The Critical Projects Implementation (CPI) team is a project management and execution team that manages construction activity within the operational data center spaces. The CPI team is tasked with critical infrastructure improvement projects to optimize utilization of space, power, and cooling within operation data centers around the globe. These activities are outside of the scope of standard construction delivery and regular preventative maintenance tasks. We are currently seeking an experienced and proactive Data Center Project Manager to serve as a technical resource within Amazon data centers. You will be part of a highly creative, efficient team tasked with tackling the most fascinating and challenges in designing, building, and operating Amazon data facilities. The Project Manager is ultimately responsible for project oversight and review of all disciplines including electrical, mechanical, controls, and architectural. A fundamental understanding of these systems is required, as the individual will be expected to identify areas for improvement as well as act on data provided from other team and organizations. Ideal candidates will possess the ability to design, develop and deploy innovative solutions to address operational challenges. This role requires both independent contribution as well as the ability to work within multi-disciplinary teams. The scope of projects will include but not limited to the improvement of electrical, mechanical, fire detection and building automation system. The Project Manager is responsible for the overall direction, coordination, implementation, execution, control and completion of specific projects ensuring consistency with company strategy, commitments and goals. If you are passionate about the Customer Experience; you think big; and you want to contribute to the operational excellence of Amazon data centers then this may be the challenge you've been looking for! This position requires that the candidate selected be a US Citizen and obtain and maintain an active TS/SCI security clearance with polygraph. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Warrenton - 111 100.00 USD annually
09/24/2026
Full time
The Critical Projects Implementation (CPI) team is a project management and execution team that manages construction activity within the operational data center spaces. The CPI team is tasked with critical infrastructure improvement projects to optimize utilization of space, power, and cooling within operation data centers around the globe. These activities are outside of the scope of standard construction delivery and regular preventative maintenance tasks. We are currently seeking an experienced and proactive Data Center Project Manager to serve as a technical resource within Amazon data centers. You will be part of a highly creative, efficient team tasked with tackling the most fascinating and challenges in designing, building, and operating Amazon data facilities. The Project Manager is ultimately responsible for project oversight and review of all disciplines including electrical, mechanical, controls, and architectural. A fundamental understanding of these systems is required, as the individual will be expected to identify areas for improvement as well as act on data provided from other team and organizations. Ideal candidates will possess the ability to design, develop and deploy innovative solutions to address operational challenges. This role requires both independent contribution as well as the ability to work within multi-disciplinary teams. The scope of projects will include but not limited to the improvement of electrical, mechanical, fire detection and building automation system. The Project Manager is responsible for the overall direction, coordination, implementation, execution, control and completion of specific projects ensuring consistency with company strategy, commitments and goals. If you are passionate about the Customer Experience; you think big; and you want to contribute to the operational excellence of Amazon data centers then this may be the challenge you've been looking for! This position requires that the candidate selected be a US Citizen and obtain and maintain an active TS/SCI security clearance with polygraph. About the team AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Warrenton - 111 100.00 USD annually
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. The Engineering and Sciences organization (E&S) pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission! Northrop Grumman Mission Systems' Baltimore and Partnered Sites (BaPs) division is seeking a Systems Integration & Test (SI&T) Engineers (Level 2 or Level 3) in Baltimore, MD to support test and verification activities of RF sensor systems. What you'll get to do: As the lead developer of radars, COMMS, and SIGINT for some of the most advanced systems in the U.S. arsenal, Northrop Grumman Mission Systems is a world leader in advanced sensor systems and design. These include airborne RADARs for fighter jets & UAVs including F-22, F-35, F-16, Global Hawk (Triton), and Gray Eagle (STARLite), airborne surveillance RADARs for AWACS and E-7 (MESA), and ground and maritime RADARs including G/ATOR and SEWIP. Qualified Systems Integration, Test & Evaluation (SITE) engineers will perform hands-on integration and testing of sophisticated RF sensor systems, including both hardware and software components in development and production environments; Synthesize internal and external customer needs and requirements into system tests that acknowledge technical and schedule constraints; Participate in the development and execution of comprehensive test plans, procedures, and schedules for verifying system requirements; participate in I&T readiness reviews, design reviews and conducts audits of I&T program facilities; Coordinate integrated testing activities that may include environmental, reliability and the occasional flight test; Review and evaluate test requirements to ensure completeness of test program; Perform analysis of test results and prepares comprehensive reports; Use modeling and simulation tools to expedite testing of individual units before all system components are available and for troubleshooting and repair of failed units. What You'll Get to Do: Experienced systems engineer providing technical leadership for ATP, Development I&T, and Capabilities I&T activities. This role leads test planning and execution, lab configuration management, and requirements verification across multiple SILs and benches, while mentoring early career engineers. Key responsibilities Lead lab and bench ownership Serve as lead maintainer for one or more integration labs/benches (e.g., SILs, Mode benches, MATE bays). Own bench design changes, maintenance planning, and configuration management of HW/SW, processors, and test equipment. Own test planning and execution Develop and lead LRIP ATP, HW DVT, and SSQT test plans, procedures, and success criteria. Define and manage regression test campaigns for system SW OFP, FW, FESW, BSCT and related components. Coordinate Mode SIL bench operations and flight test preparation and support, including objectives and No/Go criteria. Drive system integration of new capabilities Lead MATE and system integration of new advanced capabilities into SILs and lab environments. Ensure integration plans and test strategies support accelerated development and delivery schedules. Manage configuration and verification artifacts Own configuration management processes for MATE and system test environments, ensuring traceability and controlled changes. Lead PBS SE requirements verification, including VCRM content, verification documentation, and closure of requirements. Troubleshooting, coordination, and mentoring Lead HW/SW troubleshooting across multiple SILs and benches. Coordinate with SIT, TDE, FW, FESW, subsystem I&T, SEC, Mode, and other stakeholders as primary technical contact for integration and test issues. Mentor T02 engineers (Req A hires) in test design, execution, and verification practices. This is a 2nd shift position This requisition may be filled at a higher grade based on qualifications listed below This requisition may be filled at either a Principal Level or a Sr. Principal Level. Basic Qualifications for a Principal Systems Engineer - Integration & Test Bachelor's degree in a STEM discipline or related field with 5+ years of relevant experience with; 3+ years with a Master's; 1+ year with a PhD. Demonstrated experience in system integration and test on complex HW/SW systems, preferably in defense or aerospace. Experience leading lab/bench ownership, test campaigns, or requirements verification activities. Strong communication and leadership skills; ability to coordinate across multiple teams and present technical status to management and customers. Active DoD Secret clearance and the ability to obtain/maintain Special Program Access (SAP) prior to start is required. Candidate must be a US citizen Ability to work onsite in Baltimore, MD. Willingness to work 2nd shift Basic Qualifications for a Principal Systems Engineer - Integration & Test Bachelor's degree in a STEM discipline or related field with 8+ years of relevant experience with; 6+ years with a Master's; 4+ year with a PhD. Demonstrated experience in system integration and test on complex HW/SW systems, preferably in defense or aerospace. Experience leading lab/bench ownership, test campaigns, or requirements verification activities. Strong communication and leadership skills; ability to coordinate across multiple teams and present technical status to management and customers. Active DoD Secret clearance and the ability to obtain/maintain Special Program Access (SAP) prior to start is required. Candidate must be a US citizen Ability to work onsite in Baltimore, MD. Willingness to work 2nd shift Preferred qualifications Prior experience on Tactical Radar Programs or similar mission systems. Familiarity with configuration management tools and disciplined processes for complex test environments. Experience directing flight test objectives, No/Go criteria, and test configuration. This position is contingent upon transfer of active DoD Secret Clearance and approved special program access. Primary Level Salary Range: $108,800.00 - $163,200.00 Secondary Level Salary Range: $135,800.00 - $203,600.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
09/24/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. The Engineering and Sciences organization (E&S) pushes the boundaries of innovation, redefines engineering capabilities, and drives advances in various sciences. Our team is chartered with providing the skills, innovative technologies to develop, design, produce and sustain optimized product lines across the sector while providing a decisive advantage to the warfighter. Come be a part of our mission! Northrop Grumman Mission Systems' Baltimore and Partnered Sites (BaPs) division is seeking a Systems Integration & Test (SI&T) Engineers (Level 2 or Level 3) in Baltimore, MD to support test and verification activities of RF sensor systems. What you'll get to do: As the lead developer of radars, COMMS, and SIGINT for some of the most advanced systems in the U.S. arsenal, Northrop Grumman Mission Systems is a world leader in advanced sensor systems and design. These include airborne RADARs for fighter jets & UAVs including F-22, F-35, F-16, Global Hawk (Triton), and Gray Eagle (STARLite), airborne surveillance RADARs for AWACS and E-7 (MESA), and ground and maritime RADARs including G/ATOR and SEWIP. Qualified Systems Integration, Test & Evaluation (SITE) engineers will perform hands-on integration and testing of sophisticated RF sensor systems, including both hardware and software components in development and production environments; Synthesize internal and external customer needs and requirements into system tests that acknowledge technical and schedule constraints; Participate in the development and execution of comprehensive test plans, procedures, and schedules for verifying system requirements; participate in I&T readiness reviews, design reviews and conducts audits of I&T program facilities; Coordinate integrated testing activities that may include environmental, reliability and the occasional flight test; Review and evaluate test requirements to ensure completeness of test program; Perform analysis of test results and prepares comprehensive reports; Use modeling and simulation tools to expedite testing of individual units before all system components are available and for troubleshooting and repair of failed units. What You'll Get to Do: Experienced systems engineer providing technical leadership for ATP, Development I&T, and Capabilities I&T activities. This role leads test planning and execution, lab configuration management, and requirements verification across multiple SILs and benches, while mentoring early career engineers. Key responsibilities Lead lab and bench ownership Serve as lead maintainer for one or more integration labs/benches (e.g., SILs, Mode benches, MATE bays). Own bench design changes, maintenance planning, and configuration management of HW/SW, processors, and test equipment. Own test planning and execution Develop and lead LRIP ATP, HW DVT, and SSQT test plans, procedures, and success criteria. Define and manage regression test campaigns for system SW OFP, FW, FESW, BSCT and related components. Coordinate Mode SIL bench operations and flight test preparation and support, including objectives and No/Go criteria. Drive system integration of new capabilities Lead MATE and system integration of new advanced capabilities into SILs and lab environments. Ensure integration plans and test strategies support accelerated development and delivery schedules. Manage configuration and verification artifacts Own configuration management processes for MATE and system test environments, ensuring traceability and controlled changes. Lead PBS SE requirements verification, including VCRM content, verification documentation, and closure of requirements. Troubleshooting, coordination, and mentoring Lead HW/SW troubleshooting across multiple SILs and benches. Coordinate with SIT, TDE, FW, FESW, subsystem I&T, SEC, Mode, and other stakeholders as primary technical contact for integration and test issues. Mentor T02 engineers (Req A hires) in test design, execution, and verification practices. This is a 2nd shift position This requisition may be filled at a higher grade based on qualifications listed below This requisition may be filled at either a Principal Level or a Sr. Principal Level. Basic Qualifications for a Principal Systems Engineer - Integration & Test Bachelor's degree in a STEM discipline or related field with 5+ years of relevant experience with; 3+ years with a Master's; 1+ year with a PhD. Demonstrated experience in system integration and test on complex HW/SW systems, preferably in defense or aerospace. Experience leading lab/bench ownership, test campaigns, or requirements verification activities. Strong communication and leadership skills; ability to coordinate across multiple teams and present technical status to management and customers. Active DoD Secret clearance and the ability to obtain/maintain Special Program Access (SAP) prior to start is required. Candidate must be a US citizen Ability to work onsite in Baltimore, MD. Willingness to work 2nd shift Basic Qualifications for a Principal Systems Engineer - Integration & Test Bachelor's degree in a STEM discipline or related field with 8+ years of relevant experience with; 6+ years with a Master's; 4+ year with a PhD. Demonstrated experience in system integration and test on complex HW/SW systems, preferably in defense or aerospace. Experience leading lab/bench ownership, test campaigns, or requirements verification activities. Strong communication and leadership skills; ability to coordinate across multiple teams and present technical status to management and customers. Active DoD Secret clearance and the ability to obtain/maintain Special Program Access (SAP) prior to start is required. Candidate must be a US citizen Ability to work onsite in Baltimore, MD. Willingness to work 2nd shift Preferred qualifications Prior experience on Tactical Radar Programs or similar mission systems. Familiarity with configuration management tools and disciplined processes for complex test environments. Experience directing flight test objectives, No/Go criteria, and test configuration. This position is contingent upon transfer of active DoD Secret Clearance and approved special program access. Primary Level Salary Range: $108,800.00 - $163,200.00 Secondary Level Salary Range: $135,800.00 - $203,600.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. We are currently seeking a Data Center Project Manager to serve as a technical resource within Amazon data centers. You will be part of a highly creative, efficient team tasked with tackling the most fascinating and challenges in designing, building, and operating Amazon data facilities. The Project Manager is ultimately responsible for project oversight and review of all disciplines including electrical, mechanical, controls, and architectural. A fundamental understanding of these systems is required, as the individual will be expected to identify areas for improvement as well as act on data provided from other team and organizations. Ideal candidates will possess the ability to design, develop and deploy innovative solutions to address operational challenges. This role requires both independent contribution as well as the ability to work within multi-disciplinary teams. The scope of projects will include but not limited to the improvement of electrical, mechanical, fire detection and building automation system. The Project Manager is responsible for the overall direction, coordination, implementation, execution, control and completion of specific projects ensuring consistency with company strategy, commitments and goals. If you are passionate about the Customer Experience; you think big; and you want to contribute to the operational excellence of Amazon data centers then this may be the challenge you've been looking for! About the team AWS Infrastructure Services (AIS) AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Sterling - 111 100.00 USD annually
09/24/2026
Full time
AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. We are currently seeking a Data Center Project Manager to serve as a technical resource within Amazon data centers. You will be part of a highly creative, efficient team tasked with tackling the most fascinating and challenges in designing, building, and operating Amazon data facilities. The Project Manager is ultimately responsible for project oversight and review of all disciplines including electrical, mechanical, controls, and architectural. A fundamental understanding of these systems is required, as the individual will be expected to identify areas for improvement as well as act on data provided from other team and organizations. Ideal candidates will possess the ability to design, develop and deploy innovative solutions to address operational challenges. This role requires both independent contribution as well as the ability to work within multi-disciplinary teams. The scope of projects will include but not limited to the improvement of electrical, mechanical, fire detection and building automation system. The Project Manager is responsible for the overall direction, coordination, implementation, execution, control and completion of specific projects ensuring consistency with company strategy, commitments and goals. If you are passionate about the Customer Experience; you think big; and you want to contribute to the operational excellence of Amazon data centers then this may be the challenge you've been looking for! About the team AWS Infrastructure Services (AIS) AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Why AWS Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Diverse Experiences Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. Work/Life Balance We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Inclusive Team Culture Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship and Career Growth We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS - Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field - Experience carrying new design concepts through exploration, development, and into deployment or mass production - Experience in MS Excel, Word, and Windows Operating Systems - Experience with power management and power monitoring systems PREFERRED QUALIFICATIONS - 5+ years of project management in data centers or comparable critical infrastructure experience - Knowledge of critical data center equipment - Knowledge of engineering documentation, electrical diagrams and standard operating procedures - Knowledge of building codes and regulations including Life Safety, BOCA, NFPA, NEC, or OSHA - Experience in project management in data centers or comparable critical infrastructure - Experience in Data Center Engineering Operations, with a deep understanding of electrical and mechanical data center infrastructure - Experience reading and interpreting construction specifications and drawings for all domains Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, VA, Sterling - 111 100.00 USD annually
Job Description Job Description Locations: Athens, OH / New Albany, OH/Oklahoma City. OK/Plano, TX Schedule: 8-hour shifts Travel: Up to 100% Contract: Contract opportunity Job Overview We are looking for a hands-on Data Center Services Technician to support installation, maintenance, and operational activities in hyperscale and enterprise data center environments. This position is a good fit for candidates with experience in data center operations, structured cabling, telecommunications, field services, or Information Technology (IT) infrastructure . Key Responsibilities Install and deploy servers, network devices, storage equipment, and related infrastructure. Perform rack-and-stack activities and equipment installation. Install, route, terminate, label, and dress copper and fiber cabling. Install rack Power Distribution Units (PDUs) and connect equipment to power. Perform equipment provisioning and hardware component installation. Connect and support Out-of-Band (OOB) management systems. Perform continuity testing, fiber verification, and equipment turn-up. Perform Moves, Adds, Changes, and Disconnects (MACD) and Field-Replaceable Unit (FRU) replacements. Maintain installation records, test results, inventory, and as-built documentation. Identify and escalate technical, design, and safety issues. Required Qualifications High school diploma, technical certification, vocational training, or equivalent experience. 1+ year of experience in data centers, structured cabling, telecommunications, field services, or IT infrastructure. Hands-on experience with racks, servers, networking equipment, and cabling. Knowledge of copper and fiber cabling practices. Ability to read engineering drawings, installation documents, and Methods of Procedure (MOPs). Ability to work independently with minimal supervision. Valid state ID or driver's license. Ability to lift and move equipment up to 50 lbs. Comfortable working on ladders or elevated work platforms. Willingness to travel up to 100%. Preferred Experience Fiber verification and continuity testing. Optical networking. Equipment turn-up and provisioning. MACD activities. FRU replacement. Out-of-Band (OOB) management. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process.
09/24/2026
Full time
Job Description Job Description Locations: Athens, OH / New Albany, OH/Oklahoma City. OK/Plano, TX Schedule: 8-hour shifts Travel: Up to 100% Contract: Contract opportunity Job Overview We are looking for a hands-on Data Center Services Technician to support installation, maintenance, and operational activities in hyperscale and enterprise data center environments. This position is a good fit for candidates with experience in data center operations, structured cabling, telecommunications, field services, or Information Technology (IT) infrastructure . Key Responsibilities Install and deploy servers, network devices, storage equipment, and related infrastructure. Perform rack-and-stack activities and equipment installation. Install, route, terminate, label, and dress copper and fiber cabling. Install rack Power Distribution Units (PDUs) and connect equipment to power. Perform equipment provisioning and hardware component installation. Connect and support Out-of-Band (OOB) management systems. Perform continuity testing, fiber verification, and equipment turn-up. Perform Moves, Adds, Changes, and Disconnects (MACD) and Field-Replaceable Unit (FRU) replacements. Maintain installation records, test results, inventory, and as-built documentation. Identify and escalate technical, design, and safety issues. Required Qualifications High school diploma, technical certification, vocational training, or equivalent experience. 1+ year of experience in data centers, structured cabling, telecommunications, field services, or IT infrastructure. Hands-on experience with racks, servers, networking equipment, and cabling. Knowledge of copper and fiber cabling practices. Ability to read engineering drawings, installation documents, and Methods of Procedure (MOPs). Ability to work independently with minimal supervision. Valid state ID or driver's license. Ability to lift and move equipment up to 50 lbs. Comfortable working on ladders or elevated work platforms. Willingness to travel up to 100%. Preferred Experience Fiber verification and continuity testing. Optical networking. Equipment turn-up and provisioning. MACD activities. FRU replacement. Out-of-Band (OOB) management. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process.
Sterling Entertainment Enterprises, LLC
New York, New York
Job Description Job Description About Us SNY is an Emmy Award-winning regional sports media company delivering content across linear television and digital platforms. SNY provides unmatched, exclusive coverage of the New York Mets, New York Jets, and all things New York sports. As the Tri-State area's leader in local sports coverage, SNY offers comprehensive access to professional and collegiate teams through exclusive live games, nightly sports shows, and original programming. SNY also delivers real-time New York sports news and exclusive digital series on SNY.tv and across its social channels, including YouTube, Facebook, X, and Instagram. SNY is available to viewers throughout New York, Connecticut, New Jersey, and northeastern Pennsylvania, and nationally through select providers. About the Role We are looking for a seasoned, hands-on Broadcast Engineer to join our SNY Engineering and Operations team. This position is responsible for maintaining equipment & technical standards at a production and newsroom facility. This is a fast-paced, collaborative role for someone who thrives under pressure, takes ownership, and is passionate about technology in a broadcast and control room environment. NY sports fans are welcome but not required! This role reports to our Sr. Manager, Engineer. This is an in-office role 5 days per week out of our offices at WTC. It may also include travel to Citi field, MetLife or a remote venue What You'll Do Support multiple daily live in studio productions, including editing workstations, production Control rooms, camera control, audio and Studio equipment and systems. Act as quality control for incoming/outgoing video feeds. Perform preventative maintenance on studio, ENG & newsroom equipment. Assist as a backup for studio technical managers and oversee live productions, crews, and scheduled shows Perform daily preventive maintenance and troubleshoot issues in audio, video, intercom, and related broadcast systems. Maintain quality control for all incoming feeds including Zoom calls, LiveU and truck game feeds, routing, IFB & PL communication. Working with external technical vendor support to ensure timely resolution of internal requests and resolution of problem. Implement studio and remote related maintenance duties as required and assigned. Experience in supporting studio technology and applications used in the broadcast industry. Assist to Evaluate, test, and install upgrades to existing broadcast and networking system and / or new hardware - technology implementation. What You'll Bring Must have a minimum of seven years of experience is a professional broadcast engineering role at a studio environment - live broadcast production facility. Experience with a non linear edit system such as Avid & the Adobe Creative Cloud Suite desired. Experience with SSL audio, Grass Valley / Ross switchers, Ross Cambot robotics, Overdrive automation, Xpression, Evertz router (monitoring and control), Sony Wireless RF and RTS Telex intercoms required. Knowledge of traditional IP/LAN infrastructures and Storage technology. Position requires non-traditional working day and hours Occasional travel is anticipated for remote productions and maintenance Positive work ethic, ability to work well in groups to execute projects on time while maintaining the manager's expectations. LED wall experience (Utilizing NovaStar tech and 4K knowledge a Plus) Ability to communicate and interact effectively with diverse audiences across different departments, ranging from non technical clients to technical professionals and operations staff. Knowledge of Video over IP protocol (RTP / SRT) as we utilize Haivision, LiveU, Evertz and Nevion distribution systems. Eligibility Requirements: BS in Engineering / Computer Science or have a minimum of 7 years professional Broadcast Staff Engineer experience in a live studio production facility. Ability to work independently, prioritize tasks, and solve complex technical issues in real-time. Experience in a similar role with a media company, systems integrator, or other relevant industry. Must be able to work flexible hours including weekdays, weekends, holidays, and overnights. Ability to lift and carry 30+ pounds of gear.
09/24/2026
Full time
Job Description Job Description About Us SNY is an Emmy Award-winning regional sports media company delivering content across linear television and digital platforms. SNY provides unmatched, exclusive coverage of the New York Mets, New York Jets, and all things New York sports. As the Tri-State area's leader in local sports coverage, SNY offers comprehensive access to professional and collegiate teams through exclusive live games, nightly sports shows, and original programming. SNY also delivers real-time New York sports news and exclusive digital series on SNY.tv and across its social channels, including YouTube, Facebook, X, and Instagram. SNY is available to viewers throughout New York, Connecticut, New Jersey, and northeastern Pennsylvania, and nationally through select providers. About the Role We are looking for a seasoned, hands-on Broadcast Engineer to join our SNY Engineering and Operations team. This position is responsible for maintaining equipment & technical standards at a production and newsroom facility. This is a fast-paced, collaborative role for someone who thrives under pressure, takes ownership, and is passionate about technology in a broadcast and control room environment. NY sports fans are welcome but not required! This role reports to our Sr. Manager, Engineer. This is an in-office role 5 days per week out of our offices at WTC. It may also include travel to Citi field, MetLife or a remote venue What You'll Do Support multiple daily live in studio productions, including editing workstations, production Control rooms, camera control, audio and Studio equipment and systems. Act as quality control for incoming/outgoing video feeds. Perform preventative maintenance on studio, ENG & newsroom equipment. Assist as a backup for studio technical managers and oversee live productions, crews, and scheduled shows Perform daily preventive maintenance and troubleshoot issues in audio, video, intercom, and related broadcast systems. Maintain quality control for all incoming feeds including Zoom calls, LiveU and truck game feeds, routing, IFB & PL communication. Working with external technical vendor support to ensure timely resolution of internal requests and resolution of problem. Implement studio and remote related maintenance duties as required and assigned. Experience in supporting studio technology and applications used in the broadcast industry. Assist to Evaluate, test, and install upgrades to existing broadcast and networking system and / or new hardware - technology implementation. What You'll Bring Must have a minimum of seven years of experience is a professional broadcast engineering role at a studio environment - live broadcast production facility. Experience with a non linear edit system such as Avid & the Adobe Creative Cloud Suite desired. Experience with SSL audio, Grass Valley / Ross switchers, Ross Cambot robotics, Overdrive automation, Xpression, Evertz router (monitoring and control), Sony Wireless RF and RTS Telex intercoms required. Knowledge of traditional IP/LAN infrastructures and Storage technology. Position requires non-traditional working day and hours Occasional travel is anticipated for remote productions and maintenance Positive work ethic, ability to work well in groups to execute projects on time while maintaining the manager's expectations. LED wall experience (Utilizing NovaStar tech and 4K knowledge a Plus) Ability to communicate and interact effectively with diverse audiences across different departments, ranging from non technical clients to technical professionals and operations staff. Knowledge of Video over IP protocol (RTP / SRT) as we utilize Haivision, LiveU, Evertz and Nevion distribution systems. Eligibility Requirements: BS in Engineering / Computer Science or have a minimum of 7 years professional Broadcast Staff Engineer experience in a live studio production facility. Ability to work independently, prioritize tasks, and solve complex technical issues in real-time. Experience in a similar role with a media company, systems integrator, or other relevant industry. Must be able to work flexible hours including weekdays, weekends, holidays, and overnights. Ability to lift and carry 30+ pounds of gear.
Job Description Job Description At Lumibuild as an AV Technician II, you will be responsible for the overall quality of projects delivered to clients. This includes guiding installers, physically installing AV equipment, and properly configuring AV systems. On many projects you will function as the lead technician onsite. You will work closely with Engineering and Technical Project managers to maintain standards, stay on schedule, and mentor lower level technicians. You will also be accountable for commissioning AV systems and documenting the process. The goal for each project is to ensure that clients receive awesome, complete, and functional AV spaces. As a Tech II, you will also be able to diagnosis and troubleshoot pre-existing systems for all types of post-integration support. Job Requirements This position is not entry-level and requires previous experience, training, and abilities: Strong verbal and written communication skills Minimum 2 years experience in commercial AV field Intermediate knowledge of audio and video components, signal types, cables Proficiency in soldering, crimping and compression terminations Understanding of wire pull techniques and the concept of conduit fill capacity Able to build structure for mounting of AV equipment on-site with supervision Use coax and category cable testing and toning Demonstrated familiarity with major manufacturers and major product lines. Basic understanding of networking: IP addressing, MAC address, network hardware such as routers and switches Able to read system drawings Strong computer skills Knowledge of control systems and commonly controlled devices. Ability to connect to and load profiles / programs to major AV devices - i.e. Crestron, Extron, Biamp, Shure, QSC Experience with Dante networked audio - Dante controller Understands the concept of audio signal levels with ability to critically listen to DSP audio and tune system for VTC needs Strong troubleshooting skills Experience with commissioning newly installed systems and completing comprehensive checklists / reports Demonstrated consistency, efficiency, and accuracy in all termination methods Understands concept of projector throw distance and the relationship between it and the projected image size Adjusts projectors after physical installation so as to ensure proper screen fill and focu Understands the difference between series and parallel circuits Demonstrated ability to effectively and consistently lead a job site. When leading a site, plan the day so as to maximize use of resources and avoid idle time Have mid-level rack fabrication skills: 1) The ability to determine best mounting methods for rack devices and makes recommendations for improvements 2) Understanding of rack cooling 3) Understanding of the implications of equipment placement in a rack as it relates to cooling and equipment performance (for example wireless equipment 4) Understanding of signal segregation Demonstrated experience with on-site safety procedures: Follow company safety and security policies; reports accidents, injuries and unsafe working conditions as required Maintain work area clean and free of clutter Understand the concept of the grading system for fasteners, for example: SAE-2, SAE-5, and SAE-8 or ISO 8.8 Understand concept of a fire wall, and the impact of a fire walls to installation tasks Properly maintains, uses and has available at all times, the required personal protection equipment (PPE) OSHA: "The Human Element: How you affect safety" Egress and emergency action plans Scaffolding safety Additionally, the following characteristics are not required, but are preferred: CTS Certification Basic IT networking knowledge Completion of scissor lift certification Completion of boom lift certification OSHA 10 Certification. Personal Values and Work Ethics Punctuality Drive to follow through completion of projects and technical issues Acts and communicates in a professional manner concisely and timely Works without supervision Helps train entry-level technicians Self starter that proactively takes on tasks Professional appearance Company Description Lumibuild is a commercial technology integrator headquartered in Emeryville, CA. We are a young, fast-growing company and are looking for team members who are ambitious and want to grow with us! Currently we are hiring experienced, focused, and energetic people in multiple positions that can hit the ground running. The roles are full-time and require travel around the Bay Area. Company Description Lumibuild is a commercial technology integrator headquartered in Emeryville, CA. We are a young, fast-growing company and are looking for team members who are ambitious and want to grow with us! Currently we are hiring experienced, focused, and energetic people in multiple positions that can hit the ground running. The roles are full-time and require travel around the Bay Area.
09/24/2026
Full time
Job Description Job Description At Lumibuild as an AV Technician II, you will be responsible for the overall quality of projects delivered to clients. This includes guiding installers, physically installing AV equipment, and properly configuring AV systems. On many projects you will function as the lead technician onsite. You will work closely with Engineering and Technical Project managers to maintain standards, stay on schedule, and mentor lower level technicians. You will also be accountable for commissioning AV systems and documenting the process. The goal for each project is to ensure that clients receive awesome, complete, and functional AV spaces. As a Tech II, you will also be able to diagnosis and troubleshoot pre-existing systems for all types of post-integration support. Job Requirements This position is not entry-level and requires previous experience, training, and abilities: Strong verbal and written communication skills Minimum 2 years experience in commercial AV field Intermediate knowledge of audio and video components, signal types, cables Proficiency in soldering, crimping and compression terminations Understanding of wire pull techniques and the concept of conduit fill capacity Able to build structure for mounting of AV equipment on-site with supervision Use coax and category cable testing and toning Demonstrated familiarity with major manufacturers and major product lines. Basic understanding of networking: IP addressing, MAC address, network hardware such as routers and switches Able to read system drawings Strong computer skills Knowledge of control systems and commonly controlled devices. Ability to connect to and load profiles / programs to major AV devices - i.e. Crestron, Extron, Biamp, Shure, QSC Experience with Dante networked audio - Dante controller Understands the concept of audio signal levels with ability to critically listen to DSP audio and tune system for VTC needs Strong troubleshooting skills Experience with commissioning newly installed systems and completing comprehensive checklists / reports Demonstrated consistency, efficiency, and accuracy in all termination methods Understands concept of projector throw distance and the relationship between it and the projected image size Adjusts projectors after physical installation so as to ensure proper screen fill and focu Understands the difference between series and parallel circuits Demonstrated ability to effectively and consistently lead a job site. When leading a site, plan the day so as to maximize use of resources and avoid idle time Have mid-level rack fabrication skills: 1) The ability to determine best mounting methods for rack devices and makes recommendations for improvements 2) Understanding of rack cooling 3) Understanding of the implications of equipment placement in a rack as it relates to cooling and equipment performance (for example wireless equipment 4) Understanding of signal segregation Demonstrated experience with on-site safety procedures: Follow company safety and security policies; reports accidents, injuries and unsafe working conditions as required Maintain work area clean and free of clutter Understand the concept of the grading system for fasteners, for example: SAE-2, SAE-5, and SAE-8 or ISO 8.8 Understand concept of a fire wall, and the impact of a fire walls to installation tasks Properly maintains, uses and has available at all times, the required personal protection equipment (PPE) OSHA: "The Human Element: How you affect safety" Egress and emergency action plans Scaffolding safety Additionally, the following characteristics are not required, but are preferred: CTS Certification Basic IT networking knowledge Completion of scissor lift certification Completion of boom lift certification OSHA 10 Certification. Personal Values and Work Ethics Punctuality Drive to follow through completion of projects and technical issues Acts and communicates in a professional manner concisely and timely Works without supervision Helps train entry-level technicians Self starter that proactively takes on tasks Professional appearance Company Description Lumibuild is a commercial technology integrator headquartered in Emeryville, CA. We are a young, fast-growing company and are looking for team members who are ambitious and want to grow with us! Currently we are hiring experienced, focused, and energetic people in multiple positions that can hit the ground running. The roles are full-time and require travel around the Bay Area. Company Description Lumibuild is a commercial technology integrator headquartered in Emeryville, CA. We are a young, fast-growing company and are looking for team members who are ambitious and want to grow with us! Currently we are hiring experienced, focused, and energetic people in multiple positions that can hit the ground running. The roles are full-time and require travel around the Bay Area.
Requirements:3-8 years of software development experience Proficiency in one or more programming languages such as C, C++, Python, or Rust (if no C or C++ experience) Experience developing applications that communicate with hardware devices, controllers, sensors, or industrial equipment Ability to diagnose and resolve software and hardware integration issues Ability to learn new languages and technologies Strong problem-solving skills and attention to detail Excellent communication skills Ability to work with others to meet established goals and program schedules Responsibilities:Develop and maintain software applications that interface with hardware systems Design, implement, and test device communication and control functionality Troubleshoot software, hardware, and integration issues Collaborate with engineering and technical teams to deliver reliable solutions Participate in code reviews, documentation, and continuous improvement initiatives Preferred Skills and Experience:Knowledge of hardware interfaces and robotics Experience with computer vision Experience developing code for Navy or DoD systems
09/24/2026
Full time
Requirements:3-8 years of software development experience Proficiency in one or more programming languages such as C, C++, Python, or Rust (if no C or C++ experience) Experience developing applications that communicate with hardware devices, controllers, sensors, or industrial equipment Ability to diagnose and resolve software and hardware integration issues Ability to learn new languages and technologies Strong problem-solving skills and attention to detail Excellent communication skills Ability to work with others to meet established goals and program schedules Responsibilities:Develop and maintain software applications that interface with hardware systems Design, implement, and test device communication and control functionality Troubleshoot software, hardware, and integration issues Collaborate with engineering and technical teams to deliver reliable solutions Participate in code reviews, documentation, and continuous improvement initiatives Preferred Skills and Experience:Knowledge of hardware interfaces and robotics Experience with computer vision Experience developing code for Navy or DoD systems
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
09/24/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on AHRS and INS products using the latest advances in sensor technologies. You'll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field.You have a minimum of 10 years of experience designing embedded software in the U.S.You have a minimum of 5 years of experience as principal designer for AHRS and INS solutions.You have a minimum of 5 years of experience characterizing and calibrating inertial sensor devices.You have the ability to work directly with target hardware, including lab bench equipment, other tools for debugging and analysis.You have proficiency programming in C.You are proficient with Microsoft Office.You have strong attention to detail.You are organized, focused, and results oriented.You are a problem-solver with critical thinking and prioritizing skills.You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, C++, or Python languages for PC application software.You have experience with VHDL.You have experience designing safety-critical software, utilizing RTCA DO-178, DO-254 or similar processes.You have experience designing or troubleshooting PCB system hardware.You have experience with Design for Manufacture and Design for Test (DFM & DFT). WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systemsArchitect and implement ARHS and INS products utilizing MEMS, FOG or other commercially available technologiesDesign tools to support manufacturing, calibration and verification of safety-critical productsBuild and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environmentsPrototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide above-market pay and a comprehensive benefits package.We promote an environment where you can excel in your career while maintaining a healthy work-life balance.Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment.We believe anything worth doing is worth doing right - every time.We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events.We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI299b141f47f7-5469
09/24/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on AHRS and INS products using the latest advances in sensor technologies. You'll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field.You have a minimum of 10 years of experience designing embedded software in the U.S.You have a minimum of 5 years of experience as principal designer for AHRS and INS solutions.You have a minimum of 5 years of experience characterizing and calibrating inertial sensor devices.You have the ability to work directly with target hardware, including lab bench equipment, other tools for debugging and analysis.You have proficiency programming in C.You are proficient with Microsoft Office.You have strong attention to detail.You are organized, focused, and results oriented.You are a problem-solver with critical thinking and prioritizing skills.You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, C++, or Python languages for PC application software.You have experience with VHDL.You have experience designing safety-critical software, utilizing RTCA DO-178, DO-254 or similar processes.You have experience designing or troubleshooting PCB system hardware.You have experience with Design for Manufacture and Design for Test (DFM & DFT). WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systemsArchitect and implement ARHS and INS products utilizing MEMS, FOG or other commercially available technologiesDesign tools to support manufacturing, calibration and verification of safety-critical productsBuild and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environmentsPrototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide above-market pay and a comprehensive benefits package.We promote an environment where you can excel in your career while maintaining a healthy work-life balance.Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment.We believe anything worth doing is worth doing right - every time.We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events.We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI299b141f47f7-5469
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
09/24/2026
Full time
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
Date Posted: 2026-09-03 Country: United States of America Location: US-MA-TEWKSBURY-TB1 50 Apple Hill Dr ASSABET BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX. What You Will Do The Systems Engineering and Test Capabilities discipline seeks talented Systems Engineers. Our team, located in Tewksbury, MA & Woburn, MA, integrates hardware and software, develops test plans and procedures, debugs and evaluates system functions and interfaces, and verifies system requirements in support of final sell-off to the customer. We put our systems together, exercise them in the lab or in the field, measure and analyze performance, and make sure our products work the first time and every time. Every day is a different set of challenges to overcome. You'll be expected to collaborate across disciplines and partner to implement solutions. In this role, you'll get to know a little bit about every aspect of the system and have a direct hand in making it all work together supporting teams of engineers engaged in integration and test efforts. You will support elements of program development, engineering testing, integration, flight-testing, production, system deployment, and/or post deployment support across the product lifecycle. This position is an onsite role near Tewksbury, MA. Test event support activity may require travel which is not expected to exceed 20%. Support engineering activities related to testing and troubleshooting of hardware and software Functional analysis of real world and test data; trade studies to bring advanced features to fielded system Support troubleshooting and failure data analyses, including root cause and corrective action processes and advanced use of lab or field test equipment System integration and test support, possibly including live fire test events Support activity may require travel Complete and compile detailed performance evaluations, including the use of analysis tools, such as MATLAB Support qualification of our products Sustainment/Depot returns and repair Maintain engineering specifications (DS, ARD, etc.) & drawing (Schematics & Assembly Drawings) Prepare and present results in reports and briefings to internal or external stakeholders Maintain engineering databases Participate in periodic team meetings, interface teleconference meetings, working group meetings Qualifications You Must Have Master's degree in or related Science, Technology, Engineering or Mathematics (STEM) major obtained by start date. Experience with troubleshooting technical issues in an academic or internship setting, including the use of common commercial test equipment (oscilloscope, spectrum analyzer, etc.) Experience may be obtained through on-the-job experience, research, coursework, or projects Qualifications We Prefer Strong undergraduate level understanding of electrical, mechanical and/or software system integration, familiarity with C/C++/C# preferred Experience with or exposure to various military platforms such as ships, ground combat systems, fixed and rotary wing aircraft Experience with tools, such as MATLAB or Python scripting, for instrumentation and collection of large data sets, data analysis and automation Experience with electrical schematics, interface control documentation, and communications protocols What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
09/24/2026
Full time
Date Posted: 2026-09-03 Country: United States of America Location: US-MA-TEWKSBURY-TB1 50 Apple Hill Dr ASSABET BLDG Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX. What You Will Do The Systems Engineering and Test Capabilities discipline seeks talented Systems Engineers. Our team, located in Tewksbury, MA & Woburn, MA, integrates hardware and software, develops test plans and procedures, debugs and evaluates system functions and interfaces, and verifies system requirements in support of final sell-off to the customer. We put our systems together, exercise them in the lab or in the field, measure and analyze performance, and make sure our products work the first time and every time. Every day is a different set of challenges to overcome. You'll be expected to collaborate across disciplines and partner to implement solutions. In this role, you'll get to know a little bit about every aspect of the system and have a direct hand in making it all work together supporting teams of engineers engaged in integration and test efforts. You will support elements of program development, engineering testing, integration, flight-testing, production, system deployment, and/or post deployment support across the product lifecycle. This position is an onsite role near Tewksbury, MA. Test event support activity may require travel which is not expected to exceed 20%. Support engineering activities related to testing and troubleshooting of hardware and software Functional analysis of real world and test data; trade studies to bring advanced features to fielded system Support troubleshooting and failure data analyses, including root cause and corrective action processes and advanced use of lab or field test equipment System integration and test support, possibly including live fire test events Support activity may require travel Complete and compile detailed performance evaluations, including the use of analysis tools, such as MATLAB Support qualification of our products Sustainment/Depot returns and repair Maintain engineering specifications (DS, ARD, etc.) & drawing (Schematics & Assembly Drawings) Prepare and present results in reports and briefings to internal or external stakeholders Maintain engineering databases Participate in periodic team meetings, interface teleconference meetings, working group meetings Qualifications You Must Have Master's degree in or related Science, Technology, Engineering or Mathematics (STEM) major obtained by start date. Experience with troubleshooting technical issues in an academic or internship setting, including the use of common commercial test equipment (oscilloscope, spectrum analyzer, etc.) Experience may be obtained through on-the-job experience, research, coursework, or projects Qualifications We Prefer Strong undergraduate level understanding of electrical, mechanical and/or software system integration, familiarity with C/C++/C# preferred Experience with or exposure to various military platforms such as ships, ground combat systems, fixed and rotary wing aircraft Experience with tools, such as MATLAB or Python scripting, for instrumentation and collection of large data sets, data analysis and automation Experience with electrical schematics, interface control documentation, and communications protocols What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Relocation Eligibility Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: 2026-05-07 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, Arizona Job Description: The Test Equipment Engineering (TEE) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TEE is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Senior Software Engineer with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS) Prioritize and handle multiple software engineering tasks concurrently Troubleshoot software and test equipment instrumentation Work in a multidiscipline engineering team environment Develop and derive requirements for software products Qualifications You Must Have: Typically requires a bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience, or an Advanced degree in a related field and minimum 3 years' experience. Five years' experience developing and integrating software applications using C, C#, C++ programming languages in a test environment, as well as Java, Python or Visual Basic. Experience with Windows Operating System and Microsoft Visual Studio is required. The ability to obtain and maintain a U.S. Government issued (Secret) security clearance is required before starting. U.S. citizenship is required, as only U.S. Citizens are eligible for a security clearance. Qualifications We Prefer: Familiar with computer architecture and computer hardware optimization techniques Working knowledge of the development of software drivers for the operation of computer hardware interfaces Working knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 Familiarity with laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters) Experience with Unified Modeling Language (UML) to visualize software architecture and design Experience of software development lifecycles, such as Waterfall and Agile Experience with Software Configuration Management principles Experience with Microsoft Azure DevOps Server or GitHub Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
09/24/2026
Full time
Date Posted: 2026-05-07 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, Arizona Job Description: The Test Equipment Engineering (TEE) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TEE is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Senior Software Engineer with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS) Prioritize and handle multiple software engineering tasks concurrently Troubleshoot software and test equipment instrumentation Work in a multidiscipline engineering team environment Develop and derive requirements for software products Qualifications You Must Have: Typically requires a bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience, or an Advanced degree in a related field and minimum 3 years' experience. Five years' experience developing and integrating software applications using C, C#, C++ programming languages in a test environment, as well as Java, Python or Visual Basic. Experience with Windows Operating System and Microsoft Visual Studio is required. The ability to obtain and maintain a U.S. Government issued (Secret) security clearance is required before starting. U.S. citizenship is required, as only U.S. Citizens are eligible for a security clearance. Qualifications We Prefer: Familiar with computer architecture and computer hardware optimization techniques Working knowledge of the development of software drivers for the operation of computer hardware interfaces Working knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 Familiarity with laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters) Experience with Unified Modeling Language (UML) to visualize software architecture and design Experience of software development lifecycles, such as Waterfall and Agile Experience with Software Configuration Management principles Experience with Microsoft Azure DevOps Server or GitHub Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Job Title: Specialist, Cyber Infrastructure Systems Engineer -System Administration Job Code: 44433 Job Location: Colorado Springs, CO Job Schedule: 5/8 - Employees work 8 hours per day - 5 days a week Job Description: We are seeking a skilled and experienced Cyber Infrastructure Systems Engineer (CISE) to join our Colorado Springs, CO team. This role requires an experience system administrator who will be responsible for the administration and maintenance of Windows-based servers and workstations across a DoD cleared enterprise environment. Duties include managing patching activities, monitoring system performance, and implementing system hardening measures to strengthen security, ensure compliance with organizational standards, and maintain operational reliability. The position also supports ongoing troubleshooting, vulnerability remediation, and continuous improvement of system configurations and processes. Essential Functions: Administer, maintain, and support Windows-based servers and workstations within a cleared enterprise or mission-critical DoD environment. Manage the deployment of operating system patches, security updates, and hotfixes in accordance with approved maintenance schedules and security requirements. Implement and sustain system hardening measures using applicable DoD security standards, STIGs, and organizational cybersecurity policies. Perform vulnerability identification and remediation activities to support compliance with RMF controls, POA&M tracking, and audit readiness efforts. Monitor system performance, availability, and operational health to ensure reliability and continuity of mission systems. Troubleshoot and resolve hardware, software, operating system, and access-related issues while adhering to established security procedures. Maintain accurate system configurations, change records, and technical documentation to support configuration management and compliance inspections. Coordinate with cybersecurity, network, and program teams to support accreditation activities, incident response, and secure system operations in classified or controlled environments. Qualifications: Bachelor's Degree with a minimum of 4 years of relevant experience, or Graduate Degree with a minimum of 2 years of relevant experience, or in lieu of a degree, a minimum of 8 years of prior related experience. Secret Clearance DoD 8570.01-M IAT Level 2 Required Professional Certifications: CCNA- Security, Security+ CE, or higher certification' Preferred Additional Skills: Experience serving as a DoD COMSEC Manager or supporting COMSEC account management, including handling, safeguarding, inventorying, and controlling cryptographic equipment and keying material in accordance with applicable DoD policies and procedures. Experience administering and supporting Red Hat Enterprise Linux (RHEL) systems in a DoD, federal, or other regulated environment, including patching, system hardening, user administration, and troubleshooting Utilizing virtualization technologies such as KVM, VMware, vSphere/vCenter, and microservices/containers (e.g., OpenShift, Docker) to enhance system functionality and efficiency In compliance with pay transparency requirements, the salary range for this role in Colorado state is $80,500-$149,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. The application window for this position will close on 11/10/2026.
09/24/2026
Full time
Job Title: Specialist, Cyber Infrastructure Systems Engineer -System Administration Job Code: 44433 Job Location: Colorado Springs, CO Job Schedule: 5/8 - Employees work 8 hours per day - 5 days a week Job Description: We are seeking a skilled and experienced Cyber Infrastructure Systems Engineer (CISE) to join our Colorado Springs, CO team. This role requires an experience system administrator who will be responsible for the administration and maintenance of Windows-based servers and workstations across a DoD cleared enterprise environment. Duties include managing patching activities, monitoring system performance, and implementing system hardening measures to strengthen security, ensure compliance with organizational standards, and maintain operational reliability. The position also supports ongoing troubleshooting, vulnerability remediation, and continuous improvement of system configurations and processes. Essential Functions: Administer, maintain, and support Windows-based servers and workstations within a cleared enterprise or mission-critical DoD environment. Manage the deployment of operating system patches, security updates, and hotfixes in accordance with approved maintenance schedules and security requirements. Implement and sustain system hardening measures using applicable DoD security standards, STIGs, and organizational cybersecurity policies. Perform vulnerability identification and remediation activities to support compliance with RMF controls, POA&M tracking, and audit readiness efforts. Monitor system performance, availability, and operational health to ensure reliability and continuity of mission systems. Troubleshoot and resolve hardware, software, operating system, and access-related issues while adhering to established security procedures. Maintain accurate system configurations, change records, and technical documentation to support configuration management and compliance inspections. Coordinate with cybersecurity, network, and program teams to support accreditation activities, incident response, and secure system operations in classified or controlled environments. Qualifications: Bachelor's Degree with a minimum of 4 years of relevant experience, or Graduate Degree with a minimum of 2 years of relevant experience, or in lieu of a degree, a minimum of 8 years of prior related experience. Secret Clearance DoD 8570.01-M IAT Level 2 Required Professional Certifications: CCNA- Security, Security+ CE, or higher certification' Preferred Additional Skills: Experience serving as a DoD COMSEC Manager or supporting COMSEC account management, including handling, safeguarding, inventorying, and controlling cryptographic equipment and keying material in accordance with applicable DoD policies and procedures. Experience administering and supporting Red Hat Enterprise Linux (RHEL) systems in a DoD, federal, or other regulated environment, including patching, system hardening, user administration, and troubleshooting Utilizing virtualization technologies such as KVM, VMware, vSphere/vCenter, and microservices/containers (e.g., OpenShift, Docker) to enhance system functionality and efficiency In compliance with pay transparency requirements, the salary range for this role in Colorado state is $80,500-$149,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. The application window for this position will close on 11/10/2026.
Technical Systems Integration Inc
Panama City Beach, Florida
Job Description Job Description Description: Technical Systems Integration, Inc. (TSI) is a Service-Disabled Veteran-Owned Small Business supporting the United States Navy and other Department of Defense customers. TSI provides logistics, engineering, and technical support services to naval warfare centers and program offices across the country. About the Role TSI is seeking a Configuration Manager to support mine warfare systems at Naval Surface Warfare Center Panama City Division (NSWC PCD). This is a hardware and technical documentation configuration management role: maintaining engineering baselines, supporting Configuration Control Board activities, and processing Engineering Change Proposals, Notices of Revision, and Physical Configuration Audits for fielded Navy systems. This is a documentation and change control position. Key Responsibilities Maintain configuration baselines for hardware and technical documentation in accordance with SAE EIA-649C, including Configuration Status Accounting reports using CMPro or an equivalent configuration management system. Review engineering drawings and technical data for compliance with Notices of Revision, support Physical Configuration Audits, and verify configuration items against approved baselines. Support Configuration Control Board activities, including agenda preparation, action item tracking, and coordination with Government representatives. Prepare and track engineering change documentation, including Engineering Change Proposals, Engineering Change Records, Ship or System Change Documents, and Technical Directives, and support associated impact analyses. Support processing of approved changes through the SHIPMAIN process for shipboard system alterations. Build and maintain configuration, alteration, and logistics data within the Model Based Product Support database, ensuring data integrity and traceability to the official Government system of record. Maintain the online technical library used to collect, store, and distribute technical data and engineering drawings. Assist in preparing and updating Configuration Management Plans and support program reviews, including In Process Reviews and Quarterly Program Reviews. Requirements: Required Qualifications Bachelor's degree in any field. Seven years of professional experience in configuration management in a military, government, or industry setting. Working knowledge of configuration management principles consistent with SAE EIA-649C. Experience with an enterprise configuration management system such as CMPro, Windchill, or an equivalent platform. Experience supporting a configuration change control board or an equivalent formal change review process. United States citizenship required. Must be able to obtain and maintain a Secret security clearance. Preferred Qualifications Prior experience supporting Navy, Army, or Air Force weapon system or equipment sustainment programs. Familiarity with NAVSEA Technical Specification 9090-700 (Model Based Product Support), CDMD-OA (Configuration Data Managers Database, formerly SCLSIS), or an equivalent Service level configuration and logistics data system. Experience with the SHIPMAIN process, or an equivalent Service modernization or installation process. Military background in Army Modification Work Orders or Air Force Time Compliance Technical Orders (Air Force Specialty Codes 2R1X1 or 2R2X1) directly translates to this position. Certified Configuration Manager (CCM) or equivalent professional certification. Compensation and Benefits Compensation: $60,000 to $62,000 yearly Benefits Medical, dental, and vision insurance, ninety percent company-paid. 401(k) retirement plan with company match. Paid time off and federal holidays. Life insurance and disability coverage. Professional development support and tuition assistance. Technical Systems Integration, Inc. is an Equal Opportunity Employer.
09/24/2026
Full time
Job Description Job Description Description: Technical Systems Integration, Inc. (TSI) is a Service-Disabled Veteran-Owned Small Business supporting the United States Navy and other Department of Defense customers. TSI provides logistics, engineering, and technical support services to naval warfare centers and program offices across the country. About the Role TSI is seeking a Configuration Manager to support mine warfare systems at Naval Surface Warfare Center Panama City Division (NSWC PCD). This is a hardware and technical documentation configuration management role: maintaining engineering baselines, supporting Configuration Control Board activities, and processing Engineering Change Proposals, Notices of Revision, and Physical Configuration Audits for fielded Navy systems. This is a documentation and change control position. Key Responsibilities Maintain configuration baselines for hardware and technical documentation in accordance with SAE EIA-649C, including Configuration Status Accounting reports using CMPro or an equivalent configuration management system. Review engineering drawings and technical data for compliance with Notices of Revision, support Physical Configuration Audits, and verify configuration items against approved baselines. Support Configuration Control Board activities, including agenda preparation, action item tracking, and coordination with Government representatives. Prepare and track engineering change documentation, including Engineering Change Proposals, Engineering Change Records, Ship or System Change Documents, and Technical Directives, and support associated impact analyses. Support processing of approved changes through the SHIPMAIN process for shipboard system alterations. Build and maintain configuration, alteration, and logistics data within the Model Based Product Support database, ensuring data integrity and traceability to the official Government system of record. Maintain the online technical library used to collect, store, and distribute technical data and engineering drawings. Assist in preparing and updating Configuration Management Plans and support program reviews, including In Process Reviews and Quarterly Program Reviews. Requirements: Required Qualifications Bachelor's degree in any field. Seven years of professional experience in configuration management in a military, government, or industry setting. Working knowledge of configuration management principles consistent with SAE EIA-649C. Experience with an enterprise configuration management system such as CMPro, Windchill, or an equivalent platform. Experience supporting a configuration change control board or an equivalent formal change review process. United States citizenship required. Must be able to obtain and maintain a Secret security clearance. Preferred Qualifications Prior experience supporting Navy, Army, or Air Force weapon system or equipment sustainment programs. Familiarity with NAVSEA Technical Specification 9090-700 (Model Based Product Support), CDMD-OA (Configuration Data Managers Database, formerly SCLSIS), or an equivalent Service level configuration and logistics data system. Experience with the SHIPMAIN process, or an equivalent Service modernization or installation process. Military background in Army Modification Work Orders or Air Force Time Compliance Technical Orders (Air Force Specialty Codes 2R1X1 or 2R2X1) directly translates to this position. Certified Configuration Manager (CCM) or equivalent professional certification. Compensation and Benefits Compensation: $60,000 to $62,000 yearly Benefits Medical, dental, and vision insurance, ninety percent company-paid. 401(k) retirement plan with company match. Paid time off and federal holidays. Life insurance and disability coverage. Professional development support and tuition assistance. Technical Systems Integration, Inc. is an Equal Opportunity Employer.
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on AHRS and INS products using the latest advances in sensor technologies. You'll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field.You have a minimum of 10 years of experience designing embedded software in the U.S.You have a minimum of 5 years of experience as principal designer for AHRS and INS solutions.You have a minimum of 5 years of experience characterizing and calibrating inertial sensor devices.You have the ability to work directly with target hardware, including lab bench equipment, other tools for debugging and analysis.You have proficiency programming in C.You are proficient with Microsoft Office.You have strong attention to detail.You are organized, focused, and results oriented.You are a problem-solver with critical thinking and prioritizing skills.You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, C++, or Python languages for PC application software.You have experience with VHDL.You have experience designing safety-critical software, utilizing RTCA DO-178, DO-254 or similar processes.You have experience designing or troubleshooting PCB system hardware.You have experience with Design for Manufacture and Design for Test (DFM & DFT). WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systemsArchitect and implement ARHS and INS products utilizing MEMS, FOG or other commercially available technologiesDesign tools to support manufacturing, calibration and verification of safety-critical productsBuild and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environmentsPrototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide above-market pay and a comprehensive benefits package.We promote an environment where you can excel in your career while maintaining a healthy work-life balance.Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment.We believe anything worth doing is worth doing right - every time.We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events.We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI299b141f47f7-5469
09/24/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will design avionics, power electronics, and battery systems with an emphasis on AHRS and INS products using the latest advances in sensor technologies. You'll create unique intellectual property to address the growing demand for software-defined behavior. You can expect a variety of opportunities ranging from products for cockpit displays, instruments and navigational references based on local and remote sensor inputs. Additional products include data conversion and storage, lithium battery management, AC and DC power conversion, and in-seat power solutions. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field.You have a minimum of 10 years of experience designing embedded software in the U.S.You have a minimum of 5 years of experience as principal designer for AHRS and INS solutions.You have a minimum of 5 years of experience characterizing and calibrating inertial sensor devices.You have the ability to work directly with target hardware, including lab bench equipment, other tools for debugging and analysis.You have proficiency programming in C.You are proficient with Microsoft Office.You have strong attention to detail.You are organized, focused, and results oriented.You are a problem-solver with critical thinking and prioritizing skills.You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, C++, or Python languages for PC application software.You have experience with VHDL.You have experience designing safety-critical software, utilizing RTCA DO-178, DO-254 or similar processes.You have experience designing or troubleshooting PCB system hardware.You have experience with Design for Manufacture and Design for Test (DFM & DFT). WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Design and implement embedded C software for bare-metal microcontroller-based systems with an option for VHDL firmware for FPGA-based systemsArchitect and implement ARHS and INS products utilizing MEMS, FOG or other commercially available technologiesDesign tools to support manufacturing, calibration and verification of safety-critical productsBuild and troubleshoot hardware, including basic soldering, operation of test equipment, and daily work in both office and test lab environmentsPrototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide above-market pay and a comprehensive benefits package.We promote an environment where you can excel in your career while maintaining a healthy work-life balance.Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment.We believe anything worth doing is worth doing right - every time.We have frequent events to keep work interesting. Our food drive is super impressive, we have an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives and frequent ticket raffles for local sporting and cultural events.We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI299b141f47f7-5469
Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PI1a60726f76cb-0987
09/24/2026
Full time
Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PI1a60726f76cb-0987
Altamira Material Solutions
Haverhill, Massachusetts
About Plastic Distributors & Fabricators, LLC (PDF) PDF is an ISO 9001 certified manufacturer specializing in CNC machined, fabricated, and thermoformed plastic components, as well as precision hardware integration. We are committed to quality, safety, and continuous improvement and take pride in delivering reliable, high-quality solutions to our customers. JOB SUMMARY: The CMM Programmer / Quality Inspector is responsible for the programming, setup, and operation of CMM to inspect manufactured parts. This role ensures all components meet engineering blueprints, customer specifications, and ISO quality standards by utilizing advanced metrology equipment and traditional precision inspection tools. ESSENTIAL FUNCTIONS: • Responsible for all programming of the CMM and inspection of manufactured products. • Creates efficient and effective programs and adjusts previously written programs for the CMM equipment. • Perform dimensional and visual inspection of manufactured products using CMM and other traditional tools. • Maintain accurate records of time worked by utilizing the payroll time clock system. • Adhere strictly to ISO inspection processes, internal quality procedures, and safety guidelines. • Communicates any finding, non-conformances, or issues to Quality Manager. • Adheres to all safety procedures and guidelines. ADDITIONAL RESPONSIBILITIES: • Other duties as assigned. JOB QUALIFICATIONS: • High School Diploma or GED from an accredited institution required. • 5+ years experience desired. • Demonstrated experience in CMM Programming and operation. • Ability to read and interpret blueprints and engineering specifications. • Hands-on experience with traditional measuring equipment (e.g.: micrometers, indicators, verniers, vision system, and pi tape) and sheet metal fabrication. • Strong Analytical skills to determine the proper tools and methods required for measuring complex parts. • Demonstrated experience in mechanical inspection and calibration. • Working knowledge of blue print reading, GD&T, SPC, and sampling plans. • Ability to do FPQ's, CAV's, PPAP's and layout Inspection forms as well as determine proper tools for measuring part. • ASQ certified is a plus. PHYSICAL REQUIREMENTS & WORK ENVIRONMENT: Regularly required to talk and hear to communicate effectively with team members and management. Frequently required to stand, walk, sit, and move around the manufacturing floor. Continually required to use hands to handle, feel, and operate precision measurement tools and CMM equipment. Must be able to occasionally lift and/or move objects weighing up to 30 pounds. The ambient noise level in the work environment is typically moderate, characteristic of a manufacturing or machine shop setting. Exposure to moving mechanical parts requires strict adherence to company safety. protocols, including the use of Personal Protective Equipment (PPE) where designated. Disclaimers & Notices This job posting provides the general nature and level of work expected in this role and is not intended to be an exhaustive list of responsibilities or qualifications. Management reserves the right to modify duties based on business need at any time with or without notice. Equal Employment Opportunity Statement Plastic Distributors & Fabricators, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected status under applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. No phone calls or recruiters. Compensation details: 30-38 Hourly Wage PId829d6c152f5-9073
09/23/2026
Full time
About Plastic Distributors & Fabricators, LLC (PDF) PDF is an ISO 9001 certified manufacturer specializing in CNC machined, fabricated, and thermoformed plastic components, as well as precision hardware integration. We are committed to quality, safety, and continuous improvement and take pride in delivering reliable, high-quality solutions to our customers. JOB SUMMARY: The CMM Programmer / Quality Inspector is responsible for the programming, setup, and operation of CMM to inspect manufactured parts. This role ensures all components meet engineering blueprints, customer specifications, and ISO quality standards by utilizing advanced metrology equipment and traditional precision inspection tools. ESSENTIAL FUNCTIONS: • Responsible for all programming of the CMM and inspection of manufactured products. • Creates efficient and effective programs and adjusts previously written programs for the CMM equipment. • Perform dimensional and visual inspection of manufactured products using CMM and other traditional tools. • Maintain accurate records of time worked by utilizing the payroll time clock system. • Adhere strictly to ISO inspection processes, internal quality procedures, and safety guidelines. • Communicates any finding, non-conformances, or issues to Quality Manager. • Adheres to all safety procedures and guidelines. ADDITIONAL RESPONSIBILITIES: • Other duties as assigned. JOB QUALIFICATIONS: • High School Diploma or GED from an accredited institution required. • 5+ years experience desired. • Demonstrated experience in CMM Programming and operation. • Ability to read and interpret blueprints and engineering specifications. • Hands-on experience with traditional measuring equipment (e.g.: micrometers, indicators, verniers, vision system, and pi tape) and sheet metal fabrication. • Strong Analytical skills to determine the proper tools and methods required for measuring complex parts. • Demonstrated experience in mechanical inspection and calibration. • Working knowledge of blue print reading, GD&T, SPC, and sampling plans. • Ability to do FPQ's, CAV's, PPAP's and layout Inspection forms as well as determine proper tools for measuring part. • ASQ certified is a plus. PHYSICAL REQUIREMENTS & WORK ENVIRONMENT: Regularly required to talk and hear to communicate effectively with team members and management. Frequently required to stand, walk, sit, and move around the manufacturing floor. Continually required to use hands to handle, feel, and operate precision measurement tools and CMM equipment. Must be able to occasionally lift and/or move objects weighing up to 30 pounds. The ambient noise level in the work environment is typically moderate, characteristic of a manufacturing or machine shop setting. Exposure to moving mechanical parts requires strict adherence to company safety. protocols, including the use of Personal Protective Equipment (PPE) where designated. Disclaimers & Notices This job posting provides the general nature and level of work expected in this role and is not intended to be an exhaustive list of responsibilities or qualifications. Management reserves the right to modify duties based on business need at any time with or without notice. Equal Employment Opportunity Statement Plastic Distributors & Fabricators, LLC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other protected status under applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role. No phone calls or recruiters. Compensation details: 30-38 Hourly Wage PId829d6c152f5-9073
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
09/23/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
Qualcomm is seeking a Senior Engineer to design and optimize advanced wireless and media solutions for 5G, IoT, and mobile platforms. In this role, you will architect, implement, and debug high performance software and/or silicon features, analyze system performance, and drive end to end optimization across modem, RF, and application layers. You will collaborate closely with cross functional global teams to translate product requirements into scalable designs, conduct simulations, code reviews, and lab validation, and ensure carrier grade reliability. This position suits engineers who thrive in an innovative, fast paced environment and want to shape next generation connectivity. Responsibilities Design and implement advanced wireless and media features for 5 G, Io T, and mobile platforms Architect scalable software and/or silicon solutions aligned with product requirements Analyze system performance and drive end to end optimization across modem, RF, and application layers Debug complex issues using lab tools, logs, and simulations to ensure carrier grade reliability Collaborate with cross functional global teams including hardware, firmware, and systems engineering Conduct code reviews, design reviews, and contribute to best engineering practices Develop and run simulations, test plans, and validation procedures for new features Document designs, interfaces, and performance results for internal and external stakeholders Required Skills Wireless communications (4 G/5 G, LTE, NR) C/C++ programming Embedded systems development System level performance analysis Signal processing fundamentals So C and modem architecture Python or scripting for automation Lab debugging tools and test equipment Version control (e.g., Git) Simulation and modeling tools (e.g., MATLAB)
09/23/2026
Full time
Qualcomm is seeking a Senior Engineer to design and optimize advanced wireless and media solutions for 5G, IoT, and mobile platforms. In this role, you will architect, implement, and debug high performance software and/or silicon features, analyze system performance, and drive end to end optimization across modem, RF, and application layers. You will collaborate closely with cross functional global teams to translate product requirements into scalable designs, conduct simulations, code reviews, and lab validation, and ensure carrier grade reliability. This position suits engineers who thrive in an innovative, fast paced environment and want to shape next generation connectivity. Responsibilities Design and implement advanced wireless and media features for 5 G, Io T, and mobile platforms Architect scalable software and/or silicon solutions aligned with product requirements Analyze system performance and drive end to end optimization across modem, RF, and application layers Debug complex issues using lab tools, logs, and simulations to ensure carrier grade reliability Collaborate with cross functional global teams including hardware, firmware, and systems engineering Conduct code reviews, design reviews, and contribute to best engineering practices Develop and run simulations, test plans, and validation procedures for new features Document designs, interfaces, and performance results for internal and external stakeholders Required Skills Wireless communications (4 G/5 G, LTE, NR) C/C++ programming Embedded systems development System level performance analysis Signal processing fundamentals So C and modem architecture Python or scripting for automation Lab debugging tools and test equipment Version control (e.g., Git) Simulation and modeling tools (e.g., MATLAB)
Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PI1a60726f76cb-0987
09/23/2026
Full time
Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PI1a60726f76cb-0987
