Job Description Job Description Lentech is hiring a Configuration Manager Responsibilities: Provide Configuration Management support to Operations and Sustainment organization, specifically in support of the Configuration/Change Engineering Review Board (CERB) and lower-level Configuration Management Control Boards (CCBs) Assist the CERB Chair in providing comprehensive quality assurance and configuration management for all HPC Systems Serve as an advisor to (or non-voting member) Facilitate the management of software and hardware Configuration Items (CIs) Participate in the creation, update, and/review of Configuration Management (CM) Plans, and other associated documents. Implement hardware and software version control processes, policies and procedures Assist in maturing the Y33 request for change (RFC) processes across the CERB and CCBs Responsible for configuration management (CM) of developmental and operational systems. Works on developmental and operational teams to create and maintain configuration baselines (development, test, production, etc.) supporting developmental and operational systems. Uses or recommends automated CM tools to implement CM policies and procedures. Develops or modifies CM plans, policies, and procedures tailored to the complexity and scope of the developmental or operational system. Implement CM discipline for the entire life cycle of systems from initial requirements/capabilities baselines to system end-of-life. Perform change control and configuration audits. Required : Active and current TS.SCI w FSP through MD (DO NOT APPLY IF YON DONT HAVE THIS) CI poly MUST be within 5 years Eight (8) years' experience as a CM in programs and contracts of similar scope, type, and complexity is required. Education : Bachelor's degree in a technical or business discipline from an accredited college or university is required. Four (4) years of additional CM experience may be substituted for a bachelor's degree. A Master's degree may be substituted for two (2) years of experience, thereby reducing the total years of experience to six (6). If assigned to a developmental program, one (1) year of experience using a source code control system for a developmental program of similar scope and complexity is required. About Lentech, Inc. Lentech, Inc., provides technology-enabled IT Solutions and Mission Technical Solutions to civil, defense and intelligence customers. Through our accumulated years of experience, industry expertise, and strategic partnerships, Lentech has built mission-critical solutions for our federal and commercial customers. Lentech's clients achieve full life-cycle support and cost-effective managed services supporting enterprise computing and applications initiatives for Government agencies. Lentech's Mission Technical Solutions Division is focused on providing engineering, operations, I&T and technical services to civil and defense customers primarily in the aerospace fields. Lentech, Inc. is a performance-based company providing employees with challenging and interesting work, competitive pay and benefits, and opportunities to learn and grow. We focus on providing an environment of fun, sharing, collaboration and connection. Our culture is team oriented, non-hierarchical and entrepreneurial. It gives people a chance to participate and be a factor in the company's growth and success. Lentech, Inc. is an Equal Employment Opportunity (EEO) employer and considers all qualified applicants for employment without regard to race, color, religion, gender identification, national origin, sexual orientation, age, marital status, disability, protected veteran status, or any other factor prohibited by applicable law. We are proud of the diversity of our staff and seek diversity in our applicants. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our team members value the flexibility at Lentech that allows them to balance quality work and their personal lives. The range shown below is the national average for the position. The proposed salary range for this position is: $130,000.00-$147,000.00 Powered by JazzHR 34ja2G1TZu
09/22/2026
Full time
Job Description Job Description Lentech is hiring a Configuration Manager Responsibilities: Provide Configuration Management support to Operations and Sustainment organization, specifically in support of the Configuration/Change Engineering Review Board (CERB) and lower-level Configuration Management Control Boards (CCBs) Assist the CERB Chair in providing comprehensive quality assurance and configuration management for all HPC Systems Serve as an advisor to (or non-voting member) Facilitate the management of software and hardware Configuration Items (CIs) Participate in the creation, update, and/review of Configuration Management (CM) Plans, and other associated documents. Implement hardware and software version control processes, policies and procedures Assist in maturing the Y33 request for change (RFC) processes across the CERB and CCBs Responsible for configuration management (CM) of developmental and operational systems. Works on developmental and operational teams to create and maintain configuration baselines (development, test, production, etc.) supporting developmental and operational systems. Uses or recommends automated CM tools to implement CM policies and procedures. Develops or modifies CM plans, policies, and procedures tailored to the complexity and scope of the developmental or operational system. Implement CM discipline for the entire life cycle of systems from initial requirements/capabilities baselines to system end-of-life. Perform change control and configuration audits. Required : Active and current TS.SCI w FSP through MD (DO NOT APPLY IF YON DONT HAVE THIS) CI poly MUST be within 5 years Eight (8) years' experience as a CM in programs and contracts of similar scope, type, and complexity is required. Education : Bachelor's degree in a technical or business discipline from an accredited college or university is required. Four (4) years of additional CM experience may be substituted for a bachelor's degree. A Master's degree may be substituted for two (2) years of experience, thereby reducing the total years of experience to six (6). If assigned to a developmental program, one (1) year of experience using a source code control system for a developmental program of similar scope and complexity is required. About Lentech, Inc. Lentech, Inc., provides technology-enabled IT Solutions and Mission Technical Solutions to civil, defense and intelligence customers. Through our accumulated years of experience, industry expertise, and strategic partnerships, Lentech has built mission-critical solutions for our federal and commercial customers. Lentech's clients achieve full life-cycle support and cost-effective managed services supporting enterprise computing and applications initiatives for Government agencies. Lentech's Mission Technical Solutions Division is focused on providing engineering, operations, I&T and technical services to civil and defense customers primarily in the aerospace fields. Lentech, Inc. is a performance-based company providing employees with challenging and interesting work, competitive pay and benefits, and opportunities to learn and grow. We focus on providing an environment of fun, sharing, collaboration and connection. Our culture is team oriented, non-hierarchical and entrepreneurial. It gives people a chance to participate and be a factor in the company's growth and success. Lentech, Inc. is an Equal Employment Opportunity (EEO) employer and considers all qualified applicants for employment without regard to race, color, religion, gender identification, national origin, sexual orientation, age, marital status, disability, protected veteran status, or any other factor prohibited by applicable law. We are proud of the diversity of our staff and seek diversity in our applicants. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our team members value the flexibility at Lentech that allows them to balance quality work and their personal lives. The range shown below is the national average for the position. The proposed salary range for this position is: $130,000.00-$147,000.00 Powered by JazzHR 34ja2G1TZu
Job Description Job Description Overview Configuration Manager WORK LOCATION: Hanscom AFB, (Bedford, MA) Salary Range: $105-115,000.00 depen ding on experience, certifications, and qualifications JOB STATUS: Full-Time; Salaried SECURITY CLEARANCE: Secret clearance required at time of hiring Astrion has an opportunity for a Configuration Manager to directly support the Cyberspace Security and Control System (CSCS) program, which is within the C3I and Infrastructure Division (AFLCMC/HNI) and located at Hanscom AFB, MA. REQUIRED QUALIFICATIONS: Bachelor's degree in a related field and at least five years of experience in the respective technical / professional discipline, three of which must be in the DoD OR, seven years of directly related experience with proper certifications as described in the PWS labor category performance requirements, five of which must be in the DoD. PREFERRED QUALIFITICATIONS/SKILLS: IT CM experience within the DoD environment Experience performing hardware and software configuration audits Experience performing the technical/administrative activities necessary to manage CM tools for inventory control, version control, data duplication, and media labeling. Experience producing release notes and CM reports An in-depth understanding of the configuration change control process, the role of the Change Control Board, and change control documentation Experience performing baseline administrative activities for multiple environments Experience developing briefings for management Understanding of all phases of the software development life cycle Ability to enter and manipulate data in a database Strong attention to detail Strong organizational skills and the ability to multi-task Ability to work independently and with a team Experience in MS Office Suite software require RESPONSIBILITIES: Assist in developing and administering CM plans; maintaining design traceability and integrity; convening and managing change boards; and preparing for and attending major events such as, but not limited to, Technical Interchange Meetings, Preliminary Design Reviews, Critical Design Reviews, Physical Configuration Audits, Functional Configuration Audits, and Configuration Control Boards. Provide configuration and CDRL data manager (CM/DM), quality assurance, program/project, requirements analysis, risk management, and software engineering support services in accordance with the program's Configuration Management (CM) Plan, Air Force SEAM CM processes, program development/sustainment contracts, and PMO practices. Support activities will range across the CM, quality assurance, program/project, requirements analysis, risk management, and software engineering activities outlined in the task order PWS. Activities will vary depending upon the current activities of the program/system, scope of the current development/sustainment cycle, and other corporate and program initiatives. The individual must have progressive experience in managing configuration of software, engineering documents, design drawings, engineering changes and notices, and planning/conducting design audits to enable Government ownership of the program technical baseline. The individual must have skills and experience necessary to perform the following tasks: Provide CM of all relevant program artifacts Archive acquisition documentation Review and analyze the development/sustainment Contractor's CM program and data deliveries for accuracy, completeness, and compliance Maintain CM files including configuration identification, change control, and status accounting records Convene and manage the Configuration Control Boards, Technical Review Boards, and record approved changes and results Participate in cross-functional change control boards to evaluate proposed changes. Review and analyze proposed changes to ensure operational and sustainment capabilities are not adversely affected by the changes Review the Configuration Control Board membership list for currency and completeness. Support Engineering Assessments Prepare for, conduct, and/or support major audits such as Physical Configuration Audits and Functional Configuration Audits Record and maintain assessment and audit findings, minutes, and action items Report the Development/Sustainment 's data delivery status Support pre- and post-contract award data reviews Review and analyze the development/sustainment Contractor's conformance to CDRL requirements Process Government and development/sustainment Contractor correspondence. Support the establishment of workflows Track data item deliverables and responses Support development/sustainment of paper and automated archival systems of all covered documentation Work closely with program management, systems engineers, quality managers, draftsmen and design/manufacturing engineers in an integrated product team environment Develop and administer CM plans Maintain design traceability and integrity Assist the Government with configuration control for IT systems. This shall include configuration planning, data analysis, maintenance of configuration documentation and data, and maintaining inventory/configuration status Manage configurations of software, engineering documents, design drawings, engineering changes and notices, and planning/conducting design audits. The Contractor must have skills and experience necessary to work closely with program management, systems engineers, quality managers, and design engineers in an integrated product team environment Support review boards via meeting attendance and capture meeting minutes including the Configuration Control Board Track Change Requests and Discrepancy Reports/Problem Reports Ensure integrity of the baseline including major releases, minor releases, patches, and software maintenance Provide Quality Assurance checks on system baselines Support Licensing tasks and packaging and delivering of software to users Maintain the CM library and software repository Manage and control product baselines Recommend and document comprehensive CM plans for software, hardware, firmware, and peripherals for IT systems Analyze data and prepare plans and briefings in support of software-driven systems Perform studies and monitoring effectiveness of CM plans to identify potential and existing problems and make recommendations for resolution Audit and review IT system configurations Control the configuration of IT systems Identify and maintain all baselines Oversee the CM USAP Self Inspection Checklists, input results in MICT Create and maintain revisions to the CDRL packages Prepare and issue Data Calls Convene, manage, and participate in Data Requirements Review Boards and record approved requirements Receive and distribute CDRL data deliverables Maintain distribution lists of points of contact (POCs) of CDRL data deliverable for program's method of transmittal (i.e., a common mailbox, Integrated Digital Environment, CD-ROM, etc.) Ensure integrity of CDRL justification forms Monitor Contractor compliance of CDRL data deliverables Provide CM/DM input into all program documentation. Hanscom Campaign
09/22/2026
Full time
Job Description Job Description Overview Configuration Manager WORK LOCATION: Hanscom AFB, (Bedford, MA) Salary Range: $105-115,000.00 depen ding on experience, certifications, and qualifications JOB STATUS: Full-Time; Salaried SECURITY CLEARANCE: Secret clearance required at time of hiring Astrion has an opportunity for a Configuration Manager to directly support the Cyberspace Security and Control System (CSCS) program, which is within the C3I and Infrastructure Division (AFLCMC/HNI) and located at Hanscom AFB, MA. REQUIRED QUALIFICATIONS: Bachelor's degree in a related field and at least five years of experience in the respective technical / professional discipline, three of which must be in the DoD OR, seven years of directly related experience with proper certifications as described in the PWS labor category performance requirements, five of which must be in the DoD. PREFERRED QUALIFITICATIONS/SKILLS: IT CM experience within the DoD environment Experience performing hardware and software configuration audits Experience performing the technical/administrative activities necessary to manage CM tools for inventory control, version control, data duplication, and media labeling. Experience producing release notes and CM reports An in-depth understanding of the configuration change control process, the role of the Change Control Board, and change control documentation Experience performing baseline administrative activities for multiple environments Experience developing briefings for management Understanding of all phases of the software development life cycle Ability to enter and manipulate data in a database Strong attention to detail Strong organizational skills and the ability to multi-task Ability to work independently and with a team Experience in MS Office Suite software require RESPONSIBILITIES: Assist in developing and administering CM plans; maintaining design traceability and integrity; convening and managing change boards; and preparing for and attending major events such as, but not limited to, Technical Interchange Meetings, Preliminary Design Reviews, Critical Design Reviews, Physical Configuration Audits, Functional Configuration Audits, and Configuration Control Boards. Provide configuration and CDRL data manager (CM/DM), quality assurance, program/project, requirements analysis, risk management, and software engineering support services in accordance with the program's Configuration Management (CM) Plan, Air Force SEAM CM processes, program development/sustainment contracts, and PMO practices. Support activities will range across the CM, quality assurance, program/project, requirements analysis, risk management, and software engineering activities outlined in the task order PWS. Activities will vary depending upon the current activities of the program/system, scope of the current development/sustainment cycle, and other corporate and program initiatives. The individual must have progressive experience in managing configuration of software, engineering documents, design drawings, engineering changes and notices, and planning/conducting design audits to enable Government ownership of the program technical baseline. The individual must have skills and experience necessary to perform the following tasks: Provide CM of all relevant program artifacts Archive acquisition documentation Review and analyze the development/sustainment Contractor's CM program and data deliveries for accuracy, completeness, and compliance Maintain CM files including configuration identification, change control, and status accounting records Convene and manage the Configuration Control Boards, Technical Review Boards, and record approved changes and results Participate in cross-functional change control boards to evaluate proposed changes. Review and analyze proposed changes to ensure operational and sustainment capabilities are not adversely affected by the changes Review the Configuration Control Board membership list for currency and completeness. Support Engineering Assessments Prepare for, conduct, and/or support major audits such as Physical Configuration Audits and Functional Configuration Audits Record and maintain assessment and audit findings, minutes, and action items Report the Development/Sustainment 's data delivery status Support pre- and post-contract award data reviews Review and analyze the development/sustainment Contractor's conformance to CDRL requirements Process Government and development/sustainment Contractor correspondence. Support the establishment of workflows Track data item deliverables and responses Support development/sustainment of paper and automated archival systems of all covered documentation Work closely with program management, systems engineers, quality managers, draftsmen and design/manufacturing engineers in an integrated product team environment Develop and administer CM plans Maintain design traceability and integrity Assist the Government with configuration control for IT systems. This shall include configuration planning, data analysis, maintenance of configuration documentation and data, and maintaining inventory/configuration status Manage configurations of software, engineering documents, design drawings, engineering changes and notices, and planning/conducting design audits. The Contractor must have skills and experience necessary to work closely with program management, systems engineers, quality managers, and design engineers in an integrated product team environment Support review boards via meeting attendance and capture meeting minutes including the Configuration Control Board Track Change Requests and Discrepancy Reports/Problem Reports Ensure integrity of the baseline including major releases, minor releases, patches, and software maintenance Provide Quality Assurance checks on system baselines Support Licensing tasks and packaging and delivering of software to users Maintain the CM library and software repository Manage and control product baselines Recommend and document comprehensive CM plans for software, hardware, firmware, and peripherals for IT systems Analyze data and prepare plans and briefings in support of software-driven systems Perform studies and monitoring effectiveness of CM plans to identify potential and existing problems and make recommendations for resolution Audit and review IT system configurations Control the configuration of IT systems Identify and maintain all baselines Oversee the CM USAP Self Inspection Checklists, input results in MICT Create and maintain revisions to the CDRL packages Prepare and issue Data Calls Convene, manage, and participate in Data Requirements Review Boards and record approved requirements Receive and distribute CDRL data deliverables Maintain distribution lists of points of contact (POCs) of CDRL data deliverable for program's method of transmittal (i.e., a common mailbox, Integrated Digital Environment, CD-ROM, etc.) Ensure integrity of CDRL justification forms Monitor Contractor compliance of CDRL data deliverables Provide CM/DM input into all program documentation. Hanscom Campaign
Rolls Royce Motor Cars seeks a Control System Configuration Manager to own configuration standards for our ultra luxury vehicle manufacturing systems. You will manage PLC and control software versions, change control, and documentation, ensuring traceability, stability, and cybersecurity across production lines. Partnering with engineering, quality, and production, you'll plan and deploy configuration releases, support root cause analysis, and drive continuous improvement. This role blends precision, craftsmanship, and advanced engineering within a collaborative BMW Group environment with global career potential. Responsibilities Develop and maintain control system configuration standards for manufacturing lines Manage version control, change management, and documentation for PLC and control software Coordinate configuration releases with engineering, production, and quality teams Monitor system performance and ensure configuration integrity and traceability Support troubleshooting, root cause analysis, and corrective actions for control issues Implement cybersecurity and access control best practices for control systems Collaborate with BMW Group counterparts on shared tools and methods Identify and drive continuous improvement in configuration processes and tooling Required Skills PLC programming (Siemens/Allen Bradley) Industrial control systems (SCADA/HMI) Configuration and version control (e.g., Git, TIA Portal libraries) Change management processes in manufacturing Industrial networking (Profinet/Ether Net/IP) Control system cybersecurity best practices Technical documentation and configuration baselining Root cause analysis and troubleshooting Automotive or discrete manufacturing automation Continuous improvement/Lean in automation environments
09/22/2026
Full time
Rolls Royce Motor Cars seeks a Control System Configuration Manager to own configuration standards for our ultra luxury vehicle manufacturing systems. You will manage PLC and control software versions, change control, and documentation, ensuring traceability, stability, and cybersecurity across production lines. Partnering with engineering, quality, and production, you'll plan and deploy configuration releases, support root cause analysis, and drive continuous improvement. This role blends precision, craftsmanship, and advanced engineering within a collaborative BMW Group environment with global career potential. Responsibilities Develop and maintain control system configuration standards for manufacturing lines Manage version control, change management, and documentation for PLC and control software Coordinate configuration releases with engineering, production, and quality teams Monitor system performance and ensure configuration integrity and traceability Support troubleshooting, root cause analysis, and corrective actions for control issues Implement cybersecurity and access control best practices for control systems Collaborate with BMW Group counterparts on shared tools and methods Identify and drive continuous improvement in configuration processes and tooling Required Skills PLC programming (Siemens/Allen Bradley) Industrial control systems (SCADA/HMI) Configuration and version control (e.g., Git, TIA Portal libraries) Change management processes in manufacturing Industrial networking (Profinet/Ether Net/IP) Control system cybersecurity best practices Technical documentation and configuration baselining Root cause analysis and troubleshooting Automotive or discrete manufacturing automation Continuous improvement/Lean in automation environments
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
09/22/2026
Full time
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
MSEI US - Micro Systems Engineering
Lake Oswego, Oregon
Job description The Implant Software Staff Engineer designs and develops embedded real-time software for innovative cardiac implantable medical devices operating under extreme power, memory and performance constraints. This role applies deep technical expertise across the software lifecycle within a highly regulated environment, requiring disciplined engineering practices and strong written communication. The position demands broad and advanced software development experience and may include technical leadership, design ownership, and cross-functional leadership. Your Key Responsibilities Participate in all phases of the software development process, including requirements definition, analysis and design, implementation and debugging, peer reviews, unit testing, developer verification, and development of accurate personal schedules within the broader team schedule. Help determine technical approaches to assignments, using best practices. Generate and maintain software documentation required for the project according to the Company's policies and procedures. Collaborates cross-functionally with ASIC, external device software, systems engineering and clinical teams. Owns key embedded software components and interface with external applications. Contribute to completion of project milestones. Solve diverse and complex problems within the context of existing architecture. Follow process and foster a culture of continuous process improvement. May serve as project lead on small-scale projects. May provide technical mentoring and coaching to lower-level software engineers. Other duties may be assigned at the discretion of the manager. Required profile Education / Experience Requirements Understanding of 8-bit microprocessor/microcontroller architecture and demonstrated ability to design, implement and debug code in that environment. Strong experience in C and assembly. Experience working with configuration management and defect tracking tools. BS/MS Degree in engineering in the field of Computer Science, Computer Engineering, Electrical Engineering or related field. Minimum 8 years graduate-level coursework and/or experience in embedded software development. At least 1 year experience in medical device or similarly regulated industry. Demonstrable success in driving one or more strategic features to completion. Additional Preferred Knowledge, Skills, Abilities Software development for very low power, low memory applications Proficiency with bare metal or RTOS environments Knowledge of cybersecurity principals for embedded systems Software development for FDA Class III implantable medical devices Object oriented design concepts Strong team skills Travel Requirements Must be able to travel internationally and domestically, less than 5% of the time. Physical Requirements The physical demands described within this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer for extended periods of time and communicate with co-workers. Must be able to work a minimum of 40 hours / week. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values - innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer Work Environment Engineer work environment: If onsite, this role is based in a temperature controlled professional office setting, which may include an office or cubicle with quiet to moderate noise level. If remote, the work environment is the employee's residence. Work may need to be completed on campus in a lab. The noise level in the lab is quiet to moderate. Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee.
09/22/2026
Full time
Job description The Implant Software Staff Engineer designs and develops embedded real-time software for innovative cardiac implantable medical devices operating under extreme power, memory and performance constraints. This role applies deep technical expertise across the software lifecycle within a highly regulated environment, requiring disciplined engineering practices and strong written communication. The position demands broad and advanced software development experience and may include technical leadership, design ownership, and cross-functional leadership. Your Key Responsibilities Participate in all phases of the software development process, including requirements definition, analysis and design, implementation and debugging, peer reviews, unit testing, developer verification, and development of accurate personal schedules within the broader team schedule. Help determine technical approaches to assignments, using best practices. Generate and maintain software documentation required for the project according to the Company's policies and procedures. Collaborates cross-functionally with ASIC, external device software, systems engineering and clinical teams. Owns key embedded software components and interface with external applications. Contribute to completion of project milestones. Solve diverse and complex problems within the context of existing architecture. Follow process and foster a culture of continuous process improvement. May serve as project lead on small-scale projects. May provide technical mentoring and coaching to lower-level software engineers. Other duties may be assigned at the discretion of the manager. Required profile Education / Experience Requirements Understanding of 8-bit microprocessor/microcontroller architecture and demonstrated ability to design, implement and debug code in that environment. Strong experience in C and assembly. Experience working with configuration management and defect tracking tools. BS/MS Degree in engineering in the field of Computer Science, Computer Engineering, Electrical Engineering or related field. Minimum 8 years graduate-level coursework and/or experience in embedded software development. At least 1 year experience in medical device or similarly regulated industry. Demonstrable success in driving one or more strategic features to completion. Additional Preferred Knowledge, Skills, Abilities Software development for very low power, low memory applications Proficiency with bare metal or RTOS environments Knowledge of cybersecurity principals for embedded systems Software development for FDA Class III implantable medical devices Object oriented design concepts Strong team skills Travel Requirements Must be able to travel internationally and domestically, less than 5% of the time. Physical Requirements The physical demands described within this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer for extended periods of time and communicate with co-workers. Must be able to work a minimum of 40 hours / week. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values - innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer Work Environment Engineer work environment: If onsite, this role is based in a temperature controlled professional office setting, which may include an office or cubicle with quiet to moderate noise level. If remote, the work environment is the employee's residence. Work may need to be completed on campus in a lab. The noise level in the lab is quiet to moderate. Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee.
MSEI US - Micro Systems Engineering
Lake Oswego, Oregon
Job description SUMMARY The Staff Software Development Engineer is a senior technical contributor responsible for the architecture, design, development, verification, and maintenance of software used in implantable spinal cord stimulation systems and supporting clinical applications. This role provides technical leadership across software development efforts while ensuring compliance with medical device regulations and quality standards. The Staff Engineer collaborates closely with cross-functional teams including Systems Engineering, Electrical Engineering, Firmware, Quality Assurance, Regulatory Affairs, Clinical Affairs, and Product Management to develop safe, reliable, and effective software solutions that improve patient outcomes. PRIMARY JOB RESPONSIBILITIES Lead the design and development of software for medical devices, clinician programmer applications, patient applications, and supporting cloud or desktop systems. Define software architecture and technical direction for complex projects spanning multiple software components. Develop high-quality, maintainable, and well-tested software following established software engineering principles and coding standards. Participate in product planning, requirements analysis, system design, risk analysis, implementation, verification, and product release activities. Ensure software development complies with applicable quality system regulations and standards, including FDA Quality System Regulation and other applicable standards. Perform technical reviews of software requirements, architecture, source code, test plans, and design documentation. Mentor software engineers by promoting engineering best practices, code quality, design patterns, and continuous improvement. Collaborate with systems, firmware, hardware, and clinical engineering teams to integrate software with implantable neurostimulation devices. Support cybersecurity, software reliability, and performance initiatives throughout the product lifecycle. Investigate field issues and implement corrective and preventive actions when required. Contribute to software process improvements, development tools, automated testing, and continuous integration pipelines. Participate in design reviews, hazard analyses, and risk management activities to ensure patient safety. Provide technical guidance during regulatory submissions and product audits. Required profile REQUIRED QUALIFICATIONS Bachelor's degree in Computer Science, Software Engineering, Computer Engineering, or related technical field. 6+ years of professional software development experience. Extensive experience designing and developing complex software applications using modern programming languages such as C#, C++, Kotlin. Experience developing software using object-oriented design principles and software architecture patterns. Strong understanding of Agile software development methodologies. Experience with version control systems such as Git. Strong analytical, debugging, and problem-solving skills. Excellent written and verbal communication skills. Demonstrated ability to lead technical initiatives without direct managerial responsibility. PREFERRED QUALIFICATIONS Master's degree in Computer Science, Engineering, or related field. Knowledge of NoSQL Experience developing software for regulated medical devices. Knowledge of IEC standards, and FDA software guidance, and cybersecurity requirements for medical devices. Experience with Bluetooth Low Energy (BLE), embedded communications, or implantable medical device interfaces. Experience developing Android (Kotlin), Windows(UWP/Xamarin). Experience with automated testing frameworks, CI/CD pipelines, and static code analysis tools. Familiarity with cloud-connected medical systems and secure data communication. Key Performance Expectations Deliver high-quality software that meets functional, performance, safety, and regulatory requirements. Drive technical decisions that improve scalability, maintainability, and reliability. Ensure software documentation is complete, accurate, and audit-ready. Reduce software defects through design reviews, code reviews, and comprehensive testing. Foster engineering excellence by mentoring developers and promoting software best practices. Support successful regulatory submissions and product releases through technical expertise and documentation quality. TRAVEL REQUIREMENTS Must be able to travel internationally and domestically, less than 15% of the time. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values - innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer This position is Hybrid, based in out Lake Oswego, Oregon office. Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee. MSEI Lake Oswego United States (US)
09/22/2026
Full time
Job description SUMMARY The Staff Software Development Engineer is a senior technical contributor responsible for the architecture, design, development, verification, and maintenance of software used in implantable spinal cord stimulation systems and supporting clinical applications. This role provides technical leadership across software development efforts while ensuring compliance with medical device regulations and quality standards. The Staff Engineer collaborates closely with cross-functional teams including Systems Engineering, Electrical Engineering, Firmware, Quality Assurance, Regulatory Affairs, Clinical Affairs, and Product Management to develop safe, reliable, and effective software solutions that improve patient outcomes. PRIMARY JOB RESPONSIBILITIES Lead the design and development of software for medical devices, clinician programmer applications, patient applications, and supporting cloud or desktop systems. Define software architecture and technical direction for complex projects spanning multiple software components. Develop high-quality, maintainable, and well-tested software following established software engineering principles and coding standards. Participate in product planning, requirements analysis, system design, risk analysis, implementation, verification, and product release activities. Ensure software development complies with applicable quality system regulations and standards, including FDA Quality System Regulation and other applicable standards. Perform technical reviews of software requirements, architecture, source code, test plans, and design documentation. Mentor software engineers by promoting engineering best practices, code quality, design patterns, and continuous improvement. Collaborate with systems, firmware, hardware, and clinical engineering teams to integrate software with implantable neurostimulation devices. Support cybersecurity, software reliability, and performance initiatives throughout the product lifecycle. Investigate field issues and implement corrective and preventive actions when required. Contribute to software process improvements, development tools, automated testing, and continuous integration pipelines. Participate in design reviews, hazard analyses, and risk management activities to ensure patient safety. Provide technical guidance during regulatory submissions and product audits. Required profile REQUIRED QUALIFICATIONS Bachelor's degree in Computer Science, Software Engineering, Computer Engineering, or related technical field. 6+ years of professional software development experience. Extensive experience designing and developing complex software applications using modern programming languages such as C#, C++, Kotlin. Experience developing software using object-oriented design principles and software architecture patterns. Strong understanding of Agile software development methodologies. Experience with version control systems such as Git. Strong analytical, debugging, and problem-solving skills. Excellent written and verbal communication skills. Demonstrated ability to lead technical initiatives without direct managerial responsibility. PREFERRED QUALIFICATIONS Master's degree in Computer Science, Engineering, or related field. Knowledge of NoSQL Experience developing software for regulated medical devices. Knowledge of IEC standards, and FDA software guidance, and cybersecurity requirements for medical devices. Experience with Bluetooth Low Energy (BLE), embedded communications, or implantable medical device interfaces. Experience developing Android (Kotlin), Windows(UWP/Xamarin). Experience with automated testing frameworks, CI/CD pipelines, and static code analysis tools. Familiarity with cloud-connected medical systems and secure data communication. Key Performance Expectations Deliver high-quality software that meets functional, performance, safety, and regulatory requirements. Drive technical decisions that improve scalability, maintainability, and reliability. Ensure software documentation is complete, accurate, and audit-ready. Reduce software defects through design reviews, code reviews, and comprehensive testing. Foster engineering excellence by mentoring developers and promoting software best practices. Support successful regulatory submissions and product releases through technical expertise and documentation quality. TRAVEL REQUIREMENTS Must be able to travel internationally and domestically, less than 15% of the time. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values - innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer This position is Hybrid, based in out Lake Oswego, Oregon office. Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee. MSEI Lake Oswego United States (US)
Job Description Job Description ATFM Analyst / Strategist CGH Technologies, Inc. (CGH) is a business solutions firm specializing in Data Management, Software Engineering, and Business Intelligence. Based in the Washington, D.C. corridor, CGH supports government, commercial, and international clients with management consulting, software development, infrastructure and facilities support, and program management for large, complex operational environments. CGH has an exciting opportunity for an Air Traffic Flow Management (ATFM) Analyst / Strategist to join our team supporting the FAA's PERTI program. Position Overview The ATFM Analyst / Strategist provides operational analysis, advanced planning, and customer support for the PERTI contract. This position works closely with FAA personnel, aviation stakeholders, meteorologists, field facilities, and other operational partners to analyze conditions across the National Airspace System (NAS), identify potential constraints, and support the development and communication of strategic traffic management plans. This is a mission-critical position supporting a 24/7/365 operational environment. Key Responsibilities Schedule and support OPS and PERTI webinars. Review, analyze, and maintain OPSNET, NAS Daily, and other operational reports. Analyze weather products, Technical Operations data, system impact reports, traffic demand, and other potential constraints to develop PERTI advanced planning content. Collaborate with National Aviation Meteorologists to review forecast en route and terminal conditions, outlooks, maps, and potential operational impacts. Develop, review, and conduct daily collaborative advanced planning webinars and supporting PDF materials. Prepare, finalize, distribute, and upload advanced planning documents to FAA systems and websites. Provide direct support to the National Operations Manager (NOM) and Planner during planning webinars, including presentation preparation, slide updates, call-list management, log entries, and advisories. Coordinate with NAV CANADA regarding potential constraints, CAN routes, and other cross-border operational considerations. Manage Zoom webinar registration, information sharing, attendee reporting, and scheduling. Coordinate with field facilities, airlines, aviation representatives, and DDSO offices regarding SIRs, construction, weather, and other events that may affect NAS operations. Coordinate with ATCSCC Space Operations regarding launch and recovery activities, including potential NAS impacts, NOTAM information, and development of supporting graphics. Conduct VACAPES next-day planning conferences with ZDC, Giantkiller, ZBW, and ZNY when required. Develop materials and participate in weekly CADENA web conferences. Prepare daily summaries of significant NAS activity. Provide same-day, prior-day, next-day, historical, demand, and Traffic Management Initiative (TMI) analysis in response to operational needs and ad hoc NOM requests. Compile and complete the daily PERTI plan review and distribute it to appropriate stakeholders and managers. Provide training and briefings to new NTMOs on PERTI responsibilities, tools, processes, and planning fundamentals. Provide coaching, feedback, and mentoring to NTMOs training on operational planner and PERTI responsibilities. Support the development and continuous improvement of operational and planning tools, processes, and procedures. QUALIFICATIONS Experience 3+ years of demonstrated hands-on experience in an Analyst/Strategist or related role. Experience supporting complex, time-sensitive aviation or operational environments is preferred. Education Bachelor's degree required. Degree in Engineering, Science, Mathematics, or a related technical discipline preferred. Technical & Computer Skills Proficiency with Microsoft Office Suite. Ability to review, interpret, and communicate operational and technical information. Ability to analyze multiple sources of data and translate findings into clear, actionable planning information. Knowledge, Skills & Abilities U.S. Citizen or person with valid U.S. Work Visa who has lived in the U.S. for three or more years. Must be available for shift work (day, swing, evening) as the team operates 24x7x365, including holidays. Strong interpersonal, verbal, and written communication skills. Must be highly organized, reliable, and possess excellent time-management skills. Must be a team player with a proactive work style. Strong analytical and problem-solving skills. Ability to prioritize and perform effectively in a fast-paced, mission-critical operational environment. Ability to work effectively with government customers, operational personnel, and aviation industry stakeholders. Ability to work independently while contributing effectively within a collaborative team environment. Physical Requirements While performing the duties of this position, the individual is regularly required to sit, stand, talk, hear, and use a computer, keyboard, and mouse for several hours each day. Occasional light lifting of up to 10 pounds may be required. Government Eligibility Candidates selected will be subject to a Government background investigation and must meet eligibility requirements. Compensation The hiring range for this position, expressed as an annualized full-time equivalent (FTE), is $150K-$160K pe r year , based on relevant experience and position requirements as determined by the customer parameters. Please note: This is a part-time position. Actual earnings will be prorated based on the employee's scheduled hours. Benefits CGH offers a comprehensive benefits package, including: 401(k) retirement plan Paid Time Off (PTO) Join the CGH Team If you are an analytical, collaborative aviation professional who thrives in a dynamic operational environment and wants to contribute to the safe and efficient operation of the National Airspace System, we encourage you to apply. CGH Technologies, Inc. is an Equal Opportunity Employer. Job Posted by ApplicantPro
09/22/2026
Full time
Job Description Job Description ATFM Analyst / Strategist CGH Technologies, Inc. (CGH) is a business solutions firm specializing in Data Management, Software Engineering, and Business Intelligence. Based in the Washington, D.C. corridor, CGH supports government, commercial, and international clients with management consulting, software development, infrastructure and facilities support, and program management for large, complex operational environments. CGH has an exciting opportunity for an Air Traffic Flow Management (ATFM) Analyst / Strategist to join our team supporting the FAA's PERTI program. Position Overview The ATFM Analyst / Strategist provides operational analysis, advanced planning, and customer support for the PERTI contract. This position works closely with FAA personnel, aviation stakeholders, meteorologists, field facilities, and other operational partners to analyze conditions across the National Airspace System (NAS), identify potential constraints, and support the development and communication of strategic traffic management plans. This is a mission-critical position supporting a 24/7/365 operational environment. Key Responsibilities Schedule and support OPS and PERTI webinars. Review, analyze, and maintain OPSNET, NAS Daily, and other operational reports. Analyze weather products, Technical Operations data, system impact reports, traffic demand, and other potential constraints to develop PERTI advanced planning content. Collaborate with National Aviation Meteorologists to review forecast en route and terminal conditions, outlooks, maps, and potential operational impacts. Develop, review, and conduct daily collaborative advanced planning webinars and supporting PDF materials. Prepare, finalize, distribute, and upload advanced planning documents to FAA systems and websites. Provide direct support to the National Operations Manager (NOM) and Planner during planning webinars, including presentation preparation, slide updates, call-list management, log entries, and advisories. Coordinate with NAV CANADA regarding potential constraints, CAN routes, and other cross-border operational considerations. Manage Zoom webinar registration, information sharing, attendee reporting, and scheduling. Coordinate with field facilities, airlines, aviation representatives, and DDSO offices regarding SIRs, construction, weather, and other events that may affect NAS operations. Coordinate with ATCSCC Space Operations regarding launch and recovery activities, including potential NAS impacts, NOTAM information, and development of supporting graphics. Conduct VACAPES next-day planning conferences with ZDC, Giantkiller, ZBW, and ZNY when required. Develop materials and participate in weekly CADENA web conferences. Prepare daily summaries of significant NAS activity. Provide same-day, prior-day, next-day, historical, demand, and Traffic Management Initiative (TMI) analysis in response to operational needs and ad hoc NOM requests. Compile and complete the daily PERTI plan review and distribute it to appropriate stakeholders and managers. Provide training and briefings to new NTMOs on PERTI responsibilities, tools, processes, and planning fundamentals. Provide coaching, feedback, and mentoring to NTMOs training on operational planner and PERTI responsibilities. Support the development and continuous improvement of operational and planning tools, processes, and procedures. QUALIFICATIONS Experience 3+ years of demonstrated hands-on experience in an Analyst/Strategist or related role. Experience supporting complex, time-sensitive aviation or operational environments is preferred. Education Bachelor's degree required. Degree in Engineering, Science, Mathematics, or a related technical discipline preferred. Technical & Computer Skills Proficiency with Microsoft Office Suite. Ability to review, interpret, and communicate operational and technical information. Ability to analyze multiple sources of data and translate findings into clear, actionable planning information. Knowledge, Skills & Abilities U.S. Citizen or person with valid U.S. Work Visa who has lived in the U.S. for three or more years. Must be available for shift work (day, swing, evening) as the team operates 24x7x365, including holidays. Strong interpersonal, verbal, and written communication skills. Must be highly organized, reliable, and possess excellent time-management skills. Must be a team player with a proactive work style. Strong analytical and problem-solving skills. Ability to prioritize and perform effectively in a fast-paced, mission-critical operational environment. Ability to work effectively with government customers, operational personnel, and aviation industry stakeholders. Ability to work independently while contributing effectively within a collaborative team environment. Physical Requirements While performing the duties of this position, the individual is regularly required to sit, stand, talk, hear, and use a computer, keyboard, and mouse for several hours each day. Occasional light lifting of up to 10 pounds may be required. Government Eligibility Candidates selected will be subject to a Government background investigation and must meet eligibility requirements. Compensation The hiring range for this position, expressed as an annualized full-time equivalent (FTE), is $150K-$160K pe r year , based on relevant experience and position requirements as determined by the customer parameters. Please note: This is a part-time position. Actual earnings will be prorated based on the employee's scheduled hours. Benefits CGH offers a comprehensive benefits package, including: 401(k) retirement plan Paid Time Off (PTO) Join the CGH Team If you are an analytical, collaborative aviation professional who thrives in a dynamic operational environment and wants to contribute to the safe and efficient operation of the National Airspace System, we encourage you to apply. CGH Technologies, Inc. is an Equal Opportunity Employer. Job Posted by ApplicantPro
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
09/22/2026
Full time
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
09/22/2026
Full time
Job Description Job Description The GEOINT History Program Specialist - Mid, is responsible for the development and execution of the historical program, from research and writing to curation and operations. This individual supports the operation and maintenance of the NGA history archives and all associated material residing in the Historical Research Center, and to preserve and communicate NGA's history to NGA's employees and public affairs mission both internally and externally. Duties include content development and execution, museum support, and Historical Research Center archiving and curation. Duties Include: Content Development & Execution: Research, develop, and execute a high volume of historical content illustrating NGA's history for both internal and external audiences. Products include articles, brochures, social media posts, podcast production, website content, museum exhibits, and museum tour guides. Historical Research Center Archiving: Archival processing, customary basic preservation procedures, inventorying and entering records metadata, assisting in collaborative efforts with NGA Records Management and the National Archives. Organize archival records and apply the proper classification systems to facilitate access to archival materials while providing reference services and assistance for users needing archival materials. Research and record the origins and historical significance of archival materials. Answer and receive external phone/email inquiries and ability to conduct the background research to generate a response. Historical Research Center Curation: Record processing for artifacts and assistance with the inventorying and enforcing accountability procedures for historical artifacts in NGA custody. Ensuring measurement and metrics are accurately recorded. Locate new materials and advise government customers on acquisition, preservation, and display possibilities. Assist the Program Manager and NGA Historian on NGA's history audit including attending meetings, working with auditors, and performing curation inspections as required. Work deaccessions forms and reports for items along with managing the removal process from start to finish. NGA Museum Support: Work with other museums on loans, exhibits, artifact solicitation, and advise in acquisition decisions. This also includes researching, developing, and producing historical displays, posters, exhibits, museum experiences, and any museum specific communications about NGA history program. Provide guided tours of the museum and exhibits. Requirements Required Skills: Education: A minimum of a bachelor's degree from an accredited institution in History, Geography, Library Science, Museum Studies, Museum Science, or a related field. 1-year experience in the career field of curation or a certificate from an approved technical curatorial program in museum management required. Experience: A minimum of 5 years of hands-on experience in the career field of history, geography, library science, museum studies, or museum science role. In lieu of a bachelor's degree, the candidate must have 5+ years of direct museum practice, artifact preservation, curation, or history-related positions. Communication Skills: Strong written and verbal communication abilities with an eagerness to draft, edit, and proofread materials. Attention to Detail: A high degree of accuracy and thoroughness when completing tasks such as inventorying and entering records metadata or recording the origins and significance of archival materials. Organizational Skills: The ability to assist with multiple tasks and prioritize assignments effectively in a fast-paced support role. Organize archival records and apply the proper classification systems to facilitate access to archival materials. Interpersonal Skills: The ability to build effective working relationships with internal colleagues and community partners. Written and Verbal Communication: Strong writing, editing, and presentation skills, with the ability to translate complex information into clear, accessible language. Benefits Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS 401k Contribution from Day 1 PTO + 11 Paid Federal Holidays Long & Short Term Disability Insurance Group Term Life Insurance Tuition, Certification & Professional Development Assistance Workers' Compensation Relocation Assistance Candidate AI Usage Policy AI tools are an important part of daily work at ENS Solutions, and we are committed to their responsible and ethical use. To ensure a fair and equitable candidate evaluation based on individual skills, knowledge, and experience, candidates are not permitted to use artificial intelligence or other assistive tools during interviews, whether in person or virtual, unless explicit permission has been granted in advance.
MSEI US - Micro Systems Engineering
Lake Oswego, Oregon
Job description We are looking for a talented Senior Engineer to join our elite Factory Software Development team. This is an exciting opportunity for an individual to contribute to automation of manufacturing processes by developing systems and software solutions for robotics, data analysis, factory management, machine interfaces, and dashboards projects. Your Responsibilities Develop, integrate, and deploy multi-platform software solutions Define and promote software architectures Contribute to system design Identify, generate, and update all required documentation to support software and systems Other duties may be assigned at the discretion of the manager Required profile Education & Experience Requirements Bachelor's degree in the field of computer engineering, computer science, electrical engineering, or a related field Minimum 4 years of software development work experience. Experience managing projects. Additional Preferred Knowledge, Skills, Abilities Master's degree in the field of computer engineering, computer science or electrical engineering 3 years of experience in object-oriented software development at the graduate level or in industry Experience with one or more of the following technologies: enterprise applications, AI agent development, Model Context Protocol, database management, web development, mobile applications Experience with C# software development Experience with Agile methodology and tools Experience with all aspects of the software development process, including software requirements, software design, software integration, debugging and testing, and software documentation Demonstrated success in driving one or more projects to completion Experience in medical device or similarly regulated industry Physical Requirements The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values -innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee.
09/22/2026
Full time
Job description We are looking for a talented Senior Engineer to join our elite Factory Software Development team. This is an exciting opportunity for an individual to contribute to automation of manufacturing processes by developing systems and software solutions for robotics, data analysis, factory management, machine interfaces, and dashboards projects. Your Responsibilities Develop, integrate, and deploy multi-platform software solutions Define and promote software architectures Contribute to system design Identify, generate, and update all required documentation to support software and systems Other duties may be assigned at the discretion of the manager Required profile Education & Experience Requirements Bachelor's degree in the field of computer engineering, computer science, electrical engineering, or a related field Minimum 4 years of software development work experience. Experience managing projects. Additional Preferred Knowledge, Skills, Abilities Master's degree in the field of computer engineering, computer science or electrical engineering 3 years of experience in object-oriented software development at the graduate level or in industry Experience with one or more of the following technologies: enterprise applications, AI agent development, Model Context Protocol, database management, web development, mobile applications Experience with C# software development Experience with Agile methodology and tools Experience with all aspects of the software development process, including software requirements, software design, software integration, debugging and testing, and software documentation Demonstrated success in driving one or more projects to completion Experience in medical device or similarly regulated industry Physical Requirements The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Company description Working for Micro Systems Engineering, Inc. (MSEI) means joining an elite team to work on some of the most exciting challenges in medical technology today. We are a pioneer in developing innovative implantable medical device technologies and devices that save and enhance the quality of life for millions of individuals living with cardiovascular and chronic neurologic pain disorders. With more than 40 years of experience in design and manufacturing of active implantable medical devices, our continuing success is based on our company's core values -innovation, quality, reliability, integrity, teamwork, and undisputed expertise - thus enabling us to inspire confidence and trust in physicians and patients worldwide. We are continually looking for talented engineers, scientists, and professionals to share in our mission. What we offer Micro Systems Engineering, Inc. is an equal opportunity employer. In accordance with applicable law, the company prohibits discrimination based on race, color, religion, creed, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, sexual orientation, genetic information, uniformed service or any other consideration protected by federal state and local laws. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee.
Job description: We are seeking a talented, tenacious, results driven individual to work in a multi-disciplinary R&D environment with likeminded motivated electrical engineers, mathematicians, and computer scientists who are collectively responsible for creating custom geolocation and digital communications systems in support of national security defense. Core responsibilities include creative problem solving, researching or inventing advanced geolocation algorithms, implementing them in efficient software, testing with real-world data, and deploying to front-line customer facilities. Our dynamic environment and diverse projects demand flexibility to learn new technologies quickly. Our personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M. Core responsibilities include: Design/architect, develop, test, deploy, and operate fully integrated software Design, build, and maintain infrastructure for modern integration between our applications and third-party services Collaborate extremely effectively with product managers, designers, other engineers, stakeholders, and vendors on projects within the team. Communicate technical ideas and work closely with other senior members of the team. You will also provide technical leadership and guidance to junior team members and mentor others to grow in their technical abilities. A key responsibility is staying up-to-date with the latest technologies, tools, and methodologies and experimenting with new technologies to incorporate innovative solutions into our projects. Our personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference. Youre encouraged and expected to propose things that you believe will improve the applications and frameworks youre working in. The ability to work unsupervised with minimal direction and the ability to self-start is a must. What required background will make you successful? Expert knowledge of data structures, algorithms, and modern design patterns and data layers Expert knowledge of Golang Passion to build internal solutions and own development of enterprise-wide applications Extensive knowledge of building quality APIs for internal and external products Extensive experience integrating internal and third-party services into your solution Highly proficient in modern software engineering practices for testability and readability Demonstrated ability to design the architecture of software systems to ensure they achieve functionality, performance, scalability, and maintainability requirements Degree (Bachelor's, Master's, or PhD) in Computer Engineering or Computer Science Minimum 15 years' experience in software engineering-related discipline Active TS/SCI security clearance US CITIZENSHIP REQUIRED Preferred skills: Experience providing technical leadership and guidance to junior team member and mentoring other engineers to grow in their technical abilities Highly proficient in C++ and Python for engineering and scientific applications in LINUX environments Knowledge of cloud computing platforms like Amazon Web Services (AWS) Knowledge of Javascript and web technologies such as VueJS or React Experience automating workflows across the enterprise DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP) Agile development processes and leadership Full relocation provided Remote work/telework is not available for this position. Qualifications: What required background will make you successful? Expert knowledge of data structures, algorithms, and modern design patterns and data layers Expert knowledge of Golang Passion to build internal solutions and own development of enterprise-wide applications Extensive knowledge of building quality APIs for internal and external products Extensive experience integrating internal and third-party services into your solution Highly proficient in modern software engineering practices for testability and readability Demonstrated ability to design the architecture of software systems to ensure they achieve functionality, performance, scalability, and maintainability requirements Degree (Bachelor's, Master's, or PhD) in Computer Engineering or Computer Science Minimum 15 years' experience in software engineering-related discipline Active TS/SCI security clearance US CITIZENSHIP REQUIRED Preferred skills: Experience providing technical leadership and guidance to junior team member and mentoring other engineers to grow in their technical abilities Highly proficient in C++ and Python for engineering and scientific applications in LINUX environments Knowledge of cloud computing platforms like Amazon Web Services (AWS) Knowledge of Javascript and web technologies such as VueJS or React Experience automating workflows across the enterprise DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP) Agile development processes and leadership Full relocation provided Remote work/telework is not available for this position. Why is This a Great Opportunity: We are seeking a talented, tenacious, results driven individual to work in a multi-disciplinary R&D environment with likeminded motivated electrical engineers, mathematicians, and computer scientists who are collectively responsible for creating custom geolocation and digital communications systems in support of national security defense. Salary Type : Annual Salary Salary Min : $ 160000 Salary Max : $ 260000 Currency Type : USD
09/22/2026
Full time
Job description: We are seeking a talented, tenacious, results driven individual to work in a multi-disciplinary R&D environment with likeminded motivated electrical engineers, mathematicians, and computer scientists who are collectively responsible for creating custom geolocation and digital communications systems in support of national security defense. Core responsibilities include creative problem solving, researching or inventing advanced geolocation algorithms, implementing them in efficient software, testing with real-world data, and deploying to front-line customer facilities. Our dynamic environment and diverse projects demand flexibility to learn new technologies quickly. Our personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M. Core responsibilities include: Design/architect, develop, test, deploy, and operate fully integrated software Design, build, and maintain infrastructure for modern integration between our applications and third-party services Collaborate extremely effectively with product managers, designers, other engineers, stakeholders, and vendors on projects within the team. Communicate technical ideas and work closely with other senior members of the team. You will also provide technical leadership and guidance to junior team members and mentor others to grow in their technical abilities. A key responsibility is staying up-to-date with the latest technologies, tools, and methodologies and experimenting with new technologies to incorporate innovative solutions into our projects. Our personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference. Youre encouraged and expected to propose things that you believe will improve the applications and frameworks youre working in. The ability to work unsupervised with minimal direction and the ability to self-start is a must. What required background will make you successful? Expert knowledge of data structures, algorithms, and modern design patterns and data layers Expert knowledge of Golang Passion to build internal solutions and own development of enterprise-wide applications Extensive knowledge of building quality APIs for internal and external products Extensive experience integrating internal and third-party services into your solution Highly proficient in modern software engineering practices for testability and readability Demonstrated ability to design the architecture of software systems to ensure they achieve functionality, performance, scalability, and maintainability requirements Degree (Bachelor's, Master's, or PhD) in Computer Engineering or Computer Science Minimum 15 years' experience in software engineering-related discipline Active TS/SCI security clearance US CITIZENSHIP REQUIRED Preferred skills: Experience providing technical leadership and guidance to junior team member and mentoring other engineers to grow in their technical abilities Highly proficient in C++ and Python for engineering and scientific applications in LINUX environments Knowledge of cloud computing platforms like Amazon Web Services (AWS) Knowledge of Javascript and web technologies such as VueJS or React Experience automating workflows across the enterprise DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP) Agile development processes and leadership Full relocation provided Remote work/telework is not available for this position. Qualifications: What required background will make you successful? Expert knowledge of data structures, algorithms, and modern design patterns and data layers Expert knowledge of Golang Passion to build internal solutions and own development of enterprise-wide applications Extensive knowledge of building quality APIs for internal and external products Extensive experience integrating internal and third-party services into your solution Highly proficient in modern software engineering practices for testability and readability Demonstrated ability to design the architecture of software systems to ensure they achieve functionality, performance, scalability, and maintainability requirements Degree (Bachelor's, Master's, or PhD) in Computer Engineering or Computer Science Minimum 15 years' experience in software engineering-related discipline Active TS/SCI security clearance US CITIZENSHIP REQUIRED Preferred skills: Experience providing technical leadership and guidance to junior team member and mentoring other engineers to grow in their technical abilities Highly proficient in C++ and Python for engineering and scientific applications in LINUX environments Knowledge of cloud computing platforms like Amazon Web Services (AWS) Knowledge of Javascript and web technologies such as VueJS or React Experience automating workflows across the enterprise DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP) Agile development processes and leadership Full relocation provided Remote work/telework is not available for this position. Why is This a Great Opportunity: We are seeking a talented, tenacious, results driven individual to work in a multi-disciplinary R&D environment with likeminded motivated electrical engineers, mathematicians, and computer scientists who are collectively responsible for creating custom geolocation and digital communications systems in support of national security defense. Salary Type : Annual Salary Salary Min : $ 160000 Salary Max : $ 260000 Currency Type : USD
Job Description Job Description Job Title: Physical Security Support Supervisor Location: Huntsville, AL (Hybrid: In Office Monday-Wednesday) Position Summary Rather than managing a standard remote helpdesk, this supervisor oversees the team responsible for the software, networking, and remote troubleshooting of physical security technologies (CCTV, NVR/DVRs, Alarm Panels, and Access Control). Key Responsibilities Team Leadership & Remote Management Performance Monitoring: Track and evaluate the performance of remote support analysts using time entries and key metrics. Compile monthly metrics on time entries to identify workflow bottlenecks and forecast staffing or training needs. Coaching and Development: Conduct regular one-on-one meetings and identify training gaps regarding new security hardware or software. Resource Allocation: Manage shift schedules, time-off requests, on-call rotation, and ticket routing to ensure adequate remote coverage during operating hours. Hiring and Onboarding: Interview, and develop training plan to support analysts, ensuring they understand both the technical requirements and internal standard operating procedures (SOPs). Fostering Culture: Maintain team morale, engagement, and collaboration in office and with remote staff. Operations & Service Delivery SLA Management: Ensure the team meets Service Level Agreements (SLAs) for enterprise clients, and SLO's when SLA's are not present. Process Improvement: Develop, update, and enforce SOPs for troubleshooting workflows, remote firmware upgrades, and database backups. Knowledge Base Management: Maintain an up-to-date knowledge base with troubleshooting guides, network diagrams, and manufacturer contact information. Monthly Reporting: Prepare and present monthly operational summaries highlighting team performance metrics, project milestones, and resource requirements. Incident Management: Lead the response during major outages, coordinating with clients and internal stakeholders. Quality Assurance: Periodically audit resolved tickets to ensure analysts are adhering to best practices and manufacturer guidelines. Escalation Point: Afterhours last resort On-Call point of contact for Service Desk for CCTV, Access Control, and Monitoring related issues. Cross-Functional Collaboration & Vendor Relations Client Reporting: Work with Sales Representatives to generate and present weekly or monthly service reports to key clients. Project Handoff: Work closely with the project management and service teams to seamlessly transition newly commissioned CCTV and access control systems into post-installation remote support. Required Qualifications Experience & Leadership Previous experience in a supervisory, team lead, or management role within an IT helpdesk or technical support environment. Direct, hands-on experience working with physical security technologies, specifically CCTV, NVR/DVRs, Alarm Panels, and Access Control systems. Proven track record of interviewing, onboarding, and developing training plans for technical support analysts. Operational & Soft Skills Experience writing, updating, and enforcing Standard Operating Procedures (SOPs) and maintaining technical knowledge bases. Strong incident management skills, with the ability to coordinate effectively during major outages. Excellent cross-functional communication skills, capable of collaborating with sales representatives, project managers, and enterprise clients. Ability to conduct quality assurance audits on technical tickets to ensure best practices and manufacturer guidelines are met. Preferred Qualifications Total Industry Experience: 3-5 years in IT support, technical support, or physical security systems. Leadership Experience: 1-3 years in a supervisory, team lead, or shift management role overseeing technical staff. Specialized Technical Experience: 2+ years of hands-on experience working directly with CCTV, access control, NVR/DVRs, alarm panels, and networking protocols. Why ASD? Founded in 1987, Automated Systems Design, Inc. (ASD) is a nationwide provider of design, engineering, and project management services for workplace technology. Our mission is to help our clients create, manage, and support technology-enabled spaces. We are fortunate to be in such a rapidly evolving and expanding industry; this provides ample opportunities for our business -and the people who make it all possible- to grow. Benefits Uncapped Commission 100% Paid Medical and Dental
09/22/2026
Full time
Job Description Job Description Job Title: Physical Security Support Supervisor Location: Huntsville, AL (Hybrid: In Office Monday-Wednesday) Position Summary Rather than managing a standard remote helpdesk, this supervisor oversees the team responsible for the software, networking, and remote troubleshooting of physical security technologies (CCTV, NVR/DVRs, Alarm Panels, and Access Control). Key Responsibilities Team Leadership & Remote Management Performance Monitoring: Track and evaluate the performance of remote support analysts using time entries and key metrics. Compile monthly metrics on time entries to identify workflow bottlenecks and forecast staffing or training needs. Coaching and Development: Conduct regular one-on-one meetings and identify training gaps regarding new security hardware or software. Resource Allocation: Manage shift schedules, time-off requests, on-call rotation, and ticket routing to ensure adequate remote coverage during operating hours. Hiring and Onboarding: Interview, and develop training plan to support analysts, ensuring they understand both the technical requirements and internal standard operating procedures (SOPs). Fostering Culture: Maintain team morale, engagement, and collaboration in office and with remote staff. Operations & Service Delivery SLA Management: Ensure the team meets Service Level Agreements (SLAs) for enterprise clients, and SLO's when SLA's are not present. Process Improvement: Develop, update, and enforce SOPs for troubleshooting workflows, remote firmware upgrades, and database backups. Knowledge Base Management: Maintain an up-to-date knowledge base with troubleshooting guides, network diagrams, and manufacturer contact information. Monthly Reporting: Prepare and present monthly operational summaries highlighting team performance metrics, project milestones, and resource requirements. Incident Management: Lead the response during major outages, coordinating with clients and internal stakeholders. Quality Assurance: Periodically audit resolved tickets to ensure analysts are adhering to best practices and manufacturer guidelines. Escalation Point: Afterhours last resort On-Call point of contact for Service Desk for CCTV, Access Control, and Monitoring related issues. Cross-Functional Collaboration & Vendor Relations Client Reporting: Work with Sales Representatives to generate and present weekly or monthly service reports to key clients. Project Handoff: Work closely with the project management and service teams to seamlessly transition newly commissioned CCTV and access control systems into post-installation remote support. Required Qualifications Experience & Leadership Previous experience in a supervisory, team lead, or management role within an IT helpdesk or technical support environment. Direct, hands-on experience working with physical security technologies, specifically CCTV, NVR/DVRs, Alarm Panels, and Access Control systems. Proven track record of interviewing, onboarding, and developing training plans for technical support analysts. Operational & Soft Skills Experience writing, updating, and enforcing Standard Operating Procedures (SOPs) and maintaining technical knowledge bases. Strong incident management skills, with the ability to coordinate effectively during major outages. Excellent cross-functional communication skills, capable of collaborating with sales representatives, project managers, and enterprise clients. Ability to conduct quality assurance audits on technical tickets to ensure best practices and manufacturer guidelines are met. Preferred Qualifications Total Industry Experience: 3-5 years in IT support, technical support, or physical security systems. Leadership Experience: 1-3 years in a supervisory, team lead, or shift management role overseeing technical staff. Specialized Technical Experience: 2+ years of hands-on experience working directly with CCTV, access control, NVR/DVRs, alarm panels, and networking protocols. Why ASD? Founded in 1987, Automated Systems Design, Inc. (ASD) is a nationwide provider of design, engineering, and project management services for workplace technology. Our mission is to help our clients create, manage, and support technology-enabled spaces. We are fortunate to be in such a rapidly evolving and expanding industry; this provides ample opportunities for our business -and the people who make it all possible- to grow. Benefits Uncapped Commission 100% Paid Medical and Dental
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. As part of the global controls team, you will work with highly motivated experts and innovators in the data center industry. You will be responsible for troubleshooting, project management, and maintaining the building management system (BMS) and electrical power monitoring system (EPMS). Using Amazon leadership principles, you will develop new processes and standards while innovating in the controls space. AWS Data centers have multiple components such as generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers air-cooled and water-cooled , pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. All these components have local control systems that interact with each other via open and/or proprietary communications protocols. The BMS is the primary method of control of all mechanical systems within a data center. The EPMS is the primary method of monitoring all electrical systems within a data center. Key job responsibilities • Train and assist internal customers and stakeholders with the creation, design, configuration, validation, installation, commissioning and operation of BMS and EPMS systems. • Provide technical assistance and support to operations during life cycle of the data center. • Review results and action items from the quarterly maintenances for BMS and EPMS and take actions to get them resolved. • Develop BMS & EPMS projects scope of work, schedule, budget, and level of efforts (LOE) to projects requested by customers and stakeholders. • Manage scope, schedule, finance and execution of BMS and EPMS improvement projects in AWS data centers. • Assist in procurement related activities including request for quotation/proposals, responding to request for information, review of vendors proposal and issuance of purchase orders. • Participate in AWS global on-call schedule to provide immediate BMS and EPMS technical support to in-service data centers. • Attend project related meetings, coordinate with project leaders and regularly report status to Controls and stakeholder's management. • Support Controls projects related commissioning activities in the data centers. • Review, implement, troubleshoot and iterate on the controls sequence of operation (SOO) and provide necessary feedback to the design team. • Develop and modify controls logic programming and graphical user interfaces. • Manage multiple stakeholder deliverables, requirements and navigate challenging situations. • Financially manage BMS and EPMS service contracts. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor's work to ensure compliance with the scope, design, SOO and applicable local codes. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 5+ years of industrial controls and automation experience - 4+ years of general contractor and vendor management work (request for proposals, bidding, change orders, quality control, RFI/submittal tracking) associated with construction and project execution experience - Bachelor's degree in Mechanical Engineering, Electrical Engineering, or an equivalent engineering science plus 5+ years of relevant controls experience, OR 10+ years of relevant controls experience in lieu of a degree. PREFERRED QUALIFICATIONS - Master's degree in mechanical engineering, electrical engineering, material science, physics or equivalent, or MS degree - Experience designing, configuring, programming, installing, troubleshooting or servicing HVAC Controls or Electrical SCADA systems application specific controllers, software and networks. - Experiencing using common industrial communication protocols (MQTT, BACnet and/or MODBUS). - Demonstrated understanding of engineering documentation, electrical and mechanical diagrams, and standard operating procedures. - Ability to manage multiple stakeholder deliverables, requirements, and navigate difficult situations. - Experience designing data centers or critical MEP infrastructure - Registered as a Professional Engineer (PE), or certified Project Management Professional (PMP). Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Herndon - 111 100.00 USD annually
09/22/2026
Full time
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. As part of the global controls team, you will work with highly motivated experts and innovators in the data center industry. You will be responsible for troubleshooting, project management, and maintaining the building management system (BMS) and electrical power monitoring system (EPMS). Using Amazon leadership principles, you will develop new processes and standards while innovating in the controls space. AWS Data centers have multiple components such as generators, uninterruptible power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers air-cooled and water-cooled , pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. All these components have local control systems that interact with each other via open and/or proprietary communications protocols. The BMS is the primary method of control of all mechanical systems within a data center. The EPMS is the primary method of monitoring all electrical systems within a data center. Key job responsibilities • Train and assist internal customers and stakeholders with the creation, design, configuration, validation, installation, commissioning and operation of BMS and EPMS systems. • Provide technical assistance and support to operations during life cycle of the data center. • Review results and action items from the quarterly maintenances for BMS and EPMS and take actions to get them resolved. • Develop BMS & EPMS projects scope of work, schedule, budget, and level of efforts (LOE) to projects requested by customers and stakeholders. • Manage scope, schedule, finance and execution of BMS and EPMS improvement projects in AWS data centers. • Assist in procurement related activities including request for quotation/proposals, responding to request for information, review of vendors proposal and issuance of purchase orders. • Participate in AWS global on-call schedule to provide immediate BMS and EPMS technical support to in-service data centers. • Attend project related meetings, coordinate with project leaders and regularly report status to Controls and stakeholder's management. • Support Controls projects related commissioning activities in the data centers. • Review, implement, troubleshoot and iterate on the controls sequence of operation (SOO) and provide necessary feedback to the design team. • Develop and modify controls logic programming and graphical user interfaces. • Manage multiple stakeholder deliverables, requirements and navigate challenging situations. • Financially manage BMS and EPMS service contracts. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor's work to ensure compliance with the scope, design, SOO and applicable local codes. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - 5+ years of industrial controls and automation experience - 4+ years of general contractor and vendor management work (request for proposals, bidding, change orders, quality control, RFI/submittal tracking) associated with construction and project execution experience - Bachelor's degree in Mechanical Engineering, Electrical Engineering, or an equivalent engineering science plus 5+ years of relevant controls experience, OR 10+ years of relevant controls experience in lieu of a degree. PREFERRED QUALIFICATIONS - Master's degree in mechanical engineering, electrical engineering, material science, physics or equivalent, or MS degree - Experience designing, configuring, programming, installing, troubleshooting or servicing HVAC Controls or Electrical SCADA systems application specific controllers, software and networks. - Experiencing using common industrial communication protocols (MQTT, BACnet and/or MODBUS). - Demonstrated understanding of engineering documentation, electrical and mechanical diagrams, and standard operating procedures. - Ability to manage multiple stakeholder deliverables, requirements, and navigate difficult situations. - Experience designing data centers or critical MEP infrastructure - Registered as a Professional Engineer (PE), or certified Project Management Professional (PMP). Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Herndon - 111 100.00 USD annually
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. As part of the global controls team, you will work with highly motivated experts and innovators in the data center industry. You will be responsible for troubleshooting, project management, and maintaining the building management system (BMS) and electrical power monitoring system (EPMS). Using Amazon leadership principles, you will develop new processes and standards while innovating in the controls space. AWS Data centers have multiple components such as generators, uninterruptable power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers air-cooled and water-cooled , pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. All these components have local control systems that interact with each other via open and/or proprietary communications protocols. The BMS is the primary method of control of all mechanical systems within a data center. The EPMS is the primary method of monitoring all electrical systems within a data center. Key job responsibilities As a Data Center Controls Engineer you will: • Troubleshoot and perform Root Cause Analysis or Corrective Action for BMS and EPMS related issues in AWS data centers. • Train and assist internal customers and stakeholders with the creation, design, configuration, validation, installation, commissioning and operation of BMS and EPMS systems. • Provide technical assistance and support to operations during life cycle of the data center. • Review results and action items from the quarterly maintenances for BMS and EPMS and take actions to get them resolved. • Develop BMS & EPMS projects scope of work, schedule, budget, and level of efforts (LOE) to projects requested by customers and stakeholders. • Manage scope, schedule, finance and execution of BMS and EPMS improvement projects in AWS data centers. • Assist in procurement related activities including request for quotation/proposals, responding to request for information, review of vendors proposal and issuance of purchase orders. • Participate in AWS global on-call schedule to provide immediate BMS and EPMS technical support to in-service data centers. • Attend project related meetings, coordinate with project leaders and regularly report status to Controls and stakeholders management. • Support Controls projects related commissioning activities in the data centers. • Review, implement, troubleshoot and iterate on the controls sequence of operation (SOO) and provide necessary feedback to the design team. • Develop and modify controls logic programming and graphical user interfaces. • Manage multiple stakeholder deliverables, requirements and navigate challenging situations. • Financially manage BMS and EPMS service contracts. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor's work to ensure compliance with the scope, design, SOO and applicable local codes. About the team Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Manassas - 111 100.00 USD annually
09/22/2026
Full time
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. As part of the global controls team, you will work with highly motivated experts and innovators in the data center industry. You will be responsible for troubleshooting, project management, and maintaining the building management system (BMS) and electrical power monitoring system (EPMS). Using Amazon leadership principles, you will develop new processes and standards while innovating in the controls space. AWS Data centers have multiple components such as generators, uninterruptable power sources, diesel generators, electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, chillers air-cooled and water-cooled , pumps, cooling towers, heat exchangers, CRAHs, air economizers, etc. All these components have local control systems that interact with each other via open and/or proprietary communications protocols. The BMS is the primary method of control of all mechanical systems within a data center. The EPMS is the primary method of monitoring all electrical systems within a data center. Key job responsibilities As a Data Center Controls Engineer you will: • Troubleshoot and perform Root Cause Analysis or Corrective Action for BMS and EPMS related issues in AWS data centers. • Train and assist internal customers and stakeholders with the creation, design, configuration, validation, installation, commissioning and operation of BMS and EPMS systems. • Provide technical assistance and support to operations during life cycle of the data center. • Review results and action items from the quarterly maintenances for BMS and EPMS and take actions to get them resolved. • Develop BMS & EPMS projects scope of work, schedule, budget, and level of efforts (LOE) to projects requested by customers and stakeholders. • Manage scope, schedule, finance and execution of BMS and EPMS improvement projects in AWS data centers. • Assist in procurement related activities including request for quotation/proposals, responding to request for information, review of vendors proposal and issuance of purchase orders. • Participate in AWS global on-call schedule to provide immediate BMS and EPMS technical support to in-service data centers. • Attend project related meetings, coordinate with project leaders and regularly report status to Controls and stakeholders management. • Support Controls projects related commissioning activities in the data centers. • Review, implement, troubleshoot and iterate on the controls sequence of operation (SOO) and provide necessary feedback to the design team. • Develop and modify controls logic programming and graphical user interfaces. • Manage multiple stakeholder deliverables, requirements and navigate challenging situations. • Financially manage BMS and EPMS service contracts. • Frequently visit (locally) assigned in-operation data centers to troubleshoot, meet customers, supervise vendor's work to ensure compliance with the scope, design, SOO and applicable local codes. About the team Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Manassas - 111 100.00 USD annually
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Strategic Permit Manager role - based in Arlington/Herndon VA, Seattle WA, or Austin TX - will be responsible for coordinating the planning, execution and evaluation of all critical government (aka Authority Having Jurisdiction (AHJ approvals required for land development related to data centers and essential supportive infrastructure. Specifically, the Strategic Permit Manager will support all development permitting processes for their assigned projects and will be responsible for working with partner teams (e.g. transaction, economic development, engineering, construction, utility, and environment teams) to develop, coordinate and negotiate a permit strategy, ensure that strategy is being executed effectively, and identify and mitigate risks associated with AHJ approval processes. Accordingly, the Strategic Permit Manager will crucially be a primary owner of direct AHJ engagement. A successful candidate in this role will have experience with real estate development regulations and AHJ/government engagement. Candidate should have a proven track record of delivering multiple, high-priority projects with tight timelines that required strong project management and cross-functional coordination with internal partner teams and outside consultants and counsel. Candidate must be able work in assigned office up to five days each week, with exception of work travel 25-50% of the time. Key job responsibilities • Identify all government approvals required to construct data center infrastructure. • Support entitlements approval process. • Coordinate internal and external project development teams to develop, negotiate and execute a permitting plan, ensuring all internal and external stakeholders are performing required actions at the appropriate time. • Own key relationships with AHJs and other key external stakeholders to act as a single point of contact for all strategic AHJ approval negotiations and escalations. • Identify, assess, mitigate and communicate risks to the permitting strategy to internal stakeholders and leadership. • Engage and manage the work of entitlement and permitting scheduling consultants and specialists. • Track real-time permit delivery metrics and complete after-action reviews to identify and solution opportunities for process improvement. • 25-50% travel A day in the life - Coordination communications (emails, calls, messages) with internal teams and consultants to plan and execute projects. - Analyze and develop technical AHJ approval materials. - Meet virtually and in-person with AHJ staff to coordinate requirements and approval strategy. - Develop and maintain AHJ approval schedules. - Travel to in-person internal and external meetings and workshops. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Diverse Experiences AWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Why AWS? Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Inclusive Team Culture AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do. Mentorship & Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree or above - • 2+ years of entitlement and/or site development permitting experience - • 2+ years experience managing programs across cross functional teams, building processes and coordinating development schedules - 5+ years of project management experience in real estate development - 5+ years of working directly with government officials and regulatory bodies experience PREFERRED QUALIFICATIONS - Master's degree - Background in Urban Planning, Land Use Law, or Community Development - AICP or PMP certifications or experience Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, TX, Austin - 92 000.00 USD annually USA, VA, Arlington - 92 000.00 USD annually USA, WA, Seattle - 92 000.00 USD annually
09/22/2026
Full time
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. The Strategic Permit Manager role - based in Arlington/Herndon VA, Seattle WA, or Austin TX - will be responsible for coordinating the planning, execution and evaluation of all critical government (aka Authority Having Jurisdiction (AHJ approvals required for land development related to data centers and essential supportive infrastructure. Specifically, the Strategic Permit Manager will support all development permitting processes for their assigned projects and will be responsible for working with partner teams (e.g. transaction, economic development, engineering, construction, utility, and environment teams) to develop, coordinate and negotiate a permit strategy, ensure that strategy is being executed effectively, and identify and mitigate risks associated with AHJ approval processes. Accordingly, the Strategic Permit Manager will crucially be a primary owner of direct AHJ engagement. A successful candidate in this role will have experience with real estate development regulations and AHJ/government engagement. Candidate should have a proven track record of delivering multiple, high-priority projects with tight timelines that required strong project management and cross-functional coordination with internal partner teams and outside consultants and counsel. Candidate must be able work in assigned office up to five days each week, with exception of work travel 25-50% of the time. Key job responsibilities • Identify all government approvals required to construct data center infrastructure. • Support entitlements approval process. • Coordinate internal and external project development teams to develop, negotiate and execute a permitting plan, ensuring all internal and external stakeholders are performing required actions at the appropriate time. • Own key relationships with AHJs and other key external stakeholders to act as a single point of contact for all strategic AHJ approval negotiations and escalations. • Identify, assess, mitigate and communicate risks to the permitting strategy to internal stakeholders and leadership. • Engage and manage the work of entitlement and permitting scheduling consultants and specialists. • Track real-time permit delivery metrics and complete after-action reviews to identify and solution opportunities for process improvement. • 25-50% travel A day in the life - Coordination communications (emails, calls, messages) with internal teams and consultants to plan and execute projects. - Analyze and develop technical AHJ approval materials. - Meet virtually and in-person with AHJ staff to coordinate requirements and approval strategy. - Develop and maintain AHJ approval schedules. - Travel to in-person internal and external meetings and workshops. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Diverse Experiences AWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Why AWS? Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Inclusive Team Culture AWS values curiosity and connection. Our employee-led and company-sponsored affinity groups promote inclusion and empower our people to take pride in what makes us unique. Our inclusion events foster stronger, more collaborative teams. Our continual innovation is fueled by the bold ideas, fresh perspectives, and passionate voices our teams bring to everything we do. Mentorship & Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree or above - • 2+ years of entitlement and/or site development permitting experience - • 2+ years experience managing programs across cross functional teams, building processes and coordinating development schedules - 5+ years of project management experience in real estate development - 5+ years of working directly with government officials and regulatory bodies experience PREFERRED QUALIFICATIONS - Master's degree - Background in Urban Planning, Land Use Law, or Community Development - AICP or PMP certifications or experience Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, TX, Austin - 92 000.00 USD annually USA, VA, Arlington - 92 000.00 USD annually USA, WA, Seattle - 92 000.00 USD annually
Job DescriptionJob Description POSITION IS HYBRID IN THE GREATER SAN DIEGO COUNTY AREA OR VENTURA COUNTY, CA Job Summary The Program Manager is responsible for supporting and managing complex program teams working on large programs. Must interface across the SME's and customers in an environment where the workforce is skilled, valued and specialized in the applications. Serves as the key management link across the programs but with the ability to navigate and understand technical project concepts and challenges. Acts as the interface from VSolvit management to the customer at a local level as required. Oversees staff that handles day to day operations. Provides capture management and support for follow on and new opportunities related to existing programs. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities Responsible for overall program management of assigned projects and programs. Lead work accomplishment across multiple programs and multiple SMEs. Identifies all possible challenges and institutes corrective actions to address them. Defines and institutes strategic and operational goals to achieve desired performance. Manages project team(s) to formulate and track task plans and deliverables. Ensures conformance with program task schedules and costs. Identifies, analyzes and defines project/program requirements and scope. Oversees assigned projects and programs to ensure standards and processes are adhered to, and process improvement opportunities are executed. Ensures CMMI compliance requirements are implemented and adhered to. Communicates effectively across a wide variety of technical and non-technical audiences. Exercises delegated authority for planning, directing, coordinating, administering, and executing many routine and complex projects/programs. Establishes and maintains customer relationships and acts as technical support liaison for all Customers. Develop intimacy with customers and business partners; generates and maintains revenue of business lines Oversees project financials and contract deliverables. Basic Qualifications Bachelor's degree and 10+ years' experience Demonstrated 8+ years of technical software development supervisory experience Demonstrated 4+ years' Project Management supporting DoD or other federal technology programs Demonstrated written and verbal communication skills United States Citizenship Required Must have an Active DoD Secret clearance OR ability to reactive a clearance held within the past 24 months Preferred Qualifications PMP or similar project management related certification Demonstrated 10+ years of related technical and supervisory experience Demonstrated 8+ years' Project Management supporting DoD or other federal technology initiatives Demonstrated experience in management, and multi-task / multi-function projects Demonstrated working knowledge of Department of Defense and/or federal procurement practices. Demonstrated team builder with strong people skills, experienced in creating and maintaining cohesive teams Experience in preparing reports and presenting briefings to customer and company executives Exceptional analytical and problem-solving skills DoD with US Navy experience is a plus Experience with managing programs containing both front and back end development and multiple teams Demonstrated knowledge of CMMI Process analysis and process improvement experience Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
09/22/2026
Full time
Job DescriptionJob Description POSITION IS HYBRID IN THE GREATER SAN DIEGO COUNTY AREA OR VENTURA COUNTY, CA Job Summary The Program Manager is responsible for supporting and managing complex program teams working on large programs. Must interface across the SME's and customers in an environment where the workforce is skilled, valued and specialized in the applications. Serves as the key management link across the programs but with the ability to navigate and understand technical project concepts and challenges. Acts as the interface from VSolvit management to the customer at a local level as required. Oversees staff that handles day to day operations. Provides capture management and support for follow on and new opportunities related to existing programs. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities Responsible for overall program management of assigned projects and programs. Lead work accomplishment across multiple programs and multiple SMEs. Identifies all possible challenges and institutes corrective actions to address them. Defines and institutes strategic and operational goals to achieve desired performance. Manages project team(s) to formulate and track task plans and deliverables. Ensures conformance with program task schedules and costs. Identifies, analyzes and defines project/program requirements and scope. Oversees assigned projects and programs to ensure standards and processes are adhered to, and process improvement opportunities are executed. Ensures CMMI compliance requirements are implemented and adhered to. Communicates effectively across a wide variety of technical and non-technical audiences. Exercises delegated authority for planning, directing, coordinating, administering, and executing many routine and complex projects/programs. Establishes and maintains customer relationships and acts as technical support liaison for all Customers. Develop intimacy with customers and business partners; generates and maintains revenue of business lines Oversees project financials and contract deliverables. Basic Qualifications Bachelor's degree and 10+ years' experience Demonstrated 8+ years of technical software development supervisory experience Demonstrated 4+ years' Project Management supporting DoD or other federal technology programs Demonstrated written and verbal communication skills United States Citizenship Required Must have an Active DoD Secret clearance OR ability to reactive a clearance held within the past 24 months Preferred Qualifications PMP or similar project management related certification Demonstrated 10+ years of related technical and supervisory experience Demonstrated 8+ years' Project Management supporting DoD or other federal technology initiatives Demonstrated experience in management, and multi-task / multi-function projects Demonstrated working knowledge of Department of Defense and/or federal procurement practices. Demonstrated team builder with strong people skills, experienced in creating and maintaining cohesive teams Experience in preparing reports and presenting briefings to customer and company executives Exceptional analytical and problem-solving skills DoD with US Navy experience is a plus Experience with managing programs containing both front and back end development and multiple teams Demonstrated knowledge of CMMI Process analysis and process improvement experience Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
Job DescriptionJob Description Program Manager - Simulator Deployment and Sustainment Job Description Position Summary The Program Manager is the senior frontline management position responsible for leading a team of Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs) for a multi-year program delivering training simulators to a national footprint of US Government facilities. This role focuses on the overall program health and performance ensuring the firm-fixed price program is delivered on time, within budget, and to customer satisfaction. This program carries significant contract value, hardware and software procurement, configuration-managed baselines, and milestone deadlines with direct schedule, financial, and liquidated-damages accountability. While the Program Manager role primary focus is to lead a strategically important program, there is also emphasis on team leadership, portfolio oversight, resource allocation, and alignment with organizational objectives. The Program Manager serves as a key link between program execution and executive leadership, and as a senior point of contact for prime contractors, Government stakeholders, and end customers on a high-consequence program. Responsibilities Direct Program Management • Directly manage strategically important program with national multi-site rollouts under firm-fixed-price terms. • Provide hands-on program leadership during critical phases, installations, test events, or resource constraints. • Own scope, schedule, cost, and quality on assigned programs and manage milestone deadlines where slips carry contractual, financial, and liquidated-damages exposure. Customer & Stakeholder Management • Serves as the senior customer-facing point of contact; running program reviews, IPRs, and customer briefings • Manage customer expectations and satisfaction through installation and site activation. • Handle change requests, exceptions, and scope conversations with the prime and the Government. • Build long-term customer relationships that position follow-on work and option-year exercise. • Align project/program priorities with organizational strategy and objectives. • Communicate program status, risks, and strategic issues to executive leadership. • Serve as an escalation point for critical customer issues and program decisions. • Interface with prime contractors and Government stakeholders, managing flow-down obligations, submittals, approvals, and deliverable commitments. Program Oversight & Project Health • Monitor the health, status, and performance within the program, including multi-site national deployments and long-duration programs with option years. • Review project schedules, budgets, and risk profiles to identify issues requiring intervention. • Ensure consistent application of project management, systems engineering, test and evaluation, and configuration management (CCB-governed baseline) methodologies and standards. Cost, Schedule & Procurement Management • Oversee cost and schedule baselines, applying earned value and other performance measures to keep firm-fixed-price program within budget. • Guide management of Other Direct Costs, including procurement, vendor coordination, and supply-chain risk. • Ensure integrated master schedule is maintained and that critical-path risks to installation, testing, and site activation are identified and mitigated early. • Oversee contract deliverables required for the prime contractor to meet its obligations to the customer. Resource & Capacity Management • Allocate project management resources based on project priorities to identify capacity constraints. • Coordinate with cross-functional teams (development, systems engineering, test and evaluation, installation, and operations and maintenance) to ensure adequate staffing and support for project delivery. Team Leadership & Development • Directly manage and supervise Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs)Conduct regular one-on-ones, performance reviews, and career development discussions with direct reports. • Provide coaching, mentorship, and guidance on project management best practices. • Identify training needs and support professional development of team members. • Foster a collaborative team environment and promote knowledge sharing across the organization. • Participate in hiring, onboarding, and resource planning. Required Qualifications • Bachelor's degree in Computer Science, Engineering, Aviation, Business, or related field. • 15+ years of experience in program or project management, including large-scale, multi-site technical systems. • 5+ years of experience in a management or team leadership capacity, leading project managers or technical leads. • Project Management Professional (PMP) certification. • Demonstrated experience delivering firm-fixed-price programs of significant value (multi-million dollar) with multi-year periods of performance and option years. • Experience as a subcontractor program manager interfacing with a prime contractor and a Government end customer, including managing flow-down requirements and deliverables. • Strong understanding of systems engineering, test and evaluation, and configuration management / controlled baselines (CCB) processes. • Experience with cost and schedule control, including integrated master scheduling. • Experience managing milestone-driven contracts, including risk and issue management under schedule, financial, and liquidated-damages accountability. • Experience with project management and work management tools (e.g., MS Project, JIRA), and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Visio). • Strong leadership, coaching, interpersonal, and written and verbal communication skills. • Must be able to obtain and maintain a Position of Public Trust Clearance. • Must be able to comply with U.S. trade and export-control requirements (ITAR, EAR, OFAC, FTR). • Must be a U.S. citizen. Preferred Qualifications • MBA or Master's degree in engineering, management, or a related field. • Program Management Professional (PgMP) certification. • Agile or Scrum certification (CSM, PSM, SAFe). • Direct experience on U.S. Government programs, including FAA or National Airspace System (NAS) programs. Working knowledge of ATC concepts, airfield/tower operations, and simulation/training environments. • Aviation certifications or background (e.g., FAA Control Tower Operator, Pilot License, or equivalent controller/aviation experience). • Experience managing hardware/software procurement and supply-chain logistics on large-value programs. • Active or recently held Public Trust or higher clearance. Travel Requirements Domestic and international travel may be required, including travel to customer and installation sites across a national footprint to support deployments, test events, site activations, and program reviews. Work Location Germantown, MD
09/22/2026
Full time
Job DescriptionJob Description Program Manager - Simulator Deployment and Sustainment Job Description Position Summary The Program Manager is the senior frontline management position responsible for leading a team of Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs) for a multi-year program delivering training simulators to a national footprint of US Government facilities. This role focuses on the overall program health and performance ensuring the firm-fixed price program is delivered on time, within budget, and to customer satisfaction. This program carries significant contract value, hardware and software procurement, configuration-managed baselines, and milestone deadlines with direct schedule, financial, and liquidated-damages accountability. While the Program Manager role primary focus is to lead a strategically important program, there is also emphasis on team leadership, portfolio oversight, resource allocation, and alignment with organizational objectives. The Program Manager serves as a key link between program execution and executive leadership, and as a senior point of contact for prime contractors, Government stakeholders, and end customers on a high-consequence program. Responsibilities Direct Program Management • Directly manage strategically important program with national multi-site rollouts under firm-fixed-price terms. • Provide hands-on program leadership during critical phases, installations, test events, or resource constraints. • Own scope, schedule, cost, and quality on assigned programs and manage milestone deadlines where slips carry contractual, financial, and liquidated-damages exposure. Customer & Stakeholder Management • Serves as the senior customer-facing point of contact; running program reviews, IPRs, and customer briefings • Manage customer expectations and satisfaction through installation and site activation. • Handle change requests, exceptions, and scope conversations with the prime and the Government. • Build long-term customer relationships that position follow-on work and option-year exercise. • Align project/program priorities with organizational strategy and objectives. • Communicate program status, risks, and strategic issues to executive leadership. • Serve as an escalation point for critical customer issues and program decisions. • Interface with prime contractors and Government stakeholders, managing flow-down obligations, submittals, approvals, and deliverable commitments. Program Oversight & Project Health • Monitor the health, status, and performance within the program, including multi-site national deployments and long-duration programs with option years. • Review project schedules, budgets, and risk profiles to identify issues requiring intervention. • Ensure consistent application of project management, systems engineering, test and evaluation, and configuration management (CCB-governed baseline) methodologies and standards. Cost, Schedule & Procurement Management • Oversee cost and schedule baselines, applying earned value and other performance measures to keep firm-fixed-price program within budget. • Guide management of Other Direct Costs, including procurement, vendor coordination, and supply-chain risk. • Ensure integrated master schedule is maintained and that critical-path risks to installation, testing, and site activation are identified and mitigated early. • Oversee contract deliverables required for the prime contractor to meet its obligations to the customer. Resource & Capacity Management • Allocate project management resources based on project priorities to identify capacity constraints. • Coordinate with cross-functional teams (development, systems engineering, test and evaluation, installation, and operations and maintenance) to ensure adequate staffing and support for project delivery. Team Leadership & Development • Directly manage and supervise Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs)Conduct regular one-on-ones, performance reviews, and career development discussions with direct reports. • Provide coaching, mentorship, and guidance on project management best practices. • Identify training needs and support professional development of team members. • Foster a collaborative team environment and promote knowledge sharing across the organization. • Participate in hiring, onboarding, and resource planning. Required Qualifications • Bachelor's degree in Computer Science, Engineering, Aviation, Business, or related field. • 15+ years of experience in program or project management, including large-scale, multi-site technical systems. • 5+ years of experience in a management or team leadership capacity, leading project managers or technical leads. • Project Management Professional (PMP) certification. • Demonstrated experience delivering firm-fixed-price programs of significant value (multi-million dollar) with multi-year periods of performance and option years. • Experience as a subcontractor program manager interfacing with a prime contractor and a Government end customer, including managing flow-down requirements and deliverables. • Strong understanding of systems engineering, test and evaluation, and configuration management / controlled baselines (CCB) processes. • Experience with cost and schedule control, including integrated master scheduling. • Experience managing milestone-driven contracts, including risk and issue management under schedule, financial, and liquidated-damages accountability. • Experience with project management and work management tools (e.g., MS Project, JIRA), and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Visio). • Strong leadership, coaching, interpersonal, and written and verbal communication skills. • Must be able to obtain and maintain a Position of Public Trust Clearance. • Must be able to comply with U.S. trade and export-control requirements (ITAR, EAR, OFAC, FTR). • Must be a U.S. citizen. Preferred Qualifications • MBA or Master's degree in engineering, management, or a related field. • Program Management Professional (PgMP) certification. • Agile or Scrum certification (CSM, PSM, SAFe). • Direct experience on U.S. Government programs, including FAA or National Airspace System (NAS) programs. Working knowledge of ATC concepts, airfield/tower operations, and simulation/training environments. • Aviation certifications or background (e.g., FAA Control Tower Operator, Pilot License, or equivalent controller/aviation experience). • Experience managing hardware/software procurement and supply-chain logistics on large-value programs. • Active or recently held Public Trust or higher clearance. Travel Requirements Domestic and international travel may be required, including travel to customer and installation sites across a national footprint to support deployments, test events, site activations, and program reviews. Work Location Germantown, MD
Job DescriptionJob Description Program Manager - Simulator Deployment and Sustainment Job Description Position Summary The Program Manager is the senior frontline management position responsible for leading a team of Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs) for a multi-year program delivering training simulators to a national footprint of US Government facilities. This role focuses on the overall program health and performance ensuring the firm-fixed price program is delivered on time, within budget, and to customer satisfaction. This program carries significant contract value, hardware and software procurement, configuration-managed baselines, and milestone deadlines with direct schedule, financial, and liquidated-damages accountability. While the Program Manager role primary focus is to lead a strategically important program, there is also emphasis on team leadership, portfolio oversight, resource allocation, and alignment with organizational objectives. The Program Manager serves as a key link between program execution and executive leadership, and as a senior point of contact for prime contractors, Government stakeholders, and end customers on a high-consequence program. Responsibilities Direct Program Management • Directly manage strategically important program with national multi-site rollouts under firm-fixed-price terms. • Provide hands-on program leadership during critical phases, installations, test events, or resource constraints. • Own scope, schedule, cost, and quality on assigned programs and manage milestone deadlines where slips carry contractual, financial, and liquidated-damages exposure. Customer & Stakeholder Management • Serves as the senior customer-facing point of contact; running program reviews, IPRs, and customer briefings • Manage customer expectations and satisfaction through installation and site activation. • Handle change requests, exceptions, and scope conversations with the prime and the Government. • Build long-term customer relationships that position follow-on work and option-year exercise. • Align project/program priorities with organizational strategy and objectives. • Communicate program status, risks, and strategic issues to executive leadership. • Serve as an escalation point for critical customer issues and program decisions. • Interface with prime contractors and Government stakeholders, managing flow-down obligations, submittals, approvals, and deliverable commitments. Program Oversight & Project Health • Monitor the health, status, and performance within the program, including multi-site national deployments and long-duration programs with option years. • Review project schedules, budgets, and risk profiles to identify issues requiring intervention. • Ensure consistent application of project management, systems engineering, test and evaluation, and configuration management (CCB-governed baseline) methodologies and standards. Cost, Schedule & Procurement Management • Oversee cost and schedule baselines, applying earned value and other performance measures to keep firm-fixed-price program within budget. • Guide management of Other Direct Costs, including procurement, vendor coordination, and supply-chain risk. • Ensure integrated master schedule is maintained and that critical-path risks to installation, testing, and site activation are identified and mitigated early. • Oversee contract deliverables required for the prime contractor to meet its obligations to the customer. Resource & Capacity Management • Allocate project management resources based on project priorities to identify capacity constraints. • Coordinate with cross-functional teams (development, systems engineering, test and evaluation, installation, and operations and maintenance) to ensure adequate staffing and support for project delivery. Team Leadership & Development • Directly manage and supervise Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs)Conduct regular one-on-ones, performance reviews, and career development discussions with direct reports. • Provide coaching, mentorship, and guidance on project management best practices. • Identify training needs and support professional development of team members. • Foster a collaborative team environment and promote knowledge sharing across the organization. • Participate in hiring, onboarding, and resource planning. Required Qualifications • Bachelor's degree in Computer Science, Engineering, Aviation, Business, or related field. • 15+ years of experience in program or project management, including large-scale, multi-site technical systems. • 5+ years of experience in a management or team leadership capacity, leading project managers or technical leads. • Project Management Professional (PMP) certification. • Demonstrated experience delivering firm-fixed-price programs of significant value (multi-million dollar) with multi-year periods of performance and option years. • Experience as a subcontractor program manager interfacing with a prime contractor and a Government end customer, including managing flow-down requirements and deliverables. • Strong understanding of systems engineering, test and evaluation, and configuration management / controlled baselines (CCB) processes. • Experience with cost and schedule control, including integrated master scheduling. • Experience managing milestone-driven contracts, including risk and issue management under schedule, financial, and liquidated-damages accountability. • Experience with project management and work management tools (e.g., MS Project, JIRA), and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Visio). • Strong leadership, coaching, interpersonal, and written and verbal communication skills. • Must be able to obtain and maintain a Position of Public Trust Clearance. • Must be able to comply with U.S. trade and export-control requirements (ITAR, EAR, OFAC, FTR). • Must be a U.S. citizen. Preferred Qualifications • MBA or Master's degree in engineering, management, or a related field. • Program Management Professional (PgMP) certification. • Agile or Scrum certification (CSM, PSM, SAFe). • Direct experience on U.S. Government programs, including FAA or National Airspace System (NAS) programs. Working knowledge of ATC concepts, airfield/tower operations, and simulation/training environments. • Aviation certifications or background (e.g., FAA Control Tower Operator, Pilot License, or equivalent controller/aviation experience). • Experience managing hardware/software procurement and supply-chain logistics on large-value programs. • Active or recently held Public Trust or higher clearance. Travel Requirements Domestic and international travel may be required, including travel to customer and installation sites across a national footprint to support deployments, test events, site activations, and program reviews. Work Location Germantown, MD
09/22/2026
Full time
Job DescriptionJob Description Program Manager - Simulator Deployment and Sustainment Job Description Position Summary The Program Manager is the senior frontline management position responsible for leading a team of Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs) for a multi-year program delivering training simulators to a national footprint of US Government facilities. This role focuses on the overall program health and performance ensuring the firm-fixed price program is delivered on time, within budget, and to customer satisfaction. This program carries significant contract value, hardware and software procurement, configuration-managed baselines, and milestone deadlines with direct schedule, financial, and liquidated-damages accountability. While the Program Manager role primary focus is to lead a strategically important program, there is also emphasis on team leadership, portfolio oversight, resource allocation, and alignment with organizational objectives. The Program Manager serves as a key link between program execution and executive leadership, and as a senior point of contact for prime contractors, Government stakeholders, and end customers on a high-consequence program. Responsibilities Direct Program Management • Directly manage strategically important program with national multi-site rollouts under firm-fixed-price terms. • Provide hands-on program leadership during critical phases, installations, test events, or resource constraints. • Own scope, schedule, cost, and quality on assigned programs and manage milestone deadlines where slips carry contractual, financial, and liquidated-damages exposure. Customer & Stakeholder Management • Serves as the senior customer-facing point of contact; running program reviews, IPRs, and customer briefings • Manage customer expectations and satisfaction through installation and site activation. • Handle change requests, exceptions, and scope conversations with the prime and the Government. • Build long-term customer relationships that position follow-on work and option-year exercise. • Align project/program priorities with organizational strategy and objectives. • Communicate program status, risks, and strategic issues to executive leadership. • Serve as an escalation point for critical customer issues and program decisions. • Interface with prime contractors and Government stakeholders, managing flow-down obligations, submittals, approvals, and deliverable commitments. Program Oversight & Project Health • Monitor the health, status, and performance within the program, including multi-site national deployments and long-duration programs with option years. • Review project schedules, budgets, and risk profiles to identify issues requiring intervention. • Ensure consistent application of project management, systems engineering, test and evaluation, and configuration management (CCB-governed baseline) methodologies and standards. Cost, Schedule & Procurement Management • Oversee cost and schedule baselines, applying earned value and other performance measures to keep firm-fixed-price program within budget. • Guide management of Other Direct Costs, including procurement, vendor coordination, and supply-chain risk. • Ensure integrated master schedule is maintained and that critical-path risks to installation, testing, and site activation are identified and mitigated early. • Oversee contract deliverables required for the prime contractor to meet its obligations to the customer. Resource & Capacity Management • Allocate project management resources based on project priorities to identify capacity constraints. • Coordinate with cross-functional teams (development, systems engineering, test and evaluation, installation, and operations and maintenance) to ensure adequate staffing and support for project delivery. Team Leadership & Development • Directly manage and supervise Deputy Program Managers, Product Support Specialists and Subject Matter Experts (SMEs)Conduct regular one-on-ones, performance reviews, and career development discussions with direct reports. • Provide coaching, mentorship, and guidance on project management best practices. • Identify training needs and support professional development of team members. • Foster a collaborative team environment and promote knowledge sharing across the organization. • Participate in hiring, onboarding, and resource planning. Required Qualifications • Bachelor's degree in Computer Science, Engineering, Aviation, Business, or related field. • 15+ years of experience in program or project management, including large-scale, multi-site technical systems. • 5+ years of experience in a management or team leadership capacity, leading project managers or technical leads. • Project Management Professional (PMP) certification. • Demonstrated experience delivering firm-fixed-price programs of significant value (multi-million dollar) with multi-year periods of performance and option years. • Experience as a subcontractor program manager interfacing with a prime contractor and a Government end customer, including managing flow-down requirements and deliverables. • Strong understanding of systems engineering, test and evaluation, and configuration management / controlled baselines (CCB) processes. • Experience with cost and schedule control, including integrated master scheduling. • Experience managing milestone-driven contracts, including risk and issue management under schedule, financial, and liquidated-damages accountability. • Experience with project management and work management tools (e.g., MS Project, JIRA), and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Visio). • Strong leadership, coaching, interpersonal, and written and verbal communication skills. • Must be able to obtain and maintain a Position of Public Trust Clearance. • Must be able to comply with U.S. trade and export-control requirements (ITAR, EAR, OFAC, FTR). • Must be a U.S. citizen. Preferred Qualifications • MBA or Master's degree in engineering, management, or a related field. • Program Management Professional (PgMP) certification. • Agile or Scrum certification (CSM, PSM, SAFe). • Direct experience on U.S. Government programs, including FAA or National Airspace System (NAS) programs. Working knowledge of ATC concepts, airfield/tower operations, and simulation/training environments. • Aviation certifications or background (e.g., FAA Control Tower Operator, Pilot License, or equivalent controller/aviation experience). • Experience managing hardware/software procurement and supply-chain logistics on large-value programs. • Active or recently held Public Trust or higher clearance. Travel Requirements Domestic and international travel may be required, including travel to customer and installation sites across a national footprint to support deployments, test events, site activations, and program reviews. Work Location Germantown, MD
Job DescriptionJob Description POSITION IS HYBRID IN THE GREATER SAN DIEGO COUNTY AREA OR VENTURA COUNTY, CA Job Summary The Program Manager is responsible for supporting and managing complex program teams working on large programs. Must interface across the SME's and customers in an environment where the workforce is skilled, valued and specialized in the applications. Serves as the key management link across the programs but with the ability to navigate and understand technical project concepts and challenges. Acts as the interface from VSolvit management to the customer at a local level as required. Oversees staff that handles day to day operations. Provides capture management and support for follow on and new opportunities related to existing programs. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities Responsible for overall program management of assigned projects and programs. Lead work accomplishment across multiple programs and multiple SMEs. Identifies all possible challenges and institutes corrective actions to address them. Defines and institutes strategic and operational goals to achieve desired performance. Manages project team(s) to formulate and track task plans and deliverables. Ensures conformance with program task schedules and costs. Identifies, analyzes and defines project/program requirements and scope. Oversees assigned projects and programs to ensure standards and processes are adhered to, and process improvement opportunities are executed. Ensures CMMI compliance requirements are implemented and adhered to. Communicates effectively across a wide variety of technical and non-technical audiences. Exercises delegated authority for planning, directing, coordinating, administering, and executing many routine and complex projects/programs. Establishes and maintains customer relationships and acts as technical support liaison for all Customers. Develop intimacy with customers and business partners; generates and maintains revenue of business lines Oversees project financials and contract deliverables. Basic Qualifications Bachelor's degree and 10+ years' experience Demonstrated 8+ years of technical software development supervisory experience Demonstrated 4+ years' Project Management supporting DoD or other federal technology programs Demonstrated written and verbal communication skills United States Citizenship Required Must have an Active DoD Secret clearance OR ability to reactive a clearance held within the past 24 months Preferred Qualifications PMP or similar project management related certification Demonstrated 10+ years of related technical and supervisory experience Demonstrated 8+ years' Project Management supporting DoD or other federal technology initiatives Demonstrated experience in management, and multi-task / multi-function projects Demonstrated working knowledge of Department of Defense and/or federal procurement practices. Demonstrated team builder with strong people skills, experienced in creating and maintaining cohesive teams Experience in preparing reports and presenting briefings to customer and company executives Exceptional analytical and problem-solving skills DoD with US Navy experience is a plus Experience with managing programs containing both front and back end development and multiple teams Demonstrated knowledge of CMMI Process analysis and process improvement experience Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
09/22/2026
Full time
Job DescriptionJob Description POSITION IS HYBRID IN THE GREATER SAN DIEGO COUNTY AREA OR VENTURA COUNTY, CA Job Summary The Program Manager is responsible for supporting and managing complex program teams working on large programs. Must interface across the SME's and customers in an environment where the workforce is skilled, valued and specialized in the applications. Serves as the key management link across the programs but with the ability to navigate and understand technical project concepts and challenges. Acts as the interface from VSolvit management to the customer at a local level as required. Oversees staff that handles day to day operations. Provides capture management and support for follow on and new opportunities related to existing programs. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities Responsible for overall program management of assigned projects and programs. Lead work accomplishment across multiple programs and multiple SMEs. Identifies all possible challenges and institutes corrective actions to address them. Defines and institutes strategic and operational goals to achieve desired performance. Manages project team(s) to formulate and track task plans and deliverables. Ensures conformance with program task schedules and costs. Identifies, analyzes and defines project/program requirements and scope. Oversees assigned projects and programs to ensure standards and processes are adhered to, and process improvement opportunities are executed. Ensures CMMI compliance requirements are implemented and adhered to. Communicates effectively across a wide variety of technical and non-technical audiences. Exercises delegated authority for planning, directing, coordinating, administering, and executing many routine and complex projects/programs. Establishes and maintains customer relationships and acts as technical support liaison for all Customers. Develop intimacy with customers and business partners; generates and maintains revenue of business lines Oversees project financials and contract deliverables. Basic Qualifications Bachelor's degree and 10+ years' experience Demonstrated 8+ years of technical software development supervisory experience Demonstrated 4+ years' Project Management supporting DoD or other federal technology programs Demonstrated written and verbal communication skills United States Citizenship Required Must have an Active DoD Secret clearance OR ability to reactive a clearance held within the past 24 months Preferred Qualifications PMP or similar project management related certification Demonstrated 10+ years of related technical and supervisory experience Demonstrated 8+ years' Project Management supporting DoD or other federal technology initiatives Demonstrated experience in management, and multi-task / multi-function projects Demonstrated working knowledge of Department of Defense and/or federal procurement practices. Demonstrated team builder with strong people skills, experienced in creating and maintaining cohesive teams Experience in preparing reports and presenting briefings to customer and company executives Exceptional analytical and problem-solving skills DoD with US Navy experience is a plus Experience with managing programs containing both front and back end development and multiple teams Demonstrated knowledge of CMMI Process analysis and process improvement experience Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
Job DescriptionJob Description Are you a dynamic, seasoned client professional who lives on Long Island, NY and who excels at managing clients and can also help cultivate a client management team by developing processes and best practices - and delivering solutions that scale? If so, this Client Program Manager role is for you. We are looking for someone who has experience managing all aspects of client relationships and who wants to join a dynamic team that is quickly scaling to transform care delivery with its market-leading automated virtual health platform. In this position, you will need to bring passion as well as skills in relationship building, consulting, project management, business analysis, reporting, software lifecycle management, and scaling an organization. This position will require regular transportation to multiple locations primarily on Long Island but also to other sites across New York City. Responsibilities: Be the focal point for the client's every need and become a trusted advisor with clients by deeply understanding their business and aligning their needs with our solutions Track and monitor client status, identifying areas of concern, and pursue growth and upsell opportunities. Drive the onboarding of new client accounts and ensure successful implementations as well as deep trusted relationships. • Write technical and functional requirements, when necessary, during implementation. Act as client advocate while effectively collaborating with internal teams, including product management, content, engineering, growth, and finance. Support the reporting and analytics needs of the client. Build out client management processes internally and identify best practices. • Coordinate, execute, track, and deliver various customer projects from initiation through completion. Identify and resolve operational and services related issues to ensure customer satisfaction. • Assess risks at the customer project level so as to develop and execute risk and contingency management plans as needed. Inform senior management and clients on project status, schedules, and key issues on a regular basis. • Provide timely responses to all customer-driven performance inquiries. Work with the growth team on contract renewals, extensions, and scope change activities. • Improve key aspects of the project lifecycle to creatively address complex problems. Qualifications: Bachelor's degree 7+ years experience in account management & client services organizations working with large clients, healthcare provider system clients preferred Experience in healthcare, providing or supporting care to patients Experience in communicating with senior business leaders Experience with healthcare ROI models Experience working in an organization that provides software as a service Experience using Microsoft Office, Google applications, Jira, Confluence, project management tools Capabilities (skills or knowledge required for success): Excellent written and verbal communication skills Exceptional client relationship-building skills Strong critical thinking and analysis skills with a passion for solving problems that have not been solved before Strong project management skills Ability to communicate well with people at all levels Ability to work cross-functionally in a dynamic team environment Ability to manage influence through persuasion, negotiation, and consensus-building Ability to visit client sites within the New York area but concentrated on Long Island multiple times a week Ability to travel outside of the New York area occasionally At Conversa, we're hard at work developing, marketing, and implementing both our leading conversational care and communication technology as well as the processes and systems that support this future of care delivery and collaboration between providers and their patient users. To help get us there, we're cultivating a diverse and vibrant team that works together to change the way healthcare is delivered. As a rapidly growing company, we've embraced several core values that guide both our culture and team: We care about people - the patients our chats are designed to help, the care team members who use our solutions, our partners who help bring our products to market, and most of all, our team members with whom we work. We strive to be empathetic and trusting, to understand and create space for the sharing of feelings and perspectives from others. We are data-driven. We strive to make decisions based on the best available data. If data changes, we will be open to changing our perspective. We will always endeavor to collect and create the most rigorous data we can. We, similar to the best healthcare providers, are evidence-based. We are passionate about improving the health & care of every person we can, and we are passionate about building a sustainable company that can impact the lives of as many people as possible. We are passionate about doing it with team members who share the same passion. We strive to be proactive. Just like we are trying to move healthcare from being reactive to proactive, we value pushing things forward - solutions, ideas, the business, ourselves. We are problem solvers. To be great problem solvers, we need to identify which are the important problems to solve and be creative, collaborative, and relentless until they are solved. Bundled with our strong culture, we offer all Conversans competitive compensation, regardless of location, and a comprehensive benefits package including: 401k plan Medical, Dental, Vision benefits Monthly Grubhub Stipend Flexible PTO Paid parental leave Fully Embrace Remote Teamwork Career Development MacBook Pro and hardware stipend to get you started And more Whether it's scaling our platform to handle millions of automated chats a day or designing a beautiful, frictionless, and delightful experience for patient users and their care team; Conversa has many unique and creative opportunities to impact the future of automated virtual care. Apply Today!
09/22/2026
Full time
Job DescriptionJob Description Are you a dynamic, seasoned client professional who lives on Long Island, NY and who excels at managing clients and can also help cultivate a client management team by developing processes and best practices - and delivering solutions that scale? If so, this Client Program Manager role is for you. We are looking for someone who has experience managing all aspects of client relationships and who wants to join a dynamic team that is quickly scaling to transform care delivery with its market-leading automated virtual health platform. In this position, you will need to bring passion as well as skills in relationship building, consulting, project management, business analysis, reporting, software lifecycle management, and scaling an organization. This position will require regular transportation to multiple locations primarily on Long Island but also to other sites across New York City. Responsibilities: Be the focal point for the client's every need and become a trusted advisor with clients by deeply understanding their business and aligning their needs with our solutions Track and monitor client status, identifying areas of concern, and pursue growth and upsell opportunities. Drive the onboarding of new client accounts and ensure successful implementations as well as deep trusted relationships. • Write technical and functional requirements, when necessary, during implementation. Act as client advocate while effectively collaborating with internal teams, including product management, content, engineering, growth, and finance. Support the reporting and analytics needs of the client. Build out client management processes internally and identify best practices. • Coordinate, execute, track, and deliver various customer projects from initiation through completion. Identify and resolve operational and services related issues to ensure customer satisfaction. • Assess risks at the customer project level so as to develop and execute risk and contingency management plans as needed. Inform senior management and clients on project status, schedules, and key issues on a regular basis. • Provide timely responses to all customer-driven performance inquiries. Work with the growth team on contract renewals, extensions, and scope change activities. • Improve key aspects of the project lifecycle to creatively address complex problems. Qualifications: Bachelor's degree 7+ years experience in account management & client services organizations working with large clients, healthcare provider system clients preferred Experience in healthcare, providing or supporting care to patients Experience in communicating with senior business leaders Experience with healthcare ROI models Experience working in an organization that provides software as a service Experience using Microsoft Office, Google applications, Jira, Confluence, project management tools Capabilities (skills or knowledge required for success): Excellent written and verbal communication skills Exceptional client relationship-building skills Strong critical thinking and analysis skills with a passion for solving problems that have not been solved before Strong project management skills Ability to communicate well with people at all levels Ability to work cross-functionally in a dynamic team environment Ability to manage influence through persuasion, negotiation, and consensus-building Ability to visit client sites within the New York area but concentrated on Long Island multiple times a week Ability to travel outside of the New York area occasionally At Conversa, we're hard at work developing, marketing, and implementing both our leading conversational care and communication technology as well as the processes and systems that support this future of care delivery and collaboration between providers and their patient users. To help get us there, we're cultivating a diverse and vibrant team that works together to change the way healthcare is delivered. As a rapidly growing company, we've embraced several core values that guide both our culture and team: We care about people - the patients our chats are designed to help, the care team members who use our solutions, our partners who help bring our products to market, and most of all, our team members with whom we work. We strive to be empathetic and trusting, to understand and create space for the sharing of feelings and perspectives from others. We are data-driven. We strive to make decisions based on the best available data. If data changes, we will be open to changing our perspective. We will always endeavor to collect and create the most rigorous data we can. We, similar to the best healthcare providers, are evidence-based. We are passionate about improving the health & care of every person we can, and we are passionate about building a sustainable company that can impact the lives of as many people as possible. We are passionate about doing it with team members who share the same passion. We strive to be proactive. Just like we are trying to move healthcare from being reactive to proactive, we value pushing things forward - solutions, ideas, the business, ourselves. We are problem solvers. To be great problem solvers, we need to identify which are the important problems to solve and be creative, collaborative, and relentless until they are solved. Bundled with our strong culture, we offer all Conversans competitive compensation, regardless of location, and a comprehensive benefits package including: 401k plan Medical, Dental, Vision benefits Monthly Grubhub Stipend Flexible PTO Paid parental leave Fully Embrace Remote Teamwork Career Development MacBook Pro and hardware stipend to get you started And more Whether it's scaling our platform to handle millions of automated chats a day or designing a beautiful, frictionless, and delightful experience for patient users and their care team; Conversa has many unique and creative opportunities to impact the future of automated virtual care. Apply Today!
