Job Description Job Description Position: Integrated Photonics Engineer I Position Details Salary Range: $75,000-$95,000 annually. Location (Non-Negotiable): This is an on-site, full-time exempt, entry-level role based in Rome, NY, with work performed at AFRL and the Innovare Advancement Center at the Rome Griffiss Institute campus, working under the guidance of more senior engineers. Candidates must be located, or re-locate, within a commutable distance to Rome, NY by their agreed upon start date. Due to the clearance required for this position, only U.S. citizens are eligible to apply; as outlined in Executive Order 12968: Access to Classified Information, eligibility for access to classified information may only be granted to employees who are United States citizens. Visa sponsorship is not available for this position. Responsibilities and Duties The Integrated Photonics Engineer I supports research conducted by the Technergetics Quantum Team, assisting with the development and characterization of photonic systems for heterogeneous quantum networks, optical sensing and communication, and the enhancement of quantum systems through novel technologies: Assist with independent and team-based research to develop and advance key components of a wide-area, heterogeneous quantum network, under the guidance of senior engineers Assist with the design, simulation, and optimization of integrated photonic devices and circuits tailored for quantum information processing, sensing, and communication applications Support senior engineers in designing photonic circuits that support quantum algorithms and protocols Assist with the integration of photonics with light sources, detectors, and control systems Support system-level design and optimization tasks for data transfer, processing, and quantum entanglement in integrated photonics setups Observe and assist with the tape-out process for integrated photonic circuits under the direction of more senior engineers and fabrication teams Participate in the design and testing of integrated photonic devices, learning to use photonic simulation software (e.g., Ansys Lumerical, COMSOL, or similar) Learn and begin using layout software (e.g., GDSFactory, KLayout, or similar) to support the design of integrated photonic circuits Develop foundational expertise in integrated photonics and quantum technologies through hands-on work and mentorship Education and Certifications: This project requires at minimum a Bachelor's degree from an accredited college or university in physics, applied physics, or closely related technical field. Required Qualifications: 1 year of professional or research experience; relevant internship, thesis, or coursework-based project experience is welcomed in place of professional experience Basic familiarity with photonic device design concepts, gained through coursework, research, or lab experience Willingness to learn photonic device design software (e.g., Lumerical, COMSOL, ADS, or equivalent) on the job Foundational knowledge of quantum optics and quantum information science, gained through academic coursework Strong attention to detail and eagerness to learn integrated photonics fabrication and testing concepts Desired Qualifications: Exposure to integrated photonics fabrication concepts through academic or internship project experience Familiarity with optical testing and characterization techniques (e.g., spectroscopy, microscopy, or interferometry) Coursework or project experience touching quantum algorithms, quantum computing, or quantum communication Demonstrated ability to work well in a collaborative, mentorship-driven team environment Clearance: Applicants selected will be subject to a background check and security investigation and must meet and maintain eligibility requirements for, at minimum, Secret access to classified information. Travel: This position is not expected to require travel. Benefits: Our benefits package includes health, life, disability, dental, and vision insurance coverage and a 401(k) policy with a 3% company contribution & 3% company match. Other perks include generous Paid Time Off (including a PTO "gift day" for your birthday), 11 Federal Holidays per year, three weeks paid maternity/paternity leave, and annual technology "allowances". Even more perks include referral bonuses, professional recognition awards, healthcare stipends, tuition/education reimbursement (once specific requirements are met), and flexible daily start and stop times for most projects and positions. Company Description Technergetics is a US-based company headquartered in Utica, NY, with employees and clients located throughout the country. The Utica/Rome area is a hub of cutting-edge cyber technology research, bolstered by the Griffiss Business & Technology Park's tenants and facilities, including the Air Force Research Lab (AFRL). At Technergetics, we work with a wide variety of technologies, including mobile and web apps, Quantum computing, machine learning and artificial intelligence, AI-enabled edge devices, and many more. Beware of fraudulent job offers and postings! Technergetics will never extend an offer of employment without a thorough interview process involving face to face interviews either in-person or a virtual Teams meeting from an official Technergetics email address ( ). If you receive any correspondence from an email other than , it is a scam. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
09/26/2026
Full time
Job Description Job Description Position: Integrated Photonics Engineer I Position Details Salary Range: $75,000-$95,000 annually. Location (Non-Negotiable): This is an on-site, full-time exempt, entry-level role based in Rome, NY, with work performed at AFRL and the Innovare Advancement Center at the Rome Griffiss Institute campus, working under the guidance of more senior engineers. Candidates must be located, or re-locate, within a commutable distance to Rome, NY by their agreed upon start date. Due to the clearance required for this position, only U.S. citizens are eligible to apply; as outlined in Executive Order 12968: Access to Classified Information, eligibility for access to classified information may only be granted to employees who are United States citizens. Visa sponsorship is not available for this position. Responsibilities and Duties The Integrated Photonics Engineer I supports research conducted by the Technergetics Quantum Team, assisting with the development and characterization of photonic systems for heterogeneous quantum networks, optical sensing and communication, and the enhancement of quantum systems through novel technologies: Assist with independent and team-based research to develop and advance key components of a wide-area, heterogeneous quantum network, under the guidance of senior engineers Assist with the design, simulation, and optimization of integrated photonic devices and circuits tailored for quantum information processing, sensing, and communication applications Support senior engineers in designing photonic circuits that support quantum algorithms and protocols Assist with the integration of photonics with light sources, detectors, and control systems Support system-level design and optimization tasks for data transfer, processing, and quantum entanglement in integrated photonics setups Observe and assist with the tape-out process for integrated photonic circuits under the direction of more senior engineers and fabrication teams Participate in the design and testing of integrated photonic devices, learning to use photonic simulation software (e.g., Ansys Lumerical, COMSOL, or similar) Learn and begin using layout software (e.g., GDSFactory, KLayout, or similar) to support the design of integrated photonic circuits Develop foundational expertise in integrated photonics and quantum technologies through hands-on work and mentorship Education and Certifications: This project requires at minimum a Bachelor's degree from an accredited college or university in physics, applied physics, or closely related technical field. Required Qualifications: 1 year of professional or research experience; relevant internship, thesis, or coursework-based project experience is welcomed in place of professional experience Basic familiarity with photonic device design concepts, gained through coursework, research, or lab experience Willingness to learn photonic device design software (e.g., Lumerical, COMSOL, ADS, or equivalent) on the job Foundational knowledge of quantum optics and quantum information science, gained through academic coursework Strong attention to detail and eagerness to learn integrated photonics fabrication and testing concepts Desired Qualifications: Exposure to integrated photonics fabrication concepts through academic or internship project experience Familiarity with optical testing and characterization techniques (e.g., spectroscopy, microscopy, or interferometry) Coursework or project experience touching quantum algorithms, quantum computing, or quantum communication Demonstrated ability to work well in a collaborative, mentorship-driven team environment Clearance: Applicants selected will be subject to a background check and security investigation and must meet and maintain eligibility requirements for, at minimum, Secret access to classified information. Travel: This position is not expected to require travel. Benefits: Our benefits package includes health, life, disability, dental, and vision insurance coverage and a 401(k) policy with a 3% company contribution & 3% company match. Other perks include generous Paid Time Off (including a PTO "gift day" for your birthday), 11 Federal Holidays per year, three weeks paid maternity/paternity leave, and annual technology "allowances". Even more perks include referral bonuses, professional recognition awards, healthcare stipends, tuition/education reimbursement (once specific requirements are met), and flexible daily start and stop times for most projects and positions. Company Description Technergetics is a US-based company headquartered in Utica, NY, with employees and clients located throughout the country. The Utica/Rome area is a hub of cutting-edge cyber technology research, bolstered by the Griffiss Business & Technology Park's tenants and facilities, including the Air Force Research Lab (AFRL). At Technergetics, we work with a wide variety of technologies, including mobile and web apps, Quantum computing, machine learning and artificial intelligence, AI-enabled edge devices, and many more. Beware of fraudulent job offers and postings! Technergetics will never extend an offer of employment without a thorough interview process involving face to face interviews either in-person or a virtual Teams meeting from an official Technergetics email address ( ). If you receive any correspondence from an email other than , it is a scam. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.
Job Description Job Description E INK CORPORATION At E Ink Corporation, innovation is at the heart of everything we do. Founded in 1997 as a spin-off from the MIT Media Lab, we introduced electronic paper technology and have grown into the global leader in energy-efficient digital display solutions. Today, our technology is trusted by customers around the world and powers millions of devices, from eReaders and electronic shelf labels to digital signage, transportation displays, healthcare solutions, and emerging IoT applications. What sets us apart isn't just our technology-it's our people. We believe the best ideas come from collaboration, curiosity, and a willingness to challenge what's possible. Our teams work across disciplines and around the globe to solve complex problems, develop groundbreaking products, and create technologies that make information more accessible while supporting a more sustainable future. When you join E Ink, you become part of a company with a rich history of innovation and a shared commitment to shaping what's next. Whether you're launching your career or bringing years of experience, you'll have the opportunity to make a meaningful impact while growing alongside talented colleagues in an inclusive and collaborative environment. THE ROLE E Ink's Product Development Group is looking for a Coating Engineer to join the Coating and Lamination Process development team. As a member of this team this individual will work on next generation ePaper products that support our mission of Making Surfaces Smarter and Green. This individual will be responsible for developing innovative coating and lamination solutions for E Ink's unique materials. Working within cross-functional project teams, this individual will be responsible for planning and executing complex pilot and production-scale experiments to develop creative coating and lamination solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position include, but are not limited to, the following: Implement a wide range of coating application methods to support new design and materials introduction into next generation ePaper devices Interact across multiple groups to understand coating requirements of new materials, including fluids and coating substrate materials; develop and demonstrate process capabilities for these requirements Accelerate transition of coating technologies from research to development by collaborating with research engineers to resolve scale-up challenges and align early-on process feasibility Demonstrate fundamental relationships between process variables and device performance, with goal of using what is learned for scale-up to production scale Design, manage and coordinate experiments on pilot-scale roll-to-roll coating equipment Conduct film characterizations such as profilometry, optical, mechanical, and analytical to verify experimental formulations as they relate to electro-optical metrics and coating-related defects Interact with technicians, perform process troubleshooting, and issue reports Document and transfer processes from Development to Production environment SUPERVISORY RESPONSIBILITIES This position has no direct supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform the essential functions of the position. The qualifications listed below are representative of the knowledge, skills, education, experience, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. BS/MS/PhD in Chemical, Material Science or Mechanical Engineering, with a minimum of 3 years of industrial experience in roll-to-roll processes and coating technology Knowledge and experience in a wide range of coating applications such as Slot Die, Gravure, Blade, and multilayer coating techniques Hands-on experience with process control systems for coating or roll-to-roll manufacturing processes (e.g., PLCs, feedback control, sensor integration) highly desired Hands on experience in 3D modeling, tool design and fabrication Experience in process design, hardware testing, and equipment troubleshooting Familiarity with rheological and mechanical measurement techniques Knowledge of Design of Experiments and Statistical Analysis Proficiency with Microsoft Office software, JMP or other statistical analysis tools Excellent written and verbal communication skills, a strong sense of urgency and a performance metrics-driven style Sound analytical skills, attention to detail, and strong problem-solving skills Ability to manage multiple priorities, willingness to learn new skills and be flexible COMPENSATION & BENEFITS The anticipated annual base salary range for this position is $80,000- $110,000, not including variable pay. The final offer will be based on factors including, but not limited to, the candidate's experience, education, skills, qualifications, and location. In addition to a competitive base salary, E Ink offers a comprehensive benefits package that includes medical, dental, and vision insurance; life and disability coverage; paid time off; and a 401(k) retirement savings plan. Additionally, the position is eligible for our bonus program. PHYSICAL DEMANDS The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. DISCLAIMER: The essential duties and responsibilities described above are intended to provide a general overview of the work performed in this position. They are not intended to be an exhaustive list of all duties, responsibilities, or qualifications. Responsibilities may be modified or assigned at any time to meet business needs, including as a result of reasonable accommodation or other operational requirements.
09/26/2026
Full time
Job Description Job Description E INK CORPORATION At E Ink Corporation, innovation is at the heart of everything we do. Founded in 1997 as a spin-off from the MIT Media Lab, we introduced electronic paper technology and have grown into the global leader in energy-efficient digital display solutions. Today, our technology is trusted by customers around the world and powers millions of devices, from eReaders and electronic shelf labels to digital signage, transportation displays, healthcare solutions, and emerging IoT applications. What sets us apart isn't just our technology-it's our people. We believe the best ideas come from collaboration, curiosity, and a willingness to challenge what's possible. Our teams work across disciplines and around the globe to solve complex problems, develop groundbreaking products, and create technologies that make information more accessible while supporting a more sustainable future. When you join E Ink, you become part of a company with a rich history of innovation and a shared commitment to shaping what's next. Whether you're launching your career or bringing years of experience, you'll have the opportunity to make a meaningful impact while growing alongside talented colleagues in an inclusive and collaborative environment. THE ROLE E Ink's Product Development Group is looking for a Coating Engineer to join the Coating and Lamination Process development team. As a member of this team this individual will work on next generation ePaper products that support our mission of Making Surfaces Smarter and Green. This individual will be responsible for developing innovative coating and lamination solutions for E Ink's unique materials. Working within cross-functional project teams, this individual will be responsible for planning and executing complex pilot and production-scale experiments to develop creative coating and lamination solutions. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position include, but are not limited to, the following: Implement a wide range of coating application methods to support new design and materials introduction into next generation ePaper devices Interact across multiple groups to understand coating requirements of new materials, including fluids and coating substrate materials; develop and demonstrate process capabilities for these requirements Accelerate transition of coating technologies from research to development by collaborating with research engineers to resolve scale-up challenges and align early-on process feasibility Demonstrate fundamental relationships between process variables and device performance, with goal of using what is learned for scale-up to production scale Design, manage and coordinate experiments on pilot-scale roll-to-roll coating equipment Conduct film characterizations such as profilometry, optical, mechanical, and analytical to verify experimental formulations as they relate to electro-optical metrics and coating-related defects Interact with technicians, perform process troubleshooting, and issue reports Document and transfer processes from Development to Production environment SUPERVISORY RESPONSIBILITIES This position has no direct supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform the essential functions of the position. The qualifications listed below are representative of the knowledge, skills, education, experience, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. BS/MS/PhD in Chemical, Material Science or Mechanical Engineering, with a minimum of 3 years of industrial experience in roll-to-roll processes and coating technology Knowledge and experience in a wide range of coating applications such as Slot Die, Gravure, Blade, and multilayer coating techniques Hands-on experience with process control systems for coating or roll-to-roll manufacturing processes (e.g., PLCs, feedback control, sensor integration) highly desired Hands on experience in 3D modeling, tool design and fabrication Experience in process design, hardware testing, and equipment troubleshooting Familiarity with rheological and mechanical measurement techniques Knowledge of Design of Experiments and Statistical Analysis Proficiency with Microsoft Office software, JMP or other statistical analysis tools Excellent written and verbal communication skills, a strong sense of urgency and a performance metrics-driven style Sound analytical skills, attention to detail, and strong problem-solving skills Ability to manage multiple priorities, willingness to learn new skills and be flexible COMPENSATION & BENEFITS The anticipated annual base salary range for this position is $80,000- $110,000, not including variable pay. The final offer will be based on factors including, but not limited to, the candidate's experience, education, skills, qualifications, and location. In addition to a competitive base salary, E Ink offers a comprehensive benefits package that includes medical, dental, and vision insurance; life and disability coverage; paid time off; and a 401(k) retirement savings plan. Additionally, the position is eligible for our bonus program. PHYSICAL DEMANDS The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. DISCLAIMER: The essential duties and responsibilities described above are intended to provide a general overview of the work performed in this position. They are not intended to be an exhaustive list of all duties, responsibilities, or qualifications. Responsibilities may be modified or assigned at any time to meet business needs, including as a result of reasonable accommodation or other operational requirements.
Job Description Job Description Principal GNC Engineer Location: Playa Vista, California (in-person, five days per week) The return lane isn't going to build itself. Come build it with us. Outpost is an orbital logistics company rewriting the rules of global logistics by building reusable Earth-return vehicles that unlock in-space manufacturing, on-orbit warehousing, and 60-minute global delivery through space. Our CarryAll vehicle family returns payloads ranging from 200 kilograms to 10 metric tons, lands within 10 meters of its target, and can then be refurbished and launched again. One vehicle, many missions: responsive logistics and precision delivery for national security; commercial cargo moved with real cadence; R&D payloads flown, tested, and refined across repeatable cycles; and critical aid delivered where roads and runways can't reach. The demand is already here, validated through defense and civil agreements and supported by a growing pipeline of government and commercial customers. We have the customers, the team, and a clear technical path ahead of us. We're building the return lane. Come build it with us The Role Outpost is building vehicles that bring things back from space. Getting mass from orbit to a precise point on the ground is a GNC problem end to end: a deorbit burn that has to hit an entry corridor, a hypersonic entry that has to bleed energy inside structural and thermal limits, and a guided descent that has to land on a target, repeatably, and cheaply enough to do it often. We're hiring a Principal GNC Engineer to own that chain. This is not a role where you hand algorithms over a wall. You'll design the guidance and estimation architecture, write the flight code, put it on hardware, sit through the HIL runs, go out to the drop tests and flight campaigns, and come back with data that changes the design. If you want to see your controller fly within months rather than years, this is that job. Basic Qualifications: Bachelor's degree in a related technical discipline with 5+ years as a GNC or Controls professional or Advanced degree with 3+ years as a GNC or Controls professional Software development experience in C++ and Python. Experience in software tools such as Git, Jira, and CI Pipeline Algorithms on real hardware (e.g. Extended Kalman Filters, LQR) Strong understanding of classical dynamics, modeling and simulation, classical and modern control. Ability to work in a fast paced, autonomously driven atmosphere. Passion for space and the application of advanced estimation and control techniques in this domain Additional Qualifications: Experience with implementing optimal control for burn planning Experience with satellite maneuvering and thruster systems Demonstrated project or professional experience in satellite attitude determination and control Experience in end-to-end development of three axis stabilized spacecraft incorporating momentum, magnetic, and/or propulsive control. Experience with flexible body control, orbital maneuvering, filtering, fault management, software development, and navigation filtering. Responsibilities: Modeling, design, analysis, implementation and test of satellite attitude determination and control (ADCS) algorithms. Hardware performance specification including reaction wheel and torque rod sizing, sensor noise and performance, characteristics, redundancy and fault management. Define and own ADCS requirements definition with electrical and mechanical engineers Implement closed loop pointing, orbit raising, and station keeping algorithms for flight. Analyze platform stability to ensure low jitter of line-of-sight instruments. Develop high fidelity 6 degree of freedom satellite simulations using Python, Matlab or C++. Develop entry guidance, entry corridor and reachability analysis, deorbit burn targeting, aerothermal and load-constrained trajectory shaping. Develop EKF and UKF with GNSS, IMU, air data, radar or laser altimetry, magnetometers, and optical or terrain-relative sensors; sensor error modeling and calibration; GNSS-denied or degraded navigation, including through plasma blackout. Implement control of aerodynamically unstable or marginally stable vehicles, gain scheduling and robust control across wide Mach and dynamic pressure ranges, actuator and effector allocation, autonomous mode sequencing and abort logic. Support flight test campaigns at test sites - test planning, instrumentation requirements, real-time support, and flight data reconstruction. Compensation & Benefits: Salary: Principal: $190,000- $225,00, based on experience Additional Compensation: Annual performance-based bonuses that reward your impact. Shared upside: Meaningful equity in Outpost so you share directly in the value you help create. Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security. PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays. Invest in your future: 401(k) with company match to help you build long-term wealth. Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized. Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure. Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too. Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! You must be a U.S. citizen or lawful permanent resident of the U.S., protected individual as defined by 22 C.F.R. 120.15 , or eligible to obtain the required authorizations from the U.S. Department of State
09/26/2026
Full time
Job Description Job Description Principal GNC Engineer Location: Playa Vista, California (in-person, five days per week) The return lane isn't going to build itself. Come build it with us. Outpost is an orbital logistics company rewriting the rules of global logistics by building reusable Earth-return vehicles that unlock in-space manufacturing, on-orbit warehousing, and 60-minute global delivery through space. Our CarryAll vehicle family returns payloads ranging from 200 kilograms to 10 metric tons, lands within 10 meters of its target, and can then be refurbished and launched again. One vehicle, many missions: responsive logistics and precision delivery for national security; commercial cargo moved with real cadence; R&D payloads flown, tested, and refined across repeatable cycles; and critical aid delivered where roads and runways can't reach. The demand is already here, validated through defense and civil agreements and supported by a growing pipeline of government and commercial customers. We have the customers, the team, and a clear technical path ahead of us. We're building the return lane. Come build it with us The Role Outpost is building vehicles that bring things back from space. Getting mass from orbit to a precise point on the ground is a GNC problem end to end: a deorbit burn that has to hit an entry corridor, a hypersonic entry that has to bleed energy inside structural and thermal limits, and a guided descent that has to land on a target, repeatably, and cheaply enough to do it often. We're hiring a Principal GNC Engineer to own that chain. This is not a role where you hand algorithms over a wall. You'll design the guidance and estimation architecture, write the flight code, put it on hardware, sit through the HIL runs, go out to the drop tests and flight campaigns, and come back with data that changes the design. If you want to see your controller fly within months rather than years, this is that job. Basic Qualifications: Bachelor's degree in a related technical discipline with 5+ years as a GNC or Controls professional or Advanced degree with 3+ years as a GNC or Controls professional Software development experience in C++ and Python. Experience in software tools such as Git, Jira, and CI Pipeline Algorithms on real hardware (e.g. Extended Kalman Filters, LQR) Strong understanding of classical dynamics, modeling and simulation, classical and modern control. Ability to work in a fast paced, autonomously driven atmosphere. Passion for space and the application of advanced estimation and control techniques in this domain Additional Qualifications: Experience with implementing optimal control for burn planning Experience with satellite maneuvering and thruster systems Demonstrated project or professional experience in satellite attitude determination and control Experience in end-to-end development of three axis stabilized spacecraft incorporating momentum, magnetic, and/or propulsive control. Experience with flexible body control, orbital maneuvering, filtering, fault management, software development, and navigation filtering. Responsibilities: Modeling, design, analysis, implementation and test of satellite attitude determination and control (ADCS) algorithms. Hardware performance specification including reaction wheel and torque rod sizing, sensor noise and performance, characteristics, redundancy and fault management. Define and own ADCS requirements definition with electrical and mechanical engineers Implement closed loop pointing, orbit raising, and station keeping algorithms for flight. Analyze platform stability to ensure low jitter of line-of-sight instruments. Develop high fidelity 6 degree of freedom satellite simulations using Python, Matlab or C++. Develop entry guidance, entry corridor and reachability analysis, deorbit burn targeting, aerothermal and load-constrained trajectory shaping. Develop EKF and UKF with GNSS, IMU, air data, radar or laser altimetry, magnetometers, and optical or terrain-relative sensors; sensor error modeling and calibration; GNSS-denied or degraded navigation, including through plasma blackout. Implement control of aerodynamically unstable or marginally stable vehicles, gain scheduling and robust control across wide Mach and dynamic pressure ranges, actuator and effector allocation, autonomous mode sequencing and abort logic. Support flight test campaigns at test sites - test planning, instrumentation requirements, real-time support, and flight data reconstruction. Compensation & Benefits: Salary: Principal: $190,000- $225,00, based on experience Additional Compensation: Annual performance-based bonuses that reward your impact. Shared upside: Meaningful equity in Outpost so you share directly in the value you help create. Comprehensive healthcare: Medical, dental, and vision coverage to keep you and your loved ones covered. We cover the base tier of medical insurance and all premiums of vision and dental. Protection when it matters: Company-provided short- and long-term disability coverage for peace of mind, plus life insurance for even more security. PTO: Recharge on your own terms with paid time off, plus 9 days of paid holidays. Invest in your future: 401(k) with company match to help you build long-term wealth. Fueled for the mission: Daily DoorDash lunch stipend, plus unlimited snacks, coffee, and tea to keep you energized. Mission that matters: Work shoulder-to-shoulder with leaders from aerospace, new space, and deep-tech industries building the future of orbital infrastructure. Pet Friendly Office: Bring your furry friend into the office so that they can be a part of our mission too. Monthly Company Happy Hours and Events: Drinks at the local bar, hibachi nights, mini golfing and more! You must be a U.S. citizen or lawful permanent resident of the U.S., protected individual as defined by 22 C.F.R. 120.15 , or eligible to obtain the required authorizations from the U.S. Department of State
Job Description Job Description Peak Systems is a preferred provider of cutting-edge data center solutions, delivering reliable and scalable infrastructure to support our clients' critical operations. We are seeking skilled Data Center Technicians to join our team and ensure seamless server deployments. As a Data Center Technician , you will be responsible for performing on-site server rack roll-ins, cable management, transceiver installation, and related tasks to obtain optimal data center operations. This role requires a detail-oriented individual with hands-on technical skills and a commitment to safety and efficiency. Location: 2400 Stateline Rd W, Southaven, MS 38671 Pay: $30+/hour (based on experience) Responsibilities: Server Rack Roll-In : Safely transport, install, and secure server racks in designated data center locations, ensuring proper alignment and stability. Cable Management : Organize, route, and label data and power cables to maintain a clean, efficient, and safe environment, adhering to industry standards. Transceiver Installation : Install, test, and troubleshoot optical transceivers to ensure reliable network connectivity. Equipment Setup : Assist in the installation and configuration of servers, networking equipment, and related hardware. Documentation : Maintain accurate records of installations, cabling layouts, labeling, and inventory. Safety Compliance : Adhere to data center safety protocols, including proper handling of equipment and use of personal protective equipment (PPE). Collaboration : Work closely with data center engineers, facilities teams, and vendors to support operational goals. Qualifications: Experience : 2-3+ years of experience in data center operations, IT hardware installation, or a related technical role. Technical Skills : Proficiency in server rack installation, cable management, and transceiver installation techniques. Familiarity with data center infrastructure, including power distribution and cooling systems. Knowledge of networking concepts (e.g., Ethernet, fiber optics, and transceiver compatibility). Physical Requirements : Ability to lift and move heavy equipment (up to 50 lbs) and work in confined spaces. Comfortable standing, bending, and reaching for extended periods. Soft Skills : Strong attention to detail and organizational skills. Excellent problem-solving and communication abilities. Ability to work independently and in a team environment. Certifications (Preferred): CompTIA Server+, Data Center Technician, or equivalent. OSHA 10 or similar safety training. Availability : Willingness to work flexible hours, including nights, weekends, or on-call shifts as needed. Join our team and be a key player in building and maintaining cutting-edge IT infrastructure! Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments. Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments.
09/26/2026
Full time
Job Description Job Description Peak Systems is a preferred provider of cutting-edge data center solutions, delivering reliable and scalable infrastructure to support our clients' critical operations. We are seeking skilled Data Center Technicians to join our team and ensure seamless server deployments. As a Data Center Technician , you will be responsible for performing on-site server rack roll-ins, cable management, transceiver installation, and related tasks to obtain optimal data center operations. This role requires a detail-oriented individual with hands-on technical skills and a commitment to safety and efficiency. Location: 2400 Stateline Rd W, Southaven, MS 38671 Pay: $30+/hour (based on experience) Responsibilities: Server Rack Roll-In : Safely transport, install, and secure server racks in designated data center locations, ensuring proper alignment and stability. Cable Management : Organize, route, and label data and power cables to maintain a clean, efficient, and safe environment, adhering to industry standards. Transceiver Installation : Install, test, and troubleshoot optical transceivers to ensure reliable network connectivity. Equipment Setup : Assist in the installation and configuration of servers, networking equipment, and related hardware. Documentation : Maintain accurate records of installations, cabling layouts, labeling, and inventory. Safety Compliance : Adhere to data center safety protocols, including proper handling of equipment and use of personal protective equipment (PPE). Collaboration : Work closely with data center engineers, facilities teams, and vendors to support operational goals. Qualifications: Experience : 2-3+ years of experience in data center operations, IT hardware installation, or a related technical role. Technical Skills : Proficiency in server rack installation, cable management, and transceiver installation techniques. Familiarity with data center infrastructure, including power distribution and cooling systems. Knowledge of networking concepts (e.g., Ethernet, fiber optics, and transceiver compatibility). Physical Requirements : Ability to lift and move heavy equipment (up to 50 lbs) and work in confined spaces. Comfortable standing, bending, and reaching for extended periods. Soft Skills : Strong attention to detail and organizational skills. Excellent problem-solving and communication abilities. Ability to work independently and in a team environment. Certifications (Preferred): CompTIA Server+, Data Center Technician, or equivalent. OSHA 10 or similar safety training. Availability : Willingness to work flexible hours, including nights, weekends, or on-call shifts as needed. Join our team and be a key player in building and maintaining cutting-edge IT infrastructure! Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments. Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments.
Job Description Job Description At Atom Computing, we build quantum computers using arrays of optically trapped neutral atoms that will empower customers to achieve unprecedented computational breakthroughs. Join a world-class team of scientists, engineers, and business professionals to advance the state-of-the-art in quantum computing. We are looking for Quantum Engineers to work on all aspects of neutral atom quantum computing. As a Quantum Engineer at Atom Computing, you will join a team of talented scientists and engineers who are working to translate fundamental atomic physics to a scalable, fault-tolerant quantum computer. We welcome applicants from a diverse set of backgrounds, but are specifically interested in candidates with experience in the following fields: Trapping and manipulation of cold atoms; Coherent control of quantum systems (for example: neutral atoms, trapped ions, NV- centers, nuclear magnetic resonance, superconducting qubits); Quantum characterization, verification, and validation (QCVV) techniques. Responsibilities Design and construct the scientific hardware and control interfaces (both hardware and software) that are the essential backbone of the quantum computing platform. Generate intellectual property related to the design and operation of neutral-atom-based quantum computers. Distill and communicate findings internally, and as appropriate, in external publications and presentations. Capable of lifting and moving objects that weigh up to 25 pounds. Experience & Education PhD in Physics, Chemistry, Engineering, or a related field. 4+ years work industry experience designing and operating quantum computing hardware, including an explicit technical leadership role. Required Qualifications Extensive knowledge of the state-of-the-art techniques used in atomic physics and quantum computing research Deep understanding of the fundamental interactions between light and matter. Ability to effectively communicate and collaborate with a diverse team of experimental physicists, hardware, and software engineers. Proven track record of successfully leading high impact technical projects Preferred Qualifications Familiarity with Python and Git software version control Atom Computing provides a wide variety of perks and benefits, including fully paid medical, dental, and vision insurance for our employees and their dependents. Additionally, we offer unlimited paid time off, 401K company matching, short- and long-term disability, FSA, dependent care benefits, and life insurance. We also offer drinks, snacks, and catered team lunches in our offices, every day! The salary range for this position is between $200,000 - $230,000, commensurate with experience. In addition to salary, we offer an annual bonus, sign-on bonus and incentive stock options for equity in the company. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
09/26/2026
Full time
Job Description Job Description At Atom Computing, we build quantum computers using arrays of optically trapped neutral atoms that will empower customers to achieve unprecedented computational breakthroughs. Join a world-class team of scientists, engineers, and business professionals to advance the state-of-the-art in quantum computing. We are looking for Quantum Engineers to work on all aspects of neutral atom quantum computing. As a Quantum Engineer at Atom Computing, you will join a team of talented scientists and engineers who are working to translate fundamental atomic physics to a scalable, fault-tolerant quantum computer. We welcome applicants from a diverse set of backgrounds, but are specifically interested in candidates with experience in the following fields: Trapping and manipulation of cold atoms; Coherent control of quantum systems (for example: neutral atoms, trapped ions, NV- centers, nuclear magnetic resonance, superconducting qubits); Quantum characterization, verification, and validation (QCVV) techniques. Responsibilities Design and construct the scientific hardware and control interfaces (both hardware and software) that are the essential backbone of the quantum computing platform. Generate intellectual property related to the design and operation of neutral-atom-based quantum computers. Distill and communicate findings internally, and as appropriate, in external publications and presentations. Capable of lifting and moving objects that weigh up to 25 pounds. Experience & Education PhD in Physics, Chemistry, Engineering, or a related field. 4+ years work industry experience designing and operating quantum computing hardware, including an explicit technical leadership role. Required Qualifications Extensive knowledge of the state-of-the-art techniques used in atomic physics and quantum computing research Deep understanding of the fundamental interactions between light and matter. Ability to effectively communicate and collaborate with a diverse team of experimental physicists, hardware, and software engineers. Proven track record of successfully leading high impact technical projects Preferred Qualifications Familiarity with Python and Git software version control Atom Computing provides a wide variety of perks and benefits, including fully paid medical, dental, and vision insurance for our employees and their dependents. Additionally, we offer unlimited paid time off, 401K company matching, short- and long-term disability, FSA, dependent care benefits, and life insurance. We also offer drinks, snacks, and catered team lunches in our offices, every day! The salary range for this position is between $200,000 - $230,000, commensurate with experience. In addition to salary, we offer an annual bonus, sign-on bonus and incentive stock options for equity in the company. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions PRINCIPAL SPACECRAFT OPERATIONS ENGINEER II- SECRET CLEARANCE Based on site at Rocket Lab's headquarters in Long Beach, CA the PrincipalSpacecraft Operations Engineer is responsible for ensuring the health, safety, and optimal performance of a growing fleet of satellites while meeting mission objectives and SLAs for both commercial and government customers. This includes supporting diverse missions such as LEO constellations, interplanetary exploration, LEO rendezvous, and SDA-related deployments. Your expertise would be critical during commissioning, orbit raising, routine operations, and potentially re-entry phases, ensuring the health and safety of Rocket Lab's expanding fleet. The Spacecraft Operations team works closely with related teams, such as spacecraft design, AIT, flight software, propulsion, GNC, flight dynamics and ground software development to help improve both the ground and satellite-based capabilities over time. The space operations experience at Rocket Lab is unique because you will cover a multitude of roles/positions and responsibilities, with the large majority of the technical products being supplied through the vertical integration/in-house. WHAT YOU'LL GET TO DO: Serve as the program's mission operations technical lead: set the technical direction and strategy for operations, plan and prioritize the work of the mission operations staff, and act as the primary operations point of contact for program-level design decisions and trades Advocate for operability across the program: influence spacecraft and ground architecture upstream so vehicles are designed to be operated safely, efficiently, and autonomously, and push for changes to program design and execution when operational needs demand it Own mission operations requirements and lead requirements validation and verification for spacecraft missions and system-level capability and function Define the automation strategy and lead the development of robust, software-driven methods for mission operations, testing, and data analysis to ensure efficient, repeatable, and reliable spacecraft operation Design, develop, and test flight software sequences and FDIR/telemetry configurations to ensure spacecraft health and fault management through software-driven processes Architect, develop, and test ground software for long-duration operations, including scripting and automation frameworks that make operations robust, hands-off, and scalable across a growing fleet Establish and steward the integration, testing, and maintenance of mission operations tooling and codebases, including CI, version control, and release discipline. Ensure the on-call or shift schedules of operations Author and own interface specifications, CONOPS, contingency procedures, and other operational design documents Lead validation of flight products and procedures against spacecraft simulation tools, including flatsat, HITL, SIL, and digital twins Support AIT teams across multiple spacecraft integrated tests (TVAC, propulsion stack, DITL Provide program and product support to team leads and program managers, and serve as a key technical interface between the NZ and USA engineering teams Represent mission operations in program milestone reviews, design reviews, and readiness gates, and drive continuous improvement through post-mission lessons learned YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPALSPACECRAFT OPERATIONS ENGINEER: Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) 12+ years of direct experience in any of the following: space mission design, satellite subsystems, ground systems, spacecraft command control, or spacecraft operations 5+ years of experience leading teams of engineers through spacecraft missions or related aerospace projects Previous experience in roles such as Mission Lead, Mission Director, Flight Director, or Senior Spacecraft Operations Engineer Previous experience supporting mission operations activities in an on-console or operator-in-the-loop capacity Thorough understanding of key spacecraft subsystems and associated components, including attitude determination and control systems (ADCS), electrical power systems (EPS), space-to-ground communications, command and data handling (C&DH), thermal control systems (TCS), spacecraft propulsion systems, and fault detection, isolation, and recovery (FDIR) Understanding of the space environment, orbital mechanics, and rigid body dynamics 5+ years of direct software development experience (Python/Ruby/C/C++/other high-level languages), covering items such as spacecraft onboard flight scripts, ground scripting and automation, and data manipulation and analysis US citizenship is required due to program requirements Active U.S. Government Secret Security Clearance THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master's or PhD engineering in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) Prior experience in spacecraft operations Prior experience in satellite system design Prior experience in satellite ground systems Exposure to modern development practices - GIT, CI/CD, cloud infrastructure Proficiency with Agile issue-tracking tools, specifically Jira, for mission task management, status tracking, and bug reporting Software-in-the-Loop (SIL) Testing: Exposure to testing frameworks that simulate software behavior in operational environments. Hardware-in-the-Loop (HIL) Testing: Familiarity with testing frameworks that integrate software and hardware systems. Active TS/SCI U.S. Government Security Clearance This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package, giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $223,025-$339,400 USD Base Salary $173,300-$259,850 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: . click apply for full job details
09/26/2026
Full time
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions PRINCIPAL SPACECRAFT OPERATIONS ENGINEER II- SECRET CLEARANCE Based on site at Rocket Lab's headquarters in Long Beach, CA the PrincipalSpacecraft Operations Engineer is responsible for ensuring the health, safety, and optimal performance of a growing fleet of satellites while meeting mission objectives and SLAs for both commercial and government customers. This includes supporting diverse missions such as LEO constellations, interplanetary exploration, LEO rendezvous, and SDA-related deployments. Your expertise would be critical during commissioning, orbit raising, routine operations, and potentially re-entry phases, ensuring the health and safety of Rocket Lab's expanding fleet. The Spacecraft Operations team works closely with related teams, such as spacecraft design, AIT, flight software, propulsion, GNC, flight dynamics and ground software development to help improve both the ground and satellite-based capabilities over time. The space operations experience at Rocket Lab is unique because you will cover a multitude of roles/positions and responsibilities, with the large majority of the technical products being supplied through the vertical integration/in-house. WHAT YOU'LL GET TO DO: Serve as the program's mission operations technical lead: set the technical direction and strategy for operations, plan and prioritize the work of the mission operations staff, and act as the primary operations point of contact for program-level design decisions and trades Advocate for operability across the program: influence spacecraft and ground architecture upstream so vehicles are designed to be operated safely, efficiently, and autonomously, and push for changes to program design and execution when operational needs demand it Own mission operations requirements and lead requirements validation and verification for spacecraft missions and system-level capability and function Define the automation strategy and lead the development of robust, software-driven methods for mission operations, testing, and data analysis to ensure efficient, repeatable, and reliable spacecraft operation Design, develop, and test flight software sequences and FDIR/telemetry configurations to ensure spacecraft health and fault management through software-driven processes Architect, develop, and test ground software for long-duration operations, including scripting and automation frameworks that make operations robust, hands-off, and scalable across a growing fleet Establish and steward the integration, testing, and maintenance of mission operations tooling and codebases, including CI, version control, and release discipline. Ensure the on-call or shift schedules of operations Author and own interface specifications, CONOPS, contingency procedures, and other operational design documents Lead validation of flight products and procedures against spacecraft simulation tools, including flatsat, HITL, SIL, and digital twins Support AIT teams across multiple spacecraft integrated tests (TVAC, propulsion stack, DITL Provide program and product support to team leads and program managers, and serve as a key technical interface between the NZ and USA engineering teams Represent mission operations in program milestone reviews, design reviews, and readiness gates, and drive continuous improvement through post-mission lessons learned YOU'LL BRING THESE QUALIFICATIONS AS A PRINCIPALSPACECRAFT OPERATIONS ENGINEER: Bachelor's degree in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) 12+ years of direct experience in any of the following: space mission design, satellite subsystems, ground systems, spacecraft command control, or spacecraft operations 5+ years of experience leading teams of engineers through spacecraft missions or related aerospace projects Previous experience in roles such as Mission Lead, Mission Director, Flight Director, or Senior Spacecraft Operations Engineer Previous experience supporting mission operations activities in an on-console or operator-in-the-loop capacity Thorough understanding of key spacecraft subsystems and associated components, including attitude determination and control systems (ADCS), electrical power systems (EPS), space-to-ground communications, command and data handling (C&DH), thermal control systems (TCS), spacecraft propulsion systems, and fault detection, isolation, and recovery (FDIR) Understanding of the space environment, orbital mechanics, and rigid body dynamics 5+ years of direct software development experience (Python/Ruby/C/C++/other high-level languages), covering items such as spacecraft onboard flight scripts, ground scripting and automation, and data manipulation and analysis US citizenship is required due to program requirements Active U.S. Government Secret Security Clearance THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master's or PhD engineering in engineering (software, computer, electrical, aerospace, mechanical, or other technical engineering discipline) Prior experience in spacecraft operations Prior experience in satellite system design Prior experience in satellite ground systems Exposure to modern development practices - GIT, CI/CD, cloud infrastructure Proficiency with Agile issue-tracking tools, specifically Jira, for mission task management, status tracking, and bug reporting Software-in-the-Loop (SIL) Testing: Exposure to testing frameworks that simulate software behavior in operational environments. Hardware-in-the-Loop (HIL) Testing: Familiarity with testing frameworks that integrate software and hardware systems. Active TS/SCI U.S. Government Security Clearance This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package, giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $223,025-$339,400 USD Base Salary $173,300-$259,850 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: . click apply for full job details
Job Description Job Description Who We Are: Aurelius Systems is a VC backed defense tech startup building autonomous, edge deployed directed energy systems for counter-UAS. We build laser weapons to shoot down drones. We're a small team of 10 engineers, former US military operators, and subject matter experts scaling America's directed energy dominance. The first cost effective, reliable and robust laser weapon system. Our namesake isn't an accident. Marcus Aurelius wrote about doing the work in front of you, every day, without excuses. Henry Ford didn't wait for permission to reinvent manufacturing. That's how we operate - small team, unreasonable output, no hiding behind the unachievable. In addition to our San Francisco lab, we opened our Detroit manufacturing hub and field test weekly on our own 400-acre private range. The Role and Your Impact: We need a Principal Hardware Engineer to bring senior technical judgment across Archimedes hardware. You are a highly experienced builder who has seen systems go the full way. From a working prototype to hardware that ships and survives in the field. You've done it more than once. You know where systems break, where teams get stuck, and how to keep both moving. This is a technical leadership seat, not a people management seat. Your role is to raise the level of the hardware org through experience, architectural judgment, and hands-on execution. You lead by example, you unblock hard problems, and you set the technical bar for how hardware gets designed and shipped at Aurelius. You'll partner with the founders and the Director of Engineering on architecture and roadmap. You'll work directly alongside mechanical, electrical, power, embedded, and optics engineers on the hardest problems the team is facing. What You'll Own: Architectural direction across the hardware stack from mechanical, electrical, power, to embedded integration Technical decisions on the hardest problems, from concept through production readiness Pattern recognition and technical review like surfacing risk early, and catching what junior engineers miss Handson execution when the problem needs your specific experience to solve fast Design and manufacturing trades across cost, mass, reliability, schedule, and field performance Cross-team judgment when hardware, controls, optics, and software collide Setting the technical bar for design reviews, documentation quality, and release standards Mentorship by example. Engineers should learn from watching you work, not from being managed by you What We're Looking For: 10+ years designing and shipping complex hardware systems Track record taking systems the full development cycle from prototype through manufacturing and deployment Senior IC or technical leadership background at hardware companies that actually shipped Deep technical judgment across at least two of: mechanical, electrical, power electronics, embedded systems Pattern recognition from having built real systems before, especially systems that had to survive real-world conditions Comfort operating as the technical anchor on a small team, not the manager of a large one Nice to Haves: Directed energy, laser, or high-power systems experience Defense or aerospace program experience with MIL-STD or equivalent qualification Founder or founding engineer background at a hardware company Manufacturing depth as-in you've stood up production lines or worked closely with the manufacturers who do Active security clearance or ability to obtain one How You Operate: Extreme bias for action. You'd rather build a prototype tomorrow than model it for a month You characterize your own systems before the field does Comfortable with ambiguity and fast iteration in a startup environment You debug from first principles, not intuition alone Clear communicator across mechanical, electrical, optical, and software teams Self directed. You identify what needs to happen next and do it without being told Why Join Aurelius Systems: Build more in 1 month than most engineers build in 1 year. We field test weekly. Your work goes downrange, not into a filing cabinet. Career velocity is real. At 10 engineers, there are no layers between you and impact. Work on a problem that actually matters. Small cheap drones are changing warfare. Our laser systems are the asymmetric answer - infinite magazine, near zero cost per shot, scalable to every base, border, facility, and truck. Join the densest defense startup ecosystem in the country. California is where the next generation of defense companies are being built. How We Work: Core hours are Monday through Friday, 9 to 6. When we're sprinting toward a demo or field test, the team ramps up - nights, weekends, whatever it takes to ship. When the sprint lands, we ramp down. We don't manufacture intensity for show. Benefits: Competitive salary and equity United Health Care medical, dental, and vision coverage Flexible 18 days PTO plus 5 sick days Travel to field test events and range days Covered daily lunches and office snacks and drinks E-bike and scooter stipend up to $500 Direct access to leadership and real ownership over your work Export Control Notice: This role requires access to export-controlled information or items that require U.S. Person status. As defined by U.S. law, individuals who are any one of the following are considered to be a U.S. Person: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Compensation Range: $255K - $305K
09/26/2026
Full time
Job Description Job Description Who We Are: Aurelius Systems is a VC backed defense tech startup building autonomous, edge deployed directed energy systems for counter-UAS. We build laser weapons to shoot down drones. We're a small team of 10 engineers, former US military operators, and subject matter experts scaling America's directed energy dominance. The first cost effective, reliable and robust laser weapon system. Our namesake isn't an accident. Marcus Aurelius wrote about doing the work in front of you, every day, without excuses. Henry Ford didn't wait for permission to reinvent manufacturing. That's how we operate - small team, unreasonable output, no hiding behind the unachievable. In addition to our San Francisco lab, we opened our Detroit manufacturing hub and field test weekly on our own 400-acre private range. The Role and Your Impact: We need a Principal Hardware Engineer to bring senior technical judgment across Archimedes hardware. You are a highly experienced builder who has seen systems go the full way. From a working prototype to hardware that ships and survives in the field. You've done it more than once. You know where systems break, where teams get stuck, and how to keep both moving. This is a technical leadership seat, not a people management seat. Your role is to raise the level of the hardware org through experience, architectural judgment, and hands-on execution. You lead by example, you unblock hard problems, and you set the technical bar for how hardware gets designed and shipped at Aurelius. You'll partner with the founders and the Director of Engineering on architecture and roadmap. You'll work directly alongside mechanical, electrical, power, embedded, and optics engineers on the hardest problems the team is facing. What You'll Own: Architectural direction across the hardware stack from mechanical, electrical, power, to embedded integration Technical decisions on the hardest problems, from concept through production readiness Pattern recognition and technical review like surfacing risk early, and catching what junior engineers miss Handson execution when the problem needs your specific experience to solve fast Design and manufacturing trades across cost, mass, reliability, schedule, and field performance Cross-team judgment when hardware, controls, optics, and software collide Setting the technical bar for design reviews, documentation quality, and release standards Mentorship by example. Engineers should learn from watching you work, not from being managed by you What We're Looking For: 10+ years designing and shipping complex hardware systems Track record taking systems the full development cycle from prototype through manufacturing and deployment Senior IC or technical leadership background at hardware companies that actually shipped Deep technical judgment across at least two of: mechanical, electrical, power electronics, embedded systems Pattern recognition from having built real systems before, especially systems that had to survive real-world conditions Comfort operating as the technical anchor on a small team, not the manager of a large one Nice to Haves: Directed energy, laser, or high-power systems experience Defense or aerospace program experience with MIL-STD or equivalent qualification Founder or founding engineer background at a hardware company Manufacturing depth as-in you've stood up production lines or worked closely with the manufacturers who do Active security clearance or ability to obtain one How You Operate: Extreme bias for action. You'd rather build a prototype tomorrow than model it for a month You characterize your own systems before the field does Comfortable with ambiguity and fast iteration in a startup environment You debug from first principles, not intuition alone Clear communicator across mechanical, electrical, optical, and software teams Self directed. You identify what needs to happen next and do it without being told Why Join Aurelius Systems: Build more in 1 month than most engineers build in 1 year. We field test weekly. Your work goes downrange, not into a filing cabinet. Career velocity is real. At 10 engineers, there are no layers between you and impact. Work on a problem that actually matters. Small cheap drones are changing warfare. Our laser systems are the asymmetric answer - infinite magazine, near zero cost per shot, scalable to every base, border, facility, and truck. Join the densest defense startup ecosystem in the country. California is where the next generation of defense companies are being built. How We Work: Core hours are Monday through Friday, 9 to 6. When we're sprinting toward a demo or field test, the team ramps up - nights, weekends, whatever it takes to ship. When the sprint lands, we ramp down. We don't manufacture intensity for show. Benefits: Competitive salary and equity United Health Care medical, dental, and vision coverage Flexible 18 days PTO plus 5 sick days Travel to field test events and range days Covered daily lunches and office snacks and drinks E-bike and scooter stipend up to $500 Direct access to leadership and real ownership over your work Export Control Notice: This role requires access to export-controlled information or items that require U.S. Person status. As defined by U.S. law, individuals who are any one of the following are considered to be a U.S. Person: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Compensation Range: $255K - $305K
Job Description Job Description HRL Laboratories, an IBM company, pioneers the next frontiers of physical and information science. Delivering transformative technologies in automotive, aerospace and defense, HRL advances the critical missions of its customers to help them remove limitations and create competitive advantage. HRL then transitions the work back to customers - ready for real-world application. For more than 70 years, HRL's rich portfolio of scientific discoveries and engineering innovations continues to build on each other - often in unexpected, profound and far-reaching ways. As a private company owned by IBM, HRL prioritizes purpose over profit, significantly advancing the state of the art. HRL Laboratories advances critical structural and functional materials and semiconductor devices that enable precision navigation, quantum technologies and extreme-environment performance. With expertise from design through deployment, we deliver scalable, high-performance solutions that transform our customers' missions. Our work leverages digital manufacturing and scalable microfabrication techniques to meet tomorrow's toughest challenges. Position Summary: • Design, build, test, and analyze optical, optoelectronic, and photonic experiments for quantum communications systems and platforms • Collaborate with multidisciplinary R&D teams to advance quantum communications technologies Key Responsibilities: • Perform critical engineering and R&D under the supervision of staff scientists for next generation quantum photonic/electronic devices and deployable optical payloads • Design, model, setup, and test of free-space and/fiber optic experiments and design and fabrication of state-of-the-art semiconductor devices • Improve processes, perform measurements, collect, summarize, and analyze data, present and discuss data with other scientists • Work with mechanical and electrical teams to troubleshoot complex systems Required Qualifications: • Bachelor's or master's in physics, Electrical Engineering, Optical Engineering, or related discipline • Some prior experience working with any of microfabrication, free-space/fiber optics, electronics, computer-controlled experiments obtain through coursework, independent study, or other internships • Strong desire to learn and be trained in scientific laboratory techniques and experimental procedures • Must be able to work well in a dynamic team environment and possess excellent communication skills • Working knowledge of free space optics, fiber optics, mechanical CAD software, and rf-test equipment (spectrum analyzers, power meters, oscilloscopes) Physical Requirements: • Must be able to work safely in an optical testing laboratory • Excellent verbal and written communication skills and organization skills are required • Must be proficient in use of computers, engineering workstations, and complex electronic equipment Special Requirements: • US Citizenship with the ability to obtain and maintain a US Government security clearance Compensation and Benefits: Pay Range : $81,800- 98,900 Our salary ranges are determined by role, level, and location (California). The range displayed on each job posting reflects the target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range during the hiring process. Benefits: HRL offers a generous and very competitive total compensation and benefits package. Our Regular/Full Time benefits include medical, dental, vision, life insurance, 401K match, gym facilities, PTO, Sick time, upward mobility, and an exciting and challenging work environment. For more information about our company benefit offerings please visit: Non-Discrimination and Equal Employment Opportunities (U.S.) Don't meet every single requirement? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At HRL, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants u007C U.S. Equal Employment Opportunity Commission For our privacy policy please visit: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
09/26/2026
Full time
Job Description Job Description HRL Laboratories, an IBM company, pioneers the next frontiers of physical and information science. Delivering transformative technologies in automotive, aerospace and defense, HRL advances the critical missions of its customers to help them remove limitations and create competitive advantage. HRL then transitions the work back to customers - ready for real-world application. For more than 70 years, HRL's rich portfolio of scientific discoveries and engineering innovations continues to build on each other - often in unexpected, profound and far-reaching ways. As a private company owned by IBM, HRL prioritizes purpose over profit, significantly advancing the state of the art. HRL Laboratories advances critical structural and functional materials and semiconductor devices that enable precision navigation, quantum technologies and extreme-environment performance. With expertise from design through deployment, we deliver scalable, high-performance solutions that transform our customers' missions. Our work leverages digital manufacturing and scalable microfabrication techniques to meet tomorrow's toughest challenges. Position Summary: • Design, build, test, and analyze optical, optoelectronic, and photonic experiments for quantum communications systems and platforms • Collaborate with multidisciplinary R&D teams to advance quantum communications technologies Key Responsibilities: • Perform critical engineering and R&D under the supervision of staff scientists for next generation quantum photonic/electronic devices and deployable optical payloads • Design, model, setup, and test of free-space and/fiber optic experiments and design and fabrication of state-of-the-art semiconductor devices • Improve processes, perform measurements, collect, summarize, and analyze data, present and discuss data with other scientists • Work with mechanical and electrical teams to troubleshoot complex systems Required Qualifications: • Bachelor's or master's in physics, Electrical Engineering, Optical Engineering, or related discipline • Some prior experience working with any of microfabrication, free-space/fiber optics, electronics, computer-controlled experiments obtain through coursework, independent study, or other internships • Strong desire to learn and be trained in scientific laboratory techniques and experimental procedures • Must be able to work well in a dynamic team environment and possess excellent communication skills • Working knowledge of free space optics, fiber optics, mechanical CAD software, and rf-test equipment (spectrum analyzers, power meters, oscilloscopes) Physical Requirements: • Must be able to work safely in an optical testing laboratory • Excellent verbal and written communication skills and organization skills are required • Must be proficient in use of computers, engineering workstations, and complex electronic equipment Special Requirements: • US Citizenship with the ability to obtain and maintain a US Government security clearance Compensation and Benefits: Pay Range : $81,800- 98,900 Our salary ranges are determined by role, level, and location (California). The range displayed on each job posting reflects the target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range during the hiring process. Benefits: HRL offers a generous and very competitive total compensation and benefits package. Our Regular/Full Time benefits include medical, dental, vision, life insurance, 401K match, gym facilities, PTO, Sick time, upward mobility, and an exciting and challenging work environment. For more information about our company benefit offerings please visit: Non-Discrimination and Equal Employment Opportunities (U.S.) Don't meet every single requirement? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At HRL, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants u007C U.S. Equal Employment Opportunity Commission For our privacy policy please visit: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions. PRINCIPAL SPACECRAFT GUIDANCE NAVIGATION AND CONTROL (GNC) ENGINEER - SECRET CLEARANCE Based out of Rocket Lab's global headquarters in Long Beach, CA, the Principal Spacecraft GNC Engineer - Secret Clearance is responsible for leading GNC and ADCS development for Rocket Lab's growing fleet of diverse spacecraft. You will demonstrate a firm grasp of spacecraft GNC concepts and applications. You will work with all facets of the engineering life cycle: spacecraft concept and algorithm development, flight software implementation, subsystem requirements development, detailed GNC design, subsystem integration & test (I&T), and vehicle I&T. You will be responsible for planning and maintaining the development schedule to support the Space Systems Software organization in executing leading edge programs and products. You will work closely with related teams, including Systems, Avionics, Flight Software, Mission Operations, and Ground Software. You will also directly interact with customers to ensure mission success. WHAT YOU'LL GET TO DO: Mentor a team responsible for GNC design, modeling, and analysis for a wide variety of spacecraft and space missions to include LEO, MEO, GEO, Lunar, Interplanetary, Reentry, and RPOD Design of flight software, algorithms, and simulation product Development of spacecraft autonomy tools for constellation management GNC component selection and GNC subsystem design Test process development and execution Define fault detection and response Hardware-in-the-loop and Monte Carlo simulation Integration of flight and simulation software with modern analysis, test, and operations tools Support internal and external design reviews Work with department leads and program managers to plan and maintain team schedule and milestones and report technical status Coordinate with teams in Denver, Colorado and New Zealand YOU'LL BRING THESE QUALIFICATIONS AS PRINCIPAL SPACECRAFT GNC ENGINEER : B.S and 12+ years of industry experience in GNC/ADCS Active Secret clearance, with ability to obtain TS/SCI Prior experience directly interfacing with aerospace customers in the commercial or government sectors U.S citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: MS or PhD 2+ years of RPOD design and operations experience Active TS/SCI clearance Experience in Jira planning and workflow Prior experiencing mentoring a team of younger engineers Hands-on experience with IMU, reaction wheels, star trackers, gyroscopes, and other GNC hardware Experience developing blended attitude solutions from a variety of sensor data Demonstrated experience developing, implementing, and verifying flight software Demonstrated experience with spacecraft on-orbit operations and anomaly resolution Prior experience leading a team across a project lifecycle (not necessarily a spacecraft, not necessarily a whole GNC system) Prior experience working multiple projects simultaneously and determining priorities for a team Experience with GNC-related Business Development or conceptual design work This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package , giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $247,000-$376,000 USD Base Salary $195,000-$295,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.
09/26/2026
Full time
Job Description Job Description ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets - we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space - our world class Space Systems team is empowering some of the boldest and most ambitious space missions. PRINCIPAL SPACECRAFT GUIDANCE NAVIGATION AND CONTROL (GNC) ENGINEER - SECRET CLEARANCE Based out of Rocket Lab's global headquarters in Long Beach, CA, the Principal Spacecraft GNC Engineer - Secret Clearance is responsible for leading GNC and ADCS development for Rocket Lab's growing fleet of diverse spacecraft. You will demonstrate a firm grasp of spacecraft GNC concepts and applications. You will work with all facets of the engineering life cycle: spacecraft concept and algorithm development, flight software implementation, subsystem requirements development, detailed GNC design, subsystem integration & test (I&T), and vehicle I&T. You will be responsible for planning and maintaining the development schedule to support the Space Systems Software organization in executing leading edge programs and products. You will work closely with related teams, including Systems, Avionics, Flight Software, Mission Operations, and Ground Software. You will also directly interact with customers to ensure mission success. WHAT YOU'LL GET TO DO: Mentor a team responsible for GNC design, modeling, and analysis for a wide variety of spacecraft and space missions to include LEO, MEO, GEO, Lunar, Interplanetary, Reentry, and RPOD Design of flight software, algorithms, and simulation product Development of spacecraft autonomy tools for constellation management GNC component selection and GNC subsystem design Test process development and execution Define fault detection and response Hardware-in-the-loop and Monte Carlo simulation Integration of flight and simulation software with modern analysis, test, and operations tools Support internal and external design reviews Work with department leads and program managers to plan and maintain team schedule and milestones and report technical status Coordinate with teams in Denver, Colorado and New Zealand YOU'LL BRING THESE QUALIFICATIONS AS PRINCIPAL SPACECRAFT GNC ENGINEER : B.S and 12+ years of industry experience in GNC/ADCS Active Secret clearance, with ability to obtain TS/SCI Prior experience directly interfacing with aerospace customers in the commercial or government sectors U.S citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: MS or PhD 2+ years of RPOD design and operations experience Active TS/SCI clearance Experience in Jira planning and workflow Prior experiencing mentoring a team of younger engineers Hands-on experience with IMU, reaction wheels, star trackers, gyroscopes, and other GNC hardware Experience developing blended attitude solutions from a variety of sensor data Demonstrated experience developing, implementing, and verifying flight software Demonstrated experience with spacecraft on-orbit operations and anomaly resolution Prior experience leading a team across a project lifecycle (not necessarily a spacecraft, not necessarily a whole GNC system) Prior experience working multiple projects simultaneously and determining priorities for a team Experience with GNC-related Business Development or conceptual design work This position may require prolonged periods of sitting, standing, walking, computer work, and occasional exposure to moderate levels of noise, dust, and fumes in production areas. Anticipated annual equity grant value is designed around function, level, experience, and other factors; realized value depends on vesting and stock-price performance. Join one of the world's fastest-growing space companies and own a piece of it. In addition to competitive base pay, you'll receive company stock as part of your total compensation package , giving you a direct stake in our success. As we expand to new launch sites, groundbreaking missions, and global markets, your ownership has the opportunity to grow alongside the company. Our comprehensive benefits package includes our industry-leading Employee Stock Purchase Program (with a 15% discount on company stock), top-tier medical plans (HMO, PPO, and a zero cost HDHP option with a significant HSA company contribution), dental and vision coverage, paid vacation and sick time, 11 paid holidays, flexible spending and dependent care accounts, paid parental leave, disability and life insurance, and a 401(k) retirement plan with company match. Additional perks include subsidized EV charging, onsite fitness centers (where available), discounted gym memberships, complimentary snacks and beverages, 50% employee discount on our popular merch store, and a variety of other employee discounts. Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total Compensation (base and equity) $247,000-$376,000 USD Base Salary $195,000-$295,000 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work, and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons, background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union, or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.
Job description: We are looking for an experienced Firmware Engineer to contribute to the development of products on our Research and Development Division in Herndon VA. As part of our R&D division, you would join our firmware team to develop, integrate, and test our firmware products in our spaced-based, electro-optical systems. Essential Job Duties Lead and contribute to firmware architecture and implementation for space-based electro-optical payloads and laser systems Perform end-to-end firmware development lifecycle: from requirements analysis through design, coding, simulation, verification, and validation Collaborate closely with hardware, systems, software, and optical engineers in cross-functional teams to define interfaces, resolve design issues, and ensure seamless system integration Participate in task-based iterative development cycles, incorporating rapid feedback, frequent integration points, and incremental testing to meet mission reliability goals Conduct lab-based debugging, hardware-in-the-loop testing, and system-level validation using diagnostic tools and protocols Support peer code reviews, knowledge sharing, and continuous improvement of development processes and best practices Apply high-reliability and space-grade techniques (e.g., fault tolerance, radiation mitigation) in a collaborative, team-oriented environment Contribute to documentation, design reviews, and risk identification throughout the product lifecycle Job Requirements Experience and Expertise Required 7+ years relevant experience BS/MS in EE or equivalent Expertise with firmware engineering, VHDL (RTL), System Verilog (Testing) Expertise with Digital Signal Processing, precision timing, optical comms (modems), LIDAR Experience with Xilinx, Microchip, and Lattice FPGAs and their associated development tools Experience developing test benches and running simulations to exercise the design and to verify compliance Experience interfacing and working with hardware designers during development, integration, and test phases Experience using schematics and block diagrams as inputs for firmware design Experience in high-speed serial links: GTY/GTM, JESD204B/C, Ethernet, SpaceWire Experience in standard peripheral interfaces: SPI, I2C, UART, LVDS, etc. Experience in memory interfaces: DDR3/4, QDR, FRAM, etc. Experience with GitHub, CI/CD for FPGA flows, code reviews, automated linting, synthesis, regression testing, timing closure, bitstream generation, release tagging Bonus Areas Experience in Python for build/testing automation and data analysis Experience with Linux, scripting, Docker containers, and automation Experience developing Hi-Rel/Space programs and TMR coding Experience developing code (C, C++) for microcontrollers Experience with VS Code We are a leading developer of laser and electro-optic systems for the aerospace community, with key contributions to lasers for atmospheric sensing, laser communications, and lidar sensors for NASA, DoD, and commercial customers. Qualifications: Job Requirements Experience and Expertise Required 7+ years relevant experience BS/MS in EE or equivalent Expertise with firmware engineering, VHDL (RTL), System Verilog (Testing) Expertise with Digital Signal Processing, precision timing, optical comms (modems), LIDAR Experience with Xilinx, Microchip, and Lattice FPGAs and their associated development tools Experience developing test benches and running simulations to exercise the design and to verify compliance Experience interfacing and working with hardware designers during development, integration, and test phases Experience using schematics and block diagrams as inputs for firmware design Experience in high-speed serial links: GTY/GTM, JESD204B/C, Ethernet, SpaceWire Experience in standard peripheral interfaces: SPI, I2C, UART, LVDS, etc. Experience in memory interfaces: DDR3/4, QDR, FRAM, etc. Experience with GitHub, CI/CD for FPGA flows, code reviews, automated linting, synthesis, regression testing, timing closure, bitstream generation, release tagging Bonus Areas Experience in Python for build/testing automation and data analysis Experience with Linux, scripting, Docker containers, and automation Experience developing Hi-Rel/Space programs and TMR coding Experience developing code (C, C++) for microcontrollers Experience with VS Code We are a leading developer of laser and electro-optic systems for the aerospace community, with key contributions to lasers for atmospheric sensing, laser communications, and lidar sensors for NASA, DoD, and commercial customers. Why is This a Great Opportunity: We are looking for an experienced Firmware Engineer to contribute to the development of products on our Research and Development Division in Herndon VA. As part of our R&D division, you would join our firmware team to develop, integrate, and test our firmware products in our spaced-based, electro-optical systems. Salary Type : Annual Salary Salary Min : $ 140000 Salary Max : $ 210000 Currency Type : USD
09/26/2026
Full time
Job description: We are looking for an experienced Firmware Engineer to contribute to the development of products on our Research and Development Division in Herndon VA. As part of our R&D division, you would join our firmware team to develop, integrate, and test our firmware products in our spaced-based, electro-optical systems. Essential Job Duties Lead and contribute to firmware architecture and implementation for space-based electro-optical payloads and laser systems Perform end-to-end firmware development lifecycle: from requirements analysis through design, coding, simulation, verification, and validation Collaborate closely with hardware, systems, software, and optical engineers in cross-functional teams to define interfaces, resolve design issues, and ensure seamless system integration Participate in task-based iterative development cycles, incorporating rapid feedback, frequent integration points, and incremental testing to meet mission reliability goals Conduct lab-based debugging, hardware-in-the-loop testing, and system-level validation using diagnostic tools and protocols Support peer code reviews, knowledge sharing, and continuous improvement of development processes and best practices Apply high-reliability and space-grade techniques (e.g., fault tolerance, radiation mitigation) in a collaborative, team-oriented environment Contribute to documentation, design reviews, and risk identification throughout the product lifecycle Job Requirements Experience and Expertise Required 7+ years relevant experience BS/MS in EE or equivalent Expertise with firmware engineering, VHDL (RTL), System Verilog (Testing) Expertise with Digital Signal Processing, precision timing, optical comms (modems), LIDAR Experience with Xilinx, Microchip, and Lattice FPGAs and their associated development tools Experience developing test benches and running simulations to exercise the design and to verify compliance Experience interfacing and working with hardware designers during development, integration, and test phases Experience using schematics and block diagrams as inputs for firmware design Experience in high-speed serial links: GTY/GTM, JESD204B/C, Ethernet, SpaceWire Experience in standard peripheral interfaces: SPI, I2C, UART, LVDS, etc. Experience in memory interfaces: DDR3/4, QDR, FRAM, etc. Experience with GitHub, CI/CD for FPGA flows, code reviews, automated linting, synthesis, regression testing, timing closure, bitstream generation, release tagging Bonus Areas Experience in Python for build/testing automation and data analysis Experience with Linux, scripting, Docker containers, and automation Experience developing Hi-Rel/Space programs and TMR coding Experience developing code (C, C++) for microcontrollers Experience with VS Code We are a leading developer of laser and electro-optic systems for the aerospace community, with key contributions to lasers for atmospheric sensing, laser communications, and lidar sensors for NASA, DoD, and commercial customers. Qualifications: Job Requirements Experience and Expertise Required 7+ years relevant experience BS/MS in EE or equivalent Expertise with firmware engineering, VHDL (RTL), System Verilog (Testing) Expertise with Digital Signal Processing, precision timing, optical comms (modems), LIDAR Experience with Xilinx, Microchip, and Lattice FPGAs and their associated development tools Experience developing test benches and running simulations to exercise the design and to verify compliance Experience interfacing and working with hardware designers during development, integration, and test phases Experience using schematics and block diagrams as inputs for firmware design Experience in high-speed serial links: GTY/GTM, JESD204B/C, Ethernet, SpaceWire Experience in standard peripheral interfaces: SPI, I2C, UART, LVDS, etc. Experience in memory interfaces: DDR3/4, QDR, FRAM, etc. Experience with GitHub, CI/CD for FPGA flows, code reviews, automated linting, synthesis, regression testing, timing closure, bitstream generation, release tagging Bonus Areas Experience in Python for build/testing automation and data analysis Experience with Linux, scripting, Docker containers, and automation Experience developing Hi-Rel/Space programs and TMR coding Experience developing code (C, C++) for microcontrollers Experience with VS Code We are a leading developer of laser and electro-optic systems for the aerospace community, with key contributions to lasers for atmospheric sensing, laser communications, and lidar sensors for NASA, DoD, and commercial customers. Why is This a Great Opportunity: We are looking for an experienced Firmware Engineer to contribute to the development of products on our Research and Development Division in Herndon VA. As part of our R&D division, you would join our firmware team to develop, integrate, and test our firmware products in our spaced-based, electro-optical systems. Salary Type : Annual Salary Salary Min : $ 140000 Salary Max : $ 210000 Currency Type : USD
About Urban Sky Urban Sky is a venture-backed aerospace startup on a mission to pioneer humanity's routine, easy access to the stratosphere and the value locked within it. We design, build, operate, and sell stratospheric balloon systems. The data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of War (DoW), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and Texas and are seeking self-starting, open-minded, and hard-working team members. Position Overview / Onsite / Full-time / Salaried Urban Sky is seeking a Senior Embedded Imaging Software Engineer to own the firmware, imaging pipeline, and data-movement stack behind our electro-optical (EO) and infrared (IR) payloads - from the sensor at the focal plane to the command-and-control link on the ground. You'll write the firmware that drives our cameras and edge compute, own the CUDA image processing pipeline that turns raw pixels into clean, calibrated, geo-tagged imagery, and architect the high-rate data paths and C2 infrastructure that connect the payload to the customer. Your goal: deliver clean, honest imagery. Much of this work proves out in the field - at events, exercises, and customer engagements. Key Responsibilities: Own embedded firmware for our EO and IR payloads: sensor bring-up, driver development, and edge compute on NVIDIA Jetson platforms Integrate cameras and sensors over PCIe, MIPI/CSI, and USB, and develop board-support packages for custom carrier boards, system-on-modules, and companion microcontrollers Own the L0 image processing pipeline running in CUDA at the edge: debayering, white balance, gamma, and camera/lens correction - applied to raw frames before any codec Own IR-specific processing: non-uniformity correction (NUC), bad-pixel replacement, and radiometric calibration Develop multi-frame super-resolution and related computational imaging capabilities Implement imagery metadata (KLV/MISB) so every frame carries accurate pointing, position, and time Architect high-throughput data paths across the vehicle - PCIe as a first-class specialty - and the routing infrastructure that carries imagery, telemetry, and C2 across satellite, tactical-radio, and IP links Optimize for latency, throughput, and determinism, and balance pipeline compute against onboard ML workloads sharing the same CUDA resources Integrate payload firmware with the gimbal and motion-control stack, consuming pointing and autonomy commands from the broader payload software architecture Develop and maintain optical calibrations for our EO/IR payloads - lens distortion modeling, vignetting/flat-field correction, and MTF/sharpness characterization - so imagery quality is measured and repeatable across cameras and flights Implement motion and temporal compensation (frame-to-frame registration, stabilization, and temporal filtering) to maximize effective image quality from a moving platform Qualifications: Experience building end-to-end camera/imaging systems, from sensor to downstream consumer Working experience with image processing pipelines (debayering, calibration, correction) and CUDA or GPU-accelerated processing Experience with optical calibration and characterization - distortion modeling, vignetting correction, MTF/sharpness measurement - and building the correction steps that apply them in a processing pipeline Familiarity with motion/temporal compensation techniques (registration, stabilization, temporal filtering) for imaging from moving platforms 5+ years developing embedded firmware in C/C++ for embedded Linux and/or bare-metal/RTOS systems Hands-on experience shipping on NVIDIA Jetson or comparable embedded Linux/SoC platforms Deep experience moving high-rate data over PCIe (driver, DMA, endpoint/root-complex level) Solid grounding in networking, data routing, and command-and-control infrastructure Strong hardware debugging skills and comfort working from schematics Nice-to-Haves / Preferred Skills: IR/thermal imaging experience, including NUC and radiometric calibration GStreamer, V4L2, or other imaging/video pipeline frameworks Computational imaging techniques (super-resolution, stacking, HDR) Defense imagery and metadata standards (MISB/KLV, STANAG); defense or mission-critical development experience FPGA workflows or high-speed serial interfaces (SerDes, Aurora, MIPI) Experience with optics and optical hardware Experience with multi-sensor and multispectral fusion - co-registering and combining imagery across sensors and bands into fused data products, in partnership with downstream data teams Requirements: Must be US Citizen or Permanent Resident Must be able to obtain and maintain a US security clearance (an active clearance is a plus) Must be located near Denver, CO or willing to relocate; role is on-site at our Denver headquarters (4800 Race St) Travel expected to support field events, exercises, and customer engagements Benefits: Stock Options Medical, Vision and Dental Flexible PTO Cell Phone Bill Stipend Urban Sky is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. The pay range for this role is: 140,000 - 180,000 USD per year(Denver CO HQ) PI5810b4bf9b36-6921
09/26/2026
Full time
About Urban Sky Urban Sky is a venture-backed aerospace startup on a mission to pioneer humanity's routine, easy access to the stratosphere and the value locked within it. We design, build, operate, and sell stratospheric balloon systems. The data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of War (DoW), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and Texas and are seeking self-starting, open-minded, and hard-working team members. Position Overview / Onsite / Full-time / Salaried Urban Sky is seeking a Senior Embedded Imaging Software Engineer to own the firmware, imaging pipeline, and data-movement stack behind our electro-optical (EO) and infrared (IR) payloads - from the sensor at the focal plane to the command-and-control link on the ground. You'll write the firmware that drives our cameras and edge compute, own the CUDA image processing pipeline that turns raw pixels into clean, calibrated, geo-tagged imagery, and architect the high-rate data paths and C2 infrastructure that connect the payload to the customer. Your goal: deliver clean, honest imagery. Much of this work proves out in the field - at events, exercises, and customer engagements. Key Responsibilities: Own embedded firmware for our EO and IR payloads: sensor bring-up, driver development, and edge compute on NVIDIA Jetson platforms Integrate cameras and sensors over PCIe, MIPI/CSI, and USB, and develop board-support packages for custom carrier boards, system-on-modules, and companion microcontrollers Own the L0 image processing pipeline running in CUDA at the edge: debayering, white balance, gamma, and camera/lens correction - applied to raw frames before any codec Own IR-specific processing: non-uniformity correction (NUC), bad-pixel replacement, and radiometric calibration Develop multi-frame super-resolution and related computational imaging capabilities Implement imagery metadata (KLV/MISB) so every frame carries accurate pointing, position, and time Architect high-throughput data paths across the vehicle - PCIe as a first-class specialty - and the routing infrastructure that carries imagery, telemetry, and C2 across satellite, tactical-radio, and IP links Optimize for latency, throughput, and determinism, and balance pipeline compute against onboard ML workloads sharing the same CUDA resources Integrate payload firmware with the gimbal and motion-control stack, consuming pointing and autonomy commands from the broader payload software architecture Develop and maintain optical calibrations for our EO/IR payloads - lens distortion modeling, vignetting/flat-field correction, and MTF/sharpness characterization - so imagery quality is measured and repeatable across cameras and flights Implement motion and temporal compensation (frame-to-frame registration, stabilization, and temporal filtering) to maximize effective image quality from a moving platform Qualifications: Experience building end-to-end camera/imaging systems, from sensor to downstream consumer Working experience with image processing pipelines (debayering, calibration, correction) and CUDA or GPU-accelerated processing Experience with optical calibration and characterization - distortion modeling, vignetting correction, MTF/sharpness measurement - and building the correction steps that apply them in a processing pipeline Familiarity with motion/temporal compensation techniques (registration, stabilization, temporal filtering) for imaging from moving platforms 5+ years developing embedded firmware in C/C++ for embedded Linux and/or bare-metal/RTOS systems Hands-on experience shipping on NVIDIA Jetson or comparable embedded Linux/SoC platforms Deep experience moving high-rate data over PCIe (driver, DMA, endpoint/root-complex level) Solid grounding in networking, data routing, and command-and-control infrastructure Strong hardware debugging skills and comfort working from schematics Nice-to-Haves / Preferred Skills: IR/thermal imaging experience, including NUC and radiometric calibration GStreamer, V4L2, or other imaging/video pipeline frameworks Computational imaging techniques (super-resolution, stacking, HDR) Defense imagery and metadata standards (MISB/KLV, STANAG); defense or mission-critical development experience FPGA workflows or high-speed serial interfaces (SerDes, Aurora, MIPI) Experience with optics and optical hardware Experience with multi-sensor and multispectral fusion - co-registering and combining imagery across sensors and bands into fused data products, in partnership with downstream data teams Requirements: Must be US Citizen or Permanent Resident Must be able to obtain and maintain a US security clearance (an active clearance is a plus) Must be located near Denver, CO or willing to relocate; role is on-site at our Denver headquarters (4800 Race St) Travel expected to support field events, exercises, and customer engagements Benefits: Stock Options Medical, Vision and Dental Flexible PTO Cell Phone Bill Stipend Urban Sky is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. The pay range for this role is: 140,000 - 180,000 USD per year(Denver CO HQ) PI5810b4bf9b36-6921
About Urban Sky Urban Sky is a venture-backed aerospace startup on a mission to pioneer humanity's routine, easy access to the stratosphere and the value locked within it. We design, build, operate, and sell stratospheric balloon systems. The data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of War (DoW), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and Texas and are seeking self-starting, open-minded, and hard-working team members. Position Overview / Onsite / Full-time / Salaried Urban Sky is seeking a Senior Embedded Imaging Software Engineer to own the firmware, imaging pipeline, and data-movement stack behind our electro-optical (EO) and infrared (IR) payloads - from the sensor at the focal plane to the command-and-control link on the ground. You'll write the firmware that drives our cameras and edge compute, own the CUDA image processing pipeline that turns raw pixels into clean, calibrated, geo-tagged imagery, and architect the high-rate data paths and C2 infrastructure that connect the payload to the customer. Your goal: deliver clean, honest imagery. Much of this work proves out in the field - at events, exercises, and customer engagements. Key Responsibilities: Own embedded firmware for our EO and IR payloads: sensor bring-up, driver development, and edge compute on NVIDIA Jetson platforms Integrate cameras and sensors over PCIe, MIPI/CSI, and USB, and develop board-support packages for custom carrier boards, system-on-modules, and companion microcontrollers Own the L0 image processing pipeline running in CUDA at the edge: debayering, white balance, gamma, and camera/lens correction - applied to raw frames before any codec Own IR-specific processing: non-uniformity correction (NUC), bad-pixel replacement, and radiometric calibration Develop multi-frame super-resolution and related computational imaging capabilities Implement imagery metadata (KLV/MISB) so every frame carries accurate pointing, position, and time Architect high-throughput data paths across the vehicle - PCIe as a first-class specialty - and the routing infrastructure that carries imagery, telemetry, and C2 across satellite, tactical-radio, and IP links Optimize for latency, throughput, and determinism, and balance pipeline compute against onboard ML workloads sharing the same CUDA resources Integrate payload firmware with the gimbal and motion-control stack, consuming pointing and autonomy commands from the broader payload software architecture Develop and maintain optical calibrations for our EO/IR payloads - lens distortion modeling, vignetting/flat-field correction, and MTF/sharpness characterization - so imagery quality is measured and repeatable across cameras and flights Implement motion and temporal compensation (frame-to-frame registration, stabilization, and temporal filtering) to maximize effective image quality from a moving platform Qualifications: Experience building end-to-end camera/imaging systems, from sensor to downstream consumer Working experience with image processing pipelines (debayering, calibration, correction) and CUDA or GPU-accelerated processing Experience with optical calibration and characterization - distortion modeling, vignetting correction, MTF/sharpness measurement - and building the correction steps that apply them in a processing pipeline Familiarity with motion/temporal compensation techniques (registration, stabilization, temporal filtering) for imaging from moving platforms 5+ years developing embedded firmware in C/C++ for embedded Linux and/or bare-metal/RTOS systems Hands-on experience shipping on NVIDIA Jetson or comparable embedded Linux/SoC platforms Deep experience moving high-rate data over PCIe (driver, DMA, endpoint/root-complex level) Solid grounding in networking, data routing, and command-and-control infrastructure Strong hardware debugging skills and comfort working from schematics Nice-to-Haves / Preferred Skills: IR/thermal imaging experience, including NUC and radiometric calibration GStreamer, V4L2, or other imaging/video pipeline frameworks Computational imaging techniques (super-resolution, stacking, HDR) Defense imagery and metadata standards (MISB/KLV, STANAG); defense or mission-critical development experience FPGA workflows or high-speed serial interfaces (SerDes, Aurora, MIPI) Experience with optics and optical hardware Experience with multi-sensor and multispectral fusion - co-registering and combining imagery across sensors and bands into fused data products, in partnership with downstream data teams Requirements: Must be US Citizen or Permanent Resident Must be able to obtain and maintain a US security clearance (an active clearance is a plus) Must be located near Denver, CO or willing to relocate; role is on-site at our Denver headquarters (4800 Race St) Travel expected to support field events, exercises, and customer engagements Benefits: Stock Options Medical, Vision and Dental Flexible PTO Cell Phone Bill Stipend Urban Sky is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. The pay range for this role is: 140,000 - 180,000 USD per year(Denver CO HQ) PI7e7d82f519b2-6921
09/25/2026
Full time
About Urban Sky Urban Sky is a venture-backed aerospace startup on a mission to pioneer humanity's routine, easy access to the stratosphere and the value locked within it. We design, build, operate, and sell stratospheric balloon systems. The data we collect supports a wide range of applications, from real-time wildfire monitoring to urban mapping. Our technology is also employed by government customers including the Department of War (DoW), NASA, and others. Urban Sky sends flight vehicles to the stratosphere on a weekly basis. Our team consists of engineers, makers, developers, and doers who believe in the power of human potential when passion meets utility within a small, supportive team. At Urban Sky we strive to create a team culture grounded in candor, inclusion, respect and empowerment. We aim to build the next chapter of stratospheric history in Denver and Texas and are seeking self-starting, open-minded, and hard-working team members. Position Overview / Onsite / Full-time / Salaried Urban Sky is seeking a Senior Embedded Imaging Software Engineer to own the firmware, imaging pipeline, and data-movement stack behind our electro-optical (EO) and infrared (IR) payloads - from the sensor at the focal plane to the command-and-control link on the ground. You'll write the firmware that drives our cameras and edge compute, own the CUDA image processing pipeline that turns raw pixels into clean, calibrated, geo-tagged imagery, and architect the high-rate data paths and C2 infrastructure that connect the payload to the customer. Your goal: deliver clean, honest imagery. Much of this work proves out in the field - at events, exercises, and customer engagements. Key Responsibilities: Own embedded firmware for our EO and IR payloads: sensor bring-up, driver development, and edge compute on NVIDIA Jetson platforms Integrate cameras and sensors over PCIe, MIPI/CSI, and USB, and develop board-support packages for custom carrier boards, system-on-modules, and companion microcontrollers Own the L0 image processing pipeline running in CUDA at the edge: debayering, white balance, gamma, and camera/lens correction - applied to raw frames before any codec Own IR-specific processing: non-uniformity correction (NUC), bad-pixel replacement, and radiometric calibration Develop multi-frame super-resolution and related computational imaging capabilities Implement imagery metadata (KLV/MISB) so every frame carries accurate pointing, position, and time Architect high-throughput data paths across the vehicle - PCIe as a first-class specialty - and the routing infrastructure that carries imagery, telemetry, and C2 across satellite, tactical-radio, and IP links Optimize for latency, throughput, and determinism, and balance pipeline compute against onboard ML workloads sharing the same CUDA resources Integrate payload firmware with the gimbal and motion-control stack, consuming pointing and autonomy commands from the broader payload software architecture Develop and maintain optical calibrations for our EO/IR payloads - lens distortion modeling, vignetting/flat-field correction, and MTF/sharpness characterization - so imagery quality is measured and repeatable across cameras and flights Implement motion and temporal compensation (frame-to-frame registration, stabilization, and temporal filtering) to maximize effective image quality from a moving platform Qualifications: Experience building end-to-end camera/imaging systems, from sensor to downstream consumer Working experience with image processing pipelines (debayering, calibration, correction) and CUDA or GPU-accelerated processing Experience with optical calibration and characterization - distortion modeling, vignetting correction, MTF/sharpness measurement - and building the correction steps that apply them in a processing pipeline Familiarity with motion/temporal compensation techniques (registration, stabilization, temporal filtering) for imaging from moving platforms 5+ years developing embedded firmware in C/C++ for embedded Linux and/or bare-metal/RTOS systems Hands-on experience shipping on NVIDIA Jetson or comparable embedded Linux/SoC platforms Deep experience moving high-rate data over PCIe (driver, DMA, endpoint/root-complex level) Solid grounding in networking, data routing, and command-and-control infrastructure Strong hardware debugging skills and comfort working from schematics Nice-to-Haves / Preferred Skills: IR/thermal imaging experience, including NUC and radiometric calibration GStreamer, V4L2, or other imaging/video pipeline frameworks Computational imaging techniques (super-resolution, stacking, HDR) Defense imagery and metadata standards (MISB/KLV, STANAG); defense or mission-critical development experience FPGA workflows or high-speed serial interfaces (SerDes, Aurora, MIPI) Experience with optics and optical hardware Experience with multi-sensor and multispectral fusion - co-registering and combining imagery across sensors and bands into fused data products, in partnership with downstream data teams Requirements: Must be US Citizen or Permanent Resident Must be able to obtain and maintain a US security clearance (an active clearance is a plus) Must be located near Denver, CO or willing to relocate; role is on-site at our Denver headquarters (4800 Race St) Travel expected to support field events, exercises, and customer engagements Benefits: Stock Options Medical, Vision and Dental Flexible PTO Cell Phone Bill Stipend Urban Sky is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. The pay range for this role is: 140,000 - 180,000 USD per year(Denver CO HQ) PI7e7d82f519b2-6921
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career. The Advanced EOIR team anticipates a near-term need for a Senior Staff Systems Engineer to work as the Technical Lead/Principal Investigator in performing algorithm concept and development work related to advanced electro-optical and infrared (EO/IR) sensing. As the lead of this team, you will guide the team in sensor modeling, signal/image processing, concept development/refinement, customer/sponsor engagement, and AI/ML algorithm development. The team is focused on researching solutions for emerging sensors and mission areas, and as a result of these successes, we have a need for more staff to support the growing range of programs supported. Come join us for this 100% on-site position from Linthicum, MD! What You'll Get To Do: The AEOIR business area has a rapidly growing set of efforts related to EOIR-based concept development, algorithm development, and signal exploitation. These programs span a range of modalities, but share a common theme of developing new techniques to solve challenging problems. As a technical lead, you will guide a diverse team of physicists, systems engineer, signal processing engineers, and AI/ML engineers in developing novel EOIR sensor capabilities and evaluating the performance of these techniques. You will also perform direct technical work to advance the needs for the group. You will develop concepts for novel EO/IR sensors and develop cutting-edge algorithms to meet emerging mission needs. You will analyze data collected from some of the most advanced sensors ever fielded and generate representative synthetic data using high-fidelity, physics-based models. You will lead interactions with external customers and internal leaders, building trust through communicating the technical achievements and capabilities of the group. You will set the technical vision for the group, defining roadmaps and developing internal R&D plans to create and mature novel technologies. A strong candidate for this role has experience in airborne and/or space-based EOIR sensors, experience developing and implementing algorithms, experience leading teams to successful program execution, and strength in customer engagements. Roles and Responsibilities: Lead technical execution of R&D programs Mentor and develop junior team members Develop, integrate, test, and deploy novel EOIR-centric algorithms Build and maintain physics-based sensor models Develop and quantify performance metrics for system performance Understand data quality and artifact impacts Represent system performance in functional and analytical models This position is contingent upon the successful transfer of an active U.S. Government Secret Clearance and the ability to obtain Special Program Access. Basic Qualifications: Bachelor's Degree with 14 years of experience, a master's degree with 12 years of experience, or a PhD with 10 years of experience in Science, Technology, Engineering, Mathematics or related technical fields; an additional 4 years may be considered in lieu of a degree. U.S Citizenship is required. A current/active U.S. Government Secret Clearance Ability to obtain Special Program Access (SAP) Experience as a team lead with successful customer interactions Experience leading junior and peer team members Experience in technical computing languages, e.g. Python or Matlab Experience with airborne and/or space-based EOIR sensors Experience with Physics-based understanding of detection methods for various phenomenologies Preferred Qualifications: Advanced degree in STEM Experience writing technical proposals Experience acting as principal investigator of team lead for R&D programs Experience developing and executing internal research and development projects Current Top Secret clearance, SAP access(es), and/or SCI access Strong communication skills, both for internal and external audiences Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Northrop Grumman has approximately 90,000 employees in all 50 states and in more than 27 countries. We strive to attract and retain the best employees by providing an inclusive work environment wherein employees are receptive to diverse ideas, perspectives, and talents to help solve our toughest customer challenges: to develop and maintain some of the most technically sophisticated products, programs, and services in the world. Our Values. The women and men of Northrop Grumman Corporation are guided by Our Values. They describe our company as we want it to be. We want our decisions and actions to demonstrate these Values. We believe that putting Our Values into practice creates long-term benefits for shareholders, customers, employees, suppliers, and the communities we serve. Our Responsibility. At Northrop Grumman, we are committed to maintaining the highest of ethical standards, embracing diversity and inclusion, protecting the environment, and striving to be an ideal corporate citizen in the community and in the world. Primary Level Salary Range: $184,100.00 - $276,100.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
09/25/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We're looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we'll support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you'll have the resources, support, and team to do some of the best work of your career. The Advanced EOIR team anticipates a near-term need for a Senior Staff Systems Engineer to work as the Technical Lead/Principal Investigator in performing algorithm concept and development work related to advanced electro-optical and infrared (EO/IR) sensing. As the lead of this team, you will guide the team in sensor modeling, signal/image processing, concept development/refinement, customer/sponsor engagement, and AI/ML algorithm development. The team is focused on researching solutions for emerging sensors and mission areas, and as a result of these successes, we have a need for more staff to support the growing range of programs supported. Come join us for this 100% on-site position from Linthicum, MD! What You'll Get To Do: The AEOIR business area has a rapidly growing set of efforts related to EOIR-based concept development, algorithm development, and signal exploitation. These programs span a range of modalities, but share a common theme of developing new techniques to solve challenging problems. As a technical lead, you will guide a diverse team of physicists, systems engineer, signal processing engineers, and AI/ML engineers in developing novel EOIR sensor capabilities and evaluating the performance of these techniques. You will also perform direct technical work to advance the needs for the group. You will develop concepts for novel EO/IR sensors and develop cutting-edge algorithms to meet emerging mission needs. You will analyze data collected from some of the most advanced sensors ever fielded and generate representative synthetic data using high-fidelity, physics-based models. You will lead interactions with external customers and internal leaders, building trust through communicating the technical achievements and capabilities of the group. You will set the technical vision for the group, defining roadmaps and developing internal R&D plans to create and mature novel technologies. A strong candidate for this role has experience in airborne and/or space-based EOIR sensors, experience developing and implementing algorithms, experience leading teams to successful program execution, and strength in customer engagements. Roles and Responsibilities: Lead technical execution of R&D programs Mentor and develop junior team members Develop, integrate, test, and deploy novel EOIR-centric algorithms Build and maintain physics-based sensor models Develop and quantify performance metrics for system performance Understand data quality and artifact impacts Represent system performance in functional and analytical models This position is contingent upon the successful transfer of an active U.S. Government Secret Clearance and the ability to obtain Special Program Access. Basic Qualifications: Bachelor's Degree with 14 years of experience, a master's degree with 12 years of experience, or a PhD with 10 years of experience in Science, Technology, Engineering, Mathematics or related technical fields; an additional 4 years may be considered in lieu of a degree. U.S Citizenship is required. A current/active U.S. Government Secret Clearance Ability to obtain Special Program Access (SAP) Experience as a team lead with successful customer interactions Experience leading junior and peer team members Experience in technical computing languages, e.g. Python or Matlab Experience with airborne and/or space-based EOIR sensors Experience with Physics-based understanding of detection methods for various phenomenologies Preferred Qualifications: Advanced degree in STEM Experience writing technical proposals Experience acting as principal investigator of team lead for R&D programs Experience developing and executing internal research and development projects Current Top Secret clearance, SAP access(es), and/or SCI access Strong communication skills, both for internal and external audiences Northrop Grumman provides a comprehensive benefits package and a work environment which encourages your growth and supports the mutual success of our people and our company. Northrop Grumman benefits give you the flexibility and control to choose the benefits that make the most sense for you and your family. Your benefits will include the following: Health Plan, Savings Plan, Paid Time Off and Additional Benefits including Education Assistance, Training and Development, 9/80 Work Schedule (where available), and much more! Northrop Grumman has approximately 90,000 employees in all 50 states and in more than 27 countries. We strive to attract and retain the best employees by providing an inclusive work environment wherein employees are receptive to diverse ideas, perspectives, and talents to help solve our toughest customer challenges: to develop and maintain some of the most technically sophisticated products, programs, and services in the world. Our Values. The women and men of Northrop Grumman Corporation are guided by Our Values. They describe our company as we want it to be. We want our decisions and actions to demonstrate these Values. We believe that putting Our Values into practice creates long-term benefits for shareholders, customers, employees, suppliers, and the communities we serve. Our Responsibility. At Northrop Grumman, we are committed to maintaining the highest of ethical standards, embracing diversity and inclusion, protecting the environment, and striving to be an ideal corporate citizen in the community and in the world. Primary Level Salary Range: $184,100.00 - $276,100.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are seeking capable, talented, and motivated team-contributors at our Northrop Grumman Rolling Meadows site. Our products range from advanced sensing technologies to state-of-the-art targeting and tracking systems that are deployed in Electro-Optical Infrared (EOIR) and Radio Frequency Electronic Warfare (RFEW) systems. These systems are designed, developed, built, integrated, and tested by the capable folks at our company to protect the lives of US and Allied warfighters in present and future conflicts. Come join a culture where your voice is valued and start contributing to our team of passionate professionals providing real-life solutions to our world's biggest challenges. We take pride in creating purposeful work and allowing our employees to grow and achieve their goals every day by Defining Possible. With our competitive pay and comprehensive benefits, we have the right opportunities to fit your life and launch your career today. If you are interested in consideration to be included as a part of this team, we would invite you to apply. What You Will Get to Do: As an integral part of our Systems Security Engineering team, you will be responsible for providing hands-on experience in the development of sensor payloads and secure mission security solutions supporting our hardware and software security solutions to tip of the spear warfighters. Roles & Responsibilities: Demonstrate full life cycle Systems Engineering development experience in Anti-Tamper and/or Cybersecurity, to include architecture design, trade studies, requirements formulation, detailed design, unit testing, system testing, and validation and verification practices. Support the development and implementation of hardware and software Anti-Tamper and/or CyberSecurity techniques and countermeasures to protect assets and enhance operational integrity and reliability. Implement and ensure compliance with US Government policies (e.g., JSIG, DAAPM, NIST 800-53, CNSSI 1253, DODI 5200.39, etc.) by supporting secure architecting of systems, reviewing processes, tailoring controls, approving documented procedures and artifacts, and overseeing security testing and analysis. Conduct thorough analyses to validate existing security requirements and develop additional safeguards as necessary to enhance system security. Collaborate with the US Government and program teams to negotiate and develop Anti-Tamper / CyberSecurity solutions for international export markets, ensuring the security of compliance with Tri-Service Committee and Red Team requirements for US-deployed and exported military systems. Utilize reverse engineering techniques to architect and validate effective security Anti-Tamper / CyberSecurity solutions. Conduct Technical Release Analyses in accordance with US Government security governance, service policies, and licensing precedents. Prepare, assess, and certify Controlled Unclassified Information and higher information and Critical Program Information determinations for licensing. Coordinate Technology Release efforts with program personnel by engaging relevant stakeholders and Subject Matter Experts (SMEs) to ensure successful outcomes, to include development and delivery of training on Technology Release processes to program personnel. Manage and communicate the necessary analyses and modifications for system, subsystem, or sensor exportability, ensuring compliance with international standards. Apply intermediate understanding of cryptographic security protocols to safeguard sensitive information. Support formal Security Test and Evaluation (ST&E) processes mandated by US Government authorities through comprehensive pre-test preparations, active participation in testing, result analysis, and the preparation of required reports. Document findings from Assessment and Authorization activities, as well as technical and coordination efforts, while preparing and maintaining the system Security Plans and updating the Plan of Actions and Milestones (POA&M). Support strategic planning for Anti-Tamper and CyberSecurity technology development that aligns with global strategic priorities and influences current and future policies. Collaborate effectively with program teams and global Business Development stakeholders to incorporate international requirements and features into design processes and drive product line initiatives for global market success. Actively participate in communities of practice to enhance domain knowledge and foster continuous professional development throughout the organization. This position will be full-time, on-site at our Rolling Meadows, IL location. This position may be contingent upon Funding/Contract award, special access program and acquiring and maintaining the necessary US Government security clearance per customers' requirements prior to start. Basic Qualifications for Principal Systems Security Engineer: Bachelor's degree in a Science, Engineering, or Mathematics field with 5 years of related experience; OR a Master's degree in a STEM field with 3 years of related experience; OR a PhD in a STEM field with 1 year of related experience Two (2) years of Systems Engineering experience with DoD platforms/systems, sensors, and/or sub-systems. E.g. EO/IR, Embedded Software or Cryptography, Satellite, Architecture development, Hardware design, RF, Radar and Undersea Sensors, etc. Two (2) years of experience, individually or collectively, in one or more of the following areas: Anti-Tamper or Cybersecurity Cybersecurity Risk Management Framework Cybersecurity Resiliency Reverse Engineering Security requirements development System Security Integration & Testing Security Validation and verification Ability to obtain and maintain a minimum of a Secret Clearance with additional customer specified clearance Preferred Qualifications for Principal Systems Security Engineer: Advanced degrees in Science, Technology, Engineering or Mathematics or related technical fields Active Secret or Top-Secret clearance Experience with Systems Security Engineering development of DoD weapon systems Experience with Hardware (Firmware) Assurance, Attack Surface Analysis and Reporting, Software/Firmware Encryption, and Secure Key Handling Experience with identifying and mitigating software vulnerabilities and performing integration testing of mitigations Experience with contributing to and/or making technical presentations to internal and external customers Primary Level Salary Range: $108,800.00 - $163,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
09/24/2026
Full time
RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are seeking capable, talented, and motivated team-contributors at our Northrop Grumman Rolling Meadows site. Our products range from advanced sensing technologies to state-of-the-art targeting and tracking systems that are deployed in Electro-Optical Infrared (EOIR) and Radio Frequency Electronic Warfare (RFEW) systems. These systems are designed, developed, built, integrated, and tested by the capable folks at our company to protect the lives of US and Allied warfighters in present and future conflicts. Come join a culture where your voice is valued and start contributing to our team of passionate professionals providing real-life solutions to our world's biggest challenges. We take pride in creating purposeful work and allowing our employees to grow and achieve their goals every day by Defining Possible. With our competitive pay and comprehensive benefits, we have the right opportunities to fit your life and launch your career today. If you are interested in consideration to be included as a part of this team, we would invite you to apply. What You Will Get to Do: As an integral part of our Systems Security Engineering team, you will be responsible for providing hands-on experience in the development of sensor payloads and secure mission security solutions supporting our hardware and software security solutions to tip of the spear warfighters. Roles & Responsibilities: Demonstrate full life cycle Systems Engineering development experience in Anti-Tamper and/or Cybersecurity, to include architecture design, trade studies, requirements formulation, detailed design, unit testing, system testing, and validation and verification practices. Support the development and implementation of hardware and software Anti-Tamper and/or CyberSecurity techniques and countermeasures to protect assets and enhance operational integrity and reliability. Implement and ensure compliance with US Government policies (e.g., JSIG, DAAPM, NIST 800-53, CNSSI 1253, DODI 5200.39, etc.) by supporting secure architecting of systems, reviewing processes, tailoring controls, approving documented procedures and artifacts, and overseeing security testing and analysis. Conduct thorough analyses to validate existing security requirements and develop additional safeguards as necessary to enhance system security. Collaborate with the US Government and program teams to negotiate and develop Anti-Tamper / CyberSecurity solutions for international export markets, ensuring the security of compliance with Tri-Service Committee and Red Team requirements for US-deployed and exported military systems. Utilize reverse engineering techniques to architect and validate effective security Anti-Tamper / CyberSecurity solutions. Conduct Technical Release Analyses in accordance with US Government security governance, service policies, and licensing precedents. Prepare, assess, and certify Controlled Unclassified Information and higher information and Critical Program Information determinations for licensing. Coordinate Technology Release efforts with program personnel by engaging relevant stakeholders and Subject Matter Experts (SMEs) to ensure successful outcomes, to include development and delivery of training on Technology Release processes to program personnel. Manage and communicate the necessary analyses and modifications for system, subsystem, or sensor exportability, ensuring compliance with international standards. Apply intermediate understanding of cryptographic security protocols to safeguard sensitive information. Support formal Security Test and Evaluation (ST&E) processes mandated by US Government authorities through comprehensive pre-test preparations, active participation in testing, result analysis, and the preparation of required reports. Document findings from Assessment and Authorization activities, as well as technical and coordination efforts, while preparing and maintaining the system Security Plans and updating the Plan of Actions and Milestones (POA&M). Support strategic planning for Anti-Tamper and CyberSecurity technology development that aligns with global strategic priorities and influences current and future policies. Collaborate effectively with program teams and global Business Development stakeholders to incorporate international requirements and features into design processes and drive product line initiatives for global market success. Actively participate in communities of practice to enhance domain knowledge and foster continuous professional development throughout the organization. This position will be full-time, on-site at our Rolling Meadows, IL location. This position may be contingent upon Funding/Contract award, special access program and acquiring and maintaining the necessary US Government security clearance per customers' requirements prior to start. Basic Qualifications for Principal Systems Security Engineer: Bachelor's degree in a Science, Engineering, or Mathematics field with 5 years of related experience; OR a Master's degree in a STEM field with 3 years of related experience; OR a PhD in a STEM field with 1 year of related experience Two (2) years of Systems Engineering experience with DoD platforms/systems, sensors, and/or sub-systems. E.g. EO/IR, Embedded Software or Cryptography, Satellite, Architecture development, Hardware design, RF, Radar and Undersea Sensors, etc. Two (2) years of experience, individually or collectively, in one or more of the following areas: Anti-Tamper or Cybersecurity Cybersecurity Risk Management Framework Cybersecurity Resiliency Reverse Engineering Security requirements development System Security Integration & Testing Security Validation and verification Ability to obtain and maintain a minimum of a Secret Clearance with additional customer specified clearance Preferred Qualifications for Principal Systems Security Engineer: Advanced degrees in Science, Technology, Engineering or Mathematics or related technical fields Active Secret or Top-Secret clearance Experience with Systems Security Engineering development of DoD weapon systems Experience with Hardware (Firmware) Assurance, Attack Surface Analysis and Reporting, Software/Firmware Encryption, and Secure Key Handling Experience with identifying and mitigating software vulnerabilities and performing integration testing of mitigations Experience with contributing to and/or making technical presentations to internal and external customers Primary Level Salary Range: $108,800.00 - $163,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.
Job Description Job Description Peak Systems is a preferred provider of cutting-edge data center solutions, delivering reliable and scalable infrastructure to support our clients' critical operations. We are seeking skilled Data Center Technicians to join our team and ensure seamless server deployments. As a Data Center Technician , you will be responsible for performing on-site server rack roll-ins, cable management, transceiver installation, and related tasks to obtain optimal data center operations. This role requires a detail-oriented individual with hands-on technical skills and a commitment to safety and efficiency. Location: Spartanburg SC Start Date: Monday, September 21st Shift: 8:00 AM start (8-10 hour days) Pay: $30+/hour (based on experience) Responsibilities: Server Rack Roll-In : Safely transport, install, and secure server racks in designated data center locations, ensuring proper alignment and stability. Cable Management : Organize, route, and label data and power cables to maintain a clean, efficient, and safe environment, adhering to industry standards. Transceiver Installation : Install, test, and troubleshoot optical transceivers to ensure reliable network connectivity. Equipment Setup : Assist in the installation and configuration of servers, networking equipment, and related hardware. Documentation : Maintain accurate records of installations, cabling layouts, labeling, and inventory. Safety Compliance : Adhere to data center safety protocols, including proper handling of equipment and use of personal protective equipment (PPE). Collaboration : Work closely with data center engineers, facilities teams, and vendors to support operational goals. Qualifications: Experience : 2-3+ years of experience in data center operations, IT hardware installation, or a related technical role. Technical Skills : Proficiency in server rack installation, cable management, and transceiver installation techniques. Familiarity with data center infrastructure, including power distribution and cooling systems. Knowledge of networking concepts (e.g., Ethernet, fiber optics, and transceiver compatibility). Physical Requirements : Ability to lift and move heavy equipment (up to 50 lbs) and work in confined spaces. Comfortable standing, bending, and reaching for extended periods. Soft Skills : Strong attention to detail and organizational skills. Excellent problem-solving and communication abilities. Ability to work independently and in a team environment. Certifications (Preferred): CompTIA Server+, Data Center Technician, or equivalent. OSHA 10 or similar safety training. Availability : Willingness to work flexible hours, including nights, weekends, or on-call shifts as needed. Join our team and be a key player in building and maintaining cutting-edge IT infrastructure! Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments. Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments.
09/18/2026
Full time
Job Description Job Description Peak Systems is a preferred provider of cutting-edge data center solutions, delivering reliable and scalable infrastructure to support our clients' critical operations. We are seeking skilled Data Center Technicians to join our team and ensure seamless server deployments. As a Data Center Technician , you will be responsible for performing on-site server rack roll-ins, cable management, transceiver installation, and related tasks to obtain optimal data center operations. This role requires a detail-oriented individual with hands-on technical skills and a commitment to safety and efficiency. Location: Spartanburg SC Start Date: Monday, September 21st Shift: 8:00 AM start (8-10 hour days) Pay: $30+/hour (based on experience) Responsibilities: Server Rack Roll-In : Safely transport, install, and secure server racks in designated data center locations, ensuring proper alignment and stability. Cable Management : Organize, route, and label data and power cables to maintain a clean, efficient, and safe environment, adhering to industry standards. Transceiver Installation : Install, test, and troubleshoot optical transceivers to ensure reliable network connectivity. Equipment Setup : Assist in the installation and configuration of servers, networking equipment, and related hardware. Documentation : Maintain accurate records of installations, cabling layouts, labeling, and inventory. Safety Compliance : Adhere to data center safety protocols, including proper handling of equipment and use of personal protective equipment (PPE). Collaboration : Work closely with data center engineers, facilities teams, and vendors to support operational goals. Qualifications: Experience : 2-3+ years of experience in data center operations, IT hardware installation, or a related technical role. Technical Skills : Proficiency in server rack installation, cable management, and transceiver installation techniques. Familiarity with data center infrastructure, including power distribution and cooling systems. Knowledge of networking concepts (e.g., Ethernet, fiber optics, and transceiver compatibility). Physical Requirements : Ability to lift and move heavy equipment (up to 50 lbs) and work in confined spaces. Comfortable standing, bending, and reaching for extended periods. Soft Skills : Strong attention to detail and organizational skills. Excellent problem-solving and communication abilities. Ability to work independently and in a team environment. Certifications (Preferred): CompTIA Server+, Data Center Technician, or equivalent. OSHA 10 or similar safety training. Availability : Willingness to work flexible hours, including nights, weekends, or on-call shifts as needed. Join our team and be a key player in building and maintaining cutting-edge IT infrastructure! Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments. Company Description For over 30 years, we've helped technology professionals build strong, rewarding careers by offering exposure to Fortune 500 clients and top-tier projects. Whether you're looking to expand your experience in data centers, AI infrastructure, field services, project management, or enterprise IT, we can connect you with exciting opportunities that help you build your career, develop new skills, and work on cutting-edge technology deployments.
