Job Description This is a hands-on, field-based role focused on maintaining and repairing aerial and underground coax and fiber infrastructure. The technician will work outdoors daily using bucket trucks, ladders, and hand tools to restore service, perform preventative maintenance, and support network reliability. The Broadband Network Technician I is responsible for detecting, troubleshooting and resolving system outages for data, video, and telephone. This role will be responsible for emergency restoration of coax, underground cable, maintenance of power supply, leakage and splicing. The BNT I is required to maintain documentation as needed. This role participates in a 24/7 on-call rotation. Detect, troubleshoot and resolve system outages in aerial and/or underground capacities related to transmission levels, signal losses and off-air interference. Prepare and perform emergency aerial and/or underground coaxial cable restoration due to variables such as cable breaks and/or damage Perform preventative maintenance (power supply, actives) in the form of testing, balancing, alignment and adjustments of components or equipment Monitor, record and repair cable leakage, complying with applicable regulations Observe and assist co-workers with fiber splicing activities Complete and distribute required documentation, such as work orders and daily logs Install, replace, and repair coaxial and fiber optic cabling, including aerial and buried plant Perform pole transfers, span replacements, and drop repairs Operate bucket trucks, ladders, and field equipment Participation in a 24/7 on-call rotation Other duties as assigned What You Bring to the Table: Requirements/Qualifications Education: High school diploma or equivalent 2+ years of hands-on experience in telecom field work, cabling, construction, or utilities (coax, fiber, or electrical) Fiber optic testing and splicing Maintain satisfactory driving record and have a valid driver's license Customer Service Communication (verbal, written) Basic Computer Skills Aptitude to learn to skills Problem solving Time Management Teamwork Working alone Ability to read and interpret maps Bucket Certified; Ohm's Understand the Outside Plant Physical Requirements: Ability to lift and carry up to 75 lbs Work performed in both climate controlled and non climate controlled environments, with potential exposure to heat, cold, dust, damp conditions, uneven surfaces, heights, and moving vehicles Prolonged standing, walking, sitting, and driving required Ability to safely climb and work from ladders for extended periods of time Frequent reaching, pushing, pulling, climbing stairs and ladders, and using hands above and below shoulder level Ability to bend, twist, kneel, squat, crawl, and maintain various body positions and perform fine motor tasks, forceful gripping, and limited keyboarding We're Proud to Offer a Comprehensive Benefits Package Including: 401k retirement plan, with employer match Insurance options including: medical, dental, vision, life and STD insurance Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization Floating Holiday: 40 hours per year Paid Holidays: 7 days per year Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws Tuition reimbursement program Employee discount program Benefits listed above are for regular full-time position The base salary range in Massachusetts for this position is $26.00- $29.00 per hour, plus opportunities for bonus, benefits and commission, if applicable. The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to relevant skills, experience, and capabilities. It is specific to Massachusetts and may not be applicable to other locations. Our Mission Statement: Take care of our customers Take care of each other Do what we say we are going to do Have fun Astound is proud to be an Equal Opportunity Employer, and we are dedicated to cultivating an inclusive workplace where employees feel valued, respected, and empowered. Discrimination of any kind has no place here. We are committed to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, gender, pregnancy, childbirth and related conditions, national origin, age, physical and mental disability, marital status, sexual orientation, genetic information, military or veteran status, citizenship, or other status or characteristic protected by applicable law. We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business. About Astound: Astound is a leading provider of internet, WiFi, mobile, and TV services, dedicated to connecting communities and empowering lives through innovative technology. We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award-winning service, helping organizations thrive in an increasingly connected world. At the forefront of digital transformation, we continuously evolve our offerings to meet the dynamic needs of our customers-delivering reliable connectivity and groundbreaking digital experiences. Our commitment to excellence extends beyond infrastructure. We invest in our people through personalized training, coaching, and a supportive work environment that fosters growth and opportunity. Employees are empowered to represent a superior telecommunications company while making a meaningful impact in the communities we serve. We offer a robust benefits package that includes rewards, recognition programs, and employee discounts-ensuring our team members are supported in both their professional and personal journeys. At Astound, we believe in creating astounding possibilities for everyone, everywhere.
10/25/2026
Full time
Job Description This is a hands-on, field-based role focused on maintaining and repairing aerial and underground coax and fiber infrastructure. The technician will work outdoors daily using bucket trucks, ladders, and hand tools to restore service, perform preventative maintenance, and support network reliability. The Broadband Network Technician I is responsible for detecting, troubleshooting and resolving system outages for data, video, and telephone. This role will be responsible for emergency restoration of coax, underground cable, maintenance of power supply, leakage and splicing. The BNT I is required to maintain documentation as needed. This role participates in a 24/7 on-call rotation. Detect, troubleshoot and resolve system outages in aerial and/or underground capacities related to transmission levels, signal losses and off-air interference. Prepare and perform emergency aerial and/or underground coaxial cable restoration due to variables such as cable breaks and/or damage Perform preventative maintenance (power supply, actives) in the form of testing, balancing, alignment and adjustments of components or equipment Monitor, record and repair cable leakage, complying with applicable regulations Observe and assist co-workers with fiber splicing activities Complete and distribute required documentation, such as work orders and daily logs Install, replace, and repair coaxial and fiber optic cabling, including aerial and buried plant Perform pole transfers, span replacements, and drop repairs Operate bucket trucks, ladders, and field equipment Participation in a 24/7 on-call rotation Other duties as assigned What You Bring to the Table: Requirements/Qualifications Education: High school diploma or equivalent 2+ years of hands-on experience in telecom field work, cabling, construction, or utilities (coax, fiber, or electrical) Fiber optic testing and splicing Maintain satisfactory driving record and have a valid driver's license Customer Service Communication (verbal, written) Basic Computer Skills Aptitude to learn to skills Problem solving Time Management Teamwork Working alone Ability to read and interpret maps Bucket Certified; Ohm's Understand the Outside Plant Physical Requirements: Ability to lift and carry up to 75 lbs Work performed in both climate controlled and non climate controlled environments, with potential exposure to heat, cold, dust, damp conditions, uneven surfaces, heights, and moving vehicles Prolonged standing, walking, sitting, and driving required Ability to safely climb and work from ladders for extended periods of time Frequent reaching, pushing, pulling, climbing stairs and ladders, and using hands above and below shoulder level Ability to bend, twist, kneel, squat, crawl, and maintain various body positions and perform fine motor tasks, forceful gripping, and limited keyboarding We're Proud to Offer a Comprehensive Benefits Package Including: 401k retirement plan, with employer match Insurance options including: medical, dental, vision, life and STD insurance Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization Floating Holiday: 40 hours per year Paid Holidays: 7 days per year Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws Tuition reimbursement program Employee discount program Benefits listed above are for regular full-time position The base salary range in Massachusetts for this position is $26.00- $29.00 per hour, plus opportunities for bonus, benefits and commission, if applicable. The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to relevant skills, experience, and capabilities. It is specific to Massachusetts and may not be applicable to other locations. Our Mission Statement: Take care of our customers Take care of each other Do what we say we are going to do Have fun Astound is proud to be an Equal Opportunity Employer, and we are dedicated to cultivating an inclusive workplace where employees feel valued, respected, and empowered. Discrimination of any kind has no place here. We are committed to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, gender, pregnancy, childbirth and related conditions, national origin, age, physical and mental disability, marital status, sexual orientation, genetic information, military or veteran status, citizenship, or other status or characteristic protected by applicable law. We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business. About Astound: Astound is a leading provider of internet, WiFi, mobile, and TV services, dedicated to connecting communities and empowering lives through innovative technology. We also keep businesses connected with dependable fiber infrastructure and internet solutions backed by award-winning service, helping organizations thrive in an increasingly connected world. At the forefront of digital transformation, we continuously evolve our offerings to meet the dynamic needs of our customers-delivering reliable connectivity and groundbreaking digital experiences. Our commitment to excellence extends beyond infrastructure. We invest in our people through personalized training, coaching, and a supportive work environment that fosters growth and opportunity. Employees are empowered to represent a superior telecommunications company while making a meaningful impact in the communities we serve. We offer a robust benefits package that includes rewards, recognition programs, and employee discounts-ensuring our team members are supported in both their professional and personal journeys. At Astound, we believe in creating astounding possibilities for everyone, everywhere.
Job Description Job Description Special Information This position is an on-site position which requires the incumbent to complete their work primarily at an NAU site, campus, or facility with or without accommodation. Opportunities for remote work are rare. This position is subject to the availability of funding. Driving a vehicle on behalf of the university is anticipated to be a regular part of this position. Arizona Administrative Code Fleet Safety Policy requires all employees who drive on university business become authorized by submitting Driver's license information for driving record monitoring, and completion of training appropriate to the level of driving performed. The law applies to all faculty, staff, and students who drive personal or university-owned motorized vehicles for any business purpose. More information on the NAU Authorized Driver Policy can be found on the NAU website. Due to this project's funding source, this position is open only to U.S. citizens and lawful permanent residents (green card holders). The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Work on this project may involve technical data, hardware, or software subject to U.S. export control regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR); the incumbent must be able to comply with applicable export control requirements and with any project-specific technology control plan. About the Department/College The Radiant Center for Remote Sensing, in partnership with the Dynamic and Active Systems Lab (DASL) in the Steve Sanghi College of Engineering at Northern Arizona University, seeks a Postdoctoral Research Associate to serve as lead technical researcher on a sponsored research project focused on radio source localization from unmanned aerial systems. This is one of several concurrent postdoctoral scholar recruitments at Radiant Center, and the successful candidate will collaborate closely with fellow postdoctoral researchers and faculty working simultaneously on related projects. About the Position The project, EMS Overmatch, develops and field-tests methods for locating radio-frequency sources using an aerial platform, combining signal-based position estimation with path-planning strategies that guide the UAV toward the vantage points that best resolve a source's location. The work builds on the lab's history of developing UAV-based radio-tracking systems, extending that foundation toward more capable localization and platform hardware for this new application area. The general research plan progresses from building out and validating a single-vehicle localization system. This will include hardware integration, field data collection, and flight testing across the varied terrain around Flagstaff. The program will progress toward more advanced localization and path-planning capabilities as the research matures. The postdoc will supervise graduate student researchers supporting the project, work closely with the PI, and contribute to technical reporting and manuscript preparation. The position is based in Flagstaff, AZ. Work Environment: This position requires a substantial amount of fieldwork, including UAV flight testing across Flagstaff-area terrain ranging from desert and canyon country to ponderosa pine, mixed conifer forest, and alpine tundra (spanning close to 8,000 feet of elevation change within about an hour of campus), as well as occasional overnight or multi-day travel for more distant field campaigns and for conference travel. Laboratory work involves electronics assembly/test equipment, RF signal generators and spectrum analyzers, 3D printers, and drone hardware. The position may require occasional overtime, particularly around field campaigns and sponsor reporting deadlines. The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Responsibilities Include 45% - Radio Source Localization & Path Planning Research Lead development of algorithms and software development for real-time radio-frequency (RF) source localization from an aerial platform. Develop and evaluate path-planning strategies that optimize UAV positioning to improve localization accuracy and efficiency. Investigate RF propagation modeling approaches, including terrain-aware and simplified models, to characterize tradeoffs between prediction accuracy and computational cost in complex terrain. Contribute to the ongoing evolution of the project's research approach as findings develop, including potential extensions to additional operating scenarios. 25% - UAV Platform Development, Field Testing & Test Coordination Lead integration and adaptation of UAV hardware and RF-sensing payloads (hardware and software) to meet project and applicable federal hardware requirements. Plan and lead field data collection campaigns and flight tests across varied terrain to support algorithm development and validation. Coordinate test logistics and scheduling with the research team, including field-site arrangements, safety planning, and equipment readiness. Develop simulation-based and hardware-in-the-loop testing of localization and path-planning software. Collaborate with other researchers conducting related work on related topics in a team environment. 15% - Team Supervision & Mentoring Direct the day-to-day technical work of graduate student researchers supporting the project. Mentor graduate students in research methods, technical development, and professional growth. 10% - Dissemination, Reporting & Travel Prepare technical reports and milestone updates for project sponsors. Author and co-author peer-reviewed manuscripts and conference presentations. Travel to attend and present research findings at technical conferences, and travel to field sites to support testing and data collection campaigns. 5% - Other Perform other duties as assigned in support of lab and project needs. Minimum Qualifications Ph.D. in Electrical Engineering, Mechanical Engineering, Robotics, or a closely related field, completed prior to the start date. A combination of related education, experience, and training may be used as an equivalent to the above Minimum Qualifications. Preferred Qualifications Demonstrated research experience in RF signal processing, propagation modeling, source localization, or a closely related discipline such as optimization, estimation, or controls. Proficiency in Python and/or C++. Applied experience with software-defined radio (SDR) systems. Robotic path/trajectory planning or simultaneous localization and mapping (SLAM) experience. Hands-on experience with drone hardware and software, including integrating sensors and compute onto UAV flight- controller/autopilot stacks (e.g., Pixhawk, Cube, ArduPilot/PX4) and edge-compute platforms (e.g., Raspberry Pi). Field research/testing experience with UAV systems Record of peer-reviewed publications in the area of RF topic and/or robotics. Demonstrated ability to mentor and direct graduate student researchers. FAA Part 107 Remote Pilot Certificate, or willingness to obtain one shortly after hire. Knowledge, Skills, & Abilities Strong programming skills in Python and/or C++. Working knowledge of optimization, estimation, or path-planning methods, and RF propagation/signal processing principles. Ability to take initiative and complete complex, ambiguous technical tasks with minimal direct supervision. Ability to synthesize complex technical information into clear written reports, manuscripts, and presentations. Ability to safely plan and execute UAV field operations, including in remote/rugged terrain and under variable weather conditions. Ability to mentor and direct the day-to-day technical work of graduate student researchers. Compensation Salary range begins at $70,000. Annual salary commensurate with candidate's qualifications and related experience. Pre-Employment Check Northern Arizona University requires satisfactory results for the following: a criminal background investigation, an employment history verification and a degree verification (in some cases) prior to employment. You may also be required to complete a fingerprint background check. Also, as an employer in the state of Arizona, NAU is required to participate in the federal E-Verify program that assists employers with verifying new employees' right to work in the United States. This position has been identified as a safety/security sensitive position. Therefore, per AZ Revised Statute, Northern Arizona University requires satisfactory results for the following: a criminal background investigation, employment history investigation, degree verification (in some cases) and fingerprinting. If you are applying for a job that requires a CDL, you will be required to register with the Federal Motor Carrier Safety Administration Drug & Alcohol Clearinghouse and adhere to the clearinghouse requirements. Notice of Availability of the Annual Fire and Security Report Each year Northern Arizona University releases an Annual Security Report. The report is a result of a federal law known as the Clery Act. The report includes Clery reportable crime statistics for the three most recent completed calendar years and discloses procedures . click apply for full job details
10/19/2026
Full time
Job Description Job Description Special Information This position is an on-site position which requires the incumbent to complete their work primarily at an NAU site, campus, or facility with or without accommodation. Opportunities for remote work are rare. This position is subject to the availability of funding. Driving a vehicle on behalf of the university is anticipated to be a regular part of this position. Arizona Administrative Code Fleet Safety Policy requires all employees who drive on university business become authorized by submitting Driver's license information for driving record monitoring, and completion of training appropriate to the level of driving performed. The law applies to all faculty, staff, and students who drive personal or university-owned motorized vehicles for any business purpose. More information on the NAU Authorized Driver Policy can be found on the NAU website. Due to this project's funding source, this position is open only to U.S. citizens and lawful permanent residents (green card holders). The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Work on this project may involve technical data, hardware, or software subject to U.S. export control regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR); the incumbent must be able to comply with applicable export control requirements and with any project-specific technology control plan. About the Department/College The Radiant Center for Remote Sensing, in partnership with the Dynamic and Active Systems Lab (DASL) in the Steve Sanghi College of Engineering at Northern Arizona University, seeks a Postdoctoral Research Associate to serve as lead technical researcher on a sponsored research project focused on radio source localization from unmanned aerial systems. This is one of several concurrent postdoctoral scholar recruitments at Radiant Center, and the successful candidate will collaborate closely with fellow postdoctoral researchers and faculty working simultaneously on related projects. About the Position The project, EMS Overmatch, develops and field-tests methods for locating radio-frequency sources using an aerial platform, combining signal-based position estimation with path-planning strategies that guide the UAV toward the vantage points that best resolve a source's location. The work builds on the lab's history of developing UAV-based radio-tracking systems, extending that foundation toward more capable localization and platform hardware for this new application area. The general research plan progresses from building out and validating a single-vehicle localization system. This will include hardware integration, field data collection, and flight testing across the varied terrain around Flagstaff. The program will progress toward more advanced localization and path-planning capabilities as the research matures. The postdoc will supervise graduate student researchers supporting the project, work closely with the PI, and contribute to technical reporting and manuscript preparation. The position is based in Flagstaff, AZ. Work Environment: This position requires a substantial amount of fieldwork, including UAV flight testing across Flagstaff-area terrain ranging from desert and canyon country to ponderosa pine, mixed conifer forest, and alpine tundra (spanning close to 8,000 feet of elevation change within about an hour of campus), as well as occasional overnight or multi-day travel for more distant field campaigns and for conference travel. Laboratory work involves electronics assembly/test equipment, RF signal generators and spectrum analyzers, 3D printers, and drone hardware. The position may require occasional overtime, particularly around field campaigns and sponsor reporting deadlines. The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Responsibilities Include 45% - Radio Source Localization & Path Planning Research Lead development of algorithms and software development for real-time radio-frequency (RF) source localization from an aerial platform. Develop and evaluate path-planning strategies that optimize UAV positioning to improve localization accuracy and efficiency. Investigate RF propagation modeling approaches, including terrain-aware and simplified models, to characterize tradeoffs between prediction accuracy and computational cost in complex terrain. Contribute to the ongoing evolution of the project's research approach as findings develop, including potential extensions to additional operating scenarios. 25% - UAV Platform Development, Field Testing & Test Coordination Lead integration and adaptation of UAV hardware and RF-sensing payloads (hardware and software) to meet project and applicable federal hardware requirements. Plan and lead field data collection campaigns and flight tests across varied terrain to support algorithm development and validation. Coordinate test logistics and scheduling with the research team, including field-site arrangements, safety planning, and equipment readiness. Develop simulation-based and hardware-in-the-loop testing of localization and path-planning software. Collaborate with other researchers conducting related work on related topics in a team environment. 15% - Team Supervision & Mentoring Direct the day-to-day technical work of graduate student researchers supporting the project. Mentor graduate students in research methods, technical development, and professional growth. 10% - Dissemination, Reporting & Travel Prepare technical reports and milestone updates for project sponsors. Author and co-author peer-reviewed manuscripts and conference presentations. Travel to attend and present research findings at technical conferences, and travel to field sites to support testing and data collection campaigns. 5% - Other Perform other duties as assigned in support of lab and project needs. Minimum Qualifications Ph.D. in Electrical Engineering, Mechanical Engineering, Robotics, or a closely related field, completed prior to the start date. A combination of related education, experience, and training may be used as an equivalent to the above Minimum Qualifications. Preferred Qualifications Demonstrated research experience in RF signal processing, propagation modeling, source localization, or a closely related discipline such as optimization, estimation, or controls. Proficiency in Python and/or C++. Applied experience with software-defined radio (SDR) systems. Robotic path/trajectory planning or simultaneous localization and mapping (SLAM) experience. Hands-on experience with drone hardware and software, including integrating sensors and compute onto UAV flight- controller/autopilot stacks (e.g., Pixhawk, Cube, ArduPilot/PX4) and edge-compute platforms (e.g., Raspberry Pi). Field research/testing experience with UAV systems Record of peer-reviewed publications in the area of RF topic and/or robotics. Demonstrated ability to mentor and direct graduate student researchers. FAA Part 107 Remote Pilot Certificate, or willingness to obtain one shortly after hire. Knowledge, Skills, & Abilities Strong programming skills in Python and/or C++. Working knowledge of optimization, estimation, or path-planning methods, and RF propagation/signal processing principles. Ability to take initiative and complete complex, ambiguous technical tasks with minimal direct supervision. Ability to synthesize complex technical information into clear written reports, manuscripts, and presentations. Ability to safely plan and execute UAV field operations, including in remote/rugged terrain and under variable weather conditions. Ability to mentor and direct the day-to-day technical work of graduate student researchers. Compensation Salary range begins at $70,000. Annual salary commensurate with candidate's qualifications and related experience. Pre-Employment Check Northern Arizona University requires satisfactory results for the following: a criminal background investigation, an employment history verification and a degree verification (in some cases) prior to employment. You may also be required to complete a fingerprint background check. Also, as an employer in the state of Arizona, NAU is required to participate in the federal E-Verify program that assists employers with verifying new employees' right to work in the United States. This position has been identified as a safety/security sensitive position. Therefore, per AZ Revised Statute, Northern Arizona University requires satisfactory results for the following: a criminal background investigation, employment history investigation, degree verification (in some cases) and fingerprinting. If you are applying for a job that requires a CDL, you will be required to register with the Federal Motor Carrier Safety Administration Drug & Alcohol Clearinghouse and adhere to the clearinghouse requirements. Notice of Availability of the Annual Fire and Security Report Each year Northern Arizona University releases an Annual Security Report. The report is a result of a federal law known as the Clery Act. The report includes Clery reportable crime statistics for the three most recent completed calendar years and discloses procedures . click apply for full job details
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking an Underground Laborer to join our team in Plover, WI . In this role you will support both aerial and underground telecom construction by performing hands-on tasks such as trenching, conduit placement, material handling, and fiber installation. You will assist with fiber blowing, basic troubleshooting, and equipment operation while learning to read maps, schematics, and network designs. This position is ideal for someone who enjoys physical work, values safety, and wants to grow their technical skills in RF and fiber networks. Why TAK? Full Time Paid Weekly Compensation: $20 - $24 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Perform a variety of manual labor tasks including trenching, site preparation, conduit placement, and general construction support using standard hand tools Assist with fiber installation activities such as fiber blowing, pulling, and relocating RF and fiber services, as well as constructing and repairing underground fiber and RF lines Support aerial and underground crews as trained, including basic troubleshooting of RF and fiber issues Operate vehicles, trailers, and equipment as certified, and assist with equipment setup such as reel trailers, line trucks, bucket trucks, saws, and drills Handle material movement, job site cleanup, and routine maintenance tasks as directed Read maps, design schematics, and project diagrams, and learn required inventory and materials for each build Follow all safety procedures, adhere to NESC guidelines, and maintain a safe work environment on every job site Other duties as assigned Requirements: Strong daily commitment to safety Consistent track record of delivering high-quality work Ability to solve complex field problems with a hands-on approach Practical experience in overhead construction for RF and Fiber Extensive knowledge of RF and Fiber network architecture, design, and bill of materials Ability to read and interpret maps, drawings, schematics, and other project documentation Knowledge of applicable city, county, and state clearance codes Comfortable working directly with field crews and performing physically demanding tasks, including lifting up to 70 lbs Holds required field certifications (e.g., climbing, Flagger) Effective verbal, written, and phone communication skills Able to perform well in a fast-paced, high-volume environment Interest in long-term, ongoing project work Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
10/19/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking an Underground Laborer to join our team in Plover, WI . In this role you will support both aerial and underground telecom construction by performing hands-on tasks such as trenching, conduit placement, material handling, and fiber installation. You will assist with fiber blowing, basic troubleshooting, and equipment operation while learning to read maps, schematics, and network designs. This position is ideal for someone who enjoys physical work, values safety, and wants to grow their technical skills in RF and fiber networks. Why TAK? Full Time Paid Weekly Compensation: $20 - $24 per hour, DOE Full Benefits Package (Medical, Dental & Vision) Paid Time Off 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Perform a variety of manual labor tasks including trenching, site preparation, conduit placement, and general construction support using standard hand tools Assist with fiber installation activities such as fiber blowing, pulling, and relocating RF and fiber services, as well as constructing and repairing underground fiber and RF lines Support aerial and underground crews as trained, including basic troubleshooting of RF and fiber issues Operate vehicles, trailers, and equipment as certified, and assist with equipment setup such as reel trailers, line trucks, bucket trucks, saws, and drills Handle material movement, job site cleanup, and routine maintenance tasks as directed Read maps, design schematics, and project diagrams, and learn required inventory and materials for each build Follow all safety procedures, adhere to NESC guidelines, and maintain a safe work environment on every job site Other duties as assigned Requirements: Strong daily commitment to safety Consistent track record of delivering high-quality work Ability to solve complex field problems with a hands-on approach Practical experience in overhead construction for RF and Fiber Extensive knowledge of RF and Fiber network architecture, design, and bill of materials Ability to read and interpret maps, drawings, schematics, and other project documentation Knowledge of applicable city, county, and state clearance codes Comfortable working directly with field crews and performing physically demanding tasks, including lifting up to 70 lbs Holds required field certifications (e.g., climbing, Flagger) Effective verbal, written, and phone communication skills Able to perform well in a fast-paced, high-volume environment Interest in long-term, ongoing project work Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking entry level and experienced Laborers (CDL required) to join our construction team in Prescott Valley, AZ and the surrounding areas (Sedona, Flagstaff, Prescott, Prescott Valley, Cottonwood, etc. - need to be able to travel with crew). In this role you will support both aerial and underground telecom construction by performing hands-on tasks such as trenching, conduit placement, material handling, and fiber installation. You will assist with fiber blowing, basic troubleshooting, and equipment operation while learning to read maps, schematics, and network designs. This position is ideal for someone who enjoys physical work, values safety, and wants to grow their technical skills in fiber networks Why Join Our Team? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Paid Time Off Full Benefits Package (Medical, Dental & Vision) 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Perform a variety of manual labor tasks including trenching, site preparation, conduit placement, and general construction support using standard hand tools Assist with fiber installation activities such as fiber blowing, pulling, and relocating RF and fiber services, as well as constructing and repairing underground fiber and coax lines Support aerial and underground crews as trained, including basic troubleshooting of RF and fiber issues Operate vehicles, trailers, and equipment as certified, and assist with equipment setup such as reel trailers, line trucks, bucket trucks, saws, and drills Handle material movement, job site cleanup, and routine maintenance tasks as directed Read maps, design schematics, and project diagrams, and learn required inventory and materials for each build Follow all safety procedures, adhere to NESC guidelines, and maintain a safe work environment on every job site Travel within 75 mile radius with some possible overnight stays Other duties as assigned Requirements: Practical experience in overhead construction for fiber Extensive knowledge of coax and fiber network architecture, design, and bill of materials a plus Ability to read and interpret maps, drawings, schematics, and other project documentation Ability to solve complex field problems with a hands-on approach Knowledge of applicable city, county, and state clearance codes Comfortable working directly with field crews and performing physically demanding tasks, including lifting up to 70 lbs Holds field certifications (e.g., climbing, Flagger) a plus Must have reliable transportation to report to the yard daily; company vehicle provided for travel to job sites Ability to travel within 75-mile radius with some possible overnight stays Effective verbal, written, and phone communication skills Able to perform well in a fast-paced, high-volume environment Interest in long-term, ongoing project work Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
10/19/2026
Full time
Job Description Job Description Description: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking entry level and experienced Laborers (CDL required) to join our construction team in Prescott Valley, AZ and the surrounding areas (Sedona, Flagstaff, Prescott, Prescott Valley, Cottonwood, etc. - need to be able to travel with crew). In this role you will support both aerial and underground telecom construction by performing hands-on tasks such as trenching, conduit placement, material handling, and fiber installation. You will assist with fiber blowing, basic troubleshooting, and equipment operation while learning to read maps, schematics, and network designs. This position is ideal for someone who enjoys physical work, values safety, and wants to grow their technical skills in fiber networks Why Join Our Team? Full Time Paid Weekly Compensation: $20 - $28 per hour, DOE Paid Time Off Full Benefits Package (Medical, Dental & Vision) 401(k) with Company Match! 25K Company Paid Life Insurance Independent Work & Team Collaboration Career Development & Advancement Opportunities! The Role Perform a variety of manual labor tasks including trenching, site preparation, conduit placement, and general construction support using standard hand tools Assist with fiber installation activities such as fiber blowing, pulling, and relocating RF and fiber services, as well as constructing and repairing underground fiber and coax lines Support aerial and underground crews as trained, including basic troubleshooting of RF and fiber issues Operate vehicles, trailers, and equipment as certified, and assist with equipment setup such as reel trailers, line trucks, bucket trucks, saws, and drills Handle material movement, job site cleanup, and routine maintenance tasks as directed Read maps, design schematics, and project diagrams, and learn required inventory and materials for each build Follow all safety procedures, adhere to NESC guidelines, and maintain a safe work environment on every job site Travel within 75 mile radius with some possible overnight stays Other duties as assigned Requirements: Practical experience in overhead construction for fiber Extensive knowledge of coax and fiber network architecture, design, and bill of materials a plus Ability to read and interpret maps, drawings, schematics, and other project documentation Ability to solve complex field problems with a hands-on approach Knowledge of applicable city, county, and state clearance codes Comfortable working directly with field crews and performing physically demanding tasks, including lifting up to 70 lbs Holds field certifications (e.g., climbing, Flagger) a plus Must have reliable transportation to report to the yard daily; company vehicle provided for travel to job sites Ability to travel within 75-mile radius with some possible overnight stays Effective verbal, written, and phone communication skills Able to perform well in a fast-paced, high-volume environment Interest in long-term, ongoing project work Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting
Job Description Job Description Who We Are Griffon Aerospace designs, builds, and flies unmanned aerial systems that perform. We are a focused team of engineers and operators who care about mission success before satisfying any other "metrics." We don't hand work off and walk away. We own it. Our culture is defined by technical rigor, follow-through, and refusal to accept "good enough." The Role We're looking for someone to take ownership of our custom flight control hardware and avionics components across our UAS portfolio. Griffon hires engineers who have built things that fly and know what it means to carry a board from schematic to flight line. You'll own the spiral development lifecycle of our flight control hardware end-to-end. You should know your way around an aircraft development program, understand what integration with flight software and airframes involves, and be comfortable working at a test bench or the flight line as easily as at a desk running analysis tools. This role is responsible for ensuring flight control hardware reliability and airworthiness from concept through fielded sustainment, including new hardware development, sustaining engineering on deployed platforms, supplier oversight, and certification support. The ideal candidate combines hands-on avionics hardware expertise with the systems-engineering discipline needed to manage a critical subsystem through iterative spiral development and its full lifecycle. Key ResponsibilitiesDesign & Spiral Development Engineering- Lead design, analysis, and iterative spiral development of custom flight control hardware and the avionics stack, including processing, sensor, power, and interface subsystems.- Own root-cause investigations and corrective actions for hardware issues identified in test or in the field; manage engineering change requests through the full approval cycle across each development spiral.- Balance size, weight, power (SWaP), redundancy, and reliability trade-offs specific to UAV flight control requirements.- Collaborate with firmware, software, airframe, and manufacturing teams to ensure flight control hardware and avionics integration meets platform-level requirements.- Provide technical support to production, field service, and customer support teams for fielded avionics hardware.Reliability & Durability Testing- Develop and execute test plans for environmental, EMI/EMC, vibration, and thermal qualification of flight control hardware and avionics.- Define and track reliability metrics (MTBF, MTBUR) and failure modes across fielded avionics hardware; drive design and process changes from test and field data.- Oversee bench and flight test instrumentation, data collection, and reporting for avionics and flight control test campaigns.- Maintain engineering documentation, schematics, BOMs, and interface control documents in compliance with applicable military and industry standards.- Prepare technical substantiation, test reports, and compliance evidence for customer and regulatory review.Supplier & Vendor Management- Identify, qualify, and manage suppliers of avionics components, custom PCBs, and flight control hardware, including source inspections and incoming quality requirements.- Manage supplier corrective action requests (SCARs) and work with vendors to resolve quality, cost, and schedule issues.- Support make/buy decisions and second-source strategies to reduce supply chain risk for critical flight control and avionics components.What We're Looking ForRequired- Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.- 7+ years of experience in electrical/avionics hardware design, development, or sustaining engineering, with direct hands-on experience in flight control or embedded avionics hardware.- Demonstrated experience taking hardware through a qualification or certification process.- Experience managing suppliers or vendors for custom PCBs or critical electronic components.- Working knowledge of reliability engineering principles (FMEA, root-cause analysis, MTBF/MTBUR).- Proficiency with EDA/schematic capture tools (e.g., Altium, OrCAD, or equivalent) and engineering documentation/PLM systems.- Strong written and verbal communication skills, including experience preparing technical reports and customer-facing documentation.- U.S. Citizenship required; ability to obtain and maintain a security clearance. Strongly Preferred- Experience with UAV/UAS flight control systems, autopilots, or other small, high-reliability embedded avionics.- Familiarity with military airworthiness or certification standards (e.g., MIL-HDBK-516, DO-254, DO-160, AS9100 quality systems).- Experience with avionics test bench design, instrumentation, and data acquisition systems.- Background supporting DoD or government aerospace programs.- Master's degree in a relevant engineering discipline. The Kind of Person Who Thrives Here You show up. When something is broken in the field, you're on a plane. You don't manage from behind a screen. You don't quit. Problems are resolved, not deferred. You find a way or you make one. You own the outcome but share the glory. The whole thing. If the program is late, that's yours. If it delivers, the team is praised not just you. You communicate first. Plans, issues, and new data travel fast here. What Griffon Offers Competitive salary commensurate with experience and clearance level Comprehensive benefits: medical, dental, vision, 401(k) with company match Paid time off and 10 federal holidays Relocation assistance available for qualified candidates A small company where your decisions matter and your fingerprints are on real hardware flying real missions Griffon Aerospace - Come Build the Unfair Advantage. Job Posted by ApplicantPro
10/18/2026
Full time
Job Description Job Description Who We Are Griffon Aerospace designs, builds, and flies unmanned aerial systems that perform. We are a focused team of engineers and operators who care about mission success before satisfying any other "metrics." We don't hand work off and walk away. We own it. Our culture is defined by technical rigor, follow-through, and refusal to accept "good enough." The Role We're looking for someone to take ownership of our custom flight control hardware and avionics components across our UAS portfolio. Griffon hires engineers who have built things that fly and know what it means to carry a board from schematic to flight line. You'll own the spiral development lifecycle of our flight control hardware end-to-end. You should know your way around an aircraft development program, understand what integration with flight software and airframes involves, and be comfortable working at a test bench or the flight line as easily as at a desk running analysis tools. This role is responsible for ensuring flight control hardware reliability and airworthiness from concept through fielded sustainment, including new hardware development, sustaining engineering on deployed platforms, supplier oversight, and certification support. The ideal candidate combines hands-on avionics hardware expertise with the systems-engineering discipline needed to manage a critical subsystem through iterative spiral development and its full lifecycle. Key ResponsibilitiesDesign & Spiral Development Engineering- Lead design, analysis, and iterative spiral development of custom flight control hardware and the avionics stack, including processing, sensor, power, and interface subsystems.- Own root-cause investigations and corrective actions for hardware issues identified in test or in the field; manage engineering change requests through the full approval cycle across each development spiral.- Balance size, weight, power (SWaP), redundancy, and reliability trade-offs specific to UAV flight control requirements.- Collaborate with firmware, software, airframe, and manufacturing teams to ensure flight control hardware and avionics integration meets platform-level requirements.- Provide technical support to production, field service, and customer support teams for fielded avionics hardware.Reliability & Durability Testing- Develop and execute test plans for environmental, EMI/EMC, vibration, and thermal qualification of flight control hardware and avionics.- Define and track reliability metrics (MTBF, MTBUR) and failure modes across fielded avionics hardware; drive design and process changes from test and field data.- Oversee bench and flight test instrumentation, data collection, and reporting for avionics and flight control test campaigns.- Maintain engineering documentation, schematics, BOMs, and interface control documents in compliance with applicable military and industry standards.- Prepare technical substantiation, test reports, and compliance evidence for customer and regulatory review.Supplier & Vendor Management- Identify, qualify, and manage suppliers of avionics components, custom PCBs, and flight control hardware, including source inspections and incoming quality requirements.- Manage supplier corrective action requests (SCARs) and work with vendors to resolve quality, cost, and schedule issues.- Support make/buy decisions and second-source strategies to reduce supply chain risk for critical flight control and avionics components.What We're Looking ForRequired- Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.- 7+ years of experience in electrical/avionics hardware design, development, or sustaining engineering, with direct hands-on experience in flight control or embedded avionics hardware.- Demonstrated experience taking hardware through a qualification or certification process.- Experience managing suppliers or vendors for custom PCBs or critical electronic components.- Working knowledge of reliability engineering principles (FMEA, root-cause analysis, MTBF/MTBUR).- Proficiency with EDA/schematic capture tools (e.g., Altium, OrCAD, or equivalent) and engineering documentation/PLM systems.- Strong written and verbal communication skills, including experience preparing technical reports and customer-facing documentation.- U.S. Citizenship required; ability to obtain and maintain a security clearance. Strongly Preferred- Experience with UAV/UAS flight control systems, autopilots, or other small, high-reliability embedded avionics.- Familiarity with military airworthiness or certification standards (e.g., MIL-HDBK-516, DO-254, DO-160, AS9100 quality systems).- Experience with avionics test bench design, instrumentation, and data acquisition systems.- Background supporting DoD or government aerospace programs.- Master's degree in a relevant engineering discipline. The Kind of Person Who Thrives Here You show up. When something is broken in the field, you're on a plane. You don't manage from behind a screen. You don't quit. Problems are resolved, not deferred. You find a way or you make one. You own the outcome but share the glory. The whole thing. If the program is late, that's yours. If it delivers, the team is praised not just you. You communicate first. Plans, issues, and new data travel fast here. What Griffon Offers Competitive salary commensurate with experience and clearance level Comprehensive benefits: medical, dental, vision, 401(k) with company match Paid time off and 10 federal holidays Relocation assistance available for qualified candidates A small company where your decisions matter and your fingerprints are on real hardware flying real missions Griffon Aerospace - Come Build the Unfair Advantage. Job Posted by ApplicantPro
Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.
10/07/2026
Full time
Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.
Job Description Job Description Location: Cheyenne, WY and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/07/2026
Full time
Job Description Job Description Location: Cheyenne, WY and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description Location: Madison, WI and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/02/2026
Full time
Job Description Job Description Location: Madison, WI and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/02/2026
Full time
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/02/2026
Full time
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/02/2026
Full time
Job Description Job Description Location: Billings and Bozeman, MT and surrounding areas Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is to make life better by innovating tomorrow's communication solutions today. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Splice and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description Location: Columbia, MO and surrounding areas; Tulsa and Oklahoma City, OK; and Wichita, KS Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is making life better through devotion to our world class employees and delivering innovative solutions for our customers. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Install and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off or 3 weeks on and 1 week off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
10/02/2026
Full time
Job Description Job Description Location: Columbia, MO and surrounding areas; Tulsa and Oklahoma City, OK; and Wichita, KS Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee's hard work and determination and REWARD results all while having fun! Our mission is making life better through devotion to our world class employees and delivering innovative solutions for our customers. We are seeking Fiber Splicers who hold a crucial position in guaranteeing prompt delivery and excellence in Telecommunications services for our clientele. Responsibilities include deciphering schematics and diagrams to splice, terminate, and test fiber-optic connections for both new constructions and service setups. Additionally, the role involves the maintenance, troubleshooting, and rectification of damaged cables and associated concerns within the outside plant network. Responsibilities Install and maintain new and existing fiber. Prep and splice single-mode (SM) and multi-mode (MM) optical fiber cables ranging from single to ribbon and loose tube. Splice and repair fiber optic cables using single and mass fusion equipment. Terminate fiber using various connectors or pig tails. Test fiber using OTDR, OLTS, Power Meters, and VFL. Install required splice capsules and hardware. Perform mid-sheath cable entries along with the ability to splice fibers in an active network. Maintain existing plant without causing signal failure interruptions. Respond to network outages and perform required troubleshooting and repairs. Keep up-to-date records of project progress, including production sheets, time sheets, and necessary customer documentation. Maintain splice equipment, trailers, and vehicles. Complete certification testing of fiber optic systems. Experienced in understanding and adhering to safety including those outlined by OSHA, NESC, NEC, and other pertinent standards. Maintain knowledge of all organizational policies and governmental regulations. Maintain a safe work environment by following CCI's policies and procedures. Perform other duties as assigned by management. Qualifications 2+ years of fiber splicing and troubleshooting experience preferred. Knowledge of fiber optic theory which includes fiber loss connector types and the different types of fibers preferred. Experience with both ribbon fiber and loose tube with combination in deribbonizing and ribbonizing preferred. Ability to test fiber using OTDR, OLTS, Power Meters, and VFL preferred. Ability to use single and mass fusion splicing machines preferred. Ability to differentiate between different fiber sizes and colors preferred. Ability to read splicing matrix, splice, and test fiber in various environments like FTTH, underground, and aerial preferred. Ability to place aerial and underground splice closures along with other closures common to the splicing and termination of fiber-optic cables preferred. Capable of efficiently accomplishing the allocated workload within the specified timeframe while maintaining exceptional quality standards. Proficient in prioritizing tasks and adapting schedules to accommodate evolving requirements. Ability to detect safety issues and work independently. Record and document testing per customer specifications. Complete daily production reports to document work performed. Good communication and organizational skills. Proficient with MS Office and various web-based software. Self-starter and dependable with great attention to detail. Time requirement Must be willing to travel up to 100%; may include overnight stays on a weekly basis dependent on candidate location and region. If further travel is required, this could consist of 10 days on and 4-5 days off or 3 weeks on and 1 week off. Maintenance of customer networks may entail working outside regular business hours, including evening and overnight shifts. Candidates may eventually be required to be on call on a rotational basis which may include nights and weekends. General information Must have a valid driver's license acceptable driving record. Must be able to pass a DOT physical. Piece rate after initial training has been completed and able to work independently. Must provide own hand tools to satisfactorily complete all job functions. Specialty tools will be provided. Willing to work indoors in confined space, poorly ventilated areas such as attics, basements, crawlspaces, and/or manholes. Exposure to dust, dirt, noise, insects, rodents, pets, and cleaning solutions. Able and willing to work outdoors and in inclement weather conditions. Ability to work up to 50' in a bucket truck, ladder, and/or climb utility poles. Mechanically inclined and able to use hand tools and equipment to help complete an assigned project. Maintain a professional working attitude with co-workers and customers. Maintain a clean, neat, professional appearance. CCI Systems, Inc. is an Affirmative Action/Equal Opportunity Employer.
Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.
10/02/2026
Full time
Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.
Job Description Job Description Special Information This position is an on-site position which requires the incumbent to complete their work primarily at an NAU site, campus, or facility with or without accommodation. Opportunities for remote work are rare. This position is subject to the availability of funding. Driving a vehicle on behalf of the university is anticipated to be a regular part of this position. Arizona Administrative Code Fleet Safety Policy requires all employees who drive on university business become authorized by submitting Driver's license information for driving record monitoring, and completion of training appropriate to the level of driving performed. The law applies to all faculty, staff, and students who drive personal or university-owned motorized vehicles for any business purpose. More information on the NAU Authorized Driver Policy can be found on the NAU website. Due to this project's funding source, this position is open only to U.S. citizens and lawful permanent residents (green card holders). The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Work on this project may involve technical data, hardware, or software subject to U.S. export control regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR); the incumbent must be able to comply with applicable export control requirements and with any project-specific technology control plan. About the Department/College The Radiant Center for Remote Sensing, in partnership with the Dynamic and Active Systems Lab (DASL) in the Steve Sanghi College of Engineering at Northern Arizona University, seeks a Postdoctoral Research Associate to serve as lead technical researcher on a sponsored research project focused on radio source localization from unmanned aerial systems. This is one of several concurrent postdoctoral scholar recruitments at Radiant Center, and the successful candidate will collaborate closely with fellow postdoctoral researchers and faculty working simultaneously on related projects. About the Position The project, EMS Overmatch, develops and field-tests methods for locating radio-frequency sources using an aerial platform, combining signal-based position estimation with path-planning strategies that guide the UAV toward the vantage points that best resolve a source's location. The work builds on the lab's history of developing UAV-based radio-tracking systems, extending that foundation toward more capable localization and platform hardware for this new application area. The general research plan progresses from building out and validating a single-vehicle localization system. This will include hardware integration, field data collection, and flight testing across the varied terrain around Flagstaff. The program will progress toward more advanced localization and path-planning capabilities as the research matures. The postdoc will supervise graduate student researchers supporting the project, work closely with the PI, and contribute to technical reporting and manuscript preparation. The position is based in Flagstaff, AZ. Work Environment: This position requires a substantial amount of fieldwork, including UAV flight testing across Flagstaff-area terrain ranging from desert and canyon country to ponderosa pine, mixed conifer forest, and alpine tundra (spanning close to 8,000 feet of elevation change within about an hour of campus), as well as occasional overnight or multi-day travel for more distant field campaigns and for conference travel. Laboratory work involves electronics assembly/test equipment, RF signal generators and spectrum analyzers, 3D printers, and drone hardware. The position may require occasional overtime, particularly around field campaigns and sponsor reporting deadlines. The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Responsibilities Include 45% - Radio Source Localization & Path Planning Research Lead development of algorithms and software development for real-time radio-frequency (RF) source localization from an aerial platform. Develop and evaluate path-planning strategies that optimize UAV positioning to improve localization accuracy and efficiency. Investigate RF propagation modeling approaches, including terrain-aware and simplified models, to characterize tradeoffs between prediction accuracy and computational cost in complex terrain. Contribute to the ongoing evolution of the project's research approach as findings develop, including potential extensions to additional operating scenarios. 25% - UAV Platform Development, Field Testing & Test Coordination Lead integration and adaptation of UAV hardware and RF-sensing payloads (hardware and software) to meet project and applicable federal hardware requirements. Plan and lead field data collection campaigns and flight tests across varied terrain to support algorithm development and validation. Coordinate test logistics and scheduling with the research team, including field-site arrangements, safety planning, and equipment readiness. Develop simulation-based and hardware-in-the-loop testing of localization and path-planning software. Collaborate with other researchers conducting related work on related topics in a team environment. 15% - Team Supervision & Mentoring Direct the day-to-day technical work of graduate student researchers supporting the project. Mentor graduate students in research methods, technical development, and professional growth. 10% - Dissemination, Reporting & Travel Prepare technical reports and milestone updates for project sponsors. Author and co-author peer-reviewed manuscripts and conference presentations. Travel to attend and present research findings at technical conferences, and travel to field sites to support testing and data collection campaigns. 5% - Other Perform other duties as assigned in support of lab and project needs. Minimum Qualifications Ph.D. in Electrical Engineering, Mechanical Engineering, Robotics, or a closely related field, completed prior to the start date. A combination of related education, experience, and training may be used as an equivalent to the above Minimum Qualifications. Preferred Qualifications Demonstrated research experience in RF signal processing, propagation modeling, source localization, or a closely related discipline such as optimization, estimation, or controls. Proficiency in Python and/or C++. Applied experience with software-defined radio (SDR) systems. Robotic path/trajectory planning or simultaneous localization and mapping (SLAM) experience. Hands-on experience with drone hardware and software, including integrating sensors and compute onto UAV flight- controller/autopilot stacks (e.g., Pixhawk, Cube, ArduPilot/PX4) and edge-compute platforms (e.g., Raspberry Pi). Field research/testing experience with UAV systems Record of peer-reviewed publications in the area of RF topic and/or robotics. Demonstrated ability to mentor and direct graduate student researchers. FAA Part 107 Remote Pilot Certificate, or willingness to obtain one shortly after hire. Knowledge, Skills, & Abilities Strong programming skills in Python and/or C++. Working knowledge of optimization, estimation, or path-planning methods, and RF propagation/signal processing principles. Ability to take initiative and complete complex, ambiguous technical tasks with minimal direct supervision. Ability to synthesize complex technical information into clear written reports, manuscripts, and presentations. Ability to safely plan and execute UAV field operations, including in remote/rugged terrain and under variable weather conditions. Ability to mentor and direct the day-to-day technical work of graduate student researchers. Compensation Salary range begins at $70,000. Annual salary commensurate with candidate's qualifications and related experience. Pre-Employment Check Northern Arizona University requires satisfactory results for the following: a criminal background investigation, an employment history verification and a degree verification (in some cases) prior to employment. You may also be required to complete a fingerprint background check. Also, as an employer in the state of Arizona, NAU is required to participate in the federal E-Verify program that assists employers with verifying new employees' right to work in the United States. This position has been identified as a safety/security sensitive position. Therefore, per AZ Revised Statute, Northern Arizona University requires satisfactory results for the following: a criminal background investigation, employment history investigation, degree verification (in some cases) and fingerprinting. If you are applying for a job that requires a CDL, you will be required to register with the Federal Motor Carrier Safety Administration Drug & Alcohol Clearinghouse and adhere to the clearinghouse requirements. Notice of Availability of the Annual Fire and Security Report Each year Northern Arizona University releases an Annual Security Report. The report is a result of a federal law known as the Clery Act. The report includes Clery reportable crime statistics for the three most recent completed calendar years and discloses procedures . click apply for full job details
09/28/2026
Full time
Job Description Job Description Special Information This position is an on-site position which requires the incumbent to complete their work primarily at an NAU site, campus, or facility with or without accommodation. Opportunities for remote work are rare. This position is subject to the availability of funding. Driving a vehicle on behalf of the university is anticipated to be a regular part of this position. Arizona Administrative Code Fleet Safety Policy requires all employees who drive on university business become authorized by submitting Driver's license information for driving record monitoring, and completion of training appropriate to the level of driving performed. The law applies to all faculty, staff, and students who drive personal or university-owned motorized vehicles for any business purpose. More information on the NAU Authorized Driver Policy can be found on the NAU website. Due to this project's funding source, this position is open only to U.S. citizens and lawful permanent residents (green card holders). The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Work on this project may involve technical data, hardware, or software subject to U.S. export control regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR); the incumbent must be able to comply with applicable export control requirements and with any project-specific technology control plan. About the Department/College The Radiant Center for Remote Sensing, in partnership with the Dynamic and Active Systems Lab (DASL) in the Steve Sanghi College of Engineering at Northern Arizona University, seeks a Postdoctoral Research Associate to serve as lead technical researcher on a sponsored research project focused on radio source localization from unmanned aerial systems. This is one of several concurrent postdoctoral scholar recruitments at Radiant Center, and the successful candidate will collaborate closely with fellow postdoctoral researchers and faculty working simultaneously on related projects. About the Position The project, EMS Overmatch, develops and field-tests methods for locating radio-frequency sources using an aerial platform, combining signal-based position estimation with path-planning strategies that guide the UAV toward the vantage points that best resolve a source's location. The work builds on the lab's history of developing UAV-based radio-tracking systems, extending that foundation toward more capable localization and platform hardware for this new application area. The general research plan progresses from building out and validating a single-vehicle localization system. This will include hardware integration, field data collection, and flight testing across the varied terrain around Flagstaff. The program will progress toward more advanced localization and path-planning capabilities as the research matures. The postdoc will supervise graduate student researchers supporting the project, work closely with the PI, and contribute to technical reporting and manuscript preparation. The position is based in Flagstaff, AZ. Work Environment: This position requires a substantial amount of fieldwork, including UAV flight testing across Flagstaff-area terrain ranging from desert and canyon country to ponderosa pine, mixed conifer forest, and alpine tundra (spanning close to 8,000 feet of elevation change within about an hour of campus), as well as occasional overnight or multi-day travel for more distant field campaigns and for conference travel. Laboratory work involves electronics assembly/test equipment, RF signal generators and spectrum analyzers, 3D printers, and drone hardware. The position may require occasional overtime, particularly around field campaigns and sponsor reporting deadlines. The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Responsibilities Include 45% - Radio Source Localization & Path Planning Research Lead development of algorithms and software development for real-time radio-frequency (RF) source localization from an aerial platform. Develop and evaluate path-planning strategies that optimize UAV positioning to improve localization accuracy and efficiency. Investigate RF propagation modeling approaches, including terrain-aware and simplified models, to characterize tradeoffs between prediction accuracy and computational cost in complex terrain. Contribute to the ongoing evolution of the project's research approach as findings develop, including potential extensions to additional operating scenarios. 25% - UAV Platform Development, Field Testing & Test Coordination Lead integration and adaptation of UAV hardware and RF-sensing payloads (hardware and software) to meet project and applicable federal hardware requirements. Plan and lead field data collection campaigns and flight tests across varied terrain to support algorithm development and validation. Coordinate test logistics and scheduling with the research team, including field-site arrangements, safety planning, and equipment readiness. Develop simulation-based and hardware-in-the-loop testing of localization and path-planning software. Collaborate with other researchers conducting related work on related topics in a team environment. 15% - Team Supervision & Mentoring Direct the day-to-day technical work of graduate student researchers supporting the project. Mentor graduate students in research methods, technical development, and professional growth. 10% - Dissemination, Reporting & Travel Prepare technical reports and milestone updates for project sponsors. Author and co-author peer-reviewed manuscripts and conference presentations. Travel to attend and present research findings at technical conferences, and travel to field sites to support testing and data collection campaigns. 5% - Other Perform other duties as assigned in support of lab and project needs. Minimum Qualifications Ph.D. in Electrical Engineering, Mechanical Engineering, Robotics, or a closely related field, completed prior to the start date. A combination of related education, experience, and training may be used as an equivalent to the above Minimum Qualifications. Preferred Qualifications Demonstrated research experience in RF signal processing, propagation modeling, source localization, or a closely related discipline such as optimization, estimation, or controls. Proficiency in Python and/or C++. Applied experience with software-defined radio (SDR) systems. Robotic path/trajectory planning or simultaneous localization and mapping (SLAM) experience. Hands-on experience with drone hardware and software, including integrating sensors and compute onto UAV flight- controller/autopilot stacks (e.g., Pixhawk, Cube, ArduPilot/PX4) and edge-compute platforms (e.g., Raspberry Pi). Field research/testing experience with UAV systems Record of peer-reviewed publications in the area of RF topic and/or robotics. Demonstrated ability to mentor and direct graduate student researchers. FAA Part 107 Remote Pilot Certificate, or willingness to obtain one shortly after hire. Knowledge, Skills, & Abilities Strong programming skills in Python and/or C++. Working knowledge of optimization, estimation, or path-planning methods, and RF propagation/signal processing principles. Ability to take initiative and complete complex, ambiguous technical tasks with minimal direct supervision. Ability to synthesize complex technical information into clear written reports, manuscripts, and presentations. Ability to safely plan and execute UAV field operations, including in remote/rugged terrain and under variable weather conditions. Ability to mentor and direct the day-to-day technical work of graduate student researchers. Compensation Salary range begins at $70,000. Annual salary commensurate with candidate's qualifications and related experience. Pre-Employment Check Northern Arizona University requires satisfactory results for the following: a criminal background investigation, an employment history verification and a degree verification (in some cases) prior to employment. You may also be required to complete a fingerprint background check. Also, as an employer in the state of Arizona, NAU is required to participate in the federal E-Verify program that assists employers with verifying new employees' right to work in the United States. This position has been identified as a safety/security sensitive position. Therefore, per AZ Revised Statute, Northern Arizona University requires satisfactory results for the following: a criminal background investigation, employment history investigation, degree verification (in some cases) and fingerprinting. If you are applying for a job that requires a CDL, you will be required to register with the Federal Motor Carrier Safety Administration Drug & Alcohol Clearinghouse and adhere to the clearinghouse requirements. Notice of Availability of the Annual Fire and Security Report Each year Northern Arizona University releases an Annual Security Report. The report is a result of a federal law known as the Clery Act. The report includes Clery reportable crime statistics for the three most recent completed calendar years and discloses procedures . click apply for full job details
Job Description Job Description Leapros Skilled Trades is actively hiring Data Center Technicians in New Albany, OH. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $20 to $30 Per Hour BOE Responsibilities: An Outside Plant (OSP) Technician installs, splices, tests, and repairs fiber optic and copper cable networks in aerial, underground, and buried environments . They are responsible for building infrastructure, performing fusion splicing, installing cabinets, and troubleshooting, often requiring 100% travel. This role demands adherence to safety standards, accurate documentation, and sometimes, emergency, after-hours work. Key Job Responsibilities Fiber Splicing & Termination: Perform mechanical and fusion splicing on single-mode and multi-mode fiber cables. Outside Plant Installation: Place, rearrange, and remove aerial, underground, and buried cable, including placing cable in conduits or on poles. Testing & Troubleshooting: Use OTDR (Optical Time-Domain Reflectometer) and Fluke testers to troubleshoot, test, and certify fiber/copper, identifying faults. Infrastructure Support: Build cable vaults, maintain manholes, and install closures. Documentation: Accurately complete required paperwork, including time sheets, material transfers, and work orders. Qualifications and Physical Requirements Experience: Typically requires experience in the structured cabling or OSP industry. Physical Strength: Ability to lift up to 50 lbs, move up to 75 lbs, and work in confined spaces. Technical Skills: Knowledge of color codes, fiber handling, and using tools like bucket trucks or splicing trailers. Flexibility: Willingness to work in various weather conditions, at heights Pay Transparency The anticipated salary range for this position is $20 to $30 Per Hour, based on relevant factors such as experience, skills, education, internal equity, and geographic location. Final compensation will be determined during the interview process by the hiring authority. Benefits Summary We offer a comprehensive benefits package that includes: Medical, dental, and vision insurance Paid Sick Time Employee assistance programs (EAP) Leapros serves a tight community of proven, skilled tradespeople. As a team member, you are treated with the respect which your value has earned you. This means competitive pay, consistent work, a safety culture that starts at the top, and safety training. We know you, your lifestyle, and your needs. We are committed to our core values and guiding ethical principles, to conducting business in a non-discriminatory manner, and to operating in strict compliance with applicable federal and state laws pertaining to Equal Employment Opportunity. This commitment enhances our ability to conduct business with the highest level of integrity, solidifying our position as the most trusted workforce solutions partner. To learn more about Leapros visit our website at .
09/24/2026
Full time
Job Description Job Description Leapros Skilled Trades is actively hiring Data Center Technicians in New Albany, OH. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $20 to $30 Per Hour BOE Responsibilities: An Outside Plant (OSP) Technician installs, splices, tests, and repairs fiber optic and copper cable networks in aerial, underground, and buried environments . They are responsible for building infrastructure, performing fusion splicing, installing cabinets, and troubleshooting, often requiring 100% travel. This role demands adherence to safety standards, accurate documentation, and sometimes, emergency, after-hours work. Key Job Responsibilities Fiber Splicing & Termination: Perform mechanical and fusion splicing on single-mode and multi-mode fiber cables. Outside Plant Installation: Place, rearrange, and remove aerial, underground, and buried cable, including placing cable in conduits or on poles. Testing & Troubleshooting: Use OTDR (Optical Time-Domain Reflectometer) and Fluke testers to troubleshoot, test, and certify fiber/copper, identifying faults. Infrastructure Support: Build cable vaults, maintain manholes, and install closures. Documentation: Accurately complete required paperwork, including time sheets, material transfers, and work orders. Qualifications and Physical Requirements Experience: Typically requires experience in the structured cabling or OSP industry. Physical Strength: Ability to lift up to 50 lbs, move up to 75 lbs, and work in confined spaces. Technical Skills: Knowledge of color codes, fiber handling, and using tools like bucket trucks or splicing trailers. Flexibility: Willingness to work in various weather conditions, at heights Pay Transparency The anticipated salary range for this position is $20 to $30 Per Hour, based on relevant factors such as experience, skills, education, internal equity, and geographic location. Final compensation will be determined during the interview process by the hiring authority. Benefits Summary We offer a comprehensive benefits package that includes: Medical, dental, and vision insurance Paid Sick Time Employee assistance programs (EAP) Leapros serves a tight community of proven, skilled tradespeople. As a team member, you are treated with the respect which your value has earned you. This means competitive pay, consistent work, a safety culture that starts at the top, and safety training. We know you, your lifestyle, and your needs. We are committed to our core values and guiding ethical principles, to conducting business in a non-discriminatory manner, and to operating in strict compliance with applicable federal and state laws pertaining to Equal Employment Opportunity. This commitment enhances our ability to conduct business with the highest level of integrity, solidifying our position as the most trusted workforce solutions partner. To learn more about Leapros visit our website at .
Job Description Job Description Leapros Skilled Trades is actively hiring Data Center Technicians in Jeffersonville, IN. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $20 to $30 Per Hour BOE Responsibilities: An Outside Plant (OSP) Technician installs, splices, tests, and repairs fiber optic and copper cable networks in aerial, underground, and buried environments . They are responsible for building infrastructure, performing fusion splicing, installing cabinets, and troubleshooting, often requiring 100% travel. This role demands adherence to safety standards, accurate documentation, and sometimes, emergency, after-hours work. Key Job Responsibilities Fiber Splicing & Termination: Perform mechanical and fusion splicing on single-mode and multi-mode fiber cables. Outside Plant Installation: Place, rearrange, and remove aerial, underground, and buried cable, including placing cable in conduits or on poles. Testing & Troubleshooting: Use OTDR (Optical Time-Domain Reflectometer) and Fluke testers to troubleshoot, test, and certify fiber/copper, identifying faults. Infrastructure Support: Build cable vaults, maintain manholes, and install closures. Documentation: Accurately complete required paperwork, including time sheets, material transfers, and work orders. Qualifications and Physical Requirements Experience: Typically requires experience in the structured cabling or OSP industry. Physical Strength: Ability to lift up to 50 lbs, move up to 75 lbs, and work in confined spaces. Technical Skills: Knowledge of color codes, fiber handling, and using tools like bucket trucks or splicing trailers. Flexibility: Willingness to work in various weather conditions, at heights Pay Transparency The anticipated salary range for this position is $20 to $30 Per Hour, based on relevant factors such as experience, skills, education, internal equity, and geographic location. Final compensation will be determined during the interview process by the hiring authority. Benefits Summary We offer a comprehensive benefits package that includes: Medical, dental, and vision insurance Paid Sick Time Employee assistance programs (EAP) Leapros serves a tight community of proven, skilled tradespeople. As a team member, you are treated with the respect which your value has earned you. This means competitive pay, consistent work, a safety culture that starts at the top, and safety training. We know you, your lifestyle, and your needs. We are committed to our core values and guiding ethical principles, to conducting business in a non-discriminatory manner, and to operating in strict compliance with applicable federal and state laws pertaining to Equal Employment Opportunity. This commitment enhances our ability to conduct business with the highest level of integrity, solidifying our position as the most trusted workforce solutions partner. To learn more about Leapros visit our website at .
09/24/2026
Full time
Job Description Job Description Leapros Skilled Trades is actively hiring Data Center Technicians in Jeffersonville, IN. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $20 to $30 Per Hour BOE Responsibilities: An Outside Plant (OSP) Technician installs, splices, tests, and repairs fiber optic and copper cable networks in aerial, underground, and buried environments . They are responsible for building infrastructure, performing fusion splicing, installing cabinets, and troubleshooting, often requiring 100% travel. This role demands adherence to safety standards, accurate documentation, and sometimes, emergency, after-hours work. Key Job Responsibilities Fiber Splicing & Termination: Perform mechanical and fusion splicing on single-mode and multi-mode fiber cables. Outside Plant Installation: Place, rearrange, and remove aerial, underground, and buried cable, including placing cable in conduits or on poles. Testing & Troubleshooting: Use OTDR (Optical Time-Domain Reflectometer) and Fluke testers to troubleshoot, test, and certify fiber/copper, identifying faults. Infrastructure Support: Build cable vaults, maintain manholes, and install closures. Documentation: Accurately complete required paperwork, including time sheets, material transfers, and work orders. Qualifications and Physical Requirements Experience: Typically requires experience in the structured cabling or OSP industry. Physical Strength: Ability to lift up to 50 lbs, move up to 75 lbs, and work in confined spaces. Technical Skills: Knowledge of color codes, fiber handling, and using tools like bucket trucks or splicing trailers. Flexibility: Willingness to work in various weather conditions, at heights Pay Transparency The anticipated salary range for this position is $20 to $30 Per Hour, based on relevant factors such as experience, skills, education, internal equity, and geographic location. Final compensation will be determined during the interview process by the hiring authority. Benefits Summary We offer a comprehensive benefits package that includes: Medical, dental, and vision insurance Paid Sick Time Employee assistance programs (EAP) Leapros serves a tight community of proven, skilled tradespeople. As a team member, you are treated with the respect which your value has earned you. This means competitive pay, consistent work, a safety culture that starts at the top, and safety training. We know you, your lifestyle, and your needs. We are committed to our core values and guiding ethical principles, to conducting business in a non-discriminatory manner, and to operating in strict compliance with applicable federal and state laws pertaining to Equal Employment Opportunity. This commitment enhances our ability to conduct business with the highest level of integrity, solidifying our position as the most trusted workforce solutions partner. To learn more about Leapros visit our website at .