Santa Clara Pueblo Administrative
Espanola, New Mexico
Job Description Job Description Position Summary: Incumbent works under the direct supervision of the Forest Development & Restoration Manger (supervisor). Routine supervision and technical duties are performed under direction of supervisor who specifies scope of project, objectives to be met and results expected. Instructions are provided for new or unusual aspect of work. Unusual or unprecedented situations are referred to the supervisor. Work is reviewed at appropriate intervals for technical adequacy, accomplishment of objectives and coordination with other Forestry section activities. This job description is illustrative only of the responsibilities performed by this position and is not all inclusive. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs partial range of administrative duties on an as needed basis and as directed by Forest Development and Restoration Manager. Assists with data collection, data processing, and data analysis for all project activity relating to forest development or restoration. Assists with planning and coordination of the timber stand improvement program; assist with prescribing cutting practices based on an examination of stand conditions and aesthetic or other resource requirements; consults with others, such as wildlife specialist as required. Assists with planning and coordination of the reforestation program; assist with prescribing techniques in seed collection, site preparation, and tree planting to meet rigid silvicultural standards. Assures that other regimes of wildlife, cultural sites, aesthetics, etc., have been considered. Assists with coordinating with greenhouses and seed processors to ensure adequate seed supplies are being grown for reforestation needs and associated planting acreages and tree species. Assists with examining forest for disease and insect outbreaks and makes recommendations for treatments and preventative measures to ensure healthy forest conditions. Potential to assist in writing and developing contracts and working closely with many outside agencies on timber stand improvement, reforestation, and restoration projects. Potential to assist in preparation and creation of successful proposals to get additional funding for future projects and activities under forest development or restoration. Forest Development and Restoration assignments involve the full range of duties concerned with timber stand improvement, reforestation, forest pest detection and control, genetic tree improvement, ecological restoration, and administrative functions. KNOWLEDGE, SKILLS AND ABILITIES: Ideal candidate has an in-depth knowledge of stand conditions, environmental considerations, forest ecological interrelationships, silvicultural and growth characteristics of the major forest cover types found on the Santa Clara reservation. Ideal candidate has basic knowledge of traditional Tribal cultural forest use values in order to effectively provide or obtain information to/from the general Indian population. Must possess effective written, verbal and communication. Must be a team player and positive leader. An in-depth knowledge of computer applications and basic software understanding including: Microsoft Word, Microsoft Excel, Power point, Access, and others. Knowledge of GIS and GPS technology and the ability to locate physical features on the ground and with digital mapping data. Basic knowledge of silvics, dendrology, reforestation methods, timber stand improvement principles and techniques, restoration treatment goals and objectives, and land management policies and procedures sufficient to review and/or assist in developing reforestation program and standards for a wide range of silvicultural situations. Basic knowledge of the interrelationship of physical factors such as climate and soil, and biological factors such as plant and animal associations, genetics, fungi, and soil micro-organisms, and their various influences on the type and timing of silvicultural treatments necessary and appropriate to achieve multiple-use land management objectives. Basic knowledge of forest disease and insect pathogens and the ability to prescribe treatments to reduce existing populations and to prevent additional attacks. Basic knowledge of fire behavior, wildfire pre-suppression and suppression activities. MINIMUM QUALIFICATIONS: High School Diploma or GED equivalent Course work within a Bachelor of Science/Arts degree in Forestry, Ecosystem management, Natural Resources, or similar related field is strongly preferred, but will consider years of experience in the field in lieu of a course work within degree program; Ideal one to three years' experience in forestry/environmental practices; Valid New Mexico Driver's License and insurable through the Tribe's insurance carrier; Must not have any DUI/DWI convictions within the last five (5) years from any Tribal, State or Federal Court; Must pass a background check successfully; and Must pass a drug/alcohol screening. PHYSICAL/WORK ENVIORNMENT: The incumbent must be physically capable and willing to endure extended periods of work under a wide variety of environmental conditions. Approximately 70% of this work is performed in the field. The incumbent must be in good physical condition and be able to traverse hillsides in rough forest terrain as a daily requirement when performing timber cruising, marking, or forest survey assignments. Heavy work such as lifting or digging may occur in emergencies. Wildfire control assignments may involve extremely strenuous and hazardous activity for extended times. Firefighting is not a requirement for this position, however all positions in the forestry department are encouraged to participate and become trained in wildfire suppression . Travel may be periodically required. The incumbent may be required to work occasional nights and/or weekends. Wildfire control assignments may involve extremely strenuous and hazardous activity for extended times. Operating Values: Respect - Treats everyone with courtesy, politeness and dignity. Listens to and communicates with teammates, employees and community members in ways that build mutual and positive working relationships. Citizenship - Follows proper procedures and keeps appropr4iate records. Ensures compliance with regulatory and legal requirements. Caring - Cares about and demonstrates concern for employees and community members. Builds mutually beneficial relationships with employees, vendors and community members. Trustworthiness - Takes actions that build confidence in department and Pueblo of Santa Clara. Demonstrates honesty and high standards of integrity in all interactions. Gains trust and confidence in relationships with teammates and employees at all levels. Fairness - Listens to the concerns of employees and community members. Takes specific actions to ensure the success of employees. Make decisions after careful and appropriate consideration. Responsibility - Takes accountability for the services provided, pursuing excellence in everything you do. Finish what you start rather than surrendering to obstacles or excuses. Continually look for ways to improve you work. Fulfill your obligations and assist in fulfilling the obligations of the Department.
Job Description Job Description Position Summary: Incumbent works under the direct supervision of the Forest Development & Restoration Manger (supervisor). Routine supervision and technical duties are performed under direction of supervisor who specifies scope of project, objectives to be met and results expected. Instructions are provided for new or unusual aspect of work. Unusual or unprecedented situations are referred to the supervisor. Work is reviewed at appropriate intervals for technical adequacy, accomplishment of objectives and coordination with other Forestry section activities. This job description is illustrative only of the responsibilities performed by this position and is not all inclusive. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs partial range of administrative duties on an as needed basis and as directed by Forest Development and Restoration Manager. Assists with data collection, data processing, and data analysis for all project activity relating to forest development or restoration. Assists with planning and coordination of the timber stand improvement program; assist with prescribing cutting practices based on an examination of stand conditions and aesthetic or other resource requirements; consults with others, such as wildlife specialist as required. Assists with planning and coordination of the reforestation program; assist with prescribing techniques in seed collection, site preparation, and tree planting to meet rigid silvicultural standards. Assures that other regimes of wildlife, cultural sites, aesthetics, etc., have been considered. Assists with coordinating with greenhouses and seed processors to ensure adequate seed supplies are being grown for reforestation needs and associated planting acreages and tree species. Assists with examining forest for disease and insect outbreaks and makes recommendations for treatments and preventative measures to ensure healthy forest conditions. Potential to assist in writing and developing contracts and working closely with many outside agencies on timber stand improvement, reforestation, and restoration projects. Potential to assist in preparation and creation of successful proposals to get additional funding for future projects and activities under forest development or restoration. Forest Development and Restoration assignments involve the full range of duties concerned with timber stand improvement, reforestation, forest pest detection and control, genetic tree improvement, ecological restoration, and administrative functions. KNOWLEDGE, SKILLS AND ABILITIES: Ideal candidate has an in-depth knowledge of stand conditions, environmental considerations, forest ecological interrelationships, silvicultural and growth characteristics of the major forest cover types found on the Santa Clara reservation. Ideal candidate has basic knowledge of traditional Tribal cultural forest use values in order to effectively provide or obtain information to/from the general Indian population. Must possess effective written, verbal and communication. Must be a team player and positive leader. An in-depth knowledge of computer applications and basic software understanding including: Microsoft Word, Microsoft Excel, Power point, Access, and others. Knowledge of GIS and GPS technology and the ability to locate physical features on the ground and with digital mapping data. Basic knowledge of silvics, dendrology, reforestation methods, timber stand improvement principles and techniques, restoration treatment goals and objectives, and land management policies and procedures sufficient to review and/or assist in developing reforestation program and standards for a wide range of silvicultural situations. Basic knowledge of the interrelationship of physical factors such as climate and soil, and biological factors such as plant and animal associations, genetics, fungi, and soil micro-organisms, and their various influences on the type and timing of silvicultural treatments necessary and appropriate to achieve multiple-use land management objectives. Basic knowledge of forest disease and insect pathogens and the ability to prescribe treatments to reduce existing populations and to prevent additional attacks. Basic knowledge of fire behavior, wildfire pre-suppression and suppression activities. MINIMUM QUALIFICATIONS: High School Diploma or GED equivalent Course work within a Bachelor of Science/Arts degree in Forestry, Ecosystem management, Natural Resources, or similar related field is strongly preferred, but will consider years of experience in the field in lieu of a course work within degree program; Ideal one to three years' experience in forestry/environmental practices; Valid New Mexico Driver's License and insurable through the Tribe's insurance carrier; Must not have any DUI/DWI convictions within the last five (5) years from any Tribal, State or Federal Court; Must pass a background check successfully; and Must pass a drug/alcohol screening. PHYSICAL/WORK ENVIORNMENT: The incumbent must be physically capable and willing to endure extended periods of work under a wide variety of environmental conditions. Approximately 70% of this work is performed in the field. The incumbent must be in good physical condition and be able to traverse hillsides in rough forest terrain as a daily requirement when performing timber cruising, marking, or forest survey assignments. Heavy work such as lifting or digging may occur in emergencies. Wildfire control assignments may involve extremely strenuous and hazardous activity for extended times. Firefighting is not a requirement for this position, however all positions in the forestry department are encouraged to participate and become trained in wildfire suppression . Travel may be periodically required. The incumbent may be required to work occasional nights and/or weekends. Wildfire control assignments may involve extremely strenuous and hazardous activity for extended times. Operating Values: Respect - Treats everyone with courtesy, politeness and dignity. Listens to and communicates with teammates, employees and community members in ways that build mutual and positive working relationships. Citizenship - Follows proper procedures and keeps appropr4iate records. Ensures compliance with regulatory and legal requirements. Caring - Cares about and demonstrates concern for employees and community members. Builds mutually beneficial relationships with employees, vendors and community members. Trustworthiness - Takes actions that build confidence in department and Pueblo of Santa Clara. Demonstrates honesty and high standards of integrity in all interactions. Gains trust and confidence in relationships with teammates and employees at all levels. Fairness - Listens to the concerns of employees and community members. Takes specific actions to ensure the success of employees. Make decisions after careful and appropriate consideration. Responsibility - Takes accountability for the services provided, pursuing excellence in everything you do. Finish what you start rather than surrendering to obstacles or excuses. Continually look for ways to improve you work. Fulfill your obligations and assist in fulfilling the obligations of the Department.
Cencora
Auxier, Kentucky
Job Description Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today! Job Details This role is in support of Cencora's distribution services in the US operating through our AmerisourceBergen business. Pay Details: $26.25 - $42.07/hr, including shift differential, depending on shift. Sign on Bonus: $2,000 Location: 5100 Jaindl Blvd, Bethlehem, PA 18017 Responsibilities: Under general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center. This role has the responsibility to diagnose and repair electrical and mechanical issues, along with testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI's, PLC Inputs/Outputs. In this position, the associate is responsible for reading electrical schematics, wiring diagrams, PLC ladder and block logic, loading programs or configuring PLC's, HMI, and scanners. This role will be required to complete testing of equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. In utilizing computer hardware and software, this position will be required to complete the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards, along with utilizing MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. This position is categorized as compliance critical and, as such, requires and is assigned specific responsibility for ensuring continual and proper compliance with all division, corporate and regulatory requirements. Ensures effective preventative maintenance plans and schedules for all facility equipment and systems. Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately. Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls. Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications. Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations. Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center. Manages the inventory of spare parts. Must be willing to work extended hours, as needed, in order to meet productivity goals. Performs related duties as assigned. Experience & Education: Requires High School Diploma/GED. Some technical vocational training, or equivalent combination of experience and education a PLUS. Normally requires one (1) to two (2) years related and progressively responsible experience; strong electrical background preferred. Skills & Knowledge: Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI's, PLC Inputs/Outputs. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC's, HMI, scanners Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements. Positions at this level are generally semi- skilled helpers in a particular trade area. Positions may perform more than one trade, but any trade performed should be at the semi- skilled Controls Tech I level. May require involvement of supervisor when dealing with non- routine issues to determine most appropriate course of action, but has the ability to identify and solve less complex controls related troubleshooting without the assistance of others. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI's, PLC Inputs/Outputs. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC's, HMI, scanners Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. Ability to communicate effectively both orally and in writing Strong interpersonal skills Strong organizational skills; attention to detail What Cencora offers We provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members' ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit Full time Equal Employment Opportunity Cencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law. The company's continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory. Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned Affiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation
Job Description Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today! Job Details This role is in support of Cencora's distribution services in the US operating through our AmerisourceBergen business. Pay Details: $26.25 - $42.07/hr, including shift differential, depending on shift. Sign on Bonus: $2,000 Location: 5100 Jaindl Blvd, Bethlehem, PA 18017 Responsibilities: Under general supervision of the Systems Manager, responsible for supporting the effective use and functionality of the automated equipment within a fully automated Distribution Center. This role has the responsibility to diagnose and repair electrical and mechanical issues, along with testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI's, PLC Inputs/Outputs. In this position, the associate is responsible for reading electrical schematics, wiring diagrams, PLC ladder and block logic, loading programs or configuring PLC's, HMI, and scanners. This role will be required to complete testing of equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. In utilizing computer hardware and software, this position will be required to complete the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards, along with utilizing MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. This position is categorized as compliance critical and, as such, requires and is assigned specific responsibility for ensuring continual and proper compliance with all division, corporate and regulatory requirements. Ensures effective preventative maintenance plans and schedules for all facility equipment and systems. Diagnoses Materials Handling Equipment and Automated Picking System-related error conditions occurring in the Distribution Center and repairs appropriately. Oversees any maintenance, modifications, and/or system upgrades of Materials Handling Equipment and Automated Picking System controls. Assesses the efficiency of materials handling equipment and automated picking systems and defines necessary modifications. Performs routine preventive maintenance tasks to ensure continued productivity with warehouse operations. Maintains CMMS/EAM system on repairs required and performed on equipment in the Distribution Center. Manages the inventory of spare parts. Must be willing to work extended hours, as needed, in order to meet productivity goals. Performs related duties as assigned. Experience & Education: Requires High School Diploma/GED. Some technical vocational training, or equivalent combination of experience and education a PLUS. Normally requires one (1) to two (2) years related and progressively responsible experience; strong electrical background preferred. Skills & Knowledge: Strong technical and operational knowledge of mechanical, electrical and electronic equipment and systems. Strong aptitude for repair and maintenance activities. Ability to read and interpret CAD layouts, illustrated parts breakdown (IPB) diagrams, and electrical circuitry diagrams and drawings. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including three phase or single phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic controllers (PLC), HMI's, PLC Inputs/Outputs. Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. Knowledge of programmable logic controllers (PLCs) preferred. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC's, HMI, scanners Working knowledge of computer systems and personal computers. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. Strong analytical skills; ability to resolve issues effectively and efficiently. Ability to identify facilities-related maintenance problems and implement standard courses of action to resolve problems within established project timeframes and administrative and technical requirements. Positions at this level are generally semi- skilled helpers in a particular trade area. Positions may perform more than one trade, but any trade performed should be at the semi- skilled Controls Tech I level. May require involvement of supervisor when dealing with non- routine issues to determine most appropriate course of action, but has the ability to identify and solve less complex controls related troubleshooting without the assistance of others. Ability to diagnose and repair electrical and mechanical issues. Issues may include the testing, replacement or repair electrical systems including single phase or three phase electrical systems up to 600volts, AC or DC motors, power supplies, frequency drives, servo drives, transformers, motor starters, proximity sensors, encoders, photo eyes, programmable logic Controllers (PLC), HMI's, PLC Inputs/Outputs. Ability to read electrical schematic, wiring diagrams, and PLC ladder and block logic. Ability to load programs or configure PLC's, HMI, scanners Ability to test equipment and instrumentation system including electrical, pneumatic, hydraulic, refrigeration, and water treatment chemicals. Computer hardware experience including the installation and setup of hard drives, RAM, network cards, monitor cards, and motherboards. Computer software experience including MS office (Excel, Word, IM), MHE software such as RSLogix, Sort Director, GSMi, IPoint, Flex Sort, etc. Ability to communicate effectively both orally and in writing Strong interpersonal skills Strong organizational skills; attention to detail What Cencora offers We provide compensation, benefits, and resources that enable a highly inclusive culture and support our team members' ability to live with purpose every day. In addition to traditional offerings like medical, dental, and vision care, we also provide a comprehensive suite of benefits that focus on the physical, emotional, financial, and social aspects of wellness. This encompasses support for working families, which may include backup dependent care, adoption assistance, infertility coverage, family building support, behavioral health solutions, paid parental leave, and paid caregiver leave. To encourage your personal growth, we also offer a variety of training programs, professional development resources, and opportunities to participate in mentorship programs, employee resource groups, volunteer activities, and much more. For details, visit Full time Equal Employment Opportunity Cencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law. The company's continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory. Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call or email . We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned Affiliated CompaniesAffiliated Companies: AmerisourceBergen Drug Corporation
