Job Description Senior Hardware Engineer Location - Tarrytown, NY. - Onsite Contract/Full time Must-Have Skills: - PCB Design / Analog /Mix Signal / Digital. 8-15 years of Hardware design experience. Analog, Digital & Mixed-Signal Design, Experience with signal integrity techniques and layout constraints. High-Speed PCB Design (Ethernet, USB, SPI, I2C, CAN) PCB Design, DFM, DFT, SI/PI Analysis Key Responsibilities Hands on PCB hardware design, new product development activities. Perform schematic reviews, component selection, PCB design reviews, and hardware validation. Design and develop electrical/electronic hardware and subsystem characterization/test equipment. Develop new concepts, including component selection and block diagrams . Create and maintain wiring diagrams, schematics, 2D/3D models and BOMs . Design/build electronics and manual or semi-automated test systems . Integrate electrical hardware with software/firmware and troubleshoot complex subsystem-level issues. Modify and review existing designs and execute engineering changes. Support PCBA, assemblies, prototypes, jigs and test fixtures . Perform design verification/validation and participate in reliability activities, including RCA/8D, FMEA, failure analysis and design reviews .
11/14/2026
Full time
Job Description Senior Hardware Engineer Location - Tarrytown, NY. - Onsite Contract/Full time Must-Have Skills: - PCB Design / Analog /Mix Signal / Digital. 8-15 years of Hardware design experience. Analog, Digital & Mixed-Signal Design, Experience with signal integrity techniques and layout constraints. High-Speed PCB Design (Ethernet, USB, SPI, I2C, CAN) PCB Design, DFM, DFT, SI/PI Analysis Key Responsibilities Hands on PCB hardware design, new product development activities. Perform schematic reviews, component selection, PCB design reviews, and hardware validation. Design and develop electrical/electronic hardware and subsystem characterization/test equipment. Develop new concepts, including component selection and block diagrams . Create and maintain wiring diagrams, schematics, 2D/3D models and BOMs . Design/build electronics and manual or semi-automated test systems . Integrate electrical hardware with software/firmware and troubleshoot complex subsystem-level issues. Modify and review existing designs and execute engineering changes. Support PCBA, assemblies, prototypes, jigs and test fixtures . Perform design verification/validation and participate in reliability activities, including RCA/8D, FMEA, failure analysis and design reviews .
Job Description Job Description Company Overview For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Great River Technology (GRT) located in Albuquerque, NM, a wholly owned subsidiary of Data Device Corporation, is a leader in high performance digital video and data development tools and services for the mil/aero industry. Since it's founding in 1996, it has developed partnerships with leading commercial and military companies worldwide. This position is 100% onsite at GRT in Albuquerque, NM. Due to U.S. export control requirements, this position is open only to candidates who qualify as a "U.S. Person." This generally includes U.S. citizens, U.S. nationals, lawful permanent residents/green card holders, and certain protected individuals, including refugees and asylees. Hardware Engineer (3 - 5 Years Experience) Role Overview We are seeking a motivated and skilled Hardware Engineer with 3 to 5 years of experience to join our engineering team. In this role, you will contribute to the design, development, and verification of high-performance digital hardware and FPGA architectures for advanced aerospace applications. You will work alongside senior engineers to implement ARINC 818 interfaces, high-speed digital designs, and mission-critical FPGA firmware. Key Responsibilities ARINC 818 & High-Speed Interfaces Assist in the design and implementation of ARINC 818 interfaces, including Fibre Channel protocols, video formats, timing, and link integrity. Support the integration and testing of ARINC 818 systems using laboratory test equipment and custom test setups. Help develop and execute test procedures for compliance, robustness, and performance validation. VHDL Development & FPGA Design Design, develop, and verify VHDL code for FPGAs (e.g., Xilinx) used in aerospace applications. Participate in FPGA constraint management, timing closure, synthesis, and place-and-route optimization. Implement digital signal processing (DSP) algorithms and video processing blocks within FPGA logic. Build and maintain testbenches and verification environments to ensure functional correctness. Hardware Development Life Cycle Contribute to the full lifecycle hardware development of airborne electronic systems, from schematic capture and detailed design through laboratory integration and verification. Perform basic circuit analysis, including power consumption, component stress, and worst-case checks under the guidance of senior engineers. Collaborate with Systems, Software, and Manufacturing teams to ensure seamless hardware-software integration. Perform product configuration management and product lifecycle management Support customer system-level integration and troubleshooting Certification & Compliance Assist in generating and reviewing airworthiness and compliance documentation, such as requirements specifications, design descriptions, and qualification test reports. Ensure all designs follow internal coding standards, aerospace guidelines, and industry best practices. Problem Solving & Continuous Learning Troubleshoot and resolve hardware and firmware issues using laboratory diagnostic tools (oscilloscopes, logic analyzers, etc.). Stay current with emerging trends in digital video, high-speed serial protocols, and FPGA technologies. Required Qualifications Education: Bachelor's degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, or a related technical field. Experience: 3 to 5 years of professional engineering experience in hardware design and development, preferably within the aerospace, defense, or high-reliability electronics industry. Technical Skills: Solid understanding of VHDL and FPGA development workflows (e.g., Xilinx Vivado). Familiarity with digital circuit design principles, high-speed digital interfaces, and basic signal integrity concepts. Experience using Electronic Design Automation (EDA) tools for simulation (e.g., ModelSim/QuestaSim) and schematic capture (e.g. Altium). Hands-on experience with laboratory test equipment such as oscilloscopes, logic analyzers, and multimeters. Soft Skills: Strong analytical, problem-solving, and communication skills, with a collaborative mindset and eagerness to learn from senior mentors. Preferred Qualifications Familiarity with ARINC 818 or other video standards (e.g. HDMI, NTSC, VGA). Experience with scripting languages (such as Python) for test automation and data analysis. Prior exposure to DO-254 and DO-160 certification processes.
11/14/2026
Full time
Job Description Job Description Company Overview For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. Great River Technology (GRT) located in Albuquerque, NM, a wholly owned subsidiary of Data Device Corporation, is a leader in high performance digital video and data development tools and services for the mil/aero industry. Since it's founding in 1996, it has developed partnerships with leading commercial and military companies worldwide. This position is 100% onsite at GRT in Albuquerque, NM. Due to U.S. export control requirements, this position is open only to candidates who qualify as a "U.S. Person." This generally includes U.S. citizens, U.S. nationals, lawful permanent residents/green card holders, and certain protected individuals, including refugees and asylees. Hardware Engineer (3 - 5 Years Experience) Role Overview We are seeking a motivated and skilled Hardware Engineer with 3 to 5 years of experience to join our engineering team. In this role, you will contribute to the design, development, and verification of high-performance digital hardware and FPGA architectures for advanced aerospace applications. You will work alongside senior engineers to implement ARINC 818 interfaces, high-speed digital designs, and mission-critical FPGA firmware. Key Responsibilities ARINC 818 & High-Speed Interfaces Assist in the design and implementation of ARINC 818 interfaces, including Fibre Channel protocols, video formats, timing, and link integrity. Support the integration and testing of ARINC 818 systems using laboratory test equipment and custom test setups. Help develop and execute test procedures for compliance, robustness, and performance validation. VHDL Development & FPGA Design Design, develop, and verify VHDL code for FPGAs (e.g., Xilinx) used in aerospace applications. Participate in FPGA constraint management, timing closure, synthesis, and place-and-route optimization. Implement digital signal processing (DSP) algorithms and video processing blocks within FPGA logic. Build and maintain testbenches and verification environments to ensure functional correctness. Hardware Development Life Cycle Contribute to the full lifecycle hardware development of airborne electronic systems, from schematic capture and detailed design through laboratory integration and verification. Perform basic circuit analysis, including power consumption, component stress, and worst-case checks under the guidance of senior engineers. Collaborate with Systems, Software, and Manufacturing teams to ensure seamless hardware-software integration. Perform product configuration management and product lifecycle management Support customer system-level integration and troubleshooting Certification & Compliance Assist in generating and reviewing airworthiness and compliance documentation, such as requirements specifications, design descriptions, and qualification test reports. Ensure all designs follow internal coding standards, aerospace guidelines, and industry best practices. Problem Solving & Continuous Learning Troubleshoot and resolve hardware and firmware issues using laboratory diagnostic tools (oscilloscopes, logic analyzers, etc.). Stay current with emerging trends in digital video, high-speed serial protocols, and FPGA technologies. Required Qualifications Education: Bachelor's degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, or a related technical field. Experience: 3 to 5 years of professional engineering experience in hardware design and development, preferably within the aerospace, defense, or high-reliability electronics industry. Technical Skills: Solid understanding of VHDL and FPGA development workflows (e.g., Xilinx Vivado). Familiarity with digital circuit design principles, high-speed digital interfaces, and basic signal integrity concepts. Experience using Electronic Design Automation (EDA) tools for simulation (e.g., ModelSim/QuestaSim) and schematic capture (e.g. Altium). Hands-on experience with laboratory test equipment such as oscilloscopes, logic analyzers, and multimeters. Soft Skills: Strong analytical, problem-solving, and communication skills, with a collaborative mindset and eagerness to learn from senior mentors. Preferred Qualifications Familiarity with ARINC 818 or other video standards (e.g. HDMI, NTSC, VGA). Experience with scripting languages (such as Python) for test automation and data analysis. Prior exposure to DO-254 and DO-160 certification processes.
Job Description Job Description Location: In-Field: Merced, CA Location Status: Work will be primarily performed at a designated field worksite location based out of a central Race Communications worksite. Frequent travel to and work from other Race offices or other off-site locations will be required. 100% Company-Paid Medical and Dental Benefits Free Fiber Internet Service Shift: 4 Hours Comp: $23 - $25 USD per hour Who We Are: We're more than a fiber internet provider, we're your neighbors, committed to connecting California communities since 1994. At Race, relationships matter as much as speed. We combine cutting-edge technology with a genuine, people-first approach that makes every interaction feel personal. Our team operates like family: collaborative, supportive, and dedicated to making a real difference. When you join Race, you're not just accepting a job, you're becoming part of a team that values integrity, celebrates wins together and believes that meaningful work happens when great people connect with great purpose. Position Impact: The Splice Technician 1 performs cable installation, construction, and repair across indoor and outdoor settings. Responsibilities include terminating fiber optic cables to expand or replace telecommunications networks while adhering to set standards, excelling in pinpointing and rectifying cable faults to uphold network integrity without causing signal disruptions. This role involves troubleshooting and maintenance to resolve signal issues. Proficient in driving a pick-up and trailer combination with safe maneuvering and backing skills, are adept at using bucket trucks, accessing manholes, hand holes, and employing ladders for diverse installation and construction tasks. With a proven history of efficiently managing multiple projects and meeting deadlines, this position entails frequent travel to various project locations. Requirements Qualifications and Experience: Eligibility for US Employment without sponsorship Minimum of 18 years of age High School Graduate or GED is required A valid California driver's license, subject to successful verification through a DMV check, is mandatory Familiarity with splicing fiber optic cablesincluding proficiency in joining optical fibers to ensure reliable signal transmission Ability to travel to multiple work sites, work overtime, weekends, holidays, or off hours Must be able to speak, read, write, and understand English as the primary language used in the workplace Experience in the telecom industry a plus Proficiency in Spanish Language desirable Skills: Proficient use of MS Office applications including Teams, Word, Excel, and PowerPoint; teleconferencing applications Functional use of common office equipment, computers, and office software Ability to distinguish colors and audible tones Essential Duties and Responsibilities: Fiber Optic Cable Splicing and Installation: Conducts maintenance and repair work on fiber optic lines, including examination, testing for damage, troubleshooting faults, and splicing new lines to replace damaged cables Reads and interprets fiber splicing diagrams, prints, specifications, work scopes, and fiber optic color code charts Performs outside plant fiber optic cable splicing, including ribbon fiber and loose tube fiber, installation of splice closures, unidirectional and bidirectional fiber testing, and termination of fiber optic cables Constructs proper splice cases, ensuring slack storage and securing Executes ring cuts, Installs and mounts FTPs (fiber termination points) and splicing cabinets Installs and connects wires and cables to designated terminals, ensuring proper connectivity within the network Attaches or detaches hardware components to diverse structures as required for network installation and maintenance Equipment Operations and Site Maintenance: Operates mechanized equipment such as a bucket truck, excavators, and trencher Climbs poles up to 40 feet and operates in bucket trucks with 32' plus ladders Manages deployment and removal of traffic control devices to ensure safety in work areas on streets or roadways Adheres to and operates within the weight capacity limits specified by manufacturers for equipment and machinery: Bucket Truck: 250 maximum load capacity Ladders: 250 maximum load capacity Operational Procedures and Quality Assurance: Reads and follows design engineer's instructions and specifications, maintaining project scope and adhering to safety procedures Prepares engineering field notes and splicing sheets; interprets buried underground and aerial telecom facilities in records, on maps, and in the field with clarity and detail Terminates fiber optic cables and ensures work is conducted safely and according to company safety practices Validates and conducts end-to-end testing for service provisioning on the cable network Installs and connects wires and cables to designated terminals, ensuring proper connectivity within the network Attaches or detaches hardware components to diverse structures as required for network installation and maintenance Locates and repairs cable faults to maintain the existing cable network without causing signal failure interruptions Confirms accurate cable terminations on cross-connects, patch panels, and hubs Validates and conducts end-to-end testing for service provisioning on the cable network Project Coordination and Documentation: Coordinates daily crew activities and work schedule, maintaining a safe and quality work site location, splicing rig, and associated equipment and tools Validates and tests end-to-end service provisioning for the cable network Connects wires and cables to terminals; attaches/detaches various kinds of hardware to wires, cables, buildings, or poles Maintains project tracing information such as production sheets, time sheets, and customer-required paperwork Completes reports related to project status, progress, or other work details using computer software Takes site photos or photos of work performed using digital cameras as needed Prepares engineering field notes and splicing sheets, interprets telecom facilities on records and maps with clarity Maintains project tracing information, production sheets, time sheets, and completes reports related to project status and progress using computer software Safety Awareness and Compliance: Observes hazards and reports any concerns or accidents to a supervisor or safety professional; participates in the investigation process as needed Understands, completes, and signs off all pre-job safety planning tools at the start and end of the shift; completes all required safety-related paperwork Understands and responds appropriately to all safety hazards and warning devices (e.g., back-up alarms, smell of smoke, fumes, odors, different colored warning tags, warning sirens) Vehicle Maintenance and Travel: Maintains vehicle/equipment pre-op/post-op to be prepared to perform required duties Maintains a clean driving record as defined by the current fleet insurance underwriter Spends a significant portion of the workday traveling in a vehicle visiting various locations and spending time both indoors and outdoors including businesses and/or residents depending on the nature of the job Overtime, nights, and weekends may be required Benefits Why Join Our Team: Join a tight-knit crew-no faceless corporation vibes here Growth potential: promotions and new challenges are part of our DNA Competitive base salary Comprehensive Benefits Package: 100% company-paid medical and dental insurance (starting the 1st of the month following your start date), PTO (vacation, sick), 11 paid holidays, paid birthdays, 401k matching (4%) Free fiber internet service for all employees living in our service area A culture built on integrity, mutual respect, and a shared purpose Call to Action: Let's chat. If you're ready to move forward, click "Apply" below, our team can't wait to meet you.
11/12/2026
Full time
Job Description Job Description Location: In-Field: Merced, CA Location Status: Work will be primarily performed at a designated field worksite location based out of a central Race Communications worksite. Frequent travel to and work from other Race offices or other off-site locations will be required. 100% Company-Paid Medical and Dental Benefits Free Fiber Internet Service Shift: 4 Hours Comp: $23 - $25 USD per hour Who We Are: We're more than a fiber internet provider, we're your neighbors, committed to connecting California communities since 1994. At Race, relationships matter as much as speed. We combine cutting-edge technology with a genuine, people-first approach that makes every interaction feel personal. Our team operates like family: collaborative, supportive, and dedicated to making a real difference. When you join Race, you're not just accepting a job, you're becoming part of a team that values integrity, celebrates wins together and believes that meaningful work happens when great people connect with great purpose. Position Impact: The Splice Technician 1 performs cable installation, construction, and repair across indoor and outdoor settings. Responsibilities include terminating fiber optic cables to expand or replace telecommunications networks while adhering to set standards, excelling in pinpointing and rectifying cable faults to uphold network integrity without causing signal disruptions. This role involves troubleshooting and maintenance to resolve signal issues. Proficient in driving a pick-up and trailer combination with safe maneuvering and backing skills, are adept at using bucket trucks, accessing manholes, hand holes, and employing ladders for diverse installation and construction tasks. With a proven history of efficiently managing multiple projects and meeting deadlines, this position entails frequent travel to various project locations. Requirements Qualifications and Experience: Eligibility for US Employment without sponsorship Minimum of 18 years of age High School Graduate or GED is required A valid California driver's license, subject to successful verification through a DMV check, is mandatory Familiarity with splicing fiber optic cablesincluding proficiency in joining optical fibers to ensure reliable signal transmission Ability to travel to multiple work sites, work overtime, weekends, holidays, or off hours Must be able to speak, read, write, and understand English as the primary language used in the workplace Experience in the telecom industry a plus Proficiency in Spanish Language desirable Skills: Proficient use of MS Office applications including Teams, Word, Excel, and PowerPoint; teleconferencing applications Functional use of common office equipment, computers, and office software Ability to distinguish colors and audible tones Essential Duties and Responsibilities: Fiber Optic Cable Splicing and Installation: Conducts maintenance and repair work on fiber optic lines, including examination, testing for damage, troubleshooting faults, and splicing new lines to replace damaged cables Reads and interprets fiber splicing diagrams, prints, specifications, work scopes, and fiber optic color code charts Performs outside plant fiber optic cable splicing, including ribbon fiber and loose tube fiber, installation of splice closures, unidirectional and bidirectional fiber testing, and termination of fiber optic cables Constructs proper splice cases, ensuring slack storage and securing Executes ring cuts, Installs and mounts FTPs (fiber termination points) and splicing cabinets Installs and connects wires and cables to designated terminals, ensuring proper connectivity within the network Attaches or detaches hardware components to diverse structures as required for network installation and maintenance Equipment Operations and Site Maintenance: Operates mechanized equipment such as a bucket truck, excavators, and trencher Climbs poles up to 40 feet and operates in bucket trucks with 32' plus ladders Manages deployment and removal of traffic control devices to ensure safety in work areas on streets or roadways Adheres to and operates within the weight capacity limits specified by manufacturers for equipment and machinery: Bucket Truck: 250 maximum load capacity Ladders: 250 maximum load capacity Operational Procedures and Quality Assurance: Reads and follows design engineer's instructions and specifications, maintaining project scope and adhering to safety procedures Prepares engineering field notes and splicing sheets; interprets buried underground and aerial telecom facilities in records, on maps, and in the field with clarity and detail Terminates fiber optic cables and ensures work is conducted safely and according to company safety practices Validates and conducts end-to-end testing for service provisioning on the cable network Installs and connects wires and cables to designated terminals, ensuring proper connectivity within the network Attaches or detaches hardware components to diverse structures as required for network installation and maintenance Locates and repairs cable faults to maintain the existing cable network without causing signal failure interruptions Confirms accurate cable terminations on cross-connects, patch panels, and hubs Validates and conducts end-to-end testing for service provisioning on the cable network Project Coordination and Documentation: Coordinates daily crew activities and work schedule, maintaining a safe and quality work site location, splicing rig, and associated equipment and tools Validates and tests end-to-end service provisioning for the cable network Connects wires and cables to terminals; attaches/detaches various kinds of hardware to wires, cables, buildings, or poles Maintains project tracing information such as production sheets, time sheets, and customer-required paperwork Completes reports related to project status, progress, or other work details using computer software Takes site photos or photos of work performed using digital cameras as needed Prepares engineering field notes and splicing sheets, interprets telecom facilities on records and maps with clarity Maintains project tracing information, production sheets, time sheets, and completes reports related to project status and progress using computer software Safety Awareness and Compliance: Observes hazards and reports any concerns or accidents to a supervisor or safety professional; participates in the investigation process as needed Understands, completes, and signs off all pre-job safety planning tools at the start and end of the shift; completes all required safety-related paperwork Understands and responds appropriately to all safety hazards and warning devices (e.g., back-up alarms, smell of smoke, fumes, odors, different colored warning tags, warning sirens) Vehicle Maintenance and Travel: Maintains vehicle/equipment pre-op/post-op to be prepared to perform required duties Maintains a clean driving record as defined by the current fleet insurance underwriter Spends a significant portion of the workday traveling in a vehicle visiting various locations and spending time both indoors and outdoors including businesses and/or residents depending on the nature of the job Overtime, nights, and weekends may be required Benefits Why Join Our Team: Join a tight-knit crew-no faceless corporation vibes here Growth potential: promotions and new challenges are part of our DNA Competitive base salary Comprehensive Benefits Package: 100% company-paid medical and dental insurance (starting the 1st of the month following your start date), PTO (vacation, sick), 11 paid holidays, paid birthdays, 401k matching (4%) Free fiber internet service for all employees living in our service area A culture built on integrity, mutual respect, and a shared purpose Call to Action: Let's chat. If you're ready to move forward, click "Apply" below, our team can't wait to meet you.
Leidos is seeking an Electronic Warfare Integrator to design, integrate, and optimize EW systems that support national security missions. In this role, you will translate mission and threat requirements into technical solutions, integrate RF sensors and jammers with C4ISR and IT networks, and support lab and field testing. You will analyze signals and waveforms, troubleshoot system issues, and ensure interoperability with existing platforms. The role works closely with engineers, cyber, and operations teams in a highly collaborative, mission-driven culture that values innovation, integrity, continuous learning, and real-world impact. Responsibilities Design and integrate electronic warfare solutions into mission systems and networks Translate mission, threat, and operational requirements into technical architectures Integrate RF sensors, jammers, and EW payloads with C4 ISR and IT infrastructures Support lab, range, and field testing, including test planning and data analysis Analyze signals, waveforms, and electromagnetic environments to optimize performance Troubleshoot and resolve EW system, interoperability, and network issues Collaborate with engineers, cyber specialists, and operators to refine capabilities Develop system documentation, integration plans, and configuration baselines Support cybersecurity, accreditation, and compliance for integrated EW systems Contribute to continuous improvement, innovation, and knowledge sharing within the team Required Skills Electronic warfare systems integration RF engineering and propagation Signal and waveform analysis C4 ISR systems and architectures Systems engineering and requirements analysis Networked systems and IP-based communications Linux/Windows system administration for labs Test planning, execution, and data analysis Troubleshooting complex hardware/software systems Technical documentation and configuration management
11/08/2026
Full time
Leidos is seeking an Electronic Warfare Integrator to design, integrate, and optimize EW systems that support national security missions. In this role, you will translate mission and threat requirements into technical solutions, integrate RF sensors and jammers with C4ISR and IT networks, and support lab and field testing. You will analyze signals and waveforms, troubleshoot system issues, and ensure interoperability with existing platforms. The role works closely with engineers, cyber, and operations teams in a highly collaborative, mission-driven culture that values innovation, integrity, continuous learning, and real-world impact. Responsibilities Design and integrate electronic warfare solutions into mission systems and networks Translate mission, threat, and operational requirements into technical architectures Integrate RF sensors, jammers, and EW payloads with C4 ISR and IT infrastructures Support lab, range, and field testing, including test planning and data analysis Analyze signals, waveforms, and electromagnetic environments to optimize performance Troubleshoot and resolve EW system, interoperability, and network issues Collaborate with engineers, cyber specialists, and operators to refine capabilities Develop system documentation, integration plans, and configuration baselines Support cybersecurity, accreditation, and compliance for integrated EW systems Contribute to continuous improvement, innovation, and knowledge sharing within the team Required Skills Electronic warfare systems integration RF engineering and propagation Signal and waveform analysis C4 ISR systems and architectures Systems engineering and requirements analysis Networked systems and IP-based communications Linux/Windows system administration for labs Test planning, execution, and data analysis Troubleshooting complex hardware/software systems Technical documentation and configuration management
As a Field Applications Engineer at Arrow Electronics, you'll bridge advanced electronic technologies and customer needs across the wholesale trade channel. You will support industrial and commercial customers in designing, selecting, and integrating electronic components and systems from Arrow's global supplier network. Responsibilities include providing in-depth technical guidance, conducting design reviews, resolving complex application issues, and collaborating closely with sales teams. In Arrow's performance-driven, innovative culture, you'll influence next-generation solutions while growing your expertise in a diverse, global environment. Responsibilities Serve as technical liaison between customers, Arrow sales, and supplier engineering teams Guide customers in selecting and integrating electronic components and systems Conduct design reviews and provide recommendations to optimize performance, cost, and reliability Diagnose and resolve complex hardware and application issues at customer sites and remotely Develop and deliver technical presentations, demos, and design-in support Collaborate with sales to identify new design opportunities and influence bill-of-material decisions Stay current on supplier roadmaps, emerging technologies, and industry trends Document application notes, reference designs, and best practices for customers and internal teams Required Skills Electronics circuit design Embedded systems and microcontrollers Reading and interpreting schematics Signal integrity and high-speed design basics Hands-on lab skills (oscilloscope, logic analyzer, etc.) Technical sales support / pre-sales engineering Customer requirements analysis Solution architecture for electronic systems Technical documentation and presentations Collaboration with sales, suppliers, and design teams
10/02/2026
Full time
As a Field Applications Engineer at Arrow Electronics, you'll bridge advanced electronic technologies and customer needs across the wholesale trade channel. You will support industrial and commercial customers in designing, selecting, and integrating electronic components and systems from Arrow's global supplier network. Responsibilities include providing in-depth technical guidance, conducting design reviews, resolving complex application issues, and collaborating closely with sales teams. In Arrow's performance-driven, innovative culture, you'll influence next-generation solutions while growing your expertise in a diverse, global environment. Responsibilities Serve as technical liaison between customers, Arrow sales, and supplier engineering teams Guide customers in selecting and integrating electronic components and systems Conduct design reviews and provide recommendations to optimize performance, cost, and reliability Diagnose and resolve complex hardware and application issues at customer sites and remotely Develop and deliver technical presentations, demos, and design-in support Collaborate with sales to identify new design opportunities and influence bill-of-material decisions Stay current on supplier roadmaps, emerging technologies, and industry trends Document application notes, reference designs, and best practices for customers and internal teams Required Skills Electronics circuit design Embedded systems and microcontrollers Reading and interpreting schematics Signal integrity and high-speed design basics Hands-on lab skills (oscilloscope, logic analyzer, etc.) Technical sales support / pre-sales engineering Customer requirements analysis Solution architecture for electronic systems Technical documentation and presentations Collaboration with sales, suppliers, and design teams
As a Field Applications Engineer at Arrow Electronics, you'll bridge advanced electronic technologies and customer needs across the wholesale trade channel. You will support industrial and commercial customers in designing, selecting, and integrating electronic components and systems from Arrow's global supplier network. Responsibilities include providing in-depth technical guidance, conducting design reviews, resolving complex application issues, and collaborating closely with sales teams. In Arrow's performance-driven, innovative culture, you'll influence next-generation solutions while growing your expertise in a diverse, global environment. Responsibilities Serve as technical liaison between customers, Arrow sales, and supplier engineering teams Guide customers in selecting and integrating electronic components and systems Conduct design reviews and provide recommendations to optimize performance, cost, and reliability Diagnose and resolve complex hardware and application issues at customer sites and remotely Develop and deliver technical presentations, demos, and design-in support Collaborate with sales to identify new design opportunities and influence bill-of-material decisions Stay current on supplier roadmaps, emerging technologies, and industry trends Document application notes, reference designs, and best practices for customers and internal teams Required Skills Electronics circuit design Embedded systems and microcontrollers Reading and interpreting schematics Signal integrity and high-speed design basics Hands-on lab skills (oscilloscope, logic analyzer, etc.) Technical sales support / pre-sales engineering Customer requirements analysis Solution architecture for electronic systems Technical documentation and presentations Collaboration with sales, suppliers, and design teams
10/02/2026
Full time
As a Field Applications Engineer at Arrow Electronics, you'll bridge advanced electronic technologies and customer needs across the wholesale trade channel. You will support industrial and commercial customers in designing, selecting, and integrating electronic components and systems from Arrow's global supplier network. Responsibilities include providing in-depth technical guidance, conducting design reviews, resolving complex application issues, and collaborating closely with sales teams. In Arrow's performance-driven, innovative culture, you'll influence next-generation solutions while growing your expertise in a diverse, global environment. Responsibilities Serve as technical liaison between customers, Arrow sales, and supplier engineering teams Guide customers in selecting and integrating electronic components and systems Conduct design reviews and provide recommendations to optimize performance, cost, and reliability Diagnose and resolve complex hardware and application issues at customer sites and remotely Develop and deliver technical presentations, demos, and design-in support Collaborate with sales to identify new design opportunities and influence bill-of-material decisions Stay current on supplier roadmaps, emerging technologies, and industry trends Document application notes, reference designs, and best practices for customers and internal teams Required Skills Electronics circuit design Embedded systems and microcontrollers Reading and interpreting schematics Signal integrity and high-speed design basics Hands-on lab skills (oscilloscope, logic analyzer, etc.) Technical sales support / pre-sales engineering Customer requirements analysis Solution architecture for electronic systems Technical documentation and presentations Collaboration with sales, suppliers, and design teams
Job Description Job Description Advance your career with us and be part of a mission-driven team delivering critical telecommunications and recovery solutions. At InfraServices, we're more than a services provider - we're innovators, problem-solvers, and collaborators. Our culture is built on a foundation of safety first, guided by a customer-focused philosophy, and defined by excellence and integrity. Here, every voice is heard, fresh ideas are celebrated, and exceptional talent is valued. We're committed to building an employee experience rooted in trust, respect, continuous learning, and growth opportunities. Whether you're building cutting-edge infrastructure, supporting field operations, or driving business development, you'll play a vital role in upholding our core values and delivering on our business objectives. Job Summary: The Data Center Technician II is responsible for independently performing advanced installation and deployment activities for data center infrastructure projects in colocation, enterprise, regional, and hyperscale environments. This role focuses on full row installations, interpretation of engineered drawings, and ownership of installation quality and QA processes. The Technician II serves as a technical resource on-site and provides guidance to less experienced technicians while supporting new build, expansion, and MACD projects. Essential Duties and Responsibilities: • Independently install and align server cabinets, network racks, ladder rack, containment systems, and supporting infrastructure according to engineered drawings and floor plans • Perform full row installations and validate layouts using field measurements and project documentation • Install overhead ladder rack, basket tray, conveyance systems, and fiber trough infrastructure • Pull, route, terminate, and dress copper, coax, and fiber optic cabling according to customer and industry standards • Install patch panels, splice trays, enclosures, rPDUs, tap boxes, cable whips, FAP panels, and DC loop systems • Rack and secure servers, switches, storage arrays, optical transport equipment, and related hardware • Perform fiber cleaning, inspection, continuity testing, and basic troubleshooting • Maintain ownership of QA/QC processes including punch lists, installation verification, and closeout activities • Interpret engineered drawings, MOPs, and scopes of work to ensure proper installation execution • Create and maintain accurate labeling, redlines, and as-built documentation • Support and mentor Technician I team members • Maintain clean and organized work areas, including proper housekeeping of tools, materials, and installation debris • Follow all Company safety policies, customer site requirements, and established safe work practices at all times • Accurately complete and submit timecards and other required administrative records in a timely manner • Travel regularly to job sites, which may include overnight stays • Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: • Two to five years of experience in data center installation, structured cablings, or telecommunications deployment • Experience performing full row installations and installation QA/QC activities required • Experience in colocation or hyperscale environments preferred • Must have or obtain and maintain OSHA 10 Construction Training Card • Must have or obtain and maintain First Aid and CPR Certification Technical Skills: • Computer and Microsoft Office proficiency • Strong understanding of structured cabling systems and installation standards • Proficiency with copper and fiber optic infrastructure including MPO, LC, SM/MM fiber, and Cat6/6A systems • Ability to interpret engineered drawings, floor plans, and installation documentation • Strong knowledge of cable management, grounding/bonding, bend radius, and labeling standards • Experience with fiber cleaning, inspection, and continuity testing • Familiarity with switches, network equipment, and optical transport systems preferred • Exposure to busway, RPPs, PDUs, and rPDUs preferred Soft Skills: • Consistently demonstrates reliability, punctuality, and a strong commitment to completing work safely, efficiently, and to a high standard of quality • Strong organizational and problem-solving skills • Ability to work independently with minimal supervision • Strong communication and teamwork abilities • Attention to detail and accountability for installation quality • Ability to mentor less experienced technicians and support team development • Ability to prioritize work in fast-paced deployment schedules Physical Requirements: • Must be able to pass pre-employment screening that includes background and drug testing • Must have a valid driver's license and a driving record that meets Company requirements • Ability to lift and carry up to 50 pounds regularly • Ability to stand, bend, climb, and work overhead for extended periods • Ability to safely use ladders, lifts, and power tools • Ability to work in active construction and live data center environments • Ability to wear the required personal protective equipment (PPE) • Ability to work long and unpredictable hours and flexible schedules, including nights and weekends as required • Ability to travel regionally and nationally up to 75% of the time Employee Benefits: At InfraServices, taking care of our people is a top priority. That's why we've built a strong benefits program designed to support you and your family, giving you the security you deserve. We know benefits are an essential part of your overall compensation, and we're committed to offering a competitive package that reflects the value you bring. Below is a quick look at what we offer. Medical, Dental, & Vision Benefits: We've got your health covered. Short- & Long-Term Disability Benefits: Protection when you need it most. Company Paid Basic Life Insurance: Additional voluntary benefits are available. Voluntary Accident, Critical Illness, and Hospital Indemnity Plans: Added security for you and your loved ones. Flexible Spending Accounts: Manage your finances with flexibility. Employee Assistance Program (EAP): Support when life throws challenges your way. Wellness Program: Resources and programs designed to support your overall health and well-being. 401(K) with Company match: Building your financial future with us. Paid Time Off, Paid Sick Time, & Company Holidays: Achieving that work-life balance. Paid Parental & Paid Maternity Leave: Supporting your family is our priority. Military Differential Pay: Income protection for employees serving in the military. Employee Referral Program: Share the opportunities and reap the rewards. Company Discount Program: Enjoy savings on everyday expenses. Legal Assistance: Affordable legal support for employees. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
09/30/2026
Full time
Job Description Job Description Advance your career with us and be part of a mission-driven team delivering critical telecommunications and recovery solutions. At InfraServices, we're more than a services provider - we're innovators, problem-solvers, and collaborators. Our culture is built on a foundation of safety first, guided by a customer-focused philosophy, and defined by excellence and integrity. Here, every voice is heard, fresh ideas are celebrated, and exceptional talent is valued. We're committed to building an employee experience rooted in trust, respect, continuous learning, and growth opportunities. Whether you're building cutting-edge infrastructure, supporting field operations, or driving business development, you'll play a vital role in upholding our core values and delivering on our business objectives. Job Summary: The Data Center Technician II is responsible for independently performing advanced installation and deployment activities for data center infrastructure projects in colocation, enterprise, regional, and hyperscale environments. This role focuses on full row installations, interpretation of engineered drawings, and ownership of installation quality and QA processes. The Technician II serves as a technical resource on-site and provides guidance to less experienced technicians while supporting new build, expansion, and MACD projects. Essential Duties and Responsibilities: • Independently install and align server cabinets, network racks, ladder rack, containment systems, and supporting infrastructure according to engineered drawings and floor plans • Perform full row installations and validate layouts using field measurements and project documentation • Install overhead ladder rack, basket tray, conveyance systems, and fiber trough infrastructure • Pull, route, terminate, and dress copper, coax, and fiber optic cabling according to customer and industry standards • Install patch panels, splice trays, enclosures, rPDUs, tap boxes, cable whips, FAP panels, and DC loop systems • Rack and secure servers, switches, storage arrays, optical transport equipment, and related hardware • Perform fiber cleaning, inspection, continuity testing, and basic troubleshooting • Maintain ownership of QA/QC processes including punch lists, installation verification, and closeout activities • Interpret engineered drawings, MOPs, and scopes of work to ensure proper installation execution • Create and maintain accurate labeling, redlines, and as-built documentation • Support and mentor Technician I team members • Maintain clean and organized work areas, including proper housekeeping of tools, materials, and installation debris • Follow all Company safety policies, customer site requirements, and established safe work practices at all times • Accurately complete and submit timecards and other required administrative records in a timely manner • Travel regularly to job sites, which may include overnight stays • Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: • Two to five years of experience in data center installation, structured cablings, or telecommunications deployment • Experience performing full row installations and installation QA/QC activities required • Experience in colocation or hyperscale environments preferred • Must have or obtain and maintain OSHA 10 Construction Training Card • Must have or obtain and maintain First Aid and CPR Certification Technical Skills: • Computer and Microsoft Office proficiency • Strong understanding of structured cabling systems and installation standards • Proficiency with copper and fiber optic infrastructure including MPO, LC, SM/MM fiber, and Cat6/6A systems • Ability to interpret engineered drawings, floor plans, and installation documentation • Strong knowledge of cable management, grounding/bonding, bend radius, and labeling standards • Experience with fiber cleaning, inspection, and continuity testing • Familiarity with switches, network equipment, and optical transport systems preferred • Exposure to busway, RPPs, PDUs, and rPDUs preferred Soft Skills: • Consistently demonstrates reliability, punctuality, and a strong commitment to completing work safely, efficiently, and to a high standard of quality • Strong organizational and problem-solving skills • Ability to work independently with minimal supervision • Strong communication and teamwork abilities • Attention to detail and accountability for installation quality • Ability to mentor less experienced technicians and support team development • Ability to prioritize work in fast-paced deployment schedules Physical Requirements: • Must be able to pass pre-employment screening that includes background and drug testing • Must have a valid driver's license and a driving record that meets Company requirements • Ability to lift and carry up to 50 pounds regularly • Ability to stand, bend, climb, and work overhead for extended periods • Ability to safely use ladders, lifts, and power tools • Ability to work in active construction and live data center environments • Ability to wear the required personal protective equipment (PPE) • Ability to work long and unpredictable hours and flexible schedules, including nights and weekends as required • Ability to travel regionally and nationally up to 75% of the time Employee Benefits: At InfraServices, taking care of our people is a top priority. That's why we've built a strong benefits program designed to support you and your family, giving you the security you deserve. We know benefits are an essential part of your overall compensation, and we're committed to offering a competitive package that reflects the value you bring. Below is a quick look at what we offer. Medical, Dental, & Vision Benefits: We've got your health covered. Short- & Long-Term Disability Benefits: Protection when you need it most. Company Paid Basic Life Insurance: Additional voluntary benefits are available. Voluntary Accident, Critical Illness, and Hospital Indemnity Plans: Added security for you and your loved ones. Flexible Spending Accounts: Manage your finances with flexibility. Employee Assistance Program (EAP): Support when life throws challenges your way. Wellness Program: Resources and programs designed to support your overall health and well-being. 401(K) with Company match: Building your financial future with us. Paid Time Off, Paid Sick Time, & Company Holidays: Achieving that work-life balance. Paid Parental & Paid Maternity Leave: Supporting your family is our priority. Military Differential Pay: Income protection for employees serving in the military. Employee Referral Program: Share the opportunities and reap the rewards. Company Discount Program: Enjoy savings on everyday expenses. Legal Assistance: Affordable legal support for employees. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Job Description Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Power Integrity Engineer Location: Valley Green, PA Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We are currently seeking a Power Integrity Engineer to join our Cable Backplane Systems team. The position will be located in Valley Green, PA. We are seeking a skilled and detail-oriented Power Integrity (PI) Engineer to join our high-performance engineering team. In this role, you will be responsible for analyzing, simulating, and optimizing power delivery networks (PDN) for next-generation high-speed systems. The concentration will be specifically on interconnects. You will work closely with signal integrity, PCB design, and hardware teams to ensure robust power delivery that meets primarily impedance requirements with the possible addition of requirements for noise and ripple. Additional responsibilities could include the evaluation of shielding for EMI/EMC remediation. This is a hands-on engineering role that requires strong technical skills, creative problem-solving, and the ability to collaborate with cross-functional teams in a fast-paced environment. RESPONSIBILITIES: Perform power integrity simulations (AC impedance, DC IR drop, and transient analysis) to ensure PDN performance. Design and optimize decoupling strategies, capacitor selection, and placement for complex boards and systems. Interact with customers to determine their power interconnect needs. Perform EMI/EMC risk assessments related to power distribution. Collaborate with SI engineers to co-optimize power and signal integrity. Develop PDN models and validate through lab measurements (VNA impedance sweeps, oscilloscope ripple measurements). Work with PCB designers on layer stack-up, plane assignments, and power routing. Assist in root-cause analysis and debugging of customer power-related issues. Document best practices and contribute to design guidelines for power delivery networks. QUALIFICATIONS: Required: Bachelor's degree in Electrical Engineering or related field (Master's preferred) 3+ years of experience in power integrity, signal integrity, or hardware design Hands-on experience with PDN simulation tools (examples: Keysight PIPro, ANSYS Q3D, HFSS, and SIwave, Cadence Sigrity PowerSI, etc.) Experience with SPICE simulation and transient load modeling Strong understanding of PDN impedance, VRM behavior, and decoupling network design Proficiency in PCB stack-up design, power plane resonance control, and capacitor optimization Excellent analytical, communication, and documentation skills Preferred: Familiarity with high-speed digital systems (SerDes, DDR, PCIe) Knowledge of EMI/EMC compliance testing and mitigation techniques Background in scripting or automation (MATLAB, Python) for data analysis Experience with lab instrumentation: VNAs, oscilloscopes, spectrum analyzers Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin. For additional company information please visit our website at
09/28/2026
Full time
Job Description Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Power Integrity Engineer Location: Valley Green, PA Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We are currently seeking a Power Integrity Engineer to join our Cable Backplane Systems team. The position will be located in Valley Green, PA. We are seeking a skilled and detail-oriented Power Integrity (PI) Engineer to join our high-performance engineering team. In this role, you will be responsible for analyzing, simulating, and optimizing power delivery networks (PDN) for next-generation high-speed systems. The concentration will be specifically on interconnects. You will work closely with signal integrity, PCB design, and hardware teams to ensure robust power delivery that meets primarily impedance requirements with the possible addition of requirements for noise and ripple. Additional responsibilities could include the evaluation of shielding for EMI/EMC remediation. This is a hands-on engineering role that requires strong technical skills, creative problem-solving, and the ability to collaborate with cross-functional teams in a fast-paced environment. RESPONSIBILITIES: Perform power integrity simulations (AC impedance, DC IR drop, and transient analysis) to ensure PDN performance. Design and optimize decoupling strategies, capacitor selection, and placement for complex boards and systems. Interact with customers to determine their power interconnect needs. Perform EMI/EMC risk assessments related to power distribution. Collaborate with SI engineers to co-optimize power and signal integrity. Develop PDN models and validate through lab measurements (VNA impedance sweeps, oscilloscope ripple measurements). Work with PCB designers on layer stack-up, plane assignments, and power routing. Assist in root-cause analysis and debugging of customer power-related issues. Document best practices and contribute to design guidelines for power delivery networks. QUALIFICATIONS: Required: Bachelor's degree in Electrical Engineering or related field (Master's preferred) 3+ years of experience in power integrity, signal integrity, or hardware design Hands-on experience with PDN simulation tools (examples: Keysight PIPro, ANSYS Q3D, HFSS, and SIwave, Cadence Sigrity PowerSI, etc.) Experience with SPICE simulation and transient load modeling Strong understanding of PDN impedance, VRM behavior, and decoupling network design Proficiency in PCB stack-up design, power plane resonance control, and capacitor optimization Excellent analytical, communication, and documentation skills Preferred: Familiarity with high-speed digital systems (SerDes, DDR, PCIe) Knowledge of EMI/EMC compliance testing and mitigation techniques Background in scripting or automation (MATLAB, Python) for data analysis Experience with lab instrumentation: VNAs, oscilloscopes, spectrum analyzers Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin. For additional company information please visit our website at
Job Description Job Description Principal Test Engineer JOB DESCRIPTION Job Title: Principal Test Engineer Job Code: 12663 Reports To: Manager/Director of Engineering Department Name: 40 - Test Engineering Location: Wichita POSITION SUMMARY (Briefly describe the purpose of the position ) Plan, design and evaluate test development projects in collaboration with internal and external customers to ensure that all specifications meet customer expectations and organizational requirements. Must have experience with memory testing. Position is located in Wichita, KS. Please do not apply if you are not interested in relocation. ITAR Compliance is required. You must be a US Citizens or Green Card holder to be considered for position. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE (List in order of importance ) Develop semiconductor component-level test plans that determine methods, procedures, and conditions to ensure coverage of device specifications that meet customer application requirements. Develop Automated Test Equipment (ATE) test program hardware and software to test semiconductor devices per customer approved test plans. Configure and/or program bench level lab equipment as needed to meet test requirements. Work with the Sales Team to accurately cost quote device test development engineering hours, test platform hours, and the test hardware required to meet customer approved test plans. Work with the Operations Team to determine engineering feasibility and cost effectiveness for production-level test programs. Resolve technical problems using device/test debugging technics, and collection of test characterization data to reach engineering conclusions for driving corrective actions. Flexibility to perform other duties as assigned. JOB REQUIREMENTS INCLUDE (List as required or preferred ) Education: Bachelor's degree in Electrical Engineering preferred; however, a combination of education and experience wherein the skills and abilities to perform the responsibilities and functions have been adequately demonstrated is acceptable. Experience: 7-10 years of the following experience is required: Developing IC test solutions on automated test equipment such as Teradyne, Advantest, LTX-Credence, etc. platforms. Test program development of digital, analog or mixed signal integrated circuits. Utilize knowledge of programming techniques, electronic, test equipment, and test specifications to develop test programs to a set schedule. Read, analyze, and interpret semiconductor datasheets and test specifications to estimate test program development time and material costs. Program manage individual test developments from initial stage to completion while accurately reporting status to all stakeholders. Maintain a high level of attention to detail and accuracy to ensure data integrity. Utilize effective communication skills with internal and external customers to achieve required results. Effectively and efficiently utilize Microsoft Office and other computer products and programs. Knowledge/Skills/Overall Competences: Job Knowledge: Possesses and applies a comprehensive knowledge of a particular field of specialization to the completion of significant assignments. Comprehensive knowledge of products and product direction for all products. Level at which career may plateau. Technical Skill Having wide-ranging experience, uses professional concepts and company objectives to resolve significantly complex issues in creative and effective ways. Applies extensive expertise as a specialist to accomplish goals. Leads product design projects. An emerging authority in a particular field. Design/Planning: Task Definition, Design, Project Planning Understands company technical goals and direction and influences how it applies to work in the function. Accurately estimates time and resources necessary for projects. Coaches and leads others in the use of process and planning tools. Job Complexity Works on significant and complex issues where analysis of situations or data requires an in-depth evaluation of variable factors. Exercises independent judgment in selecting methods, techniques and evaluation criteria for obtaining results. Complexity of work requires ingenuity and creativity to solve problems and accomplish goals. Creates formal networks involving coordination among internal groups. Problem Resolution Identifies and resolves problems and issues outside of the assigned area. Develops solutions to complex problems that require the regular use of ingenuity and creativity. Serves as a mentor or consultant to others in solving problems or thinking through issues. Communication: Verbal/Written Consistently communicates effectively across organizational boundaries and externally to customers. Involved in cross-department projects in defining or solving problems. Interacts to share knowledge and solutions and to lead/serve on task teams or committees. Teamwork Leads others in gaining a common understanding through discussion. Clarifies team goals, expectations, ground rules and responsibilities. Makes progress even when ambiguity has not been resolved. Personal Leadership: Influencing, Impact, Affecting Change, Coaching Establishes product direction in related areas. Makes decisions that affect income, expenses, operations and customer relations that in turn directly influence activities and objectives of cross functional work groups or function. Sound decisions or recommendations result in successfully achieving critical company objectives and affect the image of the organization's technological capability. Effective in gaining buy-in. Coach/Develop others in many related areas. Supervision Required Duties are performed under minimal supervision with assignments given in terms of objectives and results expected. Operates with substantial latitude for un-reviewed actions or decisions. Determines methods and procedures on new assignments and may lead activities of other personal
09/28/2026
Full time
Job Description Job Description Principal Test Engineer JOB DESCRIPTION Job Title: Principal Test Engineer Job Code: 12663 Reports To: Manager/Director of Engineering Department Name: 40 - Test Engineering Location: Wichita POSITION SUMMARY (Briefly describe the purpose of the position ) Plan, design and evaluate test development projects in collaboration with internal and external customers to ensure that all specifications meet customer expectations and organizational requirements. Must have experience with memory testing. Position is located in Wichita, KS. Please do not apply if you are not interested in relocation. ITAR Compliance is required. You must be a US Citizens or Green Card holder to be considered for position. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE (List in order of importance ) Develop semiconductor component-level test plans that determine methods, procedures, and conditions to ensure coverage of device specifications that meet customer application requirements. Develop Automated Test Equipment (ATE) test program hardware and software to test semiconductor devices per customer approved test plans. Configure and/or program bench level lab equipment as needed to meet test requirements. Work with the Sales Team to accurately cost quote device test development engineering hours, test platform hours, and the test hardware required to meet customer approved test plans. Work with the Operations Team to determine engineering feasibility and cost effectiveness for production-level test programs. Resolve technical problems using device/test debugging technics, and collection of test characterization data to reach engineering conclusions for driving corrective actions. Flexibility to perform other duties as assigned. JOB REQUIREMENTS INCLUDE (List as required or preferred ) Education: Bachelor's degree in Electrical Engineering preferred; however, a combination of education and experience wherein the skills and abilities to perform the responsibilities and functions have been adequately demonstrated is acceptable. Experience: 7-10 years of the following experience is required: Developing IC test solutions on automated test equipment such as Teradyne, Advantest, LTX-Credence, etc. platforms. Test program development of digital, analog or mixed signal integrated circuits. Utilize knowledge of programming techniques, electronic, test equipment, and test specifications to develop test programs to a set schedule. Read, analyze, and interpret semiconductor datasheets and test specifications to estimate test program development time and material costs. Program manage individual test developments from initial stage to completion while accurately reporting status to all stakeholders. Maintain a high level of attention to detail and accuracy to ensure data integrity. Utilize effective communication skills with internal and external customers to achieve required results. Effectively and efficiently utilize Microsoft Office and other computer products and programs. Knowledge/Skills/Overall Competences: Job Knowledge: Possesses and applies a comprehensive knowledge of a particular field of specialization to the completion of significant assignments. Comprehensive knowledge of products and product direction for all products. Level at which career may plateau. Technical Skill Having wide-ranging experience, uses professional concepts and company objectives to resolve significantly complex issues in creative and effective ways. Applies extensive expertise as a specialist to accomplish goals. Leads product design projects. An emerging authority in a particular field. Design/Planning: Task Definition, Design, Project Planning Understands company technical goals and direction and influences how it applies to work in the function. Accurately estimates time and resources necessary for projects. Coaches and leads others in the use of process and planning tools. Job Complexity Works on significant and complex issues where analysis of situations or data requires an in-depth evaluation of variable factors. Exercises independent judgment in selecting methods, techniques and evaluation criteria for obtaining results. Complexity of work requires ingenuity and creativity to solve problems and accomplish goals. Creates formal networks involving coordination among internal groups. Problem Resolution Identifies and resolves problems and issues outside of the assigned area. Develops solutions to complex problems that require the regular use of ingenuity and creativity. Serves as a mentor or consultant to others in solving problems or thinking through issues. Communication: Verbal/Written Consistently communicates effectively across organizational boundaries and externally to customers. Involved in cross-department projects in defining or solving problems. Interacts to share knowledge and solutions and to lead/serve on task teams or committees. Teamwork Leads others in gaining a common understanding through discussion. Clarifies team goals, expectations, ground rules and responsibilities. Makes progress even when ambiguity has not been resolved. Personal Leadership: Influencing, Impact, Affecting Change, Coaching Establishes product direction in related areas. Makes decisions that affect income, expenses, operations and customer relations that in turn directly influence activities and objectives of cross functional work groups or function. Sound decisions or recommendations result in successfully achieving critical company objectives and affect the image of the organization's technological capability. Effective in gaining buy-in. Coach/Develop others in many related areas. Supervision Required Duties are performed under minimal supervision with assignments given in terms of objectives and results expected. Operates with substantial latitude for un-reviewed actions or decisions. Determines methods and procedures on new assignments and may lead activities of other personal
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across air, land, sea, space and cyber domains. L3Harris has approximately $18 billion in annual revenue, 48,000 employees and customers in more than 100 countries. Job Tile: Lead, Electrical Engineering - Digital Hardware Job Code: 41862 Job Location: Palm Bay, FL Schedule: 9/80 (Employees work 80 hours over 9 days and have every other Friday off) Work Arrangement: On-Site Job Description L3Harris is seeking a Lead Electrical Engineer - Digital Hardware to join our team in Palm Bay, FL. In this role, you will support the design and development of advanced space-qualified digital hardware for mission-critical applications. This is an opportunity to contribute to innovative spacecraft and payload digital solutions in a fast-paced engineering environment where concepts move into production reality. The ideal candidate brings deep expertise in spacecraft electrical digital subsystem design, including digital architecture development, circuit simulation, detailed analysis, hardware verification, and cross-functional collaboration. This position will play a key role in supporting current and future programs, internal research and development efforts, and strategic growth initiatives. Essential Functions: Lead the design and development of advanced digital and mixed-signal hardware using sound electrical engineering principles and best practices. Support all phases of hardware development, including requirements analysis, architecture definition, detailed design, schematic capture, simulation, documentation, manufacturing, integration, and verification. Translate customer and system-level requirements into detailed electrical specifications and power architectures while balancing technical, cost, and Design and analyze digital and mixed-signal circuit topologies, including: Processor and microcontroller-based circuits FPGA, CPLD, and digital array designs Memory and storage interfaces ADC and DAC interface circuits High-speed digital communication interfaces Clock generation and distribution circuits Data acquisition and control circuits Mixed-signal interface circuits Reset, monitoring, and supervisory circuits Perform detailed analysis of digital circuits for: Timing and margin Thermal performance Signal integrity Power integrity Radiation effects EMI/EMC Component derating Troubleshoot and resolve hardware issues at the component, board, module, payload, and system levels. Use laboratory instruments such as oscilloscopes, source meters, electronic loads, signal generators, multimeters, and DC power supplies to validate designs and investigate issues. Conduct trade studies and develop conceptual digital solutions in support of proposals, IRAD, and new business opportunities. Collaborate with cross-functional teams including systems, firmware, software, mechanical, manufacturing, quality, supply chain, and program leadership. Evaluate component tolerances and environmental impacts to ensure robust design margins for high-reliability applications in harsh operating environments. Support risk reduction and mitigation activities related to obsolescence, cost, producibility, and long-lead materials. Required Qualifications: Bachelor's Degree and a minimum of 9 years of prior relevant experience in Electrical Engineering, Physics, Mathematics, Computer Science, or another relevant STEM field or Graduate Degree and a minimum of 7 years of prior related experience Experience designing and developing digital hardware systems Experience with high-speed or dense processing hardware architectures Experience with hardware integration, verification, and debug Experience working in a collaborative engineering development environment Preferred Qualifications: Ability to obtain a TS/SCI security clearance Experience with mission definition, concept generation, trade studies, preliminary and final design, component selection, integration, test support, materials selection, and design documentation Experience developing qualified deliverable power hardware for space, aerospace, defense, medical, or other mission-critical applications Experience working with manufacturing and production teams in a program environment Experience with Root Cause Corrective Action (RCCA) and Failure Review Boards (FRB) Experience presenting technical material to program leadership, customers, and review boards Strong written, verbal, and interpersonal communication skills Ability to collaborate effectively across technical teams and leadership levels Experience serving as a subcontract technical representative, including supplier evaluation, statement of work development, and technical oversight of external deliverables Experience with digital hardware design for phased array antenna systems, including beamforming control, high-speed data conversion, timing and synchronization, RF control interfaces, and mixed-signal circuit card assembly integration. Experience in one or more of the following areas including: Space-based hardware design High-speed digital design FPGA-based systems Processor and memory subsystem design DSP-based hardware Networking hardware Mixed-signal electronics Experience designing, integrating, and analyzing high-speed electrical and optical interfaces and protocols, including: 10/25 Gb Ethernet PCI Express Gen 2/3/4/5 Electrical-to-optical conversion Optical-to-electrical conversion Fiber-optic transceiver integration Experience with ECAD and analysis tools including: LTSpice PSpice Cadence Siemens Xpedition Hyperlynx 25.10 Experience integrating firmware/software with hardware in lab and system environments MATLAB, Python, or similar programming experience for modeling, analysis, and automation Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition . click apply for full job details
09/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across air, land, sea, space and cyber domains. L3Harris has approximately $18 billion in annual revenue, 48,000 employees and customers in more than 100 countries. Job Tile: Lead, Electrical Engineering - Digital Hardware Job Code: 41862 Job Location: Palm Bay, FL Schedule: 9/80 (Employees work 80 hours over 9 days and have every other Friday off) Work Arrangement: On-Site Job Description L3Harris is seeking a Lead Electrical Engineer - Digital Hardware to join our team in Palm Bay, FL. In this role, you will support the design and development of advanced space-qualified digital hardware for mission-critical applications. This is an opportunity to contribute to innovative spacecraft and payload digital solutions in a fast-paced engineering environment where concepts move into production reality. The ideal candidate brings deep expertise in spacecraft electrical digital subsystem design, including digital architecture development, circuit simulation, detailed analysis, hardware verification, and cross-functional collaboration. This position will play a key role in supporting current and future programs, internal research and development efforts, and strategic growth initiatives. Essential Functions: Lead the design and development of advanced digital and mixed-signal hardware using sound electrical engineering principles and best practices. Support all phases of hardware development, including requirements analysis, architecture definition, detailed design, schematic capture, simulation, documentation, manufacturing, integration, and verification. Translate customer and system-level requirements into detailed electrical specifications and power architectures while balancing technical, cost, and Design and analyze digital and mixed-signal circuit topologies, including: Processor and microcontroller-based circuits FPGA, CPLD, and digital array designs Memory and storage interfaces ADC and DAC interface circuits High-speed digital communication interfaces Clock generation and distribution circuits Data acquisition and control circuits Mixed-signal interface circuits Reset, monitoring, and supervisory circuits Perform detailed analysis of digital circuits for: Timing and margin Thermal performance Signal integrity Power integrity Radiation effects EMI/EMC Component derating Troubleshoot and resolve hardware issues at the component, board, module, payload, and system levels. Use laboratory instruments such as oscilloscopes, source meters, electronic loads, signal generators, multimeters, and DC power supplies to validate designs and investigate issues. Conduct trade studies and develop conceptual digital solutions in support of proposals, IRAD, and new business opportunities. Collaborate with cross-functional teams including systems, firmware, software, mechanical, manufacturing, quality, supply chain, and program leadership. Evaluate component tolerances and environmental impacts to ensure robust design margins for high-reliability applications in harsh operating environments. Support risk reduction and mitigation activities related to obsolescence, cost, producibility, and long-lead materials. Required Qualifications: Bachelor's Degree and a minimum of 9 years of prior relevant experience in Electrical Engineering, Physics, Mathematics, Computer Science, or another relevant STEM field or Graduate Degree and a minimum of 7 years of prior related experience Experience designing and developing digital hardware systems Experience with high-speed or dense processing hardware architectures Experience with hardware integration, verification, and debug Experience working in a collaborative engineering development environment Preferred Qualifications: Ability to obtain a TS/SCI security clearance Experience with mission definition, concept generation, trade studies, preliminary and final design, component selection, integration, test support, materials selection, and design documentation Experience developing qualified deliverable power hardware for space, aerospace, defense, medical, or other mission-critical applications Experience working with manufacturing and production teams in a program environment Experience with Root Cause Corrective Action (RCCA) and Failure Review Boards (FRB) Experience presenting technical material to program leadership, customers, and review boards Strong written, verbal, and interpersonal communication skills Ability to collaborate effectively across technical teams and leadership levels Experience serving as a subcontract technical representative, including supplier evaluation, statement of work development, and technical oversight of external deliverables Experience with digital hardware design for phased array antenna systems, including beamforming control, high-speed data conversion, timing and synchronization, RF control interfaces, and mixed-signal circuit card assembly integration. Experience in one or more of the following areas including: Space-based hardware design High-speed digital design FPGA-based systems Processor and memory subsystem design DSP-based hardware Networking hardware Mixed-signal electronics Experience designing, integrating, and analyzing high-speed electrical and optical interfaces and protocols, including: 10/25 Gb Ethernet PCI Express Gen 2/3/4/5 Electrical-to-optical conversion Optical-to-electrical conversion Fiber-optic transceiver integration Experience with ECAD and analysis tools including: LTSpice PSpice Cadence Siemens Xpedition Hyperlynx 25.10 Experience integrating firmware/software with hardware in lab and system environments MATLAB, Python, or similar programming experience for modeling, analysis, and automation Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition . click apply for full job details
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
09/26/2026
Full time
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
Job Description Job Description Ready to make connectivity from space universally accessible, secure and actionable? Then you've come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We're intentional, we're unapologetically curious and we're 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Overview We are seeking a Configuration Management (CM) Engineer to own and enforce product configuration control across engineering, manufacturing, and supply chain systems. The ideal candidate has a strong understanding of class I vs class II changes, product lifecycle management (PLM), and ERP bill-of-material (BOM) integrity. This role ensures that as-designed, as-planned, and as-built configurations align at every stage of production. Key Responsibilities - Define, implement, and enforce configuration control rules, including Class I vs Class II change thresholds (engineering vs minor production impacts). - Manage and maintain BOM integrity across ERP, PLM, and MES systems. - Perform as-built vs as-designed audits, ensuring hardware traceability between work orders, BOM revisions, and engineering documentation. - Collaborate with engineering to validatepart numbers, revisions, and metadata before release to the BOM. - Liaise with Planning and Production Control to ensure ERP BOMs accurately reflect approved configurations and effectivity dates. - Create and maintainchange control documentation, including ECOs, ECRs, deviations, and waivers. - Support ERP/PLM data migration, part-number standardization, and revision control efforts. - Develop configuration baselines for prototype, qualification, and flight hardware. - Participate in internal audits and ensure compliance with AS9100, ISO 9001, and company-specific QMS requirements. - Serve as a subject matter expert for configuration management processes and digital thread traceability. Qualifications - Bachelor's degree in Engineering, Manufacturing Systems, or related field. - 5-10 years of experience in Configuration Management, Product Lifecycle, or Systems Engineering within aerospace, defense, or complex hardware manufacturing. - Proven experience with ERP (e.g., NetSuite, SAP, Oracle) and PLM (e.g., Arena, Teamcenter, Windchill) systems. - Strong understanding of Engineering Change Control (ECO/ECR) and revision management. - Familiarity with BOM structures, serial number traceability, and work order management. - Excellent attention to detail, documentation, and cross-functional communication skills. - Knowledge of AS9100, ISO 9001, and ITAR compliance preferred. Additional Requirements This is a fast-paced, high-impact environment - flexibility to occasionally work extended hours or weekends during critical periods is expected. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That's why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference • Sustainability at our core • Fair and honest workplace • Innovative thinking is encouraged • Competitive salaries • Continuous learning and development • Health and wellness care options • Financial solutions for the future • Optional legal services (US only) • Paid holidays • Paid time off We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
09/26/2026
Full time
Job Description Job Description Ready to make connectivity from space universally accessible, secure and actionable? Then you've come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We're intentional, we're unapologetically curious and we're 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Overview We are seeking a Configuration Management (CM) Engineer to own and enforce product configuration control across engineering, manufacturing, and supply chain systems. The ideal candidate has a strong understanding of class I vs class II changes, product lifecycle management (PLM), and ERP bill-of-material (BOM) integrity. This role ensures that as-designed, as-planned, and as-built configurations align at every stage of production. Key Responsibilities - Define, implement, and enforce configuration control rules, including Class I vs Class II change thresholds (engineering vs minor production impacts). - Manage and maintain BOM integrity across ERP, PLM, and MES systems. - Perform as-built vs as-designed audits, ensuring hardware traceability between work orders, BOM revisions, and engineering documentation. - Collaborate with engineering to validatepart numbers, revisions, and metadata before release to the BOM. - Liaise with Planning and Production Control to ensure ERP BOMs accurately reflect approved configurations and effectivity dates. - Create and maintainchange control documentation, including ECOs, ECRs, deviations, and waivers. - Support ERP/PLM data migration, part-number standardization, and revision control efforts. - Develop configuration baselines for prototype, qualification, and flight hardware. - Participate in internal audits and ensure compliance with AS9100, ISO 9001, and company-specific QMS requirements. - Serve as a subject matter expert for configuration management processes and digital thread traceability. Qualifications - Bachelor's degree in Engineering, Manufacturing Systems, or related field. - 5-10 years of experience in Configuration Management, Product Lifecycle, or Systems Engineering within aerospace, defense, or complex hardware manufacturing. - Proven experience with ERP (e.g., NetSuite, SAP, Oracle) and PLM (e.g., Arena, Teamcenter, Windchill) systems. - Strong understanding of Engineering Change Control (ECO/ECR) and revision management. - Familiarity with BOM structures, serial number traceability, and work order management. - Excellent attention to detail, documentation, and cross-functional communication skills. - Knowledge of AS9100, ISO 9001, and ITAR compliance preferred. Additional Requirements This is a fast-paced, high-impact environment - flexibility to occasionally work extended hours or weekends during critical periods is expected. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That's why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference • Sustainability at our core • Fair and honest workplace • Innovative thinking is encouraged • Competitive salaries • Continuous learning and development • Health and wellness care options • Financial solutions for the future • Optional legal services (US only) • Paid holidays • Paid time off We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
