DCS Corp
Bedford, Massachusetts
DCS has an exciting opportunity for a Senior Systems Engineer providing support to the Air Force Life Cycle Management Center/ISR SOF (AFLCMC/HB). The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. AFLCMC/PEO ISR SOF is headquartered at Wright Patterson Air Force Base, OH with geographically separated operating units CONUS and OCONUS. This position supports the Advanced E7 Development and the FMS Division, supporting the Royal Saudi Air Force, as part of the International Airborne Battle Management Command and Control (FMS) Division; AFLMC(WIW). The WIW Division located at Tinker AFB (OK), and Hanscom AFB (MA), with dispersed support at Eglin AFB, Seattle WA, San Antonio TX and several OCONUS positions. This position specifically supports the Foreign Military Sales (FMS) Japan Program Office. This is a full-time position located at Hanscom Air Force Base, MA. Essential Job Functions: Duties include, but not limited to: Conduct comprehensive program portfolio reviews to evaluate and recommend alternative plans, enhance systems engineering processes, manage and sustain technical baselines, and design/perform system-level tests to ensure subsystem and system performance aligns with approved specifications. Review and evaluate alternative plans, systems engineering programs, designs, and test results to verify subsystem and system performance compliance with program specifications. Prepare technical documentation defining and recommending system/subsystem characteristics, management reports, and technical presentations for planning, implementation, and corrective actions, applying engineering economy principles. Perform system validations, including criteria and procedure development, and analyze/evaluate major engineering system results. Provide engineering, technical support, and training for programs/initiatives, including acquisition, development, integration, sustainment, evolution, deployment, fielding, installation, and operations oversight. Support risk management activities in alignment with Air Force Systems Engineering Assessment Model (AF SEAM) processes. Conduct formal trade studies considering engineering performance, effectiveness, cost-performance balance, lifecycle cost, reliability, maintainability, risk, and schedule. Offer technical recommendations through reviews, studies, audits, evaluations, analyses, procedural guidance, and documentation, supporting engineering Integrated Product Teams (IPTs). Analyze proposals to compare and quantify technical feasibility, compatibility, and cost-effectiveness of proposed systems and components. Concepts and Requirements Analysis: Review and analyze key documents, including Initial Capabilities Documents (ICDs), Capability Development Documents (CDDs), Capability Production Documents (CPDs), and Analyses of Alternatives (AoAs). Conduct assessments of military utility, operational concepts (CONOPs), technology development strategies, functional configuration audits (FCAs), physical configuration audits (PCAs), and technology standards profiles. Analyze system concepts and user requirements entered into system requirements baselines (functional, allocated, and product). Engineering Process Support: Assist in material solution analysis, technology development, engineering, manufacturing, production, deployment, and operations support. Provide support for engineering technical processes, including version/configuration control, requirements analysis, architecture design, implementation, integration, verification, validation, and decision analysis. Perform risk, configuration, technical data, and interface management, as well as technical planning and assessments. Technical Reviews and Documentation: Support planning and execution of technical reviews (e.g., System Requirements Review, Technology Readiness Assessments) and develop associated documentation (e.g., Systems Engineering Plan, Risk Management Plan). Develop systems engineering documentation, ensuring understanding of systems-of-systems interactions, configuration management, technical data packages, and acquisition/sustainment engineering processes. Travel: 10% Required Skills: Due to the sensitivity of the customer, U.S. citizenship is required. Must have a Secret Clearance. Bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, 5 of which must be in the DoD OR 15 years of directly related experience, 8 of which must be in the DoD. Desired Skills: Technical Skills Systems engineering expertise across documentation, requirements development, and CDRL review processes Strong capability in evaluating alternative technical plans, architectures, and engineering designs Experience conducting system-level testing, validations, FCAs/PCAs, and ensuring subsystem/system compliance with specifications Skilled in preparing technical documentation, management reports, and technical presentations for planning and corrective actions Proficiency in risk management aligned with AF SEAM, configuration/version control, and interface/technical data management Ability to perform trade studies balancing performance, lifecycle cost, reliability, maintainability, schedule, and risk Competence in analyzing ICDs, CDDs, CPDs, AoAs, and translating concepts and operational requirements into system baselines Interpersonal Skills Strong communication capabilities with clear, concise, and technically accurate messaging across diverse stakeholder groups Proactive, organized, and detail-oriented leadership style with the ability to drive outcomes without direct authority Demonstrated ability to build and maintain professional relationships within cross-functional and international environments High adaptability and situational awareness when navigating complex, multi-stakeholder modernization programs Effective collaborator within engineering IPTs, facilitating consensus, alignment, and informed decision-making Strong problem-solving abilities with a self-starter mindset, capable of independently identifying issues and recommending solutions Ability to lead through influence by fostering cooperation, transparency, and shared ownership of engineering objectives Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. The proposed salary range for this position is: Salary Range: $123,639 - $170,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives. We offer competitive compensation, benefits, and opportunities for learning and development. Our broad and competitive mix of benefits is designed to support and protect employees and their families. Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs. Learn more about our benefits here: DCS Corp Benefits.
DCS has an exciting opportunity for a Senior Systems Engineer providing support to the Air Force Life Cycle Management Center/ISR SOF (AFLCMC/HB). The Air Force Program Execution Office for Intelligence, Surveillance, Reconnaissance and Special Operations (PEO ISR SOF) has the collective Air Force Materiel Command (AFMC) mission responsibility to manage and execute the modernization, development, testing, production, fielding, and sustainment of the ISR SOF portfolio, which includes over 200 programs for the United States Air Force (USAF) and foreign allies. AFLCMC/PEO ISR SOF is headquartered at Wright Patterson Air Force Base, OH with geographically separated operating units CONUS and OCONUS. This position supports the Advanced E7 Development and the FMS Division, supporting the Royal Saudi Air Force, as part of the International Airborne Battle Management Command and Control (FMS) Division; AFLMC(WIW). The WIW Division located at Tinker AFB (OK), and Hanscom AFB (MA), with dispersed support at Eglin AFB, Seattle WA, San Antonio TX and several OCONUS positions. This position specifically supports the Foreign Military Sales (FMS) Japan Program Office. This is a full-time position located at Hanscom Air Force Base, MA. Essential Job Functions: Duties include, but not limited to: Conduct comprehensive program portfolio reviews to evaluate and recommend alternative plans, enhance systems engineering processes, manage and sustain technical baselines, and design/perform system-level tests to ensure subsystem and system performance aligns with approved specifications. Review and evaluate alternative plans, systems engineering programs, designs, and test results to verify subsystem and system performance compliance with program specifications. Prepare technical documentation defining and recommending system/subsystem characteristics, management reports, and technical presentations for planning, implementation, and corrective actions, applying engineering economy principles. Perform system validations, including criteria and procedure development, and analyze/evaluate major engineering system results. Provide engineering, technical support, and training for programs/initiatives, including acquisition, development, integration, sustainment, evolution, deployment, fielding, installation, and operations oversight. Support risk management activities in alignment with Air Force Systems Engineering Assessment Model (AF SEAM) processes. Conduct formal trade studies considering engineering performance, effectiveness, cost-performance balance, lifecycle cost, reliability, maintainability, risk, and schedule. Offer technical recommendations through reviews, studies, audits, evaluations, analyses, procedural guidance, and documentation, supporting engineering Integrated Product Teams (IPTs). Analyze proposals to compare and quantify technical feasibility, compatibility, and cost-effectiveness of proposed systems and components. Concepts and Requirements Analysis: Review and analyze key documents, including Initial Capabilities Documents (ICDs), Capability Development Documents (CDDs), Capability Production Documents (CPDs), and Analyses of Alternatives (AoAs). Conduct assessments of military utility, operational concepts (CONOPs), technology development strategies, functional configuration audits (FCAs), physical configuration audits (PCAs), and technology standards profiles. Analyze system concepts and user requirements entered into system requirements baselines (functional, allocated, and product). Engineering Process Support: Assist in material solution analysis, technology development, engineering, manufacturing, production, deployment, and operations support. Provide support for engineering technical processes, including version/configuration control, requirements analysis, architecture design, implementation, integration, verification, validation, and decision analysis. Perform risk, configuration, technical data, and interface management, as well as technical planning and assessments. Technical Reviews and Documentation: Support planning and execution of technical reviews (e.g., System Requirements Review, Technology Readiness Assessments) and develop associated documentation (e.g., Systems Engineering Plan, Risk Management Plan). Develop systems engineering documentation, ensuring understanding of systems-of-systems interactions, configuration management, technical data packages, and acquisition/sustainment engineering processes. Travel: 10% Required Skills: Due to the sensitivity of the customer, U.S. citizenship is required. Must have a Secret Clearance. Bachelor's degree in a related field and 12 years of experience in the respective technical/professional discipline being performed, 5 of which must be in the DoD OR 15 years of directly related experience, 8 of which must be in the DoD. Desired Skills: Technical Skills Systems engineering expertise across documentation, requirements development, and CDRL review processes Strong capability in evaluating alternative technical plans, architectures, and engineering designs Experience conducting system-level testing, validations, FCAs/PCAs, and ensuring subsystem/system compliance with specifications Skilled in preparing technical documentation, management reports, and technical presentations for planning and corrective actions Proficiency in risk management aligned with AF SEAM, configuration/version control, and interface/technical data management Ability to perform trade studies balancing performance, lifecycle cost, reliability, maintainability, schedule, and risk Competence in analyzing ICDs, CDDs, CPDs, AoAs, and translating concepts and operational requirements into system baselines Interpersonal Skills Strong communication capabilities with clear, concise, and technically accurate messaging across diverse stakeholder groups Proactive, organized, and detail-oriented leadership style with the ability to drive outcomes without direct authority Demonstrated ability to build and maintain professional relationships within cross-functional and international environments High adaptability and situational awareness when navigating complex, multi-stakeholder modernization programs Effective collaborator within engineering IPTs, facilitating consensus, alignment, and informed decision-making Strong problem-solving abilities with a self-starter mindset, capable of independently identifying issues and recommending solutions Ability to lead through influence by fostering cooperation, transparency, and shared ownership of engineering objectives Pay Range and Benefits: There are a variety of factors that can influence salary at DCS Corp, including but not limited to, geographic location, Federal Government contract labor categories and wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. The proposed salary range for this position is: Salary Range: $123,639 - $170,000 At DCS, we pride ourselves on providing flexibility that allows employees to balance meaningful work with their personal lives. We offer competitive compensation, benefits, and opportunities for learning and development. Our broad and competitive mix of benefits is designed to support and protect employees and their families. Our robust benefit offerings include medical, dental, 401k, ESOP, PTO, education reimbursement, work/life balance, parental and other leave programs. Learn more about our benefits here: DCS Corp Benefits.
Astrion
Hanscom Afb, Massachusetts
Job Description Job Description Overview Principal Data Links and Communications Engineer LOCATION : Hanscom AFB, MA Salary Range : $145-$155,000 annually depending on experience, certifications, and qualifications JOB STATUS: Full-time CLEARANCE : Top Secret/SCI TRAVEL: Limited, as needed Astrion has an exciting opportunity for a Principal Data Links and Communications Engineer for the EPASS Cyber and Networks Directorate (EPASS HN II) contract , supporting the Aerial Networks Division (AFLCMC/HNA) located at Hanscom AFB in Massachusetts . REQUIRED QUALIFICATIONS / SKILLS: Must be a US Citizen Must have and be able to maintain a Top Secret/SCI clearance Knowledge and experience with Link 22 and tatical data links engineering DESIRED QUALIFICATIONS / SKILLS: 5 Years experience in software design and software requirements development Proficiency in C++ an Java Programming languages and development frameworks Proficiency in MBSE modeling, languages, and tools (DODAF, SysML, UML, Cameo) Networking and embedded mission systems experience Familiarity with government acquisition planning, tailoring and documentation (Acquisition Strategy Plan, Statement of Work, System Engineering Plan, User Agreements, Product Roadmap). ADDITIONAL QUALIFICATIONS: Provide knowledge and experience in the development, integration, testing, and deployment of Air Force systems and their associated data links, to include definition of data link interoperability, interfaces, and verification and test assessment requirements. This includes interfacing with the Federal, Department of Defense (DoD), United States Air Force (USAF), United States Army, and Joint communities to ensure the data link communications capability complies with the applicable Federal Aviation Administration, Defense Information Systems Agency (DISA), National Security Agency (NSA), Service Acquisition Executive, Joint Mission Planning System (JMPS), Damage Assessment and Casualty Report business and technical rules. Provide resources with knowledge and experience in Developmental and Operational test and Evaluation at the sub-system and system level. This includes interface with Air Combat Command, Air Force Command and Control Integration Center, Joint Interoperability Test Command, Space and Naval Warfare Systems Command, and all levels of the organizations that develop and manage the C3 and encryption key distribution infrastructure for controlling a networked system, providing technical advice on C4 issues, including pre-launch conditioning and planning, aircraft-weapon pre- and post-release communications, and real-time targeting. The Contractor shall advise and assist the program Chief Engineer, Integrated Product Team (IPT) Leads, Program Managers (PMs), and joint combined test team customers on performance, schedule, and cost issues with respect to planning, communications, and control. The contractor will perform other duties as assigned. The candidate may be called upon for knowledge and experience in the following specific areas: Combat Net Radio (CNR) Test and Demonstration include engineering support for interoperability testing weapon configurations with Threshold and Objective launch platforms/controllers and ground Joint Terminal Attack Controllers over Ultra-High Frequency (UHF) CNR and Link 22 communications. Joint Concept of Employment (CONEMP) Cryptologic Systems Link 16 Networking Interface Control Digitally Aided Close Air Support (DACAS) United States Message Text Format (USMTF) Joint Interoperability of Tactical Command and Control Systems (JINTACCS) RESPONSIBILITIES: Support defining and documenting specifications for network-enabled weapon systems to ensure Link 16 J11.X message interoperability Interface with DoD and non-DoD federal agencies to ensure the data link communications capability complies with the applicable regulations Interface with Air Force, other services and agencies in support of developing communications equipment and managing encryption infrastructure for controlling a networked system Provide technical advice on Command, Control and Communications (C3) issues, including pre-launch conditioning and planning, networked weapons, and real-time targeting Advise and assist the staff Engineers, IPT members, PMs, and test team customers on performance, schedule, and cost issues with respect to planning, communications, and control Support defining and documenting a set of Combat Net Radio (CNR) networking parameter configurations to provide the best balance between flexible implementation of capability and implementation impact on both existing and emerging weapon systems Provide engineering support for interoperability testing weapon configurations over UHF CNR and Link 16 Support developing, documenting, and presenting a Joint Concept of Employment (CONEMP) which is flexible, scalable, and compatible with communications via Military tactical data exchange network Support developing and documenting Joint Service approaches for integrating weapons into existing TDL environments Support development and documentation of Link 16 J11.X messages within the construct of a Joint Service CM strategy that will maintain interoperability between weapon systems and controllers while supporting a flexible CONEMP
Job Description Job Description Overview Principal Data Links and Communications Engineer LOCATION : Hanscom AFB, MA Salary Range : $145-$155,000 annually depending on experience, certifications, and qualifications JOB STATUS: Full-time CLEARANCE : Top Secret/SCI TRAVEL: Limited, as needed Astrion has an exciting opportunity for a Principal Data Links and Communications Engineer for the EPASS Cyber and Networks Directorate (EPASS HN II) contract , supporting the Aerial Networks Division (AFLCMC/HNA) located at Hanscom AFB in Massachusetts . REQUIRED QUALIFICATIONS / SKILLS: Must be a US Citizen Must have and be able to maintain a Top Secret/SCI clearance Knowledge and experience with Link 22 and tatical data links engineering DESIRED QUALIFICATIONS / SKILLS: 5 Years experience in software design and software requirements development Proficiency in C++ an Java Programming languages and development frameworks Proficiency in MBSE modeling, languages, and tools (DODAF, SysML, UML, Cameo) Networking and embedded mission systems experience Familiarity with government acquisition planning, tailoring and documentation (Acquisition Strategy Plan, Statement of Work, System Engineering Plan, User Agreements, Product Roadmap). ADDITIONAL QUALIFICATIONS: Provide knowledge and experience in the development, integration, testing, and deployment of Air Force systems and their associated data links, to include definition of data link interoperability, interfaces, and verification and test assessment requirements. This includes interfacing with the Federal, Department of Defense (DoD), United States Air Force (USAF), United States Army, and Joint communities to ensure the data link communications capability complies with the applicable Federal Aviation Administration, Defense Information Systems Agency (DISA), National Security Agency (NSA), Service Acquisition Executive, Joint Mission Planning System (JMPS), Damage Assessment and Casualty Report business and technical rules. Provide resources with knowledge and experience in Developmental and Operational test and Evaluation at the sub-system and system level. This includes interface with Air Combat Command, Air Force Command and Control Integration Center, Joint Interoperability Test Command, Space and Naval Warfare Systems Command, and all levels of the organizations that develop and manage the C3 and encryption key distribution infrastructure for controlling a networked system, providing technical advice on C4 issues, including pre-launch conditioning and planning, aircraft-weapon pre- and post-release communications, and real-time targeting. The Contractor shall advise and assist the program Chief Engineer, Integrated Product Team (IPT) Leads, Program Managers (PMs), and joint combined test team customers on performance, schedule, and cost issues with respect to planning, communications, and control. The contractor will perform other duties as assigned. The candidate may be called upon for knowledge and experience in the following specific areas: Combat Net Radio (CNR) Test and Demonstration include engineering support for interoperability testing weapon configurations with Threshold and Objective launch platforms/controllers and ground Joint Terminal Attack Controllers over Ultra-High Frequency (UHF) CNR and Link 22 communications. Joint Concept of Employment (CONEMP) Cryptologic Systems Link 16 Networking Interface Control Digitally Aided Close Air Support (DACAS) United States Message Text Format (USMTF) Joint Interoperability of Tactical Command and Control Systems (JINTACCS) RESPONSIBILITIES: Support defining and documenting specifications for network-enabled weapon systems to ensure Link 16 J11.X message interoperability Interface with DoD and non-DoD federal agencies to ensure the data link communications capability complies with the applicable regulations Interface with Air Force, other services and agencies in support of developing communications equipment and managing encryption infrastructure for controlling a networked system Provide technical advice on Command, Control and Communications (C3) issues, including pre-launch conditioning and planning, networked weapons, and real-time targeting Advise and assist the staff Engineers, IPT members, PMs, and test team customers on performance, schedule, and cost issues with respect to planning, communications, and control Support defining and documenting a set of Combat Net Radio (CNR) networking parameter configurations to provide the best balance between flexible implementation of capability and implementation impact on both existing and emerging weapon systems Provide engineering support for interoperability testing weapon configurations over UHF CNR and Link 16 Support developing, documenting, and presenting a Joint Concept of Employment (CONEMP) which is flexible, scalable, and compatible with communications via Military tactical data exchange network Support developing and documenting Joint Service approaches for integrating weapons into existing TDL environments Support development and documentation of Link 16 J11.X messages within the construct of a Joint Service CM strategy that will maintain interoperability between weapon systems and controllers while supporting a flexible CONEMP
Blue Sky Innovators
Arlington, Virginia
Job Description Job Description Blue Sky Innovators is seeking a Senior Subject Matter Expert (USAF) to join our team in Arlington, VA. The SME will assist in developing, coordinating, and advising on the implementation of policies related to air, space, and cyberspace power to support the CSAF, AF/A3, NAF/Air Component Commanders and their Staffs. The SME will participate in the operational planning and analysis process and advise the JS and CCMDs on how to optimize USAF capabilities against operational challenges. This position will provide advice and assessments to validate that planning inputs are strategically sound, operationally and logistically feasible, and resource informed/supportable according to the pertinent policies. The SME must have situational awareness of, and provide recommendations about, the current political-military (Pol-Mil) issues and operational challenges associated with threats and priority regions as outlined within strategic planning guidance, e.g., the NDS, and be able to articulate the impact these have on USAF equities to senior leaders. The SME will advise on the use of wargaming and M&S techniques to transform the Air Force and support the design, development, and execution of strategic operational war games and related seminars and workshops. The SME will provide support and advice in preparing briefings and written material to senior leaders, including matters of national security. Requirements Familiar with Air Staff and joint administrative and operations instructions/procedures and can address programming, planning, budgeting, policy, and warfighting operational implications. Bachelor's degree from an accredited university or equivalent service academy. Ten years of combined federal (DoW or DoS) experience with five years total experience at MAJCOM, HAF or JS/CCMD J2/3/5/8. Proficient in the use of Microsoft Office Suite and other associated software utilized in personal computing, e.g., Adobe Acrobat. TS/SCI Clearance Desired Qualifications An advanced academic degree in areas such as regional studies, history, international affairs/relations, or national security/policy is (are) desired not required. Salary range for the position is $138,000 - $220,000 per year. Specific compensation will be determined by several factors including experience, education, skills, and knowledge. We also offer medical/dental/vision benefits and 401k contribution. Blue Sky Innovators, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you are a qualified job seeker with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access as a result of your disability. To request an accommodation, please email us at and provide your name and contact information. Please note: this is only for job seekers with disabilities requesting an accommodation.
Job Description Job Description Blue Sky Innovators is seeking a Senior Subject Matter Expert (USAF) to join our team in Arlington, VA. The SME will assist in developing, coordinating, and advising on the implementation of policies related to air, space, and cyberspace power to support the CSAF, AF/A3, NAF/Air Component Commanders and their Staffs. The SME will participate in the operational planning and analysis process and advise the JS and CCMDs on how to optimize USAF capabilities against operational challenges. This position will provide advice and assessments to validate that planning inputs are strategically sound, operationally and logistically feasible, and resource informed/supportable according to the pertinent policies. The SME must have situational awareness of, and provide recommendations about, the current political-military (Pol-Mil) issues and operational challenges associated with threats and priority regions as outlined within strategic planning guidance, e.g., the NDS, and be able to articulate the impact these have on USAF equities to senior leaders. The SME will advise on the use of wargaming and M&S techniques to transform the Air Force and support the design, development, and execution of strategic operational war games and related seminars and workshops. The SME will provide support and advice in preparing briefings and written material to senior leaders, including matters of national security. Requirements Familiar with Air Staff and joint administrative and operations instructions/procedures and can address programming, planning, budgeting, policy, and warfighting operational implications. Bachelor's degree from an accredited university or equivalent service academy. Ten years of combined federal (DoW or DoS) experience with five years total experience at MAJCOM, HAF or JS/CCMD J2/3/5/8. Proficient in the use of Microsoft Office Suite and other associated software utilized in personal computing, e.g., Adobe Acrobat. TS/SCI Clearance Desired Qualifications An advanced academic degree in areas such as regional studies, history, international affairs/relations, or national security/policy is (are) desired not required. Salary range for the position is $138,000 - $220,000 per year. Specific compensation will be determined by several factors including experience, education, skills, and knowledge. We also offer medical/dental/vision benefits and 401k contribution. Blue Sky Innovators, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you are a qualified job seeker with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access as a result of your disability. To request an accommodation, please email us at and provide your name and contact information. Please note: this is only for job seekers with disabilities requesting an accommodation.
Boeing
Daytona Beach, Florida
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking multiple Software Engineers (Associate/Experienced/Senior) to join the Mission Systems Software team located in Daytona Beach, FL. We are seeking a highly motivated Software Engineer to design and implement new capabilities in the Operational Flight Program (OFP) for both the United States Air Force (USAF) and international customers. The candidate will join one of the multi-discipline Agile scrum teams that develop, integrate, and maintain a wide range of aircraft functionalities. Software capabilities will be developed for the Advanced Display Core Processor II (ADCP II), the brains of the Eagle. The successful candidate will implement and test new cutting-edge capabilities and integrate them with a variety of other aircraft subsystems. At Boeing, our software engineers use their expertise to dream up next generation software capabilities for some amazing aerospace platforms. Boeing encourages its engineers to move up as technical leads as well as gives them opportunities to grow into management. Join us and you will have the unique opportunity to develop real-time embedded software for the most sophisticated military platforms in the world. Across Commercial, Defense and Global Services, our teams are developing software for next generation trainers; tactical fighter aircraft; helicopters; unmanned air vehicles; space, satellite, and weapons systems; state of the art flight simulators; cybersecurity solutions, and much more. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. Position Responsibilities: Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems Develops and maintains code and integrates software components into a fully functional software system Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met Executes and documents software research and development projects Serves as a subject matter expert for software domains, system-specific issues, processes and regulations Troubleshoots software issues Works under general direction This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Daytona Beach, FL. Basic Qualifications (Required Skills/ Experience): Bachelor Degree Active Secret Clearance 2+ years of experience in C, C++, C#, Python, Java, or Ada 2+ years of experience developing, documenting, and maintaining architectures, algorithms, interfaces, and designs for software systems Preferred Qualifications (Desired Skills/Experience): Level 3: 5 or more years' related work experience or an equivalent combination of education and experience Level 4: 9 or more years' related work experience or an equivalent combination of education and experience Agile/SAFe development experience Experience with DevOps tools, such as GitLab (CI/CD), Git Bash, Gradle, Jira, Jenkins, and Artifactory Ability to work effectively in a team environment and communicate with stakeholders of different backgrounds and skill levels Experience developing embedded real-time software Experience working with Real-time Operating Systems (RTOS) Travel: less than 10%. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate: $77,000.00 - $137,000.00 Summary pay range for Experienced: $98,000.00 - $173,000.00 Summary pay range for Senior: $124,000.00 - $220,000.00 Applications for this position will be accepted until Oct. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is currently seeking multiple Software Engineers (Associate/Experienced/Senior) to join the Mission Systems Software team located in Daytona Beach, FL. We are seeking a highly motivated Software Engineer to design and implement new capabilities in the Operational Flight Program (OFP) for both the United States Air Force (USAF) and international customers. The candidate will join one of the multi-discipline Agile scrum teams that develop, integrate, and maintain a wide range of aircraft functionalities. Software capabilities will be developed for the Advanced Display Core Processor II (ADCP II), the brains of the Eagle. The successful candidate will implement and test new cutting-edge capabilities and integrate them with a variety of other aircraft subsystems. At Boeing, our software engineers use their expertise to dream up next generation software capabilities for some amazing aerospace platforms. Boeing encourages its engineers to move up as technical leads as well as gives them opportunities to grow into management. Join us and you will have the unique opportunity to develop real-time embedded software for the most sophisticated military platforms in the world. Across Commercial, Defense and Global Services, our teams are developing software for next generation trainers; tactical fighter aircraft; helicopters; unmanned air vehicles; space, satellite, and weapons systems; state of the art flight simulators; cybersecurity solutions, and much more. We work in a casual but professional environment with multi-disciplined teams of engineers that take pride in developing, integrating, testing and delivering innovative solutions. There is long-term potential for career growth into technical leadership or management positions and we value the curiosity, tenacity and imagination our engineers bring to our teams each day. Position Responsibilities: Develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems Develops and maintains code and integrates software components into a fully functional software system Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met Executes and documents software research and development projects Serves as a subject matter expert for software domains, system-specific issues, processes and regulations Troubleshoots software issues Works under general direction This position is expected to be 100% onsite. The selected candidate will be required to work onsite at Daytona Beach, FL. Basic Qualifications (Required Skills/ Experience): Bachelor Degree Active Secret Clearance 2+ years of experience in C, C++, C#, Python, Java, or Ada 2+ years of experience developing, documenting, and maintaining architectures, algorithms, interfaces, and designs for software systems Preferred Qualifications (Desired Skills/Experience): Level 3: 5 or more years' related work experience or an equivalent combination of education and experience Level 4: 9 or more years' related work experience or an equivalent combination of education and experience Agile/SAFe development experience Experience with DevOps tools, such as GitLab (CI/CD), Git Bash, Gradle, Jira, Jenkins, and Artifactory Ability to work effectively in a team environment and communicate with stakeholders of different backgrounds and skill levels Experience developing embedded real-time software Experience working with Real-time Operating Systems (RTOS) Travel: less than 10%. Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate: $77,000.00 - $137,000.00 Summary pay range for Experienced: $98,000.00 - $173,000.00 Summary pay range for Senior: $124,000.00 - $220,000.00 Applications for this position will be accepted until Oct. 03, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation Relocation assistance is not a negotiable benefit for this position. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
