49 jobs found

Job Description Job Description Job Title: New Technology Installer/Trainer Location: Salt Lake City, UT Job-Type: Contract to Hire Employment Eligibility: Gravity cannot transfer nor sponsor a work visa for this position. Applicants must be eligible to work in the U.S. for any employer directly (we are not open to contract or "corp to corp" agreements). Position Overview: Gravity IT Resources is seeking a Technology Installer/Trainer that can use exceptional troubleshooting, and training skills as well as a keen attention to detail to assist with the installation, support and maintenance of technical applications and equipment in sites across the U.S. and Canada. Duties & Responsibilities: Setting up new technology - any enhancements, new equipment, etc. There are two phases for most new projects: Install and/or upgrade physical equipment Teach/train the employees how to use the new equipment Duties below are common when not involved in an actual new install/upgrade project: Assist in the research, development, implementation and training of new software and hardware technologies in a Unix/Windows environment. Identify, research, and resolve technical problems. Respond to telephone calls, email, web, and personnel requests for technical support. Document, track, and monitor problems to ensure a timely resolution. Provide technical support to end users on a variety of issues. Evaluate and document new or changed computer systems. Perform other duties as assigned by Technology Development Supervisor and Management. Required Experience & Skills: Basic use of hand tools - Equipment Installation - Basic knowledge of common hand tools. The use of common hand tools is required for the installation of Alsco Production Schedule and RFID Scanning equipment. Networking experience/knowledge - Networking - Basic knowledge of routers, switches, other networked devices, and WAN circuits. Ability to configure and troubleshoot LAN, WAN, RAS, and VPN connections; familiar with cabling standards CAT 5, 6, RJ45 and RJ11 termination procedures and punch-down procedures. Networking team will have the network set up (these people will pull cat 5 cable, terminate the ends, troubleshoot any issues on connectivity, etc.) Software - Basic knowledge of configuration settings in Windows 10 and Microsoft Office 2019 & Office 365. Basic knowledge of installation/un-installation procedures of Windows Updates and other PC Software. The ideal candidate will have minimum of 2 years of IT Technical Support or Training Experience and 2 years of systems installation experience preferred. Ability to learn is huge Excellent analytical skills and the ability to research/ troubleshoot a variety of projects.

Job Description Job Description Fiber and Copper I&R Telecommunication Tech Skill Requirements Experience in telephone service Experience in CATV installations. Knowledge of Coax cable sizes and types. Experience with test sets Experience routers and home networking. Technical understanding of loss, attenuation, and tiling. Working within attics and crawl spaces. Computer skills Maintains/repairs and tests copper cable in an underground, aerial, or buried environment. Troubleshoots problems that will require copper repair, copper maintenance, copper slicing, faultfinding, etc. Splice existing facilities in buried, underground, aerial and building work locations. Uses hand tools, power tools, and specialty tools, including specialty meters (e.g., multi-meters, volt-ohm meters, HST-3000, Sidekick), in inside and outside plant facilities. Performs testing and turn-up of subscriber lines. Locates and repairs aerial and underground cable. Locates, joins, repairs and rearranges cable and cable equipment in buildings and aerial or buried plant. Installs, maintains/repairs, and tests residential/small business telecommunication service (POTS, Prism, Fiber and DSL). Connects wires and cables to terminals, frames, and attaches/detaches various kinds of hardware to wires, cables, buildings, and poles. Performs continuity and/or conformance testing. Reads and interprets customer service orders, technical (i.e., mechanical, electrical, digital) drawings, maps, blueprints, diagrams, etc. Receives service orders, worksheets (detailed diagrams describing nature and location of equipment to be installed or repaired) and repair tickets from supervisor or other designated employees and performs specified work. Works with telecom color-coded wires and cables. Interacts with customers professionally and courteously via telephone or on the premises. Works well with others to achieve common goals and to foster a cooperative climate, as well as work independently in the field with little supervision. Summary Responsible for tasks assigned by the Company in connection with service order and repair activity on fiber network facilities between and including the customer-serving terminal and into the customer's premise, as well as installation activity at the fiber hub. These tasks may include, but not be limited to, installation and maintenance of voice, data and video equipment and/or service at the customer premise. In addition to providing revenue enhancing offers to the customer. Performs other duties as required.General DutiesDuties include, but are not limited to, the following: Installs, removes, rearranges, programs, tests, troubleshoots and maintains fiber network services. Installs and configures routers, set top boxes. Interacts with Advanced Technical Services as needed. May install appropriate inside wire/cable (such as Cat 5E, Coaxial cable).C. Installs maintains and repairs outside and inside fiber equipment/facilities including inside wiring and fiber jumpers at the distribution hub. Activates the ONT, STB and router at customer premise. Interfaces with customer to negotiate the placement of equipment. Trains the customer on how to use the new equipment. Ensures the customer is satisfied with the work that has been done. Responds to inquires and provides follow-up. Interprets schematic work order drawings to determine job specifications and installation needs. Orders and/or obtains required equipment. Effects problem solving where appropriate. Utilizes various test equipment to analyze equipment trouble and takes appropriate maintenance action. May be required to perform additional duties and tasks as required by the Company. Basic QualificationsA. Tests - Results obtained in standard tests for this position must meet minimum requirements established by the Company, in accordance with Company policy. Must meet ADEX/Frontier's standards of professionalism in communications and appearance. Must wear ADEX/Frontier branded attire. Wears appropriate safety apparel and is aware of and follows all established safety practices and procedures. Ability to identify and distinguish audible tones/levels and colors. Ability to work in confined areas. Ability to lift and carry tool boxes, drop wire, parts containers and installation loads, test equipment, etc. Ability to work aloft. In some areas, pole climbing may not be a requirement; for locations where pole climbing is required, a candidate must meet the course qualification standard. Ability to lift, carry, set-up, climb and take down ladders. Ability to communicate naturally and pleasantly over the telephone. Ability to professionally communicate extensively in person during in-home installation. Requires alertness and attention to detail. Ability to work under stress. A valid driver's license. Able to read and interpret architectural, electrical wiring diagrams. Able to operate applicable test equipment.P. Must be available to workas scheduled including weekends and holidays and for callouts and/or overtime as required. One year of experience in one or a combination of: Cable Splicer, Customer Engineer-Data Application, Customer Equipment Technician, Customer Zone Technician II, Customer Zone Technician I, Equipment Installer, Fiber Customer Support Analyst, Fiber Network Technician. EducationDegree in electronics technology from an accredited or recognized educational institution or equivalent experience

Job Description Job Description We are seeking a skilled Distributed Antenna System (DAS) Technician to join our team and contribute to the successful implementation and maintenance of DAS solutions for our clients. The ideal candidate will have a strong technical background, excellent problem-solving skills, and a passion for delivering exceptional service. Responsibilities: Installation & Configuration Install, test, and commission DAS and BDA systems for cellular and public safety communications according to project specifications and industry standards. Ensure system alignment with carrier and regulatory standards, and compliance with local building codes. System Design & Optimization Collaborate on design interpretation, perform field surveys, and optimize system performance. Conduct coverage analysis and adjust systems for optimal signal quality. Testing & Troubleshooting Perform system testing using spectrum analyzers and other tools, ensuring signal integrity. Diagnose and resolve issues related to cabling, signal interference, and hardware malfunctions. Project Coordination & Collaboration Oversee installation teams, providing guidance, training, and mentorship to 2-4 installers throughout the project lifecycle. Collaborate with contractors and stakeholders to meet project timelines. Communicate with cellular carriers and public safety agencies for system approvals. Compliance & Safety Adhere to OSHA regulations and industry standards (e.g., FCC, NFPA) during installations. Ensure safe work practices and system compliance with safety protocols. Client Support & Documentation Provide client training, technical support, and post-installation assistance. Maintain accurate project documentation and system performance reports. Requirements: Education & Experience High school diploma or GED required; technical degree or relevant certifications. 2-4 years of hands-on experience with cellular DAS, BDA systems, or RF communications systems. Experience collaborating with cellular carriers (e.g., Verizon, AT&T) and public safety AHJs (authority having jurisdiction) Technical Skills Proficiency with RF signal testing tools (e.g., spectrum analyzers, sweep testers, PIM testers). Familiarity with DAS components such as antennas, coaxial cables, fiber optics, and amplifiers. Knowledge of public safety standards and codes (e.g., NFPA 72, IFC, FCC regulations). Basic understanding of electrical and networking concepts (e.g., cabling, power systems, IP networking). Certifications Certifications such as iBwave Design, DAS hardware manufacturers, or NICET In-Building Public Safety (IB-PCS) certification are highly desirable. OSHA 10/30 certification or equivalent safety training. Physical Requirements Ability to work in confined spaces, at heights, and lift heavy equipment (up to 50 lbs). Willingness to travel to different job sites, which will include construction environments. Comfortable with fieldwork, including both indoor and outdoor installations. Soft Skills Strong problem-solving, attention to detail, and troubleshooting abilities. Excellent communication skills for collaborating with clients, contractors, and cellular carriers. Ability to work independently or as part of a team and manage time effectively. Licenses Valid driver's license with a clean driving record (required for travel between sites). Background check may be required for public safety system installations. Compensation: $25 - $30/Hour + Bonus Potential and Overtime (Compensation will be discussed during the interview process) Company Description Advanced Telecom Systems (ATS) specializes in turnkey solutions for public safety and cellular DAS, offering design, installation, maintenance, and testing services. We ensure reliable communication systems for emergency responders and enhanced wireless coverage for any building type or market vertical. With a focus on customer satisfaction and technical expertise, ATS delivers tailored solutions that exceed expectations, empowering clients to stay connected and protected. We offer the following cellular and public safety DAS services: Carrier Coordination - Consulting Services - iBwave Design Services - Physical Site Surveys - Public Safety Grid Testing - Public Safety Permitting (PE Sign and Seal) - RF Data Collection - System Commissioning and Optimization - System Installation Company Description Advanced Telecom Systems (ATS) specializes in turnkey solutions for public safety and cellular DAS, offering design, installation, maintenance, and testing services. We ensure reliable communication systems for emergency responders and enhanced wireless coverage for any building type or market vertical. With a focus on customer satisfaction and technical expertise, ATS delivers tailored solutions that exceed expectations, empowering clients to stay connected and protected. We offer the following cellular and public safety DAS services: Carrier Coordination - Consulting Services - iBwave Design Services - Physical Site Surveys - Public Safety Grid Testing - Public Safety Permitting (PE Sign and Seal) - RF Data Collection - System Commissioning and Optimization - System Installation

Job Description Job Description Benefits: 401(k) matching Competitive salary Health insurance Paid time off We are seeking an experienced Senior Home Technology Installer & Project Manager to lead residential audio, video, networking, smart home, and CCTV projects from pre-wire through final commissioning. This role is ideal for a highly skilled technician who is ready to take ownership of projects, lead field teams, interface with clients and builders, and ensure exceptional execution and customer satisfaction. This is a hands-on leadership role - you will both manage projects and actively participate in installation and system configuration. Key Responsibilities Project Management Lead residential AV, smart home, networking, and surveillance projects from kickoff to completion Review proposals, plans, and scope of work to ensure accurate execution Coordinate with homeowners, builders, electricians, and other trades Manage job timelines, labor allocation, and material procurement Conduct site walks and progress meetings Ensure projects are delivered on time, on budget, and to company standards Installation & Technical Execution Perform and oversee pre-wiring, trim-out, and final installation Install and configure: Distributed audio systems (e.g., Sonos, Control4, etc.) Home theaters and media rooms TV mounting and structured wiring Networking equipment (routers, switches, access points) CCTV systems (IP cameras, NVRs, remote access setup) Smart home systems (lighting control, automation, water monitoring, etc.) Terminate, label, and test low-voltage wiring Rack build-out and clean cable management System programming and client handoff Leadership & Client Experience Supervise and mentor junior technicians Maintain high installation standards and jobsite cleanliness Communicate clearly and professionally with clients Conduct system walkthroughs and training at project completion Support service department with escalated troubleshooting when needed Qualifications 5+ years experience in residential AV, low-voltage, or smart home installation Proven experience managing projects and leading teams Strong knowledge of: Home networking fundamentals (IP addressing, VLANs, WiFi optimization) Distributed audio/video systems CCTV systems and remote access configuration Structured wiring best practices Ability to read blueprints and wiring schematics Clean, organized rack-building and cable management skills Strong troubleshooting abilities Valid driver's license and clean driving record Preferred Certifications (not required but a plus): Control4, Savant, or Crestron certification Networking certifications (Ubiquiti, Araknis, Cisco, etc.) What We're Looking For A leader who takes ownership of projects Detail-oriented and quality-driven Calm under pressure and solutions-focused Professional and client-friendly Passionate about technology and staying current with industry trends Compensation & Benefits Competitive salary based on experience Performance bonuses Company vehicle or vehicle allowance (if applicable) Paid time off Ongoing training and certification opportunities Career growth into senior operations or technical leadership roles Why Join Us? We are not just installers - we are long-term technology partners for our clients. This role offers the opportunity to lead high-end residential projects, work with cutting-edge technology, and be part of a company that values quality, service, and long-term relationships. If you're ready to step into a leadership role and build exceptional smart home experiences, we'd love to hear from you.

Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description Job Description Job Title: New Technology Installer/Trainer Location: Salt Lake City, UT Job-Type: Contract to Hire Employment Eligibility: Gravity cannot transfer nor sponsor a work visa for this position. Applicants must be eligible to work in the U.S. for any employer directly (we are not open to contract or "corp to corp" agreements). Position Overview: Gravity IT Resources is seeking a Technology Installer/Trainer that can use exceptional troubleshooting, and training skills as well as a keen attention to detail to assist with the installation, support and maintenance of technical applications and equipment in sites across the U.S. and Canada. Duties & Responsibilities: Setting up new technology - any enhancements, new equipment, etc. There are two phases for most new projects: Install and/or upgrade physical equipment Teach/train the employees how to use the new equipment Duties below are common when not involved in an actual new install/upgrade project: Assist in the research, development, implementation and training of new software and hardware technologies in a Unix/Windows environment. Identify, research, and resolve technical problems. Respond to telephone calls, email, web, and personnel requests for technical support. Document, track, and monitor problems to ensure a timely resolution. Provide technical support to end users on a variety of issues. Evaluate and document new or changed computer systems. Perform other duties as assigned by Technology Development Supervisor and Management. Required Experience & Skills: Basic use of hand tools - Equipment Installation - Basic knowledge of common hand tools. The use of common hand tools is required for the installation of Alsco Production Schedule and RFID Scanning equipment. Networking experience/knowledge - Networking - Basic knowledge of routers, switches, other networked devices, and WAN circuits. Ability to configure and troubleshoot LAN, WAN, RAS, and VPN connections; familiar with cabling standards CAT 5, 6, RJ45 and RJ11 termination procedures and punch-down procedures. Networking team will have the network set up (these people will pull cat 5 cable, terminate the ends, troubleshoot any issues on connectivity, etc.) Software - Basic knowledge of configuration settings in Windows 10 and Microsoft Office 2019 & Office 365. Basic knowledge of installation/un-installation procedures of Windows Updates and other PC Software. The ideal candidate will have minimum of 2 years of IT Technical Support or Training Experience and 2 years of systems installation experience preferred. Ability to learn is huge Excellent analytical skills and the ability to research/ troubleshoot a variety of projects.

Job Description Job Description This isn't your typical AV technician position. We're looking for a highly experienced, hands-on technician who can operate at a high technical level while helping lead and develop our installation team. You'll split your time between working alongside our technicians, supervising job sites, handling advanced service calls, troubleshooting complex systems, and bringing projects across the finish line. You'll be the technical backbone of our field operations. You'll have the autonomy to make decisions, solve problems, manage your time, and take ownership of your work. At the same time, you'll make sure our installation team is performing at the level our clients expect. We want someone who leads from the front, not from behind a desk. Experience: 7+ years in residential AV / smart home integration preferred WHAT YOUR WEEK WILL LOOK LIKE We envision a balanced 40-hour workweek with four primary responsibilities. The allocations below are approximate and will shift with project schedules and service demands. 1. Hands-On Installation Approximately 10 Hours per Week • Work alongside our installation technicians on active residential projects. • Perform advanced AV installations, equipment configuration, rack builds, and system integration. • Demonstrate proper installation techniques, wire management, labeling, and workmanship. • Help troubleshoot challenging installation scenarios. • Maintain the highest standards of craftsmanship and professionalism. 2. Field Leadership & Quality Control Approximately 10 Hours per Week • Visit active job sites to supervise and inspect installation work. • Provide direction, coaching, and accountability to installation technicians. • Ensure work is completed according to PBAV standards and project specifications. • Identify mistakes before they become expensive problems. • Keep projects organized, productive, and moving forward. • Train and mentor technicians to improve their technical abilities. • Communicate project challenges, progress, and resource needs to management. You aren't expected to stand over someone's shoulder all day. You're expected to establish expectations, inspect the work, correct issues, and empower the team to perform independently. 3. Advanced Service & Troubleshooting Approximately 10 Hours per Week • Handle advanced residential service calls. • Diagnose complex AV, networking, automation, and lighting-control issues. • Troubleshoot systems that other technicians cannot resolve. • Perform programming, configuration, commissioning, and system upgrades. • Provide exceptional client-facing support. • Work directly with manufacturer technical support when necessary. • Identify opportunities for system improvements and additional services. 4. Field Travel & Project Support Approximately 10 Hours per Week • Travel between residential project sites throughout our service area. • Transport tools, equipment, and materials as needed. • Coordinate with installation teams and management. • Perform site inspections and project assessments. • Assist with project planning and technical execution. TECHNICAL EXPERTISE We're looking for someone who already has significant experience in the custom integration industry. You should be comfortable working with: • Control4: Advanced programming, troubleshooting, and Composer Pro. • Lutron: HomeWorks, RadioRA, lighting control, programming, and troubleshooting. • Networking: Ubiquiti, Access Networks, Araknis, VLANs, IP addressing, and network troubleshooting. • Audio/Video: Distributed audio, video distribution, surround sound, displays, and home theaters. • Racking: Professional equipment rack construction, termination, cable management, and documentation. • Automation: Smart home integration, system commissioning, and device configuration. • Security: Ring and other integrated residential security solutions. • Troubleshooting: Ability to diagnose complex issues across multiple manufacturers and systems. You don't need to know every manufacturer we work with, but you must have a strong technical foundation and the ability to learn quickly. WHO YOU ARE Technical Confidence You know your trade. You can walk into a complicated system, understand what's happening, and figure out how to fix it. You don't need someone holding your hand. Leadership You enjoy helping other technicians become better at what they do. You can recognize mistakes, communicate corrections, and hold people accountable without creating unnecessary conflict. Work Ethic You still enjoy working with your hands. You're not looking to spend your entire day in a truck, behind a computer, or managing people from a distance. Personal Accountability You take ownership of your projects. If something goes wrong, you don't make excuses or point fingers. You find a solution. Professionalism Our clients are often homeowners with multimillion-dollar properties. You understand that you're representing the company every time you walk through someone's front door. Attention to Detail You believe the little things matter. Clean racks, organized wiring, properly labeled equipment, clean installations, and finished projects are non-negotiable. Problem Solving You don't immediately call management when something goes wrong. You investigate, research, contact manufacturer support when appropriate, and exhaust reasonable solutions before escalating. Flexibility Some days you'll be installing. Other days you'll be supervising, troubleshooting, or helping bring a project across the finish line. You enjoy variety and can adapt. WHAT SUCCESS LOOKS LIKE Within your first 90 days, we want to see: • Our installation team becoming more efficient and technically proficient. • Improved installation quality and consistency. • Fewer callbacks and preventable service issues. • Complex troubleshooting being handled without constant owner involvement. • Projects being completed with fewer outstanding punch-list items. • Better organization and accountability on job sites. • Clients receiving an exceptional experience. • Management gaining confidence that field operations are being handled properly. Ultimately, we want you to help build a field team that takes pride in its work and operates at a high level without constant supervision. COMPENSATION & BENEFITS • Base salary of $80,000-$90,000, depending on experience and technical capability. • Performance-based bonus tied to quality, team development, and field execution. • Company vehicle. • Paid time off and sick time. • Paid birthday off. • Paid work anniversary off. • Manufacturer training and professional development. • Company lunches and team gatherings. • Opportunity to grow with an expanding company. WHY JOIN PALM BEACH AUDIO VISIONS? Autonomy & Trust We hire professionals and give them the freedom to do their jobs. We're not interested in micromanaging people. A Small, Family-Oriented Team You'll work directly with ownership and be part of a team where your contribution actually matters. Opportunity to Lead This is an opportunity to help shape our field operations, mentor technicians, and establish the standards by which our company operates. Quality Over Quantity We specialize in high-end residential integration. We want to do fewer things exceptionally well rather than rush through jobs. Professional Growth We encourage ongoing education, manufacturer training, certifications, and expanding your technical expertise. THE PERSON WE'RE LOOKING FOR Ideally, you're currently a senior technician, lead installer, or technical supervisor at another custom integration company. You've spent years in the industry. You've seen just about everything. You can troubleshoot a complicated Control4 system, program Lutron HomeWorks, build a beautiful equipment rack, and lead a crew through a demanding installation. But perhaps you're tired of working for a large company where you're just another employee. Maybe you'd enjoy being part of a smaller organization where your experience is appreciated, your voice matters, and you can actually make a difference. You don't need to own a company or manage an entire department. You just need to be exceptionally good at what you do, enjoy working with people, and take pride in delivering excellent work. If you believe in craftsmanship, accountability, teamwork, and doing things right the first time, we'd love to meet you. Company Description Palm Beach Audio Visions (PBAV) is a growing custom integration company specializing in high-performance residential audio/video, lighting control, home automation, networking, and smart home technology. We work with discerning homeowners, custom builders, designers, and contractors throughout South Florida . click apply for full job details

Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation Northern New Jersey The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)

Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation New Castle, DE and Eastern, PA The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)

Job Description Job Description Level 4 Installer to work Telecommunication properties in North/Central New Jersey. : Installation Teams working in Telecommunication MSC's for Telecommunication and Product installs All to be strong in -power running and terminating - cat cabling and RJ45 connecting -fiber running, scoping, cleaning, testing and terminating Leads must have Admin skills for daily reporting, and customer interaction Must have basic hand tools. The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3 Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments Should have good knowledge of optical routing equipment installations Should have good knowledge of fiber optic cable installation & testing practices Should have good knowledge of AC/DC power Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience Physical Demands The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.

Job Description Job Description Nationwide Travel Job Description Installer 2 The Data Center / CO Tech's primary role is to plan and implement infrastructure and services through project work for moderate complexity level requests. Essential Duties: Builds, dresses, and deploys infrastructure, and platforms installations to specifications. Work with minimum supervision Physically build the product following the hardware job specifications and drawings Required Qualifications: Experience with installing Switches & Routers and frames and infrastructure. Experience in Data Center/ CO environments Experience with Optical Networking Equipment Lead Installation Technician should have a minimum of 1-2 years Data Center/PoP/CO installation experience. Possess a good mechanical aptitude. Must possess a good knowledge of basic power tools operation. Ability to adapt to various work environments Should have a basic knowledge of optical/cable routing installation standards Basic knowledge and understanding of AC/DC power Should have basic knowledge of Data center / Central office infrastructure installation work Meet Network Equipment Installation/Quality Industry Standards Physical Demands: The employee will be required to write and handle paperwork. The employee will be required to climb and work off ladders. The employee will be required to work under raised floors. The employee may be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be required to have a vehicle to travel to customer sites The employee will be required to lift weight up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer and cable color coding, working with files & paperwork, working with tools, and working on specialized computer & networking devices.

Job Description Job Description Level 4 Installer Reports to: Installation Supervisor or Project Manager Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary : The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities : Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws.

Job Description Job Description Installation Technician Location: Based from home. (Targeting candidates that live in the South East) Pay Rate: Between $36 to $40 hourly Duration: Long-Term Contract (12 Months) with Potential for Extension or Conversion Schedule: 40 Hours per Week, with Potential Overtime Other: Extensive travel, Nationwide. (Travel Arrangements Coordinated by INSPYR Solutions) Position Summary INSPYR Solutions is seeking experienced Installation Technicians to support telecommunications and data center deployments throughout the United States . This is a hands-on, travel-based position focused on Central Office (CO), Point of Presence (POP), and network infrastructure environments . Technicians will serve as key onsite representatives, working directly with project managers, Original Equipment Manufacturer (OEM) teams, and Network Operations Center (NOC) teams to support equipment installation, testing, troubleshooting, and system turn-up . This is an anticipated 12 month contract opportunity with the potential for extension or conversion to full-time employment, based on performance and ongoing project needs. Candidates must be willing and able to travel throughout the United States as assignments require . All required business travel is coordinated and booked by INSPYR Solutions, with travel costs billed directly to the client. Client-approved meals and miscellaneous travel expenses are reimbursed weekly . Must-Have Requirements (Non-Negotiable) Minimum of 3 years of hands-on telecommunications or network equipment installation experience Experience working in Central Offices (CO), POP sites, and/or Data Centers Ability to read and interpret engineering drawings, wiring diagrams, and installation documentation Experience installing telecommunications and network equipment, including routers, switches, and transport systems Hands-on experience with fiber routing, dressing, and termination Willingness and ability to travel nationwide based on project assignments Ability to clearly explain previous hands-on installation experience, including equipment testing, troubleshooting, and turn-up procedures Nice-to-Have Qualifications DC power installation experience , including running and terminating power to racks and systems, building and installing Relay Rack Assemblies (RLAs) , performing Power Distribution Frame (PDF) to grid connections, and powering up/validating systems Experience installing and supporting optical transport and DWDM systems Experience coordinating with OEM teams and carrier NOCs during equipment installation and turn-up Familiarity with Telcordia standards and OSHA safety requirements Experience performing equipment audits, decommissioning, and system upgrades Experience using telecommunications test equipment , including Optical Power Meters, Fiberscopes, Voltmeters, and Cat6 testers Key Technical Competencies Candidates should be prepared to discuss their hands-on experience with the following: DC Power Installation & Termination: Understanding of A/B power feeds, power types, and end-to-end DC power installation processes, including rack power-up, testing, and validation Cable Lacing & Grounding: Experience lacing various cable gauges, properly routing and dressing cables, and installing grounding cables Central Office & Data Center Installations: Ability to explain specific installation activities performed in Central Office, POP, and Data Center environments OEM Equipment Installation & Turn-Up: Experience installing and supporting equipment from manufacturers such as Ciena, Infinera, Nokia, Cisco, and Juniper, including installation, testing, turn-up, and basic troubleshooting Fiber Testing & OTDR: Experience testing fiber circuits using OTDR equipment, familiarity with testing tools and models, and ability to interpret test results MPO Fiber Installation: Experience running, cleaning, inspecting, and installing MPO fiber connections while following proper handling procedures Rack & Infrastructure Installation: Experience installing cable racks, ironwork, equipment racks, and cabinets Key Responsibilities Perform installation, maintenance, testing, and troubleshooting of telecommunications equipment in Central Office, POP, and Data Center environments Install telecommunications and MSO network equipment across POP sites, data centers, huts, and repeater locations Perform fiber routing, dressing, termination, and testing in accordance with engineering specifications Support light configuration, testing, and turn-up of OEM network equipment Coordinate with OEM teams and carrier NOCs to support system activation, connectivity testing, and troubleshooting Identify and resolve installation and network connectivity issues in real time Support DC power installations and power builds, including RLAs, PDF connections, and powering systems/racks as needed Conduct equipment audits, decommissioning activities, equipment replacements, and system upgrades Read and interpret engineering drawings, wiring diagrams, and project documentation to ensure accurate installations Follow applicable safety procedures, installation standards, and quality requirements Serve as the primary onsite point of contact for project managers, site representatives, and material/logistics coordination Assist with guiding other technicians onsite to ensure installation quality, efficiency, and adherence to project timelines Maintain accurate installation records, testing documentation, and project status reports Travel & Expense Reimbursement This position requires nationwide travel to support telecommunications infrastructure projects across the United States. Travel Arrangements: Required business travel is coordinated and booked by INSPYR Solutions. Travel Costs: Travel booked by INSPYR Solutions is billed directly to the client. Meals & Miscellaneous Expenses: Client-approved meals and miscellaneous travel-related expenses are reimbursed to technicians on a weekly basis. Expense Approval: Reimbursement is subject to client approval and applicable travel and expense policies. Travel Flexibility:Technicians must be willing to travel to various project locations throughout the United Statesas assignments and business needs change. Schedule & Work Environment Work Location: Various telecommunications and data center sites throughout the United States Standard Schedule: 40 hours per week once assigned to an active project Overtime: May be available depending on project requirements; not guaranteed Project Flexibility: Ability to support additional assignments and projects during downtime Work Environment: Hands-on field installation work in Central Offices, POP sites, data centers, telecommunications huts, and other network infrastructure facilities Prescreening Questions Are you willing and able to travel extensively for this role, including overnight travel as needed? Please describe your travel availability. Do you have a valid driver's license? Are you comfortable undergoing an MVR check, drug test (including a breathalyzer if required), and background check? How many years of Central Office (CO) and/or Data Center installation experience do you have? Do you have experience installing cable racks, ironwork, and mounting equipment racks or cabinets? Please provide details. Do you have experience running power to a main BDFB, including lacing and landing cables on both ends? Please describe your experience. Do you have experience installing and terminating DC power? What types of DC power systems have you worked with? Are you experienced with cable lacing across various cable gauges, including grounding cables? Please explain your experience. How many years of cable lacing experience do you have? Do you have experience working with MPO fiber (running, cleaning, installing, or testing)? Please describe your experience. What experience do you have testing fiber circuits using an OTDR? Which OTDR equipment have you used, and how would you rate your proficiency on a scale of 1-10? What experience do you have working with telecommunications and networking equipment such as Ciena, Infinera, Nokia, Cisco, or Juniper? Please describe your installation, testing, provisioning, and turn-up experience. About INSPYR Solutions Technology is our focus and quality is our commitment. As a national expert in delivering flexible technology and talent solutions, we strategically align industry and technical expertise with our clients' business objectives and cultural needs. Our solutions are tailored to each client and include a wide variety of professional services, project, and talent solutions. By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities click apply for full job details

Job Description Job Description Central Office/Data Center Installer Level 2 Nationwide Travel Pay Rate: $23.00 - $26.00 per hour Job Description: The Data Center / CO Tech's primary role is to plan and implement infrastructure and services through project work for moderate complexity level requests. Essential Duties: • Builds, dresses, and deploys infrastructure, and platforms installations to specifications. • Work with minimum supervision • Physically build the product following the hardware job specifications and drawings working with limited supervision Required Qualifications: • Experience with installing Switches & Routers and frames and infrastructure. • Experience in Data Center/ CO environments • Experience with Optical Networking Equipment • Lead Installation Technician should have a minimum of 1-2 years Data Center/PoP/CO installation experience. • Possess a good mechanical aptitude. • Must possess a good knowledge of basic power tools operation. • Ability to adapt to various work environments • Should have a basic knowledge of optical/cable routing installation standards • Basic knowledge and understanding of AC/DC power • Should have basic knowledge of Data center / Central office infrastructure • Meet Network Equipment Installation/Quality Industry Standards Physical Demands: • The employee will be required to write and handle paperwork. • The employee will be required to climb and work off ladders. • The employee will be required to work under raised floors. • The employee may be required to cut and drill metal and concrete. • The employee must be able to distinguish between different colors. • The employee will be required to have a vehicle to travel to customer sites • The employee will be required to lift weight up to 50 pounds. • Vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer and cable color coding, working with files & paperwork, working with tools, and working on specialized computer & networking devices.

Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description Job Description Smart Home Installer: Tired of doing the same work each day. Tired of not learning anything. Tired of not knowing how you can make a difference. Tired of working retail hours. Want to put your skills to use and learn each day. Want to work with a diverse team including engineers, actors, IT professionals, Audio Professionals, Lighting Designers Want to have regular pay plus commission. Check out working with the PEMBA team. We value teamwork, continuous learning and life and hard-work. Please submit a cover letter stating your interests. PEMBA sells, designs, programs, and installs automation systems which include audio-video equipment in residences and businesses. We are looking for someone who wants to join our team to install, troubleshoot and design audio-video equipment lighting control and automation equipment and various other equipment and systems. PEMBA's culture and entrepreneurial spirit have earned us recognition as a great company to work with. We value diversity. We strive for and value providing excellent service and technical knowledge to our customers. We are a fast paced company and being able to multitask is a must. You will always learn while at PEMBA and will feel lots of self worth for the projects that you help to light. If you have a mind that is delighted with learning new things or want to apply your creative talents you will love working at PEMBA. We work regular work hours 8am to 5pm and do remotely support customers after hours when we see that they need help. You can see by the skills list below the diversity of what you will be doing and learning each day. Skills Required: Experience planning the cabling for installation in new construction and renovations for audio, networking, video, and automation systems (cat6, fiber, DMX and specific systems cables). Knowledge of Audio equipment performance ability to recommend quality audio solutions. Experience with Automation systems such as SavantAV, Crestron Home, URC and Control4. Experience setting up audio-video equipment (including receivers, amps, speakers, video distribution, HDMI video distribution, wireless microphones). Experience with planning and installing audio and video for commercial spaces such as conference rooms, restaurants, and churches. Experience pulling and terminating cat6, coax and speaker cables. Understanding of how to build out the equipment in the rack. Experience using a desktop computer and various software products and putting that computer on a network. Understanding of basic networking. Skills Desired: Have installed Sonos, Denon Heos, Crown Amps, TruAudio speakers, landscape speakers, or similar. Experience with programming of Radio Ra, Homeworks, URC, RTI, Elan, Crestron Home, DMX Lighting, ETC, and or Savant. Experience working with network routers, switches and wireless access points and designing networks. Experience or knowledge with video switching and video tiling. Experience using Excel to create bills of materials and quotes. Experience with selling lighting, lighting controls, automated shades, and electrical equipment. Experience setting up phone apps. Experience posting social media notices or advertisements. Enjoy working with people. Enjoy learning every day. Have your own laptop/desktop. Benefits include: Vacation, sick leave, Holiday pay, medical dental and vision insurance. Only those interested in this position should apply. If you are submitting your resume for your unemployment quota, please include keyword "quota" in your cover letter.

Job Description Job Description About Us Stimulus Technologies is a leader in technology services, dedicated to bridging the digital divide in underserved communities. With operations across California, Missouri, Nevada, New Mexico, and Oregon, we deliver high-speed, reliable connectivity that transforms lives and businesses. We also offer IT, VoIP, and CyberSecurity services to a range of clients. Position Overview Description Stimulus Technologies is seeking a dependable and technically skilled Fiber / Wireless Installer to support the installation, maintenance, and troubleshooting of fiber and wireless communication systems and network infrastructure. This role blends hands-on fiber and wireless installation with foundational IT/network support. The ideal candidate is comfortable working at heights, has experience working with customers and can perform installation services for fiber service delivery, wireless service delivery, and possesses a solid understanding of IT and networking systems. Key Responsibilities Fiber Optics (Preferred / Plus) Assist with basic fiber installation, termination, or troubleshooting Perform testing using power meters or other tools (if experienced) Work alongside fiber teams when needed Wireless & Network Systems Install and configure wireless backhaul and point-to-point/point-to-multipoint systems Troubleshoot signal, interference, and connectivity issues Assist with commissioning and testing of wireless networks Work with RF and networking teams to optimize system performance IT & Technical Support Configure and troubleshoot routers, switches, and network devices Support basic LAN/WAN infrastructure and IP connectivity issues Assist with device setup, firmware updates, and remote access systems Maintain documentation of network configurations and installations Tower Climbing & Wireless Installation Climb telecommunications towers (200-500+ ft) to install, maintain, and upgrade antennas, radios, and cabling Install and align wireless equipment including microwave dishes, LTE/5G radios, and access points Perform cable installation (coax, power, grounding) and weatherproofing Follow all safety protocols and perform site inspections Education and Experience Required Basic understanding of networking concepts (IP addressing, routers, switches) Ability to work at heights and in outdoor environments Strong mechanical aptitude and troubleshooting skills Valid driver's license Ability to pass background check Preferred (Nice to Have) Fiber optic experience (splicing, testing, or installation) Experience in tower climbing Certifications such as: OSHA 10/30 ComTrain or tower safety certification CompTIA A+, Network+, or similar Experience with ISP, WISP, or telecom environments Knowledge of RF fundamentals and wireless technologies Skills & Competencies Strong problem-solving and troubleshooting ability Ability to work independently and in a team environment Attention to safety and detail Good communication and documentation skills Adaptability in fast-paced field environments Physical Requirements Ability to climb towers and work at significant heights Lift and carry 50-75 lbs of equipment Work outdoors in varying weather conditions Alignment with Core Values At Stimulus Technologies, our core values define how we work. The ideal candidate will demonstrate: Driven to Grow - Continuously seeks to develop professionally, stays current with industry practices, and pushes to improve processes and outcomes. See a Need - Fill a Need - Proactively identifies gaps, obstacles, or opportunities and takes action without waiting to be asked. Elevate Others - Mentors teammates, shares knowledge freely, and actively contributes to a positive and collaborative work environment. Extreme Ownership - Takes full accountability for results, decisions, and mistakes; does not deflect blame or make excuses. Celebrate Success - Recognizes contributions of team members, acknowledges milestones, and fosters a culture where wins are shared. Stimulus Technologies is an equal opportunity employer. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. Management reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.

Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.

Job Description Job Description Level 4 Installer Reports to: Installation Supervisor or Project Manager Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary : The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities : Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws.