FIBERTEK, INC.
Fort Belvoir, Virginia
Fibertek, Inc. seeks a Systems Engineer to support the design, integration, and verification of advanced laser and electro-optic systems for defense, aerospace, and remote sensing applications. You will own requirements flow-down, system architecture, interface definition, and test planning for rugged, space-qualified and military-grade laser and lidar solutions. Collaborating with multidisciplinary teams, you'll lead system-level trades, support integration and troubleshooting in the lab, and ensure performance, reliability, and compliance with customer and mission requirements in a fast-paced, innovation-driven environment. Responsibilities Translate mission and customer needs into system-level requirements and specifications Develop system architectures, interface definitions, and performance budgets for laser and electro-optic systems Plan and execute system integration, verification, and validation activities Perform system-level analyses, trade studies, and modeling to optimize performance and reliability Collaborate with optical, mechanical, electrical, and software teams on design and troubleshooting Support environmental, vibration, and thermal testing for rugged and space-qualified hardware Document designs, test procedures, and results in accordance with customer and quality standards Interface with customers and partners to review requirements, designs, and test outcomes Contribute to continuous improvement of engineering processes and tools Support proposals, estimates, and technical presentations for new programs Required Skills Systems engineering Laser and electro-optic systems Requirements analysis System architecture and design Integration and testing (I&T) FPGA/embedded control interfaces Lidar/remote sensing systems Modeling and simulation tools DOORS or similar RM tools Configuration management and documentation
Fibertek, Inc. seeks a Systems Engineer to support the design, integration, and verification of advanced laser and electro-optic systems for defense, aerospace, and remote sensing applications. You will own requirements flow-down, system architecture, interface definition, and test planning for rugged, space-qualified and military-grade laser and lidar solutions. Collaborating with multidisciplinary teams, you'll lead system-level trades, support integration and troubleshooting in the lab, and ensure performance, reliability, and compliance with customer and mission requirements in a fast-paced, innovation-driven environment. Responsibilities Translate mission and customer needs into system-level requirements and specifications Develop system architectures, interface definitions, and performance budgets for laser and electro-optic systems Plan and execute system integration, verification, and validation activities Perform system-level analyses, trade studies, and modeling to optimize performance and reliability Collaborate with optical, mechanical, electrical, and software teams on design and troubleshooting Support environmental, vibration, and thermal testing for rugged and space-qualified hardware Document designs, test procedures, and results in accordance with customer and quality standards Interface with customers and partners to review requirements, designs, and test outcomes Contribute to continuous improvement of engineering processes and tools Support proposals, estimates, and technical presentations for new programs Required Skills Systems engineering Laser and electro-optic systems Requirements analysis System architecture and design Integration and testing (I&T) FPGA/embedded control interfaces Lidar/remote sensing systems Modeling and simulation tools DOORS or similar RM tools Configuration management and documentation
FIBERTEK, INC.
Fort Belvoir, Virginia
Fibertek is seeking an experienced Systems Engineer to serve as the Test Manager for the U.S. Army C5ISR Center Javelin Seeker effort. The successful candidate will provide programmatic Test and Evaluation (T&E) oversight in support of component-level verification, qualification, and contractor-executed test activities across the full acquisition life cycle and throughout the Engineering and Manufacturing Development (EMD) phase. In this role, the candidate will ensure that test planning, readiness, execution, and reporting are aligned with system requirements, program risk, and Army acquisition decision needs to achieve full component qualification. The candidate will serve as a technical advisor to government and industry stakeholders, support T&E strategy, review of contractor-developed test documentation, readiness assessments, evaluation of test results, and independent technical assessments of system progress and qualification status. The Test Manager will also lead multi-agency test synchronization in coordination with Army stakeholders and test organizations in support of critical acquisition decision milestones. This role requires a strong systems engineering foundation and prior experience supporting acquisition-level test and qualification for complex defense systems, including EO/IR systems, seekers, sensors, or other electro-optical payloads. Essential Job Duties Author, update, and staff the component Test and Evaluation (T&E) strategy and test plans in alignment with System Specifications, the Requirements Verification Traceability Matrix (RVTM), and applicable Army regulations to support EMD activities and component qualification Lead Test and Evaluation Working Integrated Product Teams (T&E WIPTs) and chair Test Readiness Reviews (TRRs); participate in System Functional Reviews (SFRs), Preliminary Design Reviews (PDRs), Critical Design Reviews (CDRs), and technical interchange meetings Guide test activities in accordance with the program Systems Engineering Plan (SEP); manage the RVTM to ensure rigorous, end-to-end verification and formal requirements closure Ensure traceability between system requirements, verification methods, qualification events, and test results Establish specialized sub-working groups as required, deconflict technical issues, enable cross-IPT data sharing, and elevate unresolved risks to the Systems Engineering Integration Team (SEIT) Manage the T&E schedule within the project Integrated Master Schedule (IMS), and coordinate range facilities, assets, and test resources with the Army Test and Evaluation Command (ATEC), Redstone Test Center (RTC), White Sands Missile Range (WSMR), Program Management Offices (PMOs), and laboratory stakeholders Provide systems and test engineering oversight of contractor-performed test events; evaluate T&E-related contract data requirements including test strategies, verification plans, qualification procedures, safety documentation, and test reports for technical rigor and contractual compliance Witness, or designate project office personnel to witness, on-site and laboratory testing; monitor test data collection to support independent system evaluations Support independent technical assessment of test adequacy, qualification status, system performance, and program risk Lead technical investigations for test anomalies, root cause analyses, corrective action plans, and regression or retest activities Identify, monitor, and track T&E programmatic risks and associated mitigation plans Synthesize complex test data and risk assessments into executive-level technical briefings, system assessment reports, and suitability recommendations to inform project leadership, PM leadership, and Milestone Decision Authorities (MDAs) Minimum Requirements A bachelorâ s degree in Aerospace, Electrical, Mechanical, Optical, or Systems Engineering, or a related technical STEM discipline; equivalent military experience may be considered A minimum of 10 years of progressive systems engineering and Test and Evaluation (T&E) experience supporting defense acquisition programs Demonstrated experience supporting acquisition-level qualification, verification, and T&E activities across the full acquisition life cycle Working knowledge of U.S. Army T&E processes, including coordination with ATEC, RTC, and other government test stakeholders Demonstrated ability to lead complex T&E efforts in support of Government program objectives with limited day-to-day direction Experience developing, reviewing, or assessing test plans, procedures, readiness documentation, and test reports for complex defense systems Experience supporting the development, integration, qualification, or test and evaluation of EO/IR systems, seekers, sensors, or other complex electro-optical payloads Strong technical briefing, analytical, and technical writing skills Ability to effectively communicate technical results, risks, and recommendations to government and contractor stakeholders U.S. citizenship is required Active DoD Secret clearance Preferred Qualifications Previous experience supporting missile seeker, optical/IR sensor, or guidance system test and evaluation across laboratory, hardware-in-the-loop (HWIL), and flight test environments Prior experience directly supporting the Javelin Weapon System, Tactical Aviation and Ground Munitions (TAGM), or PEO Missiles and Space programs Hands-on proficiency with data analysis and reduction toolsets such as MATLAB, Python, or specialized telemetry processing software DAWIA Practitioner or equivalent certification in Test and Evaluation or Engineering, or PMP certification Salary Range: The base annual salary range for this position is $140,000-$190,000. This range reflects the compensation Fibertek reasonably expects to offer for this role. Placement within the range will depend on factors such as the scope and responsibilities of the position, the candidateâ s experience, education and training, key skills, and relevant market and business considerations. PI3af8179f6cf3-7799
Fibertek is seeking an experienced Systems Engineer to serve as the Test Manager for the U.S. Army C5ISR Center Javelin Seeker effort. The successful candidate will provide programmatic Test and Evaluation (T&E) oversight in support of component-level verification, qualification, and contractor-executed test activities across the full acquisition life cycle and throughout the Engineering and Manufacturing Development (EMD) phase. In this role, the candidate will ensure that test planning, readiness, execution, and reporting are aligned with system requirements, program risk, and Army acquisition decision needs to achieve full component qualification. The candidate will serve as a technical advisor to government and industry stakeholders, support T&E strategy, review of contractor-developed test documentation, readiness assessments, evaluation of test results, and independent technical assessments of system progress and qualification status. The Test Manager will also lead multi-agency test synchronization in coordination with Army stakeholders and test organizations in support of critical acquisition decision milestones. This role requires a strong systems engineering foundation and prior experience supporting acquisition-level test and qualification for complex defense systems, including EO/IR systems, seekers, sensors, or other electro-optical payloads. Essential Job Duties Author, update, and staff the component Test and Evaluation (T&E) strategy and test plans in alignment with System Specifications, the Requirements Verification Traceability Matrix (RVTM), and applicable Army regulations to support EMD activities and component qualification Lead Test and Evaluation Working Integrated Product Teams (T&E WIPTs) and chair Test Readiness Reviews (TRRs); participate in System Functional Reviews (SFRs), Preliminary Design Reviews (PDRs), Critical Design Reviews (CDRs), and technical interchange meetings Guide test activities in accordance with the program Systems Engineering Plan (SEP); manage the RVTM to ensure rigorous, end-to-end verification and formal requirements closure Ensure traceability between system requirements, verification methods, qualification events, and test results Establish specialized sub-working groups as required, deconflict technical issues, enable cross-IPT data sharing, and elevate unresolved risks to the Systems Engineering Integration Team (SEIT) Manage the T&E schedule within the project Integrated Master Schedule (IMS), and coordinate range facilities, assets, and test resources with the Army Test and Evaluation Command (ATEC), Redstone Test Center (RTC), White Sands Missile Range (WSMR), Program Management Offices (PMOs), and laboratory stakeholders Provide systems and test engineering oversight of contractor-performed test events; evaluate T&E-related contract data requirements including test strategies, verification plans, qualification procedures, safety documentation, and test reports for technical rigor and contractual compliance Witness, or designate project office personnel to witness, on-site and laboratory testing; monitor test data collection to support independent system evaluations Support independent technical assessment of test adequacy, qualification status, system performance, and program risk Lead technical investigations for test anomalies, root cause analyses, corrective action plans, and regression or retest activities Identify, monitor, and track T&E programmatic risks and associated mitigation plans Synthesize complex test data and risk assessments into executive-level technical briefings, system assessment reports, and suitability recommendations to inform project leadership, PM leadership, and Milestone Decision Authorities (MDAs) Minimum Requirements A bachelorâ s degree in Aerospace, Electrical, Mechanical, Optical, or Systems Engineering, or a related technical STEM discipline; equivalent military experience may be considered A minimum of 10 years of progressive systems engineering and Test and Evaluation (T&E) experience supporting defense acquisition programs Demonstrated experience supporting acquisition-level qualification, verification, and T&E activities across the full acquisition life cycle Working knowledge of U.S. Army T&E processes, including coordination with ATEC, RTC, and other government test stakeholders Demonstrated ability to lead complex T&E efforts in support of Government program objectives with limited day-to-day direction Experience developing, reviewing, or assessing test plans, procedures, readiness documentation, and test reports for complex defense systems Experience supporting the development, integration, qualification, or test and evaluation of EO/IR systems, seekers, sensors, or other complex electro-optical payloads Strong technical briefing, analytical, and technical writing skills Ability to effectively communicate technical results, risks, and recommendations to government and contractor stakeholders U.S. citizenship is required Active DoD Secret clearance Preferred Qualifications Previous experience supporting missile seeker, optical/IR sensor, or guidance system test and evaluation across laboratory, hardware-in-the-loop (HWIL), and flight test environments Prior experience directly supporting the Javelin Weapon System, Tactical Aviation and Ground Munitions (TAGM), or PEO Missiles and Space programs Hands-on proficiency with data analysis and reduction toolsets such as MATLAB, Python, or specialized telemetry processing software DAWIA Practitioner or equivalent certification in Test and Evaluation or Engineering, or PMP certification Salary Range: The base annual salary range for this position is $140,000-$190,000. This range reflects the compensation Fibertek reasonably expects to offer for this role. Placement within the range will depend on factors such as the scope and responsibilities of the position, the candidateâ s experience, education and training, key skills, and relevant market and business considerations. PI3af8179f6cf3-7799