WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Primary Objective of Position: The Project Manager has the overall responsibility for the successful planning and execution of each project. They are the main customer contact throughout the project from the incoming order to post-delivery support and will be required to develop and maintain good working relationships both with the customer and between the various departments. This will include the planning and management of the scope of work, schedule, open items, documentation, and budget. Major Areas of Accountability: Provide direction and control for multi-disciplinary project teams. This includes all phases of the project from system design, integration, buy off/acceptance and factory installation Foster strong customer relationships through good communication throughout the project lifecycle. Update the customer as required on project progress, scope, open issues, schedule, and technical issues Prepare and maintain the project budget based on the quotation, any Engineering Change Orders (ECOs) and all customer Purchase Orders Prepare and maintain the project schedule - for both internal and customer use, including coordination of all CCI customer deliverables. Ensure that all project deliverables are complete and delivered as per schedule Assist department managers in manpower planning for their project(s) Monitor and maintain the financial success of the project by tracking all material and labor costs throughout the project lifecycle and adjusting as required Continually review scope of work for any possible risk items; develop, initiate, and monitor any risk mitigation plans Continuously monitor all project resources to ensure the project remains on target from a cost, scope, schedule, and technical perspective Monitor the procurement process to ensure that materials are delivered as per current project schedule Schedule and manage all design reviews to ensure that the work is executed in a timely fashion and that the resultant designs meet scope, cost, and schedule requirements Provide regular job status reviews to management Support the sales process for assigned accounts by interfacing with customers to clarify the RFQ and the resulting proposal in coordination with Outside Sales Provide support to the Applications Engineering group in developing proposals for assigned accounts, including defining the scope of effort and initial design concept. Education and Experience: Bachelor's Degree in an Engineering discipline and or equivalent experience A minimum of 2 years of relevant Project experience preferably in a test and development environment. Knowledge, Skills, and Abilities Required: Basic technical knowledge including broad understanding of electrical, software and mechanical engineering concepts Basic understanding of commercial aspects of contract engineering Proficient in influencing, negotiating and relationship building skills Good communication skills; able to articulate the benefits and preferences of each product Prioritization/organization of work and multi-tasking skills are critical to this position Capacity to deal with a high workload and under pressure of meeting deadlines Excellent listening, negotiation, and presentation skills Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature, and a sense of urgency Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 30 lbs. occasionally Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $75,000 - $125,000. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI10fbcf24e6-
01/01/2026
Full time
WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Primary Objective of Position: The Project Manager has the overall responsibility for the successful planning and execution of each project. They are the main customer contact throughout the project from the incoming order to post-delivery support and will be required to develop and maintain good working relationships both with the customer and between the various departments. This will include the planning and management of the scope of work, schedule, open items, documentation, and budget. Major Areas of Accountability: Provide direction and control for multi-disciplinary project teams. This includes all phases of the project from system design, integration, buy off/acceptance and factory installation Foster strong customer relationships through good communication throughout the project lifecycle. Update the customer as required on project progress, scope, open issues, schedule, and technical issues Prepare and maintain the project budget based on the quotation, any Engineering Change Orders (ECOs) and all customer Purchase Orders Prepare and maintain the project schedule - for both internal and customer use, including coordination of all CCI customer deliverables. Ensure that all project deliverables are complete and delivered as per schedule Assist department managers in manpower planning for their project(s) Monitor and maintain the financial success of the project by tracking all material and labor costs throughout the project lifecycle and adjusting as required Continually review scope of work for any possible risk items; develop, initiate, and monitor any risk mitigation plans Continuously monitor all project resources to ensure the project remains on target from a cost, scope, schedule, and technical perspective Monitor the procurement process to ensure that materials are delivered as per current project schedule Schedule and manage all design reviews to ensure that the work is executed in a timely fashion and that the resultant designs meet scope, cost, and schedule requirements Provide regular job status reviews to management Support the sales process for assigned accounts by interfacing with customers to clarify the RFQ and the resulting proposal in coordination with Outside Sales Provide support to the Applications Engineering group in developing proposals for assigned accounts, including defining the scope of effort and initial design concept. Education and Experience: Bachelor's Degree in an Engineering discipline and or equivalent experience A minimum of 2 years of relevant Project experience preferably in a test and development environment. Knowledge, Skills, and Abilities Required: Basic technical knowledge including broad understanding of electrical, software and mechanical engineering concepts Basic understanding of commercial aspects of contract engineering Proficient in influencing, negotiating and relationship building skills Good communication skills; able to articulate the benefits and preferences of each product Prioritization/organization of work and multi-tasking skills are critical to this position Capacity to deal with a high workload and under pressure of meeting deadlines Excellent listening, negotiation, and presentation skills Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature, and a sense of urgency Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 30 lbs. occasionally Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $75,000 - $125,000. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI10fbcf24e6-
About the job Who we are: Circuit Check is a global leader in automated test systems for complex electronics. Our Technology and Solutions Group (TSG) is driving innovation across hardware, software, and data to define the next generation of intelligent, scalable test platforms. We're seeking a Product Manager, Functional Test who will own the definition and evolution of Circuit Check's functional test platform - bringing together instrumentation, control software, and system integration into a cohesive, scalable offering for our customers. This role requires both technical depth and commercial insight: someone who understands ATE design, customer production challenges, and how to convert engineering capability into standardized, repeatable test solutions. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The Product Manager, Functional Test will serve as the architect and champion of Circuit Check's custom test system development platform, ensuring that our tools, architectures, and processes deliver consistent performance and reliability across industries. You will work closely with design engineers, system integrators, and customers to define our standard toolset and hardware platform, balancing innovation with manufacturability and supportability. This position is ideal for someone who thrives at the intersection of engineering, product strategy, and customer engagement - with approximately 25% travel to customer sites vendors, and Circuit Check facilities. Key Responsibilities Platform Ownership: Define and maintain the roadmap for Circuit Check's functional test system platform, including instrumentation, hardware interfaces, and software architecture Customer Engagement: Collaborate directly with customers to understand testing needs, production environments, and industry trends, translating insights into platform improvements System Integration: Lead cross-functional efforts to align mechanical, electrical, and software teams around a unified architecture for test solutions Toolset Development: Standardize and continuously improve Circuit Check's toolset for ATE system development, from hardware frameworks to software integration and documentation Technology Evaluation: Assess and integrate technologies from National Instruments, Rohde & Schwarz, Keysight, and Tektronix, as well as test executives (e.g., LabVIEW/TestStand) and emerging automation tools Quality & Scalability: Ensure that test platforms meet the highest standards for reliability, maintainability, and calibration traceability Training & Evangelism: Act as an internal and external advocate for functional test excellence - enabling sales, training engineers, and supporting customers. Required Qualifications Bachelor's degree in electrical engineering, computer engineering, or related technical field Minimum 5 years of experience in functional test or ATE system design, integration, or product management Deep familiarity with instrumentation from National Instruments, Rohde & Schwartz, Keysight, and Tektronix Demonstrated experience with LabVIEW, TestStand or other Test Executive environments Proven ability to synthesize information from engineering, customer feedback, and market trends into coherent product direction Excellent communication skills and the ability to work cross-functionally with design, manufacturing, and commercial teams Willingness to travel approximately 25% for customer collaboration and platform deployment. Preferred Attributes Experience building or managing modular test platforms for high-mix or high-reliability electronics Understanding of calibration, traceability, and compliance standards (ISO, IPC, MIL-STD, etc.) Demonstrated ability to mentor teams on test strategy, fixture design, or measurement best practices Strong customer orientation and ability to translate complex engineering concepts into business value Strong systems thinking and ability to bridge business needs with technical design Clear communicator who thrives in a cross-functional engineering culture. Pay and Benefits CCI is committed to offering competitive pay and benefits, including, but not limited to: Flexible work hours Paid Time Off (PTO) and Paid Holidays Medical, Dental, and Vision Insurance Plans HSA and FSA Life Insurance 401(k) with match Tuition Reimbursement Pet Insurance Identity Theft Insurance Medical Bridge/Critical Care/Cancer/Accident Insurance This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current pay range is $120,000 - $200,000. Listed range represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. This range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PIc57a3227f59d-5332
01/01/2026
Full time
About the job Who we are: Circuit Check is a global leader in automated test systems for complex electronics. Our Technology and Solutions Group (TSG) is driving innovation across hardware, software, and data to define the next generation of intelligent, scalable test platforms. We're seeking a Product Manager, Functional Test who will own the definition and evolution of Circuit Check's functional test platform - bringing together instrumentation, control software, and system integration into a cohesive, scalable offering for our customers. This role requires both technical depth and commercial insight: someone who understands ATE design, customer production challenges, and how to convert engineering capability into standardized, repeatable test solutions. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary The Product Manager, Functional Test will serve as the architect and champion of Circuit Check's custom test system development platform, ensuring that our tools, architectures, and processes deliver consistent performance and reliability across industries. You will work closely with design engineers, system integrators, and customers to define our standard toolset and hardware platform, balancing innovation with manufacturability and supportability. This position is ideal for someone who thrives at the intersection of engineering, product strategy, and customer engagement - with approximately 25% travel to customer sites vendors, and Circuit Check facilities. Key Responsibilities Platform Ownership: Define and maintain the roadmap for Circuit Check's functional test system platform, including instrumentation, hardware interfaces, and software architecture Customer Engagement: Collaborate directly with customers to understand testing needs, production environments, and industry trends, translating insights into platform improvements System Integration: Lead cross-functional efforts to align mechanical, electrical, and software teams around a unified architecture for test solutions Toolset Development: Standardize and continuously improve Circuit Check's toolset for ATE system development, from hardware frameworks to software integration and documentation Technology Evaluation: Assess and integrate technologies from National Instruments, Rohde & Schwarz, Keysight, and Tektronix, as well as test executives (e.g., LabVIEW/TestStand) and emerging automation tools Quality & Scalability: Ensure that test platforms meet the highest standards for reliability, maintainability, and calibration traceability Training & Evangelism: Act as an internal and external advocate for functional test excellence - enabling sales, training engineers, and supporting customers. Required Qualifications Bachelor's degree in electrical engineering, computer engineering, or related technical field Minimum 5 years of experience in functional test or ATE system design, integration, or product management Deep familiarity with instrumentation from National Instruments, Rohde & Schwartz, Keysight, and Tektronix Demonstrated experience with LabVIEW, TestStand or other Test Executive environments Proven ability to synthesize information from engineering, customer feedback, and market trends into coherent product direction Excellent communication skills and the ability to work cross-functionally with design, manufacturing, and commercial teams Willingness to travel approximately 25% for customer collaboration and platform deployment. Preferred Attributes Experience building or managing modular test platforms for high-mix or high-reliability electronics Understanding of calibration, traceability, and compliance standards (ISO, IPC, MIL-STD, etc.) Demonstrated ability to mentor teams on test strategy, fixture design, or measurement best practices Strong customer orientation and ability to translate complex engineering concepts into business value Strong systems thinking and ability to bridge business needs with technical design Clear communicator who thrives in a cross-functional engineering culture. Pay and Benefits CCI is committed to offering competitive pay and benefits, including, but not limited to: Flexible work hours Paid Time Off (PTO) and Paid Holidays Medical, Dental, and Vision Insurance Plans HSA and FSA Life Insurance 401(k) with match Tuition Reimbursement Pet Insurance Identity Theft Insurance Medical Bridge/Critical Care/Cancer/Accident Insurance This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. For this role, our current pay range is $120,000 - $200,000. Listed range represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. This range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PIc57a3227f59d-5332
WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking an Applications Engineer to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our custom test solutions. Reporting to the AE Manager, the ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Primary Objective of Position: Provide technical sales and application proposals (includes quoting, presentation, high level system design, technical ability to select solutions, proposal writing) to customers, management, and engineering staff in support of custom functional test system sales. Major Areas of Accountability: Works with engineers, clients and suppliers to interpret product specifications Develops detailed design configurations, detailed costing, and quotations for engineered product and engineered product sales. Participate in pricing strategy with Sales/Management to create a technical bidding proposal Makes occasional on-site visits to clients to gain insight, gather technical data, and provide guidance in the application of complex system proposals Collaborate with Management to ensure project margin goals are obtained Transfers project scope details to the project team upon award of business Effectively documents all contact with each customer to keep appropriate personnel apprised of current status Uses existing approved proposal format to modify for ROM, budgetary and build to print opportunities Provides proposal presentation support to Management/Sales May generate CAD concepts for the proposals when needed Maintain a technical understanding of CCI products/services and an awareness of product developments by other manufacturers Interface and maintain a positive business relationship with customers, Sales and all CCI personnel May be required to regularly report on the status of all customer support, quotation support, and application sales support projects May assist the Project Manager as needed with internal technical coordination. Education and Experience: Bachelor's Degree in Electrical or Mechanical Engineering or equivalent experience in an electronics manufacturing or engineering services firm 3+ years of related engineering work experience Experience applying automated functional test development products is necessary. Knowledge, Skills, and Abilities Required: Electrical and Mechanical technical competency to effectively provide sales and application support Effective verbal and written communication skills with all stakeholders, project team members, management, clients, etc. Ability to present proposals Solid analytical skills; able to resolve very complex technical problems with innovative solutions Capacity to deal with a high workload and deadline pressure Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature and a sense of urgency Ability to occasionally travel to client locations for meetings (less than 5%) Ability to work extended hours as necessary to meet deadlines Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype) Working with ERP (IFS). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, crouch, and twist as required Majority of time is spent using a computer for completing work Ability to lift and carry up to 20 lbs. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $85,000 - $105,000 per year. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI2af-9002
01/01/2026
Full time
WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking an Applications Engineer to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our custom test solutions. Reporting to the AE Manager, the ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Primary Objective of Position: Provide technical sales and application proposals (includes quoting, presentation, high level system design, technical ability to select solutions, proposal writing) to customers, management, and engineering staff in support of custom functional test system sales. Major Areas of Accountability: Works with engineers, clients and suppliers to interpret product specifications Develops detailed design configurations, detailed costing, and quotations for engineered product and engineered product sales. Participate in pricing strategy with Sales/Management to create a technical bidding proposal Makes occasional on-site visits to clients to gain insight, gather technical data, and provide guidance in the application of complex system proposals Collaborate with Management to ensure project margin goals are obtained Transfers project scope details to the project team upon award of business Effectively documents all contact with each customer to keep appropriate personnel apprised of current status Uses existing approved proposal format to modify for ROM, budgetary and build to print opportunities Provides proposal presentation support to Management/Sales May generate CAD concepts for the proposals when needed Maintain a technical understanding of CCI products/services and an awareness of product developments by other manufacturers Interface and maintain a positive business relationship with customers, Sales and all CCI personnel May be required to regularly report on the status of all customer support, quotation support, and application sales support projects May assist the Project Manager as needed with internal technical coordination. Education and Experience: Bachelor's Degree in Electrical or Mechanical Engineering or equivalent experience in an electronics manufacturing or engineering services firm 3+ years of related engineering work experience Experience applying automated functional test development products is necessary. Knowledge, Skills, and Abilities Required: Electrical and Mechanical technical competency to effectively provide sales and application support Effective verbal and written communication skills with all stakeholders, project team members, management, clients, etc. Ability to present proposals Solid analytical skills; able to resolve very complex technical problems with innovative solutions Capacity to deal with a high workload and deadline pressure Proficiency with Microsoft Office Suite Requires a strong initiative, proactive nature and a sense of urgency Ability to occasionally travel to client locations for meetings (less than 5%) Ability to work extended hours as necessary to meet deadlines Maintains confidentiality and security of intellectual property (CUI-ITAR, Prototype) Working with ERP (IFS). Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, crouch, and twist as required Majority of time is spent using a computer for completing work Ability to lift and carry up to 20 lbs. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The salary range is $85,000 - $105,000 per year. Compensation includes base salary and performance-based quarterly profit sharing. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc. is proud to be an Equal Opportunity Employer. We do not discriminate based on identity, race, color, religion, national origin or ancestry, sex (including sexual identity), age, physical or mental disability, pregnancy, veteran or military status, unfavorable discharge from military service, genetic information, sexual orientation, marital status, order of protection status, citizenship status, or any other legally recognized protected basis under federal, state, or local law. Because Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI2af-9002
WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Provide end to end development of electrical and/or software solutions for custom functional test systems including, writing requirements; test system development and integration; acceptance testing and technical support. Major Areas of Accountability: Develop test system requirements Design electrical/software solutions that satisfy test system requirements Lead or participate in design review meetings Collaborate with other engineering disciplines to ensure effective overall system design Provide technical leadership on projects involving multiple engineers, including leading the overall design approach partitioning work among the team, and sequencing detailed design activities to support the overall project schedule Support the sales process by providing technical expertise in customer proposals Provides effective communication with project team members, including project status, risks, and suggestions to project leadership Collaborate with customers as needed to accomplish customer goals In achieving your goals, you will be part of an integration/design team which in most cases will include a project manager, a mechanical engineer, and the manufacturing/production group. This team could be comprised of members that are located locally or globally Education and Experience: Bachelor's Degree in Electrical Engineering, Computer Science, or equivalent experience in a test engineering environment 8 years of related engineering experience Automated functional test development experience desirable Knowledge, Skills, and Abilities: Ability to select test hardware based on a test specification Knowledge of Visio. Altium PCB designer experience is a plus Test software design skills in one or more of the following: Application software development skills in Microsoft Visual Studio (VB.NET/C#) and/or NI LabVIEW/Test Stand program development certification Analyze existing test solution (electrical/software) and understand the design for maintenance or updating/upgrading Ability to design complex hardware and software solutions. Solid analytical skills; able to resolve technical problems with innovative solutions Proven ability to manage working on multiple projects at a time while paying strict attention to detail Proficiency with Microsoft Office Suite This position may require working additional hours during periods of peak demand Maintains confidentiality and security of intellectual property (ITAR, Prototype) Mentor technicians and engineers Participate in company initiatives such as: ISO processes, continuous improvement projects, Kaizen meetings. Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 20 lbs. Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range is $85,000 to $130,000 per year and represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with nine paid holidays. A summary of benefits can be provided by request via email to . If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI2e06705a6-
01/01/2026
Full time
WARNING: This role is only for motivated people with great ideas who thrive in a culture of innovation! About the job Who we are: Circuit Check is the market-leading provider of automated test systems and test fixtures for complex electronic products for the automotive, military/aerospace, medical, industrial, and computer networking industries. At Circuit Check, we believe that innovation is a must, and that a challenging and robust environment where the work is consistently new and cutting edge is the best way to foster creativity. If you are ready to further your career in a fast-paced, technology driven organization where our test designs impact products that are used by millions of people around the world every day, then we invite you to join us at Circuit Check. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Provide end to end development of electrical and/or software solutions for custom functional test systems including, writing requirements; test system development and integration; acceptance testing and technical support. Major Areas of Accountability: Develop test system requirements Design electrical/software solutions that satisfy test system requirements Lead or participate in design review meetings Collaborate with other engineering disciplines to ensure effective overall system design Provide technical leadership on projects involving multiple engineers, including leading the overall design approach partitioning work among the team, and sequencing detailed design activities to support the overall project schedule Support the sales process by providing technical expertise in customer proposals Provides effective communication with project team members, including project status, risks, and suggestions to project leadership Collaborate with customers as needed to accomplish customer goals In achieving your goals, you will be part of an integration/design team which in most cases will include a project manager, a mechanical engineer, and the manufacturing/production group. This team could be comprised of members that are located locally or globally Education and Experience: Bachelor's Degree in Electrical Engineering, Computer Science, or equivalent experience in a test engineering environment 8 years of related engineering experience Automated functional test development experience desirable Knowledge, Skills, and Abilities: Ability to select test hardware based on a test specification Knowledge of Visio. Altium PCB designer experience is a plus Test software design skills in one or more of the following: Application software development skills in Microsoft Visual Studio (VB.NET/C#) and/or NI LabVIEW/Test Stand program development certification Analyze existing test solution (electrical/software) and understand the design for maintenance or updating/upgrading Ability to design complex hardware and software solutions. Solid analytical skills; able to resolve technical problems with innovative solutions Proven ability to manage working on multiple projects at a time while paying strict attention to detail Proficiency with Microsoft Office Suite This position may require working additional hours during periods of peak demand Maintains confidentiality and security of intellectual property (ITAR, Prototype) Mentor technicians and engineers Participate in company initiatives such as: ISO processes, continuous improvement projects, Kaizen meetings. Physical Requirements (these physical requirements must be performed with or without accommodation): Majority of time is spent in usual office working conditions Ability to sit for extended lengths of time is required; bend, reach, stoop, and twist as required Use of an office computer for completing work Limited exposure to a manufacturing area which may entail exposure to dirt, dust, and other attributes common to this environment Ability to lift and carry up to 20 lbs. Minimal travel may be required (less than 5%) This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). Circuit Check is a federal contractor, we participate in the E-Verify program in certain locations, as required by law. Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. Individual base pay is based on various factors, including work location, relevant experience and skills, the responsibility of the role, and job duties/requirements. The listed range is $85,000 to $130,000 per year and represents the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. The range was determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with nine paid holidays. A summary of benefits can be provided by request via email to . If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. We'll do all we can to ensure you're set up for success during our interview process while upholding your privacy, including requests for accommodation. PI2e06705a6-
About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics. Our newly formed Technology and Solutions Group (TSG) is focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking a Field Applications Engineer (FAE) to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our software and data solutions, including WATS and TestPartner. The ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Reporting to the Director of Technology and Solutions Group, the Field Applications Engineer will travel primarily to customer sites and facilities throughout the US (up to 50% travel). Sales & Customer Engagement Partner with Account Managers during the sales process to define customer requirements and articulate the Circuit Check value proposition. Conduct technical presentations, demos, and system walk-throughs that connect test engineering challenges to CCI's product capabilities. Support proposal development by helping estimate scope, identify risks, and ensure alignment between customer expectations and delivered functionality. Attend customer meetings and trade events as a technical representative and subject matter expert. Support new business models for pre-sale engagement include test development consultation early in the design process Aftermarket & Field Support Serve as the primary post-delivery point of contact for technical issues on Circuit Check functional test systems. Provide both remote and on-site support for troubleshooting, configuration, and system optimization. Coordinate with internal engineering teams to resolve escalations efficiently and document corrective actions. Develop and deliver customer training on best practices for fixture use, data collection, and maintenance. WATS & Test Data Management Act as the first-line expert for WATS-helping customers interpret data trends, configure dashboards, and extract actionable insights. Troubleshoot data integration issues, ensuring reliable data flow between production systems and WATS. Create and maintain standard procedures for onboarding new customers onto WATS, including user setup and training. Learn how to write basic WATS data converters or work with internal software resources when they are required. Product Champion - TestPartner Serve as Product Champion for TestPartner, Circuit Check's cybersecurity and test data management solution. Demonstrate TestPartner functionality during customer engagements and trade events. Collaborate with Product Management to collect customer feedback and identify enhancement opportunities. Create application notes, user guides, and case studies showcasing TestPartner's capabilities in production environments. Cross-Functional Collaboration Interface with engineering, software, and manufacturing teams to ensure that customer insights inform future product development. Partner with marketing to develop technical collateral that effectively communicates Circuit Check's differentiators. Participate in internal training to maintain deep product knowledge across evolving hardware and software platforms. Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or related technical field (or equivalent practical experience). 5+ years in test engineering, field applications, or technical sales support roles within electronics, automotive, or defense industries. Familiarity with functional test systems, data acquisition, or automated test equipment (ATE) concepts. Working knowledge of test data management platforms (WATS preferred). Experience with LabVIEW, Python, or C/C++ for test data or automation environments a plus. Preferred to have understanding of cybersecurity fundamentals, networked test environments, and production data systems. Strong communicator able to translate between engineering and customer perspectives. Excellent troubleshooting, documentation, and training abilities. Self-directed, collaborative, and customer-focused; able to manage multiple accounts and tasks concurrently. Comfortable working in dynamic technical environments and traveling to customer sites. Experience in contract manufacturing, electronics test, or ATE integrator environments. Hands-on familiarity with Circuit Check test systems, WATS, or TestPartner. Prior experience presenting at trade shows or conducting customer training sessions. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The listed range of $82,000 - $110,000 represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. Ranges were determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. PI934035a517ec-0249
01/01/2026
Full time
About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics. Our newly formed Technology and Solutions Group (TSG) is focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking a Field Applications Engineer (FAE) to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our software and data solutions, including WATS and TestPartner. The ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Reporting to the Director of Technology and Solutions Group, the Field Applications Engineer will travel primarily to customer sites and facilities throughout the US (up to 50% travel). Sales & Customer Engagement Partner with Account Managers during the sales process to define customer requirements and articulate the Circuit Check value proposition. Conduct technical presentations, demos, and system walk-throughs that connect test engineering challenges to CCI's product capabilities. Support proposal development by helping estimate scope, identify risks, and ensure alignment between customer expectations and delivered functionality. Attend customer meetings and trade events as a technical representative and subject matter expert. Support new business models for pre-sale engagement include test development consultation early in the design process Aftermarket & Field Support Serve as the primary post-delivery point of contact for technical issues on Circuit Check functional test systems. Provide both remote and on-site support for troubleshooting, configuration, and system optimization. Coordinate with internal engineering teams to resolve escalations efficiently and document corrective actions. Develop and deliver customer training on best practices for fixture use, data collection, and maintenance. WATS & Test Data Management Act as the first-line expert for WATS-helping customers interpret data trends, configure dashboards, and extract actionable insights. Troubleshoot data integration issues, ensuring reliable data flow between production systems and WATS. Create and maintain standard procedures for onboarding new customers onto WATS, including user setup and training. Learn how to write basic WATS data converters or work with internal software resources when they are required. Product Champion - TestPartner Serve as Product Champion for TestPartner, Circuit Check's cybersecurity and test data management solution. Demonstrate TestPartner functionality during customer engagements and trade events. Collaborate with Product Management to collect customer feedback and identify enhancement opportunities. Create application notes, user guides, and case studies showcasing TestPartner's capabilities in production environments. Cross-Functional Collaboration Interface with engineering, software, and manufacturing teams to ensure that customer insights inform future product development. Partner with marketing to develop technical collateral that effectively communicates Circuit Check's differentiators. Participate in internal training to maintain deep product knowledge across evolving hardware and software platforms. Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or related technical field (or equivalent practical experience). 5+ years in test engineering, field applications, or technical sales support roles within electronics, automotive, or defense industries. Familiarity with functional test systems, data acquisition, or automated test equipment (ATE) concepts. Working knowledge of test data management platforms (WATS preferred). Experience with LabVIEW, Python, or C/C++ for test data or automation environments a plus. Preferred to have understanding of cybersecurity fundamentals, networked test environments, and production data systems. Strong communicator able to translate between engineering and customer perspectives. Excellent troubleshooting, documentation, and training abilities. Self-directed, collaborative, and customer-focused; able to manage multiple accounts and tasks concurrently. Comfortable working in dynamic technical environments and traveling to customer sites. Experience in contract manufacturing, electronics test, or ATE integrator environments. Hands-on familiarity with Circuit Check test systems, WATS, or TestPartner. Prior experience presenting at trade shows or conducting customer training sessions. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The listed range of $82,000 - $110,000 represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. Ranges were determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. PI934035a517ec-0249
About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics. Our newly formed Technology and Solutions Group (TSG) is focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking a Field Applications Engineer (FAE) to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our software and data solutions, including WATS and TestPartner. The ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Reporting to the Director of Technology and Solutions Group, the Field Applications Engineer will travel primarily to customer sites and facilities throughout the US (up to 50% travel). Sales & Customer Engagement Partner with Account Managers during the sales process to define customer requirements and articulate the Circuit Check value proposition. Conduct technical presentations, demos, and system walk-throughs that connect test engineering challenges to CCI's product capabilities. Support proposal development by helping estimate scope, identify risks, and ensure alignment between customer expectations and delivered functionality. Attend customer meetings and trade events as a technical representative and subject matter expert. Support new business models for pre-sale engagement include test development consultation early in the design process Aftermarket & Field Support Serve as the primary post-delivery point of contact for technical issues on Circuit Check functional test systems. Provide both remote and on-site support for troubleshooting, configuration, and system optimization. Coordinate with internal engineering teams to resolve escalations efficiently and document corrective actions. Develop and deliver customer training on best practices for fixture use, data collection, and maintenance. WATS & Test Data Management Act as the first-line expert for WATS -helping customers interpret data trends, configure dashboards, and extract actionable insights. Troubleshoot data integration issues, ensuring reliable data flow between production systems and WATS. Create and maintain standard procedures for onboarding new customers onto WATS, including user setup and training. Learn how to write basic WATS data converters or work with internal software resources when they are required. Product Champion - TestPartner Serve as Product Champion for TestPartner, Circuit Check's cybersecurity and test data management solution. Demonstrate TestPartner functionality during customer engagements and trade events. Collaborate with Product Management to collect customer feedback and identify enhancement opportunities. Create application notes, user guides, and case studies showcasing TestPartner's capabilities in production environments. Cross-Functional Collaboration Interface with engineering, software, and manufacturing teams to ensure that customer insights inform future product development. Partner with marketing to develop technical collateral that effectively communicates Circuit Check's differentiators. Participate in internal training to maintain deep product knowledge across evolving hardware and software platforms. Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or related technical field (or equivalent practical experience). 5+ years in test engineering, field applications, or technical sales support roles within electronics, automotive, or defense industries. Familiarity with functional test systems, data acquisition, or automated test equipment (ATE) concepts. Working knowledge of test data management platforms (WATS preferred). Experience with LabVIEW, Python, or C/C++ for test data or automation environments a plus. Preferred to have understanding of cybersecurity fundamentals, networked test environments, and production data systems. Strong communicator able to translate between engineering and customer perspectives. Excellent troubleshooting, documentation, and training abilities. Self-directed, collaborative, and customer-focused; able to manage multiple accounts and tasks concurrently. Comfortable working in dynamic technical environments and traveling to customer sites. Experience in contract manufacturing, electronics test, or ATE integrator environments. Hands-on familiarity with Circuit Check test systems, WATS, or TestPartner. Prior experience presenting at trade shows or conducting customer training sessions. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The listed range of $82,000 - $110,000 represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. Ranges were determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. PIe555f6ffa5cb-0249
01/01/2026
Full time
About the job Who we are: Circuit Check is a global leader in test systems and engineering solutions for complex electronics. Our newly formed Technology and Solutions Group (TSG) is focused on building the next generation of innovative, scalable, and intelligent test solutions that power our customers' success across industries. We're seeking a Field Applications Engineer (FAE) to support our growing portfolio of functional and in-circuit test solutions. This role bridges the gap between engineering and the customer-helping sales account managers translate technical capabilities into business value, ensuring post-delivery success, and serving as a product champion for our software and data solutions, including WATS and TestPartner. The ideal candidate is a technically fluent communicator who enjoys problem solving, explaining complex systems in practical terms, and strengthening customer relationships through trust, responsiveness, and domain expertise. Our design staff includes electrical, software, mechanical engineers, and project managers. Our systems are supported by staff throughout the United States, Canada, Mexico, Europe, Malaysia, and China. Position Summary Reporting to the Director of Technology and Solutions Group, the Field Applications Engineer will travel primarily to customer sites and facilities throughout the US (up to 50% travel). Sales & Customer Engagement Partner with Account Managers during the sales process to define customer requirements and articulate the Circuit Check value proposition. Conduct technical presentations, demos, and system walk-throughs that connect test engineering challenges to CCI's product capabilities. Support proposal development by helping estimate scope, identify risks, and ensure alignment between customer expectations and delivered functionality. Attend customer meetings and trade events as a technical representative and subject matter expert. Support new business models for pre-sale engagement include test development consultation early in the design process Aftermarket & Field Support Serve as the primary post-delivery point of contact for technical issues on Circuit Check functional test systems. Provide both remote and on-site support for troubleshooting, configuration, and system optimization. Coordinate with internal engineering teams to resolve escalations efficiently and document corrective actions. Develop and deliver customer training on best practices for fixture use, data collection, and maintenance. WATS & Test Data Management Act as the first-line expert for WATS -helping customers interpret data trends, configure dashboards, and extract actionable insights. Troubleshoot data integration issues, ensuring reliable data flow between production systems and WATS. Create and maintain standard procedures for onboarding new customers onto WATS, including user setup and training. Learn how to write basic WATS data converters or work with internal software resources when they are required. Product Champion - TestPartner Serve as Product Champion for TestPartner, Circuit Check's cybersecurity and test data management solution. Demonstrate TestPartner functionality during customer engagements and trade events. Collaborate with Product Management to collect customer feedback and identify enhancement opportunities. Create application notes, user guides, and case studies showcasing TestPartner's capabilities in production environments. Cross-Functional Collaboration Interface with engineering, software, and manufacturing teams to ensure that customer insights inform future product development. Partner with marketing to develop technical collateral that effectively communicates Circuit Check's differentiators. Participate in internal training to maintain deep product knowledge across evolving hardware and software platforms. Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or related technical field (or equivalent practical experience). 5+ years in test engineering, field applications, or technical sales support roles within electronics, automotive, or defense industries. Familiarity with functional test systems, data acquisition, or automated test equipment (ATE) concepts. Working knowledge of test data management platforms (WATS preferred). Experience with LabVIEW, Python, or C/C++ for test data or automation environments a plus. Preferred to have understanding of cybersecurity fundamentals, networked test environments, and production data systems. Strong communicator able to translate between engineering and customer perspectives. Excellent troubleshooting, documentation, and training abilities. Self-directed, collaborative, and customer-focused; able to manage multiple accounts and tasks concurrently. Comfortable working in dynamic technical environments and traveling to customer sites. Experience in contract manufacturing, electronics test, or ATE integrator environments. Hands-on familiarity with Circuit Check test systems, WATS, or TestPartner. Prior experience presenting at trade shows or conducting customer training sessions. This job description reflects management's assignment of key responsibilities; it does not prescribe or restrict the tasks that may be assigned. Applicants must be legally authorized to work in the United States without needing sponsorship for an employment visa (e.g., H1B status). The listed range of $82,000 - $110,000 represent the full earning potential in this position. Starting salaries for well-qualified new hires are typically around the midpoint of the range. Ranges were determined by a market-based compensation approach; we used data from trusted third-party compensation sources to set equitable, consistent, and competitive ranges. We also evaluate compensation annually, identify any changes in the market and make adjustments to our ranges and existing employee compensation as needed. Base pay is only one element of an employee's total compensation at Circuit Check. Employees (and their dependents in most plans) are covered by medical, dental, vision, basic life, short- and long-term disability and accidental death and dismemberment insurance. Employees are able to enroll in Circuit Check's 401k plan, in which the Company will match 50% of your contributions up to 6% with a maximum contribution. Paid time off includes vacation and sick time along with paid holidays. A summary of benefits can be provided by request via email to . Circuit Check, Inc is an Equal Opportunity and Affirmative Action employer. No employee nor applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. PIe555f6ffa5cb-0249