Job Description Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Power Integrity Engineer Location: Valley Green, PA Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We are currently seeking a Power Integrity Engineer to join our Cable Backplane Systems team. The position will be located in Valley Green, PA. We are seeking a skilled and detail-oriented Power Integrity (PI) Engineer to join our high-performance engineering team. In this role, you will be responsible for analyzing, simulating, and optimizing power delivery networks (PDN) for next-generation high-speed systems. The concentration will be specifically on interconnects. You will work closely with signal integrity, PCB design, and hardware teams to ensure robust power delivery that meets primarily impedance requirements with the possible addition of requirements for noise and ripple. Additional responsibilities could include the evaluation of shielding for EMI/EMC remediation. This is a hands-on engineering role that requires strong technical skills, creative problem-solving, and the ability to collaborate with cross-functional teams in a fast-paced environment. RESPONSIBILITIES: Perform power integrity simulations (AC impedance, DC IR drop, and transient analysis) to ensure PDN performance. Design and optimize decoupling strategies, capacitor selection, and placement for complex boards and systems. Interact with customers to determine their power interconnect needs. Perform EMI/EMC risk assessments related to power distribution. Collaborate with SI engineers to co-optimize power and signal integrity. Develop PDN models and validate through lab measurements (VNA impedance sweeps, oscilloscope ripple measurements). Work with PCB designers on layer stack-up, plane assignments, and power routing. Assist in root-cause analysis and debugging of customer power-related issues. Document best practices and contribute to design guidelines for power delivery networks. QUALIFICATIONS: Required: Bachelor's degree in Electrical Engineering or related field (Master's preferred) 3+ years of experience in power integrity, signal integrity, or hardware design Hands-on experience with PDN simulation tools (examples: Keysight PIPro, ANSYS Q3D, HFSS, and SIwave, Cadence Sigrity PowerSI, etc.) Experience with SPICE simulation and transient load modeling Strong understanding of PDN impedance, VRM behavior, and decoupling network design Proficiency in PCB stack-up design, power plane resonance control, and capacitor optimization Excellent analytical, communication, and documentation skills Preferred: Familiarity with high-speed digital systems (SerDes, DDR, PCIe) Knowledge of EMI/EMC compliance testing and mitigation techniques Background in scripting or automation (MATLAB, Python) for data analysis Experience with lab instrumentation: VNAs, oscilloscopes, spectrum analyzers Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin. For additional company information please visit our website at
09/28/2026
Full time
Job Description Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Power Integrity Engineer Location: Valley Green, PA Amphenol High Speed Products Group is the market leader for high speed, high bandwidth electrical connectors for the Telecom/Datacom market (Mobile Networks, Storage, Servers, Routers, Switches, etc.). Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. We are currently seeking a Power Integrity Engineer to join our Cable Backplane Systems team. The position will be located in Valley Green, PA. We are seeking a skilled and detail-oriented Power Integrity (PI) Engineer to join our high-performance engineering team. In this role, you will be responsible for analyzing, simulating, and optimizing power delivery networks (PDN) for next-generation high-speed systems. The concentration will be specifically on interconnects. You will work closely with signal integrity, PCB design, and hardware teams to ensure robust power delivery that meets primarily impedance requirements with the possible addition of requirements for noise and ripple. Additional responsibilities could include the evaluation of shielding for EMI/EMC remediation. This is a hands-on engineering role that requires strong technical skills, creative problem-solving, and the ability to collaborate with cross-functional teams in a fast-paced environment. RESPONSIBILITIES: Perform power integrity simulations (AC impedance, DC IR drop, and transient analysis) to ensure PDN performance. Design and optimize decoupling strategies, capacitor selection, and placement for complex boards and systems. Interact with customers to determine their power interconnect needs. Perform EMI/EMC risk assessments related to power distribution. Collaborate with SI engineers to co-optimize power and signal integrity. Develop PDN models and validate through lab measurements (VNA impedance sweeps, oscilloscope ripple measurements). Work with PCB designers on layer stack-up, plane assignments, and power routing. Assist in root-cause analysis and debugging of customer power-related issues. Document best practices and contribute to design guidelines for power delivery networks. QUALIFICATIONS: Required: Bachelor's degree in Electrical Engineering or related field (Master's preferred) 3+ years of experience in power integrity, signal integrity, or hardware design Hands-on experience with PDN simulation tools (examples: Keysight PIPro, ANSYS Q3D, HFSS, and SIwave, Cadence Sigrity PowerSI, etc.) Experience with SPICE simulation and transient load modeling Strong understanding of PDN impedance, VRM behavior, and decoupling network design Proficiency in PCB stack-up design, power plane resonance control, and capacitor optimization Excellent analytical, communication, and documentation skills Preferred: Familiarity with high-speed digital systems (SerDes, DDR, PCIe) Knowledge of EMI/EMC compliance testing and mitigation techniques Background in scripting or automation (MATLAB, Python) for data analysis Experience with lab instrumentation: VNAs, oscilloscopes, spectrum analyzers Amphenol Corporation is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin. For additional company information please visit our website at
Job Description Job Description Company Description Renesas is a global semiconductor company delivering innovative embedded processing, analog, power, and connectivity solutions. This role supports advanced power management products for demanding compute, AI, datacenter, and infrastructure applications. Job Description Renesas is seeking an experienced Principal Digital Engineer to define scalable verification and validation methodologies for advanced digital power management products used in AI, datacenter, and high-performance computing applications. This role focuses on the system-level verification layer that connects analog behavior, digital implementation, firmware interaction, software tooling, validation data, and customer-facing performance. The successful candidate will help define what must be proven, how it should be measured, and how results should be correlated across models, simulation, emulation, bench validation, and silicon. The ideal candidate combines mixed-signal engineering depth with verification strategy, automation mindset, and the ability to align cross-functional teams around clear, repeatable evidence. WHY THIS ROLE MATTERS Define verification strategy for complex mixed-signal power management systems. Improve confidence in architecture decisions by connecting requirements, models, tests, and measured data. Help execution teams converge faster by turning expert validation knowledge into reusable verification patterns. KEY RESPONSIBILITIES Define mixed-signal verification strategy for digital power controllers and related power management products. Develop system-level verification plans covering sensing paths, ADC/DAC behavior, PWM paths, telemetry, compensation, control-loop behavior, latency, quantization, noise, limits, sequencing, and corner behavior. Establish correlation methodologies across behavioral models, RTL, analog/mixed-signal simulations, emulation, bench validation, and silicon measurements where applicable. Define measurable pass/fail criteria, coverage expectations, reference scenarios, and evidence requirements for architecture and product decisions. Collaborate with systems, analog design, digital design, firmware, design verification, validation, applications, and software/tool teams. Support automation of verification results, including consistent metrics, plots, waveforms, summaries, and structured outputs for engineering review. Identify verification gaps early and help teams close ambiguity between system intent, implementation behavior, and validation evidence. Document verification methodology, interface assumptions, test intent, correlation expectations, and residual risks clearly for technical and leadership audiences. Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline. 8+ years of experience in mixed-signal verification, semiconductor validation, systems engineering, analog/mixed-signal design, design verification, or related product development. Strong understanding of analog and mixed-signal building blocks such as ADCs, DACs, amplifiers, references, sensing paths, timing circuits, PWM paths, or power stages. Experience defining verification plans, validation methodologies, measurable results, and technical evidence for complex electronic systems. Ability to work across analog, digital, firmware, validation, applications, and software/tool teams. Strong communication skills and ability to explain complex cross-domain verification issues clearly. PREFERRED QUALIFICATIONS Experience with digital multiphase controllers, DC/DC converters, voltage regulators, power management ICs, or high-current datacenter power applications. Experience with model-to-silicon correlation, behavioral modeling, real-number modeling, Verilog-AMS, SystemVerilog RNM, MATLAB, Python, SIMPLIS, or equivalent environments. Experience with verification automation, data analysis, test infrastructure, dashboards, databases, or API-driven workflows. Familiarity with control loops, stability, latency, quantization, noise, telemetry, and power-system measurement techniques. Experience creating reusable verification frameworks that improve quality and reduce repeated manual test setup. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier . With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.
09/28/2026
Full time
Job Description Job Description Company Description Renesas is a global semiconductor company delivering innovative embedded processing, analog, power, and connectivity solutions. This role supports advanced power management products for demanding compute, AI, datacenter, and infrastructure applications. Job Description Renesas is seeking an experienced Principal Digital Engineer to define scalable verification and validation methodologies for advanced digital power management products used in AI, datacenter, and high-performance computing applications. This role focuses on the system-level verification layer that connects analog behavior, digital implementation, firmware interaction, software tooling, validation data, and customer-facing performance. The successful candidate will help define what must be proven, how it should be measured, and how results should be correlated across models, simulation, emulation, bench validation, and silicon. The ideal candidate combines mixed-signal engineering depth with verification strategy, automation mindset, and the ability to align cross-functional teams around clear, repeatable evidence. WHY THIS ROLE MATTERS Define verification strategy for complex mixed-signal power management systems. Improve confidence in architecture decisions by connecting requirements, models, tests, and measured data. Help execution teams converge faster by turning expert validation knowledge into reusable verification patterns. KEY RESPONSIBILITIES Define mixed-signal verification strategy for digital power controllers and related power management products. Develop system-level verification plans covering sensing paths, ADC/DAC behavior, PWM paths, telemetry, compensation, control-loop behavior, latency, quantization, noise, limits, sequencing, and corner behavior. Establish correlation methodologies across behavioral models, RTL, analog/mixed-signal simulations, emulation, bench validation, and silicon measurements where applicable. Define measurable pass/fail criteria, coverage expectations, reference scenarios, and evidence requirements for architecture and product decisions. Collaborate with systems, analog design, digital design, firmware, design verification, validation, applications, and software/tool teams. Support automation of verification results, including consistent metrics, plots, waveforms, summaries, and structured outputs for engineering review. Identify verification gaps early and help teams close ambiguity between system intent, implementation behavior, and validation evidence. Document verification methodology, interface assumptions, test intent, correlation expectations, and residual risks clearly for technical and leadership audiences. Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or a related technical discipline. 8+ years of experience in mixed-signal verification, semiconductor validation, systems engineering, analog/mixed-signal design, design verification, or related product development. Strong understanding of analog and mixed-signal building blocks such as ADCs, DACs, amplifiers, references, sensing paths, timing circuits, PWM paths, or power stages. Experience defining verification plans, validation methodologies, measurable results, and technical evidence for complex electronic systems. Ability to work across analog, digital, firmware, validation, applications, and software/tool teams. Strong communication skills and ability to explain complex cross-domain verification issues clearly. PREFERRED QUALIFICATIONS Experience with digital multiphase controllers, DC/DC converters, voltage regulators, power management ICs, or high-current datacenter power applications. Experience with model-to-silicon correlation, behavioral modeling, real-number modeling, Verilog-AMS, SystemVerilog RNM, MATLAB, Python, SIMPLIS, or equivalent environments. Experience with verification automation, data analysis, test infrastructure, dashboards, databases, or API-driven workflows. Familiarity with control loops, stability, latency, quantization, noise, telemetry, and power-system measurement techniques. Experience creating reusable verification frameworks that improve quality and reduce repeated manual test setup. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose, To Make Our Lives Easier . With a global team of over 21,000 engineers and problem solvers in more than 30 countries, we offer the opportunity to work on world leading technology for Automotive, Industrial, Infrastructure, and IoT, shaping a safer, healthier, greener, and smarter future. At Renesas, TAGIE is our culture, grounded in being Transparent, Agile, Global, Innovative, and Entrepreneurial. It shapes how we work, grow and deliver on our purpose together. This collaborative spirit and mindset drive our semiconductor technology to transform industries and impact millions of lives. We believe in rewarding our employees with a competitive benefits package alongside their salary. More information will be provided during the hiring process. Are you ready to join our team and shape the future with us? Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas.
Job Description Job Description HRL Laboratories, an IBM company, pioneers the next frontiers of physical and information science. Delivering transformative technologies in automotive, aerospace and defense, HRL advances the critical missions of its customers to help them remove limitations and create competitive advantage. HRL then transitions the work back to customers - ready for real-world application. For more than 70 years, HRL's rich portfolio of scientific discoveries and engineering innovations continues to build on each other - often in unexpected, profound and far-reaching ways. As a private company owned by IBM, HRL prioritizes purpose over profit, significantly advancing the state of the art. HRL Laboratories advances critical structural and functional materials and semiconductor devices that enable precision navigation, quantum technologies and extreme-environment performance. With expertise from design through deployment, we deliver scalable, high-performance solutions that transform our customers' missions. Our work leverages digital manufacturing and scalable microfabrication techniques to meet tomorrow's toughest challenges. Position Summary: • Design, build, test, and analyze optical, optoelectronic, and photonic experiments for quantum communications systems and platforms • Collaborate with multidisciplinary R&D teams to advance quantum communications technologies Key Responsibilities: • Perform critical engineering and R&D under the supervision of staff scientists for next generation quantum photonic/electronic devices and deployable optical payloads • Design, model, setup, and test of free-space and/fiber optic experiments and design and fabrication of state-of-the-art semiconductor devices • Improve processes, perform measurements, collect, summarize, and analyze data, present and discuss data with other scientists • Work with mechanical and electrical teams to troubleshoot complex systems Required Qualifications: • Bachelor's or master's in physics, Electrical Engineering, Optical Engineering, or related discipline • Some prior experience working with any of microfabrication, free-space/fiber optics, electronics, computer-controlled experiments obtain through coursework, independent study, or other internships • Strong desire to learn and be trained in scientific laboratory techniques and experimental procedures • Must be able to work well in a dynamic team environment and possess excellent communication skills • Working knowledge of free space optics, fiber optics, mechanical CAD software, and rf-test equipment (spectrum analyzers, power meters, oscilloscopes) Physical Requirements: • Must be able to work safely in an optical testing laboratory • Excellent verbal and written communication skills and organization skills are required • Must be proficient in use of computers, engineering workstations, and complex electronic equipment Special Requirements: • US Citizenship with the ability to obtain and maintain a US Government security clearance Compensation and Benefits: Pay Range : $81,800- 98,900 Our salary ranges are determined by role, level, and location (California). The range displayed on each job posting reflects the target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range during the hiring process. Benefits: HRL offers a generous and very competitive total compensation and benefits package. Our Regular/Full Time benefits include medical, dental, vision, life insurance, 401K match, gym facilities, PTO, Sick time, upward mobility, and an exciting and challenging work environment. For more information about our company benefit offerings please visit: Non-Discrimination and Equal Employment Opportunities (U.S.) Don't meet every single requirement? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At HRL, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants u007C U.S. Equal Employment Opportunity Commission For our privacy policy please visit: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
09/28/2026
Full time
Job Description Job Description HRL Laboratories, an IBM company, pioneers the next frontiers of physical and information science. Delivering transformative technologies in automotive, aerospace and defense, HRL advances the critical missions of its customers to help them remove limitations and create competitive advantage. HRL then transitions the work back to customers - ready for real-world application. For more than 70 years, HRL's rich portfolio of scientific discoveries and engineering innovations continues to build on each other - often in unexpected, profound and far-reaching ways. As a private company owned by IBM, HRL prioritizes purpose over profit, significantly advancing the state of the art. HRL Laboratories advances critical structural and functional materials and semiconductor devices that enable precision navigation, quantum technologies and extreme-environment performance. With expertise from design through deployment, we deliver scalable, high-performance solutions that transform our customers' missions. Our work leverages digital manufacturing and scalable microfabrication techniques to meet tomorrow's toughest challenges. Position Summary: • Design, build, test, and analyze optical, optoelectronic, and photonic experiments for quantum communications systems and platforms • Collaborate with multidisciplinary R&D teams to advance quantum communications technologies Key Responsibilities: • Perform critical engineering and R&D under the supervision of staff scientists for next generation quantum photonic/electronic devices and deployable optical payloads • Design, model, setup, and test of free-space and/fiber optic experiments and design and fabrication of state-of-the-art semiconductor devices • Improve processes, perform measurements, collect, summarize, and analyze data, present and discuss data with other scientists • Work with mechanical and electrical teams to troubleshoot complex systems Required Qualifications: • Bachelor's or master's in physics, Electrical Engineering, Optical Engineering, or related discipline • Some prior experience working with any of microfabrication, free-space/fiber optics, electronics, computer-controlled experiments obtain through coursework, independent study, or other internships • Strong desire to learn and be trained in scientific laboratory techniques and experimental procedures • Must be able to work well in a dynamic team environment and possess excellent communication skills • Working knowledge of free space optics, fiber optics, mechanical CAD software, and rf-test equipment (spectrum analyzers, power meters, oscilloscopes) Physical Requirements: • Must be able to work safely in an optical testing laboratory • Excellent verbal and written communication skills and organization skills are required • Must be proficient in use of computers, engineering workstations, and complex electronic equipment Special Requirements: • US Citizenship with the ability to obtain and maintain a US Government security clearance Compensation and Benefits: Pay Range : $81,800- 98,900 Our salary ranges are determined by role, level, and location (California). The range displayed on each job posting reflects the target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range during the hiring process. Benefits: HRL offers a generous and very competitive total compensation and benefits package. Our Regular/Full Time benefits include medical, dental, vision, life insurance, 401K match, gym facilities, PTO, Sick time, upward mobility, and an exciting and challenging work environment. For more information about our company benefit offerings please visit: Non-Discrimination and Equal Employment Opportunities (U.S.) Don't meet every single requirement? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At HRL, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants u007C U.S. Equal Employment Opportunity Commission For our privacy policy please visit: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max) Job Code: 42614 Job Location: Wilmington, MA (on-site) Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: This role leads a Software Integrated Product Team (IPT) within the Space & Mission Systems Segment of L3Harris for our Wilmington MA location. The team develops, integrates, and tests flight software and Electrical Ground Support Equipment (EGSE) software for space-based EO/IR and optical payloads. The ideal candidate has a strong background in space domain, including embedded and real-time software, RTOS environments such as VxWorks, and development of EGSE and test systems for optical payload integration and test. This role requires technical leadership across the full software lifecycle, with responsibility for technical execution, cost, schedule, integration, and risk management. Essential Functions: Lead the Software IPT responsible for flight software and EGSE software development for space payload programs. Provide technical, cost, and schedule leadership across all phases of software development, integration, test, and delivery. Coordinate with Program Management, Systems Engineering, Electronics, FPGA, Integration & Test, and other cross-functional teams. Lead software planning, architecture, execution, and staffing for embedded, real-time, and test software efforts. Oversee development of software for payload command and telemetry, mode control, hardware interfaces, and EGSE/test automation. Ensure program deliverables are met through technical oversight, schedule management, cost tracking, and EVMS reporting where applicable. Lead risk management and RCCA activities for software and integration issues. Support software verification across SIL/HIL, bench, flatsat, and payload-level integration environments. Lead or participate in technical reviews, Independent Review Teams (IRT), and Agile/Scrum activities as needed. Ability to obtain a U.S. Top Secret Security Clearance Qualifications: Bachelor's degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace applications Professional experience in full System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Professional experience with Agile methods, supplier management, and cross-functional execution. Experience in an IPT or lead role overseeing team technical, cost, and schedule responsibilities Preferred Additional Skills: Active U.S. Security Clearance is preferred but not required. PMP or Agile/Scrum certifications are a plus. Experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), simulators (TSIM, VxSIM, SIMIC, MATLAB Simulink), and programming languages (C/C++, Python, scripting). Experience with embedded command and control of mechanisms (e.g., shutters, motors, gimbals), embedded controllers (e.g., PIC, STM, TMS), serial communications (e.g., CAN, TCP/IP, RS422), and distributed messaging (TCP/UDP). Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in estimating large software programs for new business opportunities. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
09/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, IPTL Software Engineer (Optical Space Systems) : Sign-on bonus ($30K max) Job Code: 42614 Job Location: Wilmington, MA (on-site) Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Sign-On Bonus: A sign-on bonus of up to $30K may be included as part of an offer package for this level Job Description: This role leads a Software Integrated Product Team (IPT) within the Space & Mission Systems Segment of L3Harris for our Wilmington MA location. The team develops, integrates, and tests flight software and Electrical Ground Support Equipment (EGSE) software for space-based EO/IR and optical payloads. The ideal candidate has a strong background in space domain, including embedded and real-time software, RTOS environments such as VxWorks, and development of EGSE and test systems for optical payload integration and test. This role requires technical leadership across the full software lifecycle, with responsibility for technical execution, cost, schedule, integration, and risk management. Essential Functions: Lead the Software IPT responsible for flight software and EGSE software development for space payload programs. Provide technical, cost, and schedule leadership across all phases of software development, integration, test, and delivery. Coordinate with Program Management, Systems Engineering, Electronics, FPGA, Integration & Test, and other cross-functional teams. Lead software planning, architecture, execution, and staffing for embedded, real-time, and test software efforts. Oversee development of software for payload command and telemetry, mode control, hardware interfaces, and EGSE/test automation. Ensure program deliverables are met through technical oversight, schedule management, cost tracking, and EVMS reporting where applicable. Lead risk management and RCCA activities for software and integration issues. Support software verification across SIL/HIL, bench, flatsat, and payload-level integration environments. Lead or participate in technical reviews, Independent Review Teams (IRT), and Agile/Scrum activities as needed. Ability to obtain a U.S. Top Secret Security Clearance Qualifications: Bachelor's degree in Computer Engineering, Computer Science, or related field with 9+ years of relevant experience; OR Graduate Degree with 7+ years of relevant experience; OR 13+ years of relevant experience in lieu of a degree. 7+ years experience in embedded software development, system design, debugging, and integration on aerospace applications Professional experience in full System lifecycle including requirements flow down and allocation, design, development, test, and sell-off. Professional experience with Agile methods, supplier management, and cross-functional execution. Experience in an IPT or lead role overseeing team technical, cost, and schedule responsibilities Preferred Additional Skills: Active U.S. Security Clearance is preferred but not required. PMP or Agile/Scrum certifications are a plus. Experience with RTOS (e.g., VxWorks, FreeRTOS, RTLinux, QNX), simulators (TSIM, VxSIM, SIMIC, MATLAB Simulink), and programming languages (C/C++, Python, scripting). Experience with embedded command and control of mechanisms (e.g., shutters, motors, gimbals), embedded controllers (e.g., PIC, STM, TMS), serial communications (e.g., CAN, TCP/IP, RS422), and distributed messaging (TCP/UDP). Knowledge of MBSE tools (e.g., Cameo) and wideband/narrowband telemetry and messaging. Experience in estimating large software programs for new business opportunities. Experience in developing software for microcontrollers with interfaces (e.g., I2C, SPI, UART, CAN). Develop, customize, and maintain Board Support Packages (BSP) for various hardware platforms. Integrate BSP components, including bootloaders, device drivers, and operating systems. In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $135,000.00 - $250,500.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Software Engineer (Advanced Sonar Systems) Job Code: 42766 Job Location: Millersville-MD or Herndon, VA (on-site) Schedule: 9/80 Regular Schedule (Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off) About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. JOB DESCRIPTION: The successful candidate will be based at our Millersville-MD office (onsite). We develop advanced sonar systems and support software that enables system control, data acquisition, and analysis. Work includes software requirements development, software test and integration, and both application level and embedded C/C++ development, including Linux based GUI and system control work. The role also involves UI and embedded software development for equipment operating in diverse environments such as factory, depot, laboratory, and shipboard settings. In addition to technical contributions, this position supports the day to day activities of the Software Engineering Group by providing technical guidance, assigning tasks, participating in complex engineering efforts, reviewing and approving formal documentation, and estimating labor, tools, and other resources to meet budget and schedule commitments. A strong understanding of UI design on Windows and Linux platforms is preferred, and additional hardware related responsibilities may be assigned based on skill set. ESSENTIAL DUTIES AND RESPONSIBILITIES Design and implement software using C/C++ and C#. Execute assigned projects and tasks involving software design, documentation, verification, and validation for sonar systems. Perform technical reviews, design analyses, and the development and selection of hardware and mission critical software. Modify and enhance existing software for operational systems or test facilities. Conduct analyses for computer hardware and software development or implementation; structure work to enable clear progress assessment. Provide independent validation and verification of design concepts and implementation approaches. Develop, test, and document software code, and support integration into higher level assemblies as required. Perform software configuration management to ensure all code reflects the current version and revision level. Implement review and oversight procedures to evaluate design activities for compliance with customer requirements, company standards, engineering best practices, and quality system procedures. Ensure assigned tasks meet technical, schedule, and quality requirements. Identify and report issues, recommending corrective actions or alternatives when cost or schedule risks are identified. Prepare design review materials in support of SRR, PDR, CDR, and other technical audits. Contributions to the development of new technologies and processes, including submitting ideas for IRAD efforts and supporting the execution of funded IRAD and Internal Order projects. Ability to prepare and deliver technical presentations to management and customers. Foster and maintain positive relationships with customers, suppliers, colleagues, industry groups, government agencies, and the community Ability to present proposals and program execution status to internal executives, program managers, and customers. Ability to independently contribute to software requirements development, software testing and integration, and the creation of both application level and embedded C/C++ code on Windows-based and Linux based systems, including GUI and system control development. Ability to travel up to 25%. Ability to obtain and maintain a Secret Security Clearance. QUALIFICATIONS: Bachelor's degree in Computer / Electrical, or Electronics Engineering or equivalent and minimum 9 years of prior relevant experience. Or, Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. 5+ years of experience designing and implement software in C/C++, C# languages. At least 2 years of experience in embedded software, and user interface (UI) software development on Windows and Linux desktop platforms At least 2 years of practical knowledge of project management. Leadership experience within the job area, with comprehensive knowledge and skills in a specific technical discipline and a broad understanding of related functions. Professional experience in project management, software metrics, team leadership, and EVMS. Ability to write concise technical reports documenting findings. Ability to interpret and clearly communicate engineering plans and specifications, with solid knowledge of engineering theory and design criteria. Experience creating and presenting proposals, including developing and reviewing cost estimates and proposal packages. Experience leading large project planning and development activities. PREFERRED ADDITIONAL SKILLS: Understanding of user interface (UI) elements, tools, and development techniques. Experience with Linux OS configuration, including kernel modifications, drivers, and U Boot. Familiarity with multiple programming languages such as C/C++, C#, VB, Verilog, Java, and Structured Text/PLC. Strong analytical and communication skills. Excellent general computer skills and ability to quickly learn new hardware and software applications. Experience using and configuring networking equipment. Strong human relations and collaboration skills. Knowledge of Kafka or similar event streaming platforms. Experience with TCP and UDP socket networking. Linux development experience. In compliance with pay transparency requirements, the salary range for this role is $135,000 - $250,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
09/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Software Engineer (Advanced Sonar Systems) Job Code: 42766 Job Location: Millersville-MD or Herndon, VA (on-site) Schedule: 9/80 Regular Schedule (Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off) About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. JOB DESCRIPTION: The successful candidate will be based at our Millersville-MD office (onsite). We develop advanced sonar systems and support software that enables system control, data acquisition, and analysis. Work includes software requirements development, software test and integration, and both application level and embedded C/C++ development, including Linux based GUI and system control work. The role also involves UI and embedded software development for equipment operating in diverse environments such as factory, depot, laboratory, and shipboard settings. In addition to technical contributions, this position supports the day to day activities of the Software Engineering Group by providing technical guidance, assigning tasks, participating in complex engineering efforts, reviewing and approving formal documentation, and estimating labor, tools, and other resources to meet budget and schedule commitments. A strong understanding of UI design on Windows and Linux platforms is preferred, and additional hardware related responsibilities may be assigned based on skill set. ESSENTIAL DUTIES AND RESPONSIBILITIES Design and implement software using C/C++ and C#. Execute assigned projects and tasks involving software design, documentation, verification, and validation for sonar systems. Perform technical reviews, design analyses, and the development and selection of hardware and mission critical software. Modify and enhance existing software for operational systems or test facilities. Conduct analyses for computer hardware and software development or implementation; structure work to enable clear progress assessment. Provide independent validation and verification of design concepts and implementation approaches. Develop, test, and document software code, and support integration into higher level assemblies as required. Perform software configuration management to ensure all code reflects the current version and revision level. Implement review and oversight procedures to evaluate design activities for compliance with customer requirements, company standards, engineering best practices, and quality system procedures. Ensure assigned tasks meet technical, schedule, and quality requirements. Identify and report issues, recommending corrective actions or alternatives when cost or schedule risks are identified. Prepare design review materials in support of SRR, PDR, CDR, and other technical audits. Contributions to the development of new technologies and processes, including submitting ideas for IRAD efforts and supporting the execution of funded IRAD and Internal Order projects. Ability to prepare and deliver technical presentations to management and customers. Foster and maintain positive relationships with customers, suppliers, colleagues, industry groups, government agencies, and the community Ability to present proposals and program execution status to internal executives, program managers, and customers. Ability to independently contribute to software requirements development, software testing and integration, and the creation of both application level and embedded C/C++ code on Windows-based and Linux based systems, including GUI and system control development. Ability to travel up to 25%. Ability to obtain and maintain a Secret Security Clearance. QUALIFICATIONS: Bachelor's degree in Computer / Electrical, or Electronics Engineering or equivalent and minimum 9 years of prior relevant experience. Or, Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. 5+ years of experience designing and implement software in C/C++, C# languages. At least 2 years of experience in embedded software, and user interface (UI) software development on Windows and Linux desktop platforms At least 2 years of practical knowledge of project management. Leadership experience within the job area, with comprehensive knowledge and skills in a specific technical discipline and a broad understanding of related functions. Professional experience in project management, software metrics, team leadership, and EVMS. Ability to write concise technical reports documenting findings. Ability to interpret and clearly communicate engineering plans and specifications, with solid knowledge of engineering theory and design criteria. Experience creating and presenting proposals, including developing and reviewing cost estimates and proposal packages. Experience leading large project planning and development activities. PREFERRED ADDITIONAL SKILLS: Understanding of user interface (UI) elements, tools, and development techniques. Experience with Linux OS configuration, including kernel modifications, drivers, and U Boot. Familiarity with multiple programming languages such as C/C++, C#, VB, Verilog, Java, and Structured Text/PLC. Strong analytical and communication skills. Excellent general computer skills and ability to quickly learn new hardware and software applications. Experience using and configuring networking equipment. Strong human relations and collaboration skills. Knowledge of Kafka or similar event streaming platforms. Experience with TCP and UDP socket networking. Linux development experience. In compliance with pay transparency requirements, the salary range for this role is $135,000 - $250,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across air, land, sea, space and cyber domains. L3Harris has approximately $18 billion in annual revenue, 48,000 employees and customers in more than 100 countries. Job Tile: Lead, Electrical Engineering - Digital Hardware Job Code: 41862 Job Location: Palm Bay, FL Schedule: 9/80 (Employees work 80 hours over 9 days and have every other Friday off) Work Arrangement: On-Site Job Description L3Harris is seeking a Lead Electrical Engineer - Digital Hardware to join our team in Palm Bay, FL. In this role, you will support the design and development of advanced space-qualified digital hardware for mission-critical applications. This is an opportunity to contribute to innovative spacecraft and payload digital solutions in a fast-paced engineering environment where concepts move into production reality. The ideal candidate brings deep expertise in spacecraft electrical digital subsystem design, including digital architecture development, circuit simulation, detailed analysis, hardware verification, and cross-functional collaboration. This position will play a key role in supporting current and future programs, internal research and development efforts, and strategic growth initiatives. Essential Functions: Lead the design and development of advanced digital and mixed-signal hardware using sound electrical engineering principles and best practices. Support all phases of hardware development, including requirements analysis, architecture definition, detailed design, schematic capture, simulation, documentation, manufacturing, integration, and verification. Translate customer and system-level requirements into detailed electrical specifications and power architectures while balancing technical, cost, and Design and analyze digital and mixed-signal circuit topologies, including: Processor and microcontroller-based circuits FPGA, CPLD, and digital array designs Memory and storage interfaces ADC and DAC interface circuits High-speed digital communication interfaces Clock generation and distribution circuits Data acquisition and control circuits Mixed-signal interface circuits Reset, monitoring, and supervisory circuits Perform detailed analysis of digital circuits for: Timing and margin Thermal performance Signal integrity Power integrity Radiation effects EMI/EMC Component derating Troubleshoot and resolve hardware issues at the component, board, module, payload, and system levels. Use laboratory instruments such as oscilloscopes, source meters, electronic loads, signal generators, multimeters, and DC power supplies to validate designs and investigate issues. Conduct trade studies and develop conceptual digital solutions in support of proposals, IRAD, and new business opportunities. Collaborate with cross-functional teams including systems, firmware, software, mechanical, manufacturing, quality, supply chain, and program leadership. Evaluate component tolerances and environmental impacts to ensure robust design margins for high-reliability applications in harsh operating environments. Support risk reduction and mitigation activities related to obsolescence, cost, producibility, and long-lead materials. Required Qualifications: Bachelor's Degree and a minimum of 9 years of prior relevant experience in Electrical Engineering, Physics, Mathematics, Computer Science, or another relevant STEM field or Graduate Degree and a minimum of 7 years of prior related experience Experience designing and developing digital hardware systems Experience with high-speed or dense processing hardware architectures Experience with hardware integration, verification, and debug Experience working in a collaborative engineering development environment Preferred Qualifications: Ability to obtain a TS/SCI security clearance Experience with mission definition, concept generation, trade studies, preliminary and final design, component selection, integration, test support, materials selection, and design documentation Experience developing qualified deliverable power hardware for space, aerospace, defense, medical, or other mission-critical applications Experience working with manufacturing and production teams in a program environment Experience with Root Cause Corrective Action (RCCA) and Failure Review Boards (FRB) Experience presenting technical material to program leadership, customers, and review boards Strong written, verbal, and interpersonal communication skills Ability to collaborate effectively across technical teams and leadership levels Experience serving as a subcontract technical representative, including supplier evaluation, statement of work development, and technical oversight of external deliverables Experience with digital hardware design for phased array antenna systems, including beamforming control, high-speed data conversion, timing and synchronization, RF control interfaces, and mixed-signal circuit card assembly integration. Experience in one or more of the following areas including: Space-based hardware design High-speed digital design FPGA-based systems Processor and memory subsystem design DSP-based hardware Networking hardware Mixed-signal electronics Experience designing, integrating, and analyzing high-speed electrical and optical interfaces and protocols, including: 10/25 Gb Ethernet PCI Express Gen 2/3/4/5 Electrical-to-optical conversion Optical-to-electrical conversion Fiber-optic transceiver integration Experience with ECAD and analysis tools including: LTSpice PSpice Cadence Siemens Xpedition Hyperlynx 25.10 Experience integrating firmware/software with hardware in lab and system environments MATLAB, Python, or similar programming experience for modeling, analysis, and automation Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition . click apply for full job details
09/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across air, land, sea, space and cyber domains. L3Harris has approximately $18 billion in annual revenue, 48,000 employees and customers in more than 100 countries. Job Tile: Lead, Electrical Engineering - Digital Hardware Job Code: 41862 Job Location: Palm Bay, FL Schedule: 9/80 (Employees work 80 hours over 9 days and have every other Friday off) Work Arrangement: On-Site Job Description L3Harris is seeking a Lead Electrical Engineer - Digital Hardware to join our team in Palm Bay, FL. In this role, you will support the design and development of advanced space-qualified digital hardware for mission-critical applications. This is an opportunity to contribute to innovative spacecraft and payload digital solutions in a fast-paced engineering environment where concepts move into production reality. The ideal candidate brings deep expertise in spacecraft electrical digital subsystem design, including digital architecture development, circuit simulation, detailed analysis, hardware verification, and cross-functional collaboration. This position will play a key role in supporting current and future programs, internal research and development efforts, and strategic growth initiatives. Essential Functions: Lead the design and development of advanced digital and mixed-signal hardware using sound electrical engineering principles and best practices. Support all phases of hardware development, including requirements analysis, architecture definition, detailed design, schematic capture, simulation, documentation, manufacturing, integration, and verification. Translate customer and system-level requirements into detailed electrical specifications and power architectures while balancing technical, cost, and Design and analyze digital and mixed-signal circuit topologies, including: Processor and microcontroller-based circuits FPGA, CPLD, and digital array designs Memory and storage interfaces ADC and DAC interface circuits High-speed digital communication interfaces Clock generation and distribution circuits Data acquisition and control circuits Mixed-signal interface circuits Reset, monitoring, and supervisory circuits Perform detailed analysis of digital circuits for: Timing and margin Thermal performance Signal integrity Power integrity Radiation effects EMI/EMC Component derating Troubleshoot and resolve hardware issues at the component, board, module, payload, and system levels. Use laboratory instruments such as oscilloscopes, source meters, electronic loads, signal generators, multimeters, and DC power supplies to validate designs and investigate issues. Conduct trade studies and develop conceptual digital solutions in support of proposals, IRAD, and new business opportunities. Collaborate with cross-functional teams including systems, firmware, software, mechanical, manufacturing, quality, supply chain, and program leadership. Evaluate component tolerances and environmental impacts to ensure robust design margins for high-reliability applications in harsh operating environments. Support risk reduction and mitigation activities related to obsolescence, cost, producibility, and long-lead materials. Required Qualifications: Bachelor's Degree and a minimum of 9 years of prior relevant experience in Electrical Engineering, Physics, Mathematics, Computer Science, or another relevant STEM field or Graduate Degree and a minimum of 7 years of prior related experience Experience designing and developing digital hardware systems Experience with high-speed or dense processing hardware architectures Experience with hardware integration, verification, and debug Experience working in a collaborative engineering development environment Preferred Qualifications: Ability to obtain a TS/SCI security clearance Experience with mission definition, concept generation, trade studies, preliminary and final design, component selection, integration, test support, materials selection, and design documentation Experience developing qualified deliverable power hardware for space, aerospace, defense, medical, or other mission-critical applications Experience working with manufacturing and production teams in a program environment Experience with Root Cause Corrective Action (RCCA) and Failure Review Boards (FRB) Experience presenting technical material to program leadership, customers, and review boards Strong written, verbal, and interpersonal communication skills Ability to collaborate effectively across technical teams and leadership levels Experience serving as a subcontract technical representative, including supplier evaluation, statement of work development, and technical oversight of external deliverables Experience with digital hardware design for phased array antenna systems, including beamforming control, high-speed data conversion, timing and synchronization, RF control interfaces, and mixed-signal circuit card assembly integration. Experience in one or more of the following areas including: Space-based hardware design High-speed digital design FPGA-based systems Processor and memory subsystem design DSP-based hardware Networking hardware Mixed-signal electronics Experience designing, integrating, and analyzing high-speed electrical and optical interfaces and protocols, including: 10/25 Gb Ethernet PCI Express Gen 2/3/4/5 Electrical-to-optical conversion Optical-to-electrical conversion Fiber-optic transceiver integration Experience with ECAD and analysis tools including: LTSpice PSpice Cadence Siemens Xpedition Hyperlynx 25.10 Experience integrating firmware/software with hardware in lab and system environments MATLAB, Python, or similar programming experience for modeling, analysis, and automation Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition . click apply for full job details
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Software Engineer (Advanced Sonar Systems) Job Code: 42766 Job Location: Millersville-MD or Herndon, VA (on-site) Schedule: 9/80 Regular Schedule (Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off) About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. JOB DESCRIPTION: The successful candidate will be based at our Millersville-MD office (onsite). We develop advanced sonar systems and support software that enables system control, data acquisition, and analysis. Work includes software requirements development, software test and integration, and both application level and embedded C/C++ development, including Linux based GUI and system control work. The role also involves UI and embedded software development for equipment operating in diverse environments such as factory, depot, laboratory, and shipboard settings. In addition to technical contributions, this position supports the day to day activities of the Software Engineering Group by providing technical guidance, assigning tasks, participating in complex engineering efforts, reviewing and approving formal documentation, and estimating labor, tools, and other resources to meet budget and schedule commitments. A strong understanding of UI design on Windows and Linux platforms is preferred, and additional hardware related responsibilities may be assigned based on skill set. ESSENTIAL DUTIES AND RESPONSIBILITIES Design and implement software using C/C++ and C#. Execute assigned projects and tasks involving software design, documentation, verification, and validation for sonar systems. Perform technical reviews, design analyses, and the development and selection of hardware and mission critical software. Modify and enhance existing software for operational systems or test facilities. Conduct analyses for computer hardware and software development or implementation; structure work to enable clear progress assessment. Provide independent validation and verification of design concepts and implementation approaches. Develop, test, and document software code, and support integration into higher level assemblies as required. Perform software configuration management to ensure all code reflects the current version and revision level. Implement review and oversight procedures to evaluate design activities for compliance with customer requirements, company standards, engineering best practices, and quality system procedures. Ensure assigned tasks meet technical, schedule, and quality requirements. Identify and report issues, recommending corrective actions or alternatives when cost or schedule risks are identified. Prepare design review materials in support of SRR, PDR, CDR, and other technical audits. Contributions to the development of new technologies and processes, including submitting ideas for IRAD efforts and supporting the execution of funded IRAD and Internal Order projects. Ability to prepare and deliver technical presentations to management and customers. Foster and maintain positive relationships with customers, suppliers, colleagues, industry groups, government agencies, and the community Ability to present proposals and program execution status to internal executives, program managers, and customers. Ability to independently contribute to software requirements development, software testing and integration, and the creation of both application level and embedded C/C++ code on Windows-based and Linux based systems, including GUI and system control development. Ability to travel up to 25%. Ability to obtain and maintain a Secret Security Clearance. QUALIFICATIONS: Bachelor's degree in Computer / Electrical, or Electronics Engineering or equivalent and minimum 9 years of prior relevant experience. Or, Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. 5+ years of experience designing and implement software in C/C++, C# languages. At least 2 years of experience in embedded software, and user interface (UI) software development on Windows and Linux desktop platforms At least 2 years of practical knowledge of project management. Leadership experience within the job area, with comprehensive knowledge and skills in a specific technical discipline and a broad understanding of related functions. Professional experience in project management, software metrics, team leadership, and EVMS. Ability to write concise technical reports documenting findings. Ability to interpret and clearly communicate engineering plans and specifications, with solid knowledge of engineering theory and design criteria. Experience creating and presenting proposals, including developing and reviewing cost estimates and proposal packages. Experience leading large project planning and development activities. PREFERRED ADDITIONAL SKILLS: Understanding of user interface (UI) elements, tools, and development techniques. Experience with Linux OS configuration, including kernel modifications, drivers, and U Boot. Familiarity with multiple programming languages such as C/C++, C#, VB, Verilog, Java, and Structured Text/PLC. Strong analytical and communication skills. Excellent general computer skills and ability to quickly learn new hardware and software applications. Experience using and configuring networking equipment. Strong human relations and collaboration skills. Knowledge of Kafka or similar event streaming platforms. Experience with TCP and UDP socket networking. Linux development experience. In compliance with pay transparency requirements, the salary range for this role is $135,000 - $250,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
09/28/2026
Full time
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Software Engineer (Advanced Sonar Systems) Job Code: 42766 Job Location: Millersville-MD or Herndon, VA (on-site) Schedule: 9/80 Regular Schedule (Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off) About L3Harris Technologies: L3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers' mission-critical needs. The company provides advanced defense and commercial technologies across space, air, land, sea and cyber domains. L3Harris has approximately $18 billion in annual revenue and 47,000 employees, with customers in more than 100 countries. JOB DESCRIPTION: The successful candidate will be based at our Millersville-MD office (onsite). We develop advanced sonar systems and support software that enables system control, data acquisition, and analysis. Work includes software requirements development, software test and integration, and both application level and embedded C/C++ development, including Linux based GUI and system control work. The role also involves UI and embedded software development for equipment operating in diverse environments such as factory, depot, laboratory, and shipboard settings. In addition to technical contributions, this position supports the day to day activities of the Software Engineering Group by providing technical guidance, assigning tasks, participating in complex engineering efforts, reviewing and approving formal documentation, and estimating labor, tools, and other resources to meet budget and schedule commitments. A strong understanding of UI design on Windows and Linux platforms is preferred, and additional hardware related responsibilities may be assigned based on skill set. ESSENTIAL DUTIES AND RESPONSIBILITIES Design and implement software using C/C++ and C#. Execute assigned projects and tasks involving software design, documentation, verification, and validation for sonar systems. Perform technical reviews, design analyses, and the development and selection of hardware and mission critical software. Modify and enhance existing software for operational systems or test facilities. Conduct analyses for computer hardware and software development or implementation; structure work to enable clear progress assessment. Provide independent validation and verification of design concepts and implementation approaches. Develop, test, and document software code, and support integration into higher level assemblies as required. Perform software configuration management to ensure all code reflects the current version and revision level. Implement review and oversight procedures to evaluate design activities for compliance with customer requirements, company standards, engineering best practices, and quality system procedures. Ensure assigned tasks meet technical, schedule, and quality requirements. Identify and report issues, recommending corrective actions or alternatives when cost or schedule risks are identified. Prepare design review materials in support of SRR, PDR, CDR, and other technical audits. Contributions to the development of new technologies and processes, including submitting ideas for IRAD efforts and supporting the execution of funded IRAD and Internal Order projects. Ability to prepare and deliver technical presentations to management and customers. Foster and maintain positive relationships with customers, suppliers, colleagues, industry groups, government agencies, and the community Ability to present proposals and program execution status to internal executives, program managers, and customers. Ability to independently contribute to software requirements development, software testing and integration, and the creation of both application level and embedded C/C++ code on Windows-based and Linux based systems, including GUI and system control development. Ability to travel up to 25%. Ability to obtain and maintain a Secret Security Clearance. QUALIFICATIONS: Bachelor's degree in Computer / Electrical, or Electronics Engineering or equivalent and minimum 9 years of prior relevant experience. Or, Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. 5+ years of experience designing and implement software in C/C++, C# languages. At least 2 years of experience in embedded software, and user interface (UI) software development on Windows and Linux desktop platforms At least 2 years of practical knowledge of project management. Leadership experience within the job area, with comprehensive knowledge and skills in a specific technical discipline and a broad understanding of related functions. Professional experience in project management, software metrics, team leadership, and EVMS. Ability to write concise technical reports documenting findings. Ability to interpret and clearly communicate engineering plans and specifications, with solid knowledge of engineering theory and design criteria. Experience creating and presenting proposals, including developing and reviewing cost estimates and proposal packages. Experience leading large project planning and development activities. PREFERRED ADDITIONAL SKILLS: Understanding of user interface (UI) elements, tools, and development techniques. Experience with Linux OS configuration, including kernel modifications, drivers, and U Boot. Familiarity with multiple programming languages such as C/C++, C#, VB, Verilog, Java, and Structured Text/PLC. Strong analytical and communication skills. Excellent general computer skills and ability to quickly learn new hardware and software applications. Experience using and configuring networking equipment. Strong human relations and collaboration skills. Knowledge of Kafka or similar event streaming platforms. Experience with TCP and UDP socket networking. Linux development experience. In compliance with pay transparency requirements, the salary range for this role is $135,000 - $250,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Job Description Job Description About Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About You and The Role Zipline's autonomous delivery systems depend on reliable avionics electronics, flex circuits, harnesses, and connectors operating through vibration, repeated motion, temperature cycling, moisture, and manufacturing variation. As a Failure Analysis Engineer, you will investigate failures from fielded systems, development testing, life testing, and manufacturing. You will help reproduce failures, isolate electrical faults, inspect hardware, analyze data, and develop evidence-supported conclusions. This is a hands-on role suited to an early-career engineer or highly technical hardware professional who enjoys working in the lab and wants to develop deeper expertise in electronics, materials, reliability, and physical failure analysis. What You'll Do Investigate failures involving flex circuits, rigid-flex assemblies, PCBAs, connectors, harnesses, solder joints, vias, and electronic components. Preserve failed hardware and collect relevant configuration, test, manufacturing, service, and field data. Reproduce intermittent failures under representative electrical, mechanical, thermal, and environmental conditions. Troubleshoot hardware using schematics, wiring diagrams, multimeters, oscilloscopes, power supplies, electronic loads, logic analyzers, thermal imaging, and protocol tools. Analyze telemetry, test logs, measurements, and inspection results to identify patterns and narrow possible causes. Perform hands-on inspection and support physical analysis using microscopy, X-ray, cross-sectioning, and other appropriate techniques. Develop and execute experiments that prove or disprove suspected failure mechanisms. Use structured methods such as fault trees, 5-Why, fishbone analysis, and 8D to separate symptoms from root cause. Work with Electrical, Mechanical, Test, Reliability, Manufacturing, Quality, and Supplier Engineering to review evidence and determine next steps. Support corrective actions involving product design, manufacturing processes, suppliers, inspection, diagnostics, and end-of-line testing. Verify that corrective actions address the original failure and do not introduce new risks. Write clear failure-analysis reports documenting the hardware configuration, evidence, methods, results, conclusions, and recommended next steps. Maintain a searchable record of failure symptoms, mechanisms, root causes, and validated fixes. Track investigation turnaround time, no-trouble-found rate, corrective-action status, recurrence, and field-failure reduction. What You'll Bring Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, Physics, or a related field, or equivalent hands-on technical experience. Hands-on comfort working with electronics, hardware assemblies, and laboratory equipment. Ability to read electrical schematics, wiring diagrams, PCB layouts, engineering drawings, and component datasheets. Strong troubleshooting fundamentals and a methodical approach to isolating ambiguous or intermittent failures. Experience using standard electrical test equipment such as multimeters, oscilloscopes, power supplies, and logic analyzers. Practical data-analysis skills using Python, MATLAB, JMP, SQL, or equivalent tools. Ability to organize data, identify trends, compare test populations, and communicate what the evidence does and does not support. Curiosity about how electronic, mechanical, material, manufacturing, and environmental factors interact. Clear technical writing and the ability to document assumptions, results, uncertainty, and next steps. Willingness to learn new laboratory, sample-preparation, inspection, and analysis methods. This role is based in South San Francisco and requires regular hands-on work in the laboratory. Occasional travel to suppliers, manufacturers, test facilities, and external analysis laboratories may be required. Nice to Have Demonstrated experience in electronics failure analysis, hardware reliability, product engineering, hardware test, or high-reliability hardware debugging. Knowledge of flex and rigid-flex construction, PCB fabrication, SMT assembly, soldering, crimping, connectors, or electronics manufacturing. Experience with microscopy, X-ray, CT, cross-sectioning, SEM/EDS, dye-and-pry, or other physical FA techniques. Experience with vibration, shock, temperature cycling, humidity, bend cycling, or accelerated-life testing. Experience supporting corrective actions across design, manufacturing, quality, or supplier teams. Familiarity with high-speed interfaces, CAN, Ethernet, SerDes, cameras, RF, motor controls, or power electronics. Familiarity with IPC standards or structured processes such as FRACAS, CAPA, or 8D. Experience in aerospace, robotics, automotive, medical devices, or high-volume electronics. What Success Looks Like Failures are reproduced and narrowed to an evidence-supported cause within an agreed turnaround time. Investigation reports are clear enough for another engineer or technician to understand and continue the work. Intermittent and no-trouble-found returns decrease as diagnostic methods improve. Findings result in better designs, manufacturing controls, inspections, and validation tests. The engineer steadily develops deeper ownership of increasingly complex failure investigations. What Else You Need To Know The starting salary range for this role is $120,000 - $155,000. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Voluntary Self-Identification For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file. As set forth in Zipline 's Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.
09/28/2026
Full time
Job Description Job Description About Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. About You and The Role Zipline's autonomous delivery systems depend on reliable avionics electronics, flex circuits, harnesses, and connectors operating through vibration, repeated motion, temperature cycling, moisture, and manufacturing variation. As a Failure Analysis Engineer, you will investigate failures from fielded systems, development testing, life testing, and manufacturing. You will help reproduce failures, isolate electrical faults, inspect hardware, analyze data, and develop evidence-supported conclusions. This is a hands-on role suited to an early-career engineer or highly technical hardware professional who enjoys working in the lab and wants to develop deeper expertise in electronics, materials, reliability, and physical failure analysis. What You'll Do Investigate failures involving flex circuits, rigid-flex assemblies, PCBAs, connectors, harnesses, solder joints, vias, and electronic components. Preserve failed hardware and collect relevant configuration, test, manufacturing, service, and field data. Reproduce intermittent failures under representative electrical, mechanical, thermal, and environmental conditions. Troubleshoot hardware using schematics, wiring diagrams, multimeters, oscilloscopes, power supplies, electronic loads, logic analyzers, thermal imaging, and protocol tools. Analyze telemetry, test logs, measurements, and inspection results to identify patterns and narrow possible causes. Perform hands-on inspection and support physical analysis using microscopy, X-ray, cross-sectioning, and other appropriate techniques. Develop and execute experiments that prove or disprove suspected failure mechanisms. Use structured methods such as fault trees, 5-Why, fishbone analysis, and 8D to separate symptoms from root cause. Work with Electrical, Mechanical, Test, Reliability, Manufacturing, Quality, and Supplier Engineering to review evidence and determine next steps. Support corrective actions involving product design, manufacturing processes, suppliers, inspection, diagnostics, and end-of-line testing. Verify that corrective actions address the original failure and do not introduce new risks. Write clear failure-analysis reports documenting the hardware configuration, evidence, methods, results, conclusions, and recommended next steps. Maintain a searchable record of failure symptoms, mechanisms, root causes, and validated fixes. Track investigation turnaround time, no-trouble-found rate, corrective-action status, recurrence, and field-failure reduction. What You'll Bring Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, Physics, or a related field, or equivalent hands-on technical experience. Hands-on comfort working with electronics, hardware assemblies, and laboratory equipment. Ability to read electrical schematics, wiring diagrams, PCB layouts, engineering drawings, and component datasheets. Strong troubleshooting fundamentals and a methodical approach to isolating ambiguous or intermittent failures. Experience using standard electrical test equipment such as multimeters, oscilloscopes, power supplies, and logic analyzers. Practical data-analysis skills using Python, MATLAB, JMP, SQL, or equivalent tools. Ability to organize data, identify trends, compare test populations, and communicate what the evidence does and does not support. Curiosity about how electronic, mechanical, material, manufacturing, and environmental factors interact. Clear technical writing and the ability to document assumptions, results, uncertainty, and next steps. Willingness to learn new laboratory, sample-preparation, inspection, and analysis methods. This role is based in South San Francisco and requires regular hands-on work in the laboratory. Occasional travel to suppliers, manufacturers, test facilities, and external analysis laboratories may be required. Nice to Have Demonstrated experience in electronics failure analysis, hardware reliability, product engineering, hardware test, or high-reliability hardware debugging. Knowledge of flex and rigid-flex construction, PCB fabrication, SMT assembly, soldering, crimping, connectors, or electronics manufacturing. Experience with microscopy, X-ray, CT, cross-sectioning, SEM/EDS, dye-and-pry, or other physical FA techniques. Experience with vibration, shock, temperature cycling, humidity, bend cycling, or accelerated-life testing. Experience supporting corrective actions across design, manufacturing, quality, or supplier teams. Familiarity with high-speed interfaces, CAN, Ethernet, SerDes, cameras, RF, motor controls, or power electronics. Familiarity with IPC standards or structured processes such as FRACAS, CAPA, or 8D. Experience in aerospace, robotics, automotive, medical devices, or high-volume electronics. What Success Looks Like Failures are reproduced and narrowed to an evidence-supported cause within an agreed turnaround time. Investigation reports are clear enough for another engineer or technician to understand and continue the work. Intermittent and no-trouble-found returns decrease as diagnostic methods improve. Findings result in better designs, manufacturing controls, inspections, and validation tests. The engineer steadily develops deeper ownership of increasingly complex failure investigations. What Else You Need To Know The starting salary range for this role is $120,000 - $155,000. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply! Voluntary Self-Identification For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file. As set forth in Zipline 's Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.
Job Description Job Description POSITION TITLE: Senior Controls and Automation Engineer DEPARTMENT: Engineering REPORTS TO: Engineering Manager LOCATION: Viola JOB SUMMARY: A Senior Controls & Automation Engineer to design, build, and support custom automated test equipment, manufacturing systems, and embedded control solutions for powertrain development and production support.This role bridges industrial automation, embedded hardware/firmware, and system integration, supporting everything from robotic test cells and PLC-controlled machinery to ECU-integrated embedded devices and Windows-based engineering tools. The ideal candidate is a hands-on engineer comfortable working across electrical design, firmware, PLCs, robotics, HMIs, and on-site commissioning of one-off and low-volume systems ESSENTIAL FUNCTIONS: Industrial Automation & Controls Design, modify, and maintain automated test stands, endurance systems, and manufacturing equipment Program and troubleshoot PLCs and HMIs for presses, test fixtures, and special-purpose machinery Integrate industrial robots with presses and test systems, including interlocks and safety logic Retrofit and modernize legacy equipment where original electronics or controls are obsolete Support and repair custom, one-off automation equipment used in engineering and manufacturing Embedded Hardware & Firmware Design custom embedded control hardware for test systems and product prototypes Develop firmware in C/C++ for microcontroller-based controllers Implement CAN bus communication with ECUs and vehicle subsystems Create embedded solutions for sensors, actuators, motor control, and data acquisition Support prototype development through testing, iteration, and limited production readiness Test Systems & Instrumentation Develop automated engine and motorcycle test systems for endurance, EPA mileage accumulation, and performance testing Build systems for dyno automation, robotic control, and long-duration unattended operation Integrate sensors, cameras, and data acquisition hardware for mechanical and powertrain analysis Develop data visualization and processing tools for test and lab environments Software & Interfaces Develop Windows-based engineering and test applications (Visual Studio / C#) Interface off-the-shelf HMIs and custom hardware for operator control and remote monitoring Support configuration and calibration tools for embedded and test systems ECU & System Integration Integrate and interface with automotive ECUs, including CAN messaging and control features Support ECU feature development and experimentation for R&D projects Work closely with engineering and manufacturing teams to support powertrain development Reverse engineer CAN bus data in order to interface various ECUs with custom test equipment QUALIFICATIONS: Bachelor's degree in Electrical Engineering, Computer Engineering, Mechatronics, or equivalent experience 5+ years experience in industrial automation, controls engineering, or custom machinery Strong experience with: PLC programming and industrial I/O Embedded firmware development (C/C++) Electrical schematics and hardware design, PCB layout. Sensors, actuators, motors, VFDs, and safety circuits Hands-on experience commissioning and troubleshooting machines in real-world environments
09/28/2026
Full time
Job Description Job Description POSITION TITLE: Senior Controls and Automation Engineer DEPARTMENT: Engineering REPORTS TO: Engineering Manager LOCATION: Viola JOB SUMMARY: A Senior Controls & Automation Engineer to design, build, and support custom automated test equipment, manufacturing systems, and embedded control solutions for powertrain development and production support.This role bridges industrial automation, embedded hardware/firmware, and system integration, supporting everything from robotic test cells and PLC-controlled machinery to ECU-integrated embedded devices and Windows-based engineering tools. The ideal candidate is a hands-on engineer comfortable working across electrical design, firmware, PLCs, robotics, HMIs, and on-site commissioning of one-off and low-volume systems ESSENTIAL FUNCTIONS: Industrial Automation & Controls Design, modify, and maintain automated test stands, endurance systems, and manufacturing equipment Program and troubleshoot PLCs and HMIs for presses, test fixtures, and special-purpose machinery Integrate industrial robots with presses and test systems, including interlocks and safety logic Retrofit and modernize legacy equipment where original electronics or controls are obsolete Support and repair custom, one-off automation equipment used in engineering and manufacturing Embedded Hardware & Firmware Design custom embedded control hardware for test systems and product prototypes Develop firmware in C/C++ for microcontroller-based controllers Implement CAN bus communication with ECUs and vehicle subsystems Create embedded solutions for sensors, actuators, motor control, and data acquisition Support prototype development through testing, iteration, and limited production readiness Test Systems & Instrumentation Develop automated engine and motorcycle test systems for endurance, EPA mileage accumulation, and performance testing Build systems for dyno automation, robotic control, and long-duration unattended operation Integrate sensors, cameras, and data acquisition hardware for mechanical and powertrain analysis Develop data visualization and processing tools for test and lab environments Software & Interfaces Develop Windows-based engineering and test applications (Visual Studio / C#) Interface off-the-shelf HMIs and custom hardware for operator control and remote monitoring Support configuration and calibration tools for embedded and test systems ECU & System Integration Integrate and interface with automotive ECUs, including CAN messaging and control features Support ECU feature development and experimentation for R&D projects Work closely with engineering and manufacturing teams to support powertrain development Reverse engineer CAN bus data in order to interface various ECUs with custom test equipment QUALIFICATIONS: Bachelor's degree in Electrical Engineering, Computer Engineering, Mechatronics, or equivalent experience 5+ years experience in industrial automation, controls engineering, or custom machinery Strong experience with: PLC programming and industrial I/O Embedded firmware development (C/C++) Electrical schematics and hardware design, PCB layout. Sensors, actuators, motors, VFDs, and safety circuits Hands-on experience commissioning and troubleshooting machines in real-world environments
Date Posted: 2026-05-07 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, Arizona Job Description: The Test Equipment Engineering (TEE) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TEE is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Senior Software Engineer with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS) Prioritize and handle multiple software engineering tasks concurrently Troubleshoot software and test equipment instrumentation Work in a multidiscipline engineering team environment Develop and derive requirements for software products Qualifications You Must Have: Typically requires a bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience, or an Advanced degree in a related field and minimum 3 years' experience. Five years' experience developing and integrating software applications using C, C#, C++ programming languages in a test environment, as well as Java, Python or Visual Basic. Experience with Windows Operating System and Microsoft Visual Studio is required. The ability to obtain and maintain a U.S. Government issued (Secret) security clearance is required before starting. U.S. citizenship is required, as only U.S. Citizens are eligible for a security clearance. Qualifications We Prefer: Familiar with computer architecture and computer hardware optimization techniques Working knowledge of the development of software drivers for the operation of computer hardware interfaces Working knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 Familiarity with laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters) Experience with Unified Modeling Language (UML) to visualize software architecture and design Experience of software development lifecycles, such as Waterfall and Agile Experience with Software Configuration Management principles Experience with Microsoft Azure DevOps Server or GitHub Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
09/27/2026
Full time
Date Posted: 2026-05-07 Country: United States of America Location: US-AZ-TUCSON- E Hermans Rd BLDG 801 (External Site) Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. This position is 100% on site in Tucson, Arizona Job Description: The Test Equipment Engineering (TEE) team within the Hardware Discipline Center is a multi-discipline organization that provides test solutions to support production lines for our entire missile portfolio. The software team within TEE is responsible for developing advanced windows application solutions for all Raytheon products. We are hands-on, designing with the latest technology and tools, and integrating state-of-the-art software solutions with the most advanced engineering systems in the world. TEE products are in engineering labs, in the field, and in production environments utilized for weapon system products. TEE has job opportunities across all phases of the engineering lifecycle, including demonstrations, early engineering tests, design verification tests, production, and post-production sustainment. The Senior Software Engineer with Test Equipment position is focused on the design, development, integration, and maintenance of software as a part of on-site factory support of systems to support weapon system product development. The selected candidate will develop applications, libraries, and instrument drivers using the software style, development language, and integrated development environment specified by the organization. The selected candidate will contribute to multidiscipline engineering teams. Typical work involves the development of both engineering and production equipment, environments, and systems. As such, the candidate will contribute to the completion of all stages of product development for RMD weapon system products. They will be expected to work, either as a part of a team or independently, to design, develop, and implement system level applications in support of producing and maintaining weapon system products. What You Will Do: Design, develop and integrate object-oriented software applications using C#, C++ in Microsoft Visual Studio in a Windows Operating System (OS) Prioritize and handle multiple software engineering tasks concurrently Troubleshoot software and test equipment instrumentation Work in a multidiscipline engineering team environment Develop and derive requirements for software products Qualifications You Must Have: Typically requires a bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM) and minimum 5 years prior relevant experience, or an Advanced degree in a related field and minimum 3 years' experience. Five years' experience developing and integrating software applications using C, C#, C++ programming languages in a test environment, as well as Java, Python or Visual Basic. Experience with Windows Operating System and Microsoft Visual Studio is required. The ability to obtain and maintain a U.S. Government issued (Secret) security clearance is required before starting. U.S. citizenship is required, as only U.S. Citizens are eligible for a security clearance. Qualifications We Prefer: Familiar with computer architecture and computer hardware optimization techniques Working knowledge of the development of software drivers for the operation of computer hardware interfaces Working knowledge in common computer hardware interface and data protocols such as TCP/IP, UDP, or RS-422 Familiarity with laboratory test instrumentation, electronics, and software (Ex. oscilloscopes, power supplies, digital multimeters) Experience with Unified Modeling Language (UML) to visualize software architecture and design Experience of software development lifecycles, such as Waterfall and Agile Experience with Software Configuration Management principles Experience with Microsoft Azure DevOps Server or GitHub Good written and interpersonal communication skills What We Offer: Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now: Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position requires onsite work in Tucson, AZ: ,-az-location As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
09/26/2026
Full time
Job Description Job Description Company Description: For over 80 years, Puffer-Sweiven has set the standard in equipment and services for process control, automation, safety, and reliability. We help process-intensive facilities run more efficiently and safely by delivering quality products, technical support, and knowledgeable staff to implement the needed process solutions - with the goal of exceeding customer expectations. Our dedication brings the most advanced products and services to our customers throughout the Central and Gulf Coast regions of Texas. Specialties: As an Emerson Impact Partner, we offer a broad base of superior solutions including the top product lines for a given application. Our specialties at Puffer-Sweiven include: Pressure Management Isolation Valves & Actuation Control Valves & Regulators Process Control & Safety Systems Oil & Gas Automation- fiscal custody metering, controls, and SCADA Reliability Solutions & Services Specialty Pumps & Rotating Equipment Instrumentation Maintenance & Repair Services Duties and Responsibilities Machinery Monitoring & Protection Systems Install, configure, commission, and troubleshoot machinery protection and condition monitoring systems. Configure vibration, process, and asset health monitoring devices and associated infrastructure. Verify sensor installation, signal quality, alarm functionality, and communication integrity. Perform startup, testing, and commissioning activities for online monitoring solutions. Support system upgrades, migrations, and modernization projects. Assist with field acceptance testing and customer turnover activities. Software & System Configuration Install, configure, and maintain machinery health, asset monitoring, and condition monitoring software platforms. Configure assets, measurement points, alarms, databases, users, reporting tools, and system architecture. Perform software updates, patching, backups, and licensing activities. Troubleshoot software, database, and communication-related issues. Provide customer training and technical support. Industrial Networking & Communications Configure and troubleshoot Ethernet-based industrial networks. Assign and manage IP addresses, subnetting, gateways, and network connectivity. Configure and validate industrial communication protocols including Modbus TCP, Modbus RTU, OPC, and similar technologies. Assist customers with cybersecurity requirements, firewall configuration, and network access requests. Integrate monitoring systems with PLCs, DCSs, SCADA systems, historians, and enterprise asset management platforms. Coordinate with plant operations, engineering, automation, and IT personnel to establish secure and reliable communications. Technical Support Provide onsite and remote troubleshooting support. Diagnose hardware, software, communication, and instrumentation issues. Generate detailed service reports and technical documentation. Support emergency callouts and critical customer issues when required. Establish and maintain strong customer relationships through technical expertise and professional service. QUALIFICATIONS: Education/Experience: Associate's Degree in Instrumentation, Electronics, Electrical Technology, Industrial Automation, Computer Networking, Engineering Technology, or equivalent work experience. Minimum 3 years of experience supporting industrial instrumentation, automation, controls, machinery monitoring, reliability systems, or related technologies. Strong technical understanding of industrial instrumentation, automation systems, machinery monitoring, or reliability technologies. Experience installing and commissioning industrial electronic equipment in operating facilities. Experience with Windows-based software installation, configuration, and troubleshooting. Working knowledge of industrial networking principles including TCP/IP communications. Experience configuring IP addresses, switches, gateways, and network connectivity. Experience coordinating with customer IT departments regarding server access, cybersecurity requirements, and firewall exceptions. Ability to interpret electrical drawings, wiring schematics, network diagrams, and technical documentation. Strong troubleshooting and problem-solving skills. Must pass DOT and customer required drug testing. Must meet company requirements for driving privileges. Excellent verbal and written communication skills Preferred proficiency with: Experience with machinery protection and condition monitoring systems. Experience with vibration monitoring, rotating equipment reliability, and asset health technologies. Experience commissioning wireless industrial instrumentation and WirelessHART networks. Experience integrating industrial monitoring systems using Modbus, OPC, MQTT, or similar communication protocols. Experience supporting industrial software applications and databases. Familiarity with machine protection standards such as API 670. Experience supporting reliability programs in refining, petrochemical, chemical, power generation, LNG, pipeline, or manufacturing environments. Knowledge of industrial cybersecurity concepts and network segmentation practices. Basic understanding of vibration analysis and machinery diagnostics.
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
09/26/2026
Full time
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
09/26/2026
Full time
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
09/26/2026
Full time
Job Description Job Description Failure Analysis Engineer Description The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for first level failure analysis on Customer returned Server/Workstation computers. Data Analysis/Communication/Issue Resolution Prevention Have appropriate knowledge with the various systems, tools, and procedures used in failure analysis. Be proficient in many applications used for database management and reporting. Visual mechanical inspection (VMI) of Computer Systems, computer components (Power Supply, DIMM, CPU, NIC, SSD, Motherboards, etc.) and/or subcomponents Follows procedures and diagrams in performing engineering change orders, as required Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, etc.) and failure analysis Tests, troubleshoots and repairs complex system failures, as required Assembly & disassembly of units, computer components and subcomponents Skilled in communication, problem solving, and applying experience and expertise. Complete sample analysis for equipment and process qualifications. Identify optimum analytical approaches critical to problems. Conduct innovative use of new analytical tools, equipment and methodologies. Develop records and perform various failure analysis on systems and components to identity root cause. Develop formal failure analysis data reporting and present internally and to client. Requires communication with Asia team in emails and conference calls. Work inside customer lab. Other duties as assigned. Team Leadership Responsible for maintaining a positive work environment while supporting the company's culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications Education and/or Experience Bachelor's degree in Electronics, Mechanical/Electrical Engineering, Computer/Server repair or another related field. Will accept associate's degree with experience in product engineering. 0-2 years' experience in FA role or 4 plus years in electronics quality inspection role Comprehensive computer knowledge is essential. Ability to use electronic test equipment (oscilloscopes & multi-meters, etc.) Remain current developments in field(s) of expertise, regulatory requirements, and a comprehensive knowledge of the Clients products, markets, and objectives as well as industry trends. Must be able to speak English. Able to speak Mandarin Chinese is a plus. Essential Skills: Requires excellent written and oral communication skills. Familiarity with MS Office (advanced excel) Familiar with computer software and operating systems and possess the ability to identify and perform software updates (OS,BIOS, Drivers, Firmware) Ability to read and interpret schematics/block diagrams with detailed understanding of computer and subassembly functionality Ability to read and interpret system board views and board layout details Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finding better ways Demands top performance Inspires commitment Working Condition Environment is climate controlled. Should be able to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement; occasional lifting up to 45 pounds. Able to work in an environment with loud noise. To apply send your resume to
Senior Back-End Developer (Cloud & IoT) We're looking to connect with experienced Back-End Engineers who enjoy building the cloud platforms behind connected IoT products, smart devices, and real-time video applications. We're looking for engineers with experience in: -Java backend development -AWS cloud services & scalable distributed systems -RESTful APIs powering mobile applications and connected devices -Kubernetes, DynamoDB & Git -Secure, high-performance cloud services -Automated testing and modern software engineering practices Bonus if you've worked with: Smart home or consumer electronics products IoT ecosystems and cloud-connected devices Real-time video streaming or media platforms Device-to-cloud communication and large-scale backend infrastructure This is a product-focused engineering role where you'll build the cloud services powering next-generation connected cameras and IoT experiences used by customers around the world. Interested or know someone who'd be a great fit? Feel free to message me directly! By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. EEO Notice Vaco by Highspring is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by federal, state or local law. Vaco by Highspring and its parents, affiliates, and subsidiaries are committed to the full inclusion of all qualified individuals. As part of this commitment, Vaco by Highspring and its parents, affiliates, and subsidiaries will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact . Vaco by Highspring also wants all applicants to know their rights that workplace discrimination is illegal. Representation Notice By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. You also agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. For residents of Ontario, Canada: Based on Highspring's discussions with its Client, Highspring's understanding is that this position for employment is a current vacancy (either through Highspring as a contractor or with the client directly). Privacy Notice Vaco by Highspring and its parents, affiliates, and subsidiaries ("we," "our," or "Vaco by Highspring") respects your privacy and are committed to providing transparent notice of our policies. California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees here. Virginia residents may access our state specific policies here. Residents of all other states may access our policies here. Canadian residents may access our policies in English here and in French here. Residents of countries governed by GDPR may access our policies here. Additionally, submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. More details about Vaco by Highspring's use of AI can be found here (). Further assessment of candidates beyond this initial phase will be conducted by recruiters and hiring managers. Vaco by Highspring does not know and cannot opine on if its client's use of AI products in hiring. Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual's skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. The individual may also be eligible for discretionary bonuses.
09/24/2026
Full time
Senior Back-End Developer (Cloud & IoT) We're looking to connect with experienced Back-End Engineers who enjoy building the cloud platforms behind connected IoT products, smart devices, and real-time video applications. We're looking for engineers with experience in: -Java backend development -AWS cloud services & scalable distributed systems -RESTful APIs powering mobile applications and connected devices -Kubernetes, DynamoDB & Git -Secure, high-performance cloud services -Automated testing and modern software engineering practices Bonus if you've worked with: Smart home or consumer electronics products IoT ecosystems and cloud-connected devices Real-time video streaming or media platforms Device-to-cloud communication and large-scale backend infrastructure This is a product-focused engineering role where you'll build the cloud services powering next-generation connected cameras and IoT experiences used by customers around the world. Interested or know someone who'd be a great fit? Feel free to message me directly! By submitting to this position, you are agreeing to be included in our talent pool for future hiring for similarly qualified positions. EEO Notice Vaco by Highspring is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race (including but not limited to traits historically associated with race such as hair texture and hair style), color, sex (includes pregnancy or related conditions), religion or creed, national origin, citizenship, age, disability, status as a veteran, union membership, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, political affiliation, or any other protected characteristics as required by federal, state or local law. Vaco by Highspring and its parents, affiliates, and subsidiaries are committed to the full inclusion of all qualified individuals. As part of this commitment, Vaco by Highspring and its parents, affiliates, and subsidiaries will ensure that persons with disabilities are provided reasonable accommodations. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact . Vaco by Highspring also wants all applicants to know their rights that workplace discrimination is illegal. Representation Notice By submitting to this position, you agree that you will be giving Vaco by Highspring the exclusive right to present your as a candidate for the foregoing employment opportunity. You further agree that you have represented information about yourself accurately and have not affirmatively misrepresented your qualifications. You also agree to maintain as confidential, to the fullest extent permitted by law, any information you learn from Vaco by Highspring about the position and you will limit disclosure of information about the position only to the extent necessary to perform any obligations in furtherance of your application. In exchange, Vaco by Highspring agrees to exercise reasonable efforts to represent you through all solicitation, job screening and resume dispersal. For residents of Ontario, Canada: Based on Highspring's discussions with its Client, Highspring's understanding is that this position for employment is a current vacancy (either through Highspring as a contractor or with the client directly). Privacy Notice Vaco by Highspring and its parents, affiliates, and subsidiaries ("we," "our," or "Vaco by Highspring") respects your privacy and are committed to providing transparent notice of our policies. California residents may access Vaco by Highspring HR Notice at Collection for California Applicants and Employees here. Virginia residents may access our state specific policies here. Residents of all other states may access our policies here. Canadian residents may access our policies in English here and in French here. Residents of countries governed by GDPR may access our policies here. Additionally, submissions to this position are subject to the use of AI to perform preliminary candidate screenings, focused on ensuring minimum job requirements noted in the position are satisfied. More details about Vaco by Highspring's use of AI can be found here (). Further assessment of candidates beyond this initial phase will be conducted by recruiters and hiring managers. Vaco by Highspring does not know and cannot opine on if its client's use of AI products in hiring. Pay Transparency Notice Determining compensation for this role (and others) at Vaco by Highspring depends upon a wide array of factors including but not limited to: the individual's skill sets, experience and training; licensure and certification requirements; office location and other geographic considerations; other business and organizational needs. With that said, as required by local law, Vaco by Highspring believes that the following salary range referenced above reasonably estimates the base compensation for an individual hired into this position in geographies that require salary range disclosure. The individual may also be eligible for discretionary bonuses.
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
09/24/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
Mid-Continent Instruments and Avionics
Bel Aire, Kansas
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
09/23/2026
Full time
COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer , you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionics provides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PIeb7f0cb72cc0-2601
Mid-Continent Instruments and Avionics
Leoti, Kansas
Job Description Job Description COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI83dc-2601
09/19/2026
Full time
Job Description Job Description COME JOIN MID-CONTINENT! "Where your work is valued-above-market pay, real work-life balance, and a team that feels like home." THE POSITION As a Software Certification Engineer, you will provide engineering and technical support in the evaluation and testing of existing and emerging technologies, systems, and capabilities. You will plan and implement the RTCA DO-178C and DO-254 lifecycle processes for avionics, power electronics, and battery systems. You'll verify complex microcontroller and FPGA designs to achieve coverage of functional and structural aspects. Product areas include cockpit displays and instruments, local and remote sensing, data conversion and storage, lithium battery management, AC/DC and DC/DC power conversion up to 8000W, in-seat power solutions, and various other components needed in aircraft systems. To be successful in this role, you'll need to provide expert analysis to meet the highest level of safety and reliability, implementing safety-critical software design processes. THIS POSITION MAY BE FOR YOU IF You have a bachelor's degree in computer engineering or related field You have a minimum of one year of experience with RTCA DO-178C or similar safety-critical software design process. You are proficient in C programming. You have the ability to work directly with target hardware, including lab bench equipment and other tools for debugging and analysis. You are proficient with Microsoft Office. You have strong attention to detail. You are organized, focused and results oriented. You are a problem-solver with critical thinking and prioritizing skills. You have excellent verbal, written and interpersonal communication skills. WE WOULD REALLY LIKE IT IF (but it's not a deal breaker) You have experience with C#, or Python languages for a PC application software. You have familiarity with VHDL and RTCA DO-254. You have familiarity with formal coding standards and safety-critical design considerations. WHAT YOU CAN EXPECT FROM ONE DAY TO THE NEXT Create and review design data within the software qualification lifecycle process. Practice safety-critical methods, create plans, requirements, design standards, coding standards, change tracking and verification, formal and functional verification Test and troubleshoot prototype and certified code on target hardware. Includes working in a lab bench environment with the necessary test equipment Design embedded software for microcontroller-based systems, as well as PC-based applications for verification and manufacturing Support software design using current tools, design environments and documentation methods Prototype and execute test programs to verify compliance with applicable performance, regulatory, and quality requirements WE ARE ONE OF THE BEST PLACES TO WORK We provide competitive pay and a comprehensive benefits package. We promote an environment where you can excel in your career while maintaining a healthy work-life balance. Our facility is climate controlled, clean, organized, and safe. We operate in a professional, light manufacturing environment. We believe anything worth doing is worth doing right - every time. We have frequent events to keep work interesting. Our food drive is super impressive, we enjoy an annual food truck fest appreciation day, monthly fruit/donut day, employee luncheons throughout the year, wellness challenges with incentives, and frequent ticket raffles for local sporting and cultural events. We have a small company feel - even though we're doing big things! WHO WE ARE Founded in 1964, Mid-Continent Instruments and Avionicsprovides superior instruments, avionics and power solutions to the global aerospace community. We operate one of the largest maintenance, overhaul and exchange programs in the world, and deliver safe and certified products, using innovative technologies and sophisticated clean sheet designs. At Mid-Continent Instruments and Avionics, we are committed to quality, service, integrity, and professionalism. Our employees serve the best customers from all over the world in general, business and commercial, advanced air mobility, defense and special missions markets. In this role, you'll be an important part of the reason our customers consider us a premier instrument, avionics, and aircraft power solutions provider. This job description is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Actual compensation offered within the targeted salary range will be determined by factors such as job-related knowledge, skills, and experience. Compensation details: 00 Yearly Salary PI83dc-2601
What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of "power" that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize "the joy and freedom of mobility" by developing new technologies and an innovative approach to achieve a "zero environmental footprint." We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Software & System Test Engineer role in EA2 is responsible for delivering defined engineering assignments with guidance, while expanding the breadth of your technical knowledge and starting to deepen your expertise in your specific technology area. The Software & System Test Engineer is also expected to assign priorities and execute a plan to avoid being late on deliverables. They should be working closely with Technical Leadership and create a decision matrix for solving a problem or trouble shoot with multiple options as well as having strong teamwork mentality. Together with the guidance of Technical Expert, the Software & System Test Engineer should be able to recognize potential cascading impact created by a change either in their part towards other systems, or other systems change impact toward their part, and be able to proactively communicate to avoid issues. They guarantee the integrity of the electrical control system for their system(s). As a member of the Electrical & Electronics Architecture (EEA) Division, the Software & System Test Engineer is expected to design our vehicles' electrical and electronics infrastructure, integrate and package the software from all divisions, and ensure protection from cyber threats and attacks. The Software & System Test Engineer I takes ownership when it comes to developing an EEA function / feature / component cluster on the vehicle. Key Accountabilities Project and team management: Breaking down project concept details into required development activities and deciding the overall ECU development plan with Technical Leadership's guidance and support, correlating technical project details with key stakeholders and negotiating the schedule for deliverables. Informing technical leadership of project status often is expected. Engineering specification design for Body/Powertrain ECU applications, including electrical circuit hardware and software in tools such as MATLAB Simulink or MS VISIO. Setting the direction to create design concepts before converting to requirements and functional specifications, then conducting design reviews with technical leadership. Engineering troubleshooting, root cause analysis and solution design: Working hands-on in prototype or mass production level vehicles to identify responsible system(s) functional issues and deciding the steps required for resolution. Testing and verification of ECU specifications related to hardware and software: Performing testing in prototype or mass production level vehicles related to electromagnetic compatibility (EMC) or verification of technical change points to ensure proper electrical functional performance, quality and reliability. Accountable to create test result reports and conduct verification reviews with technical leadership. Improvement and innovation: Identify shortcomings and suggest improvements to existing processes, systems and procedures to increase efficiency and other key metrics. Documentation: Management of multiple concurrent developments with the ability to recognize problems in advance and navigate the unknown, with the experience to see the next step and create a decision matrix for solving a problem or troubleshoot with multiple options. Report concern(s) items to Technical Leadership and identify/propose C/Ms for resolution after conducting thorough root cause analysis. Work with suppliers to coordinate requirements, schedule activities, and address issues in a timely manner. Qualifications, Experience, and Skills BSEE or BSME degree, or equivalent experience. 0 to 2 years of closely related experience or equivalent combination of education and experience required. Effective communication skills (written, verbal and presentation). Ability to cultivate and manage relationships of varying levels in/out of the organization, including supplier. Ability to acclimate to new environments, negotiate through unknowns and meet new people. Ability to manage time effectively and productively. Solid quantitative/analytical problem-solving and decision-making skills. Computer skills, such as PowerPoint, Excel, MS Project, Word, CANalyzer etc. Ability to multi-task and work independently. Acute attention to detail. Strong collaboration skill(s). Working Conditions Commitment to work necessary work hours to achieve all responsibilities, including overtime and operating periodically at early and late day hours. Must be able to lift 20 lbs. Kneeling, bending, sitting, standing, and maneuvering inside of vehicles is required. Travel is sometimes required - 5% (International travel may be requested). This is a hands-on position; associate is expected to work on the actual vehicle with tools. Candidate can expect to spend a portion of their time working in the lab - confirming their systems on bench, on the car, in thermal chambers, and on HILS system Office work is split between on-site (80%) and remote (20% Work from Home). Vehicle-level testing is conducted either on-site in a specified lab or offsite at a supplier/contracted facility. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
09/09/2026
Full time
What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of "power" that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize "the joy and freedom of mobility" by developing new technologies and an innovative approach to achieve a "zero environmental footprint." We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose The Software & System Test Engineer role in EA2 is responsible for delivering defined engineering assignments with guidance, while expanding the breadth of your technical knowledge and starting to deepen your expertise in your specific technology area. The Software & System Test Engineer is also expected to assign priorities and execute a plan to avoid being late on deliverables. They should be working closely with Technical Leadership and create a decision matrix for solving a problem or trouble shoot with multiple options as well as having strong teamwork mentality. Together with the guidance of Technical Expert, the Software & System Test Engineer should be able to recognize potential cascading impact created by a change either in their part towards other systems, or other systems change impact toward their part, and be able to proactively communicate to avoid issues. They guarantee the integrity of the electrical control system for their system(s). As a member of the Electrical & Electronics Architecture (EEA) Division, the Software & System Test Engineer is expected to design our vehicles' electrical and electronics infrastructure, integrate and package the software from all divisions, and ensure protection from cyber threats and attacks. The Software & System Test Engineer I takes ownership when it comes to developing an EEA function / feature / component cluster on the vehicle. Key Accountabilities Project and team management: Breaking down project concept details into required development activities and deciding the overall ECU development plan with Technical Leadership's guidance and support, correlating technical project details with key stakeholders and negotiating the schedule for deliverables. Informing technical leadership of project status often is expected. Engineering specification design for Body/Powertrain ECU applications, including electrical circuit hardware and software in tools such as MATLAB Simulink or MS VISIO. Setting the direction to create design concepts before converting to requirements and functional specifications, then conducting design reviews with technical leadership. Engineering troubleshooting, root cause analysis and solution design: Working hands-on in prototype or mass production level vehicles to identify responsible system(s) functional issues and deciding the steps required for resolution. Testing and verification of ECU specifications related to hardware and software: Performing testing in prototype or mass production level vehicles related to electromagnetic compatibility (EMC) or verification of technical change points to ensure proper electrical functional performance, quality and reliability. Accountable to create test result reports and conduct verification reviews with technical leadership. Improvement and innovation: Identify shortcomings and suggest improvements to existing processes, systems and procedures to increase efficiency and other key metrics. Documentation: Management of multiple concurrent developments with the ability to recognize problems in advance and navigate the unknown, with the experience to see the next step and create a decision matrix for solving a problem or troubleshoot with multiple options. Report concern(s) items to Technical Leadership and identify/propose C/Ms for resolution after conducting thorough root cause analysis. Work with suppliers to coordinate requirements, schedule activities, and address issues in a timely manner. Qualifications, Experience, and Skills BSEE or BSME degree, or equivalent experience. 0 to 2 years of closely related experience or equivalent combination of education and experience required. Effective communication skills (written, verbal and presentation). Ability to cultivate and manage relationships of varying levels in/out of the organization, including supplier. Ability to acclimate to new environments, negotiate through unknowns and meet new people. Ability to manage time effectively and productively. Solid quantitative/analytical problem-solving and decision-making skills. Computer skills, such as PowerPoint, Excel, MS Project, Word, CANalyzer etc. Ability to multi-task and work independently. Acute attention to detail. Strong collaboration skill(s). Working Conditions Commitment to work necessary work hours to achieve all responsibilities, including overtime and operating periodically at early and late day hours. Must be able to lift 20 lbs. Kneeling, bending, sitting, standing, and maneuvering inside of vehicles is required. Travel is sometimes required - 5% (International travel may be requested). This is a hands-on position; associate is expected to work on the actual vehicle with tools. Candidate can expect to spend a portion of their time working in the lab - confirming their systems on bench, on the car, in thermal chambers, and on HILS system Office work is split between on-site (80%) and remote (20% Work from Home). Vehicle-level testing is conducted either on-site in a specified lab or offsite at a supplier/contracted facility. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.
