170 jobs found

Job Title: IT Engineer IV Location: NOAA National Weather Service HQ, 1325 East-West Highway, Silver Spring, MD Work Schedule: On-site Work Authorization: Must be a US Citizen eligible to obtain / maintain a NOAA Public Trust AttainX is seeking an experienced IT Engineer IV to support NOAA's National Weather Service. This position supports enterprise architecture and modernization through systems planning, data flow modeling, security planning, performance and capacity management, risk assessment, testing, and integration. The individual will collaborate with Government stakeholders, developers, and programmers to improve mission-critical on-premises and cloud systems. Qualifications and Education Requirements: BS/BA engineering degree (or equivalent) in a related area as well as 10+ years of experience in the field or in a related area. Eight to Ten years of direct experience in software engineering, systems optimization, or specialized technical programming; additional relevant experience is welcome. Current AWS Certified Solutions Architect - Professional certification, or an equivalent professional-level cloud solutions architect credential approved for this position. The required certification must remain valid during employment in the role. Experience defining and executing systems engineering processes, including requirements analysis, system planning, lifecycle assessment, integration, testing, and validation. Experience developing system architecture views, data flow diagrams, technical documentation, and actionable recommendations for system improvements. Experience with performance management, capacity planning, technical risk assessment, and information security planning for complex IT environments. Experience supporting on-premise, cloud, or hybrid infrastructure, with working knowledge of AWS and/or Microsoft Azure services. Working knowledge of federal information security frameworks and secure systems engineering practices, including NIST SP 800-53 and FIPS 200. Ability to collaborate with developers, programmers, engineers, and project stakeholders and explain technical findings to technical and nontechnical audiences. Excellent analytical, problem-solving, written communication, and organizational skills; ability to deliver accurate documentation and meet project milestones. Ability to meet NOAA background investigation, badging, system access, nondisclosure, and information protection requirements. Job Duties: The IT Engineer IV supports NWS systems engineering and portfolio modernization activities. Responsibilities include: Define and execute systems engineering processes for assigned NWS portfolios, coordinating requirements and technical activities with developers, programmers, and Government stakeholders. Document and maintain current system architectures, configurations, dependencies, service workflows, data flows, and network connectivity; incorporate approved changes within required project timelines. Develop target architecture views and evaluate emerging technologies, cloud approaches, integration options, compatibility, and performance trade-offs. Perform systems planning, performance analysis, capacity planning, lifecycle benchmarking, and optimization to support reliable, scalable mission operations. Evaluate project architectures and data and communication standards; identify integration gaps, bottlenecks, and architectural inconsistencies. Identify and document technical, security, and implementation risks; support the Technical Risk Registry, mitigation recommendations, and recurring status reporting. Develop engineering process documentation, design guidelines, system models, data flow diagrams, technical white papers, and architecture assessments using required NWS templates. Prepare and execute systems and software test plans, integration assessments, validation activities, and deployment readiness reviews; document results and support independent verification and validation. Integrate security requirements into the systems lifecycle and support vulnerability assessments, remediation recommendations, and secure system authorization activities under applicable DOC and NOAA/NWS policies. Coordinate technical findings, integration needs, schedules, and corrective actions with the engineering team; provide accurate deliverables and progress updates. Support accessibility requirements for applicable information and communication technology and protect proprietary information, Controlled Unclassified Information, and Personally Identifiable Information. Support knowledge transfer and continuity by maintaining current technical documentation and communicating system dependencies and pending tasks. Non-Essential Functions: Other related duties as assigned. About Us AttainX, Inc. delivers technology solutions, software products, and professional services to Federal Government customers. Our people are central to achieving our customers' missions. We support quality, collaboration, and employee growth through teamwork and professional development. Benefits We are proud to offer competitive compensation and benefits packages, including paid vacation, medical, dental, and vision insurance, a matching 401(k) plan, tuition/training reimbursement, and long- and short-term disability coverage, subject to plan terms and eligibility. EEO Commitment: AttainX is an equal employment opportunity employer committed to a workplace free from discrimination. We provide equal opportunity to applicants and employees without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable law. Accommodations: Applicants and employees who need a reasonable accommodation for the application process or to perform essential job functions may contact Human Resources at AttainX HR. Physical Demands: This position primarily involves computer-based work, reviewing technical materials, and communicating with team members and stakeholders. Essential functions may be performed with or without reasonable accommodation. Work Environment: Work is normally performed at NOAA's National Weather Service Headquarters, generally during 8:00 a.m. to 5:00 p.m. operational hours, Monday through Friday, excluding federal holidays. Remote work for authorized tasks must comply with Department of Commerce remote access requirements. Office noise is usually moderate. Compensation details: 00 Yearly Salary PIfc25e094fc61-4766

Location: Poway, CA Job Type: Full-time (40 hours/week), Non-exempt (hourly), In-Person Department: Quality Reports To: Quality Manager About the Role: The purpose of this position is to support the Quality Departments ability to achieve its goals. This includes accurate and timely programming and inspection of parts as well as review of incoming material, work-in-process and customer shipments to achieve AMT quality and business objectives and comply with AS9100 standards. Other duties may be assigned as needed. Key Responsibilities: Load parts, fixtures, and probes; execute existing CMM programs. Write, develop, validate and debug measuring machine programs and provide the supporting documentation for CMM inspections. Communicate with all machinists, supervisors, and engineers to meet customer/shop floor needs. Troubleshoot and solve both machine issues and related problems in the measuring process. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to AMT, customer and AS9100 standards. Complete customer PPAP requirements including control plans and inspection reports. Perform incoming material inspection tasks according to AS 9100 procedures and counterfeit awareness per AS6174. Perform final inspection according to AS 9100 procedures. Perform process and manufacturing audits and follow-up with corrective actions. Cross train across multiple departments as needed. Perform data collection and communication tasks in ERP and other applications. Comply with all Advanced Machining and Tooling policies and procedures Other duties as assigned. Qualifications: 3+ years of CMM operating and 1+ years of CMM programming. Strong specific knowledge of blueprint reading, GD&T, setup, tooling and fixture techniques. Ability to create inspection reports, perform 1st article/in-process/final inspection reports. Knowledge of inspection tool usage such as Micrometers, Calipers etc. Good typing skills and ability to use software such as word, excel etc. Knowledge of how CAD models work. Demonstrated critical thinking abilities and root cause analysis. Strong attention to detail and accuracy. Proficient use of shop arithmetic and strong math skills. Awareness of general safety, and quality systems. High School Diploma or GED. Nice to Have: Bachelor's degree in mechanical engineering or related discipline. Rock skills. Specific applied knowledge of aerospace quality procedures and AS9100. Knowledge of non-destructive testing, metal finish processes, Metallurgy and heat treatment processes Working knowledge of CNC machining, tool, fixture, work-holding and die design. Ability to understand CMM reports. Total Rewards Package The hourly pay range for this position is $30 - $45 per hour (depending on experience). This is a permanent, non-exempt (hourly), full-time position. Medical Coverage Dental Coverage Vision Coverage 10 days paid vacation annually 5 days of paid sick leave annually 401K Plan with matching 12 Paid Holidays Additional Benefits: Flexible spending account Life insurance Parental leave Professional development assistance Employee Assistance Program Work Authorization/Security Clearance The company requires access to information, or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US citizens, or to other unauthorized individuals. This position is subject to a background check, drug test, and reference check. Must be a United States Citizen, or US Permanent Resident. AAP/EEO Statement Advanced Machining and Tooling LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Ability to commute/relocate to work location: Poway, CA 92064: Reliably commute or planning to relocate before starting work (Required) Why Join Us: AMT is a place full of hardworking people creating things. We are service orientated and work to always take good care of our customers and our people. It's also a place where people are given opportunities to learn and grow with the support of our hi Monday - Friday 7:00 AM - 3:30 PM PST 40 hours weekly with the potential for optional overtime Compensation details: 30-45 Hourly Wage PI5fb8042e35ba-7736

CAD/CAM Programmer (CNC Plasma) Equipment & Assembly Plant Pittsburgh, PA At Calgon Carbon, A Kuraray Company, you'll do more than program machines-you'll help manufacture equipment that supports cleaner air and cleaner water around the world. Join a global leader in environmental solutions where innovation, teamwork, and continuous improvement are part of everything we do. Whether you're an experienced CNC programmer or have a background in AutoCAD, drafting, or manufacturing and are looking to grow your career, we'd love to hear from you. Why Join Calgon Carbon? Comprehensive Benefits Medical, Dental, Vision & Prescription Coverage Health Savings Account (HSA) 401(k) with Generous Company Match Company Incentive/Bonus Programs Tuition Reimbursement Work-Life Balance Monday-Friday Schedule 7:30 AM - 4:00 PM 40-hour work week Paid Time Off starting at 3 weeks Career Growth Ongoing learning and development opportunities Stable, growing global organization Opportunities to expand your technical skills and manufacturing knowledge What You'll Do As a CAD/CAM Programmer, you'll play an important role in supporting our fabrication team by creating CNC programs and nesting layouts that maximize material utilization and keep production moving efficiently. Responsibilities include: Create CNC programs for plasma cutting equipment using AutoCAD and nesting software. Develop daily nesting plans that maximize material usage and minimize scrap. Generate CNC files for plasma cutting, plate rolling, and press brake operations. Read and interpret engineering drawings and fabrication prints. Monitor and manage drop material inventory to improve material utilization. Perform cycle counts and compare physical inventory to SAP inventory records. Collaborate with fabrication and production teams to ensure work is prioritized and machines remain productive. Support continuous improvement initiatives focused on efficiency, quality, and waste reduction. What We're Looking For Required Qualifications High School Diploma or GED. Approximately 1+ year of experience in drafting, CAD, CNC programming, manufacturing, or a related technical field. Experience using AutoCAD 2D or similar CAD software. Ability to read and interpret mechanical drawings and blueprints. Familiarity with DXF, DWG, and other engineering file formats. Strong attention to detail and organizational skills. Basic Microsoft Excel skills. Preferred Qualifications Associate degree or technical degree in Drafting, CAD, Manufacturing Technology, or a related discipline. Experience with CAD/CAM or nesting software. Experience programming CNC plasma tables, laser cutting equipment, press brakes, or similar fabrication equipment. Experience with SAP or another ERP system. Experience working in a fabrication or manufacturing environment. Why Calgon Carbon? For more than 80 years, Calgon Carbon has been an industry leader in developing innovative solutions that protect the world's air and water. Today, our products support more than 700 applications worldwide, and our employees continue to drive innovation across our global manufacturing and technology operations. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon operates 20 facilities worldwide and employs approximately 1,685 professionals. As part of the Kuraray Group, we combine global resources with a collaborative culture committed to quality, innovation, and sustainability. If you're looking for a career where your technical skills make a real impact, we'd love to hear from you. Calgon Carbon is an Equal Opportunity Employer, including disabled/veterans PI6e8e1a2c5-

Job Title: IT Engineer IV Location: NOAA National Weather Service HQ, 1325 East-West Highway, Silver Spring, MD Work Schedule: On-site Work Authorization: Must be a US Citizen eligible to obtain / maintain a NOAA Public Trust AttainX is seeking an experienced IT Engineer IV to support NOAA's National Weather Service. This position supports enterprise architecture and modernization through systems planning, data flow modeling, security planning, performance and capacity management, risk assessment, testing, and integration. The individual will collaborate with Government stakeholders, developers, and programmers to improve mission-critical on-premises and cloud systems. Qualifications and Education Requirements: BS/BA engineering degree (or equivalent) in a related area as well as 10+ years of experience in the field or in a related area. Eight to Ten years of direct experience in software engineering, systems optimization, or specialized technical programming; additional relevant experience is welcome. Current AWS Certified Solutions Architect - Professional certification, or an equivalent professional-level cloud solutions architect credential approved for this position. The required certification must remain valid during employment in the role. Experience defining and executing systems engineering processes, including requirements analysis, system planning, lifecycle assessment, integration, testing, and validation. Experience developing system architecture views, data flow diagrams, technical documentation, and actionable recommendations for system improvements. Experience with performance management, capacity planning, technical risk assessment, and information security planning for complex IT environments. Experience supporting on-premise, cloud, or hybrid infrastructure, with working knowledge of AWS and/or Microsoft Azure services. Working knowledge of federal information security frameworks and secure systems engineering practices, including NIST SP 800-53 and FIPS 200. Ability to collaborate with developers, programmers, engineers, and project stakeholders and explain technical findings to technical and nontechnical audiences. Excellent analytical, problem-solving, written communication, and organizational skills; ability to deliver accurate documentation and meet project milestones. Ability to meet NOAA background investigation, badging, system access, nondisclosure, and information protection requirements. Job Duties: The IT Engineer IV supports NWS systems engineering and portfolio modernization activities. Responsibilities include: Define and execute systems engineering processes for assigned NWS portfolios, coordinating requirements and technical activities with developers, programmers, and Government stakeholders. Document and maintain current system architectures, configurations, dependencies, service workflows, data flows, and network connectivity; incorporate approved changes within required project timelines. Develop target architecture views and evaluate emerging technologies, cloud approaches, integration options, compatibility, and performance trade-offs. Perform systems planning, performance analysis, capacity planning, lifecycle benchmarking, and optimization to support reliable, scalable mission operations. Evaluate project architectures and data and communication standards; identify integration gaps, bottlenecks, and architectural inconsistencies. Identify and document technical, security, and implementation risks; support the Technical Risk Registry, mitigation recommendations, and recurring status reporting. Develop engineering process documentation, design guidelines, system models, data flow diagrams, technical white papers, and architecture assessments using required NWS templates. Prepare and execute systems and software test plans, integration assessments, validation activities, and deployment readiness reviews; document results and support independent verification and validation. Integrate security requirements into the systems lifecycle and support vulnerability assessments, remediation recommendations, and secure system authorization activities under applicable DOC and NOAA/NWS policies. Coordinate technical findings, integration needs, schedules, and corrective actions with the engineering team; provide accurate deliverables and progress updates. Support accessibility requirements for applicable information and communication technology and protect proprietary information, Controlled Unclassified Information, and Personally Identifiable Information. Support knowledge transfer and continuity by maintaining current technical documentation and communicating system dependencies and pending tasks. Non-Essential Functions: Other related duties as assigned. About Us AttainX, Inc. delivers technology solutions, software products, and professional services to Federal Government customers. Our people are central to achieving our customers' missions. We support quality, collaboration, and employee growth through teamwork and professional development. Benefits We are proud to offer competitive compensation and benefits packages, including paid vacation, medical, dental, and vision insurance, a matching 401(k) plan, tuition/training reimbursement, and long- and short-term disability coverage, subject to plan terms and eligibility. EEO Commitment: AttainX is an equal employment opportunity employer committed to a workplace free from discrimination. We provide equal opportunity to applicants and employees without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable law. Accommodations: Applicants and employees who need a reasonable accommodation for the application process or to perform essential job functions may contact Human Resources at AttainX HR. Physical Demands: This position primarily involves computer-based work, reviewing technical materials, and communicating with team members and stakeholders. Essential functions may be performed with or without reasonable accommodation. Work Environment: Work is normally performed at NOAA's National Weather Service Headquarters, generally during 8:00 a.m. to 5:00 p.m. operational hours, Monday through Friday, excluding federal holidays. Remote work for authorized tasks must comply with Department of Commerce remote access requirements. Office noise is usually moderate. Compensation details: 00 Yearly Salary PId28bbceb5b75-4766

Description: Rosco Manufacturing is seeking an experienced Senior CNC Engineer with deep expertise in programming and optimizing CNC lathes. This role is ideal for a hands-on manufacturing professional who can develop reliable machining processes, solve complex production challenges, and help improve quality, efficiency, and throughput. Key Responsibilities Develop, test, and optimize CNC lathe programs for new and existing components. Program complex turning operations, including multi-axis and live-tool machining where applicable. Select tooling, work holding, cutting parameters, and machining strategies. Interpret engineering drawings, GD&T, specifications, and customer requirements. Lead new-part setup, prove-out, first-piece inspection, and production launch. Troubleshoot programming, tooling, setup, cycle-time, and quality issues. Improve cycle times, tool life, process capability, and overall equipment effectiveness. Create and maintain setup sheets, tooling lists, work instructions, and program documentation. Collaborate with engineering, quality, maintenance, and production teams. Mentor CNC programmers, machinists, and setup personnel. Support root-cause analysis and corrective actions for machining-related defects. Promote safe work practices and compliance with company quality standards. What Rosco Manufacturing Offers A senior-level role with meaningful ownership of CNC processes. Challenging precision-machining projects. Opportunities to lead process improvements and mentor team members. A collaborative, hands-on manufacturing environment. Competitive compensation and benefits based on experience. Requirements: Minimum five years of CNC programming and manufacturing engineering experience, with significant emphasis on CNC lathes. Advanced knowledge of turning operations, tooling, speeds and feeds, work holding, and process development. Proven ability to program CNC lathes from engineering drawings and solid models. Experience with CAD/CAM software and manual G-code programming. Strong understanding of GD&T, blueprint reading, and precision measurement. Experience troubleshooting difficult machining and production problems. Ability to independently manage projects from concept through production. Strong communication, documentation, and team leadership skills. Experience with Swiss-style, multi-axis, dual-spindle, or live-tool lathes is highly desirable. Familiarity with lean manufacturing and continuous-improvement methods is preferred. Apply Qualified candidates should submit a resume highlighting their CNC lathe programming experience, machine and control expertise, CAD/CAM proficiency, and examples of measurable process improvements. PIfee1-1212

Job Title: IT Engineer IV Location: NOAA National Weather Service HQ, 1325 East-West Highway, Silver Spring, MD Work Schedule: On-site Work Authorization: Must be a US Citizen eligible to obtain / maintain a NOAA Public Trust AttainX is seeking an experienced IT Engineer IV to support NOAA's National Weather Service. This position supports enterprise architecture and modernization through systems planning, data flow modeling, security planning, performance and capacity management, risk assessment, testing, and integration. The individual will collaborate with Government stakeholders, developers, and programmers to improve mission-critical on-premises and cloud systems. Qualifications and Education Requirements: BS/BA engineering degree (or equivalent) in a related area as well as 10+ years of experience in the field or in a related area. Eight to Ten years of direct experience in software engineering, systems optimization, or specialized technical programming; additional relevant experience is welcome. Current AWS Certified Solutions Architect - Professional certification, or an equivalent professional-level cloud solutions architect credential approved for this position. The required certification must remain valid during employment in the role. Experience defining and executing systems engineering processes, including requirements analysis, system planning, lifecycle assessment, integration, testing, and validation. Experience developing system architecture views, data flow diagrams, technical documentation, and actionable recommendations for system improvements. Experience with performance management, capacity planning, technical risk assessment, and information security planning for complex IT environments. Experience supporting on-premise, cloud, or hybrid infrastructure, with working knowledge of AWS and/or Microsoft Azure services. Working knowledge of federal information security frameworks and secure systems engineering practices, including NIST SP 800-53 and FIPS 200. Ability to collaborate with developers, programmers, engineers, and project stakeholders and explain technical findings to technical and nontechnical audiences. Excellent analytical, problem-solving, written communication, and organizational skills; ability to deliver accurate documentation and meet project milestones. Ability to meet NOAA background investigation, badging, system access, nondisclosure, and information protection requirements. Job Duties: The IT Engineer IV supports NWS systems engineering and portfolio modernization activities. Responsibilities include: Define and execute systems engineering processes for assigned NWS portfolios, coordinating requirements and technical activities with developers, programmers, and Government stakeholders. Document and maintain current system architectures, configurations, dependencies, service workflows, data flows, and network connectivity; incorporate approved changes within required project timelines. Develop target architecture views and evaluate emerging technologies, cloud approaches, integration options, compatibility, and performance trade-offs. Perform systems planning, performance analysis, capacity planning, lifecycle benchmarking, and optimization to support reliable, scalable mission operations. Evaluate project architectures and data and communication standards; identify integration gaps, bottlenecks, and architectural inconsistencies. Identify and document technical, security, and implementation risks; support the Technical Risk Registry, mitigation recommendations, and recurring status reporting. Develop engineering process documentation, design guidelines, system models, data flow diagrams, technical white papers, and architecture assessments using required NWS templates. Prepare and execute systems and software test plans, integration assessments, validation activities, and deployment readiness reviews; document results and support independent verification and validation. Integrate security requirements into the systems lifecycle and support vulnerability assessments, remediation recommendations, and secure system authorization activities under applicable DOC and NOAA/NWS policies. Coordinate technical findings, integration needs, schedules, and corrective actions with the engineering team; provide accurate deliverables and progress updates. Support accessibility requirements for applicable information and communication technology and protect proprietary information, Controlled Unclassified Information, and Personally Identifiable Information. Support knowledge transfer and continuity by maintaining current technical documentation and communicating system dependencies and pending tasks. Non-Essential Functions: Other related duties as assigned. About Us AttainX, Inc. delivers technology solutions, software products, and professional services to Federal Government customers. Our people are central to achieving our customers' missions. We support quality, collaboration, and employee growth through teamwork and professional development. Benefits We are proud to offer competitive compensation and benefits packages, including paid vacation, medical, dental, and vision insurance, a matching 401(k) plan, tuition/training reimbursement, and long- and short-term disability coverage, subject to plan terms and eligibility. EEO Commitment: AttainX is an equal employment opportunity employer committed to a workplace free from discrimination. We provide equal opportunity to applicants and employees without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable law. Accommodations: Applicants and employees who need a reasonable accommodation for the application process or to perform essential job functions may contact Human Resources at AttainX HR. Physical Demands: This position primarily involves computer-based work, reviewing technical materials, and communicating with team members and stakeholders. Essential functions may be performed with or without reasonable accommodation. Work Environment: Work is normally performed at NOAA's National Weather Service Headquarters, generally during 8:00 a.m. to 5:00 p.m. operational hours, Monday through Friday, excluding federal holidays. Remote work for authorized tasks must comply with Department of Commerce remote access requirements. Office noise is usually moderate. Compensation details: 00 Yearly Salary PId28bbceb5b75-4766

Job Description Job Description Position Summary: The Robotic Welding Programmer is responsible for programming, configuring, and optimizing robotic welding systems to produce high-quality welded products safely and efficiently. This role troubleshoots robotic welding systems and works closely with engineering, quality, and production teams to support manufacturing operations. Primary Responsibilities: Program and optimize robotic welding systems for new and existing products. Create, modify, and troubleshoot robot programs using teach pendants and offline programming software where applicable. Develop weld paths, torch angles, travel speeds, and welding parameters to ensure quality and productivity. Set up robotic welding cells for new product launches and engineering changes. Troubleshoot robot programming, welding quality, and equipment issues. Optimize cycle times while maintaining safety and product quality. Perform robot backups, software updates, and program documentation. Collaborate with engineering to design fixtures and improve manufacturability. Support preventive maintenance and equipment calibration activities. Analyze weld quality and implement corrective actions for defects. Train operators and technicians on proper robot operation and basic troubleshooting. Read and interpret engineering drawings, GD&T, weld symbols, and specifications. Support continuous improvement initiatives using Lean manufacturing principles. Ensure compliance with safety standards, company policies, and customer requirements. Perform other duties as required or assigned. Qualifications: High school diploma or GED required; associate degree or technical certification in robotics, welding, manufacturing, or a related field preferred. 3-5 years of robotic welding programming experience in a manufacturing environment. Experience with MIG (GMAW) and/or TIG (GTAW) welding processes. Experience programming one or more robotic platforms. Knowledge of robotic welding power sources. Strong understanding of robotic programming principles and motion optimization. Knowledge of welding metallurgy and welding procedures. Ability to troubleshoot robot hardware, software, sensors, and welding equipment. Ability to interpret blueprints, weld symbols, and geometric dimensioning and tolerancing (GD&T). Experience with offline programming software is preferred. Minimum Physical Requirements and Accountability: Work often involves extended periods of standing, walking, and performing repetitive or physically demanding tasks. Effective verbal communication and hearing are essential for maintaining safety, receiving instructions, and coordinating with team members in person, over radios, or through alarms. Both fine motor skills (e.g., handling small components, precision work) and gross motor skills (e.g., operating tools and heavy equipment) are critical. Visual acuity is required for reading blueprints, measuring materials, performing precision work, and maintaining situational awareness; near, far, and peripheral vision may all be needed. Must be able to work in a variety of environments, including indoor and outdoor settings, as well as dusty, loud, hot, cold, or potentially hazardous areas. Tasks may involve bending, stooping, reaching overhead or below shoulder height, crouching, kneeling, climbing ladders or ramps, and maintaining balance on uneven surfaces. Must be able to work at heights, in confined spaces, or in other challenging physical locations as required by the task. Must be able to lift, carry, push, or pull up to 50 lbs independently. Must comply with all company policies and procedures. Consistent, punctual attendance during core business hours is essential. Reliable transportation is required for commuting and occasional travel between local corporate offices and job sites during business hours. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis.

Job Description Job Description Position Summary: The Robotic Welding Programmer is responsible for programming, configuring, and optimizing robotic welding systems to produce high-quality welded products safely and efficiently. This role troubleshoots robotic welding systems and works closely with engineering, quality, and production teams to support manufacturing operations. Primary Responsibilities: Program and optimize robotic welding systems for new and existing products. Create, modify, and troubleshoot robot programs using teach pendants and offline programming software where applicable. Develop weld paths, torch angles, travel speeds, and welding parameters to ensure quality and productivity. Set up robotic welding cells for new product launches and engineering changes. Troubleshoot robot programming, welding quality, and equipment issues. Optimize cycle times while maintaining safety and product quality. Perform robot backups, software updates, and program documentation. Collaborate with engineering to design fixtures and improve manufacturability. Support preventive maintenance and equipment calibration activities. Analyze weld quality and implement corrective actions for defects. Train operators and technicians on proper robot operation and basic troubleshooting. Read and interpret engineering drawings, GD&T, weld symbols, and specifications. Support continuous improvement initiatives using Lean manufacturing principles. Ensure compliance with safety standards, company policies, and customer requirements. Perform other duties as required or assigned. Qualifications: High school diploma or GED required; associate degree or technical certification in robotics, welding, manufacturing, or a related field preferred. 3-5 years of robotic welding programming experience in a manufacturing environment. Experience with MIG (GMAW) and/or TIG (GTAW) welding processes. Experience programming one or more robotic platforms. Knowledge of robotic welding power sources. Strong understanding of robotic programming principles and motion optimization. Knowledge of welding metallurgy and welding procedures. Ability to troubleshoot robot hardware, software, sensors, and welding equipment. Ability to interpret blueprints, weld symbols, and geometric dimensioning and tolerancing (GD&T). Experience with offline programming software is preferred. Minimum Physical Requirements and Accountability: Work often involves extended periods of standing, walking, and performing repetitive or physically demanding tasks. Effective verbal communication and hearing are essential for maintaining safety, receiving instructions, and coordinating with team members in person, over radios, or through alarms. Both fine motor skills (e.g., handling small components, precision work) and gross motor skills (e.g., operating tools and heavy equipment) are critical. Visual acuity is required for reading blueprints, measuring materials, performing precision work, and maintaining situational awareness; near, far, and peripheral vision may all be needed. Must be able to work in a variety of environments, including indoor and outdoor settings, as well as dusty, loud, hot, cold, or potentially hazardous areas. Tasks may involve bending, stooping, reaching overhead or below shoulder height, crouching, kneeling, climbing ladders or ramps, and maintaining balance on uneven surfaces. Must be able to work at heights, in confined spaces, or in other challenging physical locations as required by the task. Must be able to lift, carry, push, or pull up to 50 lbs independently. Must comply with all company policies and procedures. Consistent, punctual attendance during core business hours is essential. Reliable transportation is required for commuting and occasional travel between local corporate offices and job sites during business hours. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis.

Job Description Job Description Summary The Robotic Welder & Programmer sets up, programs, operates, and maintains robotic welding cells and also performs hands-on manual welding and fabrication on the shop floor. This position develops and refines weld programs, dials in fixtures and weld parameters, and runs production parts, while welding manually on work that is not suited to automation. Performs process evaluation, develops process work instructions, balances work flow, and helps design product build fixtures with the goal of improving quality, reducing costs, and increasing throughput. Essential Duties and Responsibilities Employee must be able to perform these essential functions of the position satisfactorily and, if requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. Sets up, programs, and troubleshoots robotic welding cells using the teach pendant and/or offline programming software; creates, edits, and optimizes weld paths, sequences, and parameters (voltage, wire feed speed, travel speed, and weave). Subject Matter Expert for Robotic Welding operations. Performs hands-on manual welding and fabrication on the shop floor - MIG (GMAW), on parts not suited to the robot and to support production demand. Loads programs, dials in fixtures and part positioning, and runs first-article and production parts to confirm weld quality before and during a run. Reads and interprets blueprints, weld symbols, and work instructions; fits, tacks, and assembles weldments to specification. Diagnoses and corrects cell issues such as torch collisions, wire-feed faults, arc-start problems, and positioner or I/O errors; performs routine preventive maintenance, TCP calibration, and consumable changeover on robots and welding equipment. Grinds, finishes, and prepares parts to meet quality and cosmetic requirements. Develops and documents process work instructions, balances work flow, and designs or recommends product build fixtures to improve quality, cost, and throughput. Performs in-process inspection and verifies welds against applicable standards (e.g., AWS D1.1); maintains accurate setup and production records. Actively participates in the Company Safety Program with goal of ensuring a safe and suitable work environment for all employees and meeting the requirements mandated by the Occupational Safety and Health Standards. Applies lean tools and methods and participates in continuous improvement activities. Provides assistance to other departments, as needed. Performs all other duties as assigned. Complies with the requirements of the company's ISO 9001 Quality Management System (when required). Physical Requirements Ability to stand, climb, bend and kneel on a regular basis. Prolonged periods of standing while welding, fitting, and operating equipment, with periodic work at a computer or teach pendant. Regular manual dexterity/coordination: hand/eye movements, motor control. Regular visual effort: concentrated reading of documentation or close viewing of computer displays. Will routinely work in factory environment with exposure to noise and machinery. Able to push, pull and lift up to 50lbs. on a regular basis. Able to push, pull and lift up to 75lbs. on an occasional basis. Potential Hazards Employee may be exposed to hazardous substances including a variety of petroleum-based products, cleaning solvents, and welding fumes and gases on a regular basis. Employee may be exposed to sharp (cutting) tools, hot metal, sparks, arc flash / UV light, and high noise on a regular basis; appropriate PPE is required. Competencies necessary to perform this job Time Management - Effective time management skills to independently complete tasks with minimal disruption to company users. Organization - Ability to prioritize multiple tasks and maintain a smooth work flow. Teamwork - Ability to work closely with a variety of employees while maintaining a positive attitude. Problem Solving - Identify and resolve problems in a timely manner. Communication - Speak clearly and persuasively in positive or negative situations. Ability to ask detailed questions to comprehend requests. Safety and Security - Follow safety policies/plans created by the company; utilize tools and equipment in a safe and proper manner. Required Education/Experience/Skills High school diploma or equivalent; completion of a welding or robotics/automation program, or significant related experience in a metal fabrication and welding environment. Minimum of 2 years of production (on-the-floor) welding experience in MIG (GMAW), with the ability to read blueprints and weld symbols. Minimum of 2 to 3 years of hands-on robotic welding programming experience (e.g., FANUC, Yaskawa/Moto man, Lincoln, or Miller/Panasonic systems), including teach-pendant programming. Skilled in the use of Microsoft Office products and other data systems to include Global Shop. Ability to meet deadlines; to understand and follow written and verbal instructions. Ability to understand and follow posted work rules and procedures. Ability to prioritize, organize, solve problems, and complete tasks independently. Mechanical aptitude with strong attention to detail and weld quality. Ability to communicate effectively and work cooperatively with members of management, vendors, and other employees. Preferred Education/Experience/Skills Knowledge of Quality Systems, Lean Manufacturing techniques, weld fixture design, and offline robotic programming or simulation (e.g., FANUC ROBOGUIDE, Robotmaster). Familiarity with GD&T and in-process weld inspection. Certifications, Licensees or Registrations Required/Preferred AWS welding certification(s) preferred. Manufacturer robotic programming / operation training preferred but not required. Page Break Page Break

Job Description Job Description RnB Enterprises is looking for experienced Audio-Visual Technicians for Full time commercial and industrial work at our customers locations using our vehicles and tools to install audio visual equipment and some electric into schools, businesses, and other professional spaces. We are looking for high quality, hardworking, and reliable workers that can move at a fast pace, while still working accurately. This is a steady, indoors, no weekends job. We provide tools, shirts, and paid transportation from RnB to jobs each day. We also offer training to advance your skills and to learn new technology. Benefits and paid time off after 90 days! You must be available to work day shift AND night shift. (Hours are not the same every day and will be 8-hour shifts not double shifts. i.e.: one day you may work 7:00 - 3:00 and next might be 1:00 - 9:00) Must be flexible. Overtime is as needed. Essential Duties: Proficient with AV signal flow, equipment functionality, and programming Experience with installing, testing, and commissioning custom AV control systems Experience as an IT Support, IT Field Technician or AV Technician Passion and capacity for learning Technology skills and an ability to quickly understand new technology Read and interpret electronic schematics and architectural blueprints Test point to point cabling, functionality of systems, code for control and DSP systems - field load as necessary Support an Engineer or Programmer with minor programming changes Work with office staff to initiate return material authorizations as needed Support the Project Manager with site supervision of install team, communication of daily job site status, and completion of required job documentation as needed Knowledge of complex wiring configurations and/or signal flow for audio, video, control, network Control system programming and troubleshooting capabilities Knowledge and use of specific test equipment for required applications OSHA Card preferred Implementing and/or performing new systems and equipment installation, field service, or system repairs. Configuration, integration of audiovisual equipment such as multimedia, audiovisual, projection systems, displays, cameras, microphone, IP, and ISDN networks in support of AV equipment. Provide technical expertise involved in the integration and operation of AV equipment. Create, track, and complete a project Punchlist Read and interpret electronic schematics and architectural blueprints Come work where your expertise will contribute to creating exceptional experiences through technology! Skills: Commercial experience with audiovisual equipment, and systems required Ability to diagnose/troubleshoot/resolve service issues related to integrated AV Systems Ability to lift >50lbs Strong skills with hand tools and measuring Preferred Certifications: Atlona, Extron, Dante, Biamp, certifications AVIXA/InfoComm CTS, CTS-I Utilize prompt engineering such as AI to troubleshoot unfamiliar code (e.g., Q-SYS or Crestron scripts) or to brainstorm creative solutions when dealing with tricky installations Valid State of CT Electrical License preferred Commercial experience with audiovisual equipment, and systems required. Preference given to those with 5+ years of experience Preferred Certifications: Atlona, Extron, Dante, Biamp, other industry certifications AVIXA CTS, CTS-I Why work for RnB: We have been in business over 30 years and are a small company who value all our employees and their contributions. In addition, we give paid time off after 90 days and offer company benefits such as: vacation, holidays, partially paid health, as well as dental, Aflac, simple IRA matching after two years, pet insurance, and more!

Job Description Job Description About the Role FES is seeking a Senior DDC Engineer / Programmer with deep technical expertise in building automation and control systems. This is a hands-on leadership role that combines advanced programming, field commissioning, and project delivery with mentoring and client-facing responsibilities. You'll lead complex projects, provide technical direction to technicians, and collaborate closely with engineering, construction, and service teams to deliver reliable, high-performance control solutions. Key Responsibilities Collaborate with the Engineering Department to review and advise on control drawings and project submittals. Program, integrate, and commission DDC systems and field devices across multiple platforms. Ensure accurate operation of all building control sequences, alarms, trends, and archives. Develop and implement custom graphics for end-user interfaces. Train and mentor DDC technicians and provide system training for clients. Integrate BAS with third-party building systems (e.g., chillers, generators, lighting). Troubleshoot complex system and network issues (BACnet IP, MS/TP, LAN/WAN). Read and interpret mechanical drawings, sequences of operation, and specifications. Prepare and deliver as-built documentation and support project turnover. Support both on-site commissioning and remote diagnostics as needed. Company Description Facility Engineering Services is a growing company with business interests in HVAC mechanical service, automatic temperature controls installation, and DDC service. We are a market leader in the Baltimore/Washington metropolitan area and have involvement in projects worldwide. Company Description Facility Engineering Services is a growing company with business interests in HVAC mechanical service, automatic temperature controls installation, and DDC service. We are a market leader in the Baltimore/Washington metropolitan area and have involvement in projects worldwide.

Job Description Job Description Salary : Base pay starting at $21.00 - $25.00 per hour based on experience ($3.00 per hour shift premium if working off-shift) Shift: This opening is for a 1st or 3rd shift position, Training will take place on 1st shift . Once training is complete the employee will move to 3rd shift and receive the shift premium of $3.00/hour Summary: Write, edit, and troubleshoot programs for assigned robotic welding machinery, using computer software for programming and other department support. Ensure weldments meet Rosenboom weld specification S903DZ0001. Essential Duties and Responsibilities: Write robotic weld programs that meet the quality specifications of customers and Rosenboom while maintaining minimum weld cycle time. Inspect, measure, and/or test completed weldments and supporting materials, to ensure conformance to specifications, using measuring and testing devices. Recognize, set up, and operate hand and power tools common to the welding trade, such as gas metal arc welding and gas tungsten arc welding equipment. Productive member of his/her workgroup and adheres to all Rosenboom polices, including safety requirements/procedures especially working with robotic equipment, to ensure a safe working environment for all Rosenboom employees. Work in a production setting to facilitate the needs of Rosenboom's production goals. Maintain preventive maintenance (PM) program for all weld related equipment. Maintain a 5S program for equipment and tools in the Weld Support Department. Specific training/certification: Relative experience and/or training required Holds or has the ability to obtain hand weld and robotic welding RMT specific certifications Skills: Interpret of mechanical drawings, and blue prints Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) Requirements: minimum of 6 months welding experience The following benefits are offered: Health insurance Paid time off 401(k) Dental insurance Vision insurance Life insurance Employee assistance program And more EOE - Veteran's & Disabilities

Job Description Job Description Technique is looking for a Robot Weld Tech Lead to join our team at our Jackson, Michigan facility. This role leads day-to-day activity in the robot welding department, serving as the person in charge when the manager is unavailable. Key responsibilities include production planning and scheduling to meet the expectations of internal and external customers, troubleshooting PLC controls, training and evaluating new employees, and keeping product flowing through the department. The ideal candidate brings an advanced understanding of PLC controls and GD&T, proficiency with E2 for finding build information and process flow, and proven leadership ability - someone who leads by example, delegates effectively, and drives process improvements while following all Technique QMS processes. Responsibilities: Train and evaluate new employees - Train and evaluate new employees in the department and complete reviews. Lead by example - Set the standard for the department through your own work habits, quality, and professionalism. Serve as person in charge - Lead the department if the manager is unavailable, acting as the person in charge. Pull parts proactively - Pull parts from other departments rather than waiting for work to show up. Plan builds with Materials - Utilize and understand the customer master sheet and work with the Materials group to plan builds. Production planning and scheduling - Set a plan and work your plan to meet the expectations of internal and external customers. Drive process improvements - Identify and implement process improvements within the department. Write work instructions - Write work instructions for the department. Support HR - Support HR in all functions and documents. Multitask and delegate - Support several tasks at the same time and delegate tasks to keep product flowing in the department. Follow Technique QMS - Follow all Technique QMS requirements and their processes. Requirements: Advanced understanding of PLC controls and processes to find faults, with the ability to change out control terminal relays Advanced GD&T understanding Ability to utilize E2 to find information for builds and process flow Ability to train, evaluate, and lead employees in the department Ability to support several tasks at the same time and delegate tasks effectively About Technique, Technique is a Michigan-based precision sheet metal and welded assemblies manufacturer serving aerospace, defense, automotive, motorsports, medical, and food processing industries. We specialize in high-speed prototypes, ultra-low volume stampings, tubing, and assemblies for production and emergency-based manufacturing. Our employees enjoy a work culture that values safety, integrity, teamwork, learning opportunities, and results. Technique benefits include paid time off, health insurance, dental insurance, vision insurance, life insurance, disability insurance, health savings account (HSA), flexible spending account (FSA), 401(k), 401(k) matching, professional development, referral program, paid training, on-the-job training, employee assistance program, and tuition reimbursement. Benefits: Paid Time Off Health Insurance Dental Insurance Vision Insurance Life Insurance Disability Insurance Health Savings Account Flexible Spending Account 401(k) 401(k) Matching Professional Development Referral Program Paid Training On The Job Training Employee Assistance Program Tuition Reimbursement Technique is an equal employment opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Description Position Summary: As a CMM Programmer you will play a key role in ensuring that all parts meet exacting standards through advanced CMM programming and meticulous inspection practices. This role is ideal for someone with experience using Zeiss Calypso software, a strong understanding of GD&T, and a commitment to AS9100/ISO 9001 quality systems. Key Responsibilities: CMM Programming & Operation: Create, optimize, and run CMM programs using Zeiss Contura with Calypso to inspect components with precision. Quality Control Inspection: Perform dimensional inspections on parts and assemblies to verify compliance with engineering drawings and specifications. GD&T Interpretation: Read and interpret Geometric Dimensioning & Tolerancing (GD&T) from blueprints and CAD models. Data Collection & Reporting: Document inspection results, generate reports, and escalate any non-conformances or quality issues. Use of Precision Instruments: Operate calipers, micrometers, gauges, and other measurement tools for hands-on inspections. Quality Management Systems: Work within AS9100 and ISO 9001 frameworks to support audits, compliance, and continuous quality improvement. Troubleshooting: Investigate and resolve measurement discrepancies or CMM-related issues. Collaboration: Communicate effectively with engineering and production teams to support root cause analysis and corrective actions. Required Qualifications: Experience with CMM programming, preferably with Zeiss Calypso. Strong knowledge of GD&T principles and blueprint reading. Hands-on experience with precision measurement tools. Familiarity with AS9100 or ISO 9001 quality standards. Technical certificate or associate degree in Quality, Manufacturing, or a related field (preferred). Strong attention to detail and commitment to quality. Preferred Qualifications: Experience working in aerospace or defense manufacturing environments. Experience with CAD model integration and offline CMM programming. Company Description Delta Machine Company ,Harbor City, CA., is a leading manufacturing company committed to precision, innovation, and quality. We are currently seeking a skilled and detail-oriented CMM Programmer / Quality Control Inspector to join our Quality Assurance team. This is an exciting opportunity to contribute to a high-performance culture that values technical expertise, continuous improvement, and customer satisfaction. Company Description Delta Machine Company ,Harbor City, CA., is a leading manufacturing company committed to precision, innovation, and quality. We are currently seeking a skilled and detail-oriented CMM Programmer / Quality Control Inspector to join our Quality Assurance team. This is an exciting opportunity to contribute to a high-performance culture that values technical expertise, continuous improvement, and customer satisfaction.

Job Description Job Description ESSENTIAL FUNCTIONS: An individual in this position must be able to successfully perform the essential duties and responsibilities listed below. This list shall not be construed as the only duties that may be assigned for the position. Create, maintain, and run detailed CMM programs for in-house production parts, purchased components, and sub-contract machined parts. Prepare detailed inspection reports; provide input and direction to other inspectors, machine operators, engineering and purchasing personnel, and outside suppliers based on inspection results. Determine program requirements based on design and engineering part-specific requirements. Maintain the CMM equipment to ensure it is functioning properly, the calibration schedule is adhered to, and the software is up to date. Provide support to the Inspection Department by inspecting components, calibrating gauges, and performing other tasks as needed. QUALIFICATIONS: Education Associates degree or some technical training preferred. Experience and/or Training 3 years of related experience Knowledge of gage calibration. Ability to read and interpret drawings. Technology/Equipment Knowledge of Zeiss Calypso software preferred but not required. Familiar with the requirements of ISO9001:2015. COMPANY BENEFITS Dynex offers competitive pay and an excellent benefit package, including: Comprehensive medical plan with employer contribution Health Savings Account Dental and vision plans 401(k) retirement plan with generous company contributions Employer-paid: Group term life insurance Accidental death and dismemberment Short-term disability Training opportunities Employee Assistance Program (EAP) Long-term disability Voluntary life insurance options Paid Time Off (PTO) Up to 13 paid Holiday days, includes building shut down the week of 4th of July. Tuition Reimbursement Program Company Description Dynex/Rivett Inc. is a global leading manufacturer of high-pressure hydraulic equipment used on mobile and industrial machinery. Our pumps, valves, motors, and power units are sold worldwide through offices in Pewaukee, WI, Ashland, MA, Eaton Socon, UK, and Dubai, UAE. We offer a small-company environment that fosters teamwork and innovation. We use advanced manufacturing processes with the latest and most sophisticated CNC machines in a clean, well-lit working environment. Our people, work environment and location allow us to attract the best people to achieve our success. We welcome you to join us! Company Description Dynex/Rivett Inc. is a global leading manufacturer of high-pressure hydraulic equipment used on mobile and industrial machinery. Our pumps, valves, motors, and power units are sold worldwide through offices in Pewaukee, WI, Ashland, MA, Eaton Socon, UK, and Dubai, UAE. We offer a small-company environment that fosters teamwork and innovation. We use advanced manufacturing processes with the latest and most sophisticated CNC machines in a clean, well-lit working environment. Our people, work environment and location allow us to attract the best people to achieve our success. We welcome you to join us!

Job Description Job Description About us: We are seeking a CMM programmer to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. Responsibilities: Perform in-process and final inspection Perform first article inspections and generates reports Conduct and report internal audits and evaluations Implement and improve quality control operating procedures Identify and troubleshoot equipment problems and defects Participate in routine visual inspections Maintain a clean and safe work environment Hexagon Bridge experience using PC-DMIS Faro Arm experience other Jobs Duties as needed to support CPI and Customers Demands Qualifications: Previous work experience in quality control or other related fields Have PC-DMIS Programming Experience MUST have 3-5 years of experience with FARO arm model QUANTOM software Verisurf 2022 Experience in Aerospace Strong attention to detail Strong analytical and critical thinking skills Excellent written and verbal communication skills Ability to work in a team environment Computer literate (Outlook,Word,Excel) Schedule: Monday to Friday 7:00am - 3:30pm Saturday Half day as needed OT as needed Company Description Aerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites Company Description Aerospace Manufacturing Company that builds Tube and Duct Assemblies for Airplanes, Missiles and Satellites

Job Description Job Description POSITION SUMMARY The CMM Programmer performs first piece, in-process, and final inspections on complex components with tight tolerances, using both manual and automatic CMMs. This role requires strong CMM programming skills and a solid working knowledge of geometric dimensioning & tolerancing (GD&T) to ensure product conforms to blueprint tolerances and specifications. Accurate documentation of inspection results, and clear communication of findings to the team, are essential to this role. KEY RESPONSIBILITIES • Write CMM programs • Operate both manual and automatic CMMs • Perform first piece inspections and provide feedback on findings and opportunities for improvement to the foreman • Document all inspection results • Identify, document, and report nonconforming product • Calibrate gages • Perform other inspection-related tasks as needed WHAT WE'RE LOOKING FOR Required: • High school diploma or equivalent • Ability to read complex blueprints and perform inspection layouts, including GD&T • Strong computer literacy and proficiency Preferred: • Experience with CMM software such as PC-DMIS or Calypso • ASQ certification (CQT, CQI, or similar) a plus • Background in aerospace, defense, or precision machining • Experience calibrating precision measurement equipment WHY JOIN AMMI? We offer a comprehensive benefits package designed to support you and your family: • Medical Insurance- Choice of 3 PPO plans or HDHP/HSA plan through Blue Cross Blue Shield • Dental Insurance- Delta Dental PPO (Low and High Plan options) • Vision Insurance- EyeMed Access Plan • Company-Paid Life Insurance & AD&D through UNUM • Company-Paid Short-Term & Long-Term Disability • 401(k) with Employer Contribution • Profit-Sharing • Flexible Spending Account (FSA) • Teladoc Virtual Healthcare - $10/visit • Virta Health Weight Wellness Program (no cost to enroll) • Educational Financial Assistance • Uniforms Provided (Company-Paid) • Shoe Allowance • Paid Holidays: New Year's Day, Good Friday, Memorial Day, Independence Day, Labor Day, Thanksgiving, Day After Thanksgiving, Christmas, and your Birthday (floating) • Paid Time Off • Bonuses Company Description Accurate Metal Machining, Inc. (AMMI) is a precision machining company headquartered in Painesville, Ohio, serving aerospace, defense, and industrial markets.We bring the stability of a global organization together with a close-knit team culture built on craftsmanship and precision. If you take pride in making sure every part meets spec down to the tightest tolerance, you'll fit in here. Company Description Accurate Metal Machining, Inc. (AMMI) is a precision machining company headquartered in Painesville, Ohio, serving aerospace, defense, and industrial markets.We bring the stability of a global organization together with a close-knit team culture built on craftsmanship and precision. If you take pride in making sure every part meets spec down to the tightest tolerance, you'll fit in here.

Job Description Job Description CMM Programmer $33.22-$40.00 per hour Location: Carlsbad, CA Join an established, vertically integrated manufacturer where your measurement expertise will help ensure parts meet exact specifications. We're looking for an experienced CMM Programmer with hands-on experience using Open DMIS or PC-DMIS to support inspections, first article work, and quality improvements. What You'll Do Set up, program, operate, and calibrate CMM equipment to inspect parts against specifications. Perform and document receiving, in-process, final, and shipping inspections using precision measuring tools. Support First Article Inspection Reports (FAIRs), nonconformance reports (NCRs), and quality documentation in the ERP system. Partner with Engineering and Production on inspection findings, MRB dispositions, corrective actions, and quality improvements. Support audits involving AS9100, ISO 13485, and ISO 14001 requirements. Train team members on measurement techniques and help cross-functional teams meet production goals. What You'll Bring High school diploma and at least 3 years of hands-on CMM programming and metrology experience . Proficiency with Open DMIS or PC-DMIS, GD&T, dimensional inspection, and precision measurement. Ability to independently program and operate CMM equipment. Knowledge of ISO 9001, AS9100, ISO 13485, ISO 14001, AS9102, and FAR/DFAR requirements. Familiarity with quality testing tools and procedures. Strong English communication skills, including clear, detailed written documentation. Proficiency with Microsoft Office and ERP systems; Epicor experience is a plus . Strong attention to detail, problem-solving skills, and the ability to work independently while collaborating with a team. What We Offer Medical, dental, and vision benefits, plus voluntary supplemental plans. Paid time off, including one week during the end-of-year holiday shutdown. 401(k) plan. Opportunities to work across diverse industries and technologies. A supportive team environment. Ready to put your CMM programming skills to work? Apply today. Company Description Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities. Marquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path. Apply with us! Company Description Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities. Marquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path. Apply with us!

Job Description Job Description We are looking for a CMM Programmer to join our growing company. In this role, you will support our production team, ensuring everything runs smoothly based on the day's production schedule. Our customers drive the work we do. Employees are empowered and driven to provide the best in class service. As an employee, you are well compensated and eligible for paid time off, medical and dental coverage. The CMM Programmer supports the manufacturing operations for the CMM's and all related activities. The CMM Programmer will coordinate and support all activities concerning the Zeiss CMM's including programming, troubleshooting, planned maintenance, annual certifications, repairs, upgrades, etc. They will also be responsible for programming the CMM to measure per drawing specifications and reporting the results. $33.00 per hour Tasks listed are not meant to be all-encompassing: Maintain safety and good housekeeping standards for the site Work under current and approved processes (Shively and Customer) Coordinate, review and present all required reports to management and customers Provide excellent customer service to internal and external customers Coordinate and support all activities concerning the CMMs including programming, troubleshooting, planned maintenance, annual certifications, repairs, upgrades etc. Program the CMM to measure per drawing specifications and report the results Devise and implement new programs and measurement methods that will be used to conduct quality control inspection of incoming material for conformance to specificationManage and program all communications between the gage, the CMM Reporter, Q Das, and report outputs Participate in Gage Recall and Certification tracking activities Report and document Non-Conformances, Corrective Actions, and Continuous Improvements Make decisions within the limits of general standards or procedures Report near misses and incidents and cooperate with investigations Demonstrate and exemplify the Shively Bros. Inc. Core Values Perform other duties as assigned Qualifications: Ability to work independently with little to no supervision Good written and oral communication skills Ability to work well with others, exhibiting teamwork Good interpersonal and leadership skills Ability to multitask Attention to detail Intermediate/Advanced knowledge of materials and tooling Intermediate/Advanced knowledge of gages and CMM's GD&T format knowledge Proficient with Zeiss Calypso and modus 1.6 Renishaw Education and Experience: High school diploma or equivalent preferred Three years of experience in a similar position Physical Requirements : Prolonged periods of standing and sitting at a desk and working on a computer Must be able to lift to 35 pounds at a time Must be able to access and navigate the facility Company Description Become an Employee Owner. Established in 1947, Shively Bros has grown into an industry-leading, North American family of companies. We offer an extensive range of manufacturing and services for manufacturers, including Supply Chain Management, Cutting Tool Presetting, Gage Calibration Management, Lab Management, Engineering Services, Repair/Regrind Management, Scrap Recovery, Business Intelligence Analytics, and Vending or other Point-of-Use Solutions. Company Description Become an Employee Owner. Established in 1947, Shively Bros has grown into an industry-leading, North American family of companies. We offer an extensive range of manufacturing and services for manufacturers, including Supply Chain Management, Cutting Tool Presetting, Gage Calibration Management, Lab Management, Engineering Services, Repair/Regrind Management, Scrap Recovery, Business Intelligence Analytics, and Vending or other Point-of-Use Solutions.