it job board logo
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
  • Recruiting? Post a job
  • Sign in
  • Sign up
  • Home
  • Find IT Jobs
  • Register CV
  • Register as Employer
  • Contact us
  • Career Advice
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

31 jobs found

Email me jobs like this
Refine Search
Current Search
medical device verification test engineer
Principal Embedded Software Engineer
CYNET Systems Waltham, Massachusetts
Pay Range: $65.00hr - $70.00hr Required Qualifications: Bachelor's or Master's degree in Computer Science, Software Engineering, Computer Engineering, Electrical Engineering, Biomedical Engineering, or a related technical discipline. Typically + years of professional embedded software or firmware development experience. Demonstrated experience operating at Principal Engineer, Senior Staff Engineer, Software Architect, or equivalent technical-leadership level. Strong hands-on experience developing embedded software in C and/or C++. Experience developing software for regulated medical devices, IVD systems, healthcare products, or another safety-critical regulated industry. Experience with the complete embedded software lifecycle, including requirements, architecture, design, implementation, integration, verification, release, and maintenance. Strong understanding of embedded-system architecture and hardware-software interaction. Experience debugging complex embedded systems using appropriate hardware and software tools. Experience developing and maintaining multithreaded, real-time, or event-driven embedded applications. Experience with embedded operating systems, embedded Linux, or real-time operating systems. Experience with device drivers, hardware abstraction, communication interfaces, and peripheral integration. Strong understanding of software architecture, modular design, state machines, memory management, concurrency, and fault handling. Experience with source control, configuration management, code reviews, defect tracking, and controlled software releases. Ability to analyze and improve large or legacy embedded codebases. Experience producing high-quality technical and software lifecycle documentation. Strong analytical, troubleshooting, and root-cause-analysis skills. Ability to lead technical work through influence without direct management authority. Strong verbal and written communication skills. Embedded Technical Skills: Advanced C and/or C++ development. Embedded Linux and/or RTOS development. Multithreaded and real-time software design. Low-level firmware and device-driver development. Hardware abstraction layer design. Board bring-up and hardware-software integration. Inter-process communication and event-driven architectures. Serial and hardware communication protocols such as UART, SPI, I C, USB, CAN, or Ethernet. Network communication and device-connectivity protocols. Memory, performance, timing, and resource optimization. Error handling, fault detection, diagnostics, logging, and recovery mechanisms. Unit testing, integration testing, static analysis, and code-coverage analysis. Debugging tools such as JTAG, oscilloscopes, logic analyzers, protocol analyzers, and embedded debuggers. Build systems, cross-compilation toolchains, and CI/CD pipelines. Secure coding and embedded cybersecurity principles. Medical-Device Responsibilities: Develop software in compliance with applicable quality-system procedures. Ensure that embedded software development follows IEC 62304 lifecycle processes. Support software safety classification and risk-based development activities. Contribute to hazard analysis and software-related risk assessment. Implement and document software risk-control measures. Maintain traceability between requirements, risks, architecture, implementation, and verification. Produce or review software development plans, requirements, architecture, detailed designs, test documentation, anomaly assessments, and release records. Support Design History File creation and remediation. Participate in formal design reviews. Ensure unresolved software anomalies are properly evaluated and documented. Support software validation, regulatory submissions, audits, and inspections. Contribute to cybersecurity threat analysis, vulnerability assessment, and remediation. Regulatory and Standards Experience: Practical experience with several of the following: IEC 62304. ISO 13485. ISO 14971. FDA Design Controls. FDA 21 CFR Part 820. FDA guidance for medical-device software. IEC 62366-1. FDA cybersecurity guidance. EU MDR or IVDR. Secure software-development lifecycle practices. Medical-device verification and validation. Preferred Qualifications: Experience with point-of-care or in-vitro diagnostic devices. Job Responsibilities: Provide technical leadership for embedded software development and sustaining-engineering activities. Design, implement, debug, test, and maintain embedded software and firmware for medical devices. Define and evolve embedded software architecture, component boundaries, interfaces, and data flows. Analyze legacy software to understand existing behavior, architecture, dependencies, and technical limitations. Resolve complex software, firmware, hardware-integration, performance, reliability, and field issues. Translate system and product requirements into clear, testable software requirements and technical designs. Decompose system-level requirements into embedded software components and interfaces. Ensure alignment between software requirements, architecture, detailed design, implementation, risk controls, and verification evidence. Participate in and lead technical reviews, software design reviews, code reviews, and root-cause investigations. Collaborate with electrical and systems engineers on hardware-software interfaces, sensors, communication protocols, diagnostics, and device behavior. Develop low-level drivers, device-control logic, hardware abstraction layers, communication components, and application-level embedded functionality. Support integration between embedded devices and external systems such as middleware, host applications, hospital networks, or cloud services. Perform technical impact analysis for software changes, defects, anomalies, component updates, and cybersecurity vulnerabilities. Support software remediation by identifying gaps between documented requirements and implemented behavior. Create or update software lifecycle documentation required for the Design History File. Ensure complete bidirectional traceability between requirements, risks, design, code, tests, defects, and release evidence. Collaborate with V&V and Software Quality teams to define verification approaches and improve testability. Support unit, integration, system, regression, performance, reliability, and cybersecurity testing. Investigate field-reported issues and support corrective and preventive actions. Support controlled software builds, releases, configuration management, and design changes. Contribute to product risk analysis and ensure that software-related risk controls are properly implemented and verified. Support internal audits, regulatory inspections, and submission-related activities. Mentor software engineers and promote effective embedded-development and documentation practices. Identify architectural improvements and technical-debt reduction opportunities. Drive continuous improvement of software engineering processes, tools, code quality, and development efficiency. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
10/29/2026
Full time
Pay Range: $65.00hr - $70.00hr Required Qualifications: Bachelor's or Master's degree in Computer Science, Software Engineering, Computer Engineering, Electrical Engineering, Biomedical Engineering, or a related technical discipline. Typically + years of professional embedded software or firmware development experience. Demonstrated experience operating at Principal Engineer, Senior Staff Engineer, Software Architect, or equivalent technical-leadership level. Strong hands-on experience developing embedded software in C and/or C++. Experience developing software for regulated medical devices, IVD systems, healthcare products, or another safety-critical regulated industry. Experience with the complete embedded software lifecycle, including requirements, architecture, design, implementation, integration, verification, release, and maintenance. Strong understanding of embedded-system architecture and hardware-software interaction. Experience debugging complex embedded systems using appropriate hardware and software tools. Experience developing and maintaining multithreaded, real-time, or event-driven embedded applications. Experience with embedded operating systems, embedded Linux, or real-time operating systems. Experience with device drivers, hardware abstraction, communication interfaces, and peripheral integration. Strong understanding of software architecture, modular design, state machines, memory management, concurrency, and fault handling. Experience with source control, configuration management, code reviews, defect tracking, and controlled software releases. Ability to analyze and improve large or legacy embedded codebases. Experience producing high-quality technical and software lifecycle documentation. Strong analytical, troubleshooting, and root-cause-analysis skills. Ability to lead technical work through influence without direct management authority. Strong verbal and written communication skills. Embedded Technical Skills: Advanced C and/or C++ development. Embedded Linux and/or RTOS development. Multithreaded and real-time software design. Low-level firmware and device-driver development. Hardware abstraction layer design. Board bring-up and hardware-software integration. Inter-process communication and event-driven architectures. Serial and hardware communication protocols such as UART, SPI, I C, USB, CAN, or Ethernet. Network communication and device-connectivity protocols. Memory, performance, timing, and resource optimization. Error handling, fault detection, diagnostics, logging, and recovery mechanisms. Unit testing, integration testing, static analysis, and code-coverage analysis. Debugging tools such as JTAG, oscilloscopes, logic analyzers, protocol analyzers, and embedded debuggers. Build systems, cross-compilation toolchains, and CI/CD pipelines. Secure coding and embedded cybersecurity principles. Medical-Device Responsibilities: Develop software in compliance with applicable quality-system procedures. Ensure that embedded software development follows IEC 62304 lifecycle processes. Support software safety classification and risk-based development activities. Contribute to hazard analysis and software-related risk assessment. Implement and document software risk-control measures. Maintain traceability between requirements, risks, architecture, implementation, and verification. Produce or review software development plans, requirements, architecture, detailed designs, test documentation, anomaly assessments, and release records. Support Design History File creation and remediation. Participate in formal design reviews. Ensure unresolved software anomalies are properly evaluated and documented. Support software validation, regulatory submissions, audits, and inspections. Contribute to cybersecurity threat analysis, vulnerability assessment, and remediation. Regulatory and Standards Experience: Practical experience with several of the following: IEC 62304. ISO 13485. ISO 14971. FDA Design Controls. FDA 21 CFR Part 820. FDA guidance for medical-device software. IEC 62366-1. FDA cybersecurity guidance. EU MDR or IVDR. Secure software-development lifecycle practices. Medical-device verification and validation. Preferred Qualifications: Experience with point-of-care or in-vitro diagnostic devices. Job Responsibilities: Provide technical leadership for embedded software development and sustaining-engineering activities. Design, implement, debug, test, and maintain embedded software and firmware for medical devices. Define and evolve embedded software architecture, component boundaries, interfaces, and data flows. Analyze legacy software to understand existing behavior, architecture, dependencies, and technical limitations. Resolve complex software, firmware, hardware-integration, performance, reliability, and field issues. Translate system and product requirements into clear, testable software requirements and technical designs. Decompose system-level requirements into embedded software components and interfaces. Ensure alignment between software requirements, architecture, detailed design, implementation, risk controls, and verification evidence. Participate in and lead technical reviews, software design reviews, code reviews, and root-cause investigations. Collaborate with electrical and systems engineers on hardware-software interfaces, sensors, communication protocols, diagnostics, and device behavior. Develop low-level drivers, device-control logic, hardware abstraction layers, communication components, and application-level embedded functionality. Support integration between embedded devices and external systems such as middleware, host applications, hospital networks, or cloud services. Perform technical impact analysis for software changes, defects, anomalies, component updates, and cybersecurity vulnerabilities. Support software remediation by identifying gaps between documented requirements and implemented behavior. Create or update software lifecycle documentation required for the Design History File. Ensure complete bidirectional traceability between requirements, risks, design, code, tests, defects, and release evidence. Collaborate with V&V and Software Quality teams to define verification approaches and improve testability. Support unit, integration, system, regression, performance, reliability, and cybersecurity testing. Investigate field-reported issues and support corrective and preventive actions. Support controlled software builds, releases, configuration management, and design changes. Contribute to product risk analysis and ensure that software-related risk controls are properly implemented and verified. Support internal audits, regulatory inspections, and submission-related activities. Mentor software engineers and promote effective embedded-development and documentation practices. Identify architectural improvements and technical-debt reduction opportunities. Drive continuous improvement of software engineering processes, tools, code quality, and development efficiency. Benefits: Our Benefits Include: Medical, Dental, and Vision Insurance 401(k) Retirement Plan Health Savings Account (HSA) Disability Insurance (Short-Term and Long-Term) Life and AD&D Insurance Paid Sick Leave (where required by applicable state or local law) Supplemental Insurance Plans Identity Theft Protection Pet Insurance Employee Wellness Programs Employee Assistance Program (EAP) Career Growth and Professional Development Opportunities Disclaimer: Benefits eligibility, accrual rates, and usage limits may vary based on employment status, length of service, and work location. Paid Sick Leave is provided in strict accordance with applicable state and municipal mandates. Cynet Systems Inc. reserves the right to modify, amend, or terminate any benefit plans at any time in accordance with applicable laws. About Cynet Systems Founded in 2010 and headquartered in the Washington, DC metro area, Cynet Systems Inc. is a leading technology staffing and workforce solutions company serving Fortune 500 companies, government agencies, and enterprise organizations across the United States and Canada. We deliver agile, scalable talent solutions across IT, engineering, life sciences, clinical, and professional staffing, powered by a high-performing recruitment engine operating across North America and Asia. As a nationally and locally certified Minority Business Enterprise (MBE), Cynet Systems is committed to helping organizations build high-performing teams while empowering professionals to grow rewarding careers. Our organization is certified to ISO 9001, ISO 14001, ISO 27001, and SOC 2 Type II standards, reflecting our commitment to quality, security, operational excellence, and customer success.
Systems Engineer- Weston, FL
Matlen Silver Fort Lauderdale, Florida
Job Description Job Title: System Engineer Duration: 12 months Location:Weston, FL Job Summary: Job Description: Systems Engineers provide leadership for products and projects that involve multi-disciplinary engineering teams. They play roles in all aspects of a product lifecycle from Concept through Market Release and Sustaining. During the Concept Phase, Systems Engineers work to understand stakeholder needs and clinical use. They translate those needs to concepts and new inventions. During Development, Systems Engineers are responsible for ensuring the design meets the user needs through requirements identification and requirements decomposition. They achieve results using a variety of system engineering techniques such as: traceability, architecture, modeling, trade studies, simulation, and budgeting. Systems Engineers are also responsible for system integration and may lead the Verification effort. The best Systems Engineers are driven leaders, excellent communicators, creative problem solvers, domain experts, and can balance multiple competing priorities. This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles typically require a university degree or an extensive amount of practical knowledge gained through experience. Job requires an understanding and application of procedures and concepts of own discipline. The job requires the ability to make judgements based on practice and previous experience. This job typically requires a degree or equivalent and no experience. Robotics is more key here Write requirements Understanding the methodologies How we integrate components and pieces together Test development Matlab preferred (program in matlab) System engineering in general • Systems Engineering • Location: Weston (on-site). • Focus: High-level system integration, architectural perspective, and requirement writing. Key Candidate Requirements • Design vs. Maintenance: Candidates must have experience designing electronics and controls from scratch. Those with only PLC or manufacturing robotics experience (e.g., Fanuc/Kuka) are not a fit. • Industry Background: Medical device experience is strongly preferred due to familiarity with 60601 standards. However, candidates from Aerospace or Space industries are acceptable if they have strong PCB and component-level design experience. • Technical Skills (Systems): Proficiency in MATLAB and Simulink is preferred for interfacing with the system. About Matlen Silver Experience Matters. Let your experience be driven by our experience. For more than 40 years, Matlen Silver has delivered solutions for complex talent and technology needs to Fortune 500 companies and industry leaders. Led by hard work, honesty, and a trusted team of experts, we can say that Matlen Silver technology has created a solutions experience and legacy of success that is the difference in the way the world works. Matlen Silver is an Equal Opportunity Employer and considers all applicants for all positions without regard to race, color, religion, gender, national origin, age, sexual orientation, veteran status, the presence of a non-job-related medical condition or disability, or any other legally protected status. If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at email and/or phone at: At The Matlen Silver Group, Inc., W2 employees are eligible for the following benefits: Health, vision, and dental insurance (single and family coverage) 401(k) plan (employee contributions only)
10/29/2026
Full time
Job Description Job Title: System Engineer Duration: 12 months Location:Weston, FL Job Summary: Job Description: Systems Engineers provide leadership for products and projects that involve multi-disciplinary engineering teams. They play roles in all aspects of a product lifecycle from Concept through Market Release and Sustaining. During the Concept Phase, Systems Engineers work to understand stakeholder needs and clinical use. They translate those needs to concepts and new inventions. During Development, Systems Engineers are responsible for ensuring the design meets the user needs through requirements identification and requirements decomposition. They achieve results using a variety of system engineering techniques such as: traceability, architecture, modeling, trade studies, simulation, and budgeting. Systems Engineers are also responsible for system integration and may lead the Verification effort. The best Systems Engineers are driven leaders, excellent communicators, creative problem solvers, domain experts, and can balance multiple competing priorities. This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles typically require a university degree or an extensive amount of practical knowledge gained through experience. Job requires an understanding and application of procedures and concepts of own discipline. The job requires the ability to make judgements based on practice and previous experience. This job typically requires a degree or equivalent and no experience. Robotics is more key here Write requirements Understanding the methodologies How we integrate components and pieces together Test development Matlab preferred (program in matlab) System engineering in general • Systems Engineering • Location: Weston (on-site). • Focus: High-level system integration, architectural perspective, and requirement writing. Key Candidate Requirements • Design vs. Maintenance: Candidates must have experience designing electronics and controls from scratch. Those with only PLC or manufacturing robotics experience (e.g., Fanuc/Kuka) are not a fit. • Industry Background: Medical device experience is strongly preferred due to familiarity with 60601 standards. However, candidates from Aerospace or Space industries are acceptable if they have strong PCB and component-level design experience. • Technical Skills (Systems): Proficiency in MATLAB and Simulink is preferred for interfacing with the system. About Matlen Silver Experience Matters. Let your experience be driven by our experience. For more than 40 years, Matlen Silver has delivered solutions for complex talent and technology needs to Fortune 500 companies and industry leaders. Led by hard work, honesty, and a trusted team of experts, we can say that Matlen Silver technology has created a solutions experience and legacy of success that is the difference in the way the world works. Matlen Silver is an Equal Opportunity Employer and considers all applicants for all positions without regard to race, color, religion, gender, national origin, age, sexual orientation, veteran status, the presence of a non-job-related medical condition or disability, or any other legally protected status. If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at email and/or phone at: At The Matlen Silver Group, Inc., W2 employees are eligible for the following benefits: Health, vision, and dental insurance (single and family coverage) 401(k) plan (employee contributions only)
Logistician - Secret Clearance Charleston, SC
Cambridge International Systems Inc Adams Run, South Carolina
Job Description Job Description Logistician - Secret Clearance Charleston, SC Cambridge International Systems, Inc. Join a dynamic global team united by shared values: commitment, integrity, and perseverance. At Cambridge, you'll work alongside top talent worldwide, tackling some of today's most complex and critical challenges in defense and security. We are currently seeking a Logistician to support operations in Charleston, SC. This is a full-time CONUS position requiring an active DoD Secret clearance. What You'll Do As a Logistician, you will play a critical role in supporting the Naval Information Warfare Center Atlantic (NIWC Atlantic) Expeditionary Enterprise Systems and Services (E2S2) Division. NIWC Atlantic provides design, acquisition, and sustainment services for Marine Corps Systems Command (MCSC) Information Technology (IT) systems, that serve U.S. government missions. This role falls under Logistician within our compensation framework. This position reports to Steve Dellinger. You will: Ensures that the product/service and process meet quality and safety standards. Testing equipment to make sure that the process operates effectively and safely. Interpret plans and drawings and contribute to the design and fabrication of test specimens. Computer aided drafting (CAD), ability to prepare shop drawings for model construction, and be familiar with material specifications and fabrication methods. Material management (shipping, receiving, movement between locations, etc.) Inventory control (counts, issuing, maintaining stock) Review and analyze records in inventory management systems (GCSS-MC, CMPro, etc.) Familiarity with MS Office suite (especially Excel) This role requires exceptional communication and active listening skills, with an emphasis on clarity, consistency, and collaborative dialogue. The successful candidate will maintain ongoing, proactive communication with leadership to ensure alignment, support informed decision making, and foster a strong, transparent working relationship. Assesses and facilitates the company's logistical functions. Inspect logistical areas for process improvement and cost savings. Ascertains supply requirements from authorization documents. Arranges the flow of goods in the company. What You'll Bring Required Qualifications: Must be proficient in using different technologies such as computers and other tools and systems pertinent to the position. Education & Experience: High School diploma/GED, related military experience, or trade/industrial school graduate. 5 years professional experience solving technical problems. Technical Expertise: Strong Trained in the skills and techniques related to engineering and/or software design/maintenance. Possess a practical understanding of engineering concepts. Clearance: Must have a current and active DoD Secret security clearance. Physical & Work Environment Requirements Periods of prolonged sitting and/or standing, including desk-based computer work. Travel between work locations, including company offices, customer sites, and government installations. Transport and use of work equipment, such as laptops and job-related tools, during site visits. Work is performed in a secure facility where personal electronic devices (including Bluetooth- or Wi-Fi-enabled devices) may be restricted. Work may be performed in industrial or potentially hazardous environments, including around heavy machinery and moving equipment. Regular exposure to outdoor conditions and varying weather. Physical activities may include bending, lifting, carrying, pushing, and pulling materials, consistent with established one-person lift guidelines. Use of tools, equipment, and machinery as required for the role. Work at elevated heights using ladders, scaffolding, boom lifts, or scissor lifts. Communication with team members, customers, and stakeholders through verbal and written methods. Ability to manage competing priorities, work under deadlines, and maintain attention to detail. Interaction with others in dynamic environments, including situations requiring problem-solving and conflict resolution. Background & Security Employment is contingent upon successful background investigation Benefits & Perks We believe in investing in our team-both professionally and personally: Medical, dental, vision, life, accident, and critical illness insurance 401(k) immediate vesting and match Paid time off and company holidays Generous tuition & training support Relocation assistance Sign-on and performance-based bonuses Employee referral program Access to Tickets at Work, EAP, wellness initiatives, and more Join Us If you're driven by mission, technology, and teamwork-we want to hear from you. Cambridge is growing, and this position is just one of many opportunities on our global team. Know someone perfect for the role? Referrals are welcome-both employees and non-employees may qualify for a bonus. Apply today and help shape the future of secure cloud computing for national security. About Cambridge International Systems At Cambridge, we recognize innovation and agility grow through teamwork. By working collaboratively, listening proactively, and engaging across functions we create solutions that build on the best ideas our employees bring to the table. We are committed to one another, to persevere in order to get the job done, and to do so with integrity every time. Learn more at . We are an equal opportunity employer. Applicants and employees are considered for positions and are evaluated without regard to any protected status under applicable law or other similar factors that are not job-related. We encourage all qualified individuals to apply for employment. Selected applicants may be subject to a background investigation and/or education verification. We provide reasonable accommodation for qualified individuals with disabilities in accordance with federal, state, and local law. If you require a reasonable accommodation to participate in the application process or to perform the essential functions of the position, please contact our Recruiting Team at . Powered by JazzHR c5Jc108shx
10/28/2026
Full time
Job Description Job Description Logistician - Secret Clearance Charleston, SC Cambridge International Systems, Inc. Join a dynamic global team united by shared values: commitment, integrity, and perseverance. At Cambridge, you'll work alongside top talent worldwide, tackling some of today's most complex and critical challenges in defense and security. We are currently seeking a Logistician to support operations in Charleston, SC. This is a full-time CONUS position requiring an active DoD Secret clearance. What You'll Do As a Logistician, you will play a critical role in supporting the Naval Information Warfare Center Atlantic (NIWC Atlantic) Expeditionary Enterprise Systems and Services (E2S2) Division. NIWC Atlantic provides design, acquisition, and sustainment services for Marine Corps Systems Command (MCSC) Information Technology (IT) systems, that serve U.S. government missions. This role falls under Logistician within our compensation framework. This position reports to Steve Dellinger. You will: Ensures that the product/service and process meet quality and safety standards. Testing equipment to make sure that the process operates effectively and safely. Interpret plans and drawings and contribute to the design and fabrication of test specimens. Computer aided drafting (CAD), ability to prepare shop drawings for model construction, and be familiar with material specifications and fabrication methods. Material management (shipping, receiving, movement between locations, etc.) Inventory control (counts, issuing, maintaining stock) Review and analyze records in inventory management systems (GCSS-MC, CMPro, etc.) Familiarity with MS Office suite (especially Excel) This role requires exceptional communication and active listening skills, with an emphasis on clarity, consistency, and collaborative dialogue. The successful candidate will maintain ongoing, proactive communication with leadership to ensure alignment, support informed decision making, and foster a strong, transparent working relationship. Assesses and facilitates the company's logistical functions. Inspect logistical areas for process improvement and cost savings. Ascertains supply requirements from authorization documents. Arranges the flow of goods in the company. What You'll Bring Required Qualifications: Must be proficient in using different technologies such as computers and other tools and systems pertinent to the position. Education & Experience: High School diploma/GED, related military experience, or trade/industrial school graduate. 5 years professional experience solving technical problems. Technical Expertise: Strong Trained in the skills and techniques related to engineering and/or software design/maintenance. Possess a practical understanding of engineering concepts. Clearance: Must have a current and active DoD Secret security clearance. Physical & Work Environment Requirements Periods of prolonged sitting and/or standing, including desk-based computer work. Travel between work locations, including company offices, customer sites, and government installations. Transport and use of work equipment, such as laptops and job-related tools, during site visits. Work is performed in a secure facility where personal electronic devices (including Bluetooth- or Wi-Fi-enabled devices) may be restricted. Work may be performed in industrial or potentially hazardous environments, including around heavy machinery and moving equipment. Regular exposure to outdoor conditions and varying weather. Physical activities may include bending, lifting, carrying, pushing, and pulling materials, consistent with established one-person lift guidelines. Use of tools, equipment, and machinery as required for the role. Work at elevated heights using ladders, scaffolding, boom lifts, or scissor lifts. Communication with team members, customers, and stakeholders through verbal and written methods. Ability to manage competing priorities, work under deadlines, and maintain attention to detail. Interaction with others in dynamic environments, including situations requiring problem-solving and conflict resolution. Background & Security Employment is contingent upon successful background investigation Benefits & Perks We believe in investing in our team-both professionally and personally: Medical, dental, vision, life, accident, and critical illness insurance 401(k) immediate vesting and match Paid time off and company holidays Generous tuition & training support Relocation assistance Sign-on and performance-based bonuses Employee referral program Access to Tickets at Work, EAP, wellness initiatives, and more Join Us If you're driven by mission, technology, and teamwork-we want to hear from you. Cambridge is growing, and this position is just one of many opportunities on our global team. Know someone perfect for the role? Referrals are welcome-both employees and non-employees may qualify for a bonus. Apply today and help shape the future of secure cloud computing for national security. About Cambridge International Systems At Cambridge, we recognize innovation and agility grow through teamwork. By working collaboratively, listening proactively, and engaging across functions we create solutions that build on the best ideas our employees bring to the table. We are committed to one another, to persevere in order to get the job done, and to do so with integrity every time. Learn more at . We are an equal opportunity employer. Applicants and employees are considered for positions and are evaluated without regard to any protected status under applicable law or other similar factors that are not job-related. We encourage all qualified individuals to apply for employment. Selected applicants may be subject to a background investigation and/or education verification. We provide reasonable accommodation for qualified individuals with disabilities in accordance with federal, state, and local law. If you require a reasonable accommodation to participate in the application process or to perform the essential functions of the position, please contact our Recruiting Team at . Powered by JazzHR c5Jc108shx
Hardware Engineer
Manufacturing Inc Southbridge, Massachusetts
Job Description Job Description We are seeking an experienced Hardware Engineer with a minimum of five years of hands-on expertise in electronic Design , PCB development, and production release. This position focuses on leading custom Design lifecycles for human-machine interface controls, integrating both electrical engineering and mechanical engineering concepts with a strong emphasis on low-power IT hardware and Medical device applications. The ideal Hardware Engineer will take ownership of hardware from initial Prototyping through regulatory verification, Manufacturing transfer, and ongoing field support. Benefits and Compensation Competitive Pay: $110k - $140k/yr DOE to start! If you are transitioning from another Accounting role, we offer great starting rates for our second-shift hours. Comprehensive Benefits: Includes premium health insurance (medical, dental, vision) and eligibility for an incentive recognition bonus program. Responsibilities Include Circuit Design & Layout: Design analog, digital, and mixed-signal embedded electronics . Execute component selection, circuit calculations, schematic capture, and PCB layout oversight. System Integration: Work alongside firmware and mechanical engineering specialists to integrate hardware assemblies, support IT system requirements, and resolve complex technical trade-offs. Prototyping & Diagnostics: Perform Prototyping evaluation, board bring-up, and electronics troubleshooting using standard laboratory equipment to resolve hardware issues. Regulatory & Verification: Define hardware testing criteria, collaborate with test teams, and ensure all Medical device documentation aligns with regulatory standards. Manufacturing & Lifecycle: Facilitate a smooth Manufacturing transfer, evaluate component substitutions, and provide ongoing technical support to Manufacturing teams. Skills / Qualifications Required: Experience: 5+ years as a Hardware Engineer or in a related electrical engineering role taking complex electronics from concept to production. Education: Bachelor's degree in electrical engineering , computer engineering, or a related technical discipline. Design & Layout: Strong expertise in Design analysis, embedded microcontrollers, schematic capture, and multi-layer PCB design. Testing & Assembly: Demonstrated hands-on Prototyping experience, diagnostic capabilities, and cross-functional collaboration with mechanical engineering teams. Technical Skills: Sound technical writing skills and a background supporting cross-discipline IT and engineering infrastructure. Preferred: Previous experience developing products within a regulated Medical device environment. Familiarity with Altium Designer, magnetic sensing systems, and wireless compliance testing. What's In It For You The opportunity to own end-to-end hardware development for innovative Medical device products. Exposure to cross-functional projects integrating IT , firmware, and hardware engineering disciplines. A competitive salary with health benefits and performance incentive opportunities. Apply Today! Ready to take the next step in your career? Whether you have experience in manufacturing, general production, or manufacturing Warehouse Logistics, join a team that values high-performance grit! Apply today by submitting your resume. We look forward to reviewing your application. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, or veteran status.
10/28/2026
Full time
Job Description Job Description We are seeking an experienced Hardware Engineer with a minimum of five years of hands-on expertise in electronic Design , PCB development, and production release. This position focuses on leading custom Design lifecycles for human-machine interface controls, integrating both electrical engineering and mechanical engineering concepts with a strong emphasis on low-power IT hardware and Medical device applications. The ideal Hardware Engineer will take ownership of hardware from initial Prototyping through regulatory verification, Manufacturing transfer, and ongoing field support. Benefits and Compensation Competitive Pay: $110k - $140k/yr DOE to start! If you are transitioning from another Accounting role, we offer great starting rates for our second-shift hours. Comprehensive Benefits: Includes premium health insurance (medical, dental, vision) and eligibility for an incentive recognition bonus program. Responsibilities Include Circuit Design & Layout: Design analog, digital, and mixed-signal embedded electronics . Execute component selection, circuit calculations, schematic capture, and PCB layout oversight. System Integration: Work alongside firmware and mechanical engineering specialists to integrate hardware assemblies, support IT system requirements, and resolve complex technical trade-offs. Prototyping & Diagnostics: Perform Prototyping evaluation, board bring-up, and electronics troubleshooting using standard laboratory equipment to resolve hardware issues. Regulatory & Verification: Define hardware testing criteria, collaborate with test teams, and ensure all Medical device documentation aligns with regulatory standards. Manufacturing & Lifecycle: Facilitate a smooth Manufacturing transfer, evaluate component substitutions, and provide ongoing technical support to Manufacturing teams. Skills / Qualifications Required: Experience: 5+ years as a Hardware Engineer or in a related electrical engineering role taking complex electronics from concept to production. Education: Bachelor's degree in electrical engineering , computer engineering, or a related technical discipline. Design & Layout: Strong expertise in Design analysis, embedded microcontrollers, schematic capture, and multi-layer PCB design. Testing & Assembly: Demonstrated hands-on Prototyping experience, diagnostic capabilities, and cross-functional collaboration with mechanical engineering teams. Technical Skills: Sound technical writing skills and a background supporting cross-discipline IT and engineering infrastructure. Preferred: Previous experience developing products within a regulated Medical device environment. Familiarity with Altium Designer, magnetic sensing systems, and wireless compliance testing. What's In It For You The opportunity to own end-to-end hardware development for innovative Medical device products. Exposure to cross-functional projects integrating IT , firmware, and hardware engineering disciplines. A competitive salary with health benefits and performance incentive opportunities. Apply Today! Ready to take the next step in your career? Whether you have experience in manufacturing, general production, or manufacturing Warehouse Logistics, join a team that values high-performance grit! Apply today by submitting your resume. We look forward to reviewing your application. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, or veteran status.
Senior Hardware Engineer
Yantran LLC Richland, Michigan
Job Description Job Description Job Title: Sr Hardware Engineer Location: Richland, CA Onsite/ Remote: Day 1 Onsite at customer location The pay range for this role is k- k per annum including any bonuses or variable pay. also offers benefits like medical, vision, dental, life, disability insurance and paid time off (including holidays, parental leave, and sick leave, as required by law). Ask our recruiters for more details on our Benefits package. The exact offer terms will depend on the skill level, educational qualifications, experience, and location of the candidate. Qualifications: B.S/M.S -Electrical /Electronics Experience: 8-10 yrs in Industrial Domain Hardware engineers must be fluent in the following: Altium Designer SPICE MS Office Excel, Visio, Word, etc. Hardware engineers must be familiar with the following: Autodesk Inventor Ansys Electronics Desktop Enovia PLM Git (version control concepts and workflow) Azure DevOps Responsibilities of hardware engineer: Schematic Design Support the creation of printed circuit boards by creating logical drawings of interconnected electronic components by: Select components Planning and implementation of analog and digital circuits Creation of component entries and assist in curation of the ECAD library (device symbols, footprints, models, and attributes) Conducting analysis, simulation, and calculations of electronic and electrical circuits Layout Design: Support the creation of printed circuit boards by converting schematic diagrams into physically routed paths by: Creating and updating component footprints/land patterns in the ECAD design library Determining the optimal placement of components and PCB features for EMC/EMI performance, power integrity, signal integrity, thermal management, mechanical shock and vibration, manufacturing, assembly, and test processes Ensuring electronic components are compatible with and can be integrated with the mechanical product design Conducting analysis, simulation, and calculations for power integrity, signal integrity, thermal characteristics, and EMC Hardware Test Engineering - Verification of electronic hardware through the following activities: Assisting in ensuring the hardware design satisfies the product functional requirements, performance characteristics identified in the high-level design, detail design specification, and technical documentation Designing, planning, or setting requirements for necessary test equipment and/or test software Hardware module testing and verification including parametric, functional, EMC/EMI, environmental, or other engineering evaluation testing Authors and maintains the Electronic Test Specification documents Drafting, Documentation, and Sustainment - Assist in the release and versioning of technical documentation Prepare schematic, fabrication, assembly, BOM packages for release in PLM system Contribute to and participate in reviews of reports, documentation and designs Assist in component lifecycle activities Assist in hardware drawing updates is an Equal Employment Opportunity employer. We promote and support a diverse workforce at all levels of the company. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, age, national origin or disability. All applicants will be evaluated solely on the basis of their ability, competence, and performance of the essential functions of their positions with or without reasonable accommodations. Reasonable accommodations also are available in the hiring process for applicants with disabilities. Candidates can request a reasonable accommodation by contacting the company ADA Coordinator at .
10/28/2026
Full time
Job Description Job Description Job Title: Sr Hardware Engineer Location: Richland, CA Onsite/ Remote: Day 1 Onsite at customer location The pay range for this role is k- k per annum including any bonuses or variable pay. also offers benefits like medical, vision, dental, life, disability insurance and paid time off (including holidays, parental leave, and sick leave, as required by law). Ask our recruiters for more details on our Benefits package. The exact offer terms will depend on the skill level, educational qualifications, experience, and location of the candidate. Qualifications: B.S/M.S -Electrical /Electronics Experience: 8-10 yrs in Industrial Domain Hardware engineers must be fluent in the following: Altium Designer SPICE MS Office Excel, Visio, Word, etc. Hardware engineers must be familiar with the following: Autodesk Inventor Ansys Electronics Desktop Enovia PLM Git (version control concepts and workflow) Azure DevOps Responsibilities of hardware engineer: Schematic Design Support the creation of printed circuit boards by creating logical drawings of interconnected electronic components by: Select components Planning and implementation of analog and digital circuits Creation of component entries and assist in curation of the ECAD library (device symbols, footprints, models, and attributes) Conducting analysis, simulation, and calculations of electronic and electrical circuits Layout Design: Support the creation of printed circuit boards by converting schematic diagrams into physically routed paths by: Creating and updating component footprints/land patterns in the ECAD design library Determining the optimal placement of components and PCB features for EMC/EMI performance, power integrity, signal integrity, thermal management, mechanical shock and vibration, manufacturing, assembly, and test processes Ensuring electronic components are compatible with and can be integrated with the mechanical product design Conducting analysis, simulation, and calculations for power integrity, signal integrity, thermal characteristics, and EMC Hardware Test Engineering - Verification of electronic hardware through the following activities: Assisting in ensuring the hardware design satisfies the product functional requirements, performance characteristics identified in the high-level design, detail design specification, and technical documentation Designing, planning, or setting requirements for necessary test equipment and/or test software Hardware module testing and verification including parametric, functional, EMC/EMI, environmental, or other engineering evaluation testing Authors and maintains the Electronic Test Specification documents Drafting, Documentation, and Sustainment - Assist in the release and versioning of technical documentation Prepare schematic, fabrication, assembly, BOM packages for release in PLM system Contribute to and participate in reviews of reports, documentation and designs Assist in component lifecycle activities Assist in hardware drawing updates is an Equal Employment Opportunity employer. We promote and support a diverse workforce at all levels of the company. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, age, national origin or disability. All applicants will be evaluated solely on the basis of their ability, competence, and performance of the essential functions of their positions with or without reasonable accommodations. Reasonable accommodations also are available in the hiring process for applicants with disabilities. Candidates can request a reasonable accommodation by contacting the company ADA Coordinator at .
Hardware Engineer
Yantran LLC Richland, Michigan
Job Description Job Description Job Title: Sr Hardware Engineer Location: Richland, CA Onsite/ Remote: Day 1 Onsite at customer location The pay range for this role is k- k per annum including any bonuses or variable pay. also offers benefits like medical, vision, dental, life, disability insurance and paid time off (including holidays, parental leave, and sick leave, as required by law). Ask our recruiters for more details on our Benefits package. The exact offer terms will depend on the skill level, educational qualifications, experience, and location of the candidate. This role is also open for contract: /hr - /hr Qualifications: B.S/M.S -Electrical /Electronics Experience: 8-10 yrs in Industrial Domain Hardware engineers must be fluent in the following: Altium Designer SPICE MS Office Excel, Visio, Word, etc. Hardware engineers must be familiar with the following: Autodesk Inventor Ansys Electronics Desktop Enovia PLM Git (version control concepts and workflow) Azure DevOps Responsibilities of hardware engineer: Schematic Design Support the creation of printed circuit boards by creating logical drawings of interconnected electronic components by: Select components Planning and implementation of analog and digital circuits Creation of component entries and assist in curation of the ECAD library (device symbols, footprints, models, and attributes) Conducting analysis, simulation, and calculations of electronic and electrical circuits Layout Design: Support the creation of printed circuit boards by converting schematic diagrams into physically routed paths by: Creating and updating component footprints/land patterns in the ECAD design library Determining the optimal placement of components and PCB features for EMC/EMI performance, power integrity, signal integrity, thermal management, mechanical shock and vibration, manufacturing, assembly, and test processes Ensuring electronic components are compatible with and can be integrated with the mechanical product design Conducting analysis, simulation, and calculations for power integrity, signal integrity, thermal characteristics, and EMC Hardware Test Engineering - Verification of electronic hardware through the following activities: Assisting in ensuring the hardware design satisfies the product functional requirements, performance characteristics identified in the high-level design, detail design specification, and technical documentation Designing, planning, or setting requirements for necessary test equipment and/or test software Hardware module testing and verification including parametric, functional, EMC/EMI, environmental, or other engineering evaluation testing Authors and maintains the Electronic Test Specification documents Drafting, Documentation, and Sustainment - Assist in the release and versioning of technical documentation Prepare schematic, fabrication, assembly, BOM packages for release in PLM system Contribute to and participate in reviews of reports, documentation and designs Assist in component lifecycle activities Assist in hardware drawing updates is an Equal Employment Opportunity employer. We promote and support a diverse workforce at all levels of the company. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, age, national origin or disability. All applicants will be evaluated solely on the basis of their ability, competence, and performance of the essential functions of their positions with or without reasonable accommodations. Reasonable accommodations also are available in the hiring process for applicants with disabilities. Candidates can request a reasonable accommodation by contacting the company ADA Coordinator at .
10/28/2026
Full time
Job Description Job Description Job Title: Sr Hardware Engineer Location: Richland, CA Onsite/ Remote: Day 1 Onsite at customer location The pay range for this role is k- k per annum including any bonuses or variable pay. also offers benefits like medical, vision, dental, life, disability insurance and paid time off (including holidays, parental leave, and sick leave, as required by law). Ask our recruiters for more details on our Benefits package. The exact offer terms will depend on the skill level, educational qualifications, experience, and location of the candidate. This role is also open for contract: /hr - /hr Qualifications: B.S/M.S -Electrical /Electronics Experience: 8-10 yrs in Industrial Domain Hardware engineers must be fluent in the following: Altium Designer SPICE MS Office Excel, Visio, Word, etc. Hardware engineers must be familiar with the following: Autodesk Inventor Ansys Electronics Desktop Enovia PLM Git (version control concepts and workflow) Azure DevOps Responsibilities of hardware engineer: Schematic Design Support the creation of printed circuit boards by creating logical drawings of interconnected electronic components by: Select components Planning and implementation of analog and digital circuits Creation of component entries and assist in curation of the ECAD library (device symbols, footprints, models, and attributes) Conducting analysis, simulation, and calculations of electronic and electrical circuits Layout Design: Support the creation of printed circuit boards by converting schematic diagrams into physically routed paths by: Creating and updating component footprints/land patterns in the ECAD design library Determining the optimal placement of components and PCB features for EMC/EMI performance, power integrity, signal integrity, thermal management, mechanical shock and vibration, manufacturing, assembly, and test processes Ensuring electronic components are compatible with and can be integrated with the mechanical product design Conducting analysis, simulation, and calculations for power integrity, signal integrity, thermal characteristics, and EMC Hardware Test Engineering - Verification of electronic hardware through the following activities: Assisting in ensuring the hardware design satisfies the product functional requirements, performance characteristics identified in the high-level design, detail design specification, and technical documentation Designing, planning, or setting requirements for necessary test equipment and/or test software Hardware module testing and verification including parametric, functional, EMC/EMI, environmental, or other engineering evaluation testing Authors and maintains the Electronic Test Specification documents Drafting, Documentation, and Sustainment - Assist in the release and versioning of technical documentation Prepare schematic, fabrication, assembly, BOM packages for release in PLM system Contribute to and participate in reviews of reports, documentation and designs Assist in component lifecycle activities Assist in hardware drawing updates is an Equal Employment Opportunity employer. We promote and support a diverse workforce at all levels of the company. All qualified applicants will receive consideration for employment without regard to race, religion, color, sex, age, national origin or disability. All applicants will be evaluated solely on the basis of their ability, competence, and performance of the essential functions of their positions with or without reasonable accommodations. Reasonable accommodations also are available in the hiring process for applicants with disabilities. Candidates can request a reasonable accommodation by contacting the company ADA Coordinator at .
Systems Engineer Test Technician
Lancesoft Inc Acton, Massachusetts
Job Description Job Description Job Title: Systems Engineer Test Technician Location: Acton Massachusetts 01720 Job Description: Position Overview: The successful candidate will be responsible for supporting and managing materials, tools, and performing various engineering tasks across R&D, supporting existing products and new product initiatives. The general scope includes working with a highly motivated team of dedicated test technicians and experienced engineers in managing R&D materials and assets for ad-hoc or V&V testing purposes (manual and automated), setting up test environments, executing testing, reporting test results, building device prototypes, and maintaining laboratory equipment. The primary objective of this position will be ensuring smooth operation and preparation of mission-critical materials supply and testing to promote robust medical device design, development, and evaluations. Responsibilities: Coordinate with systems, development, and test engineers to understand schedules and equipment needsneed to support project testing activities. Create, build, and set up test fixtures and Building and setting up lab equipment for testing. Ensure proper equipment is ready on time for test execution across projects. Leverage existing tools and automation to execute automated tests and report results across projects and test cycles. Support basic troubleshooting and collecting logs and data for issues observed during testing. Execute manual and automated tests, record results, and document issues using standard tools and processes during project development cycles. Execute dry runs of new and updated manual and automated Test Cases. Support Test Method Validation (TMV), and Measurement System Analysis activities, including Gage R&R studies, documenting and analyzing data. Coordinate with Systems, development, and test engineers when troubleshooting issues and verifying fixes. Write reports and log issues for executed verification tests. Participate in the planning and execution of technical project work. Participate and Support 5S, Ensure lab safety and housekeeping practices. Performs technician tasks deploying standard and advanced techniques. Maintain laboratory equipment by scheduling regular maintenance, interfacing with facilities, service technicians, and responding to equipment issues. Performs other duties as required. Education and Experience: Minimum Requirements: High school diploma or GED 3 yrs experience working in a laboratory environment (preferably in R&D) or a combination of higher-level education 2 yrs experience using Microsoft Office suite (Word, Excel) & technical writing capabilities Preferred Skills and Competencies: Associate degree in an engineering or technical-related field Self-driven, efficient learner and able to perform in a dynamic work environment Equipment Maintenance Planning, organization & detailed oriented Knowledge of scripting and/or programming languages like Python is a plus. Knowledge of Android or iOS technology is a plus. Knowledge of SCM tools (Git, Bitbucket) and CI tools (Jenkins, Bamboo) is a plus. Experience with CAD software (SolidWorks preferred) is a plus. Experience with rapid prototyping tools including 3D printing is a plus. Knowledge of Measurement System Analysis (MSA), including Gage R&R studies. Previous experience working in the Medical Device industry (FDA/ISO regulated) is a plus. Good written and verbal communication skills Physical Requirements (if applicable): Must be able to lift up to 20lbs regularly Must be able to lift up to 50lbs infrequently Must be able to reach overhead Sitting or standing for periods of time Occasionally be able to work on weekends as needed to support projects
10/28/2026
Full time
Job Description Job Description Job Title: Systems Engineer Test Technician Location: Acton Massachusetts 01720 Job Description: Position Overview: The successful candidate will be responsible for supporting and managing materials, tools, and performing various engineering tasks across R&D, supporting existing products and new product initiatives. The general scope includes working with a highly motivated team of dedicated test technicians and experienced engineers in managing R&D materials and assets for ad-hoc or V&V testing purposes (manual and automated), setting up test environments, executing testing, reporting test results, building device prototypes, and maintaining laboratory equipment. The primary objective of this position will be ensuring smooth operation and preparation of mission-critical materials supply and testing to promote robust medical device design, development, and evaluations. Responsibilities: Coordinate with systems, development, and test engineers to understand schedules and equipment needsneed to support project testing activities. Create, build, and set up test fixtures and Building and setting up lab equipment for testing. Ensure proper equipment is ready on time for test execution across projects. Leverage existing tools and automation to execute automated tests and report results across projects and test cycles. Support basic troubleshooting and collecting logs and data for issues observed during testing. Execute manual and automated tests, record results, and document issues using standard tools and processes during project development cycles. Execute dry runs of new and updated manual and automated Test Cases. Support Test Method Validation (TMV), and Measurement System Analysis activities, including Gage R&R studies, documenting and analyzing data. Coordinate with Systems, development, and test engineers when troubleshooting issues and verifying fixes. Write reports and log issues for executed verification tests. Participate in the planning and execution of technical project work. Participate and Support 5S, Ensure lab safety and housekeeping practices. Performs technician tasks deploying standard and advanced techniques. Maintain laboratory equipment by scheduling regular maintenance, interfacing with facilities, service technicians, and responding to equipment issues. Performs other duties as required. Education and Experience: Minimum Requirements: High school diploma or GED 3 yrs experience working in a laboratory environment (preferably in R&D) or a combination of higher-level education 2 yrs experience using Microsoft Office suite (Word, Excel) & technical writing capabilities Preferred Skills and Competencies: Associate degree in an engineering or technical-related field Self-driven, efficient learner and able to perform in a dynamic work environment Equipment Maintenance Planning, organization & detailed oriented Knowledge of scripting and/or programming languages like Python is a plus. Knowledge of Android or iOS technology is a plus. Knowledge of SCM tools (Git, Bitbucket) and CI tools (Jenkins, Bamboo) is a plus. Experience with CAD software (SolidWorks preferred) is a plus. Experience with rapid prototyping tools including 3D printing is a plus. Knowledge of Measurement System Analysis (MSA), including Gage R&R studies. Previous experience working in the Medical Device industry (FDA/ISO regulated) is a plus. Good written and verbal communication skills Physical Requirements (if applicable): Must be able to lift up to 20lbs regularly Must be able to lift up to 50lbs infrequently Must be able to reach overhead Sitting or standing for periods of time Occasionally be able to work on weekends as needed to support projects
L3Harris Technologies
Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max)
L3Harris Technologies Wilmington, Massachusetts
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max) Job Code: 42614 Job Location: Wilmington, MA (on-site) Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: This role leads a Software Integrated Product Team (IPT) within the Space & Mission Systems Segment of L3Harris for our Wilmington MA location. The team develops, integrates, and tests flight software and Electrical Ground Support Equipment (EGSE) software for space-based EO/IR and optical payloads. The ideal candidate has a strong background in space domain, including embedded and real-time software, RTOS environments such as VxWorks, and development of EGSE and test systems for optical payload integration and test. This role requires technical leadership across the full software lifecycle, with responsibility for technical execution, cost, schedule, integration, and risk management. Essential Functions: Lead the Software IPT responsible for flight software and EGSE software development for space payload programs. Provide technical, cost, and schedule leadership across all phases of software development, integration, test, and delivery. Coordinate with Program Management, Systems Engineering, Electronics, FPGA, Integration & Test, and other cross-functional teams. Lead software planning, architecture, execution, and staffing for embedded, real-time, and test software efforts. Oversee development of software for payload command and telemetry, mode control, hardware interfaces, and EGSE/test automation. Ensure program deliverables are met through technical oversight, schedule management, cost tracking, and EVMS reporting where applicable. Lead risk management and RCCA activities for software and integration issues. Support software verification across SIL/HIL, bench, flatsat, and payload-level integration environments. Lead or participate in technical reviews, Independent Review Teams (IRT), and Agile/Scrum activities as needed. Ability to obtain a U.S. Top Secret Security Clearance Qualifications: Bachelor's degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace applications Professional experience in full System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Professional experience with Agile methods, supplier management, and cross-functional execution. Experience in an IPT or lead role overseeing team technical, cost, and schedule responsibilities Preferred Additional Skills: Active U.S. Security Clearance is preferred but not required. PMP or Agile/Scrum certifications are a plus. Experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), simulators (TSIM, VxSIM, SIMIC, MATLAB Simulink), and programming languages (C/C++, Python, scripting). Experience with embedded command and control of mechanisms (e.g., shutters, motors, gimbals), embedded controllers (e.g., PIC, STM, TMS), serial communications (e.g., CAN, TCP/IP, RS422), and distributed messaging (TCP/UDP). Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in estimating large software programs for new business opportunities. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
10/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max) Job Code: 42614 Job Location: Wilmington, MA (on-site) Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: This role leads a Software Integrated Product Team (IPT) within the Space & Mission Systems Segment of L3Harris for our Wilmington MA location. The team develops, integrates, and tests flight software and Electrical Ground Support Equipment (EGSE) software for space-based EO/IR and optical payloads. The ideal candidate has a strong background in space domain, including embedded and real-time software, RTOS environments such as VxWorks, and development of EGSE and test systems for optical payload integration and test. This role requires technical leadership across the full software lifecycle, with responsibility for technical execution, cost, schedule, integration, and risk management. Essential Functions: Lead the Software IPT responsible for flight software and EGSE software development for space payload programs. Provide technical, cost, and schedule leadership across all phases of software development, integration, test, and delivery. Coordinate with Program Management, Systems Engineering, Electronics, FPGA, Integration & Test, and other cross-functional teams. Lead software planning, architecture, execution, and staffing for embedded, real-time, and test software efforts. Oversee development of software for payload command and telemetry, mode control, hardware interfaces, and EGSE/test automation. Ensure program deliverables are met through technical oversight, schedule management, cost tracking, and EVMS reporting where applicable. Lead risk management and RCCA activities for software and integration issues. Support software verification across SIL/HIL, bench, flatsat, and payload-level integration environments. Lead or participate in technical reviews, Independent Review Teams (IRT), and Agile/Scrum activities as needed. Ability to obtain a U.S. Top Secret Security Clearance Qualifications: Bachelor's degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace applications Professional experience in full System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Professional experience with Agile methods, supplier management, and cross-functional execution. Experience in an IPT or lead role overseeing team technical, cost, and schedule responsibilities Preferred Additional Skills: Active U.S. Security Clearance is preferred but not required. PMP or Agile/Scrum certifications are a plus. Experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), simulators (TSIM, VxSIM, SIMIC, MATLAB Simulink), and programming languages (C/C++, Python, scripting). Experience with embedded command and control of mechanisms (e.g., shutters, motors, gimbals), embedded controllers (e.g., PIC, STM, TMS), serial communications (e.g., CAN, TCP/IP, RS422), and distributed messaging (TCP/UDP). Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in estimating large software programs for new business opportunities. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris Technologies
Lead, Electro-Optical (EO) Systems Engineer : Sign-on bonus ($30K max)
L3Harris Technologies Wilmington, Massachusetts
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Electro-Optical (EO) Systems Engineer : Sign-on bonus ($30K max) Job Code: 44404 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: During its 120-year history, L3Harris has transformed communications and information technology. L3Harris is a proven leader in tactical communications, geospatial systems and services, air traffic management, environmental solutions, avionics and electronic warfare, and space and intelligence. From ocean to orbit and everywhere in between, we provide mission-critical solutions to connect, inform and protect the world. On the L3Harris team, your job is to secure the world. We don't work here just for the advanced technology and equipment: we work here because we know what - and who - we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform - we're making the world a safer place! L3Harris Space Superiority group has an opening for a Lead, Systems Engineer to join our team of qualified, diverse individuals. This position will be in Wilmington, MA. The individual will work in a fast-paced environment significantly diverse assignments and a collaborative team setting. The L3Harris AgileEO Systems Engineering department is seeking a systems engineer to join our team and support one of our newer programs. AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts. Essential Functions: Coordinate with program leadership to develop a technical plan and path forward for program execution. System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements. Technical Leadership: Provide technical leadership and guidance in the areas of systems engineering, including architecture development, requirements analysis, and verification and validation (V&V). Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle. Modeling and Simulation: Conduct modeling and simulation activities to predict system performance and behavior under various operational scenarios. Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation. Documentation and Reporting: Generate and maintain detailed technical documentation, including system specifications, design descriptions, test plans, and test reports. Customer Requirements: Translate the voice of the customer into system level requirements and evaluate alternative solutions to establish preliminary system designs. Trade Studies: Develop and evaluate trade studies for accuracy and completeness to support decision-making processes. Identify and solve problems using logical engineering thought processes. Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S. Government customers, to ensure alignment and project success. Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices. Collaboration: Work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals. Training and Mentoring: Provide training and mentorship to junior engineers, fostering their development and growth within the team. Candidate will need to obtain a DOD Secret security clearance Qualifications: Bachelor's degree in Engineering, Physics, or other related scientific discipline and 9 years of relevant space-based EO/IR systems engineering work experience. A graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Experience as a Control Account Manager (CAM) and Integrated Product Team Lead (IPTL) is required 4+ years experience in electro-optics, including experience with optical design, sensors, detectors, and imaging systems 4+ years experience working with engineering and simulation software tools, such as MATLAB Preferred Additional Skills: Holds an active Secret or Top Secret/SCI clearance Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities Relevant professional certifications, such as INCOSE Systems Engineering Professional (SEP) certification, are a plus Proficient in Model Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA and SysML Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $127,500.00 - $236,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
10/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Electro-Optical (EO) Systems Engineer : Sign-on bonus ($30K max) Job Code: 44404 Job Location: Wilmington, MA Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: During its 120-year history, L3Harris has transformed communications and information technology. L3Harris is a proven leader in tactical communications, geospatial systems and services, air traffic management, environmental solutions, avionics and electronic warfare, and space and intelligence. From ocean to orbit and everywhere in between, we provide mission-critical solutions to connect, inform and protect the world. On the L3Harris team, your job is to secure the world. We don't work here just for the advanced technology and equipment: we work here because we know what - and who - we're protecting! From families to the intelligence community, and from our climate to our men and women in uniform - we're making the world a safer place! L3Harris Space Superiority group has an opening for a Lead, Systems Engineer to join our team of qualified, diverse individuals. This position will be in Wilmington, MA. The individual will work in a fast-paced environment significantly diverse assignments and a collaborative team setting. The L3Harris AgileEO Systems Engineering department is seeking a systems engineer to join our team and support one of our newer programs. AgileEO specializes in space-based, small aperture visible and IR telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will support the program technical leads (Lead or Chief Systems Engineer, IPT Lead) by performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include supporting the test and design verification, requirements sell off, end item data package (EIDP) generation efforts. Essential Functions: Coordinate with program leadership to develop a technical plan and path forward for program execution. System Design and Integration: Develop and integrate advanced electro-optical systems for space-based applications, ensuring compliance with all relevant specifications and mission requirements. Technical Leadership: Provide technical leadership and guidance in the areas of systems engineering, including architecture development, requirements analysis, and verification and validation (V&V). Requirements Management: Define, manage, and maintain system and sub-system level requirements, ensuring traceability and compliance throughout the project lifecycle. Modeling and Simulation: Conduct modeling and simulation activities to predict system performance and behavior under various operational scenarios. Project Execution: Lead and coordinate multidisciplinary engineering teams throughout the project lifecycle, from conceptual design to final system delivery and operation. Documentation and Reporting: Generate and maintain detailed technical documentation, including system specifications, design descriptions, test plans, and test reports. Customer Requirements: Translate the voice of the customer into system level requirements and evaluate alternative solutions to establish preliminary system designs. Trade Studies: Develop and evaluate trade studies for accuracy and completeness to support decision-making processes. Identify and solve problems using logical engineering thought processes. Stakeholder Communication: Communicate effectively with internal and external stakeholders, including subcontractors and U.S. Government customers, to ensure alignment and project success. Standards Compliance: Ensure all engineering activities adhere to industry standards, regulatory requirements, and best practices. Collaboration: Work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals. Training and Mentoring: Provide training and mentorship to junior engineers, fostering their development and growth within the team. Candidate will need to obtain a DOD Secret security clearance Qualifications: Bachelor's degree in Engineering, Physics, or other related scientific discipline and 9 years of relevant space-based EO/IR systems engineering work experience. A graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Experience as a Control Account Manager (CAM) and Integrated Product Team Lead (IPTL) is required 4+ years experience in electro-optics, including experience with optical design, sensors, detectors, and imaging systems 4+ years experience working with engineering and simulation software tools, such as MATLAB Preferred Additional Skills: Holds an active Secret or Top Secret/SCI clearance Demonstrated experience with space systems engineering, including knowledge of space environments, satellite systems, and space mission design Experience in leading technical teams, managing projects, and coordinating cross-functional engineering activities Relevant professional certifications, such as INCOSE Systems Engineering Professional (SEP) certification, are a plus Proficient in Model Based Systems Engineering (MBSE) tools such as DOORs, CAMEO, CREO, JIRA and SysML Excellent verbal and written communication skills, with the ability to clearly convey complex technical information to diverse audiences Strong analytical and problem-solving abilities, with a proven track record of tackling complex engineering challenges Ability to work effectively in a team environment and collaborate with multidisciplinary teams to achieve project goals In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $127,500.00 - $236,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris Technologies
Specialist, Electrical Engineering - FPGA/ ASIC Hardware Engineer
L3Harris Technologies Cincinnati, Ohio
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist,FPGA/ASIC Hardware Engineer, Electrical Engineering Job Code: 41606 Job Location: Cincinnati, Ohio Job Schedule: 4/10 Job Description: As a Hardware Engineer at L3Harris you will be responsible for architecture, design and development of next generation Electronic Safe and Arm Devices utilizing the latest state of the art technologies.The ideal candidate for this role would share our passion for creating and innovating newtechnologies in a highly dynamic, fast-paced environment. We are looking for highly talented, motivated, and versatile engineers that can create the next generation fuzing solutions. ASIC / FPGA designs will include various sensor interfaces, sequence verification, A/D and D/A interfaces, communication protocols, state machines, timer chains, etc. used in Electronic Safe and Arm Devices (Fuzes) for DOD weapon systems. Microsemi / Actel is our targeted FPGA and QuestaSim is our simulation tool. The primary responsibilities will focus on Verilog FPGA design, System Verilog UVM verification and C# based microcontroller development. Essential Functions: Analysis of the requirements, architecture definition, design and debug of FPGA and associated hardware and microcontroller products and associated firmware. Developing Verilog HDL targeting Antifuse and enhanced Flash FPGA's. Performing effective analysis of functional issues or performance profiling with the hardware and firmware in test environments or target host systems. Contribute to process improvements to ensure hardware-firmware quality and time-to-market. Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Knowledge using Verilog for Logic Design. Programming experience in C for embedded systems, including development of algorithms, manipulation of data structures, and implementing highly optimized code. Experience with lab tools: Logic Analyzers, oscilloscopes, JTAG/ICE debuggers and protocol analyzers Familiar with hardware, software and firmware development methodologies to ensure quality and time-to-market (design verification, code reviews, unit testing, prototyping and product testing). Familiar working with code version control repository tools, such as Subversion (SVN), GIT or TFS. Digital Design practices and principles, logic design and architecture and experience with HDL's (i.e Verilog, VHDL). Knowledge using SystemVerilog for verification with AVM, VMM, OVM, or UVM a plus Developing C# source code targeting Bare-Metal Microcontroller Development. Good English knowledge (speech and writing); Be action-oriented and organized; Ability to handle short notice needs/requests L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
10/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist,FPGA/ASIC Hardware Engineer, Electrical Engineering Job Code: 41606 Job Location: Cincinnati, Ohio Job Schedule: 4/10 Job Description: As a Hardware Engineer at L3Harris you will be responsible for architecture, design and development of next generation Electronic Safe and Arm Devices utilizing the latest state of the art technologies.The ideal candidate for this role would share our passion for creating and innovating newtechnologies in a highly dynamic, fast-paced environment. We are looking for highly talented, motivated, and versatile engineers that can create the next generation fuzing solutions. ASIC / FPGA designs will include various sensor interfaces, sequence verification, A/D and D/A interfaces, communication protocols, state machines, timer chains, etc. used in Electronic Safe and Arm Devices (Fuzes) for DOD weapon systems. Microsemi / Actel is our targeted FPGA and QuestaSim is our simulation tool. The primary responsibilities will focus on Verilog FPGA design, System Verilog UVM verification and C# based microcontroller development. Essential Functions: Analysis of the requirements, architecture definition, design and debug of FPGA and associated hardware and microcontroller products and associated firmware. Developing Verilog HDL targeting Antifuse and enhanced Flash FPGA's. Performing effective analysis of functional issues or performance profiling with the hardware and firmware in test environments or target host systems. Contribute to process improvements to ensure hardware-firmware quality and time-to-market. Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Knowledge using Verilog for Logic Design. Programming experience in C for embedded systems, including development of algorithms, manipulation of data structures, and implementing highly optimized code. Experience with lab tools: Logic Analyzers, oscilloscopes, JTAG/ICE debuggers and protocol analyzers Familiar with hardware, software and firmware development methodologies to ensure quality and time-to-market (design verification, code reviews, unit testing, prototyping and product testing). Familiar working with code version control repository tools, such as Subversion (SVN), GIT or TFS. Digital Design practices and principles, logic design and architecture and experience with HDL's (i.e Verilog, VHDL). Knowledge using SystemVerilog for verification with AVM, VMM, OVM, or UVM a plus Developing C# source code targeting Bare-Metal Microcontroller Development. Good English knowledge (speech and writing); Be action-oriented and organized; Ability to handle short notice needs/requests L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris Technologies
(DoW SkillBridge), Sr. Associate, Integration/Test Engineer
L3Harris Technologies Greenville, Texas
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: (DoW SkillBridge), Sr. Associate, Integration/Test Engineer Job Code: 43660 Job Location: Greenville, Texas Job Schedule: 1st Shift L3Harris' DoD SkillBridge is connecting transitioning service members to career training opportunities within our organization. We will provide service members with valuable civilian work experience through industry specific training, certifications and on the job experience during their DoD SkillBridge internship to help them ready themselves for their next mission. L3Harris aims to attract and retain veteran talent and to help bridge the gap between their military service and civilian careers within our organization. L3Harris is eager to share our knowledge and experience with our service members. This internship is an opportunity for the service member to gain a full understanding of the job position outlined below. TO BE ELIGIBLE FOR DOD SKILLBRIDGE JOB OPPORTUNITES YOU MUST BE AN ACTIVE MEMBER OF THE U.S. MILITARY WITH 180 DAYS OF SERVICE OR FEWER REMAINING PRIOR TO YOUR DATE OF SEPARATION AND HAVE AT LEAST 180 CONTINUOUS DAYS OF ACTIVE SERVICE. Job Description: Supports the integration, test, calibration, and operational readiness of complex ground and airborne electronic systems across multiple COMINT/SIGINT platforms. Essential Functions: Conduct subsystem pre-operational checks in accordance with approved engineering documentation and test procedures. Configure and prepare LRUs and subsystem components for single-thread and multi-thread interface testing and operation. Execute subsystem- and system-level Ground Test Plans in support of integration, verification, and validation activities. Troubleshoot system and subsystem discrepancies to the component level and support timely fault isolation and resolution. Identify LRU failures and perform or coordinate required repair, replacement, and retest activities. Detect and document hardware, software, and firmware anomalies, and recommend corrective actions through applicable enterprise systems and engineering processes. Support EMI/TEMPEST testing of airborne subsystems and associated integration activities. Support system integration efforts associated with hardware and software development. Perform aircraft pre-flight checks and related activities to ensure system and subsystem readiness for flight operations. Operate a wide range of electronic test equipment to support troubleshooting, verification, and performance testing, including: • LAN test devices • Network analyzers • TDRs • Digital multimeters • Oscilloscopes • Frequency counters • Function generators/AWGs • Signal generators • Spectrum analyzers • Power/watt meters • Fiber optic test equipment Utilize COTS and organic software applications to execute tests, analyze results, and document system performance. Support in-flight test activities and may serve as an onboard observer on airborne platforms, as required. Prepare, review, and maintain engineering documentation, test records, and related technical data. Provide technical input to design changes intended to improve mission effectiveness, equipment reliability, maintainability, and operational efficiency. Coordinate regularly with engineering, manufacturing, quality, field support, and customer organizations to resolve technical issues and support program execution. Qualifications: The successful candidate will possess 6-8 years of experience maintaining SIGINT/COMINT mission and communications systems on U.S. military airborne and/or ground-based platforms. Bachelor's degree in a related discipline is desired; however, in lieu of a bachelor's degree, a combination of military technical training, an associate degree, related experience, and/or applicable university coursework will be considered. Must be familiar with industry-standard electronic test equipment, COTS hardware, Linux-based applications, and other COTS software tools. Strong analytical, troubleshooting, verbal, and written communication skills are required. Must currently hold, or have the unrestricted ability to obtain, a U.S. DoD Secret security clearance and must be able to obtain and maintain a U.S. DoD Top Secret clearance with SCI eligibility. This position operates in a dynamic work environment where schedules may change and shifts may be extended on short notice; flexibility is essential. The position also requires the ability to support multiple shifts and varying work schedules, must require the ability to obtain and maintain FAA Class III flight physical qualification, and requires willingness to travel CONUS and OCONUS up to 10%. Experience supporting mission and communications systems on military airborne and/or ground-based platforms is highly desired. Preferred Additional Skills: • Strong applicable test environment experience. • Flexibility with work schedules in a dynamic work environment. • Previous experience on G550 or similar ISR platforms. • Experience with Cryptographic units and loading devices. • Strong work ethic and team-oriented mentality: Maintaining a sense of urgency to ensure obligations are met while achieving milestones in a team-based, technical environment. • Position requires the ability to obtain and maintain a DOD Security Clearance, which requires U.S. Citizenship. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
10/27/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: (DoW SkillBridge), Sr. Associate, Integration/Test Engineer Job Code: 43660 Job Location: Greenville, Texas Job Schedule: 1st Shift L3Harris' DoD SkillBridge is connecting transitioning service members to career training opportunities within our organization. We will provide service members with valuable civilian work experience through industry specific training, certifications and on the job experience during their DoD SkillBridge internship to help them ready themselves for their next mission. L3Harris aims to attract and retain veteran talent and to help bridge the gap between their military service and civilian careers within our organization. L3Harris is eager to share our knowledge and experience with our service members. This internship is an opportunity for the service member to gain a full understanding of the job position outlined below. TO BE ELIGIBLE FOR DOD SKILLBRIDGE JOB OPPORTUNITES YOU MUST BE AN ACTIVE MEMBER OF THE U.S. MILITARY WITH 180 DAYS OF SERVICE OR FEWER REMAINING PRIOR TO YOUR DATE OF SEPARATION AND HAVE AT LEAST 180 CONTINUOUS DAYS OF ACTIVE SERVICE. Job Description: Supports the integration, test, calibration, and operational readiness of complex ground and airborne electronic systems across multiple COMINT/SIGINT platforms. Essential Functions: Conduct subsystem pre-operational checks in accordance with approved engineering documentation and test procedures. Configure and prepare LRUs and subsystem components for single-thread and multi-thread interface testing and operation. Execute subsystem- and system-level Ground Test Plans in support of integration, verification, and validation activities. Troubleshoot system and subsystem discrepancies to the component level and support timely fault isolation and resolution. Identify LRU failures and perform or coordinate required repair, replacement, and retest activities. Detect and document hardware, software, and firmware anomalies, and recommend corrective actions through applicable enterprise systems and engineering processes. Support EMI/TEMPEST testing of airborne subsystems and associated integration activities. Support system integration efforts associated with hardware and software development. Perform aircraft pre-flight checks and related activities to ensure system and subsystem readiness for flight operations. Operate a wide range of electronic test equipment to support troubleshooting, verification, and performance testing, including: • LAN test devices • Network analyzers • TDRs • Digital multimeters • Oscilloscopes • Frequency counters • Function generators/AWGs • Signal generators • Spectrum analyzers • Power/watt meters • Fiber optic test equipment Utilize COTS and organic software applications to execute tests, analyze results, and document system performance. Support in-flight test activities and may serve as an onboard observer on airborne platforms, as required. Prepare, review, and maintain engineering documentation, test records, and related technical data. Provide technical input to design changes intended to improve mission effectiveness, equipment reliability, maintainability, and operational efficiency. Coordinate regularly with engineering, manufacturing, quality, field support, and customer organizations to resolve technical issues and support program execution. Qualifications: The successful candidate will possess 6-8 years of experience maintaining SIGINT/COMINT mission and communications systems on U.S. military airborne and/or ground-based platforms. Bachelor's degree in a related discipline is desired; however, in lieu of a bachelor's degree, a combination of military technical training, an associate degree, related experience, and/or applicable university coursework will be considered. Must be familiar with industry-standard electronic test equipment, COTS hardware, Linux-based applications, and other COTS software tools. Strong analytical, troubleshooting, verbal, and written communication skills are required. Must currently hold, or have the unrestricted ability to obtain, a U.S. DoD Secret security clearance and must be able to obtain and maintain a U.S. DoD Top Secret clearance with SCI eligibility. This position operates in a dynamic work environment where schedules may change and shifts may be extended on short notice; flexibility is essential. The position also requires the ability to support multiple shifts and varying work schedules, must require the ability to obtain and maintain FAA Class III flight physical qualification, and requires willingness to travel CONUS and OCONUS up to 10%. Experience supporting mission and communications systems on military airborne and/or ground-based platforms is highly desired. Preferred Additional Skills: • Strong applicable test environment experience. • Flexibility with work schedules in a dynamic work environment. • Previous experience on G550 or similar ISR platforms. • Experience with Cryptographic units and loading devices. • Strong work ethic and team-oriented mentality: Maintaining a sense of urgency to ensure obligations are met while achieving milestones in a team-based, technical environment. • Position requires the ability to obtain and maintain a DOD Security Clearance, which requires U.S. Citizenship. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
System Engineer 3 -verification and validation DFSS
Pyramid Consulting, Inc
Job Description Immediate need for a talented System Engineer 3 -verification and validation DFSS . This is a 12+ Months Contract opportunity with long-term potential and is located in San Diego, CA (Onsite) . Please review the job description below and contact me ASAP if you are interested. Job ID:26-29806 Pay Range: $70 - $75/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: The Senior Systems Engineer serves as a key technical leader throughout the product lifecycle, translating customer and stakeholder needs into system requirements, managing technical risk, coordinating system integration activities, and ensuring successful verification and validation. This individual partners closely with cross-functional teams to drive product development, resolve complex system-level challenges, and continuously improve engineering processes and product performance. Lead system-level engineering activities throughout the product lifecycle, from concept through launch and sustaining. Translate customer and stakeholder needs into clear, testable, and traceable system and product requirements. Lead requirements development, management, and traceability activities across complex hardware, software, and integrated systems. Plan, facilitate, and document system-level risk assessments, hazard analyses, and design reviews to ensure risks are identified and appropriately mitigated. Lead system integration planning and execution, identifying and resolving system-level issues throughout development and sustaining activities. Own verification and validation strategy, planning, coordination, execution oversight, and traceability to ensure product requirements are met. Develop and execute reliability planning activities and support data-driven product quality improvements. Facilitate cross-functional collaboration among Reliability, Statistics, Software, Electrical, Mechanical, Quality, Regulatory, Manufacturing, Clinical, Marketing, and Operations teams. Serve as a technical leader on project core teams, helping identify technical risks, resource needs, and critical path activities required to achieve project milestones. Investigate and resolve complex system behavior issues, product performance concerns, and technical challenges across development and commercialized products. Mentor and guide less experienced engineers in systems engineering processes, tools, and best practices. Identify, champion, and implement continuous improvement initiatives to enhance engineering effectiveness, product quality, and development efficiency. Apply Design for Six Sigma (DFSS) methodologies and engineering best practices across all projects. Key Requirements and Technology Experience: Top Must have Skills: Systems Engineering Experience - 3-5+ years leading system-level engineering for complex/integrated produc ts through development and launch. Requirements Engineering & Traceability - Hands-on experience developing, managing, and tracing system/product requirements. Verification & Validation (V&V) - Experience planning, coordinating, and overseeing system-level verification and validation activities. Risk Management - Strong experience with FMEA, hazard analysis, risk assessment, and risk mitigation. DFSS (Design for Six Sigma) Medical Device / Regulated Product Experience - Experience developing medical devices or other regulated products, preferably with design controls and cross-functional product development. Bachelor's degree in Engineering, Science, or a related technical discipline. A postgraduate degree is preferred. 3-5+ years of relevant engineering experience, or an equivalent combination of advanced education and engineering experience. Demonstrated experience leading systems engineering activities for complex products or integrated systems. Strong understanding of the product development lifecycle from concept through launch. Experience with requirements development, requirements management, and requirements traceability. Experience planning and executing system-level verification and validation activities. Experience leading risk management activities, including FMEA, hazard analysis, and risk mitigation planning. Familiarity with system integration, reliability engineering, design reviews, and technical problem-solving. Excellent technical writing, communication, and presentation skills. Ability to influence and collaborate effectively across multiple engineering disciplines and business functions. Strong analytical, organizational, and problem-solving skills. Ability to work independently while providing technical leadership within cross-functional teams. Strong attention to detail Experience developing medical devices or products within a regulated industry. Experience leading systems engineering efforts on software-enabled or connected products. Experience with requirements management tools and model-based systems engineering concepts. Experience with statistical methods, Design for Six Sigma (DFSS), reliability engineering, or design optimization techniques. Experience driving technical leadership within cross-functional product development teams. Experience working in Agile or hybrid product development environments. Leadership Expectations Successful Senior Systems Engineers are recognized as technical leaders who: Drive systems thinking across complex product development efforts. Influence technical direction through data-driven decision making. Proactively identify and mitigate technical risks. Build strong cross-functional partnerships. Mentor and develop other engineers. Champion engineering excellence and continuous improvement. Balance customer needs, business objectives, technical feasibility, and regulatory requirements to deliver successful products. Our client is a leading Medical Device Manufacturing Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
10/25/2026
Full time
Job Description Immediate need for a talented System Engineer 3 -verification and validation DFSS . This is a 12+ Months Contract opportunity with long-term potential and is located in San Diego, CA (Onsite) . Please review the job description below and contact me ASAP if you are interested. Job ID:26-29806 Pay Range: $70 - $75/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: The Senior Systems Engineer serves as a key technical leader throughout the product lifecycle, translating customer and stakeholder needs into system requirements, managing technical risk, coordinating system integration activities, and ensuring successful verification and validation. This individual partners closely with cross-functional teams to drive product development, resolve complex system-level challenges, and continuously improve engineering processes and product performance. Lead system-level engineering activities throughout the product lifecycle, from concept through launch and sustaining. Translate customer and stakeholder needs into clear, testable, and traceable system and product requirements. Lead requirements development, management, and traceability activities across complex hardware, software, and integrated systems. Plan, facilitate, and document system-level risk assessments, hazard analyses, and design reviews to ensure risks are identified and appropriately mitigated. Lead system integration planning and execution, identifying and resolving system-level issues throughout development and sustaining activities. Own verification and validation strategy, planning, coordination, execution oversight, and traceability to ensure product requirements are met. Develop and execute reliability planning activities and support data-driven product quality improvements. Facilitate cross-functional collaboration among Reliability, Statistics, Software, Electrical, Mechanical, Quality, Regulatory, Manufacturing, Clinical, Marketing, and Operations teams. Serve as a technical leader on project core teams, helping identify technical risks, resource needs, and critical path activities required to achieve project milestones. Investigate and resolve complex system behavior issues, product performance concerns, and technical challenges across development and commercialized products. Mentor and guide less experienced engineers in systems engineering processes, tools, and best practices. Identify, champion, and implement continuous improvement initiatives to enhance engineering effectiveness, product quality, and development efficiency. Apply Design for Six Sigma (DFSS) methodologies and engineering best practices across all projects. Key Requirements and Technology Experience: Top Must have Skills: Systems Engineering Experience - 3-5+ years leading system-level engineering for complex/integrated produc ts through development and launch. Requirements Engineering & Traceability - Hands-on experience developing, managing, and tracing system/product requirements. Verification & Validation (V&V) - Experience planning, coordinating, and overseeing system-level verification and validation activities. Risk Management - Strong experience with FMEA, hazard analysis, risk assessment, and risk mitigation. DFSS (Design for Six Sigma) Medical Device / Regulated Product Experience - Experience developing medical devices or other regulated products, preferably with design controls and cross-functional product development. Bachelor's degree in Engineering, Science, or a related technical discipline. A postgraduate degree is preferred. 3-5+ years of relevant engineering experience, or an equivalent combination of advanced education and engineering experience. Demonstrated experience leading systems engineering activities for complex products or integrated systems. Strong understanding of the product development lifecycle from concept through launch. Experience with requirements development, requirements management, and requirements traceability. Experience planning and executing system-level verification and validation activities. Experience leading risk management activities, including FMEA, hazard analysis, and risk mitigation planning. Familiarity with system integration, reliability engineering, design reviews, and technical problem-solving. Excellent technical writing, communication, and presentation skills. Ability to influence and collaborate effectively across multiple engineering disciplines and business functions. Strong analytical, organizational, and problem-solving skills. Ability to work independently while providing technical leadership within cross-functional teams. Strong attention to detail Experience developing medical devices or products within a regulated industry. Experience leading systems engineering efforts on software-enabled or connected products. Experience with requirements management tools and model-based systems engineering concepts. Experience with statistical methods, Design for Six Sigma (DFSS), reliability engineering, or design optimization techniques. Experience driving technical leadership within cross-functional product development teams. Experience working in Agile or hybrid product development environments. Leadership Expectations Successful Senior Systems Engineers are recognized as technical leaders who: Drive systems thinking across complex product development efforts. Influence technical direction through data-driven decision making. Proactively identify and mitigate technical risks. Build strong cross-functional partnerships. Mentor and develop other engineers. Champion engineering excellence and continuous improvement. Balance customer needs, business objectives, technical feasibility, and regulatory requirements to deliver successful products. Our client is a leading Medical Device Manufacturing Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.
Sr. Systems Engineer
Field Medical
Job Description Company Overview: Founded in 2022, Field Medical Inc. is a medical device company advancing next-generation pulsed field ablation (PFA) technologies for the treatment of cardiac arrhythmias. Field Medical's flagship innovation, the FieldForce Ablation System, is the first contact force focal PFA catheter system designed specifically for ventricular use. By delivering brief, high-intensity electric fields to target cardiac tissue without thermal damage, the system represents a novel approach to treating some of the most challenging arrhythmias. The company's proprietary FieldBending technology enables precise and large-volume lesion creation, supporting a broad range of electrophysiology applications. About the Role: We are seeking a highly skilled and detail-oriented Sr. Systems Engineer to lead systems engineering activities across our product development efforts. This person will be responsible for engineering and scientific DHF development, guiding internal R&D projects, and leading V&V efforts across the broader development team. While this role does not include direct people management, it does require strong cross-functional leadership to drive alignment across engineering, quality, regulatory, clinical, and other partner functions. The systems engineering function is responsible for helping prepare for international submissions and ensuring compliance with FDA requirements and applicable international standards. This role encompasses project planning, technical specification development, test and test tool development, workstream coordination, tracking progress across development and engineering teams, and development of DHF and DMR records. Your Responsibilities Will Include: Understand customer needs and write specifications for the system and sub-systems. Collaborate with SMEs to define and document system architecture and top-level design. Support technical designers in their design activities and verify fit of the design to system requirements. Conduct and review scientific analysis of the system (physical, hardware, software, algorithms, sensors, etc.) and related engineering activities to validate simulations and system design. Lead cross-functional alignment to define system specifications, requirements, architecture, performance, and usability objectives. Plan and conduct system integration, proof-of-design testing, and system and sub-system verification and validation activities. Build simulations and models of system functions, and lead feasibility studies. Perform measurements, create engineering designs, develop plans, and maintain laboratory notebooks for all work. Conduct testing (bench, V&V, in vivo), develop and utilize test protocols, and generate written reports. Recommend and enforce design compliance with electrical standards for medical devices. Conduct software evaluations, reviews, and system analyses. Act as a liaison between external vendors and internal cross-functional teams. Travel to customer sites, domestic and international, to gather VOC, perform testing, and support troubleshooting activities. Communicate business-related issues or opportunities to management as appropriate. Ensure personal and company compliance with all federal, state, local, and company regulations, policies, and procedures. Perform other duties as assigned. Required Qualifications: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or equivalent is required. 7+ years of engineering experience, including technology or product development responsibility in medical devices, along with at least 3 years of experience providing technical leadership on cross-functional teams. 3+ years of experience in systems engineering for multidisciplinary products involving software and hardware is required. Must know how to read schematics and use an oscilloscope and network analyzer to measure analog and digital signals Electrical circuit analysis experience- required Demonstrated ability to lead cross-functional alignment and drive execution without direct people management authority. Experience with development processes and technical documentation writing is required. Knowledge of and experience with software development and programming for tools and data analysis is required. Preferred Qualifications: Experience with design control, engineering change orders (ECO), Corrective Actions and Preventive Actions (CAPA) and software version control Experience in the medical device or the aero-space industries Knowledge of medical device electrical standards such as the IEC 60601 family of standards Location & Travel Requirements: In-Person in Carlsbad, CA Willingness to travel up to 25% The job requires to work with multiple time zones around the world and have a flexible work schedule. Field Medical, Inc. is proud to be an equal opportunity employer. We are committed to creating an inclusive and respectful workplace where everyone has the opportunity to thrive. All employment decisions, including recruitment, hiring, assignments, promotions, compensation, and other aspects of employment, are made without regard to race, color, religion, national origin, citizenship, sex, sexual orientation, gender identity, gender expression, age, disability, veteran status, or any other protected status. At Field Medical, we believe that diverse perspectives fuel innovation-and we're proud to foster a culture where all voices are valued.
10/25/2026
Full time
Job Description Company Overview: Founded in 2022, Field Medical Inc. is a medical device company advancing next-generation pulsed field ablation (PFA) technologies for the treatment of cardiac arrhythmias. Field Medical's flagship innovation, the FieldForce Ablation System, is the first contact force focal PFA catheter system designed specifically for ventricular use. By delivering brief, high-intensity electric fields to target cardiac tissue without thermal damage, the system represents a novel approach to treating some of the most challenging arrhythmias. The company's proprietary FieldBending technology enables precise and large-volume lesion creation, supporting a broad range of electrophysiology applications. About the Role: We are seeking a highly skilled and detail-oriented Sr. Systems Engineer to lead systems engineering activities across our product development efforts. This person will be responsible for engineering and scientific DHF development, guiding internal R&D projects, and leading V&V efforts across the broader development team. While this role does not include direct people management, it does require strong cross-functional leadership to drive alignment across engineering, quality, regulatory, clinical, and other partner functions. The systems engineering function is responsible for helping prepare for international submissions and ensuring compliance with FDA requirements and applicable international standards. This role encompasses project planning, technical specification development, test and test tool development, workstream coordination, tracking progress across development and engineering teams, and development of DHF and DMR records. Your Responsibilities Will Include: Understand customer needs and write specifications for the system and sub-systems. Collaborate with SMEs to define and document system architecture and top-level design. Support technical designers in their design activities and verify fit of the design to system requirements. Conduct and review scientific analysis of the system (physical, hardware, software, algorithms, sensors, etc.) and related engineering activities to validate simulations and system design. Lead cross-functional alignment to define system specifications, requirements, architecture, performance, and usability objectives. Plan and conduct system integration, proof-of-design testing, and system and sub-system verification and validation activities. Build simulations and models of system functions, and lead feasibility studies. Perform measurements, create engineering designs, develop plans, and maintain laboratory notebooks for all work. Conduct testing (bench, V&V, in vivo), develop and utilize test protocols, and generate written reports. Recommend and enforce design compliance with electrical standards for medical devices. Conduct software evaluations, reviews, and system analyses. Act as a liaison between external vendors and internal cross-functional teams. Travel to customer sites, domestic and international, to gather VOC, perform testing, and support troubleshooting activities. Communicate business-related issues or opportunities to management as appropriate. Ensure personal and company compliance with all federal, state, local, and company regulations, policies, and procedures. Perform other duties as assigned. Required Qualifications: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or equivalent is required. 7+ years of engineering experience, including technology or product development responsibility in medical devices, along with at least 3 years of experience providing technical leadership on cross-functional teams. 3+ years of experience in systems engineering for multidisciplinary products involving software and hardware is required. Must know how to read schematics and use an oscilloscope and network analyzer to measure analog and digital signals Electrical circuit analysis experience- required Demonstrated ability to lead cross-functional alignment and drive execution without direct people management authority. Experience with development processes and technical documentation writing is required. Knowledge of and experience with software development and programming for tools and data analysis is required. Preferred Qualifications: Experience with design control, engineering change orders (ECO), Corrective Actions and Preventive Actions (CAPA) and software version control Experience in the medical device or the aero-space industries Knowledge of medical device electrical standards such as the IEC 60601 family of standards Location & Travel Requirements: In-Person in Carlsbad, CA Willingness to travel up to 25% The job requires to work with multiple time zones around the world and have a flexible work schedule. Field Medical, Inc. is proud to be an equal opportunity employer. We are committed to creating an inclusive and respectful workplace where everyone has the opportunity to thrive. All employment decisions, including recruitment, hiring, assignments, promotions, compensation, and other aspects of employment, are made without regard to race, color, religion, national origin, citizenship, sex, sexual orientation, gender identity, gender expression, age, disability, veteran status, or any other protected status. At Field Medical, we believe that diverse perspectives fuel innovation-and we're proud to foster a culture where all voices are valued.
Hardware Engineer
SECO USA Rockville, Maryland
Job Description Job Description SECO USA is seeking an energetic, highly-motivated individual with excellent engineering skills for a challenging and rewarding position designing single board computers for embedded electronics applications. The successful candidate should have a strong working knowledge of analog and digital circuit design, embedded system architecture, schematic capture with PCB CAD tools, FPGA and CPLD logic design, and be eager to learn about new technologies in the world of embedded electronics. Specific Responsibilities: Design, verify, and document systems and components for rugged handheld electronics, from concept through production. Capture customer requirements and define hardware solutions, and test and verification plans to meet customer specifications. Use CAD tools for schematic capture. Perform timing and signal integrity simulation. Create net rules and routing constraints, and work with the placement and layout engineers to create PCB fabrication files. Design and simulate digital logic for programmable logic devices, (FPGA, CPLD) utilizing vendor Evaluate, select, and create models for electronic components to meet project requirements. Test and validate developed hardware, and participate in production testing, safety, EMC, and MIL-Spec certification. Interface with multidisciplinary teams (mechanical, software, systems, supply chain, sales) to manage electronic design and manufacturing tradeoffs. Minimum Requirements: Bachelor's degree in EE 8+ years in related electronic circuit design experience Experience with microprocessor based high-speed PCB design and CAD tools Familiarity with a variety of test bench equipment Strong and effective verbal, written and interpersonal communication skills Eligibility to work on ITAR projects (US person) Desired Qualifications: Familiarity with: Xpedition, Altium CAD tools Keysight ADS simulation tools FPGA development tools and Verilog or VHDL ARM and x86 microprocessor and microcontroller designs Design verification, testing and documentation US citizenship About SECO USA SECO USA is a leading designer of embedded systems and custom portable electronics for the military, medical, vending, gaming, and industrial markets. Our expertise in design, manufacturing and product testing helps our customers get to market faster and at lower cost with a custom solution that meets 100% of their requirements. Come join our growing engineering team, with a culture that revolves around employee development and empowerment, in Rockville, MD, just outside of Washington DC. You will work on a wide range of challenging projects alongside our staff of experienced professionals as we execute our mandate to rapidly grow our business. Visit our website to see more information about our products and capabilities. Competitive compensation package and benefits offered. Company Description SECO USA is a leading designer of embedded systems and custom electronics for the military, medical, and industrial markets. As an arm of the global SECO Group with headquarters in Arezzo, Italy, our team of electrical, software, mechanical, and system engineers in Rockville, MD (just outside of Washington, DC) serves a wide variety of clients throughout the US and Canada. Come join our growing engineering team, with a culture that revolves around employee development and empowerment. You will work on a wide range of challenging projects alongside our staff of experienced professionals. Visit our website to see more information about our products and capabilities. Competitive compensation package, benefits, and hybrid office/remote work location offered. Company Description SECO USA is a leading designer of embedded systems and custom electronics for the military, medical, and industrial markets. As an arm of the global SECO Group with headquarters in Arezzo, Italy, our team of electrical, software, mechanical, and system engineers in Rockville, MD (just outside of Washington, DC) serves a wide variety of clients throughout the US and Canada. Come join our growing engineering team, with a culture that revolves around employee development and empowerment. You will work on a wide range of challenging projects alongside our staff of experienced professionals. Visit our website to see more information about our products and capabilities. Competitive compensation package, benefits, and hybrid office/remote work location offered.
10/19/2026
Full time
Job Description Job Description SECO USA is seeking an energetic, highly-motivated individual with excellent engineering skills for a challenging and rewarding position designing single board computers for embedded electronics applications. The successful candidate should have a strong working knowledge of analog and digital circuit design, embedded system architecture, schematic capture with PCB CAD tools, FPGA and CPLD logic design, and be eager to learn about new technologies in the world of embedded electronics. Specific Responsibilities: Design, verify, and document systems and components for rugged handheld electronics, from concept through production. Capture customer requirements and define hardware solutions, and test and verification plans to meet customer specifications. Use CAD tools for schematic capture. Perform timing and signal integrity simulation. Create net rules and routing constraints, and work with the placement and layout engineers to create PCB fabrication files. Design and simulate digital logic for programmable logic devices, (FPGA, CPLD) utilizing vendor Evaluate, select, and create models for electronic components to meet project requirements. Test and validate developed hardware, and participate in production testing, safety, EMC, and MIL-Spec certification. Interface with multidisciplinary teams (mechanical, software, systems, supply chain, sales) to manage electronic design and manufacturing tradeoffs. Minimum Requirements: Bachelor's degree in EE 8+ years in related electronic circuit design experience Experience with microprocessor based high-speed PCB design and CAD tools Familiarity with a variety of test bench equipment Strong and effective verbal, written and interpersonal communication skills Eligibility to work on ITAR projects (US person) Desired Qualifications: Familiarity with: Xpedition, Altium CAD tools Keysight ADS simulation tools FPGA development tools and Verilog or VHDL ARM and x86 microprocessor and microcontroller designs Design verification, testing and documentation US citizenship About SECO USA SECO USA is a leading designer of embedded systems and custom portable electronics for the military, medical, vending, gaming, and industrial markets. Our expertise in design, manufacturing and product testing helps our customers get to market faster and at lower cost with a custom solution that meets 100% of their requirements. Come join our growing engineering team, with a culture that revolves around employee development and empowerment, in Rockville, MD, just outside of Washington DC. You will work on a wide range of challenging projects alongside our staff of experienced professionals as we execute our mandate to rapidly grow our business. Visit our website to see more information about our products and capabilities. Competitive compensation package and benefits offered. Company Description SECO USA is a leading designer of embedded systems and custom electronics for the military, medical, and industrial markets. As an arm of the global SECO Group with headquarters in Arezzo, Italy, our team of electrical, software, mechanical, and system engineers in Rockville, MD (just outside of Washington, DC) serves a wide variety of clients throughout the US and Canada. Come join our growing engineering team, with a culture that revolves around employee development and empowerment. You will work on a wide range of challenging projects alongside our staff of experienced professionals. Visit our website to see more information about our products and capabilities. Competitive compensation package, benefits, and hybrid office/remote work location offered. Company Description SECO USA is a leading designer of embedded systems and custom electronics for the military, medical, and industrial markets. As an arm of the global SECO Group with headquarters in Arezzo, Italy, our team of electrical, software, mechanical, and system engineers in Rockville, MD (just outside of Washington, DC) serves a wide variety of clients throughout the US and Canada. Come join our growing engineering team, with a culture that revolves around employee development and empowerment. You will work on a wide range of challenging projects alongside our staff of experienced professionals. Visit our website to see more information about our products and capabilities. Competitive compensation package, benefits, and hybrid office/remote work location offered.
Senior ATE Security Engineer, Amazon Leo Silicon Team
Amazon Kuiper Manufacturing Enterprises LLC Sunnyvale, California
Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! The Role As a Senior ATE Security Engineer, you will engage with an experienced cross-disciplinary staff to deliver secure, high-quality custom silicon powering the Leo network. This role has two focuses: device security and provisioning during test, and the development of reusable ATE library and automation software that accelerates test development across the team. You will own secure device provisioning and security algorithm test on Advantest 93K and/or Teradyne UltraFLEX platforms, including secure key and identity injection, OTP/eFuse programming, and fuse-based lifecycle management. You will also design and build reusable, well-architected library code and tooling, such as pattern search utilities, automated sub-flow generation, and auto-generation of test programs from patterns, that improve the productivity, consistency, and quality of the entire test engineering team. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment, and you will influence design, DFT, security, and manufacturing teams to ensure our products are architected for security, testability, and cost-effective high-volume manufacturing. Export Control Requirement Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Own device security and secure provisioning during test, including secure boot, secure key and identity injection, cryptographic provisioning, fuse-based configuration and lifecycle management, and debug-port lockdown. • Develop, own, and qualify OTP/eFuse programming flows, addressing challenges such as programming margin, read-back verification, repeatability, and the irreversible nature of fuse operations across process, voltage, and temperature. • Integrate ATE flows with secure provisioning systems, HSMs, or key-management infrastructure. • Develop and validate JTAG and debug-access flows on post-provisioned units to enable debug of RMA returns and downstream quality issues, while preserving device security posture. • Design, build, and maintain reusable ATE library code and tooling that accelerates test development across the team. • Develop utilities for pattern search and analysis, automated sub-flow generation, and auto-generation of test programs from patterns. • Architect libraries and frameworks for reusability, maintainability, and scale, applying strong software engineering practices (modular design, version control, code review, and testing). • Run firmware on DUTs to enable secure provisioning, self-test, and reduced test time. • Partner with ASIC design, DFT, security, and firmware teams to ensure devices meet Amazon standards for secure provisioning, design-for-test, and design-for-manufacturability. • Actively identify security, test-readiness, and software gaps throughout the product lifecycle and drive them to resolution. • Lead technical and security reviews and set software and security best practices for the team. BASIC QUALIFICATIONS- Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience - 7+ years of experience in silicon test, security engineering, or test software development. - Experience with device security and secure provisioning during test, including OTP/eFuse programming. - Working knowledge of the fundamentals of encryption, cryptographic keys, and secure communication channels. - Strong software engineering skills, including proficiency in a language such as Python and/or C/C++, and experience building reusable, well-architected code. - Experience developing test or automation software on Advantest 93K and/or Teradyne UltraFLEX platforms. - Strong written and verbal communication skills. - International travel required during release-to-production phases. PREFERRED QUALIFICATIONS- Master's degree in Electrical/Computer Engineering or Computer Science. - Demonstrated ability to lead cross-functional technical efforts and mentor other engineers. - Expertise in standard silicon security concerns for modem and SoC devices, such as secure boot, secure key and identity provisioning, fuse-based lifecycle management, and debug-port lockdown. - Experience implementing cryptographic provisioning flows involving keys, certificates, and device identities in a manufacturing or test environment. - Experience working with anti-tamper and physical security blocks in silicon, such as tamper detection, sensors, and secure-element hardening. - In-depth understanding of OTP/eFuse programming challenges, including margin, read-back verification, repeatability, and managing irreversible operations at high volume. - Strong software development background, with experience building reusable ATE libraries and tooling (pattern search, sub-flow generation, automated test-program generation). - Experience with digital test of complex SoCs, including developing, debugging, and analyzing coverage for scan/ATPG, MBIST, boundary scan (JTAG), and functional tests. - Experience developing and debugging test programs on ATE platforms such as Advantest 93K and Teradyne UltraFLEX. - Experience with high-speed SERDES test and characterization, including equalization test and tuning (CTLE/DFE/FFE), jitter decomposition, and eye/BER analysis. - Experience developing high-volume manufacturing test solutions and driving the full test release process across the New Product Introduction (NPI) lifecycle, from silicon bring-up, characterization, and qualification through production hand-off and ramp. - Familiarity with I/O protocols such as I3C, SPI, and GPIO. - Experience testing complex modem and SoC devices in advanced process nodes. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, CA, San Diego - 185 000.00 USD annually USA, CA, Sunnyvale - 213 500.00 USD annually USA, WA, Redmond - 185 000.00 USD annually
10/16/2026
Full time
Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! The Role As a Senior ATE Security Engineer, you will engage with an experienced cross-disciplinary staff to deliver secure, high-quality custom silicon powering the Leo network. This role has two focuses: device security and provisioning during test, and the development of reusable ATE library and automation software that accelerates test development across the team. You will own secure device provisioning and security algorithm test on Advantest 93K and/or Teradyne UltraFLEX platforms, including secure key and identity injection, OTP/eFuse programming, and fuse-based lifecycle management. You will also design and build reusable, well-architected library code and tooling, such as pattern search utilities, automated sub-flow generation, and auto-generation of test programs from patterns, that improve the productivity, consistency, and quality of the entire test engineering team. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment, and you will influence design, DFT, security, and manufacturing teams to ensure our products are architected for security, testability, and cost-effective high-volume manufacturing. Export Control Requirement Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Own device security and secure provisioning during test, including secure boot, secure key and identity injection, cryptographic provisioning, fuse-based configuration and lifecycle management, and debug-port lockdown. • Develop, own, and qualify OTP/eFuse programming flows, addressing challenges such as programming margin, read-back verification, repeatability, and the irreversible nature of fuse operations across process, voltage, and temperature. • Integrate ATE flows with secure provisioning systems, HSMs, or key-management infrastructure. • Develop and validate JTAG and debug-access flows on post-provisioned units to enable debug of RMA returns and downstream quality issues, while preserving device security posture. • Design, build, and maintain reusable ATE library code and tooling that accelerates test development across the team. • Develop utilities for pattern search and analysis, automated sub-flow generation, and auto-generation of test programs from patterns. • Architect libraries and frameworks for reusability, maintainability, and scale, applying strong software engineering practices (modular design, version control, code review, and testing). • Run firmware on DUTs to enable secure provisioning, self-test, and reduced test time. • Partner with ASIC design, DFT, security, and firmware teams to ensure devices meet Amazon standards for secure provisioning, design-for-test, and design-for-manufacturability. • Actively identify security, test-readiness, and software gaps throughout the product lifecycle and drive them to resolution. • Lead technical and security reviews and set software and security best practices for the team. BASIC QUALIFICATIONS- Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience - 7+ years of experience in silicon test, security engineering, or test software development. - Experience with device security and secure provisioning during test, including OTP/eFuse programming. - Working knowledge of the fundamentals of encryption, cryptographic keys, and secure communication channels. - Strong software engineering skills, including proficiency in a language such as Python and/or C/C++, and experience building reusable, well-architected code. - Experience developing test or automation software on Advantest 93K and/or Teradyne UltraFLEX platforms. - Strong written and verbal communication skills. - International travel required during release-to-production phases. PREFERRED QUALIFICATIONS- Master's degree in Electrical/Computer Engineering or Computer Science. - Demonstrated ability to lead cross-functional technical efforts and mentor other engineers. - Expertise in standard silicon security concerns for modem and SoC devices, such as secure boot, secure key and identity provisioning, fuse-based lifecycle management, and debug-port lockdown. - Experience implementing cryptographic provisioning flows involving keys, certificates, and device identities in a manufacturing or test environment. - Experience working with anti-tamper and physical security blocks in silicon, such as tamper detection, sensors, and secure-element hardening. - In-depth understanding of OTP/eFuse programming challenges, including margin, read-back verification, repeatability, and managing irreversible operations at high volume. - Strong software development background, with experience building reusable ATE libraries and tooling (pattern search, sub-flow generation, automated test-program generation). - Experience with digital test of complex SoCs, including developing, debugging, and analyzing coverage for scan/ATPG, MBIST, boundary scan (JTAG), and functional tests. - Experience developing and debugging test programs on ATE platforms such as Advantest 93K and Teradyne UltraFLEX. - Experience with high-speed SERDES test and characterization, including equalization test and tuning (CTLE/DFE/FFE), jitter decomposition, and eye/BER analysis. - Experience developing high-volume manufacturing test solutions and driving the full test release process across the New Product Introduction (NPI) lifecycle, from silicon bring-up, characterization, and qualification through production hand-off and ramp. - Familiarity with I/O protocols such as I3C, SPI, and GPIO. - Experience testing complex modem and SoC devices in advanced process nodes. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, CA, San Diego - 185 000.00 USD annually USA, CA, Sunnyvale - 213 500.00 USD annually USA, WA, Redmond - 185 000.00 USD annually
Senior ATE Security Engineer, Amazon Leo Silicon Team
Amazon Kuiper Manufacturing Enterprises LLC Sunnyvale, California
Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! The Role As a Senior ATE Security Engineer, you will engage with an experienced cross-disciplinary staff to deliver secure, high-quality custom silicon powering the Leo network. This role has two focuses: device security and provisioning during test, and the development of reusable ATE library and automation software that accelerates test development across the team. You will own secure device provisioning and security algorithm test on Advantest 93K and/or Teradyne UltraFLEX platforms, including secure key and identity injection, OTP/eFuse programming, and fuse-based lifecycle management. You will also design and build reusable, well-architected library code and tooling, such as pattern search utilities, automated sub-flow generation, and auto-generation of test programs from patterns, that improve the productivity, consistency, and quality of the entire test engineering team. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment, and you will influence design, DFT, security, and manufacturing teams to ensure our products are architected for security, testability, and cost-effective high-volume manufacturing. Export Control Requirement Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Own device security and secure provisioning during test, including secure boot, secure key and identity injection, cryptographic provisioning, fuse-based configuration and lifecycle management, and debug-port lockdown. • Develop, own, and qualify OTP/eFuse programming flows, addressing challenges such as programming margin, read-back verification, repeatability, and the irreversible nature of fuse operations across process, voltage, and temperature. • Integrate ATE flows with secure provisioning systems, HSMs, or key-management infrastructure. • Develop and validate JTAG and debug-access flows on post-provisioned units to enable debug of RMA returns and downstream quality issues, while preserving device security posture. • Design, build, and maintain reusable ATE library code and tooling that accelerates test development across the team. • Develop utilities for pattern search and analysis, automated sub-flow generation, and auto-generation of test programs from patterns. • Architect libraries and frameworks for reusability, maintainability, and scale, applying strong software engineering practices (modular design, version control, code review, and testing). • Run firmware on DUTs to enable secure provisioning, self-test, and reduced test time. • Partner with ASIC design, DFT, security, and firmware teams to ensure devices meet Amazon standards for secure provisioning, design-for-test, and design-for-manufacturability. • Actively identify security, test-readiness, and software gaps throughout the product lifecycle and drive them to resolution. • Lead technical and security reviews and set software and security best practices for the team. BASIC QUALIFICATIONS - Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience - 7+ years of experience in silicon test, security engineering, or test software development. - Experience with device security and secure provisioning during test, including OTP/eFuse programming. - Working knowledge of the fundamentals of encryption, cryptographic keys, and secure communication channels. - Strong software engineering skills, including proficiency in a language such as Python and/or C/C++, and experience building reusable, well-architected code. - Experience developing test or automation software on Advantest 93K and/or Teradyne UltraFLEX platforms. - Strong written and verbal communication skills. - International travel required during release-to-production phases. PREFERRED QUALIFICATIONS - Master's degree in Electrical/Computer Engineering or Computer Science. - Demonstrated ability to lead cross-functional technical efforts and mentor other engineers. - Expertise in standard silicon security concerns for modem and SoC devices, such as secure boot, secure key and identity provisioning, fuse-based lifecycle management, and debug-port lockdown. - Experience implementing cryptographic provisioning flows involving keys, certificates, and device identities in a manufacturing or test environment. - Experience working with anti-tamper and physical security blocks in silicon, such as tamper detection, sensors, and secure-element hardening. - In-depth understanding of OTP/eFuse programming challenges, including margin, read-back verification, repeatability, and managing irreversible operations at high volume. - Strong software development background, with experience building reusable ATE libraries and tooling (pattern search, sub-flow generation, automated test-program generation). - Experience with digital test of complex SoCs, including developing, debugging, and analyzing coverage for scan/ATPG, MBIST, boundary scan (JTAG), and functional tests. - Experience developing and debugging test programs on ATE platforms such as Advantest 93K and Teradyne UltraFLEX. - Experience with high-speed SERDES test and characterization, including equalization test and tuning (CTLE/DFE/FFE), jitter decomposition, and eye/BER analysis. - Experience developing high-volume manufacturing test solutions and driving the full test release process across the New Product Introduction (NPI) lifecycle, from silicon bring-up, characterization, and qualification through production hand-off and ramp. - Familiarity with I/O protocols such as I3C, SPI, and GPIO. - Experience testing complex modem and SoC devices in advanced process nodes. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, CA, San Diego - 185 000.00 USD annually USA, CA, Sunnyvale - 213 500.00 USD annually USA, WA, Redmond - 185 000.00 USD annually
10/08/2026
Full time
Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! The Role As a Senior ATE Security Engineer, you will engage with an experienced cross-disciplinary staff to deliver secure, high-quality custom silicon powering the Leo network. This role has two focuses: device security and provisioning during test, and the development of reusable ATE library and automation software that accelerates test development across the team. You will own secure device provisioning and security algorithm test on Advantest 93K and/or Teradyne UltraFLEX platforms, including secure key and identity injection, OTP/eFuse programming, and fuse-based lifecycle management. You will also design and build reusable, well-architected library code and tooling, such as pattern search utilities, automated sub-flow generation, and auto-generation of test programs from patterns, that improve the productivity, consistency, and quality of the entire test engineering team. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment, and you will influence design, DFT, security, and manufacturing teams to ensure our products are architected for security, testability, and cost-effective high-volume manufacturing. Export Control Requirement Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Own device security and secure provisioning during test, including secure boot, secure key and identity injection, cryptographic provisioning, fuse-based configuration and lifecycle management, and debug-port lockdown. • Develop, own, and qualify OTP/eFuse programming flows, addressing challenges such as programming margin, read-back verification, repeatability, and the irreversible nature of fuse operations across process, voltage, and temperature. • Integrate ATE flows with secure provisioning systems, HSMs, or key-management infrastructure. • Develop and validate JTAG and debug-access flows on post-provisioned units to enable debug of RMA returns and downstream quality issues, while preserving device security posture. • Design, build, and maintain reusable ATE library code and tooling that accelerates test development across the team. • Develop utilities for pattern search and analysis, automated sub-flow generation, and auto-generation of test programs from patterns. • Architect libraries and frameworks for reusability, maintainability, and scale, applying strong software engineering practices (modular design, version control, code review, and testing). • Run firmware on DUTs to enable secure provisioning, self-test, and reduced test time. • Partner with ASIC design, DFT, security, and firmware teams to ensure devices meet Amazon standards for secure provisioning, design-for-test, and design-for-manufacturability. • Actively identify security, test-readiness, and software gaps throughout the product lifecycle and drive them to resolution. • Lead technical and security reviews and set software and security best practices for the team. BASIC QUALIFICATIONS - Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, or equivalent work experience - 7+ years of experience in silicon test, security engineering, or test software development. - Experience with device security and secure provisioning during test, including OTP/eFuse programming. - Working knowledge of the fundamentals of encryption, cryptographic keys, and secure communication channels. - Strong software engineering skills, including proficiency in a language such as Python and/or C/C++, and experience building reusable, well-architected code. - Experience developing test or automation software on Advantest 93K and/or Teradyne UltraFLEX platforms. - Strong written and verbal communication skills. - International travel required during release-to-production phases. PREFERRED QUALIFICATIONS - Master's degree in Electrical/Computer Engineering or Computer Science. - Demonstrated ability to lead cross-functional technical efforts and mentor other engineers. - Expertise in standard silicon security concerns for modem and SoC devices, such as secure boot, secure key and identity provisioning, fuse-based lifecycle management, and debug-port lockdown. - Experience implementing cryptographic provisioning flows involving keys, certificates, and device identities in a manufacturing or test environment. - Experience working with anti-tamper and physical security blocks in silicon, such as tamper detection, sensors, and secure-element hardening. - In-depth understanding of OTP/eFuse programming challenges, including margin, read-back verification, repeatability, and managing irreversible operations at high volume. - Strong software development background, with experience building reusable ATE libraries and tooling (pattern search, sub-flow generation, automated test-program generation). - Experience with digital test of complex SoCs, including developing, debugging, and analyzing coverage for scan/ATPG, MBIST, boundary scan (JTAG), and functional tests. - Experience developing and debugging test programs on ATE platforms such as Advantest 93K and Teradyne UltraFLEX. - Experience with high-speed SERDES test and characterization, including equalization test and tuning (CTLE/DFE/FFE), jitter decomposition, and eye/BER analysis. - Experience developing high-volume manufacturing test solutions and driving the full test release process across the New Product Introduction (NPI) lifecycle, from silicon bring-up, characterization, and qualification through production hand-off and ramp. - Familiarity with I/O protocols such as I3C, SPI, and GPIO. - Experience testing complex modem and SoC devices in advanced process nodes. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at . USA, CA, San Diego - 185 000.00 USD annually USA, CA, Sunnyvale - 213 500.00 USD annually USA, WA, Redmond - 185 000.00 USD annually
Commercial Installer, Telecom
TAK Broadband Bangor, Wisconsin
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
10/02/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
Telecommunication Installer
TAK Broadband Bangor, Wisconsin
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
10/02/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Commercial Installer to join our team in La Crosse, WI (1108 Venture Place, Onalaska, WI 54650). In this role you will be responsible for bringing fiber and low-voltage services from the point of entry into commercial buildings and delivering them to the customer's internal network locations. This includes installing, routing, terminating, testing, and troubleshooting fiber and Ethernet cabling inside businesses and new construction sites such as offices, hospitals, schools, hotels, and apartment complexes. Why TAK? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Install fiber and low-voltage services from the building point of entry to customer network locations (IT rooms, telecom closets, wall plates, patch panels, and equipment racks) Route, pull, secure, and label fiber and Ethernet (Cat5/Cat6) cabling throughout commercial buildings and new construction sites Terminate and splice fiber using mechanical and fusion splicing methods; terminate Ethernet connections at wall jacks, patch panels, and network equipment Test and verify fiber and Ethernet installations using appropriate testing equipment (light testing, OTDR, and continuity testing) to ensure service quality and reliability Troubleshoot and resolve installation or service issues in both new construction and existing commercial buildings Perform work primarily indoors (approximately 85%) in environments such as offices, hospitals, hotels, schools, warehouses, and multi-unit buildings, with some outdoor work as needed Work in a variety of spaces including ceilings, attics, crawl spaces, tight areas, and elevated locations using ladders, lifts, and hand tools Collaborate with other installers and supervisors on job sites, while also completing assigned tasks independently when appropriate Communicate professionally with customers, site contacts, and internal team members to coordinate work and provide a positive customer experience Organize materials, tools, and daily tasks efficiently to meet project timelines and job expectations Maintain a strong focus on safety, quality workmanship, and job site cleanliness at all times Requirements: Experience in cable/fiber installation experience preferred Excellent customer service, time management, problem-solving and troubleshooting skills Ability to learn and operate testing equipment and software/programs Ability to utilize hand tools, identify wire size/color and accurately utilize measuring devices Ability to carry, climb, operate, and work upon an extension ladder (approximately 28 feet high and 75 pounds) Ability to complete work indoors, outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time Ability to safely navigate various terrains, managing equipment and tools A body weight of no more than 275 pounds to perform ladder work safely. Safety is our Priority. If personal safety is not compromised, an accommodation may be available based on previous ladder experience in a similar role Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
Systems Specialist II
Albireo Energy Sterling, Virginia
Job Description Job Description Under minimal supervision, conducts preventive maintenance, repair, installation, commissioning and general servicing of systems. Performs point to point check out to verify that controls systems have been installed properly. Completes assigned system commissioning and performs device verification. Troubleshoots and resolves HVAC mechanical, electrical, and controls problems. Properly completes required project documentation. Responsible for high levels of customer satisfaction through direct, on site, customer interface. Properly completes required project and service documentation. A key member of the Albireo team, the System Specialist will be responsible for providing the execution for HVAC Building Automation projects, to include: Performs start up, checking, testing, system diagnostics and commissioning from system-level controllers to end devices for small to medium sized new or retrofit projects. Performs preventative and predictive maintenance service activities to ensure optimal performance of system. Ability to troubleshoot, diagnose and repair and/or replace control components and controls systems. Also, the ability to troubleshoot mechanical, HVAC and electrical issues related to the BAS Control system operation. Understanding complex control systems including diagnosing and troubleshooting networking and integration. Ability to write, create, load, test and commission programming software and graphics utilizing various programming languages and software. Performs and executes assigned work efficiently and professionally. Communicates with customer upon arrival and before leaving the work site. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Trains the customer in control systems operations including obtaining customer training form, providing training certificates. Completes, compiles and submits job documentation such as commissioning documentation, punch lists, etc. Marks up controls submittals to capture field changes and discrepancies for engineering to create As-Builts. Interfaces with service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Reports problems or changes to management immediately. Assists sales by providing technical recommendations for sales leads and proposals for retrofits, upgrades and or enhancements to existing equipment. May assist with job layout. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Ability to load and update software on network controllers, field controllers, computers and servers. Completes and submits timely electronic documentation including but not limited to time sheets, expense reports, and on-site documentation. Requirements Requires extensive knowledge of a variety of electronic or digital controls systems. Vocational School four-year program graduate or an Associate's degree in electronics, mechanical systems, computer technology, air conditioning or similar field. Degree may be offset by two years of experience in servicing electronic and or mechanical systems. Three to five years of increasingly responsible experience in servicing electronic controls and HVAC equipment. Ability to coordinate the work of others on multiple job sites. Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner. Must have experience in writing as well as demonstrated understanding of computer programs and software applications as related to the HVAC Industry. Valid Driver's license with a clean record. Pay Rate: $40-$50/hr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
09/30/2026
Full time
Job Description Job Description Under minimal supervision, conducts preventive maintenance, repair, installation, commissioning and general servicing of systems. Performs point to point check out to verify that controls systems have been installed properly. Completes assigned system commissioning and performs device verification. Troubleshoots and resolves HVAC mechanical, electrical, and controls problems. Properly completes required project documentation. Responsible for high levels of customer satisfaction through direct, on site, customer interface. Properly completes required project and service documentation. A key member of the Albireo team, the System Specialist will be responsible for providing the execution for HVAC Building Automation projects, to include: Performs start up, checking, testing, system diagnostics and commissioning from system-level controllers to end devices for small to medium sized new or retrofit projects. Performs preventative and predictive maintenance service activities to ensure optimal performance of system. Ability to troubleshoot, diagnose and repair and/or replace control components and controls systems. Also, the ability to troubleshoot mechanical, HVAC and electrical issues related to the BAS Control system operation. Understanding complex control systems including diagnosing and troubleshooting networking and integration. Ability to write, create, load, test and commission programming software and graphics utilizing various programming languages and software. Performs and executes assigned work efficiently and professionally. Communicates with customer upon arrival and before leaving the work site. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Trains the customer in control systems operations including obtaining customer training form, providing training certificates. Completes, compiles and submits job documentation such as commissioning documentation, punch lists, etc. Marks up controls submittals to capture field changes and discrepancies for engineering to create As-Builts. Interfaces with service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Reports problems or changes to management immediately. Assists sales by providing technical recommendations for sales leads and proposals for retrofits, upgrades and or enhancements to existing equipment. May assist with job layout. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Ability to load and update software on network controllers, field controllers, computers and servers. Completes and submits timely electronic documentation including but not limited to time sheets, expense reports, and on-site documentation. Requirements Requires extensive knowledge of a variety of electronic or digital controls systems. Vocational School four-year program graduate or an Associate's degree in electronics, mechanical systems, computer technology, air conditioning or similar field. Degree may be offset by two years of experience in servicing electronic and or mechanical systems. Three to five years of increasingly responsible experience in servicing electronic controls and HVAC equipment. Ability to coordinate the work of others on multiple job sites. Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner. Must have experience in writing as well as demonstrated understanding of computer programs and software applications as related to the HVAC Industry. Valid Driver's license with a clean record. Pay Rate: $40-$50/hr. DOE. Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match Pre-Employment Requirements: All offers of employment are contingent upon successful completion of applicable pre-employment screenings, which may include a background check and drug screening, conducted in accordance with applicable federal, state, and local laws. Positions where driving is an essential function will also require a satisfactory Motor Vehicle Record (MVR). Work Authorization: Candidates must be authorized to work in the United States. Agency Submissions: Albireo Energy does not accept unsolicited candidate submissions from third-party recruiting agencies. Candidate ownership will only be recognized when submitted under an active, authorized agreement and through our official Applicant Tracking System. Submissions received without a prior agreement will be considered the property of Albireo Energy. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Palo Alto Firewall Engineer / SME (PCNSE)
RISA Springfield, Virginia
Job Description Job Description Palo Alto Firewall Engineer / SME (PCNSE) Cyber Security Engineering Specialist III - Firewall Services Location: Springfield, VA - on site Time Type: Full time, Exempt Clearance Required to Start: Active TS/SCI (U.S. citizenship required) Additional Requirement: Must be able to obtain and maintain a U.S. Government polygraph Travel: Up to 15%, local and CONUS Salary Range: $117,000 - $128,000 Own the Palo Alto estate - legacy iron through Prisma and Panorama. RISA is hiring a Palo Alto SME to be the focal point for every Palo Alto task, operation, and project on the Network Security Services team supporting an Intelligence Community customer. The work spans both ends of the estate: PA-3000 and PA-5000 hardware refreshes and legacy CLI on one side, Prisma Access, VM-Series, and Cortex on the other. You will talk to the owner here, not a recruiting queue. What You Will Do Serve as the lead technical authority for administering, configuring, and troubleshooting Palo Alto NGFWs across a hybrid enterprise. Lead the design, analysis, testing, and implementation of secure network architectures on the Palo Alto stack. Manage the full hardware and software lifecycle, including complex refreshes and PAN-OS upgrades on legacy platforms. Run Panorama for centralized policy management across a fleet of physical and virtual firewalls. Configure master-level security profiles - App-ID, User-ID, Content-ID, SSL Decryption, and WildFire. Own configuration management processes and SOPs for all Palo Alto platforms. Mentor junior engineers and act as the escalation point for complex troubleshooting. Liaise with contract, customer, and government DAA on network security status, policies, and procedures. What You'll Bring S. citizenship and an active TS/SCI. Ability to successfully obtain and maintain a U.S. Government polygraph. Education and experience, per the contract labor category criteria: Bachelor's degree in a field applicable to the position plus 6 years of relevant experience. Equivalents accepted - Master's plus 4, Associate's plus 8, or High School diploma/GED plus 10. 7+ years hands-on administering, configuring, and troubleshooting Palo Alto NGFWs in large-scale enterprise or global environments. Active PCNSE certification. DoD 8140.01 and 8570.01-M IAT Level II (e.g. Security+ CE), and CSSP Infrastructure Support within 120 days of start. Deep practical knowledge of legacy Gen 2/Gen 3 hardware - PA-3000 and PA-5000 series, legacy CLI, physical troubleshooting, line-card replacement. Prisma Access (SASE), Prisma SD-WAN, and VM-Series in AWS, Azure, or GCP. Panorama template and device-group inheritance across a hybrid fleet. Advanced BGP, OSPF, IPSec VPN, and NAT. Nice to Have PCNSC or Prisma Certified SASE Professional (PCSAE). Python, plus firewall automation with Ansible, Terraform, or the Palo Alto XML/REST APIs. Cortex XDR or XSOAR; Expedition for legacy rule migration to App-ID policy. Zero Trust Network Access architecture; F5 (APM, AFM), Juniper SRX, or Cisco FTD/ASA. About RISA Rolston Information Systems Assurance (RISA) is a Service-Disabled Veteran-Owned Small Business that has supported federal defense and intelligence cybersecurity missions for more than seventeen years. We are small on purpose: direct access to leadership, a real say in how the work gets done, and none of the layers that slow large primes down. Benefits Medical, dental, and vision insurance; 401(k) and Roth; Paid Time Off; and 11 paid Federal Holidays. RISA is an Equal Opportunity Employer. Upon receiving an offer of employment, all applicants will be required to do a background check, including a criminal record check and employment/education verification.
09/30/2026
Full time
Job Description Job Description Palo Alto Firewall Engineer / SME (PCNSE) Cyber Security Engineering Specialist III - Firewall Services Location: Springfield, VA - on site Time Type: Full time, Exempt Clearance Required to Start: Active TS/SCI (U.S. citizenship required) Additional Requirement: Must be able to obtain and maintain a U.S. Government polygraph Travel: Up to 15%, local and CONUS Salary Range: $117,000 - $128,000 Own the Palo Alto estate - legacy iron through Prisma and Panorama. RISA is hiring a Palo Alto SME to be the focal point for every Palo Alto task, operation, and project on the Network Security Services team supporting an Intelligence Community customer. The work spans both ends of the estate: PA-3000 and PA-5000 hardware refreshes and legacy CLI on one side, Prisma Access, VM-Series, and Cortex on the other. You will talk to the owner here, not a recruiting queue. What You Will Do Serve as the lead technical authority for administering, configuring, and troubleshooting Palo Alto NGFWs across a hybrid enterprise. Lead the design, analysis, testing, and implementation of secure network architectures on the Palo Alto stack. Manage the full hardware and software lifecycle, including complex refreshes and PAN-OS upgrades on legacy platforms. Run Panorama for centralized policy management across a fleet of physical and virtual firewalls. Configure master-level security profiles - App-ID, User-ID, Content-ID, SSL Decryption, and WildFire. Own configuration management processes and SOPs for all Palo Alto platforms. Mentor junior engineers and act as the escalation point for complex troubleshooting. Liaise with contract, customer, and government DAA on network security status, policies, and procedures. What You'll Bring S. citizenship and an active TS/SCI. Ability to successfully obtain and maintain a U.S. Government polygraph. Education and experience, per the contract labor category criteria: Bachelor's degree in a field applicable to the position plus 6 years of relevant experience. Equivalents accepted - Master's plus 4, Associate's plus 8, or High School diploma/GED plus 10. 7+ years hands-on administering, configuring, and troubleshooting Palo Alto NGFWs in large-scale enterprise or global environments. Active PCNSE certification. DoD 8140.01 and 8570.01-M IAT Level II (e.g. Security+ CE), and CSSP Infrastructure Support within 120 days of start. Deep practical knowledge of legacy Gen 2/Gen 3 hardware - PA-3000 and PA-5000 series, legacy CLI, physical troubleshooting, line-card replacement. Prisma Access (SASE), Prisma SD-WAN, and VM-Series in AWS, Azure, or GCP. Panorama template and device-group inheritance across a hybrid fleet. Advanced BGP, OSPF, IPSec VPN, and NAT. Nice to Have PCNSC or Prisma Certified SASE Professional (PCSAE). Python, plus firewall automation with Ansible, Terraform, or the Palo Alto XML/REST APIs. Cortex XDR or XSOAR; Expedition for legacy rule migration to App-ID policy. Zero Trust Network Access architecture; F5 (APM, AFM), Juniper SRX, or Cisco FTD/ASA. About RISA Rolston Information Systems Assurance (RISA) is a Service-Disabled Veteran-Owned Small Business that has supported federal defense and intelligence cybersecurity missions for more than seventeen years. We are small on purpose: direct access to leadership, a real say in how the work gets done, and none of the layers that slow large primes down. Benefits Medical, dental, and vision insurance; 401(k) and Roth; Paid Time Off; and 11 paid Federal Holidays. RISA is an Equal Opportunity Employer. Upon receiving an offer of employment, all applicants will be required to do a background check, including a criminal record check and employment/education verification.

Modal Window

  • Home
  • Contact
  • About Us
  • FAQs
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • IT blog
  • Facebook
  • Twitter
  • LinkedIn
  • Youtube
© 2008-2026 IT Job Board