SCEYE INC
Moriarty, New Mexico
Job Description Job Description Mission Operations Specialist - Ground Systems Status: Full Time, Exempt Location: Moriarty, NM Reports to: Senior Ground Systems Integrator Who Are We: Sceye is a high-growth technology company, building the next generation of instant communications, imaging, and remote sensing infrastructure through stratospheric platforms. Our lighter-than-air high-altitude platform systems (LTA HAPS) are capable of maintaining position over an operational area in the stratosphere (altitudes of 18 - 21km). They can carry multiple telecommunications, imaging, and remote sensing payloads, providing unique functionality, cost, environmental and societal advantages. Our customers & partners include some of the largest global telecommunications companies, infrastructure operators, climate researchers, civil and defense agencies. At Sceye, we aim high, and we want you to join us at the stratospheric edge of innovation. As part of our mission-driven team, you will contribute to building breakthrough technologies that are changing the way we connect and observe the world. We are looking for individuals who bring not only deep expertise but also bold vision and an unwavering commitment to excellence. About the Position: Sceye is seeking a Mission Operations Specialist - Ground Systems to deploy, integrate, configure, verify, operate, troubleshoot, and sustain mission-critical ground systems used for HAPS testing and global operations. The role provides primary technical depth in fielded ground system capability while maintaining secondary qualification in mission execution, test support, mission readiness, and operational surge activities. This is a junior, hands-on role spanning Linux-based computers, operator workstations, networks, mission applications, telemetry interfaces, RF equipment, data logging, time synchronization, storage, power, cabling, and deployable field hardware. The Specialist executes approved architectures and baselines, supports integration and readiness activities, and coordinates complex issues with the Senior Ground Systems Integrator, Ground Systems Engineer, Software, Enterprise IT, and Mission Operations. The role does not independently establish architecture or approve engineering design changes. What You Will Do: The Mission Operations Specialist - Ground Systems position will be a multi-functional role. We are looking for a positive, highly motivated professional with a strong work ethic, a collaborative and open-minded approach, and the humility and drive to work hard, continuously learn, and contribute beyond their primary area of expertise wherever the mission requires. Ground System Deployment and Integration Assist with assembly, configuration, integration, checkout, packing, deployment, installation, teardown, and redeployment of approved Ground Control Station configurations Integrate servers, Linux workstations, network devices, storage, RF and telemetry interfaces, Operator displays, communications equipment, power distribution, UPS equipment, cabling, and supporting field hardware Replicate approved ground system baselines for additional HAPS, missions, sites, training environments, and test configurations Configuration, Verification, and Acceptance Apply approved configurations to Linux systems, network devices, Operator stations, remote nodes, mission applications, and supporting infrastructure Assist with integration, checkout, acceptance, regression, and operational-readiness procedures Verify telemetry flow, network connectivity, communications, time synchronization, logging, storage, user access, remote connectivity, and Operator functionality Collect and organize logs, screenshots, test results, configuration data, and other objective evidence required for acceptance and troubleshooting Maintain inventories, equipment assignments, network diagrams, cable maps, build records, software and hardware versions, and deployment records Troubleshooting and Sustainment Assist with intermediate troubleshooting of ground system hardware, Linux services, networking, mission applications, data interfaces, telemetry, RF equipment, and Operator workstations Systematically isolate faults to equipment, service, interface, configuration, network path, power source, or external dependency Reproduce reported problems in integration or test environments when practical and document symptoms, actions, results, workarounds, and final resolution Coordinate complex software, automation, architectural, cybersecurity, or design issues with the responsible technical authority Perform preventive maintenance, spares management, lifecycle support, and readiness restoration for fielded systems Operational Readiness and Mission Support Assist with ground system readiness checks before simulations, tests, deployments, and live missions Verify availability and configuration of required hardware, software, networks, communications, documentation, tools, spares, and support equipment Provide ground system support during mission setup, checkout, shift turnover, live operations, maintenance, and recovery from outages Perform HAPS Operator or other assigned Mission Operations duties when qualified, current, and designated Support remote sites and distributed operations while maintaining escalation paths to centralized technical and operational authorities Standardization, Training, and Improvement Create and maintain installation instructions, configuration guides, checkout procedures, troubleshooting references, deployment checklists, and sustainment records Standardize labeling, cabling, equipment layouts, packing, inventories, readiness evidence, and field practices across sites Support scripted tests, automation, validation tooling, and data collection with the Ground Systems Engineer What We Are Looking For: Knowledge, Skills, and Abilities Advanced hands-on ability with Linux systems, Ethernet networking, IP addressing, managed switches, remote access, cabling, racks, field hardware, and systematic troubleshooting Ability to integrate and sustain mission-critical systems using approved designs, configuration baselines, and technical procedures Working knowledge of telemetry, RF communications, logging, data storage, time synchronization, operator workstations, and distributed-system dependencies Ability to distinguish authorized configuration work from changes requiring technical-authority or configuration-control approval Strong technical-writing and documentation skills for diagrams, build records, troubleshooting notes, checklists, and acceptance evidence Ability to work safely around electrical equipment, racks, antennas, power distribution, UPS systems, fiber, copper cabling, and field enclosures Ability to coordinate effectively across Mission Operations, Software, Enterprise IT, Safety, and external site personnel Ability to lead small integration and deployment efforts while remaining hands-on Strong attention to detail when handling safety-critical content, records, and controlled documents Ability to learn unfamiliar HAPS systems, mission software, communications systems, procedures, and operational concepts Required Qualifications: Four or more years of experience assembling, configuring, integrating, operating, maintaining, or troubleshooting technical systems in aviation, aerospace, telecommunications, field service, IT, defense, or mission-critical operations Demonstrated experience with Linux-based systems and command-line environments Working knowledge of Ethernet networking, IP addressing, cabling, switches, and connectivity troubleshooting Experience with Bash, Python, Git, containers, virtualization, infrastructure automation, or configuration-management tools Experience executing technical procedures, integration tests, acceptance checks, or system-readiness activities Experience maintaining configuration records, equipment inventories, diagrams, build records, or comparable technical documentation Ability to lift, move, install, and safely work around deployable technical equipment consistent with applicable workplace requirements Ability to travel and work nonstandard schedules during deployments, tests, and live missions Ability to work in a safety-focused and procedurally disciplined operational environment Preferred Qualifications: Associate or Bachelor's degree in Information Technology, electronics, networking, aviation technology, engineering technology, or a related field, or equivalent advanced hands-on experience Experience supporting ground control systems, UAV operations, aerospace testing, telemetry networks, or mission-control environments Familiarity with VLANs, firewalls, VPNs, managed switches, remote access, and cybersecurity-controlled environments Experience with RF communications, software-defined radios, antennas, telemetry, precision timing, or radio-network equipment Experience with equipment racks, power distribution, UPS systems, fiber, copper cabling, environmental controls, and deployable enclosures Prior military, aviation, telecommunications, field-service, or remote-site operations experience What We Offer: At Sceye . click apply for full job details
Job Description Job Description Mission Operations Specialist - Ground Systems Status: Full Time, Exempt Location: Moriarty, NM Reports to: Senior Ground Systems Integrator Who Are We: Sceye is a high-growth technology company, building the next generation of instant communications, imaging, and remote sensing infrastructure through stratospheric platforms. Our lighter-than-air high-altitude platform systems (LTA HAPS) are capable of maintaining position over an operational area in the stratosphere (altitudes of 18 - 21km). They can carry multiple telecommunications, imaging, and remote sensing payloads, providing unique functionality, cost, environmental and societal advantages. Our customers & partners include some of the largest global telecommunications companies, infrastructure operators, climate researchers, civil and defense agencies. At Sceye, we aim high, and we want you to join us at the stratospheric edge of innovation. As part of our mission-driven team, you will contribute to building breakthrough technologies that are changing the way we connect and observe the world. We are looking for individuals who bring not only deep expertise but also bold vision and an unwavering commitment to excellence. About the Position: Sceye is seeking a Mission Operations Specialist - Ground Systems to deploy, integrate, configure, verify, operate, troubleshoot, and sustain mission-critical ground systems used for HAPS testing and global operations. The role provides primary technical depth in fielded ground system capability while maintaining secondary qualification in mission execution, test support, mission readiness, and operational surge activities. This is a junior, hands-on role spanning Linux-based computers, operator workstations, networks, mission applications, telemetry interfaces, RF equipment, data logging, time synchronization, storage, power, cabling, and deployable field hardware. The Specialist executes approved architectures and baselines, supports integration and readiness activities, and coordinates complex issues with the Senior Ground Systems Integrator, Ground Systems Engineer, Software, Enterprise IT, and Mission Operations. The role does not independently establish architecture or approve engineering design changes. What You Will Do: The Mission Operations Specialist - Ground Systems position will be a multi-functional role. We are looking for a positive, highly motivated professional with a strong work ethic, a collaborative and open-minded approach, and the humility and drive to work hard, continuously learn, and contribute beyond their primary area of expertise wherever the mission requires. Ground System Deployment and Integration Assist with assembly, configuration, integration, checkout, packing, deployment, installation, teardown, and redeployment of approved Ground Control Station configurations Integrate servers, Linux workstations, network devices, storage, RF and telemetry interfaces, Operator displays, communications equipment, power distribution, UPS equipment, cabling, and supporting field hardware Replicate approved ground system baselines for additional HAPS, missions, sites, training environments, and test configurations Configuration, Verification, and Acceptance Apply approved configurations to Linux systems, network devices, Operator stations, remote nodes, mission applications, and supporting infrastructure Assist with integration, checkout, acceptance, regression, and operational-readiness procedures Verify telemetry flow, network connectivity, communications, time synchronization, logging, storage, user access, remote connectivity, and Operator functionality Collect and organize logs, screenshots, test results, configuration data, and other objective evidence required for acceptance and troubleshooting Maintain inventories, equipment assignments, network diagrams, cable maps, build records, software and hardware versions, and deployment records Troubleshooting and Sustainment Assist with intermediate troubleshooting of ground system hardware, Linux services, networking, mission applications, data interfaces, telemetry, RF equipment, and Operator workstations Systematically isolate faults to equipment, service, interface, configuration, network path, power source, or external dependency Reproduce reported problems in integration or test environments when practical and document symptoms, actions, results, workarounds, and final resolution Coordinate complex software, automation, architectural, cybersecurity, or design issues with the responsible technical authority Perform preventive maintenance, spares management, lifecycle support, and readiness restoration for fielded systems Operational Readiness and Mission Support Assist with ground system readiness checks before simulations, tests, deployments, and live missions Verify availability and configuration of required hardware, software, networks, communications, documentation, tools, spares, and support equipment Provide ground system support during mission setup, checkout, shift turnover, live operations, maintenance, and recovery from outages Perform HAPS Operator or other assigned Mission Operations duties when qualified, current, and designated Support remote sites and distributed operations while maintaining escalation paths to centralized technical and operational authorities Standardization, Training, and Improvement Create and maintain installation instructions, configuration guides, checkout procedures, troubleshooting references, deployment checklists, and sustainment records Standardize labeling, cabling, equipment layouts, packing, inventories, readiness evidence, and field practices across sites Support scripted tests, automation, validation tooling, and data collection with the Ground Systems Engineer What We Are Looking For: Knowledge, Skills, and Abilities Advanced hands-on ability with Linux systems, Ethernet networking, IP addressing, managed switches, remote access, cabling, racks, field hardware, and systematic troubleshooting Ability to integrate and sustain mission-critical systems using approved designs, configuration baselines, and technical procedures Working knowledge of telemetry, RF communications, logging, data storage, time synchronization, operator workstations, and distributed-system dependencies Ability to distinguish authorized configuration work from changes requiring technical-authority or configuration-control approval Strong technical-writing and documentation skills for diagrams, build records, troubleshooting notes, checklists, and acceptance evidence Ability to work safely around electrical equipment, racks, antennas, power distribution, UPS systems, fiber, copper cabling, and field enclosures Ability to coordinate effectively across Mission Operations, Software, Enterprise IT, Safety, and external site personnel Ability to lead small integration and deployment efforts while remaining hands-on Strong attention to detail when handling safety-critical content, records, and controlled documents Ability to learn unfamiliar HAPS systems, mission software, communications systems, procedures, and operational concepts Required Qualifications: Four or more years of experience assembling, configuring, integrating, operating, maintaining, or troubleshooting technical systems in aviation, aerospace, telecommunications, field service, IT, defense, or mission-critical operations Demonstrated experience with Linux-based systems and command-line environments Working knowledge of Ethernet networking, IP addressing, cabling, switches, and connectivity troubleshooting Experience with Bash, Python, Git, containers, virtualization, infrastructure automation, or configuration-management tools Experience executing technical procedures, integration tests, acceptance checks, or system-readiness activities Experience maintaining configuration records, equipment inventories, diagrams, build records, or comparable technical documentation Ability to lift, move, install, and safely work around deployable technical equipment consistent with applicable workplace requirements Ability to travel and work nonstandard schedules during deployments, tests, and live missions Ability to work in a safety-focused and procedurally disciplined operational environment Preferred Qualifications: Associate or Bachelor's degree in Information Technology, electronics, networking, aviation technology, engineering technology, or a related field, or equivalent advanced hands-on experience Experience supporting ground control systems, UAV operations, aerospace testing, telemetry networks, or mission-control environments Familiarity with VLANs, firewalls, VPNs, managed switches, remote access, and cybersecurity-controlled environments Experience with RF communications, software-defined radios, antennas, telemetry, precision timing, or radio-network equipment Experience with equipment racks, power distribution, UPS systems, fiber, copper cabling, environmental controls, and deployable enclosures Prior military, aviation, telecommunications, field-service, or remote-site operations experience What We Offer: At Sceye . click apply for full job details
Lunar Outpost
Arvada, Colorado
Job Description Job Description Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also driving positive impacts here on Earth. Lunar Outpost is seeking an Electronics and Harness Technician to support the build, assembly, integration, and testing of electrical hardware for lunar vehicles, robotics, and spacecraft systems. In this hands-on role, you will build and inspect wiring harnesses, assemble electronic hardware, perform soldering and rework, and support engineering teams with testing and troubleshooting. Your work will directly contribute to hardware destined for lunar missions and other advanced space technologies. Take the with Lunar Outpost and work on the Lunar Terrain Vehicle (LTV), which will carry NASA astronauts farther than they've ever been before on the lunar surface! Working Conditions / Schedule: This position is required to be onsite Monday, Tuesday, Thursday, and Friday from 9:00 a.m. to 5:00 p.m. Where applicable, employees may work remotely on Wednesdays from 9:00 a.m. to 5:00 p.m. Additional hours may be required based on business needs. Key Responsibilities: Perform hand soldering, rework, and repair of through-hole and surface-mount electronic components Fabricate, assemble, and inspect spacecraft and prototype wiring harnesses, cable assemblies, and electrical hardware Build and integrate electromechanical assemblies from engineering drawings, schematics, work instructions, and wiring diagrams Perform continuity, insulation resistance, and basic electrical verification testing Identify and document hardware nonconformances, workmanship issues, and assembly discrepancies Assist with inventory management, parts preparation, and hardware organization Maintain a clean, safe, and organized laboratory and production environment Support vehicle, subsystem, and prototype integration activities as required Required Qualifications: High school diploma, GED, technical certification, or equivalent experience 3-5 years of experience in electronics assembly, cable fabrication, soldering, or related technical work Demonstrated experience building and inspecting cable assemblies and wiring harnesses Proficiency in hand soldering and electronic rework techniques Ability to read engineering drawings, wiring diagrams, assembly instructions, and schematics Experience using standard electrical test equipment such as multimeters, power supplies, and oscilloscopes Familiarity with ESD controls and electronics handling best practices Strong attention to detail and commitment to quality workmanship Ability to work effectively in a fast-paced hardware development environment Strong communication and organizational skills U.S. Person Preferred Qualifications: IPC J-STD-001 Certified IPC Specialist (CIS) or equivalent solder workmanship certification IPC/WHMA-A-620 Certified IPC Specialist (CIS) or equivalent harness fabrication and inspection certification IPC-A-610 Certified IPC Specialist (CIS) or equivalent electronic assembly inspection certification Experience building aerospace, robotics, automotive, defense, or other high-reliability hardware Experience with aerospace-grade connectors, including Micro-D, D-Sub, circular, and other high-reliability interconnect systems Experience with environmental or vibration test preparation and support Ability to troubleshoot wiring, connector, and assembly issues Experience supporting prototype or low-volume manufacturing environments Compensation & Benefits: Compensation level and base salary are competitively structured and thoughtfully determined based on factors such as relevant skills, experience, education, and the scope of the role. Comprehensive health coverage: Medical, dental, and vision benefits, with 70% of premiums covered by the employer Paid time off: Three (3) weeks per year of vacation Retirement plan: Up to 4% employer match on 401(k) contributions Paid holidays: 11 company-recognized holidays Parental leave Educational reimbursement opportunities to support company objectives, continued learning, and career development Lunar Outpost Inc. is an equal opportunity employer. Lunar Outpost Inc. does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, ethnicity, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. All employees, including executives and human resources personnel, are expected to conduct themselves with professionalism and treat others with dignity and respect in accordance with this policy.
Job Description Job Description Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also driving positive impacts here on Earth. Lunar Outpost is seeking an Electronics and Harness Technician to support the build, assembly, integration, and testing of electrical hardware for lunar vehicles, robotics, and spacecraft systems. In this hands-on role, you will build and inspect wiring harnesses, assemble electronic hardware, perform soldering and rework, and support engineering teams with testing and troubleshooting. Your work will directly contribute to hardware destined for lunar missions and other advanced space technologies. Take the with Lunar Outpost and work on the Lunar Terrain Vehicle (LTV), which will carry NASA astronauts farther than they've ever been before on the lunar surface! Working Conditions / Schedule: This position is required to be onsite Monday, Tuesday, Thursday, and Friday from 9:00 a.m. to 5:00 p.m. Where applicable, employees may work remotely on Wednesdays from 9:00 a.m. to 5:00 p.m. Additional hours may be required based on business needs. Key Responsibilities: Perform hand soldering, rework, and repair of through-hole and surface-mount electronic components Fabricate, assemble, and inspect spacecraft and prototype wiring harnesses, cable assemblies, and electrical hardware Build and integrate electromechanical assemblies from engineering drawings, schematics, work instructions, and wiring diagrams Perform continuity, insulation resistance, and basic electrical verification testing Identify and document hardware nonconformances, workmanship issues, and assembly discrepancies Assist with inventory management, parts preparation, and hardware organization Maintain a clean, safe, and organized laboratory and production environment Support vehicle, subsystem, and prototype integration activities as required Required Qualifications: High school diploma, GED, technical certification, or equivalent experience 3-5 years of experience in electronics assembly, cable fabrication, soldering, or related technical work Demonstrated experience building and inspecting cable assemblies and wiring harnesses Proficiency in hand soldering and electronic rework techniques Ability to read engineering drawings, wiring diagrams, assembly instructions, and schematics Experience using standard electrical test equipment such as multimeters, power supplies, and oscilloscopes Familiarity with ESD controls and electronics handling best practices Strong attention to detail and commitment to quality workmanship Ability to work effectively in a fast-paced hardware development environment Strong communication and organizational skills U.S. Person Preferred Qualifications: IPC J-STD-001 Certified IPC Specialist (CIS) or equivalent solder workmanship certification IPC/WHMA-A-620 Certified IPC Specialist (CIS) or equivalent harness fabrication and inspection certification IPC-A-610 Certified IPC Specialist (CIS) or equivalent electronic assembly inspection certification Experience building aerospace, robotics, automotive, defense, or other high-reliability hardware Experience with aerospace-grade connectors, including Micro-D, D-Sub, circular, and other high-reliability interconnect systems Experience with environmental or vibration test preparation and support Ability to troubleshoot wiring, connector, and assembly issues Experience supporting prototype or low-volume manufacturing environments Compensation & Benefits: Compensation level and base salary are competitively structured and thoughtfully determined based on factors such as relevant skills, experience, education, and the scope of the role. Comprehensive health coverage: Medical, dental, and vision benefits, with 70% of premiums covered by the employer Paid time off: Three (3) weeks per year of vacation Retirement plan: Up to 4% employer match on 401(k) contributions Paid holidays: 11 company-recognized holidays Parental leave Educational reimbursement opportunities to support company objectives, continued learning, and career development Lunar Outpost Inc. is an equal opportunity employer. Lunar Outpost Inc. does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, ethnicity, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. All employees, including executives and human resources personnel, are expected to conduct themselves with professionalism and treat others with dignity and respect in accordance with this policy.
L3Harris Technologies
Mason, Ohio
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist Systems Engineer Job Code: 41894 Job Location: Mason, OH - On Site Job Schedule: 9/80 - Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: As a Systems Engineer Senior Specialist in our IR sensors business area, you will have the opportunity to work various programs solving our customer's most difficult technical challenges . A Development SME, who supports planning activities to address development activity processes and procedures. You could be the technical lead of the program team, perform technical planning, design, analysis, implementation, system integration, validation and verification. Analyses are performed at all levels to include concept, design, fabrication, test, installation, operation, maintenance, and disposal. This position supports the Missile Solutions (MSL) Segment, a great team of talented professionals with world class technical expertise who take a collaborative approach to engineering and enjoy working together. We have a long history of innovative and exceptional performance; we have earned our place as a trusted provider to our customers. Essential Functions: Systems engineering for EO/IR (Electro-Optical/Infra-Red) sensor systems. Lead or support technical planning, system integration, validation, and verification activities in support of programs and development efforts. Expected to coach / mentor others on the team. Judgment and Decision Making - Consider the relative costs and benefits of potential actions to choose the most appropriate solution. Systems Analysis - Determine how a system should work and how changes in conditions, operations, and the environment will affect outcomes / performance. Systems Evaluation - Identify measures or indicators of system performance and the actions needed to improve or correct performance relative to the goals of the system. Lead or support across system development lifecycle. Customer Interaction - Technical Point of Contact to our customers and our suppliers. Must have the ability to obtain a DoD security clearance Qualifications: Bachelor's degree in Electrical, Electronics, Computer, Physics, or related Engineering discipline with a minimum of 6 years of prior relevant experience or Graduate Degree with a minimum of 4 years prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Active DoD Security Clearance Preferred Additional Skills: Demonstrated experience within the EO/IR (Electro-Optical/Infra-Red) sensor field Demonstrated experience in a technical discipline supporting EO/IR sensor or component work Experience writing BOEs and supporting proposals Demonstrated experience in the architecture, specification, implementation, simulation, test, verification, validation, and debugging Demonstrated complex problem solving and decision making - Able to develop and evaluate options and implement solutions; able to consider the relative costs and benefits of potential actions to choose the most appropriate solution Excellent interpersonal skills, ability to work well within and outside of the organization including customers, vendors, and leadership with minimal oversight Knowledge of military and/or NASA component specifications, design processes, and hardware test/verification procedures. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist Systems Engineer Job Code: 41894 Job Location: Mason, OH - On Site Job Schedule: 9/80 - Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: As a Systems Engineer Senior Specialist in our IR sensors business area, you will have the opportunity to work various programs solving our customer's most difficult technical challenges . A Development SME, who supports planning activities to address development activity processes and procedures. You could be the technical lead of the program team, perform technical planning, design, analysis, implementation, system integration, validation and verification. Analyses are performed at all levels to include concept, design, fabrication, test, installation, operation, maintenance, and disposal. This position supports the Missile Solutions (MSL) Segment, a great team of talented professionals with world class technical expertise who take a collaborative approach to engineering and enjoy working together. We have a long history of innovative and exceptional performance; we have earned our place as a trusted provider to our customers. Essential Functions: Systems engineering for EO/IR (Electro-Optical/Infra-Red) sensor systems. Lead or support technical planning, system integration, validation, and verification activities in support of programs and development efforts. Expected to coach / mentor others on the team. Judgment and Decision Making - Consider the relative costs and benefits of potential actions to choose the most appropriate solution. Systems Analysis - Determine how a system should work and how changes in conditions, operations, and the environment will affect outcomes / performance. Systems Evaluation - Identify measures or indicators of system performance and the actions needed to improve or correct performance relative to the goals of the system. Lead or support across system development lifecycle. Customer Interaction - Technical Point of Contact to our customers and our suppliers. Must have the ability to obtain a DoD security clearance Qualifications: Bachelor's degree in Electrical, Electronics, Computer, Physics, or related Engineering discipline with a minimum of 6 years of prior relevant experience or Graduate Degree with a minimum of 4 years prior related experience. In lieu of a degree, minimum of 10 years of prior related experience. Active DoD Security Clearance Preferred Additional Skills: Demonstrated experience within the EO/IR (Electro-Optical/Infra-Red) sensor field Demonstrated experience in a technical discipline supporting EO/IR sensor or component work Experience writing BOEs and supporting proposals Demonstrated experience in the architecture, specification, implementation, simulation, test, verification, validation, and debugging Demonstrated complex problem solving and decision making - Able to develop and evaluate options and implement solutions; able to consider the relative costs and benefits of potential actions to choose the most appropriate solution Excellent interpersonal skills, ability to work well within and outside of the organization including customers, vendors, and leadership with minimal oversight Knowledge of military and/or NASA component specifications, design processes, and hardware test/verification procedures. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Puffer-Sweiven
Houston, Texas
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
