9 jobs found

Job Description Job Description Description: The Maintenance, Repair and Overhaul (MRO)/ Maintenance Repair and Overhaul - Supply (MRO-S) Functional Management Office (FMO) requires the support of a Test Analyst. This person will represent the Functional Management Office (FMO) as part of the Delta Point Testing team and support MRO/MRO-S FMO testing activities as directed. The Test Analyst supports the Maintenance, Repair and Overhaul (MRO) / MRO-S program by planning, executing, documenting, and supporting testing activities for software and IT solutions. The position works with functional, technical, and customer stakeholders to validate system functionality and support delivery of reliable production solutions Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Develop and execute test procedures, test cases, test scenarios, and supporting documentation. Perform functional, integration, regression, system, and user-focused testing as applicable. Document test results, defects, discrepancies, and system performance. Perform diagnostic testing and troubleshooting to verify system functionality. Support Agile testing activities throughout the software development lifecycle. Work with developers, functional analysts, and stakeholders to investigate and resolve identified defects. Support compliance with applicable DoD and Air Force testing policies, processes, standards, and documentation requirements. Assist with testing associated with deployment and implementation of MRO/MRO-S production solutions. Maintain accurate test records and communicate testing status, risks, issues, and results to program stakeholders. Collaborate with internal and external organizations supporting program testing activities. Support development and continuous improvement of standardized testing processes, tools, and practices. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Moderate noise is typical for this work environment Must be able to remain in a sitting / stationary position for more than 50% off the time Constantly operate a computer. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to touch, handle, or feel; to talk and hear. The employee is occasionally required to stand, walk, and reach with hands and arms. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Requirements: The selected candidate will have the following qualifications: Experience performing software or IT system testing. Knowledge of testing methodologies, procedures, standards, and tools. Experience developing test procedures and documenting test results. Familiarity with Agile software development and testing practices. Strong analytical, troubleshooting, documentation, and communication skills. Ability to collaborate effectively with technical and functional teams. Air Force or DoD IT system test and evaluation experience preferred. Education/Experience: 3+ years Air Force and Department of Defense Information Technology (IT) systems testing experience. Experience in Air Force Test and Evaluation of IT Systems to include Agile testing, development of required documentation; test design; testing methods, standards, and tools; DoD and Air Force policies and processes required to ensure accreditation of deployed software. Competencies: To perform the job successfully, an individual should demonstrate the following. Achievement Focus - Sets and achieves challenging goals; demonstrates persistence and overcomes obstacles; measures self against standard of excellence; recognizes and acts on opportunities; takes calculated risks to accomplish goals. Communications - Expresses ideas and thoughts verbally; expresses ideas and thoughts in written form; exhibits good listening and comprehension; keeps others adequately informed; selects and uses appropriate communication methods. Solid presentation skills and ability to respond and think on your feet. Planning/Organizing - Prioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; organizes or schedules other people and their tasks; develops realistic action plans. Strong project management skills, including project planning, scheduling, and risk management. Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics.

Job Description Job Description The Lead Relay Technician (Protection and Control) leads the testing and commissioning of protection, control, and SCADA systems for new substations, from 34.5 kV collector substations through 345 kV transmission interconnections. This role serves as the on-site technical lead, directing contract test crews and junior technicians, coordinating with SCADA vendors and utility personnel, and ensuring systems are tested, documented, and ready for safe energization. This is a field-based position requiring travel of more than 75% to project sites, often for extended periods. Summary: We're leading the industry in sustainable energy careers. We understand that our employees are the lifeblood of the company. We strive to align company goals with those of our employees. We're constantly innovating to make a difference for our customers, our employees, and our planet. Our mission is to make a difference by developing cost-efficient alternatives to traditional energy sources, without long-term dependence on government subsidies. We're leading the industry in sustainable energy careers. We hope you'll join us. Essential Duties and Responsibilities: Lead protection and control testing and commissioning for 34.5 kV collector substations through 345 kV transmission interconnections Perform and direct testing of microprocessor-based relays from SEL, Siemens, and other manufacturers using Doble and/or Omicron test equipment Review relay settings, schematics, AC/DC elementaries, and wiring diagrams; identify discrepancies and maintain redlines Perform and oversee CT and PT testing, wiring verification, trip checks, and functional testing of protection schemes, including differential, distance, and breaker failure Perform point-to-point checkout of SCADA and communications systems and coordinate with SCADA vendors during device commissioning Coordinate with utility relay engineers and personnel for end-to-end testing, interconnection requirements, and energization Direct the daily work of contract test crews and junior technicians, and review their test results for accuracy and completeness Prepare and review test reports, commissioning documentation, and as-built markups for project turnover Support energization activities and troubleshoot protection, control, and communications issues Follow and enforce safe work practices, including NFPA 70E, lockout/tagout, and site safety requirements Maintain assigned tools, test equipment, PPE, and company-issued materials in good working condition Perform other duties as assigned by supervisor Education and/or Work Experience Requirements: High school diploma or GED Minimum of 5 years of experience in protective relay testing and substation commissioning Experience with protection schemes for 34.5 kV collector substations through 345 kV transmission interconnections, including feeder, transformer, and bus differential, line differential, distance, and breaker failure schemes Hands-on experience testing and commissioning microprocessor-based relays from SEL, Siemens, and other manufacturers, using test equipment such as Doble and/or Omicron Working knowledge of substation SCADA and communications systems, including RTUs, DNP3, and fiber networks, with the ability to perform point-to-point checkout and verify integration with protection systems NFPA 70E qualified electrical worker training and OSHA 10 certification PGS provides additional safety and technical training on an as-needed basis Valid driver's license and an acceptable driving record Associate's degree in electrical or electronics technology, or equivalent military training NETA Level III or IV certification Experience with IEC 61850 and coordinating with SCADA vendors during commissioning OSHA 30 certification Physical Requirements/Work Environment: This role requires the following, with or without reasonable accommodation: Field Works outdoors at project sites, with exposure to weather elements, including heat, cold, rain, and wind Walks and stands for extended periods on uneven terrain Climbs, kneels, crouches, stoops, and reaches Lifts and carries up to 60 pounds Works around noise, dust, moving equipment, and energized electrical equipment Wears required personal protective equipment (PPE), such as a hard hat, safety glasses, gloves, and safety-toe boots Travels between project sites, which may include operating a vehicle Works extended hours, nights, and weekends as needed to support testing and energization schedules Works in substation control enclosures and around high-voltage switchyard equipment Perks and Benefits : we offer medical/dental/vision insurance plans, PTO, and 401K with a company matching portion. About Us Strata Clean Energy is a leading developer, EPC, and service provider for utility-scale solar and storage systems in the United States. We control and self-perform all processes from our nationwide solar and storage developments, to construction, O&M, and Asset Management. Our employees are empowered to drive our business in a collaborative, creative, and passion-driven environment that fosters long-term professional growth. There is a lot to learn at Strata, but we're here to help you give your best and have a good time doing it. At Strata, you're part of something big. We're leading the industry in sustainable energy careers. We are driving innovation to make a difference for our customers, our employees, and our planet. Join us in powering the future. Strata Solar is an equal opportunity and affirmative action employer. Strata Solar is an equal employment and affirmative action employer whereby we do not engage in practices that discriminate against any person employed or seeking employment based on race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, marital status, disability, veteran status, genetic information or any other status or characteristic protected under applicable law.

Job Title: Work Leader Location: Polkton, NC Department: Manufacturing / Operations Reports To: Foreman / Production Supervisor Employment Type: Full-Time Position Overview The Work Leader is responsible for supporting daily departmental operations, coordinating production activities, and providing hands-on leadership to ensure work is completed safely, efficiently, and according to company quality standards. This position requires strong technical knowledge, leadership abilities, and the capability to maintain productivity, workflow, and departmental performance, particularly in the absence of a Foreman or Supervisor. The Work Leader serves as a resource for department employees by providing guidance, assisting with training, resolving operational challenges, and ensuring workstations have the necessary materials and assignments. This role also involves using company computer systems to monitor work orders, review production schedules, and support communication between departments. By promoting teamwork, accountability, safety, and continuous improvement, the Work Leader plays an essential role in supporting the overall success of Southern Fabricators. Responsibilities Coordinate daily departmental tasks and assignments to ensure efficient workflow and consistent production performance. Perform all duties at the highest skill level required within the department. Assume leadership responsibilities when the Foreman or Supervisor is unavailable. Provide guidance, motivation, and hands-on support to department employees. Utilize company systems, including M2M and other enterprise resource planning (ERP) software, to review open order reports, manage work orders, and support production scheduling. Operate company computers and laptops to access production information, generate reports, and monitor departmental activities. Ensure all workstations and production cells have the necessary work assignments, materials, and resources to meet production goals. Monitor production performance, identify inefficiencies, and assist with implementing continuous improvement initiatives. Promote and maintain a safe, organized, and productive work environment by following and reinforcing company safety standards. Assist with employee training, on-the-job instruction, troubleshooting, and compliance with established company procedures. Provide support to employees by answering questions, addressing operational concerns, and assisting with technical challenges. Monitor work quality and ensure completed tasks meet company standards and customer specifications. Communicate effectively with Planning, Quality, Maintenance, and other departments to maintain production workflow and resolve operational issues. Identify and report equipment malfunctions, material shortages, quality concerns, and production delays to the appropriate supervisor. Assist with prioritizing work orders and adjusting daily assignments to meet changing production requirements. Maintain accurate production information, work order updates, and departmental documentation as required. Lead by example by demonstrating professionalism, accountability, teamwork, and a strong commitment to company values. Maintain consistent attendance, punctuality, and productivity while supporting departmental performance. Qualifications Strong working knowledge of the department's operations, equipment, tools, and safety procedures. Demonstrated leadership ability, including experience guiding, mentoring, or training team members. Proficiency in using enterprise resource planning (ERP) systems or production tracking software, including M2M. Ability to operate a laptop or computer to generate reports, review open orders, and manage production information. Strong understanding of manufacturing processes, production workflow, and departmental quality standards. Excellent communication, organizational, and problem-solving skills. Ability to work independently, prioritize responsibilities, and make effective decisions under pressure. Strong mechanical or technical aptitude relevant to the assigned department. Ability to identify production challenges and assist with implementing practical solutions. Knowledge of workplace safety procedures and proper use of personal protective equipment (PPE). Ability to communicate effectively with employees, supervisors, and personnel from other departments. Ability to maintain accurate records and complete required production documentation. Physical ability to stand, walk, bend, reach, and perform tasks associated with departmental operations. Ability to lift up to 100 lbs. Strong commitment to teamwork, productivity, accountability, and maintaining a positive work environment. Preferred Qualifications Previous experience serving as a Work Leader, Lead Operator, or similar leadership position in a manufacturing environment. Experience working in metal fabrication or industrial manufacturing operations. Familiarity with M2M software, production scheduling, and work order management. Experience training employees and supporting on-the-job training (OJT) programs. Knowledge of continuous improvement practices, production performance metrics, and workflow optimization. Experience coordinating production activities across multiple workstations or manufacturing cells. Key Skills Strong leadership, technical knowledge, communication, and organizational skills are essential for coordinating departmental operations and supporting employee performance. The ability to use M2M and other production tracking systems allows the Work Leader to manage work orders, monitor production activities, and maintain an efficient workflow. Problem-solving, decision-making, and time management skills help address production challenges, prioritize assignments, and maintain productivity. Effective teamwork, safety awareness, and the ability to train and guide employees contribute to a positive, accountable, and productive manufacturing environment. These skills ensure the Work Leader can support departmental operations and maintain continuity when a Foreman or Supervisor is unavailable. Additional Note This position is not limited to the duties listed above. The Foreman or Supervisor may assign additional tasks as needed to support departmental operations, production requirements, and organizational objectives. Compensation details: 18-26 Hourly Wage PIf2f489114da0-1031

Job Description Job Description Description Accutemp Engineering, Inc. Stoneham, MA Hybrid Field & Office $60-$75/hour, with potential for higher compensation based on experience, certifications, and licensing Build and Program the Systems That Make Buildings Perform Accutemp Engineering is seeking an experienced HVAC Controls Programmer to join our growing Building Automation and Controls team. This is a hands-on technical role for someone who understands both the programming side of building automation and how HVAC equipment actually operates in the field. You'll be responsible for programming, integrating, commissioning, troubleshooting, and optimizing Building Automation Systems across a variety of commercial HVAC applications. The ideal candidate will have strong experience with Tridium Niagara 4 (N4), Johnson Controls CCT programming software, and Johnson Controls FX platforms. Current Niagara certification is highly valued, and candidates who bring both controls-programming expertise and a strong electrical or mechanical background will stand out. This position offers a blend of office-based programming and field commissioning, giving you the opportunity to take projects from initial controls development through startup, testing, optimization, and final turnover. If you enjoy solving complex problems, working independently, and seeing the systems you program come to life in the field, this is an opportunity to make a direct impact at Accutemp. What You'll Do BAS Programming & Controls Development Program, configure, and modify Building Automation Systems for commercial HVAC applications. Develop and support Tridium Niagara 4 / N4 applications, including JACE and Supervisor stations. Program and configure Johnson Controls FX controllers and related BAS equipment. Develop and modify control logic using Johnson Controls CCT programming software. Build and configure: Control sequences Point databases Graphics Alarms Trends and histories Schedules Operator interfaces Equipment and system-level logic Translate written sequences of operation into functional BAS programming. Develop reusable programming standards and templates that improve consistency and commissioning efficiency. Maintain accurate controller programs, station databases, programming backups, graphics, and project files. System Integration Configure and troubleshoot BAS communication networks and third-party integrations. Integrate HVAC equipment and control devices using protocols including: BACnet/IP BACnet MS/TP Modbus Other common BAS communication protocols Perform point discovery, mapping, addressing, and database configuration. Troubleshoot communication failures, network conflicts, device addressing, and integration issues. Coordinate with equipment manufacturers, vendors, controls technicians, and other trades when integrating third-party devices. Startup, Commissioning & Troubleshooting Perform system startup and commissioning for new and existing BAS installations. Conduct point-to-point verification and functional performance testing. Verify sensors, actuators, controllers, equipment safeties, and sequences of operation. Diagnose and resolve programming, controller, network, field-device, and system-integration issues. Tune control loops and sequences to improve HVAC system stability, comfort, and energy performance. Review system trends and operating data to identify performance issues and optimization opportunities. Support project closeout, customer training, and final system turnover. HVAC Systems & Technical Coordination Program and commission controls for equipment such as: Air Handling Units Rooftop Units VAV systems Boilers Chillers Pumps Cooling towers Exhaust systems Hydronic systems Central plants Other commercial HVAC equipment Review mechanical plans, electrical schematics, control drawings, specifications, and sequences of operation. Work closely with Accutemp project managers, engineers, controls technicians, electricians, mechanical teams, and customers. Participate in project meetings and coordinate controls work with overall construction schedules. Identify design, programming, or installation issues early and communicate recommended solutions. What We're Looking For Required Qualifications Demonstrated experience programming Building Automation Systems (BAS) / Direct Digital Controls (DDC). Strong hands-on experience with Tridium Niagara 4 (N4). Experience programming or commissioning Johnson Controls FX systems. Experience with Johnson Controls CCT programming software strongly preferred. Ability to develop and modify HVAC control sequences from written sequences of operation. Strong understanding of commercial HVAC equipment and system operation. Working knowledge of BACnet/IP, BACnet MS/TP, Modbus, and BAS networking. Ability to read and interpret: Mechanical drawings Electrical schematics Wiring diagrams Control drawings Sequences of operation Strong troubleshooting and analytical skills. Ability to independently work through startup, commissioning, and programming issues. Strong written and verbal communication skills. Ability to manage multiple projects and priorities. Valid driver's license and ability to travel to project sites throughout the region. Preferred Qualifications Current Tridium Niagara 4 / N4 Certification Experience programming Niagara JACE and Supervisor applications Advanced experience with Johnson Controls FX Strong experience with CCI / Control Concepts Experience creating reusable BAS programming standards, templates, graphics, alarm strategies, and trend standards Experience integrating third-party HVAC systems and equipment Experience with energy optimization and system-performance analysis Experience supporting controls projects from engineering through commissioning and customer turnover Strong electrical troubleshooting background Massachusetts Electrical License - Major Plus If you are a licensed Massachusetts electrician, we would be especially interested in speaking with you. A controls programmer who combines BAS programming expertise with electrical field knowledge and licensing would bring exceptional value to this position. What Success Looks Like A successful HVAC Controls Programmer at Accutemp will: Produce reliable, well-organized control programming. Complete startup and commissioning efficiently. Understand how HVAC systems should operate-not just how the controls are programmed. Diagnose programming and field issues quickly. Maintain clean, accurate program backups and project documentation. Communicate effectively with technicians, engineers, project managers, and customers. Identify problems before they affect project schedule or system performance. Deliver BAS systems that operate efficiently, reliably, and according to the intended sequence of operation. Help develop programming standards that can be reused across future projects. Work Environment This is a hybrid field and office position. The role will include: Office-based controls programming and engineering support Remote system troubleshooting when appropriate Field startup and commissioning Customer and project-site visits Collaboration with Accutemp's project and field teams The amount of field versus office work will vary depending on project schedules and commissioning needs. Benefits Compensation $60-$75 per hour Accutemp may consider higher compensation for candidates with exceptional controls experience, advanced Niagara expertise, highly relevant certifications, or a Massachusetts electrical license. Vehicle & Travel Support Depending on experience and position structure, Accutemp will provide either: Company vehicle, or Vehicle allowance The position also includes a company gas card for business travel. Competitive pay 401(k) with 6% match after 1 year Company-provided comprehensive health insurance, including EAP programs Comprehensive Dental insurance Paid Life AD&D insurance Paid sick time Paid time off 10 paid holidays Tuition reimbursement program Paid training Employee referral program Professional development assistance Company-provided uniforms Company-sponsored events Why Join Accutemp Engineering? This role offers the opportunity to work on technically challenging commercial HVAC systems while having real ownership of the controls programming and commissioning process. You'll work with experienced mechanical, electrical . click apply for full job details

Job Description Job Description At TechSite, we are committed to keeping our customers' mission-critical facilities running smoothly, ensuring you can stay connected and operate with confidence. We expertly plan, design, build, test, operate, and maintain these essential spaces, aiming to maximize reliability and efficiency with speed, expertise, and a commitment to customer satisfaction. TechSite is seeking an experienced facilities professional to join our team as an Assistant Chief Engineer in a structured succession role. This position is designed to prepare the successful candidate for promotion to Chief Engineer within approximately 6-9 months through hands-on training, operational leadership, and mentorship from our current leadership team. The ideal candidate has progressed from a technical maintenance background into facilities leadership and is ready to take the next step into a Chief Engineer position. What You'll Do This is more than a traditional assistant role. The Assistant Chief Engineer will work alongside the current Chief Engineer to learn every aspect of a complex, mission-critical facility while serving as a technical leader, customer liaison, and supervisor for the on-site maintenance team. The successful candidate will balance leadership responsibilities with hands-on technical involvement, ensuring the reliability, safety, and continuous improvement of critical building infrastructure. Key Responsibilities Facility Operations & Reliability Support the daily operation, monitoring, maintenance, and troubleshooting of critical building infrastructure, including: Electrical distribution systems HVAC and air handling equipment Mechanical systems Plumbing systems Building Automation Systems (BMS) Life Safety Systems Assist with preventive, predictive, and corrective maintenance programs to maximize equipment reliability. Monitor and utilize BMS, CMMS, PME, and other facility monitoring platforms. Review equipment manuals, electrical diagrams, and technical documentation to support maintenance activities. Participate in troubleshooting and emergency response during critical equipment failures. Leadership & Team Development Supervise and support a team of maintenance technicians, a maintenance coordinator, and controls personnel. Provide technical guidance, coaching, and mentoring to maintenance staff. Assist with scheduling, workload management, and on-call rotations. Help develop SOPs, MOPs, training programs, and maintenance procedures. Foster a culture of accountability, safety, teamwork, and continuous improvement. Customer & Operational Management Serve as one of TechSite's primary points of contact with the customer, providing professional communication and operational updates. Coordinate contractors, vendors, and service providers. Support maintenance planning, budgeting, reporting, compliance activities, and capital improvement projects. Monitor maintenance expenditures and assist with budget management. Ensure contractual obligations and service level expectations are consistently achieved. Continuous Improvement Identify opportunities to improve maintenance procedures, documentation, equipment reliability, and operational efficiency. Support implementation and ongoing administration of a Computerized Maintenance Management System (CMMS). Assist with quality initiatives and process improvements that enhance facility performance. Safety & Compliance Promote a strong safety culture. Ensure compliance with OSHA, NFPA, company standards, and customer requirements. Participate in emergency response, incident investigations, and after-action reviews. What You'll Bring: Required Qualifications High School Diploma or GED required; technical degree or certification preferred. 5-7+ years of progressively responsible experience in: Critical facilities Commercial facilities Industrial maintenance Healthcare Data centers Utilities Similar mission-critical environments Strong knowledge of electrical, HVAC, mechanical, plumbing, controls, and life safety systems. Experience troubleshooting complex building systems. Experience with preventive maintenance programs and equipment reliability. Working knowledge of Microsoft Office applications. Strong written and verbal communication skills. Ability to lead technical teams while maintaining strong customer relationships. Preferred Qualifications Previous experience as an Assistant Chief Engineer, Chief Engineer, Facilities Manager, Lead Engineer, or similar leadership role. Electrical systems experience preferred; strong mechanical backgrounds will also be considered. Experience with: CMMS administration Building Management Systems (BMS) Maintenance planning Contractor management Budget administration Process improvement initiatives Leadership experience supervising maintenance personnel or technical teams. Preferred Certifications EPA Universal Certification Journeyman Electrician Stationary Engineer License OSHA 10 or OSHA 30 Certified Facility Manager (CFM) BOMI Designations First Aid / CPR Or equivalent industry certifications Work Schedule Primarily Monday-Friday during normal business hours. Participate in an on-call rotation. Must be available to respond to after-hours emergencies when required. Ability to report to the facility within one hour while on call. Why Join TechSite? Competitive Pay: $120-150k, depending on experience. Benefits Package: Medical, dental, vision, and retirement savings plans Paid Time Off: Generous vacation, sick leave, and flexible time off Company Culture: On-site fitness center, office contests, team outings, and a collaborative work environment Career Growth: Professional development and continuing education opportunities Recognition: We've been nominated multiple years as a "Best Place to Work"-join a team that values collaboration and excellence. Career Path This is a structured succession position with a defined pathway to Chief Engineer . During the first several months, the successful candidate will work alongside the current Chief Engineer to gain comprehensive knowledge of the facility, customer expectations, maintenance operations, and TechSite standards. Promotion to Chief Engineer is based on demonstrated technical competency, leadership ability, operational readiness, and business needs.

Job Description Job Description Position Summary The Assistant Chief Engineer assists the Chief Engineer in the operation, maintenance, and repair of all hotel facilities, equipment, and building systems. This leadership position requires extensive experience in a full-service hotel environment, with a strong understanding of guest room operations, meeting and event spaces, food and beverage facilities, life safety systems, and preventative maintenance programs. The Assistant Chief Engineer is responsible for helping lead the Engineering team while ensuring exceptional guest satisfaction, associate engagement, regulatory compliance, and asset protection. Essential Functions Engineering Operations Maintain the physical property, equipment, and facilities to brand and ownership standards. Oversee maintenance and repair of HVAC, plumbing, electrical, refrigeration, kitchen equipment, boilers, chillers, and mechanical systems. Ensure guest rooms, public spaces, restaurants, lounges, meeting rooms, fitness center, pool, and back-of-house areas remain in excellent condition. Respond to guest and associate maintenance concerns promptly and professionally. Coordinate and prioritize daily work orders. Preventative Maintenance Assist in managing the hotel's preventative maintenance program. Ensure all scheduled inspections and maintenance tasks are completed on time. Monitor guest rooms and public spaces for maintenance deficiencies. Maintain accurate records of repairs, inspections, and equipment performance. Qualifications Required Minimum 1-2 years of progressive engineering experience in a full-service hotel environment. Minimum 1-2 years of supervisory or leadership experience within a hotel engineering department. 1st Class Stationary Engineer License Demonstrated experience supporting hotels with restaurants, banquet operations, meeting space, and extensive guest room inventories. Strong working knowledge of: HVAC systems Electrical systems Plumbing systems Refrigeration systems Boilers and chillers Building automation systems Life safety systems Strong troubleshooting and problem-solving skills. Ability to work flexible schedules, including nights, weekends, holidays, and on-call rotations. Physical Requirements Ability to lift up to 50 pounds regularly. Ability to climb ladders, work on rooftops, and access confined spaces. Ability to stand, walk, bend, kneel, and perform physical labor throughout the workday. Ability to work both indoors and outdoors in varying weather conditions.

Job Description Job Description Description: Job Title: Digital Specialist I Pay: $16-$17 Reports To: Digital Manager or Digital Supervisor Summary: This Position is responsible for ensuring that customers Data is accurately reviewed, prepared, and delivered according to SOP's and customer requirements. This position requires attention to detail, organization, accuracy, and adherence to quality-control procedures. Essential Functions Review completed jobs to ensure all required processing steps have been completed before delivery Follow established Delivery Department procedures and quality-control checklists Verify that files are complete, accessible, properly named, and organized according to customer specifications Upload and deliver customer files through approved systems, including FTP, ShareFile, or other designated platforms. Immediately report errors, discrepancies, missing information, or processing issues to the appropriate supervisor or manager. Maintain confidentiality and security of customer records and information at all times Maintain an organized and clean work area Perform other duties related to the Delivery Department as assigned by management Requirements: Requirements Strong attention to detail and accuracy Ability to follow established procedures, SOPs, and checklists Ability to prioritize and manage multiple jobs simultaneously Understanding of the need to set and meet departmental productivity benchmarks and quality standards. Well organized and detail oriented. Able to work both on a team and individually. Work Environment: Must be able to tolerate heat in the summer and cold in the winter. Physical Demands: While performing the duties of this job, the employee is regularly required to stand and walk. Must be able to reach, handle, carry, and lift between 10 lbs. and up to 50 lbs. While performing job duties, the employee is regularly required to talk, hear, read, and identify numbers for accurate order filling and receiving of material. Education and Eligibility Requirements Must be able and willing to communicate effectively in English. Must have skill and proficiency using a computer workstation and scanner systems. Ability to trouble-shoot computer problems as they relate to electronic document conversion. Must be able and willing to work overtime hours as needed. Must have a positive and respectful attitude towards both coworkers and customers. Must be able and willing to follow Company policies and procedures. Other duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the applicant for this job. Activities, duties, and responsibilities may change at any time with or without notice. Notice of AI Use in Job Application Review As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate's qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.