Job Description Job Description Description FII USA, Inc ., a Foxconn Technology Group Company, is seeking a Failure Analysis Engineer to perform engineering investigations of significant customer field and line escalations related to hardware issues and collaborate with numerous internal engineering disciplines to resolve hardware issues. Once a part of the team, you will be responsible for a wide variety of tasks within the Supporting Quality Department in an office environment and have the opportunity to display critical thinking skills to expand your career in Smart Manufacturing. The Failure Analysis Engineer will monitor test failure trends in NPI, provide corrective actions to improve production test yields, and assist this Supporting Quality Department as needed. Responsibilities Interface with customers and internal cross-functional teams to root cause hardware issues to the component level Perform engineering investigations of significant customer field and line escalations related to hardware issues Monitor test failure trends in NPI and provide corrective actions to improve production test yields Design and develop debug tools to improve debug process and efficiency Provide training to technicians and debug team on new and existing debug procedures and product troubleshooting Support internal communications of techniques and processes for WW RMA & Service Centers Drive "best practices" across WW Operational, RMA & Service Sites Program manage CSP/Enterprise account Reliability requirements Facilitate Reliability strategy discussions Other duties as assigned Qualifications Bachelor's or Master's degree in electrical or computer engineering required Minimum of 4 years' experience designing and debugging Industry Standard Computing platforms required Experience in hardware/firmware/software development and test methodologies preferred Knowledge of key server technologies including Intel, AMD, ARM multi-core microprocessors, DDR 4/5 and NAND memory, and PCA design preferred Reasons you should work for us: Comprehensive benefits package including medical, dental, and vision insurance coverage. Basic life insurance and short-term disability coverage provided by employer. Supplemental life insurance and long-term disability coverage options available. 401K with employer contribution. Personal, Vacation, and Holiday paid time off for all full-time employees. Onsite Aurora Health & Wellness Center available for all employees. Employees are continuously encouraged to learn and grow their careers in smart manufacturing.
11/11/2026
Full time
Job Description Job Description Description FII USA, Inc ., a Foxconn Technology Group Company, is seeking a Failure Analysis Engineer to perform engineering investigations of significant customer field and line escalations related to hardware issues and collaborate with numerous internal engineering disciplines to resolve hardware issues. Once a part of the team, you will be responsible for a wide variety of tasks within the Supporting Quality Department in an office environment and have the opportunity to display critical thinking skills to expand your career in Smart Manufacturing. The Failure Analysis Engineer will monitor test failure trends in NPI, provide corrective actions to improve production test yields, and assist this Supporting Quality Department as needed. Responsibilities Interface with customers and internal cross-functional teams to root cause hardware issues to the component level Perform engineering investigations of significant customer field and line escalations related to hardware issues Monitor test failure trends in NPI and provide corrective actions to improve production test yields Design and develop debug tools to improve debug process and efficiency Provide training to technicians and debug team on new and existing debug procedures and product troubleshooting Support internal communications of techniques and processes for WW RMA & Service Centers Drive "best practices" across WW Operational, RMA & Service Sites Program manage CSP/Enterprise account Reliability requirements Facilitate Reliability strategy discussions Other duties as assigned Qualifications Bachelor's or Master's degree in electrical or computer engineering required Minimum of 4 years' experience designing and debugging Industry Standard Computing platforms required Experience in hardware/firmware/software development and test methodologies preferred Knowledge of key server technologies including Intel, AMD, ARM multi-core microprocessors, DDR 4/5 and NAND memory, and PCA design preferred Reasons you should work for us: Comprehensive benefits package including medical, dental, and vision insurance coverage. Basic life insurance and short-term disability coverage provided by employer. Supplemental life insurance and long-term disability coverage options available. 401K with employer contribution. Personal, Vacation, and Holiday paid time off for all full-time employees. Onsite Aurora Health & Wellness Center available for all employees. Employees are continuously encouraged to learn and grow their careers in smart manufacturing.
Job Description Job Description Software Guidance & Assistance, Inc. (SGA) is searching for a Sr Engineer -Software and Controls Test for a contract opportunity with one of our premier clients in Oshkosh, WI The Sr Engineer - Software and Controls Test team member will test high-quality vehicle control subsystem software. The team member must be able to develop and execute test plans as well as design and maintain HIL infrastructure. The team member will be an integral part of multiple projects and responsible for peer reviewing others software. Travel: 15% Responsibilities : Under supervision, perform engineering calculations, investigations, and tasks as assigned according to the client, as well as general industry, engineering standards and processes. Support more senior engineers in the preparation of plans, designs, computation methods, and/or reporting. Responsible for a project or part of a project of limited complexity. May be responsible for managing multiple projects. Collaborate as needed with other engineering or business support disciplines internally as well as suppliers externally. Provide guidance or mentorship to entry level engineers, designers, or technicians working on a common project. Ability to write and peer review high-quality, maintainable, test scripts. Responsible for HIL platforms such as dSPACE, NI, Vector, ETAS Improving HIL infrastructure so testing is repeatable, scalable, and available to development teams. Developing plant or subsystem simulations representing the physical system controlled by the ECU. Capturing synchronized network, I/O, diagnostic, and internal software data. Integrate production or prototype ECUs/controllers into HIL test benches and validate hardware/software interfaces. Executing automated regression testing and support continuous integration/continuous testing workflows. Responsible for quality conscious design including cost and reliability. Participate in peer reviews, estimation, and other engineering activities. Follow defined CMMI level 3 procedures in the writing of software. Ability to travel off-site to support engineering projects. Develop comprehensive test plans to verify safety and reliability of electronic systems. Conduct testing across multiple platforms, in both simulation and real-world use cases. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical subject matter. Process engineering information through CMMI level 3 procedures and software safety process. Ensure that technical issues are conducted within the framework of company policies and procedures. Evaluate designs for performance, safety, and reliability. Establishes priorities for work delegated to others. Prepare technical proposals, quotations, reports, and presentations. Other duties as assigned. Regular attendance is required. Requirements : Accredited Bachelor's degree in Engineering or related field with three (3) or more years of related experience. Hands-on approach to troubleshooting hardware and software issues. Experience with automotive, commercial vehicle, off-highway, industrial, or similar embedded communication protocols such as CAN and J1939. Knowledge of functional safety, cybersecurity, or safety-critical embedded development practices. Experience testing complex vehicle, mobile equipment, electrification, powertrain, hydraulic, or distributed control systems. Preferred Skills : Accredited Bachelor's degree in Computer Science, Computer or Electrical Engineering. Familiarity with HIL platforms such as dSPACE, NI, Vector, ETAS By applying for a job with SGA, you agree to allow SGA to process your application for this and future opportunities in accordance with our Privacy Policy. Also, to ensure timely processing, you agree to be contacted by our AI recruiter via email, text, or phone. Message frequency varies and data rates may apply, but you can reply STOP to any SMS message to opt-out of texts and may contact SGA at to opt-out of AI communications. The choice not to engage with AI will not adversely impact your consideration for placement. AI is not used to make any hiring determinations. SGA is a technology and resource solutions provider driven to stand out. We are a women-owned business. Our mission: to solve big IT problems with a more personal, boutique approach. Each year, we match consultants like you to more than 1,000 engagements. When we say let's work better together, we mean it. You'll join a diverse team built on these core values: customer service, employee development, and quality and integrity in everything we do. Be yourself, love what you do and find your passion at work. Please find us at . SGA is an Equal Opportunity Employer and does not discriminate on the basis of Race, Color, Sex, Sexual Orientation, Gender Identity, Religion, National Origin, Disability, Veteran Status, Age, Marital Status, Pregnancy, Genetic Information, or Other Legally Protected Status. We are committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, and our services, programs, and activities. Please visit our company EEO page to request an accommodation or assistance regarding our policy.
11/11/2026
Full time
Job Description Job Description Software Guidance & Assistance, Inc. (SGA) is searching for a Sr Engineer -Software and Controls Test for a contract opportunity with one of our premier clients in Oshkosh, WI The Sr Engineer - Software and Controls Test team member will test high-quality vehicle control subsystem software. The team member must be able to develop and execute test plans as well as design and maintain HIL infrastructure. The team member will be an integral part of multiple projects and responsible for peer reviewing others software. Travel: 15% Responsibilities : Under supervision, perform engineering calculations, investigations, and tasks as assigned according to the client, as well as general industry, engineering standards and processes. Support more senior engineers in the preparation of plans, designs, computation methods, and/or reporting. Responsible for a project or part of a project of limited complexity. May be responsible for managing multiple projects. Collaborate as needed with other engineering or business support disciplines internally as well as suppliers externally. Provide guidance or mentorship to entry level engineers, designers, or technicians working on a common project. Ability to write and peer review high-quality, maintainable, test scripts. Responsible for HIL platforms such as dSPACE, NI, Vector, ETAS Improving HIL infrastructure so testing is repeatable, scalable, and available to development teams. Developing plant or subsystem simulations representing the physical system controlled by the ECU. Capturing synchronized network, I/O, diagnostic, and internal software data. Integrate production or prototype ECUs/controllers into HIL test benches and validate hardware/software interfaces. Executing automated regression testing and support continuous integration/continuous testing workflows. Responsible for quality conscious design including cost and reliability. Participate in peer reviews, estimation, and other engineering activities. Follow defined CMMI level 3 procedures in the writing of software. Ability to travel off-site to support engineering projects. Develop comprehensive test plans to verify safety and reliability of electronic systems. Conduct testing across multiple platforms, in both simulation and real-world use cases. Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical subject matter. Process engineering information through CMMI level 3 procedures and software safety process. Ensure that technical issues are conducted within the framework of company policies and procedures. Evaluate designs for performance, safety, and reliability. Establishes priorities for work delegated to others. Prepare technical proposals, quotations, reports, and presentations. Other duties as assigned. Regular attendance is required. Requirements : Accredited Bachelor's degree in Engineering or related field with three (3) or more years of related experience. Hands-on approach to troubleshooting hardware and software issues. Experience with automotive, commercial vehicle, off-highway, industrial, or similar embedded communication protocols such as CAN and J1939. Knowledge of functional safety, cybersecurity, or safety-critical embedded development practices. Experience testing complex vehicle, mobile equipment, electrification, powertrain, hydraulic, or distributed control systems. Preferred Skills : Accredited Bachelor's degree in Computer Science, Computer or Electrical Engineering. Familiarity with HIL platforms such as dSPACE, NI, Vector, ETAS By applying for a job with SGA, you agree to allow SGA to process your application for this and future opportunities in accordance with our Privacy Policy. Also, to ensure timely processing, you agree to be contacted by our AI recruiter via email, text, or phone. Message frequency varies and data rates may apply, but you can reply STOP to any SMS message to opt-out of texts and may contact SGA at to opt-out of AI communications. The choice not to engage with AI will not adversely impact your consideration for placement. AI is not used to make any hiring determinations. SGA is a technology and resource solutions provider driven to stand out. We are a women-owned business. Our mission: to solve big IT problems with a more personal, boutique approach. Each year, we match consultants like you to more than 1,000 engagements. When we say let's work better together, we mean it. You'll join a diverse team built on these core values: customer service, employee development, and quality and integrity in everything we do. Be yourself, love what you do and find your passion at work. Please find us at . SGA is an Equal Opportunity Employer and does not discriminate on the basis of Race, Color, Sex, Sexual Orientation, Gender Identity, Religion, National Origin, Disability, Veteran Status, Age, Marital Status, Pregnancy, Genetic Information, or Other Legally Protected Status. We are committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, and our services, programs, and activities. Please visit our company EEO page to request an accommodation or assistance regarding our policy.
Job Description Onsite Support - Field Service Join our dynamic team as an Onsite Support - Field Service professional, where you'll be at the forefront of delivering exceptional end-user support across multiple client locations. If you have a passion for problem-solving and thrive in a fast-paced environment, this is the perfect opportunity for you! The Role The Onsite Support role manages day-to-day onsite end-user support delivery across one or more client locations. The role owns delivery of IMAC requests, break-fix incidents and infrastructure project support, and is accountable for SLA attainment, customer satisfaction. Pay Rate Transparency Pay Range: $40000 - $45000 / annum. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). What You'll Do Monitor team queues in the ITSM tool; assign, balance and re-prioritize work based on impact, urgency and SLA. Coordinate VIP and executive support, critical incidents and site outages. Balance BAU tickets against project work so neither breaches commitments. Escalate and coordinate with Service Desk, L3 resolver groups, network, server and vendor teams. Own fulfillment of Install, Move, Add and Change requests for end-user devices and peripherals. Deliver and set up computers, peripherals and software for end users. Image computers using bootable USB media and deploy them to end users. Oversee device refresh and redeployment across sites. Ensure accurate asset tagging, CMDB updates and asset lifecycle records for every IMAC action. Take Level 1 and Level 2 calls and walk-ups from end users and log them in ServiceDesk Plus; resolve issues ranging from password resets to hardware and software troubleshooting. Provide desk-side support when issues require hands-on troubleshooting. Ensure timely resolution of desktop, laptop, printer, mobile, AV and peripheral incidents. Escalate issues to the appropriate ServiceDesk Plus resolver groups. Coordinate with vendor technicians to repair hardware under warranty; manage spare-parts inventory. Drive problem management for recurring issues and implement permanent fixes. Manage user and computer assets using Active Directory, Microsoft System Center Configuration Manager (SCCM), ManageEngine, CrowdStrike and Okta. Manage surplus out-of-warranty equipment: wipe hard drives, remove computer objects from the network and prepare equipment for sale on GovDeals. Manage Webex accounts for Medicaid call center users. Plan onsite support for infrastructure projects: hardware refresh, OS and application migrations, office moves, network cutovers and site build-outs. Participate in project planning, provide effort estimates and resource plans, and report progress against milestones. Coordinate after-hours and weekend change windows following the change management process. Ensure adherence to ITIL processes: incident, request, change, problem, asset and knowledge management. Maintain site SOPs, runbooks and knowledge articles; drive ticket quality audits. Identify continual service improvement and automation opportunities to reduce onsite effort. Ensure compliance with security, safety and data-handling policies. What You Bring 2-4 years in IT end-user / field services support. Working knowledge of incident, request, change, problem and asset management. Hands-on experience with ITSM tools such as ManageEngine ServiceDesk Plus, ServiceNow or BMC Remedy/Helix, including queue management, dashboards and reporting. Strong technical background in Windows and macOS endpoints, M365, Active Directory / Entra ID, Okta, CrowdStrike, Webex, printers, mobile devices and basic networking. Working knowledge of endpoint management tools such as SCCM/MECM, ManageEngine, Intune or JAMF, including imaging with bootable USB media. Demonstrated ability to manage competing priorities, SLAs and escalations under pressure. Excellent communication and stakeholder management skills with end users, VIPs and client leadership. Valid driver's license and ability to travel between sites; ability to lift up to 50 lbs. Why Work With Us Opportunity to work in a dynamic and fast-paced environment. Be part of a team that values innovation and continuous improvement. Access to comprehensive employee benefits and growth opportunities. Equal Employment Opportunity Pyramid Consulting, Inc. / Hoonr provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
11/11/2026
Full time
Job Description Onsite Support - Field Service Join our dynamic team as an Onsite Support - Field Service professional, where you'll be at the forefront of delivering exceptional end-user support across multiple client locations. If you have a passion for problem-solving and thrive in a fast-paced environment, this is the perfect opportunity for you! The Role The Onsite Support role manages day-to-day onsite end-user support delivery across one or more client locations. The role owns delivery of IMAC requests, break-fix incidents and infrastructure project support, and is accountable for SLA attainment, customer satisfaction. Pay Rate Transparency Pay Range: $40000 - $45000 / annum. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). What You'll Do Monitor team queues in the ITSM tool; assign, balance and re-prioritize work based on impact, urgency and SLA. Coordinate VIP and executive support, critical incidents and site outages. Balance BAU tickets against project work so neither breaches commitments. Escalate and coordinate with Service Desk, L3 resolver groups, network, server and vendor teams. Own fulfillment of Install, Move, Add and Change requests for end-user devices and peripherals. Deliver and set up computers, peripherals and software for end users. Image computers using bootable USB media and deploy them to end users. Oversee device refresh and redeployment across sites. Ensure accurate asset tagging, CMDB updates and asset lifecycle records for every IMAC action. Take Level 1 and Level 2 calls and walk-ups from end users and log them in ServiceDesk Plus; resolve issues ranging from password resets to hardware and software troubleshooting. Provide desk-side support when issues require hands-on troubleshooting. Ensure timely resolution of desktop, laptop, printer, mobile, AV and peripheral incidents. Escalate issues to the appropriate ServiceDesk Plus resolver groups. Coordinate with vendor technicians to repair hardware under warranty; manage spare-parts inventory. Drive problem management for recurring issues and implement permanent fixes. Manage user and computer assets using Active Directory, Microsoft System Center Configuration Manager (SCCM), ManageEngine, CrowdStrike and Okta. Manage surplus out-of-warranty equipment: wipe hard drives, remove computer objects from the network and prepare equipment for sale on GovDeals. Manage Webex accounts for Medicaid call center users. Plan onsite support for infrastructure projects: hardware refresh, OS and application migrations, office moves, network cutovers and site build-outs. Participate in project planning, provide effort estimates and resource plans, and report progress against milestones. Coordinate after-hours and weekend change windows following the change management process. Ensure adherence to ITIL processes: incident, request, change, problem, asset and knowledge management. Maintain site SOPs, runbooks and knowledge articles; drive ticket quality audits. Identify continual service improvement and automation opportunities to reduce onsite effort. Ensure compliance with security, safety and data-handling policies. What You Bring 2-4 years in IT end-user / field services support. Working knowledge of incident, request, change, problem and asset management. Hands-on experience with ITSM tools such as ManageEngine ServiceDesk Plus, ServiceNow or BMC Remedy/Helix, including queue management, dashboards and reporting. Strong technical background in Windows and macOS endpoints, M365, Active Directory / Entra ID, Okta, CrowdStrike, Webex, printers, mobile devices and basic networking. Working knowledge of endpoint management tools such as SCCM/MECM, ManageEngine, Intune or JAMF, including imaging with bootable USB media. Demonstrated ability to manage competing priorities, SLAs and escalations under pressure. Excellent communication and stakeholder management skills with end users, VIPs and client leadership. Valid driver's license and ability to travel between sites; ability to lift up to 50 lbs. Why Work With Us Opportunity to work in a dynamic and fast-paced environment. Be part of a team that values innovation and continuous improvement. Access to comprehensive employee benefits and growth opportunities. Equal Employment Opportunity Pyramid Consulting, Inc. / Hoonr provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. By applying to our jobs, you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
Job Description Geospatial Support Specialist - LP360 Software Location: Huntsville, AL (On-site) Department: Customer Success About the Role We're looking for a Geospatial Support Specialist to join our LP360 Customer Success team. This role is ideal for someone with a background in GIS, LiDAR, or GNSS who enjoys solving technical problems and helping customers succeed with complex mapping workflows. You'll be the first line of support for our LP360 software users-responding to support tickets, diagnosing issues with LiDAR and imagery processing, and guiding customers through best practices in geospatial data handling. What You'll Do Respond to and resolve support tickets related to LP360 software and geospatial workflows. Troubleshoot issues involving LiDAR classification, GNSS trajectory alignment, point cloud visualization, and orthophoto generation. Assist customers with data import/export, coordinate system setup, and workflow optimization. Document solutions and contribute to our knowledge base and training materials. Collaborate with product and engineering teams to escalate bugs or feature requests. Provide occasional remote or on-site training for customers. What You Bring Experience with geospatial software such as LP360, ArcGIS, QGIS, Global Mapper, or similar. Familiarity with GNSS post-processing, trajectory QC, or surveying principles. Strong problem-solving and communication skills. Ability to explain technical concepts to non-technical users. Bonus: Experience with drone mapping, photogrammetry, or LiDAR sensors. Preferred Qualifications Degree or certification in GIS, Geomatics, Surveying, Remote Sensing, or a related field. 1-3 years of experience in a technical support, field technician, or geospatial analyst role. Comfortable using ticketing systems (e.g., Freshdesk, Zendesk) and remote support tools. Why Join Us? Work with a passionate team building cutting-edge geospatial tools. Help shape the future of LiDAR and drone mapping workflows. Grow your career in a company that values customer success and technical excellence.
11/11/2026
Full time
Job Description Geospatial Support Specialist - LP360 Software Location: Huntsville, AL (On-site) Department: Customer Success About the Role We're looking for a Geospatial Support Specialist to join our LP360 Customer Success team. This role is ideal for someone with a background in GIS, LiDAR, or GNSS who enjoys solving technical problems and helping customers succeed with complex mapping workflows. You'll be the first line of support for our LP360 software users-responding to support tickets, diagnosing issues with LiDAR and imagery processing, and guiding customers through best practices in geospatial data handling. What You'll Do Respond to and resolve support tickets related to LP360 software and geospatial workflows. Troubleshoot issues involving LiDAR classification, GNSS trajectory alignment, point cloud visualization, and orthophoto generation. Assist customers with data import/export, coordinate system setup, and workflow optimization. Document solutions and contribute to our knowledge base and training materials. Collaborate with product and engineering teams to escalate bugs or feature requests. Provide occasional remote or on-site training for customers. What You Bring Experience with geospatial software such as LP360, ArcGIS, QGIS, Global Mapper, or similar. Familiarity with GNSS post-processing, trajectory QC, or surveying principles. Strong problem-solving and communication skills. Ability to explain technical concepts to non-technical users. Bonus: Experience with drone mapping, photogrammetry, or LiDAR sensors. Preferred Qualifications Degree or certification in GIS, Geomatics, Surveying, Remote Sensing, or a related field. 1-3 years of experience in a technical support, field technician, or geospatial analyst role. Comfortable using ticketing systems (e.g., Freshdesk, Zendesk) and remote support tools. Why Join Us? Work with a passionate team building cutting-edge geospatial tools. Help shape the future of LiDAR and drone mapping workflows. Grow your career in a company that values customer success and technical excellence.
Job Description Desktop Support Technician 3-6 months(Possibility for extension) Phoenix, AZ, USA, 85027 Role Overview : Looking for contractor for Windows 11. Might involve either making it available through windows updates but not everyone will be able to do it that way, might have to swap out assets for new laptop. Provide shipping or pick up laptops. Help with project. Provide technical support for desktop computer software programs, trouble shoot computer issues and deploy new computers to end users . Key Roles & Responsibilities: Perform technical troubleshooting and diagnose equipment-related issues. Identify and resolve technical problems to minimize operational downtime. Monitor and support the operation of machines and related systems. Conduct equipment diagnostics and identify potential issues. Provide technical support to ensure smooth day-to-day operations. Work with relevant tools and systems used by the client. Communicate technical issues and resolutions effectively with the team. Offer technical support and daily guidance to our end users Resolve technical problems for internal and external customers. Follow up with customers to ensure issue resolution. Troubleshoot and solve problems with vendors and systems. Handle sensitive information with confidentiality. Technical Skills & Requirements Hands-on experience with technical troubleshooting and diagnostics is preferred. Experience with Cherwell (IT Service Management platform) is preferred, as it is one of the tools used by the client. Familiarity with other systems and tools currently used at the site will be an added advantage. PowerShell knowledge is a good-to-have skill but is not mandatory. Previous experience with equipment diagnostics will be an added advantage. Candidates with experience working in similar technical environments will be preferred. Minimum 4 years of related experience. Certifications such as A+, Net+, MCP, or CCNA preferred. Advanced proficiency in Microsoft Office Suite and Windows 11. Preferred Qualifications: Microsoft AutoPilot, Microsoft Intune, Powershell, Dell Hardware Support, Bomgar, PatchMyPC, BeyondTrust. Prioritize candidates with practical technical troubleshooting experience. hands-on equipment and machine diagnostics experience. Cherwell experience is preferred. PowerShell knowledge is a plus, not a mandatory requirement. Focus on candidates with experience working in similar systems and technical environments. Education: Associate's degree in computer science or related field, or equivalent experience. Interview Process: The selection process will consist of two rounds of interviews. Both rounds will be conducted virtually via Microsoft Teams. Interviews will be conducted on a rolling basis. A follow-up discussion may be scheduled after the second round, if required. Applicant Notices & Disclaimers For information on benefits, equal opportunity employment, and location-specific applicant notices, click here At SPECTRAFORCE, we are committed to maintaining a workplace that ensures fair compensation and wage transparency in adherence with all applicable state and local laws.This position's pay range is $25.00/hr - $29.00/hr.
11/11/2026
Full time
Job Description Desktop Support Technician 3-6 months(Possibility for extension) Phoenix, AZ, USA, 85027 Role Overview : Looking for contractor for Windows 11. Might involve either making it available through windows updates but not everyone will be able to do it that way, might have to swap out assets for new laptop. Provide shipping or pick up laptops. Help with project. Provide technical support for desktop computer software programs, trouble shoot computer issues and deploy new computers to end users . Key Roles & Responsibilities: Perform technical troubleshooting and diagnose equipment-related issues. Identify and resolve technical problems to minimize operational downtime. Monitor and support the operation of machines and related systems. Conduct equipment diagnostics and identify potential issues. Provide technical support to ensure smooth day-to-day operations. Work with relevant tools and systems used by the client. Communicate technical issues and resolutions effectively with the team. Offer technical support and daily guidance to our end users Resolve technical problems for internal and external customers. Follow up with customers to ensure issue resolution. Troubleshoot and solve problems with vendors and systems. Handle sensitive information with confidentiality. Technical Skills & Requirements Hands-on experience with technical troubleshooting and diagnostics is preferred. Experience with Cherwell (IT Service Management platform) is preferred, as it is one of the tools used by the client. Familiarity with other systems and tools currently used at the site will be an added advantage. PowerShell knowledge is a good-to-have skill but is not mandatory. Previous experience with equipment diagnostics will be an added advantage. Candidates with experience working in similar technical environments will be preferred. Minimum 4 years of related experience. Certifications such as A+, Net+, MCP, or CCNA preferred. Advanced proficiency in Microsoft Office Suite and Windows 11. Preferred Qualifications: Microsoft AutoPilot, Microsoft Intune, Powershell, Dell Hardware Support, Bomgar, PatchMyPC, BeyondTrust. Prioritize candidates with practical technical troubleshooting experience. hands-on equipment and machine diagnostics experience. Cherwell experience is preferred. PowerShell knowledge is a plus, not a mandatory requirement. Focus on candidates with experience working in similar systems and technical environments. Education: Associate's degree in computer science or related field, or equivalent experience. Interview Process: The selection process will consist of two rounds of interviews. Both rounds will be conducted virtually via Microsoft Teams. Interviews will be conducted on a rolling basis. A follow-up discussion may be scheduled after the second round, if required. Applicant Notices & Disclaimers For information on benefits, equal opportunity employment, and location-specific applicant notices, click here At SPECTRAFORCE, we are committed to maintaining a workplace that ensures fair compensation and wage transparency in adherence with all applicable state and local laws.This position's pay range is $25.00/hr - $29.00/hr.
Job Description Job Description Are you hands-on, reliable, and ready to help build something that truly connects communities? Do you enjoy working outdoors, solving problems, and being part of a growing team that keeps people connected? Socket is looking for a Network Fiber Technician I to join our field operations team. In this role, you'll install, maintain, and repair fiber lines and systems that deliver high-speed internet to homes and businesses across our expanding network. From bucket trucks to problem-solving, you'll help power the infrastructure that fuels the future-and our communities. This is a great fit for someone who's mechanically inclined, takes pride in their work, and enjoys a fast-paced environment. A Day in the Life You'll start your day reviewing scheduled installs or repairs, loading up your equipment, and heading into the field. One job may require you to pull fiber to a new home, while the next has you up in the bucket truck making aerial repairs. Throughout the day, you'll coordinate with dispatch, document your work, and make sure everything is completed safely and correctly. Whether it's installing new service or restoring downed lines, your work directly impacts the quality of life for our customers. What You'll Do Key responsibilities include: Install, maintain, and repair mainline and service fiber cables and related equipment Familiarity with bucket truck operation for occasional backup work Be prepared to dispatch to trouble ticket issues to resolve problems and help customers get back online Follow all safety protocols and standards on every job site Maintain accurate documentation and communicate clearly with team members and supervisors Provide responsive, courteous service during installations or repairs Maintain a valid driver's license and clean driving record Lift, carry, push, or pull up to 75 lbs as part of daily tasks Show up consistently and ready to work in all weather conditions What Will Help You Stand Out Preferred Qualifications: Previous experience in fiber, construction, or utility work Basic splicing knowledge Some college or technical training preferred Prior experience with aerial construction or working from a bucket truck Flexible and solutions-oriented when challenges arise Comfortable working independently or with a small team What We're Looking For To be considered for this role, you'll need the following required qualifications: High school diploma or equivalent Valid driver's license with clean driving record Ability to work outdoors in all types of weather Ability to lift 50-70 lbs Ability to follow safety procedures and perform physically demanding tasks Strong teamwork and communication skills Self-motivated and dependable Willingness to learn and adapt in a fast-moving environment Why Join Socket? At Socket Fiber, we're redefining what it means to connect communities. We share a mission-driven culture focused on bringing high-speed internet to areas that need it most. We're not just selling a service-we're providing access, opportunity, and real change. Socket Fiber offers a culture where employee strengths are highlighted and recognized. A few of the key ways we strive to make employees feel valued include: Competitive pay Medical, dental, vision, life, and 401k with match Free coaching/counseling for employees & families Free fiber service (if available in your area) Tuition reimbursement for personal and professional growth Community engagement opportunities Culture that values results, effort, and integrity Our Core Values Respect : Toward all customers, communities, property, and coworkers. Advocacy: In-person, online, or by phone-we go beyond support to serve as customer advocates. Transparency : In our commitments, service experiences, and business relationships. Progress : Growth is proof of our dedication to improving lives and communities. Winning : Every conversation is a chance to gain a customer for life. Ready to Apply? If you're ready to grow your skills and be part of a team committed to keeping communities connected- apply today! This role is not eligible for Visa sponsorship. Salary and benefits commensurate with experience. Equal Opportunity Employer. This employer uses everify. This role is not eligible for relocation.
11/11/2026
Full time
Job Description Job Description Are you hands-on, reliable, and ready to help build something that truly connects communities? Do you enjoy working outdoors, solving problems, and being part of a growing team that keeps people connected? Socket is looking for a Network Fiber Technician I to join our field operations team. In this role, you'll install, maintain, and repair fiber lines and systems that deliver high-speed internet to homes and businesses across our expanding network. From bucket trucks to problem-solving, you'll help power the infrastructure that fuels the future-and our communities. This is a great fit for someone who's mechanically inclined, takes pride in their work, and enjoys a fast-paced environment. A Day in the Life You'll start your day reviewing scheduled installs or repairs, loading up your equipment, and heading into the field. One job may require you to pull fiber to a new home, while the next has you up in the bucket truck making aerial repairs. Throughout the day, you'll coordinate with dispatch, document your work, and make sure everything is completed safely and correctly. Whether it's installing new service or restoring downed lines, your work directly impacts the quality of life for our customers. What You'll Do Key responsibilities include: Install, maintain, and repair mainline and service fiber cables and related equipment Familiarity with bucket truck operation for occasional backup work Be prepared to dispatch to trouble ticket issues to resolve problems and help customers get back online Follow all safety protocols and standards on every job site Maintain accurate documentation and communicate clearly with team members and supervisors Provide responsive, courteous service during installations or repairs Maintain a valid driver's license and clean driving record Lift, carry, push, or pull up to 75 lbs as part of daily tasks Show up consistently and ready to work in all weather conditions What Will Help You Stand Out Preferred Qualifications: Previous experience in fiber, construction, or utility work Basic splicing knowledge Some college or technical training preferred Prior experience with aerial construction or working from a bucket truck Flexible and solutions-oriented when challenges arise Comfortable working independently or with a small team What We're Looking For To be considered for this role, you'll need the following required qualifications: High school diploma or equivalent Valid driver's license with clean driving record Ability to work outdoors in all types of weather Ability to lift 50-70 lbs Ability to follow safety procedures and perform physically demanding tasks Strong teamwork and communication skills Self-motivated and dependable Willingness to learn and adapt in a fast-moving environment Why Join Socket? At Socket Fiber, we're redefining what it means to connect communities. We share a mission-driven culture focused on bringing high-speed internet to areas that need it most. We're not just selling a service-we're providing access, opportunity, and real change. Socket Fiber offers a culture where employee strengths are highlighted and recognized. A few of the key ways we strive to make employees feel valued include: Competitive pay Medical, dental, vision, life, and 401k with match Free coaching/counseling for employees & families Free fiber service (if available in your area) Tuition reimbursement for personal and professional growth Community engagement opportunities Culture that values results, effort, and integrity Our Core Values Respect : Toward all customers, communities, property, and coworkers. Advocacy: In-person, online, or by phone-we go beyond support to serve as customer advocates. Transparency : In our commitments, service experiences, and business relationships. Progress : Growth is proof of our dedication to improving lives and communities. Winning : Every conversation is a chance to gain a customer for life. Ready to Apply? If you're ready to grow your skills and be part of a team committed to keeping communities connected- apply today! This role is not eligible for Visa sponsorship. Salary and benefits commensurate with experience. Equal Opportunity Employer. This employer uses everify. This role is not eligible for relocation.
Job Description Job Description Description As the Composites Manufacturing Manager at Impulse , you will hire, manage, and mentor composites manufacturing engineers and technicians across two shifts to support hardware builds for Impulse's composite structures. You will support activities ranging from lamination, bonding, curing, mechanical assembly, new process development, and hardware integration. You will work directly with leaders and individual contributors in other disciplines. You will have the opportunity to contribute to all aspects of composites development. Responsibilities Hire and mentor composites manufacturing engineers and technicians Collaborate with design engineers and quality teams to ensure manufacturability, design for manufacturing (DFM) compliance, and long-term reliability Set daily and weekly production targets, backed by performance metrics Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields Develop, document, and optimize manufacturing processes for hardware, including lamination, bonding, curing, mechanical assembly, and hardware integration Develop new production processes for unique composites applications, such as high-temperature composites, and weight-saving COPV technologies Establish and maintain high technical standards through specifications and training Setup equipment maintenance plans, and take actions to improve robustness, reliability, and reduce downtime Minimum Qualifications Bachelor's degree in Mechanical Engineering, Chemical Engineering, or related field 5+ years professional experience manufacturing structural aerospace hardware Professional experience managing and growing a team Desire to improve team processes and train other team members Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience Master's degree in Mechanical Engineering, Chemical Engineering, or related field 5+ years of demonstrated experience with composites manufacturing for in-space vehicles 2+ years of full lifecycle experience (design, low-rate production, scaled production) with COPV's and COPV liners Demonstrated experience managing both exempt and non-exempt employees within a manufacturing environment Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options , and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan . Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
11/11/2026
Full time
Job Description Job Description Description As the Composites Manufacturing Manager at Impulse , you will hire, manage, and mentor composites manufacturing engineers and technicians across two shifts to support hardware builds for Impulse's composite structures. You will support activities ranging from lamination, bonding, curing, mechanical assembly, new process development, and hardware integration. You will work directly with leaders and individual contributors in other disciplines. You will have the opportunity to contribute to all aspects of composites development. Responsibilities Hire and mentor composites manufacturing engineers and technicians Collaborate with design engineers and quality teams to ensure manufacturability, design for manufacturing (DFM) compliance, and long-term reliability Set daily and weekly production targets, backed by performance metrics Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields Develop, document, and optimize manufacturing processes for hardware, including lamination, bonding, curing, mechanical assembly, and hardware integration Develop new production processes for unique composites applications, such as high-temperature composites, and weight-saving COPV technologies Establish and maintain high technical standards through specifications and training Setup equipment maintenance plans, and take actions to improve robustness, reliability, and reduce downtime Minimum Qualifications Bachelor's degree in Mechanical Engineering, Chemical Engineering, or related field 5+ years professional experience manufacturing structural aerospace hardware Professional experience managing and growing a team Desire to improve team processes and train other team members Ability to communicate technical challenges, explain rationale and/or resolve concerns Preferred Skills and Experience Master's degree in Mechanical Engineering, Chemical Engineering, or related field 5+ years of demonstrated experience with composites manufacturing for in-space vehicles 2+ years of full lifecycle experience (design, low-rate production, scaled production) with COPV's and COPV liners Demonstrated experience managing both exempt and non-exempt employees within a manufacturing environment Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options , and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan . Impulse Space's spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Job Description Join our dynamic Data Center Engineering Operations Team and become a critical architect of the infrastructure that powers global cloud computing. You'll play a pivotal role in maintaining the heartbeat of Amazon Web Services' physical infrastructure, ensuring seamless operations that support millions of customers worldwide. The Data Center Chief Engineer (CE) is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The CE serves as an expert technical resource reporting to a site's Data Center Facility Manager, interacting with onsite Engineering Operations Technicians (EOT) and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support Amazon within its owned and operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Chief Engineer will be responsible for managing small-to-medium large impact projects from conception to completion. These projects can involve large amounts of independent work as well as collaboration with external support groups including engineering, automation, processing, and finance in both local and global settings. The CE will be tasked with creating and delivering milestones, obtaining and tracking quotes for all necessary costs, and documenting project results for future implementation at other facilities. The goals of such projects are for the CE to drive innovation and resiliency while reducing operational costs in the facilities. The Chief Engineer directs, trains and supports EOT's in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations. Implementation and execution of site/equipment-specific training exercises is also expected. This equipment includes, but is not limited to, stand-by diesel generators, switchgear, UPS's, PDU's, AHU's, chillers, cooling towers, chemical treatment systems, pumps, motors, VFD's, and building automation systems. AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Key job responsibilities Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Operate independently with limited direct management Act as an escalation point for all facilities-related issues within the data center, escalating to the Data Center Facility Manager as needed Perform root cause analysis of equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Create and deploy new standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams Provide training and guidance to Engineering Operations Technicians Ensure all safety procedures are adhered to by vendor and Amazon staff Ensure all security procedures are adhered to by vendor and Amazon staff Utilize internal CMMS to manage building workflows Communicate complex technical information to a non-technical audience Using Microsoft Office suite (Outlook, Excel, PPT, Word) and other computer programs such as PDF, QUIP, and other dashboards and scheduling tooling. Instruct others on scheduling, ticketing, and providing mentorship in developing solutions. Physical Requirements: Walk job sites in uneven terrain Work at heights and from ladders Regularly lift and/or move up to 39 pounds; and participate in group lifts for 40 pounds or more Coordinate body movements when using tools or equipment Reach and stretch to position equipment and fixtures while maintaining balance Bend or twist the body into unusual positions while working Perform physical tasks all day without becoming overly tired Use hands to manipulate small wires and objects Push or pull heavy objects into position Work in a noisy environment Work at depths, such as under raised floors This role supports data centers in various operational stages. The position may be assigned to a facility still under development, which could require travel to established locations for training until your designated site becomes fully operational. Essential Requirements: Ability to travel to or commute between data center locations as needed Willingness to temporarily work at alternative sites during training periods or until assigned facility is operational Travel frequency will vary based on business needs and operational status of assigned facility Candidates must be able to travel (over 50 miles) or commute (less than 50 miles) to active data center sites as required by business needs. BASIC QUALIFICATIONS- Experience reading and writing procedures, technical documents, and engineering drawings - 4+ years of data center experience including industrial electrical and mechanical systems - 4+ years of administrative experience including Microsoft Office products - Experience leading technical teams through daily operations, maintenance evolutions, and complex troubleshooting PREFERRED QUALIFICATIONS- Experience in construction or project management - Can work in an environment that involves walking, stooping, bending, and climbing to access equipment - Associates or higher in engineering field or mechanical or electrical trades - PMP, Lean Six Sigma, or equivalent certifications - Training-lead informal training Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit -we- hire/accommodations for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at USA, GA, Hampton - 111 100.00 USD annually
11/11/2026
Full time
Job Description Join our dynamic Data Center Engineering Operations Team and become a critical architect of the infrastructure that powers global cloud computing. You'll play a pivotal role in maintaining the heartbeat of Amazon Web Services' physical infrastructure, ensuring seamless operations that support millions of customers worldwide. The Data Center Chief Engineer (CE) is responsible for ensuring that all electrical, mechanical, and fire/life safety equipment within the data center is operating at peak efficiency. This involves both planned preventative maintenance of equipment, daily corrective work, and emergency response to emergent issues. The CE serves as an expert technical resource reporting to a site's Data Center Facility Manager, interacting with onsite Engineering Operations Technicians (EOT) and any third-party vendors. They are expected to be a singular focal point for all facility operations within a given data center and to support Amazon within its owned and operated data centers. Data center equipment that supports mission-critical servers must maintain better than 99.999% uptime. Chief Engineer will be responsible for managing small-to-medium large impact projects from conception to completion. These projects can involve large amounts of independent work as well as collaboration with external support groups including engineering, automation, processing, and finance in both local and global settings. The CE will be tasked with creating and delivering milestones, obtaining and tracking quotes for all necessary costs, and documenting project results for future implementation at other facilities. The goals of such projects are for the CE to drive innovation and resiliency while reducing operational costs in the facilities. The Chief Engineer directs, trains and supports EOT's in their role of providing hands-on electrical and mechanical equipment troubleshooting and operations. Implementation and execution of site/equipment-specific training exercises is also expected. This equipment includes, but is not limited to, stand-by diesel generators, switchgear, UPS's, PDU's, AHU's, chillers, cooling towers, chemical treatment systems, pumps, motors, VFD's, and building automation systems. AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. Key job responsibilities Oversee the day-to-day operations and maintenance of mechanical and electrical equipment in a data center. Operate independently with limited direct management Act as an escalation point for all facilities-related issues within the data center, escalating to the Data Center Facility Manager as needed Perform root cause analysis of equipment failures Troubleshoot and report of facility and data sever-level events within internal SLA Create and deploy new standard practices for Engineering Operations Technicians, Chief Engineers, and vendor support teams Provide training and guidance to Engineering Operations Technicians Ensure all safety procedures are adhered to by vendor and Amazon staff Ensure all security procedures are adhered to by vendor and Amazon staff Utilize internal CMMS to manage building workflows Communicate complex technical information to a non-technical audience Using Microsoft Office suite (Outlook, Excel, PPT, Word) and other computer programs such as PDF, QUIP, and other dashboards and scheduling tooling. Instruct others on scheduling, ticketing, and providing mentorship in developing solutions. Physical Requirements: Walk job sites in uneven terrain Work at heights and from ladders Regularly lift and/or move up to 39 pounds; and participate in group lifts for 40 pounds or more Coordinate body movements when using tools or equipment Reach and stretch to position equipment and fixtures while maintaining balance Bend or twist the body into unusual positions while working Perform physical tasks all day without becoming overly tired Use hands to manipulate small wires and objects Push or pull heavy objects into position Work in a noisy environment Work at depths, such as under raised floors This role supports data centers in various operational stages. The position may be assigned to a facility still under development, which could require travel to established locations for training until your designated site becomes fully operational. Essential Requirements: Ability to travel to or commute between data center locations as needed Willingness to temporarily work at alternative sites during training periods or until assigned facility is operational Travel frequency will vary based on business needs and operational status of assigned facility Candidates must be able to travel (over 50 miles) or commute (less than 50 miles) to active data center sites as required by business needs. BASIC QUALIFICATIONS- Experience reading and writing procedures, technical documents, and engineering drawings - 4+ years of data center experience including industrial electrical and mechanical systems - 4+ years of administrative experience including Microsoft Office products - Experience leading technical teams through daily operations, maintenance evolutions, and complex troubleshooting PREFERRED QUALIFICATIONS- Experience in construction or project management - Can work in an environment that involves walking, stooping, bending, and climbing to access equipment - Associates or higher in engineering field or mechanical or electrical trades - PMP, Lean Six Sigma, or equivalent certifications - Training-lead informal training Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit -we- hire/accommodations for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at USA, GA, Hampton - 111 100.00 USD annually
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
11/11/2026
Full time
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
11/11/2026
Full time
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
11/11/2026
Full time
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
Job Description Optomi, in partnership with a premier client in the telecommunications industry, is seeking a User Experience Researcher to support a high-impact initiative focused on modernizing internal operations and dispatch systems. This role will help improve the efficiency and usability of tools used by teams managing network outages, work orders, and field technician coordination. The ideal candidate will leverage both qualitative and quantitative research to inform data-driven and AI-supported solutions that streamline workflows and reduce manual effort. This role is designated as remote; however, interested candidates must be based in Dallas, TX, Chicago, IL or Atlanta, GA to collaborate with local teams as needed. This is long-term contract with likelihood of ongoing extension (and potential for conversion to FTE if willing to go onsite full-time). What You Will Do: Conduct user research to improve internal tools and operational workflows Design and execute mixed-methods research to uncover insights and inefficiencies Analyze qualitative and quantitative data to inform product and operational decisions Partner with Product, Engineering, and Operations teams to align research with business goals Communicate insights clearly to influence design, workflow improvements, and system enhancements The Right Candidate Will Have: 5+ years of UX research experience, ideally in enterprise or complex systems Strong mixed-methods research skills with a data-driven mindset Experience working with internal tools, operations, or workflow-heavy environments is a plus Ability to translate research into actionable insights that drive efficiency and optimization Strong collaboration and communication skills across cross-functional teams Exposure to AI-driven or automation-focused initiatives is a plus Bachelor's degree in a related field (advanced degree preferred) Portfolio demonstrating impact of research on product or system improvements
11/11/2026
Full time
Job Description Optomi, in partnership with a premier client in the telecommunications industry, is seeking a User Experience Researcher to support a high-impact initiative focused on modernizing internal operations and dispatch systems. This role will help improve the efficiency and usability of tools used by teams managing network outages, work orders, and field technician coordination. The ideal candidate will leverage both qualitative and quantitative research to inform data-driven and AI-supported solutions that streamline workflows and reduce manual effort. This role is designated as remote; however, interested candidates must be based in Dallas, TX, Chicago, IL or Atlanta, GA to collaborate with local teams as needed. This is long-term contract with likelihood of ongoing extension (and potential for conversion to FTE if willing to go onsite full-time). What You Will Do: Conduct user research to improve internal tools and operational workflows Design and execute mixed-methods research to uncover insights and inefficiencies Analyze qualitative and quantitative data to inform product and operational decisions Partner with Product, Engineering, and Operations teams to align research with business goals Communicate insights clearly to influence design, workflow improvements, and system enhancements The Right Candidate Will Have: 5+ years of UX research experience, ideally in enterprise or complex systems Strong mixed-methods research skills with a data-driven mindset Experience working with internal tools, operations, or workflow-heavy environments is a plus Ability to translate research into actionable insights that drive efficiency and optimization Strong collaboration and communication skills across cross-functional teams Exposure to AI-driven or automation-focused initiatives is a plus Bachelor's degree in a related field (advanced degree preferred) Portfolio demonstrating impact of research on product or system improvements
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
11/11/2026
Full time
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
11/11/2026
Full time
Job Description Position: Data-Center Technician Location: 100 Gateway Global Drive, Byhalia, MS 38611 Employment Type: Full-Time Work Arrangement: Onsite Start: ASAP Job Summary: Install, maintain, and troubleshoot servers, racks, switches, and hardware. Perform hardware upgrades and replace faulty equipment. Install and manage fiber optic and copper cabling. Support UPS, PDUs, power, and cooling infrastructure. Perform preventive maintenance and respond to technical incidents. Handle Moves, Adds, and Changes (MAC). Maintain equipment inventory, tickets, and technical documentation. Follow data center security and safety procedures. Required Skills: Experience in data center, IT infrastructure, server, or hardware support. Knowledge of servers, networking, and structured cabling. Strong troubleshooting and problem-solving skills. Ability to handle and install IT equipment. Preferred Qualifications: CompTIA A+, Network+, CCNA, or relevant certifications. Experience with ticketing and monitoring tools. Associate's or Bachelor's degree in IT, Computer Science, or a related field.
Job Description Job Description Pay: Weekly & Competitive Pay + Shift Differential + Day 1 Benefits & 401K Shift(s) Available: 1st Shift Monday- Friday 7:00 AM - 3:30 PM Overtime Available We're seeking a detail-driven CMM Quality Inspector to join our growing aerospace manufacturing team. In this role, you'll inspect precision-machined aerospace components using CMMs, vision systems, and manual inspection equipment to ensure compliance with engineering specifications, customer requirements, and industry quality standards. This is an excellent opportunity for someone with quality inspection experience who enjoys problem-solving, working independently, and contributing to a culture built on teamwork, accountability, and continuous improvement. Key Responsibilities CMM & Inspection Activities Set up and operate Coordinate Measuring Machines (CMMs) for in-process, first article, first piece, and final inspections Perform dimensional and visual inspections on machined metal, plastic, and aerospace components Utilize inspection equipment including: CMMs Vision Inspection Systems Micrometers Calipers Height Gauges Gauge Pins Verniers Fixtures and hand gauging equipment Complete close-tolerance inspections using GD&T principles Interpret customer drawings, 3D models, specifications, and engineering documentation Quality Documentation & Reporting Maintain inspection records and quality documentation Complete AS9102 First Article Inspection Reports (FAIRs) as required Document inspection results, nonconformances, and corrective actions Complete production routers, inspection methods sheets, and certification reviews Ensure all documentation is accurate and audit-ready Quality Assurance & Team Collaboration Identify nonconforming products and support root cause investigations Partner with Engineering, Manufacturing, and Quality teams to resolve issues Assist with inspection planning, engineering markups, and inspection strategies Ensure compliance with customer requirements and aerospace quality standards Meet quality and productivity expectations while maintaining attention to detail What You'll Bring Knowledge & Experience: 2+ years of experience in quality inspection, manufacturing inspection, metrology, or CMM inspection Ability to read and interpret blueprints, technical drawings, and specifications Experience using precision measuring instruments Basic understanding of GD&T Strong computer skills and comfort working with inspection software and electronic documentation Excellent attention to detail and organizational skills Strong communication skills with the ability to provide direct, respectful feedback Ability to learn quickly and work independently with minimal supervision Preferred Qualifications Aerospace manufacturing experience AS9100 and/or AS9102 experience Experience as a Quality Inspector, CMM Inspector, DQR, or Metrology Technician CMM programming experience (PC-DMIS, Calypso, or similar software) Experience inspecting complex, tight-tolerance machined components Associate degree or technical training in manufacturing, engineering, quality, or related field CNC machining or manufacturing support experience Process improvement or continuous improvement experience We're looking for someone who: Listens and communicates effectively Balances direct communication with professionalism and compassion Takes notes and learns quickly Picks up new processes with ease Doesn't require micromanagement Stays productive and engaged Supports a positive team culture If you're passionate about CMM inspection, quality control, precision measurement, GD&T, aerospace manufacturing, metrology, and continuous improvement, we encourage you to apply today. Join a team where quality matters, your expertise is valued, and your work helps support critical aerospace programs. Apply now!
11/11/2026
Full time
Job Description Job Description Pay: Weekly & Competitive Pay + Shift Differential + Day 1 Benefits & 401K Shift(s) Available: 1st Shift Monday- Friday 7:00 AM - 3:30 PM Overtime Available We're seeking a detail-driven CMM Quality Inspector to join our growing aerospace manufacturing team. In this role, you'll inspect precision-machined aerospace components using CMMs, vision systems, and manual inspection equipment to ensure compliance with engineering specifications, customer requirements, and industry quality standards. This is an excellent opportunity for someone with quality inspection experience who enjoys problem-solving, working independently, and contributing to a culture built on teamwork, accountability, and continuous improvement. Key Responsibilities CMM & Inspection Activities Set up and operate Coordinate Measuring Machines (CMMs) for in-process, first article, first piece, and final inspections Perform dimensional and visual inspections on machined metal, plastic, and aerospace components Utilize inspection equipment including: CMMs Vision Inspection Systems Micrometers Calipers Height Gauges Gauge Pins Verniers Fixtures and hand gauging equipment Complete close-tolerance inspections using GD&T principles Interpret customer drawings, 3D models, specifications, and engineering documentation Quality Documentation & Reporting Maintain inspection records and quality documentation Complete AS9102 First Article Inspection Reports (FAIRs) as required Document inspection results, nonconformances, and corrective actions Complete production routers, inspection methods sheets, and certification reviews Ensure all documentation is accurate and audit-ready Quality Assurance & Team Collaboration Identify nonconforming products and support root cause investigations Partner with Engineering, Manufacturing, and Quality teams to resolve issues Assist with inspection planning, engineering markups, and inspection strategies Ensure compliance with customer requirements and aerospace quality standards Meet quality and productivity expectations while maintaining attention to detail What You'll Bring Knowledge & Experience: 2+ years of experience in quality inspection, manufacturing inspection, metrology, or CMM inspection Ability to read and interpret blueprints, technical drawings, and specifications Experience using precision measuring instruments Basic understanding of GD&T Strong computer skills and comfort working with inspection software and electronic documentation Excellent attention to detail and organizational skills Strong communication skills with the ability to provide direct, respectful feedback Ability to learn quickly and work independently with minimal supervision Preferred Qualifications Aerospace manufacturing experience AS9100 and/or AS9102 experience Experience as a Quality Inspector, CMM Inspector, DQR, or Metrology Technician CMM programming experience (PC-DMIS, Calypso, or similar software) Experience inspecting complex, tight-tolerance machined components Associate degree or technical training in manufacturing, engineering, quality, or related field CNC machining or manufacturing support experience Process improvement or continuous improvement experience We're looking for someone who: Listens and communicates effectively Balances direct communication with professionalism and compassion Takes notes and learns quickly Picks up new processes with ease Doesn't require micromanagement Stays productive and engaged Supports a positive team culture If you're passionate about CMM inspection, quality control, precision measurement, GD&T, aerospace manufacturing, metrology, and continuous improvement, we encourage you to apply today. Join a team where quality matters, your expertise is valued, and your work helps support critical aerospace programs. Apply now!
Job Description Job Description Job Title: Systems Engineer Test Technician Location: Acton Massachusetts 01720 Job Description: Position Overview: The successful candidate will be responsible for supporting and managing materials, tools, and performing various engineering tasks across R&D, supporting existing products and new product initiatives. The general scope includes working with a highly motivated team of dedicated test technicians and experienced engineers in managing R&D materials and assets for ad-hoc or V&V testing purposes (manual and automated), setting up test environments, executing testing, reporting test results, building device prototypes, and maintaining laboratory equipment. The primary objective of this position will be ensuring smooth operation and preparation of mission-critical materials supply and testing to promote robust medical device design, development, and evaluations. Responsibilities: Coordinate with systems, development, and test engineers to understand schedules and equipment needsneed to support project testing activities. Create, build, and set up test fixtures and Building and setting up lab equipment for testing. Ensure proper equipment is ready on time for test execution across projects. Leverage existing tools and automation to execute automated tests and report results across projects and test cycles. Support basic troubleshooting and collecting logs and data for issues observed during testing. Execute manual and automated tests, record results, and document issues using standard tools and processes during project development cycles. Execute dry runs of new and updated manual and automated Test Cases. Support Test Method Validation (TMV), and Measurement System Analysis activities, including Gage R&R studies, documenting and analyzing data. Coordinate with Systems, development, and test engineers when troubleshooting issues and verifying fixes. Write reports and log issues for executed verification tests. Participate in the planning and execution of technical project work. Participate and Support 5S, Ensure lab safety and housekeeping practices. Performs technician tasks deploying standard and advanced techniques. Maintain laboratory equipment by scheduling regular maintenance, interfacing with facilities, service technicians, and responding to equipment issues. Performs other duties as required. Education and Experience: Minimum Requirements: High school diploma or GED 3 yrs experience working in a laboratory environment (preferably in R&D) or a combination of higher-level education 2 yrs experience using Microsoft Office suite (Word, Excel) & technical writing capabilities Preferred Skills and Competencies: Associate degree in an engineering or technical-related field Self-driven, efficient learner and able to perform in a dynamic work environment Equipment Maintenance Planning, organization & detailed oriented Knowledge of scripting and/or programming languages like Python is a plus. Knowledge of Android or iOS technology is a plus. Knowledge of SCM tools (Git, Bitbucket) and CI tools (Jenkins, Bamboo) is a plus. Experience with CAD software (SolidWorks preferred) is a plus. Experience with rapid prototyping tools including 3D printing is a plus. Knowledge of Measurement System Analysis (MSA), including Gage R&R studies. Previous experience working in the Medical Device industry (FDA/ISO regulated) is a plus. Good written and verbal communication skills Physical Requirements (if applicable): Must be able to lift up to 20lbs regularly Must be able to lift up to 50lbs infrequently Must be able to reach overhead Sitting or standing for periods of time Occasionally be able to work on weekends as needed to support projects
11/11/2026
Full time
Job Description Job Description Job Title: Systems Engineer Test Technician Location: Acton Massachusetts 01720 Job Description: Position Overview: The successful candidate will be responsible for supporting and managing materials, tools, and performing various engineering tasks across R&D, supporting existing products and new product initiatives. The general scope includes working with a highly motivated team of dedicated test technicians and experienced engineers in managing R&D materials and assets for ad-hoc or V&V testing purposes (manual and automated), setting up test environments, executing testing, reporting test results, building device prototypes, and maintaining laboratory equipment. The primary objective of this position will be ensuring smooth operation and preparation of mission-critical materials supply and testing to promote robust medical device design, development, and evaluations. Responsibilities: Coordinate with systems, development, and test engineers to understand schedules and equipment needsneed to support project testing activities. Create, build, and set up test fixtures and Building and setting up lab equipment for testing. Ensure proper equipment is ready on time for test execution across projects. Leverage existing tools and automation to execute automated tests and report results across projects and test cycles. Support basic troubleshooting and collecting logs and data for issues observed during testing. Execute manual and automated tests, record results, and document issues using standard tools and processes during project development cycles. Execute dry runs of new and updated manual and automated Test Cases. Support Test Method Validation (TMV), and Measurement System Analysis activities, including Gage R&R studies, documenting and analyzing data. Coordinate with Systems, development, and test engineers when troubleshooting issues and verifying fixes. Write reports and log issues for executed verification tests. Participate in the planning and execution of technical project work. Participate and Support 5S, Ensure lab safety and housekeeping practices. Performs technician tasks deploying standard and advanced techniques. Maintain laboratory equipment by scheduling regular maintenance, interfacing with facilities, service technicians, and responding to equipment issues. Performs other duties as required. Education and Experience: Minimum Requirements: High school diploma or GED 3 yrs experience working in a laboratory environment (preferably in R&D) or a combination of higher-level education 2 yrs experience using Microsoft Office suite (Word, Excel) & technical writing capabilities Preferred Skills and Competencies: Associate degree in an engineering or technical-related field Self-driven, efficient learner and able to perform in a dynamic work environment Equipment Maintenance Planning, organization & detailed oriented Knowledge of scripting and/or programming languages like Python is a plus. Knowledge of Android or iOS technology is a plus. Knowledge of SCM tools (Git, Bitbucket) and CI tools (Jenkins, Bamboo) is a plus. Experience with CAD software (SolidWorks preferred) is a plus. Experience with rapid prototyping tools including 3D printing is a plus. Knowledge of Measurement System Analysis (MSA), including Gage R&R studies. Previous experience working in the Medical Device industry (FDA/ISO regulated) is a plus. Good written and verbal communication skills Physical Requirements (if applicable): Must be able to lift up to 20lbs regularly Must be able to lift up to 50lbs infrequently Must be able to reach overhead Sitting or standing for periods of time Occasionally be able to work on weekends as needed to support projects
Job Description Job Description Cascade Engineering Technologies- CMM Programmer Pay: $70,000-$85,000 per year Company Overview: Cascade Engineering Technologies is a leading aerospace company dedicated to pushing the boundaries of innovation in aerospace manufacturing, and technology. We specialize in metrology-based machining of Ti and Inconel based castings, Inconel forgings and aluminum plate serving both commercial and defense sectors globally. With a commitment to excellence and safety, we are seeking a highly skilled Engineer Technician to join our team and uphold the highest standards of quality assurance in all our operations. Job Overview: We are seeking a highly skilled CMM Programmer to develop, maintain, and execute inspection programs that ensure aerospace products meet customer and regulatory requirements. This position plays a critical role in supporting quality assurance, first article inspections, process validation, and continuous improvement initiatives. Key Responsibilities: Develop, validate, and maintain CMM inspection programs for aerospace components using customer engineering drawings and specifications. Program and operate Coordinate Measuring Machines (CMMs) to inspect complex machined parts. Interpret engineering drawings, GD&T, customer specifications, and inspection requirements. Perform First Article Inspections (FAIs) in accordance with AS9102 requirements. Analyze inspection results and communicate findings to Quality, Engineering, and Manufacturing teams. Troubleshoot and optimize existing CMM programs to improve efficiency and accuracy. Utilize precision measuring equipment including micrometers, calipers, height gages, pin gages, depth gages, optical comparators, and inspection fixtures. Verify supplier certifications and supporting documentation for compliance with engineering requirements. Support root cause investigations and corrective action activities. Document inspection results and maintain quality records using Microsoft Office and company software systems. Assist with continuous improvement initiatives related to quality and inspection processes. Perform other duties as assigned. Requirements High School Diploma or GED required. Associate degree in Manufacturing, Quality, Engineering Technology, or related field preferred. Minimum of 3 years of CMM programming experience in a manufacturing environment; aerospace experience preferred. Experience with CMM software such as PC-DMIS, Calypso, MCOSMOS, or equivalent. Experience programming and operating Coordinate Measuring Machines (CMMs). Strong understanding of GD&T (ASME Y14.5). Ability to read and interpret engineering drawings, blueprints, and specifications. Experience performing AS9102 First Article Inspections preferred. Knowledge of AS9100 quality management systems preferred. Experience with Zeiss, Mitutoyo, Brown & Sharpe, Hexagon, or similar CMM equipment preferred. Experience supporting machining operations involving 3-, 4-, and 5-axis CNC machining preferred. Proficiency with Microsoft Office applications. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Highly organized and detail-oriented. Benefits Competitive compensation based on experience. Quarterly bonus opportunity. Medical, Dental, and Vision Insurance. Company-paid Life and Disability Insurance. 401(k) with Company Match. Paid Time Off and Paid Holidays.
11/11/2026
Full time
Job Description Job Description Cascade Engineering Technologies- CMM Programmer Pay: $70,000-$85,000 per year Company Overview: Cascade Engineering Technologies is a leading aerospace company dedicated to pushing the boundaries of innovation in aerospace manufacturing, and technology. We specialize in metrology-based machining of Ti and Inconel based castings, Inconel forgings and aluminum plate serving both commercial and defense sectors globally. With a commitment to excellence and safety, we are seeking a highly skilled Engineer Technician to join our team and uphold the highest standards of quality assurance in all our operations. Job Overview: We are seeking a highly skilled CMM Programmer to develop, maintain, and execute inspection programs that ensure aerospace products meet customer and regulatory requirements. This position plays a critical role in supporting quality assurance, first article inspections, process validation, and continuous improvement initiatives. Key Responsibilities: Develop, validate, and maintain CMM inspection programs for aerospace components using customer engineering drawings and specifications. Program and operate Coordinate Measuring Machines (CMMs) to inspect complex machined parts. Interpret engineering drawings, GD&T, customer specifications, and inspection requirements. Perform First Article Inspections (FAIs) in accordance with AS9102 requirements. Analyze inspection results and communicate findings to Quality, Engineering, and Manufacturing teams. Troubleshoot and optimize existing CMM programs to improve efficiency and accuracy. Utilize precision measuring equipment including micrometers, calipers, height gages, pin gages, depth gages, optical comparators, and inspection fixtures. Verify supplier certifications and supporting documentation for compliance with engineering requirements. Support root cause investigations and corrective action activities. Document inspection results and maintain quality records using Microsoft Office and company software systems. Assist with continuous improvement initiatives related to quality and inspection processes. Perform other duties as assigned. Requirements High School Diploma or GED required. Associate degree in Manufacturing, Quality, Engineering Technology, or related field preferred. Minimum of 3 years of CMM programming experience in a manufacturing environment; aerospace experience preferred. Experience with CMM software such as PC-DMIS, Calypso, MCOSMOS, or equivalent. Experience programming and operating Coordinate Measuring Machines (CMMs). Strong understanding of GD&T (ASME Y14.5). Ability to read and interpret engineering drawings, blueprints, and specifications. Experience performing AS9102 First Article Inspections preferred. Knowledge of AS9100 quality management systems preferred. Experience with Zeiss, Mitutoyo, Brown & Sharpe, Hexagon, or similar CMM equipment preferred. Experience supporting machining operations involving 3-, 4-, and 5-axis CNC machining preferred. Proficiency with Microsoft Office applications. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Highly organized and detail-oriented. Benefits Competitive compensation based on experience. Quarterly bonus opportunity. Medical, Dental, and Vision Insurance. Company-paid Life and Disability Insurance. 401(k) with Company Match. Paid Time Off and Paid Holidays.
Job Description Job Description Job Title: Zeiss CMM Programmer Department: Production Methods Machine Tools was established in 1958 with three employees and a handful of refurbished machines. Since then, the company has become one of the largest privately owned machine tool importers in North America. Job Summary: The Zeiss CMM Programmer is responsible for developing, validating, and optimizing Coordinate Measuring Machine (CMM) inspection programs utilizing Zeiss Calypso software. This position supports customers and internal teams by providing metrology expertise, inspection programming, process validation, training, and technical support related to CNC machining and quality control applications. The ideal candidate possesses strong GD&T knowledge, experience with precision measurement, and the ability to collaborate with customers to improve manufacturing quality and efficiency. Key Responsibilities Develop, test, and optimize CMM inspection programs using Zeiss Calypso software. Program and operate Zeiss CMM equipment for dimensional verification of machined components. Interpret engineering drawings, CAD models, specifications, and GD&T requirements. Conduct first article inspections (FAI), process capability studies, and measurement system analyses. Support machine tool sales efforts by demonstrating metrology solutions and providing technical expertise during customer evaluations. Install, configure, and validate CMM systems at customer facilities. Provide troubleshooting and technical support for measurement programs and inspection processes. Generate detailed inspection reports and communicate measurement results to customers and internal stakeholders. Collaborate with application engineers, sales representatives, and service technicians to ensure successful project implementation. Assist customers with quality improvement initiatives and measurement process optimization. Maintain awareness of emerging metrology technologies, software enhancements, and industry best practices. Incoming inspection of outsourced parts/components Required Qualifications & Skills: Associate degree or technical certification in Engineering Technology, Manufacturing, Metrology, Quality Assurance, or related field; equivalent experience considered. Minimum 3 years of experience programming and operating Zeiss CMM equipment. Proficiency with Zeiss Calypso software. Strong understanding of GD&T and blueprint interpretation. Experience inspecting precision machined components. Knowledge of manufacturing processes including CNC milling, turning, grinding, and related machining operations. Ability to troubleshoot measurement and inspection issues independently. Excellent communication and customer service skills. Proficiency with Microsoft Office applications. Supervisory Responsibilities: None Travel Requirements: Between Acton and Sudbury locations with occasional travel to other Methods locations Physical Requirements: Prolonged periods of desk/computer work. Ability to walk manufacturing floors and assess operations. Occasional lifting of up to 25 lbs. Adherence to PPE and safety protocols required on shop floors. Salary: $89, 772.64 - $112,215.26 The listed salary range represents our good faith estimate for this position. Final compensation will be determined based on a candidate's experience, skills, and qualifications, and may exceed the posted range for highly qualified candidates. Additional Information This job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. In instances where educational degrees are required, the company will take into consideration factors such as additional experience, training, or certifications in lieu of specific educational requirements . Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.
11/11/2026
Full time
Job Description Job Description Job Title: Zeiss CMM Programmer Department: Production Methods Machine Tools was established in 1958 with three employees and a handful of refurbished machines. Since then, the company has become one of the largest privately owned machine tool importers in North America. Job Summary: The Zeiss CMM Programmer is responsible for developing, validating, and optimizing Coordinate Measuring Machine (CMM) inspection programs utilizing Zeiss Calypso software. This position supports customers and internal teams by providing metrology expertise, inspection programming, process validation, training, and technical support related to CNC machining and quality control applications. The ideal candidate possesses strong GD&T knowledge, experience with precision measurement, and the ability to collaborate with customers to improve manufacturing quality and efficiency. Key Responsibilities Develop, test, and optimize CMM inspection programs using Zeiss Calypso software. Program and operate Zeiss CMM equipment for dimensional verification of machined components. Interpret engineering drawings, CAD models, specifications, and GD&T requirements. Conduct first article inspections (FAI), process capability studies, and measurement system analyses. Support machine tool sales efforts by demonstrating metrology solutions and providing technical expertise during customer evaluations. Install, configure, and validate CMM systems at customer facilities. Provide troubleshooting and technical support for measurement programs and inspection processes. Generate detailed inspection reports and communicate measurement results to customers and internal stakeholders. Collaborate with application engineers, sales representatives, and service technicians to ensure successful project implementation. Assist customers with quality improvement initiatives and measurement process optimization. Maintain awareness of emerging metrology technologies, software enhancements, and industry best practices. Incoming inspection of outsourced parts/components Required Qualifications & Skills: Associate degree or technical certification in Engineering Technology, Manufacturing, Metrology, Quality Assurance, or related field; equivalent experience considered. Minimum 3 years of experience programming and operating Zeiss CMM equipment. Proficiency with Zeiss Calypso software. Strong understanding of GD&T and blueprint interpretation. Experience inspecting precision machined components. Knowledge of manufacturing processes including CNC milling, turning, grinding, and related machining operations. Ability to troubleshoot measurement and inspection issues independently. Excellent communication and customer service skills. Proficiency with Microsoft Office applications. Supervisory Responsibilities: None Travel Requirements: Between Acton and Sudbury locations with occasional travel to other Methods locations Physical Requirements: Prolonged periods of desk/computer work. Ability to walk manufacturing floors and assess operations. Occasional lifting of up to 25 lbs. Adherence to PPE and safety protocols required on shop floors. Salary: $89, 772.64 - $112,215.26 The listed salary range represents our good faith estimate for this position. Final compensation will be determined based on a candidate's experience, skills, and qualifications, and may exceed the posted range for highly qualified candidates. Additional Information This job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. In instances where educational degrees are required, the company will take into consideration factors such as additional experience, training, or certifications in lieu of specific educational requirements . Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.
Job Description Job Description Why consider a career with Snowline Engineering? Snowline Engineering is a state-of-the-art precision machining facility located in the beautiful foothills of the Sierra Nevada just 20 minutes outside of Sacramento. Our company's objective is to provide our customers with diversity in precision machining, precision sheet metal, light to medium fabrication, and turnkey assemblies. We have been in business since 1966 and have a very diverse customer base including customers from the Aerospace, Robotics, Medical and Train industries. Our 80,000 square foot facility features the most state of the art equipment in the industry. We offer in-house training and opportunity for advancement. If you want to work for a company that values excellence and surround yourself with a talented team of professionals, we look forward to receiving your resume! Position: CMM Programmer Status: Full Time Hours: Monday - Friday 6:00am - 2:30pm Our Compensation and Benefits show how much we value our team! $35.00 to $48.00 per hour, depending on experience Medical, Dental and Vision Insurance with high company contribution Long Term Disability and Life Insurance Plans 401K plan with Company Match Generous Paid Vacation and Sick Time Paid Holidays General Description: Responsible for developing, writing, and validating Coordinate Measuring Machine (CMM) inspection programs used to inspect manufactured precision machined products. Creates and optimizes measurement routines from engineering drawings, CAD models, and GD&T requirements to support First Article, In-Process, and Final Inspection. Operates the CMM and additional precision monitoring and measuring instruments as a member of the Quality Control team. Communicate well with others and properly document and report out of tolerance items immediately. Accurately maintain paperwork, computer logs and other required documentation on a consistent basis. RESPONSIBILITIES: Develops, writes, and debugs CMM inspection programs from engineering drawings, CAD models, and GD&T requirements Establishes part alignments, datums, and measurement strategies to ensure accurate and repeatable results Validates and optimizes new programs through trial runs and correlation studies before release to production Operates the CMM to perform First Article, In-Process, and Final Inspection Selects and builds fixturing and stylus configurations appropriate to each part Maintains and organizes the CMM program library and revision control Interprets GD&T and engineering specifications to determine inspection requirements Generates inspection reports and properly documents out-of-tolerance conditions Supports First Article Inspection (FAI) and AS9100 documentation requirements Works with Manufacturing and Engineering to resolve dimensional and quality concerns Trains operators on the proper running of established CMM programs Performs inspection using calipers, micrometers, and other precision measuring instruments as needed Maintains the CMM and measuring equipment in calibrated, good working order Keep work space clean and orderly All Quality Assurance Technician duties as required Other duties as assigned by management QUALIFICATIONS: 3-5 plus years of CMM programming and inspection experience in a precision machining environment High school diploma or GED; technical certificate or some college in a related field preferred Proficient programming CMMs using industry-standard metrology software (offline programming a plus) Strong working knowledge of GD&T (ASME Y14.5) and the ability to interpret complex engineering drawings and CAD models Familiarity with the operation of the following equipment: calipers, micrometers, CMM, blade mics, hole mic, inside-depth mics, flange, thread, gland, multi anvil mics, dial bore gauges, indicators, height gauge, V-blocks, 123 blocks, sine bars, squares, protractor, pin gauges, tooling balls, deltronics pins, and radius gauges Experience with MS Word and MS Excel Written and oral communication skills Excellent math skills Professional work attitude Problem solving and critical thinking skills NO CALLS FROM STAFFING AGENCIES OR RECRUITERS PLEASE Powered by JazzHR NHSVIYeMwe
11/11/2026
Full time
Job Description Job Description Why consider a career with Snowline Engineering? Snowline Engineering is a state-of-the-art precision machining facility located in the beautiful foothills of the Sierra Nevada just 20 minutes outside of Sacramento. Our company's objective is to provide our customers with diversity in precision machining, precision sheet metal, light to medium fabrication, and turnkey assemblies. We have been in business since 1966 and have a very diverse customer base including customers from the Aerospace, Robotics, Medical and Train industries. Our 80,000 square foot facility features the most state of the art equipment in the industry. We offer in-house training and opportunity for advancement. If you want to work for a company that values excellence and surround yourself with a talented team of professionals, we look forward to receiving your resume! Position: CMM Programmer Status: Full Time Hours: Monday - Friday 6:00am - 2:30pm Our Compensation and Benefits show how much we value our team! $35.00 to $48.00 per hour, depending on experience Medical, Dental and Vision Insurance with high company contribution Long Term Disability and Life Insurance Plans 401K plan with Company Match Generous Paid Vacation and Sick Time Paid Holidays General Description: Responsible for developing, writing, and validating Coordinate Measuring Machine (CMM) inspection programs used to inspect manufactured precision machined products. Creates and optimizes measurement routines from engineering drawings, CAD models, and GD&T requirements to support First Article, In-Process, and Final Inspection. Operates the CMM and additional precision monitoring and measuring instruments as a member of the Quality Control team. Communicate well with others and properly document and report out of tolerance items immediately. Accurately maintain paperwork, computer logs and other required documentation on a consistent basis. RESPONSIBILITIES: Develops, writes, and debugs CMM inspection programs from engineering drawings, CAD models, and GD&T requirements Establishes part alignments, datums, and measurement strategies to ensure accurate and repeatable results Validates and optimizes new programs through trial runs and correlation studies before release to production Operates the CMM to perform First Article, In-Process, and Final Inspection Selects and builds fixturing and stylus configurations appropriate to each part Maintains and organizes the CMM program library and revision control Interprets GD&T and engineering specifications to determine inspection requirements Generates inspection reports and properly documents out-of-tolerance conditions Supports First Article Inspection (FAI) and AS9100 documentation requirements Works with Manufacturing and Engineering to resolve dimensional and quality concerns Trains operators on the proper running of established CMM programs Performs inspection using calipers, micrometers, and other precision measuring instruments as needed Maintains the CMM and measuring equipment in calibrated, good working order Keep work space clean and orderly All Quality Assurance Technician duties as required Other duties as assigned by management QUALIFICATIONS: 3-5 plus years of CMM programming and inspection experience in a precision machining environment High school diploma or GED; technical certificate or some college in a related field preferred Proficient programming CMMs using industry-standard metrology software (offline programming a plus) Strong working knowledge of GD&T (ASME Y14.5) and the ability to interpret complex engineering drawings and CAD models Familiarity with the operation of the following equipment: calipers, micrometers, CMM, blade mics, hole mic, inside-depth mics, flange, thread, gland, multi anvil mics, dial bore gauges, indicators, height gauge, V-blocks, 123 blocks, sine bars, squares, protractor, pin gauges, tooling balls, deltronics pins, and radius gauges Experience with MS Word and MS Excel Written and oral communication skills Excellent math skills Professional work attitude Problem solving and critical thinking skills NO CALLS FROM STAFFING AGENCIES OR RECRUITERS PLEASE Powered by JazzHR NHSVIYeMwe
Job Description Job Description Description: We are open to candidates located all throughout Virginia and Northeast North Carolina - looking for 2 or 3 candidates now and another 2 or 3 in the next 6 to 12 months as workload increases. Instrumentation & Controls Quality Assurance/Quality Controls Specialist (Mechanical) Role and Responsibilities: Survey and audit Instrument and Control sensors and devices in a construction environment. Diagnose and repair complex control system malfunctions requiring extensive knowledge of a variety of digital control systems. Troubleshoot and repair control hardware, including controllers, relays, measurement devices, actuators, etc. Review operating equipment data for efficiency improvements and have the ability to communicate the data professionally to a group. Review quality control of hardware installation for new construction and retrofits. Provide controls audit scope and review processes for improvement. Provide technical controls training and support to all data center operations staff. Collaborate with the global automation and optimization team to implement initiatives at the data center. Communicate all issues and upcoming audit work with construction contractors. Other duties as required to support the operation of customer data centers. Travel of sixty percent or more is required. Requirements: Minimum Qualifications: 3+ years of controls experience in central plants, air handling units, and evaporative cooling/humidification systems sensor and instrumentation. Working knowledge of mechanical and life safety systems associated with critical environments. Experience interpreting and auditing blueprints/CAD drawings and control diagrams. Communication and organizational skills. Preferred Qualifications: Experience in data centers or other critical environments is a plus. AS/BS degree in engineering/technical studies, military technical school, or equivalent work experience is a plus. DDC/PLC experience. Experience with common software programming languages: Python, PHP, SQL. Experience beyond field technician level - project management, project engineering, and operations management. Safety It is SCI's policy to require safe operations and practices from all employees and to ensure a safe working environment. Approved Class B hard hat in required areas and locations Non-conductive PPE in required areas and locations Steel-toed shoes Insulated and protector gloves (job task-specific) Eye protection Hearing protection protective clothing (job task-specific) Environment Possible exposure to hot and cold climates Occasionally may have to work in dirty environments Able to work in confined spaces and at heights Travel Travel is primarily out of the area, overnight, and global (at least 60% of the time). Physical Requirements Ability to lift, carry, and transport equipment weighing up to 50 lbs. Bending/squatting/kneeling/stooping/crouching/walking 8 or more hours daily. Able to work in multiple environments, such as office, industrial, or shipboard locations in cold, hot, or humid conditions, around moving equipment with the potential for producing high noise levels. Must be able to work at heights and in confined spaces with appropriate PPE Must be able to pass a pre-employment drug screening, background check, and basic skills knowledge tests. Must have or be able to obtain a passport. Must have a valid driver's license and reliable transportation. Must be available to travel 60% or more and willing to work overtime, weekends, and holidays if necessary to meet project commitments. AAP/EEO Statement Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. $32.00 to $38.00 per hour, DOE. Wages in the Candidate's region will be taken into consideration for final offers.
11/11/2026
Full time
Job Description Job Description Description: We are open to candidates located all throughout Virginia and Northeast North Carolina - looking for 2 or 3 candidates now and another 2 or 3 in the next 6 to 12 months as workload increases. Instrumentation & Controls Quality Assurance/Quality Controls Specialist (Mechanical) Role and Responsibilities: Survey and audit Instrument and Control sensors and devices in a construction environment. Diagnose and repair complex control system malfunctions requiring extensive knowledge of a variety of digital control systems. Troubleshoot and repair control hardware, including controllers, relays, measurement devices, actuators, etc. Review operating equipment data for efficiency improvements and have the ability to communicate the data professionally to a group. Review quality control of hardware installation for new construction and retrofits. Provide controls audit scope and review processes for improvement. Provide technical controls training and support to all data center operations staff. Collaborate with the global automation and optimization team to implement initiatives at the data center. Communicate all issues and upcoming audit work with construction contractors. Other duties as required to support the operation of customer data centers. Travel of sixty percent or more is required. Requirements: Minimum Qualifications: 3+ years of controls experience in central plants, air handling units, and evaporative cooling/humidification systems sensor and instrumentation. Working knowledge of mechanical and life safety systems associated with critical environments. Experience interpreting and auditing blueprints/CAD drawings and control diagrams. Communication and organizational skills. Preferred Qualifications: Experience in data centers or other critical environments is a plus. AS/BS degree in engineering/technical studies, military technical school, or equivalent work experience is a plus. DDC/PLC experience. Experience with common software programming languages: Python, PHP, SQL. Experience beyond field technician level - project management, project engineering, and operations management. Safety It is SCI's policy to require safe operations and practices from all employees and to ensure a safe working environment. Approved Class B hard hat in required areas and locations Non-conductive PPE in required areas and locations Steel-toed shoes Insulated and protector gloves (job task-specific) Eye protection Hearing protection protective clothing (job task-specific) Environment Possible exposure to hot and cold climates Occasionally may have to work in dirty environments Able to work in confined spaces and at heights Travel Travel is primarily out of the area, overnight, and global (at least 60% of the time). Physical Requirements Ability to lift, carry, and transport equipment weighing up to 50 lbs. Bending/squatting/kneeling/stooping/crouching/walking 8 or more hours daily. Able to work in multiple environments, such as office, industrial, or shipboard locations in cold, hot, or humid conditions, around moving equipment with the potential for producing high noise levels. Must be able to work at heights and in confined spaces with appropriate PPE Must be able to pass a pre-employment drug screening, background check, and basic skills knowledge tests. Must have or be able to obtain a passport. Must have a valid driver's license and reliable transportation. Must be available to travel 60% or more and willing to work overtime, weekends, and holidays if necessary to meet project commitments. AAP/EEO Statement Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. $32.00 to $38.00 per hour, DOE. Wages in the Candidate's region will be taken into consideration for final offers.
