26 jobs found

We are seeking an experienced Wire and Ram EDM Programmer/Operator to join our precision parts manufacturing team. Responsibilities: Program, set up, and operate Wire EDM and Ram (Sinker) EDM machines. Read and interpret blueprints, CAD models, and GD&T requirements. Produce complex, tight-tolerance precision metal components. Perform first-piece, in-process, and final inspections prior to bring to quality department. Troubleshoot machining and programming issues. Maintain quality and production documentation. Qualifications: 3+ years of Wire EDM and/or Ram EDM experience. Ability to independently program, set up, and operate EDM equipment. Strong blueprint reading and GD&T knowledge. Experience with precision machining preferred. Strong problem-solving and attention to detail. Benefits: Competitive pay based on experience Health insurance 401(k) Paid vacation and holidays Advancement opportunities

Job Description Job Description Shifts available:1st, 2nd, 3rd and WeekendDuties may include:Assemble, measure, weigh, mark, label, count, blend, track, record, inspect, package, and palletize various products or materials. Set up and use various hand and power tools to finish edges, remove flash, clear holes, saw, sand, grind, blast clean or trim molded metal or plastic parts.Use hand tools to clean, paste and assemble sand cores. Rotate to operate numerous machines to fabricate products ranging from simple to elaborate. Setups and dismantles simple to complicated machine fabricating equipment according to instructions, including the flow of lubricants, pressure, and depth of stroke, and installing, positioning, and aligning molds/dies using measuring tools such as rules, micrometers, gauges, feelers, and hand tools.Assist with or perform routine maintenance, lesser repairs, or cleaning Operate a forklift - to move and store products and load and unload trucks.Enter information and interact with computer software and documents.Alloy, transfer, and pour molten metal into molds, ladles, and bull ladlesRegulate furnace/metal temperature; stirring, fluxing, and skimming off dross.Inspect for quality, defects, and deviations from specifications. Troubleshoot and resolve problemsMonitor for unsatisfactory quality or unusual operating conditions and alert the appropriate SupervisorInstructs others on work instructions and specific techniques. Responsible for quality of work and to appropriately resolve unusual operating conditions. Willingly modifies work schedule and duties to accommodate Company needs-all other duties as assigned. Monitors for unsatisfactory quality or unusual operating conditions and alerts appropriate Supervisor.May require successful completion of specific education, training or certifications. Minimum Education: Reading and understanding English language work instructions and some computer usePreferred Education: Some trade school or equivalentMinimum Skills/Experience: Effective computer experience, Independent decision-making, and effective self-management. One or more years of relevant work experiencePreferred Skills/Experience: One to three or more years of relevant experience. Demonstrated mechanical aptitude, plus Strong mechanical aptitude and proven machine operations and/or mechanical aptitude, effective computer use, basic Math skills, independent decision-making, and effective self- management.Functional RequirementsConsistently able to:Manually lift and move product and materials up to 50 lbs. through regular physical exertion, including but not limited to reach forward, reach overhead, lift, carry, crouch, and bendPower grip and wrist turn, including the use of hand tools and/or steering fork truckWalk, sit, or stand for up to 12 hours with intermittent breaksPush/pull up to 100 lbs.See, inspect, handle and evaluate product qualityRead and understand written English language work instructionsWork in non-climate controlled environments, including hot and humid conditionsClimb ladders and stairs of varying heightsWear task-based Personal Protective Equipment (PPE) provided by LSIProtective FootwearHearing ProtectionProtective EyewearGlovesAdditional PPE may as required by specific tasksIndustry Leading Benefits:Generous medical/dental insurance planFlexible PTO/UTO policy401k with company matchCompany-paid Short-term disabilityEmployee assistance planCareer advancementFormal leadership developmentEducation reimbursement programRecognition and awardsEmployee events (fishing contests, Christmas turkeys, potlucks, appreciation meals, and more)Similar job titles operator, tender, handler, tender, treatThis job posting does cover or contain a comprehensive listing of activities, duties, or responsibilities required. Duties, responsibilities, and activities may change at any time with or without notice.EEO/AA/M/W/Vet/Disability Job Posted by ApplicantPro

Job Description Job Description ESSENTIAL FUNCTIONS: An individual in this position must be able to successfully perform the essential duties and responsibilities listed below. This list shall not be construed as the only duties that may be assigned for the position. Create, maintain, and run detailed CMM programs for in-house production parts, purchased components, and sub-contract machined parts. Prepare detailed inspection reports; provide input and direction to other inspectors, machine operators, engineering and purchasing personnel, and outside suppliers based on inspection results. Determine program requirements based on design and engineering part-specific requirements. Maintain the CMM equipment to ensure it is functioning properly, the calibration schedule is adhered to, and the software is up to date. Provide support to the Inspection Department by inspecting components, calibrating gauges, and performing other tasks as needed. QUALIFICATIONS: Education Associates degree or some technical training preferred. Experience and/or Training 3 years of related experience Knowledge of gage calibration. Ability to read and interpret drawings. Technology/Equipment Knowledge of Zeiss Calypso software preferred but not required. Familiar with the requirements of ISO9001:2015. COMPANY BENEFITS Dynex offers competitive pay and an excellent benefit package, including: Comprehensive medical plan with employer contribution Health Savings Account Dental and vision plans 401(k) retirement plan with generous company contributions Employer-paid: Group term life insurance Accidental death and dismemberment Short-term disability Training opportunities Employee Assistance Program (EAP) Long-term disability Voluntary life insurance options Paid Time Off (PTO) Up to 13 paid Holiday days, includes building shut down the week of 4th of July. Tuition Reimbursement Program Company Description Dynex/Rivett Inc. is a global leading manufacturer of high-pressure hydraulic equipment used on mobile and industrial machinery. Our pumps, valves, motors, and power units are sold worldwide through offices in Pewaukee, WI, Ashland, MA, Eaton Socon, UK, and Dubai, UAE. We offer a small-company environment that fosters teamwork and innovation. We use advanced manufacturing processes with the latest and most sophisticated CNC machines in a clean, well-lit working environment. Our people, work environment and location allow us to attract the best people to achieve our success. We welcome you to join us! Company Description Dynex/Rivett Inc. is a global leading manufacturer of high-pressure hydraulic equipment used on mobile and industrial machinery. Our pumps, valves, motors, and power units are sold worldwide through offices in Pewaukee, WI, Ashland, MA, Eaton Socon, UK, and Dubai, UAE. We offer a small-company environment that fosters teamwork and innovation. We use advanced manufacturing processes with the latest and most sophisticated CNC machines in a clean, well-lit working environment. Our people, work environment and location allow us to attract the best people to achieve our success. We welcome you to join us!

Job Description Job Description Location: Poway, CA Job Type: Full-time (40 hours/week), Non-exempt (hourly), In-Person Department: Quality Reports To: Quality Manager About the Role: The purpose of this position is to support the Quality Departments ability to achieve its goals. This includes accurate and timely programming and inspection of parts as well as review of incoming material, work-in-process and customer shipments to achieve AMT quality and business objectives and comply with AS9100 standards. Other duties may be assigned as needed. Key Responsibilities: Load parts, fixtures, and probes; execute existing CMM programs. Write, develop, validate and debug measuring machine programs and provide the supporting documentation for CMM inspections. Communicate with all machinists, supervisors, and engineers to meet customer/shop floor needs. Troubleshoot and solve both machine issues and related problems in the measuring process. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to AMT, customer and AS9100 standards. Complete customer PPAP requirements including control plans and inspection reports. Perform incoming material inspection tasks according to AS 9100 procedures and counterfeit awareness per AS6174. Perform final inspection according to AS 9100 procedures. Perform process and manufacturing audits and follow-up with corrective actions. Cross train across multiple departments as needed. Perform data collection and communication tasks in ERP and other applications. Comply with all Advanced Machining and Tooling policies and procedures Other duties as assigned. Qualifications: 3+ years of CMM operating and 1+ years of CMM programming. Strong specific knowledge of blueprint reading, GD&T, setup, tooling and fixture techniques. Ability to create inspection reports, perform 1st article/in-process/final inspection reports. Knowledge of inspection tool usage such as Micrometers, Calipers etc. Good typing skills and ability to use software such as word, excel etc. Knowledge of how CAD models work. Demonstrated critical thinking abilities and root cause analysis. Strong attention to detail and accuracy. Proficient use of shop arithmetic and strong math skills. Awareness of general safety, and quality systems. High School Diploma or GED. Nice to Have: Bachelor's degree in mechanical engineering or related discipline. Rock skills. Specific applied knowledge of aerospace quality procedures and AS9100. Knowledge of non-destructive testing, metal finish processes, Metallurgy and heat treatment processes Working knowledge of CNC machining, tool, fixture, work-holding and die design. Ability to understand CMM reports. Total Rewards Package The hourly pay range for this position is $30 - $45 per hour (depending on experience). This is a permanent, non-exempt (hourly), full-time position. Medical Coverage Dental Coverage Vision Coverage 10 days paid vacation annually 5 days of paid sick leave annually 401K Plan with matching 12 Paid Holidays Additional Benefits: Flexible spending account Life insurance Parental leave Professional development assistance Employee Assistance Program Work Authorization/Security Clearance The company requires access to information, or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US citizens, or to other unauthorized individuals. This position is subject to a background check, drug test, and reference check. Must be a United States Citizen, or US Permanent Resident. AAP/EEO Statement Advanced Machining and Tooling LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Ability to commute/relocate to work location: Poway, CA 92064: Reliably commute or planning to relocate before starting work (Required) Why Join Us: AMT is a place full of hardworking people creating things. We are service orientated and work to always take good care of our customers and our people. It's also a place where people are given opportunities to learn and grow with the support of our hi Monday - Friday 7:00 AM - 3:30 PM PST 40 hours weekly with the potential for optional overtime

Job Description Job Description I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. C. Respirators, half mask cartridge respirators plus goggles, or full face cartridge respirators may be required in designated areas or under prescribed work conditions. VIII. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description POSITION TITLE: Senior Controls and Automation Engineer DEPARTMENT: Engineering REPORTS TO: Engineering Manager LOCATION: Viola JOB SUMMARY: A Senior Controls & Automation Engineer to design, build, and support custom automated test equipment, manufacturing systems, and embedded control solutions for powertrain development and production support.This role bridges industrial automation, embedded hardware/firmware, and system integration, supporting everything from robotic test cells and PLC-controlled machinery to ECU-integrated embedded devices and Windows-based engineering tools. The ideal candidate is a hands-on engineer comfortable working across electrical design, firmware, PLCs, robotics, HMIs, and on-site commissioning of one-off and low-volume systems ESSENTIAL FUNCTIONS: Industrial Automation & Controls Design, modify, and maintain automated test stands, endurance systems, and manufacturing equipment Program and troubleshoot PLCs and HMIs for presses, test fixtures, and special-purpose machinery Integrate industrial robots with presses and test systems, including interlocks and safety logic Retrofit and modernize legacy equipment where original electronics or controls are obsolete Support and repair custom, one-off automation equipment used in engineering and manufacturing Embedded Hardware & Firmware Design custom embedded control hardware for test systems and product prototypes Develop firmware in C/C++ for microcontroller-based controllers Implement CAN bus communication with ECUs and vehicle subsystems Create embedded solutions for sensors, actuators, motor control, and data acquisition Support prototype development through testing, iteration, and limited production readiness Test Systems & Instrumentation Develop automated engine and motorcycle test systems for endurance, EPA mileage accumulation, and performance testing Build systems for dyno automation, robotic control, and long-duration unattended operation Integrate sensors, cameras, and data acquisition hardware for mechanical and powertrain analysis Develop data visualization and processing tools for test and lab environments Software & Interfaces Develop Windows-based engineering and test applications (Visual Studio / C#) Interface off-the-shelf HMIs and custom hardware for operator control and remote monitoring Support configuration and calibration tools for embedded and test systems ECU & System Integration Integrate and interface with automotive ECUs, including CAN messaging and control features Support ECU feature development and experimentation for R&D projects Work closely with engineering and manufacturing teams to support powertrain development Reverse engineer CAN bus data in order to interface various ECUs with custom test equipment QUALIFICATIONS: Bachelor's degree in Electrical Engineering, Computer Engineering, Mechatronics, or equivalent experience 5+ years experience in industrial automation, controls engineering, or custom machinery Strong experience with: PLC programming and industrial I/O Embedded firmware development (C/C++) Electrical schematics and hardware design, PCB layout. Sensors, actuators, motors, VFDs, and safety circuits Hands-on experience commissioning and troubleshooting machines in real-world environments

Job Description Job Description Are You the Person Everyone Calls When the Plant Stops? You may currently be called a controls technician, automation specialist, PLC programmer, electrical technician, maintenance technician, or controls engineer. Your title and degree matter less to us than your ability to understand a complex industrial system, find the real source of a problem, and make it work. Factory Systems is looking for a smart, hands-on industrial problem-solver who understands that a production system is more than its PLC. Machines, sensors, wiring, drives, networks, computers, databases, software, operators, and processes all must work together. We need someone who can determine which part is actually causing the problem and take ownership of fixing it. The strongest candidate may be largely self-taught. You may have learned industrial automation because you were curious, because nobody else could solve the problem, or because keeping the plant running depended on you. If you are ready to leave shift maintenance and the daily production-floor grind for a clean, professional engineering environment with greater variety, autonomy, and technical responsibility, we would like to talk with you. What You Will Do Support industrial controls, manufacturing software, and connected production systems Troubleshoot problems involving PLCs, HMIs, sensors, drives, wiring, industrial networks, Windows computers, databases, and production equipment Take ownership of customer problems from the initial call through final resolution Determine whether a problem is electrical, mechanical, controls-related, network-related, software-related, or operational Connect both modern and legacy production equipment to data-collection and manufacturing-information systems Modify and maintain PLC and HMI applications Support industrial computers, workstations, databases, communications, and system interfaces Perform remote troubleshooting and travel to customer facilities when on-site work is necessary Assist with system installation, commissioning, upgrades, backups, and recovery Document system configurations, changes, and effective troubleshooting procedures Identify recurring problems and develop standardized, repeatable solutions Help less-experienced team members develop practical troubleshooting and implementation skills Work directly with customer maintenance, engineering, production, and IT personnel Escalate genuine architectural, safety, or high-risk issues when appropriate We are looking for someone who: Is naturally curious about how machines and industrial systems work Enjoys solving problems that cross traditional technical boundaries Can troubleshoot logically instead of changing parts until something works Is comfortable working independently and asking for help when appropriate Takes personal ownership of problems and follows them through resolution Can explain technical issues clearly to both technical and nontechnical people Is dependable and understands the importance of supporting operating production systems Wants broader challenges and greater responsibility than maintaining the same equipment every day Values practical accomplishment more than titles or organizational status Desired Experience Candidates should have approximately three or more years of hands-on experience in industrial automation, plant maintenance, manufacturing systems, machine building, systems integration, or a similar environment. Useful experience includes: Allen-Bradley/Rockwell or Siemens PLCs HMI or SCADA configuration and troubleshooting Variable-frequency drives, servos, sensors, and industrial instrumentation Industrial Ethernet and machine networks OPC Classic, OPC UA, Ethernet/IP, Modbus, or vendor-specific protocols RS-232, RS-485, and other legacy communications Microsoft Windows computers and basic network troubleshooting Microsoft SQL Server or other relational databases Manufacturing data collection, production tracking, OEE, quality, or reporting systems CNC equipment, robots, assembly equipment, test systems, or other automated machinery Electrical drawings, control panels, and field wiring System commissioning and production startup You do not need experience in every area listed above. We are more interested in your ability to learn, troubleshoot, and connect the pieces than in matching every keyword. Education A degree is not required. An associate degree, engineering-technology degree, technical-school education, military technical training, apprenticeship, or relevant industry certifications are useful. Demonstrated hands-on ability and a history of solving difficult industrial problems are more important than formal credentials. The Working Environment This position is based primarily at our Columbia facility in a clean, professional engineering environment. It is not a shift-maintenance position, although occasional customer emergencies and site travel are part of supporting industrial systems. The pressure here is different from the daily production-floor grind. You will be expected to: Learn unfamiliar equipment and processes Manage several priorities Communicate directly with customers Exercise sound judgment Take responsibility for delivering a working solution In return, you will have greater variety, technical autonomy, visibility, and the opportunity to grow into broader system and project responsibility. Employment Requirements Reliable transportation and the ability to commute consistently to our Columbia facility Ability and willingness to travel periodically to customer sites Ability to work safely in industrial environments when visiting customer facilities Legal authorization to work in the United States without current or future employer sponsorship Ability to satisfy applicable export-control and customer-facility access requirements About Factory Systems Factory Systems develops and supports industrial controls, manufacturing software, machine-connectivity systems, data-acquisition solutions, and custom production technology. Our work spans software, controls, networks, databases, machinery, test equipment, and manufacturing operations. We support established, mission-critical production systems while developing new connected-factory and digital-transformation solutions. We value curiosity, practical ability, accountability, and people who take pride in making complicated systems work. Company Description Symbrium is often referred to by our customers as "an engineer's engineering company." We deliver next generation process verification, specialized manufacturing equipment, and enterprise quality management software to some of the top engineering and manufacturing organizations around the world.

Job Description Job Description Position Location: Hanscom AFB, OH (on-site) Makai is seeking a Project Manager with significant Scrum Master experience to lead efforts directly associated with the Air Force (AF) C3BM (Command and Control, Battle Management) PEO Director of Engineering. Responsibilities include oversight for the architecture, design, analysis and implementation of digital twin models (for AF networks and systems), support the identification and integration of emerging technologies, and support of a newly designed and approved NetWorthiness process. Scrum Master duties involve working closely with AF senior leaders and cross-functional teams and stakeholders to develop, document, and implement process/task management procedures. The SCRUM Master / Project Manager will perform the following duties: Essential Duties and Responsibilities The ideal candidate will be responsible for the end-to-end management of the programs and projects supporting Air Force communications systems, ensuring that all objectives are met, and deliveries are completed on time. Serving in a cross functional role as SCRUM Master / Project Manager, supporting the C3BM Governance Directorate, a seasoned professional will have the ability to work closely with Senior AF Leaders and cross functional engineering teams, responsible for facilitating Agile processes and managing strategic initiatives that enhance the development of governance and oversight processes across mission-critical programs. Your duties will directly support alignment of C3BM governance policies, tracking program milestones, managing risk, and maintaining clear communication with stakeholders. Directly report to senior AF leaders within the AFRL and PEO C3BM organizations Communicate Project and Program status to stakeholders and leadership, through both written and verbal lines of communication Continuously improve program risk management processes and procedures Collaborate with cross-functional teams, including engineers, developers, subject matter experts, and mission operators, to gather insights and expertise on newly developed technologies Assist stakeholders with transformation of analysis to communications acquisition action plans Facilitate Agile ceremonies including daily stand-ups, sprint planning, retrospectives, and reviews Champion Agile principles while aligning with business objectives and timelines. Report on the status of project scope, resources, schedules, risks, and budgets to ensure on-time delivery Track and report performance indicators providing transparency on team progress and project health daily Excellent leadership and communication skills, with the ability to effectively communicate to both technical and non-technical stakeholders during meetings and briefings Flexibility to solve problems using strong analytical skill set Degree/Education and Training Requirements BA/BS in related technical field Experience 5 - 7 years Detailed Oriented Project Manager Ability to Excel in Multiple Environments Meticulous SCRUM Manager Detail Oriented Facilitator Analytical Problem-Solving Experience Advanced Professional Leadership SECURITY CLEARANCE Secret with ability to upgrade to TS/SCI WORKING CONDITIONS Work will be performed inside a large facility. An inside environment may be a cubicle (considerations: close quarters, low to moderate noise, bright or dim lighting). Work assignments vary based on client requirements. Sitting at desk. Phone use and PC or laptop. Filing required. May require lifting and carrying boxes of supplies or files up to 25 lbs. Extended periods of sitting while on PC/laptop or phone. General office equipment, which includes: telephone, fax machine, copier, PC/laptop, and other miscellaneous office equipment. Regular attendance in accordance with established work schedule is mandatory. You may be asked to continue performance during inclement weather or other conditions when others are not permitted to work No regular travel in support of this contract, however ad-hoc travel may be required Employment is contingent upon obtaining all required certifications within the timeframe specified in a waiver by the government (if applicable) and maintaining required certifications through the duration of the contract. Failure to obtain/maintain required certifications will result in disqualification for this position and could result in termination. Candidates must exhibit professional behavior that promotes teamwork, fosters cooperation, and enhances productivity in the workplace. Must be well organized with the ability to coordinate, prioritize and execute multiple tasks simultaneously in a high-pressure environment. Ability to communicate verbally and in writing to work effectively with a variety of government, military and contractor personnel at all levels. Candidates must be able to interface effectively with individuals at all levels of the organization. Grooming and dress is usually business casual, but dependent on client's standards. Must not pose a safety hazard to employees working in the same general area. Estimated Compensation $140,000 - $155,000 Individual salaries are determined by a variety of factors including but not limited to employee's experience, skills, education, industry, location, company size, and overall market demand. General Description of Benefits and Other Compensation to be Offered: 11 Federal Holidays with Pay Vacation (Personal/sick leave) Medical, Dental, Vision Wellness Participation Weight Loss Reimbursement Health Care Flex Spending Short Term/Long Term Disability Simple IRA (Savings Incentive Match Plan) Basic Life Insurance Tuition Assistance Program Employee Assistance Program (EAP) Other Paid Absences Professional Memberships Overtime Pay Flexible Spending Account (FSA) As an EOE/AA employer, Makai, LLC will not discriminate in its employment practices due to an applicant's race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status.

Job Description Job Description Overview: We are seeking a Lead Systems Specialist to support the Pilot Bioproduction Facility (PBF) at the Walter Reed Army Institute of Research (WRAIR) in Silver Spring, Maryland. PBF is a one-of-a-kind cGMP-compliant pharmaceutical manufacturing facility engaging in next-generation development for cutting-edge companies and government agencies. The professionals at PBF are engaging in trailblazing endeavors every day. Most exciting, the end products vary, so every year brings multiple opportunities for professional enrichment in original projects. CAMRIS International, LLC, is a dynamic medical research and development firm that achieves innovative solutions to health and development challenges through high-quality, cost-effective programs and research management services. We combine our proven systems with today's most effective, evidence-based best practices. Our core practice areas include vaccine research, development, and production; microbiology and infectious disease research; biodefense; clinical research; global health security; and HIV/AIDS programs. Our employees enjoy a collegial environment where individual contributions matter at all levels. At CAMRIS, you will notably improve the lives of people at home and abroad. Responsibilities: Lead data integrity tasks including set up of testing workflows, configuring user access controls, integrating peripherals, setting automated schedules, managing alarms and general software administration tasks. Support cross-Functional teams acting as the main bridge between bench scientists, quality assurance (QA), and IT infrastructure teams. Collaborate with process engineers, scientists, operators, maintenance personnel, and vendors to identify opportunities for automation improvements and operational efficiencies. Communicate effectively, efficiently, and persistently with internal and external stakeholders including WRAIR Information Management Division, the PBF director and CAMRIS staff) Configure, maintain, troubleshoot, and optimize automation and control systems, including PLCs, machine to machine interfaces, and process data backups. Lead automation system design, implementation, commissioning, qualification, operation, and lifecycle management activities. Compliance & Validation: Ensuring data integrity, maintaining audit trails, and supporting GxP or regulatory standards (such as ISO/EPA guidelines). Assist WRAIR Information Management Division (IMD) and PBF end users with troubleshooting and upgrading applications supporting resolution of technical snags, data migrations, writing custom scripts or reports (e.g., LabVantage, Crystal Reports OSIsoft Pi), and managing data integrity through system upgrades. Coordinate with lab personnel to map out testing processes, perform market research, develop user requirement specifications (URS), and review associated software design specifications or functional specifications, as necessary. Develop and maintain system documentation including user requirements specifications (URS), functional specifications, control narratives, configuration details, password management, and backup protocols. Participate in commissioning, startup, and qualification activities including factory acceptance testing (FAT), site acceptance testing (SAT), installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ). Establish software training for end users coordinating with operations, quality and quality assurance teams including authoring SOPs, creating training resources, and leading classroom training sessions at PBF. Lead the setup, configuration, and daily support of LabVantage modules at PBF. Ensure systems meet regulatory standards like GxP, 21 CFR Part 11, and data integrity (ALCOA+) principles. Support GMP manufacturing activities through adherence to quality systems, change management processes, deviation investigations, and corrective and preventive actions (CAPA). Design, implement and document the connections between the LIMS and lab equipment, chromatography data systems, and/or middleware. Compliance & Validation: Ensure systems meet regulatory standards like GxP, 21 CFR Part 11, and data integrity (ALCOA+) principles. Support engineering facilities, calibrations oversight, and shutdown execution at PBF as required. All other duties as required by the supervisor, manager, or program leadership. Qualifications: A Bachelor's degree in Engineering, Computer Science, Information Systems, Chemistry, Biology, or a related scientific/technical field. Understanding of GMP manufacturing practices and regulated computerized systems including data integrity and Good Automated Manufacturing Practice (GAMP) and ICH Q9 (Quality Risk Management). 5+ years working within R&D, MSAT or GMP environments supporting enterprise software or laboratory informatics, with firsthand LIMS administration and/or process automation experience. Experience with PLCs, DCS, SCADA, HMI systems, instrumentation, and industrial communication frameworks such as OPC-UA. Strong background in SQL, data analysis, and understanding of lab and clean core (manufacturing) workflows. Demonstrated oral and written communication with the ability to translate complex lab procedures into logical software requirements using flow-charts, presentations, and good engineering documentation. Experience managing subcontracted integration resources. Preferred Qualifications Familiarity with SQL databases, OSIsoft, and slocal application data stores associated with research, quality control, and manufacturing equipment. Data processing skills using R, python, Microsoft Excel, JMP and OSIsoft PI for quality control charting and multifactorial analysis. AKTA Unicorn method programing and configuration experience. Physical Requirements, Workplace Hazards and Conditions, and PPE and Chemical Requirements The physical requirements, workplace hazards and conditions, and PPE and chemical requirements described here are representative of those that a candidate must meet to perform the essential functions of this job. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential job functions. Physical Demands Occasionally conduct sedentary work that primarily involves sitting/standing. Occasionally conduct light work that includes moving objects up to 20 pounds. Rarely conduct medium work that includes moving objects up to 50 pounds. Rarely conduct heavy work that includes moving objects up to 100 pounds. Rarely conduct very heavy work that includes moving objects over 100 pounds. Occasionally push or pull less than 25 pounds. Rarely push or pull 25 - 45 pounds. Rarely push or pull more than 45 pounds. Rarely reach above shoulder level. Constantly use both hands. Occasionally stand or walk for more than 25 minutes. Occasionally bend, reach, or twist repeatedly. Occasionally kneel, squat, or stoop. Rarely crawl or climb. Occasionally have clear vision (near and/or far), depth perception, peripheral vision, and/or visual acuity. Physical Activities Rarely ascend or descend ladders, stairs, scaffolding, ramps, poles, and the like. Rarely move self in different positions to accomplish tasks in various environments, including tight and confined spaces. Occasionally move about to accomplish tasks or move from one worksite to another. Constantly communicate with others to exchange information. Constantly assess the accuracy, neatness, and thoroughness of the work assigned. Environmental Conditions Occasionally work in low temperatures. Occasionally work in high temperatures. Rarely work in outdoor elements, such as precipitation and wind. Occasionally work in noisy environments. Rarely work in small and/or enclosed spaces. PPE and Chemical Requirements Occasionally wear PPE, including but not limited to gloves, face shields/goggles, safety glasses, and safety shoes. Occasionally wear a lab coat. Rarely wear earplugs/muffs. Occasionally work in a Clean Room Uniform. Occasionally wear a disposable dust/surgical mask. Rarely wear a respirator, such as a disposable respirator mask (N-95), half-face/full-face style, PAPR, SCUBA. Other: Sitting/standing should be managed. Extended screen time is expected. Please submit your resume online at . CAMRIS is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, disability status, or any other characteristic protected by any applicable federal, state, or local law. CAMRIS offers a comprehensive benefits package, including medical, dental, and vision insurance for individuals and families, FSAs, HSA, life and AD&D insurance, short- and long-term disability, legal services, voluntary hospital indemnity, critical illness and accident insurances, EAP, pet insurance, 401(k) with employer match and Roth option, tuition and professional reimbursement, public transportation support in the DMV area, a referral bonus program, vacation with tenure-based increases, PTO, 11 paid holidays . click apply for full job details

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): Communicates safety discrepancies or issues to the Supervisor or Area Manager. Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. Troubleshoot problems with equipment, devices, or products. Monitor and adjust production processes or equipment for quality and productivity. Inspect production for quality and adherence to customer specifications. Monitor SPC charts and use precision measuring instruments to perform quality checks. Place product in boxes, ensuring safe transport to customer. Maintain inventory of job materials and ensure that operators have adequate raw materials and supplies. Be able to read and understand product drawings and specifications. Able to confirm the correct entry of computer input of ticket information. Provide production, progress, or changeover reports to shift supervisors. Write work orders and update journal at end of shift. Interprets company policies and enforces safety regulations. Establishes or adjusts work procedures to meet production schedules. Plans and assists with product changeover and set up for equipment. Selection of proper tooling, fixtures, etc. to set up equipment for production. Set up and verify the functionality of safety equipment; Start up and shut down processing equipment. Recommends measures to improve production methods, equipment performance and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency and safety of the department. Train operators as needed. Measure and record data associated with operating equipment; Provide advice or training to other technicians; select cleaning materials, tools, or equipment. May operate production equipment when needed. Assist engineers in developing, building, or testing prototypes or new products, processes, or procedures. communicates safety discrepancies or issues to the Team Coordinator or Area Manager May input maintenance work orders through Maximo system Reviews internal email and calendar system several times per shift Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and 5S (Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. REQUIRED AND PREFERRED QUALIFICATIONS Required Education and/or Experience Must be able to successfully complete all required job training High school diploma or general education degree (GED) Required Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions. Ability to write reports and business correspondence. Ability to effectively present information and respond to questions from managers. Required Mathematical Skills Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Required Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Preferred Qualifications Fork Lift License and Pallet Jack License Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. The noise level in the work environment is usually moderate; and occasionally loud. VII. SAFETY REQUIREMENTS/PPE Safety shoes must be worn while on NGK property. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions VIII. EMPLOYMENT DISCLAIMER This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description JOB TITLE: Technical Leader I JOB GRADE: NE10 FLSA STATUS: Nonexempt DEPARTMENT NAME: NGKACU DEPARTMENT NUMBER: NGKACU REPORTS TO: Supervisor I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Supervisor or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description Date Posted: 6-12-2026 Date Removed: 6-19-2026 Position: Continuous Tech Lead Department: Continuous Pay Grade: NE10 Shift: D-Shift (7:30PM-7:45AM 4on / 4off) Reminder: If you apply for a position and it is offered to you, and you decline the position, you will have to wait 6 months after posting for another position. Posting for a position after the deadline will disqualify you. (If posting is not able to be removed as soon as the 5pm deadline.) LATERAL MOVES ARE NOW ALLOWED WITH THE REVISED JOB BID SYSTEM. This requisition will be posted on the NGK recruiting board for 7 days. Members should also consider the following requirements after applying for a position. You must be on your current job for one (1) year if your job grade is 7 or lower. You must be in your current job for a minimum of two (2) years for job grades 8 or higher due to the more technical nature of the jobs. No disciplinary actions within the last year (low level points warnings may be waived if there are special circumstances that can be, or are, documented). Meet the minimum requirements of the open job description. Completion of the current learner's assessment and other training requirements. Completed Career Readiness Certificate (CRC). Members should be mindful of the shift, area, and job duties after applying for a job so as not to risk a six-month waiting period to apply for a future opportunity. The members should carefully consider all these factors to avoid rejecting a job offer. I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Team Coordinator or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 4 of 4 Effective Date: 07.23.2018 D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. VI. WORK ENVIRONMENT A. While performing the duties of this job . click apply for full job details

Job Description Job Description JOB TITLE: Technical Leader I JOB GRADE: NE10 FLSA STATUS: Nonexempt DEPARTMENT NAME: NGKACU DEPARTMENT NUMBER: NGKACU REPORTS TO: Supervisor I. POSITION SUMMARY Technical leaders concentrate on the technical aspects of the production process, verifying correct setup and changeover, resolving production or equipment problems and reviewing quality of work. II. ESSENTIAL DUTIES AND RESPONSIBILITIES (The section is not intended to be an all-inclusive list and NGK Ceramics reserves the right to include other duties as assigned): A. Communicates safety discrepancies or issues to the Supervisor or Area Manager. B. Assists with product changeover and set up production equipment and verifies the functionality of safety equipment in accordance with current good manufacturing practices and standard operating procedures. C. Troubleshoots problems with equipment, devices, or products. D. Monitors and adjusts production processes or equipment for quality and productivity. E. Inspects production for quality and adherence to customer specifications. F. Monitors SPC charts and uses precision measuring instruments to perform quality checks. G. Maintains inventory of job materials and ensures that operators have adequate raw materials and supplies. H. Confirms the correct entry of computer input of ticket information. I. Provides production, progress, or changeover reports to shift supervisors. J. Writes work orders and updates journal at end of shift. K. Follows company policies and enforces safety regulations. L. Follows work procedures to meet production schedules. M. Recommends measures to improve production methods, equipment performance and quality of product. N. Suggests changes in working conditions and use of equipment to increase efficiency and safety in the department. O. Trains operators as needed. P. Measures and records data associated with operating equipment; provides advice or training to employees in the assigned area; and selects cleaning materials, tools, or equipment. Q. Operates production equipment, when needed. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 2 of 4 Effective Date: 07.23.2018 R. Assists engineers in developing, building, or testing prototypes or new products, processes, or procedures. S. Communicates safety discrepancies or issues to the Supervisor or Area Manager T. Inputs maintenance work orders through Maximo system U. Reviews internal email and calendar system several times per shift V. Participates in PM (Preventive Maintenance), MMOL (Machine Maintenance Operator Leader), and G5S (Global 5S: Sort, Set in Order, Shine, Standardize, Sustain), and Kaizen activities, as needed W. Follows all EMS (Environmental Management System) procedures, including the disposal of waste and used materials X. This job has no supervisory responsibilities and no direct reports. III. REQUIRED COMPETENCIES A. Customer Focus: Knows and anticipates relevant internal / external customer needs and acts accordingly; gives high priority to customer service; seeks to understand customer expectations; consistently demonstrates extra effort to insure customer satisfaction. B. Environmental Awareness and Compliance: Understands and follows established personal safety, security and environmental practices; complies with local, federal and company health, safety, security and environmental regulations; and identifies unsafe or unsecure conditions and take corrective actions. C. Functional & Technical Expertise and Computer Skills: Acquiring and applying functional knowledge in one's own area of specialty (not technical e.g., Finance, HR Management); acquiring and applying technical and functional knowledge in one's own technological area of specialty; using a personal computer and related applications to convey and retrieve information. D. Integrity and Accountability: Acts with integrity; adheres to stated core values and beliefs; accepts responsibility for his/her actions and decisions; is trusted; seen as a direct, truthful individual; admits mistakes; doesn't misrepresent him/herself for personal gain. E. Organizational Awareness: Having and using knowledge of systems, situations, procedures, and culture inside the organization to identify potential problems and opportunities; perceiving the impact and the implications of decisions on other components of the organization. F. Respect and Humility: Approaches others with respect and humility; shows respect for other's feelings, attitudes, reasoning and opinion; recognizes the value of diversity; emphasizes team success above personal gain; responds well to constructive criticism. G. Safety Orientation: Practices safe behavior; follows safety policies and guidelines; embraces activities that will promote member safety; adheres to personal and team safety regulations; actively participates and supports company safety initiatives; expects and communicates adherence to safety standards from members at all levels. H. Teamwork: Recognizes and appreciates the use of the combined efforts of the group of members, working effectively and efficiently to achieve goals and objectives safely. NGK CERAMICS USA, INC. JOB DESCRIPTION Job Code: 2101 Page 3 of 4 Effective Date: 07.23.2018 IV. REQUIRED AND PREFERRED QUALIFICATIONS A. Required Education and/or Experience 1. Must be able to successfully complete all required job training 2. High school diploma or general education degree (GED) 3. 6 month manufacturing/warehousing experience or equivalent 4. CRC Bronze or above B. Required Language Skills 1. Ability to read and interpret documents such as safety rules, operating and emergency procedure, and maintenance instructions. 2. Ability to write reports and business correspondence. 3. Ability to effectively present information and respond to questions from managers. C. Required Mathematical Skills 1. Ability to add and subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. D. Required Reasoning Ability 1. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 2. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form E. Preferred Qualifications 1. Fork Lift License and Pallet Jack License 2. Knowledge of database software; inventory software; manufacturing software; spreadsheet software; and word processing software 3. Certified Production Technician program completion V. PHYSICAL DEMANDS (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and will be determined on a case by case basis): A. While performing the duties of this job, the employee may be regularly required to stand; sit; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. B. The employee may be occasionally required to climb or balance; and stoop, kneel or crouch. C. The employee may occasionally lift and /or move up to 50 pounds. The employee may be required to occasionally use a pallet jack to move 400-500 pounds. D. The employee may be required to successfully pass scheduled testing for vision, hearing, respirator fitting and spirometry. WORK ENVIRONMENT A. While performing the duties of this job, the employee may be frequently exposed to wet or humid conditions; work near moving mechanical parts; fumes or airborne particles; toxic or caustic chemicals; outdoor weather conditions; extreme heat; and vibration. B. The noise level in the work environment is usually moderate; and occasionally loud. SAFETY REQUIREMENTS/PPE A. Safety shoes must be worn while on NGK property. B. The employee will work in multiple areas and will abide by any safety requirements; hearing, head and eye protection are required in designated areas or under prescribed work conditions. EMPLOYMENT DISCLAIMER A. This job description is not to be considered a written contract. Employment with NGK is at will. This means that the employee, as well as the company, is free to terminate the employment relationship at any time and for any reason not prohibited by law. Also, this job description is not designed to be a complete listing of the tasks, duties or responsibilities that are required of the employee.

Job Description Job Description Shape How Products Are Made Join an industry-leading manufacturing team as the engineer who turns complex ideas into repeatable, high-quality production. As our Injection Molding Process & Automation Engineer, you'll develop and refine process standards, elevate quality systems, and launch improvements that impact both current and next-generation products on the plant floor. A day in the life Morning starts with a quick scan of quality dashboards and production KPIs. You walk the molding cells, check fill/pack/hold profiles, and review last night's alarms. A Fanuc robot needs a minor path tweak to prevent part scuffing-done. Before lunch, you design a DOE to validate a new resin parameter window. Afternoon brings a cross-functional huddle with maintenance and operators to lock in a stable, documented process for a new tool. You finish by capturing lessons learned and updating work instructions. What you will do Develop, document, and optimize molding and assembly processes that improve yield, cycle time, and part quality for both existing and new products. Own quality procedures on the line: apply data-driven problem solving, SPC, and corrective actions to reduce scrap and variability. Program, adjust, and troubleshoot industrial robots (Fanuc highly preferred) to ensure safe, reliable, and efficient part handling. Lead structured experiments (DOE) to establish robust processing windows and validate changes. Diagnose and resolve issues with industrial automation and auxiliary equipment alongside maintenance and production teams. Standardize work and train operators/technicians on best practices and new procedures. Schedule & employment Direct-hire role (no contract or temp period) Monday-Friday, 8:00 a.m.-5:00 p.m. with flexible scheduling What you bring Bachelor's degree. Hands-on manufacturing experience; automotive background preferred. Experience as a Process Technician and/or Process Engineer. Injection molding expertise, including start-up, setup, and parameter optimization. Industrial robot programming skills; Fanuc experience strongly preferred. Proven troubleshooting ability for industrial automation equipment. Process engineering fundamentals, production optimization, and quality control data analysis. Process development experience and competency with Design of Experiments (DOE). Equipment you'll encounter Injection molding machines: Nissei, Sodick, Arburg Industrial robots: Fanuc

Job Description Job Description Lead / Principal Process ML Engineer Job Title: Lead / Principal Process ML Engineer Job Type: Full-time Location: San Diego, CA Summary We are building AI platforms that run on real factory floors, predicting, optimizing, and controlling manufacturing processes in real time. This role is needed to expand our process optimization capability - we need a technical leader who can own the full lifecycle of ML-driven process optimization products, from causal modeling to productization and customer deployment. Currently there is no dedicated technical lead for this product area, and growing customer demand requires a senior leader to set the technical vision and drive execution. Roles and Responsibilities Own the technical direction for key projects - set vision, define what to build, manage priorities, and be accountable for delivery Lead development of ML-driven process optimization products - from causal modeling to productization and customer deployment Make architecture decisions: select modeling approaches, define system boundaries, and evaluate trade-offs between physical fidelity, inference speed, and product constraints Define modeling strategy - decide which physics to encode, which architectures to use, and how to validate against real process data Drive architecture reviews and technical decision-making across the process optimization team Hire, mentor, and grow engineers - build a high-performing team through hiring, code reviews, and technical coaching Coordinate across HQ (Seoul) and overseas R&D labs - aligning research with product roadmaps across time zones Own production-grade delivery - models must run reliably inside equipment operating 24/7 on customer lines Requirements Doctorate (Ph.D.) Mechanical Engineering, Physics, Computer Science, Electrical Engineering, or a related field 8+ years of industry experience post-Ph.D. Proven track record of shipping process optimization or control products from problem definition through customer-facing deployment Experience leading a technical team - setting direction, managing delivery, and making architecture decisions Strong physics foundation (fluid dynamics, thermodynamics, heat transfer, mechanics) Strong ML skills (PyTorch, custom architectures, PINNs, neural operators, surrogate models) Ability to bridge physics and product - translate process understanding into model design and product features Comfort with ambiguity: able to define the problem and the approach, not just execute a spec Experience shipping ML-driven process optimization or control products in an industry setting Experience leading or managing a technical team (ML or applied science) Experience with production software systems - ML integration, data pipelines, deployment infrastructure Preferred Requirements Prior role as Tech Lead, Staff Engineer, or Team Lead in an ML or applied science team Experience productizing process optimization as a commercial product deployed on customer sites Hands-on manufacturing process experience - semiconductor, SMT, electronics assembly, or precision manufacturing Experience coordinating technical direction across distributed teams (HQ + overseas R&D) Published work in scientific machine learning, computational physics, or neural operators Experience with SPC, Cpk analysis, or 3D inspection/metrology systems Benefits • Health/Dental/Vision/Life Insurance at no employee premium (including dependent coverage) • 401K retirement plan with 5% matching • Generous PTO and paid holidays

Job Description Job Description CMM Programmer Skokie, IL (On-site) Schedule: 1st shift, 7:00 AM to 3:30 PM, Monday through Friday Pay: $30 - $40 and up to 15 hours of optional overtime per week About the Role A well-established manufacturer of electrical and mechanical components is looking for an experienced CMM Programmer to join a small, collaborative quality team. This is a fully onsite, hands-on role responsible for first-piece inspection on CNC setups, vendor incoming inspection, and full assembly checks across a diverse mix of machined and purchased parts. The facility runs Brown and Sharpe DCC CMMs across three models. Existing programs need operator-friendly revisions and new programs will be written as production requires. As the operation grows, this person will also train CMM operators, making communication and a collaborative mindset just as important as technical skill. About the Company This is a stable, well-respected manufacturer with a product mix spanning both commercial and defense markets. The team is tight-knit and the culture values people who show up, contribute, and make those around them better. Overtime is available but never forced. The company invests in its people, and the right candidate will have room to grow. Responsibilities Write, revise, and maintain CMM programs in PC-DMIS across multiple Brown and Sharpe DCC units Perform first-piece inspections for CNC machining setups and vendor incoming inspection Conduct full assembly inspections including GD&T evaluation on complex assemblies Revise existing programs to make them more operator-friendly and efficient Assess current CMM equipment and make recommendations on controller replacement as needed Train CMM operators as headcount is added to the team Operate CMMs directly until operators are onboarded and running independently Troubleshoot inspection and programming issues independently and communicate findings clearly Maintain accurate inspection records and support quality and production teams as needed Requirements High school diploma required; AAS degree or related CMM programming certification is preferred 1-2+ years of PC-DMIS programming experience required PC-DMIS proficiency is required; Calypso experience is a plus Metal fabrication, machining, or related manufacturing industry experience is required; defense, military, or aerospace experience is strongly preferred ITAR familiarity preferred Hands-on competency with manual metrology tools including micrometers, height gauges, and related instruments Experience inspecting machined components, castings, and assemblies with GD&T requirements Ability to work independently, troubleshoot, and manage multiple inspection priorities Team player with a positive attitude and a genuine willingness to both train others and continue learning US citizen or green card holder required Benefits Comprehensive benefits package Stable, onsite role with a consistent schedule and a collaborative team culture This is a role for someone who takes quality personally, communicates well, and wants to be a valued part of a team that depends on their expertise every day. If that describes you, apply now and let's talk. Company Description The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most. With 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change. At JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier. Company Description The team at JSK Recruiting, Inc. prides itself on providing boutique-level services combined with the resources of a larger recruiting firm. We forgo the traditional nine-to-five workday model in favor of complete accessibility. We are here for our clients and candidates when they need us most. With 12 years of experience in the field of supply chain and manufacturing recruiting, we maintain the relationships that employers are looking for in a recruiting firm as well as those that talented professionals need when they are ready to make a career change. At JSK Recruiting, we provide complete recruiting services, from sourcing candidates to organizing the interview process. Finding both long-term employees and rewarding careers across manufacturing and supply chain positions has never been easier.

Our client in the New Kensington, PA area is seeking a CNC Machine Operator/Programmer. -Set up and operate CNC lathes and machining equipment -Program and edit CNC programs using G-code -Read blueprints, engineering drawings, and GD&T -Perform tooling changes, offsets, and machine adjustments -Inspect finished parts using precision measuring tools -Troubleshoot machining and programming issues -Maintain production efficiency and quality standards -Follow all safety procedures and company policies -2+ years of CNC setup and programming experience -Experience with: Haas Mazak Mori Seiki Puma lathes -Strong understanding of CNC machining practices -Ability to read blueprints and use measuring instruments -Technical school or machining background preferred -Live tooling and multi-axis machining experience preferred -CAD/CAM programming -Production machining environment experience By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Job Title: CNC Lathe Machinist - Setup/Programmer Marketing Message Join a growing, ISO-certified high-tech manufacturing company in Northern New Jersey producing precision components. Be part of a skilled team where your machining expertise drives quality and innovation. Key Responsibilities Set up, program, and operate CNC lathes including prove-out, first-piece inspection, and in-process checks Select tooling, define parameters, and maintain machine performance and reliability Collaborate with engineering and production teams to troubleshoot and resolve machining issues Ensure compliance with ISO standards and maintain accurate production and inspection documentation Required Skills & Experience 3+ years of CNC lathe machining experience in a manufacturing environment Strong knowledge of CNC setup, editing, and G & M code programming Ability to machine various materials including stainless steel and other metals Proficiency in blueprint reading with GD&T and use of precision measurement tools Preferred Skills & Experience Experience with Mastercam and multi-axis machining (2D/3D) Familiarity with ISO 9001 standards and OSHA safety practices Compensation $25-$26 per hour, plus opportunities for growth within a stable and expanding organization. Call to Action Apply today to advance your machining career with a cutting-edge manufacturer! Disclaimer By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at Anthony Borbely Synerfac Technical Staffing p: f:

Job Description Job Description Location: Poway, CA Job Type: Full-time (40 hours/week), Non-exempt (hourly), In-Person Department: Quality Reports To: Quality Manager About the Role: The purpose of this position is to support the Quality Departments ability to achieve its goals. This includes accurate and timely programming and inspection of parts as well as review of incoming material, work-in-process and customer shipments to achieve AMT quality and business objectives and comply with AS9100 standards. Other duties may be assigned as needed. Key Responsibilities: Load parts, fixtures, and probes; execute existing CMM programs. Write, develop, validate and debug measuring machine programs and provide the supporting documentation for CMM inspections. Communicate with all machinists, supervisors, and engineers to meet customer/shop floor needs. Troubleshoot and solve both machine issues and related problems in the measuring process. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to AMT, customer and AS9100 standards. Complete customer PPAP requirements including control plans and inspection reports. Perform incoming material inspection tasks according to AS 9100 procedures and counterfeit awareness per AS6174. Perform final inspection according to AS 9100 procedures. Perform process and manufacturing audits and follow-up with corrective actions. Cross train across multiple departments as needed. Perform data collection and communication tasks in ERP and other applications. Comply with all Advanced Machining and Tooling policies and procedures Other duties as assigned. Qualifications: 3+ years of CMM operating and 1+ years of CMM programming. Strong specific knowledge of blueprint reading, GD&T, setup, tooling and fixture techniques. Ability to create inspection reports, perform 1st article/in-process/final inspection reports. Knowledge of inspection tool usage such as Micrometers, Calipers etc. Good typing skills and ability to use software such as word, excel etc. Knowledge of how CAD models work. Demonstrated critical thinking abilities and root cause analysis. Strong attention to detail and accuracy. Proficient use of shop arithmetic and strong math skills. Awareness of general safety, and quality systems. High School Diploma or GED. Nice to Have: Bachelor's degree in mechanical engineering or related discipline. Rock skills. Specific applied knowledge of aerospace quality procedures and AS9100. Knowledge of non-destructive testing, metal finish processes, Metallurgy and heat treatment processes Working knowledge of CNC machining, tool, fixture, work-holding and die design. Ability to understand CMM reports. Total Rewards Package The hourly pay range for this position is $30 - $45 per hour (depending on experience). This is a permanent, non-exempt (hourly), full-time position. Medical Coverage Dental Coverage Vision Coverage 10 days paid vacation annually 5 days of paid sick leave annually 401K Plan with matching 12 Paid Holidays Additional Benefits: Flexible spending account Life insurance Parental leave Professional development assistance Employee Assistance Program Work Authorization/Security Clearance The company requires access to information, or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other US government security regulations. These laws do not permit access rights to non-US citizens, or to other unauthorized individuals. This position is subject to a background check, drug test, and reference check. Must be a United States Citizen, or US Permanent Resident. AAP/EEO Statement Advanced Machining and Tooling LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Ability to commute/relocate to work location: Poway, CA 92064: Reliably commute or planning to relocate before starting work (Required) Why Join Us: AMT is a place full of hardworking people creating things. We are service orientated and work to always take good care of our customers and our people. It's also a place where people are given opportunities to learn and grow with the support of our hi Monday - Friday 7:00 AM - 3:30 PM PST 40 hours weekly with the potential for optional overtime