BHE GT&S

BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting opportunity as a Manager for Engineering Projects at our White Oaks General office building in Bridgeport, WV. RESPONSIBILITIES This position is responsible for leading a team of project management professionals with an emphasis on large growth project opportunities. The project team will typically consist of engineers, technical specialists, designers, construction leads, and administrative support. Routine activities include, but are not limited to, the following: Reinforcing safety and environmental expectations and compliance for the project team Collaborating with internal stakeholders to establish and refine project estimates (commercial and operational objectives, scopes of work, milestone schedules, and cash flows) Directing and managing the design and construction of engineering projects while providing technical and field support Collaborating with internal stakeholders to actively manage project schedules and forecasts and effectively communicating updates to the executive leadership team Ensuring design and construction activities comply with all applicable company and industry standards and best management practices Directing start-up activities and providing post-audit performance and financial results Supporting investigation and resolution of engineering or other technical issues Negotiating and approving agreements and contracts QUALIFICATIONS Knowledge of company operations and the natural gas industry. Knowledge of regulatory requirements (FERC, EPA, OSHA, DOT, NACE, ASME, etc.) Knowledge of company capital and operating budget procedures. Ability to define problems, collect data, draw conclusions and negotiate contractor adjustment settlements. Ability to lead and communicate effectively and establish rapport. Demonstrated leadership and managerial qualities including direct supervision and project management experience. Education: Bachelor Preferred Degree: Engineering required. Preferred Licenses, Certifications, Qualifications or Standards: NA ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification Job Category Engineering Posting Date 2026-04-28 Apply Before 2026-05-26T03:55 00 Job Schedule Full time Locations 925 White Oaks Blvd, Bridgeport, WV, 26330, US Travel Requirements Up to 25% Relocation Assistance Available for this position dependent upon eligibility requirements Business Eastern Gas Transmission and Storage, Inc. Compensation details: 00 PI2fd514adfed4-8419

BHE GT&SJOB DESCRIPTIONBHE GT&S is currently hiring for the position of Instrument & Control Technician or Sr. Instrument & Control Technician at one of the following locations: Lightburn Extraction Plant - Jane Lew, WV Hastings Extraction Plant - Pine Grove, WV Placement will be commensurate with the candidate's knowledge, skills, and abilities. This is a great opportunity to join a dedicated team and contribute to the safe and efficient operation of our facilities.RESPONSIBILITIESThis role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression dehydration measurement transmission and storage of natural gas. Installation includes mounting wiring connecting testing configuring and programming instruments and devices. Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center. Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc. Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities. Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets. Ensure regulatory and compliance standards are met.QUALIFICATIONS Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree. Instrument & Control Technician : Two-year or higher degree in electronics engineering or related field AND a minimum of two years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months. Sr. Instrument & Control Technician : With degree, a minimum of three years direct hands-on experience with instrumentation, PLC's and Computer systems. Without degree, minimum of seven years direct hands-on experience with instrumentation, PLC's and Computer systems. Ability to lead project teams, assume project supervisor role and develop action plans. Knowledge of Natural Gas and Electric Driven Gas Compressors. Knowledge of Gas and Fire Detection Systems Knowledge of Emergency Shut Down (ESD) Systems. Both levels : Ability to interpret control system software for the purpose of diagnostic troubleshooting. Ability to pass electrical, electronic, and digital equipment troubleshooting tests. Ability to troubleshoot electrical, electronic, and pneumatic equipment. Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams. Ability to define specifications and requisition instrumentation and control equipment. Ability to define problems, collect data and draw conclusions. Ability to work independently and as a team member. Ability to communicate effectively and develop rapport. Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.) Ability to operate personal computer. Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems Knowledge of electric driven compressors may be required. Knowledge of electrical and electronic theory and principles Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same. Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS) Knowledge of Variable Frequency Drives (VFD) Knowledge of Human Machine Interface (HMI) Knowledge of Ethernet Communications Equipment Knowledge of Valves and Positioners Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards Knowledge of applicable regulatory requirements Education Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree Electronics & Communications Engineering Preferred Licenses, Certifications, Qualifications or Standards: ISA Certification ( Required: within one year of ISA eligibility, not to exceed 15 months) CHAMPION : Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customersEmployees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs.ABOUT THE TEAMBHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation.JOB INFOJob Identification Job Category Pipeline OperationsPosting Date 2026-04-15Apply Before 2026-05-01T03:59 00Job Schedule Full timeLocations 6480 Old Mill Rd, Jane Lew, WV, 26378, USTravel Requirements Up to 25%Relocation Assistance Not currently offered for this positionBusiness Eastern Gas Transmission and Storage, Inc.Compensation details: 32.84-44.38PI073f395b24ce-5743

BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting career opportunity as a LNG Plant Control System Technician/Senior LNG Plant Control Systems Technician at our Cove Point facility located in Lusby, MD. RESPONSIBILITIES The LNG Plant Control Systems Technician/Senior LNG Plant Control System Technician Distributed Control System (DCS) reports directly to the Supervisor-LNG Operations (Plant Controls System) and is a member of multi-disciplined team responsible for the safe, compliant and reliable operation and maintenance of a liquefied natural gas (LNG) import/export and re-gasification terminal Distributed Control System (DCS) including LNG process systems infrastructure, emergency response systems, power/steam generation rotating machinery and auxiliary control support systems. The LNG Plant Control Systems Technician/Senior LNG Plant Control System Technician (DCS) is responsible for maintaining, troubleshooting, repairing, and upgrading complex distributed control systems, associated process control/automation platforms and related control components that are typically found in large-scale industrial environments such as LNG terminals, power generation facilities, chemical and petrochemical plants, manufacturing operations, NGL processing facilities, cryogenic natural gas processing plants, and other hydrocarbon facilities. Key responsibilities include the configuration, maintenance, optimization, and upgrade of DCS hardware and software, Programmable Logic Controllers (PLCs), Human-Machine Interfaces (HMIs), Operator Training Simulator (OTS), alarm management systems, industrial networking infrastructure, system administration, and cybersecurity controls. The LNG Plant Control Systems Technician/Senior LNG Plant Control System Technician is a multi-level posted position. The successful candidate will be placed at the appropriate skill level based on their demonstrated competencies, qualifications, and relevant experience. The successful candidate must be willing to work in an industrial environment and will be responsible for the reliability of the facility's Distributed Control Systems (DCS) while ensuring the facility operates in full compliance with site, company, local, state, and federal policies, regulations, and procedures while also supporting continuous improvement, reliability initiatives, and cross-functional coordination. A strong commitment to safety and adherence to established protocols is essential to maintain the safe, reliable, and efficient operation of the terminal. Duties and Responsibilities: Perform all activities with emphasis on a proactive and preventative maintenance approach based on industry's best practices, manufacturer recommendations, and regulatory requirements to include but not limited to: FERC, PHMSA, NFPA, USCG, MDOL, MDE and EPA. Recognizes the safety, environmental and facility reliability consequences of actions taken maintaining the highest levels of safety and environmental compliance. Work closely with and directly support the facility's operations teams, providing DCS system technical expertise to ensure the plant control systems meet operational needs. Respond to control system issues affecting facility operations, assisting with start-ups, shutdowns, and abnormal operating conditions, and implementing improvements that enhance operational reliability and performance. Work on complex control and network systems, including troubleshooting and repairing system issues, performing detailed diagnostics, and replacing or upgrading components as required. Perform control loop logic modifications, testing, tuning, and validation across DCS, Safety Instrumented Systems (SIS), and PLCbased subsystems by analyzing process response, optimizing control parameters, and verifying system performance. Monitors and maintains the DCS and related network hardware and software for security and performance issues, troubleshooting and resolving issues when they occur. Performs periodic backup on all DCS / PLC controllers, network, and computers. Perform routine updates and configuration maintenance on OT cybersecurity compliance platforms, including asset inventory systems, whitelisting applications, intrusion detection tools, passwordvault solutions, and disasterrecovery software. Review and analyze alarm history to identify nuisance and lowvalue alarms, improving operational efficiency and supporting effective alarm management practices. Working with site's Control Engineer, submit drawing and configuration changes made on the DCS per the site's modification and Management of Change (MOC) process. Support installation, testing, and startup of new equipment. Attend required onsite and offsite training and proactively completes assigned selfstudy and qualification programs to maintain all technical and safety certifications. Obtain a solid understanding of all plant DCS, SIS, PLC control systems associated with LNG Liquefaction, LNG Regasification, Ship Loading and Power Generation processes. Utilize a Computerized Maintenance Management System (CMMS) (Maximo and Oracle) to manage assets, work orders, inventory, and scheduling to increase efficiency, reduce downtime, and streamline maintenance operations with a proactive approach. May assist in the development, implementation, and execution of DCS and OT cybersecurity policies and procedures. May be required to be on-call and/or work rotating shifts, including nights, weekends, and holidays. May perform other duties as assigned. Preferred: Emerson Delta V System Administrator level knowledge and experience for system maintenance, patching and troubleshooting. Experience with GE MK Vie Controls, Woodward Controls, Compressor Anti-surge Controls, Allen Bradly PLCs. Recent experience with LNG, petrochemical NGL, cryogenic natural gas processing, hydrocarbon processing or power generation. Startup/Commissioning experience is a plus. Maximo and Oracle experience is a plus. Relocation assistance for this position is available dependent upon meeting eligibility requirements. QUALIFICATIONS Plant Control System Technician 2+ years of related experience. Applied knowledge of automated control system instruments such as flow meters, pressure gauges, thermocouples, regulators and other industrial components. Competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulation compliance systems. Ability to provide guidance and/or training to less experienced Technicians and Operators. Competent in workstation and server software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel Analytical and deductive reasoning skills, oral and written communication skills, technical writing skills, instrumentation skills, and mathematical skills. Ability to troubleshoot and solve equipment or process problems. Ability to conduct site inspections or walk downs, including working at heights. Ability to recommend changes to DCS, instrumentation drawing and configuration documentation. Sr Plant Control System Technician A minimum of 5+ years direct experience with operations, instrumentation, DCS, PLC's and Computer systems. Applied knowledge of automated control instruments such as flow meters, pressure gauges, thermocouples, regulators, and other industrial components. Full competency in performing Distributed Controls System (DCS) or Programmable Logic Controls (PLCs) changes in logic, graphics, control loop configuration and network configuration. Previous work experience demonstrating technical knowledge of Emerson DeltaV, ABB Infi-90 and Allen Bradley control systems. Knowledge of environmental regulations and the associated control and data acquisition systems. Ability to provide guidance and/or training to Technicians and Operators. Competent in personal computer software and hardware troubleshooting and repair. Strong computer skills with a knowledge of Microsoft Word, Access, and Excel. Strong analytical and deductive reasoning, oral and written communication, technical writing, and mathematical skills. Demonstrated ability to troubleshoot and solve DCS hardware and process control problems. Full ability to conduct site inspections or walk downs, including working at heights. Experience in commissioning medium to large scale industrial control installations Demonstrated ability to maintain documentation related to the DCS and instrumentation. Contribute to a team-centric work environment based on mutual respect and integrity. Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers. Education Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate's degree). Preferred Degree Control Systems Engineering / Automation, Technical Studies . click apply for full job details