30 jobs found

Job Description Job Description Job description Must be comfortable with a lot of travel. Candidates will need to be working out of different locations within a 72 hour notice. Client will provide all travel arrangements. Position summary The Traveling Data Center Installation Technician travels to customer sites to support new data center launches, expansions, and equipment deployments. The technician receives, moves, assembles, positions, and equips server racks and cabinets, also referred to as data towers, according to approved layouts and instructions. The position supports safe, accurate project completion through component installation, cable routing, inventory control, quality checks, and installation records. Essential duties and responsibilities Receive, unpack, inspect, and stage racks, servers, network equipment, cables, and installation materials. Report shortages, damage, and discrepancies. Move and position racks and cabinets using approved rack movers, pallet jacks, lifting devices, and team handling methods. Verify placement against floor plans and measurements. Assemble racks and install rails, brackets, shelves, panels, and cable management hardware using appropriate tools and specified torque requirements. Mount servers and authorized components in designated rack positions following installation drawings, manufacturer instructions, and customer standards. Route, secure, dress, and label copper and fiber cables; make approved connections while protecting cable bend radius, connectors, airflow, and service access. Perform assigned visual inspections and basic installation or connectivity checks within the technician's training and authorization. Escalate defects and technical issues to qualified personnel. Record asset identifiers, serial numbers, rack locations, completed tasks, and discrepancies in inventory systems, work orders, and installation checklists. Coordinate with deployment leads, customer representatives, warehouse teams, and technical staff to sequence work and meet project milestones. Follow site access, confidentiality, asset protection, and data security requirements. Use required personal protective equipment and electrostatic discharge controls. Follow applicable equipment handling, electrical safety, and energy isolation procedures. Stop and report unsafe work. Operate powered material handling equipment only after required training and site authorization. Use mechanical assistance and team handling for heavy or awkward equipment. Maintain clean, organized work areas, remove packaging, and segregate waste under site procedures. Complete handoff records and support resolution of installation punch list items. Perform related deployment or assigned home site duties consistent with training and business needs. Scope of authorized work Electrical circuit installation energized electrical work, equipment energization, and advanced server or network configuration require separately qualified and authorized personnel. This role performs only tasks within the approved project scope and the employee's training. Required qualifications High school diploma or equivalent, or equivalent relevant training and experience. At least one year of related experience in data center deployment, server rack assembly, hardware installation, electronics assembly, structured cabling, or comparable equipment installation. Ability to read work instructions, rack elevations, floor plans, diagrams, part numbers, and installation checklists. Ability to use hand tools, approved power tools, and measuring devices safely and accurately. Basic computer skills for inventory transactions, work orders, email, and project documentation. Ability to travel for extended assignments and work assigned schedules, including nights, weekends, and overtime when required. Strong attention to detail, dependable attendance, clear communication, and ability to collaborate with different site teams. Preferred qualifications Experience in customer data centers or large-scale technology deployment environments. Familiarity with server components, rack hardware, copper and fiber cabling, asset tracking, and electrostatic discharge precautions. Relevant technical training or certifications such as CompTIA A+, structured cabling training, or material handling equipment training. Travel and scheduling expectations This traveling field position requires frequent overnight travel and temporary assignments away from the employee's home location. Travel percentage, assignment duration, reporting location, and work schedules will be communicated before deployment and may change with customer project needs. Between deployments, employees may support an approved local site in related operational duties. Travel arrangements, lodging, eligible expenses, and applicable allowances follow the approved company travel policy. Employees must accurately record all work and travel time as instructed. Travel time and overtime will be paid as required by applicable law and company policy. Physical demands and work environment Essential functions involve prolonged standing and walking, bending, kneeling, reaching, handling tools and small components, and pushing or pulling equipment with approved aids. Work may include lifting and carrying components up to 50 pounds, and accessing racks from approved platforms or ladders. Heavy or awkward items require mechanical assistance or team handling. Specific lifting limits and task frequencies must be confirmed through the site job assessment. Work occurs in data centers, staging areas, and warehouse or active deployment environments with equipment noise, temperature variation, restricted access, and nearby material handling activity. Employees must follow applicable site safety rules. Essential functions may be performed with or without reasonable accommodation. Performance expectations Complete installations accurately and within agreed project milestones. Maintain reliable asset and task records, promptly report discrepancies, and minimize avoidable damage and rework. Demonstrate safe work practices, protect customer assets and information, and communicate respectfully with colleagues and customers.

Job Description Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seek experienced technician/assemblers. The suitable candidate should have a strong background with mechanical and electrical assemblies including testing and basic troubleshooting skills as well as some soldering experience. This position focuses on manufacturing & testing equipment, candidate must have a fundamental understanding of digital electronics, AC and DC circuits, power supplies and must have some soldering experience such as attaching wires to switches as well as soldering thru hole and surface mount components to PCB's. The job may also require some basic troubleshooting using a DVM. Candidate must be well organized and capable or documenting and maintaining production reports on excel spreadsheets. Essential Requirements: Must be able to follow assembly procedures. Must have some soldering experience, IPC certification is a plus. Must know how to use a Digital Voltmeter. Must be able to follow repair procedures on all products. Must be able to read schematics. Must Document and submit all failures of equipment to QA Manager. Maintain quality control on the production of all equipment. Maintain knowledge of all software and firmware utilized to support all products. Ensure all company equipment and tools are in proper working conditions. Maintain a safe and well-organized work area. Follow company procedures and policies. Conduct yourself in a professional manner at all times. Education / Experience Requirements: Qualified candidates must have 1-2 years of bench level experience to be considered. Must have some soldering experience as well as some troubleshooting and assembly experience. Candidate must have some experience with electronic test equipment and the ability to read a schematic and follow all assembly and testing procedures. Candidate must have experience with Microsoft Office, Outlook and Excel Software. Experience with job tracking software is a plus. Benefits: Medical Dental Vision 401K Group Life PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Job Description RF Design Technician Trans-Tech is the leading design and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, circulators and isolators, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors. Position Overview: The RF Design Technician is responsible for the development, design, and manufacturing support of microwave passive devices, with a focus on ceramic resonator-based filters. This role involves concept development, design documentation, prototype testing, and successful manufacturing introduction. The technician will provide technical leadership and support across various stages of product development and lifecycle management. Essential Job Functions: Technical Support: Provide training and technical support from concept through prototype to ensure smooth transition into volume manufacturing. Interface with manufacturing to resolve production and technical problems. Assist with Design and Development: Conceptualize, plan, design, develop, and analyze microwave filters for frequencies between Component Selection: Select electronic parts, components, or integrated circuitry based on specifications and reliability. Review vendor capabilities to support product development. Bench Design and Tuning: To build prototype filters on the bench tuned to meet design performance specifications. Precision Solder Techniques: Apply skills for solder/solder reflow of surface-mount devices (SMD) and apply visual acceptance criteria for inspection of finished products as defined in IPC-A-610 Competencies: Good soldering techniques and able to do solder rework using a microscope. Familiarity with ESD safety and prevention. Experience with RF Test and Measurement equipment, Network Analyzer, Spectrum Analyzer, Frequency Generators, Power Amplifiers, Oscilloscopes, DVM's, etc. Experience with multi-layer printed wiring boards (PWB) design and layout up to 40 GHz. Knowledge of metallization processes, including thick film processes. Ability to use diagnostic and microwave evaluation and test equipment. Strong analytical and design methodology skills. Proficiency with AutoCAD or SolidWorks and standard computer software packages (Microsoft Word and Excel). Qualifications: Education: High school diploma or equivalent plus formal military or commercial electronics training, or an associate degree in electronics technology with knowledge in radio frequency/microwave theory and technology. Experience: Experience in RF/microwave hardware development, with progressively increasing responsibility is a plus. Skills: Competent in RF measurements and design validation procedures with the ability to apply microwave theory in the design, testing, and troubleshooting of passive microwave devices is a plus. Ability to read/follow wiring schematics. Knowledge of the ANSYS simulation software a plus. Security: Must be a US Person. Benefits include: Medical, Dental, and Vision insurance Option to participate in 401(k) plan with safe harbor match Company-paid Life Insurance Paid time off Paid holidays Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

Job Description Job Description At Wavelynx, we design and manufacture open-architecture physical access control hardware and software solutions. Our reader and controller technologies bridge the gap between traditional smart credentials, mobile credentials (Apple Wallet, Employee Badges), and secure cloud-managed networks. We empower physical security systems to be flexible, interoperable, and future-proof. We are seeking an RMA Technician who will be responsible for receiving, processing, and testing returned Wavelynx products. This entry-level role reports to Operations and is based on site in Broomfield, Colorado. The technician diagnoses returned units, documents findings, and works closely with the QA, Support, and Electrical Engineering teams to test and troubleshoot products. Duties/Responsibilities Receive and log incoming RMA units in HubSpot and NetSuite. Track each RMA through receiving, testing, and final disposition, and keep records current in both systems. Test returned APEX and Ethos readers to confirm or rule out reported failures. Diagnose the cause of failure using a multimeter and software test tools. Write clear findings for each unit so Operations can make repair, replace, or credit decisions. Support the QA team with product testing and issue verification. Help the Support team reproduce and troubleshoot issues reported from the field. Work with the Electrical Engineering team on bench testing, and learn soldering and board-level work over time. Keep the RMA work area and test equipment organized and in working order. Assist Production with issues or questions as needed. Required Skills/Abilities Some hands-on experience testing or troubleshooting electronic hardware. Basic familiarity with a multimeter or similar test equipment. Comfortable learning new software tools and business systems such as HubSpot and NetSuite. Able to write clear, accurate notes on test results. Basic computer skills, including creating and editing documents and spreadsheets. Detail-oriented and consistent. Works well as a productive member of a team. Ability to properly maintain and perform basic repairs on equipment. Basic ability in mathematics, reading, and writing. Education and Experience Experience in the access control or security industry is preferred. Experience in a hardware test, repair, or RMA role preferred. Experience in a manufacturing environment is preferred. High school diploma or equivalent required. Physical Requirements Prolonged periods of standing and performing repetitive tasks. Ability to lift up to 25 pounds. Able to work extended hours when required. Benefits include great rates on company-sponsored medical, dental, and vision with HSA-eligible plans available, generous retirement with up to 6% 401k match, and holidays, vacation, and sick leave.

Job Description Job Description SUMMARY: The Revenue Cycle Specialist is responsible for researching, correcting, resubmitting, and resolving medical claims that have been rejected, denied, underpaid, or otherwise not processed correctly by insurance payers. This position focuses on identifying the causes of claim issues, coordinating necessary corrections with internal departments and external payers, and following claims through to resolution. The Medical Billing Specialist works closely with the Billing Technician, Business Office Manager, providers, coding staff, clinical departments, and insurance representatives to resolve billing issues, reduce preventable denials, and support appropriate reimbursement for services provided by the Health Center. ESSENTIAL DUTIES AND RESPONSIBILITIES will include the following: Electronic Clearinghouse Rejections Monitor the designated electronic clearinghouse for rejected claims, submission errors, and other claim transmission issues. Review and address electronic clearinghouse rejections promptly upon receipt. Research rejection reasons and determine the appropriate corrective action. Correct and resubmit claims when issues can be resolved within the scope of the position. Coordinate with the Billing Technician, registration, coding staff, providers, or other departments when additional information or corrections are required. Document rejection reasons, actions taken, outstanding issues, and follow-up plans. Monitor unresolved rejections until corrected and resubmitted or otherwise appropriately resolved. Ensure no rejection remains unaddressed or without documented follow-up. Denied Claims and Corrected Claim Submission Review remittance advice, explanations of benefits (EOBs), denial reports, and claim status information to identify denied or incorrectly processed claims. Research denial codes, payer explanations, claim history, billing requirements, and supporting documentation to determine the reason for denial. Correct claim information and coordinate necessary documentation or coding clarification. Prepare and submit corrected claims, resubmissions, reconsiderations, and appeals as appropriate. Verify that corrections address the original rejection or denial reason before resubmission. Track corrected claims to confirm receipt and monitor payer processing. Maintain documentation of denial reasons, corrective actions, resubmission dates, payer responses, and outcomes. Escalate claims requiring management review, clinical clarification, or additional intervention. Denial Research and Resolution Investigate recurring and complex denials to identify root causes and prevent repeated billing errors. Research payer policies, eligibility issues, authorization requirements, filing limits, coding requirements, and documentation requirements relevant to denied claims. Contact insurance representatives and use payer portals to clarify denial reasons, claim status, payment decisions, and required corrective actions. Coordinate with providers, coding staff, and clinical departments to obtain missing or corrected information. Prepare and submit appeals or reconsideration requests within applicable payer deadlines when appropriate. Monitor appealed claims until a determination is received. Identify recurring denial trends and report significant issues to the Business Office Manager. Unpaid and Incorrectly Processed Claims Research unpaid, pending, underpaid, and incorrectly processed claims to determine the cause and appropriate resolution. Follow up with payers regarding claims that remain unpaid or have not been processed correctly. Review discrepancies between billed amounts, payer adjudication, remittance advice, and expected reimbursement. Determine whether claim correction, resubmission, additional documentation, reconsideration, or appeal is appropriate. Monitor claims approaching timely filing limits, appeal deadlines, and other payer-specific timeframes. Maintain a tracking system documenting claim status, actions taken, outstanding issues, and follow-up dates. Escalate unresolved claims with significant financial impact or barriers to resolution to the Business Office Manager. Continue follow-up until the claim is resolved, appropriately escalated, or closed with documented justification. Prior Authorization-Related Claim Issues Research claim denials related to missing, incomplete, expired, or mismatched prior authorizations. Coordinate with appropriate clinical or administrative staff to obtain authorization information or supporting documentation. Communicate authorization-related claim issues to the responsible department. Monitor corrected claims related to authorization issues to determine whether the payer has processed them. Document actions taken and escalate unresolved issues as appropriate. This responsibility focuses on authorization issues affecting claim payment. Routine prior authorization requests remain with designated staff unless otherwise assigned. Documentation and Process Improvement Maintain accurate records of rejections, denials, corrected claims, appeals, payer communications, and resolution efforts. Ensure unresolved items have documented actions, next steps, and follow-up dates. Coordinate with the Billing Technician and other departments to address recurring claim issues. Identify opportunities to reduce preventable rejections and denials and improve claim resolution. Assist with billing reviews, payer audits, and quality improvement activities as assigned. Maintain knowledge of payer policies, claim correction procedures, appeal requirements, and applicable billing guidelines. Confidentiality and Compliance Protect patient confidentiality and the security of health records and other confidential information. Comply with applicable privacy and security laws, including HIPAA and the Privacy Act of 1974 when applicable, and Health Center policies. Follow applicable payer requirements and established Health Center procedures. Perform other related duties within the scope of the position as assigned by the Business Office Manager. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform the essential duties satisfactorily. The requirements listed below represent the knowledge, skills, and abilities needed for the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. EDUCATION AND EXPERIENCE: Associate of Arts (AA) degree or at least two (2) years of relevant work experience in medical billing, healthcare administration, insurance claims processing, accounts receivable, or a related field. Ability to research billing issues, identify errors, follow established procedures, and complete corrective actions accurately and promptly. Strong attention to detail and ability to organize work, meet deadlines, maintain accurate documentation, and communicate effectively with internal departments and insurance payers. Ability to learn and apply insurance payer requirements, claim correction procedures, and denial resolution processes. Experience reviewing electronic clearinghouse rejections, insurance denials, and payment discrepancies. Experience correcting and resubmitting claims, researching unpaid claims, or assisting with appeals and reconsiderations. Familiarity with electronic clearinghouses, payer portals, electronic health records, or practice management systems. Knowledge of Medicare, Medicaid, commercial insurance, managed care plans, and payer billing requirements. Familiarity with ICD-10-CM, CPT, and HCPCS coding concepts. Medical billing certification, such as Certified Professional Biller (CPB), or medical coding certification, such as Certified Professional Coder (CPC). Experience working in a Tribal Health, Indian Health Service (IHS), community health center, or similar healthcare setting. CERTIFICATES, LICENSES, AND/OR REGISTRATIONS: Medical billing or coding certification is preferred but not required. KNOWLEDGE, SKILLS, AND ABILITIES: Ability to research and resolve claim rejections, denials, and billing discrepancies. Ability to learn payer-specific correction, resubmission, reconsideration, and appeal requirements. Strong organizational, analytical, and problem-solving skills. Effective written and verbal communication skills. Ability to recognize recurring billing issues and communicate potential solutions. Ability to maintain accurate records and protect confidential patient information. Proficiency with standard computer applications, including Microsoft Word and Excel, and the ability to learn designated billing systems and electronic clearinghouse tools. Ability to work independently, manage competing priorities, meet deadlines, and seek assistance when necessary. Ability to coordinate professionally with internal departments and external insurance representatives. PLEASE NOTE: P.L. 93-638, Indian Preference and Tribal Employment Rights Ordinance, (TERO), will be practiced, however all qualified applicants will be considered. IF YOU ARE INTERESTED . click apply for full job details

Description: About Us: Active Security designs, develops, implements, and sustains advanced C5ISR and security solutions to enhance defense and mission capabilities, addressing threats across physical, electronic, cyber, and communications security for commercial and U.S. Government clients. Our Electronics Technicians are essential in installing, programming, maintaining, and repairing these complex systems in high-security environments, ensuring compliance with codes, client specifications, and internal standards. With a structured career path, technicians have continuous opportunities for skills development, advancing from foundational technical expertise to leadership roles. Job Summary: The Electronic Security Technician II can operate independently, bringing several years of experience to the field with the ability to perform installations, maintenance, troubleshoot complex issues, lead smaller projects, and assist in training junior technicians. Technicians at this level are expected to have an intermediate understanding of security systems and networking fundamentals, demonstrate critical problem-solving skills and take on additional responsibilities in project tasks and client engagement. Requirements: Responsibilities: System Installation & Maintenance: Install, configure, and maintain complex security system components and infrastructure with minimal supervision, ensuring that systems function according to design specifications. Technical Tasks: Perform complex troubleshooting and diagnostics, including advanced programming and system integration tasks, independently and collaboratively resolving complex issues on-site. Training & Mentorship: Lead installations and support junior technicians by providing guidance, technical training, and supervising their fieldwork to ensure quality standards. Customer Engagement: Interface directly with clients on-site, offering operational training, fielding questions, and ensuring satisfaction with services provided. Documentation: Complete required job documentation and ensure compliance with industry and internal standards such as ISO-9001, CMMI II, and DCAA. Qualifications: Education & Skills: Graduate; ability to work in a team environment; completion of at least two industry-recognized certifications. Experience: Minimum of 3 years in electronic security, with knowledge of government and independent certification requirements. Professional Development: Stay current with compliance standards and certifications, network concepts, and industry best practices. Commitment to continuing education. Travel Ability: Ability to travel to projects and stay overnight for varying lengths of time preferred but not required. Physical Demands & Work Environment: The role demands a high level of professionalism, adaptability, and organizational skills. Technicians must handle prolonged tasks, ability to handle up to 50 pounds, ability to work at heights, and work in diverse environments. This role may involve exposure to varying weather conditions and requires adherence to safety protocols. The position requires maintaining company-issued tools and equipment. General Requirements for All Levels: Communication: Strong oral and written skills to interact with peers, supervisors, and clients. Analytical Skills: Detail-oriented, capable of diagnosing and solving problems. Screening Requirements: Candidates must pass a background check, have a valid driver's license, and be eligible for U.S. Government Security Clearance. Requirement for Government Roles: This position requires the ability to obtain and maintain unescorted base access and a Common Access Card (CAC). Government eligibility criteria exclude individuals with felony convictions or misdemeanor convictions involving domestic violence or child endangerment. Equal Employment Opportunity Statement Active Security Consulting LLC (ASC) is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law. As a federal contractor, ASC complies with applicable equal employment opportunity and affirmative action requirements, including those relating to protected veterans and individuals with disabilities. Employment decisions are based on qualifications, merit, and business needs. Compensation details: 27-38 Hourly Wage PIb0a737f21cd0-0175

Job Description Job Description Job description Must be comfortable with a lot of travel. Candidates will need to be working out of different locations within a 72 hour notice. Client will provide all travel arrangements. Position summary The Traveling Data Center Installation Technician travels to customer sites to support new data center launches, expansions, and equipment deployments. The technician receives, moves, assembles, positions, and equips server racks and cabinets, also referred to as data towers, according to approved layouts and instructions. The position supports safe, accurate project completion through component installation, cable routing, inventory control, quality checks, and installation records. Essential duties and responsibilities Receive, unpack, inspect, and stage racks, servers, network equipment, cables, and installation materials. Report shortages, damage, and discrepancies. Move and position racks and cabinets using approved rack movers, pallet jacks, lifting devices, and team handling methods. Verify placement against floor plans and measurements. Assemble racks and install rails, brackets, shelves, panels, and cable management hardware using appropriate tools and specified torque requirements. Mount servers and authorized components in designated rack positions following installation drawings, manufacturer instructions, and customer standards. Route, secure, dress, and label copper and fiber cables; make approved connections while protecting cable bend radius, connectors, airflow, and service access. Perform assigned visual inspections and basic installation or connectivity checks within the technician's training and authorization. Escalate defects and technical issues to qualified personnel. Record asset identifiers, serial numbers, rack locations, completed tasks, and discrepancies in inventory systems, work orders, and installation checklists. Coordinate with deployment leads, customer representatives, warehouse teams, and technical staff to sequence work and meet project milestones. Follow site access, confidentiality, asset protection, and data security requirements. Use required personal protective equipment and electrostatic discharge controls. Follow applicable equipment handling, electrical safety, and energy isolation procedures. Stop and report unsafe work. Operate powered material handling equipment only after required training and site authorization. Use mechanical assistance and team handling for heavy or awkward equipment. Maintain clean, organized work areas, remove packaging, and segregate waste under site procedures. Complete handoff records and support resolution of installation punch list items. Perform related deployment or assigned home site duties consistent with training and business needs. Scope of authorized work Electrical circuit installation energized electrical work, equipment energization, and advanced server or network configuration require separately qualified and authorized personnel. This role performs only tasks within the approved project scope and the employee's training. Required qualifications High school diploma or equivalent, or equivalent relevant training and experience. At least one year of related experience in data center deployment, server rack assembly, hardware installation, electronics assembly, structured cabling, or comparable equipment installation. Ability to read work instructions, rack elevations, floor plans, diagrams, part numbers, and installation checklists. Ability to use hand tools, approved power tools, and measuring devices safely and accurately. Basic computer skills for inventory transactions, work orders, email, and project documentation. Ability to travel for extended assignments and work assigned schedules, including nights, weekends, and overtime when required. Strong attention to detail, dependable attendance, clear communication, and ability to collaborate with different site teams. Preferred qualifications Experience in customer data centers or large-scale technology deployment environments. Familiarity with server components, rack hardware, copper and fiber cabling, asset tracking, and electrostatic discharge precautions. Relevant technical training or certifications such as CompTIA A+, structured cabling training, or material handling equipment training. Travel and scheduling expectations This traveling field position requires frequent overnight travel and temporary assignments away from the employee's home location. Travel percentage, assignment duration, reporting location, and work schedules will be communicated before deployment and may change with customer project needs. Between deployments, employees may support an approved local site in related operational duties. Travel arrangements, lodging, eligible expenses, and applicable allowances follow the approved company travel policy. Employees must accurately record all work and travel time as instructed. Travel time and overtime will be paid as required by applicable law and company policy. Physical demands and work environment Essential functions involve prolonged standing and walking, bending, kneeling, reaching, handling tools and small components, and pushing or pulling equipment with approved aids. Work may include lifting and carrying components up to 50 pounds, and accessing racks from approved platforms or ladders. Heavy or awkward items require mechanical assistance or team handling. Specific lifting limits and task frequencies must be confirmed through the site job assessment. Work occurs in data centers, staging areas, and warehouse or active deployment environments with equipment noise, temperature variation, restricted access, and nearby material handling activity. Employees must follow applicable site safety rules. Essential functions may be performed with or without reasonable accommodation. Performance expectations Complete installations accurately and within agreed project milestones. Maintain reliable asset and task records, promptly report discrepancies, and minimize avoidable damage and rework. Demonstrate safe work practices, protect customer assets and information, and communicate respectfully with colleagues and customers.

Job Description Job Description o Design, install, and maintain cost-effective two-way radio communication systems according to customer needs and/or provided specifications. o Troubleshoot, repair, and program RF equipment including repeaters, voters, dispatch consoles, RoIP gateways, in-building wireless (BDA/DAS) systems, microwave links, hand-held portable radios, mobile radios, and pagers. o Troubleshoot and repair common electronic devices including power supplies, inverters, antenna/cabling systems, electronic surveillance devices, and public address audio systems. o Tune duplexers and combiners according to system specifications. o Conduct RF signal strength testing for pre/post enhancement of in-building wireless communication systems. o Configure routers and troubleshoot IT network problems as required to maintain communication systems. o Update and maintain accurate antenna mapping at tower sites. o Troubleshoot remote monitoring systems installed at tower sites including FAA tower lighting, generators, HVAC equipment, and security cameras/alarms. o Provide technical support of sales calls and in-person meetings with customers. o Assess viability of new product lines and services with respect to market needs and profitability. o Supervise, with other technical staff, the daily work and career development of junior RF technicians/apprentices. o Update technical documents in compliance with company policies. o Maintain work area in a clean and organized manner

Job Description Job Description About Vortex IT Systems Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Electronic Security Technician II to join our field operations team. This position is ideal for a skilled technician who can independently install, configure, troubleshoot, and service electronic security systems while maintaining high standards of workmanship, safety, and customer satisfaction. This is not an entry-level position. We are looking for a hands-on professional with at least four years of relevant experience who is comfortable managing assigned installations and service calls with minimal supervision. Key Responsibilities 1. Video Surveillance & CCTV Systems Install, configure, maintain, and troubleshoot IP security cameras, NVRs, and video management systems. Install dome, bullet, turret, PTZ, and other commercial surveillance cameras. Configure IP addressing, PoE switches, recording schedules, motion detection, and remote access. Troubleshoot video loss, network connectivity, storage, and recording issues. Optimize camera positioning, image quality, and coverage. Perform system testing, commissioning, and customer demonstrations. Work with platforms such as Uniview, UniFi Protect, Axis, Hanwha, Hikvision, or equivalent systems. 2. Electronic Access Control Systems Install, wire, configure, and service electronic access control systems. Install card readers, keypads, controllers, magnetic locks, electric strikes, door contacts, and request-to-exit devices. Configure access permissions, credentials, schedules, door groups, and user accounts. Troubleshoot door controllers, relays, power supplies, locking hardware, and communication failures. Integrate access control equipment with existing network infrastructure. Perform functional testing and commissioning, including verification of required emergency egress and life-safety functions. Work with platforms such as UniFi Access, Uniview, HID, Mercury-based systems, Genetec, or equivalent solutions. 3. Burglar Alarm & Intrusion Detection Systems Install, program, test, maintain, and troubleshoot intrusion detection systems. Install alarm control panels, keypads, motion detectors, door/window contacts, glass-break detectors, and sirens. Configure alarm zones, user codes, entry/exit delays, and communication modules. Diagnose alarm faults, false alarms, sensor failures, and communication problems. Perform system testing, commissioning, and customer training. Experience with DSC, Honeywell/Resideo, Qolsys, Bosch, DMP, or equivalent systems is preferred. 4. Low-Voltage Cabling & Installation Install and terminate Cat5e/Cat6, security, and other low-voltage cabling. Install conduit, raceways, cable supports, junction boxes, and equipment enclosures. Read and interpret construction drawings, wiring diagrams, and technical documentation. Use cable testers, multimeters, network diagnostic tools, and standard installation equipment. Maintain professional cable management, labeling, and installation standards. Follow applicable electrical, building, fire, and life-safety codes. 5. Troubleshooting, Service & Customer Support Independently diagnose and resolve security system hardware, software, wiring, and network issues. Perform service calls, equipment replacements, preventive maintenance, and system upgrades. Complete assigned installations and service tasks efficiently and professionally. Maintain accurate service reports, installation documentation, and equipment records. Communicate project updates, technical findings, and recommendations to customers and management. Provide customer training on installed security systems. Coordinate with project managers, other technicians, and subcontractors when necessary. Required Qualifications Minimum 4 years of professional experience installing, servicing, or troubleshooting electronic security systems. Strong hands-on experience with IP video surveillance systems. Practical experience installing, wiring, and configuring electronic access control systems. Working knowledge of burglar alarm and intrusion detection systems. Ability to independently complete standard security installations and service calls. Solid understanding of TCP/IP networking, IP addressing, PoE, and network switches. Ability to troubleshoot low-voltage electrical circuits, relays, power supplies, and field devices. Ability to read and interpret wiring diagrams, equipment manuals, and construction plans. Proficiency with common installation tools, cable testers, and multimeters. Valid driver's license and acceptable driving record. Ability to lift up to 50 pounds and safely work on ladders or lifts when properly trained. Strong communication, problem-solving, organizational, and customer service skills. Ability to pass applicable background screening and satisfy customer site-access requirements. Preferred Qualifications Five or more years of security systems installation and service experience. Independent programming experience with commercial burglar alarm systems. Experience commissioning multi-door access control systems. Experience with Uniview, UniFi Protect, UniFi Access, Mercury, HID, Genetec, or similar platforms. Experience with DSC, Honeywell, Bosch, DMP, or Qolsys alarm systems. Understanding of commercial door hardware and electrified locking systems. Experience with VLANs, VPNs, remote access, and advanced network troubleshooting. Experience with commercial, industrial, and multifamily residential security projects. Manufacturer certifications, OSHA 10, or aerial lift certification. Ability to identify installation deficiencies and recommend practical technical solutions. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team. Company Description Vortex IT Systems, LLC is a growing technology and security solutions provider serving commercial, industrial, multifamily residential, and business clients throughout Central Ohio. We specialize in IP video surveillance, electronic access control, burglar alarm systems, structured cabling, networking, and integrated technology solutions. As demand for our security installation and service solutions continues to grow, we are seeking an experienced Security Systems Technician II to join our field operations team.

Job Description Job Description Senior Physical Electronic Security Technician - Data Centers Location: North Carolina Department: Physical Security / Critical Infrastructure Employment Type: Full-Time Position Summary We are seeking an experienced Senior Physical Electronic Security Technician with extensive expertise in enterprise electronic security systems, specifically the LenelS2 OnGuard platform, to install and commision critical security infrastructure within new construction data center environments. The ideal candidate will possess deep technical knowledge of integrated access control, IP video surveillance, intrusion detection, intercom systems, and security networking. This individual will lead installation, commissioning, troubleshooting, preventative maintenance, and lifecycle upgrades while ensuring the highest standards of security, reliability, and compliance expected within hyperscale and enterprise data centers. This role requires a technician who can work independently, lead field activities, mentor junior technicians, and interact professionally with customers, vendors, project managers, and security operations teams. Key Responsibilities Electronic Security Systems Install, commission, troubleshoot, and maintain enterprise electronic security systems. Perform basic programming, configuration, and diagnostics of Lenel OnGuard access control systems. Configure and maintain: Intelligent Controllers Access panels Card readers Electric locking hardware Request-to-exit devices Door position switches Elevator control integrations Maintain enterprise IP video surveillance platforms and associated hardware. Configure camera networks, recording servers, storage systems, and video analytics. Diagnose hardware, firmware, software, and communication failures. Data Center Security Infrastructure Support physical security systems protecting mission-critical data center facilities. Maintain strict compliance with customer security standards and change management processes. Work within highly controlled production environments with zero-tolerance for unnecessary downtime. Perform maintenance activities while minimizing operational impact. Understand redundancy requirements for: Controllers Network infrastructure Power systems Security servers Support security upgrades during maintenance windows. Systems Integration Integrate security platforms with: Video Management Systems (VMS) Intrusion Detection Systems (IDS) Visitor Management Systems Building Management Systems (BMS) Fire Alarm Interfaces Configure TCP/IP communications between enterprise security devices. Troubleshoot network communication issues involving switches, VLANs, PoE, and fiber infrastructure. Installation & Commissioning Lead field installation activities for new security deployments. Read and interpret: Construction drawings Security risers Wiring diagrams Floor plans Sequence of operations Install and terminate: Cat6 Fiber optic cabling Composite security cable RS-485 communications Low-voltage power circuits Perform commissioning, acceptance testing, and system turnover. Maintenance & Service Perform preventative maintenance inspections. Respond to emergency service calls. Diagnose complex system failures. Replace defective hardware. Perform firmware and software upgrades. Document repairs and maintain accurate service records. Leadership Mentor junior technicians. Lead small installation and service teams. Coordinate with project managers and security operations personnel. Provide technical guidance during complex troubleshooting activities. Ensure installations meet company quality standards and applicable codes. Required Qualifications 5+ years of experience installing and servicing enterprise electronic security systems. 3+ years of experience with Lenel OnGuard . Extensive experience supporting security systems in mission-critical data center environments. Strong understanding of: Access Control IP Video Surveillance Intrusion Detection Security Networking Low Voltage Systems Experience with enterprise security server architecture. Strong knowledge of: TCP/IP networking VLANs PoE Fiber optics Windows Server environments SQL fundamentals Ability to independently diagnose complex hardware and software issues. Experience working under formal change control procedures. Ability to read electrical and low-voltage construction drawings. Excellent customer communication and documentation skills. Preferred Qualifications Current LenelS2 OnGuard Certification (Associate, Professional, or Expert) Experience with: Genetec Security Center Milestone XProtect Avigilon Control Center Honeywell Pro-Watch Software House C•CURE 9000 Experience with intelligent locking hardware from manufacturers such as: ASSA ABLOY Allegion Knowledge of data center operational standards. OSHA 10 or OSHA 30 certification. Manufacturer certifications for enterprise access control or VMS platforms. Experience working in hyperscale cloud data centers. Technical Skills Enterprise Access Control Lenel OnGuard Administration Intelligent Controllers IP Camera Systems Video Management Systems Fiber Optic Installation Low Voltage Cabling Door Hardware Integration Network Troubleshooting TCP/IP SQL Databases Windows Server Power Supplies UPS Systems Security Networking System Commissioning Preventative Maintenance Root Cause Analysis Physical Requirements Lift up to 50 pounds. Work from ladders and lifts. Travel between customer sites as required. Work in active construction and mission-critical operational environments. Ability to participate in after-hours maintenance windows and on-call rotations. What Success Looks Like The successful candidate consistently delivers reliable, high-quality electronic security solutions with minimal disruption to critical operations. They serve as the technical expert for Lenel OnGuard systems, proactively resolve complex issues, ensure compliance with data center security standards, and provide leadership that enhances team performance and customer confidence. Company Description At Justified Technology, we believe our people are our greatest strength. We foster a collaborative, supportive culture where every team member is valued, respected, and empowered to succeed. From leadership to the field, we encourage open communication, continuous learning, and teamwork, ensuring employees have the resources and support they need to grow professionally. We are committed to creating an inclusive workplace built on equality, where diverse perspectives are welcomed, opportunities are earned through merit, and everyone is treated with fairness and respect. Our culture is centered on integrity, accountability, and helping one another succeed-making Justified Technology a place where careers thrive and people enjoy coming to work. Company Description At Justified Technology, we believe our people are our greatest strength. We foster a collaborative, supportive culture where every team member is valued, respected, and empowered to succeed. From leadership to the field, we encourage open communication, continuous learning, and teamwork, ensuring employees have the resources and support they need to grow professionally. We are committed to creating an inclusive workplace built on equality, where diverse perspectives are welcomed, opportunities are earned through merit, and everyone is treated with fairness and respect. Our culture is centered on integrity, accountability, and helping one another succeed-making Justified Technology a place where careers thrive and people enjoy coming to work.

Job Description Job Description Duration: 4+ Months Duties: Lays out, assembles, pre-fits, and bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins, or equipment. Follows engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required. Cuts parts or materials to size. Operates autoclave, hydraulic presses, and ovens to complete the bonding cycle. Sands, burrs and smoothes over areas. Applies sealing resins to cut or exposed edges. Process methods and sequences vary depending on compounds, contours and Client-up transitions. May perform complicated rework or repair. May monitor and verify quality in accordance with controlled procedures. Utilize Client-up tools, which include both optical and hard tools, in the fabrication of composite and metal assemblies. Obtain required information from prints, charts, sketches, work orders, documents, verbal and electronic information. Use shop mathematics and precision measuring instruments to complete work assignments. Must verify work performed is per work instruction and meets process and/or engineering specification. Ensure equipment and tool certification occurs per procedure. Use and control of solvents and cleaning solutions in the preparation of details, tools, and assemblies for bonding and paint per established procedures. Perform routine minor machine maintenance as part of their daily work duties Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, moves product to the next operation within a building. Support the continuous flow of product within the manufacturing process by training and assisting employees at all classification levels. 2 years' minimum experience in aviation production or equivalent. Previous experience with Client-ups, assembling, pre-fitting, and bonding a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment. Must be able and willing to work any shift to include working overtime as needed. Preferred- 5+ years minimum experience in aviation production. Required Skills: Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations Must have basic skills of using a variety of tools Good verbal and written communication skills in English. Ability to articulate complex issues to others. Ability to maintain confidentiality in all matters is essential. Demonstrated effectiveness in interpersonal skills. Preferred Technical Systems Proficiency: Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Education Required: High School Diploma/GED or WorkKeys Assessment completion The ability to successfully complete the following training provided by Airbus after recruitment: Health & Safety General aircraft familiarization Quality Training Preferred: Training from a vocational school or previous employer in the use of composite Client-ups and fabrication. Company Description 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Founded in 1997, TSCTI is a Certified National Minority Business Enterprise (MBE) with a workforce of 6,000+ professionals, including 600+ Cybersecurity Subject Matter Experts (SMEs), delivering mission-critical solutions across all 50 U.S. states, Canada, and Mexico. Headquartered in Princeton, NJ, and McLean, VA, with 14 regional offices nationwide, TSCTI provides comprehensive solutions in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, IT Infrastructure, Enterprise Modernization, DevSecOps, Managed Services, Workforce Solutions, and Healthcare Staffing. We are a trusted partner to Federal, State, Local, Education (SLED), Healthcare, and Commercial organizations, delivering innovative technology and talent solutions that enable our clients to achieve their strategic objectives. As one of the nation's leading Healthcare Workforce Solutions providers, TSCTI supports federal healthcare systems, Veterans Affairs (VA) Medical Centers, state and local healthcare agencies, hospitals, clinics, laboratories, long-term care facilities, and commercial healthcare organizations. We recruit and place highly qualified healthcare professionals across a wide range of specialties, including physicians, advanced practice providers, registered nurses, allied health professionals, behavioral health specialists, laboratory personnel, pharmacy professionals, and healthcare administrative staff. Our healthcare solutions ensure continuity of care while maintaining the highest standards of clinical excellence and regulatory compliance. With a strong commitment to quality and compliance, TSCTI operates through CMMI Level 3 (Development & Services) and ISO 9001, ISO 20000, and ISO 27001 certified processes, ensuring consistent service excellence, operational maturity, and information security. Today, we proudly support 14 of the 15 Federal Executive Departments, 37 Federal agencies, 50 State governments, 115+ Local agencies, 37 School Districts, numerous healthcare organizations, and 80+ Fortune 500 and commercial clients. TSCTI has earned numerous industry recognitions, including being named among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and a 13-time Inc. 5000 honoree. The company has also been recognized by the Washington Business Journal as one of the Best Places to Work and continues to expand its capabilities through strategic innovation, acquisitions, and investments in emerging technologies. At TSCTI, our people are our greatest strength. We are committed to fostering an inclusive, collaborative, and growth-oriented workplace where innovation thrives and careers flourish. Whether delivering cutting-edge technology solutions or connecting exceptional talent with meaningful careers, we consistently exceed our clients' expectations while empowering our employees to succeed. Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Company Description 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Founded in 1997, TSCTI is a Certified National Minority Business Enterprise (MBE) with a workforce of 6,000+ professionals, including 600+ Cybersecurity Subject Matter Experts (SMEs), delivering mission-critical solutions across all 50 U.S. states, Canada, and Mexico. Headquartered in Princeton, NJ, and McLean, VA, with 14 regional offices nationwide, TSCTI provides comprehensive solutions in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, IT Infrastructure, Enterprise Modernization, DevSecOps, Managed Services, Workforce Solutions, and Healthcare Staffing. We are a trusted partner to Federal, State, Local, Education (SLED), Healthcare, and Commercial organizations, delivering innovative technology and talent solutions that enable our clients to achieve their strategic objectives. As one of the nation's leading Healthcare Workforce Solutions providers, TSCTI supports federal healthcare systems, Veterans Affairs (VA) Medical Centers, state and local healthcare agencies, hospitals, clinics, laboratories, long-term care facilities, and commercial healthcare organizations. We recruit and place highly qualified healthcare professionals across a wide range of specialties, including physicians, advanced practice providers, registered nurses, allied health professionals, behavioral health specialists, laboratory personnel, pharmacy professionals, and healthcare administrative staff. Our healthcare solutions ensure continuity of care while maintaining the highest standards of clinical excellence and regulatory compliance. With a strong commitment to quality and compliance, TSCTI operates through CMMI Level 3 (Development & Services) and ISO 9001, ISO 20000, and ISO 27001 certified processes, ensuring consistent service excellence, operational maturity, and information security. Today, we proudly support 14 of the 15 Federal Executive Departments, 37 Federal agencies, 50 State governments, 115+ Local agencies, 37 School Districts, numerous healthcare organizations, and 80+ Fortune 500 and commercial clients. TSCTI has earned numerous industry recognitions, including being named among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and a 13-time Inc. 5000 honoree. The company has also been recognized by the Washington Business Journal as one of the Best Places to Work and continues to expand its capabilities through strategic innovation, acquisitions . click apply for full job details

Job Description Job Description Duration: 4+ Months Duties: Lays out, assembles, pre-fits, and bonds a variety of metal, composite or laminate fabrications, assemblies, parts, skins, or equipment. Follows engineering and manufacturing specifications and orders to determine parts to be bonded and the temperature and pressure required. Cuts parts or materials to size. Operates autoclave, hydraulic presses, and ovens to complete the bonding cycle. Sands, burrs and smoothes over areas. Applies sealing resins to cut or exposed edges. Process methods and sequences vary depending on compounds, contours and Client-up transitions. May perform complicated rework or repair. May monitor and verify quality in accordance with controlled procedures. Utilize Client-up tools, which include both optical and hard tools, in the fabrication of composite and metal assemblies. Obtain required information from prints, charts, sketches, work orders, documents, verbal and electronic information. Use shop mathematics and precision measuring instruments to complete work assignments. Must verify work performed is per work instruction and meets process and/or engineering specification. Ensure equipment and tool certification occurs per procedure. Use and control of solvents and cleaning solutions in the preparation of details, tools, and assemblies for bonding and paint per established procedures. Perform routine minor machine maintenance as part of their daily work duties Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, moves product to the next operation within a building. Support the continuous flow of product within the manufacturing process by training and assisting employees at all classification levels. 2 years' minimum experience in aviation production or equivalent. Previous experience with Client-ups, assembling, pre-fitting, and bonding a variety of metal, composite or laminate fabrications, assemblies, parts, skins or equipment. Must be able and willing to work any shift to include working overtime as needed. Preferred- 5+ years minimum experience in aviation production. Required Skills: Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations Must have basic skills of using a variety of tools Good verbal and written communication skills in English. Ability to articulate complex issues to others. Ability to maintain confidentiality in all matters is essential. Demonstrated effectiveness in interpersonal skills. Preferred Technical Systems Proficiency: Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Education Required: High School Diploma/GED or WorkKeys Assessment completion The ability to successfully complete the following training provided by Airbus after recruitment: Health & Safety General aircraft familiarization Quality Training Preferred: Training from a vocational school or previous employer in the use of composite Client-ups and fabrication. Company Description 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Founded in 1997, TSCTI is a Certified National Minority Business Enterprise (MBE) with a workforce of 6,000+ professionals, including 600+ Cybersecurity Subject Matter Experts (SMEs), delivering mission-critical solutions across all 50 U.S. states, Canada, and Mexico. Headquartered in Princeton, NJ, and McLean, VA, with 14 regional offices nationwide, TSCTI provides comprehensive solutions in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, IT Infrastructure, Enterprise Modernization, DevSecOps, Managed Services, Workforce Solutions, and Healthcare Staffing. We are a trusted partner to Federal, State, Local, Education (SLED), Healthcare, and Commercial organizations, delivering innovative technology and talent solutions that enable our clients to achieve their strategic objectives. As one of the nation's leading Healthcare Workforce Solutions providers, TSCTI supports federal healthcare systems, Veterans Affairs (VA) Medical Centers, state and local healthcare agencies, hospitals, clinics, laboratories, long-term care facilities, and commercial healthcare organizations. We recruit and place highly qualified healthcare professionals across a wide range of specialties, including physicians, advanced practice providers, registered nurses, allied health professionals, behavioral health specialists, laboratory personnel, pharmacy professionals, and healthcare administrative staff. Our healthcare solutions ensure continuity of care while maintaining the highest standards of clinical excellence and regulatory compliance. With a strong commitment to quality and compliance, TSCTI operates through CMMI Level 3 (Development & Services) and ISO 9001, ISO 20000, and ISO 27001 certified processes, ensuring consistent service excellence, operational maturity, and information security. Today, we proudly support 14 of the 15 Federal Executive Departments, 37 Federal agencies, 50 State governments, 115+ Local agencies, 37 School Districts, numerous healthcare organizations, and 80+ Fortune 500 and commercial clients. TSCTI has earned numerous industry recognitions, including being named among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and a 13-time Inc. 5000 honoree. The company has also been recognized by the Washington Business Journal as one of the Best Places to Work and continues to expand its capabilities through strategic innovation, acquisitions, and investments in emerging technologies. At TSCTI, our people are our greatest strength. We are committed to fostering an inclusive, collaborative, and growth-oriented workplace where innovation thrives and careers flourish. Whether delivering cutting-edge technology solutions or connecting exceptional talent with meaningful careers, we consistently exceed our clients' expectations while empowering our employees to succeed. Equal Opportunity Employer 22nd Century Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Company Description 22nd Century Technologies, Inc. (TSCTI) is one of the fastest-growing IT Services Integrators and Workforce Solutions providers in the United States. Founded in 1997, TSCTI is a Certified National Minority Business Enterprise (MBE) with a workforce of 6,000+ professionals, including 600+ Cybersecurity Subject Matter Experts (SMEs), delivering mission-critical solutions across all 50 U.S. states, Canada, and Mexico. Headquartered in Princeton, NJ, and McLean, VA, with 14 regional offices nationwide, TSCTI provides comprehensive solutions in Digital Transformation, Artificial Intelligence (AI), Cybersecurity, Cloud Computing, IT Infrastructure, Enterprise Modernization, DevSecOps, Managed Services, Workforce Solutions, and Healthcare Staffing. We are a trusted partner to Federal, State, Local, Education (SLED), Healthcare, and Commercial organizations, delivering innovative technology and talent solutions that enable our clients to achieve their strategic objectives. As one of the nation's leading Healthcare Workforce Solutions providers, TSCTI supports federal healthcare systems, Veterans Affairs (VA) Medical Centers, state and local healthcare agencies, hospitals, clinics, laboratories, long-term care facilities, and commercial healthcare organizations. We recruit and place highly qualified healthcare professionals across a wide range of specialties, including physicians, advanced practice providers, registered nurses, allied health professionals, behavioral health specialists, laboratory personnel, pharmacy professionals, and healthcare administrative staff. Our healthcare solutions ensure continuity of care while maintaining the highest standards of clinical excellence and regulatory compliance. With a strong commitment to quality and compliance, TSCTI operates through CMMI Level 3 (Development & Services) and ISO 9001, ISO 20000, and ISO 27001 certified processes, ensuring consistent service excellence, operational maturity, and information security. Today, we proudly support 14 of the 15 Federal Executive Departments, 37 Federal agencies, 50 State governments, 115+ Local agencies, 37 School Districts, numerous healthcare organizations, and 80+ Fortune 500 and commercial clients. TSCTI has earned numerous industry recognitions, including being named among Forbes America's Best Large Employers, Forbes Best Employers for Veterans, Forbes Best Employers for Tech Workers, Newsweek's America's Greatest Workplaces for Diversity, and a 13-time Inc. 5000 honoree. The company has also been recognized by the Washington Business Journal as one of the Best Places to Work and continues to expand its capabilities through strategic innovation, acquisitions . click apply for full job details

Job Description Job Description Job Title: Data Center Technician 4 10-hour Shifts - Nights, Specific Days TBD Location: On-Site, Reporting to Ashburn, VA Pay Rate: $60/hr. W2. Benefits available Position Type: Multi-year Contract Description The Data Center Technician will coordinate, monitor, administer, and service technical environments. The role completes implementations, carries out integration activities, and provides operational support for technical environments. A Network Administrator Operator manages and maintains an organization's network infrastructure, ensuring security and performance Experience with routers, switches, and firewalls Strong problem-solving and communication skills Basic Purpose - Network and Server Installations and Maintenance Provide on-site technical support for the client's data center and equipment to ensure continuous availability. Perform troubleshooting, escalations, and resolve incidents and problems when detected. Interface with various support teams and vendors to ensure appropriate resolution during system outages or periods of reduced performance. Able to innovate and make decisions on his/her own but also know how to take direction when it is given, paying attention to all details involved. Responsibilities Network installation & maintenance (rack & stack, cabling, parts replacement, etc.) - Basic/Routine Server installation & maintenance (rack & stack, HDD, memory, CPU, RAID batteries, NICs, etc.) - Basic/Routine Data Center staging, deployment, and logistics/asset management support - Basic/Routine Site builds & refreshes, while meeting current quality standards- Basic/Routine Data Center hardware break/fix/move/add/change ; component replacement, hardware troubleshooting- Basic/Routine Extensive enterprise cable installation experience as well as industry cabling standards- Basic/Routine Ability to provide adequate fiber and copper cable testing with minimal supervision- Basic/Routine Ability to terminate Cat 6 cabling- Basic/Routine Create/update/maintain rack elevations within a DCIM application (Nlyte) -Participates in Maintain inventory control and documentation on systems and components to ensure updates occur according to schedule and procedure -Participates in Troubleshoot and escalate incidents and problems- Basic/Routine Interface with other ISD areas and/or vendors to resolve outages or periods of reduced performance, in accordance with established criteria- Basic/Routine Provide status reports on active or resolved issues -Participates in Maintain, configure, and perform preventative maintenance to various network and data center equipment to ensure efficient operations- Basic/Routine Experience with out-of-band management/KVM system (DSVIEW) - Basic/Routine Experience with power distribution units (PDUs), load management - Basic/Routine Familiar with NEMA and IEC power connectors- Basic/Routine Familiar with Data Center containment solutions- Basic/Routine Work with others to update and document procedures -Participates in Write and maintain detailed site reference documentation -Participates in Cognizant of Data Center Safety Standards - Basic/Routine Lift equipment weighing 50 lbs. - Basic/Routine Perform other tasks or duties as assigned or based on need- Basic/Routine Qualifications - knowledge, skills, and abilities Intermediate Data Center / IT Operations experience Software & Hardware tools utilized to perform day-to-day Data Center functions Knowledge of LAN/WAN topologies, protocols, and standards Must exhibit excellent communication and grammatical skills Demonstrated analytical and problem-solving skills Ability to work in an environment that operates 24/7 with an ability to participate in on-call rotation and provide after-hours support as needed Ability to work independently and as part of a team Ability to work under pressure (urgent problems, deadlines, changing priorities) Familiar with network cabling (types, distance limitations, testing, connectors, handling) Familiar with electrical & optical transceivers (SFP+, QSFP+, GLCT, DAC, CFP2, DWDM) Familiar with server hardware and components Familiar with electrical standards, connector types, power budget calculations, AC vs. DC, single-phase vs. three-phase, etc. Familiar with datacenter design in relation to heat dissipation and airflow Meticulous and obsessive about organized cabling Detail-oriented and organized Desired Bachelor's degree in Information Technology or the equivalent combination of training, education, and experience Experience and technical training in WAN/LAN communications including experience installing, basic configuring, and maintaining Cisco routers and switches Experience in presenting technical solutions and/or recommendations Knowledge of electronic principles as they relate to diagnosing and troubleshooting IT system issues Knowledge of technical inter-relationships between software/hardware and desktop/LAN/Host systems Advanced skill in diagnosing and troubleshooting issues Advanced research, analytical, and problem-solving skills Knowledge of client operations System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref:

Job Description Job Description Note: This role is full - time 40 hours per week and will require support (5pm -10pm) on Tuesdays and Wednesday Target Salary $118K Location: Suitland, MD Candidate must be able to obtain Public Trust (federal government background investigation, with eligibility requirement - US Citizen) Data Center Hardware & Cabling Engineer ActioNet has an opening for an experienced, hands-on Data Center Hardware & Cabling Enginee r to join our infrastructure team. This role ensures that our servers, networking gear, and storage systems are installed, organized, and tracked. The candidate will work with team members who possess diverse backgrounds (systems engineering, system administration) and will be part of a Government Contractor Team working at Census Data Center in Bowie, MD. If you take pride in a perfectly dressed server rack and find satisfaction in a 100% accurate asset database, you'll fit right in. Key Responsibilities 1. Hardware Deployment & Maintenance Rack & Stack: Physically install, bolt, and secure servers, switches, and PDUs into high-density racks. Component Replacement: Perform "smart hands" tasks including swapping failed DIMMs, CPUs, hard drives, and power supplies. Troubleshooting: Diagnose physical layer issues and work with remote engineering teams to restore service. Must be available weekends and evenings 25% of the year. 2. Cable Management Installation: Install and maintain structured cabling in a datacenter environment including Cat 5, Cat 6 and Fiber optic network cabling, including termination of Fiber and Copper. Must be able to work evening shifts on Tuesday and Wednesday. Organization: Implement cable dressing standards to ensure airflow and maintainability. Establish network connection through accurate documentation and communication with Telecommunication offices. Labeling: Maintain a rigorous labeling convention for every cable at both termination points to ensure "traceability" without manual hunting. 3. Asset & Inventory Management Lifecycle Tracking: Utilize DCIM (Data Center Infrastructure Management) tools to track equipment from "dock to grave." Auditing: Conduct regular physical audits to ensure the digital inventory matches the physical reality of the floor. Perform general datacenter walkthroughs. RMA Management: Handle the shipping and receiving of defective parts, ensuring all serial numbers are logged and warranties are leveraged. Required Skills & Qualifications Physical Stamina: Ability to lift up to 50 lbs and work on ladders or in confined spaces for extended periods. Technical Knowledge: Deep understanding of TIA/EIA cabling standards, fiber polarity, and connector types (LC, SC, MPO). Tool Proficiency: Expert use of cable testers (Fluke), label makers, and basic power tools. Organization: Must present an eye for detail regarding cable routing and database accuracy for Datacenter and Computer Room Assets. Must be able to maintain electronic records on datacenter infrastructure. Education/Experience: 2+ years of experience in a production data center environment or a degree in a relevant technical field. Certifications Required - Certified Network Cable Installer (CNCI ) or BISCI Technician Certification or higher Nice to Have - CompTIA Server+ or Network+ ActioNet is a CMMI-DEV Level 4, CMMI-SVC Level 4, ISO 20000, ISO 27001, ISO 9001, HDI-certified, woman-owned IT Solutions Provider with strong qualifications and expertise in Agile Software Engineering, Cloud Solutions, Cyber Security and IT Managed Services. With 26+ years of stellar past performance, ActioNet is the premier Trusted Innogrator! Core Capabilities: Advanced and Managed IT Services Agile Software Development DevSecOps Cybersecurity Health IT C4ISR & SIGINT Data Center Engineering & Operations Engineering & Installation Why ActioNet? At ActioNet, our Passion for Quality is at the heart of everything we do: Commitment to Employees: We are committed to making ActioNet a great place to work and continue to invest in our ActioNeters. Commitment to Customers: We are committed to our customers by driving and sustaining Service Delivery Excellence. Commitment to Community: We are committed to giving back to our community, helping others, and making the world a better place for our next generation. ActioNet is proud to be named a Top Workplace for the twelfth year in a row (2014 - 2025). We have a 98% customer retention rate. We are passionate about the inspirational missions of our customers, and we entrust our employees and teams to deliver exceptional performance to enable the safety, security, health, and well-being of our nation. What's in It For You? As an ActioNeter, you get to be part of an exceptional team and a corporate culture that nurtures mutual success for our customers, employees, and communities. We give you the tools to be successful; all you need to do is bring your best ideas, your energy, and a desire to develop your skills, experience, and career. Are you ready to make a difference? ActioNet is an equal-opportunity employer and values inclusion at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Full-Time Employees are eligible to participate in our ActioNet's Benefits Program: Medical Insurance Vision Insurance Dental Insurance Life and AD&D Insurance 401(k) Savings Plan Education and Professional Training Flexible Spending Accounts (FSA) Employee Referral and Merit Recognition Programs Employee Assistance and Identity Theft Protection Paid Holidays: 11 per year Paid Time Off (PTO) Disability Insurance ActioNet is an equal opportunity employer and value inclusion at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Direct Applicants, only. No Agencies, No third-party recruiters, please

Job Description Job Description Description: The Ascendancy Group is seeking an experienced Unamanned Systems (UxS) Technician with a Secret clearance that is TS/SCI eligible. Requirements: • Secret Clearance - TS/SCI Eligible • B.S. in Electrical Engineering or Technician in an applicable engineering or science field. • Minimum of 3 years of hands-on professional experience with Degree or 7 years of experience without Degree. • FAA Part 107 or obtain within 6 months of employment. • Extensive knowledge in BetaFlight, ArduPilot, and PX4 - 5 years. • Extensive knowledge and hands on experience building drones- 5 years. • Knowledgeable in electronic propulsion and combustible power systems - 5 years. • Proficient in building, testing, and troubleshooting electrical and mechanical assemblies. This includes knowledge of analog and digital circuits, AC/DC electronics, and the ability to use test equipment, such as a multi meter, spectrum analyzer and oscilloscopes. • Knowledgeable and comfortable selecting electronic parts and sensors for various projects. • Technicians must be comfortable working in a shop environment with loud noises and industrial power tools. May be required to lift 50 lbs. • Adept, with power and hand tools for assembly and repairs. • Proficient using computer aided design (CAD) software for rapid proto-typing and additive manufacturing. • Hands on experience using various 3d printing technologies, such as FDM, SLS, SLA and strong understanding in selecting materiel e.g., PLA, PETG/ABS, and TPU. • Skilled in soldering and de-soldering electrical compo ents, including surface mounted devices (SMD) and various sensors. • Ability to perform routine maintenance, diagnose issues, and conduct repairs using technical manuals. This includes hardware assembly, troubleshooting common error messages, and primary/secondary/servicing. • Familiar with C, C++, and python. Ability to use developmental tools, including Integrated Development Environments (IDEs), compilers, and hardware debuggers, to compile firmware or troubleshoot low-level issues. The Ascendancy Group (TAG) was founded on and thrives based on relationships, reputation, and trust. We are passionate about everything we do. One hundred percent of our government-focused teammates are former members of the Department of War or the Intelligence Community who still believe in supporting our nation. We offer like-minded individuals the opportunity to continue working in small teams on unique and challenging problem sets that further our nation's security. If you possess the experience, qualifications and drive required for this position, please APPLY NOW for consideration!

Job Description Job Description Long Wall Company was created in 2024 to accelerate missile defense technology for the U.S. and our allies. We specialize in ballistic missile defense and are developing Cyclops, a low-cost, mass-producible interceptor. We also produce containerized launchers and offer low-cost targets for threat replication. The future of global security depends on defensive technology that redefines cost, magazine depth, and distribution to deter and defend against evolving threats. Join us. WHAT WE LOOK FOR Mission-Driven Problem Solvers - The problems in missile defense demand ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership - We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success. TEST AND OPERATIONS ENGINEER Test and Operations Engineers are the end users and final guardians of Long Wall hardware and engines before testing, and of the rocket before flight. Test and Operations Engineers oversee everything from hardware testing and vehicle integration to ground systems and payload processing. As a Test and Operations Engineer, you will aid in the development, implementation, and operation of test and launch systems at our Long Beach and El Segundo facilities, our test site in Mojave, and our launch sites. Responsibilities include preparing and operating sites and hardware for engine testing, launch ground system testing, flight hardware testing, and vehicle launch. This role requires a hands-on individual with meticulous attention RESPONSIBILTIIES: Develop, write, and review procedures to integrate hardware and test engines, ground systems, and the launch vehicle Perform test operations (e.g., control room operations) Own projects to design, upgrade, build and maintain Ground Support Equipment (GSE) Work alongside integration technicians build hardware and run operations Prepare and participate in reviews for design, test/operations readiness, and failure/safety analysis Lead or contribute to anomaly resolutions Provide launch and mission operations support Review test data and make go/no-go call on vehicle, test article, and GSE integrity Perform final vehicle closeouts and verify hardware is go for test or flight BASIC QUALIFICATIONS: Minimum of 1+ years of industry, project, or research experience in test/launch operations, hardware design/development, or manufacturing Bachelor's degree in Chemical, Mechanical, or Aerospace Engineering (or related discipline) Willing to travel to support test and launch operations PREFERRED SKILLS AND EXPERIENCES: Demonstrate success in technically focused projects involving hardware design, build, and test of support equipment (mechanical, electrical, electronic, and/or fluids) Experienced with P&ID design and fluid instrumentation and control High-pressure gas experience Ability and willingness to thrive in a fast-paced, rapidly changing work environment Experience with cryogenic systems Experience in low-cost commercial / start-up space ventures Experience with vehicle-level integration, test, and launch operations of flight hardware Familiarity with AFSPCMAN 91-710 and ASME B31.3 Excellent verbal and written communications skills Excellent organizational skills and problem-solving skills Experience with strategic planning, project scoping, budgeting, and scheduling Experience with generating and executing test plans GENERAL REQUIREMENTS: Ability to sit or stand for extended periods of time Ability to use a computer to complete assignments Ability to communicate with individuals and groups in person, by phone and telepresence Ability to pick up to 50lbs While performing the duties of this job, the employee will typically work in an office environment Ability to travel up to 25% of the time This is the lowest-to-highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer: Heavily employer-subsidized medical, dental, and vision insurance plans Long Wall paid life insurance and LTD coverage 4% 401k match Student loan repayment assistance program Paid parental leave Family planning assistance program Long Wall paid financial wellness program Paid time off for non-exempt employees and a flexible vacation policy for exempt employees ITAR Requirement This position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity Employer We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Job Description PURPOSE Provide installation, technical start-up, programming, and checkout for Building Access Control Systems, Fire Alarm, Parking Revenue Controls, and similar low voltage solutions. Maintain and grow the "Customer for Life" concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. This is a field position with the primary responsibility to handle all aspects of service, installation, programming, and startup of Access Control, Burglary, Fire, Parking, Surveillance, and related systems. Primary market focus is Commercial Office, Data Centers, Government, Industrial, Healthcare, and Education. Desired candidate will have a minimum of 3 years of proven commercial enterprise type Access Control, Surveillance Video, Fire or Parking Revenue Control system and must be able to troubleshoot related serviceable systems. Program all Access Control Panels, Workstation Software, Surveillance Video systems, Fire Alarm, Parking Revenue Control system software and associated security services via their custom software application packages. Work with IT staff to coordinate the integration into customer networks and be willing to learn advanced network configurations and setup that apply to each system. Install mechanical lock systems that are either wirefree or wired lock system. Ensures customer satisfaction by continual follow-up, communication skills and complete final checkout of service and construction jobs where assigned. Provide sales support as needed to assist Project Manager to obtain recurring business. Have the drive to be the technical expert for our solutions and be willing to continue to learn our systems and provide value to customers. Assigned service calls to keep our offerings up and running with quick response and thorough checkout. Baker Group may supply a Van, Cell Phone, tools, and laptop. Provide documentation for operation and maintenance after a project is complete and communicate changes and modifications with Application Engineer. Attend turnover meetings between Project Manager and Applications Engineer discussing project scope, safety, timelines, etc. You will be required to obtain your NICET 1 and 2 certifications to maintain your State of Iowa Alarm License. Fire Alarm System knowledge is preferred for this position as well. You will be part of an On-Call schedule which is adjustable but currently once every 10 weeks. We do work all over Iowa and the Midwest. Our technicians must be agreeable to traveling overnight on occasions to install or startup a system that is out of town. You will be required to obtain your 30 HR OSHA certification within the 1st year. Baker Group allocates a budget for Baker Group Shirts that must be always worn, and pants must be in good condition with no holes or frays so that we all stay consistent with an image of Baker Group. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Local 347 VDV Technician 2 Year Associates Degree in Related Technology High School Diploma CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Ability to perform all necessary duties unsupervised Knowledge of common Windows Office applications Knowledge of Microsoft SQL or other database applications preferred but not required Knowledge of Ethernet and serial network communication formats and hardware configurations Excellent interpersonal skills with ability to communicate effectively, both verbally and written Ability to take direction and fulfill commitments Value and support company core values and culture Understanding of construction site safety and display a high awareness of your surroundings Effectively prioritize and balance the "big picture" and immediate responsibilities Ability to listen effectively, value the opinions of others and acknowledge contributions of others Ability to communicate and work well with others at all levels ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to typical construction site and/or industrial site risks and environment Be able to work in exterior elements that come with all seasons (with or without temperature changes). EQUIPMENT/TOOLS Laptop PC Electronic Multimeter Hand tools/power tools Product Manufacturer Software Ladders and Lifts Required PPE is always in use. Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.