Job Description About the Role Pixels On Target is hiring a Senior Hardware Design Engineer to own board level design from concept through production. You'll architect reliable, high performance embedded hardware and partner closely with firmware, mechanical, and manufacturing teams to ship products at scale. Responsibilities Own board design end to end: requirements, architecture, component selection, schematics, layout constraints, DFM/DFT, prototyping, and release to manufacturing. Design multi layer, high density PCBs: impedance controlled routing, length matching, differential pairs, HDI (blind/buried vias), fine pitch/BGA packages. Build embedded platforms: microcontrollers/SoCs, memory (DDR/LPDDR), power delivery (PMICs, DC DCs, sequencing), peripherals and sensors. High speed I/O: architect and validate PCIe, USB 3.x, Ethernet, MIPI, LVDS, I2C, SPI, UART, CAN. Bring up & debug: lead hardware bring up with firmware; isolate issues using oscilloscopes, logic/spectrum analyzers, power analyzers, JTAG/SWD, and boundary scan. Verification (EVT/DVT/PVT): create and execute test plans for functionality, SI/PI, power/thermal, environmental and reliability; document results and drive fixes/ECOs. Optimize performance: analyze CPU, memory, I/O, and power budgets; tune for power consumption, thermal efficiency, stability, and cost. Compliance & quality: design for EMI/EMC and safety; coordinate pre scan and certification (e.g., FCC/CE/UL); ensure RoHS/REACH compliance. Manufacturing collaboration: work with CMs/EMS partners on stack ups, build reviews, test fixtures, yield improvements, and FA/RMA resolution. Technical leadership: run design reviews, mentor engineers, manage risks/schedules, and maintain crisp documentation in PLM/requirements tools. Required Qualifications 3+ years of board level hardware design experience shipping products (or equivalent). Proficiency with ECAD tools (Altium Designer, Cadence OrCAD/Allegro, or KiCad) and strong schematic/layout fundamentals. Proven experience with embedded system hardware (MCUs/SoCs, memory, PMICs) and low power techniques for battery or energy constrained devices. Solid grounding in signal and power integrity, impedance control, termination, decoupling, and clocking. Hands on lab skills for bring up, validation, and root cause analysis using standard bench equipment. Ability to write clear test plans, reports, and release documentation; fluency with ECOs and design controls. Effective collaboration with firmware, software, mechanical, thermal, and manufacturing teams. BS/MS in Electrical or Computer Engineering (or equivalent practical experience). Preferred Qualifications FPGA/CPLD experience (Verilog/VHDL). SI/PI and thermal simulation tools (e.g., HyperLynx, Sigrity, LTspice) and EMI/EMC mitigation techniques. Regulatory and reliability testing (e.g., IEC 62368, FCC Part 15, ESD IEC 61000 4 2, HALT/HASS). DFM/DFT/ATE, boundary scan (IEEE 1149.1/1149.6), ICT/flying probe, and functional test fixture development. Supply chain awareness: lifecycle/ALT sourcing, risk management, and cost optimization. Thermal management (heat sinks, airflow, interface materials, simulation). Linux/RTOS bring up familiarity and common boot/debug flows. Experience with PLM (e.g., Arena/Agile) and version control (e.g., Git).
10/27/2026
Full time
Job Description About the Role Pixels On Target is hiring a Senior Hardware Design Engineer to own board level design from concept through production. You'll architect reliable, high performance embedded hardware and partner closely with firmware, mechanical, and manufacturing teams to ship products at scale. Responsibilities Own board design end to end: requirements, architecture, component selection, schematics, layout constraints, DFM/DFT, prototyping, and release to manufacturing. Design multi layer, high density PCBs: impedance controlled routing, length matching, differential pairs, HDI (blind/buried vias), fine pitch/BGA packages. Build embedded platforms: microcontrollers/SoCs, memory (DDR/LPDDR), power delivery (PMICs, DC DCs, sequencing), peripherals and sensors. High speed I/O: architect and validate PCIe, USB 3.x, Ethernet, MIPI, LVDS, I2C, SPI, UART, CAN. Bring up & debug: lead hardware bring up with firmware; isolate issues using oscilloscopes, logic/spectrum analyzers, power analyzers, JTAG/SWD, and boundary scan. Verification (EVT/DVT/PVT): create and execute test plans for functionality, SI/PI, power/thermal, environmental and reliability; document results and drive fixes/ECOs. Optimize performance: analyze CPU, memory, I/O, and power budgets; tune for power consumption, thermal efficiency, stability, and cost. Compliance & quality: design for EMI/EMC and safety; coordinate pre scan and certification (e.g., FCC/CE/UL); ensure RoHS/REACH compliance. Manufacturing collaboration: work with CMs/EMS partners on stack ups, build reviews, test fixtures, yield improvements, and FA/RMA resolution. Technical leadership: run design reviews, mentor engineers, manage risks/schedules, and maintain crisp documentation in PLM/requirements tools. Required Qualifications 3+ years of board level hardware design experience shipping products (or equivalent). Proficiency with ECAD tools (Altium Designer, Cadence OrCAD/Allegro, or KiCad) and strong schematic/layout fundamentals. Proven experience with embedded system hardware (MCUs/SoCs, memory, PMICs) and low power techniques for battery or energy constrained devices. Solid grounding in signal and power integrity, impedance control, termination, decoupling, and clocking. Hands on lab skills for bring up, validation, and root cause analysis using standard bench equipment. Ability to write clear test plans, reports, and release documentation; fluency with ECOs and design controls. Effective collaboration with firmware, software, mechanical, thermal, and manufacturing teams. BS/MS in Electrical or Computer Engineering (or equivalent practical experience). Preferred Qualifications FPGA/CPLD experience (Verilog/VHDL). SI/PI and thermal simulation tools (e.g., HyperLynx, Sigrity, LTspice) and EMI/EMC mitigation techniques. Regulatory and reliability testing (e.g., IEC 62368, FCC Part 15, ESD IEC 61000 4 2, HALT/HASS). DFM/DFT/ATE, boundary scan (IEEE 1149.1/1149.6), ICT/flying probe, and functional test fixture development. Supply chain awareness: lifecycle/ALT sourcing, risk management, and cost optimization. Thermal management (heat sinks, airflow, interface materials, simulation). Linux/RTOS bring up familiarity and common boot/debug flows. Experience with PLM (e.g., Arena/Agile) and version control (e.g., Git).
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Systems Engineer Job Code: 42014 Job Location: Salt Lake City, Utah Job Schedule: 9/80-employees work 9 out of 14 days- totaling 80 hours worked- and have every other Friday off Job Description: L3Harris, Spectrum Superiority (S2) is seeking a highly experienced and accomplished Senior Specialist Diminishing Manufacturing Sources and Material Shortages (DMSMS) Systems Engineer to join our team in a leadership capacity. As a Senior Specialist DMSMS Systems Engineer, you will be responsible for leading complex obsolescence management initiatives, developing strategic mitigation approaches, and providing technical leadership across multiple programs and product lines at a customer reporting level. Your deep expertise in identifying alternative solutions, coordinating with suppliers and stakeholders, and ensuring continuity of supply will be crucial to maintaining the performance, reliability, and availability of our systems. This role requires technical background, strategic thinking, exceptional problem-solving abilities, and demonstrated leadership in guiding teams and influencing organizational DMSMS practices. Essential Functions: Lead the design and development of complex systems, ensuring alignment with specifications and requirements while mentoring Specialist and junior-level engineers. Serve as the technical lead in a multi-disciplined engineering development environment, managing time and resources across multiple concurrent programs with competing priorities. Lead and deliver technical presentations to customers, including stakeholders, during program reviews and design reviews. Plan, direct, and execute complex system integration and testing activities to validate system performance and functionality across multiple platforms. Lead the analysis and interpretation of customer requirements, translating them into detailed DMS reporting Develop and maintain comprehensive technical documentation, including system architectures, design specifications, test plans, and DMSMS management strategies. Collaborate with and provide leadership to cross-functional teams, including software, hardware, mechanical engineers, and supply chain personnel to achieve project goals. Ensure all system designs and implementations comply with relevant industry standards, regulatory requirements, and company best practices. Drive continuous improvement of systems engineering processes, DMSMS methodologies, and tools to enhance efficiency and effectiveness across the organization. Serve as primary technical point of contact for customers, addressing complex concerns and ensuring satisfaction with system performance and obsolescence management strategies. Lead project planning efforts, resource allocation, risk management, and milestone tracking to ensure timely completion of project objectives. Develop and implement proactive DMSMS strategies and roadmaps for long-term program sustainability. Mentor and provide technical guidance to Specialist-level and junior engineers in DMSMS practices and systems engineering principles. Due to the nature of our work, qualified candidates must have or be able to obtain and maintain a DoD security clearance. Ability to obtain and maintain an active secret security clearance (or higher if needed) Qualifications: Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 12 years of prior related experience. Preferred Additional Skills: Minimum of 5 years of proven experience in DMSMS management, obsolescence mitigation/systems engineering/project management experience. Expert-level knowledge of DMSMS principles, industry standards (e.g., SAE-ARP-6272, GEIA-STD-0010), government standards (SD-22, MIL-STD-3018), and best practices for mitigating obsolescence risks. Expert proficiency in using DMSMS management tools, databases, and software applications (e.g., IHS Markit, Silicon Expert, GIDEP, etc) Exceptional communication skills, both written and verbal, with proven ability to effectively lead cross-functional teams, influence stakeholders, and communicate complex technical concepts to diverse audiences including executive leadership. Strong organizational and project management skills with demonstrated ability to lead multiple complex projects simultaneously, manage competing priorities, and consistently meet critical deadlines. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
10/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Systems Engineer Job Code: 42014 Job Location: Salt Lake City, Utah Job Schedule: 9/80-employees work 9 out of 14 days- totaling 80 hours worked- and have every other Friday off Job Description: L3Harris, Spectrum Superiority (S2) is seeking a highly experienced and accomplished Senior Specialist Diminishing Manufacturing Sources and Material Shortages (DMSMS) Systems Engineer to join our team in a leadership capacity. As a Senior Specialist DMSMS Systems Engineer, you will be responsible for leading complex obsolescence management initiatives, developing strategic mitigation approaches, and providing technical leadership across multiple programs and product lines at a customer reporting level. Your deep expertise in identifying alternative solutions, coordinating with suppliers and stakeholders, and ensuring continuity of supply will be crucial to maintaining the performance, reliability, and availability of our systems. This role requires technical background, strategic thinking, exceptional problem-solving abilities, and demonstrated leadership in guiding teams and influencing organizational DMSMS practices. Essential Functions: Lead the design and development of complex systems, ensuring alignment with specifications and requirements while mentoring Specialist and junior-level engineers. Serve as the technical lead in a multi-disciplined engineering development environment, managing time and resources across multiple concurrent programs with competing priorities. Lead and deliver technical presentations to customers, including stakeholders, during program reviews and design reviews. Plan, direct, and execute complex system integration and testing activities to validate system performance and functionality across multiple platforms. Lead the analysis and interpretation of customer requirements, translating them into detailed DMS reporting Develop and maintain comprehensive technical documentation, including system architectures, design specifications, test plans, and DMSMS management strategies. Collaborate with and provide leadership to cross-functional teams, including software, hardware, mechanical engineers, and supply chain personnel to achieve project goals. Ensure all system designs and implementations comply with relevant industry standards, regulatory requirements, and company best practices. Drive continuous improvement of systems engineering processes, DMSMS methodologies, and tools to enhance efficiency and effectiveness across the organization. Serve as primary technical point of contact for customers, addressing complex concerns and ensuring satisfaction with system performance and obsolescence management strategies. Lead project planning efforts, resource allocation, risk management, and milestone tracking to ensure timely completion of project objectives. Develop and implement proactive DMSMS strategies and roadmaps for long-term program sustainability. Mentor and provide technical guidance to Specialist-level and junior engineers in DMSMS practices and systems engineering principles. Due to the nature of our work, qualified candidates must have or be able to obtain and maintain a DoD security clearance. Ability to obtain and maintain an active secret security clearance (or higher if needed) Qualifications: Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 12 years of prior related experience. Preferred Additional Skills: Minimum of 5 years of proven experience in DMSMS management, obsolescence mitigation/systems engineering/project management experience. Expert-level knowledge of DMSMS principles, industry standards (e.g., SAE-ARP-6272, GEIA-STD-0010), government standards (SD-22, MIL-STD-3018), and best practices for mitigating obsolescence risks. Expert proficiency in using DMSMS management tools, databases, and software applications (e.g., IHS Markit, Silicon Expert, GIDEP, etc) Exceptional communication skills, both written and verbal, with proven ability to effectively lead cross-functional teams, influence stakeholders, and communicate complex technical concepts to diverse audiences including executive leadership. Strong organizational and project management skills with demonstrated ability to lead multiple complex projects simultaneously, manage competing priorities, and consistently meet critical deadlines. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
What you will do We are seeking a Manufacturing IT Platform Engineer with 5 or more years of traditional software development hands-on experience using AI-assisted development tools (e.g., Claude.ai, ChatGPT, GitHub Copilot). This role builds standardized and reusable manufacturing solutions, including integrations, manufacturing data platforms, that can be deployed and supported across plants using Kubernetes and containers. This role is ideal for an engineer who wants to build real systems used in the manufacturing, leverage AI tools to accelerate development, and grow into a strong manufacturing platform contributor. How you will do it Design and develop services supporting manufacturing use cases such as production events, quality data, and traceability. Build manufacturing data pipelines and APIs for real-time and near real time shop-floor data. Develop and maintain edge-deployed applications that interface with plant systems. Use AI development tools (Claude.ai, Copilot studio) for: Code generation and refactoring Test creation and debugging Documentation and design acceleration Containerize applications using Docker and deploy using Kubernetes (on prem or edge environments). Support plant systems. Collaborate with senior engineers and architects to improve reliability, scalability, and usability of the manufacturing platform. What we look for Required 5 or more years of traditional software development experience in Manufacturing. 1 or more years of experience using AI tools for software development. Strong coding skills in Python, Java, Node.js, or .NET. Experience building and consuming REST APIs and data services. Hands-on experience with Docker containers. Working knowledge of Kubernetes concepts (pods, deployments, services). Basic understanding of manufacturing or industrial systems. Preferred Exposure to MoM/MES, SCADA, Historian, or IoT systems. Experience with event-driven or streaming architectures (e.g., MQTT, pub/sub concepts). Any experience deploying applications to edge or on-prem environments. Familiarity with CI/CD pipelines and DevOps practices. Experience with manufacturing and shop-floor systems. Comfortable combining traditional engineering skills with AI-assisted development. Product-oriented mindset-focused on reusable, scalable solutions. Willingness to support plant users and learn from operational feedback. Meadowbrook - Lithium Ion Our Meadowbrook, Michigan plant produces lithium-ion batteries and runs a research lab. We began operations in 2010 and now employ more than 110 people and operate six days per week. We're mindful of the profound impact we have on our planet and are proud to operate in a LEED Gold Certified facility. Our employees are actively involved in the community and volunteer for a variety of local organizations. What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2026's Most Ethical Companies by Ethisphere. This prestigious recognition marks the fourth consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
10/27/2026
Full time
What you will do We are seeking a Manufacturing IT Platform Engineer with 5 or more years of traditional software development hands-on experience using AI-assisted development tools (e.g., Claude.ai, ChatGPT, GitHub Copilot). This role builds standardized and reusable manufacturing solutions, including integrations, manufacturing data platforms, that can be deployed and supported across plants using Kubernetes and containers. This role is ideal for an engineer who wants to build real systems used in the manufacturing, leverage AI tools to accelerate development, and grow into a strong manufacturing platform contributor. How you will do it Design and develop services supporting manufacturing use cases such as production events, quality data, and traceability. Build manufacturing data pipelines and APIs for real-time and near real time shop-floor data. Develop and maintain edge-deployed applications that interface with plant systems. Use AI development tools (Claude.ai, Copilot studio) for: Code generation and refactoring Test creation and debugging Documentation and design acceleration Containerize applications using Docker and deploy using Kubernetes (on prem or edge environments). Support plant systems. Collaborate with senior engineers and architects to improve reliability, scalability, and usability of the manufacturing platform. What we look for Required 5 or more years of traditional software development experience in Manufacturing. 1 or more years of experience using AI tools for software development. Strong coding skills in Python, Java, Node.js, or .NET. Experience building and consuming REST APIs and data services. Hands-on experience with Docker containers. Working knowledge of Kubernetes concepts (pods, deployments, services). Basic understanding of manufacturing or industrial systems. Preferred Exposure to MoM/MES, SCADA, Historian, or IoT systems. Experience with event-driven or streaming architectures (e.g., MQTT, pub/sub concepts). Any experience deploying applications to edge or on-prem environments. Familiarity with CI/CD pipelines and DevOps practices. Experience with manufacturing and shop-floor systems. Comfortable combining traditional engineering skills with AI-assisted development. Product-oriented mindset-focused on reusable, scalable solutions. Willingness to support plant users and learn from operational feedback. Meadowbrook - Lithium Ion Our Meadowbrook, Michigan plant produces lithium-ion batteries and runs a research lab. We began operations in 2010 and now employ more than 110 people and operate six days per week. We're mindful of the profound impact we have on our planet and are proud to operate in a LEED Gold Certified facility. Our employees are actively involved in the community and volunteer for a variety of local organizations. What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, and Employee Assistance Program Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2026's Most Ethical Companies by Ethisphere. This prestigious recognition marks the fourth consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. Equal Employment Opportunity: We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, status as a protected veteran or other protected characteristics protected by law. As a federal contractor, we are committed to not discriminating against any applicant or employee based on these protected statuses. We will also take affirmative action to ensure equal employment opportunities. Please let us know if you require accommodations during the interview process by emailing . We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, and all characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report . We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To All Recruitment Agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a Propulsion & Fuel System Engineer (Mid-Level or Senior) to join the 787 Propulsion Charleston Team in North Charleston, SC. This role combines engineering analysis, systems integration, and hands-on factory and delivery support at our Charleston final assembly and delivery centers and Charleston Propulsion center. You'll work in a collaborative, multidisciplinary, agile environment using modern tools and practices, with strong opportunities for technical and leadership professional development. In addition, you will contribute to critical aircraft programs that directly affect safety, performance, and quality of customer aircraft deliveries. Help shape Fuel System performance and integration solutions, working closely with our engine and system suppliers to support production and delivery of 787 aircraft. Work with a supportive, innovative, and solution driven team focused on serving our customers and delivering products that connect people around the world. Our team is currently hiring for a broad range of experience levels including Mid-Level (Level 3) or Senior (Level 4) System Engineers. Primary Responsibilities: Lead integration of propulsion and fuel system changes across airplane systems, developing robust design solutions to support product improvements Plan, oversee, review, and approve engineering products and deliverables for the team, ensuring safety, quality, and timeliness Maintain Boeing design oversight for supplier provided fuel system components; review and approve supplier drawings, engineering change proposals, and configuration updates Engage suppliers to define, plan, and execute qualification testing and manage supplier initiated design modifications Manage Boeing Specification Control Document (SCD) requirements, including revisions and new SCD development Provide on site factory and delivery support in North Charleston: troubleshoot fuel system issues on the production line, support production holds, perform pre delivery inspections, and assist with delivery acceptance Investigate and resolve fleet, production, and supplier issues (Service Requests, Notices of Escape, Non Conformances, Engineering Liaison Requests, Change Notices, etc.) to maintain production flow and delivery schedules Coordinate, develop, and publish test plans, procedures, and reports; analyze test, certification, and production data to support timely dispositions Analyze system performance data to support safety, compliance, and airworthiness investigations; create and update system safety analyses and airworthiness limitations for the 787 Coordinate across internal partners (Electromagnetic Effects (EME), Reliability Maintainability and Testability (RM&T), Airplane Safety Engineering (ASE), Structures/Stress, Flight Test, Service Engineering, Production, Ground Ops, Regulatory Administration, etc.) to meet project goals and aircraft delivery milestones Communicate project status, risks, issues, and opportunities to Propulsion and Program leadership; represent Boeing professionally with suppliers, delivery teams, and external partners Work with general supervision, self directing activities based on customer, product, and stakeholder needs Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of experience working in an engineering discipline Willing and able to travel 10-20% of the time, both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): Level 4: 9+ years of experience working in an engineering discipline application. 3+ years of experience in Propulsion Engineering Ability to lead a team, including training and mentoring more junior engineers who will contribute to the team's success. Demonstrated ability to understand and resolve complex engine installation and integration problems across structural, systems, and certification domains. Experience leading system integration, supplier oversight, and technical decision making in aerospace or related industries. Proven ability to plan and execute qualification testing, produce technical documentation (interface drawings, installation reports, test procedures), and manage configuration and requirements. Knowledge of airplane safety, certification, and applicable regulations. Knowledge of Aircraft Fuel System equipment design, development, & certification, and Understanding of the principles of fluid mechanics. Experience working Continued Operational Safety Program (COSP) process. Familiar with ENOVIA, CSDT, REDARS, ETAC, IVX, IVT, CATIA (PDM, MatLab, Velocity a plus) Familiar with establishing RCCAs/BPSMs/fault trees/cause maps Able to work effectively with the entire value stream to accomplish desired results Understanding of large transport category aircraft certification process is preferred Experience with 14-CFR-Part 25 certification Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level (Level 3): $112,200 - $151,800 Senior (Level 4): $136,850 - $185,150 Applications for this position will be accepted until Nov. 09, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
10/27/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a Propulsion & Fuel System Engineer (Mid-Level or Senior) to join the 787 Propulsion Charleston Team in North Charleston, SC. This role combines engineering analysis, systems integration, and hands-on factory and delivery support at our Charleston final assembly and delivery centers and Charleston Propulsion center. You'll work in a collaborative, multidisciplinary, agile environment using modern tools and practices, with strong opportunities for technical and leadership professional development. In addition, you will contribute to critical aircraft programs that directly affect safety, performance, and quality of customer aircraft deliveries. Help shape Fuel System performance and integration solutions, working closely with our engine and system suppliers to support production and delivery of 787 aircraft. Work with a supportive, innovative, and solution driven team focused on serving our customers and delivering products that connect people around the world. Our team is currently hiring for a broad range of experience levels including Mid-Level (Level 3) or Senior (Level 4) System Engineers. Primary Responsibilities: Lead integration of propulsion and fuel system changes across airplane systems, developing robust design solutions to support product improvements Plan, oversee, review, and approve engineering products and deliverables for the team, ensuring safety, quality, and timeliness Maintain Boeing design oversight for supplier provided fuel system components; review and approve supplier drawings, engineering change proposals, and configuration updates Engage suppliers to define, plan, and execute qualification testing and manage supplier initiated design modifications Manage Boeing Specification Control Document (SCD) requirements, including revisions and new SCD development Provide on site factory and delivery support in North Charleston: troubleshoot fuel system issues on the production line, support production holds, perform pre delivery inspections, and assist with delivery acceptance Investigate and resolve fleet, production, and supplier issues (Service Requests, Notices of Escape, Non Conformances, Engineering Liaison Requests, Change Notices, etc.) to maintain production flow and delivery schedules Coordinate, develop, and publish test plans, procedures, and reports; analyze test, certification, and production data to support timely dispositions Analyze system performance data to support safety, compliance, and airworthiness investigations; create and update system safety analyses and airworthiness limitations for the 787 Coordinate across internal partners (Electromagnetic Effects (EME), Reliability Maintainability and Testability (RM&T), Airplane Safety Engineering (ASE), Structures/Stress, Flight Test, Service Engineering, Production, Ground Ops, Regulatory Administration, etc.) to meet project goals and aircraft delivery milestones Communicate project status, risks, issues, and opportunities to Propulsion and Program leadership; represent Boeing professionally with suppliers, delivery teams, and external partners Work with general supervision, self directing activities based on customer, product, and stakeholder needs Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of experience working in an engineering discipline Willing and able to travel 10-20% of the time, both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): Level 4: 9+ years of experience working in an engineering discipline application. 3+ years of experience in Propulsion Engineering Ability to lead a team, including training and mentoring more junior engineers who will contribute to the team's success. Demonstrated ability to understand and resolve complex engine installation and integration problems across structural, systems, and certification domains. Experience leading system integration, supplier oversight, and technical decision making in aerospace or related industries. Proven ability to plan and execute qualification testing, produce technical documentation (interface drawings, installation reports, test procedures), and manage configuration and requirements. Knowledge of airplane safety, certification, and applicable regulations. Knowledge of Aircraft Fuel System equipment design, development, & certification, and Understanding of the principles of fluid mechanics. Experience working Continued Operational Safety Program (COSP) process. Familiar with ENOVIA, CSDT, REDARS, ETAC, IVX, IVT, CATIA (PDM, MatLab, Velocity a plus) Familiar with establishing RCCAs/BPSMs/fault trees/cause maps Able to work effectively with the entire value stream to accomplish desired results Understanding of large transport category aircraft certification process is preferred Experience with 14-CFR-Part 25 certification Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level (Level 3): $112,200 - $151,800 Senior (Level 4): $136,850 - $185,150 Applications for this position will be accepted until Nov. 09, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for a Flight Simulation Software Engineer (Associate, Experienced, and Senior) to join the Flight Simulation I Labs team located in Dayton Beach, FL. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. The roles will involve software development for tools and models within our simulation infrastructure in the Flight Simulation Labs organization. Selected candidates will be aligned to a statement of work that best suits their interests and skillset, some of which could include: Creating core simulation infrastructure to serve as a baseline for programs developing flight simulation capabilities Developing tools to simulate, monitor, and control digital messages between subsystems in a lab environment Support modeling of various aircraft capabilities and subsystems Supporting the ability to run constructive scenarios in a testing environment for development of our products and to support training efforts Daytona Beach is the company's newest state-of-the-art facility focused on engineering excellence. Florida offers no state income tax and a variety of other desirable personal and financial benefits. To learn more, take a look at our video: L64OLWgM Our team is currently hiring for a broad range of experience levels including: Associate, Experienced, and Senior Engineers. Position Responsibilities: Develops, documents and maintains architecture, requirements, algorithms, interfaces and designs for simulation software systems Develops and maintains code and integrates software components into a fully functional software system Develop simulation environments to support testing performed by Mission Systems engineers Works on an agile team in order to accomplish team goals Executes and documents software research and development projects Works under general direction Basic Qualifications (Required Skills/ Experience): Bachelor's Degree Ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. Ability to obtain Secret U.S. Security clearance (Post-Start) 2+ years of professional experience programming in C++ 2+ years of experience as a Software Engineer Preferred Qualifications (Desired Skills/Experience): Associate / Level 2: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 2+ years of related work experience OR Bachelor's Degree and 6+ years of directly related work experience OR 10+ years of related, relevant experience Experienced / Level 3: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 5+ years of related work experience OR Bachelor's Degree and 9+ years of directly related work experience OR 13+ years of related, relevant experience Senior / Level 4: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 9+ years of related work experience OR Bachelor's Degree and 13+ years of directly related work experience OR 17+ years of related, relevant experience 2+ years of experience programming in C, C#, Python, Java, or Ada (or an equivalent combination of technical education and experience) Experience in Modeling and Simulation Experience in the defense or avionics industry Experience working on an Agile team using Agile methodologies and tools Strong coordination and communication skills Ability to work effectively in a fast-paced, collaborative team environment Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate: $92,650.00 - $125,350.00 Summary pay range for Experienced: $118,150.00 - $159,850.00. Summary pay range for Senior: $149,600.00 - $202,400.00. Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until Nov. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
10/27/2026
Full time
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for a Flight Simulation Software Engineer (Associate, Experienced, and Senior) to join the Flight Simulation I Labs team located in Dayton Beach, FL. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization. The roles will involve software development for tools and models within our simulation infrastructure in the Flight Simulation Labs organization. Selected candidates will be aligned to a statement of work that best suits their interests and skillset, some of which could include: Creating core simulation infrastructure to serve as a baseline for programs developing flight simulation capabilities Developing tools to simulate, monitor, and control digital messages between subsystems in a lab environment Support modeling of various aircraft capabilities and subsystems Supporting the ability to run constructive scenarios in a testing environment for development of our products and to support training efforts Daytona Beach is the company's newest state-of-the-art facility focused on engineering excellence. Florida offers no state income tax and a variety of other desirable personal and financial benefits. To learn more, take a look at our video: L64OLWgM Our team is currently hiring for a broad range of experience levels including: Associate, Experienced, and Senior Engineers. Position Responsibilities: Develops, documents and maintains architecture, requirements, algorithms, interfaces and designs for simulation software systems Develops and maintains code and integrates software components into a fully functional software system Develop simulation environments to support testing performed by Mission Systems engineers Works on an agile team in order to accomplish team goals Executes and documents software research and development projects Works under general direction Basic Qualifications (Required Skills/ Experience): Bachelor's Degree Ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. Ability to obtain Secret U.S. Security clearance (Post-Start) 2+ years of professional experience programming in C++ 2+ years of experience as a Software Engineer Preferred Qualifications (Desired Skills/Experience): Associate / Level 2: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 2+ years of related work experience OR Bachelor's Degree and 6+ years of directly related work experience OR 10+ years of related, relevant experience Experienced / Level 3: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 5+ years of related work experience OR Bachelor's Degree and 9+ years of directly related work experience OR 13+ years of related, relevant experience Senior / Level 4: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 9+ years of related work experience OR Bachelor's Degree and 13+ years of directly related work experience OR 17+ years of related, relevant experience 2+ years of experience programming in C, C#, Python, Java, or Ada (or an equivalent combination of technical education and experience) Experience in Modeling and Simulation Experience in the defense or avionics industry Experience working on an Agile team using Agile methodologies and tools Strong coordination and communication skills Ability to work effectively in a fast-paced, collaborative team environment Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate: $92,650.00 - $125,350.00 Summary pay range for Experienced: $118,150.00 - $159,850.00. Summary pay range for Senior: $149,600.00 - $202,400.00. Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until Nov. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Southwest Research Institute - Students
San Antonio, Texas
GRADUATE STUDENT-R&D - STUDENT ANALYST - Space Data Systems 15-01710 Who We Are: Space Data Systems is a CMMI-DEV V2.0 ML2/CL2 appraised high-performance software engineering team that empowers exploration by creating capable, sustainable software using proven technologies and effective software engineering processes in a people-focused work environment. Objectives of this Role: Work with small teams to develop, test, and deploy Java web applications to support a variety of NASA/ESA space missions. Department web applications support space missions by providing tools for planning mission activities, instrument telemetry data management, spaceflight operations tools, and space manufacturing support. Local year-round undergraduate Senior or Graduate student position. Daily and Monthly Responsibilities: Assist with the development and testing of new software functions in Java. Work with a team to create and improve existing web applications with Spring, JavaScript, jQuery, AJAX, and CSS. Write SQL to work with MariaDB and other databases. Collaborate with scientists and engineers to plan new features and review products in development. Requirements: Must be pursuing a Bachelors or a Masters degree in Computer Science. Undergraduate students must be rising seniors. 0 years: Academic or project-based experience with Java or either C++, C#, Groovy, or Scala and willingness to learn Java is required. Industry internship experience with Spring, JavaScript, jQuery, AJAX, JSP, Servlet, or SQL (Oracle or MySQL) is a plus. A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Space Science home page. An Equal Employment Opportunity Employer: race, color, religion, sex, national origin, disability, and veteran status. If you need assistance with completing the application, please Contact Us Back To Top
10/27/2026
Full time
GRADUATE STUDENT-R&D - STUDENT ANALYST - Space Data Systems 15-01710 Who We Are: Space Data Systems is a CMMI-DEV V2.0 ML2/CL2 appraised high-performance software engineering team that empowers exploration by creating capable, sustainable software using proven technologies and effective software engineering processes in a people-focused work environment. Objectives of this Role: Work with small teams to develop, test, and deploy Java web applications to support a variety of NASA/ESA space missions. Department web applications support space missions by providing tools for planning mission activities, instrument telemetry data management, spaceflight operations tools, and space manufacturing support. Local year-round undergraduate Senior or Graduate student position. Daily and Monthly Responsibilities: Assist with the development and testing of new software functions in Java. Work with a team to create and improve existing web applications with Spring, JavaScript, jQuery, AJAX, and CSS. Write SQL to work with MariaDB and other databases. Collaborate with scientists and engineers to plan new features and review products in development. Requirements: Must be pursuing a Bachelors or a Masters degree in Computer Science. Undergraduate students must be rising seniors. 0 years: Academic or project-based experience with Java or either C++, C#, Groovy, or Scala and willingness to learn Java is required. Industry internship experience with Spring, JavaScript, jQuery, AJAX, JSP, Servlet, or SQL (Oracle or MySQL) is a plus. A valid/clear driver's license is required. Special Requirements: Must be a U.S. person (i.e., U.S. citizen, non-U.S. citizen national, lawful permanent resident, asylee, or refugee) due to ITAR work in section. Job Locations: San Antonio, Texas For more information about this division, visit the Space Science home page. An Equal Employment Opportunity Employer: race, color, religion, sex, national origin, disability, and veteran status. If you need assistance with completing the application, please Contact Us Back To Top
Pay Range: $95.00hr - $100.00hr Job Overview: Our client is seeking a Supply Chain Sr. Project Manager responsible for planning, leading, and executing complex cross-functional projects to set up a new manufacturing facility and related procurement and logistics functions within the Business Applications group. This role requires domain exposure within the supply chain (Plan, Source, Make, Deliver). Knowledge of SAP S4/HANA, SAP ME (MES System), S/4 EWMS, and Agile (PLM) is beneficial. Project Roles and Responsibilities: The position is responsible for managing timelines and execution of projects for IT and business COE led implementation of, procurement, manufacturing, and delivery functions for a new manufacturing plant. Projects will span across a broad range from ideation, evaluation to implementation of existing solution to a new site, scale up for product launches, system upgrades, and facility expansions. Develop, coordinate, and maintain integrated Manufacturing and Product Qualification timelines and governance for all assigned activities of the project. Drive project management best practices for Global Operations. Project Skills & Experience: 7+ to 10 years of experience working across business and IT with strong project delivery experience, in key SAP Lead roles as Project or Delivery Manager or COE Technical Lead that involves multi-module implementation of SAP ERP solutions with ECC6.0 or S/4 HANA. Must have worked with SAP S/4 HANA projects and phased global implementations at multi-national industries and led technical project teams in an Agile manner for rollouts. Showcase at least 2 successful end-to-end implementations of SAP ECC6.0 and S/4 HANA projects in mid-size industries and 1 implementation in a large-size manufacturing industry. Experience implementing a MES system is a plus. Experienced in managing partnerships with third-party system integrators, SAP Services, and other service providers in a project implementation. Project Management Roles & Responsibilities: Gain cross-functional alignment on strategies, goals, resources, and timelines across teams including Finance, Manufacturing & Operations, Infrastructure, Product Quality, Regulatory & Compliance, Field Service, and other Business Units. Partner with business PM to organize and lead core team and executive steering committee meetings including status reports to the project sponsor and steering committee. Drive resolution of constraints, conflicts, and other challenges that could impact timely and successful execution of projects. Provide clear communication to the organization on project status, critical path, as well as potential areas of risk, and create and manage project plans while assigning tasks to team members. Manage project deliverables in line with the project plan, including Kick Off Presentations, Detailed Project Schedules in MS Project or Smartsheet, Project Budget vs. Actuals, Business Blueprints, Test Plans, and Training Plans. Drive Organization Change Management engagement, including stakeholder analysis, communication plans, training material, end-user training, and solution adoption. Record and manage project issues, escalating when necessary to ensure resolution on a timely basis. Ensure compliance to internal business and quality system requirements and to external regulatory standards. Skills, Experience, Education, & Training: Proficiency with MS Office and JIRA. Strong verbal and written communication skills and presentation skills. Proven ability to lead, influence, and work well at all levels of an organization and in a cross-functional team environment. Ability to handle ambiguity effectively and oversee multiple projects at once. Minimum 8 years of experience involved in leading major cross-functional projects in Manufacturing Operations. Medical device experience is a plus. Experience with supervising people desired. PMP Certification is required. Scrum Master (CSM) certification desired. SAP Supply Chain Project Management experience required, with SAP GTS, S/4, EWM, and TMS desired. Ability to travel up to 50% of the time to international locations including Malaysia. BS or equivalent work experience. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
10/27/2026
Full time
Pay Range: $95.00hr - $100.00hr Job Overview: Our client is seeking a Supply Chain Sr. Project Manager responsible for planning, leading, and executing complex cross-functional projects to set up a new manufacturing facility and related procurement and logistics functions within the Business Applications group. This role requires domain exposure within the supply chain (Plan, Source, Make, Deliver). Knowledge of SAP S4/HANA, SAP ME (MES System), S/4 EWMS, and Agile (PLM) is beneficial. Project Roles and Responsibilities: The position is responsible for managing timelines and execution of projects for IT and business COE led implementation of, procurement, manufacturing, and delivery functions for a new manufacturing plant. Projects will span across a broad range from ideation, evaluation to implementation of existing solution to a new site, scale up for product launches, system upgrades, and facility expansions. Develop, coordinate, and maintain integrated Manufacturing and Product Qualification timelines and governance for all assigned activities of the project. Drive project management best practices for Global Operations. Project Skills & Experience: 7+ to 10 years of experience working across business and IT with strong project delivery experience, in key SAP Lead roles as Project or Delivery Manager or COE Technical Lead that involves multi-module implementation of SAP ERP solutions with ECC6.0 or S/4 HANA. Must have worked with SAP S/4 HANA projects and phased global implementations at multi-national industries and led technical project teams in an Agile manner for rollouts. Showcase at least 2 successful end-to-end implementations of SAP ECC6.0 and S/4 HANA projects in mid-size industries and 1 implementation in a large-size manufacturing industry. Experience implementing a MES system is a plus. Experienced in managing partnerships with third-party system integrators, SAP Services, and other service providers in a project implementation. Project Management Roles & Responsibilities: Gain cross-functional alignment on strategies, goals, resources, and timelines across teams including Finance, Manufacturing & Operations, Infrastructure, Product Quality, Regulatory & Compliance, Field Service, and other Business Units. Partner with business PM to organize and lead core team and executive steering committee meetings including status reports to the project sponsor and steering committee. Drive resolution of constraints, conflicts, and other challenges that could impact timely and successful execution of projects. Provide clear communication to the organization on project status, critical path, as well as potential areas of risk, and create and manage project plans while assigning tasks to team members. Manage project deliverables in line with the project plan, including Kick Off Presentations, Detailed Project Schedules in MS Project or Smartsheet, Project Budget vs. Actuals, Business Blueprints, Test Plans, and Training Plans. Drive Organization Change Management engagement, including stakeholder analysis, communication plans, training material, end-user training, and solution adoption. Record and manage project issues, escalating when necessary to ensure resolution on a timely basis. Ensure compliance to internal business and quality system requirements and to external regulatory standards. Skills, Experience, Education, & Training: Proficiency with MS Office and JIRA. Strong verbal and written communication skills and presentation skills. Proven ability to lead, influence, and work well at all levels of an organization and in a cross-functional team environment. Ability to handle ambiguity effectively and oversee multiple projects at once. Minimum 8 years of experience involved in leading major cross-functional projects in Manufacturing Operations. Medical device experience is a plus. Experience with supervising people desired. PMP Certification is required. Scrum Master (CSM) certification desired. SAP Supply Chain Project Management experience required, with SAP GTS, S/4, EWM, and TMS desired. Ability to travel up to 50% of the time to international locations including Malaysia. BS or equivalent work experience. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Pay Range: $35.00hr - $40.00hr Job Overview: Our client is dedicated to recruiting and developing high-performing talent passionate about their work. Employees are unified in a shared dedication to the customer's mission and professional growth within an inclusive, engaging environment designed to promote work-life success. The organization delivers end-to-end technology solutions connecting space, air, land, sea, and cyber domains in the interest of national security. A Senior Engineering Technician is needed to join a dynamic test and integration team supporting cutting-edge defense and space programs. In this role, the candidate will leverage extensive technical expertise to autonomously lead complex test operations, mentor junior technicians, and drive solutions to challenging electromechanical integration problems in a hands-on, fast-paced environment. Work Environment: Electrostatic Discharge (ESD) environment requiring hair net, booties, smock, and grounding straps. Essential Functions: Performs a variety of duties in the electronic, mechanical, electromechanical, and optical areas. Assists in the design, construction, test, and check-out of test equipment. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, operating or repair manuals, engineering drawings, and written or verbal instructions. Works with complex machines and computer systems. Build, modify, and integrate electromechanical assemblies, test equipment, fixtures, racks, and support tooling; support interconnect verification, wiring and termination, initial power-on, and troubleshooting to the component level. Read, interpret, and provide redline markups on electrical schematics, mechanical drawings, interconnect drawings, wiring diagrams, and Bills of Materials (BOMs); collaborate with Engineering and Quality to implement improvements and technical recommendations. Perform cable and wire harness fabrication, build, repair, routing, bonding, and soldering; conduct continuity checks, resistance and voltage checks, and workmanship standard corrections. Manage lab test asset movement, storage, and availability; maintain critical spares and consumables inventory; coordinate across internal teams to execute time-sensitive work. Maintain detail-oriented management of inventory, assembly, and kitting activities to support program schedules and deliverables. Mentor and train lower-level technician peers, sharing technical expertise and best practices across electromechanical build and integration activities. Manage multiple tasks and less structured activities requiring independent judgment; coordinate build and integration activities, acting as a facilitator for the program Test Engineer. Position requires the ability to obtain a United States security clearance. Must-Haves (Hard Skills): Experience operating Radio Frequency (RF) and digital test equipment and technology. Very strong computer skills, including the ability to run automated tests, navigate directories, and utilize Windows and Microsoft Office programs while adhering to strict documented processes. Strong attention to detail with the ability to work with small, fragile, and detailed parts. Nice-To-Haves (Hard Skills): Experience with qualification testing, including vibration, thermal, and thermal vacuum testing. Qualifications: Requires a High School Diploma or equivalent with a minimum of 8+ years of prior relevant experience, or an Associate's Degree with a minimum of 6+ years of prior related experience. Active US security clearance preferred; must have the ability to obtain a US security clearance post-start. Demonstrated experience in electronic test, assembly, manufacturing, or a related technical field. Preferred Additional Skills: Hands-on experience with cable and wire harness fabrication including soldering, bonding, and routing in a high-reliability environment. Experience building and integrating electronic test equipment, fixtures, and racks for space or defense programs. Familiarity with electronic test equipment such as multimeters, oscilloscopes, and Radio Frequency (RF) analyzers. Experience with interconnect verification, continuity checks, and resistance and voltage measurements. Background with inventory management, assembly kitting, and lab asset coordination. Experience providing redline markups on electrical schematics, wiring diagrams, and Bills of Materials (BOMs). Forklift and Crane Certification or experience. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
10/27/2026
Full time
Pay Range: $35.00hr - $40.00hr Job Overview: Our client is dedicated to recruiting and developing high-performing talent passionate about their work. Employees are unified in a shared dedication to the customer's mission and professional growth within an inclusive, engaging environment designed to promote work-life success. The organization delivers end-to-end technology solutions connecting space, air, land, sea, and cyber domains in the interest of national security. A Senior Engineering Technician is needed to join a dynamic test and integration team supporting cutting-edge defense and space programs. In this role, the candidate will leverage extensive technical expertise to autonomously lead complex test operations, mentor junior technicians, and drive solutions to challenging electromechanical integration problems in a hands-on, fast-paced environment. Work Environment: Electrostatic Discharge (ESD) environment requiring hair net, booties, smock, and grounding straps. Essential Functions: Performs a variety of duties in the electronic, mechanical, electromechanical, and optical areas. Assists in the design, construction, test, and check-out of test equipment. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, operating or repair manuals, engineering drawings, and written or verbal instructions. Works with complex machines and computer systems. Build, modify, and integrate electromechanical assemblies, test equipment, fixtures, racks, and support tooling; support interconnect verification, wiring and termination, initial power-on, and troubleshooting to the component level. Read, interpret, and provide redline markups on electrical schematics, mechanical drawings, interconnect drawings, wiring diagrams, and Bills of Materials (BOMs); collaborate with Engineering and Quality to implement improvements and technical recommendations. Perform cable and wire harness fabrication, build, repair, routing, bonding, and soldering; conduct continuity checks, resistance and voltage checks, and workmanship standard corrections. Manage lab test asset movement, storage, and availability; maintain critical spares and consumables inventory; coordinate across internal teams to execute time-sensitive work. Maintain detail-oriented management of inventory, assembly, and kitting activities to support program schedules and deliverables. Mentor and train lower-level technician peers, sharing technical expertise and best practices across electromechanical build and integration activities. Manage multiple tasks and less structured activities requiring independent judgment; coordinate build and integration activities, acting as a facilitator for the program Test Engineer. Position requires the ability to obtain a United States security clearance. Must-Haves (Hard Skills): Experience operating Radio Frequency (RF) and digital test equipment and technology. Very strong computer skills, including the ability to run automated tests, navigate directories, and utilize Windows and Microsoft Office programs while adhering to strict documented processes. Strong attention to detail with the ability to work with small, fragile, and detailed parts. Nice-To-Haves (Hard Skills): Experience with qualification testing, including vibration, thermal, and thermal vacuum testing. Qualifications: Requires a High School Diploma or equivalent with a minimum of 8+ years of prior relevant experience, or an Associate's Degree with a minimum of 6+ years of prior related experience. Active US security clearance preferred; must have the ability to obtain a US security clearance post-start. Demonstrated experience in electronic test, assembly, manufacturing, or a related technical field. Preferred Additional Skills: Hands-on experience with cable and wire harness fabrication including soldering, bonding, and routing in a high-reliability environment. Experience building and integrating electronic test equipment, fixtures, and racks for space or defense programs. Familiarity with electronic test equipment such as multimeters, oscilloscopes, and Radio Frequency (RF) analyzers. Experience with interconnect verification, continuity checks, and resistance and voltage measurements. Background with inventory management, assembly kitting, and lab asset coordination. Experience providing redline markups on electrical schematics, wiring diagrams, and Bills of Materials (BOMs). Forklift and Crane Certification or experience. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Pay Range: $55.00hr - $60.00hr Job Overview: The organization is seeking an SAP MM Techno-Functional Consultant with 12+ years of experience to support SAP MM configuration, custom ABAP enhancements, system integrations, and S/4HANA migration initiatives. Responsibilities: Configure and support SAP MM including procurement, inventory, invoice verification, and master data. Build and support RICEFW objects, including ABAP enhancements, BAPIs, IDocs, forms, and workflows. Own MM integrations with FI/CO, SD, PP, QM, WM/EWM, PS, and PM, plus outside systems through PI/PO, CPI, EDI, and Ariba. Drive MM work for the S/4HANA migration, including Business Partner/CVI, MATDOC, custom code remediation, data migration (Migration Cockpit), testing, and cutover. Key Skills: 12+ years of hands-on SAP MM experience with strong ABAP and integration skills. Experience with at least two ECC to S/4HANA migrations or S/4HANA implementations. Experience with IDocs/EDI and middleware such as PI/PO or CPI. Ability to communicate effectively with business and IT stakeholders. Experience in semiconductor or high-tech manufacturing, S/4HANA Sourcing & Procurement certification, Fiori/CDS views, Ariba, and EWM. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
10/27/2026
Full time
Pay Range: $55.00hr - $60.00hr Job Overview: The organization is seeking an SAP MM Techno-Functional Consultant with 12+ years of experience to support SAP MM configuration, custom ABAP enhancements, system integrations, and S/4HANA migration initiatives. Responsibilities: Configure and support SAP MM including procurement, inventory, invoice verification, and master data. Build and support RICEFW objects, including ABAP enhancements, BAPIs, IDocs, forms, and workflows. Own MM integrations with FI/CO, SD, PP, QM, WM/EWM, PS, and PM, plus outside systems through PI/PO, CPI, EDI, and Ariba. Drive MM work for the S/4HANA migration, including Business Partner/CVI, MATDOC, custom code remediation, data migration (Migration Cockpit), testing, and cutover. Key Skills: 12+ years of hands-on SAP MM experience with strong ABAP and integration skills. Experience with at least two ECC to S/4HANA migrations or S/4HANA implementations. Experience with IDocs/EDI and middleware such as PI/PO or CPI. Ability to communicate effectively with business and IT stakeholders. Experience in semiconductor or high-tech manufacturing, S/4HANA Sourcing & Procurement certification, Fiori/CDS views, Ariba, and EWM. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
DCS has an exciting opportunity for a Senior Systems Engineer providing support to the Air Force Life Cycle Management Center/ISR SOF (AFLCMC/HB). The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. AFLCMC/PEO ISR SOF is headquartered at Wright Patterson Air Force Base, OH with geographically separated operating units CONUS and OCONUS. This position supports the Advanced E7 Development and the FMS Division, supporting the Royal Saudi Air Force, as part of the International Airborne Battle Management Command and Control (FMS) Division; AFLMC(WIW). The WIW Division located at Tinker AFB (OK), and Hanscom AFB (MA), with dispersed support at Eglin AFB, Seattle WA, San Antonio TX and several OCONUS positions. This position specifically supports the Foreign Military Sales (FMS) Japan Program Office. This is a full-time position located at Hanscom Air Force Base, MA. Essential Job Functions: Duties include, but not limited to: Conduct comprehensive program portfolio reviews to evaluate and recommend alternative plans, enhance systems engineering processes, manage and sustain technical baselines, and design/perform system-level tests to ensure subsystem and system performance aligns with approved specifications. Review and evaluate alternative plans, systems engineering programs, designs, and test results to verify subsystem and system performance compliance with program specifications. Prepare technical documentation defining and recommending system/subsystem characteristics, management reports, and technical presentations for planning, implementation, and corrective actions, applying engineering economy principles. Perform system validations, including criteria and procedure development, and analyze/evaluate major engineering system results. Provide engineering, technical support, and training for programs/initiatives, including acquisition, development, integration, sustainment, evolution, deployment, fielding, installation, and operations oversight. Support risk management activities in alignment with Air Force Systems Engineering Assessment Model (AF SEAM) processes. Conduct formal trade studies considering engineering performance, effectiveness, cost-performance balance, lifecycle cost, reliability, maintainability, risk, and schedule. Offer technical recommendations through reviews, studies, audits, evaluations, analyses, procedural guidance, and documentation, supporting engineering Integrated Product Teams (IPTs). Analyze proposals to compare and quantify technical feasibility, compatibility, and cost-effectiveness of proposed systems and components. Concepts and Requirements Analysis: Review and analyze key documents, including Initial Capabilities Documents (ICDs), Capability Development Documents (CDDs), Capability Production Documents (CPDs), and Analyses of Alternatives (AoAs). Conduct assessments of military utility, operational concepts (CONOPs), technology development strategies, functional configuration audits (FCAs), physical configuration audits (PCAs), and technology standards profiles. Analyze system concepts and user requirements entered into system requirements baselines (functional, allocated, and product). Engineering Process Support: Assist in material solution analysis, technology development, engineering, manufacturing, production, deployment, and operations support. Provide support for engineering technical processes, including version/configuration control, requirements analysis, architecture design, implementation, integration, verification, validation, and decision analysis. Perform risk, configuration, technical data, and interface management, as well as technical planning and assessments. Technical Reviews and Documentation: Support planning and execution of technical reviews (e.g., System Requirements Review, Technology Readiness Assessments) and develop associated documentation (e.g., Systems Engineering Plan, Risk Management Plan). Develop systems engineering documentation, ensuring understanding of systems-of-systems interactions, configuration management, technical data packages, and acquisition/sustainment engineering processes. Travel: 10% Required Skills: Due to the sensitivity of the customer, U.S. citizenship is required. Must have a Secret Clearance. Bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, 5 of which must be in the DoD OR 15 years of directly related experience, 8 of which must be in the DoD. Desired Skills: Technical Skills Systems engineering expertise across documentation, requirements development, and CDRL review processes Strong capability in evaluating alternative technical plans, architectures, and engineering designs Experience conducting system-level testing, validations, FCAs/PCAs, and ensuring subsystem/system compliance with specifications Skilled in preparing technical documentation, management reports, and technical presentations for planning and corrective actions Proficiency in risk management aligned with AF SEAM, configuration/version control, and interface/technical data management Ability to perform trade studies balancing performance, lifecycle cost, reliability, maintainability, schedule, and risk Competence in analyzing ICDs, CDDs, CPDs, AoAs, and translating concepts and operational requirements into system baselines Interpersonal Skills Strong communication capabilities with clear, concise, and technically accurate messaging across diverse stakeholder groups Proactive, organized, and detail-oriented leadership style with the ability to drive outcomes without direct authority Demonstrated ability to build and maintain professional relationships within cross-functional and international environments High adaptability and situational awareness when navigating complex, multi-stakeholder modernization programs Effective collaborator within engineering IPTs, facilitating consensus, alignment, and informed decision-making Strong problem-solving abilities with a self-starter mindset, capable of independently identifying issues and recommending solutions Ability to lead through influence by fostering cooperation, transparency, and shared ownership of engineering objectives Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. The proposed salary range for this position is: Salary Range: $123,639 - $170,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives. We offer competitive compensation, benefits, and opportunities for learning and development. Our broad and competitive mix of benefits is designed to support and protect employees and their families. Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs. Learn more about our benefits here: DCS Corp Benefits.
10/27/2026
Full time
DCS has an exciting opportunity for a Senior Systems Engineer providing support to the Air Force Life Cycle Management Center/ISR SOF (AFLCMC/HB). The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. AFLCMC/PEO ISR SOF is headquartered at Wright Patterson Air Force Base, OH with geographically separated operating units CONUS and OCONUS. This position supports the Advanced E7 Development and the FMS Division, supporting the Royal Saudi Air Force, as part of the International Airborne Battle Management Command and Control (FMS) Division; AFLMC(WIW). The WIW Division located at Tinker AFB (OK), and Hanscom AFB (MA), with dispersed support at Eglin AFB, Seattle WA, San Antonio TX and several OCONUS positions. This position specifically supports the Foreign Military Sales (FMS) Japan Program Office. This is a full-time position located at Hanscom Air Force Base, MA. Essential Job Functions: Duties include, but not limited to: Conduct comprehensive program portfolio reviews to evaluate and recommend alternative plans, enhance systems engineering processes, manage and sustain technical baselines, and design/perform system-level tests to ensure subsystem and system performance aligns with approved specifications. Review and evaluate alternative plans, systems engineering programs, designs, and test results to verify subsystem and system performance compliance with program specifications. Prepare technical documentation defining and recommending system/subsystem characteristics, management reports, and technical presentations for planning, implementation, and corrective actions, applying engineering economy principles. Perform system validations, including criteria and procedure development, and analyze/evaluate major engineering system results. Provide engineering, technical support, and training for programs/initiatives, including acquisition, development, integration, sustainment, evolution, deployment, fielding, installation, and operations oversight. Support risk management activities in alignment with Air Force Systems Engineering Assessment Model (AF SEAM) processes. Conduct formal trade studies considering engineering performance, effectiveness, cost-performance balance, lifecycle cost, reliability, maintainability, risk, and schedule. Offer technical recommendations through reviews, studies, audits, evaluations, analyses, procedural guidance, and documentation, supporting engineering Integrated Product Teams (IPTs). Analyze proposals to compare and quantify technical feasibility, compatibility, and cost-effectiveness of proposed systems and components. Concepts and Requirements Analysis: Review and analyze key documents, including Initial Capabilities Documents (ICDs), Capability Development Documents (CDDs), Capability Production Documents (CPDs), and Analyses of Alternatives (AoAs). Conduct assessments of military utility, operational concepts (CONOPs), technology development strategies, functional configuration audits (FCAs), physical configuration audits (PCAs), and technology standards profiles. Analyze system concepts and user requirements entered into system requirements baselines (functional, allocated, and product). Engineering Process Support: Assist in material solution analysis, technology development, engineering, manufacturing, production, deployment, and operations support. Provide support for engineering technical processes, including version/configuration control, requirements analysis, architecture design, implementation, integration, verification, validation, and decision analysis. Perform risk, configuration, technical data, and interface management, as well as technical planning and assessments. Technical Reviews and Documentation: Support planning and execution of technical reviews (e.g., System Requirements Review, Technology Readiness Assessments) and develop associated documentation (e.g., Systems Engineering Plan, Risk Management Plan). Develop systems engineering documentation, ensuring understanding of systems-of-systems interactions, configuration management, technical data packages, and acquisition/sustainment engineering processes. Travel: 10% Required Skills: Due to the sensitivity of the customer, U.S. citizenship is required. Must have a Secret Clearance. Bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, 5 of which must be in the DoD OR 15 years of directly related experience, 8 of which must be in the DoD. Desired Skills: Technical Skills Systems engineering expertise across documentation, requirements development, and CDRL review processes Strong capability in evaluating alternative technical plans, architectures, and engineering designs Experience conducting system-level testing, validations, FCAs/PCAs, and ensuring subsystem/system compliance with specifications Skilled in preparing technical documentation, management reports, and technical presentations for planning and corrective actions Proficiency in risk management aligned with AF SEAM, configuration/version control, and interface/technical data management Ability to perform trade studies balancing performance, lifecycle cost, reliability, maintainability, schedule, and risk Competence in analyzing ICDs, CDDs, CPDs, AoAs, and translating concepts and operational requirements into system baselines Interpersonal Skills Strong communication capabilities with clear, concise, and technically accurate messaging across diverse stakeholder groups Proactive, organized, and detail-oriented leadership style with the ability to drive outcomes without direct authority Demonstrated ability to build and maintain professional relationships within cross-functional and international environments High adaptability and situational awareness when navigating complex, multi-stakeholder modernization programs Effective collaborator within engineering IPTs, facilitating consensus, alignment, and informed decision-making Strong problem-solving abilities with a self-starter mindset, capable of independently identifying issues and recommending solutions Ability to lead through influence by fostering cooperation, transparency, and shared ownership of engineering objectives Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. The proposed salary range for this position is: Salary Range: $123,639 - $170,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives. We offer competitive compensation, benefits, and opportunities for learning and development. Our broad and competitive mix of benefits is designed to support and protect employees and their families. Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs. Learn more about our benefits here: DCS Corp Benefits.
ITC Digital Solutions is hiring a Sr. Security Engineer - Security Engineering Team to join our Aerospace team in Indianapolis, IN to support our government clients. The successful applicant will work closely with our clients to provide technical support in information security response, security monitoring, and supports audit/compliance activities. The role is focused in three main areas for Security Engineering and Operational activity. The successful applicant will have the opportunity to apply and grow their skill set, work with a motivated and entrepreneurial team, engage with a wide range of stakeholders, and build ITC's capabilities to serve our clients. Job Responsibilities As a Sr. Security Engineer - Security Engineering Team, you will: Run Activity - Monitoring and acting as required on the health of various Security tools. Incident Response - responding with appropriate actions as required regarding tooling within the remit of the SET. Triaging requests incoming to the Engineering Team mailbox and Service Management intake queue, ensuring ownership within the wider team is appropriately assigned and requests have ownership. Responsible for ensuring the integrity of client IT infrastructures. Responsible for keeping the lights green on all Security Toolkit Infrastructure within our remit. Support various toolsets including SIEM, IDPS, GVM and Malware Protection. Record and respond to health alerts from the Security Infrastructure we maintain. Configure and adjust policies, features, and enhancements as needed, both in response to security incidents and to accommodate client request for improvements. Troubleshooting security tools that may affect business applications when needed. Respond to and follow core IT Service Management Principles. Ddevelop and demonstrate a solid understanding of information security principles, including malware analysis, emerging threats, attack techniques, and vulnerability management. Required Qualifications: U.S. Citizenship is required. Eligible to obtain and maintain Government Security Clearance. 5-7 years of experience working in SOC environment as a Security Engineering Specialist. Experience supporting a large global enterprise environment Solid and demonstrable comprehension of Information Security including malware, emerging threats, attacks, and vulnerability management. Customer service including the resolution of customer escalations, incident handling response. Nice to have skills/qualifications: Cloud security experience. Programming and/or scripting language experience (C, .NET, Python, Perl, etc). Previous experience in Unix/Linux and the editor vi. Technical certifications considered asset are: CISSP, GCIH, GCIA, GCFA, GPEN, GCCF, CISA, CWSP, CCSP, CCNP, MSCE, Security+, or other relevant certification in vulnerability analysis, ethnical hacking techniques or penetration testing. Experience in the areas of change control, problem management, incident management and troubleshooting of security solutions. Technical proficiency in at least one enterprise SIEM platform (i.e. ArcSight, Envision, Q1 Radar, Nitro Security), and at least one enterprise Network Intrusion Detection System (i.e. HP Tipping Point, Sourcefire, McAfee) Familiarity with the Aerospace, Defense, or complex manufacturing industries. About ITC Digital Solutions: ITC Digital Solutions, a division of ITC Federal, delivers advanced technology solutions that help federal agencies modernize systems, harness data and AI, and adopt emerging technologies to advance their missions. Building on more than two decades of public sector experience, the team brings deep expertise in IT strategy, application development and testing, digital modernization, data and AI, and technology transformation across civilian, health, national security, and defense agencies. Disclaimer All qualified applicants will be considered for employment based on their skills and merit. Please be aware that ITC may capture your image (video or screenshot) during the interview process, and that image may be used for verification, including during the hiring and onboarding process. Applicants for employment in the U.S. must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the U.S. by ITC. ITC discloses salary range information in compliance with state and local pay transparency obligations. The disclosed range represents the lowest to highest salary we, in good faith, believe we would pay for this role at the time of this posting, although we may ultimately pay more or less than the disclosed range, and the range may be modified in the future. The disclosed range takes into account the wide range of factors considered in making compensation decisions, including, but not limited to, geographic location, relevant education, qualifications, certifications, experience, skills, seniority, performance, sales- or revenue-based metrics, and business or organizational needs. At ITC, it is not typical for an individual to be hired at or near the top of the range for their role. The base salary range for the tagged location is $100,000-$120,000. Full-time regular employees are eligible for paid time off, medical, dental, and vision insurance, a 401(k), and any other benefits available to eligible employees. Note: No amount of pay is considered wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or other form of compensation allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with applicable law. Equal Opportunity Employer/Protected Veterans The contractor will not discharge or otherwise discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions may not disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge; (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer; or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c).
10/27/2026
Full time
ITC Digital Solutions is hiring a Sr. Security Engineer - Security Engineering Team to join our Aerospace team in Indianapolis, IN to support our government clients. The successful applicant will work closely with our clients to provide technical support in information security response, security monitoring, and supports audit/compliance activities. The role is focused in three main areas for Security Engineering and Operational activity. The successful applicant will have the opportunity to apply and grow their skill set, work with a motivated and entrepreneurial team, engage with a wide range of stakeholders, and build ITC's capabilities to serve our clients. Job Responsibilities As a Sr. Security Engineer - Security Engineering Team, you will: Run Activity - Monitoring and acting as required on the health of various Security tools. Incident Response - responding with appropriate actions as required regarding tooling within the remit of the SET. Triaging requests incoming to the Engineering Team mailbox and Service Management intake queue, ensuring ownership within the wider team is appropriately assigned and requests have ownership. Responsible for ensuring the integrity of client IT infrastructures. Responsible for keeping the lights green on all Security Toolkit Infrastructure within our remit. Support various toolsets including SIEM, IDPS, GVM and Malware Protection. Record and respond to health alerts from the Security Infrastructure we maintain. Configure and adjust policies, features, and enhancements as needed, both in response to security incidents and to accommodate client request for improvements. Troubleshooting security tools that may affect business applications when needed. Respond to and follow core IT Service Management Principles. Ddevelop and demonstrate a solid understanding of information security principles, including malware analysis, emerging threats, attack techniques, and vulnerability management. Required Qualifications: U.S. Citizenship is required. Eligible to obtain and maintain Government Security Clearance. 5-7 years of experience working in SOC environment as a Security Engineering Specialist. Experience supporting a large global enterprise environment Solid and demonstrable comprehension of Information Security including malware, emerging threats, attacks, and vulnerability management. Customer service including the resolution of customer escalations, incident handling response. Nice to have skills/qualifications: Cloud security experience. Programming and/or scripting language experience (C, .NET, Python, Perl, etc). Previous experience in Unix/Linux and the editor vi. Technical certifications considered asset are: CISSP, GCIH, GCIA, GCFA, GPEN, GCCF, CISA, CWSP, CCSP, CCNP, MSCE, Security+, or other relevant certification in vulnerability analysis, ethnical hacking techniques or penetration testing. Experience in the areas of change control, problem management, incident management and troubleshooting of security solutions. Technical proficiency in at least one enterprise SIEM platform (i.e. ArcSight, Envision, Q1 Radar, Nitro Security), and at least one enterprise Network Intrusion Detection System (i.e. HP Tipping Point, Sourcefire, McAfee) Familiarity with the Aerospace, Defense, or complex manufacturing industries. About ITC Digital Solutions: ITC Digital Solutions, a division of ITC Federal, delivers advanced technology solutions that help federal agencies modernize systems, harness data and AI, and adopt emerging technologies to advance their missions. Building on more than two decades of public sector experience, the team brings deep expertise in IT strategy, application development and testing, digital modernization, data and AI, and technology transformation across civilian, health, national security, and defense agencies. Disclaimer All qualified applicants will be considered for employment based on their skills and merit. Please be aware that ITC may capture your image (video or screenshot) during the interview process, and that image may be used for verification, including during the hiring and onboarding process. Applicants for employment in the U.S. must have valid work authorization that does not now and/or will not in the future require sponsorship of a visa for employment authorization in the U.S. by ITC. ITC discloses salary range information in compliance with state and local pay transparency obligations. The disclosed range represents the lowest to highest salary we, in good faith, believe we would pay for this role at the time of this posting, although we may ultimately pay more or less than the disclosed range, and the range may be modified in the future. The disclosed range takes into account the wide range of factors considered in making compensation decisions, including, but not limited to, geographic location, relevant education, qualifications, certifications, experience, skills, seniority, performance, sales- or revenue-based metrics, and business or organizational needs. At ITC, it is not typical for an individual to be hired at or near the top of the range for their role. The base salary range for the tagged location is $100,000-$120,000. Full-time regular employees are eligible for paid time off, medical, dental, and vision insurance, a 401(k), and any other benefits available to eligible employees. Note: No amount of pay is considered wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or other form of compensation allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with applicable law. Equal Opportunity Employer/Protected Veterans The contractor will not discharge or otherwise discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions may not disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge; (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer; or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c).
Pay Range: $75.00hr - $80.00hr Job Overview: The SAP Quality Management (QM) Consultant requires 8 to 14 years of experience. The role involves configuring, implementing, and supporting SAP QM and PP modules, as well as working closely with business requirements and development teams. Responsibilities: The candidate will facilitate the implementation and support of SAP Quality Management. The position is capable of requirement gathering and building functional specifications, guiding ABAP developers on solutions, and testing with strong business acumen. The successful candidate will sum up business requirements into business processes and help break those down into items to be built from a development perspective. Requirements: Configuration expert in SAP QM and PP modules. Mandatory experience on inspection type origin 03 and 04. Hands-on experience with QM-MM and PP-QM integration. Experience in Quality notification, Quality Inspection, and Business workflow areas. Must be results-oriented and demonstrate adaptability, flexibility, and resourcefulness. Preferred Qualifications: Industry experience in aerospace, defense, or automotive is nice to have. Exposure to FIORI applications and S/4HANA applications is preferred. Experience in complex assembly manufacturing is preferred. At least 2 to 3 SAP implementation project experiences preferred in both Production Planning and Quality modules. Hands-on experience with SAP quality notification business workflow is a plus. Hands-on experience in Quality Management with procurement end inspection (Origin 01). Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
10/27/2026
Full time
Pay Range: $75.00hr - $80.00hr Job Overview: The SAP Quality Management (QM) Consultant requires 8 to 14 years of experience. The role involves configuring, implementing, and supporting SAP QM and PP modules, as well as working closely with business requirements and development teams. Responsibilities: The candidate will facilitate the implementation and support of SAP Quality Management. The position is capable of requirement gathering and building functional specifications, guiding ABAP developers on solutions, and testing with strong business acumen. The successful candidate will sum up business requirements into business processes and help break those down into items to be built from a development perspective. Requirements: Configuration expert in SAP QM and PP modules. Mandatory experience on inspection type origin 03 and 04. Hands-on experience with QM-MM and PP-QM integration. Experience in Quality notification, Quality Inspection, and Business workflow areas. Must be results-oriented and demonstrate adaptability, flexibility, and resourcefulness. Preferred Qualifications: Industry experience in aerospace, defense, or automotive is nice to have. Exposure to FIORI applications and S/4HANA applications is preferred. Experience in complex assembly manufacturing is preferred. At least 2 to 3 SAP implementation project experiences preferred in both Production Planning and Quality modules. Hands-on experience with SAP quality notification business workflow is a plus. Hands-on experience in Quality Management with procurement end inspection (Origin 01). Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Job Title: Senior Embedded Software Engineer Client: Heavy Machine Manufacturing Company Duration: 12 Months Contract Location: Urbandale, IA 50322 Job Summary Design, develop, test, and implement embedded software for HVC products. Provide technical leadership and take software solutions from development and validation through production.
10/27/2026
Full time
Job Title: Senior Embedded Software Engineer Client: Heavy Machine Manufacturing Company Duration: 12 Months Contract Location: Urbandale, IA 50322 Job Summary Design, develop, test, and implement embedded software for HVC products. Provide technical leadership and take software solutions from development and validation through production.
Southwest Research Institute - Fulltime
Oklahoma City, Oklahoma
Who We Are: The Embedded Systems Section within the Strategic Aerospace Department delivers comprehensive engineering solutions for the aerospace community, specializing in system engineering, technology insertion, requirements generation, cybersecurity, trade studies, and full lifecycle support. Our expertise encompasses the design, development, maintenance, and production of advanced hardware and software systems, supporting everything from microcircuits to major subsystems for aircraft and ground support equipment, ensuring mission-critical performance and innovation. Objectives of this Role: Support design, development, analysis, integration, and test of avionics electronics, circuit card assemblies, and embedded hardware for aerospace and defense applications. Assist senior engineers with schematic capture, component selection, interface definition, circuit analysis, laboratory troubleshooting, and verification of analog, digital, and power electronics. Develop practical knowledge of avionics hardware design, electrical interfaces, embedded electronics, test equipment, and engineering processes through hands-on project execution. Support multidisciplinary teams integrating electrical hardware with software, firmware, mechanical systems, sensors, and aircraft or laboratory test environments. Prepare engineering documentation, calculations, test procedures, reports, design updates, and technical data supporting development, qualification, and sustainment activities. Daily and Monthly Responsibilities: Create and update schematics, bills of material, interface definitions, wiring information, and basic electrical design documentation under the guidance of experienced engineers. Perform circuit calculations, component research, tolerance reviews, bench measurements, troubleshooting, and laboratory testing of analog, digital, power, and mixed-signal electronics. Support prototype build, bring-up, integration, and test of circuit card assemblies, embedded electronics, avionics interfaces, sensors, and associated test equipment. Use electrical engineering tools for schematic capture, simulation, data analysis, documentation, and configuration control. Learn applicable aerospace and defense design standards. Work with systems, software, firmware, mechanical, test, and manufacturing engineers to resolve technical issues and support successful hardware integration and verification. Requirements: Requires a Bachelors degree in Electrical Engineering or Computer Engineering. 0 years: Academic, internship, co-op, laboratory, senior-design, or research experience involving electronic hardware, circuit design, embedded systems, avionics, or electrical test. Experience or coursework using schematic capture, circuit simulation, laboratory instrumentation, PCB/CCA development, embedded electronics, or electrical troubleshooting is preferred. Familiarity with C/C++, Python, MATLAB, SPICE/PSpice, oscilloscopes, logic analyzers, power supplies, multimeters, or similar engineering tools is desirable. A valid/clear driver's license is required.
10/27/2026
Full time
Who We Are: The Embedded Systems Section within the Strategic Aerospace Department delivers comprehensive engineering solutions for the aerospace community, specializing in system engineering, technology insertion, requirements generation, cybersecurity, trade studies, and full lifecycle support. Our expertise encompasses the design, development, maintenance, and production of advanced hardware and software systems, supporting everything from microcircuits to major subsystems for aircraft and ground support equipment, ensuring mission-critical performance and innovation. Objectives of this Role: Support design, development, analysis, integration, and test of avionics electronics, circuit card assemblies, and embedded hardware for aerospace and defense applications. Assist senior engineers with schematic capture, component selection, interface definition, circuit analysis, laboratory troubleshooting, and verification of analog, digital, and power electronics. Develop practical knowledge of avionics hardware design, electrical interfaces, embedded electronics, test equipment, and engineering processes through hands-on project execution. Support multidisciplinary teams integrating electrical hardware with software, firmware, mechanical systems, sensors, and aircraft or laboratory test environments. Prepare engineering documentation, calculations, test procedures, reports, design updates, and technical data supporting development, qualification, and sustainment activities. Daily and Monthly Responsibilities: Create and update schematics, bills of material, interface definitions, wiring information, and basic electrical design documentation under the guidance of experienced engineers. Perform circuit calculations, component research, tolerance reviews, bench measurements, troubleshooting, and laboratory testing of analog, digital, power, and mixed-signal electronics. Support prototype build, bring-up, integration, and test of circuit card assemblies, embedded electronics, avionics interfaces, sensors, and associated test equipment. Use electrical engineering tools for schematic capture, simulation, data analysis, documentation, and configuration control. Learn applicable aerospace and defense design standards. Work with systems, software, firmware, mechanical, test, and manufacturing engineers to resolve technical issues and support successful hardware integration and verification. Requirements: Requires a Bachelors degree in Electrical Engineering or Computer Engineering. 0 years: Academic, internship, co-op, laboratory, senior-design, or research experience involving electronic hardware, circuit design, embedded systems, avionics, or electrical test. Experience or coursework using schematic capture, circuit simulation, laboratory instrumentation, PCB/CCA development, embedded electronics, or electrical troubleshooting is preferred. Familiarity with C/C++, Python, MATLAB, SPICE/PSpice, oscilloscopes, logic analyzers, power supplies, multimeters, or similar engineering tools is desirable. A valid/clear driver's license is required.
Senior Test Systems Engineer P4 Location: Tucson, AZ Job ID: Pay Range: $103-115 CONTRACT This position is 100% onsite in our Tucson, AZ location. Active and existing security clearance required on day 1 What You Will Do You will apply your knowledge of the subsystem and?collaborate?with other Engineering disciplines to?develop?and implement the subsystem model using Model Based System Engineering?tools?and methods. Detail capabilities and derive requirements. Communicate test equipment needs and requirements to Test Equipment designers. Manage requirements and traceability. Leverage and apply reuse of Test Environment requirements and models to promote efficiency in test design and development. You will?develop?subsystem requirements, interfaces, behaviors, and architecture. You will?interact?with Technical SMEs as necessary to fully?understand?the subsystem including identifying and resolving issues and?supporting?related subsystem trades or analysis. Qualifications You Must Have Bachelors in Science, Technology, Engineering, or Mathematics (STEM) with a minimum of eight (8) years of directly related engineering experience (or a STEM Masters with 6 years related experience) Experience in Systems Engineering or other Engineering discipline such as but not limited to emphasis in test requirements development, test methodologies, test requirements documents, integration, verification, and/or validation for test. Experience with developing, decomposing, and/ or managing system requirements across a product lifecycle such as design and transition to production. Experience with test related activities throughout the product lifecycle. Experience with Model Based Engineering processes, techniques, and tools (Rhapsody and IBM Rational Model Manager and/or Cameo Systems Modeler/Enterprise Architect and Teamwork Cloud preferred, and experience with Systems Modeling Language (SysML), and/or Unified Modeling Language (UML). The ability to maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience with embedded test techniques, design for test, design margin analysis, and/or design for manufacturing. Experience with Agile processes and techniques. Experience with Dynamic Object-Oriented Requirements System (DOORS). Experience problem solving and debugging. Experience recognizing areas of improvement or customer needs and relaying them to senior staff as business development possibilities. Experience demonstrating a sense of urgency, prudent risk-taking and adaptive response to challenges. Depending?on level of experience, you will provide mentoring and guidance to other team members. US Citizen Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
10/27/2026
Full time
Senior Test Systems Engineer P4 Location: Tucson, AZ Job ID: Pay Range: $103-115 CONTRACT This position is 100% onsite in our Tucson, AZ location. Active and existing security clearance required on day 1 What You Will Do You will apply your knowledge of the subsystem and?collaborate?with other Engineering disciplines to?develop?and implement the subsystem model using Model Based System Engineering?tools?and methods. Detail capabilities and derive requirements. Communicate test equipment needs and requirements to Test Equipment designers. Manage requirements and traceability. Leverage and apply reuse of Test Environment requirements and models to promote efficiency in test design and development. You will?develop?subsystem requirements, interfaces, behaviors, and architecture. You will?interact?with Technical SMEs as necessary to fully?understand?the subsystem including identifying and resolving issues and?supporting?related subsystem trades or analysis. Qualifications You Must Have Bachelors in Science, Technology, Engineering, or Mathematics (STEM) with a minimum of eight (8) years of directly related engineering experience (or a STEM Masters with 6 years related experience) Experience in Systems Engineering or other Engineering discipline such as but not limited to emphasis in test requirements development, test methodologies, test requirements documents, integration, verification, and/or validation for test. Experience with developing, decomposing, and/ or managing system requirements across a product lifecycle such as design and transition to production. Experience with test related activities throughout the product lifecycle. Experience with Model Based Engineering processes, techniques, and tools (Rhapsody and IBM Rational Model Manager and/or Cameo Systems Modeler/Enterprise Architect and Teamwork Cloud preferred, and experience with Systems Modeling Language (SysML), and/or Unified Modeling Language (UML). The ability to maintain a US security clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance Qualifications We Prefer Experience with embedded test techniques, design for test, design margin analysis, and/or design for manufacturing. Experience with Agile processes and techniques. Experience with Dynamic Object-Oriented Requirements System (DOORS). Experience problem solving and debugging. Experience recognizing areas of improvement or customer needs and relaying them to senior staff as business development possibilities. Experience demonstrating a sense of urgency, prudent risk-taking and adaptive response to challenges. Depending?on level of experience, you will provide mentoring and guidance to other team members. US Citizen Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
SUMMARY We are seeking a highly motivated MES Analyst with experience in food manufacturing and the Ignition platform or similar MES to support, enhance, and optimize manufacturing execution systems across production operations. This role will serve as a key technical resource responsible for MES configuration, data integration, production reporting, and continuous improvement initiatives within a regulated food manufacturing environment. The ideal candidate combines manufacturing systems expertise with strong operational knowledge of food production processes, traceability requirements, and industrial automation systems. This role is 100% onsite in Marlborough, MA. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: The MES Analyst will be responsible for overseeing the adoption/development/and support of Ken's Foods Manufacturing Execution System. This person will be tasked with being a subject matter expert on all facets of the system and work to ensure adoption and best practices across the organization. They will act as the key liaison between the corporate and plant floor teams, the technical development team, and the senior management team. They will work to provide training and assistance with the MES system. MES & Ignition Platform Support Administer, configure, and support the Ignition platform for manufacturing execution and operational visibility. Develop and maintain Ignition projects, including: Production dashboards Downtime tracking OEE monitoring Recipe management Electronic batch records Traceability applications Quality and production reporting Troubleshoot MES and Ignition-related issues affecting manufacturing operations. Manage system integrations between Ignition, PLCs, SCADA systems, historians, ERP systems, and databases. Support gateway administration, tag management, alarming, scripting, and user security within Ignition. Manufacturing & Operations Support Partner with operations, QA, maintenance, engineering, and IT teams to improve manufacturing efficiency and data accuracy. Analyze manufacturing data to identify trends, bottlenecks, downtime causes, and process improvement opportunities. Support digital transformation initiatives and plant-floor automation projects. Ensure MES functionality aligns with food safety, traceability, and regulatory compliance requirements. Assist in standardizing manufacturing processes across multiple production lines or facilities. Reporting & Data Management Create and maintain SQL queries, reports, KPIs, and production analytics. Develop real-time dashboards and visualizations for plant operations and leadership teams. Support historical data collection and reporting for audits, investigations, and compliance tracking. Validate manufacturing data integrity and troubleshoot data flow issues. Compliance & Documentation Maintain documentation for MES configurations, SOPs, workflows, validation protocols, and system changes. Support compliance with FDA, USDA, HACCP, SQF, GMP, and internal quality standards. Participate in change management, system testing, validation, and deployment activities. Assist with user training and development of work instructions. Required Qualifications • Deep understanding of Ignition or similar MES. • Understanding of manufacturing operations including batching, packaging, filling, mixing, and material traceability. • Familiarity with industrial automation systems and controls architecture. • Strong troubleshooting, analytical, and communication skills. • Lean Manufacturing or Six Sigma experience. • Experience supporting multi-site manufacturing operations. Education and/or Experience • Bachelor's degree in Engineering, Information Systems, Computer Science, Industrial Technology, Food Science, or related field. • 3+ years of MES, SCADA, or manufacturing systems experience in a production environment. • Hands-on experience with the Ignition platform by Inductive Automation or similar MES. • Experience in food and/or beverage manufacturing strongly preferred. Work Authorization Notice: Please note that we do not provide visa sponsorship or immigration support for this position. Applicants must already be authorized to work in the United States on a full-time, permanent basis without the need for current or future sponsorship. The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $110K-135k annually.
10/27/2026
Full time
SUMMARY We are seeking a highly motivated MES Analyst with experience in food manufacturing and the Ignition platform or similar MES to support, enhance, and optimize manufacturing execution systems across production operations. This role will serve as a key technical resource responsible for MES configuration, data integration, production reporting, and continuous improvement initiatives within a regulated food manufacturing environment. The ideal candidate combines manufacturing systems expertise with strong operational knowledge of food production processes, traceability requirements, and industrial automation systems. This role is 100% onsite in Marlborough, MA. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: The MES Analyst will be responsible for overseeing the adoption/development/and support of Ken's Foods Manufacturing Execution System. This person will be tasked with being a subject matter expert on all facets of the system and work to ensure adoption and best practices across the organization. They will act as the key liaison between the corporate and plant floor teams, the technical development team, and the senior management team. They will work to provide training and assistance with the MES system. MES & Ignition Platform Support Administer, configure, and support the Ignition platform for manufacturing execution and operational visibility. Develop and maintain Ignition projects, including: Production dashboards Downtime tracking OEE monitoring Recipe management Electronic batch records Traceability applications Quality and production reporting Troubleshoot MES and Ignition-related issues affecting manufacturing operations. Manage system integrations between Ignition, PLCs, SCADA systems, historians, ERP systems, and databases. Support gateway administration, tag management, alarming, scripting, and user security within Ignition. Manufacturing & Operations Support Partner with operations, QA, maintenance, engineering, and IT teams to improve manufacturing efficiency and data accuracy. Analyze manufacturing data to identify trends, bottlenecks, downtime causes, and process improvement opportunities. Support digital transformation initiatives and plant-floor automation projects. Ensure MES functionality aligns with food safety, traceability, and regulatory compliance requirements. Assist in standardizing manufacturing processes across multiple production lines or facilities. Reporting & Data Management Create and maintain SQL queries, reports, KPIs, and production analytics. Develop real-time dashboards and visualizations for plant operations and leadership teams. Support historical data collection and reporting for audits, investigations, and compliance tracking. Validate manufacturing data integrity and troubleshoot data flow issues. Compliance & Documentation Maintain documentation for MES configurations, SOPs, workflows, validation protocols, and system changes. Support compliance with FDA, USDA, HACCP, SQF, GMP, and internal quality standards. Participate in change management, system testing, validation, and deployment activities. Assist with user training and development of work instructions. Required Qualifications • Deep understanding of Ignition or similar MES. • Understanding of manufacturing operations including batching, packaging, filling, mixing, and material traceability. • Familiarity with industrial automation systems and controls architecture. • Strong troubleshooting, analytical, and communication skills. • Lean Manufacturing or Six Sigma experience. • Experience supporting multi-site manufacturing operations. Education and/or Experience • Bachelor's degree in Engineering, Information Systems, Computer Science, Industrial Technology, Food Science, or related field. • 3+ years of MES, SCADA, or manufacturing systems experience in a production environment. • Hands-on experience with the Ignition platform by Inductive Automation or similar MES. • Experience in food and/or beverage manufacturing strongly preferred. Work Authorization Notice: Please note that we do not provide visa sponsorship or immigration support for this position. Applicants must already be authorized to work in the United States on a full-time, permanent basis without the need for current or future sponsorship. The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $110K-135k annually.
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions PRINCIPAL SPACECRAFT OPERATIONS ENGINEER II- SECRET CLEARANCE Based on site at Rocket Lab's headquarters in Long Beach, CA the PrincipalSpacecraft Operations Engineer is responsible for ensuring the health, safety, and optimal performance of a growing fleet of satellites while meeting mission objectives and SLAs for both commercial and government customers. This includes supporting diverse missions such as LEO constellations, interplanetary exploration, LEO rendezvous, and SDA-related deployments. Your expertise would be critical during commissioning, orbit raising, routine operations, and potentially re-entry phases, ensuring the health and safety of Rocket Lab's expanding fleet. The Spacecraft Operations team works closely with related teams, such as spacecraft design, AIT, flight software, propulsion, GNC, flight dynamics and ground software development to help improve both the ground and satellite-based capabilities over time. The space operations experience at Rocket Lab is unique because you will cover a multitude of roles/positions and responsibilities, with the large majority of the technical products being supplied through the vertical integration/in-house. WHAT YOU'LL GET TO DO: Serve as the program's mission operations technical lead: set the technical direction and strategy for operations, plan and prioritize the work of the mission operations staff, and act as the primary operations point of contact for program-level design decisions and trades Advocate for operability across the program: influence spacecraft and ground architecture upstream so vehicles are designed to be operated safely, efficiently, and autonomously, and push for changes to program design and execution when operational needs demand it Own mission operations requirements and lead requirements validation and verification for spacecraft missions and system-level capability and function Define the automation strategy and lead the development of robust, software-driven methods for mission operations, testing, and data analysis to ensure efficient, repeatable, and reliable spacecraft operation Design, develop, and test flight software sequences and FDIR/telemetry configurations to ensure spacecraft health and fault management through software-driven processes Architect, develop, and test ground software for long-duration operations, including scripting and automation frameworks that make operations robust, hands-off, and scalable across a growing fleet Establish and steward the integration, testing, and maintenance of mission operations tooling and codebases, including CI, version control, and release discipline. Ensure the on-call or shift schedules of operations Author and own interface specifications, CONOPS, contingency procedures, and other operational design documents Lead validation of flight products and procedures against spacecraft simulation tools, including flatsat, HITL, SIL, and digital twins Support AIT teams across multiple spacecraft integrated tests (TVAC, propulsion stack, DITL Provide program and product support to team leads and program managers, and serve as a key technical interface between the NZ and USA engineering teams Represent mission operations in program milestone reviews, design reviews, and readiness gates, and drive continuous improvement through post-mission lessons learned YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPALSPACECRAFT OPERATIONS ENGINEER: Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) 12+ years of direct experience in any of the following: space mission design, satellite subsystems, ground systems, spacecraft command control, or spacecraft operations 5+ years of experience leading teams of engineers through spacecraft missions or related aerospace projects Previous experience in roles such as Mission Lead, Mission Director, Flight Director, or Senior Spacecraft Operations Engineer Previous experience supporting mission operations activities in an on-console or operator-in-the-loop capacity Thorough understanding of key spacecraft subsystems and associated components, including attitude determination and control systems (ADCS), electrical power systems (EPS), space-to-ground communications, command and data handling (C&DH), thermal control systems (TCS), spacecraft propulsion systems, and fault detection, isolation, and recovery (FDIR) Understanding of the space environment, orbital mechanics, and rigid body dynamics 5+ years of direct software development experience (Python/Ruby/C/C++/other high-level languages), covering items such as spacecraft onboard flight scripts, ground scripting and automation, and data manipulation and analysis US citizenship is required due to program requirements Active U.S. Government Secret Security Clearance THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master's or PhD engineering in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) Prior experience in spacecraft operations Prior experience in satellite system design Prior experience in satellite ground systems Exposure to modern development practices - GIT, CI/CD, cloud infrastructure Proficiency with Agile issue-tracking tools, specifically Jira, for mission task management, status tracking, and bug reporting Software-in-the-Loop (SIL) Testing: Exposure to testing frameworks that simulate software behavior in operational environments. Hardware-in-the-Loop (HIL) Testing: Familiarity with testing frameworks that integrate software and hardware systems. Active TS/SCI U.S. Government Security Clearance This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package, giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $223,025-$339,400 USD Base Salary $173,300-$259,850 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: . click apply for full job details
10/27/2026
Full time
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions PRINCIPAL SPACECRAFT OPERATIONS ENGINEER II- SECRET CLEARANCE Based on site at Rocket Lab's headquarters in Long Beach, CA the PrincipalSpacecraft Operations Engineer is responsible for ensuring the health, safety, and optimal performance of a growing fleet of satellites while meeting mission objectives and SLAs for both commercial and government customers. This includes supporting diverse missions such as LEO constellations, interplanetary exploration, LEO rendezvous, and SDA-related deployments. Your expertise would be critical during commissioning, orbit raising, routine operations, and potentially re-entry phases, ensuring the health and safety of Rocket Lab's expanding fleet. The Spacecraft Operations team works closely with related teams, such as spacecraft design, AIT, flight software, propulsion, GNC, flight dynamics and ground software development to help improve both the ground and satellite-based capabilities over time. The space operations experience at Rocket Lab is unique because you will cover a multitude of roles/positions and responsibilities, with the large majority of the technical products being supplied through the vertical integration/in-house. WHAT YOU'LL GET TO DO: Serve as the program's mission operations technical lead: set the technical direction and strategy for operations, plan and prioritize the work of the mission operations staff, and act as the primary operations point of contact for program-level design decisions and trades Advocate for operability across the program: influence spacecraft and ground architecture upstream so vehicles are designed to be operated safely, efficiently, and autonomously, and push for changes to program design and execution when operational needs demand it Own mission operations requirements and lead requirements validation and verification for spacecraft missions and system-level capability and function Define the automation strategy and lead the development of robust, software-driven methods for mission operations, testing, and data analysis to ensure efficient, repeatable, and reliable spacecraft operation Design, develop, and test flight software sequences and FDIR/telemetry configurations to ensure spacecraft health and fault management through software-driven processes Architect, develop, and test ground software for long-duration operations, including scripting and automation frameworks that make operations robust, hands-off, and scalable across a growing fleet Establish and steward the integration, testing, and maintenance of mission operations tooling and codebases, including CI, version control, and release discipline. Ensure the on-call or shift schedules of operations Author and own interface specifications, CONOPS, contingency procedures, and other operational design documents Lead validation of flight products and procedures against spacecraft simulation tools, including flatsat, HITL, SIL, and digital twins Support AIT teams across multiple spacecraft integrated tests (TVAC, propulsion stack, DITL Provide program and product support to team leads and program managers, and serve as a key technical interface between the NZ and USA engineering teams Represent mission operations in program milestone reviews, design reviews, and readiness gates, and drive continuous improvement through post-mission lessons learned YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPALSPACECRAFT OPERATIONS ENGINEER: Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) 12+ years of direct experience in any of the following: space mission design, satellite subsystems, ground systems, spacecraft command control, or spacecraft operations 5+ years of experience leading teams of engineers through spacecraft missions or related aerospace projects Previous experience in roles such as Mission Lead, Mission Director, Flight Director, or Senior Spacecraft Operations Engineer Previous experience supporting mission operations activities in an on-console or operator-in-the-loop capacity Thorough understanding of key spacecraft subsystems and associated components, including attitude determination and control systems (ADCS), electrical power systems (EPS), space-to-ground communications, command and data handling (C&DH), thermal control systems (TCS), spacecraft propulsion systems, and fault detection, isolation, and recovery (FDIR) Understanding of the space environment, orbital mechanics, and rigid body dynamics 5+ years of direct software development experience (Python/Ruby/C/C++/other high-level languages), covering items such as spacecraft onboard flight scripts, ground scripting and automation, and data manipulation and analysis US citizenship is required due to program requirements Active U.S. Government Secret Security Clearance THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master's or PhD engineering in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) Prior experience in spacecraft operations Prior experience in satellite system design Prior experience in satellite ground systems Exposure to modern development practices - GIT, CI/CD, cloud infrastructure Proficiency with Agile issue-tracking tools, specifically Jira, for mission task management, status tracking, and bug reporting Software-in-the-Loop (SIL) Testing: Exposure to testing frameworks that simulate software behavior in operational environments. Hardware-in-the-Loop (HIL) Testing: Familiarity with testing frameworks that integrate software and hardware systems. Active TS/SCI U.S. Government Security Clearance This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package, giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $223,025-$339,400 USD Base Salary $173,300-$259,850 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: . click apply for full job details
This job is with Gilead Sciences Inc., an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. At Gilead, we're creating a healthier world for all people. For more than 35 years, we've tackled diseases such as HIV, viral hepatitis, COVID-19 and cancer - working relentlessly to develop therapies that help improve lives and to ensure access to these therapies across the globe. We continue to fight against the world's biggest health challenges, and our mission requires collaboration, determination and a relentless drive to make a difference. Every member of Gilead's team plays a critical role in the discovery and development of life-changing scientific innovations. Our employees are our greatest asset as we work to achieve our bold ambitions, and we're looking for the next wave of passionate and ambitious people ready to make a direct impact. We believe every employee deserves a great leader. People Leaders are the cornerstone to the employee experience at Gilead and Kite. As a people leader now or in the future, you are the key driver in evolving our culture and creating an environment where every employee feels included, developed and empowered to fulfil their aspirations. Join Gilead and help create possible, together. Job Description Gilead Sciences is seeking a collaborative, hands-on leader to shape and deliver the ERP capabilities for a new, next-generation bulk drug substance manufacturing facility at our Foster City site. As the site's SAP business lead, you will translate operational needs into integrated processes across production, procurement, quality, and warehousing. Working closely with site stakeholders and the IT implementation team, you will define requirements, guide implementation, and connect SAP with other digital platforms to help create a compliant, paperless manufacturing environment. Required skills: Hands-on experience in warehousing, materials management, or production operations within a biologics or other GMP-regulated manufacturing environment. Strong systems expertise, including experience implementing an ERP platform such as SAP and leading the associated organizational change. A process-builder mindset, with the ability to move confidently from strategy and design to hands-on execution. Proven cross-functional leadership and the ability to align engineering, quality, materials management, manufacturing, and IT teams. A strong commitment to quality, cGMP compliance, operational excellence, and positive patient impact. Job Responsibilities: Own the digital backbone for materials Lead the design and implementation of SAP and supporting systems, bridging warehousing, logistics, and manufacturing execution to deliver a fully integrated, digital operation. Deliver across construction and systems build Align timelines and business deliverables between the digital infrastructure and the associated new facility construction to ensure a smooth startup. Drive a paperless, future-ready environment Champion digital transformation by implementing streamlined, compliant, and data-driven processes that eliminate paper and improve efficiency. Establish core material handling processes Define user requirements, use cases and process flows, procedures and training to ensure the ERP and integrated systems are qualified and ready to support GMP operations at launch. Integrate with existing operations Collaborate with established manufacturing sites to leverage best practices, ensure system consistency, and enable organizational alignment across sites. Influence future ERP footprint Support future enterprise ERP projects, representing the Foster City site manufacturing organization. Qualifications: Requires a Master's degree with 6+ years of relevant professional experience, or BS with 8+ years of relevant professional experience - a degree in a relevant scientific or business discipline is strongly preferred. Excellent organizational and communication (both written and verbal) skills. Experience in pharmaceutical operations/cGMP environment highly desirable. The ideal candidate would also have: Proven experience using and implementing SAP in a manufacturing or life sciences environment. Strong understanding of clinical and commercial manufacturing operations and warehouse management. Strategic thinking and ability to influence and constructively challenge the status quo. The salary range for this position is: $157,590.00 - $203,940.00. Gilead considers a variety of factors when determining base compensation, including experience, qualifications, and geographic location. These considerations mean actual compensation will vary. This position may also be eligible for a discretionary annual bonus, discretionary stock-based long-term incentives (eligibility may vary based on role), paid time off, and a benefits package. Benefits include company-sponsored medical, dental, vision, and life insurance plans . For additional benefits information, visit: Eligible employees may participate in benefit plans, subject to the terms and conditions of the applicable plans. For jobs in the United States: Gilead Sciences Inc. is committed to providing equal employment opportunities to all employees and applicants for employment, and is dedicated to fostering an inclusive work environment comprised of diverse perspectives, backgrounds, and experiences. Employment decisions regarding recruitment and selection will be made without discrimination based on race, color, religion, national origin, sex , age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, or other non-job related characteristics or other prohibited grounds specified in applicable federal, state and local laws. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact for assistance. For more information about equal employment opportunity protections, please view the 'Know Your Rights' poster. NOTICE: EMPLOYEE POLYGRAPH PROTECTION ACT YOUR RIGHTS UNDER THE FAMILY AND MEDICAL LEAVE ACT Gilead Sciences will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, (c) consistent with the legal duty to furnish information; or (d) otherwise protected by law. Our environment respects individual differences and recognizes each employee as an integral member of our company. Our workforce reflects these values and celebrates the individuals who make up our growing team. Gilead provides a work environment free of harassment and prohibited conduct. We promote and support individual differences and diversity of thoughts and opinion. For Current Gilead Employees and Contractors: Please apply via the Internal Career Opportunities portal in Workday.
10/27/2026
Full time
This job is with Gilead Sciences Inc., an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. At Gilead, we're creating a healthier world for all people. For more than 35 years, we've tackled diseases such as HIV, viral hepatitis, COVID-19 and cancer - working relentlessly to develop therapies that help improve lives and to ensure access to these therapies across the globe. We continue to fight against the world's biggest health challenges, and our mission requires collaboration, determination and a relentless drive to make a difference. Every member of Gilead's team plays a critical role in the discovery and development of life-changing scientific innovations. Our employees are our greatest asset as we work to achieve our bold ambitions, and we're looking for the next wave of passionate and ambitious people ready to make a direct impact. We believe every employee deserves a great leader. People Leaders are the cornerstone to the employee experience at Gilead and Kite. As a people leader now or in the future, you are the key driver in evolving our culture and creating an environment where every employee feels included, developed and empowered to fulfil their aspirations. Join Gilead and help create possible, together. Job Description Gilead Sciences is seeking a collaborative, hands-on leader to shape and deliver the ERP capabilities for a new, next-generation bulk drug substance manufacturing facility at our Foster City site. As the site's SAP business lead, you will translate operational needs into integrated processes across production, procurement, quality, and warehousing. Working closely with site stakeholders and the IT implementation team, you will define requirements, guide implementation, and connect SAP with other digital platforms to help create a compliant, paperless manufacturing environment. Required skills: Hands-on experience in warehousing, materials management, or production operations within a biologics or other GMP-regulated manufacturing environment. Strong systems expertise, including experience implementing an ERP platform such as SAP and leading the associated organizational change. A process-builder mindset, with the ability to move confidently from strategy and design to hands-on execution. Proven cross-functional leadership and the ability to align engineering, quality, materials management, manufacturing, and IT teams. A strong commitment to quality, cGMP compliance, operational excellence, and positive patient impact. Job Responsibilities: Own the digital backbone for materials Lead the design and implementation of SAP and supporting systems, bridging warehousing, logistics, and manufacturing execution to deliver a fully integrated, digital operation. Deliver across construction and systems build Align timelines and business deliverables between the digital infrastructure and the associated new facility construction to ensure a smooth startup. Drive a paperless, future-ready environment Champion digital transformation by implementing streamlined, compliant, and data-driven processes that eliminate paper and improve efficiency. Establish core material handling processes Define user requirements, use cases and process flows, procedures and training to ensure the ERP and integrated systems are qualified and ready to support GMP operations at launch. Integrate with existing operations Collaborate with established manufacturing sites to leverage best practices, ensure system consistency, and enable organizational alignment across sites. Influence future ERP footprint Support future enterprise ERP projects, representing the Foster City site manufacturing organization. Qualifications: Requires a Master's degree with 6+ years of relevant professional experience, or BS with 8+ years of relevant professional experience - a degree in a relevant scientific or business discipline is strongly preferred. Excellent organizational and communication (both written and verbal) skills. Experience in pharmaceutical operations/cGMP environment highly desirable. The ideal candidate would also have: Proven experience using and implementing SAP in a manufacturing or life sciences environment. Strong understanding of clinical and commercial manufacturing operations and warehouse management. Strategic thinking and ability to influence and constructively challenge the status quo. The salary range for this position is: $157,590.00 - $203,940.00. Gilead considers a variety of factors when determining base compensation, including experience, qualifications, and geographic location. These considerations mean actual compensation will vary. This position may also be eligible for a discretionary annual bonus, discretionary stock-based long-term incentives (eligibility may vary based on role), paid time off, and a benefits package. Benefits include company-sponsored medical, dental, vision, and life insurance plans . For additional benefits information, visit: Eligible employees may participate in benefit plans, subject to the terms and conditions of the applicable plans. For jobs in the United States: Gilead Sciences Inc. is committed to providing equal employment opportunities to all employees and applicants for employment, and is dedicated to fostering an inclusive work environment comprised of diverse perspectives, backgrounds, and experiences. Employment decisions regarding recruitment and selection will be made without discrimination based on race, color, religion, national origin, sex , age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, or other non-job related characteristics or other prohibited grounds specified in applicable federal, state and local laws. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact for assistance. For more information about equal employment opportunity protections, please view the 'Know Your Rights' poster. NOTICE: EMPLOYEE POLYGRAPH PROTECTION ACT YOUR RIGHTS UNDER THE FAMILY AND MEDICAL LEAVE ACT Gilead Sciences will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, (c) consistent with the legal duty to furnish information; or (d) otherwise protected by law. Our environment respects individual differences and recognizes each employee as an integral member of our company. Our workforce reflects these values and celebrates the individuals who make up our growing team. Gilead provides a work environment free of harassment and prohibited conduct. We promote and support individual differences and diversity of thoughts and opinion. For Current Gilead Employees and Contractors: Please apply via the Internal Career Opportunities portal in Workday.
This job is with Reckitt, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. We are Reckitt Home to the world's best loved and trusted hygiene, health, and nutrition brands. Our purpose defines why we exist: to protect, heal and nurture in the relentless pursuit of a cleaner, healthier world. We are a global team united by this purpose.Join us in our fight to make access to the highest quality hygiene, wellness, and nourishment a right and not a privilege. Our supply chain is the backbone of our business. It's how we get our trusted products to people all over the world, safely and efficiently. And it's our talented and passionate teams that make this happen.If you're looking for a career in supply chain, there's no better place to be than Reckitt. We offer a variety of exciting opportunities in all areas of the supply chain, from planning and procurement to manufacturing and logistics. You could join our Global Supply Planning team to develop and implement our global supply strategy, or work with our Procurement Centre of Excellence team to negotiate and manage our supplier relationships.Our Manufacturing Excellence team help us improve the efficiency, quality and safety of our manufacturing operations, and our Logistics Excellence team develop new and innovative ways to distribute our products to customers. About the role The purpose of this role is to develop and deploy Global Asset Standards for Household Care & Germ Protection Processing Technology for common production equipment within the Reckitt group, across the Household Care & Germ Protection categories and all geographies. The Global Technology Engineer will provide technical leadership, expertise, and support for equipment and systems related to processing technology for liquids and gels manufacturing, and own standardisation of equipment and vendor pool to leverage cost, lead time, efficiency and best practices. This is to support compliant, reliable, and efficient operation of processing equipment in line with regulatory requirements (e.g. GMP, ATEX) and business objectives. The role requires the ability to work in a cross-functional matrix organisation, fostering a continuous improvement culture, with close collaboration with factories for effective implementation of equipment standards. This role is not currently sponsoring visas or considering international movement at this time! Your responsibilities Equipment Standardisation Processes - Lead global standardization of Household Care & Germ Protection processing equipment by aligning equipment specifications, CAPEX purchasing standards, and preferred vendor networks across all regions. Engineering Equipment Standards - Develop, maintain, and continuously improve global equipment standards and URSs in partnership with OEMs, Procurement, and Technical teams to enhance safety, quality, performance, compliance, and reliability. Technical Expertise - Serve as the subject matter expert for Household Care & Germ Protection processing technologies, providing technical guidance while staying current on industry innovations and regulatory requirements. Project Delivery - Provide technical leadership on major CAPEX projects, including URS development, vendor selection, equipment acceptance testing (FAT/SAT), and project execution support across global sites. Compliance & Validation - Ensure processing systems meet hygienic design, GMP, and regulatory standards while supporting commissioning, validation, qualification, and equipment acceptance activities. Vendor Management - Manage strategic OEM relationships by monitoring supplier performance, equipment reliability, lifecycle management, and continuous improvement opportunities. Project Support - Act as the global "go-to" engineering expert, supporting sites with capital projects, supplier selection, technology upgrades, system integrations, and vendor collaboration. The experience we're looking for Proven experience driving equipment standardization across manufacturing sites, preferably in multi-site or global environments. Demonstrated experience managing CAPEX projects, including project prioritization, budgeting, performance monitoring, and execution. Deep technical knowledge of Household Care/Germ Protection processing technologies, including mixers, batching, CIP/Pigging, pumps, valves, powder handling, ATEX standards, and corrosive-material processing. Understanding of process utilities such as water, HVAC, steam/hot water, drainage, compressed air, power, and data networking systems. Minimum 7 years of engineering experience, including 2+ years in a senior engineering or project leadership role within the consumer goods or chemical industry. Bachelor's degree in Engineering (or equivalent experience), proficiency with engineering software (e.g., AutoCAD), and willingness to travel globally as required. The skills for success Strong knowledge of processing equipment and manufacturing technologies, with the ability to apply technical understanding to drive equipment standardization, reliability, safety, and performance improvements across global operations. Strong project leadership and stakeholder management skills, enabling successful delivery of CAPEX initiatives while collaborating effectively with cross-functional teams, suppliers, and manufacturing sites. Continuous improvement and problem-solving mindset, using data, industry best practices, and regulatory requirements to optimize processes, enhance compliance, and support business growth. What we offer With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way.We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy. US salary ranges currency salaryMin - salaryMax US pay transparency The base salary range for this role will vary based on experience in job and industry, training and education, skills relevant to the position, and other factors permitted by law. In addition to the base salary, the position is eligible for an annual discretionary bonus, which is subject to change each year. Reckitt offers eligible employees competitive benefits including medical, prescription, dental, vision, and life and disability insurance; paid time off for vacation, sick and Company recognized holidays; a 401(k) plan; 16-week paid parental leave or 26 weeks for the birthing parent; adoption and fertility support; tuition reimbursement; discounts; and much more. Our compensation and benefits packages aim to give our talent the reward, protection, and peace of mind they deserve. Equality We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law. If reasonable accommodation is needed to complete your application, please contact . Reckitt is committed to the full inclusion of all qualified individuals.
10/27/2026
Full time
This job is with Reckitt, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. We are Reckitt Home to the world's best loved and trusted hygiene, health, and nutrition brands. Our purpose defines why we exist: to protect, heal and nurture in the relentless pursuit of a cleaner, healthier world. We are a global team united by this purpose.Join us in our fight to make access to the highest quality hygiene, wellness, and nourishment a right and not a privilege. Our supply chain is the backbone of our business. It's how we get our trusted products to people all over the world, safely and efficiently. And it's our talented and passionate teams that make this happen.If you're looking for a career in supply chain, there's no better place to be than Reckitt. We offer a variety of exciting opportunities in all areas of the supply chain, from planning and procurement to manufacturing and logistics. You could join our Global Supply Planning team to develop and implement our global supply strategy, or work with our Procurement Centre of Excellence team to negotiate and manage our supplier relationships.Our Manufacturing Excellence team help us improve the efficiency, quality and safety of our manufacturing operations, and our Logistics Excellence team develop new and innovative ways to distribute our products to customers. About the role The purpose of this role is to develop and deploy Global Asset Standards for Household Care & Germ Protection Processing Technology for common production equipment within the Reckitt group, across the Household Care & Germ Protection categories and all geographies. The Global Technology Engineer will provide technical leadership, expertise, and support for equipment and systems related to processing technology for liquids and gels manufacturing, and own standardisation of equipment and vendor pool to leverage cost, lead time, efficiency and best practices. This is to support compliant, reliable, and efficient operation of processing equipment in line with regulatory requirements (e.g. GMP, ATEX) and business objectives. The role requires the ability to work in a cross-functional matrix organisation, fostering a continuous improvement culture, with close collaboration with factories for effective implementation of equipment standards. This role is not currently sponsoring visas or considering international movement at this time! Your responsibilities Equipment Standardisation Processes - Lead global standardization of Household Care & Germ Protection processing equipment by aligning equipment specifications, CAPEX purchasing standards, and preferred vendor networks across all regions. Engineering Equipment Standards - Develop, maintain, and continuously improve global equipment standards and URSs in partnership with OEMs, Procurement, and Technical teams to enhance safety, quality, performance, compliance, and reliability. Technical Expertise - Serve as the subject matter expert for Household Care & Germ Protection processing technologies, providing technical guidance while staying current on industry innovations and regulatory requirements. Project Delivery - Provide technical leadership on major CAPEX projects, including URS development, vendor selection, equipment acceptance testing (FAT/SAT), and project execution support across global sites. Compliance & Validation - Ensure processing systems meet hygienic design, GMP, and regulatory standards while supporting commissioning, validation, qualification, and equipment acceptance activities. Vendor Management - Manage strategic OEM relationships by monitoring supplier performance, equipment reliability, lifecycle management, and continuous improvement opportunities. Project Support - Act as the global "go-to" engineering expert, supporting sites with capital projects, supplier selection, technology upgrades, system integrations, and vendor collaboration. The experience we're looking for Proven experience driving equipment standardization across manufacturing sites, preferably in multi-site or global environments. Demonstrated experience managing CAPEX projects, including project prioritization, budgeting, performance monitoring, and execution. Deep technical knowledge of Household Care/Germ Protection processing technologies, including mixers, batching, CIP/Pigging, pumps, valves, powder handling, ATEX standards, and corrosive-material processing. Understanding of process utilities such as water, HVAC, steam/hot water, drainage, compressed air, power, and data networking systems. Minimum 7 years of engineering experience, including 2+ years in a senior engineering or project leadership role within the consumer goods or chemical industry. Bachelor's degree in Engineering (or equivalent experience), proficiency with engineering software (e.g., AutoCAD), and willingness to travel globally as required. The skills for success Strong knowledge of processing equipment and manufacturing technologies, with the ability to apply technical understanding to drive equipment standardization, reliability, safety, and performance improvements across global operations. Strong project leadership and stakeholder management skills, enabling successful delivery of CAPEX initiatives while collaborating effectively with cross-functional teams, suppliers, and manufacturing sites. Continuous improvement and problem-solving mindset, using data, industry best practices, and regulatory requirements to optimize processes, enhance compliance, and support business growth. What we offer With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way.We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy. US salary ranges currency salaryMin - salaryMax US pay transparency The base salary range for this role will vary based on experience in job and industry, training and education, skills relevant to the position, and other factors permitted by law. In addition to the base salary, the position is eligible for an annual discretionary bonus, which is subject to change each year. Reckitt offers eligible employees competitive benefits including medical, prescription, dental, vision, and life and disability insurance; paid time off for vacation, sick and Company recognized holidays; a 401(k) plan; 16-week paid parental leave or 26 weeks for the birthing parent; adoption and fertility support; tuition reimbursement; discounts; and much more. Our compensation and benefits packages aim to give our talent the reward, protection, and peace of mind they deserve. Equality We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law. If reasonable accommodation is needed to complete your application, please contact . Reckitt is committed to the full inclusion of all qualified individuals.
Description: JOB DESCRIPTION Job Title: Applications Engineer ABOUT OMI INDUSTRIES At OMI Industries, we are committed to using the natural power of plant oils to produce safe, natural, and effective odor removing products without the use of harsh chemicals or artificial fragrances. With over 30 years of expertise, OMI is the world leader in manufacturing natural odor eliminating solutions for industrial, commercial, and consumer applications. We are looking for a motivated Applications Engineer to join our growing Ecosorb team! JOB PURPOSE The Applications Engineer will organize and manage Ecosorb treatment applications and design approaches to treat customer odors using Ecosorb. This role will work to grow into an odor control expert with an understanding of the application of existing odor control technologies in different scenarios and industries. This individual will report to OMI's Director of Industrial Sales and will collaborate with Research & Development, Operations, Sales, and Service team members. JOB RESPONSIBILITY SUMMARY Analyze customer sites via 3D models, drawings, Google Earth, Photos, Sales/Field Tech notes, and onsite visits. Provide necessary details to drafter for application drawing. Combine theoretical, practical, and testing to achieve the best possible outcomes for our customers. Recommend the best approach to fight odors with Ecosorb treatment. Combine theoretical, practical, and testing to achieve the best possible outcomes for our customers. Travel to customer sites to learn about, evaluate, and improve odor treatment applications. Prepare and deliver presentations about Ecosorb solutions and their effectiveness. Develop techniques to assess and validate the application designs. Manage and update customer application information in Salesforce CRM system. Troubleshoot systems and make small repairs on-site as needed with support from equipment team. Recommend improved application approaches, chemistry and/or equipment, to customers and explain how changes will increase efficiency. Evaluate competitive odor control technology and build comparisons data sets, such as pro/con, strengths/weaknesses, and application area focuses. Collaborate with the Equipment team, Service team, R&D, and Director of Industrial Sales to create efficient systems. Other duties as assigned. Requirements: KEY COMPETENCIES: Systems thinker; able to look at a complex process, understand what the variables are, and how to adjust the variables to reach your desired result. Application engineering and solution architecture: take vague information from customers and sales and translate that into an application approach with clear variable and risk definitions Communication: Articulating thoughts and ideas clearly and effectively in written and oral forms to people of ranging skillsets. People skills: Building relationships and effectively communicating with other members of the OMI team. Time management: Ability to hold self and others accountable for key deliverables. Mechanical aptitude: base knowledge of tools and parts. REQUIRED KNOWLEDGE, SKILLS, & ABILITIES (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and ability required.) Bachelor's degree in chemical engineering, or equivalent educational experience in Chemistry, Fluid Dynamics, and Thermodynamics. 0+ years' experience. Proficient in all Microsoft Office suite; Word, Excel, PowerPoint, OneNote, Teams. Ability to learn new software systems such as Salesforce CRM, Photogrammetry, SolidWorks, etc. Understanding of fluid dynamics, chemistry, physics, math, and construction applied to product design and systems. Ability to write presentations, letters, and formulate proposals. Collaborative approach with ability to lead across and communicate with all types of functions. (Sales, Marketing, Finance, Operations, Human Resources, Senior Leadership, etc.). TRAVEL/ATTENDANCE: Applications Engineer will work in our Palatine, IL office. Hybrid Schedule of Monday/Friday Remote and Tuesday-Thursday in the office. Frequent travel is required to visit customers, attend trade shows and participate in internal meetings. The expected overnight CH1 travel in this position is 4-6 days per month but may fluctuate based on business needs. PHYSICAL REQUIREMENTS/HAZARDOUS WORKING CONDITIONS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential work functions.) OMI Industries manufactures odor eliminating solutions. Chemical exposure to raw materials including plant oils, fragrances, and other materials will occur. The employee will be expected to travel to customer sites including but not limited to asphalt plants, wastewater treatment facilities, and industrial refineries. The employee will be regularly required to sit; stand; walk; bend; climb; kneel; crouch; and reach using feet, legs, back, arms, hands; to talk and hear. The employee must be capable of wearing required Personal Protective Equipment such as hard hats, safety glasses, gloves, steel-toed boots, hearing protection, and respiratory protection (including face masks and respirators). While on customer sites, the employee must be able to ascend/descend ladders and stairs, access rooftops, confined spaces, and uneven terrain. The employee must be able to adhere to, evaluate, and act on safety protocols. They must have a tolerance for the state of sites (I.e., smell, odor, dirt). Must possess the ability to detect auditory and/or visual alarms. WORK ENVIRONMENT: Work may be outdoors in a variety of weather conditions and environments with potential exposure to moving mechanical parts, hazardous substances, and biological waste. PIf79a6-
10/27/2026
Full time
Description: JOB DESCRIPTION Job Title: Applications Engineer ABOUT OMI INDUSTRIES At OMI Industries, we are committed to using the natural power of plant oils to produce safe, natural, and effective odor removing products without the use of harsh chemicals or artificial fragrances. With over 30 years of expertise, OMI is the world leader in manufacturing natural odor eliminating solutions for industrial, commercial, and consumer applications. We are looking for a motivated Applications Engineer to join our growing Ecosorb team! JOB PURPOSE The Applications Engineer will organize and manage Ecosorb treatment applications and design approaches to treat customer odors using Ecosorb. This role will work to grow into an odor control expert with an understanding of the application of existing odor control technologies in different scenarios and industries. This individual will report to OMI's Director of Industrial Sales and will collaborate with Research & Development, Operations, Sales, and Service team members. JOB RESPONSIBILITY SUMMARY Analyze customer sites via 3D models, drawings, Google Earth, Photos, Sales/Field Tech notes, and onsite visits. Provide necessary details to drafter for application drawing. Combine theoretical, practical, and testing to achieve the best possible outcomes for our customers. Recommend the best approach to fight odors with Ecosorb treatment. Combine theoretical, practical, and testing to achieve the best possible outcomes for our customers. Travel to customer sites to learn about, evaluate, and improve odor treatment applications. Prepare and deliver presentations about Ecosorb solutions and their effectiveness. Develop techniques to assess and validate the application designs. Manage and update customer application information in Salesforce CRM system. Troubleshoot systems and make small repairs on-site as needed with support from equipment team. Recommend improved application approaches, chemistry and/or equipment, to customers and explain how changes will increase efficiency. Evaluate competitive odor control technology and build comparisons data sets, such as pro/con, strengths/weaknesses, and application area focuses. Collaborate with the Equipment team, Service team, R&D, and Director of Industrial Sales to create efficient systems. Other duties as assigned. Requirements: KEY COMPETENCIES: Systems thinker; able to look at a complex process, understand what the variables are, and how to adjust the variables to reach your desired result. Application engineering and solution architecture: take vague information from customers and sales and translate that into an application approach with clear variable and risk definitions Communication: Articulating thoughts and ideas clearly and effectively in written and oral forms to people of ranging skillsets. People skills: Building relationships and effectively communicating with other members of the OMI team. Time management: Ability to hold self and others accountable for key deliverables. Mechanical aptitude: base knowledge of tools and parts. REQUIRED KNOWLEDGE, SKILLS, & ABILITIES (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and ability required.) Bachelor's degree in chemical engineering, or equivalent educational experience in Chemistry, Fluid Dynamics, and Thermodynamics. 0+ years' experience. Proficient in all Microsoft Office suite; Word, Excel, PowerPoint, OneNote, Teams. Ability to learn new software systems such as Salesforce CRM, Photogrammetry, SolidWorks, etc. Understanding of fluid dynamics, chemistry, physics, math, and construction applied to product design and systems. Ability to write presentations, letters, and formulate proposals. Collaborative approach with ability to lead across and communicate with all types of functions. (Sales, Marketing, Finance, Operations, Human Resources, Senior Leadership, etc.). TRAVEL/ATTENDANCE: Applications Engineer will work in our Palatine, IL office. Hybrid Schedule of Monday/Friday Remote and Tuesday-Thursday in the office. Frequent travel is required to visit customers, attend trade shows and participate in internal meetings. The expected overnight CH1 travel in this position is 4-6 days per month but may fluctuate based on business needs. PHYSICAL REQUIREMENTS/HAZARDOUS WORKING CONDITIONS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential work functions.) OMI Industries manufactures odor eliminating solutions. Chemical exposure to raw materials including plant oils, fragrances, and other materials will occur. The employee will be expected to travel to customer sites including but not limited to asphalt plants, wastewater treatment facilities, and industrial refineries. The employee will be regularly required to sit; stand; walk; bend; climb; kneel; crouch; and reach using feet, legs, back, arms, hands; to talk and hear. The employee must be capable of wearing required Personal Protective Equipment such as hard hats, safety glasses, gloves, steel-toed boots, hearing protection, and respiratory protection (including face masks and respirators). While on customer sites, the employee must be able to ascend/descend ladders and stairs, access rooftops, confined spaces, and uneven terrain. The employee must be able to adhere to, evaluate, and act on safety protocols. They must have a tolerance for the state of sites (I.e., smell, odor, dirt). Must possess the ability to detect auditory and/or visual alarms. WORK ENVIRONMENT: Work may be outdoors in a variety of weather conditions and environments with potential exposure to moving mechanical parts, hazardous substances, and biological waste. PIf79a6-
