Power Generation Solutions LLC
Durham, North Carolina
Job Description Job Description The Lead Relay Technician (Protection and Control) leads the testing and commissioning of protection, control, and SCADA systems for new substations, from 34.5 kV collector substations through 345 kV transmission interconnections. This role serves as the on-site technical lead, directing contract test crews and junior technicians, coordinating with SCADA vendors and utility personnel, and ensuring systems are tested, documented, and ready for safe energization. This is a field-based position requiring travel of more than 75% to project sites, often for extended periods. Summary: We're leading the industry in sustainable energy careers. We understand that our employees are the lifeblood of the company. We strive to align company goals with those of our employees. We're constantly innovating to make a difference for our customers, our employees, and our planet. Our mission is to make a difference by developing cost-efficient alternatives to traditional energy sources, without long-term dependence on government subsidies. We're leading the industry in sustainable energy careers. We hope you'll join us. Essential Duties and Responsibilities: Lead protection and control testing and commissioning for 34.5 kV collector substations through 345 kV transmission interconnections Perform and direct testing of microprocessor-based relays from SEL, Siemens, and other manufacturers using Doble and/or Omicron test equipment Review relay settings, schematics, AC/DC elementaries, and wiring diagrams; identify discrepancies and maintain redlines Perform and oversee CT and PT testing, wiring verification, trip checks, and functional testing of protection schemes, including differential, distance, and breaker failure Perform point-to-point checkout of SCADA and communications systems and coordinate with SCADA vendors during device commissioning Coordinate with utility relay engineers and personnel for end-to-end testing, interconnection requirements, and energization Direct the daily work of contract test crews and junior technicians, and review their test results for accuracy and completeness Prepare and review test reports, commissioning documentation, and as-built markups for project turnover Support energization activities and troubleshoot protection, control, and communications issues Follow and enforce safe work practices, including NFPA 70E, lockout/tagout, and site safety requirements Maintain assigned tools, test equipment, PPE, and company-issued materials in good working condition Perform other duties as assigned by supervisor Education and/or Work Experience Requirements: High school diploma or GED Minimum of 5 years of experience in protective relay testing and substation commissioning Experience with protection schemes for 34.5 kV collector substations through 345 kV transmission interconnections, including feeder, transformer, and bus differential, line differential, distance, and breaker failure schemes Hands-on experience testing and commissioning microprocessor-based relays from SEL, Siemens, and other manufacturers, using test equipment such as Doble and/or Omicron Working knowledge of substation SCADA and communications systems, including RTUs, DNP3, and fiber networks, with the ability to perform point-to-point checkout and verify integration with protection systems NFPA 70E qualified electrical worker training and OSHA 10 certification PGS provides additional safety and technical training on an as-needed basis Valid driver's license and an acceptable driving record Associate's degree in electrical or electronics technology, or equivalent military training NETA Level III or IV certification Experience with IEC 61850 and coordinating with SCADA vendors during commissioning OSHA 30 certification Physical Requirements/Work Environment: This role requires the following, with or without reasonable accommodation: Field Works outdoors at project sites, with exposure to weather elements, including heat, cold, rain, and wind Walks and stands for extended periods on uneven terrain Climbs, kneels, crouches, stoops, and reaches Lifts and carries up to 60 pounds Works around noise, dust, moving equipment, and energized electrical equipment Wears required personal protective equipment (PPE), such as a hard hat, safety glasses, gloves, and safety-toe boots Travels between project sites, which may include operating a vehicle Works extended hours, nights, and weekends as needed to support testing and energization schedules Works in substation control enclosures and around high-voltage switchyard equipment Perks and Benefits : we offer medical/dental/vision insurance plans, PTO, and 401K with a company matching portion. About Us Strata Clean Energy is a leading developer, EPC, and service provider for utility-scale solar and storage systems in the United States. We control and self-perform all processes from our nationwide solar and storage developments, to construction, O&M, and Asset Management. Our employees are empowered to drive our business in a collaborative, creative, and passion-driven environment that fosters long-term professional growth. There is a lot to learn at Strata, but we're here to help you give your best and have a good time doing it. At Strata, you're part of something big. We're leading the industry in sustainable energy careers. We are driving innovation to make a difference for our customers, our employees, and our planet. Join us in powering the future. Strata Solar is an equal opportunity and affirmative action employer. Strata Solar is an equal employment and affirmative action employer whereby we do not engage in practices that discriminate against any person employed or seeking employment based on race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, marital status, disability, veteran status, genetic information or any other status or characteristic protected under applicable law.
Job Description Job Description The Lead Relay Technician (Protection and Control) leads the testing and commissioning of protection, control, and SCADA systems for new substations, from 34.5 kV collector substations through 345 kV transmission interconnections. This role serves as the on-site technical lead, directing contract test crews and junior technicians, coordinating with SCADA vendors and utility personnel, and ensuring systems are tested, documented, and ready for safe energization. This is a field-based position requiring travel of more than 75% to project sites, often for extended periods. Summary: We're leading the industry in sustainable energy careers. We understand that our employees are the lifeblood of the company. We strive to align company goals with those of our employees. We're constantly innovating to make a difference for our customers, our employees, and our planet. Our mission is to make a difference by developing cost-efficient alternatives to traditional energy sources, without long-term dependence on government subsidies. We're leading the industry in sustainable energy careers. We hope you'll join us. Essential Duties and Responsibilities: Lead protection and control testing and commissioning for 34.5 kV collector substations through 345 kV transmission interconnections Perform and direct testing of microprocessor-based relays from SEL, Siemens, and other manufacturers using Doble and/or Omicron test equipment Review relay settings, schematics, AC/DC elementaries, and wiring diagrams; identify discrepancies and maintain redlines Perform and oversee CT and PT testing, wiring verification, trip checks, and functional testing of protection schemes, including differential, distance, and breaker failure Perform point-to-point checkout of SCADA and communications systems and coordinate with SCADA vendors during device commissioning Coordinate with utility relay engineers and personnel for end-to-end testing, interconnection requirements, and energization Direct the daily work of contract test crews and junior technicians, and review their test results for accuracy and completeness Prepare and review test reports, commissioning documentation, and as-built markups for project turnover Support energization activities and troubleshoot protection, control, and communications issues Follow and enforce safe work practices, including NFPA 70E, lockout/tagout, and site safety requirements Maintain assigned tools, test equipment, PPE, and company-issued materials in good working condition Perform other duties as assigned by supervisor Education and/or Work Experience Requirements: High school diploma or GED Minimum of 5 years of experience in protective relay testing and substation commissioning Experience with protection schemes for 34.5 kV collector substations through 345 kV transmission interconnections, including feeder, transformer, and bus differential, line differential, distance, and breaker failure schemes Hands-on experience testing and commissioning microprocessor-based relays from SEL, Siemens, and other manufacturers, using test equipment such as Doble and/or Omicron Working knowledge of substation SCADA and communications systems, including RTUs, DNP3, and fiber networks, with the ability to perform point-to-point checkout and verify integration with protection systems NFPA 70E qualified electrical worker training and OSHA 10 certification PGS provides additional safety and technical training on an as-needed basis Valid driver's license and an acceptable driving record Associate's degree in electrical or electronics technology, or equivalent military training NETA Level III or IV certification Experience with IEC 61850 and coordinating with SCADA vendors during commissioning OSHA 30 certification Physical Requirements/Work Environment: This role requires the following, with or without reasonable accommodation: Field Works outdoors at project sites, with exposure to weather elements, including heat, cold, rain, and wind Walks and stands for extended periods on uneven terrain Climbs, kneels, crouches, stoops, and reaches Lifts and carries up to 60 pounds Works around noise, dust, moving equipment, and energized electrical equipment Wears required personal protective equipment (PPE), such as a hard hat, safety glasses, gloves, and safety-toe boots Travels between project sites, which may include operating a vehicle Works extended hours, nights, and weekends as needed to support testing and energization schedules Works in substation control enclosures and around high-voltage switchyard equipment Perks and Benefits : we offer medical/dental/vision insurance plans, PTO, and 401K with a company matching portion. About Us Strata Clean Energy is a leading developer, EPC, and service provider for utility-scale solar and storage systems in the United States. We control and self-perform all processes from our nationwide solar and storage developments, to construction, O&M, and Asset Management. Our employees are empowered to drive our business in a collaborative, creative, and passion-driven environment that fosters long-term professional growth. There is a lot to learn at Strata, but we're here to help you give your best and have a good time doing it. At Strata, you're part of something big. We're leading the industry in sustainable energy careers. We are driving innovation to make a difference for our customers, our employees, and our planet. Join us in powering the future. Strata Solar is an equal opportunity and affirmative action employer. Strata Solar is an equal employment and affirmative action employer whereby we do not engage in practices that discriminate against any person employed or seeking employment based on race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, marital status, disability, veteran status, genetic information or any other status or characteristic protected under applicable law.
AMPAM Parks Mechanical
San Diego, California
Job Description Job Description EST-4 Fire Alarm Programmer - Poway, CA AMPAM is a leading Mechanical, Electrical, and Plumbing (MEP) contractor serving large-scale multifamily and commercial projects across California. With 1,500 employees across multiple business units, we are committed to delivering quality, safety, and excellence in every project. In June 2026, AMPAM acquired Coastal Fire & Integration Systems ("Coastal"), a San Diego-area provider of fire protection, low-voltage, and life safety systems. This role will join the AMPAM team as a part of our Coastal Fire & Integration Systems acquisition. Qualifications The ideal candidate should: Possess experience programming Edwards EST-4 fire alarm systems. Possess troubleshooting experience on EST-4 fire alarm systems, including ground faults, communication issues, device troubles, network issues, and system programming conflicts. Possess strong computer skills, including the ability to use programming software, maintain electronic files, generate reports, and communicate by email. Hold a NICET Fire Alarm Systems certification. NICET Level II or higher preferred. Possess a working knowledge of low-voltage communication systems, fire alarm systems, emergency communication systems, and related building system interfaces. Be able to read and interpret fire alarm drawings, riser diagrams, device layouts, sequence of operations, submittals, specifications, and as-built documentation. Be familiar with applicable fire alarm codes and standards, including NFPA 72, California Fire Code, local AHJ requirements, and project specifications. Be able to travel to job sites, arrive on time, and be organized with required safety gear, tools, laptop/programming equipment, and necessary parts or materials. Have strong communication, analytical, and problem-solving skills. Be able to communicate professionally with project managers, field technicians, inspectors, general contractors, customers, vendors, and AHJs. Job Duties The EST-4 Fire Alarm Programmer will be responsible for: Fire alarm system programming associated with start-ups, changes, tenant improvements, system modifications, service work, and project closeout. Programming, downloading, uploading, backing up, and maintaining EST-4 fire alarm system files. Reviewing approved drawings, sequence of operations, device lists, and project specifications to ensure programming matches the intended system design. Performing fire alarm troubleshooting and repairs on EST-4 systems. Supporting system commissioning, pre-testing, final testing, and acceptance testing. Servicing, inspecting, testing, and installing fire alarm systems in accordance with prescribed standards, approved drawings, manufacturer requirements, and applicable codes. Coordinating with field technicians to verify device addressing, labeling, circuit connections, panel terminations, network communication, notification appliance operation, and system functionality. Testing and verifying initiating devices, notification appliances, control modules, monitor modules, relays, annunciators, power supplies, voice evacuation components, and related fire alarm equipment. Programming and testing system interfaces, which may include elevator recall, sprinkler monitoring, duct detector shutdown, door release, smoke control, monitoring connections, access control interface, and other building system integrations. Participating in inspections and acceptance testing with fire departments, AHJs, general contractors, owners, and other project stakeholders. Preparing and maintaining accurate documentation, including programming files, test reports, deficiency lists, as-built notes, and closeout information. Providing technical support to project managers, service technicians, inspection teams, and customers as needed. Safety: Complying with company and OSHA safety regulations to ensure safe work procedures in the workplace and on job sites. Additional Duties The comprehensive listing of activities, duties, or responsibilities required of the employee for this position may be in excess of what is listed herein. Duties, responsibilities, and activities may change at any time, with or without notice. Physical Requirements This position requires visual acuity and listening ability. Individuals must be able to stand, walk, kneel, bend, crawl, and crouch for long periods of time. Individuals may be required to climb ladders, scaffolding, stairs, and access equipment in mechanical rooms, electrical rooms, rooftops, parking structures, ceiling spaces, and other job site locations. Individuals must be able to lift, carry, push, and pull in excess of 50 pounds. This position may occasionally require individuals to work in high places, confined spaces, small cramped spaces, active construction sites, and occupied facilities. Applicants must be currently authorized to work in the U.S. on a full-time basis without future employment sponsorship Recruitment Agencies: To protect the interests of all parties, AMPAM WILL NOT accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to AMPAM, including unsolicited resumes sent directly to AMPAM leaders/managers/coworkers or to AMPAM's database will be considered AMPAM property. AMPAM will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Inquiries from external recruitment agencies should be directed ONLY to our talent acquisition team.
Job Description Job Description EST-4 Fire Alarm Programmer - Poway, CA AMPAM is a leading Mechanical, Electrical, and Plumbing (MEP) contractor serving large-scale multifamily and commercial projects across California. With 1,500 employees across multiple business units, we are committed to delivering quality, safety, and excellence in every project. In June 2026, AMPAM acquired Coastal Fire & Integration Systems ("Coastal"), a San Diego-area provider of fire protection, low-voltage, and life safety systems. This role will join the AMPAM team as a part of our Coastal Fire & Integration Systems acquisition. Qualifications The ideal candidate should: Possess experience programming Edwards EST-4 fire alarm systems. Possess troubleshooting experience on EST-4 fire alarm systems, including ground faults, communication issues, device troubles, network issues, and system programming conflicts. Possess strong computer skills, including the ability to use programming software, maintain electronic files, generate reports, and communicate by email. Hold a NICET Fire Alarm Systems certification. NICET Level II or higher preferred. Possess a working knowledge of low-voltage communication systems, fire alarm systems, emergency communication systems, and related building system interfaces. Be able to read and interpret fire alarm drawings, riser diagrams, device layouts, sequence of operations, submittals, specifications, and as-built documentation. Be familiar with applicable fire alarm codes and standards, including NFPA 72, California Fire Code, local AHJ requirements, and project specifications. Be able to travel to job sites, arrive on time, and be organized with required safety gear, tools, laptop/programming equipment, and necessary parts or materials. Have strong communication, analytical, and problem-solving skills. Be able to communicate professionally with project managers, field technicians, inspectors, general contractors, customers, vendors, and AHJs. Job Duties The EST-4 Fire Alarm Programmer will be responsible for: Fire alarm system programming associated with start-ups, changes, tenant improvements, system modifications, service work, and project closeout. Programming, downloading, uploading, backing up, and maintaining EST-4 fire alarm system files. Reviewing approved drawings, sequence of operations, device lists, and project specifications to ensure programming matches the intended system design. Performing fire alarm troubleshooting and repairs on EST-4 systems. Supporting system commissioning, pre-testing, final testing, and acceptance testing. Servicing, inspecting, testing, and installing fire alarm systems in accordance with prescribed standards, approved drawings, manufacturer requirements, and applicable codes. Coordinating with field technicians to verify device addressing, labeling, circuit connections, panel terminations, network communication, notification appliance operation, and system functionality. Testing and verifying initiating devices, notification appliances, control modules, monitor modules, relays, annunciators, power supplies, voice evacuation components, and related fire alarm equipment. Programming and testing system interfaces, which may include elevator recall, sprinkler monitoring, duct detector shutdown, door release, smoke control, monitoring connections, access control interface, and other building system integrations. Participating in inspections and acceptance testing with fire departments, AHJs, general contractors, owners, and other project stakeholders. Preparing and maintaining accurate documentation, including programming files, test reports, deficiency lists, as-built notes, and closeout information. Providing technical support to project managers, service technicians, inspection teams, and customers as needed. Safety: Complying with company and OSHA safety regulations to ensure safe work procedures in the workplace and on job sites. Additional Duties The comprehensive listing of activities, duties, or responsibilities required of the employee for this position may be in excess of what is listed herein. Duties, responsibilities, and activities may change at any time, with or without notice. Physical Requirements This position requires visual acuity and listening ability. Individuals must be able to stand, walk, kneel, bend, crawl, and crouch for long periods of time. Individuals may be required to climb ladders, scaffolding, stairs, and access equipment in mechanical rooms, electrical rooms, rooftops, parking structures, ceiling spaces, and other job site locations. Individuals must be able to lift, carry, push, and pull in excess of 50 pounds. This position may occasionally require individuals to work in high places, confined spaces, small cramped spaces, active construction sites, and occupied facilities. Applicants must be currently authorized to work in the U.S. on a full-time basis without future employment sponsorship Recruitment Agencies: To protect the interests of all parties, AMPAM WILL NOT accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to AMPAM, including unsolicited resumes sent directly to AMPAM leaders/managers/coworkers or to AMPAM's database will be considered AMPAM property. AMPAM will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Inquiries from external recruitment agencies should be directed ONLY to our talent acquisition team.