Job Description Job Description Telecom Technician The The Lioce Group and Interconnect Systems (ISC) has been selling and servicing telephone systems, voice and data solutions in North Alabama since 1981. We've been providing exceptional office technology products and services for 42 years. Location: Interconnect Systems/ The Lioce Group in Huntsville, Alabama Employment Type: Full-Time Department: Technical Services Position Overview We are seeking a dependable, technically skilled Telecom Technician to join our growing team. This position is responsible for the installation, configuration, troubleshooting, repair, and maintenance of telecommunications, voice, network, and low-voltage systems at customer locations. The ideal candidate enjoys working independently, solving technical problems, interacting with customers, and taking ownership of a job from installation through completion. We are looking for someone who takes pride in quality workmanship and delivering an excellent customer experience. Key Responsibilities Install, configure, maintain, and troubleshoot business telecommunications systems. Install and service VoIP phones, phone systems, network equipment, and related communications hardware . Run, terminate, test, and troubleshoot Cat5e, Cat6, and other low-voltage cabling . Install and maintain network racks, patch panels, switches, routers, and related equipment. Diagnose voice, data, connectivity, call-quality, and equipment issues. Program and configure phones, extensions, voicemail, call routing, auto attendants, and other telecommunications features. Perform new system installations, equipment upgrades, moves, adds, and changes. Test completed installations to ensure proper system operation and reliability. Work with customers and internal support teams to resolve technical issues efficiently. Clearly explain system operation and basic troubleshooting procedures to customers. Maintain accurate service records, installation documentation, equipment information, and job notes. Properly maintain company tools, test equipment, inventory, and assigned vehicle. Follow company safety procedures and applicable low-voltage installation standards. Maintain clean, organized, and professional work areas at customer locations. Represent the company professionally while working at customer sites. Participate in manufacturer and company-provided technical training as needed. Qualifications Previous experience in telecommunications, low-voltage installation, structured cabling, networking, electronics, or a related technical field is preferred. Working knowledge of VoIP technology, IP networking, switches, routers, and structured cabling is strongly preferred. Ability to terminate and test Ethernet cabling. Strong mechanical and technical troubleshooting abilities. Basic understanding of TCP/IP networking, DHCP, VLANs, and network connectivity is a plus. Ability to read installation diagrams, wiring diagrams, and technical documentation. Strong attention to detail and commitment to quality workmanship. Excellent problem-solving and organizational skills. Professional communication and customer-service skills. Ability to work independently while also contributing to a team environment. Willingness and ability to learn new technologies and telecommunications platforms. Valid driver's license with an acceptable driving record. High school diploma or equivalent required; technical school, industry certifications, or related training are a plus. Physical Requirements This position requires working in a variety of commercial environments and may include: Lifting and carrying equipment weighing up to approximately 50 pounds. Standing, walking, bending, kneeling, and climbing throughout the workday. Working from ladders when necessary. Running cable above ceilings and through telecommunications spaces. Using hand tools, power tools, cable testers, and other installation equipment. Occasionally working in tight or confined areas associated with telecommunications and network installations. What We're Looking For Beyond technical experience, we want someone who: Takes ownership of problems and sees them through to completion. Shows up on time and can be counted on. Takes pride in doing a job correctly rather than simply getting it finished. Can troubleshoot logically instead of relying solely on instructions. Communicates well with customers and coworkers. Maintains a professional appearance and attitude. Is comfortable working independently in the field. Wants to continue learning as telecom and network technologies evolve.
11/17/2026
Full time
Job Description Job Description Telecom Technician The The Lioce Group and Interconnect Systems (ISC) has been selling and servicing telephone systems, voice and data solutions in North Alabama since 1981. We've been providing exceptional office technology products and services for 42 years. Location: Interconnect Systems/ The Lioce Group in Huntsville, Alabama Employment Type: Full-Time Department: Technical Services Position Overview We are seeking a dependable, technically skilled Telecom Technician to join our growing team. This position is responsible for the installation, configuration, troubleshooting, repair, and maintenance of telecommunications, voice, network, and low-voltage systems at customer locations. The ideal candidate enjoys working independently, solving technical problems, interacting with customers, and taking ownership of a job from installation through completion. We are looking for someone who takes pride in quality workmanship and delivering an excellent customer experience. Key Responsibilities Install, configure, maintain, and troubleshoot business telecommunications systems. Install and service VoIP phones, phone systems, network equipment, and related communications hardware . Run, terminate, test, and troubleshoot Cat5e, Cat6, and other low-voltage cabling . Install and maintain network racks, patch panels, switches, routers, and related equipment. Diagnose voice, data, connectivity, call-quality, and equipment issues. Program and configure phones, extensions, voicemail, call routing, auto attendants, and other telecommunications features. Perform new system installations, equipment upgrades, moves, adds, and changes. Test completed installations to ensure proper system operation and reliability. Work with customers and internal support teams to resolve technical issues efficiently. Clearly explain system operation and basic troubleshooting procedures to customers. Maintain accurate service records, installation documentation, equipment information, and job notes. Properly maintain company tools, test equipment, inventory, and assigned vehicle. Follow company safety procedures and applicable low-voltage installation standards. Maintain clean, organized, and professional work areas at customer locations. Represent the company professionally while working at customer sites. Participate in manufacturer and company-provided technical training as needed. Qualifications Previous experience in telecommunications, low-voltage installation, structured cabling, networking, electronics, or a related technical field is preferred. Working knowledge of VoIP technology, IP networking, switches, routers, and structured cabling is strongly preferred. Ability to terminate and test Ethernet cabling. Strong mechanical and technical troubleshooting abilities. Basic understanding of TCP/IP networking, DHCP, VLANs, and network connectivity is a plus. Ability to read installation diagrams, wiring diagrams, and technical documentation. Strong attention to detail and commitment to quality workmanship. Excellent problem-solving and organizational skills. Professional communication and customer-service skills. Ability to work independently while also contributing to a team environment. Willingness and ability to learn new technologies and telecommunications platforms. Valid driver's license with an acceptable driving record. High school diploma or equivalent required; technical school, industry certifications, or related training are a plus. Physical Requirements This position requires working in a variety of commercial environments and may include: Lifting and carrying equipment weighing up to approximately 50 pounds. Standing, walking, bending, kneeling, and climbing throughout the workday. Working from ladders when necessary. Running cable above ceilings and through telecommunications spaces. Using hand tools, power tools, cable testers, and other installation equipment. Occasionally working in tight or confined areas associated with telecommunications and network installations. What We're Looking For Beyond technical experience, we want someone who: Takes ownership of problems and sees them through to completion. Shows up on time and can be counted on. Takes pride in doing a job correctly rather than simply getting it finished. Can troubleshoot logically instead of relying solely on instructions. Communicates well with customers and coworkers. Maintains a professional appearance and attitude. Is comfortable working independently in the field. Wants to continue learning as telecom and network technologies evolve.
Job Description Job Description This position requires a technician who is equally comfortable troubleshooting business networks, installing structured cabling, operating power tools, and safely working from scissor lifts or boom lifts. The successful candidate must be capable of completing field service assignments and installations independently, with minimal supervision. This is NOT an entry-level position. All mandatory experience and certification requirements must be met. Key Responsibilities IT & Network Support Troubleshoot and resolve business IT hardware, software, and network issues. Install, configure, and troubleshoot routers, managed switches, firewalls, and wireless access points. Diagnose TCP/IP, DNS, DHCP, VLAN, VPN, and LAN/WAN connectivity issues. Support Windows computers, Microsoft 365, printers, and network-connected devices. Perform network equipment upgrades, replacements, and system deployments. Independently respond to field service requests and document completed work. Structured Cabling & Infrastructure Install, route, terminate, label, and test Cat5e, Cat6, and Cat6A network cabling. Install network racks, cabinets, patch panels, cable trays, J-hooks, and cable management systems. Install and secure conduit, cable supports, and low-voltage mounting hardware. Perform overhead cable installations in commercial buildings, warehouses, and industrial facilities. Use cable testers and certification equipment to identify and resolve cabling issues. Read and interpret construction drawings, cable schedules, and network diagrams. Maintain professional cable routing, labeling, and installation standards. Power Tools & Elevated Work Safely and proficiently operate commercial power tools, including hammer drills, rotary hammer drills, impact drivers, reciprocating saws, and other installation equipment. Drill and install anchors, mounting brackets, cable supports, and equipment hardware. Safely operate scissor lifts and boom lifts for elevated installation work within the operator's documented qualifications. Perform overhead installation activities, including mounting wireless access points, security cameras, cable pathways, and network infrastructure. Follow jobsite safety requirements, fall protection procedures, and equipment operating guidelines. Inspect tools and lift equipment before use and identify unsafe conditions. Security & Low-Voltage Systems Install and troubleshoot IP security cameras, NVRs, and PoE devices. Assist with access control hardware and controller installations. Install and troubleshoot low-voltage equipment and associated cabling. Support commercial technology installations and infrastructure upgrades. Mandatory Qualifications - ALL REQUIRED Minimum 5 years of verifiable professional field experience in commercial IT support, networking, or low-voltage infrastructure. Active CompTIA Network+ certification. Current aerial lift operator training/certification appropriate for the scissor lifts and/or boom lifts used on assigned projects. Proven hands-on experience operating commercial power tools , including drills, rotary hammers, impact drivers, and cutting equipment. Professional structured cabling installation experience , including Cat6 termination, patch panel installation, cable routing, labeling, and testing. Experience installing network racks, cable pathways, mounting hardware, and overhead infrastructure. Ability to safely perform elevated work using ladders and aerial lifts. Strong understanding of TCP/IP networking, switches, routers, VLANs, DNS, DHCP, and wireless networking. Ability to independently diagnose and resolve IT and network issues. Experience supporting Windows environments and Microsoft 365. Ability to read technical drawings and follow installation specifications. Valid driver's license and reliable transportation. Ability to lift up to 50 pounds and perform physical field installation work, with or without reasonable accommodation. Strong troubleshooting, communication, documentation, and customer service skills. Applicants who lack the required field experience, certifications, power tool proficiency, or structured cabling background will not be considered. Preferred Qualifications Ubiquiti UniFi, Cisco, Fortinet, or SonicWall experience. Fiber optic installation, termination, and testing experience. IP surveillance and access control installation experience. Structured Cabling Experience CompTIA Security+ or Cisco CCNA certification. Experience working on active commercial construction sites. What We Expect The ideal technician can arrive at a jobsite, review the assigned scope of work, select the appropriate tools, safely complete installations, troubleshoot technical problems, and deliver professional results without constant supervision. We value technical competence, reliability, accountability, safety awareness, and quality workmanship. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team.
11/17/2026
Full time
Job Description Job Description This position requires a technician who is equally comfortable troubleshooting business networks, installing structured cabling, operating power tools, and safely working from scissor lifts or boom lifts. The successful candidate must be capable of completing field service assignments and installations independently, with minimal supervision. This is NOT an entry-level position. All mandatory experience and certification requirements must be met. Key Responsibilities IT & Network Support Troubleshoot and resolve business IT hardware, software, and network issues. Install, configure, and troubleshoot routers, managed switches, firewalls, and wireless access points. Diagnose TCP/IP, DNS, DHCP, VLAN, VPN, and LAN/WAN connectivity issues. Support Windows computers, Microsoft 365, printers, and network-connected devices. Perform network equipment upgrades, replacements, and system deployments. Independently respond to field service requests and document completed work. Structured Cabling & Infrastructure Install, route, terminate, label, and test Cat5e, Cat6, and Cat6A network cabling. Install network racks, cabinets, patch panels, cable trays, J-hooks, and cable management systems. Install and secure conduit, cable supports, and low-voltage mounting hardware. Perform overhead cable installations in commercial buildings, warehouses, and industrial facilities. Use cable testers and certification equipment to identify and resolve cabling issues. Read and interpret construction drawings, cable schedules, and network diagrams. Maintain professional cable routing, labeling, and installation standards. Power Tools & Elevated Work Safely and proficiently operate commercial power tools, including hammer drills, rotary hammer drills, impact drivers, reciprocating saws, and other installation equipment. Drill and install anchors, mounting brackets, cable supports, and equipment hardware. Safely operate scissor lifts and boom lifts for elevated installation work within the operator's documented qualifications. Perform overhead installation activities, including mounting wireless access points, security cameras, cable pathways, and network infrastructure. Follow jobsite safety requirements, fall protection procedures, and equipment operating guidelines. Inspect tools and lift equipment before use and identify unsafe conditions. Security & Low-Voltage Systems Install and troubleshoot IP security cameras, NVRs, and PoE devices. Assist with access control hardware and controller installations. Install and troubleshoot low-voltage equipment and associated cabling. Support commercial technology installations and infrastructure upgrades. Mandatory Qualifications - ALL REQUIRED Minimum 5 years of verifiable professional field experience in commercial IT support, networking, or low-voltage infrastructure. Active CompTIA Network+ certification. Current aerial lift operator training/certification appropriate for the scissor lifts and/or boom lifts used on assigned projects. Proven hands-on experience operating commercial power tools , including drills, rotary hammers, impact drivers, and cutting equipment. Professional structured cabling installation experience , including Cat6 termination, patch panel installation, cable routing, labeling, and testing. Experience installing network racks, cable pathways, mounting hardware, and overhead infrastructure. Ability to safely perform elevated work using ladders and aerial lifts. Strong understanding of TCP/IP networking, switches, routers, VLANs, DNS, DHCP, and wireless networking. Ability to independently diagnose and resolve IT and network issues. Experience supporting Windows environments and Microsoft 365. Ability to read technical drawings and follow installation specifications. Valid driver's license and reliable transportation. Ability to lift up to 50 pounds and perform physical field installation work, with or without reasonable accommodation. Strong troubleshooting, communication, documentation, and customer service skills. Applicants who lack the required field experience, certifications, power tool proficiency, or structured cabling background will not be considered. Preferred Qualifications Ubiquiti UniFi, Cisco, Fortinet, or SonicWall experience. Fiber optic installation, termination, and testing experience. IP surveillance and access control installation experience. Structured Cabling Experience CompTIA Security+ or Cisco CCNA certification. Experience working on active commercial construction sites. What We Expect The ideal technician can arrive at a jobsite, review the assigned scope of work, select the appropriate tools, safely complete installations, troubleshoot technical problems, and deliver professional results without constant supervision. We value technical competence, reliability, accountability, safety awareness, and quality workmanship. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team.
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description At CompucomStaffing, you're more than just a number. Our employee relationship managers support you throughout your engagement, providing career guidance and reemployment assistance. Our client is currently seeking a qualified Level 4 Technician to join their team onsite in Chandler, AZ and provide end-user support. This role will work Monday to Friday, 8AM to 5PM. Duties and Responsibilities: Performing installation and service of low voltage category cabling, fiber optic cabling, communications cabling, communication equipment and other various low voltage related systems such as Category 5, Enhanced Category 5, Category 6 and 7, and Fiber Optic cabling Assisting with material control to ensure all required materials are available to complete the daily work Ensuring quality and safety guidelines are followed Ensuring ticketed requests are assigned, communicated, and addressed within client SLA Performing quality evaluation, diagnosing, troubleshooting of cabling systems, and performing replacement / repairs as necessary Assisting data center teams and data center managers in accomplishing daily infrastructure new landings within SLA Proven ability to install cable pathways, conveyances (i.e., ladder, trays, support systems) Knowledge of terminology pertaining to installation and service of cabling infrastructure for telecom, data, security, and wireless systems Mechanical aptitude with the ability to read cable matrix blueprints, mechanical, and or electrical requirement documents Able to complete physical cables installations and removal of cabling components, TOR (top of rack) switches, pathway systems (cable tray), move equipment, network gear and related communications infrastructure hardware and materials Structured Network Cabling experience Copper: Cat5, Cat5e, Cat6, Connector Types RJ45 Fiber: Multimode, Single Mode, Connector Types - ST, SC, LC WIFI hardware experience Wireless LAN Controllers Wireless Access Points Networking experience IP Addressing, Layer 2 VLAN etc Experienced in Ethernet Switching hardware Chassis, Supervisor, Line Cards, Power Supplies etc Transceiver Types - SX, LX, SR, LR etc Cable Troubleshooting Knowledge / Experience Fluke Testers: Copper - Wire Map, Link Test etc, Fiber - OTDR Testing Fluke Aircheck: Wireless Testing Ability to withstand working in a hot enclosed environment for short time spans required (i.e., data center hot isles) Must be able to perform work while on a ladder (use of ladders is required for top of rack installations) Must be able to lift 35 lbs. solo May be required to walk / sit / stand / crawl / kneel for extended periods Must have excellent customer service skills and written / verbal communication skills Experience with Windows 10/11 and Windows Server 2019/2022 OS installation and troubleshooting Knowledge of computer diagnostics and installation, to include hardware/software troubleshooting and networking Demonstrated experience installing server systems and related components such as networking and storage equipment Familiarity with the operation and configuration of networking protocols, network card installation, switches, routers and similar components Ability to work in a fast-paced environment and offer effective solutions under tight deadlines Strong problem-solving and root cause analysis skills Must be capable of lifting 1U and 2U rack mounted servers up to 35 pounds and familiar with the use of pallet jacks, lifts, and general data center safety procedures Rack new servers and un-rack/remove old servers Cable install & De-install / good wire management required Maintain a safe work environment with strict inventory control processes Cleanroom experience (a recommended plus) Intermediate experience with Windows 2016/2022 installation and configuration including: Features need to know roles Disk Management User Administration OS troubleshooting to identify build issues Adding SAN drives/MPIO Network Management Intermediate experience with server hardware Client DL360/380 Gen8, Gen9, Gen10, and BL460 Gen8, Gen9, Gen10 Experience troubleshooting memory, disk, array controller battery, HBA, FlexLOM issues Raid configuration/ logical drives iLO configuration Servers and C7000 enclosures Onboard Administrator Vsphere 6.5/7.0 vcenter experience Microsoft failover cluster knowledge and installation experience Microsoft NLB cluster knowledge and installation experience Skills and Qualifications: Associate or bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Minimum 4+ years of combined experience in a site support technician and / or infrastructure technician role (or similar experience) Data Center experience required Minimum 3+ years of experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices required Minimum 3+ years of combined experience working in data centers, labs, or server room environments required Maintaining network environment as part of onsite team in support of physical touch (Smart Hands) support of Incident and or Requests Providing incident support by working with remote level 2 / 3 teams to assist in resolving outages and fixing issues including replacement of cabling or hardware components Providing service request support and working with remote network support teams to install hardware or patch cables to enable new services for customers Participating in hardware rack and stack installation of both network and server equipment, cable management, and installation of required fiber and copper patch leads, providing console access to remote team for configuration if required and testing connectivity after installation and configuration Data Center Maintenance: Proactive walkthrough for failed hardware Physical audit of supported systems Proper disposal of hardware and media following client guidelines Manage incident & request tickets assigned to queue Validate server(s) / task Contact client for information / request downtime etc. Diagnose problem, remotely if possible / on site if required - order parts as required Repair / replace / configure as required within scope Complete paperwork Landings: Validate server(s) landing requirements Contact client as required for information Physical land of hardware in correct location Build to proper configuration according to client requirements and cut sheet Request tasks from required groups for additional services Monitor tasks for completion or problems and escalate to appropriate parties to resolve Update asset tracking system with server name, location, and owner Decoms: Validate server Inform client of decom Request decom tasks from required groups to remove server(s) from their services Validate that dependent services have been halted Power off and remove server(s) Dispose of hardware as requested by owner BackUp / BAR Support: Escalate unresolved issues to Tier 2 or 3 specialist or client BaR contacts Coordinate tasks with other client techs Physical installation of backup hardware Install operating system on backup server hardware Maintain client required training Media Management: Eject tapes from tape libraries in accordance with disaster recovery targets Prepare and ship tapes to offsite storage vendor Receive tapes from offsite storage vendor Load tape libraries with tapes for Scratch Pool; new, returned expired, recalled for on-demand restores Perform post-tape load processes on tape libraries Recall tapes from offsite storage vendor Manage on-site surplus tape inventory Manage the tape lifecycle using backup and library software, and any third-party tools Dispose of damaged or EOL tapes in accordance with client information security policies Monitor and respond to media errors and tape alerts from backup software and tape libraries Wage Range: The rate for this position is between $23.14 - $30.85 per hour, unless local minimum wage is higher. Factors which may affect starting pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate. Benefits: The Company offers a comprehensive benefit package that you can elect into including but not limited to the following benefits, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, life insurance, AD&D insurance, disability plans, Employee Assistance Program, paid holidays (up to 6 days annually), paid time off (minimum of 10 days annually), paid parental leave (minimum of 10 days annually), 401(k), FSA/HSA pre-tax benefits. . click apply for full job details
11/17/2026
Full time
Job Description Job Description At CompucomStaffing, you're more than just a number. Our employee relationship managers support you throughout your engagement, providing career guidance and reemployment assistance. Our client is currently seeking a qualified Level 4 Technician to join their team onsite in Chandler, AZ and provide end-user support. This role will work Monday to Friday, 8AM to 5PM. Duties and Responsibilities: Performing installation and service of low voltage category cabling, fiber optic cabling, communications cabling, communication equipment and other various low voltage related systems such as Category 5, Enhanced Category 5, Category 6 and 7, and Fiber Optic cabling Assisting with material control to ensure all required materials are available to complete the daily work Ensuring quality and safety guidelines are followed Ensuring ticketed requests are assigned, communicated, and addressed within client SLA Performing quality evaluation, diagnosing, troubleshooting of cabling systems, and performing replacement / repairs as necessary Assisting data center teams and data center managers in accomplishing daily infrastructure new landings within SLA Proven ability to install cable pathways, conveyances (i.e., ladder, trays, support systems) Knowledge of terminology pertaining to installation and service of cabling infrastructure for telecom, data, security, and wireless systems Mechanical aptitude with the ability to read cable matrix blueprints, mechanical, and or electrical requirement documents Able to complete physical cables installations and removal of cabling components, TOR (top of rack) switches, pathway systems (cable tray), move equipment, network gear and related communications infrastructure hardware and materials Structured Network Cabling experience Copper: Cat5, Cat5e, Cat6, Connector Types RJ45 Fiber: Multimode, Single Mode, Connector Types - ST, SC, LC WIFI hardware experience Wireless LAN Controllers Wireless Access Points Networking experience IP Addressing, Layer 2 VLAN etc Experienced in Ethernet Switching hardware Chassis, Supervisor, Line Cards, Power Supplies etc Transceiver Types - SX, LX, SR, LR etc Cable Troubleshooting Knowledge / Experience Fluke Testers: Copper - Wire Map, Link Test etc, Fiber - OTDR Testing Fluke Aircheck: Wireless Testing Ability to withstand working in a hot enclosed environment for short time spans required (i.e., data center hot isles) Must be able to perform work while on a ladder (use of ladders is required for top of rack installations) Must be able to lift 35 lbs. solo May be required to walk / sit / stand / crawl / kneel for extended periods Must have excellent customer service skills and written / verbal communication skills Experience with Windows 10/11 and Windows Server 2019/2022 OS installation and troubleshooting Knowledge of computer diagnostics and installation, to include hardware/software troubleshooting and networking Demonstrated experience installing server systems and related components such as networking and storage equipment Familiarity with the operation and configuration of networking protocols, network card installation, switches, routers and similar components Ability to work in a fast-paced environment and offer effective solutions under tight deadlines Strong problem-solving and root cause analysis skills Must be capable of lifting 1U and 2U rack mounted servers up to 35 pounds and familiar with the use of pallet jacks, lifts, and general data center safety procedures Rack new servers and un-rack/remove old servers Cable install & De-install / good wire management required Maintain a safe work environment with strict inventory control processes Cleanroom experience (a recommended plus) Intermediate experience with Windows 2016/2022 installation and configuration including: Features need to know roles Disk Management User Administration OS troubleshooting to identify build issues Adding SAN drives/MPIO Network Management Intermediate experience with server hardware Client DL360/380 Gen8, Gen9, Gen10, and BL460 Gen8, Gen9, Gen10 Experience troubleshooting memory, disk, array controller battery, HBA, FlexLOM issues Raid configuration/ logical drives iLO configuration Servers and C7000 enclosures Onboard Administrator Vsphere 6.5/7.0 vcenter experience Microsoft failover cluster knowledge and installation experience Microsoft NLB cluster knowledge and installation experience Skills and Qualifications: Associate or bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education Minimum 4+ years of combined experience in a site support technician and / or infrastructure technician role (or similar experience) Data Center experience required Minimum 3+ years of experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices required Minimum 3+ years of combined experience working in data centers, labs, or server room environments required Maintaining network environment as part of onsite team in support of physical touch (Smart Hands) support of Incident and or Requests Providing incident support by working with remote level 2 / 3 teams to assist in resolving outages and fixing issues including replacement of cabling or hardware components Providing service request support and working with remote network support teams to install hardware or patch cables to enable new services for customers Participating in hardware rack and stack installation of both network and server equipment, cable management, and installation of required fiber and copper patch leads, providing console access to remote team for configuration if required and testing connectivity after installation and configuration Data Center Maintenance: Proactive walkthrough for failed hardware Physical audit of supported systems Proper disposal of hardware and media following client guidelines Manage incident & request tickets assigned to queue Validate server(s) / task Contact client for information / request downtime etc. Diagnose problem, remotely if possible / on site if required - order parts as required Repair / replace / configure as required within scope Complete paperwork Landings: Validate server(s) landing requirements Contact client as required for information Physical land of hardware in correct location Build to proper configuration according to client requirements and cut sheet Request tasks from required groups for additional services Monitor tasks for completion or problems and escalate to appropriate parties to resolve Update asset tracking system with server name, location, and owner Decoms: Validate server Inform client of decom Request decom tasks from required groups to remove server(s) from their services Validate that dependent services have been halted Power off and remove server(s) Dispose of hardware as requested by owner BackUp / BAR Support: Escalate unresolved issues to Tier 2 or 3 specialist or client BaR contacts Coordinate tasks with other client techs Physical installation of backup hardware Install operating system on backup server hardware Maintain client required training Media Management: Eject tapes from tape libraries in accordance with disaster recovery targets Prepare and ship tapes to offsite storage vendor Receive tapes from offsite storage vendor Load tape libraries with tapes for Scratch Pool; new, returned expired, recalled for on-demand restores Perform post-tape load processes on tape libraries Recall tapes from offsite storage vendor Manage on-site surplus tape inventory Manage the tape lifecycle using backup and library software, and any third-party tools Dispose of damaged or EOL tapes in accordance with client information security policies Monitor and respond to media errors and tape alerts from backup software and tape libraries Wage Range: The rate for this position is between $23.14 - $30.85 per hour, unless local minimum wage is higher. Factors which may affect starting pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate. Benefits: The Company offers a comprehensive benefit package that you can elect into including but not limited to the following benefits, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, life insurance, AD&D insurance, disability plans, Employee Assistance Program, paid holidays (up to 6 days annually), paid time off (minimum of 10 days annually), paid parental leave (minimum of 10 days annually), 401(k), FSA/HSA pre-tax benefits. . click apply for full job details
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
11/17/2026
Full time
Job Description Job Description On-Call IT Field Technician - PC, Mac, POS and TV Mounting Location: Multiple U.S. Cities (Local, Onsite Support) Job Type: Independent Contractor (1099) Pay: $35 per hour (on-site) Schedule: Flexible - You accept jobs based on your availability Important Note This is an on-call, 1099 independent contractor role with full flexibility and no guaranteed hours. You set your availability and driving radius, and we send jobs that match your proximity and skills. About the Role Geeks On Site provides nationwide computer repair and technology support services for homes and businesses, delivered both remotely and on-site. Our services include computer repair, IT support, smart home installation, and a broad range of in-home and business technology services offering fast, reliable solutions across a wide range of devices and systems. Geeks On Site is hiring experienced Field IT Technicians to support residential and small business customers. The primary focus is computer troubleshooting, networking support, printer configuration, and general on site IT service. Technicians may also receive POS or outdoor TV mounting jobs based on experience. Responsibilities Troubleshoot and repair Windows and macOS issues Resolve WiFi, router, and wired network problems Install and configure printers and scanners Replace or upgrade hardware components Reinstall operating systems using bootable tools Document work and communicate clearly with customers Install and support POS systems and run Cat5e or Cat6 cabling Perform outdoor TV mounting and basic AV setup Requirements Two or more years of experience in IT support or field service Strong networking and diagnostic skills Reliable transportation and valid driver's license Ability to work independently and provide professional customer service Ability to lift up to 50 lbs Own required tools including a laptop, drill, screwdrivers, cable tester, and RJ45 tools Benefits IT and POS work: $35 per hour for time on site Outdoor TV mounting: starts at $100 per mounted device, varies if a helper is required Flexible scheduling - accept only the jobs that match your route and availability National brand recognition and continuous job offers Dispatch and tech support team available to assist remotely What to Expect After You Apply Intro Call - A recruiter will contact you for a quick chat Onboarding - Complete paperwork and tax forms electronically Background Check - Mandatory before activation Set Your Availability - You enter your availability in our tech portal Start Receiving Jobs - You'll be dispatched jobs based on proximity & skills
Agil3 Technology Solutions (A3T)
Quantico, Virginia
Job Description Job Description Agil3 Technology Solutions (A3T) is seeking an experienced Cable / Network Infrastructure Technician to provide installation, maintenance, troubleshooting, repair, and documentation support for the physical network infrastructure supporting the U.S. Government. The Technician will support copper and fiber cabling, network closets, patch panels, equipment racks, network devices, and associated infrastructure. The position will work closely with Network Engineers, Systems Administrators, and Technical Support personnel to maintain reliable network connectivity across the customer's facilities. Key Responsibilities Install, terminate, test, label, troubleshoot, repair, and maintain copper and fiber-optic network cabling. Support structured cabling systems, including horizontal and backbone cabling, patch panels, equipment racks, telecommunications rooms, and network closets. Install and maintain network drops, wall jacks, patch cables, and associated connectivity components. Perform cable tracing, testing, certification, and fault isolation using appropriate equipment. Diagnose and resolve physical-layer network connectivity problems. Assist Network Engineers with troubleshooting LAN/WAN connectivity and network infrastructure issues. Install, relocate, connect, disconnect, and replace network equipment and associated cabling. Support installation and replacement of switches, wireless access points, racks, patch panels, and other network infrastructure under appropriate technical direction. Perform Moves, Adds, and Changes (MACs) involving network and telecommunications infrastructure. Maintain proper cable routing, dressing, labeling, bundling, and physical organization within telecommunications rooms and equipment racks. Support fiber-optic connectivity, including installation, patching, testing, troubleshooting, and documentation. Inspect network closets and telecommunications spaces and identify damaged, improperly installed, unlabeled, or obsolete infrastructure. Assist with network infrastructure modernization and technology-refresh projects. Support removal and replacement of End-of-Life (EOL) and End-of-Support (EOS) infrastructure. Assist with equipment Return Material Authorization (RMA) and replacement activities as required. Maintain accurate cable records, port assignments, network closet documentation, diagrams, labeling, and infrastructure inventories. Update drawings and documentation to reflect network infrastructure changes. Coordinate infrastructure work with Network Engineers, Systems Administrators, facilities personnel, and other technical teams. Create, update, and document infrastructure-related service requests and trouble tickets. Follow applicable installation, safety, physical-security, and cybersecurity requirements while performing work. Provide on-site infrastructure support for outages, projects, equipment installations, and other mission requirements. Minimum Experience: Must have 3-5+ years of structured cabling, network infrastructure, telecommunications, or related technical experience. Must have an active DoD Secret security clearance. Must satisfy applicable DoD 8140/DCWF requirements for Work Role 442 at the Advanced proficiency level (Security+ or higher). Experience installing and maintaining copper and fiber-optic cabling. Experience terminating, testing, labeling, and troubleshooting network cabling. Experience working with patch panels, equipment racks, network closets, wall jacks, and related telecommunications infrastructure. Experience using cable testers, tone generators/probes, fiber-testing equipment, and related diagnostic tools. Working knowledge of Ethernet and physical network infrastructure. Ability to read and maintain network diagrams, cable schedules, floor plans, and technical documentation. Basic understanding of network switches, wireless access points, VLANs, and LAN connectivity sufficient to support physical-layer troubleshooting. Experience documenting infrastructure installations and changes. Ability to safely lift, install, move, and position network equipment and associated hardware. Strong troubleshooting, organizational, documentation, and customer-service skills. Ability to work independently while coordinating with Network Engineering personnel. Preferred Qualifications: Associate degree or technical/vocational training in Information Technology, Telecommunications, Electronics, Networking, or related discipline. BICSI Installer or Technician certification. BICSI Registered Communications Distribution Designer (RCDD) exposure or experience working from RCDD-developed designs. CompTIA Network+ or Fiber-optic installation or technician certification. Experience with CAT5e, CAT6/CAT6A, multimode and single-mode fiber infrastructure. Experience supporting Cisco network environments. Familiarity with TIA/EIA structured-cabling standards. Experience supporting data centers, telecommunications rooms, and network closets. Experience with network cable-management and documentation systems. Previous USMC, Navy, or other DoD network infrastructure experience. Compensation A3T is committed to offering competitive compensation based on individual qualifications and business needs. The salary range posted for this position represents a reasonable estimate of the expected pay range; however, actual compensation may vary depending on factors such as geographic location, education, certifications, technical skills, relevant experience, knowledge, and overall qualifications. The posted range is intended to reflect the typical salary range for this role within A3T. Target Salary for this Role: $55,000 - $70,000 Company Overview Agil3 Technology Solutions LLC ("A3T") is a Northern Virginia based, ISO 9001, ISO 20000-1 & ISO 27001 Certified, Women-Owned (WOSB) and Service-disabled Veteran-Owned (SDVOSB) small business. A recent recipient of the prestigious Washington Technology TOP 50 (ranking , and on the list for last 4 years!), A3T is experiencing industry leading recognition and growth. In addition to the CEO's recognition as an "All-Star Entrepreneur", A3T is recognized by Inc Magazine as one of the fastest growing companies in the country, by Vet 50 as Fastest Growing Veteran-Owned Businesses, and is featured in CyberSecurity Ventures / Cybercrime Magazine! "As a go-to Women-Owned Cybersecurity company in US and internationally". As part of our growth, we are looking for YOU to join our growing team. A3T offers excellent benefits to enhance the work-life balance, including: Medical Insurance Dental Insurance Vision Insurance Life Insurance Short Term & Long-Term Disability 401k Retirement Savings Plan with Company Match Paid Holidays Paid Time Off (PTO) Tuition and Professional Development Assistance Parking/Travel Reimbursement (metropolitan areas) Powered by JazzHR EHtDJZuWrC
11/16/2026
Full time
Job Description Job Description Agil3 Technology Solutions (A3T) is seeking an experienced Cable / Network Infrastructure Technician to provide installation, maintenance, troubleshooting, repair, and documentation support for the physical network infrastructure supporting the U.S. Government. The Technician will support copper and fiber cabling, network closets, patch panels, equipment racks, network devices, and associated infrastructure. The position will work closely with Network Engineers, Systems Administrators, and Technical Support personnel to maintain reliable network connectivity across the customer's facilities. Key Responsibilities Install, terminate, test, label, troubleshoot, repair, and maintain copper and fiber-optic network cabling. Support structured cabling systems, including horizontal and backbone cabling, patch panels, equipment racks, telecommunications rooms, and network closets. Install and maintain network drops, wall jacks, patch cables, and associated connectivity components. Perform cable tracing, testing, certification, and fault isolation using appropriate equipment. Diagnose and resolve physical-layer network connectivity problems. Assist Network Engineers with troubleshooting LAN/WAN connectivity and network infrastructure issues. Install, relocate, connect, disconnect, and replace network equipment and associated cabling. Support installation and replacement of switches, wireless access points, racks, patch panels, and other network infrastructure under appropriate technical direction. Perform Moves, Adds, and Changes (MACs) involving network and telecommunications infrastructure. Maintain proper cable routing, dressing, labeling, bundling, and physical organization within telecommunications rooms and equipment racks. Support fiber-optic connectivity, including installation, patching, testing, troubleshooting, and documentation. Inspect network closets and telecommunications spaces and identify damaged, improperly installed, unlabeled, or obsolete infrastructure. Assist with network infrastructure modernization and technology-refresh projects. Support removal and replacement of End-of-Life (EOL) and End-of-Support (EOS) infrastructure. Assist with equipment Return Material Authorization (RMA) and replacement activities as required. Maintain accurate cable records, port assignments, network closet documentation, diagrams, labeling, and infrastructure inventories. Update drawings and documentation to reflect network infrastructure changes. Coordinate infrastructure work with Network Engineers, Systems Administrators, facilities personnel, and other technical teams. Create, update, and document infrastructure-related service requests and trouble tickets. Follow applicable installation, safety, physical-security, and cybersecurity requirements while performing work. Provide on-site infrastructure support for outages, projects, equipment installations, and other mission requirements. Minimum Experience: Must have 3-5+ years of structured cabling, network infrastructure, telecommunications, or related technical experience. Must have an active DoD Secret security clearance. Must satisfy applicable DoD 8140/DCWF requirements for Work Role 442 at the Advanced proficiency level (Security+ or higher). Experience installing and maintaining copper and fiber-optic cabling. Experience terminating, testing, labeling, and troubleshooting network cabling. Experience working with patch panels, equipment racks, network closets, wall jacks, and related telecommunications infrastructure. Experience using cable testers, tone generators/probes, fiber-testing equipment, and related diagnostic tools. Working knowledge of Ethernet and physical network infrastructure. Ability to read and maintain network diagrams, cable schedules, floor plans, and technical documentation. Basic understanding of network switches, wireless access points, VLANs, and LAN connectivity sufficient to support physical-layer troubleshooting. Experience documenting infrastructure installations and changes. Ability to safely lift, install, move, and position network equipment and associated hardware. Strong troubleshooting, organizational, documentation, and customer-service skills. Ability to work independently while coordinating with Network Engineering personnel. Preferred Qualifications: Associate degree or technical/vocational training in Information Technology, Telecommunications, Electronics, Networking, or related discipline. BICSI Installer or Technician certification. BICSI Registered Communications Distribution Designer (RCDD) exposure or experience working from RCDD-developed designs. CompTIA Network+ or Fiber-optic installation or technician certification. Experience with CAT5e, CAT6/CAT6A, multimode and single-mode fiber infrastructure. Experience supporting Cisco network environments. Familiarity with TIA/EIA structured-cabling standards. Experience supporting data centers, telecommunications rooms, and network closets. Experience with network cable-management and documentation systems. Previous USMC, Navy, or other DoD network infrastructure experience. Compensation A3T is committed to offering competitive compensation based on individual qualifications and business needs. The salary range posted for this position represents a reasonable estimate of the expected pay range; however, actual compensation may vary depending on factors such as geographic location, education, certifications, technical skills, relevant experience, knowledge, and overall qualifications. The posted range is intended to reflect the typical salary range for this role within A3T. Target Salary for this Role: $55,000 - $70,000 Company Overview Agil3 Technology Solutions LLC ("A3T") is a Northern Virginia based, ISO 9001, ISO 20000-1 & ISO 27001 Certified, Women-Owned (WOSB) and Service-disabled Veteran-Owned (SDVOSB) small business. A recent recipient of the prestigious Washington Technology TOP 50 (ranking , and on the list for last 4 years!), A3T is experiencing industry leading recognition and growth. In addition to the CEO's recognition as an "All-Star Entrepreneur", A3T is recognized by Inc Magazine as one of the fastest growing companies in the country, by Vet 50 as Fastest Growing Veteran-Owned Businesses, and is featured in CyberSecurity Ventures / Cybercrime Magazine! "As a go-to Women-Owned Cybersecurity company in US and internationally". As part of our growth, we are looking for YOU to join our growing team. A3T offers excellent benefits to enhance the work-life balance, including: Medical Insurance Dental Insurance Vision Insurance Life Insurance Short Term & Long-Term Disability 401k Retirement Savings Plan with Company Match Paid Holidays Paid Time Off (PTO) Tuition and Professional Development Assistance Parking/Travel Reimbursement (metropolitan areas) Powered by JazzHR EHtDJZuWrC
Job Description Job Description If being a part of a world-class organization that operates in some of the most advanced technological environments around the world sounds like a dream job, Network Connex might be the right fit for you! You'll be part of a team working together to solve customer problems every day, with compensation and benefits that are an investment in your career, financial future, and overall well-being. In addition to competitive base pay, Network Connex offers a comprehensive benefits package designed to support your physical, mental, and financial health you can begin participating in our programs on the first of the month following your start date. Join our Vanguard 401(k) plan, with immediate vesting and a generous company match to help you build long-term financial security. Our team also enjoys 10 paid company holidays, a generous PTO accrual schedule, and access to discounts on useful products and services. Knowledge, Skills and Abilities required: Will manage all phases of Data Center installation Projects. Lead 1 must be able to think strategically and demonstrate "Leadership". Will assume total ownership from the receipt of completed engineering "work package" to delivery of project completion and final documentation Process and compliance focused Ability to work independent of direct supervision; self-starting; Team Player. Good organizational, written, and verbal skills (meticulous regarding documentation). Excellent people skills, customer oriented, willingness to help others. Positive and Proactive approach Willingness to travel. Strong work ethic and ability to have flexible work schedule. Must demonstrate good customer skills. Have total responsibility for the job layout and plan of execution. Must stay current with the latest technologies and installation procedures. Must have a full understanding of the scope of work. Must have the ability to understand and accurately complete all paperwork required of assigned project. Must be able to run small, medium, and large projects when required. Must be fully competent of the Network Connex standard for quality installation craftsmanship and customer service excellence. Must be fully competent at installation and termination of various copper and fiber products in accordance with TIA/EIA standards and BICSI standards. Must be fully competent in testing and troubleshooting of copper and fiber cable plant systems in accordance with TIA/EIA standards and BICSI standards. Must be fully competent at directing his team in assembling, installing, and securing various cable trays, racks, and cabinets used in telecommunications closets. Lead 1 must understand the basic principles of grounding and bonding as described in the BICSI installation methods and must be capable of properly bonding cable trays and properly grounding racks, cable trays, etc. Lead 1 must be knowledgeable in the proper operation of all Network Connex Cat5, Cat5E, Cat6 testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network. Lead 1 must be knowledgeable in the proper operation of Network Connex fiber power meter testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network. Lead 1 must be knowledgeable in the proper operation of an OTDR to include proper operation of the OTDR, properly saving test results and properly downloading and storing the test results on the network. Lead 1 must be fully capable of interpreting test results from fiber and copper testers and successfully troubleshooting and properly repairing the fiber or copper cable plant to ultimately ensure a correct and valid test. Education: High School Diploma or GED required BICSI and industry Certifications are preferred Knowledge of fiber terms and troubleshooting is needed Physical Requirements: The physical demands of this position are those that are necessary to meet the responsibilities and essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Must be able to lift 75lbs and climb ladders as required. As needed Certifications: Preferred - BICSI Technician, Industry manufacturer certifications OSHA30 safety certification HILTI powder actuated tools Requirements: Ability to drive company vehicle throughout the day. This position requires a background check and driver's license check. Ability to lift various items is required, as well to stand for long periods of time and climb ladders. Years of Experience: 5 - 10 EEOC- Minority/Female/Disability/Veteran Network Connex believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
11/16/2026
Full time
Job Description Job Description If being a part of a world-class organization that operates in some of the most advanced technological environments around the world sounds like a dream job, Network Connex might be the right fit for you! You'll be part of a team working together to solve customer problems every day, with compensation and benefits that are an investment in your career, financial future, and overall well-being. In addition to competitive base pay, Network Connex offers a comprehensive benefits package designed to support your physical, mental, and financial health you can begin participating in our programs on the first of the month following your start date. Join our Vanguard 401(k) plan, with immediate vesting and a generous company match to help you build long-term financial security. Our team also enjoys 10 paid company holidays, a generous PTO accrual schedule, and access to discounts on useful products and services. Knowledge, Skills and Abilities required: Will manage all phases of Data Center installation Projects. Lead 1 must be able to think strategically and demonstrate "Leadership". Will assume total ownership from the receipt of completed engineering "work package" to delivery of project completion and final documentation Process and compliance focused Ability to work independent of direct supervision; self-starting; Team Player. Good organizational, written, and verbal skills (meticulous regarding documentation). Excellent people skills, customer oriented, willingness to help others. Positive and Proactive approach Willingness to travel. Strong work ethic and ability to have flexible work schedule. Must demonstrate good customer skills. Have total responsibility for the job layout and plan of execution. Must stay current with the latest technologies and installation procedures. Must have a full understanding of the scope of work. Must have the ability to understand and accurately complete all paperwork required of assigned project. Must be able to run small, medium, and large projects when required. Must be fully competent of the Network Connex standard for quality installation craftsmanship and customer service excellence. Must be fully competent at installation and termination of various copper and fiber products in accordance with TIA/EIA standards and BICSI standards. Must be fully competent in testing and troubleshooting of copper and fiber cable plant systems in accordance with TIA/EIA standards and BICSI standards. Must be fully competent at directing his team in assembling, installing, and securing various cable trays, racks, and cabinets used in telecommunications closets. Lead 1 must understand the basic principles of grounding and bonding as described in the BICSI installation methods and must be capable of properly bonding cable trays and properly grounding racks, cable trays, etc. Lead 1 must be knowledgeable in the proper operation of all Network Connex Cat5, Cat5E, Cat6 testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network. Lead 1 must be knowledgeable in the proper operation of Network Connex fiber power meter testers to include proper operation of the tester, properly saving test results and properly downloading and storing test results on the network. Lead 1 must be knowledgeable in the proper operation of an OTDR to include proper operation of the OTDR, properly saving test results and properly downloading and storing the test results on the network. Lead 1 must be fully capable of interpreting test results from fiber and copper testers and successfully troubleshooting and properly repairing the fiber or copper cable plant to ultimately ensure a correct and valid test. Education: High School Diploma or GED required BICSI and industry Certifications are preferred Knowledge of fiber terms and troubleshooting is needed Physical Requirements: The physical demands of this position are those that are necessary to meet the responsibilities and essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Must be able to lift 75lbs and climb ladders as required. As needed Certifications: Preferred - BICSI Technician, Industry manufacturer certifications OSHA30 safety certification HILTI powder actuated tools Requirements: Ability to drive company vehicle throughout the day. This position requires a background check and driver's license check. Ability to lift various items is required, as well to stand for long periods of time and climb ladders. Years of Experience: 5 - 10 EEOC- Minority/Female/Disability/Veteran Network Connex believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Job Description Job Description Location: Traveling Installer (Regional) Pay Rate: $35 - $40 Duration: Long-Term Contract (6-9 Months) with Potential for Extension or Conversion Schedule: 40 Hours per Week, with Potential Overtime Other: Extensive travel, Nationwide. ( Travel Arrangements Coordinated by INSPYR Solutions) Position Summary INSPYR Solutions is seeking experienced Installation Technicians to support telecommunications and data center deployments throughout the United States . This is a hands-on, travel-based position focused on Central Office (CO), Point of Presence (POP), and network infrastructure environments . Technicians will serve as key onsite representatives, working directly with project managers, Original Equipment Manufacturer (OEM) teams, and Network Operations Center (NOC) teams to support equipment installation, testing, troubleshooting, and system turn-up . Must-Have Requirements (Non-Negotiable) Minimum of 3 years of hands-on telecommunications or network equipment installation experience Experience working in Central Offices (CO), POP sites, and/or Data Centers Ability to read and interpret engineering drawings, wiring diagrams, and installation documentation Experience installing telecommunications and network equipment, including routers, switches, and transport systems Hands-on experience with fiber routing, dressing, and termination Willingness and ability to travel nationwide based on project assignments Ability to clearly explain previous hands-on installation experience, including equipment testing, troubleshooting, and turn-up procedures Nice-to-Have Qualifications DC power installation experience , including running and terminating power to racks and systems, building and installing Relay Rack Assemblies (RLAs) , performing Power Distribution Frame (PDF) to grid connections, and powering up/validating systems Experience installing and supporting optical transport and DWDM systems Experience coordinating with OEM teams and carrier NOCs during equipment installation and turn-up Familiarity with Telcordia standards and OSHA safety requirements Experience performing equipment audits, decommissioning, and system upgrades Experience using telecommunications test equipment , including Optical Power Meters, Fiberscopes, Voltmeters, and Cat6 testers Key Technical Competencies : DC Power Installation & Termination: Understanding of A/B power feeds, power types, and end-to-end DC power installation processes, including rack power-up, testing, and validation Cable Lacing & Grounding: Experience lacing various cable gauges, properly routing and dressing cables, and installing grounding cables Central Office & Data Center Installations: Ability to explain specific installation activities performed in Central Office, POP, and Data Center environments OEM Equipment Installation & Turn-Up: Experience installing and supporting equipment from manufacturers such as Ciena, Infinera, Nokia, Cisco, and Juniper, including installation, testing, turn-up, and basic troubleshooting Fiber Testing & OTDR: Experience testing fiber circuits using OTDR equipment, familiarity with testing tools and models, and ability to interpret test results MPO Fiber Installation: Experience running, cleaning, inspecting, and installing MPO fiber connections while following proper handling procedures Rack & Infrastructure Installation: Experience installing cable racks, ironwork, equipment racks, and cabinets Key Responsibilities Perform installation, maintenance, testing, and troubleshooting of telecommunications equipment in Central Office, POP, and Data Center environments Install telecommunications and MSO network equipment across POP sites, data centers, huts, and repeater locations Perform fiber routing, dressing, termination, and testing in accordance with engineering specifications Support light configuration, testing, and turn-up of OEM network equipment Coordinate with OEM teams and carrier NOCs to support system activation, connectivity testing, and troubleshooting Identify and resolve installation and network connectivity issues in real time Support DC power installations and power builds, including RLAs, PDF connections, and powering systems/racks as needed Conduct equipment audits, decommissioning activities, equipment replacements, and system upgrades Read and interpret engineering drawings, wiring diagrams, and project documentation to ensure accurate installations Follow applicable safety procedures, installation standards, and quality requirements Serve as the primary onsite point of contact for project managers, site representatives, and material/logistics coordination Assist with guiding other technicians onsite to ensure installation quality, efficiency, and adherence to project timelines Maintain accurate installation records, testing documentation, and project status reports Schedule & Work Environment Work Location: Various telecommunications and data center sites throughout the United States Overtime: May be available depending on project requirements; not guaranteed Project Flexibility: Ability to support additional assignments and projects during downtime Work Environment: Hands-on field installation work in Central Offices, POP sites, data centers, telecommunications huts, and other network infrastructure facilities About INSPYR Solutions Technology is our focus and quality is our commitment. As a national expert in delivering flexible technology and talent solutions, we strategically align industry and technical expertise with our clients' business objectives and cultural needs. Our solutions are tailored to each client and include a wide variety of professional services, project, and talent solutions. By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities. INSPYR Solutions provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, INSPYR Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
11/15/2026
Full time
Job Description Job Description Location: Traveling Installer (Regional) Pay Rate: $35 - $40 Duration: Long-Term Contract (6-9 Months) with Potential for Extension or Conversion Schedule: 40 Hours per Week, with Potential Overtime Other: Extensive travel, Nationwide. ( Travel Arrangements Coordinated by INSPYR Solutions) Position Summary INSPYR Solutions is seeking experienced Installation Technicians to support telecommunications and data center deployments throughout the United States . This is a hands-on, travel-based position focused on Central Office (CO), Point of Presence (POP), and network infrastructure environments . Technicians will serve as key onsite representatives, working directly with project managers, Original Equipment Manufacturer (OEM) teams, and Network Operations Center (NOC) teams to support equipment installation, testing, troubleshooting, and system turn-up . Must-Have Requirements (Non-Negotiable) Minimum of 3 years of hands-on telecommunications or network equipment installation experience Experience working in Central Offices (CO), POP sites, and/or Data Centers Ability to read and interpret engineering drawings, wiring diagrams, and installation documentation Experience installing telecommunications and network equipment, including routers, switches, and transport systems Hands-on experience with fiber routing, dressing, and termination Willingness and ability to travel nationwide based on project assignments Ability to clearly explain previous hands-on installation experience, including equipment testing, troubleshooting, and turn-up procedures Nice-to-Have Qualifications DC power installation experience , including running and terminating power to racks and systems, building and installing Relay Rack Assemblies (RLAs) , performing Power Distribution Frame (PDF) to grid connections, and powering up/validating systems Experience installing and supporting optical transport and DWDM systems Experience coordinating with OEM teams and carrier NOCs during equipment installation and turn-up Familiarity with Telcordia standards and OSHA safety requirements Experience performing equipment audits, decommissioning, and system upgrades Experience using telecommunications test equipment , including Optical Power Meters, Fiberscopes, Voltmeters, and Cat6 testers Key Technical Competencies : DC Power Installation & Termination: Understanding of A/B power feeds, power types, and end-to-end DC power installation processes, including rack power-up, testing, and validation Cable Lacing & Grounding: Experience lacing various cable gauges, properly routing and dressing cables, and installing grounding cables Central Office & Data Center Installations: Ability to explain specific installation activities performed in Central Office, POP, and Data Center environments OEM Equipment Installation & Turn-Up: Experience installing and supporting equipment from manufacturers such as Ciena, Infinera, Nokia, Cisco, and Juniper, including installation, testing, turn-up, and basic troubleshooting Fiber Testing & OTDR: Experience testing fiber circuits using OTDR equipment, familiarity with testing tools and models, and ability to interpret test results MPO Fiber Installation: Experience running, cleaning, inspecting, and installing MPO fiber connections while following proper handling procedures Rack & Infrastructure Installation: Experience installing cable racks, ironwork, equipment racks, and cabinets Key Responsibilities Perform installation, maintenance, testing, and troubleshooting of telecommunications equipment in Central Office, POP, and Data Center environments Install telecommunications and MSO network equipment across POP sites, data centers, huts, and repeater locations Perform fiber routing, dressing, termination, and testing in accordance with engineering specifications Support light configuration, testing, and turn-up of OEM network equipment Coordinate with OEM teams and carrier NOCs to support system activation, connectivity testing, and troubleshooting Identify and resolve installation and network connectivity issues in real time Support DC power installations and power builds, including RLAs, PDF connections, and powering systems/racks as needed Conduct equipment audits, decommissioning activities, equipment replacements, and system upgrades Read and interpret engineering drawings, wiring diagrams, and project documentation to ensure accurate installations Follow applicable safety procedures, installation standards, and quality requirements Serve as the primary onsite point of contact for project managers, site representatives, and material/logistics coordination Assist with guiding other technicians onsite to ensure installation quality, efficiency, and adherence to project timelines Maintain accurate installation records, testing documentation, and project status reports Schedule & Work Environment Work Location: Various telecommunications and data center sites throughout the United States Overtime: May be available depending on project requirements; not guaranteed Project Flexibility: Ability to support additional assignments and projects during downtime Work Environment: Hands-on field installation work in Central Offices, POP sites, data centers, telecommunications huts, and other network infrastructure facilities About INSPYR Solutions Technology is our focus and quality is our commitment. As a national expert in delivering flexible technology and talent solutions, we strategically align industry and technical expertise with our clients' business objectives and cultural needs. Our solutions are tailored to each client and include a wide variety of professional services, project, and talent solutions. By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities. INSPYR Solutions provides Equal Employment Opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, INSPYR Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.
Job Description Job Description Installation Technician Location: Based from home. (Targeting candidates that live in the South East) Pay Rate: Between $36 to $40 hourly Duration: Long-Term Contract (12 Months) with Potential for Extension or Conversion Schedule: 40 Hours per Week, with Potential Overtime Other: Extensive travel, Nationwide. (Travel Arrangements Coordinated by INSPYR Solutions) Position Summary INSPYR Solutions is seeking experienced Installation Technicians to support telecommunications and data center deployments throughout the United States . This is a hands-on, travel-based position focused on Central Office (CO), Point of Presence (POP), and network infrastructure environments . Technicians will serve as key onsite representatives, working directly with project managers, Original Equipment Manufacturer (OEM) teams, and Network Operations Center (NOC) teams to support equipment installation, testing, troubleshooting, and system turn-up . This is an anticipated 12 month contract opportunity with the potential for extension or conversion to full-time employment, based on performance and ongoing project needs. Candidates must be willing and able to travel throughout the United States as assignments require . All required business travel is coordinated and booked by INSPYR Solutions, with travel costs billed directly to the client. Client-approved meals and miscellaneous travel expenses are reimbursed weekly . Must-Have Requirements (Non-Negotiable) Minimum of 3 years of hands-on telecommunications or network equipment installation experience Experience working in Central Offices (CO), POP sites, and/or Data Centers Ability to read and interpret engineering drawings, wiring diagrams, and installation documentation Experience installing telecommunications and network equipment, including routers, switches, and transport systems Hands-on experience with fiber routing, dressing, and termination Willingness and ability to travel nationwide based on project assignments Ability to clearly explain previous hands-on installation experience, including equipment testing, troubleshooting, and turn-up procedures Nice-to-Have Qualifications DC power installation experience , including running and terminating power to racks and systems, building and installing Relay Rack Assemblies (RLAs) , performing Power Distribution Frame (PDF) to grid connections, and powering up/validating systems Experience installing and supporting optical transport and DWDM systems Experience coordinating with OEM teams and carrier NOCs during equipment installation and turn-up Familiarity with Telcordia standards and OSHA safety requirements Experience performing equipment audits, decommissioning, and system upgrades Experience using telecommunications test equipment , including Optical Power Meters, Fiberscopes, Voltmeters, and Cat6 testers Key Technical Competencies Candidates should be prepared to discuss their hands-on experience with the following: DC Power Installation & Termination: Understanding of A/B power feeds, power types, and end-to-end DC power installation processes, including rack power-up, testing, and validation Cable Lacing & Grounding: Experience lacing various cable gauges, properly routing and dressing cables, and installing grounding cables Central Office & Data Center Installations: Ability to explain specific installation activities performed in Central Office, POP, and Data Center environments OEM Equipment Installation & Turn-Up: Experience installing and supporting equipment from manufacturers such as Ciena, Infinera, Nokia, Cisco, and Juniper, including installation, testing, turn-up, and basic troubleshooting Fiber Testing & OTDR: Experience testing fiber circuits using OTDR equipment, familiarity with testing tools and models, and ability to interpret test results MPO Fiber Installation: Experience running, cleaning, inspecting, and installing MPO fiber connections while following proper handling procedures Rack & Infrastructure Installation: Experience installing cable racks, ironwork, equipment racks, and cabinets Key Responsibilities Perform installation, maintenance, testing, and troubleshooting of telecommunications equipment in Central Office, POP, and Data Center environments Install telecommunications and MSO network equipment across POP sites, data centers, huts, and repeater locations Perform fiber routing, dressing, termination, and testing in accordance with engineering specifications Support light configuration, testing, and turn-up of OEM network equipment Coordinate with OEM teams and carrier NOCs to support system activation, connectivity testing, and troubleshooting Identify and resolve installation and network connectivity issues in real time Support DC power installations and power builds, including RLAs, PDF connections, and powering systems/racks as needed Conduct equipment audits, decommissioning activities, equipment replacements, and system upgrades Read and interpret engineering drawings, wiring diagrams, and project documentation to ensure accurate installations Follow applicable safety procedures, installation standards, and quality requirements Serve as the primary onsite point of contact for project managers, site representatives, and material/logistics coordination Assist with guiding other technicians onsite to ensure installation quality, efficiency, and adherence to project timelines Maintain accurate installation records, testing documentation, and project status reports Travel & Expense Reimbursement This position requires nationwide travel to support telecommunications infrastructure projects across the United States. Travel Arrangements: Required business travel is coordinated and booked by INSPYR Solutions. Travel Costs: Travel booked by INSPYR Solutions is billed directly to the client. Meals & Miscellaneous Expenses: Client-approved meals and miscellaneous travel-related expenses are reimbursed to technicians on a weekly basis. Expense Approval: Reimbursement is subject to client approval and applicable travel and expense policies. Travel Flexibility:Technicians must be willing to travel to various project locations throughout the United Statesas assignments and business needs change. Schedule & Work Environment Work Location: Various telecommunications and data center sites throughout the United States Standard Schedule: 40 hours per week once assigned to an active project Overtime: May be available depending on project requirements; not guaranteed Project Flexibility: Ability to support additional assignments and projects during downtime Work Environment: Hands-on field installation work in Central Offices, POP sites, data centers, telecommunications huts, and other network infrastructure facilities Prescreening Questions Are you willing and able to travel extensively for this role, including overnight travel as needed? Please describe your travel availability. Do you have a valid driver's license? Are you comfortable undergoing an MVR check, drug test (including a breathalyzer if required), and background check? How many years of Central Office (CO) and/or Data Center installation experience do you have? Do you have experience installing cable racks, ironwork, and mounting equipment racks or cabinets? Please provide details. Do you have experience running power to a main BDFB, including lacing and landing cables on both ends? Please describe your experience. Do you have experience installing and terminating DC power? What types of DC power systems have you worked with? Are you experienced with cable lacing across various cable gauges, including grounding cables? Please explain your experience. How many years of cable lacing experience do you have? Do you have experience working with MPO fiber (running, cleaning, installing, or testing)? Please describe your experience. What experience do you have testing fiber circuits using an OTDR? Which OTDR equipment have you used, and how would you rate your proficiency on a scale of 1-10? What experience do you have working with telecommunications and networking equipment such as Ciena, Infinera, Nokia, Cisco, or Juniper? Please describe your installation, testing, provisioning, and turn-up experience. About INSPYR Solutions Technology is our focus and quality is our commitment. As a national expert in delivering flexible technology and talent solutions, we strategically align industry and technical expertise with our clients' business objectives and cultural needs. Our solutions are tailored to each client and include a wide variety of professional services, project, and talent solutions. By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities click apply for full job details
11/15/2026
Full time
Job Description Job Description Installation Technician Location: Based from home. (Targeting candidates that live in the South East) Pay Rate: Between $36 to $40 hourly Duration: Long-Term Contract (12 Months) with Potential for Extension or Conversion Schedule: 40 Hours per Week, with Potential Overtime Other: Extensive travel, Nationwide. (Travel Arrangements Coordinated by INSPYR Solutions) Position Summary INSPYR Solutions is seeking experienced Installation Technicians to support telecommunications and data center deployments throughout the United States . This is a hands-on, travel-based position focused on Central Office (CO), Point of Presence (POP), and network infrastructure environments . Technicians will serve as key onsite representatives, working directly with project managers, Original Equipment Manufacturer (OEM) teams, and Network Operations Center (NOC) teams to support equipment installation, testing, troubleshooting, and system turn-up . This is an anticipated 12 month contract opportunity with the potential for extension or conversion to full-time employment, based on performance and ongoing project needs. Candidates must be willing and able to travel throughout the United States as assignments require . All required business travel is coordinated and booked by INSPYR Solutions, with travel costs billed directly to the client. Client-approved meals and miscellaneous travel expenses are reimbursed weekly . Must-Have Requirements (Non-Negotiable) Minimum of 3 years of hands-on telecommunications or network equipment installation experience Experience working in Central Offices (CO), POP sites, and/or Data Centers Ability to read and interpret engineering drawings, wiring diagrams, and installation documentation Experience installing telecommunications and network equipment, including routers, switches, and transport systems Hands-on experience with fiber routing, dressing, and termination Willingness and ability to travel nationwide based on project assignments Ability to clearly explain previous hands-on installation experience, including equipment testing, troubleshooting, and turn-up procedures Nice-to-Have Qualifications DC power installation experience , including running and terminating power to racks and systems, building and installing Relay Rack Assemblies (RLAs) , performing Power Distribution Frame (PDF) to grid connections, and powering up/validating systems Experience installing and supporting optical transport and DWDM systems Experience coordinating with OEM teams and carrier NOCs during equipment installation and turn-up Familiarity with Telcordia standards and OSHA safety requirements Experience performing equipment audits, decommissioning, and system upgrades Experience using telecommunications test equipment , including Optical Power Meters, Fiberscopes, Voltmeters, and Cat6 testers Key Technical Competencies Candidates should be prepared to discuss their hands-on experience with the following: DC Power Installation & Termination: Understanding of A/B power feeds, power types, and end-to-end DC power installation processes, including rack power-up, testing, and validation Cable Lacing & Grounding: Experience lacing various cable gauges, properly routing and dressing cables, and installing grounding cables Central Office & Data Center Installations: Ability to explain specific installation activities performed in Central Office, POP, and Data Center environments OEM Equipment Installation & Turn-Up: Experience installing and supporting equipment from manufacturers such as Ciena, Infinera, Nokia, Cisco, and Juniper, including installation, testing, turn-up, and basic troubleshooting Fiber Testing & OTDR: Experience testing fiber circuits using OTDR equipment, familiarity with testing tools and models, and ability to interpret test results MPO Fiber Installation: Experience running, cleaning, inspecting, and installing MPO fiber connections while following proper handling procedures Rack & Infrastructure Installation: Experience installing cable racks, ironwork, equipment racks, and cabinets Key Responsibilities Perform installation, maintenance, testing, and troubleshooting of telecommunications equipment in Central Office, POP, and Data Center environments Install telecommunications and MSO network equipment across POP sites, data centers, huts, and repeater locations Perform fiber routing, dressing, termination, and testing in accordance with engineering specifications Support light configuration, testing, and turn-up of OEM network equipment Coordinate with OEM teams and carrier NOCs to support system activation, connectivity testing, and troubleshooting Identify and resolve installation and network connectivity issues in real time Support DC power installations and power builds, including RLAs, PDF connections, and powering systems/racks as needed Conduct equipment audits, decommissioning activities, equipment replacements, and system upgrades Read and interpret engineering drawings, wiring diagrams, and project documentation to ensure accurate installations Follow applicable safety procedures, installation standards, and quality requirements Serve as the primary onsite point of contact for project managers, site representatives, and material/logistics coordination Assist with guiding other technicians onsite to ensure installation quality, efficiency, and adherence to project timelines Maintain accurate installation records, testing documentation, and project status reports Travel & Expense Reimbursement This position requires nationwide travel to support telecommunications infrastructure projects across the United States. Travel Arrangements: Required business travel is coordinated and booked by INSPYR Solutions. Travel Costs: Travel booked by INSPYR Solutions is billed directly to the client. Meals & Miscellaneous Expenses: Client-approved meals and miscellaneous travel-related expenses are reimbursed to technicians on a weekly basis. Expense Approval: Reimbursement is subject to client approval and applicable travel and expense policies. Travel Flexibility:Technicians must be willing to travel to various project locations throughout the United Statesas assignments and business needs change. Schedule & Work Environment Work Location: Various telecommunications and data center sites throughout the United States Standard Schedule: 40 hours per week once assigned to an active project Overtime: May be available depending on project requirements; not guaranteed Project Flexibility: Ability to support additional assignments and projects during downtime Work Environment: Hands-on field installation work in Central Offices, POP sites, data centers, telecommunications huts, and other network infrastructure facilities Prescreening Questions Are you willing and able to travel extensively for this role, including overnight travel as needed? Please describe your travel availability. Do you have a valid driver's license? Are you comfortable undergoing an MVR check, drug test (including a breathalyzer if required), and background check? How many years of Central Office (CO) and/or Data Center installation experience do you have? Do you have experience installing cable racks, ironwork, and mounting equipment racks or cabinets? Please provide details. Do you have experience running power to a main BDFB, including lacing and landing cables on both ends? Please describe your experience. Do you have experience installing and terminating DC power? What types of DC power systems have you worked with? Are you experienced with cable lacing across various cable gauges, including grounding cables? Please explain your experience. How many years of cable lacing experience do you have? Do you have experience working with MPO fiber (running, cleaning, installing, or testing)? Please describe your experience. What experience do you have testing fiber circuits using an OTDR? Which OTDR equipment have you used, and how would you rate your proficiency on a scale of 1-10? What experience do you have working with telecommunications and networking equipment such as Ciena, Infinera, Nokia, Cisco, or Juniper? Please describe your installation, testing, provisioning, and turn-up experience. About INSPYR Solutions Technology is our focus and quality is our commitment. As a national expert in delivering flexible technology and talent solutions, we strategically align industry and technical expertise with our clients' business objectives and cultural needs. Our solutions are tailored to each client and include a wide variety of professional services, project, and talent solutions. By always striving for excellence and focusing on the human aspect of our business, we work seamlessly with our talent and clients to match the right solutions to the right opportunities click apply for full job details
Job Description Job Description About Vortex IT Systems Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Electronic Security Technician II to join our field operations team. This position is ideal for a skilled technician who can independently install, configure, troubleshoot, and service electronic security systems while maintaining high standards of workmanship, safety, and customer satisfaction. This is not an entry-level position. We are looking for a hands-on professional with at least four years of relevant experience who is comfortable managing assigned installations and service calls with minimal supervision. Key Responsibilities 1. Video Surveillance & CCTV Systems Install, configure, maintain, and troubleshoot IP security cameras, NVRs, and video management systems. Install dome, bullet, turret, PTZ, and other commercial surveillance cameras. Configure IP addressing, PoE switches, recording schedules, motion detection, and remote access. Troubleshoot video loss, network connectivity, storage, and recording issues. Optimize camera positioning, image quality, and coverage. Perform system testing, commissioning, and customer demonstrations. Work with platforms such as Uniview, UniFi Protect, Axis, Hanwha, Hikvision, or equivalent systems. 2. Electronic Access Control Systems Install, wire, configure, and service electronic access control systems. Install card readers, keypads, controllers, magnetic locks, electric strikes, door contacts, and request-to-exit devices. Configure access permissions, credentials, schedules, door groups, and user accounts. Troubleshoot door controllers, relays, power supplies, locking hardware, and communication failures. Integrate access control equipment with existing network infrastructure. Perform functional testing and commissioning, including verification of required emergency egress and life-safety functions. Work with platforms such as UniFi Access, Uniview, HID, Mercury-based systems, Genetec, or equivalent solutions. 3. Burglar Alarm & Intrusion Detection Systems Install, program, test, maintain, and troubleshoot intrusion detection systems. Install alarm control panels, keypads, motion detectors, door/window contacts, glass-break detectors, and sirens. Configure alarm zones, user codes, entry/exit delays, and communication modules. Diagnose alarm faults, false alarms, sensor failures, and communication problems. Perform system testing, commissioning, and customer training. Experience with DSC, Honeywell/Resideo, Qolsys, Bosch, DMP, or equivalent systems is preferred. 4. Low-Voltage Cabling & Installation Install and terminate Cat5e/Cat6, security, and other low-voltage cabling. Install conduit, raceways, cable supports, junction boxes, and equipment enclosures. Read and interpret construction drawings, wiring diagrams, and technical documentation. Use cable testers, multimeters, network diagnostic tools, and standard installation equipment. Maintain professional cable management, labeling, and installation standards. Follow applicable electrical, building, fire, and life-safety codes. 5. Troubleshooting, Service & Customer Support Independently diagnose and resolve security system hardware, software, wiring, and network issues. Perform service calls, equipment replacements, preventive maintenance, and system upgrades. Complete assigned installations and service tasks efficiently and professionally. Maintain accurate service reports, installation documentation, and equipment records. Communicate project updates, technical findings, and recommendations to customers and management. Provide customer training on installed security systems. Coordinate with project managers, other technicians, and subcontractors when necessary. Required Qualifications Minimum 4 years of professional experience installing, servicing, or troubleshooting electronic security systems. Strong hands-on experience with IP video surveillance systems. Practical experience installing, wiring, and configuring electronic access control systems. Working knowledge of burglar alarm and intrusion detection systems. Ability to independently complete standard security installations and service calls. Solid understanding of TCP/IP networking, IP addressing, PoE, and network switches. Ability to troubleshoot low-voltage electrical circuits, relays, power supplies, and field devices. Ability to read and interpret wiring diagrams, equipment manuals, and construction plans. Proficiency with common installation tools, cable testers, and multimeters. Valid driver's license and acceptable driving record. Ability to lift up to 50 pounds and safely work on ladders or lifts when properly trained. Strong communication, problem-solving, organizational, and customer service skills. Ability to pass applicable background screening and satisfy customer site-access requirements. Preferred Qualifications Five or more years of security systems installation and service experience. Independent programming experience with commercial burglar alarm systems. Experience commissioning multi-door access control systems. Experience with Uniview, UniFi Protect, UniFi Access, Mercury, HID, Genetec, or similar platforms. Experience with DSC, Honeywell, Bosch, DMP, or Qolsys alarm systems. Understanding of commercial door hardware and electrified locking systems. Experience with VLANs, VPNs, remote access, and advanced network troubleshooting. Experience with commercial, industrial, and multifamily residential security projects. Manufacturer certifications, OSHA 10, or aerial lift certification. Ability to identify installation deficiencies and recommend practical technical solutions. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team.
11/15/2026
Full time
Job Description Job Description About Vortex IT Systems Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Electronic Security Technician II to join our field operations team. This position is ideal for a skilled technician who can independently install, configure, troubleshoot, and service electronic security systems while maintaining high standards of workmanship, safety, and customer satisfaction. This is not an entry-level position. We are looking for a hands-on professional with at least four years of relevant experience who is comfortable managing assigned installations and service calls with minimal supervision. Key Responsibilities 1. Video Surveillance & CCTV Systems Install, configure, maintain, and troubleshoot IP security cameras, NVRs, and video management systems. Install dome, bullet, turret, PTZ, and other commercial surveillance cameras. Configure IP addressing, PoE switches, recording schedules, motion detection, and remote access. Troubleshoot video loss, network connectivity, storage, and recording issues. Optimize camera positioning, image quality, and coverage. Perform system testing, commissioning, and customer demonstrations. Work with platforms such as Uniview, UniFi Protect, Axis, Hanwha, Hikvision, or equivalent systems. 2. Electronic Access Control Systems Install, wire, configure, and service electronic access control systems. Install card readers, keypads, controllers, magnetic locks, electric strikes, door contacts, and request-to-exit devices. Configure access permissions, credentials, schedules, door groups, and user accounts. Troubleshoot door controllers, relays, power supplies, locking hardware, and communication failures. Integrate access control equipment with existing network infrastructure. Perform functional testing and commissioning, including verification of required emergency egress and life-safety functions. Work with platforms such as UniFi Access, Uniview, HID, Mercury-based systems, Genetec, or equivalent solutions. 3. Burglar Alarm & Intrusion Detection Systems Install, program, test, maintain, and troubleshoot intrusion detection systems. Install alarm control panels, keypads, motion detectors, door/window contacts, glass-break detectors, and sirens. Configure alarm zones, user codes, entry/exit delays, and communication modules. Diagnose alarm faults, false alarms, sensor failures, and communication problems. Perform system testing, commissioning, and customer training. Experience with DSC, Honeywell/Resideo, Qolsys, Bosch, DMP, or equivalent systems is preferred. 4. Low-Voltage Cabling & Installation Install and terminate Cat5e/Cat6, security, and other low-voltage cabling. Install conduit, raceways, cable supports, junction boxes, and equipment enclosures. Read and interpret construction drawings, wiring diagrams, and technical documentation. Use cable testers, multimeters, network diagnostic tools, and standard installation equipment. Maintain professional cable management, labeling, and installation standards. Follow applicable electrical, building, fire, and life-safety codes. 5. Troubleshooting, Service & Customer Support Independently diagnose and resolve security system hardware, software, wiring, and network issues. Perform service calls, equipment replacements, preventive maintenance, and system upgrades. Complete assigned installations and service tasks efficiently and professionally. Maintain accurate service reports, installation documentation, and equipment records. Communicate project updates, technical findings, and recommendations to customers and management. Provide customer training on installed security systems. Coordinate with project managers, other technicians, and subcontractors when necessary. Required Qualifications Minimum 4 years of professional experience installing, servicing, or troubleshooting electronic security systems. Strong hands-on experience with IP video surveillance systems. Practical experience installing, wiring, and configuring electronic access control systems. Working knowledge of burglar alarm and intrusion detection systems. Ability to independently complete standard security installations and service calls. Solid understanding of TCP/IP networking, IP addressing, PoE, and network switches. Ability to troubleshoot low-voltage electrical circuits, relays, power supplies, and field devices. Ability to read and interpret wiring diagrams, equipment manuals, and construction plans. Proficiency with common installation tools, cable testers, and multimeters. Valid driver's license and acceptable driving record. Ability to lift up to 50 pounds and safely work on ladders or lifts when properly trained. Strong communication, problem-solving, organizational, and customer service skills. Ability to pass applicable background screening and satisfy customer site-access requirements. Preferred Qualifications Five or more years of security systems installation and service experience. Independent programming experience with commercial burglar alarm systems. Experience commissioning multi-door access control systems. Experience with Uniview, UniFi Protect, UniFi Access, Mercury, HID, Genetec, or similar platforms. Experience with DSC, Honeywell, Bosch, DMP, or Qolsys alarm systems. Understanding of commercial door hardware and electrified locking systems. Experience with VLANs, VPNs, remote access, and advanced network troubleshooting. Experience with commercial, industrial, and multifamily residential security projects. Manufacturer certifications, OSHA 10, or aerial lift certification. Ability to identify installation deficiencies and recommend practical technical solutions. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team.
Job Description Job Description Description: Job Summary Doota US is seeking a The Telecommunications Cable Tester is responsible for testing, certifying, troubleshooting, and documenting installed Cat6 telecommunications cabling systems using TREND Networks cable testing equipment. This position works closely with cable installation crews, field supervisors, and project management to verify that installed cabling meets project specifications, manufacturer requirements, and applicable industry standards. Primary Responsibilities Perform Cat6 cable testing and certification using TREND Networks cable testers or approved equivalent equipment. Verify cable performance and connectivity, including: - Wire map - Cable length - Insertion loss - NEXT / PS NEXT - Return loss - ACR-N / ACR-F - Propagation delay and delay skew Confirm that installed Cat6 cabling meets required performance standards and project specifications. Identify and troubleshoot failed cable tests: - Diagnose common issues including: - Improper termination - Open or short circuits - Split pairs - Damaged cable - Excessive cable length - Connector or jack issues - Installation-related defects Coordinate with installation crews to correct deficiencies and perform re-testing. Verify cable IDs, labels, equipment locations, patch-panel locations, and termination points against drawings and cable schedules. Test communication cabling between network cabinets, patch panels, field equipment, and equipment-side communication ports. Record and maintain accurate PASS/FAIL test results. Save, organize, and submit electronic cable test reports according to project naming and documentation requirements. Support punch-list activities and final cable acceptance testing. Maintain TREND Networks testing equipment, adapters, test leads, and related tools in proper working condition. Follow company and project-specific safety requirements while working in an active industrial or construction environment. Requirements: Required Qualifications Hands-on experience testing Cat6 structured cabling systems. Experience operating TREND Networks cable testing equipment or similar professional network cable testers. Understanding of RJ45 termination, patch panels, jacks, and structured cabling systems. Ability to read cable schedules, telecommunications drawings, floor plans, and equipment location information. Ability to troubleshoot copper cabling failures and installation defects. Basic knowledge of Cat6 cabling standards and structured cabling installation practices. Ability to accurately record and organize high-volume cable test results. Good communication skills and ability to coordinate with field installers, supervisors, and project management. Ability to work safely in an active construction environment. Preferred Qualifications Experience with TREND Networks professional cable certification testers, including LanTEK-series equipment or equivalent. Experience exporting and managing electronic test reports from TREND Networks testing equipment. Previous experience on semiconductor, data center, manufacturing, industrial, or large commercial construction projects. Experience performing high-volume Cat6 certification testing. BICSI or structured cabling certifications are preferred but not required. Who We Are At Doota Industrial America, we foster a vibrant environment that nurtures creativity, collaboration, and professional growth. As part of our family, you will have access to resources and support that empowers you to excel. Our commitment to culture, integrity, and continuous improvement lies at the core of our mission, propelling us to transcend industry boundaries and make lasting, positive impacts on the world. Embark on an exhilarating journey with Doota Industrial America, where we unite forwardthinking pioneers driven by a passion for innovation. We are expanding our dynamic teams with individuals eager to collaborate, build communities, and shape a brighter future together. Our doors are open to candidates from all walks of life, with diverse experiences, skill sets, and backgrounds, as we embrace the power of inclusion and diversity in our work culture. Equal Opportunity Employer, are committed to creating a diverse and inclusive company culture and that your team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law, and it is the company's commitment to creating an inclusive workplace and how candidates can request reasonable accommodations
11/14/2026
Full time
Job Description Job Description Description: Job Summary Doota US is seeking a The Telecommunications Cable Tester is responsible for testing, certifying, troubleshooting, and documenting installed Cat6 telecommunications cabling systems using TREND Networks cable testing equipment. This position works closely with cable installation crews, field supervisors, and project management to verify that installed cabling meets project specifications, manufacturer requirements, and applicable industry standards. Primary Responsibilities Perform Cat6 cable testing and certification using TREND Networks cable testers or approved equivalent equipment. Verify cable performance and connectivity, including: - Wire map - Cable length - Insertion loss - NEXT / PS NEXT - Return loss - ACR-N / ACR-F - Propagation delay and delay skew Confirm that installed Cat6 cabling meets required performance standards and project specifications. Identify and troubleshoot failed cable tests: - Diagnose common issues including: - Improper termination - Open or short circuits - Split pairs - Damaged cable - Excessive cable length - Connector or jack issues - Installation-related defects Coordinate with installation crews to correct deficiencies and perform re-testing. Verify cable IDs, labels, equipment locations, patch-panel locations, and termination points against drawings and cable schedules. Test communication cabling between network cabinets, patch panels, field equipment, and equipment-side communication ports. Record and maintain accurate PASS/FAIL test results. Save, organize, and submit electronic cable test reports according to project naming and documentation requirements. Support punch-list activities and final cable acceptance testing. Maintain TREND Networks testing equipment, adapters, test leads, and related tools in proper working condition. Follow company and project-specific safety requirements while working in an active industrial or construction environment. Requirements: Required Qualifications Hands-on experience testing Cat6 structured cabling systems. Experience operating TREND Networks cable testing equipment or similar professional network cable testers. Understanding of RJ45 termination, patch panels, jacks, and structured cabling systems. Ability to read cable schedules, telecommunications drawings, floor plans, and equipment location information. Ability to troubleshoot copper cabling failures and installation defects. Basic knowledge of Cat6 cabling standards and structured cabling installation practices. Ability to accurately record and organize high-volume cable test results. Good communication skills and ability to coordinate with field installers, supervisors, and project management. Ability to work safely in an active construction environment. Preferred Qualifications Experience with TREND Networks professional cable certification testers, including LanTEK-series equipment or equivalent. Experience exporting and managing electronic test reports from TREND Networks testing equipment. Previous experience on semiconductor, data center, manufacturing, industrial, or large commercial construction projects. Experience performing high-volume Cat6 certification testing. BICSI or structured cabling certifications are preferred but not required. Who We Are At Doota Industrial America, we foster a vibrant environment that nurtures creativity, collaboration, and professional growth. As part of our family, you will have access to resources and support that empowers you to excel. Our commitment to culture, integrity, and continuous improvement lies at the core of our mission, propelling us to transcend industry boundaries and make lasting, positive impacts on the world. Embark on an exhilarating journey with Doota Industrial America, where we unite forwardthinking pioneers driven by a passion for innovation. We are expanding our dynamic teams with individuals eager to collaborate, build communities, and shape a brighter future together. Our doors are open to candidates from all walks of life, with diverse experiences, skill sets, and backgrounds, as we embrace the power of inclusion and diversity in our work culture. Equal Opportunity Employer, are committed to creating a diverse and inclusive company culture and that your team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law, and it is the company's commitment to creating an inclusive workplace and how candidates can request reasonable accommodations
Job Description Job Description Job Summary We are seeking skilled and dependable Data Center Technicians to support data center infrastructure projects throughout New Jersey. This position is ideal for technicians with hands-on experience in structured cabling, fiber optics, copper cabling, equipment installation, and data center buildouts. Technicians will work alongside project managers, engineers, and installation teams to support new installations, upgrades, maintenance, and ongoing infrastructure projects. We are looking for individuals who take pride in their workmanship, follow safety standards, and can work efficiently in a fast-paced technical environment. Responsibilities Install, route, dress, label, and terminate structured cabling, including Cat5e, Cat6, and Cat6A. Install, terminate, test, and troubleshoot fiber optic cabling. Perform rack and stack installations of servers, switches, patch panels, and related network equipment. Install cable trays, ladder racks, and other cable management infrastructure. Perform copper and fiber testing, troubleshooting, and documentation. Read and follow cabling diagrams, floor plans, rack elevations, and installation drawings. Maintain organized cable pathways and ensure professional installation standards. Assist with data center buildouts, expansions, equipment deployments, and infrastructure upgrades. Follow site-specific safety procedures and data center access protocols. Coordinate with field supervisors, project managers, and other technicians to meet project deadlines. Qualifications Previous experience in data centers, structured cabling, telecommunications, or low-voltage installation. Working knowledge of copper cabling, fiber optics, patch panels, and network racks. Familiarity with rack-and-stack installations and cable management practices. Ability to use basic hand tools and cabling test equipment. Strong attention to detail, organization, and job-site safety. Reliable transportation and the ability to travel to project sites throughout New Jersey. Ability to work independently and as part of a team. Preferred Qualifications Experience working in live data center environments. Fiber optic termination, splicing, and testing experience. Experience with Fluke testers, OTDRs, or other cable certification equipment. Knowledge of MPO/MTP fiber connectivity and high-density cabling. Experience supporting enterprise networking or server infrastructure. Relevant industry certifications, such as BICSI, FOA, or manufacturer-specific training. What We Offer Competitive pay based on experience and technical skill. Opportunities to work on data center and critical infrastructure projects. Full-time and contract assignments, depending on project needs. Opportunities for ongoing work and professional development. A team-oriented environment with opportunities to expand your technical experience.
11/06/2026
Full time
Job Description Job Description Job Summary We are seeking skilled and dependable Data Center Technicians to support data center infrastructure projects throughout New Jersey. This position is ideal for technicians with hands-on experience in structured cabling, fiber optics, copper cabling, equipment installation, and data center buildouts. Technicians will work alongside project managers, engineers, and installation teams to support new installations, upgrades, maintenance, and ongoing infrastructure projects. We are looking for individuals who take pride in their workmanship, follow safety standards, and can work efficiently in a fast-paced technical environment. Responsibilities Install, route, dress, label, and terminate structured cabling, including Cat5e, Cat6, and Cat6A. Install, terminate, test, and troubleshoot fiber optic cabling. Perform rack and stack installations of servers, switches, patch panels, and related network equipment. Install cable trays, ladder racks, and other cable management infrastructure. Perform copper and fiber testing, troubleshooting, and documentation. Read and follow cabling diagrams, floor plans, rack elevations, and installation drawings. Maintain organized cable pathways and ensure professional installation standards. Assist with data center buildouts, expansions, equipment deployments, and infrastructure upgrades. Follow site-specific safety procedures and data center access protocols. Coordinate with field supervisors, project managers, and other technicians to meet project deadlines. Qualifications Previous experience in data centers, structured cabling, telecommunications, or low-voltage installation. Working knowledge of copper cabling, fiber optics, patch panels, and network racks. Familiarity with rack-and-stack installations and cable management practices. Ability to use basic hand tools and cabling test equipment. Strong attention to detail, organization, and job-site safety. Reliable transportation and the ability to travel to project sites throughout New Jersey. Ability to work independently and as part of a team. Preferred Qualifications Experience working in live data center environments. Fiber optic termination, splicing, and testing experience. Experience with Fluke testers, OTDRs, or other cable certification equipment. Knowledge of MPO/MTP fiber connectivity and high-density cabling. Experience supporting enterprise networking or server infrastructure. Relevant industry certifications, such as BICSI, FOA, or manufacturer-specific training. What We Offer Competitive pay based on experience and technical skill. Opportunities to work on data center and critical infrastructure projects. Full-time and contract assignments, depending on project needs. Opportunities for ongoing work and professional development. A team-oriented environment with opportunities to expand your technical experience.
Job Description Job Description Job title-Data Center Technician Location-Washington DC Job type-1099 Contract Role and Responsibilities: Minimum years of experience: 1 - 3 Years, prefer 3-5+ years Complete all activities associated with physically placing equipment identified in project specification documents including but not limited to routing, lacing, labeling, terminating and local/remote testing, and turn up of Ethernet, switchboard, fiber, and power cables. Handling, installation, and troubleshooting of Ethernet and fiber cables and connectors, including but not limited to CAT 5, CAT6, structured cable, fan-outs, single mode, multi-mode, RJ45, MTP/MPO, and LC. Familiar with different types of fiber connectors (LC, SC & MPO/MPT, etc) and fiber cables (Single Mode/Multi Mode, Bundle Fiber, and MPO-MPO/LC-LC/LC-SC fiber patch cords). The ability to use basic fiber testing tools including but not limited to Optical power meter, Optical laser source, Visual fault locator (VFL), OTDR, Optical Spectrum Analyzer (OSA), Bit Error Rate Testers (BERT), Live Fiber Detector (LFD)and Fiberscope. Analyze and resolve network issues associated with equipment installations/removals. Perform and assist card-level troubleshooting and replacement procedures with assistance from control centers and/or back-office engineers. Understand Servers (HP, Dell or Equivalent) Hardware Handling: Replacement Array cache/battery units, Internal storage array controller cards, Internal host bus adapter (HBA)/ fiber channel cards, hard disk drive (HDD) media, Processors or CPUs and individual memory modules. Replacement of system boards for servers and updating of applicable firmware information (BIOS settings, serial number, etc.). Understand Servers (HP, Dell, or Equivalent) Software Handling: Configuration Management (Initial server BIOS configuration, asset tag, serial number, MAC address recording, and completion of requested documentation associated with server pre-configuration). Software configurations & install for requiring direct physical media connection (e.g. USB key). Interpret and follow detailed methods of procedures (MOPS) and engineering documents / diagrams. Review project specifications to validate equipment placement, cable assignments and determine cable lengths then document results in proprietary databases. Provide timely and accurate feedback to site survey requests. Understand and follow all common and industry-specific safety standards to protect personnel and assure network integrity/reliability. Communicate as required with multiple departments to optimize project scheduling, resolve roadblocks, and coordinate material deliveries. Inventory, receive, and ship materials using appropriate databases. Document project milestones, notes, job information memorandum, and submit ready-for-service notifications in ETS in English to gain Operations acceptance for all completed projects. Other duties as assigned. We also regard the following qualifications as very important: Must be able to work outside of normal business hours (i.e., shift work), including nights and weekends, when needed. Prior experience working as a Field Technician or Field Engineer in the Telecommunications Industry is highly desired. In-depth knowledge of Fiber Optics and IP transport equipment installation and basic testing methods and procedures (MOPs). Knowledge of operating principles of wireline and IP transport environments. Ability to interpret and perform tasks outlined in MOPs, vendor documentation, technical specifications, network practices, engineering letters, and job aids. Ability to identify all colors associated with telecommunications cable and equipment indicator lights. Ability to work from a ladder or lift in an overhead rack or grid for extended periods of time pulling long lengths of heavy cables. Ability to learn and retain physical and mechanical installation specifications. Must be a self-starter with the ability to work independently without continuous supervision. Must be a team player and have excellent interpersonal communication skills. Excellent organizational and administrative skills. Effective written and oral communication skills in the English language. Ability to exercise flexibility in challenging and/or perplexing situations. Ability to multi-task and maintain composure in stressful and demanding work environments. Understanding of basic mechanical terms and tools. The ability to use hand tools, power tools, and industry test equipment including VeEX & EXFO. Possess a smartphone capable of taking pictures and utilizing apps.
09/29/2026
Full time
Job Description Job Description Job title-Data Center Technician Location-Washington DC Job type-1099 Contract Role and Responsibilities: Minimum years of experience: 1 - 3 Years, prefer 3-5+ years Complete all activities associated with physically placing equipment identified in project specification documents including but not limited to routing, lacing, labeling, terminating and local/remote testing, and turn up of Ethernet, switchboard, fiber, and power cables. Handling, installation, and troubleshooting of Ethernet and fiber cables and connectors, including but not limited to CAT 5, CAT6, structured cable, fan-outs, single mode, multi-mode, RJ45, MTP/MPO, and LC. Familiar with different types of fiber connectors (LC, SC & MPO/MPT, etc) and fiber cables (Single Mode/Multi Mode, Bundle Fiber, and MPO-MPO/LC-LC/LC-SC fiber patch cords). The ability to use basic fiber testing tools including but not limited to Optical power meter, Optical laser source, Visual fault locator (VFL), OTDR, Optical Spectrum Analyzer (OSA), Bit Error Rate Testers (BERT), Live Fiber Detector (LFD)and Fiberscope. Analyze and resolve network issues associated with equipment installations/removals. Perform and assist card-level troubleshooting and replacement procedures with assistance from control centers and/or back-office engineers. Understand Servers (HP, Dell or Equivalent) Hardware Handling: Replacement Array cache/battery units, Internal storage array controller cards, Internal host bus adapter (HBA)/ fiber channel cards, hard disk drive (HDD) media, Processors or CPUs and individual memory modules. Replacement of system boards for servers and updating of applicable firmware information (BIOS settings, serial number, etc.). Understand Servers (HP, Dell, or Equivalent) Software Handling: Configuration Management (Initial server BIOS configuration, asset tag, serial number, MAC address recording, and completion of requested documentation associated with server pre-configuration). Software configurations & install for requiring direct physical media connection (e.g. USB key). Interpret and follow detailed methods of procedures (MOPS) and engineering documents / diagrams. Review project specifications to validate equipment placement, cable assignments and determine cable lengths then document results in proprietary databases. Provide timely and accurate feedback to site survey requests. Understand and follow all common and industry-specific safety standards to protect personnel and assure network integrity/reliability. Communicate as required with multiple departments to optimize project scheduling, resolve roadblocks, and coordinate material deliveries. Inventory, receive, and ship materials using appropriate databases. Document project milestones, notes, job information memorandum, and submit ready-for-service notifications in ETS in English to gain Operations acceptance for all completed projects. Other duties as assigned. We also regard the following qualifications as very important: Must be able to work outside of normal business hours (i.e., shift work), including nights and weekends, when needed. Prior experience working as a Field Technician or Field Engineer in the Telecommunications Industry is highly desired. In-depth knowledge of Fiber Optics and IP transport equipment installation and basic testing methods and procedures (MOPs). Knowledge of operating principles of wireline and IP transport environments. Ability to interpret and perform tasks outlined in MOPs, vendor documentation, technical specifications, network practices, engineering letters, and job aids. Ability to identify all colors associated with telecommunications cable and equipment indicator lights. Ability to work from a ladder or lift in an overhead rack or grid for extended periods of time pulling long lengths of heavy cables. Ability to learn and retain physical and mechanical installation specifications. Must be a self-starter with the ability to work independently without continuous supervision. Must be a team player and have excellent interpersonal communication skills. Excellent organizational and administrative skills. Effective written and oral communication skills in the English language. Ability to exercise flexibility in challenging and/or perplexing situations. Ability to multi-task and maintain composure in stressful and demanding work environments. Understanding of basic mechanical terms and tools. The ability to use hand tools, power tools, and industry test equipment including VeEX & EXFO. Possess a smartphone capable of taking pictures and utilizing apps.
Job Description Job Description Position Summary We are seeking a detail-oriented Data Center Technician with a strong focus on structured cabling and cable pulling within mission-critical environments. This role is responsible for installing, routing, dressing, labeling, and testing copper and fiber optic cabling in a data center environment while maintaining strict adherence to safety and quality standards. Key Responsibilities Pull, route, and secure copper (Cat5e, Cat6, Cat6A) and fiber optic cables (single-mode and multi-mode) in overhead trays, under raised floors, and through conduits Install and terminate structured cabling systems, including patch panels, keystone jacks, and fiber enclosures Perform cable dressing, bundling, and Velcro management according to data center standards Label cables according to TIA/EIA and company labeling standards Test and troubleshoot copper and fiber cabling using certification testers and OTDR equipment Install cable tray systems, ladder racks, J-hooks, and support structures Maintain accurate documentation, cable maps, and as-built drawings Work within active data center environments without disrupting live equipment Follow all safety procedures including proper lifting techniques and PPE requirements Coordinate with network engineers, facilities teams, and project managers Required Qualifications 1-3+ years of experience in structured cabling or data center environments Experience pulling and dressing large cable bundles in commercial or data center settings Knowledge of copper and fiber standards (TIA/EIA, BICSI preferred) Ability to read blueprints, rack elevations, and cable schedules Comfortable working at heights (ladders/lifts) and in confined spaces Ability to lift up to 50 lbs and perform repetitive physical tasks Strong attention to detail and organization Powered by JazzHR L0hEbgzSpJ
09/28/2026
Full time
Job Description Job Description Position Summary We are seeking a detail-oriented Data Center Technician with a strong focus on structured cabling and cable pulling within mission-critical environments. This role is responsible for installing, routing, dressing, labeling, and testing copper and fiber optic cabling in a data center environment while maintaining strict adherence to safety and quality standards. Key Responsibilities Pull, route, and secure copper (Cat5e, Cat6, Cat6A) and fiber optic cables (single-mode and multi-mode) in overhead trays, under raised floors, and through conduits Install and terminate structured cabling systems, including patch panels, keystone jacks, and fiber enclosures Perform cable dressing, bundling, and Velcro management according to data center standards Label cables according to TIA/EIA and company labeling standards Test and troubleshoot copper and fiber cabling using certification testers and OTDR equipment Install cable tray systems, ladder racks, J-hooks, and support structures Maintain accurate documentation, cable maps, and as-built drawings Work within active data center environments without disrupting live equipment Follow all safety procedures including proper lifting techniques and PPE requirements Coordinate with network engineers, facilities teams, and project managers Required Qualifications 1-3+ years of experience in structured cabling or data center environments Experience pulling and dressing large cable bundles in commercial or data center settings Knowledge of copper and fiber standards (TIA/EIA, BICSI preferred) Ability to read blueprints, rack elevations, and cable schedules Comfortable working at heights (ladders/lifts) and in confined spaces Ability to lift up to 50 lbs and perform repetitive physical tasks Strong attention to detail and organization Powered by JazzHR L0hEbgzSpJ