28 jobs found

GNC SYSTEMS ANALYST ENG Contract 6-18 Months 40 hours weekly Must be a US Citizen Client is seeking an engineer with an M.S. or a Ph.D. in Aerospace Engineering or the equivalent. The work will be focused on analyzing and designing guidance, navigation, and control (GN&C) algorithms and flight software. The analysis will include assessment of control, navigation, and guidance system performance, verification of algorithms and algorithm requirements, and analysis of flight dynamics and trajectory dispersions. Time domain simulations, covariance-based methods, and Monte Carlo dispersed analysis will be used to assess and tune system performance and to document analysis results. Qualifications Deep knowledge of MATLAB / Simulink (e.g., Bus objects, S-functions, embedded MATLAB) Knowledge of GN&C algorithm techniques and simulation modeling techniques Background in dynamics and linear analysis of aircraft, spacecraft, and missile closed loop performance (inner and outer loop)

Job Description Job Description Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also driving positive impacts here on Earth. Lunar Outpost is seeking an Electronics and Harness Technician to support the build, assembly, integration, and testing of electrical hardware for lunar vehicles, robotics, and spacecraft systems. In this hands-on role, you will build and inspect wiring harnesses, assemble electronic hardware, perform soldering and rework, and support engineering teams with testing and troubleshooting. Your work will directly contribute to hardware destined for lunar missions and other advanced space technologies. Take the with Lunar Outpost and work on the Lunar Terrain Vehicle (LTV), which will carry NASA astronauts farther than they've ever been before on the lunar surface! Working Conditions / Schedule: This position is required to be onsite Monday, Tuesday, Thursday, and Friday from 9:00 a.m. to 5:00 p.m. Where applicable, employees may work remotely on Wednesdays from 9:00 a.m. to 5:00 p.m. Additional hours may be required based on business needs. Key Responsibilities: Perform hand soldering, rework, and repair of through-hole and surface-mount electronic components Fabricate, assemble, and inspect spacecraft and prototype wiring harnesses, cable assemblies, and electrical hardware Build and integrate electromechanical assemblies from engineering drawings, schematics, work instructions, and wiring diagrams Perform continuity, insulation resistance, and basic electrical verification testing Identify and document hardware nonconformances, workmanship issues, and assembly discrepancies Assist with inventory management, parts preparation, and hardware organization Maintain a clean, safe, and organized laboratory and production environment Support vehicle, subsystem, and prototype integration activities as required Required Qualifications: High school diploma, GED, technical certification, or equivalent experience 3-5 years of experience in electronics assembly, cable fabrication, soldering, or related technical work Demonstrated experience building and inspecting cable assemblies and wiring harnesses Proficiency in hand soldering and electronic rework techniques Ability to read engineering drawings, wiring diagrams, assembly instructions, and schematics Experience using standard electrical test equipment such as multimeters, power supplies, and oscilloscopes Familiarity with ESD controls and electronics handling best practices Strong attention to detail and commitment to quality workmanship Ability to work effectively in a fast-paced hardware development environment Strong communication and organizational skills U.S. Person Preferred Qualifications: IPC J-STD-001 Certified IPC Specialist (CIS) or equivalent solder workmanship certification IPC/WHMA-A-620 Certified IPC Specialist (CIS) or equivalent harness fabrication and inspection certification IPC-A-610 Certified IPC Specialist (CIS) or equivalent electronic assembly inspection certification Experience building aerospace, robotics, automotive, defense, or other high-reliability hardware Experience with aerospace-grade connectors, including Micro-D, D-Sub, circular, and other high-reliability interconnect systems Experience with environmental or vibration test preparation and support Ability to troubleshoot wiring, connector, and assembly issues Experience supporting prototype or low-volume manufacturing environments Compensation & Benefits: Compensation level and base salary are competitively structured and thoughtfully determined based on factors such as relevant skills, experience, education, and the scope of the role. Comprehensive health coverage: Medical, dental, and vision benefits, with 70% of premiums covered by the employer Paid time off: Three (3) weeks per year of vacation Retirement plan: Up to 4% employer match on 401(k) contributions Paid holidays: 11 company-recognized holidays Parental leave Educational reimbursement opportunities to support company objectives, continued learning, and career development Lunar Outpost Inc. is an equal opportunity employer. Lunar Outpost Inc. does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, ethnicity, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. All employees, including executives and human resources personnel, are expected to conduct themselves with professionalism and treat others with dignity and respect in accordance with this policy.

Job Description Job Description Mechanical Integration and Test Engineer Voyager is an innovative space, defense, and national security technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers, and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. Relocation assistance is provided for qualified candidates moving to Pittsburgh, PA. Job Summary Voyager Lunar Systems (formerly Astrobotic Technology) is seeking a Mechanical Integration and Test Engineer to support planning, execution, and documentation of the integration and validation of requirement compliance through testing of mechanical components and systems of spacecraft, rovers, and lunar infrastructure. Relocation assistance is provided for qualified candidates moving to Pittsburgh, PA. Job Responsibilities: Support design review and approval from a Design for Manufacturing and Assembly (DFMA), and Design for Test (DFT) perspective. Support Test Plan development with Systems and Design Engineers. Draft, maintain, and execute detailed Integration Procedures and Test Procedures. Help ensure readiness of supporting items to perform integration or test operations such as assembly parts, fasteners, consumables, supplies, tooling, and tool calibration verification. Support design of ground support equipment, fixtures, assembly aids, and other tooling for integration and test operations. Prepare supporting material and participate in Integration Readiness Reviews and Test Readiness Reviews. Operate test equipment such as Shaker Tables and Thermal Vacuum Chambers following established procedures and safety requirements. Support off-site operations at third party testing facilities. Collect, process, and organize test data; contribute to Test Reports and data reviews. Work in an integrated team including daily interactions with technicians, engineers, and leadership across our propulsion, thermal, mechanisms, electrical, and structural teams. Required Qualifications B.S. in Mechanical, Aerospace, or a related engineering discipline. 0-2+ years of relevant experience with integration, assembly, or testing of electro-mechanical and/or fluid systems. Ability to write clear technical documentation, including test procedures, work instructions, and reports. Familiarity with CAD; SolidWorks experience preferred. Strong organizational, written, and verbal communication skills. Ability to work effectively in a fast-paced environment with changing needs and requirements. Desired Qualifications M.S. in Mechanical or Aerospace Engineering, or related discipline. Experience with instrumentation, control, and data acquisition. Experience with environmental testing such as Shock, Vibration, Thermal Vacuum, Acoustic, and fluid system testing. Interest in or exposure to aircraft, spacecraft, launch vehicles, or other complex hardware systems. Familiarity with Safety, Quality, ESD, FOD, and cleanroom practices and standards. Experience with basic shop tools, 3D printing, or machining equipment such as mills and lathes. Familiarity with one or more: SolidWorks, VBA, Python, Arduino, Linux, LabView, Siemens TestLab, LabJack. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide, including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness, and more! No long-term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a 50% company match on contributions up to 8%, supporting long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission-driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120130) and the Export Administration Regulations (EAR) (15 CFR Parts 730774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. PI93eaa670e0f0-6837

Mechanical Integration and Test Engineer Voyager is an innovative space, defense, and national security technology company committed to advancing and delivering transformative, mission-critical solutions. We tackle the most complex challenges to unlock new frontiers for human progress, fortify national security, and protect critical assets to lead in the race for technological and operational superiority from ground to space. Forge the Future: Join Voyager Technologies The future belongs to those who build it. At Voyager Technologies, were building technologies that protect lives, expand frontiers and prepare us for whats next. And were doing that with people who are wired to solve, build, adapt and lead. These roles are not for the faint of heart. Youll help lay the foundation for humanity's future. Join a culture where innovation thrives, curiosity is rewarded, and impact is real. Were a company of doers, thinkers, and builders, united by purpose and grounded in reality. If you want to put your skills to work where the stakes are real and the mission is bigger than any one person,forge the future with Voyager. Relocation assistance is provided for qualified candidates moving to Pittsburgh, PA. Job Summary Voyager Lunar Systems (formerly Astrobotic Technology) is seeking a Mechanical Integration and Test Engineer to support planning, execution, and documentation of the integration and validation of requirement compliance through testing of mechanical components and systems of spacecraft, rovers, and lunar infrastructure. Relocation assistance is provided for qualified candidates moving to Pittsburgh, PA. Job Responsibilities: Support design review and approval from a Design for Manufacturing and Assembly (DFMA), and Design for Test (DFT) perspective. Support Test Plan development with Systems and Design Engineers. Draft, maintain, and execute detailed Integration Procedures and Test Procedures. Help ensure readiness of supporting items to perform integration or test operations such as assembly parts, fasteners, consumables, supplies, tooling, and tool calibration verification. Support design of ground support equipment, fixtures, assembly aids, and other tooling for integration and test operations. Prepare supporting material and participate in Integration Readiness Reviews and Test Readiness Reviews. Operate test equipment such as Shaker Tables and Thermal Vacuum Chambers following established procedures and safety requirements. Support off-site operations at third party testing facilities. Collect, process, and organize test data; contribute to Test Reports and data reviews. Work in an integrated team including daily interactions with technicians, engineers, and leadership across our propulsion, thermal, mechanisms, electrical, and structural teams. Required Qualifications B.S. in Mechanical, Aerospace, or a related engineering discipline. 0-2+ years of relevant experience with integration, assembly, or testing of electro-mechanical and/or fluid systems. Ability to write clear technical documentation, including test procedures, work instructions, and reports. Familiarity with CAD; SolidWorks experience preferred. Strong organizational, written, and verbal communication skills. Ability to work effectively in a fast-paced environment with changing needs and requirements. Desired Qualifications M.S. in Mechanical or Aerospace Engineering, or related discipline. Experience with instrumentation, control, and data acquisition. Experience with environmental testing such as Shock, Vibration, Thermal Vacuum, Acoustic, and fluid system testing. Interest in or exposure to aircraft, spacecraft, launch vehicles, or other complex hardware systems. Familiarity with Safety, Quality, ESD, FOD, and cleanroom practices and standards. Experience with basic shop tools, 3D printing, or machining equipment such as mills and lathes. Familiarity with one or more: SolidWorks, VBA, Python, Arduino, Linux, LabView, Siemens TestLab, LabJack. Voyager offers a highly competitive total compensation package designed to support the well-being, growth, and success of our employees. Employees benefit from a flexible and comprehensive rewards program that supports both professional and personal well-being. Flexible Time Off (FTO), empowering employees to take the time they need to recharge and maintain a healthy work-life balance Comprehensive medical, dental, and vision coverage for employees and their families, with a significant portion of premiums covered by the company and many benefits paid at 100% for employees Flexible, affordable gym memberships with 12,700+ options nationwide, including 24 Hour Fitness, EoS Fitness, Crunch Fitness, Anytime Fitness, Blink Fitness, Chuze Fitness, and more! No long-term contracts and FREE on-demand workout videos before you enroll 401(k) retirement plan with a 50% company match on contributions up to 8%, supporting long-term financial security Company wellness programs that support physical and mental well-being Additional voluntary benefits and employee support resources The opportunity to work alongside a highly talented team in an innovative, mission-driven environment Voyager is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. To conform to U.S. Government export regulations, including the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120130) and the Export Administration Regulations (EAR) (15 CFR Parts 730774), applicants for this position must be a U.S. Person: a US Citizen, a lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Applicants must be eligible to obtain any required export authorizations from the U.S. Department of State or the U.S. Department of Commerce. Minority/Female/Disabled/Veteran The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. PI54fa3-6837

Support integration and testing of mechanical components and systems for spacecraft, rovers, and lunar infrastructure. Develop and execute procedures, operate environmental test equipment, collect and analyze test data, and collaborate with cross-functional engineering and technician teams. Responsibilities Support design reviews for manufacturability, assembly, and testability. Develop test plans with systems and design engineers. Draft, maintain, and execute integration and test procedures. Prepare parts, tools, fixtures, consumables, and calibrated equipment for operations. Operate shaker tables and thermal vacuum chambers and support off-site testing. Collect and organize test data and contribute to test reports and reviews. Required Skills Mechanical integration Hardware assembly Test planning Test procedure development Technical documentation CADSolid Works Environmental testing Test equipment operation Test data acquisition and analysis

Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role As K2's Crypto Engineer, you will own the architecture and design of our Type-1 cryptographic integrations across the spacecraft and ground segment. You will carry these designs cradle-to-grave - from concept and trade studies, through implementation and integration, to NSA certification and accreditation, and into on-orbit operations. You'll define how K2's satellites protect command, telemetry, and mission data; partner with NSA, government customers, and certification authorities; and ensure our COMSEC architecture meets the bar for national-security missions while fitting the pace and scale of a high-volume satellite production line. This is a foundational role: you'll set the cryptographic standards the rest of the program builds against. Responsibilities Own the end-to-end architecture and design of Type-1 cryptographic integrations across the spacecraft, payload, and ground segment Lead crypto designs from concept and trade studies through implementation, integration, certification, and on-orbit operations Define COMSEC architecture for command, telemetry, and mission data protection, including encryption, key management, and key loading approaches Serve as K2's primary technical interface to NSA, certification authorities, and government customers on cryptographic certification and accreditation Drive the certification and accreditation effort, developing the artifacts, test evidence, and documentation required to achieve and maintain approval to operate Partner with flight software, avionics, RF, ground, and security teams to integrate cryptographic functions into the broader system architecture Support COMSEC handling, key management planning, and operational procedures for on-orbit fleet operations Identify and mitigate cryptographic and supply-chain risks across design and production Establish reusable cryptographic standards, interfaces, and processes that scale across K2's satellite production line Qualifications Bachelor's degree or higher in electrical engineering, computer engineering, computer science, or a related discipline 5+ years of engineering experience with cryptographic systems, COMSEC, or secure communications Direct experience with NSA Type-1 cryptographic equipment, integration, and certification processes Working knowledge of key management, key loading, and COMSEC handling requirements Experience taking a hardware or system design through certification and accreditation to operational use Strong systems-level thinking with the ability to reason from first principles across hardware, software, and RF boundaries Ability to work in a fast-paced, autonomously driven, and demanding startup atmosphere with competing priorities and aggressive schedules Nice to Have Experience with spacecraft, satellite, or other space-system cryptographic integrations Familiarity with cryptographic modernization initiatives and current NSA-approved algorithms and equipment Experience with RMF/ATO, JSIG, or other accreditation frameworks Background in RF, link design, or secure command and telemetry systems Experience supporting on-orbit or fielded operations Additional Requirements Ability to travel up to 25% of the time Active Top Secret or Top Secret SCI clearance required; ability to obtain and maintain access to additional programs as needed Ability to work irregular business hours to support critical project timelines or operations This role requires access to information controlled under ITAR/EAR; applicants must be a U.S. Person as defined by applicable regulations Compensation and Benefits Base salary range for this role is $160,000 - $245,000 + equity in the company Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Description Ground Station Operations Engineer Houston, TX About Intuitive Machines Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About The Role Intuitive Machines is seeking multiple Ground Station Operations Engineers to join our team. This role can be filled at experience levels from early- to mid-career. These positions will support ongoing operations, along with development and testing of a commercial Telemetry, Tracking and Control (TT&C) network of ground stations. The applicant(s) will be located on-site at Intuitive Machines' Houston, TX location, and will operate in a cross-functional team on the design, development, test, and operation of ground station hardware, including associated software. Responsibilities: Support advancement and real-time operations of IM's global ground station network Assist in development and execution of test plans for ground station hardware, encompassing: Base Band Units (BBUs), AWS cloud infrastructure, RF systems, mission control center systems, and other critical ground elements Develop real-time operations products, including procedures, asset schedules, troubleshooting documentation and Interface Control Documents (ICDs) Support (and potentially lead) technical and programmatic meetings, including working groups, Integrated Product Teams (IPTs), etc. Serve as a real-time operator, eventually leading a small team of subsystem experts Work with internal and external stakeholders to integrate ground software and network automation Participate in Integration & Verification activities Develop and enforce Mission Rules to ensure vehicle/system health and mission objectives The candidate will be encouraged to take on as much responsibility as practical and will be expected to play a role in the entire cradle-to-grave development process, including requirements development, conceptualization, supplier relationships, procurement, procedure development, and on-console mission operations support. Qualifications: B.S. degree in Aerospace Engineering, Mechanical Engineering, Computer Science, Electrical Engineering, or related discipline Minimum of 5 years of experience in ground station development/testing, real-time mission operations or related discipline; or M.S. degree in Aerospace Engineering or related discipline and a minimum of 2 years of experience Proficiency in conducting ground station testing and operations Familiarity with test equipment such as network analyzers, oscilloscopes, modems, etc. Conducting benchtop testing of RF, analog and digital signals Knowledge of ground station hardware, including HPAs, LNAs, circulators, diplexers, etc. Experience making time-sensitive decisions in high-pressure, high-risk environments Preflight training and development of integrated procedures and mission rules Demonstrated cross-discipline support Experience with Microsoft Office suite and other collaboration tools (e.g., Atlassian Confluence, Jira, etc.) Preferred Skills: Familiarity with ground station design and operations, including hardware, software, communications (RF) Experience with spacecraft and associated systems, e.g., flight control, flight dynamics, orbital mechanics, power systems, avionics, ground support systems (command, telemetry) Real-time spacecraft/satellite operations, preferably spanning multiple disciplines or functions Fundamental grasp of networking principles and protocols (TCP/IP, DHCP, UDP, routing) Proficiency in operational leadership and risk management Experience with international partners US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Job Description Principal GNC Engineer Location: Playa Vista, California (in-person, five days per week) The return lane isn't going to build itself. Come build it with us. Outpost is an orbital logistics company rewriting the rules of global logistics by building reusable Earth-return vehicles that unlock in-space manufacturing, on-orbit warehousing, and 60-minute global delivery through space. Our CarryAll vehicle family returns payloads ranging from 200 kilograms to 10 metric tons, lands within 10 meters of its target, and can then be refurbished and launched again. One vehicle, many missions: responsive logistics and precision delivery for national security; commercial cargo moved with real cadence; R&D payloads flown, tested, and refined across repeatable cycles; and critical aid delivered where roads and runways can't reach. The demand is already here, validated through defense and civil agreements and supported by a growing pipeline of government and commercial customers. We have the customers, the team, and a clear technical path ahead of us. We're building the return lane. Come build it with us The Role Outpost is building vehicles that bring things back from space. Getting mass from orbit to a precise point on the ground is a GNC problem end to end: a deorbit burn that has to hit an entry corridor, a hypersonic entry that has to bleed energy inside structural and thermal limits, and a guided descent that has to land on a target, repeatably, and cheaply enough to do it often. We're hiring a Principal GNC Engineer to own that chain. This is not a role where you hand algorithms over a wall. You'll design the guidance and estimation architecture, write the flight code, put it on hardware, sit through the HIL runs, go out to the drop tests and flight campaigns, and come back with data that changes the design. If you want to see your controller fly within months rather than years, this is that job. Basic Qualifications: Bachelor's degree in a related technical discipline with 5+ years as a GNC or Controls professional or Advanced degree with 3+ years as a GNC or Controls professional Software development experience in C++ and Python. Experience in software tools such as Git, Jira, and CI Pipeline Algorithms on real hardware (e.g. Extended Kalman Filters, LQR) Strong understanding of classical dynamics, modeling and simulation, classical and modern control. Ability to work in a fast paced, autonomously driven atmosphere. Passion for space and the application of advanced estimation and control techniques in this domain Additional Qualifications: Experience with implementing optimal control for burn planning Experience with satellite maneuvering and thruster systems Demonstrated project or professional experience in satellite attitude determination and control Experience in end-to-end development of three axis stabilized spacecraft incorporating momentum, magnetic, and/or propulsive control. Experience with flexible body control, orbital maneuvering, filtering, fault management, software development, and navigation filtering. Responsibilities: Modeling, design, analysis, implementation and test of satellite attitude determination and control (ADCS) algorithms. Hardware performance specification including reaction wheel and torque rod sizing, sensor noise and performance, characteristics, redundancy and fault management. Define and own ADCS requirements definition with electrical and mechanical engineers Implement closed loop pointing, orbit raising, and station keeping algorithms for flight. Analyze platform stability to ensure low jitter of line-of-sight instruments. Develop high fidelity 6 degree of freedom satellite simulations using Python, Matlab or C++. Develop entry guidance, entry corridor and reachability analysis, deorbit burn targeting, aerothermal and load-constrained trajectory shaping. Develop EKF and UKF with GNSS, IMU, air data, radar or laser altimetry, magnetometers, and optical or terrain-relative sensors; sensor error modeling and calibration; GNSS-denied or degraded navigation, including through plasma blackout. Implement control of aerodynamically unstable or marginally stable vehicles, gain scheduling and robust control across wide Mach and dynamic pressure ranges, actuator and effector allocation, autonomous mode sequencing and abort logic. Support flight test campaigns at test sites - test planning, instrumentation requirements, real-time support, and flight data reconstruction. Compensation & Benefits: Salary: Principal: $190,000- $225,00, based on experience Additional Compensation: Annual performance-based bonuses that reward your impact. Shared upside: Meaningful equity in Outpost so you share directly in the value you help create. Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security. PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays. Invest in your future: 401(k) with company match to help you build long-term wealth. Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized. Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure. Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too. Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! You must be a U.S. citizen or lawful permanent resident of the U.S., protected individual as defined by 22 C.F.R. 120.15 , or eligible to obtain the required authorizations from the U.S. Department of State

Job Description Job Description Description As a quality and configuration manager, you will be responsible for monitoring and controlling the quality and configurations of TURION's fleet of satellites and subsystems. The primary duties include owning our in-house configuration management process including ECO's part numbers, and release process. You will also be reviewing and internally auditing technical documents and procedures for build, testing, and operations. Key Responsibilities Responsible for planning and implementing configuration management across multiple programs. Responsible for reviewing and auditing internally generated technical documents Utilize disciplined technical management processes to establish and maintain the consistency of a product's functional, physical, and performance attributes throughout its lifecycle Ensure that reliable spacecraft and subsystems are being produced with incrementally increasing complexiity Minimum Qualifications Experience with Configuration Management principles, processes, and requirements. Experience working on government or defense programs Degree in a STEM field Ability to read and understand technical drawings and specifications Experience with process controls and system engineering modeling diagrams e.g. SysML

Job Description Job Description Description As an Mission Operations & Automation Engineer, you will be in mission control for satellite operations, and ultimately responsible for the collection of all of the critical telemetry that we need to verify mission success. This is an opportunity for impactful problem-solving in real-time while making data-driven decisions that impact the space environment, the US government, and Turion Space. While not in mission control, you will have the opportunity to build the operational foundation that we require, including authoring procedures, writing and testing automation, and performing mission planning for all of the ground communications infrastructure supporting our DROID spacecraft and future spacecraft. You will be in direct control of the ground systems throughout the mission, starting with ground integration through launch and on-orbit operations. You will work with subsystem responsible engineers, software engineers, and electrical design engineers to understand and evaluate how the ground segment assets should be operated and execute that vision. As a cross-disciplinary expert, you will ensure that the software and automation running the full system is safe and reliable. This will require you to update software that not only alerts you to issues but also safely recovers the system autonomously from myriad anomalies, ensuring continued mission success. You will help develop and refine the toolchains needed to make daily operations more accessible. Through a process of continuous improvement and automated data review, you will automate the operations of the system to the point of minimal operator intervention. Key Responsibilities Perform real-time ground segment operations according to timeline, procedures, and flight rules Support DROID operations as a member of the flight systems team Interface with external partners (private and government) to schedule/test/operate ground-to-space and ground-to-ground communication systems Own procedures, process improvements, configuration files, and scripting necessary for mission success Drive and support automation improvements for flawless execution of simultaneous missions and an increasing manifest with a small team of operators Work closely with hardware and software teams to ensure operational cadence and ease of use requirements are considered in their design Coordinate worldwide telemetry services for on-orbit activities Coordinate operator and asset schedules Qualifications Minimum Qualifications: Bachelor's degree in computer science, engineering, math, or science discipline Strong programming skills 1+ years of operations experience with spacecraft, ground stations, or other complex communication systems 1+ years of project or industry experience with RF, controls, flight software, spacecraft, and/or communications systems Must be willing to support extended hours and weekends when necessary to support critical project timelines Preferred Skills and Experience: Experience working with government organizations (USAF, NASA, FAA, FCC, NTIA, etc.) Experience/familiarity with front end and backend web development Experience working with and organizing technical data with strong attention to detail Experience developing link budgets and other engineering calculations related to system specification and design LEO, MEO, and/or lunar orbit ground station operations and engineering experience Manipulation and use of tracking and orbit determination files, formats, and tools Experience working on technical teams in a rapidly changing, highly demanding environment Solid fundamental knowledge of networks, electronics, math, engineering, and physics Creative approach to problem-solving, engineering, and design with exceptional analytical skills Excellent communication skills both written and verbal Experience with Python Experience with Ruby Ability to work independently and in a team, take initiative, and communicate effectively Familiarity with Linux-based operating systems Experience with automating complex systems ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits Health Insurance: Comprehensive medical, dental, and vision coverage. Retirement Plans: Access to a 401(k) plan. Paid Time Off: Generous vacation days, personal days, and holidays to ensure you have time to recharge. Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. Diverse and Inclusive Culture: A commitment to diversity and inclusion, with initiatives to support a welcoming and equitable work environment. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of Turion's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department.

Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role From day one, you'll be hands-on with our integrated satellite-level test campaign, diving deep into the K2 bus and laying the foundation for what comes next. Within your first few months, you'll help define how we operate our first mission - shaping the tools, systems, and philosophy behind Mission Operations. As we move toward launch, you'll be at the heart of it all. Over the following year, your impact will grow: evolving our playbook from that first mission, scaling it to support multi-satellite operations, and ultimately pioneering the systems needed for full constellation control. The path to operating dozens-or hundreds-of satellites will be yours to help chart. The success of our constellations will depend on the foundations you help build. Responsibilities Define and operationalize our Mission operations concept for the first satellite mission, including procedures, tools, and real-time support systems Develop telemetry monitoring strategies, fault response frameworks, and command plans for pre-launch, LEOP, and nominal operations Collaborate closely with systems, software, and hardware teams to ensure operational readiness across all spacecraft subsystems Drive the roadmap for mission operations tooling, ground segment workflows, and long-term constellation management Serve as a key operator during on-orbit operations, responsible for real-time decision-making and coordination Operate spacecraft (interpret telemetry, send commands) during system tests at the factory, test facilities, launch sites, and during pre-launch operations Interface with customers to scope testing performed on their payloads, based on expected functions and failure modes of interest Assess risks associated with different integration and test approaches, justify test reductions and optimize vehicle build/test flows for at-rate production Qualifications Bachelor's degree in electrical, aerospace, mechanical, computer, or other relevant engineering discipline 10+ years of experience in an operations/integration/automation engineering role including 4 years of direct experience operating satellites on-orbit Experience testing and troubleshooting spacecraft and their related components and systems, including subsystem checkouts and system acceptance testing Familiarity with mission operations concepts such as LEOP, telemetry, commanding, fault protection, and anomaly resolution Experience building or contributing to custom tooling for telemetry, analysis, data pipelines, or operational dashboards Background in designing or scaling operational architectures for fleets or constellations Experience with scripting or automation tools (e.g. Python, Rust) Excellent conflict resolution and negotiation skills Nice to Have Hands-on experience with HITL or Flatsat software verification testbeds Experience working with GAaaS providers. Experience with Linux systems Experience managing contractual interfaces (e.g. customer, launch vehicle) Compensation and Benefits Base salary range for this role is $180,000 - $210,000 + equity in the company Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role From your very first day, you'll be hands-on with real spacecraft - leading integrated test campaigns, mastering the satellite bus, and working with world-class RE teams to validate system health. You'll then carry that experience into Mission Operations, where you'll command vehicles from the moment they leave the pad through the earliest moments in orbit. As we scale our fleet, you'll become an architect of on-orbit operations: designing the playbooks, tools, and systems needed to fly dozens, then hundreds, of satellites. This role is your chance to directly shape how we operate an entire space constellation. Responsibilities Author test procedures (manual and automated) used to confirm spacecraft hardware and software flight worthiness Lead high-visibility integration campaigns for development and flight hardware Operate spacecraft (interpret telemetry, send commands) during system tests at the factory, test facilities, launch sites, and during pre-launch operations Serve as a key operator during on-orbit operations, responsible for real-time decision-making and coordination Interface with customers to scope testing performed on their payloads, based on expected functions and failure modes of interest Identify and elevate off-nominal conditions during test, and drive issues to resolution by engaging with the wider engineering team Clearly communicate status, needs, and risks to the entire K2 Space team (and payload providers) during high-intensity test operations Assess risks associated with different integration and test approaches, and clearly communicate mitigations and trade-offs Qualifications Bachelor's degree in electrical, aerospace, mechanical, computer, or other relevant engineering discipline 1+ years of experience in an integration/test/automation engineering role (includes internships and design/build/compete extracurricular projects) Competency with analog and digital circuits, sensors/instrumentation, and software Familiarity with basic RF, fluids, statics and mechanics, and data acquisition systems Nice to Have Experience testing and troubleshooting spacecraft and their related components and systems, including subsystem checkouts and system acceptance testing Familiarity with mission operations concepts such as LEOP, telemetry, commanding, fault protection, and anomaly resolution Experience working in a clean room and with ESD-sensitive equipment Experience operating vehicles in a mission or production setting Hands-on experience with HITL or Flatsat software verification testbeds Proficient in Python and/or Rust Experience with Linux systems Excellent conflict resolution and negotiation skills Compensation and Benefits: Base salary range for this role is $100,000 - $150,000 + equity in the company Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions. PRINCIPAL SPACECRAFT GUIDANCE NAVIGATION AND CONTROL (GNC) ENGINEER - SECRET CLEARANCE Based out of Rocket Lab's global headquarters in Long Beach, CA, the Principal Spacecraft GNC Engineer - Secret Clearance is responsible for leading GNC and ADCS development for Rocket Lab's growing fleet of diverse spacecraft. You will demonstrate a firm grasp of spacecraft GNC concepts and applications. You will work with all facets of the engineering life cycle: spacecraft concept and algorithm development, flight software implementation, subsystem requirements development, detailed GNC design, subsystem integration & test (I&T), and vehicle I&T. You will be responsible for planning and maintaining the development schedule to support the Space Systems Software organization in executing leading edge programs and products. You will work closely with related teams, including Systems, Avionics, Flight Software, Mission Operations, and Ground Software. You will also directly interact with customers to ensure mission success. WHAT YOU'LL GET TO DO: Mentor a team responsible for GNC design, modeling, and analysis for a wide variety of spacecraft and space missions to include LEO, MEO, GEO, Lunar, Interplanetary, Reentry, and RPOD Design of flight software, algorithms, and simulation product Development of spacecraft autonomy tools for constellation management GNC component selection and GNC subsystem design Test process development and execution Define fault detection and response Hardware-in-the-loop and Monte Carlo simulation Integration of flight and simulation software with modern analysis, test, and operations tools Support internal and external design reviews Work with department leads and program managers to plan and maintain team schedule and milestones and report technical status Coordinate with teams in Denver, Colorado and New Zealand YOU'LL BRING THESE QUALIFICATIONS AS PRINCIPAL SPACECRAFT GNC ENGINEER : B.S and 12+ years of industry experience in GNC/ADCS Active Secret clearance, with ability to obtain TS/SCI Prior experience directly interfacing with aerospace customers in the commercial or government sectors U.S citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: MS or PhD 2+ years of RPOD design and operations experience Active TS/SCI clearance Experience in Jira planning and workflow Prior experiencing mentoring a team of younger engineers Hands-on experience with IMU, reaction wheels, star trackers, gyroscopes, and other GNC hardware Experience developing blended attitude solutions from a variety of sensor data Demonstrated experience developing, implementing, and verifying flight software Demonstrated experience with spacecraft on-orbit operations and anomaly resolution Prior experience leading a team across a project lifecycle (not necessarily a spacecraft, not necessarily a whole GNC system) Prior experience working multiple projects simultaneously and determining priorities for a team Experience with GNC-related Business Development or conceptual design work This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package , giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $247,000-$376,000 USD Base Salary $195,000-$295,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Job Description K2 is building the largest and highest-power satellites ever flown, unlocking performance levels previously out of reach across every orbit. Backed by over $1 billion in total funding from leading investors including Altimeter Capital, ICONIQ, Kleiner Perkins, Lightspeed Venture Partners, Redpoint Ventures, and T. Rowe Price - and with over $1 billion in signed contracts across commercial and US government customers, we're mass-producing the highest-power satellite platforms ever built for missions from LEO to deep space. The rise of heavy-lift launch vehicles is shifting the industry from an era of mass constraint to one of mass abundance, and we believe this new era demands a fundamentally different class of spacecraft. Engineered to survive the harshest radiation environments and to fully capitalize on today's and tomorrow's massive rockets, K2 satellites deliver unmatched capability at constellation scale and across multiple orbits. With multiple launches in 2027 and plans to scale to 100 satellites a year, we're Building Bigger - helping develop the solar system and build toward a Kardashev Type II (K2) civilization. If you are a motivated individual who thrives in a fast-paced environment and you're excited about contributing to the success of a high-growth Series D-funded company, we'd love for you to apply. The Role You will play a pivotal role in driving the overall development and integration of our satellite bus for mission success. You will be primarily responsible for successful K2 missions, acting as a deputy program manager internally and with customers. You will work across engineering, production, and business development to deliver reliable flight systems on time. You will own bus-level design integration and champion technical readiness from concept through launch. In this role, you will collaborate with a highly skilled, cross-disciplinary team to develop innovative solutions for complex challenges, ensuring alignment with mission requirements and customer expectations. Our fast-paced, startup environment demands a proactive, adaptable leader who thrives in high-stakes scenarios, navigates ambiguity, and delivers results under aggressive timelines. If you are a self-starter with a passion for innovation in space systems, a drive to solve previously unsolved problems, and a commitment to delivering world class satellite solutions, we want you on our team. Responsibilities Program Leadership: Develop and manage engineering and program schedule, vehicle design, critical performance trades, resource allocation, and mission success Strategic Development: Define bus-level milestones, requirements, and long-term objectives in collaboration with stakeholders Program Execution: Drive engineering and flight readiness activities to meet mission and contract commitments Cross-Functional Integration: Work closely with engineering teams to assess vehicle readiness, manage technical changes, and mitigate risks Systems Development: Establish and improve engineering processes, reviews, and analysis frameworks to support K2 growth Design Reliability: Support internal design reviews and development ensuring adherence to requirements and high reliability Operate effectively in a rapidly evolving startup where agility, autonomy, and proactive problem-solving are essential Qualifications Bachelor's degree in electrical, aerospace, mechanical, computer, or other relevant engineering discipline 6+ years of experience in technical aerospace or manufacturing 3+ years of experience managing projects, technical trades, and/or technical teams Strong understanding of launch vehicles, spacecraft, or other aerospace systems Exceptional written and verbal communication skills Nice to Have Master's degree or PhD in an engineering or science discipline 10+ years of experience in technical aerospace or manufacturing 5+ years of experience managing projects or technical trades Active Top Secret or TS/SCI clearance Experience leading Spacecraft mission design, development, integration, test, and/or launch across multiple departments Proven ability to innovate in process improvement and system architectures Skilled in generating executive summaries to drive decision making through senior leadership discussions Familiarity with contracts and mission requirements evaluations Demonstrated track record of project ownership, responsibility for execution, and successful outcomes Ability to travel up to 25% of the time Compensation and Benefits Base salary range for this role is $175,000 - $200,000 + equity in the company Salary will be based on several factors including, but not limited to: knowledge and skills, education, and experience level Comprehensive benefits package including paid time off, medical/dental/vision coverage, life insurance, paid parental leave, and many other perks If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Building a spacecraft unlike any other requires a team unlike any other and non-traditional career twists and turns are encouraged! If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know. Export Compliance As defined in the ITAR, "U.S. Persons" include U.S. citizens, lawful permanent residents (i.e., Green Card holders), and certain protected individuals (e.g., refugees/asylees, American Samoans). Please consult with a knowledgeable advisor if you are unsure whether you are a "U.S. Person." The person hired for this role will have access to information and items controlled by U.S. export control regulations, including the export control regulations outlined in the International Traffic in Arms Regulation (ITAR). The person hired for this role must therefore either be a "U.S. person" as defined by 22 C.F.R. 120.15 or otherwise eligible for a federally issued export control license. Equal Opportunity K2 Space is an Equal Opportunity Employer; employment with K2 Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Job Description A New Paradigm For Space Operations. Who We Are: Space Kinetic is a dual use space technology startup building a completely new architecture for space operations - one that brings the advantages of proliferated drone technology (low-cost, operationally flexible, attainable, distributed) to space missions while reducing the ecosystem's reliance on consumable fuel. In a world where many companies are focused on incrementally improving the status quo, we are focused on creating something entirely different - an architecture underpinned by new first principles to meet the opportunities and challenges of the third space age head-on. Our goal is to move away from one-to-one space architectures - where each satellite in a constellation has one (or a small # of) primary payloads attached to the bus and unlock a 'one-to-many' system, where each satellite has a large number of payloads which can be deployed from their host spacecraft at high velocities without firing a thruster. This is not a role for someone looking for a traditional 40-hour work week. Space Kinetic is building ambitious, first-of-its-kind technology, and that requires urgency, ownership, and a high level of commitment to changing the foundational assumptions for everything we do in space. What You'll Do: The Principal Guidance, Navigation, and Control (GNC) Engineer will lead the development of an entirely new GNC architecture for Space Kinetic's first-of-its-kind spacecraft platform. You will own the GNC subsystem across its full lifecycle, from early concept development and algorithm design through simulation, hardware integration, verification, and mission operations. You will lead a cross-functional GNC team and collaborate with flight software, systems engineering, test, leadership, and external partners to deliver an integrated hardware and software solution. Job Responsibilities: Lead the GNC team and own the subsystem architecture, development schedule, requirements, interfaces, and technical milestones. Design and implement GNC algorithms for flight software and support their integration into the spacecraft platform. Lead GNC hardware trade studies, component selection, and the integration of internally and externally developed hardware and software. Conduct design analyses, Monte Carlo simulations, and hardware-in-the-loop testing to evaluate and validate system performance. Own subsystem verification and validation activities across simulation, testbed, and flight environments. Develop or contribute to ground tools used for mission and constellation management. Partner with subcontractors, internal teams, and senior leadership while supporting internal and external design reviews. What It Takes: Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or a related technical field. 7+ years of experience developing spacecraft GNC systems. Experience supporting spacecraft or satellite development and operations across the full project lifecycle. Experience developing GNC algorithms, conducting simulations, and performing hardware-in-the-loop testing. Ability to work cross-functionally across spacecraft subsystems and interface directly with commercial or government aerospace customers. Ability to obtain and maintain a U.S. Government security clearance. What We'd Love: Master's degree or PhD in Aerospace Engineering or a related field. Experience with flight software frameworks such as NASA cFS, F', or custom architectures. Familiarity with model-based systems engineering and interface control documentation. Where You'll Be: The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to 20% of the year). What We Offer: Equity-Based Compensation 401(k) retirement plan with a 3.5% company match Highly Competitive PTO Paid company holidays + winter break Comprehensive medical, dental, and vision insurance Unique Performance-based bonus opportunities ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range $195,000-$250,000 USD

Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. NEUTRON Rocket Lab's Neutron team is responsible for bringing our new large rocket Neutron and its launch and test sites to life. From designing and testing Neutron's structures and components, to firing up its new Archimedes engines, to setting up Neutron's launch pads and test sites across the United States, joining the Neutron team is your opportunity to help launch a new large rocket for the very first time. PRINCIPAL STAGE FLUIDS ENGINEER As a Principal Stage Fluids Engineer, Neutron owns the design, build, test, and review of multiple fluid systems across the Neutron launch vehicle. Our team owns all plumbing and systems between the tanks and the engines. Your work within the Fluid Systems department will turn vehicle-level requirements into a fluid network that enables Neutron to operate with aircraft-like reusability and reliability. WHAT YOU'LL GET TO DO Design plumbing systems, components, and their secondary structures. Provide feedback to your peers on their designs, drawings, and methodology. Analyze these systems and components in the harsh and dynamic environments of launch. Review and provide feedback for critical structural analysis of fluid components and systems. Model these systems to characterize and predict system behavior at all conditions. Understand and interpret models of others and work to improve efficacy of modelling. Test and qualify these systems, components, and modules. Manage requirements, realization, and implementation of systems in the larger launch vehicle context. Integrate your hardware into the vehicle. Review data from component, system, and vehicle level testing to optimize and improve future designs. Collaborate with components, propulsion, structures, mechanical, operations, and flight software teams to develop and define vehicle functions. Create tools to enhance the team's analysis capabilities, streamline workflow and optimize launch operations. Set the standard for design, production, and testing processes. Enforce these standards across the program and beyond. Mentor and grow your peers to strengthen the overall team. YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPAL STAGE FLUIDS ENGINEER: Bachelor's degree in Mechanical Engineering or relevant engineering discipline. 12+ years of experience in a hardware rich environment. Experience with fluid components design and usage for valves, pressure vessels, flex elements & fittings. Experience with DfM/DfAM, machining processes, and welding processes with a proven understanding of mechanical drafting and GD&T. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 8+ years of experience in a fast-paced aerospace environment where you have completed difficult projects while collaborating effectively with other key groups. Strong understanding of how to design for classic aerospace constraints: minimizing mass while maintaining manufacturability, function, and low costs. Ability to earn trust, maintain positive professional relationships, & contribute to a culture of inclusion. Experience working with a distributed team across the globe. Advanced degree in a fluid mechanics-heavy field. Experience with oxygen, methane, and/or cryogenic systems. Experience using Siemens NX & Teamcenter. Demonstrated ability to rally a team to make & execute good decisions in a fast-paced environment with limited information. Experience with Aerospace Processes, Standards, and Workflows, from JIRA to AS9100. This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package , giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $211,725-$349,550 USD Base Salary $162,000-$270,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description Job Description Golden, CO (Denver Metro) On-Site Full-Time About Rendezvous Robotics Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles that enable spacecraft that are bigger and more powerful than anything that can be folded to fit into a rocket. We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering, and we're always looking for people who want to build things that matter. The Role We are looking for a Mid to Senior Level Spacecraft Mechanisms Engineer to own the design, analysis, and testing of satellite launch restraint and release systems, tile deployment from the stowed stack, and the load path from that stack into the bus, taking flight hardware from concept through qualification, production, and on-orbit operation. You will own preloaded joint design, release device selection and integration, deployment and separation behavior, the interface to the launch vehicle separation system, and the structural analysis that supports them. You will partner with systems, electrical, avionics, software, manufacturing, test, and outside suppliers. This is a full-time, on-site role in Golden, Colorado, in the Denver metro area. Responsibilities Own launch restraint and release system design, including hold-down and release mechanisms (HDRMs), preload paths, hard point design, and preload retention through the launch environment. Select and integrate vendor-qualified non-explosive actuators (NEAs) and release devices, and qualify them as installed. Design deployment and release mechanisms, including kinematics, energy management, and end of travel behavior. Own tile deployment from the stowed stack, including separation energy. Own the load path from the stowed tile stack and its deployment mechanisms into bus primary structure. Characterize shock environments generated by release devices, including levels at mounted electronics. Perform structural analysis of stowed and deployed configurations, including modal, quasi-static, and random vibration. Develop torque and force margin analysis to a recognized standard. Develop test plans and support deployment, vibration, shock, and thermal vacuum (TVAC) test campaigns, including gravity offload and instrumentation. Engage suppliers, support fabrication processes, and produce and check detailed drawings with geometric dimensioning and tolerancing (GD&T). Required Qualifications Bachelor's degree in Mechanical or Aerospace Engineering or a related field; advanced degree is a plus. 4+ years of spacecraft or satellite mechanism design experience. Demonstrated experience designing spaceflight hardware that has flown, including at least one deployment, launch restraint, or release mechanism. Preloaded joint design experience, including torque and preload relationships, preload retention, and margin against a recognized standard such as NASA-STD-5020. Hands-on deployment, vibration, and shock testing experience. Proficiency with structural finite element analysis (FEA) for modal, quasi-static, and random vibration analysis of stowed and deployed configurations. Experience modeling complex and preloaded joints. Working knowledge of launch and on-orbit load environments, factors of safety, and margin of safety reporting. Strong command of 3D CAD, detailed drawings, tolerance stack-ups, and GD&T (ASME Y14.5). Solid understanding of spaceflight materials, hardware, fabrication techniques, and design for manufacturability. Strong ability to communicate across engineering disciplines to make program-critical decisions. Preferred Qualifications Experience delivering separation systems, deployables, release mechanisms, precision mechanisms, or other moving mechanical assemblies to flight. Experience owning spacecraft primary structure at the bus level, including launch vehicle interface hardware and rideshare accommodation. Experience with stacked or multi-body stowed configurations. Experience designing preloaded joints into sandwich panel structure, including potted inserts, hard points, and compression tubes. Experience with bonded joint design and analysis. Experience characterizing NEA-induced shock, including shock response spectrum analysis. Experience applying torque and force margin methodology per NASA-STD-5017, NASA-STD-5020, or equivalents. Experience designing gravity offload rigs. Familiarity with vacuum tribology, including lubricants, dry film coatings, galling, and cold welding. Familiarity with vibration test notching and force limiting. Familiarity with NASA verification standards, including the General Environmental Verification Standard (GEVS), and/or SMC-S-016. Proficiency with Onshape (SolidWorks, NX, or Creo also valued). Proficiency with industry-standard FEA tools (e.g., Nastran/Femap, ANSYS, Abaqus). Proficiency with Python or MATLAB for analysis and data processing. Hands-on R&D background, including prototyping, testing, and iterating on novel mechanical concepts. Experience in a startup or fast-iteration hardware environment. Compensation and Benefits Engineer: $110,000 to $140,000 Senior Engineer: $140,000 to $170,000 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. In addition to the base salary, you may also be eligible for long-term incentives in the form of stock options. You will receive access to comprehensive medical, vision, and dental coverage, short- and long-term disability insurance, life insurance, and paid parental leave. You may also receive 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. ITAR Requirements To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Opportunity Rendezvous Robotics is an Equal Opportunity Employer. Employment is based on merit, competence, and qualifications, and will not be influenced by race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, or any other legally protected status.