36 jobs found

Job Description Job Description POSITION DESCRIPTION AND REQUIREMENTS : As integral part of our team, the Voice Systems Trainer will provide stand-up classroom training in to train Information Management Specialists (IMS), Information Management Technical Specialists (IMTS), locally engaged staff (LES), Diplomatic Security (DS) and employees from other U.S. Government agencies on a variety of telephone/voice and data networking systems and related equipment. LOCATION OF POSITION : Arlington, VA. Candidate must be able to travel overseas for a period of up to 2 weeks (potential frequency: 1-2 times per year). REQUIRED CERTIFICATIONS & EXPERIENCE MUST INCLUDE: Successful candidate must have a minimum of five years of experience and working knowledge of voice systems engineering, standard installation practices, operations and maintenance procedures. Experience delivering classroom instruction in an adult environment is a must. Instructors must be dynamic while on podium. Infrastructure - Background and working knowledge of voice and data systems engineering, standard installation, operation and maintenance procedures are required. Understanding of telephony and networking terminology, and industry standards. Must have the ability to explain and communicate these items to a novice level. Experience in teaching voice and/or data networking. Programming and maintaining Avaya family of switches including CS1000E Call Server. Vendor Certification is desired. Programming and maintaining voice mail systems such as Call Pilot, or Cisco Unity Connection. Programming and maintaining advanced Avaya, Call Pilot, or Cisco Unity Connection. Creation and/or delivery of online digital content. Identifying and resolving QOS, routing, and real time communications problems. Minimum Cisco Certified Network Associate (CCNA) level certification required within 180 days of starting work. Certified Technical Trainer (CTT ) certification; if no certification at entry on duty, must Obtain the CTT certification or complete the Department of State Training Tradecraft course (PD505) within 180 days of starting work. DESIRED KNOWLEDGE AND EXPERIENCE: Experience in teaching voice and/or data networking. Call Accounting Systems - Background and working knowledge of Call Detail Recording for Avaya/Meridian Systems. Ability to work with and configure third party Call Accounting Systems such as Phoneware CallBill. Telecommunication Security understanding of the National Telecommunications Security (NTS) Working Group (WG), formerly known as the Telecommunications Security Group (TSG) guidelines are desired Curriculum design Creation and/or delivery of online digital content. Security Clearance required Candidates must be clearable at the Secret Level. Interim secret clearance required to start working. GENERAL DUTIES FOR ALL LEVELS OF VOICE TRAINERS: Teach courses as assigned. Also be responsible for the classroom, which includes setting up computers, virtual labs, and instruction material. In addition, prepare student evaluations to include performance and learning deficiencies. Conduct student counseling and recommend corrective action to ensure acceptable student performance. Must have excellent organizational, interpersonal, and communication skills, both oral and written, and be able to present state of the art training concepts and methodologies using Department of State delivery technology to students within the Department and other government agencies. Must have experience as an instructor in adult-oriented, technical training environment and comprehensive knowledge of training methods and behavior sciences associated with adult education instruction. Special Projects as required, to include but not limited to, attending special seminars and training, to gather information for exercise and curriculum development and presentations. Must have ability to consult with customers, analyze requirements, and develop, revise, and/or adapt instruction materials to meet the functional needs of Department of State employees. Update curriculums and courseware for courses as required to meet industry and DOS standards. Design and participate in workshops, seminars, and review sessions. Assist in the development and revision of industry standard training. This may involve, among other issues, choosing the most appropriate COTS course material. Design classroom seminars and workshops to meet the needs of specialized users as needed. Provide one-on-one tutoring and review sessions from time-to-time to augment classroom and online training. During the performance of the contract, the contractor will be required to provide professional and technical experience as described above. Must be able to travel to domestic and overseas locations to conduct training. Must work with other instructors to physically install/configure new equipment for the classroom training environment, including the replacement of failed electronics that provide the training platforms for students. Must adhere to established SAIT policies, processes, and procedures.

Overview Join a team where innovation meets mission. Our AI, cloud, cyber, and modernization solutions save agencies thousands of hours, safeguard national security, and strengthen health and humanitarian missions worldwide. With more than 1,700+ team members, 1,500+ AI & data experts, and 100+ prime contracts, we deliver on a scale and with purpose. We've been recognized as a Top Workplace by The Washington Post for six consecutive years and named to the Inc. 5000 list of Fastest-Growing Private Companies in 13 of the past 14 years. Credence is a welcoming environment for those looking to grow and make a meaningful impact. We encourage employees to push boundaries and help solve critical, world-changing federal challenges. Position Summary Credence has an upcoming need for a Senior Program Manager who will be primarily responsible for supporting the Air Force Life Cycle Management Center WAM (AFLCMC/WAM) directorate, F-16 division at WPAFB, OH. F-16 "Viper" AFLCMC/WAM is headquartered at Hill Air Force Base with units located at Wright-Patterson Air Force Base, Tyndall Air Force Base, Eglin Air Force Base, and Davis-Monthan Air Force Base. The F-16 "Viper" is a multi-role fighter jet delivering air-to-air, air-to-ground, and surveillance capabilities for the United States Air Force (USAF) and Coalition Partners. Responsibilities include, but are not limited to the duties listed below Assist in risk management, cost, schedule, and performance of various software development efforts in a program management role, and report on them monthly through use of the Project Management Resource Tool (PMRT). Assist to interpret, organize, execute and coordinate assignments within the context of the Government acquisition process. Assist to explore software development and integration, definition of scope, and selection of problems for investigation. Support the program director at executive levels within the Government and other Contractor organizations, including major program reviews, inspections, conferences, and other program evaluations and major milestone events. Assist to establish and maintain contacts between the program office, supporting Government offices, other Contractors, and higher headquarters' mid-to upper-level staff. Assist with the analysis of war fighter requirements with ACC and serve as key advisor to F-16 Division leadership on mission-critical capability trades. Support war fighter Urgent Operational Needs (UONs), and support UON execution teams through recommendation of accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost. Support the OFP software development and testing processes, interpreting user requirements, and possesses a thorough understanding of the MNFP cost-sharing process. Assist with strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations. Assist to apply integration, communication, coordination, organizational, and planning expertise to technical and acquisition efforts across multiple F-16 integration activities. Support Technical Interchange Meetings (TIMs) and working groups, serving as a liaison between user requirements and organic engineering activity. Assist to develop concise, coherent program status briefings to senior staff. Support the chief engineer in investigation and resolution of fielded program deficiencies, to include support of Crisis Management Teams (CMTs). Support and conduct studies and analysis of tradeoffs for incorporation of potential capabilities in future USAF OFP software. Advise and assist the Government with complex program management tasks, coordinating and managing multiple contracts, and identifying and confirming the annual funding requirements for those contracts. Assist with project cost estimates and have knowledge of the system engineering process and project Configuration Management (CM) requirements. Assist to investigate, analyze, plan, design, develop, implement, and evaluate solutions for project / program efforts; provide expert-level issue resolution and recommendation support to achieve desired program outcomes to situations that may include, but not be limited to, the following functional areas: program management, logistics, maintenance, supply, financial management (FM), test, security management, information management, and contracting. Support efforts including, but not limited to, strategic planning, program planning, systems integration, weapons integration, requirements assessment, and program evaluations. Assist to apply broad user war fighter requirements and applying solutions through the acquisition process. Define requirements with ACC and serve as key advisor to System Program Office (SPO) leadership on mission critical capability trades. Support programs in an international environment, including support to implement the requirements of foreign governments. Support development and test activities required to support warfighter UON. Support UON execution teams by recommending accelerated test concepts, minimum levels of integration required to satisfy operational need, and trade-offs among risk, schedule, performance, and cost. Assist with interpreting user requirements, to implement the MNFP cost sharing process. Assist with management of risk, cost, schedule, and performance of various OFP software development efforts. Assist with integration, communication, coordination, organizational, and planning support to technical and acquisition processes across multiple F-16 integration activities. Support F-16 avionics and weapons capabilities; complex weapon(s) integration; aircraft operations and employment; development of F-16 PVI; OFP software requirements development; development processes under the MNFP; aircraft mission and support equipment; authorized aircraft configurations and capabilities; aircraft subsystems; systems integration; advanced sensor integration. Coordinate the upgrade identification and requirements development process for new USAF hardware integration and software development programs. The Contractor shall complete program technical assessments and assist with developing cost estimates in support of the integration and software-development programs. The Contractor shall support Government/Contractor work-share agreements between LM Aero to organic software development at OO-ALC, for development efforts and support complex subsystem integration/coordination for advanced sensors, weapons, and electronic warfare equipment. Support the transition and stand-up of an organic software development capability for F-16 to assess and coordinate unique requirements and funding timelines. Assist with management of test execution, integration and sustainment support of various software upgrades such as the Automatic Ground Collision Avoidance System (AGCAS) integration in current OFP software. Support the Avionics System Requirements Review Conference (ASRRC) and Cockpit Review Team (CRT) process for initial requirements definition, and Pilot Vehicle Interface (PVI) development to support HQ ACC initiatives. Assist with bridging process between acquisition and user communities such as military fighter/bomber pilots, navigators, weapons systems officers, and software development. Support studies and analysis of tradeoffs for incorporation of potential capabilities in future F-16 USAF or FMS software. Manage the software supporting AESA radar design try-out activities for radar risk reduction. Support and conduct preparations and review pertinent data, coordinate with applicable managers, and finalize related documentation/information for verbal presentation of the plan status at required meetings. Meetings may include but are not limited to IPT meetings, Program Management Reviews (PMRs), TIMs, and other required conferences. Assist in the preparation of concise, coherent program status briefing charts to support meetings with senior staff. Support the F-16 Chief Engineer in investigation and resolution of fielded program deficiencies, to include support of CMT. Serve as lead technical advisor to the materiel leader for the F-16, supporting senior leader efforts in identifying cost efficiencies for aircraft trainer/simulator programs. Requirements Clearance: Top Secret Master's or Doctoral Degree in a related field and a minimum of ten (10) years of experience in the respective technical / professional discipline being performed, at least five (5) of which must be in the DoW/DoD or Bachelor's Degree in a related field and a minimum of twelve (12) years of experience in the respective technical/professional discipline being performed, five (5) of which must be in the DoW/DoD or fifteen (15) years of directly related experience with proper certifications, eight (8) of which must be in the DoW/DoD. Preferred: Minimum of ten (10) years of experience with fighter/bomber, or related aircraft experience with detailed knowledge of all USAF program requirements and recommend at least five of those years be direct F-16 and an understanding of fighter weapons systems integration operational employment and weapons capability and software development processes, USAF Major Command expertise, ideally at the Headquarters (HQ) USAF or HQ ACC level . click apply for full job details

Job Description Job Description SciTec, a Firefly Aerospace Company, is a dynamic non-traditional defense contractor that delivers advanced technologies in support of U.S. National Security and Defense. For the past forty-five plus years, we have supported Department of Defense customers by developing innovative remote sensing algorithms, tools, and techniques to deliver world-class data exploitation capabilities supporting missile defense; intelligence, surveillance, & reconnaissance; space domain awareness; and aircraft survivability missions. Important Notice: SciTec exclusively works on U.S. government contracts that require U.S. citizenship for all employees. SciTec cannot sponsor or assume sponsorship of employee work visas of any type. Further, U.S. citizenship is a requirement to obtain and keep a security clearance. Applicants that do not meet these requirement will not be considered. SciTec is seeking a Hardware Integration Engineer to support the Ground Based Radar Digitization (GBRD) modernization program. In this role, you will focus on the integration of modern radar front end hardware-including digitizers, transceivers, timing/synchronization components, and associated control interfaces-into a unified digital backend architecture. You will work across radar hardware teams, RF specialists, systems engineers, and software processing teams to ensure that modern front end hardware integrates seamlessly with mission critical backend processing. Responsibilities Front End Hardware Integration Integrate modern radar front end subsystems (digitizers, transceivers, control electronics, digital transceiver components) with digitized radar back end signal processing chains. Ensure element level digitization produces validated, high fidelity I/Q data streams suitable for backend processing. Collaborate with RF engineers to verify operating characteristics and compatibility with each radar's unique antenna systems. Support Interface Definition & System Alignment Develop and maintain interface specifications between front end hardware and the modernized digital backend. Ensure alignment with MOSA principles and common architectural standards. Work closely with systems engineers to ensure hardware to software interactions meet timing, throughput, and synchronization constraints. Integration Testing & Troubleshooting Support integration in lab environments, performing functional tests, data validation checks, and end to end link testing. Diagnose and resolve issues related to hardware configuration, signal integrity, timing alignment, data path reliability, and high bandwidth throughput. Work with backend RSP/RMP teams to ensure hardware driven measurements and transmission instructions flow correctly. Requirements, Configuration Control & Documentation Contribute to requirements decomposition for hardware integration, defining performance, interface, and environmental needs. Maintain configuration control of hardware integration artifacts, diagrams, ICDs, test plans, and verification results. Support technical reviews (SRR, PDR, CDR, TRR) with clear hardware integration inputs. Cross Team Collaboration Coordinate with RF engineers, systems engineers, software processing teams, mission processing teams, and cybersecurity personnel to ensure cohesive system behavior. Ensure front end hardware integration supports mission focused outcomes in alignment with the common digital baseline. Other duties as assigned Requirements Bachelor's or Master's in Electrical Engineering, Systems Engineering, Physics, or related field. 8+ years of experience integrating hardware for radar, RF systems, high bandwidth sensor systems, or real time mission systems. Experience with digitizers, transceivers, RF electronics, timing/synchronization hardware, or data acquisition equipment. Understanding of signal integrity concepts, analog to digital conversion, and high bandwidth data flows. Familiarity with lab integration environments (SIL/DSIL) and hardware in the loop testing. Ability to read and produce interface control documents, wiring diagrams, and system integration artifacts. Experience collaborating across hardware, software, RF, and systems engineering teams. Strong communication skills and ability to convey integration status clearly. U.S. Citizenship with ability to obtain and maintain a DoD security clearance. Candidates who have any of the following skills will be preferred: Experience with radar systems. Experience integrating radar front end components with digitized backend architectures. Familiarity with FORGE, MOSA, or government owned mission processing frameworks. Experience with RF test equipment (spectrum analyzers, VNAs, signal generators), digitizer calibration, or high speed data capture systems. Experience supporting integration events, mission scenario validation, or gated prototyping programs. Active DoD security clearance. Resumes, Cover Letters, and Applications which are generated by AI will not be considered for employment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Benefits SciTec offers a highly competitive salary and benefits package, including: 4% Safe Harbor 401(k) match 100% company paid HSA Medical insurance, with a choice of 2 buy-up options 80% company paid Dental insurance 100% company paid Vision insurance 100% company paid Life insurance 100% company paid Long-term Disability insurance Short-term Disability insurance Annual Profit-Sharing Plan Discretionary Performance Bonus Paid Parental Leave Generous Paid Time Off, including Holiday, Vacation, and Sick Pay Flexible Work Hours The pay range for this position is $190,000- $235,000 / year. SciTec considers several factors when extending an offer of employment, including but not limited to the role and associated responsibilities, a candidate's work experience, education/training, and key skills. This is not a guarantee of compensation. SciTec is proud to be an Equal Opportunity employer. VET/Disabled.

Job Description Job Description Position Title : Senior Loudspeaker Systems Engineer (Acoustics / Hardware / DSP) Location : Lawrence, KS Department : Product Development (ML - R&D) Reports To : Sr. Project Manager (Martin Logan - ML) Job Type : Full-Time Company Overview : Martin Logan (ML) is a renowned manufacturer of high-fidelity premium audio equipment, specializing in electrostatic and hybrid loudspeakers. Founded in 1983 in Lawrence Kansas, ML has become a leader in innovative speaker design, offering exceptional sound quality and sophisticated aesthetics. We at ML are seeking a skilled and motivated Electronic Designer to join our dynamic team of professionals and contribute to our cutting-edge projects. Position Summary : We are seeking a visionary Senior Loudspeaker Systems Engineer to pioneer the next generation of our world-class, high-end speaker systems. In this role, you will own the entire acoustic and electro-mechanical signal chain. You will bridge the gap between physical transducer mechanics, premium analog/digital hardware, and advanced digital signal processing (DSP). From customizing bespoke driver architectures to programming precision active crossovers and room-correction filters, your work will directly define the signature sonic luxury and breathtaking imaging our brand is celebrated for. Key Responsibilities: Electro-Acoustic System Design: Architect high-performance, multi-way active and passive loudspeaker systems, optimizing the synergy between cabinets, custom drivers, and electronics. Premium Electronics Design: Develop audiophile-grade, low-noise analog input stages, ultra-clean DAC/ADC paths, and robust power delivery networks. Advanced DSP & Crossover Design: Architect and implement analog/digital crossover networks, phase correction, dynamic protection algorithms, and boundary/room-compensation filters. Advanced Lab Metrology: Lead exhaustive objective validation using state-of-the-art diagnostic tools (e.g., Klippel R&D systems, Audio Precision). Critical Listening: Conduct structured, subjective double-blind listening tests to "voice" the loudspeaker, gracefully balancing perfect engineering data with emotional musicality. Qualifications: Education: Bachelor's or Master's degree in Electrical Engineering or Acoustical Engineering, Software Engineering (with an acoustics focus) Experience: 7+ years designing high-end consumer, studio monitor, car audio, or professional concert-level loudspeaker electronics systems DSP & Simulation Tools: Proficiency in analog filter as well as DSP filter mathematics with the ability to use Mathcad, Matlab, or specialized design software for designing and simulating passive and active and DSP filter behaviors and the resulting acoustic responses Mixed-Signal Circuit Design : Proven track record of designing low-distortion analog and digital circuits, schematics and PCB layouts optimized for audio signal integrity Preferred Qualifications: Embedded Software: Experience writing embedded C and/or configuring dedicated audio DSP architectures (e.g. Analog Device SigmaDSP or Dream DSP). Audio Precision: Experience setting up Audio precision systems for quality control and using the equipment for design validation. Software : C# experience helpful for in house software maintenance. Equal Opportunity Employer : ML is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. As part of the Fighting Against Forced Labour and Child Labour in Supply Chains Act (the"Act"), Paradigm Electronics Inc. will not employe any children under the age of 15, by taking special precautions to safeguard the health, security, and rights of persons under the age of 18 and ensure that they do not perform any hazardous work. We are committed to an inclusive, equitable and accessible workplace where all employees are valued. Accommodations are available upon request for candidates participating in our selection process.

Job Description Job Description Overview About M.C. Dean M.C. Dean is Building Intelligence . We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. We are seeking a Deployment Network Engineer 4 to join our Security and Electronic Systems (SES) business Unit. As part of (SES) Strategic Business Unit you will be part of a team that designs, engineers, integrates, operates and maintains electronic security services inclusive of intrusion detection, access control, biometric authentication, video surveillance, audio visual, it systems, perimeter defense and command and control systems for federal, local and commercial customers across high-growth markets. Responsibilities Summary Deployment Network Engineering staff will primarily support the O&M Network Engineer in Pre-Installation, on site Deployment and go-live testing. This includes preparing and performing on-site network surveys at customer sites, participate in the infrastructure configuration and testing activities prior to deployment and directly involved in the hands-on implementation at customer site. Deployment Network Engineers are responsible for all the documentation and revisions of each deployment and provide feedback to the O&M Network Engineer for future deployment improvements. The job is 100% on-site work at customer facilities. No teleworking is anticipated. Domestic and international travel is expected. Candidate duties, responsibilities and skill sets needed to be successful: Candidates must be detail oriented, with excellent communication skills (both written and verbal), ability to communicate with all levels of the organization and to present complex and technical concepts to non-technical team members. An ability to learn new technologies quickly An ability to develop and follow processes and standard operating procedures. Deployment of network equipment and technology, with working knowledge in network device, configuration, able use device command line interfaces (CLI) and make configuration changes as needed Have strong analytical and problem-solving skills. Candidates are expected to perform root cause analysis to troubleshoot & identify issues at all layers of the network. Experience with cloud provider environments such as AWS and Azure, with IL-2 or higher experience a plus Working knowledge of WAN technology and deployment and troubleshooting different communication circuit types. Understanding of layer 1 technologies and their capabilities and limitations, including cable management, cable types, media converters, circuits to include CPE, Telco & Demark, etc. Experience in creating network diagrams, rack elevations, and cable drawings. System configuration based on DoD security policy and guideline. Candidates are expected to configure, troubleshoot and manage network security across a multi-enclave environment. Installation experience with routers, switches, firewalls and Security and Encryption appliances Understanding of networking protocols and technologies (e.g., IPSEC, HSRP, BGP, MPLS, QoS) Juniper/HPE/JUNOS experience is a plus Qualifications Clearance/Citizen Type: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; Top Secret with SCI eligibility required Key Requirements Bachelor's Degree in Engineering, Computer Science, Information Technology (IT) or a related discipline 7+ years Progressive Experience Strong communication skills and experience using ticketing. DoD Manual 8140 Cyberspace Workforce Qualification Certification for Intermediate level Network Operations Specialist DCWF Code 441 Must hold a valid driver's license and ability to obtain a passport for international travel. Ability to identify cable colors, markings or labels. We offer an excellent benefits package including: A competitive salary Medical, dental, vision, life, and disability insurance Paid time off Tuition reimbursement 401k Retirement Plan Military Reserve pay offset Paid maternity leave What we offer: A collaborative team inspired by the way engineering and innovation enhance customer outcomes, improve lives, and change the world for the better. We are driven by our core values of agility, expertise, and trust. An opportunity to lead and build a business with the support of an industry-leading firm that has been in business for 75 years. Investment in your skills and expertise through a combination of professional and technical training programs, including leadership training and tuition reimbursement. Open and transparent communication with senior leadership as well as local office management. Abilities: Exposure to computer screens for an extended period of time. Sitting for extended periods of time. Reach by extending hands or arms in any direction. Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. Listen to and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so others will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense. Identify and understand the speech of another person.

Job Description Job Description Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. Quality Control Tech shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned. Perform shipboard/alteration inspections referencing MIL-STD's, NAVSEA Standard Items, and MIL-SPEC's. Provide detailed reports documenting all "As Found" conditions during inspection, including Quality Assurance Workbook. Verify proper documentation of all required repairs and communicate identified deficiencies to production to initiate corrective actions. Ensure that all test and inspection documentation is accounted for and thoroughly completed prior to certification. Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP). Certification ISO Lead Auditor Training a plus Certified Quality Inspector Certification NAVSEA Connector Certification NAVSEA Cableway Certification NAVSEA Fiber Optic QA/Supervisor Training Structural fit-up, welding, pipefitting, and NDT Level II experience/qualification is a plus. Active OSHA 7615 Maritime Training 10hr Card Shipyard Competent Person Responsibilities Specific duties and responsibilities: Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook. Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence. Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures. Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction. Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience. Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements. Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations. Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations. Qualifications Other Required Skills Active secret security clearance desirable Clearance: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ability to obtain a Secret clearance is required. High school diploma with 6+ years of experience. Candidate must be able/willing to travel in CONUS/OCONUS ISO Lead Auditor Training a plus Fiber Optic Connector QA/Build training Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards. Must have or be able to obtain a passport Abilities Exposure to computer screens for an extended period of time. Sitting for extended periods of time. Reach by extending hands or arms in any direction. Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. Listen to and understand information and ideas presented through spoken words and sentences. Communicate information and ideas in speaking so others will understand. Read and understand information and ideas presented in writing. Apply general rules to specific problems to produce answers that make sense. Identify and understand the speech of another person.

Job Description Job Description Who We Are APCON designs and assembles industry-leading network visibility and security technologies in the United States, supporting some of the world's largest and fastest networks. Our solutions provide continuous, high fidelity visibility into network traffic, which helps organizations optimize performance, strengthen security, and protect mission critical systems. From data filtering to advanced packet processing, we deliver the tools enterprises need to monitor, secure, and manage their environments with confidence. We are a team that values innovation, collaboration, and engineering excellence, and we are committed to building the next generation of network technology. We are collaborative, innovative, and committed to excellence. We are looking for a Hardware Engineer who reflects these values. This role is fully on site. Candidates selected to move forward will complete our standard prescreening process, which includes a background check and drug screen. We can only consider applicants who are legally authorized to work in the United States and who do not require current or future visa sponsorship. About The Role APCON is seeking a Hardware Engineer II with strong experience in board level digital hardware design. This role focuses on designing the physical electronics that power our network visibility and switching products, including embedded processors, switch ASICs, DDR4 or DDR5 memory subsystems, and the surrounding high speed digital circuitry. Our products run on Linux based embedded platforms and are used across a wide range of industries. What You Will Do Design and develop digital hardware circuits Integrating embedded processors, switch ASICs, DDR4 or DDR5 memory, SRAM, and supporting digital logic Create schematics and guide PCB layout with attention to signal integrity and power integrity • Implement and validate SPI, I2C, UART, GPIO, and other digital peripheral interfaces Perform board bring up, hardware and board debugging Collaborate with software, FPGA, and manufacturing teams to ensure hardware and software integration Support sustaining engineering and hardware improvements across product lifecycles What You Bring BS in Electrical Engineering or an equivalent combination of education and experience Three to six years of digital hardware design experience Experience integrating embedded processors or switch ASICs Strong understanding of high-speed digital design principles Ability to read schematics, guide PCB layout, and debug hardware at the board level Experience with network switching hardware or other complex embedded systems Experience with SERDES, high speed interfaces, or multi gigabit signaling Why Join APCON Employee only medical and dental coverage fully paid on our base plan Additional plan option available with cost sharing Medical, dental, and vision coverage available for dependents with cost sharing Company paid short and long term disability Flexible spending accounts Generous paid time off that supports employee well being 401(k) plan with a company match to support long term financial security Professional development program Volunteer time off and employee assistance plan Collaborative and innovative work environment Onsite Exercise Facility APCON is an EEO Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. Offers are contingent on the successful completion of pre-employment background and drug screenings.

Job Description Job Description Divergent is building the new industrial age. Every day, our teams design, manufacture, and assemble advanced systems for some of the world's most demanding industries. Our integrated engineering and manufacturing platform transforms complex designs into production-ready solutions, helping customers move faster, build smarter, and deliver critical systems when they matter most. Divergent is a qualified Tier 1 supplier to global automotive OEMs and supports leading U.S. aerospace and defense companies. Join us and help push the boundaries of what can be built. Purpose Divergent is transforming manufacturing through our Adaptive Production System (DAPS), revolutionizing how complex structures are designed, built, and assembled. We are seeking an experienced CMM Programmer to ensure the precision, repeatability, and quality of our manufactured components. This position is ideal for a seasoned metrology professional who excels in high-mix, high-precision environments and is passionate about pushing the boundaries of automated inspection and data-driven quality systems. The Role Metrology Programming & Execution Develop, optimize, and execute CMM programs using PC-DMIS on Hexagon systems to inspect precision components. Perform hands-on CMM operation and dimensional analysis for additively manufactured and machined parts. Interpret complex engineering drawings and GD&T to create accurate, repeatable measurement strategies. Collaborate with engineering, machining, and quality teams to resolve dimensional issues and improve manufacturability. Support development of automated and integrated inspection processes , connecting metrology data with manufacturing systems and analysis tools. Technical Collaboration & Knowledge Sharing Partner with technicians and engineers to improve understanding of measurement results, root-cause analysis, and CMM program intent. Contribute to the creation of standard work procedures and best practices for CMM programming and inspection across the organization. Provide technical feedback to support continuous skill growth within the quality and production teams. Process Improvement & Technology Advancement Continuously refine measurement strategies to reduce cycle time and enhance accuracy . Evaluate and integrate emerging metrology technologies , such as laser scanning, structured light, and non-contact inspection. Collaborate on fixturing design and tooling selection to improve repeatability and part accessibility. Ensure measurement practices comply with ISO 9001, AS9100, and IATF 16949 standards and internal quality processes. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls Advanced proficiency in CMM programming and metrology within a precision or high-mix manufacturing environment. Expert-level skill with PC-DMIS and Hexagon CMM systems (or equivalent). Strong understanding of GD&T and the ability to interpret and apply it to complex 3D geometries. Proven ability to troubleshoot and resolve metrology-related manufacturing challenges . Experience with standard precision tools (micrometers, calipers, bore gauges, surface plates). Analytical approach to data review, measurement variation, and process feedback . Excellent communication skills and ability to work cross-functionally in a collaborative engineering environment. Preferred Qualifications Experience with non-contact metrology (laser scanning, structured light, photogrammetry). Familiarity with Python, C++, or VB for data automation or process scripting. Experience integrating CMM data with MES, SPC, or CAD/CAM systems . Background in aerospace, defense, or high-performance automotive manufacturing . Additional Requirements Candidates will complete an on-site technical skills demonstration ( Work Environment Manufacturing and lab environments with frequent interaction across production, machining, and quality teams. Requires use of PPE (safety glasses, gloves, hearing protection) and adherence to all safety standards. Ability to lift up to 25 lbs and stand for extended periods during equipment setup or inspection. Compensation oAt Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels T03 - T05 as evaluated through our interview process. T03 / Programmer III: $45.00 - $54.00 T04 / Programmer IV: $52.00 - $63.00 Pay Range $45-$63 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Job Description Divergent is building the new industrial age. Every day, our teams design, manufacture, and assemble advanced systems for some of the world's most demanding industries. Our integrated engineering and manufacturing platform transforms complex designs into production-ready solutions, helping customers move faster, build smarter, and deliver critical systems when they matter most. Divergent is a qualified Tier 1 supplier to global automotive OEMs and supports leading U.S. aerospace and defense companies. Join us and help push the boundaries of what can be built. Purpose Divergent is transforming manufacturing through our Adaptive Production System (DAPS), revolutionizing how complex structures are designed, built, and assembled. We are seeking an experienced CMM Programmer to ensure the precision, repeatability, and quality of our manufactured components. This position is ideal for a seasoned metrology professional who excels in high-mix, high-precision environments and is passionate about pushing the boundaries of automated inspection and data-driven quality systems. The Role Metrology Programming & Execution Develop, optimize, and execute CMM programs using PC-DMIS on Hexagon systems to inspect precision components. Perform hands-on CMM operation and dimensional analysis for additively manufactured and machined parts. Interpret complex engineering drawings and GD&T to create accurate, repeatable measurement strategies. Collaborate with engineering, machining, and quality teams to resolve dimensional issues and improve manufacturability. Support development of automated and integrated inspection processes , connecting metrology data with manufacturing systems and analysis tools. Technical Collaboration & Knowledge Sharing Partner with technicians and engineers to improve understanding of measurement results, root-cause analysis, and CMM program intent. Contribute to the creation of standard work procedures and best practices for CMM programming and inspection across the organization. Provide technical feedback to support continuous skill growth within the quality and production teams. Process Improvement & Technology Advancement Continuously refine measurement strategies to reduce cycle time and enhance accuracy . Evaluate and integrate emerging metrology technologies , such as laser scanning, structured light, and non-contact inspection. Collaborate on fixturing design and tooling selection to improve repeatability and part accessibility. Ensure measurement practices comply with ISO 9001, AS9100, and IATF 16949 standards and internal quality processes. Basic Qualifications Ability to lawfully access information and technology that is subject to US export controls Advanced proficiency in CMM programming and metrology within a precision or high-mix manufacturing environment. Expert-level skill with PC-DMIS and Hexagon CMM systems (or equivalent). Strong understanding of GD&T and the ability to interpret and apply it to complex 3D geometries. Proven ability to troubleshoot and resolve metrology-related manufacturing challenges . Experience with standard precision tools (micrometers, calipers, bore gauges, surface plates). Analytical approach to data review, measurement variation, and process feedback . Excellent communication skills and ability to work cross-functionally in a collaborative engineering environment. Preferred Qualifications Experience with non-contact metrology (laser scanning, structured light, photogrammetry). Familiarity with Python, C++, or VB for data automation or process scripting. Experience integrating CMM data with MES, SPC, or CAD/CAM systems . Background in aerospace, defense, or high-performance automotive manufacturing . Additional Requirements Candidates will complete an on-site technical skills demonstration ( Work Environment Manufacturing and lab environments with frequent interaction across production, machining, and quality teams. Requires use of PPE (safety glasses, gloves, hearing protection) and adherence to all safety standards. Ability to lift up to 25 lbs and stand for extended periods during equipment setup or inspection. Compensation oAt Divergent, our pay range is based on the level of the job. For this role, we will consider candidates at levels T03 - T05 as evaluated through our interview process. T03 / Programmer III: $45.00 - $54.00 T04 / Programmer IV: $52.00 - $63.00 Pay Range $45-$63 USD What We Offer: Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions. Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time. Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind. Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance. Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.