83 jobs found

Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.

Job Description We're hiring an experienced RAN Technician to install, integrate, test, and maintain cellular radio access network equipment and the IP routing infrastructure behind it. This is a hands-on field role you'll be at cell sites, equipment shelters, and rooftops across the Denver metro, keeping wireless service running and restoring it fast when it isn't. What you'll do Install, commission, integrate, and maintain RAN equipment baseband, radio, antenna, power, and transmission components. Troubleshoot across radio, router, and transport domains using alarms, logs, performance data, and test equipment. Configure and validate radio parameters and Ethernet/IP connectivity per approved designs and change procedures. Support routers and transport devices: interfaces, VLANs, IP addressing, static and dynamic routing, QoS, and synchronization. Run fiber, copper, RF, and Ethernet testing; isolate faults; and coordinate corrective action with engineering, operations, and field teams. Perform software upgrades, hardware replacements, site acceptance testing, and preventive maintenance. Document configurations, test results, site conditions, and incidents accurately. What you bring Ability to lift 50 lbs. Associate degree in telecommunications, electronics, networking, or a related field or equivalent military/industry experience. Hands-on experience installing, maintaining, or troubleshooting cellular RAN equipment. Experience with LTE RAN platforms and network management or commissioning tools (Nokia or Ericsson preferred). Working knowledge of RF fundamentals, antennas, feeders, fiber optics, grounding, power systems, and site alarms. Practical router and IP networking experience Ethernet, VLANs, IPv4/IPv6, routing, QoS, and basic packet analysis. Able to read network diagrams, site drawings, method-of-procedure documents, alarm data, and technical manuals. Valid driver's license and ability to travel to field locations. Nice to have Nokia AirScale radio and baseband; Nokia service routers or comparable carrier-grade routing platforms. LTE and 5G NR architecture, fronthaul/backhaul, timing and synchronization, microwave transport. Certifications in Nokia technologies, routing/switching, fiber optics, RF, or tower safety. Carrier, utility, public-safety, or other high-availability network environment experience. Details Location: Henderson, CO field based, mostly onsite; company truck provided for site-to-site travel (no overnight travel) Schedule: standard hours, with occasional nights/weekends for planned maintenance windows Contract: 12 months, potential to extend or convert full-time W-2 position Interview process: 1-2 rounds

Job Description South Florida. On-site and field-based, working on boats, at the dock and on the water. Travel regularly for installations, demos and events. 75k-100k depending on experience, plus full benefits. Note: a genuine marine or marine electronics background is a hard requirement. Applications without demonstrable hands-on experience working on vessels will not be considered. SEA.AI builds AI and machine vision systems that give crews an accurate picture of what's around their vessel, deployed on commercial, defence and recreational vessels worldwide. We're expanding our Field Service and Application Engineering team in South Florida. You'll be the technical backbone of our sales activity in the Americas and own the technical delivery of our systems, from demos and sea trials to installation, commissioning and support. You'll sit within our Service department and work closely with Sales, Quality and Product Management. ' Install, commission and troubleshoot our AI machine vision systems onboard commercial, defence and recreational vessels, including elevated and masthead mounting Plan, set up and run live demonstrations, sea trials and customer evaluations, on the water and at trade shows Act as the technical point of contact for the sales team and customers, scoping configurations and supporting pre-sales and post-sales Support integration with onboard equipment, working with shipyards, integrators and partners Provide remote and on-site technical support Manage a pool of demo equipment in the Americas, including logistics, stock and maintenance Feed field issues and product requirements back to R&D, Product Management and Quality Represent SEA.AI at trade shows and industry events (Miami International Boat Show, International WorkBoat Show), staffing the booth and running live demos Hands-on experience working on boats and vessels. This is a hard requirement. We're looking for someone from a marine background (marine electronics installer, shipyard technician, marine electrician, Navy or Coast Guard electronics technician, or similar) Practical experience installing or servicing marine electronics (radar, AIS, ECDIS, VHF, EO/IR cameras, or similar) Comfortable running on-water and trade-show demos and presenting to technical and operational audiences Comfortable working aboard vessels at the dock and underway, and with elevated or masthead installations Working knowledge of marine electrical systems (AC and DC) and marine networking (NMEA, Ethernet) Technical education in electronics, mechatronics, IT or a related field, or equivalent hands-on marine experience Solid hardware, networking and software troubleshooting skills Strong customer-facing and presentation skills Well organized, able to work independently and proactively Willingness to travel frequently Must be legally authorized to work in the United States NMEA 2000 / NMEA 0183 experience, or NMEA installer certification ABYC certification or equivalent marine credentials Experience supporting sales (technical proposals, tender responses, trade-show booths, demos) Familiarity with EO/IR camera systems and embedded hardware Basic IP networking knowledge (IP cameras, switches, routers) Project coordination experience Interest in AI-based technologies Military, Coast Guard or defence-industry background ? 75k-105k depending on experience, skills and qualifications Medical insurance with 100% employer contribution, 20 days PTO, 401(k) with 4% match Work with cutting-edge maritime camera and AI technology Direct impact on customer success and product reliability A team of around 75 across five countries, small enough that what you do here visibly changes the company Travel to our offices in Austria, Germany, France and Portugal, and to customers worldwide

Job Description Gromelski and Associates, Inc. (GAI) partners with prime contractors to provide professional services. Key service areas include Engineering Design and Documentation; Software Development and Testing; System Integration, Testing and Evaluation; Lab Management and Field Installation; Integrated Logistics Support, Training Development and Delivery, Multimedia Support, and Technical System Support. Field Installer Job Description: Installs, operates, maintains, repairs, and modifies imaging equipment on-board US Navy submarines. Performs maintenance and technical support activities at customer and/or field locations for imaging system and subsystem equipment and software. Troubleshoots and diagnoses malfunctions to eliminate problems in minimum time. Removes, upgrades, and installs engineering field changes to equipment. Maintains positive communications and relations with the end customer. Provides onsite training of customer personnel as needed. Provides technical services in support of, but not limited to, the AN/BVY-1 Integrated Submarine Imaging System for US Navy submarines. Field Support Technician responsible for the introduction of the latest technology to the US Navy Submarine Fleet. Provide services following our customer's direction to perform Fleet/NAVSEA tasking including system removal and installation, system software/hardware support, on-board troubleshooting (including fiber optic and system networking support), corrective maintenance actions, and on-board maintenance training. Work requires personnel to be travelling approximately 50% of the time. Field Installer Required Skills: Journeyman level knowledge or better in Server Base Processors and Networks. Must be a self-starter able to work independently with little supervision. Possess excellent communication and writing skills and enjoy working in a fast-paced environment. Field Installer Highly Desirable Skills: Prefer a USN Submarine Electronics or Sonar Technician with experience across multiple platforms and systems. Operational, maintenance, and troubleshooting skills for a variety of platforms to include Los Angeles, SSGN, and Virginia Class sub-systems. Fiber Optic Certification. Field Installer Additional Requirements: Candidates must be able to obtain and keep a DoD Secret Clearance which means you must be a U.S. Citizen. Proactive/self-starter. Task driven with ability to work independently. Team player that takes ownership and develops relationships that foster team success. Job Location : Manassas, Virginia (Relocation Assistance Available) Benefits: We offer a competitive benefit package. Click here Careers GAI () for more information Contract Term : 40 hours/week, onsite and 50% Travel Start Date : Negotiable Salary Range : $97,500 - 107,500

Job Description Job Description Responsibilities Diagnose and troubleshoot hardware and software issues on mobile devices. Perform repairs on smartphones and tablets, including screen replacements, battery changes, and internal component repairs. Provide technical support to customers regarding device functionality and software issues. Analyze device performance to identify potential problems and recommend solutions. Maintain accurate records of repairs and services performed. Keep up-to-date with the latest mobile technology trends and repair techniques. Collaborate with team members to improve service processes and customer satisfaction. Ensure compliance with safety standards while handling electronic equipment. Requirements Proven experience in Phone/tablets/computer repair, particularly with mobile devices. Proficiency in troubleshooting software issues on Android and iOS platforms. Familiarity with Mac OS and Windows operating systems is a plus. Strong analytical skills to assess device issues effectively. Excellent communication skills for providing technical support to customers. Ability to work independently as well as part of a team in a fast-paced environment. Previous field service experience is preferred but not mandatory. A passion for technology and staying current with industry advancements. Join us as a Mobile Phone Technician where your skills will make a difference in the lives of our customers!

Job Description Job Description Company Description Our client, an established electronic security systems integrator, is looking for an experienced Installation & Service Technician to support commercial customers throughout Northern Nevada. This role involves a combination of installation, programming, troubleshooting, and servicing electronic security systems, including access control, video surveillance, and intrusion detection. Job Description Key Responsibilities Install, program, test, commission, troubleshoot, and service commercial electronic security systems. Work with access control, CCTV/IP video surveillance, and intrusion detection systems. Diagnose and resolve hardware, software, networking, and system integration issues. Respond to service calls, preventative maintenance requests, and emergency repairs. Perform system upgrades, equipment replacements, and modifications to existing installations. Read and interpret blueprints, wiring diagrams, and technical documentation. Complete system start-ups, testing, commissioning, and customer training. Coordinate with project managers, other technicians, and customers to ensure successful project completion. Maintain accurate service reports, installation documentation, and project records. Qualifications 3+ years of experience installing, servicing, or programming commercial electronic security systems preferred. Hands-on experience with access control, CCTV/IP video, and intrusion systems. Strong troubleshooting skills with electronic hardware, software, and networking. Ability to read blueprints, wiring diagrams, and technical specifications. Comfortable working independently on installation projects and service calls. Strong communication and customer service skills. Valid driver's license and ability to travel throughout Northern Nevada. Preferred Technical Experience Access Control: Lenel, Software House, Genetec, AMAG, S2 Video Surveillance: Genetec, Milestone, IP camera systems Intrusion: DMP, Bosch Additional: Networking, system integration, programming, and commissionin Additional Information Competitive compensation based on experience Comprehensive benefits package Paid time off and holidays Retirement savings plan Professional development and training opportunities Opportunities for long-term career growth

Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PIdba59c92103e-0987

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Description: Company Overview At Opus IVS, our mission is to drive advancement in the automotive industry by assisting customers with complex vehicle repairs. Guided by our core values of Customer Focus, Innovation, Collaboration & Teamwork, and a Results-Driven approach, we continually strive to develop advanced technology that empowers us to fulfill our mission. Opus IVS technology & products has been a leader in the industry since the late 90's. Opus IVS offers modern collision shops an integrated platform of leading diagnostics and calibration solutions, anchored by expert technicians and cutting edge, patented technology. Position Summary The Senior Hardware Engineer will help develop state of the art vehicle diagnostic equipment and communication devices. This individual will work directly with Opus IVS's various technology departments to develop world-class diagnostic tools that meet and exceed our customers' needs. Responsibilities: Develop new embedded automotive diagnostic pass-thru products (PC boards and firmware). Build diagnostic systems including PC hardware, vehicle communication hardware, and battery management hardware. Develop new products/devices, features, and improve quality for new and existing hardware, firmware, and software. Improve code quality through writing unit tests, automation and performing code reviews. Design and develop product and protocol validation tests. Build product tools using C, C++, & C#. Test new designs and find solutions to issues. Create test systems for the new products. Implement new vehicle protocols and create test suites to confirm their operation. Interface with customers to collect information on the performance of our products. Other duties as assigned. Skills & Abilities : Customer Focus: Ability to understand and respond to the needs of customers with professionalism and care. Innovation: Ability to generate and apply creative ideas that improve work processes or add value. Collaboration & Teamwork: Ability to build cooperative relationships and contribute to group success. Results Driven: Ability to maintain a strong focus on achieving goals and delivering impactful results. Technical Aptitude: Ability to understand and use specific tools, systems, or technologies relevant to the role. Detail Oriented: Ability to focus on details, ensuring accuracy and precision in work tasks. Analytical Thinking: Ability to examine data and issues logically to draw insightful conclusions. Requirements: Qualifications: Bachelor's Degree in Hardware Engineering or related field; or equivalent experience plus education/training 7+ years' experience in hardware design or development Experience developing products using the ARM family of processors Strong understanding of electronic design for EMC / EMI compliance Strong knowledge of hardware design and components including MPUs, UART, CAN, LIN, A/D, D/A converters, RAM/Flash memories, and other digital electronics Experience with designing processors, power supplies, communication, analog, and digital electronic circuits Strong knowledge and experience of C, C++, and C# programming languages Ability to debug electronic circuits Ability to solder surface mount components onto a PC board Has knowledge about OBD (On Board Diagnostics) Experience with batteries and battery maintenance circuits Familiar with the SAE J2534 specification Some experience with USB, Bluetooth, and Wi-Fi connections Knowledgeable of Automotive diagnostic protocols Familiarity with Jira and Confluence WHAT WE OFFER: Competitive Pay: We know your value and we're not afraid to pay for it. We offer a competitive total compensation plan including salary, bonuses, tuition reimbursement, and a match contribution to your 401k. Time Off: Besides our competitive paid time off package, employees receive paid holidays and floating holidays. Benefits: We offer a comprehensive benefits package, including all the necessities such as medical, dental, and vision. Opportunity: to be a part of a fast-growing company working to make the world safer! We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability status or any other characteristic protected by state, federal, or local law. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of the job, the employee is regularly required to use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk or hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Compensation details: 00 Yearly Salary PIdba59c92103e-0987

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Powered by SonicJobs (an advertiser on JobG8). By applying, you consent to share your data with SonicJobs and the employer. JobG8 or SonicJobs does not store or use your application data beyond facilitating the application. See CAE Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

Job Description Job Description Job description Must be comfortable with a lot of travel. Candidates will need to be working out of different locations within a 72 hour notice. Client will provide all travel arrangements. Position summary The Traveling Data Center Installation Technician travels to customer sites to support new data center launches, expansions, and equipment deployments. The technician receives, moves, assembles, positions, and equips server racks and cabinets, also referred to as data towers, according to approved layouts and instructions. The position supports safe, accurate project completion through component installation, cable routing, inventory control, quality checks, and installation records. Essential duties and responsibilities Receive, unpack, inspect, and stage racks, servers, network equipment, cables, and installation materials. Report shortages, damage, and discrepancies. Move and position racks and cabinets using approved rack movers, pallet jacks, lifting devices, and team handling methods. Verify placement against floor plans and measurements. Assemble racks and install rails, brackets, shelves, panels, and cable management hardware using appropriate tools and specified torque requirements. Mount servers and authorized components in designated rack positions following installation drawings, manufacturer instructions, and customer standards. Route, secure, dress, and label copper and fiber cables; make approved connections while protecting cable bend radius, connectors, airflow, and service access. Perform assigned visual inspections and basic installation or connectivity checks within the technician's training and authorization. Escalate defects and technical issues to qualified personnel. Record asset identifiers, serial numbers, rack locations, completed tasks, and discrepancies in inventory systems, work orders, and installation checklists. Coordinate with deployment leads, customer representatives, warehouse teams, and technical staff to sequence work and meet project milestones. Follow site access, confidentiality, asset protection, and data security requirements. Use required personal protective equipment and electrostatic discharge controls. Follow applicable equipment handling, electrical safety, and energy isolation procedures. Stop and report unsafe work. Operate powered material handling equipment only after required training and site authorization. Use mechanical assistance and team handling for heavy or awkward equipment. Maintain clean, organized work areas, remove packaging, and segregate waste under site procedures. Complete handoff records and support resolution of installation punch list items. Perform related deployment or assigned home site duties consistent with training and business needs. Scope of authorized work Electrical circuit installation energized electrical work, equipment energization, and advanced server or network configuration require separately qualified and authorized personnel. This role performs only tasks within the approved project scope and the employee's training. Required qualifications High school diploma or equivalent, or equivalent relevant training and experience. At least one year of related experience in data center deployment, server rack assembly, hardware installation, electronics assembly, structured cabling, or comparable equipment installation. Ability to read work instructions, rack elevations, floor plans, diagrams, part numbers, and installation checklists. Ability to use hand tools, approved power tools, and measuring devices safely and accurately. Basic computer skills for inventory transactions, work orders, email, and project documentation. Ability to travel for extended assignments and work assigned schedules, including nights, weekends, and overtime when required. Strong attention to detail, dependable attendance, clear communication, and ability to collaborate with different site teams. Preferred qualifications Experience in customer data centers or large-scale technology deployment environments. Familiarity with server components, rack hardware, copper and fiber cabling, asset tracking, and electrostatic discharge precautions. Relevant technical training or certifications such as CompTIA A+, structured cabling training, or material handling equipment training. Travel and scheduling expectations This traveling field position requires frequent overnight travel and temporary assignments away from the employee's home location. Travel percentage, assignment duration, reporting location, and work schedules will be communicated before deployment and may change with customer project needs. Between deployments, employees may support an approved local site in related operational duties. Travel arrangements, lodging, eligible expenses, and applicable allowances follow the approved company travel policy. Employees must accurately record all work and travel time as instructed. Travel time and overtime will be paid as required by applicable law and company policy. Physical demands and work environment Essential functions involve prolonged standing and walking, bending, kneeling, reaching, handling tools and small components, and pushing or pulling equipment with approved aids. Work may include lifting and carrying components up to 50 pounds, and accessing racks from approved platforms or ladders. Heavy or awkward items require mechanical assistance or team handling. Specific lifting limits and task frequencies must be confirmed through the site job assessment. Work occurs in data centers, staging areas, and warehouse or active deployment environments with equipment noise, temperature variation, restricted access, and nearby material handling activity. Employees must follow applicable site safety rules. Essential functions may be performed with or without reasonable accommodation. Performance expectations Complete installations accurately and within agreed project milestones. Maintain reliable asset and task records, promptly report discrepancies, and minimize avoidable damage and rework. Demonstrate safe work practices, protect customer assets and information, and communicate respectfully with colleagues and customers.

Job Description Job Description DATA CENTER TECHNICIAN Location; Santa Clara, CA JOB DESCRIPTION The Data Center Technician is responsible for supporting the day-to-day physical operations of Multi-Business Engineering (MBE) product labs in Santa Clara. This role focuses on hardware installation and removal, rack-and-stack activities, inventory control, shipping and receiving, equipment handling, and maintaining a clean, safe, and organized lab environment. The technician will work closely with engineering, IT infrastructure, logistics, and facilities teams to ensure that lab equipment is properly received, tracked, deployed, stored, relocated, and shipped as required. The ideal candidate is hands-on, detail-oriented, and capable of managing physical lab operations efficiently in a fast-paced engineering environment. KEY RESPONSIBILITIES Racking and Stacking Rack and un-rack servers, network switches, storage devices, and other lab equipment. Install rack rails, mounting brackets, shelves, and related hardware. Perform physical installation and removal of equipment according to provided instructions and rack layouts. Connect and organize power cables, Ethernet cables, and fiber-optic cables as required. Assist with server relocations, rack reorganization, and lab hardware deployments. Inventory and Asset Management Maintain accurate inventory records for servers, switches, components, cables, and other lab equipment. Record equipment details, including asset tags, serial numbers, model numbers, quantities, and locations. Shipping and Receiving Receive incoming hardware shipments and verify items against purchase orders, packing slips, and delivery documentation. Inspect incoming equipment for visible damage and report discrepancies or missing items. Unpack, label, and register received hardware in the inventory system. Prepare servers, components, and other equipment for shipment, return, or relocation. Lab Cleanliness and Organization Maintain a clean, orderly, and safe engineering lab environment. Keep racks, workbenches, storage shelves, and equipment staging areas organized. Perform routine lab housekeeping, including removing packaging materials and disposing of waste according to lab procedures. Hardware Handling and General Lab Support Assist with hardware deployments, equipment relocations, and lab setup activities. Perform visual inspections of servers, boards, cables, and hardware components. Assist engineering teams with staging and organizing equipment for testing and validation. Work independently on assigned tasks and coordinate with cross-functional teams to complete requests on time. QUALIFICATIONS Education High school diploma or equivalent required. Associate's or Bachelor's degree in Information Technology, Electronics, or a related technical field preferred. Required Skills and Experience Hands-on experience installing, mounting, and removing servers, switches, and other hardware in equipment racks (racking and stacking). Experience tracking server hardware, components, cables, and lab assets while maintaining accurate inventory records. Experience with receiving, inspecting, documenting, labeling, packing, and shipping hardware and equipment. Ability to maintain a clean, organized, and safe lab environment, including proper cable management and equipment organization. Ability to safely handle IT equipment, follow established procedures, and coordinate effectively with engineering, logistics, and facilities teams. Technical Knowledge and Proficiencies Familiarity with server racks, rack rails, mounting hardware, and cable management accessories. Knowledge of servers, switches, storage devices, and other data center equipment. Experience using barcode scanners, asset tags, and inventory tracking systems. Familiarity with inventory management tools, spreadsheets, and asset management platforms such as GLPI. Knowledge of shipping and receiving documentation and package tracking systems. Basic understanding of Ethernet, fiber-optic, and power cables, as well as rack power distribution units (PDUs). Basic knowledge of server hardware components, including CPUs, memory, storage drives, and power supplies. Company Description Platinum Resource Group is a professional level consulting firm, providing resources to Fortune 1000 client companies in the areas of technology, human resources, accounting, finance, business systems and supply chain, on a contract and interim basis. PRG has operations in Orange County, San Diego, Los Angeles and San Francisco. As a W-2 employer we offer our consultants direct deposit bi-weekly payroll, health, dental, vision benefits, and referral bonuses. Company Description Platinum Resource Group is a professional level consulting firm, providing resources to Fortune 1000 client companies in the areas of technology, human resources, accounting, finance, business systems and supply chain, on a contract and interim basis. PRG has operations in Orange County, San Diego, Los Angeles and San Francisco. As a W-2 employer we offer our consultants direct deposit bi-weekly payroll, health, dental, vision benefits, and referral bonuses.

Job Description Job Description WHY WE EXIST: At ER2 , we desire to grow a sustainable company that provides opportunity for individuals to continuously improve and grow. WHAT WE DO: We partner with organizations to manage their technology needs from start to finish-from purchasing and deploying new devices to tracking equipment and responsibly disposing of outdated technology. When technology can be refurbished, our sister company, Revive IT, helps give it a second life through testing, refurbishment, and resale. We also donate refurbished devices to under-resourced communities, helping bridge the digital divide while keeping usable technology out of landfills and creating a lasting positive impact beyond our business. Our mission is to grow a sustainable company that provides opportunities for individuals to continuously improve; our vision is to empower uniqueness. Our core values are: Constantly Improving, Acting in Humility, Living a Life of Servanthood, and Relentlessly Pursuing Excellence. THE OPPORTUNITY: The Monitor Refurbishment Technician is responsible for testing, evaluating, and refurbishing computer monitors to ensure they meet established quality and functionality standards. This position will assess the value, functional condition, and cosmetic condition of monitors and assign appropriate grades based on company guidelines. Key responsibilities include organizing, cleaning, and maintaining department inventory; processing items into inventory; conducting cycle counts; performing quality control inspections; and maintaining accurate inventory levels. The technician will also fulfill customer orders, prepare and package monitors for shipment, and build wholesale lots according to customer requirements. Additionally, this role will assist with training and mentoring other employees and temporary labor, ensuring team members understand proper testing, refurbishment, grading, quality control, and workflow procedures. HOURLY: Monday - Friday, 7:30 AM - 4:30 PM with a 1 hour unpaid lunch break. Reports to: Memphis Production Lead Compensation: $21 - $23 Hourly Location: Memphis, TN THE PERFECT FIT : Detail Oriented: Accuracy and maintaining standards are key. Applying correct SKU's and accurate inventory management is crucial. Must have a keen eye for identifying defects. Team Player : The candidate must be highly flexible and adaptable. Must be willing and able to change priorities quickly and flex into other departments as needed. No job is underneath them. Must be able to work in a collaborative environment where everyone pulls their weight. Must pull no stops on meeting client ship date requirements. Long-Term: We're not looking for someone who's half-invested. Our team is growing FAST and we want you to grow with us. The right candidate will be looking to contribute for the long haul. KEY SKILLS: Strong attention to detail and quality control skills Ability to work efficiently in a fast-paced environment Excellent problem-solving and troubleshooting abilities Strong teamwork and communication skills Flexibility to adapt to changing priorities Commitment to continuous improvement and excellence THE DAY TO DAY : Clean and maintain supplies, tools, equipment, and storage areas to ensure compliance with safety regulations. Assess value of incoming gear Organize and sort production lanes Test monitors and other electronic devices SKU products Put items into inventory Pick and ship daily incoming orders Identify process bottlenecks Ongoing communication across departments THE VITALS : Knowledge of computer hardware Knowledge of inventory management systems Skilled in researching specific models and assessing value Knowledge in standard shipping methods Skilled in SKU'ing devices accurately Skilled in following standards PHYSICAL REQUIREMENTS: The ability to lift, push, pull, or carry heavy objects as needed 50+ lbs. Ability to work and look at a computer screen for extended hours per day. Ability to sit and/or stand for consecutive hours. Ability to work in a climate-controlled warehouse environment with some temperature fluctuations, moderate noise, and a fast-paced, busy atmosphere. OTHER REQUIREMENTS: The ability to speak/read English fluently Legally authorized to work in the United States Valid Drivers License The ability to pass a drug test The ability to pass a background screening with no prior convictions related to theft or cybercriminal activity. The ability to perform all work related duties free from any type of impairment. Clean criminal record and completely drug free WHY YOU'LL LOVE WORKING AT ER2: Full Comprehensive Benefits Package: Including medical, dental, vision, life insurance and many other supplemental coverages. 401(k) with company match (after just 90 days of employment!) Paid Time Off & Paid Holidays Competitive compensation Team-First Culture! No task is beneath anyone. We all pitch in where needed-even our CEO helps clean and restock bathrooms! Professional & Personal Growth and Development Opportunities Have a voice and make an impact! We empower our teammates to take ownership, think creatively, and drive meaningful improvements across the company. BEFORE YOU APPLY Please review our careers page at ER2 Careers to learn more about our hiring process and what to expect moving forward. Spoiler Alert: The next step is a one-way video interview! After applying , please add to your email contacts so you do not miss communication from us. ER2 is proud to be an equal opportunity employer. We are a diverse group of individuals from all walks of life with the unified desire to Empower Uniqueness and make a difference. All employment is decided on the basis of qualifications, merit, and business need. If you need assistance or an accommodation due to a disability, you may contact us at Disclaimer: This job description is not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization. Privacy Disclaimer: As part of your job application, we collect and process certain personal information about you. This information may include your contact details, work history, education, references, and other information relevant to assessing your qualifications. We collect this information solely for recruitment, hiring, and employment-related purposes. We do not sell your personal information.

Job Description Job Description Company Overview For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Great River Technology (GRT) located in Albuquerque, NM, a wholly owned subsidiary of Data Device Corporation, is a leader in high performance digital video and data development tools and services for the mil/aero industry. Since it's founding in 1996, it has developed partnerships with leading commercial and military companies worldwide. This position is 100% onsite at GRT in Albuquerque, NM. Due to U.S. export control requirements, this position is open only to candidates who qualify as a "U.S. Person." This generally includes U.S. citizens, U.S. nationals, lawful permanent residents/green card holders, and certain protected individuals, including refugees and asylees. Description The Electronic Hardware Assembly Technician applies comprehensive technical knowledge to assemble, modify, install, troubleshoot or repair various electronic components for ground and airborne applications. The role requires a proactive, organized, and professional individual who can manage a variety of technical tasks and responsibilities, often in high-pressure and time-sensitive situations. The Technician receives guidance, as needed, from a supervisor or engineer. Responsibilities The responsibilities noted below are not all-inclusive, they are core responsibilities subject to change based on the needs of GRT. Assembly and Test Ability to read and follow information on work instructions. Completion of second operations on populated electronic circuit boards. Execute additional assembly steps such as loading firmware. Execute final acceptance testing of product. Prepare finished products for shipment. Troubleshoots and repairs ground and airborne electronic equipment. Able to install Input / Output connectors, solder and removal of SMT devices. Other Diagnoses, repairs or replaces electronic components as required. Maintains required records and forms in accordance with company and customer specifications. Can manage and work through competing priorities, often with little supervision. Collects data, conducts research, and compiles information relevant to engineering projects or other business objectives. Work with Engineering on card modifications during prototyping and product development. Work with environmental equipment to test products through temperature cycles and vibration testing. Requirements: High school diploma or equivalent. AS degree in Electronics Technology or other closely related field preferred, but not required. Soldering skills. IPC J-STD-001 and/or IPC-A-610 certification a plus, but not required. Experience inspecting, troubleshooting, and repairing electronic assemblies, circuits, and circuit boards. Experience assembling, installing, routing, terminating, soldering, and repairing electrical wiring harnesses or a variety of electrical components and equipment. Able to read and interpret schematics and drawings. Familiar with Quality Systems, Voltmeters, Oscilloscopes, and test equipment. Discerns colors and numbers. Works under limited supervision. Experience working in an engineering or manufacturing environment. Complies with ESD and other Quality standards. Proficient with MS Office Suite. Able to lift up to 25 pounds. Join us as an Electronic Hardware Assembly Technician and become part of a team dedicated to advancing aerospace technology through meticulous craftsmanship and innovative engineering. We value your skills in creating reliable and rugged electronic systems that meet the highest industry standards! Benefits: 401(k) Dental insurance Employee assistance program Flexible schedule Flexible spending account Health insurance Health savings account Life insurance On-the-job training Paid sick time Paid time off Parental leave Professional development assistance Retirement plan Tuition reimbursement Vision insurance and much more

Job Description Job Description Fiber and Copper I&R Telecommunication Tech Skill Requirements Experience in telephone service Experience in CATV installations. Knowledge of Coax cable sizes and types. Experience with test sets Experience routers and home networking. Technical understanding of loss, attenuation, and tiling. Working within attics and crawl spaces. Computer skills Maintains/repairs and tests copper cable in an underground, aerial, or buried environment. Troubleshoots problems that will require copper repair, copper maintenance, copper slicing, faultfinding, etc. Splice existing facilities in buried, underground, aerial and building work locations. Uses hand tools, power tools, and specialty tools, including specialty meters (e.g., multi-meters, volt-ohm meters, HST-3000, Sidekick), in inside and outside plant facilities. Performs testing and turn-up of subscriber lines. Locates and repairs aerial and underground cable. Locates, joins, repairs and rearranges cable and cable equipment in buildings and aerial or buried plant. Installs, maintains/repairs, and tests residential/small business telecommunication service (POTS, Prism, Fiber and DSL). Connects wires and cables to terminals, frames, and attaches/detaches various kinds of hardware to wires, cables, buildings, and poles. Performs continuity and/or conformance testing. Reads and interprets customer service orders, technical (i.e., mechanical, electrical, digital) drawings, maps, blueprints, diagrams, etc. Receives service orders, worksheets (detailed diagrams describing nature and location of equipment to be installed or repaired) and repair tickets from supervisor or other designated employees and performs specified work. Works with telecom color-coded wires and cables. Interacts with customers professionally and courteously via telephone or on the premises. Works well with others to achieve common goals and to foster a cooperative climate, as well as work independently in the field with little supervision. Summary Responsible for tasks assigned by the Company in connection with service order and repair activity on fiber network facilities between and including the customer-serving terminal and into the customer's premise, as well as installation activity at the fiber hub. These tasks may include, but not be limited to, installation and maintenance of voice, data and video equipment and/or service at the customer premise. In addition to providing revenue enhancing offers to the customer. Performs other duties as required.General DutiesDuties include, but are not limited to, the following: Installs, removes, rearranges, programs, tests, troubleshoots and maintains fiber network services. Installs and configures routers, set top boxes. Interacts with Advanced Technical Services as needed. May install appropriate inside wire/cable (such as Cat 5E, Coaxial cable).C. Installs maintains and repairs outside and inside fiber equipment/facilities including inside wiring and fiber jumpers at the distribution hub. Activates the ONT, STB and router at customer premise. Interfaces with customer to negotiate the placement of equipment. Trains the customer on how to use the new equipment. Ensures the customer is satisfied with the work that has been done. Responds to inquires and provides follow-up. Interprets schematic work order drawings to determine job specifications and installation needs. Orders and/or obtains required equipment. Effects problem solving where appropriate. Utilizes various test equipment to analyze equipment trouble and takes appropriate maintenance action. May be required to perform additional duties and tasks as required by the Company. Basic QualificationsA. Tests - Results obtained in standard tests for this position must meet minimum requirements established by the Company, in accordance with Company policy. Must meet ADEX/Frontier's standards of professionalism in communications and appearance. Must wear ADEX/Frontier branded attire. Wears appropriate safety apparel and is aware of and follows all established safety practices and procedures. Ability to identify and distinguish audible tones/levels and colors. Ability to work in confined areas. Ability to lift and carry tool boxes, drop wire, parts containers and installation loads, test equipment, etc. Ability to work aloft. In some areas, pole climbing may not be a requirement; for locations where pole climbing is required, a candidate must meet the course qualification standard. Ability to lift, carry, set-up, climb and take down ladders. Ability to communicate naturally and pleasantly over the telephone. Ability to professionally communicate extensively in person during in-home installation. Requires alertness and attention to detail. Ability to work under stress. A valid driver's license. Able to read and interpret architectural, electrical wiring diagrams. Able to operate applicable test equipment.P. Must be available to workas scheduled including weekends and holidays and for callouts and/or overtime as required. One year of experience in one or a combination of: Cable Splicer, Customer Engineer-Data Application, Customer Equipment Technician, Customer Zone Technician II, Customer Zone Technician I, Equipment Installer, Fiber Customer Support Analyst, Fiber Network Technician. EducationDegree in electronics technology from an accredited or recognized educational institution or equivalent experience

Job Description Job Description Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also driving positive impacts here on Earth. Lunar Outpost is seeking an Electronics and Harness Technician to support the build, assembly, integration, and testing of electrical hardware for lunar vehicles, robotics, and spacecraft systems. In this hands-on role, you will build and inspect wiring harnesses, assemble electronic hardware, perform soldering and rework, and support engineering teams with testing and troubleshooting. Your work will directly contribute to hardware destined for lunar missions and other advanced space technologies. Take the with Lunar Outpost and work on the Lunar Terrain Vehicle (LTV), which will carry NASA astronauts farther than they've ever been before on the lunar surface! Working Conditions / Schedule: This position is required to be onsite Monday, Tuesday, Thursday, and Friday from 9:00 a.m. to 5:00 p.m. Where applicable, employees may work remotely on Wednesdays from 9:00 a.m. to 5:00 p.m. Additional hours may be required based on business needs. Key Responsibilities: Perform hand soldering, rework, and repair of through-hole and surface-mount electronic components Fabricate, assemble, and inspect spacecraft and prototype wiring harnesses, cable assemblies, and electrical hardware Build and integrate electromechanical assemblies from engineering drawings, schematics, work instructions, and wiring diagrams Perform continuity, insulation resistance, and basic electrical verification testing Identify and document hardware nonconformances, workmanship issues, and assembly discrepancies Assist with inventory management, parts preparation, and hardware organization Maintain a clean, safe, and organized laboratory and production environment Support vehicle, subsystem, and prototype integration activities as required Required Qualifications: High school diploma, GED, technical certification, or equivalent experience 3-5 years of experience in electronics assembly, cable fabrication, soldering, or related technical work Demonstrated experience building and inspecting cable assemblies and wiring harnesses Proficiency in hand soldering and electronic rework techniques Ability to read engineering drawings, wiring diagrams, assembly instructions, and schematics Experience using standard electrical test equipment such as multimeters, power supplies, and oscilloscopes Familiarity with ESD controls and electronics handling best practices Strong attention to detail and commitment to quality workmanship Ability to work effectively in a fast-paced hardware development environment Strong communication and organizational skills U.S. Person Preferred Qualifications: IPC J-STD-001 Certified IPC Specialist (CIS) or equivalent solder workmanship certification IPC/WHMA-A-620 Certified IPC Specialist (CIS) or equivalent harness fabrication and inspection certification IPC-A-610 Certified IPC Specialist (CIS) or equivalent electronic assembly inspection certification Experience building aerospace, robotics, automotive, defense, or other high-reliability hardware Experience with aerospace-grade connectors, including Micro-D, D-Sub, circular, and other high-reliability interconnect systems Experience with environmental or vibration test preparation and support Ability to troubleshoot wiring, connector, and assembly issues Experience supporting prototype or low-volume manufacturing environments Compensation & Benefits: Compensation level and base salary are competitively structured and thoughtfully determined based on factors such as relevant skills, experience, education, and the scope of the role. Comprehensive health coverage: Medical, dental, and vision benefits, with 70% of premiums covered by the employer Paid time off: Three (3) weeks per year of vacation Retirement plan: Up to 4% employer match on 401(k) contributions Paid holidays: 11 company-recognized holidays Parental leave Educational reimbursement opportunities to support company objectives, continued learning, and career development Lunar Outpost Inc. is an equal opportunity employer. Lunar Outpost Inc. does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, ethnicity, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. All employees, including executives and human resources personnel, are expected to conduct themselves with professionalism and treat others with dignity and respect in accordance with this policy.

Job Description Job Description RF Design Technician Trans-Tech is the leading design and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, circulators and isolators, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors. Position Overview: The RF Design Technician is responsible for the development, design, and manufacturing support of microwave passive devices, with a focus on ceramic resonator-based filters. This role involves concept development, design documentation, prototype testing, and successful manufacturing introduction. The technician will provide technical leadership and support across various stages of product development and lifecycle management. Essential Job Functions: Technical Support: Provide training and technical support from concept through prototype to ensure smooth transition into volume manufacturing. Interface with manufacturing to resolve production and technical problems. Assist with Design and Development: Conceptualize, plan, design, develop, and analyze microwave filters for frequencies between Component Selection: Select electronic parts, components, or integrated circuitry based on specifications and reliability. Review vendor capabilities to support product development. Bench Design and Tuning: To build prototype filters on the bench tuned to meet design performance specifications. Precision Solder Techniques: Apply skills for solder/solder reflow of surface-mount devices (SMD) and apply visual acceptance criteria for inspection of finished products as defined in IPC-A-610 Competencies: Good soldering techniques and able to do solder rework using a microscope. Familiarity with ESD safety and prevention. Experience with RF Test and Measurement equipment, Network Analyzer, Spectrum Analyzer, Frequency Generators, Power Amplifiers, Oscilloscopes, DVM's, etc. Experience with multi-layer printed wiring boards (PWB) design and layout up to 40 GHz. Knowledge of metallization processes, including thick film processes. Ability to use diagnostic and microwave evaluation and test equipment. Strong analytical and design methodology skills. Proficiency with AutoCAD or SolidWorks and standard computer software packages (Microsoft Word and Excel). Qualifications: Education: High school diploma or equivalent plus formal military or commercial electronics training, or an associate degree in electronics technology with knowledge in radio frequency/microwave theory and technology. Experience: Experience in RF/microwave hardware development, with progressively increasing responsibility is a plus. Skills: Competent in RF measurements and design validation procedures with the ability to apply microwave theory in the design, testing, and troubleshooting of passive microwave devices is a plus. Ability to read/follow wiring schematics. Knowledge of the ANSYS simulation software a plus. Security: Must be a US Person. Benefits include: Medical, Dental, and Vision insurance Option to participate in 401(k) plan with safe harbor match Company-paid Life Insurance Paid time off Paid holidays Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.