Summary Designs, develops, and implements cost-effective automated methods of functionally testing and troubleshooting manufactured product including electronic assemblies and printed circuit boards. Prepares test and diagnostic programs, designs test fixtures and equipment, and completes specifications and procedures for new products. Scope of work will include new product development (NPD), legacy equipment support, and continuation engineering. This test equipment consists of electronic / electrical / mechanical measurement and controls, mechanical fixtures and software which are used in global manufacturing facilities to produce Rockwell Automation products Roles & Responsibilities • Develop and debug test software to control the electrical and mechanical components of the functional test system to provide a robust, reliable and repeatable manufacturing test system. • Create and release documentation on all aspects of the test solution. • Test specification to document product testing and coverage. • System/Test Fixture wiring schematics in AutoCAD Electrical. • System/Test Fixture BOM (Bill of Materials). • Create User s guide to assist plant engineering with long term support. • Test software and documentation released into appropriate source control location. Minimum Qualifications Minimumof 5 years of experience as a Manufacturing Functional Test Engineer creatingand supporting test solutions Abilityto independently design, develop, implement and support test programs forautomated electronic test equipment that test electronic manufactured productusing C# or other object oriented text based languages (National InstrumentTest Stand experience is a plus). Experiencewriting test software with communications protocols such as Device Net,RS485/422, TCP/IP, CAN, etc. Experiencewriting test software to communicate with electronic instruments like Meters,Power Supplies, O-Scopes. Abilityto create test plans, user guides and test specification documentation Strongunderstanding of electronics (ohms law, ability to read and understandelectronic schematics for printed circuit boards) Abilityto review product electronic schematics and evaluate what stimulus and response(outputs) are required in order to fully test the manufactured product. Experiencedeveloping manufacturing test solutions for analog and digital electronics PLCprogramming knowledge a plus Must befluent in reading, writing, and speaking English. Exhibitgood interpersonal, verbal, and written communication skills, the ability towork in teams, and very strong problem solving skills. Bachelor'sdegree in Electrical Engineering or equivalent education or experience Required Skills Work Authorization US Citizen Green Card
12/27/2025
Summary Designs, develops, and implements cost-effective automated methods of functionally testing and troubleshooting manufactured product including electronic assemblies and printed circuit boards. Prepares test and diagnostic programs, designs test fixtures and equipment, and completes specifications and procedures for new products. Scope of work will include new product development (NPD), legacy equipment support, and continuation engineering. This test equipment consists of electronic / electrical / mechanical measurement and controls, mechanical fixtures and software which are used in global manufacturing facilities to produce Rockwell Automation products Roles & Responsibilities • Develop and debug test software to control the electrical and mechanical components of the functional test system to provide a robust, reliable and repeatable manufacturing test system. • Create and release documentation on all aspects of the test solution. • Test specification to document product testing and coverage. • System/Test Fixture wiring schematics in AutoCAD Electrical. • System/Test Fixture BOM (Bill of Materials). • Create User s guide to assist plant engineering with long term support. • Test software and documentation released into appropriate source control location. Minimum Qualifications Minimumof 5 years of experience as a Manufacturing Functional Test Engineer creatingand supporting test solutions Abilityto independently design, develop, implement and support test programs forautomated electronic test equipment that test electronic manufactured productusing C# or other object oriented text based languages (National InstrumentTest Stand experience is a plus). Experiencewriting test software with communications protocols such as Device Net,RS485/422, TCP/IP, CAN, etc. Experiencewriting test software to communicate with electronic instruments like Meters,Power Supplies, O-Scopes. Abilityto create test plans, user guides and test specification documentation Strongunderstanding of electronics (ohms law, ability to read and understandelectronic schematics for printed circuit boards) Abilityto review product electronic schematics and evaluate what stimulus and response(outputs) are required in order to fully test the manufactured product. Experiencedeveloping manufacturing test solutions for analog and digital electronics PLCprogramming knowledge a plus Must befluent in reading, writing, and speaking English. Exhibitgood interpersonal, verbal, and written communication skills, the ability towork in teams, and very strong problem solving skills. Bachelor'sdegree in Electrical Engineering or equivalent education or experience Required Skills Work Authorization US Citizen Green Card
Summary Network Engineer sought for support of network services, components, and project implementation. The candidate will be focusing on LTM/GTM and VPN services that includes Palo Alto (GlobalProtect) and F5 (APM module). The ideal candidate will be mid-senior level and have at least 2-4 years minimum experience in an enterprise environment Roles & Responsibilities Support Administration of a 24x7 Infrastructure Perform Troubleshooting in all areas of the OSI model Perform Root Cause Analysis (RCA)-Document problems/issues for future reference Monitor Performance and implement performance tuning if necessary Work effectively on cross-departmental projects Generate and maintain documentation as it pretains to network configuration, processes, service records, etc Provide prompt communication and status reports on critical activities Available for 24x7 support on specified infrastructure needs Ideal Requirements: F5 End to End VIP and Wide IP Creation SNAT Certificates one-arm vs two-arm-records regions profiles monitoring DNS VPN and Firewall Services Familiar with GlobalProtect/Prisma Access from Palo Alto F5 APM from F5 endpoint client behavior endpoint compliance check Panorama Knowledgeable with ruleset evaluation traffic log evaluation rules auditing-managing and creating addition to the technical requirements, the candidate should: have experience in a team dynamic environment have the ability to quickly adapt in a fast paced environment have the ability to multitask and work independently
12/27/2025
Summary Network Engineer sought for support of network services, components, and project implementation. The candidate will be focusing on LTM/GTM and VPN services that includes Palo Alto (GlobalProtect) and F5 (APM module). The ideal candidate will be mid-senior level and have at least 2-4 years minimum experience in an enterprise environment Roles & Responsibilities Support Administration of a 24x7 Infrastructure Perform Troubleshooting in all areas of the OSI model Perform Root Cause Analysis (RCA)-Document problems/issues for future reference Monitor Performance and implement performance tuning if necessary Work effectively on cross-departmental projects Generate and maintain documentation as it pretains to network configuration, processes, service records, etc Provide prompt communication and status reports on critical activities Available for 24x7 support on specified infrastructure needs Ideal Requirements: F5 End to End VIP and Wide IP Creation SNAT Certificates one-arm vs two-arm-records regions profiles monitoring DNS VPN and Firewall Services Familiar with GlobalProtect/Prisma Access from Palo Alto F5 APM from F5 endpoint client behavior endpoint compliance check Panorama Knowledgeable with ruleset evaluation traffic log evaluation rules auditing-managing and creating addition to the technical requirements, the candidate should: have experience in a team dynamic environment have the ability to quickly adapt in a fast paced environment have the ability to multitask and work independently
Our Prestigious Client is looking for Full Stack Software Developer in Ada, MI. Responsibilities: Work with business application owners to develop business requirements and to design, develop, and implement appropriate solutions. Think strategically, recommending opportunities for continuous improvement and innovation. Then working with America s technical leadership (EA, integration) to realize them. Set a high-level vision for the business applications that are within their span of responsibility. Translate project specifications into detailed technical specifications. Provide technical leadership for large complex projects including both internal and contract resources. Here s your stack: Java/Spring JavaScript and Node.JS Rest API Gateway AWS Kafka Jira and Confluence In this role, you will be working with a variety of applications and services to help our customers. You ll get to work on one of the most progressive teams here at Amway, and you ll have the support to progress in your software development career and beyond. Qualification: 4-6 years of Software Development, Software Engineering, Coding, or Programming experience with Java and Spring Experience with SQL Good to have Exposure to AWS or Microsoft Azure Experience with APIs preferred Bachelor s Degree Only Candidates from outside of 30 miles radius from Ada, Michigan will be considered for this position. Please do not share candidates that live within 30 miles radius from Ada, MI
12/26/2025
Our Prestigious Client is looking for Full Stack Software Developer in Ada, MI. Responsibilities: Work with business application owners to develop business requirements and to design, develop, and implement appropriate solutions. Think strategically, recommending opportunities for continuous improvement and innovation. Then working with America s technical leadership (EA, integration) to realize them. Set a high-level vision for the business applications that are within their span of responsibility. Translate project specifications into detailed technical specifications. Provide technical leadership for large complex projects including both internal and contract resources. Here s your stack: Java/Spring JavaScript and Node.JS Rest API Gateway AWS Kafka Jira and Confluence In this role, you will be working with a variety of applications and services to help our customers. You ll get to work on one of the most progressive teams here at Amway, and you ll have the support to progress in your software development career and beyond. Qualification: 4-6 years of Software Development, Software Engineering, Coding, or Programming experience with Java and Spring Experience with SQL Good to have Exposure to AWS or Microsoft Azure Experience with APIs preferred Bachelor s Degree Only Candidates from outside of 30 miles radius from Ada, Michigan will be considered for this position. Please do not share candidates that live within 30 miles radius from Ada, MI
Summary The Quality Ops Analyst 1 is responsible for the day-to-day administration of Illumina s Quality Assurance programs in support of the company s Quality Management System. The Quality Ops Analyst 1 will be involved in the development, implementation, and maintenance of Quality System processes to meet the requirements of FDA 21 CFR 820, ISO 13485, and other applicable quality and regulatory standards. Roles & Responsibilities Works with relevant departments to ensure successful implementation of quality systems and processes Device History Record Review and Product Release Supports Internal/External Quality Audit activities and other key quality initiatives, as appropriate Administers and maintains Quality System records Minimum Qualifications 1-3 years of experience in medical device Quality Assurance or Manufacturing, applying quality regulations and standards (e.g., 21 CFR 820, ISO 13485). Device History Record Review and Product Release experience Excellent interpersonal, verbal, and written communication skills Excellent attention to detail, well organized and able to work independently and in teams with minimal supervision Experience working with complex Quality System Databases and ERP systems. (e.g., SAP, etc) Bachelor s or Associate s degree in a scientific or technical field; e.g., electrical engineering, mechanical engineering, chemical engineering, biology, etc. or equivalent experience and/or certification Work Authorization US Citizen Green Card
12/17/2025
Summary The Quality Ops Analyst 1 is responsible for the day-to-day administration of Illumina s Quality Assurance programs in support of the company s Quality Management System. The Quality Ops Analyst 1 will be involved in the development, implementation, and maintenance of Quality System processes to meet the requirements of FDA 21 CFR 820, ISO 13485, and other applicable quality and regulatory standards. Roles & Responsibilities Works with relevant departments to ensure successful implementation of quality systems and processes Device History Record Review and Product Release Supports Internal/External Quality Audit activities and other key quality initiatives, as appropriate Administers and maintains Quality System records Minimum Qualifications 1-3 years of experience in medical device Quality Assurance or Manufacturing, applying quality regulations and standards (e.g., 21 CFR 820, ISO 13485). Device History Record Review and Product Release experience Excellent interpersonal, verbal, and written communication skills Excellent attention to detail, well organized and able to work independently and in teams with minimal supervision Experience working with complex Quality System Databases and ERP systems. (e.g., SAP, etc) Bachelor s or Associate s degree in a scientific or technical field; e.g., electrical engineering, mechanical engineering, chemical engineering, biology, etc. or equivalent experience and/or certification Work Authorization US Citizen Green Card