it job board logo
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
  • Recruiting? Post a job
  • Sign in
  • Sign up
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

11 jobs found

Email me jobs like this
Refine Search
Current Search
central office installer levels 1 4
Level 3 Central Office Installer
Adex Corporation New York, New York
Job Description Job Description Level 4 Installer Pay Rate: $31-$32.50/hr NYC Metro NIGHTS The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
11/21/2026
Full time
Job Description Job Description Level 4 Installer Pay Rate: $31-$32.50/hr NYC Metro NIGHTS The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
Data Center Technician - Inside Plant (ISP)
Network Connex Phoenix, Arizona
Job Description Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary : The Cable Installer is a technician role that provides installation services across multiple platforms in support of head ends, hubs, and central offices. Technical responsibilities include working with a team to install various pieces of electronic gear and cabling systems to support our customers in the MSO, cable, telephone, data center and communications industry. Job Duties and Responsibilities: Collaborate with team members to complete cabling installation activities. Assist in equipment installation and ensure proper setup. Support infrastructure installation tasks as part of project requirements. Perform testing of video, RF, coax, fiber, and UTP systems to ensure functionality. Conduct quality assurance checks to maintain compliance with standards and specifications. Job Knowledge, Skills, or Abilities: Strong understanding of cable TV systems, including head-ends and equipment such as CMTS, CASA, DCM, and related technologies. Hands-on experience with infrastructure setup and installation processes. Proficient in working with coaxial, fiber, and unshielded twisted pair (UTP) cable assemblies, including stitching/lacing and proper installation techniques. Knowledge of DC power systems and their application in installations. Ability to use basic PC and mobile applications for configuration and troubleshooting. Education and Experience: 1+ years field technical installation and cabling experience 1+ years working documentation on technical jobs (JCR, SOW, etc.) 1+ years of leading work/jobs in the field CDL Class B preferred. Physical Requirements: Must be able to lift 100lbs Must be able to pass drug screening NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. EEOC- Minority/Female/Disability/Veteran National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
11/16/2026
Full time
Job Description Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Job Summary : The Cable Installer is a technician role that provides installation services across multiple platforms in support of head ends, hubs, and central offices. Technical responsibilities include working with a team to install various pieces of electronic gear and cabling systems to support our customers in the MSO, cable, telephone, data center and communications industry. Job Duties and Responsibilities: Collaborate with team members to complete cabling installation activities. Assist in equipment installation and ensure proper setup. Support infrastructure installation tasks as part of project requirements. Perform testing of video, RF, coax, fiber, and UTP systems to ensure functionality. Conduct quality assurance checks to maintain compliance with standards and specifications. Job Knowledge, Skills, or Abilities: Strong understanding of cable TV systems, including head-ends and equipment such as CMTS, CASA, DCM, and related technologies. Hands-on experience with infrastructure setup and installation processes. Proficient in working with coaxial, fiber, and unshielded twisted pair (UTP) cable assemblies, including stitching/lacing and proper installation techniques. Knowledge of DC power systems and their application in installations. Ability to use basic PC and mobile applications for configuration and troubleshooting. Education and Experience: 1+ years field technical installation and cabling experience 1+ years working documentation on technical jobs (JCR, SOW, etc.) 1+ years of leading work/jobs in the field CDL Class B preferred. Physical Requirements: Must be able to lift 100lbs Must be able to pass drug screening NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. EEOC- Minority/Female/Disability/Veteran National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Level 4 Installer (National Travel)
CBM of America Addison, Texas
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
11/06/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Level 4 Central Office Installer
Adex Corporation Newark, New Jersey
Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation Northern New Jersey The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
11/05/2026
Full time
Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation Northern New Jersey The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
Level 4 Central Office Installer
Adex Corporation New Castle, Delaware
Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation New Castle, DE and Eastern, PA The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
11/05/2026
Full time
Job Description Job Description Level 4 CO Installer Must Have Reliable Transportation New Castle, DE and Eastern, PA The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Summary of Requirements: • Power running and terminating • Cat cabling and RJ45 connecting • Fiber running, scoping, cleaning, testing and terminating • Leads must have admin skills for daily reporting, and customer interaction • Must have basic hand tools. Duties and Responsibilities: • Work with minimum supervision and be certified in Skill levels 1, 2 and 3 • Input job status, issues and requests and all-expense-related information into the Project Management platform. • Reconcile materials for sales order using web-based inventory control forms • Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. • Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. • Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. • Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. • Maintain tools assigned to the job as well as monitor tool calibration requirements • Perform hardware testing, such as power verification, device provisioning and system tests. • Responsible for all work meeting all customer standards. • Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: • Lead Installation Technician should have a minimum of 5 years Data Center/PoP/CO installation experience. • Good mechanical aptitude. • Knowledge of basic power tools. • Optical routing equipment installations • Fiber optic cable installation & testing practices • AC/DC power • Infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Physical Demands: The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.)
Level 4 Installer
Adex Corporation Newark, New Jersey
Job Description Job Description Level 4 Installer to work Telecommunication properties in North/Central New Jersey. : Installation Teams working in Telecommunication MSC's for Telecommunication and Product installs All to be strong in -power running and terminating - cat cabling and RJ45 connecting -fiber running, scoping, cleaning, testing and terminating Leads must have Admin skills for daily reporting, and customer interaction Must have basic hand tools. The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3 Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments Should have good knowledge of optical routing equipment installations Should have good knowledge of fiber optic cable installation & testing practices Should have good knowledge of AC/DC power Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience Physical Demands The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.
11/05/2026
Full time
Job Description Job Description Level 4 Installer to work Telecommunication properties in North/Central New Jersey. : Installation Teams working in Telecommunication MSC's for Telecommunication and Product installs All to be strong in -power running and terminating - cat cabling and RJ45 connecting -fiber running, scoping, cleaning, testing and terminating Leads must have Admin skills for daily reporting, and customer interaction Must have basic hand tools. The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific Company and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3 Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments Should have good knowledge of optical routing equipment installations Should have good knowledge of fiber optic cable installation & testing practices Should have good knowledge of AC/DC power Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience Physical Demands The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices.
Level 4 Installer (National Travel)
CBM of America Addison, Texas
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/06/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Level 4 Installer (National Travel)
CBM of America Charlotte, North Carolina
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Level 4 Installer (National Travel)
CBM of America Addison, Texas
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Installer 4
CBM of America, LLC Carrollton, Texas
Job Description Job Description Level 4 Installer Reports to: Installation Supervisor or Project Manager Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary : The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities : Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws.
10/02/2026
Full time
Job Description Job Description Level 4 Installer Reports to: Installation Supervisor or Project Manager Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary : The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities : Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws.
Level 4 Installer (National Travel)
CBM of America Charlotte, North Carolina
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.

Modal Window

  • Home
  • Contact
  • About Us
  • FAQs
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • IT blog
  • Facebook
  • Twitter
  • LinkedIn
  • Youtube
© 2008-2026 IT Job Board