it job board logo
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
  • Recruiting? Post a job
  • Sign in
  • Sign up
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

9 jobs found

Email me jobs like this
Refine Search
Current Search
automation engineer ii manufacturing equipment
Sr. Automation Engineer
Baker Group Ankeny, Iowa
Job Description Job Description Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the "Client for Life" concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power. Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc. Uploading, downloading, and modification of control software and programs. IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers. Create and troubleshoot automation networks and communication protocols. Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments. Map control points into supervisory controller and add alarms and history extensions to supervisory controller points. Map control points into the graphical front end and link points to graphics. Create Automation System graphics and dashboards that tie into a SCADA system. Understand construction and project schedules, and manage QA/QC checklists and commissioning logs Interpret Sequence Of Operations (SOO) and apply to program logic. Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming. Manage medium to large projects. Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers Assist with Tier III Business Development Pursuits. Assist with the development of Core Process and Standards for the Automation Business Unit. Travel to job sites is required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Bachelor's degree in engineering related field or equivalent work experience 7+ years of Automation related field and engineering experience Knowledge of common Microsoft Office applications (Excel, Word, Outlook) Knowledge of Microsoft SQL or other database applications preferred Knowledge of Ethernet and serial network communication formats and hardware configurations Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices) Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Ability to perform independently. Strong interpersonal skills with effective verbal and written communication. Ability to follow instructions and meet commitments. Value and support company Core Focus and Values. Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels. Prioritize and balance long-term goals with immediate tasks. Ability to listen effectively, value other's opinions of and acknowledge contributions. Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers. Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY Prolonged periods of sitting at a desk and working on a computer Must be able to lift 75 pounds occasionally May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS Laptop PC Electronic Multimeter Magnehelic RS-485 and RS-232 Serial Adapters Hand tools/Light power tools Product Manufacturer Software Ladders and Lifts Oscilloscope Wireshark Procore, BIM 360, and other Construction Management Softwares Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.
11/19/2026
Full time
Job Description Job Description Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the "Client for Life" concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power. Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc. Uploading, downloading, and modification of control software and programs. IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers. Create and troubleshoot automation networks and communication protocols. Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments. Map control points into supervisory controller and add alarms and history extensions to supervisory controller points. Map control points into the graphical front end and link points to graphics. Create Automation System graphics and dashboards that tie into a SCADA system. Understand construction and project schedules, and manage QA/QC checklists and commissioning logs Interpret Sequence Of Operations (SOO) and apply to program logic. Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming. Manage medium to large projects. Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers Assist with Tier III Business Development Pursuits. Assist with the development of Core Process and Standards for the Automation Business Unit. Travel to job sites is required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Bachelor's degree in engineering related field or equivalent work experience 7+ years of Automation related field and engineering experience Knowledge of common Microsoft Office applications (Excel, Word, Outlook) Knowledge of Microsoft SQL or other database applications preferred Knowledge of Ethernet and serial network communication formats and hardware configurations Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices) Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Ability to perform independently. Strong interpersonal skills with effective verbal and written communication. Ability to follow instructions and meet commitments. Value and support company Core Focus and Values. Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels. Prioritize and balance long-term goals with immediate tasks. Ability to listen effectively, value other's opinions of and acknowledge contributions. Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers. Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY Prolonged periods of sitting at a desk and working on a computer Must be able to lift 75 pounds occasionally May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS Laptop PC Electronic Multimeter Magnehelic RS-485 and RS-232 Serial Adapters Hand tools/Light power tools Product Manufacturer Software Ladders and Lifts Oscilloscope Wireshark Procore, BIM 360, and other Construction Management Softwares Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.
Senior Onsite IT Support Analyst
CYNET Systems Crowley, Texas
Pay Range: $35.00hr - $40.00hr Job Overview: The Onsite Support Analyst serves as a desktop support expert responsible for computer hardware, software (location specific or global), and peripherals. The candidate acts as the second point of escalation for the resolution of desktop or laptop related incidents, service requests, and connectivity issues. Requirements: Minimum 5 years of Onsite Support Analyst experience. Experience imaging and deploying devices using Microsoft Intune. Strong troubleshooting skills across hardware, software, operating systems, and networking. Experience supporting business-critical applications. Ability to work both independently and as part of a team. Strong verbal and written communication skills and excellent customer service skills. CompTIA A+ Certification required. Network-related certification or knowledge (Network+ preferred). Nice to Have: Previous IT support experience within a manufacturing environment. Experience supporting CAD applications and engineering software. Leadership or team lead experience. Exposure to AI technologies, tools, or automation initiatives. Additional technical certifications such as Network+, Security+, or related certifications. Junior Level Role Responsibilities: Provide second-line investigation and diagnosis. Resolve and close incidents and service requests as per help desk procedures and allocated timelines. Escalate unresolved incidents and service requests within agreed timescales. Log incident and service request details per help desk procedures. Communicate with customer regarding incident progress. Ensure tickets are updated at all times until issues are resolved. Conduct customer satisfaction callbacks and surveys. Complete GET IT training for On-Site Support Analysts. Comply with Quality, Health, Safety and Environment policies and IT policies. Liaise with customers, other IT support groups and third-party providers when necessary. Perform staging of PCs. Maintain Global Asset Management database with updates related to the assigned hardware. Perform Install, Move, Add and Change tasks. Perform hardware and software maintenance and support. Participate in IT team activities and follow up on objectives and key performance objectives. Level 1 Role Responsibilities: Perform Junior Level responsibilities above. Troubleshoot and resolve PC incidents and VIP requests. Liaise with third-party suppliers for hardware repair. Assist with SCSI on IT security issues and virus elimination. Assist local Server Team when server maintenance is required. Assist in infrastructure setup and renovation projects at location including network devices, Lenel PACs, CCTV, servers, PABX, and Lync Systems. Level 2 Role Responsibilities: Perform Level 1 responsibilities above. Work with Distributed Services, Systems, Network Support, and Event Management teams. Coordinate spare asset inventory. Maintain asset management. Assist local Network Team when network equipment maintenance is required. Present to and educate customers on IT solutions, methods, and tools to increase their efficiency. Organize and schedule UseIT training in location to match key performance objectives requirements. Participate in GeoMarket projects to accomplish common objectives. Participate as a key person in IT Domain structure. Supervise suppliers performing maintenance and IMAC of IT equipment. Level 3 Role Responsibilities: Perform Level 2 responsibilities above. Channel requests for help to the appropriate functions for resolution, monitor resolution activity, and inform customers of progress. Work with Enterprise Services teams to deploy upgrades to customer servers, LANs, WANs, and wireless networks. Mentor junior members on the team. Manage small, low-risk IT projects at location. Lead GeoMarket projects to accomplish common objectives. Prepare to take on additional responsibilities such as Security Champion, LDAP Champion, or Wellsite Connectivity Champion. Perform regular IT hardware disposal following the Fixed Asset Disposal Procedure. Ensure process consistency through calls, group meetings, and workshops. Listen to, understand, and interpret customer requirements to propose solutions that enable the business to be more efficient. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/19/2026
Full time
Pay Range: $35.00hr - $40.00hr Job Overview: The Onsite Support Analyst serves as a desktop support expert responsible for computer hardware, software (location specific or global), and peripherals. The candidate acts as the second point of escalation for the resolution of desktop or laptop related incidents, service requests, and connectivity issues. Requirements: Minimum 5 years of Onsite Support Analyst experience. Experience imaging and deploying devices using Microsoft Intune. Strong troubleshooting skills across hardware, software, operating systems, and networking. Experience supporting business-critical applications. Ability to work both independently and as part of a team. Strong verbal and written communication skills and excellent customer service skills. CompTIA A+ Certification required. Network-related certification or knowledge (Network+ preferred). Nice to Have: Previous IT support experience within a manufacturing environment. Experience supporting CAD applications and engineering software. Leadership or team lead experience. Exposure to AI technologies, tools, or automation initiatives. Additional technical certifications such as Network+, Security+, or related certifications. Junior Level Role Responsibilities: Provide second-line investigation and diagnosis. Resolve and close incidents and service requests as per help desk procedures and allocated timelines. Escalate unresolved incidents and service requests within agreed timescales. Log incident and service request details per help desk procedures. Communicate with customer regarding incident progress. Ensure tickets are updated at all times until issues are resolved. Conduct customer satisfaction callbacks and surveys. Complete GET IT training for On-Site Support Analysts. Comply with Quality, Health, Safety and Environment policies and IT policies. Liaise with customers, other IT support groups and third-party providers when necessary. Perform staging of PCs. Maintain Global Asset Management database with updates related to the assigned hardware. Perform Install, Move, Add and Change tasks. Perform hardware and software maintenance and support. Participate in IT team activities and follow up on objectives and key performance objectives. Level 1 Role Responsibilities: Perform Junior Level responsibilities above. Troubleshoot and resolve PC incidents and VIP requests. Liaise with third-party suppliers for hardware repair. Assist with SCSI on IT security issues and virus elimination. Assist local Server Team when server maintenance is required. Assist in infrastructure setup and renovation projects at location including network devices, Lenel PACs, CCTV, servers, PABX, and Lync Systems. Level 2 Role Responsibilities: Perform Level 1 responsibilities above. Work with Distributed Services, Systems, Network Support, and Event Management teams. Coordinate spare asset inventory. Maintain asset management. Assist local Network Team when network equipment maintenance is required. Present to and educate customers on IT solutions, methods, and tools to increase their efficiency. Organize and schedule UseIT training in location to match key performance objectives requirements. Participate in GeoMarket projects to accomplish common objectives. Participate as a key person in IT Domain structure. Supervise suppliers performing maintenance and IMAC of IT equipment. Level 3 Role Responsibilities: Perform Level 2 responsibilities above. Channel requests for help to the appropriate functions for resolution, monitor resolution activity, and inform customers of progress. Work with Enterprise Services teams to deploy upgrades to customer servers, LANs, WANs, and wireless networks. Mentor junior members on the team. Manage small, low-risk IT projects at location. Lead GeoMarket projects to accomplish common objectives. Prepare to take on additional responsibilities such as Security Champion, LDAP Champion, or Wellsite Connectivity Champion. Perform regular IT hardware disposal following the Fixed Asset Disposal Procedure. Ensure process consistency through calls, group meetings, and workshops. Listen to, understand, and interpret customer requirements to propose solutions that enable the business to be more efficient. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Senior Onsite IT Support Analyst
CYNET Systems Crowley, Texas
Pay Range: $35.00hr - $40.00hr Job Overview: The Onsite Support Analyst serves as a desktop support expert responsible for computer hardware, software (location specific or global), and peripherals. The candidate acts as the second point of escalation for the resolution of desktop or laptop related incidents, service requests, and connectivity issues. Requirements: Minimum 5 years of Onsite Support Analyst experience. Experience imaging and deploying devices using Microsoft Intune. Strong troubleshooting skills across hardware, software, operating systems, and networking. Experience supporting business-critical applications. Ability to work both independently and as part of a team. Strong verbal and written communication skills and excellent customer service skills. CompTIA A+ Certification required. Network-related certification or knowledge (Network+ preferred). Nice to Have: Previous IT support experience within a manufacturing environment. Experience supporting CAD applications and engineering software. Leadership or team lead experience. Exposure to AI technologies, tools, or automation initiatives. Additional technical certifications such as Network+, Security+, or related certifications. Junior Level Role Responsibilities: Provide second-line investigation and diagnosis. Resolve and close incidents and service requests as per help desk procedures and allocated timelines. Escalate unresolved incidents and service requests within agreed timescales. Log incident and service request details per help desk procedures. Communicate with customer regarding incident progress. Ensure tickets are updated at all times until issues are resolved. Conduct customer satisfaction callbacks and surveys. Complete GET IT training for On-Site Support Analysts. Comply with Quality, Health, Safety and Environment policies and IT policies. Liaise with customers, other IT support groups and third-party providers when necessary. Perform staging of PCs. Maintain Global Asset Management database with updates related to the assigned hardware. Perform Install, Move, Add and Change tasks. Perform hardware and software maintenance and support. Participate in IT team activities and follow up on objectives and key performance objectives. Level 1 Role Responsibilities: Perform Junior Level responsibilities above. Troubleshoot and resolve PC incidents and VIP requests. Liaise with third-party suppliers for hardware repair. Assist with SCSI on IT security issues and virus elimination. Assist local Server Team when server maintenance is required. Assist in infrastructure setup and renovation projects at location including network devices, Lenel PACs, CCTV, servers, PABX, and Lync Systems. Level 2 Role Responsibilities: Perform Level 1 responsibilities above. Work with Distributed Services, Systems, Network Support, and Event Management teams. Coordinate spare asset inventory. Maintain asset management. Assist local Network Team when network equipment maintenance is required. Present to and educate customers on IT solutions, methods, and tools to increase their efficiency. Organize and schedule UseIT training in location to match key performance objectives requirements. Participate in GeoMarket projects to accomplish common objectives. Participate as a key person in IT Domain structure. Supervise suppliers performing maintenance and IMAC of IT equipment. Level 3 Role Responsibilities: Perform Level 2 responsibilities above. Channel requests for help to the appropriate functions for resolution, monitor resolution activity, and inform customers of progress. Work with Enterprise Services teams to deploy upgrades to customer servers, LANs, WANs, and wireless networks. Mentor junior members on the team. Manage small, low-risk IT projects at location. Lead GeoMarket projects to accomplish common objectives. Prepare to take on additional responsibilities such as Security Champion, LDAP Champion, or Wellsite Connectivity Champion. Perform regular IT hardware disposal following the Fixed Asset Disposal Procedure. Ensure process consistency through calls, group meetings, and workshops. Listen to, understand, and interpret customer requirements to propose solutions that enable the business to be more efficient. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/19/2026
Full time
Pay Range: $35.00hr - $40.00hr Job Overview: The Onsite Support Analyst serves as a desktop support expert responsible for computer hardware, software (location specific or global), and peripherals. The candidate acts as the second point of escalation for the resolution of desktop or laptop related incidents, service requests, and connectivity issues. Requirements: Minimum 5 years of Onsite Support Analyst experience. Experience imaging and deploying devices using Microsoft Intune. Strong troubleshooting skills across hardware, software, operating systems, and networking. Experience supporting business-critical applications. Ability to work both independently and as part of a team. Strong verbal and written communication skills and excellent customer service skills. CompTIA A+ Certification required. Network-related certification or knowledge (Network+ preferred). Nice to Have: Previous IT support experience within a manufacturing environment. Experience supporting CAD applications and engineering software. Leadership or team lead experience. Exposure to AI technologies, tools, or automation initiatives. Additional technical certifications such as Network+, Security+, or related certifications. Junior Level Role Responsibilities: Provide second-line investigation and diagnosis. Resolve and close incidents and service requests as per help desk procedures and allocated timelines. Escalate unresolved incidents and service requests within agreed timescales. Log incident and service request details per help desk procedures. Communicate with customer regarding incident progress. Ensure tickets are updated at all times until issues are resolved. Conduct customer satisfaction callbacks and surveys. Complete GET IT training for On-Site Support Analysts. Comply with Quality, Health, Safety and Environment policies and IT policies. Liaise with customers, other IT support groups and third-party providers when necessary. Perform staging of PCs. Maintain Global Asset Management database with updates related to the assigned hardware. Perform Install, Move, Add and Change tasks. Perform hardware and software maintenance and support. Participate in IT team activities and follow up on objectives and key performance objectives. Level 1 Role Responsibilities: Perform Junior Level responsibilities above. Troubleshoot and resolve PC incidents and VIP requests. Liaise with third-party suppliers for hardware repair. Assist with SCSI on IT security issues and virus elimination. Assist local Server Team when server maintenance is required. Assist in infrastructure setup and renovation projects at location including network devices, Lenel PACs, CCTV, servers, PABX, and Lync Systems. Level 2 Role Responsibilities: Perform Level 1 responsibilities above. Work with Distributed Services, Systems, Network Support, and Event Management teams. Coordinate spare asset inventory. Maintain asset management. Assist local Network Team when network equipment maintenance is required. Present to and educate customers on IT solutions, methods, and tools to increase their efficiency. Organize and schedule UseIT training in location to match key performance objectives requirements. Participate in GeoMarket projects to accomplish common objectives. Participate as a key person in IT Domain structure. Supervise suppliers performing maintenance and IMAC of IT equipment. Level 3 Role Responsibilities: Perform Level 2 responsibilities above. Channel requests for help to the appropriate functions for resolution, monitor resolution activity, and inform customers of progress. Work with Enterprise Services teams to deploy upgrades to customer servers, LANs, WANs, and wireless networks. Mentor junior members on the team. Manage small, low-risk IT projects at location. Lead GeoMarket projects to accomplish common objectives. Prepare to take on additional responsibilities such as Security Champion, LDAP Champion, or Wellsite Connectivity Champion. Perform regular IT hardware disposal following the Fixed Asset Disposal Procedure. Ensure process consistency through calls, group meetings, and workshops. Listen to, understand, and interpret customer requirements to propose solutions that enable the business to be more efficient. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Applications Engineer II
Medical Manufacturing Technologies LLC West Palm Beach, Florida
Job Description Job Description Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PI1a2fa027d5a6-8688
11/19/2026
Full time
Job Description Job Description Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PI1a2fa027d5a6-8688
Applications Engineer II
Medical Manufacturing Technologies LLC West Palm Beach, Florida
Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PIe5-
11/18/2026
Full time
Applications Engineer II West Palm Beach, FL Full-Time Medical Device Manufacturing Help Build the Technology Behind Life-Saving Medical Devices Are you an engineer who enjoys solving complex technical challenges, working directly with customers, and turning innovative ideas into real-world manufacturing solutions? MMT is seeking an Applications Engineer II to join our growing team in West Palm Beach, Florida. In this role, you'll serve as a technical expert supporting advanced catheter manufacturing processes and equipment used to produce minimally invasive medical devices that improve and save lives. You'll work hands-on in our Applications Lab, collaborate with customers around the world, and partner with Engineering, R&D, and Production teams to develop cutting-edge manufacturing solutions. If you thrive in a fast-paced environment where no two projects are the same, this is an opportunity to make a direct impact on innovative medical technologies. What You'll Do As an Applications Engineer II, you will: Partner with customers to understand manufacturing challenges and recommend process and equipment solutions. Conduct proof-of-concept testing and process development in our Applications Lab. Develop, validate, and optimize manufacturing processes for catheter and medical device applications. Troubleshoot technical and process-related challenges and perform root cause analysis. Program, test, and validate equipment prior to customer acceptance and shipment. Prepare technical reports and present recommendations to customers and internal stakeholders. Collaborate with Engineering and R&D teams to improve machine capabilities, tooling, and automation. Train customers and internal teams on equipment operation, process control, and best practices. Support continuous improvement initiatives focused on quality, productivity, and innovation. What We're Looking For Required Qualifications Bachelor's degree in Mechanical, Electrical, Aerospace Engineering, or a related engineering discipline. 3+ years of experience in applications engineering, process engineering, manufacturing engineering, or a related technical role. Strong analytical, troubleshooting, and problem-solving skills. Ability to communicate technical information effectively to both technical and non-technical audiences. Experience reading and interpreting engineering drawings, schematics, and technical documentation. Ability to travel domestically and internationally up to 10-20%. Valid U.S. Passport or ability to obtain one. Preferred Qualifications Experience within medical device manufacturing. Experience with catheter manufacturing processes such as tipping, flaring, bonding, drilling, or related technologies. Knowledge of process validation, DOE, capability analysis, and statistical methods. Experience with CAD software such as AutoCAD, Inventor, SolidWorks, or similar. Familiarity with ISO 13485, FDA Quality System Regulations, and regulated manufacturing environments. Knowledge of polymers and materials used in catheter and tubing applications, including Pebax, Nylon, PTFE, and FEP. Why Join MMT? At MMT, you'll work alongside industry experts developing advanced manufacturing technologies that support some of the world's leading medical device companies. We offer: Meaningful work that contributes to life-saving medical innovations. Exposure to cutting-edge manufacturing technologies and automation. Opportunities to collaborate directly with customers and industry leaders. Career growth in a rapidly evolving, high-tech industry. A collaborative, team-oriented environment where innovation is encouraged. This role combines office, laboratory, and production-floor work. You'll have the opportunity to work hands-on with advanced manufacturing equipment, precision tooling, and process development projects while collaborating with teams across multiple disciplines. Occasional travel to customer sites is required. MMT offers a comprehensive benefits package, including: 401(k) retirement plan with employer match Paid time off and paid parental leave Tuition reimbursement and professional development opportunities Annual bonus plan eligibility Dependent scholarship program for children, grandchildren, or legal wards Ready to Make an Impact? If you're passionate about engineering, innovation, and helping bring life-saving medical technologies to market, we'd love to hear from you. Apply today and help shape the future of medical device manufacturing with MMT. Medical Manufacturing Technologies (MMT) is an equal opportunity employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. MMT is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need assistance or accommodation during the application or interview process, please contact us. MMT participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the United States. PIe5-
Programmer II
Global Finishing Solutions, LLC. Osseo, Wisconsin
Job Description Job Description Code the Machine. Power the Future. The Programmer II is at the heart of GFS's automation engine. This role doesn't just write code-it brings custom-built machines to life. As a core member of the Electrical Engineering team, the Programmer II designs, builds, and unleashes advanced control programs that power high-impact, customer-driven automation solutions. Working side-by-side with engineers and innovators, this position transforms complex requirements into fast, reliable, and scalable systems. If you thrive on solving tough problems, pushing technology forward, and seeing your work move real equipment in the real world, this role puts you where it all happens. What Success Looks Like Architect and unleash advanced control systems-ladder logic, PLC, and PC-based platforms-that power GFS's most complex automation. Set the standard for power, wiring, and control design, executing fast, clean, and efficient solutions under tight timelines. Monitor, diagnose, and optimize live equipment remotely, keeping systems running and customers moving. Engineer end-to-end automation solutions by tightly integrating hardware and software into cohesive, high-performance systems. Translate raw equipment requests into clear, actionable design specifications that drive flawless execution. Design intuitive, operator-friendly control systems, including HMIs and touchscreen interfaces, that elevate the user experience. Stay on the cutting edge of industrial controls and their application within the finishing industry. Step in when it matters most-supporting commissioning, preventive maintenance, emergency response, warranty, repair, and technical direction for industrial electrical systems. Lead and collaborate across disciplines to solve tough challenges, improve cost and quality, and keep products on track and on time. Qualifications That Shine Education & Experience: We're looking for candidates with an Associate's Degree and 7-12 years of hands-on experience, a Bachelor's Degree with 3-8 years, or a Master's Degree with 0-6 years-your skills and real-world impact matter most. Technical Expertise: Demonstrated mastery of core products, technologies, and industry standards, with the ability to apply knowledge to design, troubleshoot, and optimize advanced control and automation systems. Problem-Solving & Innovation: Strong analytical and critical thinking skills, capable of translating complex requirements into practical, high-performance solutions. Collaboration & Leadership: Comfortable working cross-functionally, leading initiatives, and providing guidance to ensure projects meet quality, cost, and schedule goals. Continuous Learning: Passion for staying ahead of industry trends, embracing new technologies, and applying best practices to keep systems and solutions at the cutting edge. Why You'll Love Working Here Competitive pay + performance incentives Full suite of benefits: medical, dental, vision, life, disability 401(k) with profit sharing-when the company wins, you share the win Career development opportunities in a growing organization A supportive team environment where collaboration and customer success come first Transparent Rewards At GFS, we recognize the dedication behind every role and ensure that our compensation reflects both your impact and our shared success. Pay Range: $71,365 - $89,836 per year based on your experience, skills, and qualifications. Bonus Eligibility: This position is eligible for an annual individual incentive based on company performance. Maximum bonus amounts may vary depending on role. Benefits: Eligible for standard company benefits, including health, dental, and vision insurance, 401(k) retirement plan with company match, paid time off, and other employee programs. More detailed information is available at 2026 GFS Benefits. Actual compensation will be determined by factors including experience, education, certifications, skill level, and market conditions. For remote or hybrid positions, the listed pay range applies to applicants in the specified location. About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn Equal Opportunity Employer GFS is proud to provide equal employment opportunities to all applicants . We welcome candidates of all backgrounds and do not discriminate based on race, religion, color, sex, age, national origin, disability, sexual orientation, gender identity, veteran status, or any other status protected by law. Employment offers are subject to successful completion of pre-employment drug screening and physicals, consistent with applicable laws. Note to recruiters: GFS only works with agencies that have signed a contract with our HR team. Resumes sent directly to hiring managers without a prior agreement are considered unsolicited and the property of GFS. Placement fees will not be paid without a formal contract. Compensation details: 6 Yearly Salary PIb2fddd42f5-
11/17/2026
Full time
Job Description Job Description Code the Machine. Power the Future. The Programmer II is at the heart of GFS's automation engine. This role doesn't just write code-it brings custom-built machines to life. As a core member of the Electrical Engineering team, the Programmer II designs, builds, and unleashes advanced control programs that power high-impact, customer-driven automation solutions. Working side-by-side with engineers and innovators, this position transforms complex requirements into fast, reliable, and scalable systems. If you thrive on solving tough problems, pushing technology forward, and seeing your work move real equipment in the real world, this role puts you where it all happens. What Success Looks Like Architect and unleash advanced control systems-ladder logic, PLC, and PC-based platforms-that power GFS's most complex automation. Set the standard for power, wiring, and control design, executing fast, clean, and efficient solutions under tight timelines. Monitor, diagnose, and optimize live equipment remotely, keeping systems running and customers moving. Engineer end-to-end automation solutions by tightly integrating hardware and software into cohesive, high-performance systems. Translate raw equipment requests into clear, actionable design specifications that drive flawless execution. Design intuitive, operator-friendly control systems, including HMIs and touchscreen interfaces, that elevate the user experience. Stay on the cutting edge of industrial controls and their application within the finishing industry. Step in when it matters most-supporting commissioning, preventive maintenance, emergency response, warranty, repair, and technical direction for industrial electrical systems. Lead and collaborate across disciplines to solve tough challenges, improve cost and quality, and keep products on track and on time. Qualifications That Shine Education & Experience: We're looking for candidates with an Associate's Degree and 7-12 years of hands-on experience, a Bachelor's Degree with 3-8 years, or a Master's Degree with 0-6 years-your skills and real-world impact matter most. Technical Expertise: Demonstrated mastery of core products, technologies, and industry standards, with the ability to apply knowledge to design, troubleshoot, and optimize advanced control and automation systems. Problem-Solving & Innovation: Strong analytical and critical thinking skills, capable of translating complex requirements into practical, high-performance solutions. Collaboration & Leadership: Comfortable working cross-functionally, leading initiatives, and providing guidance to ensure projects meet quality, cost, and schedule goals. Continuous Learning: Passion for staying ahead of industry trends, embracing new technologies, and applying best practices to keep systems and solutions at the cutting edge. Why You'll Love Working Here Competitive pay + performance incentives Full suite of benefits: medical, dental, vision, life, disability 401(k) with profit sharing-when the company wins, you share the win Career development opportunities in a growing organization A supportive team environment where collaboration and customer success come first Transparent Rewards At GFS, we recognize the dedication behind every role and ensure that our compensation reflects both your impact and our shared success. Pay Range: $71,365 - $89,836 per year based on your experience, skills, and qualifications. Bonus Eligibility: This position is eligible for an annual individual incentive based on company performance. Maximum bonus amounts may vary depending on role. Benefits: Eligible for standard company benefits, including health, dental, and vision insurance, 401(k) retirement plan with company match, paid time off, and other employee programs. More detailed information is available at 2026 GFS Benefits. Actual compensation will be determined by factors including experience, education, certifications, skill level, and market conditions. For remote or hybrid positions, the listed pay range applies to applicants in the specified location. About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn Equal Opportunity Employer GFS is proud to provide equal employment opportunities to all applicants . We welcome candidates of all backgrounds and do not discriminate based on race, religion, color, sex, age, national origin, disability, sexual orientation, gender identity, veteran status, or any other status protected by law. Employment offers are subject to successful completion of pre-employment drug screening and physicals, consistent with applicable laws. Note to recruiters: GFS only works with agencies that have signed a contract with our HR team. Resumes sent directly to hiring managers without a prior agreement are considered unsolicited and the property of GFS. Placement fees will not be paid without a formal contract. Compensation details: 6 Yearly Salary PIb2fddd42f5-
Programmer II
Global Finishing Solutions, LLC. Osseo, Wisconsin
Code the Machine. Power the Future. The Programmer II is at the heart of GFS's automation engine. This role doesn't just write code-it brings custom-built machines to life. As a core member of the Electrical Engineering team, the Programmer II designs, builds, and unleashes advanced control programs that power high-impact, customer-driven automation solutions. Working side-by-side with engineers and innovators, this position transforms complex requirements into fast, reliable, and scalable systems. If you thrive on solving tough problems, pushing technology forward, and seeing your work move real equipment in the real world, this role puts you where it all happens. What Success Looks Like Architect and unleash advanced control systems-ladder logic, PLC, and PC-based platforms-that power GFS's most complex automation. Set the standard for power, wiring, and control design, executing fast, clean, and efficient solutions under tight timelines. Monitor, diagnose, and optimize live equipment remotely, keeping systems running and customers moving. Engineer end-to-end automation solutions by tightly integrating hardware and software into cohesive, high-performance systems. Translate raw equipment requests into clear, actionable design specifications that drive flawless execution. Design intuitive, operator-friendly control systems, including HMIs and touchscreen interfaces, that elevate the user experience. Stay on the cutting edge of industrial controls and their application within the finishing industry. Step in when it matters most-supporting commissioning, preventive maintenance, emergency response, warranty, repair, and technical direction for industrial electrical systems. Lead and collaborate across disciplines to solve tough challenges, improve cost and quality, and keep products on track and on time. Qualifications That Shine Education & Experience: We're looking for candidates with an Associate's Degree and 7-12 years of hands-on experience, a Bachelor's Degree with 3-8 years, or a Master's Degree with 0-6 years-your skills and real-world impact matter most. Technical Expertise: Demonstrated mastery of core products, technologies, and industry standards, with the ability to apply knowledge to design, troubleshoot, and optimize advanced control and automation systems. Problem-Solving & Innovation: Strong analytical and critical thinking skills, capable of translating complex requirements into practical, high-performance solutions. Collaboration & Leadership: Comfortable working cross-functionally, leading initiatives, and providing guidance to ensure projects meet quality, cost, and schedule goals. Continuous Learning: Passion for staying ahead of industry trends, embracing new technologies, and applying best practices to keep systems and solutions at the cutting edge. Why You'll Love Working Here Competitive pay + performance incentives Full suite of benefits: medical, dental, vision, life, disability 401(k) with profit sharing-when the company wins, you share the win Career development opportunities in a growing organization A supportive team environment where collaboration and customer success come first Transparent Rewards At GFS, we recognize the dedication behind every role and ensure that our compensation reflects both your impact and our shared success. Pay Range: $71,365 - $89,836 per year based on your experience, skills, and qualifications. Bonus Eligibility: This position is eligible for an annual individual incentive based on company performance. Maximum bonus amounts may vary depending on role. Benefits: Eligible for standard company benefits, including health, dental, and vision insurance, 401(k) retirement plan with company match, paid time off, and other employee programs. More detailed information is available at 2026 GFS Benefits . Actual compensation will be determined by factors including experience, education, certifications, skill level, and market conditions. For remote or hybrid positions, the listed pay range applies to applicants in the specified location. About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn Equal Opportunity Employer GFS is proud to provide equal employment opportunities to all applicants . We welcome candidates of all backgrounds and do not discriminate based on race, religion, color, sex, age, national origin, disability, sexual orientation, gender identity, veteran status, or any other status protected by law. Employment offers are subject to successful completion of pre-employment drug screening and physicals, consistent with applicable laws. Note to recruiters: GFS only works with agencies that have signed a contract with our HR team. Resumes sent directly to hiring managers without a prior agreement are considered unsolicited and the property of GFS. Placement fees will not be paid without a formal contract. Compensation details: 6 Yearly Salary PIe3d3a4ad5-
11/16/2026
Full time
Code the Machine. Power the Future. The Programmer II is at the heart of GFS's automation engine. This role doesn't just write code-it brings custom-built machines to life. As a core member of the Electrical Engineering team, the Programmer II designs, builds, and unleashes advanced control programs that power high-impact, customer-driven automation solutions. Working side-by-side with engineers and innovators, this position transforms complex requirements into fast, reliable, and scalable systems. If you thrive on solving tough problems, pushing technology forward, and seeing your work move real equipment in the real world, this role puts you where it all happens. What Success Looks Like Architect and unleash advanced control systems-ladder logic, PLC, and PC-based platforms-that power GFS's most complex automation. Set the standard for power, wiring, and control design, executing fast, clean, and efficient solutions under tight timelines. Monitor, diagnose, and optimize live equipment remotely, keeping systems running and customers moving. Engineer end-to-end automation solutions by tightly integrating hardware and software into cohesive, high-performance systems. Translate raw equipment requests into clear, actionable design specifications that drive flawless execution. Design intuitive, operator-friendly control systems, including HMIs and touchscreen interfaces, that elevate the user experience. Stay on the cutting edge of industrial controls and their application within the finishing industry. Step in when it matters most-supporting commissioning, preventive maintenance, emergency response, warranty, repair, and technical direction for industrial electrical systems. Lead and collaborate across disciplines to solve tough challenges, improve cost and quality, and keep products on track and on time. Qualifications That Shine Education & Experience: We're looking for candidates with an Associate's Degree and 7-12 years of hands-on experience, a Bachelor's Degree with 3-8 years, or a Master's Degree with 0-6 years-your skills and real-world impact matter most. Technical Expertise: Demonstrated mastery of core products, technologies, and industry standards, with the ability to apply knowledge to design, troubleshoot, and optimize advanced control and automation systems. Problem-Solving & Innovation: Strong analytical and critical thinking skills, capable of translating complex requirements into practical, high-performance solutions. Collaboration & Leadership: Comfortable working cross-functionally, leading initiatives, and providing guidance to ensure projects meet quality, cost, and schedule goals. Continuous Learning: Passion for staying ahead of industry trends, embracing new technologies, and applying best practices to keep systems and solutions at the cutting edge. Why You'll Love Working Here Competitive pay + performance incentives Full suite of benefits: medical, dental, vision, life, disability 401(k) with profit sharing-when the company wins, you share the win Career development opportunities in a growing organization A supportive team environment where collaboration and customer success come first Transparent Rewards At GFS, we recognize the dedication behind every role and ensure that our compensation reflects both your impact and our shared success. Pay Range: $71,365 - $89,836 per year based on your experience, skills, and qualifications. Bonus Eligibility: This position is eligible for an annual individual incentive based on company performance. Maximum bonus amounts may vary depending on role. Benefits: Eligible for standard company benefits, including health, dental, and vision insurance, 401(k) retirement plan with company match, paid time off, and other employee programs. More detailed information is available at 2026 GFS Benefits . Actual compensation will be determined by factors including experience, education, certifications, skill level, and market conditions. For remote or hybrid positions, the listed pay range applies to applicants in the specified location. About GFS Global Finishing Solutions is the leading manufacturer of paint booths and finishing systems serving automotive, aerospace, industrial manufacturing, marine, military, rail, trucking, and wood finishing markets. We specialize in building custom solutions that meet each customer's unique needs-and we do it with a team that thrives on collaboration and innovation because we're different. What makes us different is our unwavering commitment to our core values of family, respect, partnership, improvement, and integrity. We are a family-oriented organization that still values the little things, creating a workplace where you can thrive, fairness guides every decision, and collaboration drives shared success. Small town in spirit but big-hearted in impact, here you're not just joining a company-you're joining a team that grows together, celebrates together, and builds lasting value together. That's the difference. Join us. Apply now at About GFS Watch Us in Action Connect on LinkedIn Equal Opportunity Employer GFS is proud to provide equal employment opportunities to all applicants . We welcome candidates of all backgrounds and do not discriminate based on race, religion, color, sex, age, national origin, disability, sexual orientation, gender identity, veteran status, or any other status protected by law. Employment offers are subject to successful completion of pre-employment drug screening and physicals, consistent with applicable laws. Note to recruiters: GFS only works with agencies that have signed a contract with our HR team. Resumes sent directly to hiring managers without a prior agreement are considered unsolicited and the property of GFS. Placement fees will not be paid without a formal contract. Compensation details: 6 Yearly Salary PIe3d3a4ad5-
R-107233 Automation Engineer II
Resilience Hamilton, Ohio
Job Description Job Description Position Summary The Automation Engineer II is an engineer responsible for enhancing programs across a broad spectrum of functions at the West Chester Site. In this role, you will lead and advise on projects spanning various departments within the site, including Formulation, Aseptic Filling, Automated Inspection, Device Assembly, Packaging, Building Automated System, AMHS, and a site-level Historian system. Collaboration with cross-functional teams, such as MS&T, Engineering, Digital, Quality, Validation, and other key stakeholders, is integral to defining requirements, project execution, and the sustained operation of multiple automated systems on-site. This position is an excellent fit for Automation Engineers who possess problem-solving abilities and a service-oriented mindset. It provides an opportunity for professionals to expand their technical expertise while gaining exposure to a diverse array of systems and actively contributing to their growth and optimization. Responsibilities Participate and support in the design, optimization, commissioning, or validation of newly procured or existing equipment as the automation lead. Interface with several types of equipment and systems, including but not limited to PLCs, SCADAs, HMIs, Servers, Databases, Data Historian, Visualization, and other automation equipment. Consult cross-functionally and assist system owners in process development as the automation subject matter expert. Review and approve requirements, specifications, drawings, coding procedures, and guidelines. Provide technical guidance and train others on systems, software, equipment, machines, procedures, and/or processes. High technical ability with a troubleshooting approach Identify temporary and permanent fixes to address issues. Review and approve documentation needed for the qualification of equipment and processes. Author, review, and revise SOPs and specifications to maintain equipment, systems, and/or facilities. Comply with all SOPs. Ensure proper documentation practices during maintenance processes. Recommend and initiate activities to ensure area and equipment are maintained in a state of compliance. Assess and implement improvements in productivity, waste generation, quality, and cost. Lead and coordinate investigations and studies with little supervision. Interact with regulatory agency personnel during audits and inspections. Perform quality audits to ensure devices used are in proper working condition. Provide 24/7 support to others as part of a rotating on-call support system. All other tasks as needed or assigned by the supervisor. Minimum Qualifications Experience supporting manufacturing operations in a regulated or cGMP environment Experience with some of the following Automation systems (PLC, HMI, SCADA): Rockwell, Inductive (Ignition), Aveva (Wonderware), Siemens, Emerson (GE), or B&R Ability to work independently with excellent attention to detail and a desire to learn about manufacturing technologies Preferred Qualifications Bachelor's degree in Engineering, Computer Science, or a related discipline Experience with FactoryTalk Batch Experience with Data Historian and Visualization systems such as Aveva PI (OSI PI) Experience with Microsoft SQL database design Knowledge of GAMP 5 and ISA standards Knowledge of change control, deviation, CAPA, validation, and qualification principles Company Description RESILIENCE is a first-of-its-kind manufacturing and technology company dedicated to broadening access to complex medicines and protecting biopharmaceutical supply chains against disruption. Founded in 2020, the company is building a sustainable network of high-tech, end-to-end manufacturing solutions to ensure the medicines of today and tomorrow can be made quickly, safely, and at scale. RESILIENCE will offer the highest quality and regulatory capabilities, and flexible and adaptive facilities to serve partners of all sizes. By continuously advancing the science of biopharmaceutical manufacturing and development, RESILIENCE frees partners to focus on the discoveries that improve patients' lives. Company Description RESILIENCE is a first-of-its-kind manufacturing and technology company dedicated to broadening access to complex medicines and protecting biopharmaceutical supply chains against disruption. Founded in 2020, the company is building a sustainable network of high-tech, end-to-end manufacturing solutions to ensure the medicines of today and tomorrow can be made quickly, safely, and at scale. RESILIENCE will offer the highest quality and regulatory capabilities, and flexible and adaptive facilities to serve partners of all sizes. By continuously advancing the science of biopharmaceutical manufacturing and development, RESILIENCE frees partners to focus on the discoveries that improve patients' lives.
11/16/2026
Full time
Job Description Job Description Position Summary The Automation Engineer II is an engineer responsible for enhancing programs across a broad spectrum of functions at the West Chester Site. In this role, you will lead and advise on projects spanning various departments within the site, including Formulation, Aseptic Filling, Automated Inspection, Device Assembly, Packaging, Building Automated System, AMHS, and a site-level Historian system. Collaboration with cross-functional teams, such as MS&T, Engineering, Digital, Quality, Validation, and other key stakeholders, is integral to defining requirements, project execution, and the sustained operation of multiple automated systems on-site. This position is an excellent fit for Automation Engineers who possess problem-solving abilities and a service-oriented mindset. It provides an opportunity for professionals to expand their technical expertise while gaining exposure to a diverse array of systems and actively contributing to their growth and optimization. Responsibilities Participate and support in the design, optimization, commissioning, or validation of newly procured or existing equipment as the automation lead. Interface with several types of equipment and systems, including but not limited to PLCs, SCADAs, HMIs, Servers, Databases, Data Historian, Visualization, and other automation equipment. Consult cross-functionally and assist system owners in process development as the automation subject matter expert. Review and approve requirements, specifications, drawings, coding procedures, and guidelines. Provide technical guidance and train others on systems, software, equipment, machines, procedures, and/or processes. High technical ability with a troubleshooting approach Identify temporary and permanent fixes to address issues. Review and approve documentation needed for the qualification of equipment and processes. Author, review, and revise SOPs and specifications to maintain equipment, systems, and/or facilities. Comply with all SOPs. Ensure proper documentation practices during maintenance processes. Recommend and initiate activities to ensure area and equipment are maintained in a state of compliance. Assess and implement improvements in productivity, waste generation, quality, and cost. Lead and coordinate investigations and studies with little supervision. Interact with regulatory agency personnel during audits and inspections. Perform quality audits to ensure devices used are in proper working condition. Provide 24/7 support to others as part of a rotating on-call support system. All other tasks as needed or assigned by the supervisor. Minimum Qualifications Experience supporting manufacturing operations in a regulated or cGMP environment Experience with some of the following Automation systems (PLC, HMI, SCADA): Rockwell, Inductive (Ignition), Aveva (Wonderware), Siemens, Emerson (GE), or B&R Ability to work independently with excellent attention to detail and a desire to learn about manufacturing technologies Preferred Qualifications Bachelor's degree in Engineering, Computer Science, or a related discipline Experience with FactoryTalk Batch Experience with Data Historian and Visualization systems such as Aveva PI (OSI PI) Experience with Microsoft SQL database design Knowledge of GAMP 5 and ISA standards Knowledge of change control, deviation, CAPA, validation, and qualification principles Company Description RESILIENCE is a first-of-its-kind manufacturing and technology company dedicated to broadening access to complex medicines and protecting biopharmaceutical supply chains against disruption. Founded in 2020, the company is building a sustainable network of high-tech, end-to-end manufacturing solutions to ensure the medicines of today and tomorrow can be made quickly, safely, and at scale. RESILIENCE will offer the highest quality and regulatory capabilities, and flexible and adaptive facilities to serve partners of all sizes. By continuously advancing the science of biopharmaceutical manufacturing and development, RESILIENCE frees partners to focus on the discoveries that improve patients' lives. Company Description RESILIENCE is a first-of-its-kind manufacturing and technology company dedicated to broadening access to complex medicines and protecting biopharmaceutical supply chains against disruption. Founded in 2020, the company is building a sustainable network of high-tech, end-to-end manufacturing solutions to ensure the medicines of today and tomorrow can be made quickly, safely, and at scale. RESILIENCE will offer the highest quality and regulatory capabilities, and flexible and adaptive facilities to serve partners of all sizes. By continuously advancing the science of biopharmaceutical manufacturing and development, RESILIENCE frees partners to focus on the discoveries that improve patients' lives.
Advanced Engineer, Additive Process
Hyliion Bellville, Texas
Job Description Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. This is an onsite role only. Job Purpose and Overview Step into the world of metal additive manufacturing for the KARNO generator , where advanced laser powder-bed fusion meets real engineering challenge. Engineers in this group work across machine behavior, process optimization, material performance, data analytics, and hardware development to ensure high-quality, repeatable production using metal laser powder-bed fusion systems. If you're the kind of engineer who enjoys digging into machine behavior, fine-tuning laser strategies, studying how materials evolve layer by layer, and pushing metal AM systems to run cleaner, faster, and more consistently, this team is built for you. The work is hands-on, data-driven, and central to scaling a first-of-its-kind distributed power technology. In this role, you'll move across the entire additive manufacturing ecosystem. You'll investigate how machine settings influence melt pools, porosity, and microstructure, and you'll design controlled experiments to refine parameters and boost repeatability. A big part of the job involves troubleshooting machine quirks, interpreting sensor data, and making sense of real-time process feedback. You'll also be working closely with design, materials, and hardware teams to bring complex AM components from early prototypes into reliable production. Along the way, you'll help build the systems, standards, and workflows that turn metal AM into a high-trust, high-reliability manufacturing process for power-generation hardware. Duties and Responsibilities: Parameter Development Focus Identify and optimize critical-to-function (CTF) parameters that drive mechanical performance, density, porosity, microstructure, and repeatability. Design and execute experiments (DOE) to map the process window, understand sensitivities, and reduce variation. Build and maintain parameter sets for new alloys, new hardware, and new machine configurations. Work with sensor data, log files, and monitoring systems to correlate in-process signatures with part quality. Develop statistical models, SPC controls, and trend analysis tools to ensure stable production behavior. Machine Development Focus Improve AM machine capability through hardware tuning, sensor integration, calibration routines, and control-system optimization. Lead machine troubleshooting, repair activities, and upgrades to improve uptime, repeatability, and print speeds. Conduct machine characterization using advanced tools and metrology equipment to map laser optics, powder behavior, thermal gradients, and recoater performance. Support machine-level IQ/OQ/MQ qualification and ongoing PM/maintenance strategies. Collaborate with equipment vendors and internal engineering teams on new machine features, experimental setups, and pilot systems. Drive automation, digital manufacturing, and data-acquisition improvements for machine performance monitoring. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education, Experience and Certifications Required Bachelor's degree in mechanical, materials science, aerospace, or related engineering discipline. Requires a minimum of 5 years of engineering experience after earning a bachelor's degree; relevant graduate project work can be applied toward requirements. Direct, hands-on experience with laser powder bed fusion (LPBF) additive manufacturing REQUIRED . Background in fabrication, prototyping, testing, or process development within an engineering environment. Ability to interpret engineering drawings, apply GD&T, and understand material properties data. Strong analytical and root-cause problem-solving skills. Comfortable working hands-on with machines, tools, test equipment, and mechanical assemblies. Skills and Abilities Preferred Build prep/simulation software like ANSYS Additive Suite, 3DXpert, or Dyndrite. Experience developing AM parameters, designing DOEs, or using statistical analysis tools (SPC, JMP, Minitab, Python, MATLAB). Experience troubleshooting AM machines, calibrating optics, repairing systems, or working with machine sensors and controls. Knowledge of DFAM principles, heat-treat processes, and additive-appropriate material behaviors (e.g., nickel alloys, titanium). Familiarity with CAD tools (NX, SolidWorks, or similar) and simulation/analysis workflows. Experience with IQ/OQ/MQ qualification approaches. Strong communication skills and ability to present findings to cross-functional teams. Experience in a fast-paced R&D or startup hardware environment. Why This Role Matters These engineers sit at the core of enabling scalable, high-performance additive manufacturing for the KARNO generator platform. Your work directly influences machine capability, part quality, manufacturability, and the timeline for scaling production of a first-of-its-kind power-generation technology. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements Ability to lift and/or move up to 50 pounds. Ability to travel domestically, as needed, by plane, automobile, etc. approximately 30% of the time, Benefits: Medical Plans, with PPO or HDHP options Dental Plans, with buy-up option Vision Plan Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options Short Term Disability, paid for by the company Long Term Disability, paid for by the company Flexible Spending Accounts (FSA) Health Savings Account (HSA) 401k/Roth 401k Voluntary Accident Plans Voluntary Critical Illness Plans Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at .
09/26/2026
Full time
Job Description Job Description Hyliion is committed to creating innovative solutions that enable clean, flexible and affordable electricity production. The Company's primary focus is to develop distributed power generators that can operate on various fuel sources to future-proof against an ever-changing energy economy. This is an onsite role only. Job Purpose and Overview Step into the world of metal additive manufacturing for the KARNO generator , where advanced laser powder-bed fusion meets real engineering challenge. Engineers in this group work across machine behavior, process optimization, material performance, data analytics, and hardware development to ensure high-quality, repeatable production using metal laser powder-bed fusion systems. If you're the kind of engineer who enjoys digging into machine behavior, fine-tuning laser strategies, studying how materials evolve layer by layer, and pushing metal AM systems to run cleaner, faster, and more consistently, this team is built for you. The work is hands-on, data-driven, and central to scaling a first-of-its-kind distributed power technology. In this role, you'll move across the entire additive manufacturing ecosystem. You'll investigate how machine settings influence melt pools, porosity, and microstructure, and you'll design controlled experiments to refine parameters and boost repeatability. A big part of the job involves troubleshooting machine quirks, interpreting sensor data, and making sense of real-time process feedback. You'll also be working closely with design, materials, and hardware teams to bring complex AM components from early prototypes into reliable production. Along the way, you'll help build the systems, standards, and workflows that turn metal AM into a high-trust, high-reliability manufacturing process for power-generation hardware. Duties and Responsibilities: Parameter Development Focus Identify and optimize critical-to-function (CTF) parameters that drive mechanical performance, density, porosity, microstructure, and repeatability. Design and execute experiments (DOE) to map the process window, understand sensitivities, and reduce variation. Build and maintain parameter sets for new alloys, new hardware, and new machine configurations. Work with sensor data, log files, and monitoring systems to correlate in-process signatures with part quality. Develop statistical models, SPC controls, and trend analysis tools to ensure stable production behavior. Machine Development Focus Improve AM machine capability through hardware tuning, sensor integration, calibration routines, and control-system optimization. Lead machine troubleshooting, repair activities, and upgrades to improve uptime, repeatability, and print speeds. Conduct machine characterization using advanced tools and metrology equipment to map laser optics, powder behavior, thermal gradients, and recoater performance. Support machine-level IQ/OQ/MQ qualification and ongoing PM/maintenance strategies. Collaborate with equipment vendors and internal engineering teams on new machine features, experimental setups, and pilot systems. Drive automation, digital manufacturing, and data-acquisition improvements for machine performance monitoring. Qualifications Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education, Experience and Certifications Required Bachelor's degree in mechanical, materials science, aerospace, or related engineering discipline. Requires a minimum of 5 years of engineering experience after earning a bachelor's degree; relevant graduate project work can be applied toward requirements. Direct, hands-on experience with laser powder bed fusion (LPBF) additive manufacturing REQUIRED . Background in fabrication, prototyping, testing, or process development within an engineering environment. Ability to interpret engineering drawings, apply GD&T, and understand material properties data. Strong analytical and root-cause problem-solving skills. Comfortable working hands-on with machines, tools, test equipment, and mechanical assemblies. Skills and Abilities Preferred Build prep/simulation software like ANSYS Additive Suite, 3DXpert, or Dyndrite. Experience developing AM parameters, designing DOEs, or using statistical analysis tools (SPC, JMP, Minitab, Python, MATLAB). Experience troubleshooting AM machines, calibrating optics, repairing systems, or working with machine sensors and controls. Knowledge of DFAM principles, heat-treat processes, and additive-appropriate material behaviors (e.g., nickel alloys, titanium). Familiarity with CAD tools (NX, SolidWorks, or similar) and simulation/analysis workflows. Experience with IQ/OQ/MQ qualification approaches. Strong communication skills and ability to present findings to cross-functional teams. Experience in a fast-paced R&D or startup hardware environment. Why This Role Matters These engineers sit at the core of enabling scalable, high-performance additive manufacturing for the KARNO generator platform. Your work directly influences machine capability, part quality, manufacturability, and the timeline for scaling production of a first-of-its-kind power-generation technology. Role Classification and Working Conditions This is a salaried, exempt-level position. This position typically works in an office environment; and given the nature of our business is also exposed to operations/warehouses/production environments. Physical/Other Requirements Ability to lift and/or move up to 50 pounds. Ability to travel domestically, as needed, by plane, automobile, etc. approximately 30% of the time, Benefits: Medical Plans, with PPO or HDHP options Dental Plans, with buy-up option Vision Plan Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options Short Term Disability, paid for by the company Long Term Disability, paid for by the company Flexible Spending Accounts (FSA) Health Savings Account (HSA) 401k/Roth 401k Voluntary Accident Plans Voluntary Critical Illness Plans Hospital Indemnity Plan Hyliion is proud to be an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, age, disability, veteran status. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to otherwise participate in the employment selection process, please direct your inquires to Hyliion's human resources department at .

Modal Window

  • Home
  • Contact
  • About Us
  • FAQs
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • IT blog
  • Facebook
  • Twitter
  • LinkedIn
  • Youtube
© 2008-2026 IT Job Board