6 jobs found

Job Description Job Description Summary: A Fiber Characterization (FC) Technician will be experienced in all aspects of fiber optic testing and network troubleshooting. Responsible for all aspects of the field-testing process under the direction of a Technical Lead. Provides continuous updates to the TL & Project Manager about milestones; arriving on site, completing work, departing a site, etc., plus progress on the overall project and information which needs to be relayed to the customer. An FC Technician will be personally responsible for maintaining his/her respective certifications and test tools. Major Responsibilities / Duties Manage all Test Equipment which has been assigned to the project. Ensure that all assigned test equipment is current on calibration. Writing and presenting daily reports to the TL for customers' reference. Assigning specific tasks to subordinates (B-side technician) and monitoring their work ethics for efficiency, quality, and safety. Supervise all starts, breaks, and quitting time. Responsible for the accuracy in the test results of each technician by verifying data from opposite end before leaving the site. Must coordinate the timing and procedures of testing with B side. Perform testing within the customer's approved window. Responsible for the accuracy of all the final paperwork required and turned over to the customer in a timely manner. Completes quality assurance procedure and check the final reports for errors. Ensure the safety, quality, and efficiencies of our crew. Interfaces with customer contacts on projects and work orders. Provides technical support for customer contacts and Technicians on request. Attends project planning and progress meetings with or without the customer contacts assigned. Understands, adheres to, and promotes the Environmental, Health & Safety policies of Telecommunication standards. Position Qualifications / Requirements Must possess a valid US Driver's License. High school or equivalent. Vocational/Technical Business School desired. Think critically and problem solve. Handle confidential/sensitive information with discretion. Good judgment. Organizational skills. Customer service skills. Must have color vision and good hearing. Proficient with Microsoft Office and Vendor Specific Software. Strong technical aptitude. Minimum of 2 years telecommunications training and/or experience. Must have demonstrated proficiency and profitability at Fiber Characterization Technician (A & B) sides. Work Requirements Proficient use of all tools. Exfo OTDR, iOLM Power meter Fiber scope FastReporter Launch reels Fiber cleaning tools Use of Microsoft Office. General testing knowledge required. (Ex. Fibers, COWAN, BTAS, etc.) Good understanding of Exfo OTDR use A & B sides Good understanding of Chromatic Dispersion, Polarization Mode Dispersion, and ORL. EXFO Platforms FTB-200, FTB-1, FTB-4, FTB-500 (or later chassis) USB flash drive Fiber cleaning system (e.g., wet clean, Cletop, one-click, etc.) Must be able to adhere to a strict schedule and timelines. Must be able to interface and communicate directly with the local customer to ensure site access. Prolonged standing/sitting Climbing of stairs, ladders. Carrying of loads up and down stairs. Reaching and/or grasping. Stopping, walking, kneeling, bending, crawling, and crouching. Carrying, pushing and/or pulling. Finger and wrist dexterity and hand/eye coordination. Exposure to mechanical, electrical, and/or other hazards.

Job Description Job Description ASSIGNMENT RESPONSIBILITIES Note: All official drafts, documents and recommendations, as listed below, must be reviewed, finalized and approved / accepted by appropriate BPA manager or other federal personnel with the authority to do so. Provide technical advice and recommendations to Test and Energization (T&E) construction, operations and maintenance, and Project Management personnel, as well as design engineers and field System Protection Control (SPC) and Power System Control (PSC) staff. Provide technical support for testing and test documentation in the field. Review engineering designs to maintain conformance to existing policies and standards for installation of communications and fiber optic systems. Prepare accurate as built drawings for communications and fiber optic systems for review and approval by BPA manager / lead engineer. Prepare fiber optic system test summary reports for maintenance personnel for review and approval by BPA manager / lead engineer. With oversight from BPA manager / staff, coordinate the overall system acceptance testing of the Fiber Optic installations for the T&E Group during all aspects of the construction activities from planning, project management, to construction management, through energization, which includes facilitating communication and scheduling of fiber optic splicing, and crews associated with substation and line projects, internal electrical crews or contract electrical crews. Perform analysis of final fiber installations to be released for operational traffic and brief the emergency restoration coordinator regarding any and all pertinent data for the BPA restoration plan. Perform fiber Optical Time Domain Reflectometry (OTDR) testing of fiber optic reels. Perform fiber OTDR testing and fiber characterization testing of fiber optic plant installations to verify installations meet BPA specifications. Prepare various progress and status reports, test equipment requests and work-vehicle requirements for review and approval by BPA manager / lead engineer. REQUIREMENTS Education & Corresponding Experience (required on matrix) Associate's or Bachelor's Degree in engineering technology, mathematics, computer science, engineering technician, or related field is preferred. With an applicable Bachelor's Degree, 10 years of experience in a technical/engineering environment is required. With an applicable Associate's Degree, 12 years of experience in a technical/engineering environment is required. Without a degree, 14 years of experience in a technical/engineering environment is required. Required Technical Skills & Experience (required on matrix) 8 years of directly related practical work experience performing fiber characterization or OTDR testing and reporting test results. Working knowledge of Microsoft Office Suite (Outlook, Excel and Word). Preferred Skills & Experience (optional on matrix) Knowledge of engineering concepts, principals, and practices applicable to components and facilities found on a regional transmission system. Additional Requirements (not required on matrix) Valid U.S. Driver's License is required.

Job Description Job Description Summary: A Fiber Characterization (FC) Technician will be experienced in all aspects of fiber optic testing and network troubleshooting. Responsible for all aspects of the field-testing process under the direction of a Technical Lead. Provides continuous updates to the TL & Project Manager about milestones; arriving on site, completing work, departing a site, etc., plus progress on the overall project and information which needs to be relayed to the customer. An FC Technician will be personally responsible for maintaining his/her respective certifications and test tools. Major Responsibilities / Duties Manage all Test Equipment which has been assigned to the project. Ensure that all assigned test equipment is current on calibration. Writing and presenting daily reports to the TL for customers' reference. Assigning specific tasks to subordinates (B-side technician) and monitoring their work ethics for efficiency, quality, and safety. Supervise all starts, breaks, and quitting time. Responsible for the accuracy in the test results of each technician by verifying data from opposite end before leaving the site. Must coordinate the timing and procedures of testing with B side. Perform testing within the customer's approved window. Responsible for the accuracy of all the final paperwork required and turned over to the customer in a timely manner. Completes quality assurance procedure and check the final reports for errors. Ensure the safety, quality, and efficiencies of our crew. Interfaces with customer contacts on projects and work orders. Provides technical support for customer contacts and Technicians on request. Attends project planning and progress meetings with or without the customer contacts assigned. Understands, adheres to, and promotes the Environmental, Health & Safety policies of Telecommunication standards. Position Qualifications / Requirements Must possess a valid US Driver's License. High school or equivalent. Vocational/Technical Business School desired. Think critically and problem solve. Handle confidential/sensitive information with discretion. Good judgment. Organizational skills. Customer service skills. Must have color vision and good hearing. Proficient with Microsoft Office and Vendor Specific Software. Strong technical aptitude. Minimum of 2 years telecommunications training and/or experience. Must have demonstrated proficiency and profitability at Fiber Characterization Technician (A & B) sides. Work Requirements Proficient use of all tools. Exfo OTDR, iOLM Power meter Fiber scope FastReporter Launch reels Fiber cleaning tools Use of Microsoft Office. General testing knowledge required. (Ex. Fibers, COWAN, BTAS, etc.) Good understanding of Exfo OTDR use A & B sides Good understanding of Chromatic Dispersion, Polarization Mode Dispersion, and ORL. EXFO Platforms FTB-200, FTB-1, FTB-4, FTB-500 (or later chassis) USB flash drive Fiber cleaning system (e.g., wet clean, Cletop, one-click, etc.) Must be able to adhere to a strict schedule and timelines. Must be able to interface and communicate directly with the local customer to ensure site access. Prolonged standing/sitting Climbing of stairs, ladders. Carrying of loads up and down stairs. Reaching and/or grasping. Stopping, walking, kneeling, bending, crawling, and crouching. Carrying, pushing and/or pulling. Finger and wrist dexterity and hand/eye coordination. Exposure to mechanical, electrical, and/or other hazards.

Job Description Job Description Summary: A Fiber Characterization (FC) Technician will be experienced in all aspects of fiber optic testing and network troubleshooting. Responsible for all aspects of the field-testing process under the direction of a Technical Lead. Provides continuous updates to the TL & Project Manager about milestones; arriving on site, completing work, departing a site, etc., plus progress on the overall project and information which needs to be relayed to the customer. An FC Technician will be personally responsible for maintaining his/her respective certifications and test tools. Major Responsibilities / Duties Manage all Test Equipment which has been assigned to the project. Ensure that all assigned test equipment is current on calibration. Writing and presenting daily reports to the TL for customers' reference. Assigning specific tasks to subordinates (B-side technician) and monitoring their work ethics for efficiency, quality, and safety. Supervise all starts, breaks, and quitting time. Responsible for the accuracy in the test results of each technician by verifying data from opposite end before leaving the site. Must coordinate the timing and procedures of testing with B side. Perform testing within the customer's approved window. Responsible for the accuracy of all the final paperwork required and turned over to the customer in a timely manner. Completes quality assurance procedure and check the final reports for errors. Ensure the safety, quality, and efficiencies of our crew. Interfaces with customer contacts on projects and work orders. Provides technical support for customer contacts and Technicians on request. Attends project planning and progress meetings with or without the customer contacts assigned. Understands, adheres to, and promotes the Environmental, Health & Safety policies of Telecommunication standards. Position Qualifications / Requirements Must possess a valid US Driver's License. High school or equivalent. Vocational/Technical Business School desired. Think critically and problem solve. Handle confidential/sensitive information with discretion. Good judgment. Organizational skills. Customer service skills. Must have color vision and good hearing. Proficient with Microsoft Office and Vendor Specific Software. Strong technical aptitude. Minimum of 2 years telecommunications training and/or experience. Must have demonstrated proficiency and profitability at Fiber Characterization Technician (A & B) sides. Work Requirements Proficient use of all tools. Exfo OTDR, iOLM Power meter Fiber scope FastReporter Launch reels Fiber cleaning tools Use of Microsoft Office. General testing knowledge required. (Ex. Fibers, COWAN, BTAS, etc.) Good understanding of Exfo OTDR use A & B sides Good understanding of Chromatic Dispersion, Polarization Mode Dispersion, and ORL. EXFO Platforms FTB-200, FTB-1, FTB-4, FTB-500 (or later chassis) USB flash drive Fiber cleaning system (e.g., wet clean, Cletop, one-click, etc.) Must be able to adhere to a strict schedule and timelines. Must be able to interface and communicate directly with the local customer to ensure site access. Prolonged standing/sitting Climbing of stairs, ladders. Carrying of loads up and down stairs. Reaching and/or grasping. Stopping, walking, kneeling, bending, crawling, and crouching. Carrying, pushing and/or pulling. Finger and wrist dexterity and hand/eye coordination. Exposure to mechanical, electrical, and/or other hazards.

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.