11 jobs found

Job Description Job Description DirectViz Solutions (DVS) is a dynamic and rapidly growing government contractor committed to delivering innovative IT solutions that address the mission-critical needs of our government clients. Through the expertise and dedication of our talented team, we provide cutting-edge technology services designed to achieve success and exceed expectations. At DVS, we prioritize our employees as our greatest asset. We offer competitive compensation, comprehensive medical benefits, a 401(k) match, generous PTO accrual, professional development reimbursement, corporate-funded technology certifications, and robust employee recognition and appreciation programs. DVS is actively seeking a Network Engineer to support our team onsite in Quantico, VA. This position requires an active Top Secret SCI clearance. Position Overview As the Senior Network Engineer, the individual will monitor and control the performance and status of network resources across multiple enclaves utilizing software and hardware tools. In this role, the Senior Network Engineer will support an on-premises network including Cisco hardware and related software covering multiple tenant agencies. The successful candidate will troubleshoot network issues, address outages, plan and execute network changes and support ATOs. Key Responsibilities Plans, configures, and installs networking hardware / software replacements and upgrades Develops and maintains all networking documentation (drawings, cut sheets, configurations, and deployment plans) Works closely with tenant agency engineers in support of networking related projects Identifies and diagnoses problems and factors affecting network performance. Provides day-to-day subject matter expertise to tenant agencies Troubleshoots networking issues and outages, which may occur during non-core hours Works with vendors in support of the network Ensures all networking applicable STIGs, POA&Ms and vulnerabilities are resolved or mitigated in a timely manner Performs routine and preventative maintenance services on all devices within the networking area of responsibility Maintains a current understanding of emerging technologies and trends Performs other tasks as required by OSC and the Government contracting office Required Qualifications High School diploma or equivalent Minimum of ten (10) years of increasingly complex and progressive experience in computer system/network engineering Must have and maintain an adjudicated Top-Secret Security Clearance with SCI eligibility Must meet the requirements of the DoW 8140 series, Cyber Security Workforce Management requirements Position requires a current Cisco Certified Network Professional (CCNP) certification or the successful completion of either the DCCOR, ENCOR, SPCOR exams Prior experience with data center technologies within a large government environment Extensive experience with inter-VLAN routing, OSPF, BGP, and HSRP is required Experience with Cisco ISE, Cisco DNA, Cisco ASR routers, Catalysts switches, Nexus devices and Cisco Firewalls and Palo Alto Firewalls is required Proficient in Microsoft Visio and Office products Preferred Qualifications Bachelor's degree Monitoring devices such as Cisco Stealth watch and SolarWinds is desired Physical and Mental Qualifications: Maintain focus and awareness throughout scheduled working hours. Perform tasks requiring prolonged periods of sitting or standing at a desk, utilizing a computer, mouse, and keyboard. Lift and move objects weighing up to 15 pounds as needed. Exhibit excellent verbal and written communication skills, with a strong command of the English language. Demonstrate the ability to work independently while also collaborating effectively as part of a team. Quickly learn and retain routine tasks and processes. Possess strong organizational skills, attention to detail, business correspondence proficiency, and self-management capabilities. Perform the essential functions of the role satisfactorily; reasonable accommodation will be provided for employees with disabilities upon request. Accept and adapt to additional responsibilities or changes to assigned duties as determined by DirectViz Solutions (DVS). If you thrive on solving complex problems and building meaningful connections, we'd love to hear from you. Join our team and make an impact today! DirectViz Solutions, LLC (DVS) is an equal opportunity employer who prohibits discrimination and harassment against any employee or applicant for employment based on race sex (including pregnancy), age, gender identity, creed, religion, national origin, sexual orientation, marital status, genetic information, disability, political affiliation, protected veteran status, or any other status protected by federal, state or local law. DVS has a zero-tolerance policy for harassment, threats, coercion, discrimination, and intimidation. Employees may file a complaint or exercise any right protected by Executive Order 11246, Section 503 of the Rehabilitation Act of 1973, as amended, Section 4212 of the Vietnam Era Veterans Readjustment Assistance Act of 1974, or the Veterans Employment Opportunities Act of 1998.

Job Description Job Description Who we are Powerus builds an American autonomous systems platform that moves, protects, and sustains critical assets in the world's most demanding environments. We blend autonomy, manufacturing, and operational expertise to serve defense, national security, critical infrastructure, and commercial customers globally. Purpose Advance resilient autonomous technologies that elevate safety, reinforce national security, and extend capabilities in complex operations. Why this role matters As we scale across new programs and sites, we need durable processes, dependable throughput, and data-driven execution. You'll be a key builder of our operational foundation. Role at a glance Process design and optimization Engineer production processes that meet targets for safety, quality, delivery, and cost. Analyze flows to remove waste and elevate efficiency. Author and maintain standard work, process documentation, and specifications. Lead corrective actions using 8D, 5 Whys, and Ishikawa analysis. Instrument processes with KPIs and SPC for visibility and control. Drive Lean and Six Sigma improvements. Operations support Serve as on-floor engineering support for day-to-day production needs. Troubleshoot equipment and process issues to minimize downtime. Partner with maintenance on reliability upgrades and PM strategies. Build business cases for capital equipment and process changes. Enable capacity increases and optimize line balance and workflow. Industrialization (NPI) Prepare new products for manufacture and validate readiness for volume. Produce process flow diagrams, work instructions, tooling/fixture lists, and control plans. Coordinate DFM with design engineering to simplify builds and cut cost. Participate in formal DFM reviews. Quality and compliance Elevate process capability and product quality in partnership with Quality. Execute and support CAPA. Plan and run process validations and capability studies. Meet safety, environmental, and regulatory obligations; support audits. Project leadership Own CI and capital projects from scoping to launch. Define schedules, budgets, and resources; report status to leadership. Contribute to facility expansion, automation, and modernization initiatives. Qualifications Education Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or related technical field. Experience 3-7 years in a production manufacturing or process engineering role. Demonstrated NPI and production ramp experience. Hands-on lean/CI delivery on the shop floor. Core competencies Lean/Six Sigma; process development and standard work creation. Problem solving via 8D, 5 Whys, fishbone; PFMEA and control plans. DFM and specification of tooling and fixtures. Statistical Process Control and data-centric analysis. ERP and CAD experience; advanced Excel capability. Preferred Lean Six Sigma Green Belt or Black Belt. Automation/robotics/modernization exposure. Background in aerospace, automotive, or industrial manufacturing. Knowledge of ISO 9001, IATF 16949, AS9100, or other regulated frameworks. How you work Kaizen mindset Lean manufacturing principles Single-piece flow orientation Tools & technologies NetSuite (ERP), CAD platforms, and advanced Excel Life at Powerus Build systems that matter, with a team that values precision, speed, and integrity. Your work will directly shape how autonomous platforms are produced and scaled.

Job Description Job Description Job Title : Operations Technician Location : Morrisville, NC D ivision: NHanced Semiconductor Shift Options: 1st Shift: 7:00 AM to 4:00 PM or 2nd Shift: 3:30 PM to 11:30 PM About Us: Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company's portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications. Scope of the Job: The Operations Technician is responsible for supporting semiconductor wafer processing operations within a cleanroom manufacturing environment. This role plays a critical part in keeping wafers moving through production by operating equipment, handling materials, performing inspections, maintaining accurate process records, and supporting basic equipment maintenance activities. The ideal candidate is detail-oriented, mechanically inclined, able to follow standardized procedures, and interested in building a long-term career within semiconductor manufacturing. Duties / Responsibilities: Operate and monitor semiconductor manufacturing equipment (e.g., photolithography, etching, deposition, or testing tools). Load and unload wafers or substrates from process equipment. Inspect wafers and components visually and/or using microscopes or automated systems. Perform minor equipment maintenance and troubleshooting. Accurately record data in logs or computer systems. Follow detailed work instructions, process documentation, and cleanroom protocols. Maintain high standards of cleanliness and contamination control. Collaborate with engineers and technicians to report and resolve production issues. Adhere to safety procedures and wear proper personal protective equipment (PPE) at all times. Work in shifts, including nights, weekends, and holidays if required. Required Skills & Experience: High School Diploma or GED. Minimum 1+ year of experience in a manufacturing, laboratory, pharmaceutical, cleanroom, or similar regulated production environment. Basic computer proficiency and ability to learn production software systems. Strong attention to detail and ability to follow written instructions precisely. Demonstrated problem-solving abilities and willingness to learn new processes. Comfortable working around chemicals and manufacturing equipment. Ability to work independently and collaboratively within a team environment. Reliable attendance and commitment to quality workmanship. Additional Preferred Skills: Associate degree in Engineering Technology, Chemistry, Science, or related field. Semiconductor manufacturing experience. Experience handling wafers or working in a cleanroom environment. Experience in pharmaceutical manufacturing or laboratory operations. Knowledge of ISO 9001, cGMP, GMP, or other regulated manufacturing standards. Background working with chemicals or chemical processes. Experience with statistical process control (SPC) concepts. Personal Skills: Strong manual dexterity and fine motor skills. Quick learner with a positive attitude and strong work ethic. Effective communication skills. Team-oriented and collaborative mindset. Passion for manufacturing, technology, or continuous improvement. Interest in career growth and advancement within semiconductor manufacturing. Commitment to producing high-quality work and following established procedures. Technical Skills: Able to process wafers in a flexible development environment Able to operate multiple metrology tools Work Environment & Physical Requirements Strong manual dexterity and fine motor skills. Work primarily in a fully gowned cleanroom environment. Wear required PPE, including safety glasses, gloves, face shields, and steel-toe shoes. Stand and walk for extended periods throughout the shift. Handle wafers, tools, and manufacturing equipment daily. Lift and move materials up to 50 lbs. Frequently bend, reach, and perform repetitive tasks. Quantum Computing Inc. (QCi) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Incumbent(s) in this position may be required to perform other duties and special assignments not specifically stated above. Statements outlined in this section are designated as essential job functions in accordance with the Americans with Disabilities Act of 1990.

Job Description Job Description This position be on-site 4-5 days a week Job Summary The Release Train Engineer (RTE) will serve as a servant leader, coach, and facilitator for an Agile Release Train (ART) supporting Federal Government, Department of Defense (DoD), and government contractor programs. This role is responsible for leading SAFe execution, improving delivery flow, aligning teams and leadership, and driving Agile transformation across multiple divisions. The ideal candidate is a proactive servant leader with strong facilitation, communication, and organizational leadership skills who can build alignment across teams, leadership, and stakeholders. This role requires someone who can drive accountability, provide clear direction, effectively communicate priorities, and foster a culture of collaboration, transparency, and continuous improvement across the ART. Responsibilities Lead and facilitate core SAFe events (PI Planning, ART Syncs, Scrum of Scrums, System Demos, and Inspect & Adapt workshops). Coordinate cross-team/cross-division dependencies to ensure alignment and value delivery. Guide leadership, Agile teams, Scrum Masters, and Product Owners through SAFe adoption and Lean-Agile practices. Partner closely with teams to resolve operational roadblocks and foster self-organization. Establish standardized Agile processes and DevOps practices. Build and manage Jira/Confluence dashboards to track and communicate ART flow metrics, velocity, risks, and trends to leadership. Ensure ART execution aligns with Federal/DoD contractual milestones and compliance standards (FISMA, FedRAMP, NIST). Basic Qualifications 5+ years of Agile leadership experience (Scrum Master, Agile Coach, PM, or RTE) 2+ years specifically leading ARTs across multiple enterprise divisions. Experience using Jira, Azure DevOps or similar Agile lifecycle management tools U.S. Citizenship required Active/current Secret security clearance required or the ability to obtain and maintain a Secret security clearance. SAFe Release Train Engineer (RTE) certification required If applicable: If you are or have recently been employed by the U.S. Government, a post-employment ethics letter may be required if employment with VSolvit is offered Preferred Qualifications Prior experience navigating Federal Government, DoD, or government contractor programs. Familiarity with government compliance frameworks (NIST, FISMA, FedRAMP). Additional SAFe certifications (such as SAFe Program Consultant / SPC). Company Summary Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Job Description Long Wall Company was created in 2024 to accelerate missile defense technology for the U.S. and our allies. We specialize in ballistic missile defense and are developing Cyclops, a low-cost, mass-producible interceptor. We also produce containerized launchers and offer low-cost targets for threat replication. The future of global security depends on defensive technology that redefines cost, magazine depth, and distribution to deter and defend against evolving threats. Join us. WHAT WE LOOK FOR Mission-Driven Problem Solvers - The problems in missile defense demand ingenuity. We want engineers who approach challenges with curiosity, embrace failure as a learning opportunity, and stay focused on delivering the best solution for the mission. Total Ownership - We seek engineers who take full responsibility for delivering flight-ready work while recognizing that no one succeeds alone. The best engineers make their teammates better, knowing that complementary skills create force multiplication and drive mission success. TEST AND OPERATIONS ENGINEER Test and Operations Engineers are the end users and final guardians of Long Wall hardware and engines before testing, and of the rocket before flight. Test and Operations Engineers oversee everything from hardware testing and vehicle integration to ground systems and payload processing. As a Test and Operations Engineer, you will aid in the development, implementation, and operation of test and launch systems at our Long Beach and El Segundo facilities, our test site in Mojave, and our launch sites. Responsibilities include preparing and operating sites and hardware for engine testing, launch ground system testing, flight hardware testing, and vehicle launch. This role requires a hands-on individual with meticulous attention RESPONSIBILTIIES: Develop, write, and review procedures to integrate hardware and test engines, ground systems, and the launch vehicle Perform test operations (e.g., control room operations) Own projects to design, upgrade, build and maintain Ground Support Equipment (GSE) Work alongside integration technicians build hardware and run operations Prepare and participate in reviews for design, test/operations readiness, and failure/safety analysis Lead or contribute to anomaly resolutions Provide launch and mission operations support Review test data and make go/no-go call on vehicle, test article, and GSE integrity Perform final vehicle closeouts and verify hardware is go for test or flight BASIC QUALIFICATIONS: Minimum of 1+ years of industry, project, or research experience in test/launch operations, hardware design/development, or manufacturing Bachelor's degree in Chemical, Mechanical, or Aerospace Engineering (or related discipline) Willing to travel to support test and launch operations PREFERRED SKILLS AND EXPERIENCES: Demonstrate success in technically focused projects involving hardware design, build, and test of support equipment (mechanical, electrical, electronic, and/or fluids) Experienced with P&ID design and fluid instrumentation and control High-pressure gas experience Ability and willingness to thrive in a fast-paced, rapidly changing work environment Experience with cryogenic systems Experience in low-cost commercial / start-up space ventures Experience with vehicle-level integration, test, and launch operations of flight hardware Familiarity with AFSPCMAN 91-710 and ASME B31.3 Excellent verbal and written communications skills Excellent organizational skills and problem-solving skills Experience with strategic planning, project scoping, budgeting, and scheduling Experience with generating and executing test plans GENERAL REQUIREMENTS: Ability to sit or stand for extended periods of time Ability to use a computer to complete assignments Ability to communicate with individuals and groups in person, by phone and telepresence Ability to pick up to 50lbs While performing the duties of this job, the employee will typically work in an office environment Ability to travel up to 25% of the time This is the lowest-to-highest compensation range we reasonably and in good faith believe we would pay for this role at the time of this posting. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee's pay position within the salary range will be based on several factors, including, but not limited to, relevant education, qualifications, certifications, experience, skills, geographic location, performance, and business or organizational needs. In addition to base pay and equity, we offer: Heavily employer-subsidized medical, dental, and vision insurance plans Long Wall paid life insurance and LTD coverage 4% 401k match Student loan repayment assistance program Paid parental leave Family planning assistance program Long Wall paid financial wellness program Paid time off for non-exempt employees and a flexible vacation policy for exempt employees ITAR Requirement This position requires access to information protected under US export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, US person status (including US citizens, U.S. permanent residents, individuals granted U.S. asylum status, or individuals admitted in U.S. refugee status) is a required qualification for this position. Equal Opportunity Employer We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work and access export-controlled data) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. We encourage applicants of all ages.

Job Description Job Description I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. C. Respirators, half mask cartridge respirators plus goggles, or full face cartridge respirators may be required in designated areas or under prescribed work conditions. VIII. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description JOB TITLE: Technical Leader I JOB GRADE: NE10 FLSA STATUS: Nonexempt DEPARTMENT NAME: NGKACU DEPARTMENT NUMBER: NGKACU REPORTS TO: Supervisor I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Supervisor or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description Date Posted: 6-12-2026 Date Removed: 6-19-2026 Position: Continuous Tech Lead Department: Continuous Pay Grade: NE10 Shift: D-Shift (7:30PM-7:45AM 4on / 4off) Reminder: If you apply for a position and it is offered to you, and you decline the position, you will have to wait 6 months after posting for another position. Posting for a position after the deadline will disqualify you. (If posting is not able to be removed as soon as the 5pm deadline.) LATERAL MOVES ARE NOW ALLOWED WITH THE REVISED JOB BID SYSTEM. This requisition will be posted on the NGK recruiting board for 7 days. Members should also consider the following requirements after applying for a position. You must be on your current job for one (1) year if your job grade is 7 or lower. You must be in your current job for a minimum of two (2) years for job grades 8 or higher due to the more technical nature of the jobs. No disciplinary actions within the last year (low level points warnings may be waived if there are special circumstances that can be, or are, documented). Meet the minimum requirements of the open job description. Completion of the current learner's assessment and other training requirements. Completed Career Readiness Certificate (CRC). Members should be mindful of the shift, area, and job duties after applying for a job so as not to risk a six-month waiting period to apply for a future opportunity. The members should carefully consider all these factors to avoid rejecting a job offer. I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job . click apply for full job details

Job Description Job Description JOB TITLE: Technical Leader I JOB GRADE: NE10 FLSA STATUS: Nonexempt DEPARTMENT NAME: NGKACU DEPARTMENT NUMBER: NGKACU REPORTS TO: Supervisor I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Supervisor or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.