operations perform cable verification and cable mining operations. Mount and label a wide variety of telecommunication units, terminal blocks, and interconnect panels. LEVEL 2 Perform basic power operations such as mounting relay rack or cabinet fuse panels and perform the termination of power feeders. This also includes the running and termination of local power leads from fuse panels to various units within a relay rack or cabinet. Interpret job specifications, floor plans, equipment and wiring drawings. Perform complex wiring operations. Perform basic installation testing, such as power verification, continuity, Cat5/6 testing and fiber optic loss testing. Prepare, connect and test coaxial and fiber optic cabling. Interpret, lay out and analyze job Method of Procedures, job specifications, floor plans, equipment and wiring documentation. Interface with Job Supervisor/Project Manager and Engineering to resolve any order issues. Correct on site job specifications, drawings, documentation. In-Charge, lead and provide work assignments for Level 1 and 2 installers. Perform installation testing, such as power verification, hardware provisioning and system tests. During removal operations perform cable verification and cable mining operations. Meet Network Equipment Installation/Quality Standards as prescribed by CBMA and Customer requirements. Credentials and Experience: Requires minimum of 7-10 years of Central Office/Data Center/MTSO or equivalent installation experience. Knowledge, Skills and Abilities: Level 3 installer should have minimum 4-6 years' experience as a Level 2 installer. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Solid grasp of basic electrical theory. Proficiency in Word, Excel, PowerPoint, and the Internet; must be adept at learning different computer programs and business systems. Must have clean driving and criminal records and successfully pass a drug test. Test equipment, tools and materials used in construction, installation, troubleshooting, maintenance and repair of telecommunications systems and equipment.

Job Description Job Description Gulf Coast States Working NIGHTS Telecom Experience Required. Level 3 Installer Essential Job Functions: • Basic knowledge of AC/DC power and installation. • Understand and use established safety requirements/procedures for equipment, ESD, power, & radiation. • Install frames, cabinets, and misc. equipment • Install cables, power, inter-cabinet, alarm punch-down. • Able to follow established procedures and resolve any site issues i.e.: material and engineering discrepancies. • Measure and mark floors, position and assemble iron work and cable rack. • Drill floors, install raised floors, install anchors, level, align and secure equipment including earthquake requirement. • Able to run Cabling, Fiber, Coax, and properly secure to appropriate locations. • Solid work ethic, capable of self-directed work. • Adhere to all Telecom Standards and Practices. Education/Certifications: • CPR First Aid • ESD protection course • Safe Lifting Practices course Experience/Minimum Requirements: • High School Diploma • Valid Driver's License Other Skills/Abilities: • Able to work without constant supervision. • Able to lift 50 pounds • Able to climb a ladder and work in high places • Maintain good housekeeping practices • Able to competently use basic hand tools • Able to read simple mechanical, electrical, MOPs, JIMs, and instructional documentation • Possess good interpersonal skills and ability to work in a team environment • Aware of procedures for working around and on "in service equipment " • Know standard Telecom color code • Basic knowledge of AC/DC power and installation • Customer service orientation with a strong problem-solving approach - strong interpersonal skills

Job Description Job Description Level 3 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. AT&T Experience needed 1. Must have Telecommunication Central Office expierance and be able to work independently Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 3 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. AT&T Experience needed 1. Must have Telecommunication Central Office expierance and be able to work independently Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.

Job Description Job Description Level 2 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. AT&T d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.