Job Description Job Description Level 4 Installer Pay Rate: $31-$32.50/hr NYC Metro NIGHTS The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
11/11/2026
Full time
Job Description Job Description Level 4 Installer Pay Rate: $31-$32.50/hr NYC Metro NIGHTS The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/11/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.