Butler Aerospace and Defense

CMM Programmer Location: Orlando, FL Job ID: Pay Range: $42-51/hr W2 Duration: 12 months Security Clearance: Ability to Obtain Responsibilities include, but are not limited to: Develops and reviews quality standards, methods, work instructions and procedures for the inspection of manufactured and procured parts. Develops CMM process including designing fixtures, determining probes, and programming the machines. Develops and implements new inspection processes and automation methods. Utilizes lean initiatives to reduce waste and maintain continuous improvement. Supports the senior CMM programmers to develop ultra-precision processes. Required Experience Candidates must have at least 5 years of experience with all of the below: This position requires proficiency in GD&T, experience generating inspection processes, programming CMMs, and determining part acceptance. Ability to interpret drawings and specifications for development of quality standards, methods, work instructions and procedures for inspection of manufactured products (machined components and assemblies). Knowledge of GD&T and its application in CMM programming Completion of Zeiss Basic course required. Would also like candidate to have Zeiss Advanced and Curve/Free Form courses. Knowledge of CMM programming software (e.g. Zeiss Calypso) Proficient skill level with Microsoft Office applications Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Test Engineer Location: Monroe, WA Job ID: Pay Range: $48-57 AN HOUR 6+ Month Contract This position is responsible for supporting all aspects of testing for hydraulic and electro-mechanical systems components. JOB RESPONSIBILITIES: Setting up & running automated tests for electro-mechanical & hydraulic actuation components Learning how to troubleshoot all aspects of our test systems These systems include multi-axis hydraulic loading systems, thermal control systems, motor controls and loading systems, and data acquisition systems. Maintain software and help maintain calibration on all test equipment Develop software for test automation and data acquisition Support outside lab testing such as vibration, altitude, humidity, icing, etc. Design and assemble data acquisition and control systems EDUCATION/ EXPERIENCE: Bachelor's Degree in: Mechanical, Electrical, Aerospace Engineering or other related field Minimum of 5 years engineering experience or relative aviation technical experience. QUALIFICATIONS: Familiarity preferred with software packages such as LabVIEW, MatLab Simulink, MathCad Preferred knowledge or experience with any of the following: o Hydraulic Actuators - Internal Locking and Non-Locking o Hydraulic Valves, Reservoirs, Accumulators, Pumps o Hydraulic Power Packs o Linear and Rotary Electro-mechanical actuators o Ball-screws, Roller Screws, ACME Screws o Gears, Splines and Planetary Gear Sets o Electronic Enclosures Preferred experience with the following: o Regulatory requirements for qualifying and certifying components o Vibration modes and testing associated with similar components and systems o Thermal considerations associated with similar components and systems o Requirements for tests such as: Fatigue; Endurance; Temperature; Limit and Ultimate Loads; Column Buckling; Operating pressures, Proof pressures, and/or Burst Pressures; Impulse Testing; Power and Load o Test methods used to qualify these types of products o Motors and controls Demonstrated technical and organizational leadership Demonstrated ability to identify problems and provide solutions Demonstrated ability to work as a team player both internally and externally Strong presentation skills Excellent analytical and math skills Excellent communication skills, both written and verbal Understanding and experience utilizing Microsoft Office suite programs (Word, Excel, Access) High comfort level with learning and understanding new software programs Ability to manage time and work output while completing multiple projects/work assignments Skills Demonstrated technical and organizational leadership Demonstrated ability to identify problems and provide solutions Demonstrated ability to work as a team player both internally and externally Strong presentation skills Excellent analytical and math skills Excellent communication skills, both written and verbal Understanding and experience utilizing Microsoft Office suite programs (Word, Excel, Access) High comfort level with learning and understanding new software programs Ability to manage time and work output while completing multiple projects/work assignments Education Bachelor's Degree in: Mechanical, Electrical, Aerospace Engineering or other related field Preferred Qualifications Familiarity preferred with software packages such as LabVIEW, MatLab Simulink, MathCad Preferred knowledge or experience with any of the following: Hydraulic Actuators - Internal Locking and Non-Locking, Hydraulic Valves, Reservoirs, Accumulators, Pumps, Hydraulic Power Packs, Linear and Rotary Electro-mechanical actuators, Ball-screws, Roller Screws, ACME Screws, Gears, Splines and Planetary Gear Sets, Electronic Enclosures Preferred experience with the following: Regulatory requirements for qualifying and certifying components; Vibration modes and testing associated with similar components and systems; Thermal considerations associated with similar components and systems; Requirements for tests such as: Fatigue; Endurance; Temperature; Limit and Ultimate Loads; Column Buckling; Operating pressures, Proof pressures, and/or Burst Pressures; Impulse Testing; Power and Load; Test methods used to qualify these types of products; Motors and controls US Person or eligible to receive an Export License Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Test Engineer Location: Middletown, RI Job ID: Duration: 9-12+ months contract Pay Range: $67-79 - W2 hourly Active Secret Clearance required to start. Job Description Main functions of this role: We are seeking Test Engineer to join our Physical Sciences & Systems business unit located a stone's throw from seaside Newport, Rhode Island. Responsibilities will include but are not limited to execution of test plans for Linux & VxWorks software development efforts, hardware & software integration efforts, and test planning and development. The ideal candidate enjoys in a multi-disciplinary role and is comfortable adapting to and identifying new technologies as needed. Primary Responsibilities: Develop test plans, test procedures, and test tools for multiple programs Perform testing of both HW and SW systems, isolate failures, and propose solutions Interface with DoD clients executing formal sell-off test events and integration test periods Work closely with development teams when bugs are identified to track and resolve issues Requirements tracking and verification Qualifications You Must Have: An active DoD secret clearance BS in Computer Engineering, Computer Science, or relevant discipline and 5 years of experience or MS grad with degree and 3 years of experience. Test execution experience in software environments, and documentation of test results Experience with test tracking software tools. Position may require some amount of overnight travel. Active DoD Secret clearance or higher. Qualifications We Prefer: Experience and knowledge of software development in C Experience working with embedded systems Experience with Atlassian toolset (i.e. Jira and Confluence) Experience in QA or configuration management 5-8Years of Experience Required Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) How will the contractor's success be measured? Completes integration and sell-off testing events with knowledge sufficient for success Develops complete and successful test plans and test procedures Develops tools usable by self and others to support smoke testing, integration testing, and harnessing of SW and HW components. Completes support of HW/SW system acceptance testing and reporting with deliverables accepted by customer. Culture Collaborative on-site team environment Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Systems Integration/Test Engineer (Mech & Electrical Testing) Location: Orlando, FL (32819) Job ID: Pay Range: $42-48 Pay based on experience 1st Shift - Mon - Thurs 500am - 330pm 4-10hr days, some overtime on FRIs or SATs Required: BS degree + 0-2yrs experience w/ Mech & Electrical Testing & Technical Report Writing experience Open to US Citizens - must have the ability to obtain secret clearance. Active clearance is preferred. Active secret not required to start. THE COMPANY - Work with one of the Largest American Owned Aerospace & Defense Companies. Responsibilities Include: -Performing shock and vibration qualification testing on system hardware. -Maintaining detailed logs of test events. -Writing formal technical reports for requirements verification at the completion of qualification tests clearly showing compliance to test objectives and requirements. Required Experience: -Candidates must have at least 1 years of Technical Report Writing experience. -Candidates must have at least 1 year of Mechanical Testing (such as shock and vibration) experience. -Candidates must have at least 1 year of Electrical Testing (primarily troubleshooting) experience. -Disciplined ability to follow test procedures and attention to detail are critical for this role Desired Skills & Experience: -Understanding how to utilize and prepare general test equipment including but not limited to digital multimeters, multi channel scopes, power supplies, Data Acquisition Units (DAQ) etc. -Familiarity with environmental qualification testing at component level. -Ability to understand analog signals, review real time measurement data and make real time decisions. -Ability to read and understand electrical schematics and perform electrical troubleshooting. -Ability to collect and catalog detailed test data and concisely present data to internal stake holders along with recommendations. -Ability to communicate effectively and concisely with Sr. Management and Leadership. -Ability to adequately prepare and present data reviews to a mixed audience and field questions with support. -Experience communicating and working with interdisciplinary teams. Ideal candidate will be a self starter with a can do proactive attitude. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Systems Integration/Test Engineer Location: Chelmsford, MA Job ID: Pay Range: $70-79 ph (W2) Duration: 6 - 12 mos Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems. Coordinates subsystem and/or system testing activities with programs and other organizations. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems. Qualifications: Bachelor's degree from an accredited college in a related discipline (Electrical Engineering, Computer Engineering, Computer Science or related field of study or related professional level career experience) 5+ years experience using Microsoft Office products to generate status reports, project plans, and work instructions. 5+ years experience writing, editing and supporting existing software code base using LabVIEW 3+ years experience writing, editing and supporting existing software code base using Test Stand software. 3+ years experience in analyzing and resolving problems. Experience in managing and prioritizing your own workload that may consist of several tasks at once. Excellent verbal and written communication skills. Experience in effectively working on teams. Ability to work with minimal detailed direction to deliver desired results. Experience in working with and leading teams towards milestone completion Desired (nice to have) Qualifications: A minimum of 9 years of professional level career experience is preferred. Proven success in implementing appropriate methods to measure electrical parameters typically required for components and subassemblies. 5+ years subject matter expert in Radio Frequency or Microwave systems and subsystems. 3+ years success in developing multiple complex test programs with Test Stand development environments. Proven track record of researching and specifying components for test equipment design. Proven ability in troubleshooting measurement issues and isolating problems down to the test instrument, fixturing, software level or unit under test. Proficiency generating assembly and block diagram sketches, parts lists and other types of engineering documentation. Proficiency in Corrective/Preventative action process and implementation.-Solid background in deriving test requirements from design or system level requirements. Ability to identify and author required documentation to correct drawing to actual hardware discrepancies. Proven collaborator with multidiscipline teams. Effective relationship builder across multiple organizations and disciplines. Experience preparing charts and giving presentations outlining technical issues, solutions or trade studies. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Senior Systems Engineer (ME) Location: Florence, SC Job ID: Pay Range: $57- month contract TECHNICAL SKILLS Must Have: 3D Computer Aided Design (CAD) Change Management Systems Engineering Change Management (ECM) Engineering Drawings Experience using Microsoft Excel or other similar software. Failure Analysis Layout Drawings Performance Analytics Requirements Engineering Root Cause Analysis (RCA) Root Cause Failure Analysis (RCFA) Nice To Have: Communication Techniques MATLAB Simulink Stakeholder Collaboration Stakeholder Communications Stakeholder Engagement JOB DESCRIPTION This position is for a Senior mechanical engineer who provides system engineering support. The position plays a key support role to ensure that these programs deliver a complete elevator system that meets customer, functional, code, and safety requirements. Position Responsibilities Primary responsibility is to evaluate and report the impact of changes, whether from a part or sub-system, to the elevator system envelopes. Engineer may need to develop dimensional studies (including 3D modeling), performance studies, cost benefit analysis, prototyping, test plans, or code requirement studies of all affected sub-system(s). System engineer should also be able to collect elevator requirements from all the stakeholders, and then de-compose these into requirements for the specific sub-systems. This position will interface with multiple value streams such as supply chain, field operations, Marketing, factory support, and others to ensure that requirements are met. The candidate should have a strong mechanical engineering background with complex system level integration experience. Candidate will participate in product support activities where prior experience with root cause analysis, priority assessment, DFMEA, DFM, and other engineering tools is desired. Position will also require implementation of Engineering Change notices, so a strong background/experience of engineering implementation process is desired. Experience/Skills Sound mechanical engineering background (mechanical and system modeling and design, component modeling and design) • Development of Performance Envelopes (Duty Tables). • Generation of 2D layouts and studies (e.g. AutoCAD). • Strong 3D modeling skills and ability to analyze interfaces and interferences. • Strong communications and leadership skills. • Working knowledge of Microsoft Office software. • Engineering change implementation process experience. • Experience with Root cause analysis, DFMEA, and other investigative ENG tools. • Requirements Management with team and stakeholders. • Design documentation with Mathcad desirable. • Previous Elevator Experience strongly preferred. Education • BS Degree in mechanical engineering degree with 6+ years' experience • MS degree with 4+ years' experience Requirements - Green card or Citizenship required - Majority of work will be in office. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Industrial Systems Engineer Location: Ocala, FL Job ID: Pay Range: $45-53 - W2 hourly Duration: 12 months contract Job Description: Mechatronics Engineer / OT Infrastructure Engineer / SCADA Systems Engineer / Manufacturing Systems Engineer Summary We are seeking an Industrial Systems Engineer to own and stabilize the data, server, and communication infrastructure that supports our automated manufacturing lines. This role bridges manufacturing equipment, industrial networking, databases, and SCADA platforms. You will be the technical owner of plant systems that must run reliably in a production environment. This is not a traditional IT helpdesk role and not a pure controls role. It is a hybrid operational technology (OT) position focused on uptime, troubleshooting, and scalable architecture. Responsibilities Maintain and troubleshoot manufacturing databases used by production equipment Ability to troubleshoot server infrastructure supporting automation systems (Windows/Linux) Support and administer SCADA/historian platforms (Ignition or equivalent) Diagnose and resolve production outages related to data systems Monitor system performance, memory, storage, and service health Manage backups, redundancy, and disaster recovery Support industrial Ethernet communications between machines Standardize and replicate automation infrastructure across production lines Document architecture and recovery procedures Collaborate with controls engineers and IT/network teams Identify systemic risks and design improvements to prevent repeat failures Participate in on-call support for critical production systems What Success Looks Like Production systems run reliably with fewer unplanned outages Database and server failures are diagnosed quickly Automation infrastructure is standardized across lines Documentation exists for recovery and scaling Preventive improvements reduce firefighting over time Required Specific Experience: 5+ years experience in manufacturing, automation, or industrial systems 2+ years supporting SQL databases in a production environment 1+ years Windows Server or Linux administration experience 3+ years Industrial networking fundamentals (Ethernet/IP, OPC-UA, or similar) 3+ years troubleshooting live production outages Ignition certification or SCADA platform experience Experience in electronics manufacturing environment SQL Server DBA experience VMware or virtualization experience Scripting experience (PowerShell or Python) Experience with historian or MES systems Industrial cybersecurity familiarity Cisco CCNA or equivalent networking knowledge CompTIA Server+ or Linux+ certification Experience deploying repeatable automation architectures Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law. Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Configuration Analyst Location: Orlando, FL Job ID: Pay Range: $50-59 an hour DOD SECRET CLEARANCE - REQUIRED 12 MONTH CONTRACT! Analyzes proposed changes of product design to determine effect on overall product and system. Coordinates modification records for management control. Establishes change orders and prepares for change authorization and documentation by company and subcontractor. Prepares reports of change effect on overall product. Reviews and analyzes released engineering change data and coordinates changes with engineering, quality, support, manufacturing, and engineering data control activities. Ensures that customer requirements are implemented and reviews change accounting activity to ensure compliance with configuration management policies. Job Description : You will be the Data Manager for our team. Our team is responsible for managing and coordinating contract data requirements, ensuring compliance with contractual obligations, and maintaining accurate program metrics. What You Will Be Doing As the Data Manager, you will be responsible for analyzing and resolving conflicts related to contract data requirements, as well as maintaining and revising program directives to ensure coordinated establishment and compliance. Your responsibilities will include: Analyzing Contract Data Requirements List (CDRL)/Subcontractor Data Requirements List (SDRL) for contract and task compatibility Maintaining and revising Program Directives (PD) to ensure compliance with data requirements Loading and updating CDRL/SDRL tracking tools and websites Coordinating with Integrated Product Teams (IPT) and data owners to ensure timely submittals Reviewing and releasing controlled documents in the Product Lifecycle Management repository Required Experience: - 4 Year college degree or equivalent experience. - 3+ years of related experience with markings, formatting and handling of documentation. - 3+ years of related experience with reading engineering drawings and documentation. - 3+ years of related experience with processing CDRLs/SDRLs in accordance with the Contract SOW, 1423s, and DD250s, and in accordance with the applicable Industry Standards. - 3+ years of related experience ensuring that customer requirements are implemented and reviews change accounting activity to ensure compliance with configuration management policies. - 3+ years of related experience with Microsoft Office tools (Word, Excel, Access) Desired skills : - Individual must be a self-starter capable of effectively managing multiple tasks. - Strong organizational skills, detail oriented and capable of creating status and tracking reports for management and customers. - Experience with Product Data Management tools. - Excellent written and oral communication skills. - Demonstrated ability of solving complex problems which require ingenuity and innovation. - Programming experience with Access databases. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

System Integration and Test Engineer Location: Orlando, FL Job ID: Pay Range: $60- month contract Active Secret Clearance required to start. Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems. Coordinates subsystem and/or system testing activities with programs and other organizations. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems. Sensor development programs are seeking a System Integration and Test Generalist for an Electro-Optical development/production program. Specific tasks include: -Supporting overall sensor System Integration, Qualification and Verification -Developing and executing Subsystem/System-level tests -Support preparation of test equipment and facilities required for test events, including SW development -Perform Environmental Testing (ESS, EMI, Thermal, etc) and Acceptance Testing (ATP, FTP) -Perform environmental qualification and EMI testing at the subsystem and system level as required -Support maintenance of ICDs in concert with other functional groups -Support test readiness preparation and test readiness reviews, -Support ground and flight test events as required. Additional responsibilities include coordinating test events with Reliability, Software, Electrical, and Mechanical functional organizations. General job description: Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems. Coordinates subsystem and/or system testing activities with programs and other organizations. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems. Safety Shoes are required for lab/field activities. REQUIRED EXPERIENCE/SKILLS: 2-4 Years experience with EO Sensor Development/Testing 2-4 Years experience of Electronic Testing 2-4 Years experience of Mechanical Testing DESIRED EXPERIENCE/SKILLS: Demonstrated missile/sensor/platform integration experience Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at

Test Engineer Location: Liverpool, NY Job ID: Pay Range: $40-44 depending on experience/clearance status 12 month contract THE WORK Provide Test and Technical support to ensure that customers receive high-quality, functional products for RF Communications and Radar products. Provide troubleshooting and process guidance to represented workforce (Union) in both proactive and reactive situations. Develops and Updates test procedures based on test requirements, solves technical issues with the Special Test Equipment (STE), and Unit Under Test (UUT) (tactical/customer equipment). Generates test-ready documentation for use on production floor. Drives Continuous improvement into the test methods and products under test. Investigates issues to determine root cause/corrective actions to solve issues with test methods and unit under test. Trains test technicians. Systematic troubleshooting and problem solving skills to resolve issue effectively and efficiently. Please Note: This position requires a government security clearance; you must be a US Citizen for consideration. WHO WE ARE Our customers are world-wide and so is our reputation for creating innovative solutions with the latest technologies. Our products keep our customers safe and bring them home to their families at night. We provide the resources, inspiration, and focus - if you have the resourcefulness and perseverance to work hard, then we want to create a better tomorrow with you. Required Skills -Minimum of an Bachelor's Degree from an accredited college in a related discipline. -Minimum 2 years experience with RF Communications, RADAR, or SONAR required. Equivalent military/commercial experience/combined education considered. This position requires a government security clearance; you must be a US Citizen for consideration. Desired Skills Electrical Test Measurement experience Electrical Troubleshooting experience Team Player (able to work in a diverse work force) Digital & Analog Electronic Knowledge Technical Writing for Procedures Understand and Follow Configuration Management (CM) practices Networking basics Strong documentation skills to create procedures and support documentation for test systems. Fiber Optics Component level troubleshooting experience Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices . Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at