On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
08/21/2026
Full time
On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
08/17/2026
Full time
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
08/17/2026
Full time
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
08/09/2026
Full time
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
08/09/2026
Full time
Job Posting Title: Lead Photonics System Engineer Jabil is seeking a Lead Photonics System Engineer focused on enabling design and manufacturing services for cutting edge Co-Packaged-Optics (CPO) systems, which present new challenges with the integration density of photonic elements at the box and rack level at the EMS environment. This position engages with leading edge technology companies. You will help transform photonics as an industry, while contributing to the rapid transformative growth within the Intelligent Infrastructure business unit. Lead photonics systems engineers in this team have responsibility for a diverse array of functions, all rooted on their deep technical understanding of photonic communication links, components, and wireline systems. The job scope includes establishing product engineering expertise for photonic systems both in the central engineering organization as well as the manufacturing sites, early client engagement to understand the requirements and potential manufacturing yield risks, designing test and debug strategy, and providing optical system design services as part of Jabil's design services capabilities. Note: This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. You are a leader within a global manufacturing team applying photonics technology to the manufacturing of server and racks for datacenters. Please note that this position requires more than 50% travel. You can be located anywhere in the USA for this position as a result. What will you do? - Provide product subject matter expertise to support manufacturing line bringup and NPI activities for CPO systems in Jabil's factories, in particular focusing on process design, yield analysis, and root-causing of failure modes to drive yield improvement. Develop test strategy, quality control gates, and rework flows with the test engineering and industrial engineering teams to establish process control, early fault detection, and effective rework flows. Define yield, throughput, and parametric-data dashboards (as well as automated data analysis) for implementation with the work cell and data engineering teams to allow SPC implementation and drive systematic yield improvement processes. Participate in client interactions to funnel in specs, requirements required for system CPO system design. Support product design phase with DFM and FMEA guidance. Train and provide technical guidance to factory product engineers through manufacturing NPI and volume ramp phases. Maintain an ongoing engagement with the factory operations and engineering teams to continuously drive process and yield improvements, provide engineering support as required for tackling manufacturing issues. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Evaluate and qualify new offerings in area of fiber-optic connectivity (such as blind-mate connectors, shuffle cables, various supporting tooling) to support design activities as well as tool adoption on factory floor. Keep abreast of new technologies pertaining to the co-packaged-optics systems with a focus on photonics packaging, fiber-optic connectivity, test and metrology methods and equipment. Perform other duties and responsibilities as required. How will you get here? - Education: Relevant 4-year Bachelor's Degree in Electrical Engineering, Physics or a similar field is required Experience: 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Knowledge, Skills, Abilities: Possesses deep expertise in photonics and optical communication links, associated component / module specs and test methods in R&D and manufacturing for defect detection. Manufacturing experience. This is NOT a lab position. This is NOT research & development. This is production scale photonics manufacturing in a hyperscale environment. 6+ years of photonics communication system (optical engine / transceiver / switch box / networking rack) development or product engineering in the datacom / telecom industry is required Capable of hands-on setting up of DC/RF electro-optical testbenches, including basic test automation coding in Python or similar. Highly detail oriented, highly organized & methodical thinker. Able to tackle engineering challenges and devise structured R&D programs for process development. Independent, action-oriented, entrepreneurial, and with high sense of product ownership. Able to travel up to 70% both domestically and internationally Advantage to experience working with manufacturing partners / in-house manufacturing of optical communication systems Advantage to product-engineering experience in NPI and volume manufacturing ramp phases of optical communication components / modules / systems. Strong preference to advanced degrees in electrical engineering or applied physics
On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
08/07/2026
Full time
On-site at our Prince George, VA facility. This requisition is to support a new factory startup manufacturing large form-factor equipment. The product will be large (shipping container size), heavy (50+ tons), and complex. This position will be part of the core factory startup and onboarding team responsible for building the operations and manufacturing staff, fitting out the building, and creating the process flow/work instructions/etc. from the ground up. Skills to include: panel and point to point wire assembly, Medium Voltage, Low Voltage, and High Power Electronic assemblies. Test Engineer 2: Requires 2+ years of experience SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. LEADERSHIP AND MANAGEMENT RESPONSIBILITIES: Recruitment and Retention: Recruit and interview Process Technicians. Communicate criteria to recruiters for Process Technician position candidates. Coach technicians in the interviewing/hiring process. Monitor team member turnover; identify key factors that can be improved; make improvements. Employee and Team Development: Identify individual and team strengths and development needs on an ongoing basis. Create and/or validate training curriculum in area of responsibility. Coach and mentor Process Technicians to deliver excellence to every internal and external customer. Performance Management: Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals). Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member's contribution to the Workcell team. Provide ongoing coaching and counseling to team member based on feedback. Express pride in staff and encourage them to feel good about their accomplishments. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of large teams and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. Communication: Provide communication forum for the exchange of ideas and information with the department. Organize verbal and written ideas clearly and use an appropriate business style. Ask questions; encourage input from team members. Assess communication style of individual team members and adapt own communication style accordingly. TECHNICAL MANAGEMENT RESPONSIBILITIES Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. Provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university; and three to five years experience Minimum of 3 years of experience with medium/high-voltage electrical testing in a high-voltage manufacturing environment (preferred). Experience running and setting up HIPOT tests (dielectric and insulation testing); HIPOT certification preferred. Ability to ensure safe test operations and identify and address safety risks. Strong troubleshooting skills for systems and equipment. Experience creating documentation for test technicians and operators. Comprehensive understanding of high-voltage standard practices, including safe handling of high-voltage materials and equipment. Ability to identify issues that could compromise high-voltage system integrity. Demonstrated understanding of high-voltage and conductive properties, including arc flash and short-circuit hazards. Completion of relevant specialized training (e.g., OSHA, NFPA 70E, Arc Flash PPE, LOTO, high-voltage handling and grounding procedures). LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC's and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual's primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. What Can Jabil Offer You? Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes: Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options 401K Match Employee Stock Purchase Plan Paid Time Off Tuition Reimbursement Life, AD&D, and Disability Insurance Commuter Benefits Employee Assistance Program Pet Insurance Adoption Assistance Annual Merit Increases Community Volunteer Opportunities
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
08/05/2026
Full time
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
08/05/2026
Full time
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
08/05/2026
Full time
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.
08/05/2026
Full time
This position supports hybrid work schedule depending on organization needs. Jabil is a leading product solutions provider offering end-to-end design, manufacturing, supply chain, and product management services. With operations in over 100 facilities across 30 countries, Jabil delivers innovative, integrated, and customized solutions to clients across diverse industries-including automotive, consumer lifestyle and wearables, defense and aerospace, smart home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging, and printing. JOB SUMMARY Jabil is seeking a Manufacturing Test Development Manager to lead the development and deployment of large-scale production software systems supporting our Intelligent Infrastructure division. You will be applying unique and innovative approaches to solving problems within a large-scale manufacturing production environment. You and your team will be responsible for contributing to the end-to-end architecture, definition, development and production deployment of production software applications and infrastructure spanning multiple customers and manufacturing regions. You will also be responsible for interfacing with internal engineering, manufacturing and quality teams and our end customers to ensure your software deliverables meet the rigorous standards of Jabil's world-class manufacturing environments. This is not a traditional QA manager nor manual test role. This position is focused on leading teams that design, build, and deploy production-grade software platforms, automation systems, and test infrastructure across global manufacturing environments, with a strong emphasis on scalable software development and system architecture. You will lead a team of software engineers and play a key role in technical decision-making, architecture strategy, and cross-functional leadership, partnering with engineering, manufacturing, quality, and customers to deliver scalable, high-impact solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES: LEADERSHIP AND MANAGEMENT RESPONSIBILITIES People manager for a team of software developers and product engineers in support of global cloud operations. Attract, hire, onboard, lead, coach, mentor and inspire your team to deliver the best in class for our customers and employees Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines). Solicit ongoing self and team feedback from the business unit (BU), customer and team members. Perform team member evaluations professionally and on time. Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals. Coordinate activities of team and keep them focused in times of crises. Ensure recognition and rewards are managed fairly and consistently in area of responsibility. FUNCTIONAL MANAGEMENT RESPONSIBILITIES Plan and formulate aspects of Customer BU projects such as objective or purpose of project, applications derived from findings, cost, and required technical resources. Provide direction on software design, development, and automation strategies to improve, modify, or create new systems and processes. Oversee key projects, processes and performance reports, data, and analysis. Develop, determine, and implement policies, procedures and programs. Analyze technology trends, software tooling, and resource needs to effectively plan projects. Oversee definition and collaboration on overall test infrastructure and application architectures with a strong emphasis on scalable software systems. Lead creation of high-level software design specifications and system architecture decisions. Drive development of production infrastructure and related application code and automation frameworks. Lead and participate in peer/code reviews to ensure software quality and maintainability. Contribute to and improve software build methodology, CI/CD pipelines, procedures, and engineering environments. Provide operational and development support for software platforms and test infrastructure deployed at production facilities. JOB QUALIFICATIONS and KNOWLEDGE REQUIREMENTS: Knowledge of professional software engineering practices across the complete SDLC, including coding standards, code reviews, source control management, build processes, testing, and operations. Agile, CI/CD, and SDLC process implementation and application experience. Strong expertise in programming/scripting languages: Python (primary), BASH; Java experience a plus. Linux development experience with a solid understanding of system fundamentals and internals (Ubuntu, CentOS). Experience with containerization and virtualization environments (VMware, Docker). Solid understanding of large-scale distributed systems, including multi-tier architectures, application security, monitoring, and storage systems. Experience with front-end and back-end Web UI development. Experience with common web APIs (REST, XML-RPC). Experience with code versioning tools (Git preferred). Experience with hardware and API solutions for controlling, managing and stressing L10 devices (servers, network and storage SSDs, NVMe) such as IPMI, Redfish, FIO, Linpack, memtester. Experience with virtual machine configuration (DHCP, PXE boot, nginx), VMware preferred. Familiarity with enterprise data center networking (L1-L3 concepts such as BGP, DHCP Relay, ECMP); Arista CloudVision is a plus. EDUCATION & EXPERIENCE REQUIREMENTS BS degree in Electrical/Computer Engineering, Computer Science, or related field. MS preferred. 10+ years' experience in a software development/test capacity with enterprise server, storage, or networking products. 3+ years people management experience. Excellent verbal and written communication skills. Prior experience directly managing software development teams Experience managing remote, multi-national and geographically dispersed development teams. Domestic and/or International travel, up to 25%, may be required.