Job Description Job Description Job Summary: The Senior Electrical Systems Engineer leads the development of battery system electrical requirements, architecture, and analysis, using an interdisciplinary approach. This role drives early integration of electrical systems, defines system architecture and schematics, and supports them throughout the full project lifecycle. It involves identifying technical risks, contributing to design development, and ensuring system performance through testing and analysis. The engineer collaborates closely with cross-functional teams-including BMS, design, manufacturing, and validation-to support simulation, troubleshooting, and system optimization across battery pack and embedded systems. Responsibilities: Apply advanced expertise to diagnose, resolve, and drive solutions for complex battery electrical systems engineering challenges. Derive and refine electrical sub system requirements and design guideline principles. Develop electrical system architecture and schematics and allocate to requirements. Develop external interface specifications for electrical interfaces across systems. Lead and effectively communicate cross functional electrical system engineering meetings. Drive resolution of electrical system issues between customers and design engineers. Support the Lead Systems Engineer on electrical engineering topics. Support Design Release Engineers during electrical component design reviews for Electromagnetic Compatibility (EMC) robustness, grounding/bonding strategy, shielding, harness routing, High Voltage / Low Voltage (HV/LV) separation, connector selection, isolation, and system integration. Analyze electrical system failure modes in Design Failure Mode and Effects Analysis (DFMEA) and support functional safety analysis. Develop electrical sub system integration test plans and drive prototype testing and analysis for EMC, communication, HV/LV power distribution, and BMS peripheral systems (contactors, pre-charge, voltage/temperature/current/isolation sensors), etc. Collaborate with Validation Engineers, design engineers, suppliers, and external test labs to resolve Power, Control, Communication, and EMC-related design and compliance issues. Support analysis of BMS schematics, layouts, hardware, controls, communications, and Worst Case Circuit Analysis (WCCA). Track and prioritize top technical risks and known electrical system issues. Troubleshoot battery pack issues and update requirements and engineering guidelines from lessons learned. Drive model based analysis of the electrical battery system with Computer-Aided Design (CAD), Simulation Program with Integrated Circuit Emphasis (SPICE), and Computer-Aided Engineering (CAE). Support Validation with planning, testing, root-cause analysis, and corrective actions. Support electrical inspection requirements for end of line testing. Adhere to federal and state regulations. Adhere to all company policies, processes, and procedures. Perform other duties as assigned. Maintain predictable and reliable attendance. Position Qualifications: Bachelor's degree in Electrical Engineering, or an equivalent field. Master's degree preferred. Minimum of seven (7) years of experience in automotive or similar electrical systems including HV/LV Battery Systems, BMS, Battery Disconnect Units (BDU), Power Distribution Units (PDU), or Controller Area Network (CAN) communications. Experience with DFMEA, Process Failure Mode and Effects Analysis (PFMEA), Design Verification Plan and Report (DVP&R), and the product design life cycle. Experience working in a lab environment working with multimeters, oscilloscopes, HiPot testers, Inductance-Capacitance-Resistance (LCR) meters, Controller Area Network analysis tools (CANalyzer/CANoe), and Data Acquisition systems (DAQs). Experience with WCCA, SPICE, CAD/CAE, and electrical design tools. Preferred experience with Ansys, Mathcad, MATLAB, Simulink, Simscape, LTspice, and Altium. Preferred experience with requirements management tools and systems engineering methodologies including Jama, DOORS, Sparx Enterprise Architect, Model Based Systems Engineering (MBSE), and SysML. Preferred experience with AI (Copilot, ChatGPT, Claude). Preferred experience handling high voltage lithium ion battery systems. Key Competencies: Focuses on Quality: Drives work results with quality focus in actions and results. Continual Improvement: Displays a consistent orientation toward producing the highest quality products or services, while keeping a focus on sustainability. Constantly looking for incremental improvements in work and processes and results. Decision Making & Analysis: Makes sound decisions based upon a mixture of data-driven analysis, expertise, experience and judgment; collects relevant information, seeking input from others, and identifies connections and/or root causes of problems. Takes Initiative: Exhibits strong drive for results and success; conveys a sense of urgency and drives issues to closure; persists despite obstacles and opposition. Delivers Results: Achievement-oriented, feeling a sense of urgency to reach goals on time, if not before. Partnership Development: Establishes productive and effective relationships with both internal and external stakeholders. Physical Requirements / Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Prolonged periods sitting at a desk and working on a computer. Constantly operates a computer and other office equipment. Ability to adjust focus, especially due to concentration on a computer screen. May need to lift and carry up to 30 pounds and/or position the body to reach items on the floor/below knee level or reach overhead. The person in this position needs to occasionally move about in industrial environments, and on uneven terrain. Works in a temperature-controlled office environment, with occasional work in outdoor weather conditions, and in industrial environments. The noise level in the work environment can be moderately loud. Ability to travel and work flexible hours as needed (less than 10% travel on average). Why Join Us American Battery Solutions (ABS) provides comprehensive 100% employer paid benefit plans to employees and their family, competitive salary and retirement program. ABS employs a diverse and inclusive workforce. Benefits Overview Paid time off includes 3 weeks vacation, up to 72 hours sick, 15 holidays, and parental leave. 100% company-paid medical, dental, vision, short-term disability, long-term disability, and life insurance. Flexible Spending Account (FSA) and Health Savings Account (HSA) offerings. Company provided 401K savings plan with immediately vested matching contributions to help you save for retirement. Voluntary benefits offerings. Tuition assistance. Employee Referral Program. Employee development and career growth opportunities. About Us American Battery Solutions Inc. ("ABS") is a manufacturer of advanced batteries for commercial, fleet, and industrial on- and off-road vehicles. Located in the heart of the U.S. automotive region with facilities in Michigan and Ohio. In 2023, ABS was acquired by Komatsu, a world leader in construction, mining, forestry, and industrial heavy equipment in support of Komatsu's 2050 carbon neutrality goal. ABS continues to operate as an independent entity serving Komatsu applications while continuing to expand and grow our core commercial, fleet and industrial business. As we have grown, ABS has assembled a world-class team of dedicated and experienced engineers. This team is equipped with a deep understanding of high-voltage, automotive-grade battery systems from concept development and prototyping, to testing and validation, to high-volume production. We pride ourselves on developing a diverse team of next generation battery experts. The Location - Lake Orion American Battery Solutions Headquarters and Innovation Center is located in the heart of South-East Michigan in Orion Township. Orion Township is a Pure Michigan Trail Town that has a long-standing dedication to enhancing trails and pathways in its community, which is home to the Polly Ann Trail, Paint Creek Trail, and Iron Belle Trail. The township boasts more than 50 miles of trails. Southeast Michigan also boasts some of the best eating around! Whether your interest is in furthering your education, enjoying one of the many regional sporting events, or enjoying the vast outdoors that Michigan has to offer, you'll be at the center of it here! AMERICAN BATTERY SOLUTIONS IS AN EQUAL OPPORTUNITY EMPLOYER.
06/27/2026
Full time
Job Description Job Description Job Summary: The Senior Electrical Systems Engineer leads the development of battery system electrical requirements, architecture, and analysis, using an interdisciplinary approach. This role drives early integration of electrical systems, defines system architecture and schematics, and supports them throughout the full project lifecycle. It involves identifying technical risks, contributing to design development, and ensuring system performance through testing and analysis. The engineer collaborates closely with cross-functional teams-including BMS, design, manufacturing, and validation-to support simulation, troubleshooting, and system optimization across battery pack and embedded systems. Responsibilities: Apply advanced expertise to diagnose, resolve, and drive solutions for complex battery electrical systems engineering challenges. Derive and refine electrical sub system requirements and design guideline principles. Develop electrical system architecture and schematics and allocate to requirements. Develop external interface specifications for electrical interfaces across systems. Lead and effectively communicate cross functional electrical system engineering meetings. Drive resolution of electrical system issues between customers and design engineers. Support the Lead Systems Engineer on electrical engineering topics. Support Design Release Engineers during electrical component design reviews for Electromagnetic Compatibility (EMC) robustness, grounding/bonding strategy, shielding, harness routing, High Voltage / Low Voltage (HV/LV) separation, connector selection, isolation, and system integration. Analyze electrical system failure modes in Design Failure Mode and Effects Analysis (DFMEA) and support functional safety analysis. Develop electrical sub system integration test plans and drive prototype testing and analysis for EMC, communication, HV/LV power distribution, and BMS peripheral systems (contactors, pre-charge, voltage/temperature/current/isolation sensors), etc. Collaborate with Validation Engineers, design engineers, suppliers, and external test labs to resolve Power, Control, Communication, and EMC-related design and compliance issues. Support analysis of BMS schematics, layouts, hardware, controls, communications, and Worst Case Circuit Analysis (WCCA). Track and prioritize top technical risks and known electrical system issues. Troubleshoot battery pack issues and update requirements and engineering guidelines from lessons learned. Drive model based analysis of the electrical battery system with Computer-Aided Design (CAD), Simulation Program with Integrated Circuit Emphasis (SPICE), and Computer-Aided Engineering (CAE). Support Validation with planning, testing, root-cause analysis, and corrective actions. Support electrical inspection requirements for end of line testing. Adhere to federal and state regulations. Adhere to all company policies, processes, and procedures. Perform other duties as assigned. Maintain predictable and reliable attendance. Position Qualifications: Bachelor's degree in Electrical Engineering, or an equivalent field. Master's degree preferred. Minimum of seven (7) years of experience in automotive or similar electrical systems including HV/LV Battery Systems, BMS, Battery Disconnect Units (BDU), Power Distribution Units (PDU), or Controller Area Network (CAN) communications. Experience with DFMEA, Process Failure Mode and Effects Analysis (PFMEA), Design Verification Plan and Report (DVP&R), and the product design life cycle. Experience working in a lab environment working with multimeters, oscilloscopes, HiPot testers, Inductance-Capacitance-Resistance (LCR) meters, Controller Area Network analysis tools (CANalyzer/CANoe), and Data Acquisition systems (DAQs). Experience with WCCA, SPICE, CAD/CAE, and electrical design tools. Preferred experience with Ansys, Mathcad, MATLAB, Simulink, Simscape, LTspice, and Altium. Preferred experience with requirements management tools and systems engineering methodologies including Jama, DOORS, Sparx Enterprise Architect, Model Based Systems Engineering (MBSE), and SysML. Preferred experience with AI (Copilot, ChatGPT, Claude). Preferred experience handling high voltage lithium ion battery systems. Key Competencies: Focuses on Quality: Drives work results with quality focus in actions and results. Continual Improvement: Displays a consistent orientation toward producing the highest quality products or services, while keeping a focus on sustainability. Constantly looking for incremental improvements in work and processes and results. Decision Making & Analysis: Makes sound decisions based upon a mixture of data-driven analysis, expertise, experience and judgment; collects relevant information, seeking input from others, and identifies connections and/or root causes of problems. Takes Initiative: Exhibits strong drive for results and success; conveys a sense of urgency and drives issues to closure; persists despite obstacles and opposition. Delivers Results: Achievement-oriented, feeling a sense of urgency to reach goals on time, if not before. Partnership Development: Establishes productive and effective relationships with both internal and external stakeholders. Physical Requirements / Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Prolonged periods sitting at a desk and working on a computer. Constantly operates a computer and other office equipment. Ability to adjust focus, especially due to concentration on a computer screen. May need to lift and carry up to 30 pounds and/or position the body to reach items on the floor/below knee level or reach overhead. The person in this position needs to occasionally move about in industrial environments, and on uneven terrain. Works in a temperature-controlled office environment, with occasional work in outdoor weather conditions, and in industrial environments. The noise level in the work environment can be moderately loud. Ability to travel and work flexible hours as needed (less than 10% travel on average). Why Join Us American Battery Solutions (ABS) provides comprehensive 100% employer paid benefit plans to employees and their family, competitive salary and retirement program. ABS employs a diverse and inclusive workforce. Benefits Overview Paid time off includes 3 weeks vacation, up to 72 hours sick, 15 holidays, and parental leave. 100% company-paid medical, dental, vision, short-term disability, long-term disability, and life insurance. Flexible Spending Account (FSA) and Health Savings Account (HSA) offerings. Company provided 401K savings plan with immediately vested matching contributions to help you save for retirement. Voluntary benefits offerings. Tuition assistance. Employee Referral Program. Employee development and career growth opportunities. About Us American Battery Solutions Inc. ("ABS") is a manufacturer of advanced batteries for commercial, fleet, and industrial on- and off-road vehicles. Located in the heart of the U.S. automotive region with facilities in Michigan and Ohio. In 2023, ABS was acquired by Komatsu, a world leader in construction, mining, forestry, and industrial heavy equipment in support of Komatsu's 2050 carbon neutrality goal. ABS continues to operate as an independent entity serving Komatsu applications while continuing to expand and grow our core commercial, fleet and industrial business. As we have grown, ABS has assembled a world-class team of dedicated and experienced engineers. This team is equipped with a deep understanding of high-voltage, automotive-grade battery systems from concept development and prototyping, to testing and validation, to high-volume production. We pride ourselves on developing a diverse team of next generation battery experts. The Location - Lake Orion American Battery Solutions Headquarters and Innovation Center is located in the heart of South-East Michigan in Orion Township. Orion Township is a Pure Michigan Trail Town that has a long-standing dedication to enhancing trails and pathways in its community, which is home to the Polly Ann Trail, Paint Creek Trail, and Iron Belle Trail. The township boasts more than 50 miles of trails. Southeast Michigan also boasts some of the best eating around! Whether your interest is in furthering your education, enjoying one of the many regional sporting events, or enjoying the vast outdoors that Michigan has to offer, you'll be at the center of it here! AMERICAN BATTERY SOLUTIONS IS AN EQUAL OPPORTUNITY EMPLOYER.
Date Posted: In order to make an application, simply read through the following job description and make sure to attach relevant documents. 2026-04-09 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. With more than 100 years of engineering excellence, we solve complex, meaningful problems that create a safer, more secure world. The Effectors Optics Department is seeking a Senior Electro-Optical Integration & Test Engineer to join a multidisciplinary team supporting development, qualification, and production of advanced EO systems. This role focuses on imaging sensor subsystems, hardware integration, verification, and production transition across a diverse portfolio of EO products. This position is central to the successful integration and validation of electro-optical systems. It bridges optics, electronics, mechanical, and software disciplines to ensure subsystems function cohesively, performance requirements are verified, and hardware transitions efficiently from development to production. What You Will Do Lead optical and electro-mechanical alignment and verification of EO imaging subsystems Integrate detectors, optics, electronics, and firmware into functioning hardware assemblies Develop and execute system-level test plans for development and production programs Design and implement automated test processes and data acquisition tools Analyze test data and develop models to support performance verification and root-cause investigations Design and maintain EO subsystem test fixtures and support equipment Troubleshoot hardware issues at the component and system level Support production activities including documentation, process improvements, and yield enhancement Participate in technical reviews and continuous improvement initiatives Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience Experience in electro-optical systems, imaging systems, system integration, or hardware test Experience with system-level integration and verification of complex hardware Experience with test data analysis and interpretation Qualifications We Prefer Advanced degree in Optics, Electrical Engineering, Physics, or related STEM discipline Experience with imaging systems (IR, visible, or multi-spectral) Experience integrating EO hardware and embedded electronics Proficiency in MATLAB, Python, or C++ for data analysis and test automation Experience developing automated test scripts and data acquisition systems Hands-on experience with laboratory measurement equipment and environmental test setups Experience supporting products transitioning from development to production What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance available! Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. xibtplm All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
06/27/2026
Full time
Date Posted: In order to make an application, simply read through the following job description and make sure to attach relevant documents. 2026-04-09 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. With more than 100 years of engineering excellence, we solve complex, meaningful problems that create a safer, more secure world. The Effectors Optics Department is seeking a Senior Electro-Optical Integration & Test Engineer to join a multidisciplinary team supporting development, qualification, and production of advanced EO systems. This role focuses on imaging sensor subsystems, hardware integration, verification, and production transition across a diverse portfolio of EO products. This position is central to the successful integration and validation of electro-optical systems. It bridges optics, electronics, mechanical, and software disciplines to ensure subsystems function cohesively, performance requirements are verified, and hardware transitions efficiently from development to production. What You Will Do Lead optical and electro-mechanical alignment and verification of EO imaging subsystems Integrate detectors, optics, electronics, and firmware into functioning hardware assemblies Develop and execute system-level test plans for development and production programs Design and implement automated test processes and data acquisition tools Analyze test data and develop models to support performance verification and root-cause investigations Design and maintain EO subsystem test fixtures and support equipment Troubleshoot hardware issues at the component and system level Support production activities including documentation, process improvements, and yield enhancement Participate in technical reviews and continuous improvement initiatives Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience Experience in electro-optical systems, imaging systems, system integration, or hardware test Experience with system-level integration and verification of complex hardware Experience with test data analysis and interpretation Qualifications We Prefer Advanced degree in Optics, Electrical Engineering, Physics, or related STEM discipline Experience with imaging systems (IR, visible, or multi-spectral) Experience integrating EO hardware and embedded electronics Proficiency in MATLAB, Python, or C++ for data analysis and test automation Experience developing automated test scripts and data acquisition systems Hands-on experience with laboratory measurement equipment and environmental test setups Experience supporting products transitioning from development to production What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance available! Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. xibtplm All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Date Posted: In order to make an application, simply read through the following job description and make sure to attach relevant documents. 2026-04-09 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. With more than 100 years of engineering excellence, we solve complex, meaningful problems that create a safer, more secure world. The Effectors Optics Department is seeking a Senior Electro-Optical Integration & Test Engineer to join a multidisciplinary team supporting development, qualification, and production of advanced EO systems. This role focuses on imaging sensor subsystems, hardware integration, verification, and production transition across a diverse portfolio of EO products. This position is central to the successful integration and validation of electro-optical systems. It bridges optics, electronics, mechanical, and software disciplines to ensure subsystems function cohesively, performance requirements are verified, and hardware transitions efficiently from development to production. What You Will Do Lead optical and electro-mechanical alignment and verification of EO imaging subsystems Integrate detectors, optics, electronics, and firmware into functioning hardware assemblies Develop and execute system-level test plans for development and production programs Design and implement automated test processes and data acquisition tools Analyze test data and develop models to support performance verification and root-cause investigations Design and maintain EO subsystem test fixtures and support equipment Troubleshoot hardware issues at the component and system level Support production activities including documentation, process improvements, and yield enhancement Participate in technical reviews and continuous improvement initiatives Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience Experience in electro-optical systems, imaging systems, system integration, or hardware test Experience with system-level integration and verification of complex hardware Experience with test data analysis and interpretation Qualifications We Prefer Advanced degree in Optics, Electrical Engineering, Physics, or related STEM discipline Experience with imaging systems (IR, visible, or multi-spectral) Experience integrating EO hardware and embedded electronics Proficiency in MATLAB, Python, or C++ for data analysis and test automation Experience developing automated test scripts and data acquisition systems Hands-on experience with laboratory measurement equipment and environmental test setups Experience supporting products transitioning from development to production What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance available! Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. xibtplm All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
06/27/2026
Full time
Date Posted: In order to make an application, simply read through the following job description and make sure to attach relevant documents. 2026-04-09 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. With more than 100 years of engineering excellence, we solve complex, meaningful problems that create a safer, more secure world. The Effectors Optics Department is seeking a Senior Electro-Optical Integration & Test Engineer to join a multidisciplinary team supporting development, qualification, and production of advanced EO systems. This role focuses on imaging sensor subsystems, hardware integration, verification, and production transition across a diverse portfolio of EO products. This position is central to the successful integration and validation of electro-optical systems. It bridges optics, electronics, mechanical, and software disciplines to ensure subsystems function cohesively, performance requirements are verified, and hardware transitions efficiently from development to production. What You Will Do Lead optical and electro-mechanical alignment and verification of EO imaging subsystems Integrate detectors, optics, electronics, and firmware into functioning hardware assemblies Develop and execute system-level test plans for development and production programs Design and implement automated test processes and data acquisition tools Analyze test data and develop models to support performance verification and root-cause investigations Design and maintain EO subsystem test fixtures and support equipment Troubleshoot hardware issues at the component and system level Support production activities including documentation, process improvements, and yield enhancement Participate in technical reviews and continuous improvement initiatives Qualifications You Must Have Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years' experience Experience in electro-optical systems, imaging systems, system integration, or hardware test Experience with system-level integration and verification of complex hardware Experience with test data analysis and interpretation Qualifications We Prefer Advanced degree in Optics, Electrical Engineering, Physics, or related STEM discipline Experience with imaging systems (IR, visible, or multi-spectral) Experience integrating EO hardware and embedded electronics Proficiency in MATLAB, Python, or C++ for data analysis and test automation Experience developing automated test scripts and data acquisition systems Hands-on experience with laboratory measurement equipment and environmental test setups Experience supporting products transitioning from development to production What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance available! Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. xibtplm All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
06/27/2026
Full time
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
06/27/2026
Full time
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
Job Description Job Description Position 1 Sr.ASIC designer: This Senior Architect position will be responsible for guiding and developing ASICs for applications within Magnetic Resonance (MR) systems. The successful candidate will interface with ASIC simulation & design teams, and Hardware Subsystem teams to help deliver mixed-signal and digital ASIC design solutions. Essential Responsibilities Duties include (but are not limited to): • Guide ASIC development leveraging experience in mixed-signal (RF ADC/DAC & associated demodulation, digital filtering, etc functional blocks) and digital ASIC design • Familiarity with System Verilog and VHDL code to understand FPGA-based designs; familiar with transitioning FPGA solutions to ASIC • Scope and define ASIC test and verification plans, ensuring test coverage & debugging are key parts of initial designs. • Support verification using UVM or equivalent industry standard methodology • Write detailed functional specifications that document newly created designs and support product introduction. • Provide technical support to team throughout product development and implementation process. • Model, build, test, and modify product prototypes using working models or theoretical models constructed with simulation. • Provide input requirements & definition to firmware team to develop low-level drivers for communication links. • Select hardware and material, assuring compliance with specifications and product requirements. • Engaging in all phases of new product introduction: concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support. • Update knowledge and skills in order to keep up with rapid advancements in ASIC/mixed-signal processes & technologies. • Identifying and developing new opportunities to leverage Strategic Sourcing objectives and Common Technology initiatives in the MR product line. Qualifications/Requirements BS in Electrical Engineering or similar with at least 10 years mixed signal ASIC design experience. Experience in full cycle mixed-signal ASIC development & realization, including understanding of all involved tasks to drive a design to tape-out Familiarity with analog ASIC design tools (Synopsys, Cadence, etc). Demonstrated experience in digital ASIC (System Verilog/VHDL) design and simulation tools (QuestaSim, Xcelium, etc) Demonstrated experience in MATLAB or equivalent simulation/modeling tool Working knowledge of project management processes and procedures. Experience with typical related electrical test equipment such as oscilloscopes, logic analyzers Position 2 Lead Wireless Engineer This Wireless Electrical Engineer position will primarily be responsible for the development of wireless modules and interfaces implemented within a Magnetic Resonance (MR) system. The candidate will leverage knowledge of industry standard wireless protocols, digital communication standards, circuit board design process to ensure quality design output. Essential Responsibilities • Assess commercially available wireless solutions for implementation within MR designs, with focus on link reliability, power, and platforming/lifecycle. • Define and execute testing to evaluate wireless concepts in challenging RF environments. • Drive schematic capture for circuit boards implementing associated wireless designs and high speed interfaces. • Write detailed functional specifications that document newly created designs and support product introduction. • Lend technical expertise to Installed Base teams to support design fixes and customer Escalations. • Engaging in all phases of new product introduction: concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support. Qualifications/Requirements 1. BS in Electrical Engineering with 5 years relevant industry experience, 3+ years wireless / RF experience 2. Experience and knowledge in the area of digital design and control 3. Wireless test equipment: protocol analyzer, spectrum analyzer etc 4. Working knowledge of project management processes and procedures. 5. Experience with typical electrical test equipment such as oscilloscopes 6. Working knowledge of PWA board bring-up and system integration experience Position 3 Firmware Embedded Linux Engineer Work closely with systems and hardware teams on requirements gathering and capture. Interact with global software and hardware teams to ensure software platform consistency across all MR platforms. Develop software which meets rigorous quality, reliability, performance, and testability requirements. Work closely with architects and team leads on design and architectural improvements. Perform code and design reviews when appropriate. Use Scaled Agile Framework to implement software. Support planning and execution through user stories to meet commitment made by scrum team. Qualifications/Requirements: Bachelor's degree, or foreign degree equivalent, in Computer Science, Electrical Engineering or related computer field. A minimum of 3 years of experience working with embedded Linux (Yocto or similar) including OS customization and developing kernel modules. A minimum of 5 years of experience developing object oriented (OO) software leveraging object oriented design methodology. A minimum of 5 years of experience with C++ software development. Familiarity using standard tools for embedded software development such as emulators, debuggers, analyzers.
06/26/2026
Full time
Job Description Job Description Position 1 Sr.ASIC designer: This Senior Architect position will be responsible for guiding and developing ASICs for applications within Magnetic Resonance (MR) systems. The successful candidate will interface with ASIC simulation & design teams, and Hardware Subsystem teams to help deliver mixed-signal and digital ASIC design solutions. Essential Responsibilities Duties include (but are not limited to): • Guide ASIC development leveraging experience in mixed-signal (RF ADC/DAC & associated demodulation, digital filtering, etc functional blocks) and digital ASIC design • Familiarity with System Verilog and VHDL code to understand FPGA-based designs; familiar with transitioning FPGA solutions to ASIC • Scope and define ASIC test and verification plans, ensuring test coverage & debugging are key parts of initial designs. • Support verification using UVM or equivalent industry standard methodology • Write detailed functional specifications that document newly created designs and support product introduction. • Provide technical support to team throughout product development and implementation process. • Model, build, test, and modify product prototypes using working models or theoretical models constructed with simulation. • Provide input requirements & definition to firmware team to develop low-level drivers for communication links. • Select hardware and material, assuring compliance with specifications and product requirements. • Engaging in all phases of new product introduction: concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support. • Update knowledge and skills in order to keep up with rapid advancements in ASIC/mixed-signal processes & technologies. • Identifying and developing new opportunities to leverage Strategic Sourcing objectives and Common Technology initiatives in the MR product line. Qualifications/Requirements BS in Electrical Engineering or similar with at least 10 years mixed signal ASIC design experience. Experience in full cycle mixed-signal ASIC development & realization, including understanding of all involved tasks to drive a design to tape-out Familiarity with analog ASIC design tools (Synopsys, Cadence, etc). Demonstrated experience in digital ASIC (System Verilog/VHDL) design and simulation tools (QuestaSim, Xcelium, etc) Demonstrated experience in MATLAB or equivalent simulation/modeling tool Working knowledge of project management processes and procedures. Experience with typical related electrical test equipment such as oscilloscopes, logic analyzers Position 2 Lead Wireless Engineer This Wireless Electrical Engineer position will primarily be responsible for the development of wireless modules and interfaces implemented within a Magnetic Resonance (MR) system. The candidate will leverage knowledge of industry standard wireless protocols, digital communication standards, circuit board design process to ensure quality design output. Essential Responsibilities • Assess commercially available wireless solutions for implementation within MR designs, with focus on link reliability, power, and platforming/lifecycle. • Define and execute testing to evaluate wireless concepts in challenging RF environments. • Drive schematic capture for circuit boards implementing associated wireless designs and high speed interfaces. • Write detailed functional specifications that document newly created designs and support product introduction. • Lend technical expertise to Installed Base teams to support design fixes and customer Escalations. • Engaging in all phases of new product introduction: concept, architecture, documentation, design, prototype, test, supplier interfaces, manufacturing introduction and service support. Qualifications/Requirements 1. BS in Electrical Engineering with 5 years relevant industry experience, 3+ years wireless / RF experience 2. Experience and knowledge in the area of digital design and control 3. Wireless test equipment: protocol analyzer, spectrum analyzer etc 4. Working knowledge of project management processes and procedures. 5. Experience with typical electrical test equipment such as oscilloscopes 6. Working knowledge of PWA board bring-up and system integration experience Position 3 Firmware Embedded Linux Engineer Work closely with systems and hardware teams on requirements gathering and capture. Interact with global software and hardware teams to ensure software platform consistency across all MR platforms. Develop software which meets rigorous quality, reliability, performance, and testability requirements. Work closely with architects and team leads on design and architectural improvements. Perform code and design reviews when appropriate. Use Scaled Agile Framework to implement software. Support planning and execution through user stories to meet commitment made by scrum team. Qualifications/Requirements: Bachelor's degree, or foreign degree equivalent, in Computer Science, Electrical Engineering or related computer field. A minimum of 3 years of experience working with embedded Linux (Yocto or similar) including OS customization and developing kernel modules. A minimum of 5 years of experience developing object oriented (OO) software leveraging object oriented design methodology. A minimum of 5 years of experience with C++ software development. Familiarity using standard tools for embedded software development such as emulators, debuggers, analyzers.
Job Description Job Title: Senior Controls System Engineer Working Pattern: Full-time Working location: Indianapolis, IN Rolls-Royce is looking for a Senior Control System Engineer to join our growing team. This is an exciting opportunity to work on flagship Rolls-Royce programs and play a vital role in solving some of the most complex and interesting technological challenges in the industry while being part of a global, multi-disciplinary team. As a Senior Control System Engineer, you will be the owner of assigned control system functions and interfaces. You will be responsible for providing technical guidance, counsel, and direction to a small team of engineers to ensure technical outcomes are delivered to appropriate standards and quality while working with a global engineering community to identify areas for collaboration and knowledge exchange. You will support full life cycle development and mentor junior engineers on processes, tools, and technical solutions. In this role, you will have the opportunity to travel up to 20% between Rolls-Royce sites and up to 10% other travel. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing With this attractive opportunity you will get a chance to: Collaborate with other teams and customers to develop electrical, electronics and mechatronics control system requirements, design and verification work products for safety critical applications as per ARP4754A and appropriate guidance within DO-178C Work with a cross-functional team to establish the highest standards of technical capability, quality, professionalism, and teamwork Provide and support engineering and process guidance, training and, create documentation Review engineering work products for technical documentation, quality, completeness Resolve complex problems through the application of acquired technical experience and knowledge Develop and communicate complex technical ideas and information in a concise and logical way Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Bachelor's degree in Aerospace, Mechanical, Electrical or Computer Engineering with 2+ years of product development engineering experience, OR Master's degree in in Aerospace, Mechanical, Electrical or Computer Engineering, OR PhD in degree in in Aerospace, Electrical, Mechanical or Computer Engineering Experience with requirements management In order to be eligible for consideration, you must be a U.S. Citizen Preferred Requirements: 5+ years of product development engineering experience Application of agile development methods to deliver engineering work products Experience with military qualification of airborne systems Experience with FAA certification Gas turbine engine, propulsion, or electrical control system experience Demonstrated experience with control system design and analysis tools Development of model-based systems with digital engineering toolsets (MATLAB, Simulink and/or similar) Knowledge of systems engineering, and robust design tools and techniques coupled with the latest model-centric development approaches Experience with Cameo Systems Modeler (MagicDraw) or similar SysML modelling software What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Relocation assistance is available for this position. Closing date: July 31st, 2026 Job Category Software Systems Job Posting Date 23 Jun 2026; 00:06 Pay Range $90,985 - $ 147,850-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.
06/26/2026
Full time
Job Description Job Title: Senior Controls System Engineer Working Pattern: Full-time Working location: Indianapolis, IN Rolls-Royce is looking for a Senior Control System Engineer to join our growing team. This is an exciting opportunity to work on flagship Rolls-Royce programs and play a vital role in solving some of the most complex and interesting technological challenges in the industry while being part of a global, multi-disciplinary team. As a Senior Control System Engineer, you will be the owner of assigned control system functions and interfaces. You will be responsible for providing technical guidance, counsel, and direction to a small team of engineers to ensure technical outcomes are delivered to appropriate standards and quality while working with a global engineering community to identify areas for collaboration and knowledge exchange. You will support full life cycle development and mentor junior engineers on processes, tools, and technical solutions. In this role, you will have the opportunity to travel up to 20% between Rolls-Royce sites and up to 10% other travel. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. Rolls-Royce has been recognized as the top employer in the Engineering & Manufacturing category on the prestigious Forbes Top Employers for Engineers list for 2025. This ranking highlights our commitment to innovation, employee development, and fostering a collaborative environment where engineers can thrive. Be part of a team that sets the industry standard and drives groundbreaking solutions. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. What you will be doing With this attractive opportunity you will get a chance to: Collaborate with other teams and customers to develop electrical, electronics and mechatronics control system requirements, design and verification work products for safety critical applications as per ARP4754A and appropriate guidance within DO-178C Work with a cross-functional team to establish the highest standards of technical capability, quality, professionalism, and teamwork Provide and support engineering and process guidance, training and, create documentation Review engineering work products for technical documentation, quality, completeness Resolve complex problems through the application of acquired technical experience and knowledge Develop and communicate complex technical ideas and information in a concise and logical way Who we're looking for: At Rolls-Royce we put safety first, do the right thing, keep it simple and make a difference. These principles form the behaviours that guide us and are an essential component of our assessment process. They are the fundamental qualities that we seek for all roles. Basic Requirements: Bachelor's degree in Aerospace, Mechanical, Electrical or Computer Engineering with 2+ years of product development engineering experience, OR Master's degree in in Aerospace, Mechanical, Electrical or Computer Engineering, OR PhD in degree in in Aerospace, Electrical, Mechanical or Computer Engineering Experience with requirements management In order to be eligible for consideration, you must be a U.S. Citizen Preferred Requirements: 5+ years of product development engineering experience Application of agile development methods to deliver engineering work products Experience with military qualification of airborne systems Experience with FAA certification Gas turbine engine, propulsion, or electrical control system experience Demonstrated experience with control system design and analysis tools Development of model-based systems with digital engineering toolsets (MATLAB, Simulink and/or similar) Knowledge of systems engineering, and robust design tools and techniques coupled with the latest model-centric development approaches Experience with Cameo Systems Modeler (MagicDraw) or similar SysML modelling software What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. For fully remote roles, employees can live in any state except Idaho, Nebraska, Nevada, Vermont, and Wyoming. Relocation assistance is available for this position. Closing date: July 31st, 2026 Job Category Software Systems Job Posting Date 23 Jun 2026; 00:06 Pay Range $90,985 - $ 147,850-Annually Location: Indianapolis, IN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
06/26/2026
Full time
ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations. PandoLogic. Category: ,
GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. PandoLogic. Category: ,
06/26/2026
Full time
GROUND SYSTEMS ENGINEER II/SENIOR - INSTRUMENTATION AND CONTROLS As a Ground Systems Engineer II/Senior - Instrumentation & Controls - you will collaborate with electrical, mechanical, and software teams to support our launch operations, testing facilities, and mission-critical infrastructure. This role is hands-on and collaborative, requiring you to work closely with suppliers, technicians, and cross-functional teams to deliver world-class solutions. From concept to commissioning, you will play a key role in ensuring Rocket Lab's Ground Systems are reliable, efficient, and ready to support our missions. WHAT YOU'LL GET TO DO: Design, development, verification, and maintenance of software for data acquisition, command/telemetry flow, hardware abstraction, and control of field instrumentation. Implementation of closed-loop control algorithms and automated sequences which enable and optimize launch and test operations. Configuration and troubleshooting of PLC systems and networked I/O devices. Leading commissioning activities and system integration efforts to ensure seamless deployment of new systems. Developing HMI software and user interfaces for critical systems and mission operations. Creating and maintaining technical documentation, including software system designs, functional logic diagrams and operational procedures. Ensuring ground systems meet safety, regulatory, and operational standards. Interact with suppliers and internal teams Perform failure investigations and root cause analysis. Support maintenance program development (Please Note: this position can be hired as a Ground Systems Engineer II or Senior Ground Systems Engineer level) YOU'LL BRING THESE QUALIFICATIONS AS A GROUND SYSTEMS ENGINEER II: Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 2+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. YOU'LL BRING THESE QUALIFICATION AS A SENIOR GROUND SYSTEMS ENGINEER Bachelor's degree in software, mechatronics, electrical, or related engineering discipline. 5+ years of experience in software or control systems engineering, preferably in an aerospace, automotive, or industrial environment. Proficiency in text-based/object-oriented programming languages (Structured Text, Python, or C++) Experience using Git or an alternative software version control system. Experience with closed-loop control design, implementation, and tuning. Experience with signal processing, filtering, and data conditioning techniques for noisy sensor environments. Knowledge of basic IT networking concepts and industrial communication protocols (UDP, TCP/IP, Modbus, EtherCAT) Basic familiarity with electrical schematics, wiring diagrams, and troubleshooting techniques. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Understanding of common sensors and instrumentation and how they work (pressure transducers, RTDs, thermocouples, etc.) Beckhoff/TwinCAT Platform Experience National Instruments/LabVIEW Platform Experience Fluid systems understanding and experience designing control systems for Pressure regulation and flow path management, Filling and de-tanking of pressure vessels, Valve actuation and control Experience designing instrumentation, control, and automation systems for test stands or large industrial facilities Experience designing ISA-88 (batch control) and ISA-101 (HMI) compliant SCADA and HMI systems ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings. Occasional exposure to dust, fumes and moderate levels of noise. WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here . Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. PandoLogic. Category: ,
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
06/26/2026
Full time
The Opportunity Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. We are hiring Maintenance Technicians, each specializing in one of the following disciplines: • Mechanical • Electrical • Plumbing • Controls • HVAC The Service Technician - Maintenance is responsible for ensuring the smooth and efficient operation of building systems and equipment by performing routine maintenance, troubleshooting issues, and executing repairs within their area of specialty. Each technician will serve as the subject-matter expert for their discipline while supporting the overall functionality and safety of our facilities. The ideal candidate is hands-on, technically skilled, and committed to maintaining high standards of operational reliability. What you will do? • Perform scheduled preventative maintenance and unscheduled repairs on building systems and equipment. • Troubleshoot mechanical, electrical, plumbing, controls, or HVAC issues to identify root causes and resolve them efficiently. • Conduct safety checks and inspections in accordance with company and regulatory standards. • Respond promptly to service requests and work orders from internal teams or clients. • Maintain accurate records of work performed, materials used, and time spent on each job. • Assist with installation or replacement of equipment, fixtures, and infrastructure as needed. • Ensure proper use and maintenance of tools, equipment, and safety gear. • Collaborate with vendors, subcontractors, or senior technicians on complex repairs or installations. • Provide excellent customer service and communicate clearly with team members and site contacts. Required Qualifications • High school diploma or GED required; technical school certification or vocational training preferred. • 2-5 years of hands-on maintenance experience in facilities, construction, or industrial environments. • Working knowledge in one or more of the following: Electrical, HVAC, Controls, Generators • Ability to read and interpret technical manuals, blueprints, or wiring diagrams. • Familiarity with safety regulations (OSHA), tools, and troubleshooting procedures. • Strong problem-solving skills and attention to detail. • Valid driver's license and clean driving record. • OSHA 10 or comparable safety certification. Preferred Qualifications • Previous experience in data center operations, maintenance, or field service environments preferred. How we support you We believe your best work happens when you feel supported - professionally, personally, and financially. That's why we offer a range of benefits designed to help you thrive, stay healthy, and plan for the future. • Performance-driven rewards - Competitive pay with incentive opportunities that recognize your results and contributions. • Comprehensive healthcare - Medical, dental, and vision coverage that supports you and your family's total well-being. • Security and peace of mind - Life and disability insurance programs that provide protection when it matters most. • Flexible benefits options - A variety of voluntary benefits so you can personalize coverage to fit your needs. • Time to recharge - Generous paid time off to relax, travel, and maintain a healthy work-life balance. • Investing in your growth - Education assistance and tuition support to help you build skills and advance your career. • Planning for the future - Retirement and savings programs that help you achieve long-term financial confidence. Come build with us At Integra, we're driven by a vision to transform the data center industry. We specialize in delivering optimized turnkey solutions that bring together speed, quality, and reliability - helping our clients build and operate the mission-critical infrastructure that powers today's digital world. Integra is a vertically integrated company - owning and managing every phase of the process from site selection and design to manufacturing, procurement, commissioning, and warranty. This approach allows us to move faster, solve challenges more efficiently, and deliver exceptional outcomes for our partners. What truly sets Integra apart is our people. We are a team of problem-solvers, engineers, builders, and operators who thrive on tackling complex challenges and delivering results. Our culture values collaboration, accountability, and continuous improvement - because in a rapidly evolving digital landscape, excellence and adaptability matter. Joining Integra means being part of a company that is shaping the future of data center infrastructure. If you're passionate about innovation, impact, and building systems the world depends on, you'll find the opportunity to grow and make a difference here. xibtplm Equal Opportunity Statement Integra provides equal employment opportunities for all people. No employee or applicant for employment will be discriminated against because of race, creed, origin, marital status, sexual orientation, age, otherwise qualified disabled or veteran status or any other characteristic protected by law. If you are a qualified applicant who requires reasonable accommodation to complete a job application, pre-employment testing, a job interview or to otherwise participate in the hiring process, please contact
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
06/26/2026
Full time
Job Description Job Description JET Electrical Testing, LLC is seeking experienced electrical test technicians for the positions of Electrical Field Service Test Technician and Senior Electrical Field Service Test Technician . We are a growing IBEW (Union), electrical testing company located near Trenton in Hamilton, New Jersey. Most of our work is located in New Jersey, with some work in New York, Connecticut, Delaware and Pennsylvania. We feature good pay (including significant overtime), benefits (paid through the local union hall), training and a clear path for ascension. Overnight travel is rare. Requirements: Possess a high level of technical expertise as applied to electric transmission and distribution equipment facilities. Must be fully knowledgeable with the National Electrical Code, National Electric Safety Code, Fall Protection, LOTO, OSHA Regulation, Confined Spaces, ARC Flash, Shock Hazards, Safe Work Practices and are experienced working in energized high voltage facilities. A graduate Electrical Engineer or trained technician with at least ten (10) years of relevant experience. Able to read, modify and interpret all types of electrical drawing, schematics, wiring diagrams and logic diagrams. Familiar with all types of test equipment including, but not limited to, circuit breaker timing apparatus, high potential AC and DC test equipment, high current/low impedance ohmmeters, digital multi-meters, relay test apparatus, power quality metering. Possess good computer skills, including MS-Word, MS-Excel, Windows and be willing to learn new software packages as they appear. AutoCAD a plus but not expected. Will be required to perform the work in an IBEW union environment. Must have a valid and clean driver's license. Must have good work ethic. Good communication and interpersonal skills. Must have a clean record and be able to obtain a CDL, TWIC and/or similar document needed. Must pass Pre-hire Drug Screen and background check. Duties & Responsibilities (not limited to): Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Closing and opening of circuit breakers from local control switch. Closing and opening of circuit breakers from a SCADA system. Tripping of circuit breakers from a protective relay system. Operational verification for all internal circuit breaker controls and alarms. Verification of all AC and DC relay wiring. Verification of current transformer (CT) wiring ratio and polarity from the CT to the relays. Settings applied to all programmable relays and instruments (calculation of setting are by the System Protection Engineers). Simulation and verification of all potential device wiring CCVT's and PT's from the potential service to the relay or instrument connected to such devices. Verification of all systems associated with power transformers (load tap changers (LTC's), fans, pumps, alarms, sudden pressure relays, controls). Operational verification of electrical or mechanical safety interlock systems. Verification of SCADA inputs and outputs. Operational verification of auxiliary power systems including, generators, bus transfer and other equipment. Operational verification of relay protective schemes including, breaker failure, transfer trip (Tone and Fiber), bus differential, transformer differential, line protection schemes. Mark up of project drawings to reflect as built/modified conditions includes as required: cable diagrams, schematics, wiring diagrams, relay rack arrangements and physical layout drawings; actual CAD updates will be performed by others from marked prints. Perform troubleshooting and problem identification and analysis. Make recommendations regarding corrective action and/or repairs. Generate technical reports detailing services provided, problems found, and corrective action taken or recommended. Electronic relay setting review and modification (SEL, Multilin, Siprotec, etc.) Circuit tracing and verification. Additional activities on an as required basis such as but not limited to: Electrical tests (Hi-pot, Doble, TTR, Ductor, Megger) Battery voltage regulator set-up. Battery electrolyte quality. Aux power transformer tap set-up. Operational verification of both manual and motor operated disconnects. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair. Company Description JET Electrical Testing is your premier destination for comprehensive electrical testing and system commissioning services in New Jersey. With a team of highly skilled technicians and state-of-the-art equipment, we specialize in various services, including apparatus testing, switchgear testing, switchboard and transformer testing, and grounding system testing. Our expertise extends to acceptance testing specialists to ensure your electrical systems meet industry standards and regulations. At JET Electrical Testing, we understand the critical importance of a reliable electrical infrastructure. We offer emergency electrical repair services to quickly address unexpected issues, minimizing downtime and ensuring the safety of your operations. Our commitment to quality extends to equipment diagnostic testing and dielectric insulation testing, allowing us to pinpoint potential problems and provide effective solutions. With a focus on equipment repairs and maintenance, we are your trusted partner in keeping your electrical systems running smoothly. JET Electrical Testing is the name you can rely on in New Jersey for excellence and peace of mind for electrical testing, maintenance, and equipment failure repair.
Summary: We are looking for a highly motivated Field Applications Engineer / Field Solutions Architect to support presales efforts of our Network Infrastructure and Vehicle Networking product lines. Core responsibilities include providing technical integration of Airgain next generation wireless networking products across multiple domestic US markets. Vehicle applications will be primarily in the western US. Network Infrastructure applications will cover the entire US. Essential Functions: Support the integration of Airgain technologies into new customer systems Conduct site surveys both remotely and on location Utilize radio planning software like iBwave or Ranplan to produce installation and coverage plans Setup and support customer facing demos Work with customers to gather requirements Collaborate with local service integrators, VARs, and channel partners Apply Airgain solutions to meet customer requirements Deliver technical presentations and training to internal and external customers Troubleshoot and document field issues Support QBRs, contribute to sales and marketing strategic planning and execution Requirements/Qualifications: Bachelor's in Electrical Engineering, Computer Engineering, or Computer Science or other related fields (preferred) 3+ years professional technical sales/marketing experience Display broad understanding of typical RF and wireless communications technologies Experience with vehicle networking products Debugging cell coverage, APNs, SIMs, terminal programs, and power supplies Demonstrated experience with Fixed Wireless Access, network repeaters, and LTE infrastructure Strong understanding of user devices, Radio Networks, and Core Networks Understanding of commonly used communication protocols (TCP, UDP, ICMP, etc.) Experience resolving cellular infrastructure problems Hands on experience configuring and troubleshooting base stations and/or DAS Excellent problem-solving and communication skills Able to travel + 25% of the time throughout the US Previous experience as a Field Application Engineer or similar externally facing technical role (Desired) Proficient at using high speed data communication test equipment (Desired) Debugging cell coverage, APNs, SIMs, terminal programs, and power supplies (Desired) Advanced customer interaction and relationship management skills (engineering and senior executive levels) (Desired) Benefits available to Regular Full Time Employees: Medical/Dental/Vision 401K Match ESPP Life & Disability Insurance Vacation and Sick Leave Flexible hours Compensation The US base salary range for this full-time position is $115,000 - $130,000+ target annual bonus. Our salary ranges are determined by a number of factors, including but not limited to the role, location, job-related skills, relevant education, experience and training. The range displayed on each job posting reflects the target range for new hire base salary for the position across all US locations and varies by the location of the position. Our Talent team member can share more about our salary ranges and other benefits of working at name of company, which are not included in the posted base salary range. About Us: Airgain simplifies wireless connectivity across a diverse set of devices and markets, from solving complex connectivity issues to speeding time to market to enhancing wireless signals. Our products are offered in three distinct sub-brands: Airgain Embedded, Airgain Integrated and Airgain Antenna+. Our mission is to connect the world through optimized integrated wireless solutions. Airgain's expertise in custom cellular and antenna system design pairs with our focus on high-growth technologies and our dedication to simplify the growing complexity of wireless. With a broad portfolio of products across the value chain, from embedded components to fully integrated products, we are equipped to solve critical connectivity needs in both the design process and the operating environment across the enterprise, automotive, and consumer markets. Airgain is headquartered in San Diego, California, and maintains design and test centers in the U.S., U.K., and China. About The Team: At Airgain, "We Simplify Wireless" is not only our tagline, but our creed and passion. A fast-moving technology company, Airgain sets the very pulse of the wireless connectivity industry, giving our unwavering focus on bringing innovative solutions to market, providing new pathways, insights and products that solve complex RF engineering problems. Our team is comprised of the industry's most talented, driven, experienced and entrepreneurial innovators and leaders in wireless connectivity. And if that is something that resonates, well then we would love an opportunity to speak with you. Compensation details: 00 Yearly Salary PIbc6-2179
06/25/2026
Full time
Summary: We are looking for a highly motivated Field Applications Engineer / Field Solutions Architect to support presales efforts of our Network Infrastructure and Vehicle Networking product lines. Core responsibilities include providing technical integration of Airgain next generation wireless networking products across multiple domestic US markets. Vehicle applications will be primarily in the western US. Network Infrastructure applications will cover the entire US. Essential Functions: Support the integration of Airgain technologies into new customer systems Conduct site surveys both remotely and on location Utilize radio planning software like iBwave or Ranplan to produce installation and coverage plans Setup and support customer facing demos Work with customers to gather requirements Collaborate with local service integrators, VARs, and channel partners Apply Airgain solutions to meet customer requirements Deliver technical presentations and training to internal and external customers Troubleshoot and document field issues Support QBRs, contribute to sales and marketing strategic planning and execution Requirements/Qualifications: Bachelor's in Electrical Engineering, Computer Engineering, or Computer Science or other related fields (preferred) 3+ years professional technical sales/marketing experience Display broad understanding of typical RF and wireless communications technologies Experience with vehicle networking products Debugging cell coverage, APNs, SIMs, terminal programs, and power supplies Demonstrated experience with Fixed Wireless Access, network repeaters, and LTE infrastructure Strong understanding of user devices, Radio Networks, and Core Networks Understanding of commonly used communication protocols (TCP, UDP, ICMP, etc.) Experience resolving cellular infrastructure problems Hands on experience configuring and troubleshooting base stations and/or DAS Excellent problem-solving and communication skills Able to travel + 25% of the time throughout the US Previous experience as a Field Application Engineer or similar externally facing technical role (Desired) Proficient at using high speed data communication test equipment (Desired) Debugging cell coverage, APNs, SIMs, terminal programs, and power supplies (Desired) Advanced customer interaction and relationship management skills (engineering and senior executive levels) (Desired) Benefits available to Regular Full Time Employees: Medical/Dental/Vision 401K Match ESPP Life & Disability Insurance Vacation and Sick Leave Flexible hours Compensation The US base salary range for this full-time position is $115,000 - $130,000+ target annual bonus. Our salary ranges are determined by a number of factors, including but not limited to the role, location, job-related skills, relevant education, experience and training. The range displayed on each job posting reflects the target range for new hire base salary for the position across all US locations and varies by the location of the position. Our Talent team member can share more about our salary ranges and other benefits of working at name of company, which are not included in the posted base salary range. About Us: Airgain simplifies wireless connectivity across a diverse set of devices and markets, from solving complex connectivity issues to speeding time to market to enhancing wireless signals. Our products are offered in three distinct sub-brands: Airgain Embedded, Airgain Integrated and Airgain Antenna+. Our mission is to connect the world through optimized integrated wireless solutions. Airgain's expertise in custom cellular and antenna system design pairs with our focus on high-growth technologies and our dedication to simplify the growing complexity of wireless. With a broad portfolio of products across the value chain, from embedded components to fully integrated products, we are equipped to solve critical connectivity needs in both the design process and the operating environment across the enterprise, automotive, and consumer markets. Airgain is headquartered in San Diego, California, and maintains design and test centers in the U.S., U.K., and China. About The Team: At Airgain, "We Simplify Wireless" is not only our tagline, but our creed and passion. A fast-moving technology company, Airgain sets the very pulse of the wireless connectivity industry, giving our unwavering focus on bringing innovative solutions to market, providing new pathways, insights and products that solve complex RF engineering problems. Our team is comprised of the industry's most talented, driven, experienced and entrepreneurial innovators and leaders in wireless connectivity. And if that is something that resonates, well then we would love an opportunity to speak with you. Compensation details: 00 Yearly Salary PIbc6-2179
