14 jobs found

Job Description Job Description Position Summary The Method Level III (RT/DDA) is the technical authority for all radiographic testing activities utilizing film and/or Digital Detector Array (DDA) technology. This position is responsible for developing, implementing, maintaining, and improving RT inspection methods while ensuring compliance with customer specifications, industry standards, regulatory requirements, and the company's quality management system. The Method Level III provides technical leadership, certifies NDT personnel, develops inspection techniques, resolves technical issues, supports audits, and serves as the primary technical resource for RT/DDA operations. Essential Duties and ResponsibilitiesTechnical Leadership Serve as the technical authority for Radiographic Testing (RT) utilizing Digital Detector Array (DDA) systems. Develop, qualify, validate, and approve RT techniques and written instructions. Interpret and apply customer specifications, engineering drawings, and applicable codes and standards. Evaluate new inspection methods, equipment, and software. Provide technical guidance to Level I and Level II personnel. Personnel Qualification and Certification Administer the company's NDT certification program in accordance with NAS 410 or customer requirements. Train, mentor, and examine Level I and Level II personnel. Conduct practical, specific, and general examinations as required. Maintain certification records and training documentation. Quality Assurance Ensure compliance with: NAS 410 ASTM standards Customer specifications Internal procedures FAA and aerospace quality requirements (when applicable) Review inspection results for technical accuracy. Investigate nonconformances and recommend corrective actions. Participate in internal, customer, and third-party audits. Equipment and Process Control Approve RT equipment for production use. Verify system performance and image quality. Review and approve calibration and maintenance requirements. Validate software revisions affecting inspection capability. Monitor image quality indicators (IQIs), detector performance, and exposure techniques. Documentation Prepare and revise: Written techniques Standard operating procedures Work instructions Inspection reports Technical justifications Training materials Continuous Improvement Identify opportunities to improve inspection efficiency and quality. Support implementation of new technologies and automation. Participate in Lean, Six Sigma, or continuous improvement initiatives. QualificationsEducation High school diploma or GED required. Associate's or Bachelor's degree in Engineering, Materials Science, Physics, or related technical field preferred. Experience Certified RT Level III in accordance with NAS 410 or equivalent. Minimum 5-10 years of aerospace or industrial radiographic inspection experience. Demonstrated experience with Digital Detector Array (DDA) systems. Experience developing RT techniques and interpreting aerospace specifications. Previous experience training and certifying NDT personnel preferred. Required Knowledge Strong working knowledge of: Digital Radiography (DDA) Computed Radiography (preferred) Image quality evaluation Radiation safety Geometric unsharpness Exposure techniques Defect characterization Aerospace manufacturing processes Castings, welds, composites, and machined components Digital image processing software Customer-specific requirements Certifications Required: NAS 410 RT Level III (or ability to obtain) Current radiation safety training Preferred: ASNT NDT Level III Additional Level III certifications (FPI, UT, ET, MT, etc.) Skills Excellent technical writing Strong problem-solving ability Leadership and mentoring skills Excellent communication Ability to interpret complex engineering drawings and specifications Proficiency with Microsoft Office and NDT software systems Physical Requirements Ability to stand, walk, and lift up to 35 pounds. Ability to distinguish image quality and fine indications on digital displays. Work in manufacturing and controlled radiation environments. Use required personal protective equipment. Working Conditions Manufacturing environment with exposure to radiation-controlled areas. Occasional overtime or weekend support during production demands. May require occasional travel for customer meetings, audits, or training. Primary Responsibilities Maintain RT/DDA technical compliance. Certify and mentor NDT personnel. Approve inspection techniques and procedures. Ensure customer and regulatory compliance. Support production through technical expertise. Drive continuous improvement of RT/DDA processes.

Job Description Job Description Join a Team Where Precision Matters Mill Creek Machining, a location of Delva Tool & Machine, is looking for a CMM Programmer I, II, or III to support our growing operations in Paullina, IA. If you thrive in a fast-paced manufacturing environment and take pride in delivering high-quality, precision work, this is your opportunity to grow with a company that values craftsmanship, accountability, and continuous improvement. What You'll Do As a CMM Programmer, you'll play a key role in ensuring our products meet strict customer and industry standards. Depending on your experience level, responsibilities may include: Develop, generate, validate, and maintain CMM programs for dimensional inspection of precision machined parts Program and support metrology systems including CMM, 3D scanning, and vision inspection equipment Interpret complex engineering drawings, specifications, and GD&T requirements Perform first article inspections (AS9102), in-process inspections, and final inspections Customize inspection reports and outputs to meet internal, customer, and regulatory standards Identify dimensional discrepancies, conduct root cause analysis, and recommend corrective actions Collaborate with Quality, Engineering, and Production teams to improve inspection strategies and part conformity Create work instructions, procedures, and documentation for inspection processes Support continuous improvement initiatives related to inspection efficiency, automation, and quality systems Maintain compliance with AS9100/ISO standards and customer-specific requirements What We're Looking For We're hiring at multiple levels (I, II, III), and the right candidate will bring: Experience in manufacturing, preferably CNC machining, aerospace, defense, or precision environments Strong understanding of GD&T and technical drawing interpretation Experience with CMM software (PC-DMIS, Calypso, or similar preferred) Familiarity with metrology tools, inspection systems, and quality documentation AS9100/ISO and AS9102 experience preferred Strong analytical, problem-solving, and documentation skills Excellent communication and team collaboration Commitment to quality, precision, and continuous improvement We are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate. Mill Creek Machining Terms and Conditions: 1. Candidates who opt in will receive SMS messages related to employment opportunities and the recruiting process, including application updates, interview scheduling and reminders, hiring process updates, requests for additional information, and other job-related communications from Mill Creek Machining. 2. You can cancel the SMS service at any time. Just text "STOP" to the short code. After you send the SMS message "STOP" to us, we will send you an SMS message to confirm that you have been unsubscribed. After this, you will no longer receive SMS messages from us. If you want to join again, just sign up as you did the first time and we will start sending SMS messages to you again. 3. If you are experiencing issues with the messaging program you can reply with the keyword HELP for more assistance, or you can get help directly at . 4. Carriers are not liable for delayed or undelivered messages 5. As always, message and data rates may apply for any messages sent to you from us and to us from you. You will receive message frequency . If you have any questions about your text plan or data plan, it is best to contact your wireless provider. 6. If you have any questions regarding privacy, please read our privacy policy below. Privacy Policy: We collect your mobile number and related opt-in data for the delivery of SMS messages. Your mobile opt-in data and consent will not be shared with third parties or affiliates for marketing or promotional purposes. Powered by JazzHR XnEWae5nvA

Hunter Douglas is seeking an Automation & Equipment Engineer II to design, optimize, and support automated equipment used to manufacture custom window treatments and architectural products. In this on-site role, you will develop and improve machinery, program and troubleshoot PLCs and control systems, and lead commissioning and validation of new equipment. You'll collaborate with cross-functional teams to enhance safety, quality, and throughput, drive continuous improvement, and support smart-home and advanced shading solutions in a precision-focused manufacturing environment. Responsibilities Design, develop, and improve automated equipment for custom window treatment manufacturing. Program, integrate, and troubleshoot PLCs, robotics, and control systems on the production floor. Lead equipment commissioning, testing, and validation to ensure safety, reliability, and performance. Analyze production data to improve uptime, throughput, and product quality. Collaborate with cross-functional teams on new product introductions and process changes. Create and maintain technical documentation, drawings, and preventive maintenance standards. Train maintenance and operations teams on new or upgraded automation equipment. Drive continuous improvement projects using lean and problem-solving methodologies. Required Skills Automation engineering Industrial equipment design PLC programming Robotics integration Manufacturing process optimization CAD/solid modeling Electrical/mechanical troubleshooting Control systems design Data collection & OEE analysis Lean manufacturing/continuous improvement

Hunter Douglas is seeking an Automation & Equipment Engineer II to design, optimize, and support automated equipment used to manufacture custom window treatments and architectural products. In this on-site role, you will develop and improve machinery, program and troubleshoot PLCs and control systems, and lead commissioning and validation of new equipment. You'll collaborate with cross-functional teams to enhance safety, quality, and throughput, drive continuous improvement, and support smart-home and advanced shading solutions in a precision-focused manufacturing environment. Responsibilities Design, develop, and improve automated equipment for custom window treatment manufacturing. Program, integrate, and troubleshoot PLCs, robotics, and control systems on the production floor. Lead equipment commissioning, testing, and validation to ensure safety, reliability, and performance. Analyze production data to improve uptime, throughput, and product quality. Collaborate with cross-functional teams on new product introductions and process changes. Create and maintain technical documentation, drawings, and preventive maintenance standards. Train maintenance and operations teams on new or upgraded automation equipment. Drive continuous improvement projects using lean and problem-solving methodologies. Required Skills Automation engineering Industrial equipment design PLC programming Robotics integration Manufacturing process optimization CAD/solid modeling Electrical/mechanical troubleshooting Control systems design Data collection & OEE analysis Lean manufacturing/continuous improvement

Hunter Douglas is seeking an Automation & Equipment Engineer II to design, optimize, and support automated equipment used to manufacture custom window treatments and architectural products. In this on-site role, you will develop and improve machinery, program and troubleshoot PLCs and control systems, and lead commissioning and validation of new equipment. You'll collaborate with cross-functional teams to enhance safety, quality, and throughput, drive continuous improvement, and support smart-home and advanced shading solutions in a precision-focused manufacturing environment. Responsibilities Design, develop, and improve automated equipment for custom window treatment manufacturing. Program, integrate, and troubleshoot PLCs, robotics, and control systems on the production floor. Lead equipment commissioning, testing, and validation to ensure safety, reliability, and performance. Analyze production data to improve uptime, throughput, and product quality. Collaborate with cross-functional teams on new product introductions and process changes. Create and maintain technical documentation, drawings, and preventive maintenance standards. Train maintenance and operations teams on new or upgraded automation equipment. Drive continuous improvement projects using lean and problem-solving methodologies. Required Skills Automation engineering Industrial equipment design PLC programming Robotics integration Manufacturing process optimization CAD/solid modeling Electrical/mechanical troubleshooting Control systems design Data collection & OEE analysis Lean manufacturing/continuous improvement

Hunter Douglas is seeking an Automation & Equipment Engineer II to design, optimize, and support automated equipment used to manufacture custom window treatments and architectural products. In this on-site role, you will develop and improve machinery, program and troubleshoot PLCs and control systems, and lead commissioning and validation of new equipment. You'll collaborate with cross-functional teams to enhance safety, quality, and throughput, drive continuous improvement, and support smart-home and advanced shading solutions in a precision-focused manufacturing environment. Responsibilities Design, develop, and improve automated equipment for custom window treatment manufacturing. Program, integrate, and troubleshoot PLCs, robotics, and control systems on the production floor. Lead equipment commissioning, testing, and validation to ensure safety, reliability, and performance. Analyze production data to improve uptime, throughput, and product quality. Collaborate with cross-functional teams on new product introductions and process changes. Create and maintain technical documentation, drawings, and preventive maintenance standards. Train maintenance and operations teams on new or upgraded automation equipment. Drive continuous improvement projects using lean and problem-solving methodologies. Required Skills Automation engineering Industrial equipment design PLC programming Robotics integration Manufacturing process optimization CAD/solid modeling Electrical/mechanical troubleshooting Control systems design Data collection & OEE analysis Lean manufacturing/continuous improvement

Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PI23be024da53a-8688

Job Description Job Description Primary Talent Partners has a new contract opening for a Prin Electrical Engineer with our medical device client in Mounds View, MN. This is a 12-month contract with a potential for extension. Pay: $65.00 - $75.00$/hr ; W2 contract, no PTO, no Benefits. ACA-compliant supplemental package available for enrollment. Candidates must be legally authorized to work in the United States and must be able to sit on Primary Talent Partners W2 without sponsorship. Description: Responsibilities may include the following and other duties may be assigned: Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Qualifications: Minimum of a completed Bachelor's degree is required, ideally in Electrical Engineering 10+ years of experience Medical device experience highly preferred Top 3 skill sets required: Hardware/firmware troubleshooting and lab debug. Design verification of hardware requirements: test plans, characterization, test procedures, and reports. Class III medical device design controls and test automation: requirements traceability, Good Documentation Practices, test method and software validation, data analysis, and ISO 14708 / IEC 60601 compliance. 3 main responsibilities/day to day activities required for this role: Own hardware blocks for implantable devices across new development and sustaining: requirements, design changes, analysis, root-cause investigation, verification strategy, design documentation, and impact assessments. Characterize and verify hardware requirements through a mix of hands-on lab work and analysis. Support production test and manufacturing troubleshooting. Primary Talent Partners is an Equal Opportunity / Affirmative Action employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws. If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at

Job Description Job Description Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PI648c9f6569a9-8688

Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PI7e9a97ebfa40-8688

Job Description Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. This is an onsite role only. Job Purpose and Overview Step into the world of metal additive manufacturing for the KARNO generator , where advanced laser powder-bed fusion meets real engineering challenge. Engineers in this group work across machine behavior, process optimization, material performance, data analytics, and hardware development to ensure high-quality, repeatable production using metal laser powder-bed fusion systems. If you're the kind of engineer who enjoys digging into machine behavior, fine-tuning laser strategies, studying how materials evolve layer by layer, and pushing metal AM systems to run cleaner, faster, and more consistently, this team is built for you. The work is hands-on, data-driven, and central to scaling a first-of-its-kind distributed power technology. In this role, you'll move across the entire additive manufacturing ecosystem. You'll investigate how machine settings influence melt pools, porosity, and microstructure, and you'll design controlled experiments to refine parameters and boost repeatability. A big part of the job involves troubleshooting machine quirks, interpreting sensor data, and making sense of real-time process feedback. You'll also be working closely with design, materials, and hardware teams to bring complex AM components from early prototypes into reliable production. Along the way, you'll help build the systems, standards, and workflows that turn metal AM into a high-trust, high-reliability manufacturing process for power-generation hardware. Duties and Responsibilities: Parameter Development Focus Identify and optimize critical-to-function (CTF) parameters that drive mechanical performance, density, porosity, microstructure, and repeatability. Design and execute experiments (DOE) to map the process window, understand sensitivities, and reduce variation. Build and maintain parameter sets for new alloys, new hardware, and new machine configurations. Work with sensor data, log files, and monitoring systems to correlate in-process signatures with part quality. Develop statistical models, SPC controls, and trend analysis tools to ensure stable production behavior. Machine Development Focus Improve AM machine capability through hardware tuning, sensor integration, calibration routines, and control-system optimization. Lead machine troubleshooting, repair activities, and upgrades to improve uptime, repeatability, and print speeds. Conduct machine characterization using advanced tools and metrology equipment to map laser optics, powder behavior, thermal gradients, and recoater performance. Support machine-level IQ/OQ/MQ qualification and ongoing PM/maintenance strategies. Collaborate with equipment vendors and internal engineering teams on new machine features, experimental setups, and pilot systems. Drive automation, digital manufacturing, and data-acquisition improvements for machine performance monitoring. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education, Experience and Certifications Required Bachelor's degree in mechanical, materials science, aerospace, or related engineering discipline. Requires a minimum of 5 years of engineering experience after earning a bachelor's degree; relevant graduate project work can be applied toward requirements. Direct, hands-on experience with laser powder bed fusion (LPBF) additive manufacturing REQUIRED . Background in fabrication, prototyping, testing, or process development within an engineering environment. Ability to interpret engineering drawings, apply GD&T, and understand material properties data. Strong analytical and root-cause problem-solving skills. Comfortable working hands-on with machines, tools, test equipment, and mechanical assemblies. Skills and Abilities Preferred Build prep/simulation software like ANSYS Additive Suite, 3DXpert, or Dyndrite. Experience developing AM parameters, designing DOEs, or using statistical analysis tools (SPC, JMP, Minitab, Python, MATLAB). Experience troubleshooting AM machines, calibrating optics, repairing systems, or working with machine sensors and controls. Knowledge of DFAM principles, heat-treat processes, and additive-appropriate material behaviors (e.g., nickel alloys, titanium). Familiarity with CAD tools (NX, SolidWorks, or similar) and simulation/analysis workflows. Experience with IQ/OQ/MQ qualification approaches. Strong communication skills and ability to present findings to cross-functional teams. Experience in a fast-paced R&D or startup hardware environment. Why This Role Matters These engineers sit at the core of enabling scalable, high-performance additive manufacturing for the KARNO generator platform. Your work directly influences machine capability, part quality, manufacturability, and the timeline for scaling production of a first-of-its-kind power-generation technology. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements Ability to lift and/or move up to 50 pounds. Ability to travel domestically, as needed, by plane, automobile, etc. approximately 30% of the time, We are not accepting candidates who require sponsorship for this role at this time. Benefits: Medical Plans, with PPO or HDHP options Dental Plans, with buy-up option Vision Plan Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options Short Term Disability, paid for by the company Long Term Disability, paid for by the company Flexible Spending Accounts (FSA) Health Savings Account (HSA) 401k/Roth 401k Voluntary Accident Plans Voluntary Critical Illness Plans Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at .

Job Description Job Description As our Manager, Manufacturing Systems, you will lead our Manufacturing Systems team to develop, implement, execute, and support the utilization of manufacturing systems within Zoox's manufacturing operations and Field Service Engineering environment. The three main work scopes of the team are Manufacturing Execution System (MES) and its integration with the Enterprise Resource Planning (ERP), production management and line control systems, and the integration of manufacturing systems from the plant floor to the ERP. You are also responsible for working with other teams within the Manufacturing Engineering organization and cross-functional teams from other Manufacturing Operations Departments, Field Service Engineering, IT and Business Application, and Program Management to formulate short and long-term Manufacturing Systems strategies, including repair traceability and configuration control to support the execution of Zoox requirements. You will work with relevant leaders and teams to develop specific Manufacturing Systems Team roadmaps, project schedules, identify milestones, flag risks, estimate budgets, track costs, and clearly communicate ongoing progress. At Zoox, you will collaborate with a team of world-class engineers and technicians with diverse backgrounds in areas such as automotive and robotics, and you will have the chance to manifest your creativity and provide a high impact on the innovative products at Zoox. In this role, you will: Work with department leaders to translate the top-down corporate strategy and milestones into detailed concepts, roadmaps, timelines, and deliverables that are relevant to the Manufacturing Systems team's activities Develop short and long-term manufacturing and service systems strategies to meet the company's goals Interact with cross-functional leaders to convey Manufacturing systems requirements and work with them to define support resource requirements and tasks to support the achievement of the team's deliverables Represent the Manufacturing and Service Systems team in cross-functional project activities related to the Robot Configuration Management process and execution Collaborate with the IT and Business Applications team to ensure the Manufacturing and Service Systems interact effectively and efficiently with the enterprise-level systems across system planning, development, and execution phases. Manage the Manufacturing and Service Execution Systems Team to design, implement, execute, and standardize manufacturing systems and processes Lead the activities to design, develop, and implement manufacturing systems to enable the manufacturing of advanced components and vehicles, meeting Zoox's and the industry's manufacturing requirements Support day-to-day vehicle and component production operations at Zoox's manufacturing facilities Qualifications Bachelor's degree in a relevant area such as Computer Science or Engineering 15+ years of experience in manufacturing environments utilizing various manufacturing systems, specifically with Manufacturing Execution Systems, SCADA systems, and Line control systems such as PLCs, automation systems, industrial equipment, and integration of these systems in production. Experience in creating long-term and short-term business and technical strategies for implementing manufacturing systems to increase manufacturing efficiency and effectiveness. Strong technical knowledge and experience in Manufacturing Systems architecture, detailed systems functionality, incorporating business requirements into system requirements, overall discrete manufacturing processes, and production order execution. Experience in implementing and executing SAP ME/Mii/PCo, Inductive Automation Ignition SCADA system, Kepware OPC, Siemens PLCs, and industrial automation devices Bonus Qualifications M.S. in Computer Science, Engineering, or a similar field Deep technical knowledge and understanding of SAP ME/Mii/PCo systems and the integration of MES to SAP S4/HANA ERP system modules, specifically PP, PM, EAM, eWM, and QM Significant relevant experience in the automotive industry and/or discrete manufacturing industries, and hands-on experience in a production environment Strong understanding of the architecture and operations of modern manufacturing production lines There are three major components to compensation for this position: salary, Amazon Restricted Stock Units (RSUs), and Zoox Stock Appreciation Rights. A sign-on bonus may be offered as part of the compensation package. The listed range applies only to the base salary. Compensation will vary based on geographic location and level. Leveling, as well as positioning within a level, is determined by a range of factors, including, but not limited to, a candidate's relevant years of experience, domain knowledge, and interview performance. The salary range listed in this posting is representative of the range of levels Zoox is considering for this position. Zoox also offers a comprehensive package of benefits, including paid time off (e.g. sick leave, vacation, bereavement), unpaid time off, Zoox Stock Appreciation Rights, Amazon RSUs, health insurance, long-term care insurance, long-term and short-term disability insurance, and life insurance. About Zoox Zoox is developing the first ground-up, fully autonomous vehicle fleet and the supporting ecosystem required to bring this technology to market. Sitting at the intersection of robotics, machine learning, and design, Zoox aims to provide the next generation of mobility-as-a-service in urban environments. We're looking for top talent that shares our passion and wants to be part of a fast-moving and highly execution-oriented team. Follow us on LinkedIn Accommodations If you need an accommodation to participate in the application or interview process please reach out to or your assigned recruiter. A Final Note: You do not need to match every listed expectation to apply for this position. Here at Zoox, we know that diverse perspectives foster the innovation we need to be successful, and we are committed to building a team that encompasses a variety of backgrounds, experiences, and skills. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Description Description: Please share submission details to RM notes: Vision & Technology project. An ideal candidate should be experienced with machine learning and vision systems using PLC. 5 years of experience in Machine Vision & Edge AI development. Proficiency in Python and C Who we re looking for s Manufacturing Project Innovation Center (Manufacturing Innovation) Advanced Technology Department is looking for a passionate and highly motivated Advanced Technology Engineer The primary responsibility of this role is: Model Development & Training Speed Design and implement computer vision models for defect detection, segmentation, and classification. Accelerate training cycles using synthetic data, active learning, and domain randomization to cover rare defects and specification variance. Production Deployment Package models and services using Docker and manage deployments through Kubernetes or equivalent orchestration tools. Implement version control, rollback strategies, and observability for latency, drift, and false-positive/false-negative metrics. Edge Optimization Optimize inference for edge and embedded hardware (e.g., NVIDIA Jetson, Client accelerators) to meet strict real-time latency requirements for moving-line inspection. Ensure consistent performance under varying lighting, optics, and surface conditions. Integration with Manufacturing Systems Integrate vision systems with PLCs, encoders, triggers, and industrial networks using OPC-UA, MQTT, and REST protocols. Align deployments with s ICS , GALC, and TVIP architecture standards for plant-level connectivity and reliability. Data Strategy & Quality Control Lead data collection campaigns, manage annotation workflows, and establish quality gates for model validation. Utilize synthetic data pipelines and augmentation techniques to improve model robustness and reduce training time. Reliability & Sustainment Ensure uptime and availability targets are met through proactive monitoring, calibration (MSA), and backup/restore processes. Implement drift detection, audit false-out risks, and perform root cause analysis for inspection failures. Reporting to the Manufacturing Innovation Manager, the person in this role will support the Production Engineering Division and SOAR Group s objective to improve manufacturing competitiveness. What you ll be doing Develop and deploy production-grade machine learning models for industrial vision inspection systems across manufacturing lines. Accelerating model development and training using advanced techniques such as synthetic data generation, ensuring high accuracy and generalization, and delivering containerized software optimized for edge hardware Development of new technologies for PE and Manufacturing competitiveness improvement Lead and manage projects from concept to launch for new technology first introduction to manufacturing including creating schedules, establishing punch lists, and meeting established due dates and milestones. Search for innovative solutions, test them in a manufacturing setting, and develop business case justification to gain approval to purchase if trials prove successful. Close collaboration between both internal and external groups across including North American Manufacturing Centers ( NAMCs), Motor Corp (TMC), Technical Center (TTC) , PE support shops, IT ( One Tech) teams, automation teams & Plano divisions, to ensure quality and to integrate robust AI solutions into high-volume manufacturing environments. What you bring Ability to travel to all North American Manufacturing Centers (NAMC s) including Canada and Mexico; and to Motor Corp (TMC) Japan Experience with project management including writing detailed scope of work, creating schedules, managing vendors/contractors, and providing regular status updates (Y/N text follow up) Bachelor s degree in Electrical Engineering, Mechanical Engineering, Computer Science, Information Technology or related field. 5 years of experience in industrial machine vision and edge AI deployment. Proficiency in Python and C with strong knowledge of ML frameworks (PyTorch, TensorFlow). Hands-on experience with containerization (Docker) and orchestration (Kubernetes). Familiarity with ONNX Runtime, TensorRT, and optimization for embedded hardware. Experience integrating vision systems with PLCs and industrial protocols (OPC-UA, MQTT). Experience managing the full model lifecycle: data collection, labeling, validation, rollout, monitoring, and retraining Experience in areas such as object detection, classification, segmentation and familiarity with mainstream object detection and semantic/instance segmentation models. Familiarity with industrial cameras, lighting, and optics, including trigger-based image capture Experience balancing inspection accuracy with false positives vs flow-out risk in quality Requirements: Desired / Preferred Master s Degree in Engineering or Advanced Degree in related fields Academic research experience in new technology Project management work involving internal and external parties 6 months or greater Experience deploying equipment including establishing RJ, PFMEA, and quality control plan Experience deploying automotive production equipment Experience in Robotics to include operation, teaching, maintenance, and safety Expertise in synthetic data generation techniques (GANs, VAEs, NeRFs, Blender) and domain randomization for model generalization. Experience with high-speed inline inspection systems and vision-based process control. Knowledge of IIoT data pipelines and messaging standards. Strong understanding of calibration, measurement system analysis (MSA), and quality-critical inspection requirements. Key Competencies Ability to deliver production-ready AI solutions under strict timelines. Strong problem-solving and cross-functional collaboration skills. Commitment to quality, reliability, and continuous improvement in manufacturing environments

Job Description Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. This is an onsite role only. Job Purpose and Overview Step into the world of metal additive manufacturing for the KARNO generator , where advanced laser powder-bed fusion meets real engineering challenge. Engineers in this group work across machine behavior, process optimization, material performance, data analytics, and hardware development to ensure high-quality, repeatable production using metal laser powder-bed fusion systems. If you're the kind of engineer who enjoys digging into machine behavior, fine-tuning laser strategies, studying how materials evolve layer by layer, and pushing metal AM systems to run cleaner, faster, and more consistently, this team is built for you. The work is hands-on, data-driven, and central to scaling a first-of-its-kind distributed power technology. In this role, you'll move across the entire additive manufacturing ecosystem. You'll investigate how machine settings influence melt pools, porosity, and microstructure, and you'll design controlled experiments to refine parameters and boost repeatability. A big part of the job involves troubleshooting machine quirks, interpreting sensor data, and making sense of real-time process feedback. You'll also be working closely with design, materials, and hardware teams to bring complex AM components from early prototypes into reliable production. Along the way, you'll help build the systems, standards, and workflows that turn metal AM into a high-trust, high-reliability manufacturing process for power-generation hardware. Duties and Responsibilities: Parameter Development Focus Identify and optimize critical-to-function (CTF) parameters that drive mechanical performance, density, porosity, microstructure, and repeatability. Design and execute experiments (DOE) to map the process window, understand sensitivities, and reduce variation. Build and maintain parameter sets for new alloys, new hardware, and new machine configurations. Work with sensor data, log files, and monitoring systems to correlate in-process signatures with part quality. Develop statistical models, SPC controls, and trend analysis tools to ensure stable production behavior. Machine Development Focus Improve AM machine capability through hardware tuning, sensor integration, calibration routines, and control-system optimization. Lead machine troubleshooting, repair activities, and upgrades to improve uptime, repeatability, and print speeds. Conduct machine characterization using advanced tools and metrology equipment to map laser optics, powder behavior, thermal gradients, and recoater performance. Support machine-level IQ/OQ/MQ qualification and ongoing PM/maintenance strategies. Collaborate with equipment vendors and internal engineering teams on new machine features, experimental setups, and pilot systems. Drive automation, digital manufacturing, and data-acquisition improvements for machine performance monitoring. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education, Experience and Certifications Required Bachelor's degree in mechanical, materials science, aerospace, or related engineering discipline. Requires a minimum of 5 years of engineering experience after earning a bachelor's degree; relevant graduate project work can be applied toward requirements. Direct, hands-on experience with laser powder bed fusion (LPBF) additive manufacturing REQUIRED . Background in fabrication, prototyping, testing, or process development within an engineering environment. Ability to interpret engineering drawings, apply GD&T, and understand material properties data. Strong analytical and root-cause problem-solving skills. Comfortable working hands-on with machines, tools, test equipment, and mechanical assemblies. Skills and Abilities Preferred Build prep/simulation software like ANSYS Additive Suite, 3DXpert, or Dyndrite. Experience developing AM parameters, designing DOEs, or using statistical analysis tools (SPC, JMP, Minitab, Python, MATLAB). Experience troubleshooting AM machines, calibrating optics, repairing systems, or working with machine sensors and controls. Knowledge of DFAM principles, heat-treat processes, and additive-appropriate material behaviors (e.g., nickel alloys, titanium). Familiarity with CAD tools (NX, SolidWorks, or similar) and simulation/analysis workflows. Experience with IQ/OQ/MQ qualification approaches. Strong communication skills and ability to present findings to cross-functional teams. Experience in a fast-paced R&D or startup hardware environment. Why This Role Matters These engineers sit at the core of enabling scalable, high-performance additive manufacturing for the KARNO generator platform. Your work directly influences machine capability, part quality, manufacturability, and the timeline for scaling production of a first-of-its-kind power-generation technology. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements Ability to lift and/or move up to 50 pounds. Ability to travel domestically, as needed, by plane, automobile, etc. approximately 30% of the time, Benefits: Medical Plans, with PPO or HDHP options Dental Plans, with buy-up option Vision Plan Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options Short Term Disability, paid for by the company Long Term Disability, paid for by the company Flexible Spending Accounts (FSA) Health Savings Account (HSA) 401k/Roth 401k Voluntary Accident Plans Voluntary Critical Illness Plans Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at .