76 jobs found

Job Description Job Description LINX is hiring Low Voltage Technicians in Chantilly,VA to install, terminate, and test structured cabling on commercial construction projects, paying $20.00 to $29.00 an hour depending on tier and experience. You won't be working the same building every week. LINX's Enterprise division runs cabling into corporate offices, hospitals, K-12 and higher education campuses, small data centers, and other commercial or industrial environments so the work stays varied and the skills you build transfer everywhere. If you already own your tools and know your way around a punch-down block, there's a clear, defined path here from Technician I through Technician III and beyond. Where This Role Fits at LINX Technician I Technician II Technician III Lead Technician Foreman Superintendent Project Manager Senior Project Manager Operations Manager. What You'll Be Doing Cable Installation & Termination Install, terminate, and test structured cabling systems for CAT5e, CAT6, CAT6a, fiber optic, and coaxial cable runs Pull, suspend, fireproof, terminate, and test cable in accordance with BICSI standards, NEC, and local code Closet & Rack Build-Out Build and maintain MDFs and IDFs, including racks, patch panels, wire management systems, and network hardware Troubleshoot low voltage cable systems and correct installation issues as they surface Quality & Documentation Document every installation for compliance with industry standards and project specifications Deliver organized, professional workmanship that meets spec on every run Site Professionalism & Customer Service Communicate directly and professionally with site contacts to resolve technical issues and provide solutions Deliver organized, high-quality workmanship on every installation to meet project specifications and exceed customer expectations Travel to job sites within your home state as assigned, with occasional travel elsewhere in the country when project needs require it Minimum Requirements Required - Technician I (applies to all levels): Able to work on ladders and use power tools; able to lift, carry, and set up a 50-pound box or ladder Must own low voltage hand tools (snips, strippers, screwdrivers, wrenches) Available to work 2nd or 3rd shift, overtime, and under deadline pressure Must pass a 7-year criminal background check, pre-employment drug screen, and physical Valid driver's license, reliable transportation, and current auto insurance Professional working proficiency in English, written and verbal Required - Technician II (all Technician I requirements, plus): 1+ year of commercial low voltage installation experience Able to terminate a jack, pull cable, and "work a 90" proficiently with limited supervision Able to install, terminate, and test CAT5e, CAT6, CAT6a, fiber optic, and coaxial cable proficiently Able to build out MDF and IDF closets, including racks, patch panels, wire management, and network hardware with limited supervision Required - Technician III (all Technician II requirements, plus): 2+ years of commercial low voltage installation experience Able to terminate a jack, pull cable, and "work a 90" proficiently with no supervision Able to install, terminate, and test CAT5e, CAT6, CAT6a, fiber optic, and coaxial cable with no supervision Able to build out MDF and IDF closets, including racks, patch panels, wire management, and network hardware with no supervision This Role Is Probably Not Right For You If You've never worked hands-on with structured cabling, and you're looking for an IT help desk or desktop support role instead You need the same job site and the same routine every day, this work moves between offices, schools, and healthcare facilities You'd rather work solo than as part of a crew - Team LINX means making each other better and winning together, not going it alone Preferred (Not Required) Commercial construction experience BICSI Technician or Installer certification (Copper or Optical Fiber) Powder Actuated Tools Certification Confined Space Certification CPR and First Aid certification Manufacturer certifications for installation and maintenance (Fluke, Fujikura, Sumitomo, Corning, Hilti) High school diploma Compensation & Benefits Pay Rate: Technician I: $20.00-$23.00/hour. Technician II: $22.00-$25.00/hour. Technician III: $25.00-$29.00/hour. Benefits: 401(k) with 50% employer match on the first 5% contributed Medical, dental, and vision insurance with FSA and HSA options Short and long-term disability coverage 8 paid holidays 3 weeks PTO (vacation and sick combined) Manufacturer training and certification support Structured advancement path from Technician I through Technician III and into Lead Technician About LINX Founded in 2003 by working industry practitioners, LINX has grown from a single Denver office into a national commercial low voltage contractor with active markets across the country. Our Enterprise division installs and supports structured cabling, fiber, and network infrastructure inside corporate offices, hospitals, K-12 and higher education campuses, and small data centers. As our commercial construction pipeline keeps expanding into new markets, technicians who build a track record here have a real, defined path up through Lead Technician, Foreman, and beyond. Equal Opportunity Statement We are an Equal Opportunity Employer and value diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. Posting Deadline This job posting is open until filled and may close at any time without notice. Company Description Join a team that connects people through technology. We design, install, and support commercial network cabling for data centers, multimedia, security, and wireless systems. In 2003, industry experts founded LINX to create the workplace they wanted-one built on integrity, teamwork, and innovation. These core values drive us daily, shaping a culture where employees grow and take pride in their work. Headquartered in Denver, CO, with regional offices in Chantilly, VA; Seattle, WA; Salt Lake City, UT; San Antonio, TX; Atlanta, GA; Cheyenne, WY; and Des Moines, IA, we're growing fast! With AI, remote work, and digital transformation accelerating, now is the time to build your future with LINX. Company Description Join a team that connects people through technology. We design, install, and support commercial network cabling for data centers, multimedia, security, and wireless systems. In 2003, industry experts founded LINX to create the workplace they wanted-one built on integrity, teamwork, and innovation. These core values drive us daily, shaping a culture where employees grow and take pride in their work. Headquartered in Denver, CO, with regional offices in Chantilly, VA; Seattle, WA; Salt Lake City, UT; San Antonio, TX; Atlanta, GA; Cheyenne, WY; and Des Moines, IA, we're growing fast! With AI, remote work, and digital transformation accelerating, now is the time to build your future with LINX.

Job Description Job Description Leapros Skilled Trades is actively hiring Data Center Technicians in Cedar Rapids, IA. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $20 to $30 Per Hour BOE Responsibilities: An Outside Plant (OSP) Technician installs, splices, tests, and repairs fiber optic and copper cable networks in aerial, underground, and buried environments . They are responsible for building infrastructure, performing fusion splicing, installing cabinets, and troubleshooting, often requiring 100% travel. This role demands adherence to safety standards, accurate documentation, and sometimes, emergency, after-hours work. Key Job Responsibilities Fiber Splicing & Termination: Perform mechanical and fusion splicing on single-mode and multi-mode fiber cables. Outside Plant Installation: Place, rearrange, and remove aerial, underground, and buried cable, including placing cable in conduits or on poles. Testing & Troubleshooting: Use OTDR (Optical Time-Domain Reflectometer) and Fluke testers to troubleshoot, test, and certify fiber/copper, identifying faults. Infrastructure Support: Build cable vaults, maintain manholes, and install closures. Documentation: Accurately complete required paperwork, including time sheets, material transfers, and work orders. Qualifications and Physical Requirements Experience: Typically requires experience in the structured cabling or OSP industry. Physical Strength: Ability to lift up to 50 lbs, move up to 75 lbs, and work in confined spaces. Technical Skills: Knowledge of color codes, fiber handling, and using tools like bucket trucks or splicing trailers. Flexibility: Willingness to work in various weather conditions, at heights Pay Transparency The anticipated salary range for this position is $20 to $30 Per Hour, based on relevant factors such as experience, skills, education, internal equity, and geographic location. Final compensation will be determined during the interview process by the hiring authority. Benefits Summary We offer a comprehensive benefits package that includes: Medical, dental, and vision insurance Paid Sick Time Employee assistance programs (EAP) Leapros serves a tight community of proven, skilled tradespeople. As a team member, you are treated with the respect which your value has earned you. This means competitive pay, consistent work, a safety culture that starts at the top, and safety training. We know you, your lifestyle, and your needs. We are committed to our core values and guiding ethical principles, to conducting business in a non-discriminatory manner, and to operating in strict compliance with applicable federal and state laws pertaining to Equal Employment Opportunity. This commitment enhances our ability to conduct business with the highest level of integrity, solidifying our position as the most trusted workforce solutions partner. To learn more about Leapros visit our website at .

Job Description Job Description Overview About M.C. Dean M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking an Electronics Associate 2 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Join M.C. Dean as an Electronics Associate and launch your career through a structured 2-year development program that combines hands-on training with classroom instruction. As part of this program, you will build essential technical skills and safety knowledge, gain real-world field experience alongside industry professionals, and prepare to advance into a Field Technician role with long-term career growth opportunities. Learn and apply safety procedures on active job sites Track, inspect, and maintain tools and equipment daily Assist with installation raceways, cabling, racks, panels, and hardware to NEC standards Train in terminating, testing, and configuring electronic devices, network, and IT equipment Support racking, stacking, and cable terminations for head-end systems Participate in daily safety and project meetings Attend classroom training and complete technical modules to build trade skills Collaborate with teammates and contribute to a positive work environment Take on increasing responsibility and independence throughout the 2-year program Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and must meet eligibility requirements, for access to classified information; ability to obtain a security clearance is desired. Requirements: High School diploma or GED 1 year of applicable electronics experience Must successfully pass a pre-employment aptitude test College level math course is required, if not, one must be completed within the first 30 days of employment Interest in electronics, technology systems, or skilled trades Willing to travel up to 25% Ability to work safely, follow instructions, and thrive in a team environment Strong communication and time management skills Willingness to work on construction sites and adhere to safety regulations Commitment to completing a 2-year structured development program Ability to pass a drug test and background check Valid Real ID drivers license and reliable transportation Participation in employer-sponsored college coursework is required. Associates must successfully complete required coursework to remain in the program; failure to do so may result in separation from employment and repayment of education expenses in accordance with program or reimbursement agreements. Pay rate: Starting pay $23/hr Additional clearance incentive/hourly rate for candidates with ACTIVE polygraph clearances What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for over 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Job Description Job Description Overview This Hiring Event requires the candidate to be present at our location in-person to qualify. Wednesday, September 23rd, 2026 - 9AM - 3PM Marriott North Austin Round Rock 2600 La Frontera Blvd, Round Rock, TX 78681 The locations supported in this event are across the state of Texas and require varying degrees of travel. Locations include but not limited to: Abilene, Austin, Amarillo, Burlington, Claude, Dallas, Fort Hood, Fort Stockton, Goodfellow AFB, Haskell, Houston, Hutto, Killeen, Lackland AFB, Lancaster, Laughlin AFB, Laredo, Randolph AFB, Red Oak, San Antonio, Sheppard AFB, Temple, Waco, etc. DISCLAIMER: If you do not attend the hiring event you will not be qualified for this position. About M.C. Dean M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking an Electronics Associate to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Join M.C. Dean as an Electronics Associate and launch your career through a structured 2-year development program that combines hands-on training with classroom instruction. As part of this program, you will build essential technical skills and safety knowledge, gain real-world field experience alongside industry professionals, and prepare to advance into a Field Technician role with long-term career growth opportunities. Learn and apply safety procedures on active job sites Track, inspect, and maintain tools and equipment daily Assist with installation raceways, cabling, racks, panels, and hardware to NEC standards Train in terminating, testing, and configuring electronic devices, network, and IT equipment Support racking, stacking, and cable terminations for head-end systems Participate in daily safety and project meetings Attend classroom training and complete technical modules to build trade skills Collaborate with teammates and contribute to a positive work environment Take on increasing responsibility and independence throughout the 2-year program Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and must meet eligibility requirements, for access to classified information; ability to obtain a security clearance is desired. Requirements: High School diploma or GED Must successfully pass a pre-employment aptitude test College level math course is required, if not, one must be completed within the first 30 days of employment Interest in electronics, technology systems, or skilled trades Willing to travel up to 25% Ability to work safely, follow instructions, and thrive in a team environment Strong communication and time management skills Willingness to work on construction sites and adhere to safety regulations Commitment to completing a 2-year structured development program Ability to pass a drug test and background check Valid Real ID drivers license and reliable transportation Participation in employer-sponsored college coursework is required. Associates must successfully complete required coursework to remain in the program; failure to do so may result in separation from employment and repayment of education expenses in accordance with program or reimbursement agreements. Pay rate: Starting pay $20/hr Additional clearance incentive/hourly rate for candidates with ACTIVE polygraph clearances What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for over 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave Abilities: The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Job Description Job Description Low Voltage AV Technicians needed for Large Commercial Projects We are seeking a skilled and detail-oriented Low Voltage AV Technicians to join our dynamic and professional team. In this critical role, you will be responsible for the installation of low voltage systems for new commercial construction, ensuring optimal performance and safety standards. Your expertise will be pivotal in projects that involve structured cabling, security systems, network infrastructure, and other low voltage electrical systems. Join us in delivering high-quality electrical solutions and become an essential part of our success. Our Low Voltage Electricians enjoy excellent benefits including: A competitive salary and weekly pay Paid time off - vacation and holiday Medical, dental, vision, life and disability insurance 401k PPE provided for free Free skills and safety training Unlimited $500 referral bonuses - FREE MONEY! Requirements of the Low Voltage AV Technician: 3 + Years Low Voltage experience AV experience In-depth knowledge of low voltage systems such as security systems, fire alarms, CCTV, networking, and telecommunications Familiarity with electrical code requirements and safety standards for low voltage systems Proficiency in using electrical and hand tools for low voltage applications Lift Certification a plus Reliable transportation Able to pass drug test Able to pass background check If you meet the qualifications, please apply now with your resume. COME JOIN THE RAMS FAMILY! We look forward to hearing from you! RAMS works with the largest and smallest Electrical, Mechanical and Plumbing contractors in the area. We are offering an exciting position in the Commercial Construction field. While working with RAMS, you get to test out the local contractors to see who you would like to work with. A very large percentage of our employees decide to stay with RAMS! We offer ongoing training courses for FREE to our employees. We want you to SUCCEED! We offer a full benefit package after probation period.

Job Description Job Description Required Qualifications Aurora, IL NOTE: This is not a Full-Time position After Hrs (5p-8am) and Weekend Support AS NEEDED (Dispatch) Network Technician / Data Center Support • Higher education or degree preferred (but not required) or foreign equivalent required from an accredited institution. Will also consider 1-3 years of progressive experience in the specialty in lieu of every year of education. 2+ years of experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices Candidate will be part of onsite team maintaining network environment in support of physical touch (Smart Hands) support of Incident and or Requests. He/she will be providing Incident support by working with remote Level 2/3 teams to assist in resolving outages fixing issues including replacement of cabling or hardware components. He/she will be providing Service Request Support working with remote Network Support Teams to install hardware or patch cables to enable new services for customers. Candidate will be participating in Hardware Rack & Stack installation of both Network and Server equipment, cable management, and installation of required Fiber and Copper Patch leads, providing console access to Remote Team for configuration if required and testing connectivity after installation and configuration. Other related tasks required: Receive Hardware shipments for data center equipment landings Validation Purchase Order accuracy of Hardware received Unboxing and Recycling of materials Move Equipment from dock to staging areas and or to DC racks Installation or retrofitting of server racks - rail and shelving installation Power and network cable installation and cable management Scanning and Labeling of installed devices (network or server) Designate parts identified for spare part stock inventory Proper e-waste handling and disposal Equipment shipping and receiving as needed Provide Escort Service for vendors/techs Work Request Tasks from Service Now ticket system Ability to withstand working in a hot enclosed environment for short time spans required (i.e., data center hot isles) Must be able to perform work while on a ladder (use of ladders is required for top of rack installations) Must be able to work independently as well as in teams of 3-4 and be flexible. Must be able to lift 35 lbs. solo. Must be willing to travel between buildings using personal car/foot. May be required to walk/sit/stand/crawl/kneel for extended periods. Must have excellent customer service skills and written/verbal communication skills. Requires knowledge of Microsoft suite (Outlook, Excel, and Word primarily), Windows 10. The job entails working in datacenters, networking rooms. Should be able to communicate by telephone, email, or face to face. Preferred Qualifications Experience in Structured Network Cabling Company Description We are committed to delivering exceptional services and professionals with proven work ethics and processes. Provide an exceptional client experience Deliver on our commitments Build trust by thinking and acting with integrity Create an environment that inspires innovation Company Description We are committed to delivering exceptional services and professionals with proven work ethics and processes. Provide an exceptional client experience Deliver on our commitments Build trust by thinking and acting with integrity Create an environment that inspires innovation

Job Description Job Description Required Qualifications Network Technician / Data Center Support • Higher education or degree preferred (but not required) or foreign equivalent required from an accredited institution. Will also consider 1-3 years of progressive experience in the specialty in lieu of every year of education. 2+ years of experience in racking, stacking, connecting, and providing basic configuration support of networking or server devices Candidate will be part of onsite team maintaining network environment in support of physical touch (Smart Hands) support of Incident and or Requests. He/she will be providing Incident support by working with remote Level 2/3 teams to assist in resolving outages fixing issues including replacement of cabling or hardware components. He/she will be providing Service Request Support working with remote Network Support Teams to install hardware or patch cables to enable new services for customers. Candidate will be participating in Hardware Rack & Stack installation of both Network and Server equipment, cable management, and installation of required Fiber and Copper Patch leads, providing console access to Remote Team for configuration if required and testing connectivity after installation and configuration. Other related tasks required: Receive Hardware shipments for data center equipment landings Validation Purchase Order accuracy of Hardware received Unboxing and Recycling of materials Move Equipment from dock to staging areas and or to DC racks Installation or retrofitting of server racks - rail and shelving installation Power and network cable installation and cable management Scanning and Labeling of installed devices (network or server) Designate parts identified for spare part stock inventory Proper e-waste handling and disposal Equipment shipping and receiving as needed Provide Escort Service for vendors/techs Work Request Tasks from Service Now ticket system Ability to withstand working in a hot enclosed environment for short time spans required (i.e., data center hot isles) Must be able to perform work while on a ladder (use of ladders is required for top of rack installations) Must be able to work independently as well as in teams of 3-4 and be flexible. Must be able to lift 35 lbs. solo. Must be willing to travel between buildings using personal car/foot. May be required to walk/sit/stand/crawl/kneel for extended periods. Must have excellent customer service skills and written/verbal communication skills. Requires knowledge of Microsoft suite (Outlook, Excel, and Word primarily), Windows 10. The job entails working in datacenters, networking rooms. Should be able to communicate by telephone, email, or face to face. Preferred Qualifications Experience in Structured Network Cabling Company Description We are committed to delivering exceptional services and professionals with proven work ethics and processes. Provide an exceptional client experience Deliver on our commitments Build trust by thinking and acting with integrity Create an environment that inspires innovation Company Description We are committed to delivering exceptional services and professionals with proven work ethics and processes. Provide an exceptional client experience Deliver on our commitments Build trust by thinking and acting with integrity Create an environment that inspires innovation

Amazon Web Services, Inc. is seeking an Infra Delivery Install Technician to build and expand AWS data center capacity. In this on-site role, you will install, rack, and cable servers, switches, and related infrastructure, executing build plans with precision and high ownership. You will run, label, and test fiber and copper cabling, perform hardware swaps and decommissions, and document all work in ticketing and asset systems. Partnering with operations and engineering teams, you will support capacity turns, adhere to strict security and safety standards, and help optimize installation workflows in a fast-paced, customer-obsessed environment. Responsibilities Install, configure, and cable data center infrastructure hardware for AWS services Perform on-site hardware swaps, upgrades, and decommissions following standard procedures Run, label, and test network and power cabling to meet quality and safety standards Troubleshoot infrastructure installation issues and coordinate with remote engineering teams Document work performed in ticketing systems and maintain accurate asset records Follow change management, security, and compliance policies in data center environments Collaborate with operations teams to support capacity expansions and new deployments Perform routine inspections and preventive maintenance on installed equipment Support incident response by providing on-site diagnostics and hands-on remediation Continuously improve installation workflows and contribute to best practices documentation Required Skills Data center hardware installation Server racking and stacking Structured cabling (fiber and copper) Network hardware installation Reading rack elevation and wiring diagrams Hardware troubleshooting Use of hand and power tools safely Ticketing and asset management systems Basic TCP/IP networking Change management and documentation

Amazon Web Services, Inc. (AWS) seeks an Installation Technician to deploy and support infrastructure that powers the world's leading cloud platform. In this field/on-site role, you will install, cable, and configure servers, network gear, and related hardware in AWS facilities and customer sites. You'll follow detailed implementation plans, maintain rigorous documentation, and uphold AWS's security and safety standards. Working in fast-paced, customer-obsessed teams, you'll collaborate with engineers, learn cutting-edge cloud technologies, and help deliver reliable, scalable infrastructure that supports millions of users worldwide. Responsibilities Install and configure AWS-related hardware and networking equipment at customer or AWS sites Follow detailed technical implementation plans and standard operating procedures Perform cable management, racking, stacking, labeling, and physical infrastructure setup Verify connectivity, run basic diagnostics, and escalate complex issues to engineers Document installations, updates, and site conditions in AWS tools and ticketing systems Collaborate with AWS operations, network, and data center teams to coordinate work Adhere to safety, security, and compliance standards in data center and customer environments Provide on-site support during cutovers, maintenance windows, and equipment upgrades Maintain inventory accuracy for equipment, components, and tools Continuously improve installation quality and speed using data and customer feedback Required Skills Hardware installation and troubleshooting Structured cabling and cable management Basic TCP/IP networking and connectivity testing Reading rack elevations and installation diagrams Use of hand and power tools safely Ticketing and documentation tools (e.g., Service Now, Jira) Basic Linux or Windows server familiarity Network equipment installation (switches, routers, firewalls) Physical security and compliance best practices Time management and task prioritization in the field

Amazon Web Services, Inc. is seeking an Infra Delivery Install Technician to build and expand AWS data center capacity. In this on-site role, you will install, rack, and cable servers, switches, and related infrastructure, executing build plans with precision and high ownership. You will run, label, and test fiber and copper cabling, perform hardware swaps and decommissions, and document all work in ticketing and asset systems. Partnering with operations and engineering teams, you will support capacity turns, adhere to strict security and safety standards, and help optimize installation workflows in a fast-paced, customer-obsessed environment. Responsibilities Install, configure, and cable data center infrastructure hardware for AWS services Perform on-site hardware swaps, upgrades, and decommissions following standard procedures Run, label, and test network and power cabling to meet quality and safety standards Troubleshoot infrastructure installation issues and coordinate with remote engineering teams Document work performed in ticketing systems and maintain accurate asset records Follow change management, security, and compliance policies in data center environments Collaborate with operations teams to support capacity expansions and new deployments Perform routine inspections and preventive maintenance on installed equipment Support incident response by providing on-site diagnostics and hands-on remediation Continuously improve installation workflows and contribute to best practices documentation Required Skills Data center hardware installation Server racking and stacking Structured cabling (fiber and copper) Network hardware installation Reading rack elevation and wiring diagrams Hardware troubleshooting Use of hand and power tools safely Ticketing and asset management systems Basic TCP/IP networking Change management and documentation

Job Description Job Description Duration: 3 months+ (long term opportunity; some people have been on project for over a year; likelihood to extend past the 3 month timeline) Start date : ASAP Location: data center in Lincoln, NE. Pay Rate $22/hour Data Center Field Installations Technician (L1) The Data Center Field Installations Technician (L1) is an entry-level technical role responsible for executing standardized in-rack installation activities within a data center environment. This includes rack builds, equipment racking and stacking, structured cabling, power connections, and cooling setup tasks (DX and direct-to-chip liquid cooling). This role provides hands-on support for deployment activities by following established procedures, checklists, and technical standards to ensure consistent, high-quality installations. Through accurate execution of installation tasks and adherence to defined processes, this role contributes to timely project delivery and minimizes rework or operational risk. The primary objective of this role is to complete all assigned installation activities in alignment with quality standards, safety requirements, and Service Level Agreements (SLAs). The Data Center Field Installations Technician (L1) is responsible for handling standard, low-complexity installation tasks, performing routine physical work, and using documented guidelines and supervision where required. Key Responsibilities Perform rack assembly and preparation (rail kits, PDUs, cable management, labeling) Rack and stack servers, network, and storage equipment according to design specifications Execute structured cabling (copper and fiber) including routing, dressing, and labeling Connect power cabling (A/B feeds) following defined redundancy standards Assist with in-rack airflow and cooling setup: Install blanking panels and airflow management components for DX-cooled environments Support airflow optimization through proper cable routing and rack layout Assist with direct-to-chip (D2C) liquid cooling connections under supervision (e.g., hose routing, quick disconnects) Follow installation documentation, diagrams, and method of procedures (MOPs) Conduct basic quality checks and report discrepancies or issues Maintain cleanliness and organization within racks and work areas Health & Safety Responsibilities Comply with all data center safety policies, procedures, and permit-to-work systems Use appropriate Personal Protective Equipment (PPE) for tasks (e.g., gloves, safety shoes, eye protection) Follow safe manual handling practices when lifting and installing equipment Adhere to electrical safety standards when working with power connections (under supervision) Follow safety procedures for direct-to-chip liquid cooling systems, including leak awareness and immediate reporting Maintain good housekeeping to prevent trip hazards (e.g., cable management, packaging disposal) Immediately report hazards, near misses, or incidents Requirements (L1) Basic understanding of data center environments and IT hardware components Familiarity with structured cabling practices (copper and/or fiber preferred) Awareness of rack infrastructure (PDUs, rails, cable management) Basic understanding of airflow management; exposure to DX or direct-to-chip (D2C) liquid cooling is a plus Ability to follow technical documentation and standard operating procedures Strong attention to detail and willingness to learn Ability to perform physical tasks (lifting, working in confined rack spaces, standing for extended periods) Basic understanding of health and safety practices in a technical environment Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process.

Job Description Job Description Data Center Field Installations Technician (L2) The Data Center Field Installations Technician (L2) is a developing technical role responsible for executing and overseeing in-rack installation activities of moderate complexity within a data center environment. This includes rack builds, equipment installation, structured cabling, power distribution, advanced cooling integration (DX and direct-to-chip liquid cooling), and initial system bring-up activities. This role works with greater autonomy and is responsible for interpreting installation designs, validating work quality, and supporting troubleshooting during deployment activities. Through proactive coordination and problem-solving, this role ensures installations are completed efficiently, accurately, and in alignment with technical standards and project timelines. The primary objective of this role is to deliver high-quality installation and validation outcomes while minimizing delays, rework, and SLA risks. The Data Center Field Installations Technician (L2) is responsible for managing standard to medium-complexity installation tasks, guiding L1 technicians, and resolving issues encountered during implementation. Key Responsibilities Lead rack build and in-rack deployment activities based on design documentation Interpret rack layouts, elevation diagrams, and cabling schematics Perform and validate rack & stack activities for servers, storage, and network equipment Execute and verify structured cabling (fiber and copper), including basic testing/validation Install and validate power connections (single/dual feed, PDUs, load considerations) Implement and optimize cooling solutions: Configure airflow best practices for DX-cooled environments Install and validate direct-to-chip (D2C) liquid cooling systems, including cold plates, hoses, manifolds, and quick disconnects Perform visual inspections for leaks and ensure proper routing, strain relief, and secure connections Perform initial system bring-up activities: Execute OS installation and basic configuration (in line with build standards and imaging processes) Validate hardware functionality (POST checks, BIOS/firmware baseline verification) Perform basic network connectivity checks where required Conduct post-installation quality assurance: Verify installations against design specifications and checklists Perform cable, power, and labeling audits Validate airflow and cooling setup (DX and D2C) Identify and remediate defects or escalate issues Identify and resolve installation issues, escalating when required Support and guide L1 technicians on best practices and procedures Coordinate with project teams, engineering, and operations for smooth delivery Update documentation and report installation progress and deviations Health & Safety Responsibilities Ensure compliance with all data center safety standards, permits, and procedures Actively promote safe working practices and intervene in unsafe situations Apply electrical safety awareness when working with powered equipment and PDUs Follow and enforce safe handling procedures for direct-to-chip liquid cooling systems (including leak prevention and response) Ensure proper use of PPE by self and supporting team members Conduct risk awareness during installations (e.g., heavy lifts, cable congestion, liquid connections) Maintain high standards of housekeeping and workspace safety Report and escalate hazards, incidents, and non-compliance issues Requirements (L2) Proven experience in data center installations or similar hands-on technical role Strong understanding of rack infrastructure, server, storage, and network hardware Proficiency in structured cabling (fiber and copper) and cable management best practices Experience with power distribution within racks (PDUs, dual feeds, redundancy concepts) Working knowledge of cooling methodologies: DX airflow management within racks Direct-to-chip (D2C) liquid cooling systems (installation, connection handling, and basic validation) Experience with system deployment activities: OS installation and imaging tools (e.g., PXE, ISO-based installs, or automated deployment tools) Basic BIOS/firmware configuration and hardware validation Familiarity with post-install validation and quality assurance processes Ability to read and interpret technical drawings, schematics, and MOPs Strong troubleshooting and problem-solving skills during installations Ability to work independently and guide junior technicians Good understanding of health and safety regulations in data center environments Physically capable of performing installation tasks in demanding environments Company Description Top Telecommunications Company Company Description Top Telecommunications Company

Job Description Job Description Positions available Data Center Field Installation Technician (L1) 45 open positions Data Center Field Installation Technician (L2) 45 open positions Onsite position in Abernathy, TX. Shift work required 1st, 2nd, & 3rd First shift: 7am to 4pm Second Shift: 3pm to 12am Third Shift: 11pm- 8am Location: Abernathy TX (onsite) For AI Data center build outs, and this would be supporting that program must be flexible to travel for training potentially 1 week before start (Travel is covered if needed for that training) L1 Techs will Perform repeatable tasks, liquid filling, scanning of inventory, labeling, positioning of components L1s have come from a military background or out of school with minimum of 5-6 months handling fiber cabling MUST HAVE Must have good attitude and we will train them Must Know basic rack and stack, basic cabling Data Center Field Installations Technician (L1) The Data Center Field Installations Technician (L1) is an entry-level technical role responsible for executing standardized in-rack installation activities within a data center environment. This includes rack builds, equipment racking and stacking, structured cabling, power connections, and cooling setup tasks (DX and direct-to-chip liquid cooling). This role provides hands-on support for deployment activities by following established procedures, checklists, and technical standards to ensure consistent, high-quality installations. Through accurate execution of installation tasks and adherence to defined processes, this role contributes to timely project delivery and minimizes rework or operational risk. The primary objective of this role is to complete all assigned installation activities in alignment with quality standards, safety requirements, and Service Level Agreements (SLAs). The Data Center Field Installations Technician (L1) is responsible for handling standard, low-complexity installation tasks, performing routine physical work, and using documented guidelines and supervision where required. Onsite - shift work - Abernathy, TX Key Responsibilities Perform rack assembly and preparation (rail kits, PDUs, cable management, labeling) Rack and stack servers, network, and storage equipment according to design specifications Execute structured cabling (copper and fiber) including routing, dressing, and labeling Connect power cabling (A/B feeds) following defined redundancy standards Assist with in-rack airflow and cooling setup: Install blanking panels and airflow management components for DX-cooled environments Support airflow optimization through proper cable routing and rack layout Assist with direct-to-chip (D2C) liquid cooling connections under supervision (e.g., hose routing, quick disconnects) Follow installation documentation, diagrams, and method of procedures (MOPs) Conduct basic quality checks and report discrepancies or issues Maintain cleanliness and organization within racks and work areas Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process. Company Description • What you didn't know about us: • Competitive salary • Health, Dental and Vision Benefits • Short/Long Term Disability and Critical Care/Illness Protection • Life Insurance and Retirement Plans • Employee Assistance Program • With this position, you will get the opportunity to work with our game changing clients and further advance your already valuable experience in the telecom industry! • We are Connectors. We thrive on 'quality over quantity' and put in the work building strong relationships. We create connections, discover qualities, uncover skills, and place people with accuracy. We are your true partner! • We are Collaborators. You'll be working with a wholly-owned subsidiary of Kelly and part of the Kelly Telecom division. It allows us to be as nimble and fiercely competitive as a startup while having the backing of a multibillion dollar publicly traded company which has been in business for 75 years. With direct access to hiring managers, services don't stop at standard recruiting processes. We use our expertise to improve your application skills and provide ongoing career support. • We give 24/7 Support. We are in this together. We provide around the clock availability, competitive employee benefits, and continuously check-in to make sure things are going smoothly. Check out our Glassdoor page! • Kelly Telecom is an equal opportunity employer and will consider all applications without regard to race, genetic information, sex, age, color, religion, national origin, veteran status, disability, or any other characteristic protected by law. • For more information click Equal Employment Opportunity is the law. • You should know: Your safety matters! Vaccination against COVID-19 may be a requirement for this job in compliance with current client and governmental policies. A recruiter will confirm and share more details with you during the interview process.

Job Description Job Description Data Center Field Installations Technician (L2) The Data Center Field Installations Technician (L2) is a developing technical role responsible for executing and overseeing in-rack installation activities of moderate complexity within a data center environment. This includes rack builds, equipment installation, structured cabling, power distribution, advanced cooling integration (DX and direct-to-chip liquid cooling), and initial system bring-up activities. This role works with greater autonomy and is responsible for interpreting installation designs, validating work quality, and supporting troubleshooting during deployment activities. Through proactive coordination and problem-solving, this role ensures installations are completed efficiently, accurately, and in alignment with technical standards and project timelines. The primary objective of this role is to deliver high-quality installation and validation outcomes while minimizing delays, rework, and SLA risks. The Data Center Field Installations Technician (L2) is responsible for managing standard to medium-complexity installation tasks, guiding L1 technicians, and resolving issues encountered during implementation. Key Responsibilities Lead rack build and in-rack deployment activities based on design documentation Interpret rack layouts, elevation diagrams, and cabling schematics Perform and validate rack & stack activities for servers, storage, and network equipment Execute and verify structured cabling (fiber and copper), including basic testing/validation Install and validate power connections (single/dual feed, PDUs, load considerations) Implement and optimize cooling solutions: Configure airflow best practices for DX-cooled environments Install and validate direct-to-chip (D2C) liquid cooling systems, including cold plates, hoses, manifolds, and quick disconnects Perform visual inspections for leaks and ensure proper routing, strain relief, and secure connections Perform initial system bring-up activities: Execute OS installation and basic configuration (in line with build standards and imaging processes) Validate hardware functionality (POST checks, BIOS/firmware baseline verification) Perform basic network connectivity checks where required Conduct post-installation quality assurance: Verify installations against design specifications and checklists Perform cable, power, and labeling audits Validate airflow and cooling setup (DX and D2C) Identify and remediate defects or escalate issues Identify and resolve installation issues, escalating when required Support and guide L1 technicians on best practices and procedures Coordinate with project teams, engineering, and operations for smooth delivery Update documentation and report installation progress and deviations Health & Safety Responsibilities Ensure compliance with all data center safety standards, permits, and procedures Actively promote safe working practices and intervene in unsafe situations Apply electrical safety awareness when working with powered equipment and PDUs Follow and enforce safe handling procedures for direct-to-chip liquid cooling systems (including leak prevention and response) Ensure proper use of PPE by self and supporting team members Conduct risk awareness during installations (e.g., heavy lifts, cable congestion, liquid connections) Maintain high standards of housekeeping and workspace safety Report and escalate hazards, incidents, and non-compliance issues Requirements (L2) Proven experience in data center installations or similar hands-on technical role Strong understanding of rack infrastructure, server, storage, and network hardware Proficiency in structured cabling (fiber and copper) and cable management best practices Experience with power distribution within racks (PDUs, dual feeds, redundancy concepts) Working knowledge of cooling methodologies: DX airflow management within racks Direct-to-chip (D2C) liquid cooling systems (installation, connection handling, and basic validation) Experience with system deployment activities: OS installation and imaging tools (e.g., PXE, ISO-based installs, or automated deployment tools) Basic BIOS/firmware configuration and hardware validation Familiarity with post-install validation and quality assurance processes Ability to read and interpret technical drawings, schematics, and MOPs Strong troubleshooting and problem-solving skills during installations Ability to work independently and guide junior technicians Good understanding of health and safety regulations in data center environments Physically capable of performing installation tasks in demanding environments Company Description Top Telecommunications Company Company Description Top Telecommunications Company

Job Description Job Description Summit Riser Systems, Inc. is currently seeking a telecom technician for our Seattle / Bellevue service area. Job duties would include: Installing fiber, and low voltage network cabling within building riser systems to include cable placement, termination, testing and labeling per code and EIA/TIA industry standards. Installing structured cabling within tenant suite spaces. Cleaning up and removing abandoned cabling and equipment from within building riser systems. Walking jobs and meeting with customers. Coordinating and overseeing junior technicians/temporary technicians. Closing out projects with the regional manager/corporate accounting. Conducting periodic audits of our building riser closets a and MPOE rooms. Conducting quality control checks for our installations. The applicant should be familiar with high-rise building phone room infrastructure, MPOE's, service provider technologies, circuit extensions and proper installation methods for fiber and copper cabling. The applicant should be familiar with local code requirements as they pertain to low voltage cabling installations (i.e. suspension methods, labeling, fire stopping, etc ). The applicant should be professional, reliable, accountable and be able to meet with Summit's customers and clients in person. The applicant should be able to think independently and resolve arising issues in a quickly matter for minimum to no impact to our clients The applicant should have a reliable vehicle with the ability to carry a 6' ladder and a traditional set of tools needed to do their job. The applicant should be familiar with the use of a computer and programs such as: Excel, Word and Outlook. Summit Riser Systems, Inc. is the largest "Riser Management" company in the Western United States. We have been in business for 20 years and our sole business objective is to provide the best customer and building riser system management service possible. We currently provide telecom infrastructure services to over 900 buildings in California, Colorado, Texas and Washington.

Job Description Job Description Charleston, SC: Low Voltage Field Service Technician Are you ready to take your technical skills to the next level in a dynamic and innovative work environment? Totality Solutions, a leader in low-voltage installations, is hiring skilled technicians in the Charleston, SC region. If you have a passion for low voltage cabling, CCTV systems, and technology troubleshooting, we'd love to meet you! What You'll Be Doing As a Low Voltage Field Service Technician with Totality Solutions, you'll work within the Charleston, SC region to install, connect and troubleshoot the critical technology that powers local businesses and communities. Your responsibilities will include: Structured cabling (installing and terminating Cat5/Cat6) Neat cable management and labeling Installing and troubleshooting CCTV and access control systems Performing networking support and resolving system issues Troubleshooting commercial IT systems to resolve customer concerns Communicating with your supervisors to ensure site and scope goals are achieved Work independently or with a team across various environments: warehouses, retail, restaurant, offices, etc. Who We're Looking For We're seeking proactive, detail-oriented individuals who are eager to grow with us. Our ideal candidate has: 2+ years of experience in low-voltage cabling or security systems 1+ years of experience in CCTV and/or commercial networking Certifications such as BICSI Technician or NICET (preferred but not required) Strong communication, troubleshooting, and teamwork skills A valid driver's license and reliable transportation Professional conduct and communication at all times Why Join Totality Solutions? At Totality Solutions, we know our team is the foundation of our success. Here's what we offer: Benefits Contribution Plan: Up to $400/month to contribute toward your preferred medical insurance coverage Career Development : Paid training and certifications to advance your skills. Paid Time off : Incentive programs and EPTO (Earned Paid Time Off) to support work-life balance. Exciting Projects : Work on impactful installations throughout Charlotte and nearby communities. Supportive Culture: Be part of a collaborative team that values your expertise. Travel Cost Reimbursements: Eligible expenses for fuel and travel reimbursed Service Areas Primary: Charleston, SC Surrounding Areas: Summerville, Goose Creek, North Charleston, Mount Pleasant Take the Next Step If you're ready to join a forward-thinking team where your skills make a real impact, apply today. Help us power the next generation of low-voltage solutions in the Charleston, SC region and surrounding areas. Company Description Totality Solutions is a rapidly expanding and fast-paced company, so we're dedicated to helping you develop your career in this industry. Network field engineers have the opportunity to collaborate with other talented professionals on cutting-edge projects. If you're looking for virtually limitless growth opportunities and competitive compensation, you've come to the right place. Company Description Totality Solutions is a rapidly expanding and fast-paced company, so we're dedicated to helping you develop your career in this industry. Network field engineers have the opportunity to collaborate with other talented professionals on cutting-edge projects. If you're looking for virtually limitless growth opportunities and competitive compensation, you've come to the right place.

Job Description Job Description Telepro Communications is currently hiring an Analog / Digital Phone Technician to join our Telepro division. We are looking for a dependable and experienced technician who has knowledge in phone systems, low voltage cabling, troubleshooting, installation, and service work. Position Summary The Analog / Digital Phone Technician will be responsible for installing, servicing, troubleshooting, and maintaining analog and digital phone systems for commercial projects and service calls. This position requires someone who can work in the field, communicate professionally with customers, and complete work safely and correctly. Responsibilities Install, service, and troubleshoot analog and digital phone systems. Work with phone lines, extensions, jacks, cabling, and related low voltage equipment. Troubleshoot phone system issues, including no dial tone, line issues, connection problems, and equipment failures. Install and terminate low voltage cabling as needed. Test phone lines and verify proper operation. Read basic work orders, service tickets, and job instructions. Communicate with supervisors, customers, and team members regarding job status. Maintain tools, equipment, and company vehicle if assigned. Follow company safety procedures and job site requirements. Assist with other low voltage or communication system tasks as needed. Requirements Experience with analog and/or digital phone systems preferred. Low voltage, telecom, cabling, or service technician experience preferred. Ability to troubleshoot and problem-solve in the field. Must be able to use basic hand tools and testing equipment. Must have reliable transportation. Must have a valid driver's license. Must be dependable, punctual, and willing to work. Ability to work on ladders, lift equipment/materials, and work in commercial job sites. Must be able to pass company requirements, if applicable. Preferred Experience Phone system installation and service. Analog lines, digital phones, PBX systems, or VoIP knowledge. Low voltage cabling, Cat5/Cat6, terminations, and testing. Commercial service work. Experience with troubleshooting existing phone systems. Company Description Telepro Communications is a low voltage and communications company based in Mission, Texas. We provide installation, service, and support for communication systems, intercom systems, paging systems, structured cabling, and other low voltage solutions throughout the Rio Grande Valley. We take pride in delivering dependable service, quality workmanship, and professional support to our customers. Our team works on a variety of commercial and field projects, giving employees the opportunity to grow their skills, gain hands-on experience, and be part of a team-focused work environment. Company Description Telepro Communications is a low voltage and communications company based in Mission, Texas. We provide installation, service, and support for communication systems, intercom systems, paging systems, structured cabling, and other low voltage solutions throughout the Rio Grande Valley. We take pride in delivering dependable service, quality workmanship, and professional support to our customers. Our team works on a variety of commercial and field projects, giving employees the opportunity to grow their skills, gain hands-on experience, and be part of a team-focused work environment.

Job Description Job Description Job description Must be comfortable with a lot of travel. Candidates will need to be working out of different locations within a 72 hour notice. Client will provide all travel arrangements. Position summary The Traveling Data Center Installation Technician travels to customer sites to support new data center launches, expansions, and equipment deployments. The technician receives, moves, assembles, positions, and equips server racks and cabinets, also referred to as data towers, according to approved layouts and instructions. The position supports safe, accurate project completion through component installation, cable routing, inventory control, quality checks, and installation records. Essential duties and responsibilities Receive, unpack, inspect, and stage racks, servers, network equipment, cables, and installation materials. Report shortages, damage, and discrepancies. Move and position racks and cabinets using approved rack movers, pallet jacks, lifting devices, and team handling methods. Verify placement against floor plans and measurements. Assemble racks and install rails, brackets, shelves, panels, and cable management hardware using appropriate tools and specified torque requirements. Mount servers and authorized components in designated rack positions following installation drawings, manufacturer instructions, and customer standards. Route, secure, dress, and label copper and fiber cables; make approved connections while protecting cable bend radius, connectors, airflow, and service access. Perform assigned visual inspections and basic installation or connectivity checks within the technician's training and authorization. Escalate defects and technical issues to qualified personnel. Record asset identifiers, serial numbers, rack locations, completed tasks, and discrepancies in inventory systems, work orders, and installation checklists. Coordinate with deployment leads, customer representatives, warehouse teams, and technical staff to sequence work and meet project milestones. Follow site access, confidentiality, asset protection, and data security requirements. Use required personal protective equipment and electrostatic discharge controls. Follow applicable equipment handling, electrical safety, and energy isolation procedures. Stop and report unsafe work. Operate powered material handling equipment only after required training and site authorization. Use mechanical assistance and team handling for heavy or awkward equipment. Maintain clean, organized work areas, remove packaging, and segregate waste under site procedures. Complete handoff records and support resolution of installation punch list items. Perform related deployment or assigned home site duties consistent with training and business needs. Scope of authorized work Electrical circuit installation energized electrical work, equipment energization, and advanced server or network configuration require separately qualified and authorized personnel. This role performs only tasks within the approved project scope and the employee's training. Required qualifications High school diploma or equivalent, or equivalent relevant training and experience. At least one year of related experience in data center deployment, server rack assembly, hardware installation, electronics assembly, structured cabling, or comparable equipment installation. Ability to read work instructions, rack elevations, floor plans, diagrams, part numbers, and installation checklists. Ability to use hand tools, approved power tools, and measuring devices safely and accurately. Basic computer skills for inventory transactions, work orders, email, and project documentation. Ability to travel for extended assignments and work assigned schedules, including nights, weekends, and overtime when required. Strong attention to detail, dependable attendance, clear communication, and ability to collaborate with different site teams. Preferred qualifications Experience in customer data centers or large-scale technology deployment environments. Familiarity with server components, rack hardware, copper and fiber cabling, asset tracking, and electrostatic discharge precautions. Relevant technical training or certifications such as CompTIA A+, structured cabling training, or material handling equipment training. Travel and scheduling expectations This traveling field position requires frequent overnight travel and temporary assignments away from the employee's home location. Travel percentage, assignment duration, reporting location, and work schedules will be communicated before deployment and may change with customer project needs. Between deployments, employees may support an approved local site in related operational duties. Travel arrangements, lodging, eligible expenses, and applicable allowances follow the approved company travel policy. Employees must accurately record all work and travel time as instructed. Travel time and overtime will be paid as required by applicable law and company policy. Physical demands and work environment Essential functions involve prolonged standing and walking, bending, kneeling, reaching, handling tools and small components, and pushing or pulling equipment with approved aids. Work may include lifting and carrying components up to 50 pounds, and accessing racks from approved platforms or ladders. Heavy or awkward items require mechanical assistance or team handling. Specific lifting limits and task frequencies must be confirmed through the site job assessment. Work occurs in data centers, staging areas, and warehouse or active deployment environments with equipment noise, temperature variation, restricted access, and nearby material handling activity. Employees must follow applicable site safety rules. Essential functions may be performed with or without reasonable accommodation. Performance expectations Complete installations accurately and within agreed project milestones. Maintain reliable asset and task records, promptly report discrepancies, and minimize avoidable damage and rework. Demonstrate safe work practices, protect customer assets and information, and communicate respectfully with colleagues and customers.