371 jobs found

Job Description Job Description Special Information This position is an on-site position which requires the incumbent to complete their work primarily at an NAU site, campus, or facility with or without accommodation. Opportunities for remote work are rare. This position is subject to the availability of funding. Driving a vehicle on behalf of the university is anticipated to be a regular part of this position. Arizona Administrative Code Fleet Safety Policy requires all employees who drive on university business become authorized by submitting Driver's license information for driving record monitoring, and completion of training appropriate to the level of driving performed. The law applies to all faculty, staff, and students who drive personal or university-owned motorized vehicles for any business purpose. More information on the NAU Authorized Driver Policy can be found on the NAU website. Due to this project's funding source, this position is open only to U.S. citizens and lawful permanent residents (green card holders). The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Work on this project may involve technical data, hardware, or software subject to U.S. export control regulations, including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR); the incumbent must be able to comply with applicable export control requirements and with any project-specific technology control plan. About the Department/College The Radiant Center for Remote Sensing, in partnership with the Dynamic and Active Systems Lab (DASL) in the Steve Sanghi College of Engineering at Northern Arizona University, seeks a Postdoctoral Research Associate to serve as lead technical researcher on a sponsored research project focused on radio source localization from unmanned aerial systems. This is one of several concurrent postdoctoral scholar recruitments at Radiant Center, and the successful candidate will collaborate closely with fellow postdoctoral researchers and faculty working simultaneously on related projects. About the Position The project, EMS Overmatch, develops and field-tests methods for locating radio-frequency sources using an aerial platform, combining signal-based position estimation with path-planning strategies that guide the UAV toward the vantage points that best resolve a source's location. The work builds on the lab's history of developing UAV-based radio-tracking systems, extending that foundation toward more capable localization and platform hardware for this new application area. The general research plan progresses from building out and validating a single-vehicle localization system. This will include hardware integration, field data collection, and flight testing across the varied terrain around Flagstaff. The program will progress toward more advanced localization and path-planning capabilities as the research matures. The postdoc will supervise graduate student researchers supporting the project, work closely with the PI, and contribute to technical reporting and manuscript preparation. The position is based in Flagstaff, AZ. Work Environment: This position requires a substantial amount of fieldwork, including UAV flight testing across Flagstaff-area terrain ranging from desert and canyon country to ponderosa pine, mixed conifer forest, and alpine tundra (spanning close to 8,000 feet of elevation change within about an hour of campus), as well as occasional overnight or multi-day travel for more distant field campaigns and for conference travel. Laboratory work involves electronics assembly/test equipment, RF signal generators and spectrum analyzers, 3D printers, and drone hardware. The position may require occasional overtime, particularly around field campaigns and sponsor reporting deadlines. The position may require handling Controlled Unclassified Information (CUI) in accordance with sponsor and university data-security requirements. Responsibilities Include 45% - Radio Source Localization & Path Planning Research Lead development of algorithms and software development for real-time radio-frequency (RF) source localization from an aerial platform. Develop and evaluate path-planning strategies that optimize UAV positioning to improve localization accuracy and efficiency. Investigate RF propagation modeling approaches, including terrain-aware and simplified models, to characterize tradeoffs between prediction accuracy and computational cost in complex terrain. Contribute to the ongoing evolution of the project's research approach as findings develop, including potential extensions to additional operating scenarios. 25% - UAV Platform Development, Field Testing & Test Coordination Lead integration and adaptation of UAV hardware and RF-sensing payloads (hardware and software) to meet project and applicable federal hardware requirements. Plan and lead field data collection campaigns and flight tests across varied terrain to support algorithm development and validation. Coordinate test logistics and scheduling with the research team, including field-site arrangements, safety planning, and equipment readiness. Develop simulation-based and hardware-in-the-loop testing of localization and path-planning software. Collaborate with other researchers conducting related work on related topics in a team environment. 15% - Team Supervision & Mentoring Direct the day-to-day technical work of graduate student researchers supporting the project. Mentor graduate students in research methods, technical development, and professional growth. 10% - Dissemination, Reporting & Travel Prepare technical reports and milestone updates for project sponsors. Author and co-author peer-reviewed manuscripts and conference presentations. Travel to attend and present research findings at technical conferences, and travel to field sites to support testing and data collection campaigns. 5% - Other Perform other duties as assigned in support of lab and project needs. Minimum Qualifications Ph.D. in Electrical Engineering, Mechanical Engineering, Robotics, or a closely related field, completed prior to the start date. A combination of related education, experience, and training may be used as an equivalent to the above Minimum Qualifications. Preferred Qualifications Demonstrated research experience in RF signal processing, propagation modeling, source localization, or a closely related discipline such as optimization, estimation, or controls. Proficiency in Python and/or C++. Applied experience with software-defined radio (SDR) systems. Robotic path/trajectory planning or simultaneous localization and mapping (SLAM) experience. Hands-on experience with drone hardware and software, including integrating sensors and compute onto UAV flight- controller/autopilot stacks (e.g., Pixhawk, Cube, ArduPilot/PX4) and edge-compute platforms (e.g., Raspberry Pi). Field research/testing experience with UAV systems Record of peer-reviewed publications in the area of RF topic and/or robotics. Demonstrated ability to mentor and direct graduate student researchers. FAA Part 107 Remote Pilot Certificate, or willingness to obtain one shortly after hire. Knowledge, Skills, & Abilities Strong programming skills in Python and/or C++. Working knowledge of optimization, estimation, or path-planning methods, and RF propagation/signal processing principles. Ability to take initiative and complete complex, ambiguous technical tasks with minimal direct supervision. Ability to synthesize complex technical information into clear written reports, manuscripts, and presentations. Ability to safely plan and execute UAV field operations, including in remote/rugged terrain and under variable weather conditions. Ability to mentor and direct the day-to-day technical work of graduate student researchers. Compensation Salary range begins at $70,000. Annual salary commensurate with candidate's qualifications and related experience. Pre-Employment Check Northern Arizona University requires satisfactory results for the following: a criminal background investigation, an employment history verification and a degree verification (in some cases) prior to employment. You may also be required to complete a fingerprint background check. Also, as an employer in the state of Arizona, NAU is required to participate in the federal E-Verify program that assists employers with verifying new employees' right to work in the United States. This position has been identified as a safety/security sensitive position. Therefore, per AZ Revised Statute, Northern Arizona University requires satisfactory results for the following: a criminal background investigation, employment history investigation, degree verification (in some cases) and fingerprinting. If you are applying for a job that requires a CDL, you will be required to register with the Federal Motor Carrier Safety Administration Drug & Alcohol Clearinghouse and adhere to the clearinghouse requirements. Notice of Availability of the Annual Fire and Security Report Each year Northern Arizona University releases an Annual Security Report. The report is a result of a federal law known as the Clery Act. The report includes Clery reportable crime statistics for the three most recent completed calendar years and discloses procedures . click apply for full job details

Job Description Job Description Data Center Technician San Antonio, Texas On-site work Contract, paid per work order or shift About Service Robot Co. Service Robot Co. helps businesses across all 50 states choose, deploy and maintain commercial robots, with 24/7 support. We supply all types of robots for all types of automation. We handle site assessments, robot selection, installation, system integration and team training. Purchase, financing and rental options are available, backed by ongoing maintenance and repairs. One partner from your first consultation through everyday operation. The role Install and maintain hardware inside data centers. You will work with remote engineers to complete physical tasks such as installing servers, running cables, and replacing failed parts. What you will do Install, cable, and label servers, switches, and storage equipment. Replace drives, memory, power supplies, fans, and optical components. Test repairs before closing work tickets. Run, terminate, and test copper and fiber cabling. Follow diagrams, work instructions, and approved maintenance schedules. Give remote engineers clear updates on what you see and do. Record equipment serial numbers, connections, and locations. Follow site security procedures when removing or disposing of hardware. What we are looking for Experience in IT support, cabling, AV, electronics repair, or building computers. Ability to follow detailed instructions and keep accurate records. Comfort working independently and communicating with remote engineers. Availability for overnight maintenance work. Comfort working on your feet in cold, noisy rooms with hearing protection. Ability to pass a background check and site security screening. Training You will complete an online course through our Service Robot Co. Academy, followed by in-person training and the industry certifications needed for this role. Training and certifications are free for selected candidates. Your first assignment is paid, with a specialist supporting you remotely. Share your work If you have a resume, portfolio, project links, photos, videos, or other examples of your work, please include them with your application. We would like to see something you have built, fixed, installed, or worked on. Work from a job, a course, or a personal project is welcome. Share only material you have permission to share. These are optional, so you can still apply if you do not have them.

Job Description Job Description Description: Location: Tri-Cities, WA Travel: Up to 20% Reports To: Corporate VP of IS The IS Specialist III serves as the primary on-site technology leader supporting a multi-site operation of 50-200 users. This role ensures stable, secure, and efficient IT operations while coordinating closely with the Corporate IS team for advanced engineering, development, cybersecurity, and infrastructure initiatives. This is a senior-level technical generalist role combining Windows infrastructure support, business systems reporting, project coordination, industrial systems integration, and local technical leadership. The position is hands-on and part of the broader corporate IS team, which includes senior infrastructure engineers, developers, helpdesk, and junior development resources. Duties Infrastructure & Systems Operations (Primary Focus) Serve as the local lead for Windows-based infrastructure (Windows 10/11, Microsoft 365, Active Directory, core software platforms, hardware systems, and web services). Coordinate with the corporate infrastructure team on network support, backup and disaster recovery, endpoint management, and server lifecycle planning. Escalate complex issues appropriately while maintaining local ownership and accountability. Maintain documentation of systems, diagrams, configurations, and asset inventories. Assist with user provisioning, workstation deployments, and site-level hardware standards. Project Coordination & Implementation Lead site-level technology projects from requirements gathering through deployment. Coordinate with corporate developers and infrastructure engineers on larger initiatives. Manage timelines, vendor engagement, testing, and deployment activities. Evaluate new software and hardware solutions and provide structured recommendations. Assist with task estimation, prioritization, ROI evaluation, and project documentation. Hardware Integration & Operational Support Support integration of industrial or facility systems with enterprise IT infrastructure. Coordinate system integration between hardware platforms and internal software applications. Maintain appropriate segmentation between operational and corporate systems. Security & Compliance Support Ensure local systems adhere to corporate cybersecurity policies. Support NIST 800-171 and Sarbanes-Oxley-aligned controls in coordination with Corporate IS. Assist with audits through documentation, evidence gathering, and change control support. Promote secure configuration standards and end-user security best practices. Business Systems Lead & Reporting Participate in the SDLC for waste tracking, procurement, accounting, asset management, and ancillary information systems initiatives. Develop and maintain SQL queries and SQL Server reports (SQL, SSRS, RDL). Partner with operations to develop business requirements, validate system designs, update system documentation, and oversee implementation. Assist with data validation, testing, and minor integrations. Requirements: 10+ years of progressive IT experience in systems administration, infrastructure, or business systems roles; OR a four-year related degree with 5+ years of relevant experience. Strong Microsoft ecosystem experience (Windows Server/Client, Active Directory). Solid SQL experience (query writing, stored procedures, SSRS development). Experience supporting multi-site or distributed operations. Ability to manage technical priorities independently in an operational environment. Strong written and verbal communication skills across technical and non-technical stakeholders. Prefered Experience Experience in regulated or industrial environments. Experience with .NET, Go, JavaScript, C#, or other development environments. Familiarity with waste tracking, ERP, or accounting systems. Working knowledge of network fundamentals (firewalls, VLANs, VPN). Experience coordinating technical projects. Understanding of API integrations and data exchange models. This role serves as a senior embedded technical leader and operational bridge between site operations and Corporate IS. It provides hands-on technical support, business systems insight, and practical project leadership while leveraging centralized corporate expertise for deep engineering and development functions.

Job Description Job Description CoreWeave is The Essential Cloud for AI . Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do The Technical Deployment Regional Manager - Tiger Team is responsible for overseeing multiple data center builds, both new and existing, within their region during the physical infrastructure delivery phase. You will lead a team of regional Tiger Team Build Leads and Technicians, own the plan of action for every build in your region, and serve as the connective tissue between the on-site team and the Project Management, Program Management, Procurement, and Regional Data Center Operations teams. CoreWeave operates as a single unit, and this role exists to make sure every site in your region has the people, materials, and direction it needs to deliver ahead of aggressive customer deadlines. About the Role Manage and deploy new and ongoing data center sites within your region, owning the action plan for each build from kickoff through delivery. Build and maintain strong working relationships across the business in your region, with Project Management, Program Management, and Regional Data Center Managers as your closest partners. Sync daily with on-site Tiger Team Build Leads to assist where needed, resolve blockers, and escalate issues immediately so builds stay on schedule. Set weekly goals and daily plans of action for Build Leads, including contingency plans when site conditions change. Attend weekly capacity meetings and build sync meetings, capture updates relevant to your region, and relay them to your build leads on regional calls. Maintain high visibility in build communication channels to support the boots-on-the-ground team, who often have limited connectivity during active builds. Partner with Procurement and inventory teams on inbound and outbound shipments, keeping the BOM current and immediately reporting short, damaged, or missing gear. Assess staffing needs weekly and adjust team coverage across sites; coordinate headcount requirements with the Project Coordinator. Own and maintain the Tiger Team site trackers, completing weekly updates to prepare for the following week. Travel to sites in your region to provide hands-on support and make on-the-ground decisions to pivot or push a build. Advance and enforce data center standards, and develop and implement site-specific build documentation. Cultivate and maintain vendor and colocation partner relationships. Formulate efficiency strategies to ensure the timely completion of projects, and provide progress reports on builds to relevant stakeholders. Ensure site compliance with local safety standards, regulations, and internal policies, and foster a positive safety culture through communication, accountability, training, and reporting. Lead weekly toolbox talks and create training sessions to grow team knowledge across data center operations, power, networking, hardware, and fiber. Conduct regular 1:1s with all team members, document feedback, and build personal and career development plans that grow your technicians technically and professionally. Provide consistent, direct communication when performance or CoreWeave core values are not met, partnering with HR when further action is required. Comply with training protocols established by the Global Alignment Team and uphold CoreWeave values at all regional sites. Who You Are 3+ years of management experience Strong interpersonal and collaboration skills Deep understanding of data center topology, data center deployment and operations, and infrastructure knowledge 5+ years of computer hardware experience (troubleshooting, assembling, deploying) 2+ years of Linux operating system experience 4+ years of fiber/ethernet cabling experience 4+ years of supply chain experience Comprehensive knowledge of data center cut sheets and overheads Strong understanding of cable management and hardware orientation Ability to communicate effectively with vendors, facilities, network engineers, project managers, and Data Center Operations peers Excellent time management skills, with the ability to take ownership of a build and meet the demands of tight deadlines A hands-on leader who works alongside the team, sets the example for accountability, and leads through change Ability to travel and work in an environment that operates 24/7 All physical requirements are expected with reasonable accommodations This role requires up to 40% travel throughout the year. While most site visits occur during the work week, weekend travel may be necessary to meet urgent operational demands. Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: Be Curious at Your Core Act Like an Owner Empower Employees Deliver Best-in-Class Client Experiences Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and provides the opportunity to develop innovative solutions to complex problems. As we get set for takeoff, the growth opportunities within the organization are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base pay for this position ranges from $120,000 to $145,000. Pay is based on a number of factors, including market location, and may vary depending on job-related knowledge, skills, and experience. This position includes a discretionary bonus, equity, and a comprehensive benefits package. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: Medical, dental, and vision insurance - 100% paid for by CoreWeave Company-paid Life Insurance Voluntary supplemental life insurance Short and long-term disability insurance Flexible Spending Account Health Savings Account Tuition Reimbursement Ability to Participate in Employee Stock Purchase Program (ESPP) Mental Wellness Benefits through Spring Health Family-Forming support provided by Carrot Paid Parental Leave Flexible, full-service childcare support with Kinside 401(k) with a generous employer match Flexible PTO Catered lunch each day in our office and data center locations A casual work environment A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA) , CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Job Description CoreWeave is The Essential Cloud for AI . Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . About the role: The Tiger Team, Technical Deployment Lead, will support the expansion of our Data Centers across the U.S and Canada. The Technician must work well with others and will help ensure overall availability and reliability to meet or exceed the defined service levels of the hybrid travel data center operations. This position involves infrastructure delivery on all CoreWeave data centers, training on-site teams, and hardware and network diagnostics. This is a 100% onsite role at one of our West coast region U.S. data centers , with up to 60% of travel required on a rotational basis. What You'll Do: Nationwide travel to data centers to build and deploy new and ongoing sites Implementation and documentation of a global data center standard Troubleshoot hardware and networks Root cause analysis of hardware and software failures Train internal teams Perform on-site audits through our set QA/QC process Provide technical support to global data center teams Develop tools and scripts to update server and networking hardware Perform maintenance of test and tools equipment Follow-up project support Who You Are: You are a skilled and motivated technician with the ability to influence others who thrives in a fast-paced, hands-on environment. You are passionate about technology and possess the following qualifications: You have hands-on experience troubleshooting and assembling computer hardware. You are proficient with the Linux operating system. You possess a comprehensive knowledge of data center cut sheets and technical documentation. You have a strong understanding of best practices for cable management and hardware orientation. You are an effective communicator who collaborates seamlessly with network engineers and project managers. You excel at time management and take full ownership of your projects to meet demanding deadlines. You are flexible, with the ability to travel and work in a 24/7 operational environment. You can lift up to 50 lbs and are comfortable working in elevated locations. (All physical requirements are subject to reasonable accommodations.) The base salary range for this role is $90,000 to $102,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: Medical, dental, and vision insurance - 100% paid for by CoreWeave Company-paid Life Insurance Voluntary supplemental life insurance Short and long-term disability insurance Flexible Spending Account Health Savings Account Tuition Reimbursement Ability to Participate in Employee Stock Purchase Program (ESPP) Mental Wellness Benefits through Spring Health Family-Forming support provided by Carrot Paid Parental Leave Flexible, full-service childcare support with Kinside 401(k) with a generous employer match Flexible PTO Catered lunch each day in our office and data center locations A casual work environment A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA) , CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Job Description Responsible for the installation of various types of Information Technology (IT) hardware devices and cabling in a data center environment. This position requires the intermediate knowledge of data center hardware and systems to include the ability to interpret the manufacturer's guides for installation into data center racks, the understanding of space, power, and cooling requirements, as well as mounting hardware specifications. Requirements and duties of the Data Center Hardware Technician II • Evaluate Data Center infrastructure requirements (rack space, network, power, cabling, etc.) and coordinating necessary resources to prepare space for the installation of equipment. • Coordinate necessary facilities resources such as electric and cooling for specialized equipment such as high voltage storage area networks and large servers requiring redundant power. • Provision the cabling, floor cut outs, and rack rails and mounting hardware for the installation of IT devices and systems such as servers, switches, routers, power cables, fiber and copper cables, power distribution units, and keyboard, video, and mouse (KVM) components. • Perform end to end installation of patch cables both fiber and copper as well as management cabling and cross connect cabling. • Perform troubleshooting assistance such as rebooting, visual check of system indicator lights, and perform the replacement of suspected failed installation components (fiber, cables, connectors, iDRAC, power distribution units) in conjunction with the systems engineers to enable the system to return to an operational state. • Follow labeling standards and collect, track, and update all configuration changes and inventory information in an Excel spreadsheet, SharePoint, or data center information system. • Adhere to all data center safety rules and policy as well as installation standards. • Shall perform other duties as required such as un-crating and unboxing large numbers of system and pallets of gear and subsequent removal of refuse to keep data center clear of all walkway hazards. • Proficiency in ability to generate interpret wiring and cabling diagrams in Visio and CADD. Proficiency in Microsoft Office (Project, Excel, Word, etc.). • Monitors data center IT and environmental systems for failures and coordinates with vendors or repair technicians for repairs or replacements. Assist the FBI in developing, managing, sustaining, and using a tracking database and scanning gun for hardware inventory control, including IT and system equipment, warranty status, and maintenance agreement applications. • Manage (i.e., stock, store, issue), control, document, sustain, and maintain expendable and non-expendable parts and tools and cable inventories of FBI and vendor equipment. • The Contractor shall perform IT and system hardware maintenance and IT or system equipment replacement services in response to requested maintenance. • Keep Data Center infrastructure and IT equipment in operating condition consistent with OEM requirements, performing corrective, adaptive, and preventative maintenance tasks as needed and/or scheduled. • The Contractor shall possess the ability to perform copper and fiber communications cable installations and terminations as well as utilize test equipment to certify the terminations are to manufacturer standards. • The Contractor shall provide timely problem resolution. • The Contractor shall continually transition knowledge to the Government staff through training and assistance on how to use the technology using industry best practices. Author step by step solutions for Tiers 1 and Tiers 2 for frequently asked questions and problem resolution references. Experience/Education requirements for the Data Center Hardware Technician II This position shall be filled with individuals that have a minimum of three years of data center hardware and cable installation experience. The individual must possess knowledge of National Standards as pertaining to Data Center IT infrastructure including Building Industry Consulting Service International (BICSI), Telecommunications Industry Association TIA-606 and TIA-942. (BICSI) Installer 2 for both Copper (INSTC) and Fiber (INSTF) as well as Computing Technology Industry Association (CompTIA) A+ certification required. An associate degree or vocational degree in Information Technology Systems is preferred. Physical Demands of the Data Center Hardware Technician II position The nature of the Hardware Engineer duties have physical demands such as pulling, cabling, lifting, kneeling, crawling, etc. As such, the Contractor shall: • The Contractor shall be required to lift IT equipment during installation and removal along with installing communications cabling under a raised floor structure. • The Contractor shall be able to lift to 50 pounds for short periods of time. • The Contractor shall use cable termination equipment, test equipment, power tools (Sawzall, drill, crimping tools, etc.) for the tasks as required for the position. • The Contractor shall use tools to include wrenches, screw drivers, and power tools. • The Contractor shall operate manual forklifts and data center rack lifts as required for the tasks for the position. • The Contractor shall wear safety gear (e.g., safety shoes, goggles, glasses, hearing protection) while performing tasks.

Job Description Job Description This position is a hybrid role located in Winchester, VA. Relocation to Winchester or a surrounding commutable area is required for candidates not already within commuting distance. Title: Engineering Configuration Manager, Hydrogen Company: Heven AeroTech Location: Winchester, VA - HYBRID FLSA: Exempt Role Summary: The Engineering Configuration Manager for Hydrogen owns the configuration management and documentation backbone of Heven AeroTech's hydrogen generation and fueling technologies, guiding them from engineering development into scalable, repeatable manufacturing. Based at our Winchester, VA facility, this role governs product baselines, change control, and design documentation-ensuring hardware, software, baseline designs, and change histories remain consistent across engineering, production, and field operations. Working cross-functionally with fuel cell engineering, program management, quality, supply chain, and production teams, the Configuration Manager ensures Heven's hydrogen systems transition from concept to the production floor safely, on schedule, and at the cost and quality targets required by our defense and commercial customers. Essential Responsibilities: Bill of Materials (BOMs): Structuring and maintaining multi-level engineering BOMs and manufacturing BOMs, ensuring full traceability down to individual components, raw materials, or sub-assemblies. Change Control Management: Owning the formal end-to-end change management workflow for Engineering Change Requests/Orders (ECR / ECO / ECN), from evaluating a proposed change to routing it through approval and verifying implementation. PLM/PDM System Ownership: Administering product data management and product lifecycle management software (e.g., Windchill, Teamcenter, Arena, Aras) to enforce revision control, access permissions, and workflow rules. Cross-Discipline Alignment: Serving as the central nexus connecting design engineering, supply chain, manufacturing, and quality assurance to prevent "version drift" between design releases and vendor orders. Qualifications & Experience: Required: Bachelor's degree in Mechanical Engineering, Chemical Engineering, Manufacturing Engineering, or a related technical discipline. 5+ years of experience in product lifecycle management, manufacturing engineering, new product introduction (NPI), or a related technology transfer role. Demonstrated experience taking hardware products from engineering prototype through production, including DFM/DFA reviews and stage-gate processes. Working knowledge of BOM structures, engineering change management, and PLM/PDM tooling. Experience reading and working with engineering drawings, P&IDs, and system schematics. Strong project management skills, with the ability to coordinate cross-functional teams across engineering, supply chain, quality, and production. Excellent written and verbal communication skills, with the ability to translate technical detail into clear documentation and decisions for varied audiences. Preferred: Background in energy, aerospace, or defense hardware programs. Familiarity with high-pressure gas systems and relevant codes and standards (NFPA 2, ASME B31.3, CGA). Experience supporting hazard analyses (HAZOP, FMEA). Experience scaling manufacturing at an early-stage or low-rate-initial-production. Familiarity with defense procurement and export control considerations (ITAR/EAR, MTCR) as they relate to production planning. Direct experience with hydrogen generation/electrolyzer technology. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer performing documentation, data entry, and configuration management tasks. Regular use of hands and fingers to operate a computer keyboard, mouse, and other office equipment. Frequent movement between office areas, engineering spaces, and the production/manufacturing floor. Ability to occasionally stand and walk for extended periods while conducting reviews, inspections, or floor coordination. Ability to occasionally lift, carry, and move objects weighing up to 25 pounds (e.g., hardware components, documentation, or equipment). Occasional bending, stooping, kneeling, crouching, or reaching to inspect components, sub-assemblies, or equipment. Sufficient visual acuity to read engineering drawings, P&IDs, system schematics, and detailed technical documentation, both on screen and in print. Ability to communicate clearly and effectively, both verbally and in writing, with cross-functional teams in person and remotely. Ability to work in a manufacturing environment that may include exposure to noise, moving machinery, and high-pressure gas systems, requiring adherence to all safety protocols and use of personal protective equipment (PPE) as required. Ability to wear required PPE (e.g., safety glasses, hearing protection, closed-toe/safety footwear) when on the production floor or in testing areas. May occasionally be required to work extended hours to meet project deadlines or support production schedules. Benefits Overview: Heven AeroTech offers a competitive benefits package designed to support the health, financial security, and overall well-being of our employees and their families. Benefits include medical, dental, and vision coverage, retirement plans, paid time off/sick, and additional protections such as critical illness, hospital indemnity, accident coverage, and short- and long-term disability. Equal Employment Opportunity Statement: Heven AeroTech is an Equal Opportunity Employer and considers all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic under applicable law. Budgeted Salary Range: $105,000-$135,000 USD

Job Description Job Description POSITION TITLE: Senior Controls and Automation Engineer DEPARTMENT: Engineering REPORTS TO: Engineering Manager LOCATION: Viola JOB SUMMARY: A Senior Controls & Automation Engineer to design, build, and support custom automated test equipment, manufacturing systems, and embedded control solutions for powertrain development and production support.This role bridges industrial automation, embedded hardware/firmware, and system integration, supporting everything from robotic test cells and PLC-controlled machinery to ECU-integrated embedded devices and Windows-based engineering tools. The ideal candidate is a hands-on engineer comfortable working across electrical design, firmware, PLCs, robotics, HMIs, and on-site commissioning of one-off and low-volume systems ESSENTIAL FUNCTIONS: Industrial Automation & Controls Design, modify, and maintain automated test stands, endurance systems, and manufacturing equipment Program and troubleshoot PLCs and HMIs for presses, test fixtures, and special-purpose machinery Integrate industrial robots with presses and test systems, including interlocks and safety logic Retrofit and modernize legacy equipment where original electronics or controls are obsolete Support and repair custom, one-off automation equipment used in engineering and manufacturing Embedded Hardware & Firmware Design custom embedded control hardware for test systems and product prototypes Develop firmware in C/C++ for microcontroller-based controllers Implement CAN bus communication with ECUs and vehicle subsystems Create embedded solutions for sensors, actuators, motor control, and data acquisition Support prototype development through testing, iteration, and limited production readiness Test Systems & Instrumentation Develop automated engine and motorcycle test systems for endurance, EPA mileage accumulation, and performance testing Build systems for dyno automation, robotic control, and long-duration unattended operation Integrate sensors, cameras, and data acquisition hardware for mechanical and powertrain analysis Develop data visualization and processing tools for test and lab environments Software & Interfaces Develop Windows-based engineering and test applications (Visual Studio / C#) Interface off-the-shelf HMIs and custom hardware for operator control and remote monitoring Support configuration and calibration tools for embedded and test systems ECU & System Integration Integrate and interface with automotive ECUs, including CAN messaging and control features Support ECU feature development and experimentation for R&D projects Work closely with engineering and manufacturing teams to support powertrain development Reverse engineer CAN bus data in order to interface various ECUs with custom test equipment QUALIFICATIONS: Bachelor's degree in Electrical Engineering, Computer Engineering, Mechatronics, or equivalent experience 5+ years experience in industrial automation, controls engineering, or custom machinery Strong experience with: PLC programming and industrial I/O Embedded firmware development (C/C++) Electrical schematics and hardware design, PCB layout. Sensors, actuators, motors, VFDs, and safety circuits Hands-on experience commissioning and troubleshooting machines in real-world environments

Job Description Job Description Job Summary: The Senior BMS Controls and Algorithm Engineer leads the design, development, and validation of Battery Management System (BMS) controls, estimation algorithms, and functional features for high-voltage battery systems. The role covers the functional scope of a production BMS-state estimation (SoC, SoH, SoP, SoE), contactor controls, cell balancing, thermal management, isolation monitoring, diagnostics, and functional safety-across multiple chemistries and applications. This role features MATLAB/Simulink and model-based design development approach to deliver production software that improves battery performance, safety, and life, and partners with systems, software, validation, and vehicle integration teams to bring it to production. Responsibilities: Develop and validate BMS state estimation algorithms using Kalman filtering, adaptive observers, and model-based methods. Develop BMS functional control features related to contactor and pre-charge control sequencing, cell balancing, thermal management, charge/discharge limit arbitration, wake/sleep behavior, and multi-pack control features. Develop diagnostics and fault-handling strategies covering cell, sensor, isolation, contactor, communication, and thermal faults, including detection, reaction, and recovery. Support functional safety development per ISO 26262, including safety goals, Failure Modes, Effects, and Diagnostic Analysis (FMEDA) inputs, safety mechanisms, and Automotive Safety Integrity Level (ASIL) rated software. Develop high-voltage isolation monitoring, interlock handling, and high-voltage (HV) safety logic. Develop equivalent-circuit and physics-based battery models for real-time embedded execution and offline simulation. Design controls algorithms to be scalable across chemistries, cell formats, and pack architectures. Define software and controls requirements from customer, vehicle, and system-level inputs. Perform algorithm and feature validation through MIL, SIL, HIL, bench, and vehicle testing. Support embedded software integration, auto-code generation, calibration, and production software releases. Analyze battery and vehicle data using Python and modern data tools to refine models, calibrations, and diagnostics. Apply AI-assisted engineering tools to accelerate algorithm development, simulation, validation, scripting, and documentation. Support root cause analysis and issue resolution across prototype, validation, launch, and production phases. Collaborate with hardware, systems, software, validation, and vehicle integration teams, and participate in customer technical reviews. Adhere to federal and state regulations. Adhere to all company policies, processes, and procedures. Performs other duties as requested, directed, or assigned. Predictable and reliable attendance. Position Qualifications: Bachelor's degree in Electrical, Computer, Controls, Mechanical Engineering, or related technical field. Minimum of five (5) years of experience in BMS, battery controls, or embedded automotive software development. Strong hands-on experience with MATLAB, Simulink, Stateflow, and model-based design. Experience developing BMS functional controls such as contactor/pre-charge control, cell balancing, thermal management, and current/power limit arbitration. Experience developing state estimation algorithms using Kalman filtering or observer-based methods. Experience with BMS diagnostics, fault detection and reaction, and high-voltage isolation monitoring. Working knowledge of ISO 26262 and functional safety as applied to high-voltage battery systems. Experience with embedded software integration, auto-code generation, and production release processes. Experience with HIL/SIL validation and Controller Area Network (CAN) tools including CANalyzer, CANoe, Vehicle Spy, or equivalent. Proficiency in Python for data analysis and validation workflows. Strong analytical, troubleshooting, and communication skills. Key Competencies : Decision Making & Analysis: Makes sound decisions based upon a mixture of data-driven analysis, expertise, experience, and judgment; collects relevant information, seeking input from others, and identifies connections and/or root causes of problems Continual Improvement: Displays a consistent orientation toward producing the highest quality products or services, while keeping a focus on sustainability. Constantly looking for incremental improvements in work processes and results. Takes Initiative: Exhibits strong drive for results and success; conveys a sense of urgency and drives issues to closure; persists despite obstacles and opposition. Delivers Results: Achievement-oriented, feeling a sense of urgency to reach goals on time, if not before. Teamwork: Works cooperatively with others to accomplish team goals and organizational objectives. Communications: Exchanges thoughts, feelings, and information effectively Physical Requirements / Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Prolonged periods sitting at a desk and working on a computer. Constantly operates a computer and other office equipment. Ability to adjust focus, especially due to concentration on a computer screen. Works in a temperature-controlled office environment, with occasional work in outdoor weather conditions, and in industrial environments. The noise level in the work environment can be moderately loud. Why Join Us American Battery Solutions (ABS) provides comprehensive 100% employer paid benefit plans to employees and their family, competitive salary and retirement program. ABS employs a diverse and inclusive workforce. Benefits Overview Paid time off includes 3 weeks vacation, up to 72 hours sick, 15 holidays, and parental leave. 100% company-paid medical, dental, vision, short-term disability, long-term disability, and life insurance. Flexible Spending Account (FSA) and Health Savings Account (HSA) offerings. Company provided 401K savings plan with immediately vested matching contributions to help you save for retirement. Voluntary benefits offerings. Tuition assistance. Employee Referral Program. Employee development and career growth opportunities. About Us American Battery Solutions Inc. ("ABS") is a manufacturer of advanced batteries for commercial, fleet, and industrial on- and off-road vehicles. Located in the heart of the U.S. automotive region with facilities in Michigan and Ohio. In 2023, ABS was acquired by Komatsu, a world leader in construction, mining, forestry, and industrial heavy equipment in support of Komatsu's 2050 carbon neutrality goal. ABS continues to operate as an independent entity serving Komatsu applications while continuing to expand and grow our core commercial, fleet and industrial business. As we have grown, ABS has assembled a world-class team of dedicated and experienced engineers. This team is equipped with a deep understanding of high-voltage, automotive-grade battery systems from concept development and prototyping, to testing and validation, to high-volume production. We pride ourselves on developing a diverse team of next generation battery experts. The Location - Lake Orion American Battery Solutions Headquarters and Innovation Center is located in the heart of South-East Michigan in Orion Township. Orion Township is a Pure Michigan Trail Town that has a long-standing dedication to enhancing trails and pathways in its community, which is home to the Polly Ann Trail, Paint Creek Trail, and Iron Belle Trail. The township has more than 50 miles of trails. Southeast Michigan also boasts some of the best eating around! Whether your interest is in furthering your education, enjoying one of the many regional sporting events, or enjoying the vast outdoors that Michigan has to offer, you'll be at the center of it here! AMERICAN BATTERY SOLUTIONS IS AN EQUAL OPPORTUNITY EMPLOYER.

Job Description Job Description BRIEF DESCRIPTION: The Controls Engineer is a member of a team of electric and controls professionals, responsible for design, integration and testing of Schuler industrial control systems. This role places a heavy emphasis on the development and design of industrial press and automation controls. These controls projects are in general mission-critical and require a strong commitment to on-time delivery. Projects range from hardware modifications to complete equipment and system upgrades, including new electrical hardware, control PCs and PLCs, HMIs and integrated safety systems. Service and supporting roles, as outlined below, are also an integral part of this position. MAJOR DUTIES AND RESPONSIBILITIES: Hardware design and development Design and develop the layout of control systems including all required PLC, PC, HMI, safety, and communication hardware. Create bills of materials in Schuler's ERP system. Create hardware schematics and approval of finished schematics. Responsible for following and implementing all applicable standards and customer requirements, including local and national safety standards such as OSHA, ANSI, and CSA. Research and apply new technologies to improve Schuler's competitiveness. Service and supporting roles Support the Field Service Group in preparation of installations and updates. Provide troubleshooting assistance to Schuler field service technicians and engineers. Assist onsite installation if required. Occasional service calls may be required. Visit customers on occasional sales or project meetings. Perform as Project Manager on specific jobs based on assignment by the Service Engineering Manager. Support Customer Service Representatives in spare parts order processing by providing technical information. Interface with the customer as needed to resolve issues and technical concerns. Supports new machine sales with technical information when requested. REQUIREMENTS: Bachelor's degree preferred A minimum of three years of experience in designing industrial control systems, preferably in the field of hydraulic and mechanical power presses and press automation systems Knowledge in Allen Bradley RSLogix 5, 500, and Studio 5000 is a plus Knowledge in Siemens S7F, S5 is a plus Experience with industrial networking such as PROFIBUS, PROFINET, EtherNet/IP and EtherCat AutoCAD Electrical, E-Plan P8 Proficient user of Microsoft Office 2010 Familiar with ERP systems, preferably SAP. Ability to travel, nationally and abroad. Must be able and willing to travel. Able to facilitate discussions and give presentations with highly technical content. Presents clearly and informatively. Possess strong analytical aptitude Proficient computer skills with the ability to learn new software Customer focused Strong time management and organizational skills Ability to multi-task and to work in dynamic business environment; Adaptable to change Self-motivated and results oriented; Ability to use judgement and make decisions independently Teamwork oriented to resolve problems and achieve goals Excellent listening, verbal and written communication skills Fluent in English with advanced reading and writing skills German Language skills would be a plus. Visa holders/English as Second Language (ESL) individuals must take TOEFL exam and score above passing grade. ORGANIZATIONAL RELATIONSHIPS: This position reports to the Service Engineering Manager. Coordinates related activities with service sales, field service, purchasing and customers. There are no supervisory responsibilities assigned to this position. MISCELLANEOUS Performs other duties as required or assigned, which are reasonably within the scope of the duties in this job classification. Company Description ANDRITZ Schuler Incorporated, headquartered in Canton, Michigan represents the Schuler Group in North America. We offer sales management and project coordination for state-of-the-art metal forming system solutions. Our after-sales service, spare parts, PM programs, retrofit and rebuild programs are ready to support new and existing metal forming systems. Our goal is to provide our customers with the ability to become more productive, flexible and profitable in todays increasingly competitive environment. We provide comprehensive process knowledge, turnkey installations and technical service throughout the entire life of the system. Company Description ANDRITZ Schuler Incorporated, headquartered in Canton, Michigan represents the Schuler Group in North America. We offer sales management and project coordination for state-of-the-art metal forming system solutions. Our after-sales service, spare parts, PM programs, retrofit and rebuild programs are ready to support new and existing metal forming systems. Our goal is to provide our customers with the ability to become more productive, flexible and profitable in todays increasingly competitive environment. We provide comprehensive process knowledge, turnkey installations and technical service throughout the entire life of the system.

Job Description Job Description About the Role We are hiring a Controls & Automation Engineer to own, program, commission, and operate the NOA-20 pilot anaerobic digester system. This is not a support role. You are responsible for taking an uncommissioned pilot system and delivering stable, continuously operating infrastructure . You will own the controls stack end-to-end-from first power-on through live biological operation-and prepare the system for replication at municipal scale. If you are looking to design in theory and hand off execution, this is not the role. If you want system ownership and real-world impact, read on. General Purpose of Job (Non-Negotiable) The Controls & Automation Engineer is responsible for programming, commissioning, and operating the NOA-20 pilot anaerobic digester, including all control logic, sensors, safety systems, and remote monitoring required for stable biological operation. This role owns the full pilot controls lifecycle and prepares the system for municipal replication. Essential Duties and Responsibilities You will: Program and commission the NOA-20 pilot control system (PLC, sensors, actuators, heaters, mixers, gas handling) Define and implement operating logic for startup, steady-state operation, shutdown, and fault recovery Tune and maintain control parameters to support stable anaerobic digestion during pilot operation Integrate and validate the full sensor suite (temperature, pressure, gas flow, gas composition, liquid levels) Implement safety interlocks and automatic shutdown conditions for pilot-specific risk scenarios Establish remote monitoring, alerting, and data logging Troubleshoot and resolve live system issues during commissioning and operation Document control logic, changes, and pilot performance data Prepare the controls architecture for replication into future units You are the pilot operator of record for controls and automation. Required Qualifications Experience commissioning and operating real-world control systems (industrial, energy, process, or similar) Hands-on PLC programming experience Comfort working on live systems during early-stage testing and iteration Demonstrated ability to take hardware from uncommissioned to stable operation Strong troubleshooting instincts under real operating conditions Willingness to support on-site work during critical pilot windows Preferred Experience Process control for biological, thermal, chemical, or energy systems Sensor integration and data logging systems Remote monitoring and alerting implementations Early-stage pilots, prototypes, or first-of-kind systems Safety-critical or infrastructure-grade systems Additional Information (Read Carefully) This role is directly responsible for the success of the NOA-20 pilot system. Performance in this role determines readiness for municipal deployment and system replication. This is production-critical infrastructure , not an R&D sandbox. Compensation Competitive salary or contract rate (based on experience) Pilot-based milestone compensation may be available Equity consideration for the right operator How to Apply Apply with: Resume highlighting commissioned systems you personally operated Brief note describing a system you took from startup to stable operation Candidates who hesitate when told they will program and run the pilot will not be considered. Company Description N.O.E. (Nature-Origin Energy Infrastructure) designs and operates modular systems that convert organic waste into reliable local energy. We build decentralized infrastructure for cities, farms, and industrial sites-turning waste into power where it's produced. Our systems are engineered for safety, regulatory acceptance, and real-world deployment. Company Description N.O.E. (Nature-Origin Energy Infrastructure) designs and operates modular systems that convert organic waste into reliable local energy. We build decentralized infrastructure for cities, farms, and industrial sites-turning waste into power where it's produced. Our systems are engineered for safety, regulatory acceptance, and real-world deployment.

Job Description Job Description Summary: An energetic and creative role responsible for designing, developing, installing, managing, and maintaining hardware and software systems used to monitor, control, and automate engineering and manufacturing business processes. This blended role requires craft-level skill and agility to deliver controls systems and web-based applications that drive production and operational efficiencies. Essential Duties and Responsibilities include the following . Other duties may be assigned. System Automation & Development: Design, develop, maintain, and modify new and existing control systems and computer programs to automate specific business processes across all aspects of manufacturing operations. Cross-Functional Collaboration: Work collaboratively under general supervision with design engineers, operation engineers, purchasers, IT, and other internal staff to understand operational processes. Requirements & Documentation: Discuss and document application requirements with internal and external customers, transforming business requirements into technical designs, flow charts, and user instructions. Hardware Integration: Establish wiring design, cabinet layouts, and installation of cabinet components (relays, terminal strips, surge suppressors, PLC components, Power Supplies, Fiber Optic Termination, CAT 5, and CAT 6). Component & Protocol Integration: Integrate third-party components including laser sensors, camera systems, proximity switches, and mechanical switches using Modbus, Ethernet, DH/DH+, Device Net, Control Net, and TCP/IP. Project Management: Manage engineering and software projects within cost and time-constrained environments. Compliance & Safety: Troubleshoot technical problems while ensuring compliance with health and safety regulations and quality standards. Handles new and changing priorities with professionalism and is willing to relocate to other business units when urgent needs arise Other Qualifications: Control Disciplines & Platforms: APC, DCS, PLC (Allen Bradley, GE Fanuc, Siemens, Direct Automation), and SCADA. Programming & Scripting Languages: C#, JavaScript Libraries (Vue, Angular, JQuery), HTML, CSS, ASP.NET, Python, PowerShell, .NET Framework, and MVC/Web API. Development Tools & IDEs: Visual Studio, Visual Studio Code, Vuetify, AXIOS, Vuex Store, and NPM. Databases: MS SQL Server, TSQL, and Pervasive. Project Management & Cloud Infrastructure: YouTrack, GitLab (SVN), Git, AWS, and WordPress. Specialized Software & Protocols: CAD, SolidWorks, Signal R, Crystal Reports, Bartender Label Making Software, RFID, and EDI. Robotic Systems: Familiarity with robotic controls and single/multi-axis linear actuated robotic transfer systems. Education and/or Experience: Bachelor's degree (B. S.) from four-year college or university in Electrical Computer, or Mechanical Engineering, Undergraduate projects in automation a plus. 1-5 years' experience desired. Computer Skills: Must be very capable for MS Office Suite of products. Ideal candidate would also be familiar with various methods of robotic automation, single and multi-axis linear actuated robotic transfer systems. Company Description THE G.A. RICHARDS GROUP The G. A. Richards Group consists of several Michigan-based operations that each engineer and build components for various global manufacturers. With 100 years of experience, we compete across the general industrial and office furniture market. We provide the necessary input to our customers that optimizes component design for our manufacturing processes. Company Description THE G.A. RICHARDS GROUP The G. A. Richards Group consists of several Michigan-based operations that each engineer and build components for various global manufacturers. With 100 years of experience, we compete across the general industrial and office furniture market. We provide the necessary input to our customers that optimizes component design for our manufacturing processes.

Job Description Job Description Job description As a Controls Systems Engineer, you will support, maintain, and improve the automation, electrical controls, industrial networking, and manufacturing information systems across the facility. Your primary focus will be on PLCs, HMIs, drives, SCADA systems, and industrial networking, with a strong emphasis on troubleshooting and continuous improvement. You'll work closely with Operations, Maintenance, Engineering, IT, contractors, and OEMs, and you'll spend frequent time on the production floor diagnosing and resolving equipment issues. Key Responsibilities: Industrial Automation & Controls Design, program, troubleshoot, modify, and maintain Allen Bradley ControlLogix and CompactLogix PLCs Maintain and troubleshoot Allen Bradley PowerFlex Variable Frequency Drives (VFDs) Maintain and troubleshoot Allen Bradley PanelView HMIs Support servo systems, motion controls, and associated automation equipment Maintain industrial Ethernet communication networks Modify PLC and HMI programs to improve equipment reliability and functionality Implement machine safety logic, interlocks, and control strategies Diagnose and resolve electrical, controls, instrumentation, communications, and automation faults Support installation, startup, commissioning, and validation of new equipment and control systems Develop and maintain standardized programming practices, electrical documentation, and control narratives Maintain backups and revision control of PLC, HMI, SCADA, and drive programs SCADA & Manufacturing Systems Develop, maintain, and improve Ignition applications Create dashboards, alarm management systems, reports, and historian configurations Configure user security and role based access controls Develop scripting and automation within Ignition Support manufacturing data acquisition and visualization initiatives Troubleshoot data collection, historian performance, and system integration issues SQL & ERP Integration Maintain SQL databases supporting manufacturing operations Develop SQL queries, stored procedures, reports, and data analytics tools Interface production equipment with SQL based ERP and business systems Support manufacturing KPI reporting, production analytics, and operational decision making Troubleshoot data integrity and communication issues between manufacturing equipment and enterprise systems Industrial Networking & Cybersecurity Support industrial automation networks integrated with corporate IT infrastructure utilizing dedicated VLANs Configure, maintain, and troubleshoot managed Ethernet switches, Ethernet/IP communications, industrial network devices, VLAN communications, and overall network reliability and performance Coordinate with Corporate IT regarding cybersecurity, firewall configurations, network architecture, and system updates Maintenance & Operations Support Actively participate in troubleshooting and resolving equipment failures alongside maintenance technicians, engineers, and operations personnel Lead root cause investigations for recurring equipment and process issues Develop corrective actions and long term solutions to eliminate repetitive failures Create preventive and predictive maintenance strategies for automation and controls systems Track equipment downtime, failure frequencies, and reliability metrics Provide technical training and mentorship to maintenance personnel and electrical trades Engineering & Continuous Improvement Lead controls modernization, automation upgrades, and continuous improvement projects Evaluate obsolete hardware and develop replacement and migration strategies Support capital projects from concept development through commissioning and startup Review and participate in equipment modifications and capital installations while ensuring compliance with applicable engineering standards Facilitate risk assessments, value analyses, and engineering studies to support repair, replacement, or redesign decisions Manage contractor and OEM activities during equipment repairs, upgrades, and installations Develop engineering solutions that improve safety, reliability, productivity, quality, and operational efficiency Required Qualifications: Bachelor's degree in Electrical Engineering, Controls Engineering, Computer Engineering, or a related engineering discipline; or a Licensed Journeyman Electrician with advanced PLC/Automation certification and equivalent industrial experience Minimum 5 years of industrial automation and controls experience in a manufacturing environment Experience programming Allen Bradley PLC platforms, including ControlLogix and CompactLogix Experience with Allen Bradley PowerFlex drives Experience developing and troubleshooting HMI systems Experience with Ignition SCADA Strong SQL database knowledge and development experience Experience integrating manufacturing equipment with ERP and manufacturing systems Knowledge of Ethernet/IP and industrial networking systems Strong electrical and controls troubleshooting skills Excellent communication, organizational, and project management skills Preferred Qualifications: Experience in metals manufacturing or other continuous manufacturing operations Experience with Rockwell Studio 5000 Experience with FactoryTalk products Experience with OPC UA communications Knowledge of industrial cybersecurity best practices Experience with SQL Server Reporting Services (SSRS), Microsoft Power BI, and Microsoft Fabric Understanding of ISA 95 manufacturing architecture Company Description United Employment Group, Inc. is a search and placement firm specializing in Concrete Products and Construction, Metals, Refrigeration, Engineering/Surveying and Plastic Industries. Company Description United Employment Group, Inc. is a search and placement firm specializing in Concrete Products and Construction, Metals, Refrigeration, Engineering/Surveying and Plastic Industries.

Job Description Job Description This is a HYBRID or REM OTE role for candidates located in MN or WI. Do you want to be a vital part of a successful multi-disciplined team? At Cybertrol, you will apply your skills in a culture that focuses on commitment to high quality solutions for our customers while emphasizing personal and professional growth for our employees. Our core values are reflected in everything we do. Our dedication to being "Passionate," "Authentic," and "Willing to Help" makes a significant impact on our work culture and the success of our projects. ABOUT CYBERTROL Cybertrol Engineering creates and delivers custom-engineered automation hardware and software solutions to manufacturing customers throughout the upper Midwest and across the world. The firm is privately owned, headquartered in Minneapolis, and has additional offices in Madison and Marshfield, WI. There is an extraordinarily strong engineering culture that emphasizes both personal and professional growth along with a commitment to providing high-quality solutions, including: plant-wide automation, information, and industrial IT (Information Technology) infrastructure; custom control panel design and fabrication; and upgrades of obsolete automation systems. Job Responsibilities In this role, you will be directly responsible for developing and implementing PLC/HMI (Programmable Logic Controllers/Human Machine Interface) code, including simulation and process commissioning at customer sites. As part of this work, you will create clear and well-structured Functional Specifications and the required PLC/HMI programs working in a team as a contributor or technical lead. You will also partner with a team of Digital Manufacturing, Hardware, and Industrial IT engineers to deliver comprehensive projects that meet customer requirements. During these projects, you will become a trusted consultant for Cybertrol's customers. Some examples of specific Industrial Controls & Systems Integration Engineer responsibilities include: Engage directly with the customer to develop a complete understanding of the customer and their needs and create a Functional Specification of the full deliverable. Maintain customer contact throughout the life of the project and for some time after commissioning. Develop the PLC/HMI code in a team environment in a modern software framework. Ensure that quality processes have been followed to deliver zero-defect code to the customer during site installation. Work independently as required to deliver solutions in the area of subject matter expertise. Provide technical leadership as required, including system-level thinking and problem-solving techniques. Working with multiple disciplines and trades while leading the commissioning of projects. Up to 25% travel may be required. This travel includes product lifecycle, trade shows, or other product related travel. A valid driver's license is required. Required Qualifications B.S. in Engineering (Electrical, Computer, Mechanical, or Chemical) or related engineering field with 5 years minimum related and relevant experience in industrial automation OR Associate Degree in Engineering Technology (Electrical, Computer, IT, or Electro-Mechanical) or a related engineering technology field with 5 years minimum related and relevant experience in industrial automation. Technical leadership capability to guide, and coach team members working on complex projects. Proficient in programming and delivering projects in a team environment. Strong written and oral communication skills. Curiosity and agility in problem solving when presented with a new challenge. Focus and tenacity when given a challenge to see it through. Goal oriented with the strong desire to learn new technologies and concepts. Desired Qualifications Six-Sigma or Lean experience. Experience working around live industrial control panels and components. Experience with Agile Scrum development processes. Experience with the following technologies: PLC platforms such as Rockwell Automation, ControlLogix, Siemens S7, etc. Automatic PLC code generation tools such as Rockwell Automation ACM. Stand-alone and distributed HMI/SCADA platforms such as FTView SE/ME, Siemens WinCC, Wonderware Intouch/System Platform, Ignition, etc. Legacy PLCs and HMI/SCADA platforms. VFDs, Process Instrumentation, Robotics/Servo Control, Valve Control, etc. Safety Control Systems - PLCs and Relays. Industrial networks for device control such as Ethernet/IP, Profibus PA/DP, ASi, IOLink, HART, DeviceNet, etc. PHYSICAL REQUIREMENTS & WORKING CONDITIONS Office Work: Office desk/cubicle environment Extensive computer use Occasional Control panel IO powered checkouts in panel shop or customer site Site Work: Up to 25% travel to industrial manufacturing facilities. Typical locations are in North America. Rarely travel to other continents. Overnight travel from a few days to several days at a time. Travel duration rarely exceeds twelve days in a row. Ability to consistently lift 50 lbs. On-Site working conditions may include: Work around construction equipment and personnel. Work around production equipment and production personnel. Work in hot or cold areas. Work in noisy areas. Work up and down stairs, indoors and outdoors. Electrical/Instrumentation Device Checkout and Troubleshooting. Includes voltage testing, equipment troubleshooting on a ladder, and light electrical assembly - signal wiring in control panels/instruments. Working and interfacing with operations, engineering, equipment supply, and construction personnel. Typical Personnel Protective Equipment (PPE) Required: Safety Glasses, Steel Toed shoes, hearing protection, and electrical safety PPE. Employees must comply with customer specific requirements and PPE. Work may include working weekends, holidays, nightshift, and extended hours to meet deadlines and commissioning requirements. Occasionally on-site work can be 12+ hours/day. Cybertrol offers a discretionary bonus to all employees, based on company and personal performance. In addition, all full-time employees are eligible for a variety of benefits including health insurance coverage, life and disability insurance, 401(k), paid holidays and personal paid time off (PTO), supplemental insurance plans, and education reimbursement. Cybertrol is committed to equal employment opportunities for all applicants and employees. Applicants will receive consideration for employment regardless of veteran status, race, color, religion, sex, marital status, national origin, physical or mental disability, age and/or any other protected status as required by law.

Job Description Job Description BEPC is actively looking for Robotics Automation Engineer (Research and Early Development) in the Tucson, Arizona area! W2 Contract - 12 months with possible extensions! Benefits include medical, dental, vision, and life insurance Pay Rate: $55.00 - $65.00 /hour - Determined based on experience (Paid Weekly) Work Model: Onsite Note : This is a W2 only role - C2C, C2H will not be considered Summary of the Role: BEPC is seeking a highly motivated Robotics Automation Engineer (Research and Early Development) to join our client's site in Tucson, Arizona. This role will support research engineering projects by applying diversified knowledge of design principles, practices, and implementation within complex systems and assignments. General responsibilities include concept generation, prototyping, detailed design, and testing to assess performance against project objectives. The engineer will work as part of an agile research engineering team, make independent decisions, and exercise technical judgment to achieve generally defined project goals. Designs will be iterated based on feedback and user testing. The primary focus is prototyping and integrating motion-control and robotics systems, using machine vision for calibration, and working with general robotics and physical AI. Summary of Duties and Responsibilities: Apply advanced engineering knowledge to research projects, typically related to process automation and integration. Participate in defining new components, products, or processes, typically for pathology laboratory applications. Create potentially patentable components, systems, or processes. Receive general direction and exercise considerable discretion regarding work details. Perform simulations, analyses, and experiments to test hypotheses related to project outcomes. Design, build, and test prototype hardware and software systems to achieve defined goals. Prepare and deliver presentations of project results and present data to diverse audiences. Participate in project planning as part of a cross-functional, agile technical team. Perform other duties as assigned by management. Qualifications: Bachelor's degree or equivalent in a directly related discipline with eight years of related experience; or Master's degree in a directly related discipline with four years of related experience; or PhD in a directly related discipline with two years of related experience. Expert knowledge of robotic or mechatronic engineering principles and concepts, including motion control, sensing, and coordinate systems. Creative and independent thinker capable of working in a research setting. Strong problem-solving skills and willingness to learn. Excellent communication, collaboration, and interpersonal skills. Hands-on assembly experience with robotics and automation systems. Experience with mechanical, electrical, and software prototyping. Experience with robot software. Experience with motion-control systems, including stepper systems, servo controls, encoders, and feedback. Experience with machine vision for object detection and/or robot guidance. Experience with electronic controls, including PID control, PLCs, and industrial controls. Experience with industrial communication protocols, including PROFIBUS, EtherCAT, PROFINET, and RS-485. Preferred Qualifications: Bachelor's degree in engineering, preferably robotics. Experience with ABB RobotStudio. Experience with CAD software, preferably SolidWorks. Experience in the diagnostic industry or a pathology laboratory is beneficial but not required. Experience with industrial networks, including switches, Fortinet, routers, and TCP/IP. Experience with robotic calibration through machine vision, including fiducials, ArUco tags, and AprilTags. About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Apply Now! Qualified candidates are encouraged to apply by submitting an up-to-date resume that highlights how your experience aligns with the role. Please include specific examples that demonstrate your qualifications. We look forward to connecting with you! Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth. Company Description About BEPC BEPC Inc., founded in 2007, is a 100% employee-owned company providing top-tier consulting and staffing solutions across industries like technology, engineering, manufacturing, and project management. At BEPC, we are driven by innovation and a commitment to excellence. We take pride in fostering a collaborative and innovative environment where our team members thrive. With competitive benefits, including medical, dental, vision, and life insurance, BEPC is dedicated to supporting our employees' personal and professional growth.

Job Description Job Description This is a HYBRID or REM OTE role for candidates located in MN or WI. Do you want to be a vital part of a successful multi-disciplined team? At Cybertrol, you will apply your skills in a culture that focuses on commitment to high quality solutions for our customers while emphasizing personal and professional growth for our employees. Our core values are reflected in everything we do. Our dedication to being "Passionate," "Authentic," and "Willing to Help" makes a significant impact on our work culture and the success of our projects. ABOUT CYBERTROL Cybertrol Engineering creates and delivers custom-engineered automation hardware and software solutions to manufacturing customers throughout the upper Midwest and across the world. The firm is privately owned, headquartered in Minneapolis, and has additional offices in Madison and Marshfield, WI. There is an extraordinarily strong engineering culture that emphasizes both personal and professional growth along with a commitment to providing high-quality solutions, including: plant-wide automation, information, and industrial IT (Information Technology) infrastructure; custom control panel design and fabrication; and upgrades of obsolete automation systems. Job Responsibilities In this role, you will be directly responsible for developing and implementing PLC/HMI (Programmable Logic Controllers/Human Machine Interface) code, including simulation and process commissioning at customer sites. As part of this work, you will create clear and well-structured Functional Specifications and the required PLC/HMI programs working in a team as a contributor or technical lead. You will also partner with a team of Digital Manufacturing, Hardware, and Industrial IT engineers to deliver comprehensive projects that meet customer requirements. During these projects, you will become a trusted consultant for Cybertrol's customers. Some examples of specific Industrial Controls & Systems Integration Engineer responsibilities include: Engage directly with the customer to develop a complete understanding of the customer and their needs and create a Functional Specification of the full deliverable. Maintain customer contact throughout the life of the project and for some time after commissioning. Develop the PLC/HMI code in a team environment in a modern software framework. Ensure that quality processes have been followed to deliver zero-defect code to the customer during site installation. Work independently as required to deliver solutions in the area of subject matter expertise. Provide technical leadership as required, including system-level thinking and problem-solving techniques. Working with multiple disciplines and trades while leading the commissioning of projects. Up to 25% travel may be required. This travel includes product lifecycle, trade shows, or other product related travel. A valid driver's license is required. Required Qualifications B.S. in Engineering (Electrical, Computer, Mechanical, or Chemical) or related engineering field with 5 years minimum related and relevant experience in industrial automation OR Associate Degree in Engineering Technology (Electrical, Computer, IT, or Electro-Mechanical) or a related engineering technology field with 5 years minimum related and relevant experience in industrial automation. Technical leadership capability to guide, and coach team members working on complex projects. Proficient in programming and delivering projects in a team environment. Strong written and oral communication skills. Curiosity and agility in problem solving when presented with a new challenge. Focus and tenacity when given a challenge to see it through. Goal oriented with the strong desire to learn new technologies and concepts. Desired Qualifications Six-Sigma or Lean experience. Experience working around live industrial control panels and components. Experience with Agile Scrum development processes. Experience with the following technologies: PLC platforms such as Rockwell Automation, ControlLogix, Siemens S7, etc. Automatic PLC code generation tools such as Rockwell Automation ACM. Stand-alone and distributed HMI/SCADA platforms such as FTView SE/ME, Siemens WinCC, Wonderware Intouch/System Platform, Ignition, etc. Legacy PLCs and HMI/SCADA platforms. VFDs, Process Instrumentation, Robotics/Servo Control, Valve Control, etc. Safety Control Systems - PLCs and Relays. Industrial networks for device control such as Ethernet/IP, Profibus PA/DP, ASi, IOLink, HART, DeviceNet, etc. PHYSICAL REQUIREMENTS & WORKING CONDITIONS Office Work: Office desk/cubicle environment Extensive computer use Occasional Control panel IO powered checkouts in panel shop or customer site Site Work: Up to 25% travel to industrial manufacturing facilities. Typical locations are in North America. Rarely travel to other continents. Overnight travel from a few days to several days at a time. Travel duration rarely exceeds twelve days in a row. Ability to consistently lift 50 lbs. On-Site working conditions may include: Work around construction equipment and personnel. Work around production equipment and production personnel. Work in hot or cold areas. Work in noisy areas. Work up and down stairs, indoors and outdoors. Electrical/Instrumentation Device Checkout and Troubleshooting. Includes voltage testing, equipment troubleshooting on a ladder, and light electrical assembly - signal wiring in control panels/instruments. Working and interfacing with operations, engineering, equipment supply, and construction personnel. Typical Personnel Protective Equipment (PPE) Required: Safety Glasses, Steel Toed shoes, hearing protection, and electrical safety PPE. Employees must comply with customer specific requirements and PPE. Work may include working weekends, holidays, nightshift, and extended hours to meet deadlines and commissioning requirements. Occasionally on-site work can be 12+ hours/day. Cybertrol offers a discretionary bonus to all employees, based on company and personal performance. In addition, all full-time employees are eligible for a variety of benefits including health insurance coverage, life and disability insurance, 401(k), paid holidays and personal paid time off (PTO), supplemental insurance plans, and education reimbursement. Cybertrol is committed to equal employment opportunities for all applicants and employees. Applicants will receive consideration for employment regardless of veteran status, race, color, religion, sex, marital status, national origin, physical or mental disability, age and/or any other protected status as required by law.

Job Description Job Description Controls Engineer (Automation & PLC Programming) Location: Macomb, MI Schedule: 7:00 AM start Travel: 30-35% (domestic; occasional international travel possible) Position Summary We are seeking a Controls Engineer to support the design, programming, integration, and commissioning of automated assembly equipment. This role plays a key part in the full project lifecycle-from concept and software development through on-site startup, buyoff, and production support at customer facilities. The ideal candidate has hands-on experience with PLC logic, HMI development, CNC programming, and system commissioning in a manufacturing environment. Key Responsibilities Design, program, test, document, and commission PLC and HMI software for automated systems Support installation, startup, troubleshooting, and production ramp-up at customer sites Configure drives and integrate hardware and software control systems Lead programming, commissioning, and software testing phases of automation projects Collaborate with cross-functional engineering teams throughout the project lifecycle Assist in developing engineering standards to ensure consistency and quality Research and apply new automation technologies to improve system performance Review program metrics and provide recommendations to improve operational efficiency Represent the organization professionally during customer interactions, commissioning, and buyoff Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, Systems Engineering, or related field Minimum 2-3 years of relevant experience (5+ years preferred) Strong experience with PLC programming, HMI development, and CNC programming Knowledge of electrical power and distribution systems Experience supporting automation systems in manufacturing environments Proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook, Project) Ability to travel up to 35% (with potential to increase depending on project needs) Must meet Export Control requirements (U.S. Person as defined by 22 C.F.R.) Preferred Skills Experience with C# programming Strong troubleshooting and problem-solving skills Experience with system integration and complex automated equipment Understanding of project execution and lifecycle management Strong communication and teamwork skills Ability to adapt to changing priorities and customer environments Why This Role Hands-on involvement with advanced automated manufacturing systems Exposure to both domestic and international projects Opportunity to lead critical commissioning and startup phases Competitive hourly pay and impactful engineering work Company Description Branex Group is a Minority-owned Technical Staffing firm headquartered in Auburn Hills, MI. We are a Certified Women's Owned Business through the Women's Business Enterprise National Council (WBENC). We specialize in Engineering, Information Technology, Robotics, Human Resources, and Finance opportunities across the United States. Branex Group is committed to being an Equal Employment Opportunity Employer and fostering a diverse and inclusive workplace. We ensure all applicants and employees are considered without discrimination or harassment based on race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran status, disability status, genetics, or any other protected characteristic by State and Federal laws. Branex Group offers the following benefits: - Medical Insurance - Dental Insurance - Vision insurance - Paid time off - 401(k) This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Company Description Branex Group is a Minority-owned Technical Staffing firm headquartered in Auburn Hills, MI. We are a Certified Women's Owned Business through the Women's Business Enterprise National Council (WBENC). We specialize in Engineering, Information Technology, Robotics, Human Resources, and Finance opportunities across the United States. Branex Group is committed to being an Equal Employment Opportunity Employer and fostering a diverse and inclusive workplace. We ensure all applicants and employees are considered without discrimination or harassment based on race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran status, disability status, genetics, or any other protected characteristic by State and Federal laws. Branex Group offers the following benefits: - Medical Insurance - Dental Insurance - Vision insurance - Paid time off - 401(k) This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Description Job Title: AV Technician Location: Washington, DC Type: Contract Compensation: $36.80 Work Model: Onsite Hours: 40.0 Security Clearance: Ability to obtain and maintain Public Trust (or higher if required) Overview This is an onsite Audio Visual (AV) and Video Teleconferencing (VTC) support role responsible for maintaining conference room technology, supporting live events, and ensuring seamless collaboration experiences across Microsoft Teams, Webex, and other AV platforms. Responsibilities Proactively inspect, configure, and maintain AV/VTC equipment in meeting rooms, auditoriums, and multipurpose rooms. Manage deployment, setup, and relocation of AV/VTC components to support operational and event requirements. Troubleshoot front-end AV/VTC hardware and software issues and restore services with minimal disruption. Perform routine readiness checks to ensure monitors, microphones, conference phones, and related room systems remain fully operational. Provide user-facing support for collaboration tools, including Webex and Microsoft Teams. Field and resolve user questions on AV/VTC usage, meeting startup, content sharing, and audio/video performance. Support conference and hybrid meeting connectivity and coordinate escalations for unresolved issues. Communicate service updates and usage guidance to end users to improve collaboration outcomes. Support production of live events, including town halls, commission meetings, and other high-visibility sessions. Execute live video/audio support activities and assist with webcast or streaming operations. Coordinate with internal stakeholders and third-party providers for services such as captioning and interpretation support. Perform post-production editing for recorded events and deliver high-quality final media outputs. Conduct training sessions on selection, use, and design of audiovisual materials and presentation equipment. Develop manuals, workbooks, and user-facing reference materials to support AV/VTC operations. Create practical job aids for common room technologies and collaboration workflows. Capture recurring issues and recommend process improvements to strengthen AV/VTC service delivery. Requirements Citizenship/Work Authorization: Must meet contract requirements. Clearance: Ability to obtain and maintain Public Trust (or higher if required). Education: Bachelor's degree in a relevant field (e.g., Information Technology, Computer Science, Engineering). Minimum of 5 years of experience providing front-end AV/VTC support in enterprise or government environments. Hands-on experience managing, deploying, and troubleshooting AV/VTC equipment. Demonstrated skills and knowledge to operate AV/VTC systems, including live broadcasts and post-production editing. AV/VTC system operation and troubleshooting across conference rooms, auditoriums, and multipurpose spaces. Webex and Microsoft Teams support for meetings and collaboration. Live broadcast, streaming/webcast support, and post-production video editing. End-user training delivery and development of manuals, texts, and workbooks. Preventive AV equipment management, issue triage, and service restoration. Experience supporting federal agency executive events, hearings, or public-facing broadcast sessions (preferred). AVIXA CTS certification (CTS-I or CTS-D preferred). Experience coordinating live captioning and sign-language interpretation support (preferred). Familiarity with ITSM/ticketing workflows (e.g., ServiceNow) and SLA-driven support in PWS-aligned environments (preferred). Experience with AV refresh, upgrade, and modernization efforts in secured environments (preferred). AVIXA CTS, CTS-I/CTS-D (preferred). Dante Level 1 or Level 2 when supporting Dante-based audio transport environments (preferred). System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref:

Job Description Job Description Description: General Kinematics is the premier manufacturer of vibrating equipment for the processing of bulk materials. From vibratory feeders to entire process systems, General Kinematics creates the solutions customers require to process even the most difficult materials. We are currently looking for a qualified Industrial Controls Designer to join our team. Design: Collaborate with cross-functional teams, including mechanical engineers, electrical engineers, and project managers, to understand project requirements and design control systems that meet those requirements. Develop detailed control system designs, including schematic diagrams, wiring layouts, and panel designs, using industry-standard design tools and software. Select third-party companies as outside vendors for controls support and act as the company's liaison, overseeing work quality, accuracy, and timeliness. Select appropriate hardware components, such as PLCs (Programmable Logic Controllers), HMIs (Human-Machine Interfaces), sensors, actuators, and communication devices, to build effective control solutions. Program and configure PLCs and HMIs to create logic sequences, control algorithms, and user interfaces that facilitate system operation, monitoring, and troubleshooting. Participate in the testing and commissioning of control systems, ensuring proper functionality, responsiveness, and adherence to safety regulations. Collaborate with software engineers to integrate control systems with higher-level software and network infrastructures. Provide technical support to field service teams during the installation, startup, and maintenance of control systems. Stay current with industry trends and advancements in control system technologies, incorporating best practices and innovative solutions into design processes. Requirements: Proficiency in control system design software and tools, such as AutoCAD, EPLAN, Siemens TIA Portal, Rockwell Studio 5000, etc. Strong understanding of PLC programming languages (Ladder Logic, Function Block Diagrams, Structured Text) and HMI development. Familiarity with industrial communication protocols (Modbus, Ethernet/IP, Profibus, etc.) and networking concepts. Solid knowledge of electrical design principles, circuit analysis, and instrumentation. Ability to interpret P&IDs and collaborate with other engineering disciplines. Strong problem-solving skills and attention to detail to identify and rectify control system issues. Excellent communication skills to convey complex technical information Understanding of National Electrical Code (NEC) safety standards and experience designing systems in compliance with relevant regulations. Professional certifications (such as Certified Automation Professional, Siemens Certified Programmer) are a plus. Ability to work independently and as part of a team, managing multiple projects and priorities simultaneously. Travel: Dependent on workload and will be job-specific Estimated at 25% in a given month BACKGROUND/EXPERIENCE: To qualify for this position, you will need to have: Proven experience (3 -5 years min) working as a Controls Designer or similar role within the industrial automation or manufacturing sector. Bachelor's Degree in Electrical Engineering preferred, but not required Pay: $95,000 to $110,000 paid annually. The range provided is a guideline and not a guarantee of compensation. Other factors that are involved in offer decisions include, and are not limited to a candidate's experience, qualifications, geography, and internal equity. Benefits: The position also comes with an annual profit-sharing incentive bonus payment. Our benefit programs provide choice and flexibility to meet the needs of you and your family. This includes health and well-being, financial planning tools, career development, PTO, and more. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. EOE M/F/D/V Company Description General Kinematics is the premier manufacturer of vibrating equipment for the processing of bulk materials. From vibratory feeders to entire process systems, General Kinematics creates the solutions customers require to process even the most difficult materials. Our systems team works in Cedar Rapid and we manufacture onsite in Crystal Lake, IL. Company Description General Kinematics is the premier manufacturer of vibrating equipment for the processing of bulk materials. From vibratory feeders to entire process systems, General Kinematics creates the solutions customers require to process even the most difficult materials. Our systems team works in Cedar Rapid and we manufacture onsite in Crystal Lake, IL.

Job Description Job Description ISG - EPlan Controls Hardware Engineer Opportunities near Sterling Heights, MI! Minimal travel, competitive pay rates, work with a great team and start as soon as possible! A multinational company with their customer near Sterling Heights, Michigan is currently seeking an EPlan Controls Hardware Engineer for long-term opportunities with their growing team. These are exciting opportunities for Controls Engineers with solid EPlan experience looking for a position that offers minimal travel, excellent management, career growth, development, and competitive rates. EPlan Controls Hardware Engineers will be working full-time day shift, and rates are anticipated to be between $40-$60/hour (with 1.5 overtime over 40 hours) based on each candidate's experience and education. All well qualified candidates will be considered regardless of pay rate. We offer excellent benefits - including great medical, dental, vision, vacation, and more. Qualified EPlan Controls Hardware Engineers will possess most, if not all, of the following skills and experience: Bachelor's degree in Electrical Engineering or closely related degree. 3+ years of recent/relevant controls hardware engineering and design experience with CNC machinery, powertrain assembly, fluid fill or closely related. Proficiency with electrical hardware design using Eplan is required. Solid knowledge of hardware calculations, such as panel loading, wire sizing, etc. Experience with pneumatics or hydraulic design is strongly preferred, but not required. Travel is anticipated to be a maximum of about 10% overnight for customer meetings and site visits. Trips will be primarily 2-5 days. Must be able to work in the United Stated (no H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, etc.