118 jobs found

Senior Aerodynamics & Aircraft Performance Engineer About the Company: Saratech is the industry-leading provider of engineering and manufacturing solutions, including Product Lifecycle Management (PLM) software, engineering and consulting services, and manufacturing hardware. The Saratech team helps customers optimize their engineering and manufacturing processes by providing extensive product development expertise and technologies. Saratech's goal is to help customers succeed by building long-term and resilient relationships. About the Opportunity: Saratech is seeking a Subject Matter Expert (SME) to join our team as a Senior Aerodynamics & Aircraft Performance Engineer. This role is focused on performing high-level aerodynamic analysis and providing ground and flight test support for fixed-wing and rotary aircraft. You will evaluate the impact of aircraft modifications on vehicle performance and aerodynamic loads, ensuring mission success for critical national security and defense projects. Salary Range: $85-$110 per hour Key Responsibilities: Perform steady-state and time-accurate Computational Fluid Dynamics (CFD) analyses. Plan, support, and execute Wind Tunnel Tests and aerodynamic design optimization studies. Perform comparative analyses of predicted aerodynamics against experimental and/or flight test data. Lead the development and enhancement of internal methods and engineering tools. Manage large, complex project initiatives with minimal oversight, influencing practices and processes across the organization. Provide technical input into new products and implement operational plans that impact functional business results. Communicate complex technical findings to stakeholders both within and outside the organization. Qualifications: Education & Experience: Bachelor's Degree (BSME or BSAE) with a minimum of 9 years of prior relevant experience. OR a Graduate Degree (MSME or MSAE) with a minimum of 7 years of prior experience. OR 13 years of prior related experience in lieu of a degree. Technical Expertise: Minimum 2 years of experience in CFD analyses, mesh generation, and post-processing. Minimum 2 years of experience in wind tunnel testing. Minimum 2 years of experience with aircraft performance analysis. Strong understanding of Applied Aerodynamics theory and numerical methods. Requirements: Must be a U.S. Citizen. Ability to obtain and maintain a SECRET security clearance. Willingness to travel and work flexible shifts/overtime as required. Preferred Additional Skills: Experience with Pointwise, NASA FUN3D, and FieldView. Experience with store separation analyses and testing. Familiarity with civil and military airworthiness requirements. Proficiency in Matlab/Simulink. High-performance computing (HPC) administration. Experience in aircraft stability and control analysis. Strong verbal and written communication skills and proficiency in Microsoft Office. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to remain in a stationary position 50% of the time. Constantly operates a computer and other office productivity machinery. The person in this position frequently communicates with other staff and clients; must be able to exchange accurate information. Benefits Insurance : All full-time regular employees (and dependents) are eligible to get medical, dental, vision coverage. Employees also can buy up on benefits like FSA, HSA, Life insurance, long and short-term disability. Comprehensive health care and wellness plans Retirement Plan: All employees can enroll in the company's 401k with company matching. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Holidays: All full-time employees will receive 8 paid holidays per year. Full-time non-exempt employees receive an extra floater holiday per year. Paid Sick Time: All full-time and part-time employees will receive 40 sick hours per year or minimum sick time required by the state. NOTE TO STAFFING AGENCIES AND RECRUITERS: Saratech does not accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Saratech will be considered the property of Saratech and may be contacted and engaged with directly by Saratech. Saratech will not pay a placement fee or any other fees to any third-party agency, firm, or recruiter who is not specifically retained with a signed fee agreement by Saratech Human Resources to conduct a candidate search. Please do not forward unsolicited resumes to our website or to any Saratech employee. Saratech will not be responsible for any fees associated with unsolicited resumes. EQUAL EMPLOYMENT OPPORTUNITY NOTICE: Paydarfar Industries, Inc. dba Saratech is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. Subject to background check Employment Type: Full Time Salary: $85 - $110 Hourly

Requires a Masters degree in Computer Science, Computer Engineering or a related field, and 3 years of experience as a software developer producing high quality web applications in adherence to an agile development process. Employer will also accept as the equivalent a Bachelor's degree in Computer Science, Computer Engineering or a related field, and 5 years of experience as a software developer producing high quality web applications in adherence to an agile development process. Experience must include: Java development with experience developing using the Spring Framework; Container creation and orchestration using Docker and Kubernetes; and Moving new features and functionalities from creating technical design documents through securing approval from stakeholders including security and product management. Qualified applicants should send resumes with Job to

Job ID: 712837BR Date posted: Apr. 08, 2026 Description:This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3,000 payment! code-extrefer WHAT WE'RE DOING Lockheed Martin, Rotary Mission Systems Cyber & Intelligence invites you to step up to one of today's most daunting challenges: the use of advanced electronics to undermine our way of life. As a cyber security professional at Lockheed Martin, you'll protect the networks that our citizens and the world depend upon each minute: Financial assets. Healthcare information. Critical infrastructure. Hazardous materials. The uninterrupted flow of energy that keeps modern life moving. Here, you'll work with cybersecurity experts on the forefront of threat protection and proactive prevention. In this fast-paced, real-world environment, you'll draw on all your education and experience as well as the resources of Lockheed Martin to keep the threats at bay. THE WORK In this role you will: • Analyze user requirements to derive software design and performance requirements • Design and code new software or modify existing software to add new features • Integrate existing software into new or modified systems or operating environments • Write or review software and system documentation • Serve as team lead at the level appropriate to the software development process being used on any particular project • Design or implement complex database or data repository interfaces/queries • Develop or implement algorithms to meet or exceed system performance and functional standards • Assist with developing and executing test procedures for software components • Develop software solutions by analyzing system performance standards, confer with users or system engineers; analyze systems flow, data usage and work processes; and investigate problem areas • Modify existing software to correct errors, to adapt to new hardware, or to improve its performance • Design, develop and modify software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design • Design or implement complex algorithms requiring adherence to strict timing, system resource, or interface constraints; Perform quality control on team products • Implement recommendations for improving documentation and software development process standards • Coordinate software system installation and monitor equipment functioning to ensure operational specifications are met WHO WE ARE The program is on fire for cyber. In support of our customer, members of the team are responsible for providing full lifecycle support including analysis, design, development, integration, testing, procurement, deployment, security, training and sustainment for collection and antenna systems. WHY JOIN US In this role you will have the opportunity to safeguard vital national security systems while advancing cutting edge cyber defense technologies. Our benefits are built to match the caliber of your work. Reliable, high-performing, and mission-ready. You'll enjoy world class resources, mentorship, continuous learning, competitive compensation, comprehensive benefits, and a supportive work life balance-all within a culture that values innovation, integrity, and collaboration. This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3000 payment! Code extrefer. Basic Qualifications: • Fourteen (14) years experience as a SWE in programs and contracts of similar scope, type, and complexity is required. Bachelor's degree in Computer Science or related discipline from an accredited college or university is required. Four (4) years of additional SWE experience on projects with similar software processes may be substituted for a bachelor's degree Candidate must possess active security clearance with a polygraph. Desired Skills: • C++ • Python • Kubernetes Clearance Level: TS/SCI w/Poly SP Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $150,800 - $265,880. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Software Engineering Type: Task Order/IDIQ Shift: First

Job ID: 712837BR Date posted: Apr. 08, 2026 Description:This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3,000 payment! code-extrefer WHAT WE'RE DOING Lockheed Martin, Rotary Mission Systems Cyber & Intelligence invites you to step up to one of today's most daunting challenges: the use of advanced electronics to undermine our way of life. As a cyber security professional at Lockheed Martin, you'll protect the networks that our citizens and the world depend upon each minute: Financial assets. Healthcare information. Critical infrastructure. Hazardous materials. The uninterrupted flow of energy that keeps modern life moving. Here, you'll work with cybersecurity experts on the forefront of threat protection and proactive prevention. In this fast-paced, real-world environment, you'll draw on all your education and experience as well as the resources of Lockheed Martin to keep the threats at bay. THE WORK In this role you will: • Analyze user requirements to derive software design and performance requirements • Design and code new software or modify existing software to add new features • Integrate existing software into new or modified systems or operating environments • Write or review software and system documentation • Serve as team lead at the level appropriate to the software development process being used on any particular project • Design or implement complex database or data repository interfaces/queries • Develop or implement algorithms to meet or exceed system performance and functional standards • Assist with developing and executing test procedures for software components • Develop software solutions by analyzing system performance standards, confer with users or system engineers; analyze systems flow, data usage and work processes; and investigate problem areas • Modify existing software to correct errors, to adapt to new hardware, or to improve its performance • Design, develop and modify software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design • Design or implement complex algorithms requiring adherence to strict timing, system resource, or interface constraints; Perform quality control on team products • Implement recommendations for improving documentation and software development process standards • Coordinate software system installation and monitor equipment functioning to ensure operational specifications are met WHO WE ARE The program is on fire for cyber. In support of our customer, members of the team are responsible for providing full lifecycle support including analysis, design, development, integration, testing, procurement, deployment, security, training and sustainment for collection and antenna systems. WHY JOIN US In this role you will have the opportunity to safeguard vital national security systems while advancing cutting edge cyber defense technologies. Our benefits are built to match the caliber of your work. Reliable, high-performing, and mission-ready. You'll enjoy world class resources, mentorship, continuous learning, competitive compensation, comprehensive benefits, and a supportive work life balance-all within a culture that values innovation, integrity, and collaboration. This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3000 payment! Code extrefer. Basic Qualifications: • Fourteen (14) years experience as a SWE in programs and contracts of similar scope, type, and complexity is required. Bachelor's degree in Computer Science or related discipline from an accredited college or university is required. Four (4) years of additional SWE experience on projects with similar software processes may be substituted for a bachelor's degree Candidate must possess active security clearance with a polygraph. Desired Skills: • C++ • Python • Kubernetes Clearance Level: TS/SCI w/Poly SP Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $150,800 - $265,880. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Software Engineering Type: Task Order/IDIQ Shift: First

Job ID: 712837BR Date posted: Apr. 08, 2026 Description:This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3,000 payment! code-extrefer WHAT WE'RE DOING Lockheed Martin, Rotary Mission Systems Cyber & Intelligence invites you to step up to one of today's most daunting challenges: the use of advanced electronics to undermine our way of life. As a cyber security professional at Lockheed Martin, you'll protect the networks that our citizens and the world depend upon each minute: Financial assets. Healthcare information. Critical infrastructure. Hazardous materials. The uninterrupted flow of energy that keeps modern life moving. Here, you'll work with cybersecurity experts on the forefront of threat protection and proactive prevention. In this fast-paced, real-world environment, you'll draw on all your education and experience as well as the resources of Lockheed Martin to keep the threats at bay. THE WORK In this role you will: • Analyze user requirements to derive software design and performance requirements • Design and code new software or modify existing software to add new features • Integrate existing software into new or modified systems or operating environments • Write or review software and system documentation • Serve as team lead at the level appropriate to the software development process being used on any particular project • Design or implement complex database or data repository interfaces/queries • Develop or implement algorithms to meet or exceed system performance and functional standards • Assist with developing and executing test procedures for software components • Develop software solutions by analyzing system performance standards, confer with users or system engineers; analyze systems flow, data usage and work processes; and investigate problem areas • Modify existing software to correct errors, to adapt to new hardware, or to improve its performance • Design, develop and modify software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design • Design or implement complex algorithms requiring adherence to strict timing, system resource, or interface constraints; Perform quality control on team products • Implement recommendations for improving documentation and software development process standards • Coordinate software system installation and monitor equipment functioning to ensure operational specifications are met WHO WE ARE The program is on fire for cyber. In support of our customer, members of the team are responsible for providing full lifecycle support including analysis, design, development, integration, testing, procurement, deployment, security, training and sustainment for collection and antenna systems. WHY JOIN US In this role you will have the opportunity to safeguard vital national security systems while advancing cutting edge cyber defense technologies. Our benefits are built to match the caliber of your work. Reliable, high-performing, and mission-ready. You'll enjoy world class resources, mentorship, continuous learning, competitive compensation, comprehensive benefits, and a supportive work life balance-all within a culture that values innovation, integrity, and collaboration. This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3000 payment! Code extrefer. Basic Qualifications: • Fourteen (14) years experience as a SWE in programs and contracts of similar scope, type, and complexity is required. Bachelor's degree in Computer Science or related discipline from an accredited college or university is required. Four (4) years of additional SWE experience on projects with similar software processes may be substituted for a bachelor's degree Candidate must possess active security clearance with a polygraph. Desired Skills: • C++ • Python • Kubernetes Clearance Level: TS/SCI w/Poly SP Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $150,800 - $265,880. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Software Engineering Type: Task Order/IDIQ Shift: First

Job ID: 712837BR Date posted: Apr. 08, 2026 Description:This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3,000 payment! code-extrefer WHAT WE'RE DOING Lockheed Martin, Rotary Mission Systems Cyber & Intelligence invites you to step up to one of today's most daunting challenges: the use of advanced electronics to undermine our way of life. As a cyber security professional at Lockheed Martin, you'll protect the networks that our citizens and the world depend upon each minute: Financial assets. Healthcare information. Critical infrastructure. Hazardous materials. The uninterrupted flow of energy that keeps modern life moving. Here, you'll work with cybersecurity experts on the forefront of threat protection and proactive prevention. In this fast-paced, real-world environment, you'll draw on all your education and experience as well as the resources of Lockheed Martin to keep the threats at bay. THE WORK In this role you will: • Analyze user requirements to derive software design and performance requirements • Design and code new software or modify existing software to add new features • Integrate existing software into new or modified systems or operating environments • Write or review software and system documentation • Serve as team lead at the level appropriate to the software development process being used on any particular project • Design or implement complex database or data repository interfaces/queries • Develop or implement algorithms to meet or exceed system performance and functional standards • Assist with developing and executing test procedures for software components • Develop software solutions by analyzing system performance standards, confer with users or system engineers; analyze systems flow, data usage and work processes; and investigate problem areas • Modify existing software to correct errors, to adapt to new hardware, or to improve its performance • Design, develop and modify software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design • Design or implement complex algorithms requiring adherence to strict timing, system resource, or interface constraints; Perform quality control on team products • Implement recommendations for improving documentation and software development process standards • Coordinate software system installation and monitor equipment functioning to ensure operational specifications are met WHO WE ARE The program is on fire for cyber. In support of our customer, members of the team are responsible for providing full lifecycle support including analysis, design, development, integration, testing, procurement, deployment, security, training and sustainment for collection and antenna systems. WHY JOIN US In this role you will have the opportunity to safeguard vital national security systems while advancing cutting edge cyber defense technologies. Our benefits are built to match the caliber of your work. Reliable, high-performing, and mission-ready. You'll enjoy world class resources, mentorship, continuous learning, competitive compensation, comprehensive benefits, and a supportive work life balance-all within a culture that values innovation, integrity, and collaboration. This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3000 payment! Code extrefer. Basic Qualifications: • Fourteen (14) years experience as a SWE in programs and contracts of similar scope, type, and complexity is required. Bachelor's degree in Computer Science or related discipline from an accredited college or university is required. Four (4) years of additional SWE experience on projects with similar software processes may be substituted for a bachelor's degree Candidate must possess active security clearance with a polygraph. Desired Skills: • C++ • Python • Kubernetes Clearance Level: TS/SCI w/Poly SP Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $150,800 - $265,880. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Software Engineering Type: Task Order/IDIQ Shift: First

Job ID: 712837BR Date posted: Apr. 08, 2026 Description:This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3,000 payment! code-extrefer WHAT WE'RE DOING Lockheed Martin, Rotary Mission Systems Cyber & Intelligence invites you to step up to one of today's most daunting challenges: the use of advanced electronics to undermine our way of life. As a cyber security professional at Lockheed Martin, you'll protect the networks that our citizens and the world depend upon each minute: Financial assets. Healthcare information. Critical infrastructure. Hazardous materials. The uninterrupted flow of energy that keeps modern life moving. Here, you'll work with cybersecurity experts on the forefront of threat protection and proactive prevention. In this fast-paced, real-world environment, you'll draw on all your education and experience as well as the resources of Lockheed Martin to keep the threats at bay. THE WORK In this role you will: • Analyze user requirements to derive software design and performance requirements • Design and code new software or modify existing software to add new features • Integrate existing software into new or modified systems or operating environments • Write or review software and system documentation • Serve as team lead at the level appropriate to the software development process being used on any particular project • Design or implement complex database or data repository interfaces/queries • Develop or implement algorithms to meet or exceed system performance and functional standards • Assist with developing and executing test procedures for software components • Develop software solutions by analyzing system performance standards, confer with users or system engineers; analyze systems flow, data usage and work processes; and investigate problem areas • Modify existing software to correct errors, to adapt to new hardware, or to improve its performance • Design, develop and modify software systems, using scientific analysis and mathematical models to predict and measure outcome and consequences of design • Design or implement complex algorithms requiring adherence to strict timing, system resource, or interface constraints; Perform quality control on team products • Implement recommendations for improving documentation and software development process standards • Coordinate software system installation and monitor equipment functioning to ensure operational specifications are met WHO WE ARE The program is on fire for cyber. In support of our customer, members of the team are responsible for providing full lifecycle support including analysis, design, development, integration, testing, procurement, deployment, security, training and sustainment for collection and antenna systems. WHY JOIN US In this role you will have the opportunity to safeguard vital national security systems while advancing cutting edge cyber defense technologies. Our benefits are built to match the caliber of your work. Reliable, high-performing, and mission-ready. You'll enjoy world class resources, mentorship, continuous learning, competitive compensation, comprehensive benefits, and a supportive work life balance-all within a culture that values innovation, integrity, and collaboration. This position is participating in our External Referral Program. If you know somebody who may be a fit, click here to submit a referral. If your referral is hired, you'll receive a $3000 payment! Code extrefer. Basic Qualifications: • Fourteen (14) years experience as a SWE in programs and contracts of similar scope, type, and complexity is required. Bachelor's degree in Computer Science or related discipline from an accredited college or university is required. Four (4) years of additional SWE experience on projects with similar software processes may be substituted for a bachelor's degree Candidate must possess active security clearance with a polygraph. Desired Skills: • C++ • Python • Kubernetes Clearance Level: TS/SCI w/Poly SP Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $150,800 - $265,880. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Experienced Professional Business Unit: RMS Relocation Available: Possible Career Area: Software Engineering Type: Task Order/IDIQ Shift: First

City/State Virginia Beach, VA Work Shift First (Days) Overview: Sentara is hiring for a Senior Data Scientist! This position is fully remote. Overview We are seeking a highly skilled and experienced Data Science ML Operations and Gen AI Engineer (or Senior) to join us and help advance our current and future work applying machine learning, deep learning, and NLP to deliver better healthcare. The Senior Data Scientist will leverage data to improve healthcare outcomes and drive data-driven decision-making. Leveraging expertise in statistical analysis and machine learning, this role will collaborate with cross-functional teams to solve complex healthcare challenges and enhance patient care. This role will directly contribute to advancing medical research, optimizing healthcare processes, and delivering innovative solutions in the healthcare industry. As a Senior ML Engineer on our team, you will play a crucial role in identifying gaps in our existing ML platform and architecting and building solutions to address those gaps. You will also collaborate with the AI team's ML Scientists and our partner data engineering and software development teams to bring ML AND Gen AI models to production and maintain their health and integrity while in production. Your expertise in machine learning and Gen AI, coupled with a strong background in software development, will be instrumental in driving the success of Sentara's AI/ML initiatives. Qualifications: • 5+ years building production software/ML systems, including 1+ years of experience with LLMs/GenAI. • Proficient in Python and one major DL/LLM stack (e.g., PyTorch/Transformers); experience with LangChain/LlamaIndex, vector DBs, and cloud (AWS/Azure/GCP). • Demonstrated delivery of RAG, prompt engineering, evaluation frameworks, and guardrails in production. • Strength in APIs, distributed systems, and ML Ops (K8s, CI/CD, monitoring). • Experience with EPIC health platform is highly preferred • Experience with ML platforms and ML Ops: Demonstrated experience in assessing and improving ML platforms, identifying gaps, and architecting solutions to address them. Strong familiarity with ML platform components such as data ingestion, preprocessing, feature stores, model training, deployment, and monitoring. • Experience with SQL and big data platforms such as Postgres, Redshift and Snowflake • Experience with Agile/Scrum methodology and best practices Preferred: • Previous work experience with Generative AI and ML Ops in healthcare EPIC environment • Understanding of use and implementation of Vector Databases • Kubernetes container orchestration experience Responsibilities • Responsible for design and development of production-grade Machine Learning ops and Gen AI solutions • Lead hands-on delivery of scalable GenAI solutions from problem framing prototyping evaluation production monitoring. • Build internal copilots/assistants (knowledge search, code/content generation) and client-facing products (conversational analytics, summarization, recommendations, workflow automation). • Design RAG pipelines, embedding strategies, vector search, and model orchestration; evaluate fine-tuning vs. prompt engineering. • Implement guardrails, safety filters, prompt/version management, latency/throughput optimizations, and cost controls. • ML platform and ML Ops: Identify areas that require improvements or additional functionalities and use your expertise in machine learning and software engineering to architect and develop solutions that fill gaps in our ML platform and development ecosystem. Analyze system performance, scalability, and reliability to pinpoint opportunities for enhancement. Develop tools and solutions that help the team build, deploy, and monitor AI/ML solutions efficiently. • System scalability and reliability: Optimize the scalability, performance, and reliability and AI Team solutions by implementing best practices and leveraging industry-standard technologies. Collaborate with infrastructure teams to ensure smooth integration and deployment of ML solutions. Design scalable and efficient systems that leverage the power of machine learning for enhanced performance and capabilities. • Data processing and workflow pipelines: Streamline data ingestion, preprocessing, feature engineering, and model training workflows to improve efficiency and reduce latency. Work with data engineering and data platform teams to design and implement robust data pipelines that support the AI team's needs. • Model deployment and monitoring: Evaluate and optimize model prototypes for real-world performance. Work with infrastructure and development teams to integrate ML models into production systems. Work closely with partner teams to communicate and understand technical requirements and challenges. • As part of Sentara's Data Science team you will be responsible for implementation and operationalization of AI/ML models. You will work with other machine learning engineers, data scientists, software engineers and platform engineers to ensure success of the AI/ML implementations. Specific responsibilities will include: • Apply software engineering rigor and best practices to machine learning, including AI/MLOPs, CI/CD, automation, etc. • Take offline models data scientists build and turn them into a real machine learning production system. Education Bachelor's Degree (Required) Certification/Licensure No specific certification or licensure requirements Experience Required to have 5+ years of experience as a Data Scientist with a strong focus on Azure and Microsoft Data Science, AI, and machine learning toolsets. Required to have strong problem-solving skills and the ability to tackle complex healthcare challenges using data-driven approaches. Can help the Data Science infrastructure building up, working with ML Ops team for model implementation, mentoring and developing junior staff. Required to have s trong proficiency in data analysis, data manipulation, and data visualization using Python. Required to have f amiliarity with healthcare-related datasets, medical terminologies, and electronic health records (EHR) data. Required to have knowledge of statistical techniques, hypothesis testing, and experimental design for healthcare research. Required to have s trong machine learning expertise: Proficient in machine learning algorithms, statistical modeling, and data analysis. Hands-on experience with standard ML frameworks (e.g., TensorFlow, PyTorch) and libraries (e.g., scikit-learn, XGBoost, TensorFlow, or Keras). Required to have solid understanding of data engineering principles, data structures, and algorithms. Proficient in Python and/or other programming languages commonly used in ML development. Required to have experience in technologies, frameworks and architecture like Java or Python, Angular, React, JSON, Application Servers, CI/CD is preferred. Required to have experience with one or more AI automations platforms like Kubeflow pipeline, MLFlow, Azure Pipeline, AWS Sage Maker Pipeline, Airflow, Jenkins, Spark, Hadoop, Kafka, Jira and GIT. We provide market-competitive compensation packages, inclusive of base pay, incentives, and benefits. The base pay rate for full-time employment is: $91,416.00 - $152,380.80. Additional compensation may be available for this role such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Benefits: Caring For Your Family and Your Career • Medical, Dental, Vision plans • Adoption, Fertility and Surrogacy Reimbursement up to $10,000 • Paid Time Off and Sick Leave • Paid Parental & Family Caregiver Leave • Emergency Backup Care • Long-Term, Short-Term Disability, and Critical Illness plans • Life Insurance • 401k/403B with Employer Match • Tuition Assistance - $5,250/year and discounted educational opportunities through Guild Education • Student Debt Pay Down - $10,000 • Reimbursement for certifications and free access to complete CEUs and professional development •Pet Insurance •Legal Resources Plan •Colleagues have the opportunity to earn an annual discretionary bonus ifestablished system and employee eligibility criteria is met. Sentara Health is an equal opportunity employer and prides itself on the diversity and inclusiveness of its close to an almost 30,000-member workforce. Diversity, inclusion, and belonging is a guiding principle of the organization to ensure its workforce reflects the communities it serves. In support of our mission "to improve health every day," this is a tobacco-free environment. For positions that are available as remote work, Sentara Health employs associates in the following states: Alabama, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Louisiana, Maine, Maryland, Minnesota, Nebraska, Nevada, New Hampshire, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-

Position Summary: The Project Manager (PM) is responsible for the management and delivery of projects in accordance with each project's client contract and to the expectations of PEC. This position is expected to manage the project scope, schedule, and cost while also assessing and managing risks and for client satisfaction. The Project Manager will coordinate and communicate with all appropriate project stakeholders, ensuring deliverables and milestones are on time and within budget. Duties and Responsibilities: Competent to make all business decisions on projects from opportunity identification through project completion with minimal guidance or oversight. Anticipate and productively resolve discrepancies between client expectations and contracted scope Manage project scope, cost, and schedule for the planning, execution, and delivery of projects on-time and within budget Lead project teams throughout pre-contract phase. Collaborating with internal and external team members to develop fee proposals and when needed, establish project budgets. Thereafter preparing proposed contracts and sub-consultant contracts as appropriate Responsible for assembling the project team with the approval of each project team member's supervisor Manage the flow of project work for all disciplines Manage the application of resources to the project Provide direction to project team for all project activities to keep them on schedule Update project timeline and adjust scheduling and provide regular project updates to the project team and others as appropriate Ensure Quality Control processes are followed, performed, and documented Identify risk (client service risks, contract risks, technical risks, staffing risks, etc.), appropriately communicates risk and risk management strategies internally, and diplomatically and effectively navigate risk management with clients and project teams Lead project teams through forecasting estimates to complete and assessing work progress Communicate effectively with the project team, Market VP, and other internal stakeholders as necessary to accomplish the project goals and the expectations of PEC Effective and appropriate client communication and client management Adhere to all adopted business practices and quality procedures Represent themselves and PEC in a professional, strategic, and courteous manner Project assignments and responsibilities may be added at the company's discretion. Knowledge, skills and abilities: Considerable knowledge and understanding of consulting design and construction standards and practices Strong skills using project management tools and systems, including but not limited to scheduling software, including Microsoft Project Proficient Microsoft Office and Bluebeam skills Familiar with CADD and REVIT software applications and processes Proven experience working in collaborative environments using Microsoft Teams Ability to effectively communicate both verbally and in writing with internal and external project teams, the client and other stakeholders Ability to work independently and as part of a team Strong leadership and interpersonal skills, with the ability to motivate and guide others, build effective and cohesive relationships Proven experience in planning, organizing, prioritizing, coordinating, training, supporting, assigning and evaluating the work of a project team Education and Experience: Bachelor's degree in engineering or related field from ABET Accredited University required Minimum two (2) years' experience as a discipline/task lead required Minimum two (2) years' experience in Project Management or related experience/field preferred Minimum five (5) years' experience in Engineering Design preferred License and Certification: Licensure by the applicable State Board of Technical Professions preferred Work Environment: PEC values working efficiently and collaboratively for quality and productive work. The work environment is business casual, friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted within an office setting with frequent sitting, reaching and manipulation of objects, tools and/or controls. The position requires mobility. Duties involved require moving materials that weigh up to 10 pounds on a regular basis and up to 25 pounds on an occasional basis. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. At times, bending, reaching, standing, and walking may be required. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): N/A HP21 PEC is an AA/EEO/Veteran/Disabled employer. PIb654d7c3b1-