Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
11/06/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Level 4 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. Skill Level 4 work operations/job activities may include: • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Level 3 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. AT&T Experience needed 1. Must have Telecommunication Central Office expierance and be able to work independently Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Level 3 Installers Travel: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. AT&T Experience needed 1. Must have Telecommunication Central Office expierance and be able to work independently Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Level 3 Installers: Must have, or be able to obtain, Real ID or Passport for nationwide air travel. 1. Have a minimum of 2 years accumulated experience, or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, or 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the following work operations or job activities without supervision or direction: Addition or removal of common systems equipment hardware. Addition or removal of wiring and connections (on non-working equipment only). Lead verification/continuity testing. Analysis of job specifications and drawings. Understand the Scope of Work (SOW) and write comprehensive Job Change Order (JCO) summaries. Provide work assignments to Skill Level 1 and 2 Installers. Prepare a Method of Procedure (MOP). Write Job Information Memorandums (JIMs). Resolve job specification and/or drawing problems. Mark/correct office record drawings. In-process and final quality inspections. 3. Be capable of performing as the Installation Supplier's in-charge person on Common Systems jobs. 4. Not perform Skill Level 4 work operations/job activities unless properly supervised. 5. Not progress to Skill Level 4 without a minimum of 6 years accumulated experience or equivalent as determined by the Installation Supplier's training process. 6. Not perform work operations/job activities on working equipment or circuits unless directly supervised. Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Understanding of proper cabling installation and protection techniques. 17. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 18. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 19. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 20. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 21. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 22. Ability to make and test Cat-5/6 cables straight and crossover. 23. Ability to see Understand the telecom color codes and wire wrap paired cable. 24. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 25. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 26. Knowledge of Telcordia GR1275 industry installation standards. 27. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Central Office/Data Center Installer Level 2 Nationwide Travel Pay Rate: $23.00 - $26.00 per hour Job Description: The Data Center / CO Tech's primary role is to plan and implement infrastructure and services through project work for moderate complexity level requests. Essential Duties: • Builds, dresses, and deploys infrastructure, and platforms installations to specifications. • Work with minimum supervision • Physically build the product following the hardware job specifications and drawings working with limited supervision Required Qualifications: • Experience with installing Switches & Routers and frames and infrastructure. • Experience in Data Center/ CO environments • Experience with Optical Networking Equipment • Lead Installation Technician should have a minimum of 1-2 years Data Center/PoP/CO installation experience. • Possess a good mechanical aptitude. • Must possess a good knowledge of basic power tools operation. • Ability to adapt to various work environments • Should have a basic knowledge of optical/cable routing installation standards • Basic knowledge and understanding of AC/DC power • Should have basic knowledge of Data center / Central office infrastructure • Meet Network Equipment Installation/Quality Industry Standards Physical Demands: • The employee will be required to write and handle paperwork. • The employee will be required to climb and work off ladders. • The employee will be required to work under raised floors. • The employee may be required to cut and drill metal and concrete. • The employee must be able to distinguish between different colors. • The employee will be required to have a vehicle to travel to customer sites • The employee will be required to lift weight up to 50 pounds. • Vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer and cable color coding, working with files & paperwork, working with tools, and working on specialized computer & networking devices.
11/05/2026
Full time
Job Description Job Description Central Office/Data Center Installer Level 2 Nationwide Travel Pay Rate: $23.00 - $26.00 per hour Job Description: The Data Center / CO Tech's primary role is to plan and implement infrastructure and services through project work for moderate complexity level requests. Essential Duties: • Builds, dresses, and deploys infrastructure, and platforms installations to specifications. • Work with minimum supervision • Physically build the product following the hardware job specifications and drawings working with limited supervision Required Qualifications: • Experience with installing Switches & Routers and frames and infrastructure. • Experience in Data Center/ CO environments • Experience with Optical Networking Equipment • Lead Installation Technician should have a minimum of 1-2 years Data Center/PoP/CO installation experience. • Possess a good mechanical aptitude. • Must possess a good knowledge of basic power tools operation. • Ability to adapt to various work environments • Should have a basic knowledge of optical/cable routing installation standards • Basic knowledge and understanding of AC/DC power • Should have basic knowledge of Data center / Central office infrastructure • Meet Network Equipment Installation/Quality Industry Standards Physical Demands: • The employee will be required to write and handle paperwork. • The employee will be required to climb and work off ladders. • The employee will be required to work under raised floors. • The employee may be required to cut and drill metal and concrete. • The employee must be able to distinguish between different colors. • The employee will be required to have a vehicle to travel to customer sites • The employee will be required to lift weight up to 50 pounds. • Vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer and cable color coding, working with files & paperwork, working with tools, and working on specialized computer & networking devices.
Job Description Job Description Travel Installer Must have, or be able to obtain, Real ID or Passport for nationwide air travel. Installers: 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
11/05/2026
Full time
Job Description Job Description Travel Installer Must have, or be able to obtain, Real ID or Passport for nationwide air travel. Installers: 1. Have a minimum of 3 years accumulated experience or equivalent as determined by the Installation Supplier's training process and demonstrated to the TC representative upon request, proficiency in the system (Network Elements 1, 2, 3, and 4) being worked on, or hold a Certificate of Completion from a training facility providing an appropriate curriculum. 2. Be capable of performing the same work operations/job activities as a Skill Level 3 Installer without supervision or direction. 3. Be capable of performing as the Installation Supplier's in-charge person. 4. Be capable of performing additions, removals, and modifications on working equipment and circuits. • Circuit modifications • Software additions or upgrades • Power transition work • Addition or removal of batteries. 5. Addition or removal of circuits on working power distribution sources. 6. Equipment testing and turn-up Requirements: 1. Must understand and know how to use Microsoft programs and applications on a PC and smart device. 2. Must understand Ethernet and Serial connection requirements and be able to establish PC to Network Elements communications using appropriate interface cable. 3. Must have a smart phone with picture capabilities and the ability to place applications used for work. 4. Must have a smart phone with "Mobile Hotspot" capabilities and the ability to establish smart phone to PC connections for the purpose of assisting with remote support via desktop sharing. 5. Must be able to work alone and with others in a fast-paced schedule. 6. Must be able to take direction and constructive criticism. 7. Must be able to think freely and overcome complex issues. 8. Ability to learn to run scripts and commands for test and turn-up of equipment. 9. Must be able to learn company and customer programs for data collection. 10. Must have the ability to fly and ability to travel 100% for 3 consecutive weeks or more with field breaks as the company needs allow. 11. Must pass criminal and drug tests to gain access badging from the telco customer. 12. Must be able to interface politely with the customer using proper work ethics and etiquette while working under pressure. 13. Must have the ability and aptitude to meet customer start and stop working hours. 14. Must be able to climb ladders and work in tight spaces. 15. Must have their own telecom insulated hand tools. (See required tool kits below) 16. Must know how to use telecom test equipment tools. a. OTDR b. Fiber scope c. Volt Ohm Meter d. BER test sets e. Cable test equipment f. Visual Fault Locator (Ruby reds) 17. Understanding of proper cabling installation and protection techniques. 18. Understanding industry standards for securing cables using waxed 9-cord and Velcro. 19. Understanding of proper fiber types, ends, jumper/JPOI handling and protection. 20. Understanding of proper fiber cleaning and scoping techniques. (Will NOT be required to splice) 21. Knowledge and understanding of DWDM, OME long haul, short haul, up to 100G circuits. 22. Knowledge and understanding of Transport protocols Ethernet and OTN. 23. Knowledge and understanding of mounting equipment in customer central offices, colocation areas, huts, and outdoor enclosures. 24. Ability to make and test Cat-5/6 cables straight and crossover. 25. Ability to see Understand the telecom color codes and wire wrap paired cable. 26. Ability to read, interpret, and understand engineering documents, customer best practices, and manufacturer technical practices. a. Scope of work b. Cable run lists c. Rack Face View (RFV) drawing d. Signal Flow Diagram (SFD) e. Circuit drawings f. Installation instructions g. Method Of Procedures (MOP) (E-MOPs) 27. Knowledge of AC and DC power. a. Power Bays, verifying and installing -48V and return leads while protecting live circuits. b. Must be able to properly strip and crimp DC power leads. c. Crimping of lugs and H-Taps. d. Ability to terminate power safely. e. Use of electrical grease where required. f. Use of double insulated torque wrench and screwdriver. g. Able to work steadily in an enclosed power environment. h. Understanding of AC power and connections. 28. Knowledge of Telcordia GR1275 industry installation standards. 29. Telco equipment manufacturer and customer knowledge is a plus. a. Ciena b. Cisco c. Telecommunication d. Comcast e. Telecommunication f. Enterprise customers g. GCN customers h. Etc.
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/06/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Job Description Job Description Skilled And Self-Motivated Telecommunications Cabling Installer - Service Technician Wanted! We're CKC Data Solutions , and we're hiring a certified technician to join us full-time and deliver impressive work for clients. In this role, you'll build upon your current experience, learn valuable new skills, and make a substantial impact. Job Covers: Based in Springfield, Missouri, we serve clients throughout the country. Travel (local and overnight) is required. Pay: Competitive salary based on experience Benefits: Travel opportunities, professional development, training sessions, and the ability to grow and advance within our company We're looking for someone who can think on their feet to complete high-quality work with minimal supervision and within a reasonable timeframe. If that sounds like you, keep reading to learn more about becoming our Telecommunications Cabling Installer - Service Technician! YOU CAN EXPECT TO: Travel to industrial and commercial locations Communicate with clients, project managers, and team members about their structured cabling needs Accurately install, terminate, test, and label copper (Cat5e, Cat6, Cat6A) and fiber optic cables according to blueprints, schematics, technical drawings, and CKC standards Troubleshoot and maintain systems while complying with BICSI, ANSI/TIA, and local codes Use various tools to test and certify cables Clean and organize your job site Follow all company standards, procedures, and expectations REQUIREMENTS FOR OUR TELECOMMUNICATIONS CABLING INSTALLER - SERVICE TECHNICIAN: Current BICSI certification, preferably technician level or higher Proven structured cabling installation experience and proficiency with testing and installation equipment Thorough understanding of telecommunications infrastructure and standards Ability to accurately read and follow construction drawings and technical specifications Ability to complete high-quality work independently, with a team, and with minimal supervision Physical ability to lift 50 lbs and work in various environments/conditions (construction sites, data centers, on ladders, in confined spaces, etc.) Valid driver's license and willingness to travel regularly, including some overnight travel as needed JOIN US! CKC Data Solutions provides comprehensive planning and coordination to deliver tailored IT infrastructure solutions for clients nationwide. From installing structured network cabling-Cat6, Cat6A, fiber optics, coaxial cabling, and air-blown fiber systems-to integrated security systems, IP cameras, and access control, our work supports the critical backbone of our partners' operations. Headquartered in Springfield, MO, with an office in Kansas City, we proudly serve projects in all 50 states. But what truly sets us apart is our people-first approach-we believe that by taking care of our employees, we can take exceptional care of our clients. That's why we offer competitive pay, outstanding benefits, growth opportunities, and ongoing training to help our team thrive. At CKC, we don't want just customers-we want partners, and that starts with you. Click "Apply" to reach out about becoming our Telecommunications Cabling Installer - Service Technician. Join a crew that values your time and skill! Must have the ability to pass a background check Job Posted by ApplicantPro
10/02/2026
Full time
Job Description Job Description Skilled And Self-Motivated Telecommunications Cabling Installer - Service Technician Wanted! We're CKC Data Solutions , and we're hiring a certified technician to join us full-time and deliver impressive work for clients. In this role, you'll build upon your current experience, learn valuable new skills, and make a substantial impact. Job Covers: Based in Springfield, Missouri, we serve clients throughout the country. Travel (local and overnight) is required. Pay: Competitive salary based on experience Benefits: Travel opportunities, professional development, training sessions, and the ability to grow and advance within our company We're looking for someone who can think on their feet to complete high-quality work with minimal supervision and within a reasonable timeframe. If that sounds like you, keep reading to learn more about becoming our Telecommunications Cabling Installer - Service Technician! YOU CAN EXPECT TO: Travel to industrial and commercial locations Communicate with clients, project managers, and team members about their structured cabling needs Accurately install, terminate, test, and label copper (Cat5e, Cat6, Cat6A) and fiber optic cables according to blueprints, schematics, technical drawings, and CKC standards Troubleshoot and maintain systems while complying with BICSI, ANSI/TIA, and local codes Use various tools to test and certify cables Clean and organize your job site Follow all company standards, procedures, and expectations REQUIREMENTS FOR OUR TELECOMMUNICATIONS CABLING INSTALLER - SERVICE TECHNICIAN: Current BICSI certification, preferably technician level or higher Proven structured cabling installation experience and proficiency with testing and installation equipment Thorough understanding of telecommunications infrastructure and standards Ability to accurately read and follow construction drawings and technical specifications Ability to complete high-quality work independently, with a team, and with minimal supervision Physical ability to lift 50 lbs and work in various environments/conditions (construction sites, data centers, on ladders, in confined spaces, etc.) Valid driver's license and willingness to travel regularly, including some overnight travel as needed JOIN US! CKC Data Solutions provides comprehensive planning and coordination to deliver tailored IT infrastructure solutions for clients nationwide. From installing structured network cabling-Cat6, Cat6A, fiber optics, coaxial cabling, and air-blown fiber systems-to integrated security systems, IP cameras, and access control, our work supports the critical backbone of our partners' operations. Headquartered in Springfield, MO, with an office in Kansas City, we proudly serve projects in all 50 states. But what truly sets us apart is our people-first approach-we believe that by taking care of our employees, we can take exceptional care of our clients. That's why we offer competitive pay, outstanding benefits, growth opportunities, and ongoing training to help our team thrive. At CKC, we don't want just customers-we want partners, and that starts with you. Click "Apply" to reach out about becoming our Telecommunications Cabling Installer - Service Technician. Join a crew that values your time and skill! Must have the ability to pass a background check Job Posted by ApplicantPro
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.
10/02/2026
Full time
Job Description Job Description Level 4 Installer - Nationwide Travel Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: Work with minimum supervision and be certified in Skill levels 1, 2 and 3. Input job status, issues and requests and all-expense-related information into the Project Management platform. Reconcile materials for sales order using web-based inventory control forms. Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. Maintain tools assigned to the job as well as monitor tool calibration requirements. Perform hardware testing, such as power verification, device provisioning and system tests. Responsible for all work meeting all customer standards. Meet or exceed customer and internal documented acceptable levels of quality. Adherence to training, safety and compliance requirements. Credentials and Experience: Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. Should possess a good mechanical aptitude. Should possess a good knowledge of basic power tools. Should have the ability to adapt to various work environments. Should have good knowledge of optical routing equipment installations. Should have good knowledge of fiber optic cable installation & testing practices. Should have good knowledge of AC/DC power. Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.). Special Requirements Due to the nature of our Customers' requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. The employee will be required to climb and work off of ladders. The employee will be required to work under raised floors. The employee will be required to cut and drill metal and concrete. The employee must be able to distinguish between different colors. The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. _ The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. _ EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team. Company Description CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.