4 jobs found

Job Description Job Description Employment Type: Full-Time Hours: Monday-Friday 6:00 AM-2:30 PM 1st Shift Monday-Friday 2:00 PM-10:30 PM- 2nd Shift Sunday-Thursday 10:00 PM-6:30 AM 3rd Shift Why Work Here? "We offer a wide range of job profiles and we give our employees early responsibility and equip them with specialist skills." JOB TITLE: Setter GENERAL DESCRIPTION : Set up machines per specified requirements to assure quality standards and parameters of the manufacturing orders are met. Participate in continuous improvement and safety. Coilers/wire formers (CNC programming) for existing parts. Ensure all machines / operations are running smoothly, promptly and at highest quality standards. They are ensuring the efficient running of equipment and contribute to the production process. Set up machines per specified requirements to assure quality standards and parameters of the manufacturing order are met. JOB RESPONSIBILITIES (Include but are not limited to): • Set up wire coiling machine / change wire • Responsible for accuracy of all transactions within the department • Machine and support equipment preparation. Assure the machine is cleaned, properly lubricated and prepared before each set up. • Minimize downtime through tooling preparation and requisition of materials prior to machine availability for set up • Implement the control plan for the production process (i.e. load testing, dimentionals) • Ensure the equipment is serviced as required before the operation • Perform set ups of machines per specified instructions. Make necessary allowances for heat treating / stress relieve operation when applicable. • Basic spring calculation • Creation of set up card for new items. Review and revision of set up cards for revision of existing items • Perform Machine preventive maintenance • Maintain equipment to assure it is operated according to equipment specifications and safety standards. • Inspection and SPC control per QSYS /control plan instructions. Make adjustments when necessary. • Assure proper monitoring of the production to assure quality parameters are met. Make adjustments when necessary. • Assure machine is set up and monitored to maintain the proper run speed and scrap rate • CNC programing for existing parts • Thorough knowledge of assigned inspection equipment. Assure proper set up and use of machines. • Identification and traceability of product • Maintain proper containment and reaction activities (i.e., proper segregation by manufacturing order) • Keep work area clean, orderly and safe • Know the production process, safety and procedure of the BST Quality Manual • Follow established work instruction designated by the supervisor • Use safety equipment and eliminate unsafe conditions • Maintain integrity of tooling. Tooling must be maintained and stored per procedures. • Monitor tooling inventory. Replacement tooling must be ordered when it meets or dips below the minimum stock level as required • Set up and operate auxiliary equipment related to the production machine. • Direct activities of Operators and Packers to assure machines are running to specified standards (quality, speed & scrap) • Support Operators and Packers to assure they have the tools, equipment, and documentation needed to perform their duties • Attend production meetings and communicate needs to all employees in the department • Responsible for cleanliness and organization of the department • Identify and introduce 5S / process improvements as required KNOWLEDGE, SKILLS and ABILITIES: • High School Diploma or GED (preferred) or equivalent of 2 years' experience • Ability to comply with responsibilities in accordance with the organization's policies and applicable laws • Ability to lift up to 50 pounds • Knowledge and ability of proper Quality procedures in accordance with shipping • Knowledge and ability in proper inventory control and maintenance • Knowledge and ability to maintain proper safety in the area including maintenance of equipment • Read and understand manufacturing order with its specifications • Read, understand and implement the instructions on the production orders/routings • SPC Basics • Preventive machine maintenance • Interpretation of MO and control plans Company Description The BAUMANN Group has been a symbol of Swiss precision and quality for more than 130 years. We invite you to benefit from our experience as one of the world's leading manufacturers of springs and stampings. The group has eleven production sites around the globe, where more than 1,600 people design and produce technically sophisticated products for selected industries, including the automotive, electrical engineering and medical technology sectors. Learn more about BAUMANN visiting our homepage: At Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Company Description The BAUMANN Group has been a symbol of Swiss precision and quality for more than 130 years. We invite you to benefit from our experience as one of the world's leading manufacturers of springs and stampings. The group has eleven production sites around the globe, where more than 1,600 people design and produce technically sophisticated products for selected industries, including the automotive, electrical engineering and medical technology sectors. Learn more about BAUMANN visiting our homepage: At Baumann Group, we celebrate diversity and are committed to creating an inclusive environment for all employees. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job Description Job Description Title : CNC Machine Programmer Location : Henrico, VA 23231 Hire Type : Direct Hire Shift : Various Shifts available: 1st Shift: 7a till 3:30p 2nd Shift: 3:30p till 11:30p 3rd Shift: 11:00p till 7:00a Compensation : $30-$40 DOE Bonus/ Incentives/ Stock Options: Matching 401(k) Contributions, Tuition Reimbursement Benefits : Full range of benefits, life insurance, short-term and long-term disability, Vacation and Paid Sick Time Overview: We are seeking an experienced CNC Machine Programmer / Set-Up Technician to join a growing manufacturing team in Henrico, VA. This role is responsible for programming, setting up, adjusting, and operating CNC machinery used in the production of aluminum and steel components. The ideal candidate will have strong machining knowledge, experience creating and modifying CNC programs, and the ability to work with close-tolerance parts while maintaining high quality standards. Job Duties: Program, set up, and operate CNC machines to manufacture aluminum and steel components according to engineering specifications. Perform complex machining operations requiring close tolerances and high-quality surface finishes. Calculate and adjust machining parameters including speeds, feeds, coolant flow, depth of cut, and cutting angles. Create, modify, and maintain CNC programs to optimize machine performance and production efficiency. Select, install, align, and secure tooling, fixtures, attachments, and workpieces. Troubleshoot machining issues and make necessary program or setup adjustments. Verify part dimensions and quality using precision measuring instruments. Maintain accurate production records and job transactions. Follow all safety, quality, and manufacturing procedures. Collaborate with production supervisors and team members to support operational goals and continuous improvement initiatives. Qualifications: Associate degree in Manufacturing Technology, Machine Tool Technology, or a related field; or equivalent apprenticeship/trade school training. 3-5 years of CNC programming and machine setup experience in a manufacturing environment. Strong understanding of CNC machining principles and best practices. Ability to read and interpret blueprints, technical drawings, schematics, and work instructions. Experience working with aluminum and steel materials. Proficiency using precision measuring tools and inspection equipment. Strong mathematical and problem-solving skills. Ability to analyze technical information and make sound decisions independently. Experience with multi-axis CNC equipment. Knowledge of lean manufacturing principles and continuous improvement methodologies. Experience optimizing machining processes for efficiency and quality. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description Job Description Job Description JOB TITLE: CNC Programmer REPORTS TO: Toolroom Supervisor FLSA: Non-exempt JOB SUMMARY: Completes assigned engineering tasks as needed to build production equipment. Uses various machining techniques to produce a quality plastic part that meets the requirements of the customer. Provides tooling support to the engineering, production, quality and maintenance departments of Accumold. Optimize performance of the assigned CNC machining centers. ESSENTIAL DUTIES AND RESPONSIBILITIES: Build components for new tools, existing tools and molds through the use of machining centers and tool room equipment, using designs created by the engineering department. Read and interpret plans from paper drawings or computer files. Using toolmakers scope, measures, examines, diagnoses and trouble-shoots new and existing molds to make improvements or corrections. Work as a team with project leaders to ensure that projects are finished quickly and precisely. Clean and maintain production tools and molds. Other duties as required. REQUIRED KNOWLEDGE, SKILLS & ABILITIES: Education/Experience . High school education coursework or GED required. Two-year tool & die degree or four years experience in tooling or mold making preferred. Two years experience working with CNC machining centers. Computer Skills . Ability to operate personal computer. Knowledge of Windows based CAD programs such as Master cam, AutoCAD and Solid Works. Language Skills . Ability to read, comprehend, and utilize instructions and short correspondence with professionals. Ability to effectively present information in one-on-one and small group situations to other employees. Mathematical Skills . Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratios, percent and use trigonometry. Ability to read and understand complicated designs and drawings. Reasoning Ability . Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. An understanding of cause and effect as it relates to mold making. Use of experience to trouble shoot and problem solve. Other Skills and Abilities . Willingness to attend conferences, classes or training to enhance and update knowledge and skills. Occasional travel may be requested for company business. Overtime may be required to meet toolroom work demands. Supervisory Responsibilities . Ability to direct work task to others if you are assigned the lead role in a project. Physical Demands . While performing the duties of this job, the incumbent is required to stand and use hand to manipulate very small parts or tweezers. Sense of touch may be used to detect texture, burs and edges. Frequent movement throughout the facility is required. Normal or corrected to normal vision is required with good color vision, close vision, and ability to use microscope and adjust focus. May be required to move or transport up to 55 lbs. Work Environment . The duties of this job are executed in a climate-controlled environment with few temperature or humidity extremes. Noise levels will vary from very low to moderate depending on the location that the work is performed within the facility. The noise level in the work environment is usually moderate. Employee may have contact with machining residues such as steel chips, grinding dust, EDM smoke, cutting oils and coolants. Safety glasses are required. The description given is intended only to provide information about the general nature of the job and is not an all-inclusive list of the job duties, skills or abilities. Employment with Accumold is "at will", meaning that either the employee or the company may terminate employment at any time and for any or no reason.