Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
11/14/2026
Full time
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
11/14/2026
Full time
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
Job Description Applications Engineer Location: Midwest, USA Salary Range: $70,000 - $90,000 Become Part of the Revolution If you're looking to join the hottest tech company in the fast-growing 3D printing market, this is the role for you. As an Applications Engineer, you will be working with printer technologies, additive materials, data, and processes that are on the leading edge of the industry. As an Applications Engineer, you will become a technical expert in promoting PostProcess solutions to customers aligning with various print technologies. This will require building relationships with current customers, supporting sales efforts with prospective customers, and continuing to monitor the ever-changing applications developing in the AM industry. At PostProcess, we are driven to provide Exceptional Customer Satisfaction through frequent communication and timely support. As the technical expert in AM applications, you will regularly assist the Sales team with potential customer visits. During these visits, you will be the technical voice for any customer questions as they relate to the PPT solutions or customer applications and parts. These parts will span the full range of the manufacturing sector, from automotive to aerospace and medical. The AE will conduct this effort for both the PPT Territory Business Development Managers (TBDMs) and Channel Partner Sales teams. After the sale, Applications Engineering will oversee the installation process. This will include certifying technicians, maintenance staff, and manufacturing personnel that will utilize our comprehensive solution (software, hardware, chemistry). Applications Engineering will have responsibility for the maintenance and repair of previously installed equipment either under warranty or with customers that have purchased a Service Contract. Exceptional customer service during the contract period will help us achieve our aggressive Service Contract renewal rate. Our technologies are constantly evolving along with the needs and requirements of our expanding customer base. Applications Engineers at PostProcess Technologies will be at the front line, determining what these needs are, and playing a vital role in the growth of both the company and the industry of Additive Manufacturing. Duties and Responsibilities The essential functions of the position include, but are not limited to, the following: Work with customers to understand their applications and how PostProcess Technologies solutions will work for those applications. Provide application-specific details to FINISH3D for processing benchmarks from the customer. Nurture and maintain trusted-advisor customer relationships beginning with the Benchmark process, through headquarter visits, site inspection, equipment installation, and continued post-sale support, resulting in exceptional customer satisfaction. Spend notable time in Buffalo learning/understanding the technology and performing tasks including supporting the Benchmark process and becoming fully knowledgeable on how our Hardware, Software and Chemistry (media and detergents) all work together to achieve optimal post-print results across all additive manufacturing technologies from thermoplastics, photopolymers, and metals. Establish and maintain regular post-sale communication with each assigned customer to ensure equipment is being fully utilized and generating regular consumable sales. Assist in the development of training materials, user guides, and maintenance procedures used both for customers and PPT employees as initial training tools and continued education. Work directly with the Sales Team to identify Key Opportunities with existing and potential customers Serve as the technical "voice of the customer" liaison between the customer and FINISH3D to promote continuous improvement activities in Hardware, Software, and Chemistry development. Regularly update FINISH3D of new or advanced additive materials, processes, and customer applications and make recommendations for product improvements and or new product developments to ensure PostProcess Technologies maintains its position as the leading market innovator. Perform pre-delivery customer site inspections to ensure all installation requirements are or will be met upon delivery of the equipment, providing for seamless equipment installation and immediate customer utilization. Install and integrate PPT solutions at customer's facilities resulting in exceptional customer satisfaction. Administer Site Acceptance Testing (SAT) and maintain thorough and accurate documentation throughout the entire process. Extensive US travel is required. Maintain availability and flexibility for on-call and on-site customer support. Attend trade shows and other significant customer events. Skills and Qualifications Ability to communicate clearly and professionally with strong written and verbal skills. Focus on customer service leading to exceptional customer satisfaction. Understanding of Additive Manufacturing technologies and as a process. Process development, improvement, and implementation. Working knowledge of surface quality including mechanical and chemical treatments for improvement. Ability to write case studies and white papers in support of PostProcess applications. Troubleshooting various types of machinery. Education and Experience Bachelor's Degree in a technical field and 3-5 years relevant experience, or an acceptable combination of both Leadership or management experience preferred Experience using CRM programs such as NetSuite Must hold a valid driver's license Preferred: Security Clearance Desired Attributes Strong Work Ethic Optimistic Problem Solver Team Player - willing to roll up the sleeves and be a utility infielder as required Accountable & Dependable - consistently "Does What They Say They're Going To Do" Resourceful - consistently gets the important things done with limited direction Self-motivated Strong Attention to Detail Trustworthy & Honest High Sense of Urgency Well Organized Quick Learner Seeks Team and Company Success Over Self-Promotion
11/14/2026
Full time
Job Description Applications Engineer Location: Midwest, USA Salary Range: $70,000 - $90,000 Become Part of the Revolution If you're looking to join the hottest tech company in the fast-growing 3D printing market, this is the role for you. As an Applications Engineer, you will be working with printer technologies, additive materials, data, and processes that are on the leading edge of the industry. As an Applications Engineer, you will become a technical expert in promoting PostProcess solutions to customers aligning with various print technologies. This will require building relationships with current customers, supporting sales efforts with prospective customers, and continuing to monitor the ever-changing applications developing in the AM industry. At PostProcess, we are driven to provide Exceptional Customer Satisfaction through frequent communication and timely support. As the technical expert in AM applications, you will regularly assist the Sales team with potential customer visits. During these visits, you will be the technical voice for any customer questions as they relate to the PPT solutions or customer applications and parts. These parts will span the full range of the manufacturing sector, from automotive to aerospace and medical. The AE will conduct this effort for both the PPT Territory Business Development Managers (TBDMs) and Channel Partner Sales teams. After the sale, Applications Engineering will oversee the installation process. This will include certifying technicians, maintenance staff, and manufacturing personnel that will utilize our comprehensive solution (software, hardware, chemistry). Applications Engineering will have responsibility for the maintenance and repair of previously installed equipment either under warranty or with customers that have purchased a Service Contract. Exceptional customer service during the contract period will help us achieve our aggressive Service Contract renewal rate. Our technologies are constantly evolving along with the needs and requirements of our expanding customer base. Applications Engineers at PostProcess Technologies will be at the front line, determining what these needs are, and playing a vital role in the growth of both the company and the industry of Additive Manufacturing. Duties and Responsibilities The essential functions of the position include, but are not limited to, the following: Work with customers to understand their applications and how PostProcess Technologies solutions will work for those applications. Provide application-specific details to FINISH3D for processing benchmarks from the customer. Nurture and maintain trusted-advisor customer relationships beginning with the Benchmark process, through headquarter visits, site inspection, equipment installation, and continued post-sale support, resulting in exceptional customer satisfaction. Spend notable time in Buffalo learning/understanding the technology and performing tasks including supporting the Benchmark process and becoming fully knowledgeable on how our Hardware, Software and Chemistry (media and detergents) all work together to achieve optimal post-print results across all additive manufacturing technologies from thermoplastics, photopolymers, and metals. Establish and maintain regular post-sale communication with each assigned customer to ensure equipment is being fully utilized and generating regular consumable sales. Assist in the development of training materials, user guides, and maintenance procedures used both for customers and PPT employees as initial training tools and continued education. Work directly with the Sales Team to identify Key Opportunities with existing and potential customers Serve as the technical "voice of the customer" liaison between the customer and FINISH3D to promote continuous improvement activities in Hardware, Software, and Chemistry development. Regularly update FINISH3D of new or advanced additive materials, processes, and customer applications and make recommendations for product improvements and or new product developments to ensure PostProcess Technologies maintains its position as the leading market innovator. Perform pre-delivery customer site inspections to ensure all installation requirements are or will be met upon delivery of the equipment, providing for seamless equipment installation and immediate customer utilization. Install and integrate PPT solutions at customer's facilities resulting in exceptional customer satisfaction. Administer Site Acceptance Testing (SAT) and maintain thorough and accurate documentation throughout the entire process. Extensive US travel is required. Maintain availability and flexibility for on-call and on-site customer support. Attend trade shows and other significant customer events. Skills and Qualifications Ability to communicate clearly and professionally with strong written and verbal skills. Focus on customer service leading to exceptional customer satisfaction. Understanding of Additive Manufacturing technologies and as a process. Process development, improvement, and implementation. Working knowledge of surface quality including mechanical and chemical treatments for improvement. Ability to write case studies and white papers in support of PostProcess applications. Troubleshooting various types of machinery. Education and Experience Bachelor's Degree in a technical field and 3-5 years relevant experience, or an acceptable combination of both Leadership or management experience preferred Experience using CRM programs such as NetSuite Must hold a valid driver's license Preferred: Security Clearance Desired Attributes Strong Work Ethic Optimistic Problem Solver Team Player - willing to roll up the sleeves and be a utility infielder as required Accountable & Dependable - consistently "Does What They Say They're Going To Do" Resourceful - consistently gets the important things done with limited direction Self-motivated Strong Attention to Detail Trustworthy & Honest High Sense of Urgency Well Organized Quick Learner Seeks Team and Company Success Over Self-Promotion
We are a federal IT company on a mission to make customer experience (CX) the center of every government solution. Technology is our Passion. People are our Purpose. We know tech, but we love people. NuAxis is home to thinkers and feelers, engineers and artists. We work hard and support each other along the way. Teamwork is more than just a buzzword for us; it's a state of mind. We believe happy employees do amazing work, so join our team NOW! We are currently seeking a talented and motivated PC Deployment Technician for a Full-Time position. Job Summary: The PC Deployment Technician must perform all duties for the WMATA PC Deployment Team: Imaging, installations, problem resolution, configuration (hardware/software), and Desk Side Support. The Technician will perform diagnostics and repairs and inventory tracking/asset management. Essential Functions: Responds to and diagnoses problems through discussion with users and hands-on assistance. Provides on-site support to end-users on a variety of issues. Identifies, researches, and resolves technical problems. Responds to and closes tickets assigned to PC Deployment/Lifecycle Refresh. Ensures all assigned tickets are updated and moving towards a successful resolution in a manner that meets or exceeds contractual SLAs. Documents, tracks, and monitors all assigned work through tracking systems to ensure a timely resolution. (i.e.: ITSM tool- CA Service Desk, SharePoint, etc.) Provides targeted TIER 2 Support for applications and/or hardware issues that arise during an active WMATA PC Deployment Project Partner with Service Desk), Network Services Team, and the Desktop Engineering Team to resolve issues that may arise during a Lifecycle Refresh Project Provides 1 on 1 Customer Support to users that experience difficulties during a Lifecycle Refresh Project Make recommendations to the Agency Customer to increase efficiency and productivity. Performs Moves, Adds, and Changes Knowledge Requirements: Must possess a High School Diploma or equivalent. Must be able to pass a National Agency Background Investigation to receive a Public Trust Security Clearance. Must possess or obtain within 60 days of employment a Microsoft Office Specialist certification. (i.e.: Microsoft Office Specialist Outlook 2010) Must possess 1-3 years' experience with Deployment Projects requiring base image installation plus individual user-specific software loading. Must possess functional hardware troubleshooting skills and at least mid-level Windows 7/Windows 10 experience. Experience in configuring and deploying Windows 7 and Win 10 using an enterprise-class automated image-based method is preferred. (i.e.: SCCM/PXE, MDT, Ghost, etc.) Experience with Active Directory and SCCM preferred. Must be able to obtain an Original Equipment Manufacturer (OEM) Warranty Repair Certification. Must possess a strong understanding of written technical documentation. Must have excellent attention to detail, organizational and teamwork skills. Must possess excellent time management skills and be able to work effectively alone or as part of a team. Must be able to lift and move equipment weighing up to 50 lbs. Does this opportunity sound like a fit for you? If so, join our talent community and click to apply now Our Profile: We are an IT company with a unique mission-to make people the center of every federal IT solution. Our technologists have always gone the extra mile to help our federal clients succeed. And over the years, we saw a growing disconnect in how federal IT initiatives were built and managed. Time after time, programs failed because the focus was on the tools and products and not the people using them. Learn More NuAxis is an Equal Opportunity Employer. Employment is contingent upon successful completion of a background investigation. Learn More about our Benefits and Culture!
11/14/2026
Full time
We are a federal IT company on a mission to make customer experience (CX) the center of every government solution. Technology is our Passion. People are our Purpose. We know tech, but we love people. NuAxis is home to thinkers and feelers, engineers and artists. We work hard and support each other along the way. Teamwork is more than just a buzzword for us; it's a state of mind. We believe happy employees do amazing work, so join our team NOW! We are currently seeking a talented and motivated PC Deployment Technician for a Full-Time position. Job Summary: The PC Deployment Technician must perform all duties for the WMATA PC Deployment Team: Imaging, installations, problem resolution, configuration (hardware/software), and Desk Side Support. The Technician will perform diagnostics and repairs and inventory tracking/asset management. Essential Functions: Responds to and diagnoses problems through discussion with users and hands-on assistance. Provides on-site support to end-users on a variety of issues. Identifies, researches, and resolves technical problems. Responds to and closes tickets assigned to PC Deployment/Lifecycle Refresh. Ensures all assigned tickets are updated and moving towards a successful resolution in a manner that meets or exceeds contractual SLAs. Documents, tracks, and monitors all assigned work through tracking systems to ensure a timely resolution. (i.e.: ITSM tool- CA Service Desk, SharePoint, etc.) Provides targeted TIER 2 Support for applications and/or hardware issues that arise during an active WMATA PC Deployment Project Partner with Service Desk), Network Services Team, and the Desktop Engineering Team to resolve issues that may arise during a Lifecycle Refresh Project Provides 1 on 1 Customer Support to users that experience difficulties during a Lifecycle Refresh Project Make recommendations to the Agency Customer to increase efficiency and productivity. Performs Moves, Adds, and Changes Knowledge Requirements: Must possess a High School Diploma or equivalent. Must be able to pass a National Agency Background Investigation to receive a Public Trust Security Clearance. Must possess or obtain within 60 days of employment a Microsoft Office Specialist certification. (i.e.: Microsoft Office Specialist Outlook 2010) Must possess 1-3 years' experience with Deployment Projects requiring base image installation plus individual user-specific software loading. Must possess functional hardware troubleshooting skills and at least mid-level Windows 7/Windows 10 experience. Experience in configuring and deploying Windows 7 and Win 10 using an enterprise-class automated image-based method is preferred. (i.e.: SCCM/PXE, MDT, Ghost, etc.) Experience with Active Directory and SCCM preferred. Must be able to obtain an Original Equipment Manufacturer (OEM) Warranty Repair Certification. Must possess a strong understanding of written technical documentation. Must have excellent attention to detail, organizational and teamwork skills. Must possess excellent time management skills and be able to work effectively alone or as part of a team. Must be able to lift and move equipment weighing up to 50 lbs. Does this opportunity sound like a fit for you? If so, join our talent community and click to apply now Our Profile: We are an IT company with a unique mission-to make people the center of every federal IT solution. Our technologists have always gone the extra mile to help our federal clients succeed. And over the years, we saw a growing disconnect in how federal IT initiatives were built and managed. Time after time, programs failed because the focus was on the tools and products and not the people using them. Learn More NuAxis is an Equal Opportunity Employer. Employment is contingent upon successful completion of a background investigation. Learn More about our Benefits and Culture!
Pay Range: $18.00hr - $23.00hr Job Overview: The successful candidate will demonstrate proficiency in Data Analysis & Reporting using MS Office and ITSM tools. The role involves coordinating desktop changes, preparing rollout requests, creating implementation plans, and handling incidents related to desktop environment updates. Responsibilities: Good in Data Analysis & Reporting using MS Office and ITSM tools. Coordinate desktop changes to avoid deployment collisions. Prepare requests for rollout and prioritize change requests. Create rollout plans for change requests. Coordinate the implementation process, keep track of requests, and make sure they are implemented as planned. Participate in incident handling concerning desktop changes. Participate in projects concerning bigger desktop changes, for example rollout of new antivirus. Maintain Microsoft environment knowledge (desktop & server) with a good technical understanding of the products building up a desktop service. Apply experience from the desktop environment and understanding of the change management process. Technical Requirements: Phone support experience necessary. Technical Service desk or technical call center experience is necessary. Disciplined, systematic problem-solving skills required. Experience with Windows Operating systems for Clients (Windows XP, Windows 10) and Servers (Windows 2008/2012/2016). Knowledge of Active Directory. Experience with ITSM ticketing tools such as ServiceNow, Remedy, HP Service Center, and Peregrine Service Center. Proficiency with remote desktop connectivity applications like TeamViewer, SMS, Bomgar, WebEx, Live Meeting, and Windows Native tools. Proficiency with MS Office Suite including MS Word, MS Excel, MS PowerPoint, MS Outlook, MS Project, and MS Visio. Support for Internet browsers (e.g. Explorer, Chrome, Firefox), VPN, and remote dial-in users. Support for laptops, desktops, and printers of all models. PDA and BlackBerry support. Experience with Adobe Acrobat and other common desktop applications like WinZip. Must Have Skills: AMT Asset Management Software. Desk Side Services. Mac Hardware Management. Hardware Asset Management. Hardware Management - Printers. Windows PC. Certifications: MCP/MSCE/MSCA/A+ or HDI CSS or Cisco certification. ITIL knowledge of V2 or V3, especially on Service Desk, Incident, Problem, and Change Management, is preferred. Soft Skills: Excellent communication and conversation skills (verbal and written). Good documentation skills and good working knowledge of MS Office (including MS Project and Visio). Great customer handling skills with the ability to handle unforeseen situations. High level of acceptance. Ability to drive organizational values and methodology. Other Skills / Experience: Ability to successfully provide hardware/software/network problem analysis and resolution support over the phone. Personal dedication to providing high quality, superior service at all times, with an ability to finish tasks. Ability to integrate as a cross-functional team player in a fast-paced environment where information is shared. Ability to learn new information quickly. Ability to work flexible hours from time to time to cover for other Service desk staff and to be on call via pager during the week. Strong focus on Customer Focus, Teamwork, Technical Expertise, Interpersonal Effectiveness, and Concern for Order and Quality. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $18.00hr - $23.00hr Job Overview: The successful candidate will demonstrate proficiency in Data Analysis & Reporting using MS Office and ITSM tools. The role involves coordinating desktop changes, preparing rollout requests, creating implementation plans, and handling incidents related to desktop environment updates. Responsibilities: Good in Data Analysis & Reporting using MS Office and ITSM tools. Coordinate desktop changes to avoid deployment collisions. Prepare requests for rollout and prioritize change requests. Create rollout plans for change requests. Coordinate the implementation process, keep track of requests, and make sure they are implemented as planned. Participate in incident handling concerning desktop changes. Participate in projects concerning bigger desktop changes, for example rollout of new antivirus. Maintain Microsoft environment knowledge (desktop & server) with a good technical understanding of the products building up a desktop service. Apply experience from the desktop environment and understanding of the change management process. Technical Requirements: Phone support experience necessary. Technical Service desk or technical call center experience is necessary. Disciplined, systematic problem-solving skills required. Experience with Windows Operating systems for Clients (Windows XP, Windows 10) and Servers (Windows 2008/2012/2016). Knowledge of Active Directory. Experience with ITSM ticketing tools such as ServiceNow, Remedy, HP Service Center, and Peregrine Service Center. Proficiency with remote desktop connectivity applications like TeamViewer, SMS, Bomgar, WebEx, Live Meeting, and Windows Native tools. Proficiency with MS Office Suite including MS Word, MS Excel, MS PowerPoint, MS Outlook, MS Project, and MS Visio. Support for Internet browsers (e.g. Explorer, Chrome, Firefox), VPN, and remote dial-in users. Support for laptops, desktops, and printers of all models. PDA and BlackBerry support. Experience with Adobe Acrobat and other common desktop applications like WinZip. Must Have Skills: AMT Asset Management Software. Desk Side Services. Mac Hardware Management. Hardware Asset Management. Hardware Management - Printers. Windows PC. Certifications: MCP/MSCE/MSCA/A+ or HDI CSS or Cisco certification. ITIL knowledge of V2 or V3, especially on Service Desk, Incident, Problem, and Change Management, is preferred. Soft Skills: Excellent communication and conversation skills (verbal and written). Good documentation skills and good working knowledge of MS Office (including MS Project and Visio). Great customer handling skills with the ability to handle unforeseen situations. High level of acceptance. Ability to drive organizational values and methodology. Other Skills / Experience: Ability to successfully provide hardware/software/network problem analysis and resolution support over the phone. Personal dedication to providing high quality, superior service at all times, with an ability to finish tasks. Ability to integrate as a cross-functional team player in a fast-paced environment where information is shared. Ability to learn new information quickly. Ability to work flexible hours from time to time to cover for other Service desk staff and to be on call via pager during the week. Strong focus on Customer Focus, Teamwork, Technical Expertise, Interpersonal Effectiveness, and Concern for Order and Quality. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Key Responsibilities Provide Level 1 technical support for faculty, staff, and students. Troubleshoot Windows computers, laptops, Chromebooks, printers, and classroom technology. Assist with Microsoft 365 applications, including Outlook, Teams, Word, and Excel. Support user account creation, password resets, and basic Active Directory/Microsoft Entra ID administration. Troubleshoot basic network connectivity, Wi-Fi, and internet access issues. Install, configure, and maintain computers, software, and peripherals. Support classroom technology, including interactive displays, projectors, and audiovisual equipment. Document technical issues, troubleshooting steps, and resolutions in the helpdesk ticketing system. Assist with device deployment, inventory management, and equipment replacement. Escalate complex technical issues to senior IT personnel when necessary. Follow established cybersecurity policies and help protect sensitive student and staff information. Assist with school events requiring technology or audiovisual support.
11/14/2026
Full time
Key Responsibilities Provide Level 1 technical support for faculty, staff, and students. Troubleshoot Windows computers, laptops, Chromebooks, printers, and classroom technology. Assist with Microsoft 365 applications, including Outlook, Teams, Word, and Excel. Support user account creation, password resets, and basic Active Directory/Microsoft Entra ID administration. Troubleshoot basic network connectivity, Wi-Fi, and internet access issues. Install, configure, and maintain computers, software, and peripherals. Support classroom technology, including interactive displays, projectors, and audiovisual equipment. Document technical issues, troubleshooting steps, and resolutions in the helpdesk ticketing system. Assist with device deployment, inventory management, and equipment replacement. Escalate complex technical issues to senior IT personnel when necessary. Follow established cybersecurity policies and help protect sensitive student and staff information. Assist with school events requiring technology or audiovisual support.
Bilingual Spanish/English This position is open to candidates in the Metro Detroit, Michigan area, or the Roswell, Georgia area. The position will require up to 3 weeks of on site training, then will transition into a hybrid role. Once training concludes, expect 2/3 days per week on site. This is Provide professional end-user support via telephone, email or web submits. Provide restorative or maintenance actions to resolve end-user problems. Responds to end-user problems based on standard procedures. Track incidents and calls, including but not limited to, entering data into the database timely and accurately. Ticket Dispatcher - Responsible in distributing tickets in the queue and checking ageing tickets. Process P1/P2 tickets - Issue that needs immediate assistance Bachelor's degree or vocational in IT-related courses is a plus. Minimum of completed two (2) years in college or has finished a Diploma/Certificate course. Must have at least 2 years Technical Support experience Excellent in oral and written English communication. Excellent customer service skills. Must consistently meet or exceed the required performance criteria. Able and willing to make several calls a day when necessary. Familiarity and good working knowledge in PC hardware and software troubleshooting. Prior Software Application support (e.g. Outlook, etc.) experience is a plus. Prior BPO experience in Technical Support is a plus. Familiarity with ticketing system, a strong advantage. Shift flexibility and schedule adherence are required for the position. TECHNICAL SUMMARY Software Hardware Active Directory Dell Okta HP Citrix Cisco Meraki Office365 Verifone Payment Devices ServiceNow Samsung Webex Teams Apple Webex Meetings 8x8 VoIP Phones Workday Polycom Adobe Yealink PowerBI Honeywell Salesforce WorkspaceONE (Airwatch) InTune Android iOS
11/14/2026
Full time
Bilingual Spanish/English This position is open to candidates in the Metro Detroit, Michigan area, or the Roswell, Georgia area. The position will require up to 3 weeks of on site training, then will transition into a hybrid role. Once training concludes, expect 2/3 days per week on site. This is Provide professional end-user support via telephone, email or web submits. Provide restorative or maintenance actions to resolve end-user problems. Responds to end-user problems based on standard procedures. Track incidents and calls, including but not limited to, entering data into the database timely and accurately. Ticket Dispatcher - Responsible in distributing tickets in the queue and checking ageing tickets. Process P1/P2 tickets - Issue that needs immediate assistance Bachelor's degree or vocational in IT-related courses is a plus. Minimum of completed two (2) years in college or has finished a Diploma/Certificate course. Must have at least 2 years Technical Support experience Excellent in oral and written English communication. Excellent customer service skills. Must consistently meet or exceed the required performance criteria. Able and willing to make several calls a day when necessary. Familiarity and good working knowledge in PC hardware and software troubleshooting. Prior Software Application support (e.g. Outlook, etc.) experience is a plus. Prior BPO experience in Technical Support is a plus. Familiarity with ticketing system, a strong advantage. Shift flexibility and schedule adherence are required for the position. TECHNICAL SUMMARY Software Hardware Active Directory Dell Okta HP Citrix Cisco Meraki Office365 Verifone Payment Devices ServiceNow Samsung Webex Teams Apple Webex Meetings 8x8 VoIP Phones Workday Polycom Adobe Yealink PowerBI Honeywell Salesforce WorkspaceONE (Airwatch) InTune Android iOS
This position is open to candidates in the Metro Detroit, Michigan area, or the Roswell, Georgia area. It requires up to 3 weeks of on site training and will transition into a hybrid position spending 2/3 days per week on site. Provide professional end-user support via telephone, email or web submits. Provide restorative or maintenance actions to resolve end-user problems. Responds to end-user problems based on standard procedures. Track incidents and calls, including but not limited to, entering data into the database timely and accurately. Ticket Dispatcher - Responsible in distributing tickets in the queue and checking ageing tickets. Process P1/P2 tickets - Issue that needs immediate assistance Bachelor's degree or vocational in IT-related courses is a plus. Minimum of completed two (2) years in college or has finished a Diploma/Certificate course. Must have at least 2+ years Technical Support experience Excellent in oral and written English communication. Excellent customer service skills. Must consistently meet or exceed the required performance criteria. Able and willing to make several calls a day when necessary. Familiarity and good working knowledge in PC hardware and software troubleshooting. Prior Software Application support (e.g. Outlook, etc.) experience is a plus. Prior BPO experience in Technical Support is a plus. Familiarity with ticketing system, a strong advantage. Shift flexibility and schedule adherence are required for the position. TECHNICAL SUMMARY Software Hardware Active Directory Dell Okta HP Citrix Cisco Meraki Office365 Verifone Payment Devices ServiceNow Samsung Webex Teams Apple Webex Meetings 8x8 VoIP Phones Workday Polycom Adobe Yealink PowerBI Honeywell Salesforce WorkspaceONE (Airwatch) InTune Android iOS
11/14/2026
Full time
This position is open to candidates in the Metro Detroit, Michigan area, or the Roswell, Georgia area. It requires up to 3 weeks of on site training and will transition into a hybrid position spending 2/3 days per week on site. Provide professional end-user support via telephone, email or web submits. Provide restorative or maintenance actions to resolve end-user problems. Responds to end-user problems based on standard procedures. Track incidents and calls, including but not limited to, entering data into the database timely and accurately. Ticket Dispatcher - Responsible in distributing tickets in the queue and checking ageing tickets. Process P1/P2 tickets - Issue that needs immediate assistance Bachelor's degree or vocational in IT-related courses is a plus. Minimum of completed two (2) years in college or has finished a Diploma/Certificate course. Must have at least 2+ years Technical Support experience Excellent in oral and written English communication. Excellent customer service skills. Must consistently meet or exceed the required performance criteria. Able and willing to make several calls a day when necessary. Familiarity and good working knowledge in PC hardware and software troubleshooting. Prior Software Application support (e.g. Outlook, etc.) experience is a plus. Prior BPO experience in Technical Support is a plus. Familiarity with ticketing system, a strong advantage. Shift flexibility and schedule adherence are required for the position. TECHNICAL SUMMARY Software Hardware Active Directory Dell Okta HP Citrix Cisco Meraki Office365 Verifone Payment Devices ServiceNow Samsung Webex Teams Apple Webex Meetings 8x8 VoIP Phones Workday Polycom Adobe Yealink PowerBI Honeywell Salesforce WorkspaceONE (Airwatch) InTune Android iOS
Who we are Stefanini is a full service global provider of offshore, onshore and nearshore IT services, including application development and outsourcing services, IT infrastructure outsourcing (help desk support and desktop services), systems integration, consulting and strategic staffing to Fortune 1000 enterprises around the world. We have over 25,000 employees across 77 offices in 40 countries across the Americas, Europe, Africa, Australia, and Asia. What will you do? Provide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the NetworkProvide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the Network What do you need to succeed? 3+ years corporate desk side support experience with strong emphasis supporting Windows 7 and Windows 10 Experience troubleshooting and replacing hardware on Lenovo PCs Experience using Active Directory Experience supporting Microsoft Office 2007, Microsoft Office 2016 including MS Lync, Microsoft Outlook Web Application (OWA) and the Outlook 2016 client Experience troubleshooting wireless connectivity issues Quality Customer Service skills VPN experience. Experience with basic hardware printer support Experience with Symantec productions including Endpoint Protection, Bitlocker, SCCM, and RDP What you'll get Work with brilliant minds, often within a global capacity; Comprehensive Benefits package that includes 401(k), paid time off, tuition reimbursement, medical, dental and vision insurance, and much more; Opportunity to participate in professional development eLearning programs within the Stefanini University, and other virtual trainings as well. Why we're different Brazilian and privately owned company; Agility, flexibility, and innovation are in our DNA; Flat organizational structure which enables faster communication and decision making. What do you need to succeed? 1+ years corporate desk side support experience with strong emphasis supporting Windows 7 and Windows 10 Experience troubleshooting and replacing hardware on Lenovo PCs Experience using Active Directory Experience supporting Microsoft Office 2007, Microsoft Office 2016 including MS Lync, Microsoft Outlook Web Application (OWA) and the Outlook 2016 client Experience troubleshooting wireless connectivity issues Quality Customer Service skills VPN experience. Experience with basic hardware printer support Experience with Symantec productions including Endpoint Protection, Bitlocker, SCCM, and RDP
11/14/2026
Full time
Who we are Stefanini is a full service global provider of offshore, onshore and nearshore IT services, including application development and outsourcing services, IT infrastructure outsourcing (help desk support and desktop services), systems integration, consulting and strategic staffing to Fortune 1000 enterprises around the world. We have over 25,000 employees across 77 offices in 40 countries across the Americas, Europe, Africa, Australia, and Asia. What will you do? Provide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the NetworkProvide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the Network What do you need to succeed? 3+ years corporate desk side support experience with strong emphasis supporting Windows 7 and Windows 10 Experience troubleshooting and replacing hardware on Lenovo PCs Experience using Active Directory Experience supporting Microsoft Office 2007, Microsoft Office 2016 including MS Lync, Microsoft Outlook Web Application (OWA) and the Outlook 2016 client Experience troubleshooting wireless connectivity issues Quality Customer Service skills VPN experience. Experience with basic hardware printer support Experience with Symantec productions including Endpoint Protection, Bitlocker, SCCM, and RDP What you'll get Work with brilliant minds, often within a global capacity; Comprehensive Benefits package that includes 401(k), paid time off, tuition reimbursement, medical, dental and vision insurance, and much more; Opportunity to participate in professional development eLearning programs within the Stefanini University, and other virtual trainings as well. Why we're different Brazilian and privately owned company; Agility, flexibility, and innovation are in our DNA; Flat organizational structure which enables faster communication and decision making. What do you need to succeed? 1+ years corporate desk side support experience with strong emphasis supporting Windows 7 and Windows 10 Experience troubleshooting and replacing hardware on Lenovo PCs Experience using Active Directory Experience supporting Microsoft Office 2007, Microsoft Office 2016 including MS Lync, Microsoft Outlook Web Application (OWA) and the Outlook 2016 client Experience troubleshooting wireless connectivity issues Quality Customer Service skills VPN experience. Experience with basic hardware printer support Experience with Symantec productions including Endpoint Protection, Bitlocker, SCCM, and RDP
Who we are For 35+ years, Stefanini has been helping midsize, large and global enterprises increase the efficiency of their IT operations while also helping them leverage information technology to empower their businesses. Our offers include efficient, cost-reducing and effective services (IT Infrastructure Outsourcing, End-User Computing Outsourcing, Application Managed Services, and Mainframe Modernization). With robust offerings aligned with market trends such as automation, cloud, Internet of Things (IoT) and user experience (UX), the company has been recognized with several awards in the area of innovation. Today, the company has a broad portfolio of solutions that combine innovative consulting, marketing, mobility, personalized campaigns and artificial intelligence services for traditional solutions such as service desk, field service and outsourcing (BPO). We have over 30,000 employees across 77 offices in 41 countries across the Americas, Europe, Africa, Australia, and Asia. Job Description Provide Windows, software, and hardware support, onsite in a corporate environment Stage, provision, and deploy IT machines to end users following best business practices Configure, troubleshoot, and deploy mobile devices & other audio/ visual equipment Troubleshoot VPN and VDI connectivity Follow appropriate KB articles Manage workload via ticketing software or Non-ticket Tracker Prioritize and complete work in a group and independently with minimal supervision Communicate technical information to non-technical audiences Smart Hands remote support for offsite resolver groups Inventory management of IT assets including asset auditing Other duties as assigned Requirements 1 year onsite or helpdesk support or equivalent experience Excellent troubleshooting capability Ability to maintain composure while handling challenging, dynamic, rapid-response support Experience with Microsoft Office/ Office 365 suite Ability to walk, bend, stand for prolonged periods of time, and lift equipment up to 50 pounds Maintain neat and professional work area and appearance in compliance with site policies Demonstrate a high level of professionalism and strong personal interaction skills High School Diploma or equivalent Maintain valid driver's license Ability to pass standard panel drug screening and background check Adhere to assigned shift schedule What you'll get Work with brilliant minds, often within a global capacity Comprehensive Benefits package that includes 401(k), paid time off, tuition reimbursement, medical, dental and vision insurance, and much more; Opportunity to participate in professional development eLearning programs within the Stefanini University, and other virtual training as well. Why we're different Brazilian and privately owned company; Agility, flexibility, and innovation are in our DNA; Flat organizational structure which enables faster communication and decision making;
11/14/2026
Full time
Who we are For 35+ years, Stefanini has been helping midsize, large and global enterprises increase the efficiency of their IT operations while also helping them leverage information technology to empower their businesses. Our offers include efficient, cost-reducing and effective services (IT Infrastructure Outsourcing, End-User Computing Outsourcing, Application Managed Services, and Mainframe Modernization). With robust offerings aligned with market trends such as automation, cloud, Internet of Things (IoT) and user experience (UX), the company has been recognized with several awards in the area of innovation. Today, the company has a broad portfolio of solutions that combine innovative consulting, marketing, mobility, personalized campaigns and artificial intelligence services for traditional solutions such as service desk, field service and outsourcing (BPO). We have over 30,000 employees across 77 offices in 41 countries across the Americas, Europe, Africa, Australia, and Asia. Job Description Provide Windows, software, and hardware support, onsite in a corporate environment Stage, provision, and deploy IT machines to end users following best business practices Configure, troubleshoot, and deploy mobile devices & other audio/ visual equipment Troubleshoot VPN and VDI connectivity Follow appropriate KB articles Manage workload via ticketing software or Non-ticket Tracker Prioritize and complete work in a group and independently with minimal supervision Communicate technical information to non-technical audiences Smart Hands remote support for offsite resolver groups Inventory management of IT assets including asset auditing Other duties as assigned Requirements 1 year onsite or helpdesk support or equivalent experience Excellent troubleshooting capability Ability to maintain composure while handling challenging, dynamic, rapid-response support Experience with Microsoft Office/ Office 365 suite Ability to walk, bend, stand for prolonged periods of time, and lift equipment up to 50 pounds Maintain neat and professional work area and appearance in compliance with site policies Demonstrate a high level of professionalism and strong personal interaction skills High School Diploma or equivalent Maintain valid driver's license Ability to pass standard panel drug screening and background check Adhere to assigned shift schedule What you'll get Work with brilliant minds, often within a global capacity Comprehensive Benefits package that includes 401(k), paid time off, tuition reimbursement, medical, dental and vision insurance, and much more; Opportunity to participate in professional development eLearning programs within the Stefanini University, and other virtual training as well. Why we're different Brazilian and privately owned company; Agility, flexibility, and innovation are in our DNA; Flat organizational structure which enables faster communication and decision making;
Job Description South Florida. On-site and field-based, working on boats, at the dock and on the water. Travel regularly for installations, demos and events. 75k-100k depending on experience, plus full benefits. Note: a genuine marine or marine electronics background is a hard requirement. Applications without demonstrable hands-on experience working on vessels will not be considered. SEA.AI builds AI and machine vision systems that give crews an accurate picture of what's around their vessel, deployed on commercial, defence and recreational vessels worldwide. We're expanding our Field Service and Application Engineering team in South Florida. You'll be the technical backbone of our sales activity in the Americas and own the technical delivery of our systems, from demos and sea trials to installation, commissioning and support. You'll sit within our Service department and work closely with Sales, Quality and Product Management. ' Install, commission and troubleshoot our AI machine vision systems onboard commercial, defence and recreational vessels, including elevated and masthead mounting Plan, set up and run live demonstrations, sea trials and customer evaluations, on the water and at trade shows Act as the technical point of contact for the sales team and customers, scoping configurations and supporting pre-sales and post-sales Support integration with onboard equipment, working with shipyards, integrators and partners Provide remote and on-site technical support Manage a pool of demo equipment in the Americas, including logistics, stock and maintenance Feed field issues and product requirements back to R&D, Product Management and Quality Represent SEA.AI at trade shows and industry events (Miami International Boat Show, International WorkBoat Show), staffing the booth and running live demos Hands-on experience working on boats and vessels. This is a hard requirement. We're looking for someone from a marine background (marine electronics installer, shipyard technician, marine electrician, Navy or Coast Guard electronics technician, or similar) Practical experience installing or servicing marine electronics (radar, AIS, ECDIS, VHF, EO/IR cameras, or similar) Comfortable running on-water and trade-show demos and presenting to technical and operational audiences Comfortable working aboard vessels at the dock and underway, and with elevated or masthead installations Working knowledge of marine electrical systems (AC and DC) and marine networking (NMEA, Ethernet) Technical education in electronics, mechatronics, IT or a related field, or equivalent hands-on marine experience Solid hardware, networking and software troubleshooting skills Strong customer-facing and presentation skills Well organized, able to work independently and proactively Willingness to travel frequently Must be legally authorized to work in the United States NMEA 2000 / NMEA 0183 experience, or NMEA installer certification ABYC certification or equivalent marine credentials Experience supporting sales (technical proposals, tender responses, trade-show booths, demos) Familiarity with EO/IR camera systems and embedded hardware Basic IP networking knowledge (IP cameras, switches, routers) Project coordination experience Interest in AI-based technologies Military, Coast Guard or defence-industry background ? 75k-105k depending on experience, skills and qualifications Medical insurance with 100% employer contribution, 20 days PTO, 401(k) with 4% match Work with cutting-edge maritime camera and AI technology Direct impact on customer success and product reliability A team of around 75 across five countries, small enough that what you do here visibly changes the company Travel to our offices in Austria, Germany, France and Portugal, and to customers worldwide
11/14/2026
Full time
Job Description South Florida. On-site and field-based, working on boats, at the dock and on the water. Travel regularly for installations, demos and events. 75k-100k depending on experience, plus full benefits. Note: a genuine marine or marine electronics background is a hard requirement. Applications without demonstrable hands-on experience working on vessels will not be considered. SEA.AI builds AI and machine vision systems that give crews an accurate picture of what's around their vessel, deployed on commercial, defence and recreational vessels worldwide. We're expanding our Field Service and Application Engineering team in South Florida. You'll be the technical backbone of our sales activity in the Americas and own the technical delivery of our systems, from demos and sea trials to installation, commissioning and support. You'll sit within our Service department and work closely with Sales, Quality and Product Management. ' Install, commission and troubleshoot our AI machine vision systems onboard commercial, defence and recreational vessels, including elevated and masthead mounting Plan, set up and run live demonstrations, sea trials and customer evaluations, on the water and at trade shows Act as the technical point of contact for the sales team and customers, scoping configurations and supporting pre-sales and post-sales Support integration with onboard equipment, working with shipyards, integrators and partners Provide remote and on-site technical support Manage a pool of demo equipment in the Americas, including logistics, stock and maintenance Feed field issues and product requirements back to R&D, Product Management and Quality Represent SEA.AI at trade shows and industry events (Miami International Boat Show, International WorkBoat Show), staffing the booth and running live demos Hands-on experience working on boats and vessels. This is a hard requirement. We're looking for someone from a marine background (marine electronics installer, shipyard technician, marine electrician, Navy or Coast Guard electronics technician, or similar) Practical experience installing or servicing marine electronics (radar, AIS, ECDIS, VHF, EO/IR cameras, or similar) Comfortable running on-water and trade-show demos and presenting to technical and operational audiences Comfortable working aboard vessels at the dock and underway, and with elevated or masthead installations Working knowledge of marine electrical systems (AC and DC) and marine networking (NMEA, Ethernet) Technical education in electronics, mechatronics, IT or a related field, or equivalent hands-on marine experience Solid hardware, networking and software troubleshooting skills Strong customer-facing and presentation skills Well organized, able to work independently and proactively Willingness to travel frequently Must be legally authorized to work in the United States NMEA 2000 / NMEA 0183 experience, or NMEA installer certification ABYC certification or equivalent marine credentials Experience supporting sales (technical proposals, tender responses, trade-show booths, demos) Familiarity with EO/IR camera systems and embedded hardware Basic IP networking knowledge (IP cameras, switches, routers) Project coordination experience Interest in AI-based technologies Military, Coast Guard or defence-industry background ? 75k-105k depending on experience, skills and qualifications Medical insurance with 100% employer contribution, 20 days PTO, 401(k) with 4% match Work with cutting-edge maritime camera and AI technology Direct impact on customer success and product reliability A team of around 75 across five countries, small enough that what you do here visibly changes the company Travel to our offices in Austria, Germany, France and Portugal, and to customers worldwide
Job Description Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. The below job opportunity is with one of our clients who is a global information technology company that provides high-performance and industry focused solutions integrated with leading-edge security to clients in government, financial services, and commercial markets. Their offerings include security software and, services, digital transformation and workplace services, industry applications and services, and innovative software operating environments for high intensity enterprise computing. Position: IT Field Computer Technician Location: Fort Collins, CO 80524 Duration: 3 Months Job Type: Temporary Assignment Work Type: Driving Pay Rate: $22.00/h to $24.00/hr. Job Description: Key Responsibilities: As a Client Field/Computer Technician, you will be assigned service requests to repair Laptops and Desktops in the metro area. Your assignments will include repair activities such as replacing hard drives, motherboards and keyboards. You may also perform whole unit swaps, repair or replace PC peripherals. Must have reliable transportation as this role services the metro and surrounding areas. Close service tickets in real time in the Client Call Management system using Company provided phone. Key Qualifications: 1+ Years of hands-on experience with laptop and desktop break-fix. Computer-building background experience preferred. General knowledge of laptop/desktop hardware and software including basic knowledge of Microsoft applications. Ability to resolve basic/non-complex problems as directed. TekWissen Group is an equal opportunity employer supporting workforce diversity.
11/14/2026
Full time
Job Description Overview: TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide. The below job opportunity is with one of our clients who is a global information technology company that provides high-performance and industry focused solutions integrated with leading-edge security to clients in government, financial services, and commercial markets. Their offerings include security software and, services, digital transformation and workplace services, industry applications and services, and innovative software operating environments for high intensity enterprise computing. Position: IT Field Computer Technician Location: Fort Collins, CO 80524 Duration: 3 Months Job Type: Temporary Assignment Work Type: Driving Pay Rate: $22.00/h to $24.00/hr. Job Description: Key Responsibilities: As a Client Field/Computer Technician, you will be assigned service requests to repair Laptops and Desktops in the metro area. Your assignments will include repair activities such as replacing hard drives, motherboards and keyboards. You may also perform whole unit swaps, repair or replace PC peripherals. Must have reliable transportation as this role services the metro and surrounding areas. Close service tickets in real time in the Client Call Management system using Company provided phone. Key Qualifications: 1+ Years of hands-on experience with laptop and desktop break-fix. Computer-building background experience preferred. General knowledge of laptop/desktop hardware and software including basic knowledge of Microsoft applications. Ability to resolve basic/non-complex problems as directed. TekWissen Group is an equal opportunity employer supporting workforce diversity.
Who we are Stefanini is a full service global provider of offshore, onshore and nearshore IT services, including application development and outsourcing services, IT infrastructure outsourcing (help desk support and desktop services), systems integration, consulting and strategic staffing to Fortune 1000 enterprises around the world. We have over 25,000 employees across 77 offices in 40 countries across the Americas, Europe, Africa, Australia, and Asia. What will you do? Provide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the NetworkProvide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the Network Position performing client-site servicing, repair, and/or installation of company product(s). This job may include any aspect of product field support, including system hardware and software, and systems networking. Developed knowledge and skills through formal training and considerable work experience. Works on assignments that are semi-routine in nature but recognizes the need for occasional deviation from the accepted practice. Attendance and schedule adherence are requirements of this position. Providing hardware/software support services to on-site clients, including break/fix.Implementing virus detection and eradication procedures.Diagnosing end-user system failures and implementing repair solutions.Diagnosing printer and other peripheral device failures and implementing repair solutions.Troubleshooting network devices to ensure connectivity from the PC to the Network.Providing installation and upgrading services for hardware and software.Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs. Setup and troubleshooting audio/video equipment such as projectors and video conference equipment
11/14/2026
Full time
Who we are Stefanini is a full service global provider of offshore, onshore and nearshore IT services, including application development and outsourcing services, IT infrastructure outsourcing (help desk support and desktop services), systems integration, consulting and strategic staffing to Fortune 1000 enterprises around the world. We have over 25,000 employees across 77 offices in 40 countries across the Americas, Europe, Africa, Australia, and Asia. What will you do? Provide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the NetworkProvide hardware/software support services to onsite client including break/fixImplement virus detection and eradication proceduresDiagnose end-user system failures and implement repair solutionsDiagnose printer and other peripheral devise failures and implement repair solutionsTroubleshoot network devices in order to ensure connectivity from the PC to the Network Position performing client-site servicing, repair, and/or installation of company product(s). This job may include any aspect of product field support, including system hardware and software, and systems networking. Developed knowledge and skills through formal training and considerable work experience. Works on assignments that are semi-routine in nature but recognizes the need for occasional deviation from the accepted practice. Attendance and schedule adherence are requirements of this position. Providing hardware/software support services to on-site clients, including break/fix.Implementing virus detection and eradication procedures.Diagnosing end-user system failures and implementing repair solutions.Diagnosing printer and other peripheral device failures and implementing repair solutions.Troubleshooting network devices to ensure connectivity from the PC to the Network.Providing installation and upgrading services for hardware and software.Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs. Setup and troubleshooting audio/video equipment such as projectors and video conference equipment
Ken's Foods is a family owned business that takes pride in its roots. Ken's Foods, Inc was incorporated in 1958, and currently has plant operations in Marlborough, Massachusetts, McDonough, Georgia, Las Vegas, Nevada, and Lebanon, Indiana. In addition, Ken's employs over 1000 employees nationally. To this day, Ken's is still owned by the same family, as they continue their tradition of flavor obsession. Joining Ken's Foods is becoming part of an enthusiastic team. Whether you're in our state-of-the-art facilities or in our corporate headquarters, you'll enjoy a warm company culture and get all the tools you will need to succeed in your career. SUMMARY The Automation Engineer will support our Corporate Engineering team with Manufacturing Systems Controls Design and Support. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Development, integration, and maintenance of manufacturing equipment controls systems, manufacturing systems automation, industrial electrical maintenance and design, and human-machine interfaces, and industrial communications networks under the direction of senior corporate engineers and integrators. Must have experience with Ignition. Experience with some of the following is strongly desired: Rockwell RSLogix 5, 500, 5000, Studio Rockwell RS View, Factory Talk Studio Inductive Automation Ignition. Must have experience with Ignition. Rockwell PowerFlex Variable Frequency Drives Rockwell Point IO and Flex IO systems Industrial electrical panels and wiring Exposure and understanding of the following are beneficial: Industrial flow meters, temperature probes, level sensors, photoeyes, and solenoid valves Wonderware InTouch, InBatch Microsoft SQL AutoCAD VMWare Workstation Player and vSphere Programming (C++, Visual Basic, Java, Python, etc.) Cisco networking hardware Fanuc Robotic Application Must be available to travel to all Facilities to assist with project work and start-ups. Work with site Control Technicians for troubleshooting, training, and start-ups. Develop and foster strong relationships with Plant Operation team to evolve current systems architecture and maximize manufacturing efficiencies and output. Job requires interaction with plant personnel both hourly and salary. Good people management skills, Customer focused personality and approach are a must. Support local Operations needs for electrical and automation system support. Create written instructions for local Maintenance department for automation systems Commitment to safety begins with management. Managers and frontline supervisors are accountable for creating and maintaining a culture of Safety and assuring a safe work environment. Education and/or Experience Bachelor's degree (B. S.) from four-year College or university in software engineering, electrical engineering, or related discipline. 4+ years' experience with industrial control systems. SKILLS AND ABILITIES Good understanding of industrial automation programming concepts Strong understanding of electrical concepts and theories Understanding of computer WAN and LAN networks Ability to work and manage time independently Ability to quickly learn about new software, hardware, and automation equipment and effectively implement it The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $90k-110K annually. At this time, we are not able to consider candidates who require, or may require, current or future visa sponsorship. This may include, but is not limited to, candidates in F-1/OPT, CPT, H-1B, TN, E-3, H-4 EAD, or similar temporary work-authorized visa statuses. Employment with Ken's Foods is contingent upon successful completion of a drug test, background screening, and pre-employment assessment.
11/14/2026
Full time
Ken's Foods is a family owned business that takes pride in its roots. Ken's Foods, Inc was incorporated in 1958, and currently has plant operations in Marlborough, Massachusetts, McDonough, Georgia, Las Vegas, Nevada, and Lebanon, Indiana. In addition, Ken's employs over 1000 employees nationally. To this day, Ken's is still owned by the same family, as they continue their tradition of flavor obsession. Joining Ken's Foods is becoming part of an enthusiastic team. Whether you're in our state-of-the-art facilities or in our corporate headquarters, you'll enjoy a warm company culture and get all the tools you will need to succeed in your career. SUMMARY The Automation Engineer will support our Corporate Engineering team with Manufacturing Systems Controls Design and Support. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Development, integration, and maintenance of manufacturing equipment controls systems, manufacturing systems automation, industrial electrical maintenance and design, and human-machine interfaces, and industrial communications networks under the direction of senior corporate engineers and integrators. Must have experience with Ignition. Experience with some of the following is strongly desired: Rockwell RSLogix 5, 500, 5000, Studio Rockwell RS View, Factory Talk Studio Inductive Automation Ignition. Must have experience with Ignition. Rockwell PowerFlex Variable Frequency Drives Rockwell Point IO and Flex IO systems Industrial electrical panels and wiring Exposure and understanding of the following are beneficial: Industrial flow meters, temperature probes, level sensors, photoeyes, and solenoid valves Wonderware InTouch, InBatch Microsoft SQL AutoCAD VMWare Workstation Player and vSphere Programming (C++, Visual Basic, Java, Python, etc.) Cisco networking hardware Fanuc Robotic Application Must be available to travel to all Facilities to assist with project work and start-ups. Work with site Control Technicians for troubleshooting, training, and start-ups. Develop and foster strong relationships with Plant Operation team to evolve current systems architecture and maximize manufacturing efficiencies and output. Job requires interaction with plant personnel both hourly and salary. Good people management skills, Customer focused personality and approach are a must. Support local Operations needs for electrical and automation system support. Create written instructions for local Maintenance department for automation systems Commitment to safety begins with management. Managers and frontline supervisors are accountable for creating and maintaining a culture of Safety and assuring a safe work environment. Education and/or Experience Bachelor's degree (B. S.) from four-year College or university in software engineering, electrical engineering, or related discipline. 4+ years' experience with industrial control systems. SKILLS AND ABILITIES Good understanding of industrial automation programming concepts Strong understanding of electrical concepts and theories Understanding of computer WAN and LAN networks Ability to work and manage time independently Ability to quickly learn about new software, hardware, and automation equipment and effectively implement it The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $90k-110K annually. At this time, we are not able to consider candidates who require, or may require, current or future visa sponsorship. This may include, but is not limited to, candidates in F-1/OPT, CPT, H-1B, TN, E-3, H-4 EAD, or similar temporary work-authorized visa statuses. Employment with Ken's Foods is contingent upon successful completion of a drug test, background screening, and pre-employment assessment.
Stefanini Group is looking for Deskside Technician II for a globally recognized company! For interested applicants, click the apply button or you may reach out to Alfher Hidalgo at / for faster processing. Thank you! Duties and Responsibilities: Troubleshooting and repairing hardware issues; Urgent break/fix replacements (e.g., hardware failure troubleshooting and replacement) in accordance with Knowledge Base Articles and work instructions; Preventative maintenance (e.g., lifecycle); Troubleshooting HW issues on end user devices; Proper utilization of ServiceNow; ServiceNow queue management and Ticket follow-up; Escalating Tickets that cannot be resolved to the appropriate desktop support or 3rd party; Critical project support that involves hardware and/or high-touch user experience; Perform comprehensive site hardware asset inventory; Maintain consumable device inventory count; Conduct spare part and loaner pool management; Support IMACR/D requests; Engage OEM for warranty repairs and follow up on status; Escort OEM technicians onsite when needed. Assist client with physical support for incidents related to network, datacenter, and other activities as requested. Work on child ticket as assigned by Level 2/3 client-provided technical staff. What you need to succeed: Knowledge of multiple manufacturers and operating systems. Excellent troubleshooting capability. Ability to work in a team environment as well as independently. Ability to communicate technical information -technical audiences. Excellent verbal and written communication skills. Ability to complete assignments with no supervision. Ability to search internally/externally for support information. Customer-oriented attitude. Ability to travel locally and in-state to support other sites, if applicable. Valid driver's license and proof of auto insurance, if travel is required. Attendance and schedule adherence are requirements of this position. This position includes continuous walking, bending and lifting equipment sometimes up to 50 pounds and engaging in labor related duties of connecting computer equipment. Knows and applies fundamental concepts, practices and procedures of particular field of specialization. Required Skills: 3 years of min. experience as Desktop Support Specialist. Corporate desk side support with strong emphasis supporting Windows and MacOS and corresponding applications; Troubleshooting and replacing hardware on PCs and Mac laptops and desktops; Active Directory Deploying IT equipment (Windows, Mac); Imaging and staging PCs; Managing the equipment inventory and lifecycle; Migrating End User data; Moving in scope IT equipment; Collecting and coordinating disposal of in scope IT equipment; Facilitating third-party vendor on-site presence for Onsite Lifecycle Management
11/14/2026
Full time
Stefanini Group is looking for Deskside Technician II for a globally recognized company! For interested applicants, click the apply button or you may reach out to Alfher Hidalgo at / for faster processing. Thank you! Duties and Responsibilities: Troubleshooting and repairing hardware issues; Urgent break/fix replacements (e.g., hardware failure troubleshooting and replacement) in accordance with Knowledge Base Articles and work instructions; Preventative maintenance (e.g., lifecycle); Troubleshooting HW issues on end user devices; Proper utilization of ServiceNow; ServiceNow queue management and Ticket follow-up; Escalating Tickets that cannot be resolved to the appropriate desktop support or 3rd party; Critical project support that involves hardware and/or high-touch user experience; Perform comprehensive site hardware asset inventory; Maintain consumable device inventory count; Conduct spare part and loaner pool management; Support IMACR/D requests; Engage OEM for warranty repairs and follow up on status; Escort OEM technicians onsite when needed. Assist client with physical support for incidents related to network, datacenter, and other activities as requested. Work on child ticket as assigned by Level 2/3 client-provided technical staff. What you need to succeed: Knowledge of multiple manufacturers and operating systems. Excellent troubleshooting capability. Ability to work in a team environment as well as independently. Ability to communicate technical information -technical audiences. Excellent verbal and written communication skills. Ability to complete assignments with no supervision. Ability to search internally/externally for support information. Customer-oriented attitude. Ability to travel locally and in-state to support other sites, if applicable. Valid driver's license and proof of auto insurance, if travel is required. Attendance and schedule adherence are requirements of this position. This position includes continuous walking, bending and lifting equipment sometimes up to 50 pounds and engaging in labor related duties of connecting computer equipment. Knows and applies fundamental concepts, practices and procedures of particular field of specialization. Required Skills: 3 years of min. experience as Desktop Support Specialist. Corporate desk side support with strong emphasis supporting Windows and MacOS and corresponding applications; Troubleshooting and replacing hardware on PCs and Mac laptops and desktops; Active Directory Deploying IT equipment (Windows, Mac); Imaging and staging PCs; Managing the equipment inventory and lifecycle; Migrating End User data; Moving in scope IT equipment; Collecting and coordinating disposal of in scope IT equipment; Facilitating third-party vendor on-site presence for Onsite Lifecycle Management
Pay Range: $18.00hr - $23.00hr Job Overview: The successful candidate will demonstrate proficiency in Data Analysis & Reporting using MS Office and ITSM tools. The role involves coordinating desktop changes, preparing rollout requests, creating implementation plans, and handling incidents related to desktop environment updates. Responsibilities: Good in Data Analysis & Reporting using MS Office and ITSM tools. Coordinate desktop changes to avoid deployment collisions. Prepare requests for rollout and prioritize change requests. Create rollout plans for change requests. Coordinate the implementation process, keep track of requests, and make sure they are implemented as planned. Participate in incident handling concerning desktop changes. Participate in projects concerning bigger desktop changes, for example rollout of new antivirus. Maintain Microsoft environment knowledge (desktop & server) with a good technical understanding of the products building up a desktop service. Apply experience from the desktop environment and understanding of the change management process. Technical Requirements: Phone support experience necessary. Technical Service desk or technical call center experience is necessary. Disciplined, systematic problem-solving skills required. Experience with Windows Operating systems for Clients (Windows XP, Windows 10) and Servers (Windows 2008/2012/2016). Knowledge of Active Directory. Experience with ITSM ticketing tools such as ServiceNow, Remedy, HP Service Center, and Peregrine Service Center. Proficiency with remote desktop connectivity applications like TeamViewer, SMS, Bomgar, WebEx, Live Meeting, and Windows Native tools. Proficiency with MS Office Suite including MS Word, MS Excel, MS PowerPoint, MS Outlook, MS Project, and MS Visio. Support for Internet browsers (e.g. Explorer, Chrome, Firefox), VPN, and remote dial-in users. Support for laptops, desktops, and printers of all models. PDA and BlackBerry support. Experience with Adobe Acrobat and other common desktop applications like WinZip. Must Have Skills: AMT Asset Management Software. Desk Side Services. Mac Hardware Management. Hardware Asset Management. Hardware Management - Printers. Windows PC. Certifications: MCP/MSCE/MSCA/A+ or HDI CSS or Cisco certification. ITIL knowledge of V2 or V3, especially on Service Desk, Incident, Problem, and Change Management, is preferred. Soft Skills: Excellent communication and conversation skills (verbal and written). Good documentation skills and good working knowledge of MS Office (including MS Project and Visio). Great customer handling skills with the ability to handle unforeseen situations. High level of acceptance. Ability to drive organizational values and methodology. Other Skills / Experience: Ability to successfully provide hardware/software/network problem analysis and resolution support over the phone. Personal dedication to providing high quality, superior service at all times, with an ability to finish tasks. Ability to integrate as a cross-functional team player in a fast-paced environment where information is shared. Ability to learn new information quickly. Ability to work flexible hours from time to time to cover for other Service desk staff and to be on call via pager during the week. Strong focus on Customer Focus, Teamwork, Technical Expertise, Interpersonal Effectiveness, and Concern for Order and Quality. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $18.00hr - $23.00hr Job Overview: The successful candidate will demonstrate proficiency in Data Analysis & Reporting using MS Office and ITSM tools. The role involves coordinating desktop changes, preparing rollout requests, creating implementation plans, and handling incidents related to desktop environment updates. Responsibilities: Good in Data Analysis & Reporting using MS Office and ITSM tools. Coordinate desktop changes to avoid deployment collisions. Prepare requests for rollout and prioritize change requests. Create rollout plans for change requests. Coordinate the implementation process, keep track of requests, and make sure they are implemented as planned. Participate in incident handling concerning desktop changes. Participate in projects concerning bigger desktop changes, for example rollout of new antivirus. Maintain Microsoft environment knowledge (desktop & server) with a good technical understanding of the products building up a desktop service. Apply experience from the desktop environment and understanding of the change management process. Technical Requirements: Phone support experience necessary. Technical Service desk or technical call center experience is necessary. Disciplined, systematic problem-solving skills required. Experience with Windows Operating systems for Clients (Windows XP, Windows 10) and Servers (Windows 2008/2012/2016). Knowledge of Active Directory. Experience with ITSM ticketing tools such as ServiceNow, Remedy, HP Service Center, and Peregrine Service Center. Proficiency with remote desktop connectivity applications like TeamViewer, SMS, Bomgar, WebEx, Live Meeting, and Windows Native tools. Proficiency with MS Office Suite including MS Word, MS Excel, MS PowerPoint, MS Outlook, MS Project, and MS Visio. Support for Internet browsers (e.g. Explorer, Chrome, Firefox), VPN, and remote dial-in users. Support for laptops, desktops, and printers of all models. PDA and BlackBerry support. Experience with Adobe Acrobat and other common desktop applications like WinZip. Must Have Skills: AMT Asset Management Software. Desk Side Services. Mac Hardware Management. Hardware Asset Management. Hardware Management - Printers. Windows PC. Certifications: MCP/MSCE/MSCA/A+ or HDI CSS or Cisco certification. ITIL knowledge of V2 or V3, especially on Service Desk, Incident, Problem, and Change Management, is preferred. Soft Skills: Excellent communication and conversation skills (verbal and written). Good documentation skills and good working knowledge of MS Office (including MS Project and Visio). Great customer handling skills with the ability to handle unforeseen situations. High level of acceptance. Ability to drive organizational values and methodology. Other Skills / Experience: Ability to successfully provide hardware/software/network problem analysis and resolution support over the phone. Personal dedication to providing high quality, superior service at all times, with an ability to finish tasks. Ability to integrate as a cross-functional team player in a fast-paced environment where information is shared. Ability to learn new information quickly. Ability to work flexible hours from time to time to cover for other Service desk staff and to be on call via pager during the week. Strong focus on Customer Focus, Teamwork, Technical Expertise, Interpersonal Effectiveness, and Concern for Order and Quality. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Job Description About the Role Pinnacle Partners is recruiting for an Applications Engineer in Indianapolis, IN. This position focuses on CNC programming, machining applications, customer demonstrations, and developing turnkey manufacturing solutions. The ideal candidate will have strong CAM and CNC programming experience, with the ability to take a customer part from an engineering print or 3D model through programming, tooling selection, machining, and final demonstration. This role combines hands-on machining expertise, technical problem-solving, and customer interaction, with travel generally capped at 25%. Key Responsibilities: Develop accurate machining and cycle-time estimates using customer prints, engineering drawings, and 3D solid models. Program CNC machines to manufacture customer parts using appropriate speeds, feeds, tooling, and toolpaths. Develop and execute cutting demonstrations showcasing 3-axis and 5-axis milling machines and multi-axis lathes. Determine appropriate tooling, workholding, fixturing, and machining processes for customer applications. Evaluate customer parts and manufacturing requirements to determine the best machine, tooling, and processes to produce the finished product. Run customer parts on CNC machines to validate programming, machining processes, and production capabilities. Conduct time studies to evaluate machining cycle times, efficiency, and overall machine performance. Travel to customer facilities to perform machine runoffs and demonstrate the equipment's ability to manufacture customer parts. Conduct CNC milling and lathe programming and operator training classes. Provide technical support to customers, including troubleshooting machining applications, programming challenges, and operational issues. Collaborate with Sales, Marketing, and Service teams to provide technical expertise and application solutions. Assist customers with optimizing machining processes, improving efficiency, and maximizing machine performance. Utilize advanced knowledge of CNC machine functionality, performance, programming, and operating systems to support customer applications. Manage multiple customer projects simultaneously, coordinating programming, machining demonstrations, and project timelines. Support turnkey projects by developing complete manufacturing solutions, from initial part review and machine selection through programming and final implementation. Provide technical expertise throughout the pre-sales process to demonstrate how CNC equipment can meet customer manufacturing requirements. Requirements: Two- or four-year degree in a STEM-related field, preferably related to machining, manufacturing, or engineering, or equivalent relevant experience. Strong CNC programming experience, including the ability to take an engineering print or 3D model and program a machine to manufacture the part. Extensive CAM experience with the ability to independently develop programs and toolpaths. Understanding of machining speeds, feeds, tooling selection, workholding, and fixturing requirements. Experience with 3D modeling or 2D/3D CAM programming. Proven CNC machine tool applications experience involving 3-axis and 5-axis mills and multi-axis lathes. Ability to perform machining time studies and evaluate cycle times. Strong mechanical aptitude and technical problem-solving skills. Ability to evaluate customer manufacturing requirements and develop practical machining solutions. Strong communication and customer service skills, with the ability to explain technical processes and demonstrate equipment capabilities. Ability to manage multiple projects and competing priorities. Willingness and ability to travel up to 25%, including occasional overnight stays. Ability to work independently at customer facilities and conduct machine demonstrations and runoffs. Preferred: Experience developing turnkey manufacturing solutions, from initial part review and machine selection through programming and final production. Previous experience selecting tooling, workholding, and fixturing for complex machining applications. Background as a CNC Operator, CNC Setup Technician, CNC Programmer, or Applications Engineer. Experience providing technical support directly to end-user customers. Familiarity with multiple CAM software platforms. Experience with 3D printing, additive manufacturing, or other engineering-related hobbies and projects. Strong interest in machining, manufacturing technology, and hands-on technical problem-solving. Bilingual in Spanish. Experience supporting customer applications involving complex parts and machining requirements. Benefits Overview: Annual base salary ranging from approximately $60,000-$90,000. Annual bonus potential. Comprehensive benefits package. Additional week of time off typically built into the holiday schedule due to the Christmas/New Year's shutdown. Limited travel, generally capped at 25%, with efforts to keep employees home on weekends. Shared company vehicle, company credit card, and travel expense reimbursement through Concur for applicable travel. Travel time is paid. Standard first-shift schedule, generally 7:00 AM-4:00 PM or 8:00 AM-5:00 PM. On-the-job training and development alongside an experienced applications engineering team. Collaborative corporate office environment featuring an onsite gym and open-concept workspace. Opportunity to work with advanced CNC machine tools and a variety of complex customer machining applications. Opportunity to develop complete manufacturing solutions and directly influence customer productivity and manufacturing capabilities. Explore More Engineering Opportunities This role falls within our Engineering/Manufacturing division , where we specialize in placing professionals in areas such as: Quality Engineering and Quality Assurance Mechanical/Electrical Engineering Manufacturing/Process Engineering CNC Machining and Programming Field Service Engineering Technical Support and Parts Management Controls and Automation Engineering Project Engineering Operations / Plant Engineering Explore additional Engineering roles and learn more about how we support Engineering professionals: Find Jobs or Manufacturing & Engineering Opportunities Not the right fit? We're hiring across multiple divisions, including: Human Resources Administrative & Customer Service Information Technology Accounting & Finance
11/14/2026
Full time
Job Description About the Role Pinnacle Partners is recruiting for an Applications Engineer in Indianapolis, IN. This position focuses on CNC programming, machining applications, customer demonstrations, and developing turnkey manufacturing solutions. The ideal candidate will have strong CAM and CNC programming experience, with the ability to take a customer part from an engineering print or 3D model through programming, tooling selection, machining, and final demonstration. This role combines hands-on machining expertise, technical problem-solving, and customer interaction, with travel generally capped at 25%. Key Responsibilities: Develop accurate machining and cycle-time estimates using customer prints, engineering drawings, and 3D solid models. Program CNC machines to manufacture customer parts using appropriate speeds, feeds, tooling, and toolpaths. Develop and execute cutting demonstrations showcasing 3-axis and 5-axis milling machines and multi-axis lathes. Determine appropriate tooling, workholding, fixturing, and machining processes for customer applications. Evaluate customer parts and manufacturing requirements to determine the best machine, tooling, and processes to produce the finished product. Run customer parts on CNC machines to validate programming, machining processes, and production capabilities. Conduct time studies to evaluate machining cycle times, efficiency, and overall machine performance. Travel to customer facilities to perform machine runoffs and demonstrate the equipment's ability to manufacture customer parts. Conduct CNC milling and lathe programming and operator training classes. Provide technical support to customers, including troubleshooting machining applications, programming challenges, and operational issues. Collaborate with Sales, Marketing, and Service teams to provide technical expertise and application solutions. Assist customers with optimizing machining processes, improving efficiency, and maximizing machine performance. Utilize advanced knowledge of CNC machine functionality, performance, programming, and operating systems to support customer applications. Manage multiple customer projects simultaneously, coordinating programming, machining demonstrations, and project timelines. Support turnkey projects by developing complete manufacturing solutions, from initial part review and machine selection through programming and final implementation. Provide technical expertise throughout the pre-sales process to demonstrate how CNC equipment can meet customer manufacturing requirements. Requirements: Two- or four-year degree in a STEM-related field, preferably related to machining, manufacturing, or engineering, or equivalent relevant experience. Strong CNC programming experience, including the ability to take an engineering print or 3D model and program a machine to manufacture the part. Extensive CAM experience with the ability to independently develop programs and toolpaths. Understanding of machining speeds, feeds, tooling selection, workholding, and fixturing requirements. Experience with 3D modeling or 2D/3D CAM programming. Proven CNC machine tool applications experience involving 3-axis and 5-axis mills and multi-axis lathes. Ability to perform machining time studies and evaluate cycle times. Strong mechanical aptitude and technical problem-solving skills. Ability to evaluate customer manufacturing requirements and develop practical machining solutions. Strong communication and customer service skills, with the ability to explain technical processes and demonstrate equipment capabilities. Ability to manage multiple projects and competing priorities. Willingness and ability to travel up to 25%, including occasional overnight stays. Ability to work independently at customer facilities and conduct machine demonstrations and runoffs. Preferred: Experience developing turnkey manufacturing solutions, from initial part review and machine selection through programming and final production. Previous experience selecting tooling, workholding, and fixturing for complex machining applications. Background as a CNC Operator, CNC Setup Technician, CNC Programmer, or Applications Engineer. Experience providing technical support directly to end-user customers. Familiarity with multiple CAM software platforms. Experience with 3D printing, additive manufacturing, or other engineering-related hobbies and projects. Strong interest in machining, manufacturing technology, and hands-on technical problem-solving. Bilingual in Spanish. Experience supporting customer applications involving complex parts and machining requirements. Benefits Overview: Annual base salary ranging from approximately $60,000-$90,000. Annual bonus potential. Comprehensive benefits package. Additional week of time off typically built into the holiday schedule due to the Christmas/New Year's shutdown. Limited travel, generally capped at 25%, with efforts to keep employees home on weekends. Shared company vehicle, company credit card, and travel expense reimbursement through Concur for applicable travel. Travel time is paid. Standard first-shift schedule, generally 7:00 AM-4:00 PM or 8:00 AM-5:00 PM. On-the-job training and development alongside an experienced applications engineering team. Collaborative corporate office environment featuring an onsite gym and open-concept workspace. Opportunity to work with advanced CNC machine tools and a variety of complex customer machining applications. Opportunity to develop complete manufacturing solutions and directly influence customer productivity and manufacturing capabilities. Explore More Engineering Opportunities This role falls within our Engineering/Manufacturing division , where we specialize in placing professionals in areas such as: Quality Engineering and Quality Assurance Mechanical/Electrical Engineering Manufacturing/Process Engineering CNC Machining and Programming Field Service Engineering Technical Support and Parts Management Controls and Automation Engineering Project Engineering Operations / Plant Engineering Explore additional Engineering roles and learn more about how we support Engineering professionals: Find Jobs or Manufacturing & Engineering Opportunities Not the right fit? We're hiring across multiple divisions, including: Human Resources Administrative & Customer Service Information Technology Accounting & Finance
Job Description SHINING 3D DENTAL: Shining 3D is a global leader in 3D scanning, additive manufacturing, and digital dental solutions. Our mission is to make high-quality digital dentistry accessible, reliable, and efficient for dental practices and labs around the world. With a rapidly expanding product ecosystem-including intraoral scanners, 3D printers, dental design software, and integrated cloud tools-we empower clinicians and technicians to deliver precise, streamlined patient care. Shining 3D is seeking a skilled and motivated Dental Application Engineer (AE) to support our digital dentistry customers across Post-Sales functions. This role plays a critical part in helping practices and labs adopt and succeed with our scanning, printing, and CAD/CAM workflows. You will work closely with Sales, Product, Engineering, and Training teams to deliver exceptional customer experiences, provide technical expertise, and ensure smooth implementation and long-term success with Shining 3D solutions. The ideal candidate combines strong technical skills with customer empathy, clear communication, and a passion for digital dentistry. This role is fast-paced, highly collaborative, and well-suited for someone who enjoys problem-solving, teaching, and supporting customers across a wide range of technical touchpoints. ESSENTIAL FUNCTIONS: Provide customer-facing sales support to resellers and end users. Create internal and external technical user guides. Provide technical training to resellers and end users. Repair scanners and printers as needed. Show empathy towards customer complaints and sensitive situations. Communicate customer/reseller requests and complaints to R&D. Evaluate new products and test new software/features. Ability to travel up to 30% of the time to assist customers/resellers on-site and attend exhibitions. REQUIREMENTS: Bachelor's degree in science, engineering, mathematics, or a dental-related field is highly preferred. Experience as a dental lab technician, dental assistant, or dental hygienist. Strong troubleshooting, problem-solving, and customer service skills. CAD/CAM experience. Bilingual proficiency in Spanish and English is highly desired. Ability to collaborate across technical and non-technical teams. Basic IT skills, including file systems and software navigation. Ability to lift 50 lbs, use a computer with a mouse and keyboard, and sit or stand for extended periods. Bilingual proficiency in English and French is required, with strong verbal and written communication skills in both languages. Benifits: Health/Dental/Vision insurance 100% covered by company; 401(k) matched; Transportation allowance if work in office; Food, snack, coffee supply; Birthday welfare; Festival welfare; Team-building activities.
11/14/2026
Full time
Job Description SHINING 3D DENTAL: Shining 3D is a global leader in 3D scanning, additive manufacturing, and digital dental solutions. Our mission is to make high-quality digital dentistry accessible, reliable, and efficient for dental practices and labs around the world. With a rapidly expanding product ecosystem-including intraoral scanners, 3D printers, dental design software, and integrated cloud tools-we empower clinicians and technicians to deliver precise, streamlined patient care. Shining 3D is seeking a skilled and motivated Dental Application Engineer (AE) to support our digital dentistry customers across Post-Sales functions. This role plays a critical part in helping practices and labs adopt and succeed with our scanning, printing, and CAD/CAM workflows. You will work closely with Sales, Product, Engineering, and Training teams to deliver exceptional customer experiences, provide technical expertise, and ensure smooth implementation and long-term success with Shining 3D solutions. The ideal candidate combines strong technical skills with customer empathy, clear communication, and a passion for digital dentistry. This role is fast-paced, highly collaborative, and well-suited for someone who enjoys problem-solving, teaching, and supporting customers across a wide range of technical touchpoints. ESSENTIAL FUNCTIONS: Provide customer-facing sales support to resellers and end users. Create internal and external technical user guides. Provide technical training to resellers and end users. Repair scanners and printers as needed. Show empathy towards customer complaints and sensitive situations. Communicate customer/reseller requests and complaints to R&D. Evaluate new products and test new software/features. Ability to travel up to 30% of the time to assist customers/resellers on-site and attend exhibitions. REQUIREMENTS: Bachelor's degree in science, engineering, mathematics, or a dental-related field is highly preferred. Experience as a dental lab technician, dental assistant, or dental hygienist. Strong troubleshooting, problem-solving, and customer service skills. CAD/CAM experience. Bilingual proficiency in Spanish and English is highly desired. Ability to collaborate across technical and non-technical teams. Basic IT skills, including file systems and software navigation. Ability to lift 50 lbs, use a computer with a mouse and keyboard, and sit or stand for extended periods. Bilingual proficiency in English and French is required, with strong verbal and written communication skills in both languages. Benifits: Health/Dental/Vision insurance 100% covered by company; 401(k) matched; Transportation allowance if work in office; Food, snack, coffee supply; Birthday welfare; Festival welfare; Team-building activities.
Job Description Test Engineer - Electromechanical Systems & Prototype Testing Location: Fredericksburg, VA Employment Type: Direct Hire Work Arrangement: Onsite 1st Shift, Monday-Friday Compensation: $90,000-$115,000 annually + Competitive Benefits Position Overview We are seeking a hands-on Test Engineer to support the assembly, testing, troubleshooting, and validation of complex electromechanical systems, including robotic arms, unmanned ground vehicles (UGVs), and prototype equipment. This role focuses on building, disassembling, modifying, and testing electrical and mechanical devices to support engineering design decisions, validate new products and materials, and ensure prototype systems meet functional and performance requirements. The ideal candidate will have practical experience working with electromechanical assemblies, electrical test instrumentation, mechanical measurement tools, and shop equipment. They should be comfortable performing hands-on troubleshooting, collecting and analyzing test data, and communicating findings to engineering teams. Success in this position requires a combination of mechanical aptitude, electrical troubleshooting skills, attention to detail, and strong Microsoft Excel proficiency. Key Responsibilities 1. Electromechanical Assembly & Troubleshooting Build, disassemble, rebuild, modify, and troubleshoot electrical and mechanical devices, assemblies, and prototype systems. Perform hands-on assembly, debugging, and testing of complex electromechanical equipment. Identify and resolve mechanical, electrical, and control system issues during prototype development and validation. Collaborate with engineers to investigate design issues, troubleshoot failures, and implement improvements. Support fabrication, assembly, and modification of prototype equipment and test fixtures. Read and interpret electrical schematics, mechanical drawings, and engineering documentation. 2. Prototype Testing & Validation Develop and execute test plans, procedures, and protocols for electromechanical systems and prototype equipment. Perform functional and performance testing to support engineering design decisions and product development. Conduct testing to validate new designs, components, and materials. Verify subsystem and complete system functionality during prototype builds. Validate prototype performance against customer requirements and engineering specifications. Support testing of robotic systems and embedded control software. Identify, document, and communicate test failures, performance issues, and potential design improvements. Assist with production verification, integration testing, and troubleshooting activities. 3. Test Equipment & Measurement Operate electrical test equipment, including multimeters, oscilloscopes, and other diagnostic instrumentation. Use mechanical measurement tools, including calipers and micrometers, to verify component dimensions and tolerances. Utilize force, torque, position, temperature, and other sensors to collect test measurements. Set up, operate, and troubleshoot test equipment and instrumentation. Use common shop tools, including wrenches, screwdrivers, saws, drill presses, bench grinders, and other mechanical assembly equipment. Ensure proper use, handling, and maintenance of test equipment and tools. 4. Data Collection, Analysis & Reporting Collect, organize, analyze, and report test data using Microsoft Excel. Develop and maintain accurate test records, technical documentation, and engineering reports. Evaluate test results to identify trends, performance concerns, and potential design issues. Communicate testing results and recommendations to engineering and project teams. Upload software, collect system test data, and follow equipment-specific testing procedures. Learn and utilize new software tools and test applications as required. Maintain accurate documentation of troubleshooting activities, test procedures, and validation results. 5. Engineering Collaboration & Project Support Work closely with mechanical, electrical, software, manufacturing, quality, and systems engineering teams. Provide feedback to engineering teams to support design improvements and prototype development. Communicate effectively with technicians, engineers, vendors, customers, and other stakeholders. Manage assigned testing activities and projects to meet established schedules and technical requirements. Support manufacturing, service, and warranty-related troubleshooting activities as needed. Assist with additional engineering and testing responsibilities as assigned. Required Qualifications Education & Experience Bachelor's degree in Mechanical Engineering, Robotics Engineering, or a related engineering discipline. Approximately 5 years of relevant experience in electromechanical testing, prototype development, product validation, or related engineering activities. Demonstrated hands-on experience building, disassembling, rebuilding, and troubleshooting electrical and mechanical devices. Experience testing and evaluating prototype electromechanical systems. Experience performing functional testing, performance validation, and troubleshooting of mechanical and electrical assemblies. Experience collecting, analyzing, and reporting test data. Technical Skills Strong understanding of electromechanical systems and their mechanical, electrical, and control system interfaces. Hands-on experience using electrical measurement equipment, including multimeters and oscilloscopes. Experience using mechanical measurement tools such as calipers and micrometers. Familiarity with force, torque, position, and temperature sensors. Ability to safely operate common shop tools, including wrenches, fastener drivers, saws, drill presses, and bench grinders. Ability to read and interpret electrical schematics and mechanical engineering drawings. Strong proficiency with Microsoft Excel for data collection, organization, evaluation, and reporting. Ability to learn and use new software tools with guidance from software engineers or technical personnel. Ability to upload software and collect test data using system-specific procedures. Strong troubleshooting, analytical, and practical problem-solving skills. Ability to accurately document testing activities, findings, and technical results. Professional Skills Strong written and verbal communication skills. Ability to collaborate effectively with multidisciplinary engineering and technical teams. Strong attention to detail and commitment to accurate test results. Ability to work independently while following established testing procedures and project requirements. Strong organizational and time management skills. Willingness to perform hands-on assembly, troubleshooting, and testing activities. Preferred Qualifications Experience testing robotic systems, unmanned ground vehicles, robotic arms, or other complex electromechanical equipment. Experience with prototype development, engineering validation, or research and development testing. Familiarity with CAD software, particularly SolidWorks, for reviewing and referencing mechanical models. Experience using logic analyzers, data acquisition systems, or specialized test instrumentation. Experience with embedded control systems and software-based test procedures. Familiarity with environmental and electromagnetic compatibility testing standards, including MIL-STD-810 and MIL-STD-461. Experience supporting manufacturing, product development, or production validation activities. Experience developing test procedures, technical reports, and engineering documentation. Work Environment & Physical Requirements Work is performed in engineering, laboratory, office, manufacturing, and prototype testing environments. May involve exposure to manufacturing noise, dust, fumes, oils, and temperature variations. Requires the ability to alternate between sitting, standing, and walking for extended periods. Must be able to lift and carry parts or equipment weighing up to 45 pounds. Must follow established safety procedures, workmanship standards, and housekeeping requirements. Must wear appropriate personal protective equipment (PPE) when required. Training will be provided on applicable safety procedures and specialized tools or software. May provide technical oversight or direction to other designers or technicians as assigned. Priority Qualifications - Candidate Evaluation The following capabilities are the highest priorities when evaluating candidates: Hands-On Electromechanical Experience: Experience building, disassembling, rebuilding, and troubleshooting electrical and mechanical devices. Prototype Testing & Validation: Experience testing prototype equipment, validating system functionality, and identifying mechanical or electrical performance issues. Test & Measurement Equipment: Practical experience using multimeters, oscilloscopes, calipers, micrometers, and applicable measurement sensors. . click apply for full job details
11/14/2026
Full time
Job Description Test Engineer - Electromechanical Systems & Prototype Testing Location: Fredericksburg, VA Employment Type: Direct Hire Work Arrangement: Onsite 1st Shift, Monday-Friday Compensation: $90,000-$115,000 annually + Competitive Benefits Position Overview We are seeking a hands-on Test Engineer to support the assembly, testing, troubleshooting, and validation of complex electromechanical systems, including robotic arms, unmanned ground vehicles (UGVs), and prototype equipment. This role focuses on building, disassembling, modifying, and testing electrical and mechanical devices to support engineering design decisions, validate new products and materials, and ensure prototype systems meet functional and performance requirements. The ideal candidate will have practical experience working with electromechanical assemblies, electrical test instrumentation, mechanical measurement tools, and shop equipment. They should be comfortable performing hands-on troubleshooting, collecting and analyzing test data, and communicating findings to engineering teams. Success in this position requires a combination of mechanical aptitude, electrical troubleshooting skills, attention to detail, and strong Microsoft Excel proficiency. Key Responsibilities 1. Electromechanical Assembly & Troubleshooting Build, disassemble, rebuild, modify, and troubleshoot electrical and mechanical devices, assemblies, and prototype systems. Perform hands-on assembly, debugging, and testing of complex electromechanical equipment. Identify and resolve mechanical, electrical, and control system issues during prototype development and validation. Collaborate with engineers to investigate design issues, troubleshoot failures, and implement improvements. Support fabrication, assembly, and modification of prototype equipment and test fixtures. Read and interpret electrical schematics, mechanical drawings, and engineering documentation. 2. Prototype Testing & Validation Develop and execute test plans, procedures, and protocols for electromechanical systems and prototype equipment. Perform functional and performance testing to support engineering design decisions and product development. Conduct testing to validate new designs, components, and materials. Verify subsystem and complete system functionality during prototype builds. Validate prototype performance against customer requirements and engineering specifications. Support testing of robotic systems and embedded control software. Identify, document, and communicate test failures, performance issues, and potential design improvements. Assist with production verification, integration testing, and troubleshooting activities. 3. Test Equipment & Measurement Operate electrical test equipment, including multimeters, oscilloscopes, and other diagnostic instrumentation. Use mechanical measurement tools, including calipers and micrometers, to verify component dimensions and tolerances. Utilize force, torque, position, temperature, and other sensors to collect test measurements. Set up, operate, and troubleshoot test equipment and instrumentation. Use common shop tools, including wrenches, screwdrivers, saws, drill presses, bench grinders, and other mechanical assembly equipment. Ensure proper use, handling, and maintenance of test equipment and tools. 4. Data Collection, Analysis & Reporting Collect, organize, analyze, and report test data using Microsoft Excel. Develop and maintain accurate test records, technical documentation, and engineering reports. Evaluate test results to identify trends, performance concerns, and potential design issues. Communicate testing results and recommendations to engineering and project teams. Upload software, collect system test data, and follow equipment-specific testing procedures. Learn and utilize new software tools and test applications as required. Maintain accurate documentation of troubleshooting activities, test procedures, and validation results. 5. Engineering Collaboration & Project Support Work closely with mechanical, electrical, software, manufacturing, quality, and systems engineering teams. Provide feedback to engineering teams to support design improvements and prototype development. Communicate effectively with technicians, engineers, vendors, customers, and other stakeholders. Manage assigned testing activities and projects to meet established schedules and technical requirements. Support manufacturing, service, and warranty-related troubleshooting activities as needed. Assist with additional engineering and testing responsibilities as assigned. Required Qualifications Education & Experience Bachelor's degree in Mechanical Engineering, Robotics Engineering, or a related engineering discipline. Approximately 5 years of relevant experience in electromechanical testing, prototype development, product validation, or related engineering activities. Demonstrated hands-on experience building, disassembling, rebuilding, and troubleshooting electrical and mechanical devices. Experience testing and evaluating prototype electromechanical systems. Experience performing functional testing, performance validation, and troubleshooting of mechanical and electrical assemblies. Experience collecting, analyzing, and reporting test data. Technical Skills Strong understanding of electromechanical systems and their mechanical, electrical, and control system interfaces. Hands-on experience using electrical measurement equipment, including multimeters and oscilloscopes. Experience using mechanical measurement tools such as calipers and micrometers. Familiarity with force, torque, position, and temperature sensors. Ability to safely operate common shop tools, including wrenches, fastener drivers, saws, drill presses, and bench grinders. Ability to read and interpret electrical schematics and mechanical engineering drawings. Strong proficiency with Microsoft Excel for data collection, organization, evaluation, and reporting. Ability to learn and use new software tools with guidance from software engineers or technical personnel. Ability to upload software and collect test data using system-specific procedures. Strong troubleshooting, analytical, and practical problem-solving skills. Ability to accurately document testing activities, findings, and technical results. Professional Skills Strong written and verbal communication skills. Ability to collaborate effectively with multidisciplinary engineering and technical teams. Strong attention to detail and commitment to accurate test results. Ability to work independently while following established testing procedures and project requirements. Strong organizational and time management skills. Willingness to perform hands-on assembly, troubleshooting, and testing activities. Preferred Qualifications Experience testing robotic systems, unmanned ground vehicles, robotic arms, or other complex electromechanical equipment. Experience with prototype development, engineering validation, or research and development testing. Familiarity with CAD software, particularly SolidWorks, for reviewing and referencing mechanical models. Experience using logic analyzers, data acquisition systems, or specialized test instrumentation. Experience with embedded control systems and software-based test procedures. Familiarity with environmental and electromagnetic compatibility testing standards, including MIL-STD-810 and MIL-STD-461. Experience supporting manufacturing, product development, or production validation activities. Experience developing test procedures, technical reports, and engineering documentation. Work Environment & Physical Requirements Work is performed in engineering, laboratory, office, manufacturing, and prototype testing environments. May involve exposure to manufacturing noise, dust, fumes, oils, and temperature variations. Requires the ability to alternate between sitting, standing, and walking for extended periods. Must be able to lift and carry parts or equipment weighing up to 45 pounds. Must follow established safety procedures, workmanship standards, and housekeeping requirements. Must wear appropriate personal protective equipment (PPE) when required. Training will be provided on applicable safety procedures and specialized tools or software. May provide technical oversight or direction to other designers or technicians as assigned. Priority Qualifications - Candidate Evaluation The following capabilities are the highest priorities when evaluating candidates: Hands-On Electromechanical Experience: Experience building, disassembling, rebuilding, and troubleshooting electrical and mechanical devices. Prototype Testing & Validation: Experience testing prototype equipment, validating system functionality, and identifying mechanical or electrical performance issues. Test & Measurement Equipment: Practical experience using multimeters, oscilloscopes, calipers, micrometers, and applicable measurement sensors. . click apply for full job details
Job Description Looking for a career where hard work is valued, and your ideas and feedback are part of the way we operate daily? Want to bring your skills to a company that encourages teamwork and champions continued education and process improvement? Atlas Tech, a veteran-owned IT company serving multiple DoD customers in support of America's warfighters, is looking for a Senior Cloud Engineer in North Charleston, SC. This is an onsite position requiring a relocation if you are outside of the Charleston market. The ideal candidate for this position will have proven experience in a technology-driven program or project supporting the US Navy. If you have systems engineering skills, a strong work ethic and commitment to quality, we would like to talk to you about joining our growing team. You Will: Design, deploy, secure, and sustain Microsoft Azure architectures, with preference for Azure Government over commercial cloud and Azure over AWS. Apply experience in DoD Impact Level environments; IL5 experience is strongly desired, and IL6 experience is ideal. Design hybrid-cloud solutions that run complementary services on premises and in Azure, including integration and management through Azure Arc. Engineer external connectivity and direct-connect solutions, including Azure ExpressRoute, VPN Gateway, routing, and connectivity to on-premises networks. Design and manage internal networking, including virtual networks, subnets, network security groups, VLANs, routing, and network segmentation. Implement cloud security using Microsoft Defender, Azure Firewall, VPN Gateway, secure baselines, least-privilege access, and Zero Trust principles. Design and administer Azure identity, role-based access control, privileged access, and service identities, including integration with program-provided NIS tools. Architect and support Azure Virtual Desktop, Windows and Linux virtual machines, and containerized workloads. Evaluate technical, cybersecurity, mission, and cost constraints and develop resilient Azure solution architectures and implementation plans. Develop repeatable infrastructure provisioning and configuration using Azure Automation integrated with Terraform; PowerShell, Bash, Python, and CI/CD experience is valuable. Troubleshoot complex cloud, network, identity, security, compute, and hybrid-integration issues across lab and production environments. Produce architecture diagrams, implementation plans, test artifacts, operating procedures, and RMF/ATO compliance evidence; participate in technical reviews and change management. You Have: US Citizenship Possession of a Department of Defense (DoD) Secret Level Security Clearance with a current SSBI/T5 investigation, TS/SCI desired DoD Certifications to be qualified as an Information Assurance Technician (IAT) Level II (e.g. CompTIA Security+ certification) 10+ years of experience with C4I systems with specific focus on systems engineering and cybersecurity support Bachelor's Degree in Engineering, Computer Science, or related field Operating System Certificate (e.g., Linux+, Windows Server, CCNA, etc) Experience supporting Navy C4I or comparable DoD mission environments. Azure Government and classified-cloud engineering experience at IL6. Advanced Azure architecture experience with Azure Virtual Desktop, Azure Arc, ExpressRoute, Azure Firewall, Microsoft Defender, VPN Gateway, virtual machines, containers, and role-based access control. Hybrid-cloud architecture spanning on-premises infrastructure and Azure services. Terraform integrated with Azure Automation, Git-based version control, and CI/CD pipelines. Experience with Azure Kubernetes Service or other Kubernetes/container platforms. Familiarity with DISA STIGs, ACAS/SCAP remediation, RMF controls, POA&Ms, and continuous monitoring. Strong communication, technical documentation, collaboration, and leadership skills in a multi-disciplinary Agile environment. Want to hear more? Read on to see what our Team Members say about their experience: "To me, the best part about working at Atlas is the level of transparency afforded to everyone in the company. I've had plenty of jobs where I knew what I was doing, but at Atlas there is a concerted effort to make sure we also understand why, and how our role directly impacts the overall mission." - Jess "With LEARNING as a core value, Atlas is constantly promoting ways to increase knowledge and stay at the forefront of the latest technology. Team members are regularly encouraged to continue learning and Atlas provides training resources and skills enhancement opportunities internally as well as education reimbursement if you prefer to obtain skills through outside resources or higher education." - Wendy Atlas Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, genetic information, or protected veteran status. We are committed to fostering an inclusive workplace where diverse perspectives are valued and respected. Accessibility & Accommodations Atlas Tech strives to make our website accessible to all users. If you need assistance completing the application process or require a reasonable accommodation due to a disability, please contact us at . This contact information is designated for accommodation requests only and cannot be used to inquire about the status of an application. Atlas Tech is committed to providing reasonable accommodations in accordance with the Americans with Disabilities Act (ADA). Atlas Tech offers a competitive salary, generous benefits package, and an opportunity to make a positive impact in your own community.
11/14/2026
Full time
Job Description Looking for a career where hard work is valued, and your ideas and feedback are part of the way we operate daily? Want to bring your skills to a company that encourages teamwork and champions continued education and process improvement? Atlas Tech, a veteran-owned IT company serving multiple DoD customers in support of America's warfighters, is looking for a Senior Cloud Engineer in North Charleston, SC. This is an onsite position requiring a relocation if you are outside of the Charleston market. The ideal candidate for this position will have proven experience in a technology-driven program or project supporting the US Navy. If you have systems engineering skills, a strong work ethic and commitment to quality, we would like to talk to you about joining our growing team. You Will: Design, deploy, secure, and sustain Microsoft Azure architectures, with preference for Azure Government over commercial cloud and Azure over AWS. Apply experience in DoD Impact Level environments; IL5 experience is strongly desired, and IL6 experience is ideal. Design hybrid-cloud solutions that run complementary services on premises and in Azure, including integration and management through Azure Arc. Engineer external connectivity and direct-connect solutions, including Azure ExpressRoute, VPN Gateway, routing, and connectivity to on-premises networks. Design and manage internal networking, including virtual networks, subnets, network security groups, VLANs, routing, and network segmentation. Implement cloud security using Microsoft Defender, Azure Firewall, VPN Gateway, secure baselines, least-privilege access, and Zero Trust principles. Design and administer Azure identity, role-based access control, privileged access, and service identities, including integration with program-provided NIS tools. Architect and support Azure Virtual Desktop, Windows and Linux virtual machines, and containerized workloads. Evaluate technical, cybersecurity, mission, and cost constraints and develop resilient Azure solution architectures and implementation plans. Develop repeatable infrastructure provisioning and configuration using Azure Automation integrated with Terraform; PowerShell, Bash, Python, and CI/CD experience is valuable. Troubleshoot complex cloud, network, identity, security, compute, and hybrid-integration issues across lab and production environments. Produce architecture diagrams, implementation plans, test artifacts, operating procedures, and RMF/ATO compliance evidence; participate in technical reviews and change management. You Have: US Citizenship Possession of a Department of Defense (DoD) Secret Level Security Clearance with a current SSBI/T5 investigation, TS/SCI desired DoD Certifications to be qualified as an Information Assurance Technician (IAT) Level II (e.g. CompTIA Security+ certification) 10+ years of experience with C4I systems with specific focus on systems engineering and cybersecurity support Bachelor's Degree in Engineering, Computer Science, or related field Operating System Certificate (e.g., Linux+, Windows Server, CCNA, etc) Experience supporting Navy C4I or comparable DoD mission environments. Azure Government and classified-cloud engineering experience at IL6. Advanced Azure architecture experience with Azure Virtual Desktop, Azure Arc, ExpressRoute, Azure Firewall, Microsoft Defender, VPN Gateway, virtual machines, containers, and role-based access control. Hybrid-cloud architecture spanning on-premises infrastructure and Azure services. Terraform integrated with Azure Automation, Git-based version control, and CI/CD pipelines. Experience with Azure Kubernetes Service or other Kubernetes/container platforms. Familiarity with DISA STIGs, ACAS/SCAP remediation, RMF controls, POA&Ms, and continuous monitoring. Strong communication, technical documentation, collaboration, and leadership skills in a multi-disciplinary Agile environment. Want to hear more? Read on to see what our Team Members say about their experience: "To me, the best part about working at Atlas is the level of transparency afforded to everyone in the company. I've had plenty of jobs where I knew what I was doing, but at Atlas there is a concerted effort to make sure we also understand why, and how our role directly impacts the overall mission." - Jess "With LEARNING as a core value, Atlas is constantly promoting ways to increase knowledge and stay at the forefront of the latest technology. Team members are regularly encouraged to continue learning and Atlas provides training resources and skills enhancement opportunities internally as well as education reimbursement if you prefer to obtain skills through outside resources or higher education." - Wendy Atlas Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, genetic information, or protected veteran status. We are committed to fostering an inclusive workplace where diverse perspectives are valued and respected. Accessibility & Accommodations Atlas Tech strives to make our website accessible to all users. If you need assistance completing the application process or require a reasonable accommodation due to a disability, please contact us at . This contact information is designated for accommodation requests only and cannot be used to inquire about the status of an application. Atlas Tech is committed to providing reasonable accommodations in accordance with the Americans with Disabilities Act (ADA). Atlas Tech offers a competitive salary, generous benefits package, and an opportunity to make a positive impact in your own community.