it job board logo
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
  • Recruiting? Post a job
  • Sign in
  • Sign up
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

3 jobs found

Email me jobs like this
Refine Search
Current Search
senior field applications engineer analog power
Sr. Automation Engineer
Baker Group Ankeny, Iowa
Job Description Job Description Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the "Client for Life" concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power. Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc. Uploading, downloading, and modification of control software and programs. IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers. Create and troubleshoot automation networks and communication protocols. Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments. Map control points into supervisory controller and add alarms and history extensions to supervisory controller points. Map control points into the graphical front end and link points to graphics. Create Automation System graphics and dashboards that tie into a SCADA system. Understand construction and project schedules, and manage QA/QC checklists and commissioning logs Interpret Sequence Of Operations (SOO) and apply to program logic. Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming. Manage medium to large projects. Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers Assist with Tier III Business Development Pursuits. Assist with the development of Core Process and Standards for the Automation Business Unit. Travel to job sites is required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Bachelor's degree in engineering related field or equivalent work experience 7+ years of Automation related field and engineering experience Knowledge of common Microsoft Office applications (Excel, Word, Outlook) Knowledge of Microsoft SQL or other database applications preferred Knowledge of Ethernet and serial network communication formats and hardware configurations Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices) Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Ability to perform independently. Strong interpersonal skills with effective verbal and written communication. Ability to follow instructions and meet commitments. Value and support company Core Focus and Values. Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels. Prioritize and balance long-term goals with immediate tasks. Ability to listen effectively, value other's opinions of and acknowledge contributions. Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers. Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY Prolonged periods of sitting at a desk and working on a computer Must be able to lift 75 pounds occasionally May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS Laptop PC Electronic Multimeter Magnehelic RS-485 and RS-232 Serial Adapters Hand tools/Light power tools Product Manufacturer Software Ladders and Lifts Oscilloscope Wireshark Procore, BIM 360, and other Construction Management Softwares Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.
11/19/2026
Full time
Job Description Job Description Senior Automation Engineer Department: Automation FLSA Designation: Non-Exempt PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the "Client for Life" concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components. Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power. Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc. Uploading, downloading, and modification of control software and programs. IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers. Create and troubleshoot automation networks and communication protocols. Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments. Map control points into supervisory controller and add alarms and history extensions to supervisory controller points. Map control points into the graphical front end and link points to graphics. Create Automation System graphics and dashboards that tie into a SCADA system. Understand construction and project schedules, and manage QA/QC checklists and commissioning logs Interpret Sequence Of Operations (SOO) and apply to program logic. Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming. Manage medium to large projects. Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers Assist with Tier III Business Development Pursuits. Assist with the development of Core Process and Standards for the Automation Business Unit. Travel to job sites is required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Bachelor's degree in engineering related field or equivalent work experience 7+ years of Automation related field and engineering experience Knowledge of common Microsoft Office applications (Excel, Word, Outlook) Knowledge of Microsoft SQL or other database applications preferred Knowledge of Ethernet and serial network communication formats and hardware configurations Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices) Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS Valid driver's license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS Ability to perform independently. Strong interpersonal skills with effective verbal and written communication. Ability to follow instructions and meet commitments. Value and support company Core Focus and Values. Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels. Prioritize and balance long-term goals with immediate tasks. Ability to listen effectively, value other's opinions of and acknowledge contributions. Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers. Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY Prolonged periods of sitting at a desk and working on a computer Must be able to lift 75 pounds occasionally May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS Laptop PC Electronic Multimeter Magnehelic RS-485 and RS-232 Serial Adapters Hand tools/Light power tools Product Manufacturer Software Ladders and Lifts Oscilloscope Wireshark Procore, BIM 360, and other Construction Management Softwares Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.
Leidos
Principal Digital/Embedded Firmware Engineer
Leidos Saint Petersburg, Florida
Job Description Description The Defense Systems Group at Leidos has an immediate opening for a Principal Digital Firmware Design Engineer at our St. Petersburg, FL facility. This position supports the development of advanced, mission-critical military communications systems and involves the design, integration, testing, and optimization of secure, ruggedized electronic hardware and firmware for defense applications. The ideal candidate will possess deep expertise in FPGA-based digital design and hands-on experience with integrating hardware and firmware within complex embedded systems. This individual will have a demonstrated track record supporting defense programs across the full product lifecycle-from requirements development and architectural design through integration, qualification testing, and transition to production. The Leidos St. Petersburg facility specializes in the design, development, modeling and simulation, analysis, prototyping, and testing of advanced electronic systems. Our primary focus areas include embedded communications systems, Software Defined Radios (SDR), and Phased Array Antenna Systems supporting Department of Defense and commercial customers. Primary Responsibilities: Participate in a multi-disciplinary engineering team developing secure, high-performance military communications hardware and firmware. Analyze and decompose system-level requirements into detailed hardware design specifications with full traceability. Perform Logic Design; write VHDL code, perform synthesis, logic simulation, test bench generation, functional testing and hardware debugging of designs within FPGA/CPLD devices. Architect, implement and test embedded firmware /software within FPGA-based digital designs including signal processing, control logic, and high-speed interfaces on a variety of platforms (FPGAs, microcontrollers, microprocessors, and mixed signal designs). Troubleshoot and resolve complex hardware, firmware / software and integration issues across prototype and production phases. Support design reviews (SRR, PDR, CDR), technical documentation, and configuration management processes. Provide technical input for cost estimates, schedules, and risk assessments. Collaborate closely with Firmware, Software, RF, systems, and test engineering teams throughout the development lifecycle. Clearance Requirements: U.S. Citizen required. Ability to obtain and maintain a Secret Security Clearance. Active Secret clearance preferred. Ability to obtain Top Secret clearance preferred. Required Qualifications: BS or MS in Electrical Engineering, Computer Engineering, or related field. 8+ years of experience in embedded hardware and digital design (10+ preferred for Senior level). Experience supporting full product development lifecycle including: Requirements analysis, System design and hardware implementation, Integration and test Firmware/software architecture development for embedded systems, including FPGAs and SoCs Technical documentation and formal design reviews Strong VHDL, FPGA/SoC design and implementation experience: Digital logic design using VHDL/Verilog with System-On-Chip devices (SoC's), FPGA's, CPLD/s, and/or Microcontrollers. Modern vendor design tools (IDE's) such as Xilinx Vivado, Vitis, STM, Libero SoC, Lattice Diamond Simulation and Testbench generation (Xilinx simulator, Aldec Active HDL, Riveria Pro, Modelsim, or similar) RISC microprocessors architectures (ARM Cortex, Microblaze, PowerPC, RISC-V) C/C++ language software development for embedded, real-time systems. Experience with one or more of the following: Integrating and troubleshooting digital subsystems within embedded systems. Digital interfaces such as I2C, SPI, RS-232/422, USB, Ethernet ADC/DAC devices and understanding performance characteristics. Hands-on lab experience debugging hardware using oscilloscopes, logic analyzers, and related tools Understand trade-offs of embedded system targets (FPGA, SoC, microcontroller, RTOS, bare-metal) for developing best cost/option architectures Preferred Qualifications: Active Secret or Top Secret clearance. Proven experience in full-stack FPGA development for Xilinx UltraScale/UltraScale+ architectures, spanning RTL design (VHDL/Verilog) and embedded C/C++ development for bare-metal, FreeRTOS, or embedded Linux environments (PetaLinux, etc). Experience with one or more of the following: Design and development with other FPGA/CPLD vendors such as Microsemi, ST-Micro, Lattice, etc High-speed interfaces/protocols such as PCIe, JESD204B, LVDS, and SERDES Simulation and modeling tools (MATLAB, Python, LabVIEW) Implementing signal processing concepts such as digital filters, digital modulation, up/down conversion within HDL designs IP cores and modern processor interfaces (Xilinx IP Cores, AXI4, AXI-Stream or similar) Design, integration and testing electronic circuits within embedded systems, including digital, analog and radio frequency (RF) subsystems. Experience developing ruggedized or military communication systems Experience with the Cooperative Engagement Capability Naval communications system. Experience transitioning prototype designs into production hardware Familiar with schematic capture design tools (Altium, Cadence Allegro/OrCAD, Ki-CAD or equivalent) If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. Original Posting:October 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at -benefits. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.
11/13/2026
Full time
Job Description Description The Defense Systems Group at Leidos has an immediate opening for a Principal Digital Firmware Design Engineer at our St. Petersburg, FL facility. This position supports the development of advanced, mission-critical military communications systems and involves the design, integration, testing, and optimization of secure, ruggedized electronic hardware and firmware for defense applications. The ideal candidate will possess deep expertise in FPGA-based digital design and hands-on experience with integrating hardware and firmware within complex embedded systems. This individual will have a demonstrated track record supporting defense programs across the full product lifecycle-from requirements development and architectural design through integration, qualification testing, and transition to production. The Leidos St. Petersburg facility specializes in the design, development, modeling and simulation, analysis, prototyping, and testing of advanced electronic systems. Our primary focus areas include embedded communications systems, Software Defined Radios (SDR), and Phased Array Antenna Systems supporting Department of Defense and commercial customers. Primary Responsibilities: Participate in a multi-disciplinary engineering team developing secure, high-performance military communications hardware and firmware. Analyze and decompose system-level requirements into detailed hardware design specifications with full traceability. Perform Logic Design; write VHDL code, perform synthesis, logic simulation, test bench generation, functional testing and hardware debugging of designs within FPGA/CPLD devices. Architect, implement and test embedded firmware /software within FPGA-based digital designs including signal processing, control logic, and high-speed interfaces on a variety of platforms (FPGAs, microcontrollers, microprocessors, and mixed signal designs). Troubleshoot and resolve complex hardware, firmware / software and integration issues across prototype and production phases. Support design reviews (SRR, PDR, CDR), technical documentation, and configuration management processes. Provide technical input for cost estimates, schedules, and risk assessments. Collaborate closely with Firmware, Software, RF, systems, and test engineering teams throughout the development lifecycle. Clearance Requirements: U.S. Citizen required. Ability to obtain and maintain a Secret Security Clearance. Active Secret clearance preferred. Ability to obtain Top Secret clearance preferred. Required Qualifications: BS or MS in Electrical Engineering, Computer Engineering, or related field. 8+ years of experience in embedded hardware and digital design (10+ preferred for Senior level). Experience supporting full product development lifecycle including: Requirements analysis, System design and hardware implementation, Integration and test Firmware/software architecture development for embedded systems, including FPGAs and SoCs Technical documentation and formal design reviews Strong VHDL, FPGA/SoC design and implementation experience: Digital logic design using VHDL/Verilog with System-On-Chip devices (SoC's), FPGA's, CPLD/s, and/or Microcontrollers. Modern vendor design tools (IDE's) such as Xilinx Vivado, Vitis, STM, Libero SoC, Lattice Diamond Simulation and Testbench generation (Xilinx simulator, Aldec Active HDL, Riveria Pro, Modelsim, or similar) RISC microprocessors architectures (ARM Cortex, Microblaze, PowerPC, RISC-V) C/C++ language software development for embedded, real-time systems. Experience with one or more of the following: Integrating and troubleshooting digital subsystems within embedded systems. Digital interfaces such as I2C, SPI, RS-232/422, USB, Ethernet ADC/DAC devices and understanding performance characteristics. Hands-on lab experience debugging hardware using oscilloscopes, logic analyzers, and related tools Understand trade-offs of embedded system targets (FPGA, SoC, microcontroller, RTOS, bare-metal) for developing best cost/option architectures Preferred Qualifications: Active Secret or Top Secret clearance. Proven experience in full-stack FPGA development for Xilinx UltraScale/UltraScale+ architectures, spanning RTL design (VHDL/Verilog) and embedded C/C++ development for bare-metal, FreeRTOS, or embedded Linux environments (PetaLinux, etc). Experience with one or more of the following: Design and development with other FPGA/CPLD vendors such as Microsemi, ST-Micro, Lattice, etc High-speed interfaces/protocols such as PCIe, JESD204B, LVDS, and SERDES Simulation and modeling tools (MATLAB, Python, LabVIEW) Implementing signal processing concepts such as digital filters, digital modulation, up/down conversion within HDL designs IP cores and modern processor interfaces (Xilinx IP Cores, AXI4, AXI-Stream or similar) Design, integration and testing electronic circuits within embedded systems, including digital, analog and radio frequency (RF) subsystems. Experience developing ruggedized or military communication systems Experience with the Cooperative Engagement Capability Naval communications system. Experience transitioning prototype designs into production hardware Familiar with schematic capture design tools (Altium, Cadence Allegro/OrCAD, Ki-CAD or equivalent) If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. Original Posting:October 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit . Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at -benefits. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.
Information Security Specialist
Canyon Aeroconnect Prescott, Arizona
Job Description Job Description This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Canyon AeroConnect stands as one of the world's leading suppliers of avionic-standard aircraft communications, navigation and audio/intercom systems. Canyon's products have been widely adopted and proven in-service across a wide range of civilian, paramilitary and military fixed-wing and rotorcraft applications. Over the years, we've become known as the benchmark in aircraft tactical communication and audio equipment for Air Ambulance, Law Enforcement, SAR, EMS, Electronic News Gathering, Military and Marine applications. Products include digital and analog radio/audio management systems, Tac/Com, VHF/UHF radio systems, intercoms, data interface accessories, and aural warning. We are seeking dynamic thinkers who could be integral team members for our high-tech avionics' products. Role purpose (position scope): The Information Security Specialist (Information Systems Security Officer) helps build and operate the internal security program and technology operations. This hands-on role works across security operations, identity and access management, endpoint and network defense, vendor risk, compliance, and end-user enablement. The position works closely with IT, engineering, and business teams to keep the company secure without slowing it down and is intended for an individual who wants to grow into a senior internal security role over time. Key Responsibilities: Support day-to-day security operations, including SIEM and EDR alert triage, log review, and incident-response investigations. Help administer identity and access management systems, including SSO, MFA, directory services, onboarding, transfers, offboarding, periodic access reviews, and cleanup of stale accounts and entitlements. Maintain and improve endpoint security, including EDR health, patch management, configuration baselines, and disk encryption. Assist with firewall rule reviews, VPN administration, network segmentation, and monitoring for misconfigurations. Support vulnerability scanning, prioritization, remediation coordination, and metric tracking. Support compliance activities such as CMMC and NIST by collecting evidence, maintaining policies, completing customer security questionnaires, and preparing for applicable audits. Support vendor risk management by reviewing third-party security documentation and tracking risk acceptances. Develop and deliver security awareness content, including phishing simulations, onboarding training, and internal guidance. Serve as a point of contact for security questions, suspicious emails, lost devices, and access requests. Document security processes, runbooks, and System Security Plan (SSP) so the program can scale as the company grows. Participate in the on-call rotation. Required Qualifications: At least one year of experience in information security, IT operations, or a closely related field Solid fundamentals in networking, operating systems, and authentication protocols. Familiarity with compliance frameworks, especially CMMC and applicable European requirements such as Cyber Essentials. Ability to script in Python, PowerShell, or Bash for automation and ad hoc tasks. Strong written and verbal communication skills, including the ability to explain security concepts to non-technical audiences. Experience supporting and managing highly regulated and secured network systems. Self-directed and comfortable providing Tier 2 helpdesk support as well as working across teams in a fast-moving environment. Willingness to be part of the on-call rotation and respond to cyber incidents during evening or weekends. Ability to obtain industry certifications such as CCNA, CompTIA Security+, or Network+ within the next 12 months. Preferred Qualifications: Three or more years of experience in information security, AI, or a closely related field, with hands-on exposure to multiple security domains. Working knowledge of SIEM, EDR, vulnerability scanners, identity providers such as Okta or Entra ID, and cloud platforms such as AWS, Azure, or GCP. Experience supporting or leading audits. Exposure to cloud security posture management. Familiarity with offensive security concepts and tooling highly regulated and secured network systems. Industry certification such as CISSP, CISM, CCIE, CCNP Security, CISA, CRISC, or similar. Compliance Considerations: The role may support applicable information-security and regulatory requirements identified for the business, including ITAR, CMMC, NIS2, Cyber Essentials and Cyber Essentials Plus, CMS, DCPP, and ISO/IEC 27001. Work Environment: This is an on-site position at the designated company location. Direct Reports No direct reports. The position may provide technical direction, peer review, or mentoring consistent with the assigned level. Physical Demands Tasks involve light physical effort in sedentary to light work and may involve lifting, carrying, pushing, or pulling objects or materials weighing 5-10 lb. Tasks may involve extended periods at a keyboard or workstation. Work Environment Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the job duties described above, the employee mainly works in an office, lab, or factory setting that is relatively quiet and has temperature-control systems. This job description is not intended to be all inclusive of every job function, duty and responsibility. Duties may increase, decrease and/or change as deemed necessary to support the department operations.
09/28/2026
Full time
Job Description Job Description This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Canyon AeroConnect stands as one of the world's leading suppliers of avionic-standard aircraft communications, navigation and audio/intercom systems. Canyon's products have been widely adopted and proven in-service across a wide range of civilian, paramilitary and military fixed-wing and rotorcraft applications. Over the years, we've become known as the benchmark in aircraft tactical communication and audio equipment for Air Ambulance, Law Enforcement, SAR, EMS, Electronic News Gathering, Military and Marine applications. Products include digital and analog radio/audio management systems, Tac/Com, VHF/UHF radio systems, intercoms, data interface accessories, and aural warning. We are seeking dynamic thinkers who could be integral team members for our high-tech avionics' products. Role purpose (position scope): The Information Security Specialist (Information Systems Security Officer) helps build and operate the internal security program and technology operations. This hands-on role works across security operations, identity and access management, endpoint and network defense, vendor risk, compliance, and end-user enablement. The position works closely with IT, engineering, and business teams to keep the company secure without slowing it down and is intended for an individual who wants to grow into a senior internal security role over time. Key Responsibilities: Support day-to-day security operations, including SIEM and EDR alert triage, log review, and incident-response investigations. Help administer identity and access management systems, including SSO, MFA, directory services, onboarding, transfers, offboarding, periodic access reviews, and cleanup of stale accounts and entitlements. Maintain and improve endpoint security, including EDR health, patch management, configuration baselines, and disk encryption. Assist with firewall rule reviews, VPN administration, network segmentation, and monitoring for misconfigurations. Support vulnerability scanning, prioritization, remediation coordination, and metric tracking. Support compliance activities such as CMMC and NIST by collecting evidence, maintaining policies, completing customer security questionnaires, and preparing for applicable audits. Support vendor risk management by reviewing third-party security documentation and tracking risk acceptances. Develop and deliver security awareness content, including phishing simulations, onboarding training, and internal guidance. Serve as a point of contact for security questions, suspicious emails, lost devices, and access requests. Document security processes, runbooks, and System Security Plan (SSP) so the program can scale as the company grows. Participate in the on-call rotation. Required Qualifications: At least one year of experience in information security, IT operations, or a closely related field Solid fundamentals in networking, operating systems, and authentication protocols. Familiarity with compliance frameworks, especially CMMC and applicable European requirements such as Cyber Essentials. Ability to script in Python, PowerShell, or Bash for automation and ad hoc tasks. Strong written and verbal communication skills, including the ability to explain security concepts to non-technical audiences. Experience supporting and managing highly regulated and secured network systems. Self-directed and comfortable providing Tier 2 helpdesk support as well as working across teams in a fast-moving environment. Willingness to be part of the on-call rotation and respond to cyber incidents during evening or weekends. Ability to obtain industry certifications such as CCNA, CompTIA Security+, or Network+ within the next 12 months. Preferred Qualifications: Three or more years of experience in information security, AI, or a closely related field, with hands-on exposure to multiple security domains. Working knowledge of SIEM, EDR, vulnerability scanners, identity providers such as Okta or Entra ID, and cloud platforms such as AWS, Azure, or GCP. Experience supporting or leading audits. Exposure to cloud security posture management. Familiarity with offensive security concepts and tooling highly regulated and secured network systems. Industry certification such as CISSP, CISM, CCIE, CCNP Security, CISA, CRISC, or similar. Compliance Considerations: The role may support applicable information-security and regulatory requirements identified for the business, including ITAR, CMMC, NIS2, Cyber Essentials and Cyber Essentials Plus, CMS, DCPP, and ISO/IEC 27001. Work Environment: This is an on-site position at the designated company location. Direct Reports No direct reports. The position may provide technical direction, peer review, or mentoring consistent with the assigned level. Physical Demands Tasks involve light physical effort in sedentary to light work and may involve lifting, carrying, pushing, or pulling objects or materials weighing 5-10 lb. Tasks may involve extended periods at a keyboard or workstation. Work Environment Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the job duties described above, the employee mainly works in an office, lab, or factory setting that is relatively quiet and has temperature-control systems. This job description is not intended to be all inclusive of every job function, duty and responsibility. Duties may increase, decrease and/or change as deemed necessary to support the department operations.

Modal Window

  • Home
  • Contact
  • About Us
  • FAQs
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • IT blog
  • Facebook
  • Twitter
  • LinkedIn
  • Youtube
© 2008-2026 IT Job Board