195 jobs found

Job Description Job Description Job Summary: DT Professional Services is looking for a Satellite Communications Technician to support the Naval Surface Warfare Center (NSWC) in Corona, CA. The ideal candidate will work independently or alongside Ku Band engineers and Information Systems Technicians to provide systems technical support for hardware acquisition, configuration, testing, and implementation of state-of-the-art antenna, RF, digital, and micro-electronic technologies. Additionally, you support systems integration and testing, data processing and data management, and IP based network architecture, design, and performance analysis. This role is for an early career engineering technician with an active DoD Secret Clearance and requires an estimated 50%+ travel per year (travel locations include Navy ships in the US). Responsibilities: Install, operate, maintain and repair strategic satellite communications terminals and antennas. Install, configure, operate, align, conduct performance testing, and perform unit and direct support maintenance on satellite communications equipment and associated devices. Conduct stressed and unstressed network operations. Perform quality control tests on circuits, trunk groups, systems, and ancillary equipment. Install, operate, and maintain communication security devices. Operate and perform maintenance and services on Ku Satellite communications equipment. Provide technical assistance in the operation and maintenance of satellite communication systems. Perform complex and multifaceted tasks associated with stressed and unstressed network operations. Perform alignment, control functions, and direct support maintenance on assigned communications equipment. Ensure backup equipment, spares, and repair parts are available to sustain system operations. Compile system and network statistics for reports. Other duties as assigned. Minimum Requirements: Active DoD Secret clearance. High school diploma or GED. Basic computer and electronics skills. Minimum 1 year of networking experience. CompTIA Security+ or CASP certification, or ability to obtain within 60 days of hire. Ability to travel 50%+ annually, including travel to U.S. Navy ships. Knowledge of or experience with Ku/X/C/Ka-band satellite communications systems. Formal training and experience installing, operating, troubleshooting, and repairing RF systems. Ability to interpret technical drawings, manuals, and schematics. Strong troubleshooting and problem-solving skills in varied environments. Strong customer service, interpersonal, and communication skills, with the ability to effectively communicate technical issues and solutions to customers, DoD sponsors, vendors, and technical teams. Ability to work independently and collaboratively, take direction, and interact effectively across organizational levels. Ability to manage multiple priorities, adapt quickly to changing requirements, and perform effectively under pressure. Ability to climb, balance, stoop, kneel, sit, and lift up to 80 lbs. Capability to communicate effectively in English, both verbally and in writing Preferred Qualifications: Knowledge of network design, voice, and data communications. Proficiency with Microsoft Office. Training or experience with Windows Server 2016 and/or Windows 10. Experience configuring RF equipment, including satellite modems, spectrum analyzers, BUCs, FSK modems, antenna control units, LNBs, band-pass filters, and GPS antennas. Experience configuring networking equipment, including routers, switches, and PCs. Academic and/or work experience should include exposure to satellite communication systems, RF and digital hardware design, baseband and digital signal processing, waveform design, signal detection and estimation, and synchronization theory. Knowledge of fiber optic, Cat 5, and serial cable termination. Knowledge of RADHAZ requirements and calculations. Knowledge of HERO/HERP testing and analysis. Knowledge of Earth Station support and encryption devices. Knowledge of Cisco devices and network analysis tools such as Wireshark. The compensation for this position: $33.00 hourly. The range listed represents the company's good-faith estimate of base compensation for this position at the time of posting. This range reflects what we reasonably expect to pay for the role and may vary based on factors including, but not limited to, geographic location, experience, skills, qualifications, and internal equity. In addition to base salary, this position may be eligible for other forms of compensation, including incentive-based bonuses or commissions, as applicable. More about DT Professional Services: We're looking for driven individuals to contribute to our talented & innovative team! At DT Professional Services, we offer insurance benefits that include medical, dental, and vision coverage, life insurance, long & short-term disability, 401(k) retirement plans (with employer match), tuition & certificate reimbursement, along with paid time off (vacation/sick/holidays). We are happy to to offer growth opportunities for you to grow in your career - your success is our success! DT Professional Services is an SBA 8(a) and HUBZone certified Small Business; highly experienced in building award-winning custom software solutions. Established in 2013, we bring over a decade of experience delivering technology services and solutions that specialize in web & custom application development, project & program management, mobile & cloud computing services. Our Mission is to provide cutting-edge, customer-oriented technology solutions that maximize value, drive engagement, and empower your business. We do this by employing talented & driven individuals who share the same goals and excitement for the work we do. DT Professional Services believes in fostering collaboration, career growth and building lasting relationships with our employees. Powered by JazzHR hUvjES4GC2

Job Description Job Description Description: Who We Are Our purpose at CloudHQ is to provide flexible, efficient and resilient data center solutions to businesses of all sizes. Our growing organization was founded by the pioneer of data center REITs. CloudHQ has state-of-the-art data center sites located on two Northern Virginia campuses, as well as London, Frankfurt, Paris, and São Paulo, and we anticipate exponential growth over the next several years both in the US and abroad. What The Role Entails Based in Ashburn, Virginia, the Telecom Infrastructure Technician / Inspector at CloudHQ performs and verifies fiber-optic installation, repair, testing, labeling, and construction activities. The role provides field-level quality assurance, documents actual conditions, identifies nonconforming work, and supports safe, reliable turnover of telecom infrastructure. What You Will Get to Do Install, route, dress, secure, label, terminate, splice, and repair fiber-optic cables and associated pathway or support components within the role's authorization and training. Inspect underground, aerial, building, and data center telecom construction against approved drawings, scopes, specifications, permits, and quality requirements. Observe conduit, duct, handhole, manhole, pathway, cable placement, bend radius, pulling tension, grounding or bonding interfaces, firestopping, labeling, and restoration activities as applicable. Perform or witness continuity, polarity, optical loss, power-meter, and reflectometry testing in accordance with approved test plans and equipment procedures. Document daily progress, installed quantities, test results, site conditions, photos, redlines, deficiencies, and corrective actions. Identify damaged facilities, unsafe conditions, design conflicts, quality issues, and scope deviations; stop or escalate work when required by site rules or authority level. Coordinate field activities with project managers, engineers, contractors, site operations, security, safety, and utility representatives. Validate punch-list completion and contribute to as-built drawings, splice records, cable schedules, and closeout packages. Maintain tools and test equipment, track calibration status where applicable, and follow material-handling and housekeeping expectations. Use required personal protective equipment and comply with site safety, access, security, environmental, and work-control procedures. Success Measures Work is completed safely, correctly, and in accordance with approved documents and instructions. Inspection findings are timely, objective, traceable, and supported by clear records. Deficiencies are identified early and tracked through verified correction. Test records, redlines, photos, and closeout documentation are complete and accurate. Requirements: What you Bring to the Role 3+ years of technical infrastructure management experience High school diploma or equivalent; technical school, apprenticeship, military, or industry training is beneficial. Hands-on experience with fiber-optic installation, repair, testing, construction inspection, or related telecom field work. Ability to read route plans, construction drawings, cable schedules, splice diagrams, labels, and work packages. Familiarity with fiber handling, cleaning, connector inspection, cable placement, pathway systems, and common field test equipment. Ability to create accurate field notes, photo records, redlines, deficiency reports, and test documentation. Valid driver's licenses where required for assigned travel and site access. Our Ideal Candidate Will Also Possess FOA CFOT/CFOS, BICSI Installer or Technician, OSHA construction training, or comparable credentials. Experience in outside-plant construction, utility coordination, data centers, or mission-critical facilities. Experience with fusion splicing, optical time-domain reflectometry, optical loss testing, and digital inspection or punch-list tools. Knowledge of GIS, mobile field-data collection, or fiber asset-management systems. What We Offer CloudHQ's people and culture are the most enriching aspects that make us a great place to work. We are strengthened by industry experts who bring extensive knowledge, skill, and experience; leaders who bring vision, innovation and commitment to our people; and an expanding team of individuals who believe in that vision and bring their best to support their customers and team. Our U.S. employees enjoy competitive compensation and rewarding incentives, comprehensive benefits (medical, dental, vision, life insurance, disability), 401(k) with match, 12 paid holidays, generous PTO, development opportunities, and the ability to closely impact and contribute to the growth of an exceptional organization. Equal Employment Opportunity CloudHQ is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, age, national origin, disability, sexual orientation, gender identity or expression, marital status, genetic information, protected veteran status, or other legally protected status.

Job Description Job Description Job Title: Telecommunications Technician Duration: 3 Months Pay Rate: $36/Hr - $44/hr Location: Indianapolis, Indiana, United States, Columbus, Ohio Metropolitan Area What You'll Do: Facilitate employee training and onboarding using approved materials. Deliver technical instruction including lecture, hands on activities, labs, and various assessments. Provide remediation and support for students to ensure learning outcomes. Consult with other trainers, managers, and leadership. Track and compile collected data for accurate training reports. Document employee performance and outcomes of training. Review, test, and provide feedback on training materials. Prepare and maintain training facilities including daily cleaning and setup. Stay current on the latest data center tools and infrastructure best practices. Coordinate and monitor enrollment, schedules, and equipment. Develop and coordinate training schedules. Assess training needs through surveys and interviews. Support the conceptualization and development of new training materials. Communicate training needs and online resources as appropriate. Coach and develop Associate Trainers. Travel as needed. What You'll Need: Must have 6-9 years field industry experience of installation of structured cabling - preferably fiber. Telecommunication Industry Certifications, preferably BICSI. Proficient computer skills, Microsoft Office Suite (Word, PowerPoint, Outlook, and Excel). Strong interpersonal skills and communication with all levels of management. Expert organizational skills with an advanced inquisitive mindset. Able to multitask, prioritize, and manage time efficiently. Excellent verbal and written communication skills. Able to analyze problems and strategize for better solutions. Professional appearance and demeanor. About Us: Founded in 2009, IntelliPro is a global leader in talent acquisition and HR solutions. Our commitment to delivering unparalleled service to clients, fostering employee growth, and building enduring partnerships sets us apart. We continue leading global talent solutions with a dynamic presence in over 160 countries, including the USA, China, Canada, Singapore, Japan, Philippines, UK, India, Netherlands, and the EU. IntelliPro, a global leader connecting individuals with rewarding employment opportunities, is dedicated to understanding your career aspirations. As an Equal Opportunity Employer, IntelliPro values diversity and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected group status. Moreover, our Inclusivity Commitment emphasizes embracing candidates of all abilities and ensures that our hiring and interview processes accommodate the needs of all applicants. Learn more about our commitment to diversity and inclusivity at . Compensation: The pay offered to a successful candidate will be determined by various factors, including education, work experience, location, job responsibilities, certifications, and more. Additionally, IntelliPro provides a comprehensive benefits package, all subject to eligibility. Powered by JazzHR VNLxoXm9YR

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description Hands-on problem solver needed at CKC Data Solutions! Our Springfield, MO team is hiring an experienced BICSI Telecommunications Cabling Technician to install and maintain commercial and industrial structured systems. We're offering a competitive, experience-based salary as well as full-time benefits and perks like travel opportunities, professional development and training, and opportunities for growth within the company. We're looking for someone who is: Self-motivated to get the job done right the first time Accountable for results Attentive to detail and skilled with problem-solving Open to learning and following our company's methods and standards If we just described you, keep reading! BICSI TELECOMMUNICATIONS CABLING TECHNICIAN QUALIFICATIONS Current BICSI certification, preferably technician level or higher Proven structured cabling installation experience and proficiency with testing and installation equipment Thorough understanding of telecommunications infrastructure and standards Ability to accurately read and follow construction drawings and technical specifications Ability to complete high-quality work independently, with a team, and with minimal supervision Physical ability to lift 50 lbs and work in various environments/conditions (construction sites, data centers, on ladders, in confined spaces, etc.) Valid driver's license and willingness to travel regularly, including some overnight travel as needed WHAT THIS ROLE LOOKS LIKE As our BICSI Telecommunications Cabling Technician, you'll spend your time traveling to assigned job sites to service and install commercial and industrial structured cabling systems. We'll teach you the "CKC way

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description Telecommunications Technician - Service Company Overview With over 19 years of experience, Hays Electrical Services is a nationally recognized electrical contractor delivering high-quality, safe, and reliable electrical solutions across commercial, industrial, and specialty markets. Licensed in multiple states and trusted by leading general contractors, Hays is built on a foundation of safety, excellence, drive, communication, and client focus. Our mission is simple: to make ourselves indispensable to our customers. We achieve this by investing in our people, continuously improving our processes, and delivering results that set the standard in the electrical contracting industry. Position Summary The Telecommunications Service Technician performs MAC (moves, adds, and changes) work, troubleshooting, repair, and small-project cabling support for end-user and owner accounts under Division 27 scopes - copper and fiber horizontal and backbone cabling, patching, and telecom room reorganization. This is an independent, customer-facing role working primarily in occupied facilities. The technician diagnoses and remediates cabling and connectivity issues, certifies work to BICSI/TIA standards, and supports small installations as part of the service department's scope. A core part of the role is patching new and relocated drops in coordination with the customer's IT support and bringing new IP devices live for customers who may not have on-site IT staff. Key Responsibilities Perform MAC work: add, relocate, and extend copper and fiber drops; patch and re-patch; and reconfigure racks. Troubleshoot and remediate failed links, mislabels, continuity/mapping errors, and connectivity issues. Terminate copper (jacks, patch panels, 110/blocks) and fiber (splices, connectors, cassettes); splice as needed. Test and certify repaired and new links (e.g., Fluke DSX/CertiFiber) and submit results. Support small cabling installations and telecom room reorganizations. Patch new and relocated drops at the rack in coordination with the customer's IT support. Bring new IP endpoints live after adding drops - connecting and activating desk phones, conference-room systems, cameras, wireless access points, and similar devices - for customers who may not have on-site IT staff. Respond to service calls and coordinate with end-user IT and facilities teams. Label and document per TIA-606; update as-builts and cabling records. Identify and recommend repairs and upgrades; support time-and-materials quoting. Represent the company professionally in customer-occupied environments. Manage truck stock, tools, and test equipment. Follow all company safety policies and OSHA requirements at all times. Qualifications & SkillsRequired 3+ years of structured cabling service, MAC, or installation experience. Proficiency terminating and testing both copper (Cat 6/6A) and fiber optic cabling. Working knowledge of BICSI/TIA standards, including TIA-568 and TIA-606 labeling. Experience with certification test equipment (e.g., Fluke DSX / CertiFiber) and interpreting results. Ability to work independently on small projects and service calls. Strong customer-service orientation and professional communication. Valid driver's license and clean driving record; available for on-call as needed. Ability to meet the physical requirements of the role. Preferred BICSI Installer 1, Installer 2 (Copper/Optical Fiber), or Technician certification. Fusion splicing experience. Familiarity with approved manufacturer systems (e.g., Belden, Berk-Tek/Leviton, CommScope, Panduit). Experience in data center, healthcare, or large commercial environments. OSHA 10/30 certification. Work Environment & Physical Requirements This is a field-based service role performed primarily in occupied, operational customer facilities, with frequent daily travel between multiple sites. The employee must be able to walk sites and uneven terrain; climb and work from ladders and aerial/scissor lifts; work in mechanical/electrical rooms, ceilings, and confined spaces; and stand, bend, kneel, reach, and lift up to 50 pounds regularly. The role includes participation in an on-call rotation and occasional after-hours or weekend emergency response. Work is performed with appropriate PPE, and the technician is expected to conduct themselves professionally in customer-occupied environments. Must be able to detect, determine, distinguish, inspect, assess, and adjust focus, and distinguish colors for cable and conductor identification. A valid driver's license and clean driving record are required. Management reserves the right to change this position description at any time according to business needs. Why Join Hays Electrical Services? At Hays Electrical Services, you'll join a team that values craftsmanship, accountability, and growth. As a Telecommunications Service Technician in our 5K Specialty Systems division, you'll own your accounts, solve real problems in the field, and grow your BICSI credentials with the training, tools, and support to build a long-term career. Benefits Include: Competitive pay based on experience Comprehensive health, dental, and vision insurance Generous paid time off and company holidays Opportunities for professional growth and development in a supportive, fast-paced environment Hays Electrical Services, Inc., is an Equal Opportunity Employer and does not discriminate based on any status protected by applicable law. This job description is not intended to be all-inclusive. Duties, responsibilities, and activities may change at any time with or without notice. Powered by JazzHR 04fCxinSuI

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description As Centerline expands its data center operations throughout Texas and across the United States, we are seeking experienced Data Center Fiber Splice Technicians to support the installation, testing, commissioning, and maintenance of critical fiber infrastructure. This role combines hands-on technical expertise with collaboration across construction, commissioning, and customer teams in fast-paced, mission-critical environments. The ideal candidate will have extensive experience with fiber optic splicing, testing, troubleshooting, and documentation within data center, enterprise, or telecommunications environments. Candidates should be customer-focused, safety-minded, and committed to delivering high-quality work. What You Will Do: Perform single-fiber, ribbon, and mass fusion splicing of single-mode and multi-mode fiber optic cables in data center environments. Install, terminate, test, and troubleshoot fiber optic infrastructure supporting hyperscale, enterprise, and colocation data centers. Work with fiber distribution frames (FDFs), patch panels, MPO/MTP systems, and structured cabling infrastructure. Perform advanced fiber testing and troubleshooting using OTDR, OLTS, iOLM, power meters, and fiber characterization equipment. Interpret fiber routing diagrams, rack elevations, splice schematics, and construction drawings. Prepare accurate as-built documentation, test results, labeling, and project deliverables. Support commissioning, turn-up, migration, and maintenance activities for active network environments. Identify and resolve fiber-related issues while maintaining service continuity in mission-critical facilities. Collaborate with project managers, engineers, customers, and commissioning teams to ensure successful project completion. Train and mentor junior technicians on fiber splicing techniques, testing procedures, and industry best practices. Maintain compliance with customer standards, quality requirements, and company safety programs. Participate in scheduled maintenance windows, including occasional night, weekend, and holiday work when required. What You Will Need: Minimum 2 years of experience as a Fiber Optic Splice Technician, preferably in data center, enterprise, or telecommunications environments. High School Diploma or GED required. Demonstrated experience with fusion splicing, ribbon splicing, fiber testing, and troubleshooting. Strong understanding of single-mode and multi-mode fiber optic systems. Ability to read and interpret construction drawings, fiber schematics, and technical documentation. Experience using OTDRs, power meters, light sources, iOLM platforms, and fiber certification equipment. Ability to perceive color differences for fiber identification and troubleshooting. Proficiency with basic computer applications and project documentation tools. Strong communication and teamwork skills. Valid driver's license with acceptable driving record. Ability to pass required background checks, drug screenings, and customer-specific site requirements. Ability to work in active data center environments while following strict operational and safety procedures. Nice to have: Ribbon Splicing Connectorization experience Work Environment: Repeated and frequent ability to lift, from floor to above head, 25 lbs continuously. Ability to sit, stand, climb, kneel, bend, lift, crawl, squat, reach, and utilize both hands and feet in an aerial and underground capacity. Environmental Conditions exposure is heat, cold, dust, wet, vibration, and very loud noise. Requires the ability to sit for extended periods, stand, bend, walk, communicate via telephone, computer and/or face-to-face contact, vision to monitor, and use basic office equipment such as a personal computer, copier, and fax machines regularly during the course of work. Work is performed in and out of an office environment. This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. AAP/EEO Statement: Centerline is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Who We Are At Centerline, we design, build, and maintain industry-leading critical infrastructure across North America. Our technicians, engineers, and professional staff bring unmatched expertise to each job, working as a team to deliver consistent, exceptional results. That's why Fortune 500 clients choose Centerline again and again for a wide range of projects. With demand for connectivity at an all-time high, Centerline's opportunities for growth are limitless - and so are yours. We're committed to fostering your professional advancement and supporting your career journey. We look for team members who demonstrate our core values: Safety, Teamwork, Accountability, and Reliability. Our values are key to our team's success and driving everyone to reach their full potential. As a member of our winning team, you'll receive comprehensive insurance benefits - medical, dental, and vision - plus a 401(k) plan, referral bonuses, and generous PTO. Join us today. Together, we're building a better network.

Job Description Job Description Description: Terms : Fulltime, onsite position About Chartis Federal Chartis Federal is a premier systems engineering and integration firm specializing in mission-critical IT and communications solutions for law enforcement, homeland security, and defense. As a trusted prime contractor with over $160 million in task order awards, we operate across 22 states and support essential government missions worldwide. Our commitment to excellence has fueled our year-over-year growth, earning us recognition twice as a Washington Technology FAST 50 company and securing a place on the Inc. 5000 list for five consecutive years. At Chartis Federal, our mission is clear: keeping heroes safe and connected-on the battlefield, on the border, and in our backyards. Position Overview We are seeking a TS-cleared Senior Telecommunications Technician to provide support to our customer. This role provides telecommunications systems engineering, design, deployment, and O&M support for critical communication systems. This position is expected to be 100% on site at a government facility located in Bluemont, VA. Responsibilities Provides technical contribution to plans, procedures, and checklists to ensure the operational readiness of mission equipment and personnel. Coordinates the deployment, placement, installation, integration, operation, maintenance of a large variety of wide and narrow band radio frequency systems, with their associated ancillary equipment (antenna, remote control computers, adaptive bandwidth multiplexers, modems, and fiber optic transmission systems) at strategic and tactical locations. These systems include, but are not limited to, High Frequency (HF); Line-of-Site; Satellite Communications; Ultra-High Frequency (UHF); Very High Frequency (VHF); trunking and conventional radios; and analog and digital video systems. Performs integration and evaluation of off-the-shelf and prototype radio frequency systems and sub-systems voice, data, and video telecommunications equipment and tests for compatibility with customer standard systems. Provides technical input to engineers, technicians, specialists, and non-technical government and non-government personnel at meetings or conferences concerning voice, data, and video telecommunications systems, system integration, deployment, installation, upgrade, modification, and operation. Evaluates system performance against mission requirements and recommends equipment acquisitions, modifications, and configuration changes. Prepares, reviews, refines, coordinates, and translates requirements into language that can be used in the contracting and acquisition process (decision papers, white papers, Statements of Work, acquisition and procurement budgets and contracts). Reviews and analyzes test data, makes technical judgments, and prepares decisions and recommendations concerning quality, acceptability, and need for changes and improvements. Implements approved projects and contracts, by planning the installation phase in terms of timing, Statements of Work, staff levels', test and evaluation criteria, and acceptance. Performs monitoring, testing, alignment, and fault isolation of voice, data, and video telecommunications circuits, systems, and equipment using state of the art test and diagnostic equipment and performs equipment repair to the lowest replaceable unit. Initiates and coordinates with the customer, other government agencies, and non-government personnel in the restoration of voice, data, and video telecommunications circuits. Provides input on the programs' technical areas related to national security and crisis command and control programs. Requirements: 3 - 5 years of relevant experience Bachelor of Science in Science, Information Technology, Engineering or Mathematics (preferred). Top-Secret security clearance required. The contractor must be capable of obtaining and maintaining a Top-Secret security clearance with SCI access. Knowledge of a wide range of communications concepts, principles, and practices or in-depth knowledge in a particular functional area of telecommunications (transmission media, data transfer, ground to ground radio, switching systems, or other very specific aspects of telecommunications) to accomplish work processes through the use of telecommunications devices, methods, services, and facilities. It is also used to review, analyze, and resolve difficult and complex telecommunications problems. Knowledge of electrical power and grounding requirements for telecommunications systems and associated peripheral equipment and troubleshooting interference problems associated with mobile voice, data, and video telecommunications systems. Knowledge of radio frequency communications systems, circuit requirements, systems installation criteria and standards. Knowledge of either a broad range or in-depth specialized knowledge of some or all of telecommunications operating techniques, digital and analog communications requirements, to including video, local and wide area networking, and procedures used by Federal and industry organizations. Knowledge of agency policy and practices and knowledge of sources of technical data necessary to evaluate alternative approaches for satisfying communications requirements. This knowledge is used to define, coordinate, plan, and satisfy user requirements for telecommunications equipment, systems, or services, or is used in reviewing, developing, or interpreting communications policies and procedures. Ability to provide technical input to engineers, technicians, specialist, and non-technical government and civilian personnel at meetings or conferences concerning voice, data, and video telecommunication systems, systems installation, integration, equipment upgrades, design, modification, and maintenance. Knowledge of Joint Requirements and Integration Management System documentation, such as capability analysis report, analysis of alternatives, mission needs statements, operational requirements documents, CONOPS. Knowledge of systems engineering lifecycle and associated acquisition documentation, such as Lifecycle Cost Estimates (LCCEs), Business Impact Analysis (BIA), Statements of Work, and Market Research Reports. The contractor must be able to lift weights up to 45 pounds and be physically capable of performing all tasks and duties characteristic of the position. Other work conditions: Work is primarily centered on site at a government facility in an office or a shop. It is performed around and within electronic, electrical, and mechanical equipment (high voltage and dangerous radio frequency radiation areas) and must be performed with a complete regard for safety regulations to avoid accidents or injury. The area is adequately lighted, heated, and ventilated, but space for task accomplishment is limited. Work areas during exercises or actual emergencies may be in a semi-fixed environment or at a field location operating in confined shelters, available buildings, or outside under. hazardous conditions. Strict adherence to safe work practices and compliance with governmental safety regulations and directives is mandatory. Work is primarily performed at the home duty station but relocation to alternate sites is required. Work environment may require working in confined areas and/or at primitive facilities. Travel is involved in the national capital region, the United States, and its territories. This position requires non-emergency travel up to 50%. Why Join Chartis Federal? We offer a competitive compensation and benefits package, including: Comprehensive health insurance (medical, dental, vision) Retirement plans with company contributions Professional development opportunities and career growth support A dynamic and collaborative work environment where your contributions are valued At Chartis Federal, we believe in fostering a culture of excellence, integrity, and innovation while supporting critical national security missions. Join us in shaping the future of government contracting and national security solutions. Chartis Federal is an Equal Opportunity Employer and employs qualified individuals regardless of race, religion, color, sex, national origin, age, disability, or any other classification proscribed under applicable law. We participate in E-Verify.

Job Description Job Description Martinrea is a diversified global automotive supplier, engaged in the design, development and manufacturing of metal parts, assemblies and modules, complex fluid management systems and aluminum products. We employ approximately 15,000 skilled and motivated people at manufacturing, engineering and technical centers in Canada, the United States, Mexico, Brazil, Germany, Slovakia, Spain and China. Our business strategy leverages world-class technologies, motivated and talented people, and high-quality products. We make people's lives better by: Delivering outstanding quality products and services to our customers; Providing meaningful opportunity, job satisfaction, and job security for our people; Being positive contributors to our communities; and, Providing superior long-term investment returns to our stakeholders Our strength is our people We invite you to follow your dreams and explore a challenging and rewarding career at Martinrea. Job Summary: Utilize CMM to check parts to ensure they meet GD&T and customer requirements. Required Education and Experience: High school diploma or general education degree (GED) and/or equivalent experience Excellent communication, time management, organizational, problem solving, and decision making skills Must be self-motivated, detail oriented, and able to improvise and adapt to new or unorthodox situations Must have excellent computer skills, including Microsoft Office (Word, Excel, Outlook, PowerPoint) and DataPage+ Training in PolyWorks, GD&T, PC-DMIS, Caligo, Advanced GD&T, ASQ CQT, Core Tools, and blueprint reading Must have a good knowledge of the English language Knowledge of Customer Specific Requirements Knowledge of ISO 9001/IATF 16949 Essential Functions: Perform programming of CMM Assist in auditing the quality system Attend launch quality meetings to track the introduction of new product Troubleshoot for production line if there are issues with a certain part Ensure that for each new part launch, the Advanced Product Quality Planning (APQP) and Control Plans requirements are followed Source and track check fixture builds Interprets GD&T for CMM data fits Utilize CMM to check parts to ensure they meet GD&T and customer requirements Transfer of CMM data to PC-DMIS, Caligo, PiWeb, and/or DataPage+ Report data to engineers for review and analysis Re-evaluate parts following engineering adjustments Provide support to FARO Arm Technicians as necessary Abide by all Company polices including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the Martinrea Employee Handbook Language Skills: Ability to read and interpret documents such as safety rules, operating, and maintenance instructions and procedures manuals. Ability to write routine reports and correspondence. Ability to speak effectively before customers or employees of the organization. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of planes and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Work Environment: 80% CMM Lab, 20% Plant Floor (PPE Required) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to hear, sit, stand, talk, and use hands to finger, handle, or feel. The employee is frequently required to crouch or kneel, pull or push, reach, and lift up to 25 pounds. The employee is occasionally required to drive/travel, walk, and lift up to 50 pounds. Health and Safety: Must work in accordance with Health and Safety regulations, Company and plant rules, policies and procedures Must use or wear Personal Protective Equipment and certain clothing as required by the Company Other Duties: This job description is not designed to contain a comprehensive list of duties and responsibilities required for this job. Duties and responsibilities may change at any time with or without notice Disclaimer: This job description does not constitute a contract of employment. The Company may exercise its employment at will right at any time

Job Description Job Description Description: We are open to candidates located all throughout Virginia and Northeast North Carolina - looking for 2 or 3 candidates now and another 2 or 3 in the next 6 to 12 months as workload increases. Instrumentation & Controls Quality Assurance/Quality Controls Specialist Role and Responsibilities: Survey and audit Instrument and Control sensors and devices in a construction environment. Diagnose and repair complex control system malfunctions requiring extensive knowledge of a variety of electronic or digital control systems. Troubleshoot and repair control hardware, including controllers, relays, measurement devices, actuators, etc. Review operating equipment data for efficiency improvements and have the ability to communicate the data professionally to a group. Review quality control of hardware installation for new construction and retrofits. Provide controls audit scope and review processes for improvement. Provide technical controls training and support to all data center operations staff. Collaborate with the global automation and optimization team to implement initiatives at the data center. Communicate all issues and upcoming audit work with construction contractors. Other duties as required to support the operation of customer data centers. Sixty percent or more of travel is required. Requirements: Minimum Qualifications: 3+ years of controls experience in central plants, air handling units, and evaporative cooling/humidification systems sensor and instrumentation. Working knowledge of critical environments' mechanical, electrical, and life safety systems associated with critical environments. Experience interpreting and auditing blueprints/CAD drawings and control diagrams. Communication and organizational skills. Preferred Qualifications: Experience in data centers or other critical environments is a plus. AS/BS degree in engineering/technical studies, military technical school, or equivalent work experience is a plus. DDC/PLC experience. Experience with common software programming languages: Python, PHP, SQL. Experience beyond field technician level - project management, project engineering, and operations management. Safety It is SCI's policy to require safe operations and practices from all employees and to ensure a safe working environment. Approved Class B hard hat in required areas and locations Non-conductive PPE in required areas and locations Steel-toed shoes Insulated and protector gloves (job task-specific) Eye protection Hearing protection protective clothing (job task-specific) Environment Possible exposure to hot and cold climates Occasionally may have to work in dirty environments Able to work in confined spaces and at heights Travel Travel is primarily out of the area, overnight, and global (at least 60% of the time). Physical Requirements Ability to lift, carry, and transport equipment weighing up to 50 lbs. Bending/squatting/kneeling/stooping/crouching/walking 8 or more hours daily. Able to work in multiple environments, such as office, industrial, or shipboard locations in cold, hot, or humid conditions, around moving equipment with the potential for producing high noise levels. Must be able to work at heights and in confined spaces with appropriate PPE Must be able to pass a pre-employment drug screening, background check, and basic skills knowledge tests. Must have or be able to obtain a passport. Must have a valid driver's license and reliable transportation. Must be available to travel 60% or more and willing to work overtime, weekends, and holidays if necessary to meet project commitments. AAP/EEO Statement Standard Calibrations, Inc. is committed to equal employment opportunity. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. $32.00 to $38.00 per hour, DOE. Regional wages will be taken into consideration.

Job Description Job Description Description: Title: Test Cell Technician - Level 3 Reports To: Test Supervisor Department: Powertrain Testing FLSA Status: Non-Exempt (Hourly) Location: Iowa / Michigan (Detroit Test Center) Position Summary The Test Cell Technician - Level 3 is responsible for the setup, operation, and maintenance of engine and vehicle test cells. This role performs advanced testing activities with minimal supervision and supports complex test programs, including engine preparation, dynamometer operation, fabrication of test fixtures, and troubleshooting. The position requires a high level of technical competency, the ability to manage multiple tests simultaneously, and frequent interaction with customer engineers. Essential Duties and Responsibilities • Operate and maintain engine and vehicle test benches, including associated instrumentation and equipment • Set up production and prototype engines, vehicles, and test systems • Execute and support complex testing activities with minimal assistance • Organize and manage test-related equipment, data, and documentation • Communicate regularly with customer engineers regarding test status and results • Manage and maintain multiple test programs simultaneously • Develop and execute automated test sequences using test cell software • Support facility and equipment issues affecting test operations • Utilize downtime to support organizational initiatives (e.g., continuous improvement, 5S, safety) • Perform all work in accordance with company SOPs and ISO procedures • Follow all safety requirements, including proper use of PPE, tools, and equipment • Perform routine maintenance checks on assigned test systems • Maintain a clean and organized work environment (housekeeping) • Report issues, failures, or abnormalities to supervision in a timely manner • Attend meetings and training sessions as required • Perform additional duties as assigned Supervisory Responsibilities This position does not have direct supervisory responsibilities. May provide informal guidance and training to Level 1 and Level 2 Technicians. Required Education and Experience • High school diploma or equivalent required; Associate degree in automotive technology, mechanical technology, or a related technical field preferred • Minimum 5 years of hands-on experience in engine testing, dynamometer operation, or a comparable technical environment, including at least 2 years at a Level 2 (or equivalent) scope • Valid driver's license required; ability to operate vehicles for test purposes Preferred Qualifications • Powered industrial truck (forklift) certification per OSHA 29 CFR 1910.178 • Aerial/scissor lift certification • ASE certification or equivalent • Prior experience in an ISO-certified testing environment Required Competencies • Strong analytical problem-solving skills • Effective planning, organization, and time management • Strong written and verbal communication skills • Ability to work independently and within a team environment • Ability to follow and execute written and verbal instructions accurately • Commitment to company mission, values, safety, and quality standards Technical Skills and Knowledge • Strong understanding of internal combustion engine (ICE) operation, testing, and repair • Ability to operate dynamometer test cells • Proficiency with electronic diagnostic and measurement equipment, including: ? Oscilloscopes, multimeters, and current probes ? Signal generators, frequency counters, and spectrum analyzers • Understanding of mechanical measurement devices (temperature, pressure, flow, etc.) • Ability to wire electrical systems including sensors, actuators, controls, VFDs, and motors • Ability to read and interpret schematics, wiring diagrams, and technical documentation • Proficiency with machine tools (drill press, band saw, sander, etc.) • Proficiency with hand tools used in engine maintenance • Proficiency in welding and fabrication • Working knowledge of computer systems and software, including: ? Microsoft Word, Excel, and email ? Test cell control software ? Combustion measurement systems (e.g., Cyflex), engine communication software, and file transfer tools (e.g., FileZilla) • Ability to safely operate shop and facility equipment (forklift, boom lift, scissor lift, telehandler, etc.); Excel provides task-specific training and certification where required Safety-Sensitive Designation This position is designated as safety-sensitive due to the operation of heavy equipment, engine and vehicle test systems, and exposure to high-energy mechanical and electrical systems. The position is subject to Excel Engineering's Drug and Alcohol Policy, including pre-employment and post-incident testing where permitted by applicable state law. Physical Requirements This position requires the ability to perform heavy work, including: • Lifting up to 100 lbs occasionally • Lifting up to 50 lbs frequently • Lifting up to 20 lbs constantly Physical activities include, but are not limited to, climbing, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, and repetitive motion. Visual acuity requirements include close visual attention for data analysis, inspection, and operation of equipment and measurement devices. Work Environment Work is performed in both indoor and outdoor environments and may include exposure to: • High noise levels • Moving mechanical equipment and vehicles • Electrical systems and elevated work areas • Heat, fumes, and chemicals Use of appropriate personal protective equipment (PPE) is required at all times. Travel Requirements Travel requirements vary based on project needs and may include occasional overnight travel (estimated less than 10%). Compliance Employees are expected to comply with all company policies, procedures, and applicable federal, state, and local regulations. Equal Employment Opportunity Excel Testing and Engineering LLC (dba Excel Engineering) is an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or any other characteristic protected by applicable federal, state, or local law. Reasonable Accommodation Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this position. If accommodation is needed to apply for or perform this role, please contact Human Resources. Disclaimer This job description describes the general nature and level of work being performed by employees assigned to this classification. It is not intended to be an exhaustive list of all responsibilities, duties, and skills required. Duties and responsibilities may change at any time with or without notice. Requirements:

Job Description Job Description United CNC Machining is a precision manufacturing company specializing in mission-critical components for the aerospace and defense industries. Utilizing advanced CNC technology within a state-of-the-art, climate-controlled facility, we are committed to delivering exceptional quality, precision, and operational excellence. At United CNC, we believe our people are the foundation of our success. We foster a collaborative, team-oriented environment focused on continuous improvement, innovation, and accountability. If you are passionate about manufacturing, quality, and making an impact in a high-performance environment, we encourage you to apply. Don't settle for ordinary when extraordinary is within reach. About the Role The CMM Programmer is responsible for developing, validating, and maintaining Coordinate Measuring Machine (CMM) inspection programs using PC-DMIS to support our low-volume, high-mix production environment. This role goes beyond running existing programs, it requires building new inspection programs from blueprints, CAD models, and GD&T requirements, then optimizing them for accuracy and cycle time. The ideal candidate is highly proficient in PC-DMIS programming, comfortable working from complex engineering drawings, and able to translate part tolerances into efficient, repeatable inspection routines. What You'll Do Develop new CMM inspection programs in PC-DMIS from blueprints, CAD models, and engineering specifications Program and optimize inspection routines for precision-machined CNC components across a wide variety of low-volume, high-mix parts Read and interpret blueprints, engineering drawings, and GD&T callouts to define accurate inspection strategies Validate and debug new and existing PC-DMIS programs to ensure measurement accuracy and repeatability Perform first-article inspections (FAI), in-process checks, and final inspections as required Identify, document, and communicate nonconformances to Quality and Production teams Maintain accurate inspection records and program documentation in compliance with AS9100D/ISO 9001 requirements Perform routine maintenance and calibration checks on CMM equipment Train and support CMM Technicians on running and adapting programs Collaborate with CNC machinists, engineers, and programmers to troubleshoot fit, form, and function issues Continuously improve inspection processes to reduce cycle time without compromising accuracy Other duties as assigned What You Bring Associate degree or technical certification in Quality, Metrology, or Manufacturing Technology (or equivalent hands on experience) Advanced proficiency in PC-DMIS programming required Experience within aerospace or defense manufacturing environments Strong understanding of Geometric Dimensioning and Tolerancing (GD&T) Experience programming inspections for complex machined components Knowledge of manual inspection techniques Ability to read and interpret blueprint drawings and work with CAD models Experience with Romer Arm or other portable measurement equipment Must be able to obtain/maintain compliance with ITAR requirements (U.S. Person status required) Physical Requirements Ability to work in a sitting position for extended periods (desk, driving, and/or travel) in an office/industrial environment Manual dexterity to perform data entry functions Ability to bend, pull, stoop, and reach to perform job functions Ability to lift 25 to 35 pounds May be exposed to moving machinery, sharp metal chips, coolants, industrial chemicals, noise, and heavy materials Cognitive and mental capacity to perform essential job functions Ability to communicate effectively, orally and in writing Visual acuity to read documents, computer screens, and files Ability to hear in person and via phone Why United CNC Competitive pay reflecting real precision skills 100% employer-paid medical, dental, vision, and life insurance Paid holidays and vacation Flexible start time (6:00 AM - 8:00 AM) Climate-controlled facility On-site fitness center Tobacco and vape-free workplace Privately owned, family run culture AS9100D ISO 9001 ITAR CMMC 2.0 certified facility United CNC Machining is an Equal Opportunity Employer Apply today

Job Description Job Description Overview Circet USA is a leading provider of telecommunications and data center infrastructure services in North America, and we're looking for talented professionals to join our team. We deliver comprehensive engineering, construction, and network solutions that support the evolving connectivity and infrastructure needs of our customers. With nearly 50 years of industry experience, we partner with major telecom providers, cloud service providers, general contractors, data center operators, and utilities to design and deliver customized solutions that solve complex challenges. At Circet USA, you'll have the opportunity to make an impact, contribute to critical infrastructure projects, and help shape the future of connectivity. If you're passionate about innovation and thrive in a dynamic environment, we'd love to hear from you. Responsibilities SUMMARY As part of the division's portfolio, this position provides Engineering, Furnish and Installation services to our customers within the Central Office, Data Center, Mobile Telephone Switching Office and Cell Site environments. The purpose of this position is to support Commissioning, Integration and Maintenance service deployments for KGPCo customers. ESSENTIAL DUTIES & RESPONSIBILITIES include the following; other duties may be assigned: Loads software, determines initial network parameters and commissions equipment by testing and validating functionality. Supports customer activation of new circuits by testing connections to other pieces of equipment and integrating/mapping circuits on the network. Performs preventive or reactive maintenance of network equipment. Uses test equipment such as: STT, MTT, JDSU and Fiber Optic Power meters to perform circuit testing such as, DS-1 / 3's; OC-3 to 192; GIG-E; Fast Ethernet. Performs the Long Haul Integration as needed. Sonet, DWDM and ROADM knowledge required. Experience with Cisco, Ciena, Fujitsu, Tellabs preferred. Assist Installation in completing related projects C&IS when necessary to meet customer expectations. Learn new equipment software and interfaces to help expand business opportunities. Acts as a customer contact. Interface with customers and local supervisors to clarify project status Qualifications QUALIFICATION REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 6+ years working field knowledge of SONET/DWDM based systems. Experience commissioning and Integrating optical transport equipment such as Cisco 15454, Adtran 6100, Lucent DMX, Ciena 4200 & 6500, or Tellabs 7100 TP76300 Standards Knowledge Review Method of Procedure (MOP) with customer prior to start of project. Strong written and verbal communication skills. Strong computer skills; MS Office and database experience a plus. Must be adaptable to changing environments. Must be willing to travel extensively EDUCATION and/or EXPERIENCE Associate Degree in an appropriate technology desirable PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law. Pay Range in the United States: $26 - $39 based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance

Job Description Job Description Job Description: Data Center Technician Position: Data Center Technician Company: The Archetype Strategy Pay: 22-28 (based on experience) Overview: The Archetype Strategy is seeking a detail-oriented and skilled Data Center Technician to join our team. In this role, you will be responsible for the critical infrastructure setup within data centers, including installing data cabinets, supporting pathways such as basket trays, and running pre-connectorized fiber. You will play a key part in ensuring that our data centers operate efficiently, reliably, and securely. Key Responsibilities: Data Cabinet Installation : Install and align data cabinets and racks according to technical specifications and project requirements. Pathway Support Setup : Design and install pathway support systems, such as basket trays and cable management solutions, ensuring optimal organization and efficiency. Fiber Optic Installation : Run, terminate, and secure pre-connectorized fiber cables, ensuring accuracy and reliability in data transmission. System Integration : Collaborate with engineering teams to ensure seamless integration of infrastructure with existing systems. Quality Assurance : Conduct testing and inspections to ensure installations meet industry standards and company guidelines. Documentation : Maintain detailed records of installations, configurations, and modifications within the data center. Safety Adherence : Comply with all safety protocols and regulations, maintaining a safe and secure working environment. Qualifications: Required Skills and Experience: Demonstrated experience in data center installation or a related technical field. Expertise in installing data cabinets , rack systems , and supporting infrastructure such as basket trays . Hands-on experience with pre-connectorized fiber cable installation and management. Familiarity with data center standards such as TIA/EIA-942 and BICSI guidelines. Strong ability to read and interpret technical diagrams, blueprints, and layouts. Excellent problem-solving skills and meticulous attention to detail. Preferred Skills: Relevant certifications such as BICSI Technician , RCDD , or Fiber Optic Technician . Experience working within operational data centers. Knowledge of structured cabling systems and industry best practices. Physical Requirements: Capability to lift and handle equipment weighing up to 50 pounds. Ability to work in confined spaces or at heights as required. Flexibility to work extended hours or shifts based on project demands. Why Join The Archetype Strategy? At The Archetype Strategy , we focus on delivering tailored solutions that optimize and transform operational excellence for our clients. Our team thrives on collaboration, innovation, and a commitment to excellence. Joining us means being part of a forward-thinking organization that values expertise and growth. Powered by JazzHR OhNTb5QE3y

Job Description Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: We are seeking a highly skilled and hands-on Data Center Field Operations Lead to oversee and support operations within our data center environments. This role requires deep technical expertise in diagnosing and resolving hardware and network issues, and leading a team of technicians in delivering high-quality, SLA-driven support. The ideal candidate will be proficient in using Command Line Interfaces (CLI) for diagnostics, managing escalations, and ensuring the consistent delivery of services across a range of server, storage, and network hardware platforms. KEY RESPONSIBILITIES: Directly manages technician team members at the assigned site, including regular 1:1 meetings, performance feedback, coaching, professional development, onboarding, training, and accountability. Coordinates daily support operations, including workload distribution, ticket queue oversight, staffing coverage, escalation triage, adherence to support processes, and service expectations. Approve timecards accurately and on time for error-free billing. Lead DC operations across server, storage, and network hardware platforms, ensuring timely and effective resolution of hardware failures. Perform advanced diagnostics using CLI tools (e.g., Cisco IOS, NX-OS, Linux shell) to identify and resolve system and network issues. Oversee physical hardware repair, including component-level replacements (e.g., drives, memory, NICs, PSUs, fans, motherboards). Troubleshoot Layer 1-3 network issues, including port failures, link flaps, and misconfigurations. Coordinate with OEM vendors for RMA processes, part replacements, and warranty claims. Maintain and update documentation for incident resolution, root cause analysis, and repair procedures. Manage ticket queues and ensure SLA adherence through effective prioritization and escalation. Provide technical leadership and mentorship to junior technicians, ensuring adherence to best practices and safety protocols. Collaborate with cross-functional teams to support infrastructure upgrades, migrations, and maintenance windows. Ensure compliance with MOPs and CMOPs, and contribute to their development and continuous improvement. ESSENTIAL CRITERIA: Associate degree or higher in a technical discipline or equivalent hands-on experience in data center operations or IT support. 5+ years of experience in IT support, hardware diagnostics, and repair in enterprise, hyper-scale environments. 2+ years of people management, supervisory, team lead, mentoring, or equivalent experience demonstrating increasing responsibility. (Required) Strong proficiency with CLI-based tools and environments (e.g., Cisco CLI, Linux/Unix shell, iDRAC, iLO). Demonstrated experience in troubleshooting and repairing server, storage, and network hardware. Familiarity with network protocols and tools (e.g., ping, traceroute, netstat, SNMP, syslog). Excellent problem-solving skills and ability to work under pressure in high-availability environments. Strong communication and leadership skills with a customer-focused mindset. Valid driver's license and ability to travel between data center sites as needed. DESIRABLE CRITERIA: Experience managing a technical support team in a multi-site environment. (Preferred) Industry certifications such as CompTIA Server+, Cisco CCNA, Dell EMC, or equivalent vendor-specific credentials. Experience with ticketing systems (e.g., ServiceNow, Remedy) and asset management platforms. Familiarity with scripting for automation (e.g., Bash, Python) is a plus. Experience working in a 24/7 operational environment with on-call responsibilities. PHYSICAL REQUIREMENTS: Ability to frequently exert force equivalent to lifting up to approximately 50 pounds and occasionally up to 100 pounds. Clarity of vision at 20 inches or less and more than 20 inches, and ability to adjust focus. Three-dimensional vision, ability to judge distances and spatial relationships. Ability to identify colors and give and receive information through speaking and listening skills. Regular requirements to sit, use hands and fingers, handle objects, tools, or controls; and reach with hands and arms. Frequent need to stand and walk; occasional need to climb, balance, stoop, kneel, crouch, or bend. EOS BENEFITS: At EOS IT Solutions, we are committed to supporting the well-being and success of our team. Our comprehensive benefits package includes: Health, Vision, and Dental Insurance starting the 1st of the month after your start date. Snacks, drinks, and desserts provided 10 Days of Paid Time Off (PTO) annually 12 Paid Holidays 6 Sick Days (available after 90 days of employment) 401(k) Retirement Plan with a $2,500 company match (available after 90 days of employment) The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor.

Job Description Job Description OUR COMPANY: EOS IT Solutions is a Global Technology and Logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of service are our top business priorities, along with investing in and supporting our partners and employees. We are a true International IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: We are seeking a highly skilled and hands-on Data Center Field Operations Lead to oversee and support operations within our data center environments. This role requires deep technical expertise in diagnosing and resolving hardware and network issues, and leading a team of technicians in delivering high-quality, SLA-driven support. The ideal candidate will be proficient in using Command Line Interfaces (CLI) for diagnostics, managing escalations, and ensuring the consistent delivery of services across a range of server, storage, and network hardware platforms. KEY RESPONSIBILITIES: Directly manages technician team members at the assigned site, including regular 1:1 meetings, performance feedback, coaching, professional development, onboarding, training, and accountability. Coordinates daily support operations, including workload distribution, ticket queue oversight, staffing coverage, escalation triage, adherence to support processes, and service expectations. Approve timecards accurately and on time for error-free billing. Lead DC operations across server, storage, and network hardware platforms, ensuring timely and effective resolution of hardware failures. Perform advanced diagnostics using CLI tools (e.g., Cisco IOS, NX-OS, Linux shell) to identify and resolve system and network issues. Oversee physical hardware repair, including component-level replacements (e.g., drives, memory, NICs, PSUs, fans, motherboards). Troubleshoot Layer 1-3 network issues, including port failures, link flaps, and misconfigurations. Coordinate with OEM vendors for RMA processes, part replacements, and warranty claims. Maintain and update documentation for incident resolution, root cause analysis, and repair procedures. Manage ticket queues and ensure SLA adherence through effective prioritization and escalation. Provide technical leadership and mentorship to junior technicians, ensuring adherence to best practices and safety protocols. Collaborate with cross-functional teams to support infrastructure upgrades, migrations, and maintenance windows. Ensure compliance with MOPs and CMOPs, and contribute to their development and continuous improvement. ESSENTIAL CRITERIA: Associate degree or higher in a technical discipline or equivalent hands-on experience in data center operations or IT support. 5+ years of experience in IT support, hardware diagnostics, and repair in enterprise, hyper-scale environments. 2+ years of people management, supervisory, team lead, mentoring, or equivalent experience demonstrating increasing responsibility. (Required) Strong proficiency with CLI-based tools and environments (e.g., Cisco CLI, Linux/Unix shell, iDRAC, iLO). Demonstrated experience in troubleshooting and repairing server, storage, and network hardware. Familiarity with network protocols and tools (e.g., ping, traceroute, netstat, SNMP, syslog). Excellent problem-solving skills and ability to work under pressure in high-availability environments. Strong communication and leadership skills with a customer-focused mindset. Valid driver's license and ability to travel between data center sites as needed. DESIRABLE CRITERIA: Experience managing a technical support team in a multi-site environment. (Preferred) Industry certifications such as CompTIA Server+, Cisco CCNA, Dell EMC, or equivalent vendor-specific credentials. Experience with ticketing systems (e.g., ServiceNow, Remedy) and asset management platforms. Familiarity with scripting for automation (e.g., Bash, Python) is a plus. Experience working in a 24/7 operational environment with on-call responsibilities. PHYSICAL REQUIREMENTS: Ability to frequently exert force equivalent to lifting up to approximately 50 pounds and occasionally up to 100 pounds. Clarity of vision at 20 inches or less and more than 20 inches, and ability to adjust focus. Three-dimensional vision, ability to judge distances and spatial relationships. Ability to identify colors and give and receive information through speaking and listening skills. Regular requirements to sit, use hands and fingers, handle objects, tools, or controls; and reach with hands and arms. Frequent need to stand and walk; occasional need to climb, balance, stoop, kneel, crouch, or bend. EOS BENEFITS: At EOS IT Solutions, we are committed to supporting the well-being and success of our team. Our comprehensive benefits package includes: Health, Vision, and Dental Insurance starting the 1st of the month after your start date. Snacks, drinks, and desserts provided 10 Days of Paid Time Off (PTO) annually 12 Paid Holidays 6 Sick Days (available after 90 days of employment) 401(k) Retirement Plan with a $2,500 company match (available after 90 days of employment) The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor.