84 jobs found

Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Job Description We're hiring an experienced RAN Technician to install, integrate, test, and maintain cellular radio access network equipment and the IP routing infrastructure behind it. This is a hands-on field role you'll be at cell sites, equipment shelters, and rooftops across the Denver metro, keeping wireless service running and restoring it fast when it isn't. What you'll do Install, commission, integrate, and maintain RAN equipment baseband, radio, antenna, power, and transmission components. Troubleshoot across radio, router, and transport domains using alarms, logs, performance data, and test equipment. Configure and validate radio parameters and Ethernet/IP connectivity per approved designs and change procedures. Support routers and transport devices: interfaces, VLANs, IP addressing, static and dynamic routing, QoS, and synchronization. Run fiber, copper, RF, and Ethernet testing; isolate faults; and coordinate corrective action with engineering, operations, and field teams. Perform software upgrades, hardware replacements, site acceptance testing, and preventive maintenance. Document configurations, test results, site conditions, and incidents accurately. What you bring Ability to lift 50 lbs. Associate degree in telecommunications, electronics, networking, or a related field or equivalent military/industry experience. Hands-on experience installing, maintaining, or troubleshooting cellular RAN equipment. Experience with LTE RAN platforms and network management or commissioning tools (Nokia or Ericsson preferred). Working knowledge of RF fundamentals, antennas, feeders, fiber optics, grounding, power systems, and site alarms. Practical router and IP networking experience Ethernet, VLANs, IPv4/IPv6, routing, QoS, and basic packet analysis. Able to read network diagrams, site drawings, method-of-procedure documents, alarm data, and technical manuals. Valid driver's license and ability to travel to field locations. Nice to have Nokia AirScale radio and baseband; Nokia service routers or comparable carrier-grade routing platforms. LTE and 5G NR architecture, fronthaul/backhaul, timing and synchronization, microwave transport. Certifications in Nokia technologies, routing/switching, fiber optics, RF, or tower safety. Carrier, utility, public-safety, or other high-availability network environment experience. Details Location: Henderson, CO field based, mostly onsite; company truck provided for site-to-site travel (no overnight travel) Schedule: standard hours, with occasional nights/weekends for planned maintenance windows Contract: 12 months, potential to extend or convert full-time W-2 position Interview process: 1-2 rounds

Job Description Applications Engineer Location: Midwest, USA Salary Range: $70,000 - $90,000 Become Part of the Revolution If you're looking to join the hottest tech company in the fast-growing 3D printing market, this is the role for you. As an Applications Engineer, you will be working with printer technologies, additive materials, data, and processes that are on the leading edge of the industry. As an Applications Engineer, you will become a technical expert in promoting PostProcess solutions to customers aligning with various print technologies. This will require building relationships with current customers, supporting sales efforts with prospective customers, and continuing to monitor the ever-changing applications developing in the AM industry. At PostProcess, we are driven to provide Exceptional Customer Satisfaction through frequent communication and timely support. As the technical expert in AM applications, you will regularly assist the Sales team with potential customer visits. During these visits, you will be the technical voice for any customer questions as they relate to the PPT solutions or customer applications and parts. These parts will span the full range of the manufacturing sector, from automotive to aerospace and medical. The AE will conduct this effort for both the PPT Territory Business Development Managers (TBDMs) and Channel Partner Sales teams. After the sale, Applications Engineering will oversee the installation process. This will include certifying technicians, maintenance staff, and manufacturing personnel that will utilize our comprehensive solution (software, hardware, chemistry). Applications Engineering will have responsibility for the maintenance and repair of previously installed equipment either under warranty or with customers that have purchased a Service Contract. Exceptional customer service during the contract period will help us achieve our aggressive Service Contract renewal rate. Our technologies are constantly evolving along with the needs and requirements of our expanding customer base. Applications Engineers at PostProcess Technologies will be at the front line, determining what these needs are, and playing a vital role in the growth of both the company and the industry of Additive Manufacturing. Duties and Responsibilities The essential functions of the position include, but are not limited to, the following: Work with customers to understand their applications and how PostProcess Technologies solutions will work for those applications. Provide application-specific details to FINISH3D for processing benchmarks from the customer. Nurture and maintain trusted-advisor customer relationships beginning with the Benchmark process, through headquarter visits, site inspection, equipment installation, and continued post-sale support, resulting in exceptional customer satisfaction. Spend notable time in Buffalo learning/understanding the technology and performing tasks including supporting the Benchmark process and becoming fully knowledgeable on how our Hardware, Software and Chemistry (media and detergents) all work together to achieve optimal post-print results across all additive manufacturing technologies from thermoplastics, photopolymers, and metals. Establish and maintain regular post-sale communication with each assigned customer to ensure equipment is being fully utilized and generating regular consumable sales. Assist in the development of training materials, user guides, and maintenance procedures used both for customers and PPT employees as initial training tools and continued education. Work directly with the Sales Team to identify Key Opportunities with existing and potential customers Serve as the technical "voice of the customer" liaison between the customer and FINISH3D to promote continuous improvement activities in Hardware, Software, and Chemistry development. Regularly update FINISH3D of new or advanced additive materials, processes, and customer applications and make recommendations for product improvements and or new product developments to ensure PostProcess Technologies maintains its position as the leading market innovator. Perform pre-delivery customer site inspections to ensure all installation requirements are or will be met upon delivery of the equipment, providing for seamless equipment installation and immediate customer utilization. Install and integrate PPT solutions at customer's facilities resulting in exceptional customer satisfaction. Administer Site Acceptance Testing (SAT) and maintain thorough and accurate documentation throughout the entire process. Extensive US travel is required. Maintain availability and flexibility for on-call and on-site customer support. Attend trade shows and other significant customer events. Skills and Qualifications Ability to communicate clearly and professionally with strong written and verbal skills. Focus on customer service leading to exceptional customer satisfaction. Understanding of Additive Manufacturing technologies and as a process. Process development, improvement, and implementation. Working knowledge of surface quality including mechanical and chemical treatments for improvement. Ability to write case studies and white papers in support of PostProcess applications. Troubleshooting various types of machinery. Education and Experience Bachelor's Degree in a technical field and 3-5 years relevant experience, or an acceptable combination of both Leadership or management experience preferred Experience using CRM programs such as NetSuite Must hold a valid driver's license Preferred: Security Clearance Desired Attributes Strong Work Ethic Optimistic Problem Solver Team Player - willing to roll up the sleeves and be a utility infielder as required Accountable & Dependable - consistently "Does What They Say They're Going To Do" Resourceful - consistently gets the important things done with limited direction Self-motivated Strong Attention to Detail Trustworthy & Honest High Sense of Urgency Well Organized Quick Learner Seeks Team and Company Success Over Self-Promotion

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.

Job Description Job Description Position: Data Center Technician Location: Memphis, TN 38118 Duration: Longterm Contract to Hire Pay rate $40.00/hr on w2 100% onsite role candidates must be open to ANY shift (1st, 2nd, and 3rd) What You'll Do Provide on-site technical support for Dell PowerEdge and other enterprise server hardware Diagnose and resolve server hardware failures and system issues to minimize customer downtime Perform hands-on hardware installation, removal, replacement, and repair, including: Memory/DIMMs CPUs/processors Power supplies Fans and cooling components Hard drives/SSDs RAID/HBA components NICs and other PCIe components GPUs and accelerator hardware Motherboards/system boards and other server components Perform rack-and-stack, server installation, cabling, component swaps, and hardware configuration Troubleshoot issues involving server hardware, BIOS/firmware, operating systems, and hardware diagnostics Perform firmware and BIOS updates and utilize server management tools such as Dell iDRAC or comparable platforms Execute both reactive break/fix and preventive maintenance following established procedures Troubleshoot and isolate hardware failures using documented diagnostic procedures and technical resources Work directly with customers and internal technical teams during service events to communicate status, troubleshoot issues, and drive resolution Accurately document service activities, hardware replacements, troubleshooting steps, and resolution details Escalate complex technical issues when appropriate Participate in on-call rotations and provide extended coverage as required What You Bring - Required 3+ years of hands-on experience supporting enterprise servers, data center hardware, or similar infrastructure Direct, hands-on experience physically working on server hardware - installing, removing, diagnosing, repairing, or replacing server components Experience troubleshooting and replacing components such as memory, CPUs, power supplies, storage, RAID/HBA, NICs, fans/cooling systems, PCIe components, or GPUs Experience working with rack-mounted enterprise servers in a data center, field service, or customer environment Strong understanding of server hardware architecture and troubleshooting methodology Experience with hardware diagnostics, BIOS/firmware, and server management tools Familiarity with Linux or similar operating systems Strong troubleshooting and problem-solving skills with the ability to independently diagnose hardware issues Comfortable working independently in a customer-facing environment Ability to clearly communicate technical issues and resolutions to customers and internal teams Ability to lift up to 50 lbs., travel to customer sites, and support flexible/on-call schedules Company Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: Company Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at:

Job Description Job Description Position: Data Center Technician Location: Memphis, TN 38118 Duration: Longterm Contract to Hire Pay rate $40.00/hr on w2 100% onsite role candidates must be open to ANY shift (1st, 2nd, and 3rd) What You'll Do Provide on-site technical support for Dell PowerEdge and other enterprise server hardware Diagnose and resolve server hardware failures and system issues to minimize customer downtime Perform hands-on hardware installation, removal, replacement, and repair, including: Memory/DIMMs CPUs/processors Power supplies Fans and cooling components Hard drives/SSDs RAID/HBA components NICs and other PCIe components GPUs and accelerator hardware Motherboards/system boards and other server components Perform rack-and-stack, server installation, cabling, component swaps, and hardware configuration Troubleshoot issues involving server hardware, BIOS/firmware, operating systems, and hardware diagnostics Perform firmware and BIOS updates and utilize server management tools such as Dell iDRAC or comparable platforms Execute both reactive break/fix and preventive maintenance following established procedures Troubleshoot and isolate hardware failures using documented diagnostic procedures and technical resources Work directly with customers and internal technical teams during service events to communicate status, troubleshoot issues, and drive resolution Accurately document service activities, hardware replacements, troubleshooting steps, and resolution details Escalate complex technical issues when appropriate Participate in on-call rotations and provide extended coverage as required What You Bring - Required 3+ years of hands-on experience supporting enterprise servers, data center hardware, or similar infrastructure Direct, hands-on experience physically working on server hardware - installing, removing, diagnosing, repairing, or replacing server components Experience troubleshooting and replacing components such as memory, CPUs, power supplies, storage, RAID/HBA, NICs, fans/cooling systems, PCIe components, or GPUs Experience working with rack-mounted enterprise servers in a data center, field service, or customer environment Strong understanding of server hardware architecture and troubleshooting methodology Experience with hardware diagnostics, BIOS/firmware, and server management tools Familiarity with Linux or similar operating systems Strong troubleshooting and problem-solving skills with the ability to independently diagnose hardware issues Comfortable working independently in a customer-facing environment Ability to clearly communicate technical issues and resolutions to customers and internal teams Ability to lift up to 50 lbs., travel to customer sites, and support flexible/on-call schedules Company Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: Company Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at:

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Job Description Job Description Job Title: Quality Control Technician Location (On-site, Remote, or Hybrid?): Scarborough, ME 04074 (onsite) Contract Duration: Contract until 03/31/2027 Work Hours: Monday - Friday (1st shift) 8am-4:30pm Description: The position of Quality Control Technician is within Infectious Disease Developed Markets business unit located at Scarborough, Maine. In this role you will perform work required to ensure Company product quality is maintained at standards set forth by Company Quality System and mandated by regulatory agencies such as the FDA, ISO, and CMDR. RESPONSIBILITIES: Perform testing of in-process components for Lateral Flow, ELISA and Molecular products Perform final release testing for Lateral Flow, ELISA and Molecular products Troubleshooting of technical and quality issues Undertake new procedures and observe proper safety precautions Able to perform technical procedures and use laboratory equipment Review batch records Calibrate/maintain laboratory equipment Maintain Good Manufacturing/Laboratory Practices (GMP/GLP) BASIC QUALIFICATIONS EDUCATION: Associates degree in Biology, Chemistry, Life Sciences or other related technical field or equivalent combination of education and experience 1+ years of laboratory and/or quality control experience PREFERRED QUALIFICATIONS: 2+ years' experience in a regulated industry. 2+ years' experience with GMP, FDA, ISO and USDA regulations. Prior experience in the following areas: Pipette experience pH meter ELISA assays COMPETENCIES: Working knowledge of internet software, MRP Inventory/Manufacturing software and Microsoft Office Suite (Outlook, Excel, and Word). Knowledge of enzyme and/or immunochromatographic assays, inspection/measurement systems, systematic troubleshooting, statistics and data analysis. Perform a wide variety of activities to support the Quality Management System. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to follow Good Manufacturing/Laboratory Practices (GMP and GLP) Education and/or Experience Bachelor's degree in a scientific or technical area or equivalent combination of experience and education. At least one year in quality assurance role in medical device industry is preferred. Language Skills - English: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before small groups of customers or employees of organization. Mathematical Skills : Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Computer Skills : To perform this job successfully, an individual should have knowledge of Database software; Internet software; Inventory software; Spreadsheet software and Word Processing software. Certificates, Licenses, Registrations - None Other Skills and Abilities: Ability to follow procedures and accurately document results Understanding the manufacturing processes of Company products and ability to recognize deviations from approved documented procedures Attention to detail. Ability to use bleach for cleaning purposes is required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit and stand. The employee is occasionally required to walk. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is quiet to moderate.

Job Description Job Description Manufacturing Support Technician JOB SUMMARY: Assist Technical Department staff with daily activities, such as but not limited to collection of data, raise and review technically-related Quality Management System (QMS) documents, and maintain configuration control. Production floor support and training, bills of materials. • Support requirement identification • Interact with tooling vendors and sub-contractors • Develop understanding of all aspects of product • Understand impact of changes to process Raise and review any technically related QMS documents such as but not limited to: • Manufacturing Process Instructions • Job Safety Analysis Worksheets • Process Control Cards • Query Notes • Technical Instructions (review only) • Configuration Change Management documentation (review only) • Regulatory documentation (review only) • Fixturing • Learn Solutioning and Welding • Creation of BOM Technical related problem solving for the manufacturing processes for all value streams manufactured at Sharon Center. Understand and participate in Configuration Change Management reviews Assist with tooling identification, procurement, and maintenance Support customer service calls Support marine packing schools as required Assist with template requirement, construction, verification, and review Ensure job role-specific disciplines of standards, such as but not limited to ISO9001, OSHA, MED, and USCG, are maintained Working in an environment where various solvents, adhesives, RF Welding equipment and industrial manufacturing machines are used is a requirement of this job role. Education/Experience: • High school diploma required • Advanced education in technical-related field preferred • 1 - 2 years of work experience in technical or mechanical environment preferred Software: Experience in creating and working with the following Microsoft Office applications: • Microsoft Outlook • Microsoft Word • Microsoft Excel PId78a3ae109c4-8471

Job Description Job Description Onsite Data Center Operations - Lees Summitt, MO 1 year assignment Projected Start Date - ASAP Candidates must be US Citizens to obtain company security clearance Please no third party inquiries. Thank you. 4 plus year experience Core Infrastructure Management Install, cable: Servers, storage systems, and racks Network equipment (switches, routers, firewalls) Perform hardware upgrades, replacements, and decommissions Cable management (fiber and copper patching) Rack and stack equipment for new customer deployments Patch firmware and systems where applicable Experience needs to include troubleshooting and repairing and maintaining: Server Hard Drives, Power supplies, BIOS configurations, RAID configurations, Blade Enclosures Customer Support (Key in Multi-Customer DCs) Provide remote hands services, such as: Rebooting servers Swapping drives or cables Checking indicator lights or console output Change Management & Documentation Follow strict change control processes Maintain accurate documentation: Rack layouts Network diagrams Asset inventory Log all work performed for auditing and compliance Vendor & Hardware Coordination Work with vendors for: Hardware repairs (RMA) Maintenance contracts Schedule and supervise third-party work IT Asset Management & Inventory Maintain accurate inventory of all IT assets: Servers, networking equipment, storage devices Customer-owned vs. provider-owned hardware Tag and label equipment with asset IDs and customer identifiers Track asset locations (rack, cabinet, cage level) Ensure proper disposal or recycling of retired equipment (following compliance standards) Receiving & Logistics Receive, inspect, and log incoming equipment shipments Verify contents against purchase orders or customer requests Coordinate staging of equipment before deployment Manage shipping and returns (RMAs) Documentation & Asset Tracking Systems Update and maintain asset management systems (e.g., CMDB, DCIM tools) Record: Serial numbers MAC addresses Warranty details Ownership (customer-specific tracking is key in multi-tenant DCs) Additional Information All candidates are encouraged to apply, but many positions require a strict drug and background check by our customers. F2OnSite supports and adheres to all state laws regarding background checks. Company Description F2OnSite is the fastest growing IT field services company in the United States, with hundreds of employee technicians in over 40 states. F2 OnSite performs service on computers, printers, point of sale systems, servers and other hardware technologies - including installations, migrations, deployments and break/fix. Learn more at WHAT WE DO: Our focus is Hardware: Desktops, Laptops, Servers, Printers, POS systems, and LCDs. We have hundreds of team members across the US who work Onsite at customer locations - providing hardware break/fix services, migrate data, install computers, move printers, install/fix servers and POS systems. We close thousands of service calls each week, and do whatever it takes to get our customers up and running again. We specialize in all types of technology, projects, desktop support and more. Company Description F2OnSite is the fastest growing IT field services company in the United States, with hundreds of employee technicians in over 40 states. F2 OnSite performs service on computers, printers, point of sale systems, servers and other hardware technologies - including installations, migrations, deployments and break/fix. Learn more at WHAT WE DO: Our focus is Hardware: Desktops, Laptops, Servers, Printers, POS systems, and LCDs. We have hundreds of team members across the US who work Onsite at customer locations - providing hardware break/fix services, migrate data, install computers, move printers, install/fix servers and POS systems. We close thousands of service calls each week, and do whatever it takes to get our customers up and running again. We specialize in all types of technology, projects, desktop support and more.

Job Description Job Description DATA CENTER TECHNICIAN Location; Santa Clara, CA JOB DESCRIPTION The Data Center Technician is responsible for supporting the day-to-day physical operations of Multi-Business Engineering (MBE) product labs in Santa Clara. This role focuses on hardware installation and removal, rack-and-stack activities, inventory control, shipping and receiving, equipment handling, and maintaining a clean, safe, and organized lab environment. The technician will work closely with engineering, IT infrastructure, logistics, and facilities teams to ensure that lab equipment is properly received, tracked, deployed, stored, relocated, and shipped as required. The ideal candidate is hands-on, detail-oriented, and capable of managing physical lab operations efficiently in a fast-paced engineering environment. KEY RESPONSIBILITIES Racking and Stacking Rack and un-rack servers, network switches, storage devices, and other lab equipment. Install rack rails, mounting brackets, shelves, and related hardware. Perform physical installation and removal of equipment according to provided instructions and rack layouts. Connect and organize power cables, Ethernet cables, and fiber-optic cables as required. Assist with server relocations, rack reorganization, and lab hardware deployments. Inventory and Asset Management Maintain accurate inventory records for servers, switches, components, cables, and other lab equipment. Record equipment details, including asset tags, serial numbers, model numbers, quantities, and locations. Shipping and Receiving Receive incoming hardware shipments and verify items against purchase orders, packing slips, and delivery documentation. Inspect incoming equipment for visible damage and report discrepancies or missing items. Unpack, label, and register received hardware in the inventory system. Prepare servers, components, and other equipment for shipment, return, or relocation. Lab Cleanliness and Organization Maintain a clean, orderly, and safe engineering lab environment. Keep racks, workbenches, storage shelves, and equipment staging areas organized. Perform routine lab housekeeping, including removing packaging materials and disposing of waste according to lab procedures. Hardware Handling and General Lab Support Assist with hardware deployments, equipment relocations, and lab setup activities. Perform visual inspections of servers, boards, cables, and hardware components. Assist engineering teams with staging and organizing equipment for testing and validation. Work independently on assigned tasks and coordinate with cross-functional teams to complete requests on time. QUALIFICATIONS Education High school diploma or equivalent required. Associate's or Bachelor's degree in Information Technology, Electronics, or a related technical field preferred. Required Skills and Experience Hands-on experience installing, mounting, and removing servers, switches, and other hardware in equipment racks (racking and stacking). Experience tracking server hardware, components, cables, and lab assets while maintaining accurate inventory records. Experience with receiving, inspecting, documenting, labeling, packing, and shipping hardware and equipment. Ability to maintain a clean, organized, and safe lab environment, including proper cable management and equipment organization. Ability to safely handle IT equipment, follow established procedures, and coordinate effectively with engineering, logistics, and facilities teams. Technical Knowledge and Proficiencies Familiarity with server racks, rack rails, mounting hardware, and cable management accessories. Knowledge of servers, switches, storage devices, and other data center equipment. Experience using barcode scanners, asset tags, and inventory tracking systems. Familiarity with inventory management tools, spreadsheets, and asset management platforms such as GLPI. Knowledge of shipping and receiving documentation and package tracking systems. Basic understanding of Ethernet, fiber-optic, and power cables, as well as rack power distribution units (PDUs). Basic knowledge of server hardware components, including CPUs, memory, storage drives, and power supplies. Company Description Platinum Resource Group is a professional level consulting firm, providing resources to Fortune 1000 client companies in the areas of technology, human resources, accounting, finance, business systems and supply chain, on a contract and interim basis. PRG has operations in Orange County, San Diego, Los Angeles and San Francisco. As a W-2 employer we offer our consultants direct deposit bi-weekly payroll, health, dental, vision benefits, and referral bonuses. Company Description Platinum Resource Group is a professional level consulting firm, providing resources to Fortune 1000 client companies in the areas of technology, human resources, accounting, finance, business systems and supply chain, on a contract and interim basis. PRG has operations in Orange County, San Diego, Los Angeles and San Francisco. As a W-2 employer we offer our consultants direct deposit bi-weekly payroll, health, dental, vision benefits, and referral bonuses.

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.

Job Description Job Description Benefits: Flexible schedule Profit sharing Training & development This Is Not Your Average Fiber Technician Job There is another post for IT Technicians as well, this is meant for FIBER techs Are you a hands-on Fiber Optic, I.T., or Telecom professional looking for something beyond basic installations? Hardy Industries is seeking skilled, driven Fiber Testing and Splicing Technicians to support our growing national client base. This role goes far beyond simple cable testing - one day you may be certifying fiber links with an OTDR, the next you're troubleshooting network impairments, performing fusion splicing (only if you know how), replacing damaged jumpers, or identifying faults across critical infrastructure. If you're the kind of person who thrives in the field and enjoys solving complex connectivity challenges, this opportunity is for you. Job Responsibilities Perform a wide range of fiber optic and technical tasks including but not limited to: Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who already know how) OTDR testing, power meter testing, light source testing, and fiber certification Fiber continuity testing and fault-distance identification Connector inspection, cleaning, and remediation Patch-cord troubleshooting and fiber jumper replacement Installation, termination, and testing of single-mode and multi-mode fiber optic cabling Identification and troubleshooting of customer-premise and network-side impairments Documentation of test results, splicing records, and project deliverables Work independently across various environments including retail, medical, restaurant, corporate, telecommunications, and data center facilities Maintain a high standard of professionalism with clients and project stakeholders Be available to accept service requests within your coverage territory depending on your availability, NOT FULL TIME Preferred Skills & Experience Fiber optic testing and troubleshooting experience required Experience with OTDRs, power meters, light sources, fiber certification equipment, and visual fault locators Understanding of single-mode and multi-mode fiber optic systems Familiarity with structured cabling standards and best practices Ability to read network diagrams, splice schematics, blueprints, and technical documentation At least 1 year of Fiber, I.T., or Telecom experience , and one of the following: FOA Certification CFOT Certification BICSI Certification Network+ Certification OR 5+ years verifiable Fiber, I.T., or Telecom field experience Required Equipment & Qualifications Reliable personal vehicle (Public transportation not accepted) Valid driver's license Must have a standard set of fiber optic and telecommunications tools if you have the following it's a plus but do NOT rush out to buy them: 1KM OTDR multi color VFL's fiber cleaning kit fusion splicer kit optical multimeter Laptop capable of documenting test results and accessing project documentation Smartphone with mobile hotspot Ability to safely handle and operate fiber testing and splicing equipment Ability to accept job assignments based on your availability; being available for emergency or after-hours work is a strong advantage Strong attention to detail, punctuality, professionalism, and quality workmanship Compensation & Perks 1099 contractor position Paid hourly while on site Travel pay included (based on travel time; approximately an 80-mile radius from home) App-based tracking for job time and travel Opportunity to work on fiber infrastructure, telecommunications, enterprise networking, and data center projects nationwide Exposure to new technologies, clients, and challenging technical environments Opportunity to expand your fiber optic, telecommunications, and networking skill set About Hardy Industries Hardy Industries is a trusted provider of I.T., Telecommunications, and Infrastructure Services supporting clients nationwide. We specialize in fiber optic testing and splicing, structured cabling, network infrastructure, telecommunications systems, point-of-sale deployments, and field technology services. Our mission is to deliver reliable, scalable, and efficient technology solutions that keep our clients connected and operational. Ready to take your Fiber Optic and I.T. career to the next level? Apply today and join a team that values flexibility, technical expertise, and the drive to solve complex connectivity challenges.