JA Riggs Tractor Company

Job Description Job Description Description: Riggs Cat Power & Energy is hiring Dyno Technicians at every level, from Test Assistant to Dyno Lead / Test Engineer-Technician. You will test rebuilt and serviced engines before they return to service, validating horsepower, torque, and break-in against OEM spec and flagging units for rework. This is not an entry role: at least 2 years of commercial diesel or large-bore engine experience is required to start. The dyno is the final quality checkpoint after rebuild, working hand in hand with our Engine Rebuild and Transmission teams. Client First and Integrity lead here: the test sheet is what the client trusts, and senior techs run client witness tests face to face. Every level lives the Riggs Way: Urgent. Selfless. Excellent. Levels and responsibilities Level 1: Test Assistant Typical experience: Internal Level 2 rebuild tech, or outside hire with 2+ years commercial diesel or large-bore experience (2-6 years of relevant experience expected) Engine mounting and hookup Sensor installation Pre-start checklists Gauge monitoring Supervised data logging Moves up when: Runs a standard test start to finish under observation with no safety or procedure misses Level 2: Technician II Typical experience: 3-5 years of diesel or gas engine work, including dyno or test cell time Independent setup and runs Break-in HP/torque curve capture Basic exhaust/emissions measurement Test reports Moves up when: Isolates test failures to setup vs. engine cause and completes 7-Step Diagnostic Process training Level 3: Senior Typical experience: 5-10 years; strong diagnostics and deep test-cell experience in diesel and gas Diagnoses below-spec performance Gas engine targeting Return-to-service sign-off on individual engines Sensor and load cell calibration checks Client witness tests, run face to face with clear results Rework feedback to rebuild techs Moves up when: Ready to own test standards and the dyno program (Level 4) Level 4: Lead / Test Engineer-Technician Typical experience: 10+ years of engine test and diagnostic work The shop's authority on test standards and performance data. Here's what changes from Senior: Scope: Decides what returns to service and what goes back for rework across the shop Standards: Sets test procedures and acceptance criteria per engine family, including new families the shop takes on, instead of working to written procedures Equipment: Owns dyno calibration and maintenance, plus instrumentation and calibration management Client witness tests: Sets witness test procedures and handles escalated tests, including when an engine misses spec in front of the client Rebuild lines: Tracks failure trends, feeds them back to the rebuild lines, and keeps the lines working with the test team People: Trains dyno staff Client role: Presents results clearly to non-technical clients Level 4 is the top of the ladder. Requirements: What you bring All levels: Engine mechanical fundamentals and test-cell safety around rotating equipment, heat, exhaust, and noise Comfort working around running engines for a full shift Disciplined use of written test procedures, guarding, and e-stops Cat ET and SIS 2.0, or a comparable service information system (e.g., Cummins QuickServe/INSITE, Detroit DiagnosticLink, Jaltest) By level: Level 2+: Data acquisition software and sensor and load cell calibration checks Level 3: 7-Step Diagnostic Process, GERP for gas engine targets, AFA I & II Level 4: Same training as Senior How you work: Verifies instrumentation before trusting data Raises rework issues with evidence and keeps working relationships intact Will not sign off marginal results under schedule pressure IMPORTANT INFORMATION Must be able to pass work related pre-employment physical demands. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Will be required to drive for extended periods of time. The job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Non-Exempt; Hourly Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)