Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
11/14/2026
Full time
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
11/14/2026
Full time
Job Description All for equipping teams to excel. As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop mobile The incumbent will support the following roles and responsibilities: Description Perform routine technical tasks in a simulator, laboratory, office, plant, or field environment. Receive training in the various phases of laboratory, office, plant, and field technical work. Learn and perform preventive maintenance activities on simulators and associated simulator systems. Assist in diagnosing, troubleshooting, and correcting issues on simulators and associated simulator systems. Utilize the maintenance management system to record, document, and track maintenance activities. Complete all assigned training and development activities. Perform pre-flight and post-flight checks on designated simulators. Conduct basic visual alignments. Execute automated Qualification Test Guide (QTG) procedures. Assist with simulator refurbishment projects and hardware modifications. Learn and comply with the organization's Quality Management System (QMS) requirements. Provide customer service support and respond to customer needs in a timely manner. Perform housekeeping activities necessary to maintain simulator readiness and cleanliness. Support logistics activities, including receiving parts, coordinating repairs, and conducting testing and validation. Complete administrative tasks as assigned. Provide operational support to the Technical Services team as required. Minimum Qualifications Associate degree (2-year technical degree) in a technical discipline, or 4 years of experience in an electronics, avionics, or related technical field. 0-2 years of relevant technical experience. Ability to work flexible schedules and adapt to changing shift requirements. Ability to interpret technical drawings, system prints, and schematics. Proficiency in using electronic test equipment, including oscilloscopes, multimeters, signal generators, and logic analyzers. Knowledge of analog and digital electronic theory. Computer literacy, including familiarity with PC hardware, software, and computer system architecture. Proficiency in soldering and circuit board repair techniques. Working knowledge of Microsoft Office applications. Ability to communicate effectively in English. Preferred Qualifications Experience supporting simulation, training, aviation, electronics, or technical equipment environments. Experience using computerized maintenance management systems (CMMS). Demonstrated troubleshooting and problem-solving skills in a technical environment. Experience performing preventative maintenance and equipment testin Physical Efforts: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time. Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles Occasionally, remain in stationary positions Constantly adjust or move objects up to 30 pounds Constantly communicating with others to exchange information Constantly perform repetitive motions involving wrists, hands, or fingers Benefits an environment where your initiatives will be recognized and valued the opportunity to travel internationally the opportunity to work on a variety of projects on a multidisciplinary team the opportunity to represent the organization at external conventions and conferences the possibility to work from home occasionally flexible schedules attractive employee benefits Pay rate: $24.62 /hr- $28.00/hr CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis. E-Verify As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster: About CAE At CAE, our mission is clear: to help make the world a safer place. For nearly 80 years, we've driven innovation in simulation, training, and mission readiness to support critical operations worldwide. By leveraging advanced technologies, we empower our customers to operate smarter, faster, and more sustainably. Join a purpose-driven organization where bold ideas are encouraged, collaboration drives progress, and your growth fuels our shared success. Position Type Regular Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, color, national origin, age, religion, sex, disability status, protected veteran status, or any other characteristic protected by federal, state or local laws. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at . Data Privacy Privacy Statement CAE As part of our process, we may use AI supported tools to help review applications, with human decision making at every step. CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted.
Prudent Technologies and Consulting, Inc.
Nashville, Tennessee
Job Description Role: Data Engineer - Real-Time & Cloud Platforms Location :- Nashville, TN ( Onsite from day 1 ) Duration: Long Term Job Summary As a Consulting Data Engineer, you will architect, build, and optimize the next generation of our real-time healthcare data platforms and event-driven architectures. You will play a foundational role in moving our clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, you will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. You will bridge the gap between complex electronic health records (EHR) and data consumer-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities • Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). • Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). • Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. • Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. • Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. • Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. • Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications Experience & Education • 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. • 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). • Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). True Streaming Focus • Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. • Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Healthcare-Specific Tech Stack • Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. • GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). • EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Cloud Ecosystem & Modern Tooling • Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). • Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). • Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). • DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform.
11/14/2026
Full time
Job Description Role: Data Engineer - Real-Time & Cloud Platforms Location :- Nashville, TN ( Onsite from day 1 ) Duration: Long Term Job Summary As a Consulting Data Engineer, you will architect, build, and optimize the next generation of our real-time healthcare data platforms and event-driven architectures. You will play a foundational role in moving our clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, you will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. You will bridge the gap between complex electronic health records (EHR) and data consumer-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities • Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). • Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). • Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. • Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. • Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. • Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. • Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications Experience & Education • 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. • 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). • Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). True Streaming Focus • Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. • Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Healthcare-Specific Tech Stack • Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. • GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). • EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Cloud Ecosystem & Modern Tooling • Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). • Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). • Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). • DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform.
Integrated Resources, Inc ( IRI )
Swiftwater, Pennsylvania
Job Description Function: Quality Systems / Continuous Improvement Focus: Formulation & Filling Manager Notes: Must Have: Bachelor's degree and 3-5 years of relevant experience Strong experience with deviations, Quality Systems, continuous improvement, and regulated GMP pharmaceutical or biotech manufacturing environments. Experience with eBR, Opstrakker, MES, or similar digital manufacturing systems. Experience with comparable Quality systems such as Qualipso/Veeva is acceptable. Nice to Have Experience/ Skills: Previous biotech and/or pharmaceutical manufacturing experience strongly preferred. Familiarity with OEE (Overall Equipment Effectiveness) and using performance metrics to identify equipment/process improvement opportunities. Background in formulation, filling, lyophilization (freeze-drying), and/or inspection is a plus. Position Summary The Quality Systems / Continuous Improvement Contractor will provide dedicated support to pharmaceutical manufacturing operations, with a primary focus on Formulation and Filling. This position will partner with Quality, Operations, Engineering, MSAT, Sterility Assurance, and other cross-functional teams to drive CAPA, Change Control, quality investigations, root cause analysis, and continuous improvement initiatives while maintaining compliance with cGMP and regulatory requirements. Key Responsibilities Serve as the CAPA and Change Control point of contact supporting Formulation and Filling improvement initiatives. Independently manage CAPA and Change Control actions, ensuring accurate documentation and timely closure. Lead quality investigations, troubleshooting, root cause analysis, product impact assessments, and corrective/preventive actions. Partner with SMEs and cross-functional stakeholders to resolve manufacturing and quality issues. Provide technical support for component qualification, Overall Equipment Effectiveness (OEE), electronic Batch Records (eBR), Opstrakker, and factory improvement initiatives. Support continuous improvement efforts utilizing Lean Manufacturing, Six Sigma, and +QDCI Visual Management principles. Monitor and communicate key performance metrics and identify opportunities for process improvement. Author and maintain high-quality protocols, technical reports, investigations, CAPAs, and Change Controls. Ensure compliance with current Good Manufacturing Practices (cGMP), Good Documentation Practices (GDP), and applicable regulatory requirements. Support regulatory inspections and audits as required. Required Qualifications Minimum Education: Bachelor's degree. Experience: Minimum 3-5 years of relevant experience in pharmaceutical manufacturing, Quality Systems, Continuous Improvement, or a related regulated environment. Strong knowledge of cGMP requirements and pharmaceutical manufacturing operations. Experience with formulation, filling, lyophilization, and/or inspection processes. Experience managing CAPAs, Change Controls, quality investigations, and root cause analysis. Knowledge of Lean Manufacturing and Six Sigma methodologies. Strong technical writing, project management, problem-solving, and cross-functional communication skills. Proficiency in Microsoft Excel, Word, and PowerPoint. Experience with iShift, Qualipso, eBR, and Opstrakker preferred.
11/14/2026
Full time
Job Description Function: Quality Systems / Continuous Improvement Focus: Formulation & Filling Manager Notes: Must Have: Bachelor's degree and 3-5 years of relevant experience Strong experience with deviations, Quality Systems, continuous improvement, and regulated GMP pharmaceutical or biotech manufacturing environments. Experience with eBR, Opstrakker, MES, or similar digital manufacturing systems. Experience with comparable Quality systems such as Qualipso/Veeva is acceptable. Nice to Have Experience/ Skills: Previous biotech and/or pharmaceutical manufacturing experience strongly preferred. Familiarity with OEE (Overall Equipment Effectiveness) and using performance metrics to identify equipment/process improvement opportunities. Background in formulation, filling, lyophilization (freeze-drying), and/or inspection is a plus. Position Summary The Quality Systems / Continuous Improvement Contractor will provide dedicated support to pharmaceutical manufacturing operations, with a primary focus on Formulation and Filling. This position will partner with Quality, Operations, Engineering, MSAT, Sterility Assurance, and other cross-functional teams to drive CAPA, Change Control, quality investigations, root cause analysis, and continuous improvement initiatives while maintaining compliance with cGMP and regulatory requirements. Key Responsibilities Serve as the CAPA and Change Control point of contact supporting Formulation and Filling improvement initiatives. Independently manage CAPA and Change Control actions, ensuring accurate documentation and timely closure. Lead quality investigations, troubleshooting, root cause analysis, product impact assessments, and corrective/preventive actions. Partner with SMEs and cross-functional stakeholders to resolve manufacturing and quality issues. Provide technical support for component qualification, Overall Equipment Effectiveness (OEE), electronic Batch Records (eBR), Opstrakker, and factory improvement initiatives. Support continuous improvement efforts utilizing Lean Manufacturing, Six Sigma, and +QDCI Visual Management principles. Monitor and communicate key performance metrics and identify opportunities for process improvement. Author and maintain high-quality protocols, technical reports, investigations, CAPAs, and Change Controls. Ensure compliance with current Good Manufacturing Practices (cGMP), Good Documentation Practices (GDP), and applicable regulatory requirements. Support regulatory inspections and audits as required. Required Qualifications Minimum Education: Bachelor's degree. Experience: Minimum 3-5 years of relevant experience in pharmaceutical manufacturing, Quality Systems, Continuous Improvement, or a related regulated environment. Strong knowledge of cGMP requirements and pharmaceutical manufacturing operations. Experience with formulation, filling, lyophilization, and/or inspection processes. Experience managing CAPAs, Change Controls, quality investigations, and root cause analysis. Knowledge of Lean Manufacturing and Six Sigma methodologies. Strong technical writing, project management, problem-solving, and cross-functional communication skills. Proficiency in Microsoft Excel, Word, and PowerPoint. Experience with iShift, Qualipso, eBR, and Opstrakker preferred.
Job Description Senior Hardware Engineer Location - Tarrytown, NY. - Onsite Contract/Full time Must-Have Skills: - PCB Design / Analog /Mix Signal / Digital. 8-15 years of Hardware design experience. Analog, Digital & Mixed-Signal Design, Experience with signal integrity techniques and layout constraints. High-Speed PCB Design (Ethernet, USB, SPI, I2C, CAN) PCB Design, DFM, DFT, SI/PI Analysis Key Responsibilities Hands on PCB hardware design, new product development activities. Perform schematic reviews, component selection, PCB design reviews, and hardware validation. Design and develop electrical/electronic hardware and subsystem characterization/test equipment. Develop new concepts, including component selection and block diagrams . Create and maintain wiring diagrams, schematics, 2D/3D models and BOMs . Design/build electronics and manual or semi-automated test systems . Integrate electrical hardware with software/firmware and troubleshoot complex subsystem-level issues. Modify and review existing designs and execute engineering changes. Support PCBA, assemblies, prototypes, jigs and test fixtures . Perform design verification/validation and participate in reliability activities, including RCA/8D, FMEA, failure analysis and design reviews .
11/14/2026
Full time
Job Description Senior Hardware Engineer Location - Tarrytown, NY. - Onsite Contract/Full time Must-Have Skills: - PCB Design / Analog /Mix Signal / Digital. 8-15 years of Hardware design experience. Analog, Digital & Mixed-Signal Design, Experience with signal integrity techniques and layout constraints. High-Speed PCB Design (Ethernet, USB, SPI, I2C, CAN) PCB Design, DFM, DFT, SI/PI Analysis Key Responsibilities Hands on PCB hardware design, new product development activities. Perform schematic reviews, component selection, PCB design reviews, and hardware validation. Design and develop electrical/electronic hardware and subsystem characterization/test equipment. Develop new concepts, including component selection and block diagrams . Create and maintain wiring diagrams, schematics, 2D/3D models and BOMs . Design/build electronics and manual or semi-automated test systems . Integrate electrical hardware with software/firmware and troubleshoot complex subsystem-level issues. Modify and review existing designs and execute engineering changes. Support PCBA, assemblies, prototypes, jigs and test fixtures . Perform design verification/validation and participate in reliability activities, including RCA/8D, FMEA, failure analysis and design reviews .
Job Description The Business Analyst is responsible for supporting, enhancing, and optimizing Microsoft Dynamics 365 Finance and Operations across the Cinch / Bel Fuse multi-site, multi-division environment. This role serves as the bridge between business stakeholders and technical teams - both onshore and offshore - translating business requirements into functional solutions across the order-to-cash and procure-to-pay lifecycles. Working as a functional generalist, the Business Analyst will facilitate requirements gathering with business users, coordinate configuration and development with the Dynamics team, support testing and user adoption, and drive accountability across all project phases. Are You Looking To: Serve as the primary liaison between business departments and Microsoft Dynamics 365 Finance and Operations, ensuring system capabilities align with business objectives. Utilize 2+ years of hands-on experience within the Microsoft Dynamics 365 ecosystem to support, enhance, and optimize ERP operations, ideally within a manufacturing environment. Configure and personalize Dynamics 365 Finance and Operations, and leverage the Power Platform (Power Apps, Power Automate) where appropriate, to streamline workflows, improve data visualization, and enhance user experience. Manage reporting tasks within Dynamics 365, including standard and ad-hoc reports, financial reporting (Management Reporter), and Power BI dashboards, to deliver actionable insights to the business. Oversee Electronic Data Interchange (EDI) processes, with emphasis on managing and troubleshooting transaction sets like 810 (Invoice), 850 (Purchase Order), and 855 (Order Acknowledgment). Are You Ready To: Build and maintain form personalizations, workflows, and configurations within Dynamics 365 Finance and Operations, ensuring alignment with business requirements and system standards. Monitor business systems to assure maximum up-time. Participate in ERP projects, including new module rollouts, implementations, and platform updates, and ensure thorough testing and user adoption during major upgrades and monthly release cycles. Collaborate with the offshore India team to manage development projects, coordinate testing efforts, and support system enhancements. Facilitate user acceptance testing (UAT) with business stakeholders, ensuring new implementations or upgrades meet functional and technical requirements. Document processes, configurations, and best practices to build knowledge resources for ongoing system support and future enhancements. Assume other projects and responsibilities from time to time as directed. Regular and predictable attendance is presumed to be an essential function of all employment. Establish and maintain a positive working relationship within assigned teams and with all applicable departments, customers, and vendors. Seek mutual agreement on problems involving coordination. What You'll Need: Bachelor's Degree (Business Management, Engineering, Accounting, Computer Science, Manufacturing Systems, etc.), advanced degree desired. Minimum 2+ years' experience working within the Microsoft Dynamics 365 ecosystem, with broader business systems or ERP experience preferred. Prior work experience in a manufacturing environment required. Must be a US Citizen or Permanent Resident. What You'll Get: Compensation range of $85,000 to $120,000. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Participation in the annual bonus program 401K and company match Medical, Dental, Vision Health Savings Account (HSA) Flexible Spending Account (FSA) Company Life Insurance Short & Long-term disability Paid Time Off (e.g., Vacation Benefits, Company Holidays, Sick Leave Benefits, Personal Days) Pet Insurance Tuition Reimbursement To review a full listing of our benefits, please refer to the 2026 Bel Fuse Benefits Summary and Paid Time Off Benefits, or by visiting the Bel Fuse Careers page. Work Opportunity Bel will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Bel is an Equal Opportunity employer.
11/14/2026
Full time
Job Description The Business Analyst is responsible for supporting, enhancing, and optimizing Microsoft Dynamics 365 Finance and Operations across the Cinch / Bel Fuse multi-site, multi-division environment. This role serves as the bridge between business stakeholders and technical teams - both onshore and offshore - translating business requirements into functional solutions across the order-to-cash and procure-to-pay lifecycles. Working as a functional generalist, the Business Analyst will facilitate requirements gathering with business users, coordinate configuration and development with the Dynamics team, support testing and user adoption, and drive accountability across all project phases. Are You Looking To: Serve as the primary liaison between business departments and Microsoft Dynamics 365 Finance and Operations, ensuring system capabilities align with business objectives. Utilize 2+ years of hands-on experience within the Microsoft Dynamics 365 ecosystem to support, enhance, and optimize ERP operations, ideally within a manufacturing environment. Configure and personalize Dynamics 365 Finance and Operations, and leverage the Power Platform (Power Apps, Power Automate) where appropriate, to streamline workflows, improve data visualization, and enhance user experience. Manage reporting tasks within Dynamics 365, including standard and ad-hoc reports, financial reporting (Management Reporter), and Power BI dashboards, to deliver actionable insights to the business. Oversee Electronic Data Interchange (EDI) processes, with emphasis on managing and troubleshooting transaction sets like 810 (Invoice), 850 (Purchase Order), and 855 (Order Acknowledgment). Are You Ready To: Build and maintain form personalizations, workflows, and configurations within Dynamics 365 Finance and Operations, ensuring alignment with business requirements and system standards. Monitor business systems to assure maximum up-time. Participate in ERP projects, including new module rollouts, implementations, and platform updates, and ensure thorough testing and user adoption during major upgrades and monthly release cycles. Collaborate with the offshore India team to manage development projects, coordinate testing efforts, and support system enhancements. Facilitate user acceptance testing (UAT) with business stakeholders, ensuring new implementations or upgrades meet functional and technical requirements. Document processes, configurations, and best practices to build knowledge resources for ongoing system support and future enhancements. Assume other projects and responsibilities from time to time as directed. Regular and predictable attendance is presumed to be an essential function of all employment. Establish and maintain a positive working relationship within assigned teams and with all applicable departments, customers, and vendors. Seek mutual agreement on problems involving coordination. What You'll Need: Bachelor's Degree (Business Management, Engineering, Accounting, Computer Science, Manufacturing Systems, etc.), advanced degree desired. Minimum 2+ years' experience working within the Microsoft Dynamics 365 ecosystem, with broader business systems or ERP experience preferred. Prior work experience in a manufacturing environment required. Must be a US Citizen or Permanent Resident. What You'll Get: Compensation range of $85,000 to $120,000. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Participation in the annual bonus program 401K and company match Medical, Dental, Vision Health Savings Account (HSA) Flexible Spending Account (FSA) Company Life Insurance Short & Long-term disability Paid Time Off (e.g., Vacation Benefits, Company Holidays, Sick Leave Benefits, Personal Days) Pet Insurance Tuition Reimbursement To review a full listing of our benefits, please refer to the 2026 Bel Fuse Benefits Summary and Paid Time Off Benefits, or by visiting the Bel Fuse Careers page. Work Opportunity Bel will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Bel is an Equal Opportunity employer.
Job Description The Business Analyst is responsible for supporting, enhancing, and optimizing Microsoft Dynamics 365 Finance and Operations across the Cinch / Bel Fuse multi-site, multi-division environment. This role serves as the bridge between business stakeholders and technical teams - both onshore and offshore - translating business requirements into functional solutions across the order-to-cash and procure-to-pay lifecycles. Working as a functional generalist, the Business Analyst will facilitate requirements gathering with business users, coordinate configuration and development with the Dynamics team, support testing and user adoption, and drive accountability across all project phases. Are You Looking To: Serve as the primary liaison between business departments and Microsoft Dynamics 365 Finance and Operations, ensuring system capabilities align with business objectives. Utilize 2+ years of hands-on experience within the Microsoft Dynamics 365 ecosystem to support, enhance, and optimize ERP operations, ideally within a manufacturing environment. Configure and personalize Dynamics 365 Finance and Operations, and leverage the Power Platform (Power Apps, Power Automate) where appropriate, to streamline workflows, improve data visualization, and enhance user experience. Manage reporting tasks within Dynamics 365, including standard and ad-hoc reports, financial reporting (Management Reporter), and Power BI dashboards, to deliver actionable insights to the business. Oversee Electronic Data Interchange (EDI) processes, with emphasis on managing and troubleshooting transaction sets like 810 (Invoice), 850 (Purchase Order), and 855 (Order Acknowledgment). Are You Ready To: Build and maintain form personalizations, workflows, and configurations within Dynamics 365 Finance and Operations, ensuring alignment with business requirements and system standards. Monitor business systems to assure maximum up-time. Participate in ERP projects, including new module rollouts, implementations, and platform updates, and ensure thorough testing and user adoption during major upgrades and monthly release cycles. Collaborate with the offshore India team to manage development projects, coordinate testing efforts, and support system enhancements. Facilitate user acceptance testing (UAT) with business stakeholders, ensuring new implementations or upgrades meet functional and technical requirements. Document processes, configurations, and best practices to build knowledge resources for ongoing system support and future enhancements. Assume other projects and responsibilities from time to time as directed. Regular and predictable attendance is presumed to be an essential function of all employment. Establish and maintain a positive working relationship within assigned teams and with all applicable departments, customers, and vendors. Seek mutual agreement on problems involving coordination. What You'll Need: Bachelor's Degree (Business Management, Engineering, Accounting, Computer Science, Manufacturing Systems, etc.), advanced degree desired. Minimum 2+ years' experience working within the Microsoft Dynamics 365 ecosystem, with broader business systems or ERP experience preferred. Prior work experience in a manufacturing environment required. Must be a US Citizen or Permanent Resident. What You'll Get: Compensation range of $85,000 to $120,000. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Participation in the annual bonus program 401K and company match Medical, Dental, Vision Health Savings Account (HSA) Flexible Spending Account (FSA) Company Life Insurance Short & Long-term disability Paid Time Off (e.g., Vacation Benefits, Company Holidays, Sick Leave Benefits, Personal Days) Pet Insurance Tuition Reimbursement To review a full listing of our benefits, please refer to the 2026 Bel Fuse Benefits Summary and Paid Time Off Benefits, or by visiting the Bel Fuse Careers page. Work Opportunity Bel will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Bel is an Equal Opportunity employer.
11/14/2026
Full time
Job Description The Business Analyst is responsible for supporting, enhancing, and optimizing Microsoft Dynamics 365 Finance and Operations across the Cinch / Bel Fuse multi-site, multi-division environment. This role serves as the bridge between business stakeholders and technical teams - both onshore and offshore - translating business requirements into functional solutions across the order-to-cash and procure-to-pay lifecycles. Working as a functional generalist, the Business Analyst will facilitate requirements gathering with business users, coordinate configuration and development with the Dynamics team, support testing and user adoption, and drive accountability across all project phases. Are You Looking To: Serve as the primary liaison between business departments and Microsoft Dynamics 365 Finance and Operations, ensuring system capabilities align with business objectives. Utilize 2+ years of hands-on experience within the Microsoft Dynamics 365 ecosystem to support, enhance, and optimize ERP operations, ideally within a manufacturing environment. Configure and personalize Dynamics 365 Finance and Operations, and leverage the Power Platform (Power Apps, Power Automate) where appropriate, to streamline workflows, improve data visualization, and enhance user experience. Manage reporting tasks within Dynamics 365, including standard and ad-hoc reports, financial reporting (Management Reporter), and Power BI dashboards, to deliver actionable insights to the business. Oversee Electronic Data Interchange (EDI) processes, with emphasis on managing and troubleshooting transaction sets like 810 (Invoice), 850 (Purchase Order), and 855 (Order Acknowledgment). Are You Ready To: Build and maintain form personalizations, workflows, and configurations within Dynamics 365 Finance and Operations, ensuring alignment with business requirements and system standards. Monitor business systems to assure maximum up-time. Participate in ERP projects, including new module rollouts, implementations, and platform updates, and ensure thorough testing and user adoption during major upgrades and monthly release cycles. Collaborate with the offshore India team to manage development projects, coordinate testing efforts, and support system enhancements. Facilitate user acceptance testing (UAT) with business stakeholders, ensuring new implementations or upgrades meet functional and technical requirements. Document processes, configurations, and best practices to build knowledge resources for ongoing system support and future enhancements. Assume other projects and responsibilities from time to time as directed. Regular and predictable attendance is presumed to be an essential function of all employment. Establish and maintain a positive working relationship within assigned teams and with all applicable departments, customers, and vendors. Seek mutual agreement on problems involving coordination. What You'll Need: Bachelor's Degree (Business Management, Engineering, Accounting, Computer Science, Manufacturing Systems, etc.), advanced degree desired. Minimum 2+ years' experience working within the Microsoft Dynamics 365 ecosystem, with broader business systems or ERP experience preferred. Prior work experience in a manufacturing environment required. Must be a US Citizen or Permanent Resident. What You'll Get: Compensation range of $85,000 to $120,000. The compensation offered will take into account internal equity and may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience among other factors Participation in the annual bonus program 401K and company match Medical, Dental, Vision Health Savings Account (HSA) Flexible Spending Account (FSA) Company Life Insurance Short & Long-term disability Paid Time Off (e.g., Vacation Benefits, Company Holidays, Sick Leave Benefits, Personal Days) Pet Insurance Tuition Reimbursement To review a full listing of our benefits, please refer to the 2026 Bel Fuse Benefits Summary and Paid Time Off Benefits, or by visiting the Bel Fuse Careers page. Work Opportunity Bel will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Bel is an Equal Opportunity employer.
Project Engineer - Turnkey Automation - Johnson City, TN Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery_ . REMOTE WORK FROM HOME AVAILABLE Join a company specializing in developing custom automation solutions for customers making electronic devices, pharmaceuticals, and medical devices. Lead projects from inception through conclusion and oversee all aspects from project planning to commissioning. Objectives: • Take charge of projects and oversee strategy development, scheduling, budget planning, pricing, timelines, problem resolution, VOC engagement, resource planning, implementation, and post-completion support. • Manage customer and regulatory agency interactions and act as the interface between company executive management and external customers. • Keep project on schedule and develop corrective and preventive action plans to resolve conflicts, quality issues, and cost overruns. Potential to hire at a Senior Project Manager level depending on experience. Competitive salary, full benefits, flexible spending account, 401(k) with company match, short and long-term disability coverage, paid holidays, vacations, personal days, and more! Join a company that has a history of success in the industry and has a team of career oriented professionals who believe in what they do. For details contact Nicholas Owens at: ext 240 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
11/14/2026
Full time
Project Engineer - Turnkey Automation - Johnson City, TN Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery_ . REMOTE WORK FROM HOME AVAILABLE Join a company specializing in developing custom automation solutions for customers making electronic devices, pharmaceuticals, and medical devices. Lead projects from inception through conclusion and oversee all aspects from project planning to commissioning. Objectives: • Take charge of projects and oversee strategy development, scheduling, budget planning, pricing, timelines, problem resolution, VOC engagement, resource planning, implementation, and post-completion support. • Manage customer and regulatory agency interactions and act as the interface between company executive management and external customers. • Keep project on schedule and develop corrective and preventive action plans to resolve conflicts, quality issues, and cost overruns. Potential to hire at a Senior Project Manager level depending on experience. Competitive salary, full benefits, flexible spending account, 401(k) with company match, short and long-term disability coverage, paid holidays, vacations, personal days, and more! Join a company that has a history of success in the industry and has a team of career oriented professionals who believe in what they do. For details contact Nicholas Owens at: ext 240 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
Pay Range: $50.00hr - $55.00hr Job Overview: As a Consulting Data Engineer, the successful candidate will architect, build, and optimize the next generation of real-time healthcare data platforms and event-driven architectures. The candidate will play a foundational role in moving clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, the candidate will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. The candidate will bridge the gap between complex electronic health records (EHR) and data consumers-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities: Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications: 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $50.00hr - $55.00hr Job Overview: As a Consulting Data Engineer, the successful candidate will architect, build, and optimize the next generation of real-time healthcare data platforms and event-driven architectures. The candidate will play a foundational role in moving clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, the candidate will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. The candidate will bridge the gap between complex electronic health records (EHR) and data consumers-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities: Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications: 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Job Description About Company: Trilyon, Inc. is a trusted partner to some of the world's leading organizations-including Fortune 500 companies-delivering innovative technology consulting and customized workforce solutions to address complex business challenges. With a strong presence across North America, LATAM, EMEA, and APAC, we combine global reach with deep local expertise to deliver impactful results. Our agile and scalable approach enables clients to adapt swiftly in today's fast-changing business landscape. Job details: Position: Manufacturing Engineer (I) Duration: 4+ Months Location: Clarksville, TN Job Type: Contract Payrate - $57/hourly on w2 Overall Responsibilities: Job Description Project Overview: The goal of this team is reduce / minimize damage and the impact of damage for Data Center hardware. This includes inspection, testing, and repair of critical components to ensure cutting edge Data Center hardware is reliable and maintained in the Data Center environment. Overall Responsibilities: This role is a quality assurance position with primary focus to monitor and reduce damage to data center hardware parts. Assist the site leadership in efforts to reduce damage at each DC. This would involve spot checks of different process staging areas for proper handling, packaging and storage of parts. Assist in execution of the damaged parts process at the datacenter. This is the process for ensuring damaged parts are verified as damaged and quarantined and not mixed with good products. Identify and escalate issues affecting part damage. Excursion Support - Provide support of key field campaigns and failure investigations. Top Daily Responsibilities: Perform Special Damage Inspections/Repairs of Critical Parts Perform Printed Circuit Board Assembly (PCBA) Quick Testing for re-inventory boards. 100 boards per week Perform damage verification inspection for parts reported damaged by other onsite personnel. This is needed to ensure parts are truly damaged. This inspection would involve up to 100 parts per week Repair of Damaged Parts Cleaning of thermal Paste for CPUs Straightening bent connectors Replace missing parts - CPU carrier frames, dust covers etc. Periodic auditing of handling and ESD processes and packing used at different touch points at each Data Center Mandatory Skills/Qualifications: Education: Bachelor's Degree or equivalent experience in technical field 3 years experience in technical field General knowledge of electronic parts and components used in Data Center hardware. (Examples, Motherboards, DIMMs, Hard Drives, network cards, Optic) 1st Level Failure Analysis (FA) ability for electronic parts Familiarity with typical mechanical defects of electronic components and hardware Ability to sit for extended periods (several hours at a time) doing detailed inspection of electronic parts and components Familiarity with simple inspection equipment such as stereo microscopes and ring lights Ability to use a PC to record / report data Ability to write process instructions/ SOPs People Skills to work with and influence others Strength: Medium to heavy materials handling required (e.g. Lifting, pushing/pulling etc.) Non-Essential Skills/Qualifications: Quality Assurance background in the electronics industry Background in troubleshooting / repair of server / storage and networking products Knowledge of spreadsheets and databases Thanks & Regards Mohammad Fahad Khan Recruitment Lead Email: LinkedIn Link fahad-khan Company website:
11/14/2026
Full time
Job Description About Company: Trilyon, Inc. is a trusted partner to some of the world's leading organizations-including Fortune 500 companies-delivering innovative technology consulting and customized workforce solutions to address complex business challenges. With a strong presence across North America, LATAM, EMEA, and APAC, we combine global reach with deep local expertise to deliver impactful results. Our agile and scalable approach enables clients to adapt swiftly in today's fast-changing business landscape. Job details: Position: Manufacturing Engineer (I) Duration: 4+ Months Location: Clarksville, TN Job Type: Contract Payrate - $57/hourly on w2 Overall Responsibilities: Job Description Project Overview: The goal of this team is reduce / minimize damage and the impact of damage for Data Center hardware. This includes inspection, testing, and repair of critical components to ensure cutting edge Data Center hardware is reliable and maintained in the Data Center environment. Overall Responsibilities: This role is a quality assurance position with primary focus to monitor and reduce damage to data center hardware parts. Assist the site leadership in efforts to reduce damage at each DC. This would involve spot checks of different process staging areas for proper handling, packaging and storage of parts. Assist in execution of the damaged parts process at the datacenter. This is the process for ensuring damaged parts are verified as damaged and quarantined and not mixed with good products. Identify and escalate issues affecting part damage. Excursion Support - Provide support of key field campaigns and failure investigations. Top Daily Responsibilities: Perform Special Damage Inspections/Repairs of Critical Parts Perform Printed Circuit Board Assembly (PCBA) Quick Testing for re-inventory boards. 100 boards per week Perform damage verification inspection for parts reported damaged by other onsite personnel. This is needed to ensure parts are truly damaged. This inspection would involve up to 100 parts per week Repair of Damaged Parts Cleaning of thermal Paste for CPUs Straightening bent connectors Replace missing parts - CPU carrier frames, dust covers etc. Periodic auditing of handling and ESD processes and packing used at different touch points at each Data Center Mandatory Skills/Qualifications: Education: Bachelor's Degree or equivalent experience in technical field 3 years experience in technical field General knowledge of electronic parts and components used in Data Center hardware. (Examples, Motherboards, DIMMs, Hard Drives, network cards, Optic) 1st Level Failure Analysis (FA) ability for electronic parts Familiarity with typical mechanical defects of electronic components and hardware Ability to sit for extended periods (several hours at a time) doing detailed inspection of electronic parts and components Familiarity with simple inspection equipment such as stereo microscopes and ring lights Ability to use a PC to record / report data Ability to write process instructions/ SOPs People Skills to work with and influence others Strength: Medium to heavy materials handling required (e.g. Lifting, pushing/pulling etc.) Non-Essential Skills/Qualifications: Quality Assurance background in the electronics industry Background in troubleshooting / repair of server / storage and networking products Knowledge of spreadsheets and databases Thanks & Regards Mohammad Fahad Khan Recruitment Lead Email: LinkedIn Link fahad-khan Company website:
Job Description South Florida. On-site and field-based, working on boats, at the dock and on the water. Travel regularly for installations, demos and events. 75k-100k depending on experience, plus full benefits. Note: a genuine marine or marine electronics background is a hard requirement. Applications without demonstrable hands-on experience working on vessels will not be considered. SEA.AI builds AI and machine vision systems that give crews an accurate picture of what's around their vessel, deployed on commercial, defence and recreational vessels worldwide. We're expanding our Field Service and Application Engineering team in South Florida. You'll be the technical backbone of our sales activity in the Americas and own the technical delivery of our systems, from demos and sea trials to installation, commissioning and support. You'll sit within our Service department and work closely with Sales, Quality and Product Management. ' Install, commission and troubleshoot our AI machine vision systems onboard commercial, defence and recreational vessels, including elevated and masthead mounting Plan, set up and run live demonstrations, sea trials and customer evaluations, on the water and at trade shows Act as the technical point of contact for the sales team and customers, scoping configurations and supporting pre-sales and post-sales Support integration with onboard equipment, working with shipyards, integrators and partners Provide remote and on-site technical support Manage a pool of demo equipment in the Americas, including logistics, stock and maintenance Feed field issues and product requirements back to R&D, Product Management and Quality Represent SEA.AI at trade shows and industry events (Miami International Boat Show, International WorkBoat Show), staffing the booth and running live demos Hands-on experience working on boats and vessels. This is a hard requirement. We're looking for someone from a marine background (marine electronics installer, shipyard technician, marine electrician, Navy or Coast Guard electronics technician, or similar) Practical experience installing or servicing marine electronics (radar, AIS, ECDIS, VHF, EO/IR cameras, or similar) Comfortable running on-water and trade-show demos and presenting to technical and operational audiences Comfortable working aboard vessels at the dock and underway, and with elevated or masthead installations Working knowledge of marine electrical systems (AC and DC) and marine networking (NMEA, Ethernet) Technical education in electronics, mechatronics, IT or a related field, or equivalent hands-on marine experience Solid hardware, networking and software troubleshooting skills Strong customer-facing and presentation skills Well organized, able to work independently and proactively Willingness to travel frequently Must be legally authorized to work in the United States NMEA 2000 / NMEA 0183 experience, or NMEA installer certification ABYC certification or equivalent marine credentials Experience supporting sales (technical proposals, tender responses, trade-show booths, demos) Familiarity with EO/IR camera systems and embedded hardware Basic IP networking knowledge (IP cameras, switches, routers) Project coordination experience Interest in AI-based technologies Military, Coast Guard or defence-industry background ? 75k-105k depending on experience, skills and qualifications Medical insurance with 100% employer contribution, 20 days PTO, 401(k) with 4% match Work with cutting-edge maritime camera and AI technology Direct impact on customer success and product reliability A team of around 75 across five countries, small enough that what you do here visibly changes the company Travel to our offices in Austria, Germany, France and Portugal, and to customers worldwide
11/14/2026
Full time
Job Description South Florida. On-site and field-based, working on boats, at the dock and on the water. Travel regularly for installations, demos and events. 75k-100k depending on experience, plus full benefits. Note: a genuine marine or marine electronics background is a hard requirement. Applications without demonstrable hands-on experience working on vessels will not be considered. SEA.AI builds AI and machine vision systems that give crews an accurate picture of what's around their vessel, deployed on commercial, defence and recreational vessels worldwide. We're expanding our Field Service and Application Engineering team in South Florida. You'll be the technical backbone of our sales activity in the Americas and own the technical delivery of our systems, from demos and sea trials to installation, commissioning and support. You'll sit within our Service department and work closely with Sales, Quality and Product Management. ' Install, commission and troubleshoot our AI machine vision systems onboard commercial, defence and recreational vessels, including elevated and masthead mounting Plan, set up and run live demonstrations, sea trials and customer evaluations, on the water and at trade shows Act as the technical point of contact for the sales team and customers, scoping configurations and supporting pre-sales and post-sales Support integration with onboard equipment, working with shipyards, integrators and partners Provide remote and on-site technical support Manage a pool of demo equipment in the Americas, including logistics, stock and maintenance Feed field issues and product requirements back to R&D, Product Management and Quality Represent SEA.AI at trade shows and industry events (Miami International Boat Show, International WorkBoat Show), staffing the booth and running live demos Hands-on experience working on boats and vessels. This is a hard requirement. We're looking for someone from a marine background (marine electronics installer, shipyard technician, marine electrician, Navy or Coast Guard electronics technician, or similar) Practical experience installing or servicing marine electronics (radar, AIS, ECDIS, VHF, EO/IR cameras, or similar) Comfortable running on-water and trade-show demos and presenting to technical and operational audiences Comfortable working aboard vessels at the dock and underway, and with elevated or masthead installations Working knowledge of marine electrical systems (AC and DC) and marine networking (NMEA, Ethernet) Technical education in electronics, mechatronics, IT or a related field, or equivalent hands-on marine experience Solid hardware, networking and software troubleshooting skills Strong customer-facing and presentation skills Well organized, able to work independently and proactively Willingness to travel frequently Must be legally authorized to work in the United States NMEA 2000 / NMEA 0183 experience, or NMEA installer certification ABYC certification or equivalent marine credentials Experience supporting sales (technical proposals, tender responses, trade-show booths, demos) Familiarity with EO/IR camera systems and embedded hardware Basic IP networking knowledge (IP cameras, switches, routers) Project coordination experience Interest in AI-based technologies Military, Coast Guard or defence-industry background ? 75k-105k depending on experience, skills and qualifications Medical insurance with 100% employer contribution, 20 days PTO, 401(k) with 4% match Work with cutting-edge maritime camera and AI technology Direct impact on customer success and product reliability A team of around 75 across five countries, small enough that what you do here visibly changes the company Travel to our offices in Austria, Germany, France and Portugal, and to customers worldwide
Job Description Design firmware that makes its way into the lighting of high-performance machines - the kind crafted by Ferrari, Lamborghini, and Bugatti. Job Summary We're looking for an Embedded Firmware Engineer II who can take full ownership of firmware development across the entire product lifecycle. You will architect, code, test, and refine the firmware that powers our industry-leading lighting technologies. From concept through production launch and ongoing support, you will help shape the embedded intelligence behind every product we deliver. Job Responsibilities: Explore Develop innovative, robust embedded firmware solutions independently Lead development activities for one or more projects from concept to end-of-life Design and implement production-level and R&D software solutions Write high-performance embedded C code for microcontroller-based systems Use Simulink to design, simulate, and test embedded applications Innovate Define and enforce software development standards and best practices Support production teams on firmware-related issues and electronic component decisions Interpret schematics and understand hardware-software interactions Implement and optimize CAN communication protocols based on product requirements Drive adoption of automated Model-Based Software Development (MBSD) workflows Perform Develop end-of-line testing mechanisms and manufacturing support software Build C++ or Python PC-based applications and automation scripts Qualifications Bachelor's degree in Computer Science, Electrical Engineering, or Computer Engineering 4+ years of embedded firmware development experience Strong proficiency in C programming and embedded systems Experience with microcontrollers, CAN, UART, and industry communication protocols Highly preferred experience with Simulink, MBSD, FreeRTOS, and/or embedded cybersecurity (HSMs, certificate chain of trust, etc.) What We Offer Competitive compensation 401(k) with company match PTO, Sick/Personal time, and 11 paid holidays Profit-sharing plan Tuition reimbursement & scholarship opportunities Professional development & advancement paths Casual, collaborative work environment
11/14/2026
Full time
Job Description Design firmware that makes its way into the lighting of high-performance machines - the kind crafted by Ferrari, Lamborghini, and Bugatti. Job Summary We're looking for an Embedded Firmware Engineer II who can take full ownership of firmware development across the entire product lifecycle. You will architect, code, test, and refine the firmware that powers our industry-leading lighting technologies. From concept through production launch and ongoing support, you will help shape the embedded intelligence behind every product we deliver. Job Responsibilities: Explore Develop innovative, robust embedded firmware solutions independently Lead development activities for one or more projects from concept to end-of-life Design and implement production-level and R&D software solutions Write high-performance embedded C code for microcontroller-based systems Use Simulink to design, simulate, and test embedded applications Innovate Define and enforce software development standards and best practices Support production teams on firmware-related issues and electronic component decisions Interpret schematics and understand hardware-software interactions Implement and optimize CAN communication protocols based on product requirements Drive adoption of automated Model-Based Software Development (MBSD) workflows Perform Develop end-of-line testing mechanisms and manufacturing support software Build C++ or Python PC-based applications and automation scripts Qualifications Bachelor's degree in Computer Science, Electrical Engineering, or Computer Engineering 4+ years of embedded firmware development experience Strong proficiency in C programming and embedded systems Experience with microcontrollers, CAN, UART, and industry communication protocols Highly preferred experience with Simulink, MBSD, FreeRTOS, and/or embedded cybersecurity (HSMs, certificate chain of trust, etc.) What We Offer Competitive compensation 401(k) with company match PTO, Sick/Personal time, and 11 paid holidays Profit-sharing plan Tuition reimbursement & scholarship opportunities Professional development & advancement paths Casual, collaborative work environment
SUMMARY We are seeking a highly motivated MES Analyst with experience in food manufacturing and the Ignition platform or similar MES to support, enhance, and optimize manufacturing execution systems across production operations. This role will serve as a key technical resource responsible for MES configuration, data integration, production reporting, and continuous improvement initiatives within a regulated food manufacturing environment. The ideal candidate combines manufacturing systems expertise with strong operational knowledge of food production processes, traceability requirements, and industrial automation systems. This role is 100% onsite in Marlborough, MA. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: The MES Analyst will be responsible for overseeing the adoption/development/and support of Ken's Foods Manufacturing Execution System. This person will be tasked with being a subject matter expert on all facets of the system and work to ensure adoption and best practices across the organization. They will act as the key liaison between the corporate and plant floor teams, the technical development team, and the senior management team. They will work to provide training and assistance with the MES system. MES & Ignition Platform Support Administer, configure, and support the Ignition platform for manufacturing execution and operational visibility. Develop and maintain Ignition projects, including: Production dashboards Downtime tracking OEE monitoring Recipe management Electronic batch records Traceability applications Quality and production reporting Troubleshoot MES and Ignition-related issues affecting manufacturing operations. Manage system integrations between Ignition, PLCs, SCADA systems, historians, ERP systems, and databases. Support gateway administration, tag management, alarming, scripting, and user security within Ignition. Manufacturing & Operations Support Partner with operations, QA, maintenance, engineering, and IT teams to improve manufacturing efficiency and data accuracy. Analyze manufacturing data to identify trends, bottlenecks, downtime causes, and process improvement opportunities. Support digital transformation initiatives and plant-floor automation projects. Ensure MES functionality aligns with food safety, traceability, and regulatory compliance requirements. Assist in standardizing manufacturing processes across multiple production lines or facilities. Reporting & Data Management Create and maintain SQL queries, reports, KPIs, and production analytics. Develop real-time dashboards and visualizations for plant operations and leadership teams. Support historical data collection and reporting for audits, investigations, and compliance tracking. Validate manufacturing data integrity and troubleshoot data flow issues. Compliance & Documentation Maintain documentation for MES configurations, SOPs, workflows, validation protocols, and system changes. Support compliance with FDA, USDA, HACCP, SQF, GMP, and internal quality standards. Participate in change management, system testing, validation, and deployment activities. Assist with user training and development of work instructions. Required Qualifications • Deep understanding of Ignition or similar MES. • Understanding of manufacturing operations including batching, packaging, filling, mixing, and material traceability. • Familiarity with industrial automation systems and controls architecture. • Strong troubleshooting, analytical, and communication skills. • Lean Manufacturing or Six Sigma experience. • Experience supporting multi-site manufacturing operations. Education and/or Experience • Bachelor's degree in Engineering, Information Systems, Computer Science, Industrial Technology, Food Science, or related field. • 3+ years of MES, SCADA, or manufacturing systems experience in a production environment. • Hands-on experience with the Ignition platform by Inductive Automation or similar MES. • Experience in food and/or beverage manufacturing strongly preferred. Work Authorization Notice: Please note that we do not provide visa sponsorship or immigration support for this position. Applicants must already be authorized to work in the United States on a full-time, permanent basis without the need for current or future sponsorship. The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $110K-135k annually.
11/14/2026
Full time
SUMMARY We are seeking a highly motivated MES Analyst with experience in food manufacturing and the Ignition platform or similar MES to support, enhance, and optimize manufacturing execution systems across production operations. This role will serve as a key technical resource responsible for MES configuration, data integration, production reporting, and continuous improvement initiatives within a regulated food manufacturing environment. The ideal candidate combines manufacturing systems expertise with strong operational knowledge of food production processes, traceability requirements, and industrial automation systems. This role is 100% onsite in Marlborough, MA. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: The MES Analyst will be responsible for overseeing the adoption/development/and support of Ken's Foods Manufacturing Execution System. This person will be tasked with being a subject matter expert on all facets of the system and work to ensure adoption and best practices across the organization. They will act as the key liaison between the corporate and plant floor teams, the technical development team, and the senior management team. They will work to provide training and assistance with the MES system. MES & Ignition Platform Support Administer, configure, and support the Ignition platform for manufacturing execution and operational visibility. Develop and maintain Ignition projects, including: Production dashboards Downtime tracking OEE monitoring Recipe management Electronic batch records Traceability applications Quality and production reporting Troubleshoot MES and Ignition-related issues affecting manufacturing operations. Manage system integrations between Ignition, PLCs, SCADA systems, historians, ERP systems, and databases. Support gateway administration, tag management, alarming, scripting, and user security within Ignition. Manufacturing & Operations Support Partner with operations, QA, maintenance, engineering, and IT teams to improve manufacturing efficiency and data accuracy. Analyze manufacturing data to identify trends, bottlenecks, downtime causes, and process improvement opportunities. Support digital transformation initiatives and plant-floor automation projects. Ensure MES functionality aligns with food safety, traceability, and regulatory compliance requirements. Assist in standardizing manufacturing processes across multiple production lines or facilities. Reporting & Data Management Create and maintain SQL queries, reports, KPIs, and production analytics. Develop real-time dashboards and visualizations for plant operations and leadership teams. Support historical data collection and reporting for audits, investigations, and compliance tracking. Validate manufacturing data integrity and troubleshoot data flow issues. Compliance & Documentation Maintain documentation for MES configurations, SOPs, workflows, validation protocols, and system changes. Support compliance with FDA, USDA, HACCP, SQF, GMP, and internal quality standards. Participate in change management, system testing, validation, and deployment activities. Assist with user training and development of work instructions. Required Qualifications • Deep understanding of Ignition or similar MES. • Understanding of manufacturing operations including batching, packaging, filling, mixing, and material traceability. • Familiarity with industrial automation systems and controls architecture. • Strong troubleshooting, analytical, and communication skills. • Lean Manufacturing or Six Sigma experience. • Experience supporting multi-site manufacturing operations. Education and/or Experience • Bachelor's degree in Engineering, Information Systems, Computer Science, Industrial Technology, Food Science, or related field. • 3+ years of MES, SCADA, or manufacturing systems experience in a production environment. • Hands-on experience with the Ignition platform by Inductive Automation or similar MES. • Experience in food and/or beverage manufacturing strongly preferred. Work Authorization Notice: Please note that we do not provide visa sponsorship or immigration support for this position. Applicants must already be authorized to work in the United States on a full-time, permanent basis without the need for current or future sponsorship. The salary for this position is determined by a combination of experience, skills, and education level. The compensation range is $110K-135k annually.
Job Description Job Title: Senior Embedded Software Engineer Experience : 12 to 15 years Job Summary: We are seeking an experienced Senior Embedded Software Engineer to design, develop, test, and maintain embedded software and firmware for hardware-based systems. The ideal candidate will have strong experience in C/C++, embedded Linux, RTOS, microcontrollers, device drivers, and hardware-software integration. The candidate will work closely with hardware engineers, system architects, and cross-functional teams to deliver reliable, high-performance embedded solutions. Roles and Responsibilities: Design, develop, and maintain embedded software and firmware for electronic devices and systems. Develop software using C, C++, and assembly language. Work with microcontrollers, microprocessors, and embedded platforms. Develop and debug device drivers, BSPs, and low-level software components. Implement real-time operating systems (RTOS) and embedded Linux applications. Integrate software with hardware components and peripheral interfaces. Perform debugging, troubleshooting, and root cause analysis. Develop communication protocols such as UART, SPI, I2C, CAN, USB, and Ethernet. Optimize software performance, memory usage, and system reliability. Conduct unit testing, integration testing, and system-level validation. Collaborate with hardware, firmware, QA, and system engineering teams. Review code and ensure compliance with software development standards. Prepare technical documentation, design specifications, and test reports. Required Technical Skills: Strong programming experience in C and C++. Experience with embedded systems and firmware development. Knowledge of Embedded Linux and RTOS. Experience with microcontrollers such as ARM, STM32, PIC, or AVR. Knowledge of device drivers and Board Support Packages (BSP). Experience with debugging tools such as JTAG, GDB, and oscilloscopes. Understanding of communication protocols including UART, SPI, I2C, CAN, and Ethernet. Experience with Git, SVN, and software configuration management. Knowledge of hardware-software integration and testing. Familiarity with software development lifecycle (SDLC). Preferred Qualifications: Bachelor's or Master's degree in Computer Science, Electrical Engineering, Electronics Engineering, or a related field. 12+ years of experience in embedded software or firmware development. Experience in automotive, industrial automation, medical devices, robotics, or IoT. Knowledge of AUTOSAR, bootloaders, and real-time system design. Experience with Agile/Scrum development methodologies. Strong analytical, communication, and problem-solving skills. Key Responsibilities Lead embedded software development activities. Develop scalable and reliable firmware solutions. Improve system performance and software quality. Support product development from design through production. Mentor junior engineers and provide technical guidance. Ensure software meets functional, performance, and safety requirements.
11/14/2026
Full time
Job Description Job Title: Senior Embedded Software Engineer Experience : 12 to 15 years Job Summary: We are seeking an experienced Senior Embedded Software Engineer to design, develop, test, and maintain embedded software and firmware for hardware-based systems. The ideal candidate will have strong experience in C/C++, embedded Linux, RTOS, microcontrollers, device drivers, and hardware-software integration. The candidate will work closely with hardware engineers, system architects, and cross-functional teams to deliver reliable, high-performance embedded solutions. Roles and Responsibilities: Design, develop, and maintain embedded software and firmware for electronic devices and systems. Develop software using C, C++, and assembly language. Work with microcontrollers, microprocessors, and embedded platforms. Develop and debug device drivers, BSPs, and low-level software components. Implement real-time operating systems (RTOS) and embedded Linux applications. Integrate software with hardware components and peripheral interfaces. Perform debugging, troubleshooting, and root cause analysis. Develop communication protocols such as UART, SPI, I2C, CAN, USB, and Ethernet. Optimize software performance, memory usage, and system reliability. Conduct unit testing, integration testing, and system-level validation. Collaborate with hardware, firmware, QA, and system engineering teams. Review code and ensure compliance with software development standards. Prepare technical documentation, design specifications, and test reports. Required Technical Skills: Strong programming experience in C and C++. Experience with embedded systems and firmware development. Knowledge of Embedded Linux and RTOS. Experience with microcontrollers such as ARM, STM32, PIC, or AVR. Knowledge of device drivers and Board Support Packages (BSP). Experience with debugging tools such as JTAG, GDB, and oscilloscopes. Understanding of communication protocols including UART, SPI, I2C, CAN, and Ethernet. Experience with Git, SVN, and software configuration management. Knowledge of hardware-software integration and testing. Familiarity with software development lifecycle (SDLC). Preferred Qualifications: Bachelor's or Master's degree in Computer Science, Electrical Engineering, Electronics Engineering, or a related field. 12+ years of experience in embedded software or firmware development. Experience in automotive, industrial automation, medical devices, robotics, or IoT. Knowledge of AUTOSAR, bootloaders, and real-time system design. Experience with Agile/Scrum development methodologies. Strong analytical, communication, and problem-solving skills. Key Responsibilities Lead embedded software development activities. Develop scalable and reliable firmware solutions. Improve system performance and software quality. Support product development from design through production. Mentor junior engineers and provide technical guidance. Ensure software meets functional, performance, and safety requirements.
Business Analyst (1 Openings) Date: Start Date: 10/01/2025 Job Description: Perform the functional analysis, define project scope, end deliverables and project plan for medium to complex digital transformation programs in Insurance and Fintech domains. Gather and document business and functional requirements (Elicit, define & refine) for enterprise platforms such as Guidewire PolicyCenter, Salesforce, and CGI Collections360. Collaborate with stakeholders, SMEs, and architects to define data models, business rules, underwriting flows, and integration designs. Develop BRDs, FSDs, user stories, data mappings, and maturity assessments for regulatory, risk, and operational improvement. Facilitate Agile ceremonies including PI planning, backlog refinement, and user demos under the SAFe framework. Use tools such as Collibra, Tableau, Jira, and AWS-native services to improve data quality, platform governance, and end-to-end delivery. Field of study: Bachelor's Degree required in Computer Science or Information Systems or Electronics Engineering.
11/14/2026
Full time
Business Analyst (1 Openings) Date: Start Date: 10/01/2025 Job Description: Perform the functional analysis, define project scope, end deliverables and project plan for medium to complex digital transformation programs in Insurance and Fintech domains. Gather and document business and functional requirements (Elicit, define & refine) for enterprise platforms such as Guidewire PolicyCenter, Salesforce, and CGI Collections360. Collaborate with stakeholders, SMEs, and architects to define data models, business rules, underwriting flows, and integration designs. Develop BRDs, FSDs, user stories, data mappings, and maturity assessments for regulatory, risk, and operational improvement. Facilitate Agile ceremonies including PI planning, backlog refinement, and user demos under the SAFe framework. Use tools such as Collibra, Tableau, Jira, and AWS-native services to improve data quality, platform governance, and end-to-end delivery. Field of study: Bachelor's Degree required in Computer Science or Information Systems or Electronics Engineering.
Job Description Low Latency C++ Engineer (High-Frequency Market Making) Location: Chicago, IL Compensation: $200,000 - $300,000 Base + Highly Competitive Bonus Structure About the Firm We are representing a premier, globally recognized electronic market maker. Operating across a vast spectrum of asset classes, this firm provides liquidity to the world's most competitive exchanges. Their edge lies in their ability to process massive amounts of market data and update quotes in nanoseconds. They offer a purely engineering-driven environment where technologists have direct, visible impact. The Role We are seeking an elite C++ Developer to join the core market-making infrastructure team. You will be tasked with architecting and optimizing systems capable of ingesting massive bursts of L3 data and executing thousands of orders per second without degradation. This role is strictly focused on low-latency C++ systems engineering, hardware optimization, and network-level performance. Key Responsibilities Architect and optimize scalable, ultra-low-latency quoting engines and order management systems for global exchanges. Develop highly resilient, deterministic direct market access (DMA) gateways and feed handlers capable of processing massive tick data volumes. Eliminate latency at every level of the stack; from tweaking Linux kernel parameters and network protocols to optimizing CPU cache lines. Utilize kernel bypass (Solarflare, Mellanox) and hardware-acceleration concepts to minimize tick-to-trade latency. Work closely with high-frequency traders to translate complex liquidity-provision strategies into flawless, high-performance C++ code. Ideal Candidate Profile 5+ years of experience building mission-critical, high-throughput systems within a top-tier market making or HFT environment. Mastery of modern C++ (C+/17/20) with a strong emphasis on writing deterministic, zero-allocation code on the critical path. Deep expertise in low-level Linux systems programming, network programming (TCP/IP, UDP, Multicast), and concurrency. Familiarity with exchange microstructure, order book dynamics, and native binary protocols (e.g., OUCH, BOE). Highly analytical mindset, capable of operating autonomously to diagnose infrastructure constraints and deliver robust architectural solutions. Hit Apply Apply!
11/14/2026
Full time
Job Description Low Latency C++ Engineer (High-Frequency Market Making) Location: Chicago, IL Compensation: $200,000 - $300,000 Base + Highly Competitive Bonus Structure About the Firm We are representing a premier, globally recognized electronic market maker. Operating across a vast spectrum of asset classes, this firm provides liquidity to the world's most competitive exchanges. Their edge lies in their ability to process massive amounts of market data and update quotes in nanoseconds. They offer a purely engineering-driven environment where technologists have direct, visible impact. The Role We are seeking an elite C++ Developer to join the core market-making infrastructure team. You will be tasked with architecting and optimizing systems capable of ingesting massive bursts of L3 data and executing thousands of orders per second without degradation. This role is strictly focused on low-latency C++ systems engineering, hardware optimization, and network-level performance. Key Responsibilities Architect and optimize scalable, ultra-low-latency quoting engines and order management systems for global exchanges. Develop highly resilient, deterministic direct market access (DMA) gateways and feed handlers capable of processing massive tick data volumes. Eliminate latency at every level of the stack; from tweaking Linux kernel parameters and network protocols to optimizing CPU cache lines. Utilize kernel bypass (Solarflare, Mellanox) and hardware-acceleration concepts to minimize tick-to-trade latency. Work closely with high-frequency traders to translate complex liquidity-provision strategies into flawless, high-performance C++ code. Ideal Candidate Profile 5+ years of experience building mission-critical, high-throughput systems within a top-tier market making or HFT environment. Mastery of modern C++ (C+/17/20) with a strong emphasis on writing deterministic, zero-allocation code on the critical path. Deep expertise in low-level Linux systems programming, network programming (TCP/IP, UDP, Multicast), and concurrency. Familiarity with exchange microstructure, order book dynamics, and native binary protocols (e.g., OUCH, BOE). Highly analytical mindset, capable of operating autonomously to diagnose infrastructure constraints and deliver robust architectural solutions. Hit Apply Apply!
Automation Eng - New Machinery & Retrofit - Newark, OH Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery_ . REMOTE WORK FROM HOME AVAILABLE Seeking experience with designing control panels for retrofit projects on industrial machinery such as injection molding, electronic device assembly, packaging or similar equipment. Activities: • Provide technically acceptable solutions aimed at integrating modern digital control systems with existing production lines and design new controls systems for modern equipment requiring integration with customer plant lines. • Analyze customer requirements for controllers based on production needs, existing equipment, and quality standards. • Design the integration of HMIs, Logic Controllers, Sensors, Actuators and other aspects of modern digital machinery control systems into existing machinery lines and auxiliary equipment systems as well as new machinery being fitted into customer plants. Requirements: • B.S. with knowledge of machinery automation and retrofitting activities for digital modern controller systems for machinery. • Understanding of programmable logic controllers used on industrial machinery. Generous compensation with competitive starting salary up to $85,000. Fantastic company paid family and individual medical, health, vision and prescription coverage. Matched 401(k) and paid training, tuition reimbursement for continued education, excellent holiday and vacation package. For details contact Nicholas Owens at: ext 240 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
11/14/2026
Full time
Automation Eng - New Machinery & Retrofit - Newark, OH Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery_ . REMOTE WORK FROM HOME AVAILABLE Seeking experience with designing control panels for retrofit projects on industrial machinery such as injection molding, electronic device assembly, packaging or similar equipment. Activities: • Provide technically acceptable solutions aimed at integrating modern digital control systems with existing production lines and design new controls systems for modern equipment requiring integration with customer plant lines. • Analyze customer requirements for controllers based on production needs, existing equipment, and quality standards. • Design the integration of HMIs, Logic Controllers, Sensors, Actuators and other aspects of modern digital machinery control systems into existing machinery lines and auxiliary equipment systems as well as new machinery being fitted into customer plants. Requirements: • B.S. with knowledge of machinery automation and retrofitting activities for digital modern controller systems for machinery. • Understanding of programmable logic controllers used on industrial machinery. Generous compensation with competitive starting salary up to $85,000. Fantastic company paid family and individual medical, health, vision and prescription coverage. Matched 401(k) and paid training, tuition reimbursement for continued education, excellent holiday and vacation package. For details contact Nicholas Owens at: ext 240 Or submit resume online at: Or email to: Please reference when responding. Diedre Moire Corporation Diedre Moire Corporation, Inc. WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Automation Engineer Controls Designer PLCs Programmable Logic Controllers Programmer Integration HMIs Human Machine Interfaces Robots Motors Sensors Actuators Linear & Rotary Motion Control Machine Vision Electronics AC & DC Electrical Power Servos Industrial Manufacturing Machinery DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call .
Pay Range: $50.00hr - $55.00hr Job Overview: As a Consulting Data Engineer, the successful candidate will architect, build, and optimize the next generation of real-time healthcare data platforms and event-driven architectures. The candidate will play a foundational role in moving clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, the candidate will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. The candidate will bridge the gap between complex electronic health records (EHR) and data consumers-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities: Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications: 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $50.00hr - $55.00hr Job Overview: As a Consulting Data Engineer, the successful candidate will architect, build, and optimize the next generation of real-time healthcare data platforms and event-driven architectures. The candidate will play a foundational role in moving clinical, operational, and financial data away from legacy batch processing toward high-throughput, near-zero-latency streaming pipelines. In this role, the candidate will champion modern data engineering practices, design highly scalable cloud-native pipelines, and mentor a growing team of engineers. The candidate will bridge the gap between complex electronic health records (EHR) and data consumers-enabling data scientists, software engineers, and clinical analysts to securely access, stream, and query compliant data at scale to improve patient outcomes and operational efficiency. Core Responsibilities: Architect Real-Time Pipelines: Design, implement, and monitor high-throughput, fault-tolerant streaming pipelines that ingest and process millions of concurrent healthcare data events (e.g., live telemetry, HL7 feeds, ADT messages). Scale Google Cloud Infrastructure: Build and maintain scalable, secure, and cost-effective cloud data infrastructure using Google Cloud healthcare-native tools and Infrastructure as Code (IaC). Enforce Healthcare Compliance & Security: Uphold strict data security protocols (HIPAA, HITRUST, SOC2) by building robust data lakehouse architectures that enforce PHI/PII masking, role-based access control (RBAC), and encryption at rest and in transit. Enable Self-Service Data & Interoperability: Build out streaming data ecosystems that support modern healthcare interoperability, managing real-time data catalogs and schema registries. Promote Code Excellence: Write modular, highly reusable, and performance-tested code; lead code reviews and establish standardized CI/CD automated deployment workflows. Optimize Data Reliability: Set and champion strict SLAs for clinical data delivery, establish automated data-quality testing, and implement proactive system monitoring and alerting. Collaborate & Mentor: Work closely with Data Architects, Clinical Product Managers, and AI/ML teams to translate healthcare requirements into technical blueprints while mentoring mid-level engineers. Required Qualifications: 13+ years of experience in dedicated data engineering, data architecture, or distributed systems software engineering roles. 4+ years of experience specifically within the healthcare domain (payer, provider, digital health, or health tech). Google Cloud Certified Professional Data Engineer (or equivalent proven expert-level architecture experience on GCP). Advanced Event-Driven Architecture: Mastery of high-volume streaming technologies including Apache Kafka and Google Cloud Pub/Sub for decoupled, real-time message routing. Stream Processing: Deep hands-on experience with Apache Flink or Google Cloud Dataflow (Apache Beam) for real-time streaming, complex event processing (CEP), windowing, and streaming data transformations. Interoperability Standards: Deep expertise working with FHIR (Fast Healthcare Interoperability Resources) JSON structures, HL7 v2/v3 messaging, and DICOM imaging standard streams. GCP Healthcare Tools: Hands-on experience implementing and scaling the Google Cloud Healthcare API (specifically FHIR stores and HL7v2 stores). EHR Integration: Experience integrating streaming pipelines with major EHR systems (such as Epic, Cerner, or Meditech). Google Cloud Ecosystem: Technical mastery of BigQuery (including partitioning, clustering, and streaming inserts), Cloud Storage, Dataproc, and Cloud Composer (Apache Airflow). Programming Languages: Proficiency in Python, Scala, or Java, with a strong focus on writing optimized code for distributed computing platforms (like Spark or Beam). Modern Data Stack & Modeling: Mastery of modern analytics engineering frameworks (such as dbt), dimensional data modeling, and lakehouse architectures (e.g., Iceberg, Delta Lake). DevOps & Automation: Robust experience building automated CI/CD pipelines (GitHub Actions, GitLab CI) and managing infrastructure using Terraform. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
This job is with HP, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Field Technical Support Description - This role is responsible for leading on-site technical support for end users and authorized print service providers. The family of jobs is focused on managing the onsite, delivering software and hardware services, pre-sales, post-sales or service delivery support, installation, and configuration for customer environments. Deliver reactive and proactive activities according to the Service Level agreement to ensure customer satisfaction and loyalty. The role maintains high customer satisfaction levels, addressing customer-related issues promptly. The role maintains documentation, collaborates for process improvement, ensures data confidentiality, and completes tasks with minimal supervision. Responsibilities • Maintains high level of customer satisfaction, responsible for HP Total Customer Experience as well as revenue growth, profitability, and account retention. • Addresses and manages customer-relation issues with promptness and appropriateness, ensuring that concerns are resolved and escalated as per established protocols. • Provides comprehensive technical services, encompassing post-sales and service delivery support, while efficiently addressing application issues for both remote and local accounts across standard and specialized systems. • Leads direct post-sales technical support for end users and organization's authorized service providers, resolving technical challenges on designated hardware and software platforms. • Employs proactive monitoring methods and tools to identify opportunities for preventing problems and enhancing customer experiences. • Maintains departmental documentation on work orders, software, inventory, and other paperwork required. • Aligns individual work with strategy, collaborates with teams to enhance operations and implement process improvements to standardize processes globally. • Adheres to established standards, ensuring data confidentiality, and supports execution of business processes with independent judgment. • Completes process-oriented assignments, shares technical information, and supports department-level operational plans. • Identifies and solves varied problems and completes day-to-day tasks with forward planning and minimal supervision. Education & Experience Recommended • High School Diploma/General Education Diploma (GED)/Higher Secondary education or commensurate work experience or demonstrated competence. • Typically has 4-6 years of related work experience, preferably servicing digital printing equipment, technical customer support, on site customer support, Mission Critical, systems experience or troubleshooting Mechanical and Electrical subsystems in a related field. Preferred Certifications NA Knowledge & Skills • Automation • Chemistry • Commissioning • Customer Relationship Management • Customer Support • Electrical Engineering • Electromechanics • Electronics • Environment Health And Safety • Field Service Management • Hand Tools • Key Performance Indicators (KPIs) • Operating Systems • Preventive Maintenance • Process Improvement • Safety Standards • Technical Services • Technical Support • Technical Training The pay range for this position is $25.00 to $38.10 per hour (applies to US candidates only). Pay varies by work location, job-related knowledge, skills, and experience. Benefits: HP offers a comprehensive benefits package for this position, including: Health insurance Dental insurance Vision insurance Long term/short term disability insurance Employee assistance program Flexible spending account Life insurance Generous time off policies, including; 4-12 weeks fully paid parental leave based on tenure 13 paid holidays 15 days paid time off ( US benefits overview ) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Job - Services Schedule - Full time Shift - No shift premium (United States of America) Travel - 50% Relocation - No Equal Opportunity Employer (EEO) - HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s). Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence. For more information, review HP's EEO Policy or read about your rights as an applicant under the law here: " Know Your Rights: Workplace Discrimination is Illegal "
11/14/2026
Full time
This job is with HP, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. Field Technical Support Description - This role is responsible for leading on-site technical support for end users and authorized print service providers. The family of jobs is focused on managing the onsite, delivering software and hardware services, pre-sales, post-sales or service delivery support, installation, and configuration for customer environments. Deliver reactive and proactive activities according to the Service Level agreement to ensure customer satisfaction and loyalty. The role maintains high customer satisfaction levels, addressing customer-related issues promptly. The role maintains documentation, collaborates for process improvement, ensures data confidentiality, and completes tasks with minimal supervision. Responsibilities • Maintains high level of customer satisfaction, responsible for HP Total Customer Experience as well as revenue growth, profitability, and account retention. • Addresses and manages customer-relation issues with promptness and appropriateness, ensuring that concerns are resolved and escalated as per established protocols. • Provides comprehensive technical services, encompassing post-sales and service delivery support, while efficiently addressing application issues for both remote and local accounts across standard and specialized systems. • Leads direct post-sales technical support for end users and organization's authorized service providers, resolving technical challenges on designated hardware and software platforms. • Employs proactive monitoring methods and tools to identify opportunities for preventing problems and enhancing customer experiences. • Maintains departmental documentation on work orders, software, inventory, and other paperwork required. • Aligns individual work with strategy, collaborates with teams to enhance operations and implement process improvements to standardize processes globally. • Adheres to established standards, ensuring data confidentiality, and supports execution of business processes with independent judgment. • Completes process-oriented assignments, shares technical information, and supports department-level operational plans. • Identifies and solves varied problems and completes day-to-day tasks with forward planning and minimal supervision. Education & Experience Recommended • High School Diploma/General Education Diploma (GED)/Higher Secondary education or commensurate work experience or demonstrated competence. • Typically has 4-6 years of related work experience, preferably servicing digital printing equipment, technical customer support, on site customer support, Mission Critical, systems experience or troubleshooting Mechanical and Electrical subsystems in a related field. Preferred Certifications NA Knowledge & Skills • Automation • Chemistry • Commissioning • Customer Relationship Management • Customer Support • Electrical Engineering • Electromechanics • Electronics • Environment Health And Safety • Field Service Management • Hand Tools • Key Performance Indicators (KPIs) • Operating Systems • Preventive Maintenance • Process Improvement • Safety Standards • Technical Services • Technical Support • Technical Training The pay range for this position is $25.00 to $38.10 per hour (applies to US candidates only). Pay varies by work location, job-related knowledge, skills, and experience. Benefits: HP offers a comprehensive benefits package for this position, including: Health insurance Dental insurance Vision insurance Long term/short term disability insurance Employee assistance program Flexible spending account Life insurance Generous time off policies, including; 4-12 weeks fully paid parental leave based on tenure 13 paid holidays 15 days paid time off ( US benefits overview ) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Job - Services Schedule - Full time Shift - No shift premium (United States of America) Travel - 50% Relocation - No Equal Opportunity Employer (EEO) - HP, Inc. provides equal employment opportunity to all employees and prospective employees, without regard to race, color, religion, sex, national origin, ancestry, citizenship, sexual orientation, age, disability, or status as a protected veteran, marital status, familial status, physical or mental disability, medical condition, pregnancy, genetic predisposition or carrier status, uniformed service status, political affiliation or any other characteristic protected by applicable national, federal, state, and local law(s). Please be assured that you will not be subject to any adverse treatment if you choose to disclose the information requested. This information is provided voluntarily. The information obtained will be kept in strict confidence. For more information, review HP's EEO Policy or read about your rights as an applicant under the law here: " Know Your Rights: Workplace Discrimination is Illegal "
This job is with S&P Global, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. About the Role: Grade Level (for internal use): 15 The Team: Enterprise Solutions (ES) Technology is a powerful combination of world class people and businesses with a shared mission and legacy of evolving markets and delivering for the most demanding customers in the world. We are the catalyst to bring data, software, services, and expertise together to power the markets of the future. We drive growth through world class execution, a growth mindset, and our unique expertise and passion for building innovative and connected solutions. We collaborate with our business line to drive business growth by focusing on execution of our joint product strategies. We ensure that we maximize business value while at the same time minimizing cost of ownership of our technology estate. Responsibilities and Impact: Define and lead the AI/ML and applied data science roadmap for Enterprise Solutions, shaping high-rigor analytical capabilities across a complex, regulated global financial-services environment. Design, build, and operate production-grade models for anomaly detection, variance analysis, drift detection, forecasting, behavioural signals, and prediction, ensuring they are accurate, explainable, resilient, and regulator-ready. Own the full model lifecycle from problem framing, data exploration, feature engineering, back-testing, validation, deployment, monitoring, tuning, and incident response when models degrade or fail in production. Partner closely with engineering, data platform, product, and business teams to translate complex analytical problems into scalable, production-ready ML systems that deliver measurable operational and business outcomes. Act as a hands-on technical authority and multiplier, reviewing models, guiding senior practitioners, improving data quality and monitoring standards, and influencing decisions through deep expertise rather than formal authority. Gain high-impact exposure to senior technology leaders, market-facing financial-services platforms, regulated AI/ML practices, and global enterprise-scale transformation, with the opportunity to shape how advanced analytics and machine learning are applied safely and effectively in production. Compensation/Benefits Information: S&P Global states that the anticipated base salary range for this position is $177,036 to $350,000. Final base salary for this role will be based on the individual's geographic location, as well as experience level, skill set, training, licenses and certifications. In addition to base compensation, this role is eligible for an annual incentive plan. This role is eligible to receive additional S&P Global benefits. For more information on the benefits we provide to our employees, please click here . What we are looking for: 25+ years of experience in analytics, data science, and machine learning, with a strong track record of delivering and operating production-grade models within financial services or other highly regulated, high-availability environments. Deep expertise in applied data science and ML, including statistical modelling, predictive analytics, model development, validation, deployment, monitoring, and optimisation across the full model lifecycle. Strong hands-on technical skills, with the ability to work directly with data, code, ML frameworks, and complex datasets, while partnering effectively with software engineering and platform teams. Experience building scalable, reliable, and explainable AI/ML solutions that meet operational, governance, and regulatory requirements and deliver measurable business outcomes. Additional Preferred Qualifications: Pragmatic and outcome-oriented mindset, focused on delivering models that perform reliably in production and create tangible business value. Excellent communication and stakeholder management skills, with the ability to clearly explain modelling decisions, assumptions, risks, and limitations to both technical and non-technical audiences. Influential leadership and collaboration, capable of driving alignment and technical excellence across cross-functional teams without relying on formal authority. Coaching and mentoring capability, guiding and developing data scientists through technical reviews, knowledge sharing, hands-on support, and leading by example. Right to Work Requirements: This role is limited to persons with indefinite right to work in the United States. Return to Work: Have you taken time out for caring responsibilities and are now looking to return to work? As part of our Return to Work initiative, Restart, we are encouraging enthusiastic and talented returners to apply, and will actively support your return to the workplace. About S&P Global Market Intelligence At S&P Global Market Intelligence, a division of S&P Global we understand the importance of accurate, deep and insightful information. Our team of experts delivers unrivaled insights and leading data and technology solutions, partnering with customers to expand their perspective, operate with confidence, and make decisions with conviction. For more information, visit . What's In It For You? Our Mission: Advancing Essential Intelligence. Our People: We're more than 35,000 strong worldwide-so we're able to understand nuances while having a broad perspective. Our team is driven by curiosity and a shared belief that Essential Intelligence can help build a more prosperous future for us all.From finding new ways to measure sustainability to analyzing energy transition across the supply chain to building workflow solutions that make it easy to tap into insight and apply it. We are changing the way people see things and empowering them to make an impact on the world we live in. We're committed to a more equitable future and to helping our customers find new, sustainable ways of doing business. Join us and help create the critical insights that truly make a difference. Our Values: Integrity, Discovery, Partnership Throughout our history, the world's leading organizations have relied on us for the Essential Intelligence they need to make confident decisions about the road ahead. We start with a foundation of integrity in all we do, bring a spirit of discovery to our work, and collaborate in close partnership with each other and our customers to achieve shared goals. Benefits: We take care of you, so you can take care of business. We care about our people. That's why we provide everything you-and your career-need to thrive at S&P Global. Our benefits include: Health & Wellness: Health care coverage designed for the mind and body. Flexible Downtime: Generous time off helps keep you energized for your time on. Continuous Learning: Access a wealth of resources to grow your career and learn valuable new skills. Invest in Your Future: Secure your financial future through competitive pay, retirement planning, a continuing education program with a company-matched student loan contribution, and financial wellness programs. Family Friendly Perks: It's not just about you. S&P Global has perks for your partners and little ones, too, with some best-in class benefits for families. Beyond the Basics: From retail discounts to referral incentive awards-small perks can make a big difference. For more information on benefits by country visit: Global Hiring and Opportunity at S&P Global: At S&P Global, we are committed to fostering a connected and engaged workplace where all individuals have access to opportunities based on their skills, experience, and contributions. Our hiring practices emphasize fairness, transparency, and merit, ensuring that we attract and retain top talent. By valuing different perspectives and promoting a culture of respect and collaboration, we drive innovation and power global markets. Recruitment Fraud Alert: If you receive an email from a domain or any other regionally based domains, it is a scam and should be reported to . S&P Global never requires any candidate to pay money for job applications, interviews, offer letters, "pre-employment training" or for equipment/delivery of equipment. Stay informed and protect yourself from recruitment fraud by reviewing our guidelines, fraudulent domains, and how to report suspicious activity here . - Equal Opportunity Employer S&P Global is an equal opportunity employer and all qualified candidates will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Only electronic job submissions will be considered for employment. If you need an accommodation during the application process due to a disability, please send an email to: and your request will be forwarded to the appropriate person. US Candidates Only: Know Your Rights: Workplace discrimination is illegal . click apply for full job details
11/14/2026
Full time
This job is with S&P Global, an inclusive employer and a member of myGwork - the largest global platform for the LGBTQ+ business community. Please do not contact the recruiter directly. About the Role: Grade Level (for internal use): 15 The Team: Enterprise Solutions (ES) Technology is a powerful combination of world class people and businesses with a shared mission and legacy of evolving markets and delivering for the most demanding customers in the world. We are the catalyst to bring data, software, services, and expertise together to power the markets of the future. We drive growth through world class execution, a growth mindset, and our unique expertise and passion for building innovative and connected solutions. We collaborate with our business line to drive business growth by focusing on execution of our joint product strategies. We ensure that we maximize business value while at the same time minimizing cost of ownership of our technology estate. Responsibilities and Impact: Define and lead the AI/ML and applied data science roadmap for Enterprise Solutions, shaping high-rigor analytical capabilities across a complex, regulated global financial-services environment. Design, build, and operate production-grade models for anomaly detection, variance analysis, drift detection, forecasting, behavioural signals, and prediction, ensuring they are accurate, explainable, resilient, and regulator-ready. Own the full model lifecycle from problem framing, data exploration, feature engineering, back-testing, validation, deployment, monitoring, tuning, and incident response when models degrade or fail in production. Partner closely with engineering, data platform, product, and business teams to translate complex analytical problems into scalable, production-ready ML systems that deliver measurable operational and business outcomes. Act as a hands-on technical authority and multiplier, reviewing models, guiding senior practitioners, improving data quality and monitoring standards, and influencing decisions through deep expertise rather than formal authority. Gain high-impact exposure to senior technology leaders, market-facing financial-services platforms, regulated AI/ML practices, and global enterprise-scale transformation, with the opportunity to shape how advanced analytics and machine learning are applied safely and effectively in production. Compensation/Benefits Information: S&P Global states that the anticipated base salary range for this position is $177,036 to $350,000. Final base salary for this role will be based on the individual's geographic location, as well as experience level, skill set, training, licenses and certifications. In addition to base compensation, this role is eligible for an annual incentive plan. This role is eligible to receive additional S&P Global benefits. For more information on the benefits we provide to our employees, please click here . What we are looking for: 25+ years of experience in analytics, data science, and machine learning, with a strong track record of delivering and operating production-grade models within financial services or other highly regulated, high-availability environments. Deep expertise in applied data science and ML, including statistical modelling, predictive analytics, model development, validation, deployment, monitoring, and optimisation across the full model lifecycle. Strong hands-on technical skills, with the ability to work directly with data, code, ML frameworks, and complex datasets, while partnering effectively with software engineering and platform teams. Experience building scalable, reliable, and explainable AI/ML solutions that meet operational, governance, and regulatory requirements and deliver measurable business outcomes. Additional Preferred Qualifications: Pragmatic and outcome-oriented mindset, focused on delivering models that perform reliably in production and create tangible business value. Excellent communication and stakeholder management skills, with the ability to clearly explain modelling decisions, assumptions, risks, and limitations to both technical and non-technical audiences. Influential leadership and collaboration, capable of driving alignment and technical excellence across cross-functional teams without relying on formal authority. Coaching and mentoring capability, guiding and developing data scientists through technical reviews, knowledge sharing, hands-on support, and leading by example. Right to Work Requirements: This role is limited to persons with indefinite right to work in the United States. Return to Work: Have you taken time out for caring responsibilities and are now looking to return to work? As part of our Return to Work initiative, Restart, we are encouraging enthusiastic and talented returners to apply, and will actively support your return to the workplace. About S&P Global Market Intelligence At S&P Global Market Intelligence, a division of S&P Global we understand the importance of accurate, deep and insightful information. Our team of experts delivers unrivaled insights and leading data and technology solutions, partnering with customers to expand their perspective, operate with confidence, and make decisions with conviction. For more information, visit . What's In It For You? Our Mission: Advancing Essential Intelligence. Our People: We're more than 35,000 strong worldwide-so we're able to understand nuances while having a broad perspective. Our team is driven by curiosity and a shared belief that Essential Intelligence can help build a more prosperous future for us all.From finding new ways to measure sustainability to analyzing energy transition across the supply chain to building workflow solutions that make it easy to tap into insight and apply it. We are changing the way people see things and empowering them to make an impact on the world we live in. We're committed to a more equitable future and to helping our customers find new, sustainable ways of doing business. Join us and help create the critical insights that truly make a difference. Our Values: Integrity, Discovery, Partnership Throughout our history, the world's leading organizations have relied on us for the Essential Intelligence they need to make confident decisions about the road ahead. We start with a foundation of integrity in all we do, bring a spirit of discovery to our work, and collaborate in close partnership with each other and our customers to achieve shared goals. Benefits: We take care of you, so you can take care of business. We care about our people. That's why we provide everything you-and your career-need to thrive at S&P Global. Our benefits include: Health & Wellness: Health care coverage designed for the mind and body. Flexible Downtime: Generous time off helps keep you energized for your time on. Continuous Learning: Access a wealth of resources to grow your career and learn valuable new skills. Invest in Your Future: Secure your financial future through competitive pay, retirement planning, a continuing education program with a company-matched student loan contribution, and financial wellness programs. Family Friendly Perks: It's not just about you. S&P Global has perks for your partners and little ones, too, with some best-in class benefits for families. Beyond the Basics: From retail discounts to referral incentive awards-small perks can make a big difference. For more information on benefits by country visit: Global Hiring and Opportunity at S&P Global: At S&P Global, we are committed to fostering a connected and engaged workplace where all individuals have access to opportunities based on their skills, experience, and contributions. Our hiring practices emphasize fairness, transparency, and merit, ensuring that we attract and retain top talent. By valuing different perspectives and promoting a culture of respect and collaboration, we drive innovation and power global markets. Recruitment Fraud Alert: If you receive an email from a domain or any other regionally based domains, it is a scam and should be reported to . S&P Global never requires any candidate to pay money for job applications, interviews, offer letters, "pre-employment training" or for equipment/delivery of equipment. Stay informed and protect yourself from recruitment fraud by reviewing our guidelines, fraudulent domains, and how to report suspicious activity here . - Equal Opportunity Employer S&P Global is an equal opportunity employer and all qualified candidates will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Only electronic job submissions will be considered for employment. If you need an accommodation during the application process due to a disability, please send an email to: and your request will be forwarded to the appropriate person. US Candidates Only: Know Your Rights: Workplace discrimination is illegal . click apply for full job details
