Pay Range: $20.00hr - $25.00hr Job Overview: Four or more years of experience supporting and managing network infrastructure and network-related devices. Experienced in racking, stacking, cabling, and decommissioning network hardware devices. Experienced in Site Services support for console and remote network device maintenance. IT and telecoms experience with routing, switching, firewalls, WiFi, IP Telephony (IPT), and Radio Frequency (RF) equipment such as microwave radios, cellular nodes, and very-small-aperture terminals (VSATs). Responsibilities: Respond to ServiceNow incident tickets. Perform patching cable installation and recovery. Install power leads. Install, remove, or swap equipment. Locate and identify network circuits and tag the demarcation location. Provide escort services for third-party vendors or subcontractors wherever support is being provided. Adhere to risk management processes, including conducting walkthroughs, managing work permits, handling change management, attending safety training, and reporting incidents. Comply with audit requirements, information protection requirements, security requirements, and standards detailing physical access management and operational excellence. Troubleshoot and patch power cables. Identify switch port locations. Ping key devices and perform DNS lookups. Troubleshoot, install, and remove equipment or components while performing visual checks for hardware failure lights, console error messages, power status, and hardware labels. Assist with the identification and reporting of communications room environmental issues, such as lack of cooling or water leaks. Perform IMAC activities for end-user business LAN and voice devices. Adhere to established change management procedures and practices. Monitor and respond to emergency conditions affecting operations to the extent that services can be safely provided. Adhere to Business Continuity Plans and Disaster Recovery Plans. Provide smart-hands support for telecommunications infrastructure, including fiber optic and copper cable installation, maintenance, troubleshooting, and repair. Support WiFi and BLE systems. Install, maintain, troubleshoot, and repair microwave systems. Install, maintain, troubleshoot, and repair radio systems including HF, VHF, UHF, 2-way, and radar. Install, maintain, troubleshoot, and repair VSAT systems. Support cellular-based systems such as public and private 4G LTE, 5G, NB-IIoT, and LTE-M. Support low-power WAN (lpWAN) systems such as LoRaWAN. Support other IIoT and OT systems. Deploy prewired solar panel and battery power systems at ground level, performing visual low-maintenance checks, troubleshooting, and repairs. Perform IP Telephony (IPT) installations at end-user locations. Install, maintain, troubleshoot, and repair specialty telecoms systems such as CCTV, PAGA, Intercom, and Fire/Intruder Alarm systems, specifically for remote sites and offshore. Work cooperatively and collaboratively across organizations, including Design and Engineering Teams, Global IT Service Desk, IT Operations Center (ITOC), telecommunication vendors, and managed service providers to restore services. Support IT and telecoms requirements for Business Units, Major Capital Projects, and Merger, Acquisition, and Divestiture projects as guided by the network team. Participate in Root Cause Analysis post-incidents as requested. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $20.00hr - $25.00hr Job Overview: Four or more years of experience supporting and managing network infrastructure and network-related devices. Experienced in racking, stacking, cabling, and decommissioning network hardware devices. Experienced in Site Services support for console and remote network device maintenance. IT and telecoms experience with routing, switching, firewalls, WiFi, IP Telephony (IPT), and Radio Frequency (RF) equipment such as microwave radios, cellular nodes, and very-small-aperture terminals (VSATs). Responsibilities: Respond to ServiceNow incident tickets. Perform patching cable installation and recovery. Install power leads. Install, remove, or swap equipment. Locate and identify network circuits and tag the demarcation location. Provide escort services for third-party vendors or subcontractors wherever support is being provided. Adhere to risk management processes, including conducting walkthroughs, managing work permits, handling change management, attending safety training, and reporting incidents. Comply with audit requirements, information protection requirements, security requirements, and standards detailing physical access management and operational excellence. Troubleshoot and patch power cables. Identify switch port locations. Ping key devices and perform DNS lookups. Troubleshoot, install, and remove equipment or components while performing visual checks for hardware failure lights, console error messages, power status, and hardware labels. Assist with the identification and reporting of communications room environmental issues, such as lack of cooling or water leaks. Perform IMAC activities for end-user business LAN and voice devices. Adhere to established change management procedures and practices. Monitor and respond to emergency conditions affecting operations to the extent that services can be safely provided. Adhere to Business Continuity Plans and Disaster Recovery Plans. Provide smart-hands support for telecommunications infrastructure, including fiber optic and copper cable installation, maintenance, troubleshooting, and repair. Support WiFi and BLE systems. Install, maintain, troubleshoot, and repair microwave systems. Install, maintain, troubleshoot, and repair radio systems including HF, VHF, UHF, 2-way, and radar. Install, maintain, troubleshoot, and repair VSAT systems. Support cellular-based systems such as public and private 4G LTE, 5G, NB-IIoT, and LTE-M. Support low-power WAN (lpWAN) systems such as LoRaWAN. Support other IIoT and OT systems. Deploy prewired solar panel and battery power systems at ground level, performing visual low-maintenance checks, troubleshooting, and repairs. Perform IP Telephony (IPT) installations at end-user locations. Install, maintain, troubleshoot, and repair specialty telecoms systems such as CCTV, PAGA, Intercom, and Fire/Intruder Alarm systems, specifically for remote sites and offshore. Work cooperatively and collaboratively across organizations, including Design and Engineering Teams, Global IT Service Desk, IT Operations Center (ITOC), telecommunication vendors, and managed service providers to restore services. Support IT and telecoms requirements for Business Units, Major Capital Projects, and Merger, Acquisition, and Divestiture projects as guided by the network team. Participate in Root Cause Analysis post-incidents as requested. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Pay Range: $19.00hr - $24.00hr Job Overview: Four plus years of experience supporting and managing network infrastructure and network-related devices. Experienced in racking, stacking, cabling, and decommissioning network hardware devices. Experienced in Site Services support for network device console and remote maintenance. Background in IT and Telecoms, including routing, switching, firewalls, WiFi, IP Telephony, and Radio Frequency equipment such as microwave radios, cellular nodes, and VSATs. Responsibilities: Respond to ServiceNow incident tickets. Handle patching cable installation and recovery. Install power leads. Install, remove, or swap equipment. Locate and identify network circuits and tag the demarcation location. Provide escort services for third-party vendors or subcontractors. Adhere to risk management processes, including conducting walkthroughs, managing work permits, handling change management, attending safety training, and reporting incidents. Comply with audit, information protection, physical access management security, and operational excellence standards. Troubleshoot and patch power cables. Identify switch port locations. Ping key devices and perform DNS lookups. Troubleshoot, install, and remove equipment or components while performing visual checks for hardware failure lights, console error messages, power status, and hardware labels. Assist with identifying and reporting communications room environmental issues such as cooling failures or water leaks. Perform IMAC activities for end-user business LAN and voice devices. Adhere to change management procedures and practices. Monitor and respond to emergency conditions affecting operations to the extent that services can be safely provided. Adhere to Business Continuity Plans and Disaster Recovery Plans. Provide smart-hands support for telecommunications infrastructure including fiber optic and copper cabling installation, maintenance, troubleshooting, and repair. Support WiFi, BLE systems, microwave systems, radio systems (HF, VHF, UHF, 2-way, radar), VSAT, and cellular-based systems (public/private 4G LTE, 5G, NB-IIoT, LTE-M). Support low-power WAN systems such as LoRaWAN and other IIoT/OT systems. Deploy prewired solar panel and battery power systems at ground level, performing visual maintenance, troubleshooting, and repair. Execute IP Telephony (IPT) installations at end-user locations and support specialty telecom systems including CCTV, PAGA, Intercom, and Fire/Intruder Alarms. Work cooperatively across internal teams, IT operations, telecommunications vendors, and managed service providers to restore services. Support IT and telecoms requirements for Business Units, Major Capital Projects, and Merger, Acquisition, and Divestiture projects. Participate in Root Cause Analysis following post-incident reviews. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
11/14/2026
Full time
Pay Range: $19.00hr - $24.00hr Job Overview: Four plus years of experience supporting and managing network infrastructure and network-related devices. Experienced in racking, stacking, cabling, and decommissioning network hardware devices. Experienced in Site Services support for network device console and remote maintenance. Background in IT and Telecoms, including routing, switching, firewalls, WiFi, IP Telephony, and Radio Frequency equipment such as microwave radios, cellular nodes, and VSATs. Responsibilities: Respond to ServiceNow incident tickets. Handle patching cable installation and recovery. Install power leads. Install, remove, or swap equipment. Locate and identify network circuits and tag the demarcation location. Provide escort services for third-party vendors or subcontractors. Adhere to risk management processes, including conducting walkthroughs, managing work permits, handling change management, attending safety training, and reporting incidents. Comply with audit, information protection, physical access management security, and operational excellence standards. Troubleshoot and patch power cables. Identify switch port locations. Ping key devices and perform DNS lookups. Troubleshoot, install, and remove equipment or components while performing visual checks for hardware failure lights, console error messages, power status, and hardware labels. Assist with identifying and reporting communications room environmental issues such as cooling failures or water leaks. Perform IMAC activities for end-user business LAN and voice devices. Adhere to change management procedures and practices. Monitor and respond to emergency conditions affecting operations to the extent that services can be safely provided. Adhere to Business Continuity Plans and Disaster Recovery Plans. Provide smart-hands support for telecommunications infrastructure including fiber optic and copper cabling installation, maintenance, troubleshooting, and repair. Support WiFi, BLE systems, microwave systems, radio systems (HF, VHF, UHF, 2-way, radar), VSAT, and cellular-based systems (public/private 4G LTE, 5G, NB-IIoT, LTE-M). Support low-power WAN systems such as LoRaWAN and other IIoT/OT systems. Deploy prewired solar panel and battery power systems at ground level, performing visual maintenance, troubleshooting, and repair. Execute IP Telephony (IPT) installations at end-user locations and support specialty telecom systems including CCTV, PAGA, Intercom, and Fire/Intruder Alarms. Work cooperatively across internal teams, IT operations, telecommunications vendors, and managed service providers to restore services. Support IT and telecoms requirements for Business Units, Major Capital Projects, and Merger, Acquisition, and Divestiture projects. Participate in Root Cause Analysis following post-incident reviews. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Job Description Job Description RF Design Technician Trans-Tech is the leading design and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, circulators and isolators, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors. Position Overview: The RF Design Technician is responsible for the development, design, and manufacturing support of microwave passive devices, with a focus on ceramic resonator-based filters. This role involves concept development, design documentation, prototype testing, and successful manufacturing introduction. The technician will provide technical leadership and support across various stages of product development and lifecycle management. Essential Job Functions: Technical Support: Provide training and technical support from concept through prototype to ensure smooth transition into volume manufacturing. Interface with manufacturing to resolve production and technical problems. Assist with Design and Development: Conceptualize, plan, design, develop, and analyze microwave filters for frequencies between Component Selection: Select electronic parts, components, or integrated circuitry based on specifications and reliability. Review vendor capabilities to support product development. Bench Design and Tuning: To build prototype filters on the bench tuned to meet design performance specifications. Precision Solder Techniques: Apply skills for solder/solder reflow of surface-mount devices (SMD) and apply visual acceptance criteria for inspection of finished products as defined in IPC-A-610 Competencies: Good soldering techniques and able to do solder rework using a microscope. Familiarity with ESD safety and prevention. Experience with RF Test and Measurement equipment, Network Analyzer, Spectrum Analyzer, Frequency Generators, Power Amplifiers, Oscilloscopes, DVM's, etc. Experience with multi-layer printed wiring boards (PWB) design and layout up to 40 GHz. Knowledge of metallization processes, including thick film processes. Ability to use diagnostic and microwave evaluation and test equipment. Strong analytical and design methodology skills. Proficiency with AutoCAD or SolidWorks and standard computer software packages (Microsoft Word and Excel). Qualifications: Education: High school diploma or equivalent plus formal military or commercial electronics training, or an associate degree in electronics technology with knowledge in radio frequency/microwave theory and technology. Experience: Experience in RF/microwave hardware development, with progressively increasing responsibility is a plus. Skills: Competent in RF measurements and design validation procedures with the ability to apply microwave theory in the design, testing, and troubleshooting of passive microwave devices is a plus. Ability to read/follow wiring schematics. Knowledge of the ANSYS simulation software a plus. Security: Must be a US Person. Benefits include: Medical, Dental, and Vision insurance Option to participate in 401(k) plan with safe harbor match Company-paid Life Insurance Paid time off Paid holidays Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.
11/12/2026
Full time
Job Description Job Description RF Design Technician Trans-Tech is the leading design and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, circulators and isolators, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors. Position Overview: The RF Design Technician is responsible for the development, design, and manufacturing support of microwave passive devices, with a focus on ceramic resonator-based filters. This role involves concept development, design documentation, prototype testing, and successful manufacturing introduction. The technician will provide technical leadership and support across various stages of product development and lifecycle management. Essential Job Functions: Technical Support: Provide training and technical support from concept through prototype to ensure smooth transition into volume manufacturing. Interface with manufacturing to resolve production and technical problems. Assist with Design and Development: Conceptualize, plan, design, develop, and analyze microwave filters for frequencies between Component Selection: Select electronic parts, components, or integrated circuitry based on specifications and reliability. Review vendor capabilities to support product development. Bench Design and Tuning: To build prototype filters on the bench tuned to meet design performance specifications. Precision Solder Techniques: Apply skills for solder/solder reflow of surface-mount devices (SMD) and apply visual acceptance criteria for inspection of finished products as defined in IPC-A-610 Competencies: Good soldering techniques and able to do solder rework using a microscope. Familiarity with ESD safety and prevention. Experience with RF Test and Measurement equipment, Network Analyzer, Spectrum Analyzer, Frequency Generators, Power Amplifiers, Oscilloscopes, DVM's, etc. Experience with multi-layer printed wiring boards (PWB) design and layout up to 40 GHz. Knowledge of metallization processes, including thick film processes. Ability to use diagnostic and microwave evaluation and test equipment. Strong analytical and design methodology skills. Proficiency with AutoCAD or SolidWorks and standard computer software packages (Microsoft Word and Excel). Qualifications: Education: High school diploma or equivalent plus formal military or commercial electronics training, or an associate degree in electronics technology with knowledge in radio frequency/microwave theory and technology. Experience: Experience in RF/microwave hardware development, with progressively increasing responsibility is a plus. Skills: Competent in RF measurements and design validation procedures with the ability to apply microwave theory in the design, testing, and troubleshooting of passive microwave devices is a plus. Ability to read/follow wiring schematics. Knowledge of the ANSYS simulation software a plus. Security: Must be a US Person. Benefits include: Medical, Dental, and Vision insurance Option to participate in 401(k) plan with safe harbor match Company-paid Life Insurance Paid time off Paid holidays Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair
10/07/2026
Full time
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair
10/02/2026
Full time
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair
10/02/2026
Full time
Job Description Job Description The essential duties and responsibilities of the Experienced Two-Way Radio Technician, BDA Installer are as follows: Install Bi Directional Amplifiers (BDA), equipment and associated components Install 2-way radios in commercial and public safety vehicles Troubleshoot, diagnose and provide solutions to customer problems/needs Complete service visit paperwork Experience will be gained in the following areas: Installations of mobile and base station radios Radio Frequency (RF) theory and design NFPA Codes IP Networking Construction of system infrastructure Radio programming and repair System troubleshooting and repair