Job Description Job Description Description: Who We Are Our purpose at CloudHQ is to provide flexible, efficient and resilient data center solutions to businesses of all sizes. Our growing organization was founded by the pioneer of data center REITs. CloudHQ has state-of-the-art data center sites located on two Northern Virginia campuses, as well as London, Frankfurt, Paris, and São Paulo, and we anticipate exponential growth over the next several years both in the US and abroad. What The Role Entails Based in Ashburn, Virginia, the Telecom Infrastructure Technician / Inspector at CloudHQ performs and verifies fiber-optic installation, repair, testing, labeling, and construction activities. The role provides field-level quality assurance, documents actual conditions, identifies nonconforming work, and supports safe, reliable turnover of telecom infrastructure. What You Will Get to Do Install, route, dress, secure, label, terminate, splice, and repair fiber-optic cables and associated pathway or support components within the role's authorization and training. Inspect underground, aerial, building, and data center telecom construction against approved drawings, scopes, specifications, permits, and quality requirements. Observe conduit, duct, handhole, manhole, pathway, cable placement, bend radius, pulling tension, grounding or bonding interfaces, firestopping, labeling, and restoration activities as applicable. Perform or witness continuity, polarity, optical loss, power-meter, and reflectometry testing in accordance with approved test plans and equipment procedures. Document daily progress, installed quantities, test results, site conditions, photos, redlines, deficiencies, and corrective actions. Identify damaged facilities, unsafe conditions, design conflicts, quality issues, and scope deviations; stop or escalate work when required by site rules or authority level. Coordinate field activities with project managers, engineers, contractors, site operations, security, safety, and utility representatives. Validate punch-list completion and contribute to as-built drawings, splice records, cable schedules, and closeout packages. Maintain tools and test equipment, track calibration status where applicable, and follow material-handling and housekeeping expectations. Use required personal protective equipment and comply with site safety, access, security, environmental, and work-control procedures. Success Measures Work is completed safely, correctly, and in accordance with approved documents and instructions. Inspection findings are timely, objective, traceable, and supported by clear records. Deficiencies are identified early and tracked through verified correction. Test records, redlines, photos, and closeout documentation are complete and accurate. Requirements: What you Bring to the Role 3+ years of technical infrastructure management experience High school diploma or equivalent; technical school, apprenticeship, military, or industry training is beneficial. Hands-on experience with fiber-optic installation, repair, testing, construction inspection, or related telecom field work. Ability to read route plans, construction drawings, cable schedules, splice diagrams, labels, and work packages. Familiarity with fiber handling, cleaning, connector inspection, cable placement, pathway systems, and common field test equipment. Ability to create accurate field notes, photo records, redlines, deficiency reports, and test documentation. Valid driver's licenses where required for assigned travel and site access. Our Ideal Candidate Will Also Possess FOA CFOT/CFOS, BICSI Installer or Technician, OSHA construction training, or comparable credentials. Experience in outside-plant construction, utility coordination, data centers, or mission-critical facilities. Experience with fusion splicing, optical time-domain reflectometry, optical loss testing, and digital inspection or punch-list tools. Knowledge of GIS, mobile field-data collection, or fiber asset-management systems. What We Offer CloudHQ's people and culture are the most enriching aspects that make us a great place to work. We are strengthened by industry experts who bring extensive knowledge, skill, and experience; leaders who bring vision, innovation and commitment to our people; and an expanding team of individuals who believe in that vision and bring their best to support their customers and team. Our U.S. employees enjoy competitive compensation and rewarding incentives, comprehensive benefits (medical, dental, vision, life insurance, disability), 401(k) with match, 12 paid holidays, generous PTO, development opportunities, and the ability to closely impact and contribute to the growth of an exceptional organization. Equal Employment Opportunity CloudHQ is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, age, national origin, disability, sexual orientation, gender identity or expression, marital status, genetic information, protected veteran status, or other legally protected status.
11/17/2026
Full time
Job Description Job Description Description: Who We Are Our purpose at CloudHQ is to provide flexible, efficient and resilient data center solutions to businesses of all sizes. Our growing organization was founded by the pioneer of data center REITs. CloudHQ has state-of-the-art data center sites located on two Northern Virginia campuses, as well as London, Frankfurt, Paris, and São Paulo, and we anticipate exponential growth over the next several years both in the US and abroad. What The Role Entails Based in Ashburn, Virginia, the Telecom Infrastructure Technician / Inspector at CloudHQ performs and verifies fiber-optic installation, repair, testing, labeling, and construction activities. The role provides field-level quality assurance, documents actual conditions, identifies nonconforming work, and supports safe, reliable turnover of telecom infrastructure. What You Will Get to Do Install, route, dress, secure, label, terminate, splice, and repair fiber-optic cables and associated pathway or support components within the role's authorization and training. Inspect underground, aerial, building, and data center telecom construction against approved drawings, scopes, specifications, permits, and quality requirements. Observe conduit, duct, handhole, manhole, pathway, cable placement, bend radius, pulling tension, grounding or bonding interfaces, firestopping, labeling, and restoration activities as applicable. Perform or witness continuity, polarity, optical loss, power-meter, and reflectometry testing in accordance with approved test plans and equipment procedures. Document daily progress, installed quantities, test results, site conditions, photos, redlines, deficiencies, and corrective actions. Identify damaged facilities, unsafe conditions, design conflicts, quality issues, and scope deviations; stop or escalate work when required by site rules or authority level. Coordinate field activities with project managers, engineers, contractors, site operations, security, safety, and utility representatives. Validate punch-list completion and contribute to as-built drawings, splice records, cable schedules, and closeout packages. Maintain tools and test equipment, track calibration status where applicable, and follow material-handling and housekeeping expectations. Use required personal protective equipment and comply with site safety, access, security, environmental, and work-control procedures. Success Measures Work is completed safely, correctly, and in accordance with approved documents and instructions. Inspection findings are timely, objective, traceable, and supported by clear records. Deficiencies are identified early and tracked through verified correction. Test records, redlines, photos, and closeout documentation are complete and accurate. Requirements: What you Bring to the Role 3+ years of technical infrastructure management experience High school diploma or equivalent; technical school, apprenticeship, military, or industry training is beneficial. Hands-on experience with fiber-optic installation, repair, testing, construction inspection, or related telecom field work. Ability to read route plans, construction drawings, cable schedules, splice diagrams, labels, and work packages. Familiarity with fiber handling, cleaning, connector inspection, cable placement, pathway systems, and common field test equipment. Ability to create accurate field notes, photo records, redlines, deficiency reports, and test documentation. Valid driver's licenses where required for assigned travel and site access. Our Ideal Candidate Will Also Possess FOA CFOT/CFOS, BICSI Installer or Technician, OSHA construction training, or comparable credentials. Experience in outside-plant construction, utility coordination, data centers, or mission-critical facilities. Experience with fusion splicing, optical time-domain reflectometry, optical loss testing, and digital inspection or punch-list tools. Knowledge of GIS, mobile field-data collection, or fiber asset-management systems. What We Offer CloudHQ's people and culture are the most enriching aspects that make us a great place to work. We are strengthened by industry experts who bring extensive knowledge, skill, and experience; leaders who bring vision, innovation and commitment to our people; and an expanding team of individuals who believe in that vision and bring their best to support their customers and team. Our U.S. employees enjoy competitive compensation and rewarding incentives, comprehensive benefits (medical, dental, vision, life insurance, disability), 401(k) with match, 12 paid holidays, generous PTO, development opportunities, and the ability to closely impact and contribute to the growth of an exceptional organization. Equal Employment Opportunity CloudHQ is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, age, national origin, disability, sexual orientation, gender identity or expression, marital status, genetic information, protected veteran status, or other legally protected status.
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in De Pere, WI . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $30 - $38 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fujikura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
11/17/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in De Pere, WI . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $30 - $38 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fujikura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in San Antonio, TX . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $22 - $35 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fijukura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
11/17/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in San Antonio, TX . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $22 - $35 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fijukura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in La Crosse, WI . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $30 - $38 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fujikura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
11/17/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Fiber Splicer to join our team in La Crosse, WI . In this role you will complete installation, repair and testing of fiber and the different components, splice loose tube and ribbon fiber in compliance with modern standards and connect and configure fiber optic networks for facilities while troubleshooting problems. Why TAK? Full Time Paid Weekly Compensation: $30 - $38 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Complete installation, repairs and testing of fiber and the different components Splice loose tube and ribbon fiber in compliance with modern standards Connect and configure fiber optic networks for facilities while troubleshooting problems Read splicing print and apply color code to print reading Test, activate, and troubleshoot equipment after installation Basic daily maintenance of TAK provided vehicle: check fluids, clean and organize vehicle Ongoing monitoring to ensure that splicing operations are completed according to customer and industry specifications Safely operate and use a bucket truck to complete daily construction assignments, and pull the fiber trailer as needed Complete daily production reports, mark-up maps, keep track of work hours, complete "as-built maps" for areas built and tracks daily production Reconcile all issued parts and materials daily to ensure accurate material usage counts Frequently works with minimal or no supervision Perform general clean up Other duties as assigned Requirements: Prior fiber splicing experience required Prior experience with CWDM and DWDM, prepping & splicing from 6ct to 288ct, and a working knowledge of OTDR (VEeX and/or EXFO) and the Fujikura Fiber Splicer a plus Ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons Ability to safely operate a vehicle while pulling a trailer Ability to complete tasks with small components and wires Ability to judge distance and space relationships Ability to interpret splicing print and distinguish/apply color code to print reading Ability to use specialty tools Ability to use and understand splicing technology such as OTDRs, VFL, OLTS and Fusion Splice Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Class A CDL preferred Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Telecom Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
11/17/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Telecom Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
Job Description Job Description Data Center Technician - $22-$30/hr - DOE We are currently hiring Data Center Technicians with fiber experience performing low voltage installation in a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Jeffersonville, Ohio. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Please apply today by calling/texting YOUR NAME to or emailing your resume to or apply directly to this posting by clicking "Apply" below. Data Center Technician Duties : Pulling and routing Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications : Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation : Competitive starting pay $22 -$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
11/13/2026
Full time
Job Description Job Description Data Center Technician - $22-$30/hr - DOE We are currently hiring Data Center Technicians with fiber experience performing low voltage installation in a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Jeffersonville, Ohio. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Please apply today by calling/texting YOUR NAME to or emailing your resume to or apply directly to this posting by clicking "Apply" below. Data Center Technician Duties : Pulling and routing Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications : Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation : Competitive starting pay $22 -$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
Job Description Job Description Data Center Technician Data Center Technician - $15-$30/hr - DOE We are currently hiring Data Center Technicians with 2+ years of experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Los Angeles Area. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Data Center Technician Duties: Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications: Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: Competitive starting pay $20 -$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
11/13/2026
Full time
Job Description Job Description Data Center Technician Data Center Technician - $15-$30/hr - DOE We are currently hiring Data Center Technicians with 2+ years of experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Los Angeles Area. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Data Center Technician Duties: Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications: Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: Competitive starting pay $20 -$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
Job Description Job Description Data Center Technician ES7 or EE98 Certified We are currently hiring Data Center Technicians with experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need for skilled technicians. This Job will be in Santa Teresa, NM Data Center Technician Duties: • Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment • Pulling Fiber • Dressing, labeling and terminating low voltage wires • Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) • Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) • Rack and stack work, closet work, putting together server racks, patch panels Qualifications: • Familiarity with BICSI, EIA, TIA, or NEC Standards • Experience running or bending conduit, with digital multi-meters, and testing cable is a plus • Experience troubleshooting networking issues is a plus • Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus • Ability to read and understand schematic and line diagrams • Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: • Per Diem / Housing • Weekly Pay • Referral Bonuses of up to $250 for referrals that result in a placement (Ask for details!) Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
11/13/2026
Full time
Job Description Job Description Data Center Technician ES7 or EE98 Certified We are currently hiring Data Center Technicians with experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need for skilled technicians. This Job will be in Santa Teresa, NM Data Center Technician Duties: • Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment • Pulling Fiber • Dressing, labeling and terminating low voltage wires • Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) • Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) • Rack and stack work, closet work, putting together server racks, patch panels Qualifications: • Familiarity with BICSI, EIA, TIA, or NEC Standards • Experience running or bending conduit, with digital multi-meters, and testing cable is a plus • Experience troubleshooting networking issues is a plus • Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus • Ability to read and understand schematic and line diagrams • Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: • Per Diem / Housing • Weekly Pay • Referral Bonuses of up to $250 for referrals that result in a placement (Ask for details!) Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
Job Description Job Description Data Center Technician - $20-$30/hr - DOE We are currently hiring Data Center Technicians with 6+ months of experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Montgomery Area. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Please apply today by clicking "Apply" below. Data Center Technician Duties: Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications: Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: Competitive starting pay $20-$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
11/13/2026
Full time
Job Description Job Description Data Center Technician - $20-$30/hr - DOE We are currently hiring Data Center Technicians with 6+ months of experience performing low voltage installation a data center environment. Candidates are encouraged to apply ASAP as we have an immediate need in the Montgomery Area. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Please apply today by clicking "Apply" below. Data Center Technician Duties: Pulling and routing CAT 5 or CAT 6 or Fiber cable in new construction and existing data center environment Dressing, labeling, and terminating low voltage wires Installing support structures (ladder racks, racks, switches, servers, j-hooks, cable trays, basket trays, etc.) Terminating voice and data jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) Rack and stack work, closet work, putting together server racks, patch panels Qualifications: Recent experience installing low voltage cable in new construction or data center environment is required Familiarity with BICSI, EIA, TIA, or NEC Standards Experience running or bending conduit, with digital multi-meters, and testing cable is a plus Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing is a plus Ability to read and understand schematic and line diagrams Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: Competitive starting pay $20-$30/hr or depending on experience Get paid weekly! Option to enroll in Medical, Dental, Vision, and contribute to 401K Referral Bonuses of up to $250 for referrals that result in a placement - simply click "REFER" below to share with a friend! Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California. Company Description Outsource is the largest staffing firm in the nation specializing in the placement of low voltage and electrical talent. We deploy crews of qualified technicians to electrical and low voltage contractors on a temporary basis in all 50 states, and we fill hundreds of permanent job openings directly with our clients each year. Outsource has been in business since 1998 with 24 locations across the nation. The company's headquarters is located in Los Angeles, California.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.
11/12/2026
Full time
Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.